commit 46a525e199 upstream.
This isn't a reliable mechanism to tell if we have task_work pending, we
really should be looking at whether we have any items queued. This is
problematic if forward progress is gated on running said task_work. One
such example is reading from a pipe, where the write side has been closed
right before the read is started. The fput() of the file queues TWA_RESUME
task_work, and we need that task_work to be run before ->release() is
called for the pipe. If ->release() isn't called, then the read will sit
forever waiting on data that will never arise.
Fix this by io_run_task_work() so it checks if we have task_work pending
rather than rely on TIF_NOTIFY_SIGNAL for that. The latter obviously
doesn't work for task_work that is queued without TWA_SIGNAL.
Reported-by: Christiano Haesbaert <haesbaert@haesbaert.org>
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/issues/665
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 272970be3d ]
The driver shutdown callback (which sends EDL_SOC_RESET to the device
over serdev) should not be invoked when HCI device is not open (e.g. if
hci_dev_open_sync() failed), because the serdev and its TTY are not open
either. Also skip this step if device is powered off
(qca_power_shutdown()).
The shutdown callback causes use-after-free during system reboot with
Qualcomm Atheros Bluetooth:
Unable to handle kernel paging request at virtual address
0072662f67726fd7
...
CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W
6.1.0-rt5-00325-g8a5f56bcfcca #8
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
tty_driver_flush_buffer+0x4/0x30
serdev_device_write_flush+0x24/0x34
qca_serdev_shutdown+0x80/0x130 [hci_uart]
device_shutdown+0x15c/0x260
kernel_restart+0x48/0xac
KASAN report:
BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50
Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1
CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted
6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
dump_backtrace.part.0+0xdc/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x68/0x84
print_report+0x188/0x488
kasan_report+0xa4/0xf0
__asan_load8+0x80/0xac
tty_driver_flush_buffer+0x1c/0x50
ttyport_write_flush+0x34/0x44
serdev_device_write_flush+0x48/0x60
qca_serdev_shutdown+0x124/0x274
device_shutdown+0x1e8/0x350
kernel_restart+0x48/0xb0
__do_sys_reboot+0x244/0x2d0
__arm64_sys_reboot+0x54/0x70
invoke_syscall+0x60/0x190
el0_svc_common.constprop.0+0x7c/0x160
do_el0_svc+0x44/0xf0
el0_svc+0x2c/0x6c
el0t_64_sync_handler+0xbc/0x140
el0t_64_sync+0x190/0x194
Fixes: 7e7bbddd02 ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2be43abac5 ]
Currently qca_suspend() is relied on IBS mechanism. During
FW download and memory dump collections, IBS will be disabled.
In those cases, driver will allow suspend and still uses the
serdev port, which results to errors. Now added a wait timeout
if suspend is triggered during FW download and memory collections.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Stable-dep-of: 272970be3d ("Bluetooth: hci_qca: Fix driver shutdown on closed serdev")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3de5616d3 ]
After applying an engine reset, on some platforms like Jasperlake, we
occasionally detect that the engine state is not cleared until shortly
after the resume. As we try to resume the engine with volatile internal
state, the first request fails with a spurious CS event (it looks like
it reports a lite-restore to the hung context, instead of the expected
idle->active context switch).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212161338.1007659-1-andi.shyti@linux.intel.com
(cherry picked from commit 3db9d59055)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f680609bf ]
Turn on power early to avoid wrong state for power relation register.
This can earlier update JD state when resume back.
Signed-off-by: Yuchi Yang <yangyuchi66@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e35d8f4fa18f4448a2315cc7d4a3715f@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e006ac3003 ]
After [1][2], if we catch exceptions due to EFI runtime service, we will
clear EFI_RUNTIME_SERVICES bit to disable EFI runtime service, then the
subsequent routine which invoke the EFI runtime service should fail.
But the userspace cat efivars through /sys/firmware/efi/efivars/ will stuck
and infinite loop calling read() due to efivarfs_file_read() return -EINTR.
The -EINTR is converted from EFI_ABORTED by efi_status_to_err(), and is
an improper return value in this situation, so let virt_efi_xxx() return
EFI_DEVICE_ERROR and converted to -EIO to invoker.
Cc: <stable@vger.kernel.org>
Fixes: 3425d934fc ("efi/x86: Handle page faults occurring while running EFI runtime services")
Fixes: 23715a26c8 ("arm64: efi: Recover from synchronous exceptions occurring in firmware")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7633355e5c upstream.
If nilfs2 reads a corrupted disk image and tries to reads a b-tree node
block by calling __nilfs_btree_get_block() against an invalid virtual
block address, it returns -ENOENT because conversion of the virtual block
address to a disk block address fails. However, this return value is the
same as the internal code that b-tree lookup routines return to indicate
that the block being searched does not exist, so functions that operate on
that b-tree may misbehave.
When nilfs_btree_insert() receives this spurious 'not found' code from
nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was
successful and continues the insert operation using incomplete lookup path
data, causing the following crash:
general protection fault, probably for non-canonical address
0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
...
RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline]
RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline]
RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238
Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89
ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c
28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02
...
Call Trace:
<TASK>
nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline]
nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147
nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101
__block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991
__block_write_begin fs/buffer.c:2041 [inline]
block_write_begin+0x93/0x1e0 fs/buffer.c:2102
nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261
generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
__generic_file_write_iter+0x176/0x400 mm/filemap.c:3900
generic_file_write_iter+0xab/0x310 mm/filemap.c:3932
call_write_iter include/linux/fs.h:2186 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
</TASK>
This patch fixes the root cause of this problem by replacing the error
code that __nilfs_btree_get_block() returns on block address conversion
failure from -ENOENT to another internal code -EINVAL which means that the
b-tree metadata is corrupted.
By returning -EINVAL, it propagates without glitches, and for all relevant
b-tree operations, functions in the upper bmap layer output an error
message indicating corrupted b-tree metadata via
nilfs_bmap_convert_error(), and code -EIO will be eventually returned as
it should be.
Link: https://lkml.kernel.org/r/000000000000bd89e205f0e38355@google.com
Link: https://lkml.kernel.org/r/20230105055356.8811-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ede796cecd5296353515@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a608da3bd7 upstream.
Using REQ_OP_ZONE_APPEND operations for synchronous writes to sequential
files succeeds regardless of the zone write pointer position, as long as
the target zone is not full. This means that if an external (buggy)
application writes to the zone of a sequential file underneath the file
system, subsequent file write() operation will succeed but the file size
will not be correct and the file will contain invalid data written by
another application.
Modify zonefs_file_dio_append() to check the written sector of an append
write (returned in bio->bi_iter.bi_sector) and return -EIO if there is a
mismatch with the file zone wp offset field. This change triggers a call
to zonefs_io_error() and a zone check. Modify zonefs_io_error_cb() to
not expose the unexpected data after the current inode size when the
errors=remount-ro mode is used. Other error modes are correctly handled
already.
Fixes: 02ef12a663 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 39f501d68e ]
Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but
if end users hit such problem, there will be no chance that
btrfs_debug() is enabled. This can lead to very little useful info for
debugging.
This patch will:
- Add extra info for error reporting
Including:
* logical bytenr
* num_bytes
* type
* action
* ref_mod
- Replace the btrfs_debug() with btrfs_err()
- Move the error reporting into run_one_delayed_ref()
This is to avoid use-after-free, the @node can be freed in the caller.
This error should only be triggered at most once.
As if run_one_delayed_ref() failed, we trigger the error message, then
causing the call chain to error out:
btrfs_run_delayed_refs()
`- btrfs_run_delayed_refs()
`- btrfs_run_delayed_refs_for_head()
`- run_one_delayed_ref()
And we will abort the current transaction in btrfs_run_delayed_refs().
If we have to run delayed refs for the abort transaction,
run_one_delayed_ref() will just cleanup the refs and do nothing, thus no
new error messages would be output.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56c5dab20a ]
Since gcc13, each member of an enum has the same type as the enum [1]. And
that is inherited from its members. Provided these two:
SRP_TAG_NO_REQ = ~0U,
SRP_TAG_TSK_MGMT = 1U << 31
all other members are unsigned ints.
Esp. with SRP_MAX_SGE and SRP_TSK_MGMT_SQ_SIZE and their use in min(),
this results in the following warnings:
include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
drivers/infiniband/ulp/srp/ib_srp.c:563:42: note: in expansion of macro 'min'
include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
drivers/infiniband/ulp/srp/ib_srp.c:2369:27: note: in expansion of macro 'min'
So move the large values away to a separate enum, so that they don't
affect other members.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113
Link: https://lore.kernel.org/r/20221212120411.13750-1-jirislaby@kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9deb1e9fb8 ]
It's not very useful to copy back an empty ethtool_stats struct and
return 0 if we didn't actually have any stats. This also allows for
further simplification of this function in the future commits.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c262f75cb6 ]
The virtio_device vqs_list spinlocks must be initialized before use to
prevent functions that manipulate the device virtualqueues, such as
vring_new_virtqueue(), from blocking indefinitely.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Message-Id: <20221012062949.1526176-1-ricardo.canuelo@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cedebd74cf ]
Verify that nullness information is not porpagated in the branches
of register to register JEQ and JNE operations if one of them is
PTR_TO_BTF_ID. Implement this in C level so we can use CO-RE.
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221222024414.29539-2-sunhao.th@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6b9d2fa00 ]
When there is a single DS no striping constraints need to be placed on
the IO. When such constraint is applied then buffered reads don't
coalesce to the DS's rsize.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e6db6f9398 upstream.
We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.
Fixes: af82425c6a ("io_uring/io-wq: free worker if task_work creation is canceled")
Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af82425c6a upstream.
If we cancel the task_work, the worker will never come into existance.
As this is the last reference to it, ensure that we get it freed
appropriately.
Cc: stable@vger.kernel.org
Reported-by: 진호 <wnwlsgh98@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5253125831 ]
Userspace can guess the handle value and try to race GEM object creation
with handle close, resulting in a use-after-free if we dereference the
object after dropping the handle's reference. For that reason, dropping
the handle's reference must be done *after* we are done dereferencing
the object.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Fixes: 62fb7a5e10 ("virtio-gpu: add 3d/virgl support")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216233355.542197-2-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 703c13fe3c ]
In cases where runtime services are not supported or have been disabled,
the runtime services workqueue will never have been allocated.
Do not try to destroy the workqueue unconditionally in the unlikely
event that EFI initialisation fails to avoid dereferencing a NULL
pointer.
Fixes: 98086df8b7 ("efi: add missed destroy_workqueue when efisubsys_init fails")
Cc: stable@vger.kernel.org
Cc: Li Heng <liheng40@huawei.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2c3ccbd00 ]
When CONFIG_ARM64_LSE_ATOMICS=y, each use of an LL/SC atomic results in
a fragment of code being generated in a subsection without a clear
association with its caller. A trampoline in the caller branches to the
LL/SC atomic with with a direct branch, and the atomic directly branches
back into its trampoline.
This breaks backtracing, as any PC within the out-of-line fragment will
be symbolized as an offset from the nearest prior symbol (which may not
be the function using the atomic), and since the atomic returns with a
direct branch, the caller's PC may be missing from the backtrace.
For example, with secondary_start_kernel() hacked to contain
atomic_inc(NULL), the resulting exception can be reported as being taken
from cpus_are_stuck_in_kernel():
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004
| CM = 0, WnR = 0
| [0000000000000000] user address but active_mm is swapper
| Internal error: Oops: 96000004 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.19.0-11219-geb555cb5b794-dirty #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : cpus_are_stuck_in_kernel+0xa4/0x120
| lr : secondary_start_kernel+0x164/0x170
| sp : ffff80000a4cbe90
| x29: ffff80000a4cbe90 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
| x20: 0000000000000001 x19: 0000000000000001 x18: 0000000000000008
| x17: 3030383832343030 x16: 3030303030307830 x15: ffff80000a4cbab0
| x14: 0000000000000001 x13: 5d31666130663133 x12: 3478305b20313030
| x11: 3030303030303078 x10: 3020726f73736563 x9 : 726f737365636f72
| x8 : ffff800009ff2ef0 x7 : 0000000000000003 x6 : 0000000000000000
| x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000100
| x2 : 0000000000000000 x1 : ffff0000029bd880 x0 : 0000000000000000
| Call trace:
| cpus_are_stuck_in_kernel+0xa4/0x120
| __secondary_switched+0xb0/0xb4
| Code: 35ffffa3 17fffc6c d53cd040 f9800011 (885f7c01)
| ---[ end trace 0000000000000000 ]---
This is confusing and hinders debugging, and will be problematic for
CONFIG_LIVEPATCH as these cases cannot be unwound reliably.
This is very similar to recent issues with out-of-line exception fixups,
which were removed in commits:
35d67794b8 ("arm64: lib: __arch_clear_user(): fold fixups into body")
4012e0e227 ("arm64: lib: __arch_copy_from_user(): fold fixups into body")
139f9ab73d ("arm64: lib: __arch_copy_to_user(): fold fixups into body")
When the trampolines were introduced in commit:
addfc38672 ("arm64: atomics: avoid out-of-line ll/sc atomics")
The rationale was to improve icache performance by grouping the LL/SC
atomics together. This has never been measured, and this theoretical
benefit is outweighed by other factors:
* As the subsections are collapsed into sections at object file
granularity, these are spread out throughout the kernel and can share
cachelines with unrelated code regardless.
* GCC 12.1.0 has been observed to place the trampoline out-of-line in
specialised __ll_sc_*() functions, introducing more branching than was
intended.
* Removing the trampolines has been observed to shrink a defconfig
kernel Image by 64KiB when building with GCC 12.1.0.
This patch removes the LL/SC trampolines, meaning that the LL/SC atomics
will be inlined into their callers (or placed in out-of line functions
using regular BL/RET pairs). When CONFIG_ARM64_LSE_ATOMICS=y, the LL/SC
atomics are always called in an unlikely branch, and will be placed in a
cold portion of the function, so this should have minimal impact to the
hot paths.
Other than the improved backtracing, there should be no functional
change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220817155914.3975112-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 031af50045 ("arm64: cmpxchg_double*: hazard against entire exchange variable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e6082e94a ]
The code for the atomic ops is formatted inconsistently, and while this
is not a functional problem it is rather distracting when working on
them.
Some have ops have consistent indentation, e.g.
| #define ATOMIC_OP_ADD_RETURN(name, mb, cl...) \
| static inline int __lse_atomic_add_return##name(int i, atomic_t *v) \
| { \
| u32 tmp; \
| \
| asm volatile( \
| __LSE_PREAMBLE \
| " ldadd" #mb " %w[i], %w[tmp], %[v]\n" \
| " add %w[i], %w[i], %w[tmp]" \
| : [i] "+r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) \
| : "r" (v) \
| : cl); \
| \
| return i; \
| }
While others have negative indentation for some lines, and/or have
misaligned trailing backslashes, e.g.
| static inline void __lse_atomic_##op(int i, atomic_t *v) \
| { \
| asm volatile( \
| __LSE_PREAMBLE \
| " " #asm_op " %w[i], %[v]\n" \
| : [i] "+r" (i), [v] "+Q" (v->counter) \
| : "r" (v)); \
| }
This patch makes the indentation consistent and also aligns the trailing
backslashes. This makes the code easier to read for those (like myself)
who are easily distracted by these inconsistencies.
This is intended as a cleanup.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211210151410.2782645-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 031af50045 ("arm64: cmpxchg_double*: hazard against entire exchange variable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe1f071438 ]
When the user moves a running task to a new rdtgroup using the task's
file interface or by deleting its rdtgroup, the resulting change in
CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the
task(s) CPUs.
x86 allows reordering loads with prior stores, so if the task starts
running between a task_curr() check that the CPU hoisted before the
stores in the CLOSID/RMID update then it can start running with the old
CLOSID/RMID until it is switched again because __rdtgroup_move_task()
failed to determine that it needs to be interrupted to obtain the new
CLOSID/RMID.
Refer to the diagram below:
CPU 0 CPU 1
----- -----
__rdtgroup_move_task():
curr <- t1->cpu->rq->curr
__schedule():
rq->curr <- t1
resctrl_sched_in():
t1->{closid,rmid} -> {1,1}
t1->{closid,rmid} <- {2,2}
if (curr == t1) // false
IPI(t1->cpu)
A similar race impacts rdt_move_group_tasks(), which updates tasks in a
deleted rdtgroup.
In both cases, use smp_mb() to order the task_struct::{closid,rmid}
stores before the loads in task_curr(). In particular, in the
rdt_move_group_tasks() case, simply execute an smp_mb() on every
iteration with a matching task.
It is possible to use a single smp_mb() in rdt_move_group_tasks(), but
this would require two passes and a means of remembering which
task_structs were updated in the first loop. However, benchmarking
results below showed too little performance impact in the simple
approach to justify implementing the two-pass approach.
Times below were collected using `perf stat` to measure the time to
remove a group containing a 1600-task, parallel workload.
CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads)
# mkdir /sys/fs/resctrl/test
# echo $$ > /sys/fs/resctrl/test/tasks
# perf bench sched messaging -g 40 -l 100000
task-clock time ranges collected using:
# perf stat rmdir /sys/fs/resctrl/test
Baseline: 1.54 - 1.60 ms
smp_mb() every matching task: 1.57 - 1.67 ms
[ bp: Massage commit message. ]
Fixes: ae28d1aae4 ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR")
Fixes: 0efc89be94 ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221220161123.432120-1-peternewman@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0ad6dc896 ]
James reported in [1] that there could be two tasks running on the same CPU
with task_struct->on_cpu set. Using task_struct->on_cpu as a test if a task
is running on a CPU may thus match the old task for a CPU while the
scheduler is running and IPI it unnecessarily.
task_curr() is the correct helper to use. While doing so move the #ifdef
check of the CONFIG_SMP symbol to be a C conditional used to determine
if this helper should be used to ensure the code is always checked for
correctness by the compiler.
[1] https://lore.kernel.org/lkml/a782d2f3-d2f6-795f-f4b1-9462205fd581@arm.com
Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/e9e68ce1441a73401e08b641cc3b9a3cf13fe6d4.1608243147.git.reinette.chatre@intel.com
Stable-dep-of: fe1f071438 ("x86/resctrl: Fix task CLOSID/RMID update race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45e966fcca ]
Passing the host topology to the guest is almost certainly wrong
and will confuse the scheduler. In addition, several fields of
these CPUID leaves vary on each processor; it is simply impossible to
return the right values from KVM_GET_SUPPORTED_CPUID in such a way that
they can be passed to KVM_SET_CPUID2.
The values that will most likely prevent confusion are all zeroes.
Userspace will have to override it anyway if it wishes to present a
specific topology to the guest.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cde363ab7c ]
Add a section to document all the different ways in which the KVM API sucks.
I am sure there are way more, give people a place to vent so that userspace
authors are aware.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220322110712.222449-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 142e821f68 ]
A clk, prepared and enabled in mtk_iommu_v1_hw_init(), is not released in
the error handling path of mtk_iommu_v1_probe().
Add the corresponding clk_disable_unprepare(), as already done in the
remove function.
Fixes: b17336c55d ("iommu/mediatek: add support for mtk iommu generation one HW")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/593e7b7d97c6e064b29716b091a9d4fd122241fb.1671473163.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 115d9d77bb ]
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages
Fixes: 3a80a7fa79 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d515d63cae ]
Previously, encap rules with gbp option would be offloaded by mistake but
driver does not support gbp option offload.
To fix this issue, check if the encap rule has gbp option and don't
offload the rule
Fixes: d8f9dfae49 ("net: sched: allow flower to match vxlan options")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe91d57277 ]
.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb
that can be set for a single call of .adjfine. This means that a single
call to .getfine cannot be greater than .max_adj or less than -(.max_adj).
Provides correct value for max frequency adjustment value supported by
devices.
Fixes: 3d8c38af14 ("net/mlx5e: Add PTP Hardware Clock (PHC) support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e17f99220 ]
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':
"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"
This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.
Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.
No regressions in MPLS tests:
# ./tdc.py -f tc-tests/actions/mpls.json
[...]
# echo $?
0
[1]
WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118
nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
Modules linked in:
CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
[...]
Call Trace:
<TASK>
__netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310
netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411
netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline]
netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506
netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2482
___sys_sendmsg net/socket.c:2536 [inline]
__sys_sendmsg+0x197/0x230 net/socket.c:2565
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/
Fixes: 2a2ea50870 ("net: sched: add mpls manipulation actions to TC")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Tested-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dab880d67 ]
Fix a use-after-free that occurs in hcd when in_urb sent from
pn533_usb_send_frame() is completed earlier than out_urb. Its callback
frees the skb data in pn533_send_async_complete() that is used as a
transfer buffer of out_urb. Wait before sending in_urb until the
callback of out_urb is called. To modify the callback of out_urb alone,
separate the complete function of out_urb and ack_urb.
Found by a modified version of syzkaller.
BUG: KASAN: use-after-free in dummy_timer
Call Trace:
memcpy (mm/kasan/shadow.c:65)
dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352)
transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972)
arch_static_branch (arch/x86/include/asm/jump_label.h:27)
static_key_false (include/linux/jump_label.h:207)
timer_expire_exit (include/trace/events/timer.h:127)
call_timer_fn (kernel/time/timer.c:1475)
expire_timers (kernel/time/timer.c:1519)
__run_timers (kernel/time/timer.c:1790)
run_timer_softirq (kernel/time/timer.c:1803)
Fixes: c46ee38620 ("NFC: pn533: add NXP pn533 nfc device driver")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0dccad87c ]
The currently lockless access to the xen console list in
vtermno_to_xencons() is incorrect, as additions and removals from the
list can happen anytime, and as such the traversal of the list to get
the private console data for a given termno needs to happen with the
lock held. Note users that modify the list already do so with the
lock taken.
Adjust current lock takers to use the _irq{save,restore} helpers,
since the context in which vtermno_to_xencons() is called can have
interrupts disabled. Use the _irq{save,restore} set of helpers to
switch the current callers to disable interrupts in the locked region.
I haven't checked if existing users could instead use the _irq
variant, as I think it's safer to use _irq{save,restore} upfront.
While there switch from using list_for_each_entry_safe to
list_for_each_entry: the current entry cursor won't be removed as
part of the code in the loop body, so using the _safe variant is
pointless.
Fixes: 02e19f9c7c ('hvc_xen: implement multiconsole support')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20221130163611.14686-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e9b8763e ]
PF netdev can request AF to enable or disable reception and transmission
on assigned CGX::LMAC. The current code instead of disabling or enabling
'reception and transmission' also disables/enable the LMAC. This patch
fixes this issue.
Fixes: 1435f66a28 ("octeontx2-af: CGX Rx/Tx enable/disable mbox handlers")
Signed-off-by: Angela Czubak <aczubak@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230105160107.17638-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5a73b632b ]
Firmware configures NIX block mapping for all CGXs
to achieve maximum throughput. This patch reads
the configuration and create mapping between RVU
PF and NIX blocks. And for LBK VFs assign NIX0 for
even numbered VFs and NIX1 for odd numbered VFs.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b4e9b8763e ("octeontx2-af: Fix LMAC config in cgx_lmac_rx_tx_enable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdd41e8785 ]
Since multiple blocks of same type are present in
98xx, modify functions which get resource count and
which update resource count to work with individual
block address instead of block type.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b4e9b8763e ("octeontx2-af: Fix LMAC config in cgx_lmac_rx_tx_enable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c244c092f1 ]
This unexpected behavior is observed:
node 1 | node 2
------ | ------
link is established | link is established
reboot | link is reset
up | send discovery message
receive discovery message |
link is established | link is established
send discovery message |
| receive discovery message
| link is reset (unexpected)
| send reset message
link is reset |
It is due to delayed re-discovery as described in function
tipc_node_check_dest(): "this link endpoint has already reset
and re-established contact with the peer, before receiving a
discovery message from that node."
However, commit 598411d70f has changed the condition for calling
tipc_node_link_down() which was the acceptance of new media address.
This commit fixes this by restoring the old and correct behavior.
Fixes: 598411d70f ("tipc: make resetting of links non-atomic")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 472a6309c6 ]
Restore volume after charge pump and PGA activation to ensure
that volume settings are correctly applied when re-enabling codec
from SND_SOC_BIAS_OFF state.
CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration
affect how the volume register are applied and must be configured first.
Fixes: a91eb199e4 ("ASoC: Initial WM8904 CODEC driver")
Link: https://lore.kernel.org/all/c7864c35-738c-a867-a6a6-ddf9f98df7e7@gmail.com/
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221223080247.7258-1-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02228f6aa6 ]
If the system does not come from reset (like when it is kexec()), the
regulator might have an IRQ waiting for us.
If we enable the IRQ handler before its structures are ready, we crash.
This patch fixes:
[ 1.141839] Unable to handle kernel read from unreadable memory at virtual address 0000000000000078
[ 1.316096] Call trace:
[ 1.316101] blocking_notifier_call_chain+0x20/0xa8
[ 1.322757] cpu cpu0: dummy supplies not allowed for exclusive requests
[ 1.327823] regulator_notifier_call_chain+0x1c/0x2c
[ 1.327825] da9211_irq_handler+0x68/0xf8
[ 1.327829] irq_thread+0x11c/0x234
[ 1.327833] kthread+0x13c/0x154
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20221124-da9211-v2-0-1779e3c5d491@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e840774379 upstream.
Fix period calculation in case user sets a value of 1000. The input of
round_jiffies_relative() should be in jiffies and not in milli-seconds.
[ bp: Use the same code pattern as in edac_device_workq_setup() for
clarity. ]
Fixes: c4cf3b454e ("EDAC: Rework workqueue handling")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221020124458.22153-1-farbere@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c6dd961d0 upstream.
With 'GNU assembler (GNU Binutils for Debian) 2.39.90.20221231' the
build now reports:
arch/x86/realmode/rm/../../boot/bioscall.S: Assembler messages:
arch/x86/realmode/rm/../../boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/realmode/rm/../../boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/boot/bioscall.S: Assembler messages:
arch/x86/boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant
Which is due to:
PR gas/29525
Note that with the dropped CMPSD and MOVSD Intel Syntax string insn
templates taking operands, mixed IsString/non-IsString template groups
(with memory operands) cannot occur anymore. With that
maybe_adjust_templates() becomes unnecessary (and is hence being
removed).
More details: https://sourceware.org/bugzilla/show_bug.cgi?id=29525
Borislav Petkov further explains:
" the particular problem here is is that the 'd' suffix is
"conflicting" in the sense that you can have SSE mnemonics like movsD %xmm...
and the same thing also for string ops (which is the case here) so apparently
the agreement in binutils land is to use the always accepted suffixes 'l' or 'q'
and phase out 'd' slowly... "
Fixes: 7a734e7dd9 ("x86, setup: "glove box" BIOS calls -- infrastructure")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/Y71I3Ex2pvIxMpsP@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
