[ Upstream commit faae443738 ]
Currently, acpi_device_remove_notify_handler() may return while the
notify handler being removed is still running which may allow the
module holding that handler to be torn down prematurely.
Address this issue by making acpi_device_remove_notify_handler() wait
for the handling of all the ACPI events in progress to complete before
returning.
Fixes: 5894b0c46e ("ACPI / scan: Move bus operations and notification routines to bus.c")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c56610a869 ]
For ACPI drivers that provide a ->notify() callback and set
ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be
invoked while either the ->add() or the ->remove() callback is running
without any synchronization at the bus type level which is counter to
the common-sense expectation that notification handling should only be
enabled when the driver is actually bound to the device. As a result,
if the driver is not careful enough, it's ->notify() callback may crash
when it is invoked too early or too late [1].
This issue has been amplified by commit d6fb6ee182 ("ACPI: bus: Drop
driver member of struct acpi_device") that made acpi_bus_notify() check
for the presence of the driver and its ->notify() callback directly
instead of using an extra driver pointer that was only set and cleared
by the bus type code, but it was present before that commit although
it was harder to reproduce then.
It can be addressed by using the observation that
acpi_device_install_notify_handler() can be modified to install the
handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is
set in the driver flags, in which case acpi_bus_notify() will not need
to invoke the driver's ->notify() callback any more and that callback
will only be invoked after acpi_device_install_notify_handler() has run
and before acpi_device_remove_notify_handler() runs, which implies the
correct ordering with respect to the other ACPI driver callbacks.
Modify the code accordingly and while at it, drop two redundant local
variables from acpi_bus_notify() and turn its description comment into
a proper kerneldoc one.
Fixes: d6fb6ee182 ("ACPI: bus: Drop driver member of struct acpi_device")
Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1]
Reported-by: Pierre Asselin <pa@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Pierre Asselin <pa@panix.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Merge miscellaneous ACPI material, ACPI tools changes and ACPI
documentation updates for 6.1-rc1:
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki).
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang).
- Do not initialize ret in main() in the pfrut utility (Shi junming).
- Drop useless ACPI DSDT override documentation (Rafael Wysocki).
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare).
* acpi-misc:
MAINTAINERS: Drop records pointing to 01.org/linux-acpi
ACPI: Kconfig: Drop link to https://01.org/linux-acpi
ACPI: DPTF: Drop stale link from Kconfig help
ACPI: move from strlcpy() with unused retval to strscpy()
* acpi-tools:
ACPI: tools: pfrut: Do not initialize ret in main()
* acpi-docs:
ACPI: docs: Drop useless DSDT override documentation
ACPI: docs: enumeration: Fix a few typos and wording mistakes
Merge changes related to ACPI device enumeration and ACPI support for
platform devices for 6.1-rc1:
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry).
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen).
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv).
* acpi-scan:
LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA
ACPI: scan: Support multiple DMA windows with different offsets
* acpi-bus:
ACPI: bus: Refactor ACPI matching functions for better readability
ACPI: bus: Drop kernel doc annotation from acpi_bus_notify()
ACPI: bus: Remove the unneeded result variable
* acpi-platform:
ACPI: platform: Use PLATFORM_DEVID_NONE in acpi_create_platform_device()
ACPI: platform: Sort forbidden_id_list[] in ascending order
ACPI: platform: Use sizeof(*pointer) instead of sizeof(type)
ACPI: platform: Remove redundant print on -ENOMEM
ACPI: platform: Get rid of redundant 'else'
With temporary variables for OF and ACPI IDs, it's easier to read
the code. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The description for acpi_bus_notify() is quite far from what
kernel doc expects. It complains about this:
Function parameter or member 'handle' not described in 'acpi_bus_notify'
Function parameter or member 'type' not described in 'acpi_bus_notify'
Function parameter or member 'data' not described in 'acpi_bus_notify'
Fix this by dropping kernel doc annotation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Return the value from driver_register() directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because acpi_bus_get_acpi_device() is completely analogous to
acpi_fetch_acpi_dev(), rename it to acpi_get_acpi_dev() and
add a kerneldoc comment to it.
Accordingly, rename acpi_bus_put_acpi_device() to acpi_put_acpi_dev()
and update all of the users of these two functions.
While at it, move the acpi_fetch_acpi_dev() header next to the
acpi_get_acpi_dev() header in the header file holding them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
- Use facilities provided by the driver core and some additional
helpers to handle the children of a given ACPI device object in
multiple places instead of using the children and node list heads in
struct acpi_device which is error prone (Rafael Wysocki).
- Fix ACPI-related device reference counting issue in the hisi_lpc bus
driver (Yang Yingliang).
- Drop the children and node list heads that are not needed any more
from struct acpi_device (Rafael Wysocki).
- Drop driver member from struct acpi_device (Uwe Kleine-König).
- Drop redundant check from acpi_device_remove() (Uwe Kleine-König).
- Prepare the CPPC library for handling backwards-compatible future
_CPC return package formats gracefully (Rafael Wysocki).
- Clean up the ACPI EC driver after previous changes in it (Hans
de Goede).
- Drop leftover acpi_processor_get_limit_info() declaration (Riwen
Lu).
- Split out thermal initialization from ACPI PSS (Riwen Lu).
- Annotate more functions in the ACPI CPU idle driver to live in the
cpuidle section (Guilherme G. Piccoli).
- Fix _EINJ vs "special purpose" EFI memory regions (Dan Williams).
- Implement a better fix to avoid spamming the console with old error
logs (Tony Luck).
- Fix typo in a comment in the APEI code (Xiang wangx).
- Save NVS memory during transitions into S3 on Lenovo G40-45 (Manyi
Li).
- Add support for upcoming AMD uPEP device ID AMDI008 to the ACPI
suspend-to-idle driver for x86 platforms (Shyam Sundar S K).
- Clean up checks related to the ACPI_FADT_LOW_POWER_S0 platform flag
in the LPIT table driver and the suspend-to-idle driver for x86
platforms (Rafael Wysocki).
- Print information messages regarding declared LPS0 idle support in
the platform firmware (Rafael Wysocki).
- Fix missing check in register_device_clock() in the ACPI driver for
Intel SoCs (huhai).
- Fix ACS setup in the VIOT table parser (Eric Auger).
- Skip IRQ override on AMD Zen platforms where it's harmful (Chuanhong
Guo).
- Use native backlight on Dell Inspiron N4010 (Hans de Goede).
- Use native backlight on some TongFang devices (Werner Sembach).
- Drop X86 dependency from the ACPI backlight driver Kconfig (Riwen
Lu).
- Shorten the quirk list in the ACPI backlight driver by identifying
Clevo by board_name only (Werner Sembach).
- Remove useless NULL pointer checks from 2 ACPI PCI link management
functions (Andrey Strachuk).
- Fix obsolete example in the ACPI EINJ documentation (Qifu Zhang).
- Update links and references to _DSD-related documents (Sudeep
Holla).
-----BEGIN PGP SIGNATURE-----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=2/wJ
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These rework the handling of ACPI device objects to use the driver
core facilities for managing child ones instead of some questionable
home-grown ways without the requisite locking and reference counting,
clean up the EC driver, improve suspend-to-idle handling on x86, add
some systems to the ACPI backlight quirk list, fix some assorted
issues, clean up code and improve documentation.
Specifics:
- Use facilities provided by the driver core and some additional
helpers to handle the children of a given ACPI device object in
multiple places instead of using the children and node list heads
in struct acpi_device which is error prone (Rafael Wysocki).
- Fix ACPI-related device reference counting issue in the hisi_lpc
bus driver (Yang Yingliang).
- Drop the children and node list heads that are not needed any more
from struct acpi_device (Rafael Wysocki).
- Drop driver member from struct acpi_device (Uwe Kleine-König).
- Drop redundant check from acpi_device_remove() (Uwe Kleine-König).
- Prepare the CPPC library for handling backwards-compatible future
_CPC return package formats gracefully (Rafael Wysocki).
- Clean up the ACPI EC driver after previous changes in it (Hans de
Goede).
- Drop leftover acpi_processor_get_limit_info() declaration (Riwen
Lu).
- Split out thermal initialization from ACPI PSS (Riwen Lu).
- Annotate more functions in the ACPI CPU idle driver to live in the
cpuidle section (Guilherme G. Piccoli).
- Fix _EINJ vs "special purpose" EFI memory regions (Dan Williams).
- Implement a better fix to avoid spamming the console with old error
logs (Tony Luck).
- Fix typo in a comment in the APEI code (Xiang wangx).
- Save NVS memory during transitions into S3 on Lenovo G40-45 (Manyi
Li).
- Add support for upcoming AMD uPEP device ID AMDI008 to the ACPI
suspend-to-idle driver for x86 platforms (Shyam Sundar S K).
- Clean up checks related to the ACPI_FADT_LOW_POWER_S0 platform flag
in the LPIT table driver and the suspend-to-idle driver for x86
platforms (Rafael Wysocki).
- Print information messages regarding declared LPS0 idle support in
the platform firmware (Rafael Wysocki).
- Fix missing check in register_device_clock() in the ACPI driver for
Intel SoCs (huhai).
- Fix ACS setup in the VIOT table parser (Eric Auger).
- Skip IRQ override on AMD Zen platforms where it's harmful
(Chuanhong Guo).
- Use native backlight on Dell Inspiron N4010 (Hans de Goede).
- Use native backlight on some TongFang devices (Werner Sembach).
- Drop X86 dependency from the ACPI backlight driver Kconfig (Riwen
Lu).
- Shorten the quirk list in the ACPI backlight driver by identifying
Clevo by board_name only (Werner Sembach).
- Remove useless NULL pointer checks from 2 ACPI PCI link management
functions (Andrey Strachuk).
- Fix obsolete example in the ACPI EINJ documentation (Qifu Zhang).
- Update links and references to _DSD-related documents (Sudeep
Holla)"
* tag 'acpi-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (46 commits)
ACPI/PCI: Remove useless NULL pointer checks
ACPI: CPPC: Do not prevent CPPC from working in the future
ACPI: PM: x86: Print messages regarding LPS0 idle support
ACPI: resource: skip IRQ override on AMD Zen platforms
Documentation: ACPI: EINJ: Fix obsolete example
ACPI: video: Use native backlight on Dell Inspiron N4010
ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset
Revert "ACPI / PM: LPIT: Register sysfs attributes based on FADT"
ACPI: video: Shortening quirk list by identifying Clevo by board_name only
ACPI: video: Force backlight native for some TongFang devices
ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008
ACPI: VIOT: Fix ACS setup
ACPI: bus: Drop unused list heads from struct acpi_device
hisi_lpc: Use acpi_dev_for_each_child()
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
ACPI: bus: Drop driver member of struct acpi_device
ACPI: bus: Drop redundant check in acpi_device_remove()
ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP
ACPI: LPSS: Fix missing check in register_device_clock()
ACPI: APEI: Better fix to avoid spamming the console with old error logs
...
core:
- Fix a few inconsistencies between UP and SMP vs. interrupt affinities
- Small updates and cleanups all over the place
drivers:
- New driver for the LoongArch interrupt controller
- New driver for the Renesas RZ/G2L interrupt controller
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmLn5agTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoV2HD/4u0+09Fd8Awt1Knnb4CInmwFihZ/bu
EiS1Air+MEJ/fyFb5sT/Dn8YdUWYA6a3ifpLMGBwrKCcb5pMwPEtI8uqjSmtgsN/
2Z4o3N5v6EgM25CtrHNBrXK0E9Rz5Py49gm5p3K7+h4g63z9JwrM4G0Bvr8+krLS
EV9IZU6kVmGC6gnG/MspkArsLk1rCM0PU0SJ2lEPsWd1fjhVSDfunvy/qnnzXRzz
wjrcAf+a2Kgb1TMnpL6tx9d2Xx8KrKfODZTdOmPHrdv58F0EbJzapJnAVkYZDPtR
LE2kQc2Qhdawx0kgNNNhvu9P6oZtpnK9N7KAhDQdw17sgrRygINjAMSEe2RykYL1
lK+lJOIzfyd2JkEuC/8w1ZezL88S0EaTNawrkxjJ8L3fa7WDbwilCC+1w95QydCv
sQB137OaLKgWetcRsht9PLWFb4ujkWzxoPf2cPPsm81EzCicNtBuNPLReBTcNrWJ
X2VPpbaqRK8t8bnkXRqhahbq7f8c86feoICHfA4c7T4eZUp/Oq6T8aNvf6WPgjae
I2/FO6kxZj3CQqFkhJGhiZRtGZdx6HLCsL84A+2Ktsra+D8+/qecZCnkHYtz0Vo6
aFuGg+Wj+zuc2QfdaWwG8Dh5dijbxgHGHhzbh9znsWzytN9gfoBxuvBejf65i6sC
In63mEkv35ttfA==
=OnhF
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
Merge ACPI power management changes, ACPI LPSS driver changes, ACPI
table parsing code changes and ACPI resource handling changes for
v5.20-rc1:
- Save NVS memory during transitions into S3 on Lenovo G40-45 (Manyi
Li).
- Add support for upcoming AMD uPEP device ID AMDI008 to the ACPI
suspend-to-idle driver for x86 platforms (Shyam Sundar S K).
- Clean up checks related to the ACPI_FADT_LOW_POWER_S0 platform flag
in the LPIT table driver and the suspend-to-idle driver for x86
platforms (Rafael Wysocki).
- Print information messages regarding declared LPS0 idle support in
the platform firmware (Rafael Wysocki).
- Fix missing check in register_device_clock() in the ACPI driver for
Intel SoCs (huhai).
- Fix ACS setup in the VIOT table parser (Eric Auger).
- Skip IRQ override on AMD Zen platforms where it's harmful (Chuanhong
Guo).
* acpi-pm:
ACPI: PM: x86: Print messages regarding LPS0 idle support
ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset
Revert "ACPI / PM: LPIT: Register sysfs attributes based on FADT"
ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008
ACPI: PM: save NVS memory for Lenovo G40-45
* acpi-soc:
ACPI: LPSS: Fix missing check in register_device_clock()
* acpi-tables:
ACPI: VIOT: Fix ACS setup
* acpi-resource:
ACPI: resource: skip IRQ override on AMD Zen platforms
Merge ACPI device object management changes for v5.20-rc1.
- Use the facilities provided by the driver core and some additional
helpers to handle the children of a given ACPI device object in
multiple places instead of using the children and node list heads in
struct acpi_device which is error prone (Rafael Wysocki).
- Fix ACPI-related device reference counting issue in the hisi_lpc bus
driver (Yang Yingliang).
- Drop the children and node list heads that are not needed any more
from struct acpi_device (Rafael Wysocki).
- Drop driver member from struct acpi_device (Uwe Kleine-König).
- Drop redundant check from acpi_device_remove() (Uwe Kleine-König).
* acpi-bus:
ACPI: bus: Drop unused list heads from struct acpi_device
hisi_lpc: Use acpi_dev_for_each_child()
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
ACPI: bus: Drop driver member of struct acpi_device
ACPI: bus: Drop redundant check in acpi_device_remove()
mfd: core: Use acpi_dev_for_each_child()
ACPI / MMC: PM: Unify fixing up device power
soundwire: Use acpi_dev_for_each_child()
platform/x86/thinkpad_acpi: Use acpi_dev_for_each_child()
ACPI: scan: Walk ACPI device's children using driver core
ACPI: bus: Introduce acpi_dev_for_each_child_reverse()
ACPI: video: Use acpi_dev_for_each_child()
ACPI: bus: Export acpi_dev_for_each_child() to modules
ACPI: property: Use acpi_dev_for_each_child() for child lookup
ACPI: container: Use acpi_dev_for_each_child()
USB: ACPI: Replace usb_acpi_find_port() with acpi_find_child_by_adr()
thunderbolt: ACPI: Replace tb_acpi_find_port() with acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_dev_has_children()
ACPI: glue: Use acpi_dev_for_each_child()
For LoongArch, ACPI_IRQ_MODEL_LPIC is introduced, and then the
callback acpi_get_gsi_domain_id and acpi_gsi_to_irq_fallback are
implemented.
The acpi_get_gsi_domain_id callback returns related fwnode handle
of irqdomain for different GSI range.
The acpi_gsi_to_irq_fallback will create new mapping for gsi when
the mapping of it is not found.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-14-git-send-email-lvjianmin@loongson.cn
Previously the kernel used to ignore whether the firmware masked CPPC
or CPPCv2 and would just pretend that it worked.
When support for the USB4 bit in _OSC was introduced from commit
9e1f561afb ("ACPI: Execute platform _OSC also with query bit clear")
the kernel began to look at the return when the query bit was clear.
This caused regressions that were misdiagnosed and attempted to be solved
as part of commit 2ca8e62852 ("Revert "ACPI: Pass the same capabilities
to the _OSC regardless of the query flag""). This caused a different
regression where non-Intel systems weren't able to negotiate _OSC
properly.
This was reverted in commit 2ca8e62852 ("Revert "ACPI: Pass the same
capabilities to the _OSC regardless of the query flag"") and attempted to
be fixed by commit c42fa24b44 ("ACPI: bus: Avoid using CPPC if not
supported by firmware") but the regression still returned.
These systems with the regression only load support for CPPC from an SSDT
dynamically when _OSC reports CPPC v2. Avoid the problem by not letting
CPPC satisfy the requirement in `acpi_cppc_processor_probe`.
Reported-by: CUI Hao <cuihao.leo@gmail.com>
Reported-by: maxim.novozhilov@gmail.com
Reported-by: lethe.tree@protonmail.com
Reported-by: garystephenwright@gmail.com
Reported-by: galaxyking0419@gmail.com
Fixes: c42fa24b44 ("ACPI: bus: Avoid using CPPC if not supported by firmware")
Fixes: 2ca8e62852 ("Revert "ACPI Pass the same capabilities to the _OSC regardless of the query flag"")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213023
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2075387
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: CUI Hao <cuihao.leo@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently acpi_viot_init() gets called after the pci
device has been scanned and pci_enable_acs() has been called.
So pci_request_acs() fails to be taken into account leading
to wrong single iommu group topologies when dealing with
multi-function root ports for instance.
We cannot simply move the acpi_viot_init() earlier, similarly
as the IORT init because the VIOT parsing relies on the pci
scan. However we can detect VIOT is present earlier and in
such a case, request ACS. Introduce a new acpi_viot_early_init()
routine that allows to call pci_request_acs() before the scan.
While at it, guard the call to pci_request_acs() with #ifdef
CONFIG_PCI.
Fixes: 3cf485540e ("ACPI: Add driver for the VIOT table")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Jin Liu <jinl@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
struct acpi_device::driver tracks the same information as the driver
member of struct acpi_device::dev.
Fix all users of the former to use the latter and drop the redundant
data from struct acpi_device.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A bus remove callback is only ever called by the device core with a
bound driver. So there is no need to check if the driver is non-NULL.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[ rjw: Added empty code line after if () ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make it possible to walk the children of an ACPI device in the revese
order by defining acpi_dev_for_each_child_reverse() in analogy with
acpi_dev_for_each_child().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some pieces of modular code can benefit from using
acpi_dev_for_each_child(), so export it to modules.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously hidden
behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL DVSEC
/ 'mem_enable') before enabling new CXL 2.0 decode configurations (CXL
HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFUogAKCRDfioYZHlFs
Zz+VAP9o/NkYhbaM2Ne9ImgsdJii96gA8nN7q/q/ZoXjsSx2WQD+NRC5d3ZwZDCa
9YKEkntnvbnAZOCs+ZUuyZBgNh6vsgU=
=p92w
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for this cycle.
The highlight is new driver-core infrastructure and CXL subsystem
changes for allowing lockdep to validate device_lock() usage. Thanks
to PeterZ for setting me straight on the current capabilities of the
lockdep API, and Greg acked it as well.
On the CXL ACPI side this update adds support for CXL _OSC so that
platform firmware knows that it is safe to still grant Linux native
control of PCIe hotplug and error handling in the presence of CXL
devices. A circular dependency problem was discovered between suspend
and CXL memory for cases where the suspend image might be stored in
CXL memory where that image also contains the PCI register state to
restore to re-enable the device. Disable suspend for now until an
architecture is defined to clarify that conflict.
Lastly a collection of reworks, fixes, and cleanups to the CXL
subsystem where support for snooping mailbox commands and properly
handling the "mem_enable" flow are the highlights.
Summary:
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously
hidden behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag
set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL
DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
configurations (CXL HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure"
* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
cxl/port: Enable HDM Capability after validating DVSEC Ranges
cxl/port: Reuse 'struct cxl_hdm' context for hdm init
cxl/port: Move endpoint HDM Decoder Capability init to port driver
cxl/pci: Drop @info argument to cxl_hdm_decode_init()
cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
cxl/mem: Skip range enumeration if mem_enable clear
cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
cxl/pci: Move cxl_await_media_ready() to the core
cxl/mem: Validate port connectivity before dvsec ranges
cxl/mem: Fix cxl_mem_probe() error exit
cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
cxl/mem: Drop mem_enabled check from wait_for_media()
nvdimm: Fix firmware activation deadlock scenarios
device-core: Kill the lockdep_mutex
nvdimm: Drop nd_device_lock()
ACPI: NFIT: Drop nfit_device_lock()
nvdimm: Replace lockdep_mutex with local lock classes
cxl: Drop cxl_device_lock()
cxl/acpi: Add root device lockdep validation
...
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
The _OSC method allows the OS and firmware to communicate about
supported features/capabitlities. It also allows the OS to take
control of some features.
In ACPI 6.4, s6.2.11.2 Platform-Wide OSPM Capabilities, the CPPC
(resp. v2) bit should be set by the OS if it 'supports controlling
processor performance via the interfaces described in the _CPC
object'.
The OS supports CPPC and parses the _CPC object only if
CONFIG_ACPI_CPPC_LIB is set. Replace the x86 specific
boot_cpu_has(X86_FEATURE_HWP) dynamic check with an arch
generic CONFIG_ACPI_CPPC_LIB build-time check.
Note:
CONFIG_X86_INTEL_PSTATE selects CONFIG_ACPI_CPPC_LIB.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.2 Section 6.2.11.2 'Platform-Wide OSPM Capabilities':
Starting with ACPI Specification 6.2, all _CPC registers can be in
PCC, System Memory, System IO, or Functional Fixed Hardware address
spaces. OSPM support for this more flexible register space scheme is
indicated by the “Flexible Address Space for CPPC Registers” _OSC bit
Otherwise (cf ACPI 6.1, s8.4.7.1.1.X), _CPC registers must be in:
- PCC or Functional Fixed Hardware address space if defined
- SystemMemory address space (NULL register) if not defined
Add the corresponding _OSC bit and check it when parsing _CPC objects.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
During _OSC negotiation, when the 'Control' DWORD is needed from the
result buffer after running _OSC, a couple of places performed manual
pointer arithmetic to offset into the right spot in the raw buffer.
Add a acpi_osc_ctx_get_pci_control() helper to use the #define'd
DWORD offsets to fetch the DWORDs needed from @acpi_osc_context, and
replace the above instances of the open-coded arithmetic.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Suggested-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20220413073618.291335-2-vishal.l.verma@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When walking the children of an ACPI device, take extra care to avoid
using to_acpi_device() on the ones that are not ACPI devices, because
that may lead to out-of-bounds access and memory corruption.
While at it, make the function passed to acpi_dev_for_each_child()
take a struct acpi_device pointer argument (instead of a struct device
one), so it is more straightforward to use.
Fixes: b7dd6298db ("ACPI: PM: Introduce acpi_dev_power_up_children_with_adr()")
Reported-by: kernel test robot <oliver.sang@intel.com>
BugLink: https://lore.kernel.org/lkml/20220420064725.GB16310@xsang-OptiPlex-9020/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Introduce a wrapper around device_for_each_child() to iterate over
the children of a given ACPI device object.
This function will be used in subsequent change sets.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Merge ACPI SoC drivers changes, ACPI backlight driver changes and APEI
changes for 5.18-rc1:
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
* acpi-soc:
ACPI: LPSS: Provide an SSP type to the driver
ACPI: LPSS: Constify properties member in struct lpss_device_desc
ACPI: platform: Constify properties parameter in acpi_create_platform_device()
* acpi-video:
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
* acpi-apei:
ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
ACPI/APEI: Limit printable size of BERT table data
ACPI: APEI: fix return value of __setup handlers
ACPI: APEI: rename ghes_init() with an "acpi_" prefix
ACPI: APEI: explicit init of HEST and GHES in apci_init()
If the platform firmware indicates that it does not support CPPC by
clearing the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits in the
platform _OSC capabilities mask, avoid attempting to evaluate _CPC
which may fail in that case.
Because the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits are only
added to the supported platform capabilities mask on x86, when
X86_FEATURE_HWP is supported, allow _CPC to be evaluated regardless
in the other cases.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0i=ecAksq0TV+iLVObm-=fUfdqPABzzkgm9K6KxO1ZCcg@mail.gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Revert commit 159d8c274f ("ACPI: Pass the same capabilities to the
_OSC regardless of the query flag") which caused legitimate usage
scenarios (when the platform firmware does not want the OS to control
certain platform features controlled by the system bus scope _OSC) to
break and was misguided by some misleading language in the _OSC
definition in the ACPI specification (in particular, Section 6.2.11.1.3
"Sequence of _OSC Calls" that contradicts other perts of the _OSC
definition).
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iStA0JmO0H3z+VgQsVuQONVjKPpw0F5HKfiq=Gb6B5yw@mail.gmail.com
Reported-by: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices
Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to
issue diagnostic dump and reset via an SDEI event or an interrupt.
This patch implements SDEI path.
[0] https://developer.arm.com/documentation/den0093/latest/
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes_init() sticks out in acpi_init() because it is the only functions
without an "acpi_" prefix.
Rename ghes_init with an "acpi_" prefix, then all looks fine.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
From commit e147133a42 ("ACPI / APEI: Make hest.c manage the estatus
memory pool") was merged, ghes_init() relies on acpi_hest_init() to manage
the estatus memory pool. On the other hand, ghes_init() relies on
sdei_init() to detect the SDEI version and (un)register events. The
dependencies are as follows:
ghes_init() => acpi_hest_init() => acpi_bus_init() => acpi_init()
ghes_init() => sdei_init()
HEST is not PCI-specific and initcall ordering is implicit and not
well-defined within a level.
Based on above, remove acpi_hest_init() from acpi_pci_root_init() and
convert ghes_init() and sdei_init() from initcalls to explicit calls in the
following order:
acpi_hest_init()
ghes_init()
sdei_init()
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to avoid exposing acpi_bus_type to modules, introduce an
acpi_bus_for_each_dev() helper for iterating over all ACPI device
objects and make typec_link_ports() use it instead of the raw
bus_for_each_dev() along with acpi_bus_type.
Having done that, drop the acpi_bus_type export.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Here is the big set of USB and Thunderbolt driver changes for 5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were
acked by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for
5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd66Tg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynH2wCfetT95966ZMICGDmdwZpEBBYCO1wAn2v9Pwd2
CeXrMLdaOr9WkV2P6mE5
=K4Jh
-----END PGP SIGNATURE-----
Merge tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were acked
by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for 5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits)
docs: ABI: fixed formatting in configfs-usb-gadget-uac2
usb: gadget: u_audio: Subdevice 0 for capture ctls
usb: gadget: u_audio: fix calculations for small bInterval
usb: dwc2: gadget: initialize max_speed from params
usb: dwc2: do not gate off the hardware if it does not support clock gating
usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
USB: common: debug: add needed kernel.h include
headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c
headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h
headers/prep: usb: gadget: Fix namespace collision
USB: core: Fix bug in resuming hub's handling of wakeup requests
USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core
usb: gadget: clear related members when goto fail
usb: gadget: don't release an existing dev->buf
usb: dwc2: Simplify a bitmap declaration
usb: Remove usb_for_each_port()
usb: typec: port-mapper: Convert to the component framework
usb: Link the ports to the connectors they are attached to
...
Merge x86-specific ACPI updates, PMIC driver ACPI updates and a DPTF
driver update for 5.17-rc1:
- Rework the handling of device enumeration quirks in the x86-specific
code and add new quirks for known-broken platforms (Hans de Goede).
- Fix the handling of defective LPAT in the ACPI xpower PMIC driver
and clean up some definitions of PMIC data structures (Hans de
Goede).
- Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).
* acpi-x86:
ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs
ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper
mmc: sdhci-acpi: Use the new soc_intel_is_byt() helper
mmc: sdhci-acpi: Remove special handling for GPD win/pocket devices
ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list
ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win
ACPI / x86: Allow specifying acpi_device_override_status() quirks by path
ACPI: Change acpi_device_always_present() into acpi_device_override_status()
ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table
* acpi-pmic:
ACPI: PMIC: xpower: Fix _TMP ACPI errors
ACPI: PMIC: allow drivers to provide a custom lpat_raw_to_temp() function
ACPI: PMIC: constify all struct intel_pmic_opregion_data declarations
* acpi-dptf:
ACPI: DPTF: Update device ID in a comment
PCC OpRegion provides a mechanism to communicate with the platform
directly from the AML. PCCT provides the list of PCC channel available
in the platform, a subset or all of them can be used in PCC Opregion.
This patch registers the PCC OpRegion handler before ACPI tables are
loaded. This relies on the special context data passed to identify and
set up the PCC channel before the OpRegion handler is executed for the
first time.
Typical PCC Opregion declaration looks like this:
OperationRegion (PFRM, PCC, 2, 0x74)
Field (PFRM, ByteAcc, NoLock, Preserve)
{
SIGN, 32,
FLGS, 32,
LEN, 32,
CMD, 32,
DATA, 800
}
It contains four named double words followed by 100 bytes of buffer
names DATA.
ASL can fill out the buffer something like:
/* Create global or local buffer */
Name (BUFF, Buffer (0x0C){})
/* Create double word fields over the buffer */
CreateDWordField (BUFF, 0x0, WD0)
CreateDWordField (BUFF, 0x04, WD1)
CreateDWordField (BUFF, 0x08, WD2)
/* Fill the named fields */
WD0 = 0x50434300
SIGN = BUFF
WD0 = 1
FLGS = BUFF
WD0 = 0x10
LEN = BUFF
/* Fill the payload in the DATA buffer */
WD0 = 0
WD1 = 0x08
WD2 = 0
DATA = BUFF
/* Write to CMD field to trigger handler */
WD0 = 0x4404
CMD = BUFF
This buffer is received by acpi_pcc_opregion_space_handler. This
handler will fetch the complete buffer via internal_pcc_buffer.
The setup handler will receive the special PCC context data which will
contain the PCC channel index which used to set up the channel. The
buffer pointer and length is saved in region context which is then used
in the handler.
(kernel test robot: Build failure with CONFIG_ACPI_DEBUGGER)
Link: https://lore.kernel.org/r/202201041539.feAV0l27-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
So we can use bus_for_each_dev() and others from modules.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223081620.45479-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.
In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.
Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a name collision between acpi_device_notify() defined in
bus.c and another static function defined in glue.c.
Since the latter is going to be exported from that file, rename the
former to acpi_notify_device() and rename acpi_device_notify_fixed()
to follow the same naming pattern.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- Fix up the recently added Platform Runtime Mechanism (PRM)
support by correnting a couple of implementation mistakes in it
and adding a Kconfig help text to describe it (Aubrey Li,
Rafael Wysocki).
- Add backlight quirk for Dell Vostro 3350 (Hans de Goede).
- Avoid spurious wakeups from suspend-to-idle on non-Intel platforms
by restricting special EC GPE handling to the Intel ones (Mario
Limonciello).
- Modify the AMBA bus support in ACPI to avoid adding using
resource names in /proc/iomem (Liguang Zhang).
-----BEGIN PGP SIGNATURE-----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=PXKo
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These include fixes of the recently introduced support for the
Platform Runtime Mechanism (PRM) feature, a new backlight quirk, a
suspend-to-idle wakeup fix for non-Intel platforms and a fix for the
AMBA bus resource list in /proc/iomem.
Specifics:
- Fix up the recently added Platform Runtime Mechanism (PRM) support
by correnting a couple of implementation mistakes in it and adding
a Kconfig help text to describe it (Aubrey Li, Rafael Wysocki).
- Add backlight quirk for Dell Vostro 3350 (Hans de Goede).
- Avoid spurious wakeups from suspend-to-idle on non-Intel platforms
by restricting special EC GPE handling to the Intel ones (Mario
Limonciello).
- Modify the AMBA bus support in ACPI to avoid adding using resource
names in /proc/iomem (Liguang Zhang)"
* tag 'acpi-5.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Do not singal PRM support if not enabled
ACPI: Correct \_SB._OSC bit definition for PRM
ACPI: Kconfig: Provide help text for the ACPI_PRMT option
ACPI: PM: Only mark EC GPE for wakeup on Intel systems
ACPI: video: Add quirk for the Dell Vostro 3350
ACPI: AMBA: Fix resource name in /proc/iomem
* acpi-misc:
ACPI: AMBA: Fix resource name in /proc/iomem
* acpi-video:
ACPI: video: Add quirk for the Dell Vostro 3350
* acpi-prm:
ACPI: Do not singal PRM support if not enabled
ACPI: Correct \_SB._OSC bit definition for PRM
ACPI: Kconfig: Provide help text for the ACPI_PRMT option
Including:
- SMMU Updates from Will Deacon:
- SMMUv3: Support stalling faults for platform devices
- SMMUv3: Decrease defaults sizes for the event and PRI queues
- SMMUv2: Support for a new '->probe_finalize' hook, needed by Nvidia
- SMMUv2: Even more Qualcomm compatible strings
- SMMUv2: Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU:
available on x86
- Add the amd_iommu=force_enable command line option to
enable the IOMMU on platforms where they are known to cause
problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
-----BEGIN PGP SIGNATURE-----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=IxNB
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- SMMU Updates from Will Deacon:
- SMMUv3:
- Support stalling faults for platform devices
- Decrease defaults sizes for the event and PRI queues
- SMMUv2:
- Support for a new '->probe_finalize' hook, needed by Nvidia
- Even more Qualcomm compatible strings
- Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU
available on x86
- Add the amd_iommu=force_enable command line option to enable
the IOMMU on platforms where they are known to cause problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
* tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu/virtio: Enable x86 support
iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
ACPI: Add driver for the VIOT table
ACPI: Move IOMMU setup code out of IORT
ACPI: arm64: Move DMA setup operations out of IORT
iommu/vt-d: Fix dereference of pointer info before it is null checked
iommu: Update "iommu.strict" documentation
iommu/arm-smmu: Check smmu->impl pointer before dereferencing
iommu/arm-smmu-v3: Remove unnecessary oom message
iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
iommu/vt-d: Fix linker error on 32-bit
iommu/vt-d: No need to typecast
iommu/vt-d: Define counter explicitly as unsigned int
iommu/vt-d: Remove unnecessary braces
iommu/vt-d: Removed unused iommu_count in dmar domain
iommu/vt-d: Use bitfields for DMAR capabilities
iommu/vt-d: Use DEVICE_ATTR_RO macro
iommu/vt-d: Fix out-bounds-warning in intel/svm.c
iommu/vt-d: Add PRQ handling latency sampling
...
If the OS confirms PRM (Platform Runtime Mechanism) support through
the \_SB._OSC PRM bit, the BIOS may start relying on the presence of
PRM support in the OS, so prevent the PRM bit from being set in the
\_SB._OSC capabilities bitmask when PRM support is not built in so
as to avoid confusing the BIOS in that case.
Fixes: 60faa8f1ac ("ACPI: Add \_SB._OSC bit for PRM")
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
[ rjw: Rewrite subject and changelog, replace #ifdef with if (IS_ENABLED()) ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-ec:
ACPI: EC: trust DSDT GPE for certain HP laptop
ACPI: EC: Make more Asus laptops use ECDT _GPE
* acpi-apei:
ACPI: APEI: fix synchronous external aborts in user-mode
ACPI: APEI: Don't warn if ACPI is disabled
* acpi-soc:
ACPI: LPSS: Use kstrtol() instead of simple_strtol()
* acpi-misc:
ACPI: NVS: fix doc warnings in nvs.c
ACPI: NUMA: fix typo in a comment
ACPI: OSL: Use DEFINE_RES_IO_NAMED() to simplify code
ACPI: bus: Call kobject_put() in acpi_init() error path
ACPI: bus: Remove unneeded assignment
ACPI: configfs: Replace ACPI_INFO() with pr_debug()
ACPI: ipmi: Remove address space handler in error path
ACPI: event: Remove redundant initialization of local variable
ACPI: sbshc: Fix fall-through warning for Clang
* acpi-prm:
ACPI: PRM: make symbol 'prm_module_list' static
ACPI: Add \_SB._OSC bit for PRM
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype
* acpi-sysfs:
ACPI: sysfs: Remove tailing return statement in void function
ACPI: sysfs: Use __ATTR_RO() and __ATTR_RW() macros
ACPI: sysfs: Sort headers alphabetically
ACPI: sysfs: Refactor param_get_trace_state() to drop dead code
ACPI: sysfs: Unify pattern of memory allocations
ACPI: sysfs: Allow bitmap list to be supplied to acpi_mask_gpe
ACPI: sysfs: Make sparse happy about address space in use
ACPI: sysfs: fix doc warnings in device_sysfs.c
ACPI: sysfs: Drop four redundant return statements
ACPI: sysfs: Fix a buffer overrun problem with description_show()
* acpi-x86:
x86/acpi: Switch to pr_xxx log functions
Rafael J. Wysocki