The ACPI Virtual I/O Translation Table describes topology of
para-virtual platforms, similarly to vendor tables DMAR, IVRS and IORT.
For now it describes the relation between virtio-iommu and the endpoints
it manages.
Three steps are needed to configure DMA of endpoints:
(1) acpi_viot_init(): parse the VIOT table, find or create the fwnode
associated to each vIOMMU device. This needs to happen after
acpi_scan_init(), because it relies on the struct device and their
fwnode to be available.
(2) When probing the vIOMMU device, the driver registers its IOMMU ops
within the IOMMU subsystem. This step doesn't require any
intervention from the VIOT driver.
(3) viot_iommu_configure(): before binding the endpoint to a driver,
find the associated IOMMU ops. Register them, along with the
endpoint ID, into the device's iommu_fwspec.
If step (3) happens before step (2), it is deferred until the IOMMU is
initialized, then retried.
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210618152059.1194210-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Notice that the table field of struct acpi_table_events_work is never
read and its event field is always equal to ACPI_TABLE_EVENT_LOAD, so
both of them are redundant.
Accordingly, drop struct acpi_table_events_work and use struct
work_struct directly instead of it, simplify acpi_scan_table_handler()
and rename it to acpi_scan_table_notify().
Moreover, make acpi_bus_table_handler() check the event code against
ACPI_TABLE_EVENT_LOAD before calling acpi_scan_table_notify(), so it
is not necessary to do that check in the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
context->ret.pointer already gets set to NULL at the beginning of
acpi_run_osc() and it only gets assigned a new value in the success
path near the end of acpi_run_osc(), so the clearing of
context->ret.pointer (when status != AE_OK) at the end of
acpi_run_osc() is redundant since it will always already be NULL when
status != AE_OK.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Platform Runtime Mechanism (PRM) is a firmware interface that exposes
a set of binary executables that can either be called from the AML
interpreter or device drivers by bypassing the AML interpreter.
This change implements the AML interpreter path.
According to the specification [1], PRM services are listed in an
ACPI table called the PRMT. This patch parses module and handler
information listed in the PRMT and registers the PlatformRtMechanism
OpRegion handler before ACPI tables are loaded.
Each service is defined by a 16-byte GUID and called from writing a
26-byte ASL buffer containing the identifier to a FieldUnit object
defined inside a PlatformRtMechanism OperationRegion.
OperationRegion (PRMR, PlatformRtMechanism, 0, 26)
Field (PRMR, BufferAcc, NoLock, Preserve)
{
PRMF, 208 // Write to this field to invoke the OperationRegion Handler
}
The 26-byte ASL buffer is defined as the following:
Byte Offset Byte Length Description
=============================================================
0 1 PRM OperationRegion handler status
1 8 PRM service status
9 1 PRM command
10 16 PRM handler GUID
The ASL caller fills out a 26-byte buffer containing the PRM command
and the PRM handler GUID like so:
/* Local0 is the PRM data buffer */
Local0 = buffer (26){}
/* Create byte fields over the buffer */
CreateByteField (Local0, 0x9, CMD)
CreateField (Local0, 0x50, 0x80, GUID)
/* Fill in the command and data fields of the data buffer */
CMD = 0 // run command
GUID = ToUUID("xxxx-xx-xxx-xxxx")
/*
* Invoke PRM service with an ID that matches GUID and save the
* result.
*/
Local0 = (\_SB.PRMT.PRMF = Local0)
Byte offset 0 - 8 are written by the handler as a status passed back to AML
and used by ASL like so:
/* Create byte fields over the buffer */
CreateByteField (Local0, 0x0, PSTA)
CreateQWordField (Local0, 0x1, USTA)
In this ASL code, PSTA contains a status from the OperationRegion and
USTA contains a status from the PRM service.
The 26-byte buffer is recieved by acpi_platformrt_space_handler. This
handler will look at the command value and the handler guid and take
the approperiate actions.
Command value Action
=====================================================================
0 Run the PRM service indicated by the PRM handler
GUID (bytes 10-26)
1 Prevent PRM runtime updates from happening to the
service's parent module
2 Allow PRM updates from happening to the service's parent module
This patch enables command value 0.
Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1]
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 719e1f561a ("ACPI: Execute platform _OSC also with query bit
clear") makes acpi_bus_osc_negotiate_platform_control() not only query
the platforms capabilities but it also commits the result back to the
firmware to report which capabilities are supported by the OS back to
the firmware
On certain systems the BIOS loads SSDT tables dynamically based on the
capabilities the OS claims to support. However, on these systems the
_OSC actually clears some of the bits (under certain conditions) so what
happens is that now when we call the _OSC twice the second time we pass
the cleared values and that results errors like below to appear on the
system log:
ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210105/psargs-330)
ACPI Error: Aborting method \_PR.PR01._CPC due to previous error (AE_NOT_FOUND) (20210105/psparse-529)
In addition the ACPI 6.4 spec says following [1]:
If the OS declares support of a feature in the Support Field in one
call to _OSC, then it must preserve the set state of that bit
(declaring support for that feature) in all subsequent calls.
Based on the above we can fix the issue by passing the same set of
capabilities to the platform wide _OSC in both calls regardless of the
query flag.
While there drop the context.ret.length checks which were wrong to begin
with (as the length is number of bytes not elements). This is already
checked in acpi_run_osc() that also returns an error in that case.
Includes fixes by Hans de Goede.
[1] https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#sequence-of-osc-calls
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213023
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1963717
Fixes: 719e1f561a ("ACPI: Execute platform _OSC also with query bit clear")
Cc: 5.12+ <stable@vger.kernel.org> # 5.12+
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Although the system will not be in a good condition or it will not
boot if acpi_bus_init() fails, it is still necessary to put the
kobject in the error path before returning to avoid leaking memory.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When acpi_kobj is NULL already, assigning NULL to it is redundant,
so don't do that.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In commit ee98460b2f ("ACPI: bus: Clean up printing messages"),
direct printk() invocations was replaced with the matching pr_*()
calls, but the left two printk() calls was merged at the same time
with the above cleaup commit, so we missed them for cleanup, let's
replace them now and we can remove the use of PREFIX later.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update ACPICA code in the kernel to upstream revision 20201113
with changes as follows:
* Remove the MTMR (Mid-Timer) table (Al Stone).
* Remove the VRTC table (Al Stone).
* Add type casts for string functions (Bob Moore).
* Update all copyrights to 2021 (Bob Moore).
* Fix exception code class checks (Maximilian Luz).
* Clean up exception code class checks (Maximilian Luz).
* Fix -Wfallthrough (Nick Desaulniers).
- Add support for setting and reading global profile of the platform
along with documentation (Mark Pearson, Hans de Goede, Jiaxun Yang).
- Fix fwnode properties matching and clean up the code handling
device properties and its documentation (Rafael Wysocki, Andy
Shevchenko).
- Clean up ACPI-based device enumeration code (Rafael Wysocki).
- Clean up the CPPC support library code (Ionela Voinescu).
- Clean up the APEI support code (Yang Li, Yazen Ghannam).
- Update GPIO-related properties documentation (Flavio Suligoi).
- Consolidate and clean up the printing of messages in several
places (Rafael Wysocki).
- Fix error code path in configfs handling code (Qinglang Miao).
- Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray).
- Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in
multiple places (Bjorn Helgaas).
-----BEGIN PGP SIGNATURE-----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=WpL7
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20210105, fix and clean up the handling of device properties, add
support for setting global profile of the platform, clean up device
enumeration, the CPPC library, the APEI support and more, update the
documentation, consolidate the printing of messages in several places
and make assorted janitorial changes.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20201113 with
changes as follows:
* Remove the MTMR (Mid-Timer) table (Al Stone).
* Remove the VRTC table (Al Stone).
* Add type casts for string functions (Bob Moore).
* Update all copyrights to 2021 (Bob Moore).
* Fix exception code class checks (Maximilian Luz).
* Clean up exception code class checks (Maximilian Luz).
* Fix -Wfallthrough (Nick Desaulniers).
- Add support for setting and reading global profile of the platform
along with documentation (Mark Pearson, Hans de Goede, Jiaxun
Yang).
- Fix fwnode properties matching and clean up the code handling
device properties and its documentation (Rafael Wysocki, Andy
Shevchenko).
- Clean up ACPI-based device enumeration code (Rafael Wysocki).
- Clean up the CPPC support library code (Ionela Voinescu).
- Clean up the APEI support code (Yang Li, Yazen Ghannam).
- Update GPIO-related properties documentation (Flavio Suligoi).
- Consolidate and clean up the printing of messages in several places
(Rafael Wysocki).
- Fix error code path in configfs handling code (Qinglang Miao).
- Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray).
- Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in
multiple places (Bjorn Helgaas)"
* tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
ACPI: property: Satisfy kernel doc validator (part 2)
ACPI: property: Satisfy kernel doc validator (part 1)
ACPI: property: Make acpi_node_prop_read() static
ACPI: property: Remove dead code
ACPI: property: Fix fwnode string properties matching
ACPI: OSL: Clean up printing messages
ACPI: OSL: Rework acpi_check_resource_conflict()
ACPI: APEI: ERST: remove unneeded semicolon
ACPI: thermal: Clean up printing messages
ACPI: video: Clean up printing messages
ACPI: button: Clean up printing messages
ACPI: battery: Clean up printing messages
ACPI: AC: Clean up printing messages
ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
ACPI: utils: Clean up printing messages
ACPI: scan: Clean up printing messages
ACPI: bus: Clean up printing messages
ACPI: PM: Clean up printing messages
ACPI: power: Clean up printing messages
ACPI: APEI: Add is_generic_error() to identify GHES sources
...
Replace all of the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in bus.c with pr_debug() and pr_info(), respectively, drop the
_COMPONENT and ACPI_MODULE_NAME() definitions that are not used any
more and replace direct printk() invocations with the matching
pr_*() calls (with a couple of exceptions where the log level is
decreased).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.4 introduced a new _OSC capability that is used negotiate native
connection manager support. Connection manager is the entity that is
responsible for tunneling over the USB4 fabric. If the platform rejects
the native access then firmware based connection manager is used.
The new _OSC also includes a set of bits that can be used to disable
certain tunnel types such as PCIe for security reasons for instance.
This implements the new USB4 _OSC so that we try to negotiate native
USB4 support if the Thunderbolt/USB4 (CONFIG_USB4) driver is enabled.
Drivers can determine what was negotiated by checking two new variables
exposed in this patch.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The platform _OSC can change the hardware state when query bit is not
set. According to ACPI spec it is recommended that the OS runs _OSC with
query bit set until the platform does not mask any of the capabilities.
Then it should run it with query bit clear in order to actually commit
the changes. Linux has not been doing this for the reasons that there
has not been anything to commit, until now.
The ACPI 6.4 introduced _OSC for USB4 to allow the OS to negotiate
native control over USB4 tunneling. The platform might implement this so
that it only activates the software connection manager path when the OS
calls the _OSC with the query bit clear. Otherwise it may default to the
firmware connection manager, for instance.
For this reason modify the _OSC support so that we first execute it with
query bit set, then use the returned value as base of the features we
want to control and run the _OSC again with query bit clear. This also
follows what Windows is doing.
Also rename the function to better match what it does.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get
wrong, as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception of
the last "obviously correct" patch that updated a FALLTHROUGH comment
that got merged last weekend.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4hAAg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfRACcCp48StLg4V7XcZ41eQYES/DVwxkAnjnZs+La
Y7F+o2p8DiuLLQamdEyB
=lHr1
-----END PGP SIGNATURE-----
Merge tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY/Thunderbolt driver updates from Greg KH:
"Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get wrong,
as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception
of the last "obviously correct" patch that updated a FALLTHROUGH
comment that got merged last weekend"
* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
usb: musb: gadget: Use fallthrough pseudo-keyword
usb: typec: Add QCOM PMIC typec detection driver
USB: serial: option: add Cellient MPL200 card
usb: typec: tcpci_maxim: Add support for Sink FRS
usb: typec: tcpci: Implement callbacks for FRS
usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
usb: typec: tcpci_maxim: Chip level TCPC driver
usb: typec: tcpci: Add set_vbus tcpci callback
usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
USB: serial: ftdi_sio: use cur_altsetting for consistency
USB: serial: option: Add Telit FT980-KS composition
USB: core: remove polling for /sys/kernel/debug/usb/devices
usb: typec: add support for STUSB160x Type-C controller family
usb: typec: add typec_find_pwr_opmode
usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
...
Until we tell ACPI that we support generic initiators, it will have
to operate in fall back domain mode and all _PXM entries should
be on existing non GI domains.
This patch sets the relevant OSC bit to make that happen.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This function will be needed by the Thunderbolt driver when it parses
ACPI description for linking tunneled ports to the Thunderbolt
controller device.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
kmemleak reported backtrace:
[<bbee0454>] kmem_cache_alloc_trace+0x128/0x260
[<6677f215>] i2c_acpi_install_space_handler+0x4b/0xe0
[<1180f4fc>] i2c_register_adapter+0x186/0x400
[<6083baf7>] i2c_add_adapter+0x4e/0x70
[<a3ddf966>] intel_gmbus_setup+0x1a2/0x2c0 [i915]
[<84cb69ae>] i915_driver_probe+0x8d8/0x13a0 [i915]
[<81911d4b>] i915_pci_probe+0x48/0x160 [i915]
[<4b159af1>] pci_device_probe+0xdc/0x160
[<b3c64704>] really_probe+0x1ee/0x450
[<bc029f5a>] driver_probe_device+0x142/0x1b0
[<d8829d20>] device_driver_attach+0x49/0x50
[<de71f045>] __driver_attach+0xc9/0x150
[<df33ac83>] bus_for_each_dev+0x56/0xa0
[<80089bba>] driver_attach+0x19/0x20
[<cc73f583>] bus_add_driver+0x177/0x220
[<7b29d8c7>] driver_register+0x56/0xf0
In i2c_acpi_remove_space_handler(), a leak occurs whenever the
"data" parameter is initialized to 0 before being passed to
acpi_bus_get_private_data().
This is because the NULL pointer check in acpi_bus_get_private_data()
(condition->if(!*data)) returns EINVAL and, in consequence, memory is
never freed in i2c_acpi_remove_space_handler().
Fix the NULL pointer check in acpi_bus_get_private_data() to follow
the analogous check in acpi_get_data_full().
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rather than setting debug output flags during early init, its makes
more sense to simply re-define ACPI_DEBUG_DEFAULT specifically for
Linux.
ACPICA commit 60903715711f4b00ca1831779a8a23279a66497d
Link: https://github.com/acpica/acpica/commit/60903715
Fixes: ce5cbf5349 ("ACPI: Set debug output flags independent of ACPICA")
Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the PRP0001 case, the compatible string may have additional data
affiliated with the device. When we call device_get_match_data() on
such device, we will get nothing since currently
acpi_device_get_match_data() doesn't respect PRP0001.
To fix the above, try acpi_of_match_device() if there is no ACPI
table in the driver.
Anyway, note that the device is expected to get its own proper
ACPI ID.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There was a divergence between Linux and ACPICA on the definition of
ACPI_DEBUG_DEFAULT. This divergence was solved by taking ACPICA's
definition in 4c1379d7bb. After resolving the divergence, it was
clear that Linux users wanted to use their old set of debug flags.
This change fixes the divergence by setting these debug flags during
acpi_early_init() rather than during global variable initialization
in acpixf.h (owned by ACPICA).
Fixes: 4c1379d7bb ("ACPICA: Debug output: Add option to display method/object evaluation")
Reported-by: Michael J Ruhl <michael.j.ruhl@intel.com>
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some systems have had functional issues since commit 5a8361f7ec
(ACPICA: Integrate package handling with module-level code) that,
among other things, changed the initial values of the
acpi_gbl_group_module_level_code and acpi_gbl_parse_table_as_term_list
global flags in ACPICA which implicitly caused acpi_ec_ecdt_probe() to
be called before acpi_load_tables() on the vast majority of platforms.
Namely, before commit 5a8361f7ec, acpi_load_tables() was called from
acpi_early_init() if acpi_gbl_parse_table_as_term_list was FALSE and
acpi_gbl_group_module_level_code was TRUE, which almost always was
the case as FALSE and TRUE were their initial values, respectively.
The acpi_gbl_parse_table_as_term_list value would be changed to TRUE
for a couple of platforms in acpi_quirks_dmi_table[], but it remained
FALSE in the vast majority of cases.
After commit 5a8361f7ec, the initial values of the two flags have
been reversed, so in effect acpi_load_tables() has not been called
from acpi_early_init() any more. That, in turn, affects
acpi_ec_ecdt_probe() which is invoked before acpi_load_tables() now
and it is not possible to evaluate the _REG method for the EC address
space handler installed by it. That effectively causes the EC address
space to be inaccessible to AML on platforms with an ECDT matching the
EC device definition in the DSDT and functional problems ensue in
there.
Because the default behavior before commit 5a8361f7ec was to call
acpi_ec_ecdt_probe() after acpi_load_tables(), it should be safe to
do that again. Moreover, the EC address space handler installed by
acpi_ec_ecdt_probe() is only needed for AML to be able to access the
EC address space and the only AML that can run during acpi_load_tables()
is module-level code which only is allowed to access address spaces
with default handlers (memory, I/O and PCI config space).
For this reason, move the acpi_ec_ecdt_probe() invocation back to
acpi_bus_init(), from where it was taken away by commit d737f333b2
(ACPI: probe ECDT before loading AML tables regardless of module-level
code flag), and put it after the invocation of acpi_load_tables() to
restore the original code ordering from before commit 5a8361f7ec.
Fixes: 5a8361f7ec ("ACPICA: Integrate package handling with module-level code")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199981
Reported-by: step-ali <sunmooon15@gmail.com>
Reported-by: Charles Stanhope <charles.stanhope@gmail.com>
Tested-by: Charles Stanhope <charles.stanhope@gmail.com>
Reported-by: Paulo Nascimento <paulo.ulusu@googlemail.com>
Reported-by: David Purton <dcpurton@marshwiggle.net>
Reported-by: Adam Harvey <adam@adamharvey.name>
Reported-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Jean-Marc Lenoir <archlinux@jihemel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of relying on the "platform_notify" callback hook,
introducing separate notification function
acpi_platform_notify() and calling that directly from
drivers core when device entries are added and removed.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It was discovered that AML tables were loaded before or after the
ECDT depending on acpi_gbl_execute_tables_as_methods. According to
the ACPI spec, the ECDT should be loaded before the namespace is
populated by loading AML tables (DSDT and SSDT). Since the ECDT
should be loaded early in the boot process, this change moves the
ECDT probing to acpi_early_init.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Calling dmi_check_system() early only works on X86. Other
architectures initialize the DMI subsystem later so it's not
ready yet when ACPI itself gets initialized.
In the best case it results in a useless call to a function which
will do nothing. But depending on the dmi implementation, it could
also result in warnings. Best is to not call the function when it
can't work and isn't needed.
Additionally, if anyone ever needs to add non-x86 quirks, it would
surprisingly not work, so document the limitation to avoid confusion.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: cce4f632db (ACPI: fix early DSDT dmi check warnings on ia64)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix white space in the argument list of acpi_device_remove().
Signed-off-by: Tom Todd <thomas.m.a.todd@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reverts commit 36904703ae (ACPI / bus: Parse tables as term_list
for Dell XPS 9570 and Precision M5530).
Since commit 5a8361f7ec (ACPICA: Integrate package handling with
module-level code), acpi_gbl_execute_tables_as_methods is always
true, so we can remove the quirk for XPS 9570/Precision M5530.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Was acpi_gbl_parse_table_as_term_list, changed to:
acpi_gbl_execute_tables_as_methods.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Constify device_get_match_data() as OF and ACPI variants return
constant value.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Do the renaming to be consistent with its sibling, i.e.
of_device_get_match_data().
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As well as its sibling of_device_get_match_data() has no such checks,
no need to do it in acpi_get_match_data().
First of all, we are not supposed to call fwnode API like this without
driver attached.
Second, since __acpi_match_device() does check input parameter there is
no need to duplicate it outside.
And last but not least one, the API should still serve the cases when
ACPI device is enumerated via PRP0001. In such case driver has neither
ACPI table nor driver data there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When __acpi_match_device() is called it would be possible to have
ACPI ID table a NULL pointer. To avoid potential dereference,
check for this before traverse.
While here, remove redundant 'else'.
Note, this patch implies a bit of refactoring acpi_of_match_device()
to return pointer to OF ID when matched followed by refactoring
__acpi_match_device() to return either ACPI or OF ID when matches.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update the ACPICA kernel code to upstream revision 20180105 including:
* Assorted fixes (Jung-uk Kim).
* Support for X32 ABI compilation (Anuj Mittal).
* Update of ACPICA copyrights to 2018 (Bob Moore).
- Prepare for future modifications to avoid executing the _STA control
method too early (Hans de Goede).
- Make the processor performance control library code ignore _PPC
notifications if they cannot be handled and fix up the C1 idle
state definition when it is used as a fallback state (Chen Yu,
Yazen Ghannam).
- Make it possible to use the SPCR table on x86 and to replace the
original IORT table with a new one from initrd (Prarit Bhargava,
Shunyong Yang).
- Add battery-related quirks for Asus UX360UA and UX410UAK and add
quirks for table parsing on Dell XPS 9570 and Precision M5530
(Kai Heng Feng).
- Address static checker warnings in the CPPC code (Gustavo Silva).
- Avoid printing a raw pointer to the kernel log in the smart
battery driver (Greg Kroah-Hartman).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=rVdp
-----END PGP SIGNATURE-----
Merge tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These are mostly fixes and cleanups, a few new quirks, a couple of
updates related to the handling of ACPI tables and ACPICA copyrights
refreshment.
Specifics:
- Update the ACPICA kernel code to upstream revision 20180105
including:
* Assorted fixes (Jung-uk Kim)
* Support for X32 ABI compilation (Anuj Mittal)
* Update of ACPICA copyrights to 2018 (Bob Moore)
- Prepare for future modifications to avoid executing the _STA
control method too early (Hans de Goede)
- Make the processor performance control library code ignore _PPC
notifications if they cannot be handled and fix up the C1 idle
state definition when it is used as a fallback state (Chen Yu,
Yazen Ghannam)
- Make it possible to use the SPCR table on x86 and to replace the
original IORT table with a new one from initrd (Prarit Bhargava,
Shunyong Yang)
- Add battery-related quirks for Asus UX360UA and UX410UAK and add
quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai
Heng Feng)
- Address static checker warnings in the CPPC code (Gustavo Silva)
- Avoid printing a raw pointer to the kernel log in the smart battery
driver (Greg Kroah-Hartman)"
* tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: sbshc: remove raw pointer from printk() message
ACPI: SPCR: Make SPCR available to x86
ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
ACPI / tables: Add IORT to injectable table list
ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
ACPICA: Update version to 20180105
ACPICA: All acpica: Update copyrights to 2018
ACPI / processor: Set default C1 idle state description
ACPI / battery: Add quirk for Asus UX360UA and UX410UAK
ACPI: processor_perflib: Do not send _PPC change notification if not ready
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
ACPI / bus: Do not call _STA on battery devices with unmet dependencies
PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
ACPI: export acpi_bus_get_status_handle()
ACPICA: Add a missing pair of parentheses
ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR()
ACPICA: Avoid NULL pointer arithmetic
ACPICA: Linux: add support for X32 ABI compilation
ACPI / video: Use true for boolean value
The i2c touchpad on Dell XPS 9570 and Precision M5530 doesn't work out
of box.
The touchpad relies on its _INI method to update its _HID value from
XXXX0000 to SYNA2393.
Also, the _STA relies on value of I2CN to report correct status.
Set acpi_gbl_parse_table_as_term_list so the value of I2CN can be
correctly set up, and _INI can get run. The ACPI table in this machine
is designed to get parsed this way.
Also, change the quirk table to a more generic name.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198515
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The battery code uses acpi_device->dep_unmet to check for unmet deps and
if there are unmet deps it does not bind to the device to avoid errors
about missing OpRegions when calling ACPI methods on the device.
The missing OpRegions when there are unmet deps problem also applies to
the _STA method of some battery devices and calling it too early results
in errors like these:
[ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
[GenericSerialBus] (20170831/evregion-166)
[ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler
(20170831/exfldio-299)
[ 0.123618] ACPI Error: Method parse/execution failed
\_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)
This commit fixes these errors happening when acpi_get_bus_status gets
called by checking dep_unmet for battery devices and reporting a status
of 0 until all dependencies are met.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some modular drivers need this, export it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
OF has of_device_get_match_data() function to extract driver specific data
structure. Add a similar function for ACPI.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
ACPICA commit 3d837b5d4b1033942b4d91c7d3801a09c3157918
acpi_gbl_verify_table_checksum is used to avoid validating (mapping) an entire
table in OS boot stage. 2nd "Reload" check in acpi_tb_install_standard_table()
is prepared for the same purpose. So this patch combines them together
using a renamed acpi_gbl_enable_table_validation flag. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/3d837b5d
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel should decrements the reference count of ACPI device
when the scheduling of ACPI hotplug work failed, and evaluates
_OST to notify BIOS the failure.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16
bytes. Instead we convert them to use guid_t type. At the same time we
convert current users.
acpi_str_to_uuid() becomes useless after the conversion and it's safe to
get rid of it.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There are new types and helpers that are supposed to be used in new code.
As a preparation to get rid of legacy types and API functions do
the conversion here.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Several Bay / Cherry Trail devices (all of which ship with Windows 10) hide
the LPSS PWM controller in ACPI, typically the _STA method looks like this:
Method (_STA, 0, NotSerialized) // _STA: Status
{
If (OSID == One)
{
Return (Zero)
}
Return (0x0F)
}
Where OSID is some dark magic seen in all Cherry Trail ACPI tables making
the machine behave differently depending on which OS it *thinks* it is
booting, this gets set in a number of ways which we cannot control, on
some newer machines it simple hardcoded to "One" aka win10.
This causes the PWM controller to get hidden, which means Linux cannot
control the backlight level on cht based tablets / laptops.
Since loading the driver for this does no harm (the only in kernel user
of it is the i915 driver, which will only uses it when it needs it), this
commit makes acpi_bus_get_status() always set status to ACPI_STA_DEFAULT
for the LPSS PWM device, fixing the lack of backlight control.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Rename the new file to utils.c ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert: dc6db24d24 ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting")
The mapping of "cpuid <-> nodeid" is established at boot time via ACPI
tables to keep associations of workqueues and other node related items
consistent across cpu hotplug.
But, ACPI tables are unreliable and failures with that boot time mapping
have been reported on machines where the ACPI table and the physical
information which is retrieved at actual hotplug is inconsistent.
Revert the mapping implementation so it can be replaced with a less error
prone approach.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Cc: rjw@rjwysocki.net
Cc: linux-acpi@vger.kernel.org
Cc: guzheng1@huawei.com
Cc: izumi.taku@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1488528147-2279-2-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When using devicetree stuff like i2c_client.name or spi_device.modalias
is initialized to the first DT compatible id with the vendor prefix
stripped. Since some drivers rely on this try to replicate it when using
ACPI with DT ids.
Signed-off-by: Dan O'Donovan <dan@emutex.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpica:
ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
ACPICA: Tables: Allow FADT to be customized with virtual address
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
* acpi-scan:
ACPI: do not warn if _BQC does not exist
Since all users are cleaned up, remove the 2 deprecated APIs due to no
users.
As a Linux variable rather than an ACPICA variable, acpi_gbl_permanent_mmap
is renamed to acpi_permanent_mmap to have a consistent coding style across
entire Linux ACPI subsystem.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename CONFIG_SCHED_ITMT for Intel Turbo Boost Max Technology 3.0
to CONFIG_SCHED_MC_PRIO. This makes the configuration extensible
in future to other architectures that wish to similarly establish
CPU core priorities support in the scheduler.
The description in Kconfig is updated to reflect this change with
added details for better clarity. The configuration is explicitly
default-y, to enable the feature on CPUs that have this feature.
It has no effect on non-TBM3 CPUs.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Cc: jolsa@redhat.com
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: rjw@rjwysocki.net
Link: http://lkml.kernel.org/r/2b2ee29d93e3f162922d72d0165a1405864fbb23.1480444902.git.tim.c.chen@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull irq updates from Thomas Gleixner:
"The irq departement proudly presents:
- A rework of the core infrastructure to optimally spread interrupt
for multiqueue devices. The first version was a bit naive and
failed to take thread siblings and other details into account.
Developed in cooperation with Christoph and Keith.
- Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is
active then no further softirq processsing on interrupt return
happens. Otherwise we try to delegate and still run another batch
of network packets in the irq return path, which then tries to
delegate to ksoftirqd .....
- A proper machine parseable sysfs based alternative for
/proc/interrupts.
- ACPI support for the GICV3-ITS and ARM interrupt remapping
- Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC
- A new irq chip for the JCore (SuperH)
- The usual pile of small fixlets in core and irqchip drivers"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
softirq: Let ksoftirqd do its job
genirq: Make function __irq_do_set_handler() static
ARM/dts: Add EXTI controller node to stm32f429
ARM/STM32: Select external interrupts controller
drivers/irqchip: Add STM32 external interrupts support
Documentation/dt-bindings: Document STM32 EXTI controller bindings
irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs
pci/msi: Retrieve affinity for a vector
genirq/affinity: Remove old irq spread infrastructure
genirq/msi: Switch to new irq spreading infrastructure
genirq/affinity: Provide smarter irq spreading infrastructure
genirq/msi: Add cpumask allocation to alloc_msi_entry
genirq: Expose interrupt information through sysfs
irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization
irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI
irqchip/gicv3-its: Probe ITS in the ACPI way
irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI
irqchip/gicv3-its: Cleanup for ITS domain initialization
PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table
ACPI: Add new IORT functions to support MSI domain handling
...
Pull x86 apic updates from Ingo Molnar:
"The main changes are:
- Persistent CPU/node numbering across CPU hotplug/unplug events.
This is a pretty involved series of changes that first fetches all
the information during bootup and then uses it for the various
hotplug/unplug methods. (Gu Zheng, Dou Liyang)
- IO-APIC hot-add/remove fixes and enhancements. (Rui Wang)
- ... various fixes, cleanups and enhancements"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/apic: Fix silent & fatal merge conflict in __generic_processor_info()
acpi: Fix broken error check in map_processor()
acpi: Validate processor id when mapping the processor
acpi: Provide mechanism to validate processors in the ACPI tables
x86/acpi: Set persistent cpuid <-> nodeid mapping when booting
x86/acpi: Enable MADT APIs to return disabled apicids
x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping
x86/acpi: Enable acpi to register all possible cpus at boot time
x86/numa: Online memory-less nodes at boot time
x86/apic: Get rid of apic_version[] array
x86/apic: Order irq_enter/exit() calls correctly vs. ack_APIC_irq()
x86/ioapic: Ignore root bridges without a companion ACPI device
x86/apic: Update comment about disabling processor focus
x86/smpboot: Check APIC ID before setting up default routing
x86/ioapic: Fix IOAPIC failing to request resource
x86/ioapic: Fix lost IOAPIC resource after hot-removal and hotadd
x86/ioapic: Fix setup_res() failing to get resource
x86/ioapic: Support hot-removal of IOAPICs present during boot
x86/ioapic: Change prototype of acpi_ioapic_add()
x86/apic, ACPI: Fix incorrect assignment when handling apic/x2apic entries
...
This patch enables the following initialization order for the
new table loading mode (which is enabled by setting
acpi_gbl_parse_table_as_term_list to TRUE):
1. Install default region handlers (SystemMemory, SystemIo, PciConfig,
EmbeddedControl via ECDT) without evaluating _REG;
2. Load the table and execute the module level AML opcodes instantly.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
IORT shows representation of IO topology for ARM based systems.
It describes how various components are connected together on
parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec.
http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf
Initial support allows to detect IORT table presence and save its
root pointer obtained through acpi_get_table(). The pointer validity
depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap
is not set while using IORT nodes we would dereference unmapped pointers.
For the aforementioned reason call acpi_iort_init() from acpi_init()
which guarantees acpi_gbl_permanent_mmap to be set at that point.
Add generic helpers which are helpful for scanning and retrieving
information from IORT table content. List of the most important helpers:
- iort_find_dev_node() finds IORT node for a given device
- iort_node_map_rid() maps device RID and returns IORT node which provides
final translation
IORT support is placed under drivers/acpi/arm64/ new directory due to its
ARM64 specific nature. The code there is considered only for ARM64.
The long term plan is to keep all ARM64 specific tables support
in this place e.g. GTDT table.
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* acpi-processor:
ACPI: enable ACPI_PROCESSOR_IDLE on ARM64
arm64: add support for ACPI Low Power Idle(LPI)
drivers: firmware: psci: initialise idle states using ACPI LPI
cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64}
arm64: cpuidle: drop __init section marker to arm_cpuidle_init
ACPI / processor_idle: Add support for Low Power Idle(LPI) states
ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE
* acpi-cppc:
mailbox: pcc: Add PCC request and free channel declarations
ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data
ACPI: CPPC: Return error if _CPC is invalid on a CPU
* acpi-apei:
ACPI / APEI: Add Boot Error Record Table (BERT) support
ACPI / einj: Make error paths more talkative
ACPI / einj: Convert EINJ_PFX to proper pr_fmt
* acpi-sleep:
ACPI: Execute _PTS before system reboot
ACPI 6.0 introduced an optional object _LPI that provides an alternate
method to describe Low Power Idle states. It defines the local power
states for each node in a hierarchical processor topology. The OSPM can
use _LPI object to select a local power state for each level of processor
hierarchy in the system. They used to produce a composite power state
request that is presented to the platform by the OSPM.
Since multiple processors affect the idle state for any non-leaf hierarchy
node, coordination of idle state requests between the processors is
required. ACPI supports two different coordination schemes: Platform
coordinated and OS initiated.
This patch adds initial support for Platform coordination scheme of LPI.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for ACPI reconfiguration notifiers to allow subsystems
to react to changes in the ACPI tables that happen after the initial
enumeration. This is similar with the way dynamic device tree
notifications work.
The reconfigure notifications supported for now are device add and
device remove.
Since ACPICA allows only one table notification handler, this patch
makes the table notifier function generic and moves it out of the
sysfs specific code.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds support for platform initited graceful shutdown as
described in sections 5.6.6(Table-143) and 6.3.5.1 of ACPI 6.1 spec
The OSPM will get a graceful shutdown request via a Notify operator
on \_SB device with a value of 0x81 per section 5.6.6. Following the
shutdown request from platform the OSPM needs to follow the
processing sequence as described in section 6.2.5.1.
v3
* Switched to regular work with delays from delayed work
* Dropped changes to actypes.h
* Small style changes
v2
* Switched from standalone driver to a simple notify handler
v1
* Initial
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In acpi_subsystem_init(), function acpi_enable_subsystem() is
called to do the real job. However with different flags passed to
acpi_enable_subsystem(), different code is executed.
In acpi_subsystem_init(), with "~ACPI_NO_ACPI_ENABLE" passed in, it
will only switch over the platform to the ACPI mode. The remaining
part of acpi_enable_subsystem() is done when acpi_bus_init() is
called.
So the comments above acpi_subsystem_init() is not exact, change it
here.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_print_osc_error() basically duplicates the functionalit of
acpi_handle_debug(), so use that one in there.
While at it, convert the explicit KERN_DEBUG prints to pr_debug()
(and apply it to continuation messages too).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the Windows probing result, during the table loading, the EC
device described in the ECDT should be used. And the ECDT EC is also
effective during the period the namespace objects are initialized (we can
see a separate process executing _STA/_INI on Windows before executing
other device specific control methods, for example, EC._REG). During the
device enumration, the EC device described in the DSDT should be used. But
there are differences between Linux and Windows around the device probing
order. Thus in Linux, we should enable the DSDT EC as early as possible
before enumerating devices in order not to trigger issues related to the
device enumeration order differences.
This patch thus converts acpi_boot_ec_enable() into acpi_ec_dsdt_probe() to
fix the gap. This also fixes a user reported regression triggered after we
switched the "table loading"/"ECDT support" to be ACPI spec 2.0 compliant.
Fixes: 59f0aa9480 (ACPI 2.0 / ECDT: Remove early namespace reference from EC)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=119261
Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With wrong ECDT fixes reverted, it is possible to put ECDT probing before
acpi_enable_subsystem().
But the ultimate purpose of ECDT re-enabling is to put the ECDT probing
before the namespace initialization (acpi_load_tables()). This patch
achieves this with protections so that we can enable it later when all
necessary corrections are upstreamed.
Link 4: https://bugzilla.kernel.org/show_bug.cgi?id=112911
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are several reports of freeze on enabling HWP (Hardware PStates)
feature on Skylake-based systems by the Intel P-states driver. The root
cause is identified as the HWP interrupts causing BIOS code to freeze.
HWP interrupts use the thermal LVT which can be handled by Linux
natively, but on the affected Skylake-based systems SMM will respond
to it by default. This is a problem for several reasons:
- On the affected systems the SMM thermal LVT handler is broken (it
will crash when invoked) and a BIOS update is necessary to fix it.
- With thermal interrupt handled in SMM we lose all of the reporting
features of the arch/x86/kernel/cpu/mcheck/therm_throt driver.
- Some thermal drivers like x86-package-temp depend on the thermal
threshold interrupts signaled via the thermal LVT.
- The HWP interrupts are useful for debugging and tuning
performance (if the kernel can handle them).
The native handling of thermal interrupts needs to be enabled
because of that.
This requires some way to tell SMM that the OS can handle thermal
interrupts. That can be done by using _OSC/_PDC in processor
scope very early during ACPI initialization.
The meaning of _OSC/_PDC bit 12 in processor scope is whether or
not the OS supports native handling of interrupts for Collaborative
Processor Performance Control (CPPC) notifications. Since on
HWP-capable systems CPPC is a firmware interface to HWP, setting
this bit effectively tells the firmware that the OS will handle
thermal interrupts natively going forward.
For details on _OSC/_PDC refer to:
http://www.intel.com/content/www/us/en/standards/processor-vendor-specific-acpi-specification.html
To implement the _OSC/_PDC handshake as described, introduce a new
function, acpi_early_processor_osc(), that walks the ACPI
namespace looking for ACPI processor objects and invokes _OSC for
them with bit 12 in the capabilities buffer set and terminates the
namespace walk on the first success.
Also modify intel_thermal_interrupt() to clear HWP status bits in
the HWP_STATUS MSR to acknowledge HWP interrupts (which prevents
them from firing continuously).
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject & changelog, function rename ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Factor out the code that finds the first physical device
of a given ACPI device. It is used in several places.
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-scan:
ACPI: Fix white space in a structure definition
ACPI / utils: Add acpi_dev_present()
ACPI / scan: Fix acpi_bus_id_list bookkeeping
ACPI / scan: set status to 0 if _STA failed
* acpi-bus:
ACPI / bus: Show _OSC UUID when _OSC fails
ACPI / bus: Tidy up _OSC error spacing
* acpi-osl:
ACPI / OSL: Add kerneldoc comments to memory mapping functions
* acpi-pm:
ACPI / PM: Support D3 COLD device in old BIOS for ZPODD
When _OSC fails and especially when it fails due to an invalid UUID,
it's helpful to show the UUID that we tried.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The whitespace in _OSC error reports is weird. Improve it.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch converts AML debugger into a loadable module.
Note that, it implements driver unloading at the level dependent on the
module reference count. Which means if ACPI debugger is being used by a
userspace program, "rmmod acpi_dbg" should result in failure.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds /sys/kernel/debug/acpi/acpidbg, which can be used by
userspace programs to access ACPICA debugger functionalities.
Known issue:
1. IO flush support
acpi_os_notify_command_complete() and acpi_os_wait_command_ready() can
be used by acpi_dbg module to implement .flush() filesystem operation.
While this patch doesn't go that far. It then becomes userspace tool's
duty now to flush old commands before executing new batch mode commands.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit removes all CONFIG_.*{,_MODULE} in ACPI code, replacing it
with IS_ENABLED().
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-pm:
ACPI / bus: Move duplicate code to a separate new function
mfd: Add support for Intel Sunrisepoint LPSS devices
dmaengine: add a driver for Intel integrated DMA 64-bit
mfd: make mfd_remove_devices() iterate in reverse order
driver core: implement device_for_each_child_reverse()
klist: implement klist_prev()
Driver core: wakeup the parent device before trying probe
ACPI / PM: Attach ACPI power domain only once
PM / QoS: Make it possible to expose device latency tolerance to userspace
ACPI / PM: Update the copyright notice and description of power.c
After merging commit 712e960f0e (ACPI / PM: Attach ACPI power
domain only once) with commit 1dcc3d3362 (ACPI / bus: Move ACPI
bus type registration) there is some duplicate code in
acpi_device_is_first_physical_node() and acpi_companion_match()
that can be moved to a separate routine and called from both
places.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Conflicts:
drivers/acpi/scan.c
The conflict is resolved by moving the just introduced
acpi_device_is_first_physical_node() to bus.c and using
the existing acpi_companion_match() from there.
There will be an additional commit to combine the two.
Move the registration of the ACPI bus type to acpi_bus_init() and
avoid using ACPI going forward if it fails (too many things depend on
the presence of the ACPI bus type).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To reduce the size of scan.c and improve the readability of it, move
code related to device notification, the definitions of the ACPI bus
operations and the driver management code to drivers/acpi/bus.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To reduce the size of scan.c and improve the readability of it, move
code related device matching into drivers/acpi/bus.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 73f7d1ca32 "ACPI / init: Run acpi_early_init() before
timekeeping_init()" moved the ACPI subsystem initialization,
including the ACPI mode enabling, to an earlier point in the
initialization sequence, to allow the timekeeping subsystem
use ACPI early. Unfortunately, that resulted in boot regressions
on some systems and the early ACPI initialization was moved toward
its original position in the kernel initialization code by commit
c4e1acbb35 "ACPI / init: Invoke early ACPI initialization later".
However, that turns out to be insufficient, as boot is still broken
on the Tyan S8812 mainboard.
To fix that issue, split the ACPI early initialization code into
two pieces so the majority of it still located in acpi_early_init()
and the part switching over the platform into the ACPI mode goes into
a new function, acpi_subsystem_init(), executed at the original early
ACPI initialization spot.
That fixes the Tyan S8812 boot problem, but still allows ACPI
tables to be loaded earlier which is useful to the EFI code in
efi_enter_virtual_mode().
Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141
Fixes: 73f7d1ca32 "ACPI / init: Run acpi_early_init() before timekeeping_init()"
Reported-and-tested-by: Marius Tolzmann <tolzmann@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Introduce ACPI_IRQ_MODEL_GIC which is needed for ARM64 as GIC is
used, and then register device's gsi with the core IRQ subsystem.
acpi_register_gsi() is similar to DT based irq_of_parse_and_map(),
since gsi is unique in the system, so use hwirq number directly
for the mapping.
We are going to implement stacked domains when GICv2m, GICv3, ITS
support are added.
CC: Marc Zyngier <marc.zyngier@arm.com>
Originally-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Tested-by: Yijing Wang <wangyijing@huawei.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Jon Masters <jcm@redhat.com>
Tested-by: Timur Tabi <timur@codeaurora.org>
Tested-by: Robert Richter <rrichter@cavium.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Revert parts of f244d8b623 ("ACPIPHP / radeon / nouveau: Fix VGA
switcheroo problem related to hotplug").
A previous commit 5493b31f0b55 ("PCI: Add pci_ignore_hotplug() to ignore
hotplug events for a device") added equivalent functionality implemented in
a different way for both acpiphp and pciehp.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Rajat Jain <rajatxjain@gmail.com>
There are global variables and functions not upstreamed to the ACPICA code
base. Such symbols still can be referenced by external users as they are
listed in the acpixf.h. This patch uses ACPI_GLOBAL and
ACPI_EXTERNAL_RETURN_STATUS mechanism to add stub support for such symbols.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpica: (63 commits)
ACPICA: Namespace: Remove _PRP method support.
ACPI: Fix x86 regression related to early mapping size limitation
ACPICA: Tables: Add mechanism to control early table checksum verification.
ACPICA: acpidump: Fix repetitive table dump in -n mode.
ACPI: Clean up acpi_os_map/unmap_memory() to eliminate __iomem.
ACPICA: Clean up redudant definitions already defined elsewhere
ACPICA: Linux headers: Add <asm/acenv.h> to remove mis-ordered inclusion of <asm/acpi.h>
ACPICA: Linux headers: Add <acpi/platform/aclinuxex.h>
ACPICA: Linux headers: Remove ACPI_PREEMPTION_POINT() due to no usages.
ACPICA: Update version to 20140424.
ACPICA: Comment/format update, no functional change.
ACPICA: Events: Update GPE handling and initialization code.
ACPICA: Remove extraneous error message for large number of GPEs.
ACPICA: Tables: Remove old mechanism to validate if XSDT contains NULL entries.
ACPICA: Tables: Add new mechanism to skip NULL entries in RSDT and XSDT.
ACPICA: acpidump: Add support to force using RSDT.
ACPICA: Back port of improvements on exception code.
ACPICA: Back port of _PRP update.
ACPICA: acpidump: Fix truncated RSDP signature validation.
ACPICA: Linux header: Add support for stubbed externals.
...
* acpi-tables:
ACPI: Fix conflict between customized DSDT and DSDT local copy
* acpi-general:
ACPI: Add acpi_bus_attach_private_data() to attach data to ACPI handle
The following warning message is triggered:
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:136 __early_ioremap+0x11f/0x1f2()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.15.0-rc1-00017-g86dfc6f3-dirty #298
Hardware name: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x036.091920111209 09/19/2011
0000000000000009 ffffffff81b75c40 ffffffff817c627b 0000000000000000
ffffffff81b75c78 ffffffff81067b5d 000000000000007b 8000000000000563
00000000b96b20dc 0000000000000001 ffffffffff300e0c ffffffff81b75c88
Call Trace:
[<ffffffff817c627b>] dump_stack+0x45/0x56
[<ffffffff81067b5d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff81067c3a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81d4b9d5>] __early_ioremap+0x11f/0x1f2
[<ffffffff81d4bc5b>] early_ioremap+0x13/0x15
[<ffffffff81d2b8f3>] __acpi_map_table+0x13/0x18
[<ffffffff817b8d1a>] acpi_os_map_memory+0x26/0x14e
[<ffffffff813ff018>] acpi_tb_acquire_table+0x42/0x70
[<ffffffff813ff086>] acpi_tb_validate_table+0x27/0x37
[<ffffffff813ff0e5>] acpi_tb_verify_table+0x22/0xd8
[<ffffffff813ff6a8>] acpi_tb_install_non_fixed_table+0x60/0x1c9
[<ffffffff81d61024>] acpi_tb_parse_root_table+0x218/0x26a
[<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
[<ffffffff81d610cd>] acpi_initialize_tables+0x57/0x59
[<ffffffff81d5f25d>] acpi_table_init+0x1b/0x99
[<ffffffff81d2bca0>] acpi_boot_table_init+0x1e/0x85
[<ffffffff81d23043>] setup_arch+0x99d/0xcc6
[<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
[<ffffffff81d1bbbe>] start_kernel+0x8b/0x415
[<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
[<ffffffff81d1b5ee>] x86_64_start_reservations+0x2a/0x2c
[<ffffffff81d1b72e>] x86_64_start_kernel+0x13e/0x14d
---[ end trace 11ae599a1898f4e7 ]---
when installing the following table during early stage:
ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL S2600CP 00004000 INTL 20100331)
The regression is caused by the size limitation of the x86 early IO mapping.
The root cause is:
1. ACPICA doesn't split IO memory mapping and table mapping;
2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map
mechanism during early boot stage, which is more suitable for only IO
mappings.
This patch fixes this issue by utilizing acpi_gbl_verify_table_checksum to
disable the table mapping during early stage and enabling it again for the
late stage. In this way, the normal code path is not affected. Then after
the code related to the root cause is cleaned up, the early checksum
verification can be easily re-enabled.
A new boot parameter - acpi_force_table_verification is introduced for
the platforms that require the checksum verification to stop loading bad
tables.
This fix also covers the checksum verification for the table overrides. Now
large tables can also be overridden using the initrd override mechanism.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is already acpi_bus_get_private_data() to get ACPI handle data
which is associated with acpi_bus_private_data_handler(). This patch
is to add acpi_bus_attach_private_data() to make a pair and facilitate
to attach and get data to/from ACPI handle.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fixes the following issue:
If DSDT is customized, no local DSDT copy is needed.
References: https://bugzilla.kernel.org/show_bug.cgi?id=69711
Signed-off-by: Enrico Etxe Arte <goitizena.generoa@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 2.6.35+ <stable@vger.kernel.org> # 2.6.35+
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make the handling of hotplug events in acpi_bus_notify() slightly
cleaner by using an extra local variable to indicate when
acpi_hotplug_schedule() should be called.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 1a699476e2 "ACPI / hotplug / PCI: Hotplug notifications from
acpi_bus_notify()" changed the root notify handler, acpi_bus_notify(),
to block unknown type norifications, but it overlooked the fact that
they might be propagated to drivers via the ->notify() callback.
Fix the problem by allowing drivers to receive unknown type
notifications via ->notify() as before.
Fixes: 1a699476e2 (ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify())
Reported-and-tested-by: Mantas Mikulėnas <grawity@gmail.com>
Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-ost:
ACPI: Drop acpi_evaluate_hotplug_ost() and ACPI_HOTPLUG_OST
ACPI: use device name LNXSYBUS.xx for ACPI \_SB and \_TZ objects
ACPI / processor: use acpi_evaluate_ost() to replace open-coded version
ACPI / PAD / xen: use acpi_evaluate_ost() to replace open-coded version
ACPI / PAD: use acpi_evaluate_ost() to replace open-coded version
ACPI: rename acpi_evaluate_hotplug_ost() to acpi_evaluate_ost()
Since the only function executed by acpi_hotplug_execute() is
acpi_device_hotplug() and it only is called by the ACPI core,
simplify its definition so that it only takes two arguments, the
ACPI device object pointer and event code, rename it to
acpi_hotplug_schedule() and move its header from acpi_bus.h to
the ACPI core's internal header file internal.h. Modify the
definition of acpi_device_hotplug() so that its first argument is
an ACPI device object pointer and modify the definition of
struct acpi_hp_work accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Replace acpi_evaluate_hotplug_ost() with acpi_evaluate_ost()
everywhere and drop the ACPI_HOTPLUG_OST symbol so that hotplug
_OST is supported unconditionally.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Since acpi_bus_notify() is executed on all notifications for all
devices anyway, make it execute acpi_device_hotplug() for all
hotplug events instead of installing notify handlers pointing to
the same function for all hotplug devices.
This change reduces both the size and complexity of ACPI-based device
hotplug code. Moreover, since acpi_device_hotplug() only does
significant things for devices that have either an ACPI scan handler,
or a hotplug context with .eject() defined, and those devices
had notify handlers pointing to acpi_hotplug_notify_cb() installed
before anyway, this modification shouldn't change functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a slight possibility for the ACPI device object pointed to
by adev in acpi_hotplug_notify_cb() to become invalid between the
acpi_bus_get_device() that it comes from and the subsequent dereference
of that pointer under get_device(). Namely, if acpi_scan_drop_device()
runs in parallel with acpi_hotplug_notify_cb(), acpi_device_del_work_fn()
queued up by it may delete the device object in question right after
a successful execution of acpi_bus_get_device() in acpi_bus_notify().
An analogous problem is present in acpi_bus_notify() where the device
pointer coming from acpi_bus_get_device() may become invalid before
it subsequent dereference in the "if" block.
To prevent that from happening, introduce a new function,
acpi_bus_get_acpi_device(), working analogously to acpi_bus_get_device()
except that it will grab a reference to the ACPI device object returned
by it and it will do that under the ACPICA's namespace mutex. Then,
make both acpi_hotplug_notify_cb() and acpi_bus_notify() use
acpi_bus_get_acpi_device() instead of acpi_bus_get_device() so as to
ensure that the pointers used by them will not become stale at one
point.
In addition to that, introduce acpi_bus_put_acpi_device() as a wrapper
around put_device() to be used along with acpi_bus_get_acpi_device()
and make the (new) users of the latter use acpi_bus_put_acpi_device()
too.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
