This has a slight benefit for x86 and has no effect on other targets.
The benefit to x86 is it change the codegen for setting a node to block
from `mov %r0, %r1; or $RB_BLACK, %r1` to `lea RB_BLACK(%r0), %r1` which
saves an instructions.
In all other cases it just replace ALU with ALU (or -> and) which
perform the same on all machines I am aware of.
Total instructions in rbtree.o:
Before - 802
After - 782
so it saves about 20 `mov` instructions.
Link: https://lkml.kernel.org/r/20230404221350.3806566-1-goldstein.w.n@gmail.com
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The last (only) architecture specific arch_idle_time() implementation was
removed with commit be76ea6144 ("s390/idle: remove arch_cpu_idle_time()
and corresponding code").
Therefore remove the now dead code in fs/proc/stat.c as well.
Link: https://lkml.kernel.org/r/20230405143452.2677172-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
"Link:" and "Closes:" tags have to be used with public URLs.
It is difficult to make sure the link is public but at least we can verify
the tag is followed by 'http(s)://'.
With that, we avoid such a tag that is not allowed [1]:
Closes: <number>
Now that we check the "link" tags are followed by a URL, we can relax the
check linked to "Reported-by being followed by a link tag" to only verify
if a "link" tag is present after the "Reported-by" one.
Link: https://lore.kernel.org/linux-doc/CAHk-=wh0v1EeDV3v8TzK81nDC40=XuTdY2MCr0xy3m3FiBV3+Q@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20230314-doc-checkpatch-closes-tag-v4-5-d26d1fa66f9f@tessares.net
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai Wasserbäch <kai@dev.carbon-project.org>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As a follow-up of a previous patch modifying the documentation to allow
using the "Closes:" tag, checkpatch.pl is updated accordingly.
checkpatch.pl now no longer complain when the "Closes:" tag is used by
itself:
commit 76f381bb77 ("checkpatch: warn when unknown tags are used for links")
... or after the "Reported-by:" tag:
commit d7f1d71e5e ("checkpatch: warn when Reported-by: is not followed by Link:")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/373
Link: https://lkml.kernel.org/r/20230314-doc-checkpatch-closes-tag-v4-4-d26d1fa66f9f@tessares.net
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai Wasserbäch <kai@dev.carbon-project.org>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The following commit will allow the use of a similar "link" tag.
Because there is a possibility that other similar tags will be added in
the future and to reduce the number of places where the code will be
modified to allow this new tag, a list with all these "link" tags is now
used.
Two variables are created from it: one to search for such tags and one to
print all tags in a warning message.
Link: https://lkml.kernel.org/r/20230314-doc-checkpatch-closes-tag-v4-3-d26d1fa66f9f@tessares.net
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Joe Perches <joe@perches.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai Wasserbäch <kai@dev.carbon-project.org>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When checking if "Reported-by" tag is followed by "Link:", there is no
need to print the next line if there is no next line.
While at it, also mention in this case that the "Link:" tag should be
followed by a URL, similar to the next warning.
By doing that, the code is now similar to what is done above when checking
if the Co-developed-by tag is properly used.
Link: https://lkml.kernel.org/r/20230314-doc-checkpatch-closes-tag-v4-2-d26d1fa66f9f@tessares.net
Fixes: d7f1d71e5e ("checkpatch: warn when Reported-by: is not followed by Link:")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai Wasserbäch <kai@dev.carbon-project.org>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since v6.3, checkpatch.pl now complains about the use of "Closes:" tags
followed by a link [1]. It also complains if a "Reported-by:" tag is
followed by a "Closes:" one [2].
As detailed in the first patch, this "Closes:" tag is used for a bit of
time, mainly by DRM and MPTCP subsystems. It is used by some bug trackers
to automate the closure of issues when a patch is accepted. It is even
planned to use this tag with bugzilla.kernel.org [3].
The first patch updates the documentation to explain what is this
"Closes:" tag and how/when to use it. The second patch modifies
checkpatch.pl to stop complaining about it.
The DRM maintainers and their mailing list have been added in Cc as they
are probably interested by these two patches as well.
[1] https://lore.kernel.org/all/3b036087d80b8c0e07a46a1dbaaf4ad0d018f8d5.1674217480.git.linux@leemhuis.info/
[2] https://lore.kernel.org/all/bb5dfd55ea2026303ab2296f4a6df3da7dd64006.1674217480.git.linux@leemhuis.info/
[3] https://lore.kernel.org/linux-doc/20230315181205.f3av7h6owqzzw64p@meerkat.local/
This patch (of 5):
Making sure a bug tracker is up to date is not an easy task. For example,
a first version of a patch fixing a tracked issue can be sent a long time
after having created the issue. But also, it can take some time to have
this patch accepted upstream in its final form. When it is done, someone
-- probably not the person who accepted the patch -- has to remember about
closing the corresponding issue.
This task of closing and tracking the patch can be done automatically by
bug trackers like GitLab [1], GitHub [2] and hopefully soon [3]
bugzilla.kernel.org when the appropriated tag is used. The two first ones
accept multiple tags but it is probably better to pick one.
According to commit 76f381bb77 ("checkpatch: warn when unknown tags are used for links"),
the "Closes" tag seems to have been used in the past by a few people and
it is supported by popular bug trackers. Here is how it has been used in
the past:
$ git log --no-merges --format=email -P --grep='^Closes: http' | \
grep '^Closes: http' | cut -d/ -f3-5 | sort | uniq -c | sort -rn
391 gitlab.freedesktop.org/drm/intel
79 github.com/multipath-tcp/mptcp_net-next
8 gitlab.freedesktop.org/drm/msm
3 gitlab.freedesktop.org/drm/amd
2 gitlab.freedesktop.org/mesa/mesa
1 patchwork.freedesktop.org/series/73320
1 gitlab.freedesktop.org/lima/linux
1 gitlab.freedesktop.org/drm/nouveau
1 github.com/ClangBuiltLinux/linux
1 bugzilla.netfilter.org/show_bug.cgi?id=1579
1 bugzilla.netfilter.org/show_bug.cgi?id=1543
1 bugzilla.netfilter.org/show_bug.cgi?id=1436
1 bugzilla.netfilter.org/show_bug.cgi?id=1427
1 bugs.debian.org/625804
Likely here, the "Closes" tag was only properly used with GitLab and
GitHub. We can also see that it has been used quite a few times (and
still used recently) and this is then not a "random tag that makes no
sense" like it was the case with "BugLink" recently [4]. It has also been
misused but that was a long time ago, when it was common to use many
different random tags.
checkpatch.pl script should then stop complaining about this "Closes" tag.
As suggested by Thorsten [5], if this tag is accepted, it should first be
described in the documentation. This is what is done here in this patch.
To avoid confusion, the "Closes" should be used with any public bug
report. No need to check if the underlying bug tracker supports
automations. Having this tag with any kind of public bug reports allows
bots like regzbot to clearly identify patches fixing a specific bug and
avoid false-positives, e.g. patches mentioning it is related to an issue
but not fixing it. As suggested by Thorsten [6] again, if we follow the
same logic, the "Closes" tag should then be used after a "Reported-by"
one.
Note that thanks to this "Closes" tag, the mentioned bug trackers can also
locate where a patch has been applied in different branches and
repositories. If only the "Link" tag is used, the tracking can also be
done but the ticket will not be closed and a manual operation will be
needed. Also, these bug trackers have some safeguards: the closure is
only done if a commit having the "Closes:" tag is applied in a specific
branch. It will then not be closed if a random commit having the same tag
is published elsewhere. Also in case of closure, a notification is sent
to the owners.
Link: https://lkml.kernel.org/r/20230314-doc-checkpatch-closes-tag-v4-0-d26d1fa66f9f@tessares.net
Link: https://docs.gitlab.com/ee/user/project/issues/managing_issues.html#default-closing-pattern [1]
Link: https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/using-keywords-in-issues-and-pull-requests [2]
Link: https://lore.kernel.org/linux-doc/20230315181205.f3av7h6owqzzw64p@meerkat.local/ [3]
Link: https://lore.kernel.org/all/CAHk-=wgs38ZrfPvy=nOwVkVzjpM3VFU1zobP37Fwd_h9iAD5JQ@mail.gmail.com/ [4]
Link: https://lore.kernel.org/all/688cd6cb-90ab-6834-a6f5-97080e39ca8e@leemhuis.info/ [5]
Link: https://lore.kernel.org/linux-doc/2194d19d-f195-1a1e-41fc-7827ae569351@leemhuis.info/ [6]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/373
Link: https://lkml.kernel.org/r/20230314-doc-checkpatch-closes-tag-v4-1-d26d1fa66f9f@tessares.net
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Thorsten Leemhuis <linux@leemhuis.info>
Acked-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai Wasserbäch <kai@dev.carbon-project.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
HRTIMER_MAX_CLOCK_BASES is of enum type hrtimer_base_type. To print it as
an integer, HRTIMER_MAX_CLOCK_BASES should be converted first.
Link: https://lkml.kernel.org/r/TYCP286MB214640FF0E7F04AC3926A39EC6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Below incompatibilities between Python2 and Python3 made lx-timerlist fail
to run under Python3.
o xrange() is replaced by range() in Python3
o bytes and str are different types in Python3
o the return value of Inferior.read_memory() is memoryview object in
Python3
akpm: cc stable so that older kernels are properly debuggable under newer
Python.
Link: https://lkml.kernel.org/r/TYCP286MB2146EE1180A4D5176CBA8AB2C6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 511885d706 ("lib/timerqueue: Rely on rbtree semantics for next
timer") changed struct timerqueue_head, and so print_active_timers()
should be changed accordingly with its way to interpret the structure.
Link: https://lkml.kernel.org/r/TYCP286MB21463BD277330B26DDC18903C6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When we get a random number to generate a flag in the valid range of
UNESCAPE flags, use UNESCAPE_ALL_MASK, It's more correct and prevents from
missed updates of the test coverage in the future if any.
Link: https://lkml.kernel.org/r/20230327142604.48213-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Avoid generating an exception if there are no generic power domain(s)
registered:
(gdb) lx-genpd-summary
domain status children
/device runtime status
----------------------------------------------------------------------
Python Exception <class 'gdb.error'>: No symbol "gpd_list" in current context.
Error occurred in Python: No symbol "gpd_list" in current context.
(gdb) quit
[f.fainelli@gmail.com: correctly invoke gdb_eval_or_none]
Link: https://lkml.kernel.org/r/20230327185746.3856407-1-f.fainelli@gmail.com
Link: https://lkml.kernel.org/r/20230323231659.3319941-1-f.fainelli@gmail.com
Fixes: 8207d4a88e ("scripts/gdb: add lx-genpd-summary command")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Avoid generating an exception if there are no clocks registered:
(gdb) lx-clk-summary
enable prepare protect
clock count count count rate
------------------------------------------------------------------------
Python Exception <class 'gdb.error'>: No symbol "clk_root_list" in
current context.
Error occurred in Python: No symbol "clk_root_list" in current context.
Link: https://lkml.kernel.org/r/20230323225246.3302977-1-f.fainelli@gmail.com
Fixes: d1e9710b63 ("scripts/gdb: initial clk support: lx-clk-summary")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
arch_kexec_kernel_image_load() only calls kexec_image_load_default(), and
there are no arch-specific implementations.
Remove the unnecessary arch_kexec_kernel_image_load() and make
kexec_image_load_default() static.
No functional change intended.
Link: https://lkml.kernel.org/r/20230307224416.907040-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kexec: Remove unnecessary arch hook", v2.
There are no arch-specific things in arch_kexec_kernel_image_load(), so
remove it and just use the generic version.
This patch (of 2):
The x86 implementation of arch_kexec_kernel_image_load() is functionally
identical to the generic arch_kexec_kernel_image_load():
arch_kexec_kernel_image_load # x86
if (!image->fops || !image->fops->load)
return ERR_PTR(-ENOEXEC);
return image->fops->load(image, image->kernel_buf, ...)
arch_kexec_kernel_image_load # generic
kexec_image_load_default
if (!image->fops || !image->fops->load)
return ERR_PTR(-ENOEXEC);
return image->fops->load(image, image->kernel_buf, ...)
Remove the x86-specific version and use the generic
arch_kexec_kernel_image_load(). No functional change intended.
Link: https://lkml.kernel.org/r/20230307224416.907040-1-helgaas@kernel.org
Link: https://lkml.kernel.org/r/20230307224416.907040-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove pci_clear_master to simplify the code, the bus-mastering is also
cleared in do_pci_disable_device, like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Link: https://lkml.kernel.org/r/20230323113711.10523-1-cai.huoqing@linux.dev
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For the sake of cleaning up the kernel.h split the hexadecimal related
helpers to own header called 'hex.h'.
Link: https://lkml.kernel.org/r/20230323155029.40000-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We are observing huge contention on the epmutex during an http
connection/rate test:
83.17% 0.25% nginx [kernel.kallsyms] [k] entry_SYSCALL_64_after_hwframe
[...]
|--66.96%--__fput
|--60.04%--eventpoll_release_file
|--58.41%--__mutex_lock.isra.6
|--56.56%--osq_lock
The application is multi-threaded, creates a new epoll entry for
each incoming connection, and does not delete it before the
connection shutdown - that is, before the connection's fd close().
Many different threads compete frequently for the epmutex lock,
affecting the overall performance.
To reduce the contention this patch introduces explicit reference counting
for the eventpoll struct. Each registered event acquires a reference,
and references are released at ep_remove() time.
The eventpoll struct is released by whoever - among EP file close() and
and the monitored file close() drops its last reference.
Additionally, this introduces a new 'dying' flag to prevent races between
the EP file close() and the monitored file close().
ep_eventpoll_release() marks, under f_lock spinlock, each epitem as dying
before removing it, while EP file close() does not touch dying epitems.
The above is needed as both close operations could run concurrently and
drop the EP reference acquired via the epitem entry. Without the above
flag, the monitored file close() could reach the EP struct via the epitem
list while the epitem is still listed and then try to put it after its
disposal.
An alternative could be avoiding touching the references acquired via
the epitems at EP file close() time, but that could leave the EP struct
alive for potentially unlimited time after EP file close(), with nasty
side effects.
With all the above in place, we can drop the epmutex usage at disposal time.
Overall this produces a significant performance improvement in the
mentioned connection/rate scenario: the mutex operations disappear from
the topmost offenders in the perf report, and the measured connections/rate
grows by ~60%.
To make the change more readable this additionally renames ep_free() to
ep_clear_and_put(), and moves the actual memory cleanup in a separate
ep_free() helper.
Link: https://lkml.kernel.org/r/4a57788dcaf28f5eb4f8dfddcc3a8b172a7357bb.1679504153.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Xiumei Mu <xmu@redhiat.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently there is no way to show the callback names for registered,
unregistered or executed notifiers. This is very useful for debug
purposes, hence add this functionality here in the form of notifiers'
tracepoints, one per operation.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20230314200058.1326909-1-gpiccoli@igalia.com
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Guilherme G. Piccoli <kernel@gpiccoli.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
smatch reports several warnings
kernel/hung_task.c:31:19: warning:
symbol 'sysctl_hung_task_check_count' was not declared. Should it be static?
kernel/hung_task.c:50:29: warning:
symbol 'sysctl_hung_task_check_interval_secs' was not declared. Should it be static?
kernel/hung_task.c:52:19: warning:
symbol 'sysctl_hung_task_warnings' was not declared. Should it be static?
kernel/hung_task.c:75:28: warning:
symbol 'sysctl_hung_task_panic' was not declared. Should it be static?
These variables are only used in hung_task.c, so they should be static
Link: https://lkml.kernel.org/r/20230312164645.471259-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Cc: Ben Dooks <ben.dooks@sifive.com>
Cc: fuyuanli <fuyuanli@didiglobal.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By now, many developers are working on Linux for embedded systems. There
is no need to point out single developers. The linux-embedded mailing
list has only little traffic, and most of it is just spam.
Remove this obsolete section.
Link: https://lkml.kernel.org/r/20230308150625.28732-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Cc: Olivia Mackall <olivia@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit 4104a20646 ("checkpatch: ignore generated CamelCase defines
and enum values") enum values like ETHTOOL_LINK_MODE_Asym_Pause_BIT are
ignored. But there are other enums like
ETHTOOL_LINK_MODE_1000baseT_Full_BIT, which are not ignored because of the
not matching '1000baseT' substring.
Add regex to match all ETHTOOL_LINK_MODE enums.
Link: https://lkml.kernel.org/r/20230104201524.28078-1-gerhard@engleder-embedded.com
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Gerhard Engleder <gerhard@engleder-embedded.com>
Cc: Joe Perches <joe@perches.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This comes out as
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
but we want quotes:
Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
Link: https://lkml.kernel.org/r/202303042034.Cjc7JTd0-lkp@intel.com
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ELF is acronym and therefore should be spelled in all caps.
I left one exception at Documentation/arm/nwfpe/nwfpe.rst which looks like
being written in the first person.
Link: https://lkml.kernel.org/r/Y/3wGWQviIOkyLJW@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
gcc inlines kstrdup into kstrdup_const() but it can very efficiently tail
call into it instead:
$ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-84 (-84)
Function old new delta
kstrdup_const 119 35 -84
Link: https://lkml.kernel.org/r/Y/4fDlbIhTLNLFHz@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A running x86 UML kernel reports with architecture "i386:x86-64" as it is
a sub-architecture. However, a difference with bare-metal x86 kernels is
in how it manages tasks and the current task struct. To identify that the
inferior is a UML kernel and not bare-metal, check for the existence of
the UML specific symbol "cpu_tasks" which contains the current task
struct.
Link: https://lkml.kernel.org/r/b839d611e2906ccef2725c34d8e353fab35fe75e.1677469905.git.development@efficientek.com
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Anton Ivanov <anton.ivanov@kot-begemot.co.uk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "scripts/gdb: Support getting current task struct in UML",
v3.
A running x86 UML kernel reports with architecture "i386:x86-64" as it is
a sub-architecture. However, a difference with bare-metal x86 kernels is
in how it manages tasks and the current task struct. To identify that the
inferior is a UML kernel and not bare-metal, check for the existence of
the UML specific symbol "cpu_tasks" which contains the current task
struct.
This patch (of 3):
There is an extra space in a couple blocks in get_current_task. Though
python does not care, let's make the spacing consistent. Also, format
better an if expression, removing unneeded parenthesis.
Link: https://lkml.kernel.org/r/cover.1677469905.git.development@efficientek.com
Link: https://lkml.kernel.org/r/2e117b82240de6893f27cb6507242ce455ed7b5b.1677469905.git.development@efficientek.com
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Anton Ivanov <anton.ivanov@kot-begemot.co.uk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's more readable to just pass NULL directly instead of using a variable
for that.
Link: https://lkml.kernel.org/r/Y/yAlDytLH0ZNLNz@kili
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove empty if statement from nfs3_prepare_get_acl and update comment to
follow the one from the referred fs/posix_acl.c:get_acl().
No functional change intended.
Link: https://lkml.kernel.org/r/20221130151231.3654-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
procfs' .setattr() has updated i_uid, i_gid and i_mode into proc dirent,
we don't need to call mark_inode_dirty() for delayed update, remove it.
Link: https://lkml.kernel.org/r/20230131150840.34726-1-chao@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When CONFIG_PROC_FS is not set, proc_salinfo_show() is not used. Mark the
function as __maybe_unused to quieten the warning message.
../arch/ia64/kernel/salinfo.c:584:12: warning: 'proc_salinfo_show' defined but not used [-Wunused-function]
584 | static int proc_salinfo_show(struct seq_file *m, void *v)
| ^~~~~~~~~~~~~~~~~
Link: https://lkml.kernel.org/r/20230223034309.13375-1-rdunlap@infradead.org
Fixes: 3f3942aca6 ("proc: introduce proc_create_single{,_data}")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alloc_per_cpu_data() is called by find_memory(), which is marked as
__init. Therefore alloc_per_cpu_data() can also be marked as __init to
remedy this modpost problem.
WARNING: modpost: vmlinux.o: section mismatch in reference: alloc_per_cpu_data (section: .text) -> memblock_alloc_try_nid (section: .init.text)
Link: https://lkml.kernel.org/r/20230223034258.12917-1-rdunlap@infradead.org
Fixes: 4b9ddc7cf2 ("[IA64] Fix section mismatch in contig.c version of per_cpu_init()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Improve the average delay precision of getdelay tool to microsecond. When
using the getdelay tool, it is sometimes found that the average delay
except CPU is not 0, but display is 0, because the precison is too low.
For example, see delay average of SWAP below when using ZRAM.
print delayacct stats ON
PID 32915
CPU count real total virtual total delay total delay average
339202 2793871936 9233585504 7951112 0.000ms
IO count delay total delay average
41 419296904 10ms
SWAP count delay total delay average
242589 1045792384 0ms
This wrong display is misleading, so improve the millisecond precision of
the average delay to microsecond just like CPU. Then user would get more
accurate information of delay time.
Link: https://lkml.kernel.org/r/202302131408087983857@zte.com.cn
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- fix irq handling in gpio-davinci
- fix Kconfig dependencies for gpio-regmap
-----BEGIN PGP SIGNATURE-----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=ZM6C
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix irq handling in gpio-davinci
- fix Kconfig dependencies for gpio-regmap
* tag 'gpio-fixes-for-v6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: davinci: Add irq chip flag to skip set wake
gpio: davinci: Do not clear the bank intr enable bit in save_context
gpio: GPIO_REGMAP: select REGMAP instead of depending on it
Fix the ACPI backlight override mechanism for the cases when
acpi_backlight=video is set through the kernel command line or a DMI
quirk and add backlight quirks for Apple iMac14,1 and iMac14,2 and
Lenovo ThinkPad W530 (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=NpWd
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Fix the ACPI backlight override mechanism for the cases when
acpi_backlight=video is set through the kernel command line or a DMI
quirk and add backlight quirks for Apple iMac14,1 and iMac14,2 and
Lenovo ThinkPad W530 (Hans de Goede)"
* tag 'acpi-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530
ACPI: video: Add acpi_backlight=video quirk for Apple iMac14,1 and iMac14,2
ACPI: video: Make acpi_backlight=video work independent from GPU driver
ACPI: video: Add auto_detect arg to __acpi_video_get_backlight_type()
-----BEGIN PGP SIGNATURE-----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=xypJ
-----END PGP SIGNATURE-----
Merge tag '6.3-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
"Four fixes, three for stable:
- slab out of bounds fix
- lock cancellation fix
- minor cleanup to address clang warning
- fix for xfstest 551 (wrong parms passed to kvmalloc)"
* tag '6.3-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr
ksmbd: delete asynchronous work from list
ksmbd: remove unused is_char_allowed function
ksmbd: do not call kvmalloc() with __GFP_NORETRY | __GFP_NO_WARN
Current release - regressions:
- wifi: mac80211:
- fix potential null pointer dereference
- fix receiving mesh packets in forwarding=0 networks
- fix mesh forwarding
Current release - new code bugs:
- virtio/vsock: fix leaks due to missing skb owner
Previous releases - regressions:
- raw: fix NULL deref in raw_get_next().
- sctp: check send stream number after wait_for_sndbuf
- qrtr:
- fix a refcount bug in qrtr_recvmsg()
- do not do DEL_SERVER broadcast after DEL_CLIENT
- wifi: brcmfmac: fix SDIO suspend/resume regression
- wifi: mt76: fix use-after-free in fw features query.
- can: fix race between isotp_sendsmg() and isotp_release()
- eth: mtk_eth_soc: fix remaining throughput regression
-eth: ice: reset FDIR counter in FDIR init stage
Previous releases - always broken:
- core: don't let netpoll invoke NAPI if in xmit context
- icmp: guard against too small mtu
- ipv6: fix an uninit variable access bug in __ip6_make_skb()
- wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap()
- can: fix poll() to not report false EPOLLOUT events
- eth: gve: secure enough bytes in the first TX desc for all TCP pkts
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=1AWK
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and can.
Current release - regressions:
- wifi: mac80211:
- fix potential null pointer dereference
- fix receiving mesh packets in forwarding=0 networks
- fix mesh forwarding
Current release - new code bugs:
- virtio/vsock: fix leaks due to missing skb owner
Previous releases - regressions:
- raw: fix NULL deref in raw_get_next().
- sctp: check send stream number after wait_for_sndbuf
- qrtr:
- fix a refcount bug in qrtr_recvmsg()
- do not do DEL_SERVER broadcast after DEL_CLIENT
- wifi: brcmfmac: fix SDIO suspend/resume regression
- wifi: mt76: fix use-after-free in fw features query.
- can: fix race between isotp_sendsmg() and isotp_release()
- eth: mtk_eth_soc: fix remaining throughput regression
- eth: ice: reset FDIR counter in FDIR init stage
Previous releases - always broken:
- core: don't let netpoll invoke NAPI if in xmit context
- icmp: guard against too small mtu
- ipv6: fix an uninit variable access bug in __ip6_make_skb()
- wifi: mac80211: fix the size calculation of
ieee80211_ie_len_eht_cap()
- can: fix poll() to not report false EPOLLOUT events
- eth: gve: secure enough bytes in the first TX desc for all TCP
pkts"
* tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: stmmac: check fwnode for phy device before scanning for phy
net: stmmac: Add queue reset into stmmac_xdp_open() function
selftests: net: rps_default_mask.sh: delete veth link specifically
net: fec: make use of MDIO C45 quirk
can: isotp: fix race between isotp_sendsmg() and isotp_release()
can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
gve: Secure enough bytes in the first TX desc for all TCP pkts
netlink: annotate lockless accesses to nlk->max_recvmsg_len
ethtool: reset #lanes when lanes is omitted
ping: Fix potentail NULL deref for /proc/net/icmp.
raw: Fix NULL deref in raw_get_next().
ice: Reset FDIR counter in FDIR init stage
ice: fix wrong fallback logic for FDIR
net: stmmac: fix up RX flow hash indirection table when setting channels
net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe
wifi: mt76: ignore key disable commands
wifi: ath11k: reduce the MHI timeout to 20s
ipv6: Fix an uninit variable access bug in __ip6_make_skb()
...
This Kselftest fixes update for Linux 6.3-rc6 consists of one single
fix to mount_setattr_test build failure.
-----BEGIN PGP SIGNATURE-----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=oGdA
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"One single fix to mount_setattr_test build failure"
* tag 'linux-kselftest-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests mount: Fix mount_setattr_test builds failed
Three bugs found by syzkaller:
- An invalid VA range can be be put in a pages and eventually trigger
WARN_ON, reject it early
- Use of the wrong start index value when doing the complex batch carry
scheme
- Wrong store ordering resulting in corrupting data used in a later
calculation that corrupted the batch structure during carry
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZC7G7AAKCRCFwuHvBreF
YQsjAQDiA56UTfVHwuMWEdZJ7clHbOeZk7xWMLTewVNBxktxhwD/fUVRqeC9uZKT
TAWvcHUN4f6dzzfBecKLZaSHrft5lws=
=u8cW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- An invalid VA range can be be put in a pages and eventually trigger
WARN_ON, reject it early
- Use of the wrong start index value when doing the complex batch carry
scheme
- Wrong store ordering resulting in corrupting data used in a later
calculation that corrupted the batch structure during carry
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not corrupt the pfn list when doing batch carry
iommufd: Fix unpinning of pages when an access is present
iommufd: Check for uptr overflow
These are some fixes to make sure the PWM state structure is always
initialized to a known state. Prior to this it could happen in some
situations that random data from the stack would leak into the data
structure and cause subtle bugs.
-----BEGIN PGP SIGNATURE-----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=w7D4
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"These are some fixes to make sure the PWM state structure is always
initialized to a known state.
Prior to this it could happen in some situations that random data from
the stack would leak into the data structure and cause subtle bugs"
* tag 'pwm/for-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Zero-initialize the pwm_state passed to driver's .get_state()
pwm: meson: Explicitly set .polarity in .get_state()
pwm: sprd: Explicitly set .polarity in .get_state()
pwm: iqs620a: Explicitly set .polarity in .get_state()
pwm: cros-ec: Explicitly set .polarity in .get_state()
pwm: hibvt: Explicitly set .polarity in .get_state()
Mostly i915 fixes: dp mst for compression/dsc, perf ioctl uaf, ctx rpm
accounting, gt reset vs huc loading.
And a few individual driver fixes: ivpu dma fence&suspend, panfrost
mmap, nouveau color depth
-----BEGIN PGP SIGNATURE-----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=kCTh
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Mostly i915 fixes: dp mst for compression/dsc, perf ioctl uaf, ctx rpm
accounting, gt reset vs huc loading.
And a few individual driver fixes: ivpu dma fence&suspend, panfrost
mmap, nouveau color depth"
* tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm:
accel/ivpu: Fix S3 system suspend when not idle
accel/ivpu: Add dma fence to command buffers only
drm/i915: Fix context runtime accounting
drm/i915: fix race condition UAF in i915_perf_add_config_ioctl
drm/i915: Use compressed bpp when calculating m/n value for DP MST DSC
drm/i915/huc: Cancel HuC delayed load timer on reset.
drm/i915/ttm: fix sparse warning
drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error path
drm/nouveau/disp: Support more modes by checking with lower bpc
The majority of changes here are various fixes for Intel drivers,
while there is a change in ASoC PCM core for the format constraints.
In addition, a workaround for HD-audio HDMI regressions and usual
HD-audio quirks are found.
-----BEGIN PGP SIGNATURE-----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=ryKW
-----END PGP SIGNATURE-----
Merge tag 'sound-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are various fixes for Intel drivers,
and there is a change in ASoC PCM core for the format constraints.
In addition, a workaround for HD-audio HDMI regressions and usual
HD-audio quirks are found"
* tag 'sound-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Preserve the previous PCM device upon re-enablement
ALSA: hda/realtek: Add quirk for Clevo X370SNW
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
ASoC: SOF: avoid a NULL dereference with unsupported widgets
ASoC: da7213.c: add missing pm_runtime_disable()
ASoC: hdac_hdmi: use set_stream() instead of set_tdm_slots()
ASoC: codecs: lpass: fix the order or clks turn off during suspend
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750
ASoC: SOF: ipc4: Ensure DSP is in D0I0 during sof_ipc4_set_get_data()
ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)
ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm
ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15
ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15
Highlights:
- more think-lmi fixes
- 1 DMI quirk addition
The following is an automated git shortlog grouped by driver:
think-lmi:
- Clean up display of current_value on Thinkstation
- Fix memory leaks when parsing ThinkStation WMI strings
- Fix memory leak when showing current settings
thinkpad_acpi:
- Add missing T14s Gen1 type to s2idle quirk list
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmQulJoUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yDLAgAh4ES4m+fdH41qnzmceISk2b+wZhh
z8SACLiTuitAPnUNAYs8yoR/tMYsuRZ7+6zJEaRZjKKjivFPYAamiTcjjprPMx51
b47hzKUXa45NI1WfN3qIcmjHXSb3HzkEstdGBERYExgQrxoMSkJ3RHm2No32iJjP
XO136iqheD/suPzFIdcdi3WR+ktCdNuqfHFYcO4SizPPfYr+3fa4TeJIF4E1sMeh
f/Kx57apsijp5dIlpntNedcAaSWppuaW4WM71hEdZDaEae+m1bcSXq2XZnJ14LZY
/t1CcWxJFqBIyod/hEJERBxi+51Lx9quaSp6JTdmZd0TkHn1ksvnZ9phkQ==
=PE0w
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- more think-lmi fixes
- one DMI quirk addition
* tag 'platform-drivers-x86-v6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle quirk list
platform/x86: think-lmi: Clean up display of current_value on Thinkstation
platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI strings
platform/x86: think-lmi: Fix memory leak when showing current settings
These are minor fixes to address false-positive build warnings:
Some of the less common I/O accessors are missing __force casts and
cause sparse warnings for their implied byteswap, and a recent change
to __generic_cmpxchg_local() causes a warning about constant integer
truncation.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmQufaMACgkQmmx57+YA
GNmuyA//WBjgOgXPNA7kV3/UcScoW1MEq4Ri8NKJANKyOHWYa1TxIwrHehJkE2Zm
B0Pr+DmRv3tYav/eytmXm8KMAGdqjVllHdBM4fe2HDjJspvqNKOEX/Z2UMzvNbLN
uWQneHxFxHK8eZHT+wO4U3062heuBYQ0QQOK0Mk4OaWwsvWz0JVn6dC6uo8z0C4l
20HAwkyQriB4GaFuEE9iVFYbUfjWGdTdRv9hbL8QpQKMGn+gsG9CgXDNgK+LJ/70
Q7oJ8qvocjkKAxnbxtXzpb4iKLcnf1VDvwKmCFtvT6GEE/n4Rd00RIF+LKm6J+mC
vLqAfaDu88mXP/JVRDz/Rpv/lNjGWMd+mR/Y9Rr8jmkA1imJXUKr9cRttJgsDcsT
8KxJdejakLvHzZKIjdjoE4aOwr5HPcPNi3Kge6DVnmW4r88Ma+lz+aOQueheBsA3
4mSSNi+c95AWSp0TznUR944RVKlqJ9FwNsXE6BskthhOBTG/4kOsU5nR1z6P6JlP
De8i5Dd76oYGOXUxf8CAPcqTDligXkx8BBEA+AuLbUyimUBgvFWPqgiBvmLHftrK
jR2mKjUznkC6A/WzHwUq/uwVz76qjor4aHo+WbvlhAJSSqYPlvZcdbOPU/O+hHhK
obEhGHH+iKeGaRAd/Rv8fFHIjzq5hzriB8ls2uRiHe50FL/v10s=
=UzVO
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are minor fixes to address false-positive build warnings:
Some of the less common I/O accessors are missing __force casts and
cause sparse warnings for their implied byteswap, and a recent change
to __generic_cmpxchg_local() causes a warning about constant integer
truncation"
* tag 'asm-generic-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: avoid __generic_cmpxchg_local warnings
asm-generic/io.h: suppress endianness warnings for relaxed accessors
asm-generic/io.h: suppress endianness warnings for readq() and writeq()
Some DT devices already have phy device configured in the DT/ACPI.
Current implementation scans for a phy unconditionally even though
there is a phy listed in the DT/ACPI and already attached.
We should check the fwnode if there is any phy device listed in
fwnode and decide whether to scan for a phy to attach to.
Fixes: fe2cfbc968 ("net: stmmac: check if MAC needs to attach to a PHY")
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/lkml/20230403212434.296975-1-martin.blumenstingl@googlemail.com/
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shahab Vahedi <shahab@synopsys.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Link: https://lore.kernel.org/r/20230406024541.3556305-1-michael.wei.hong.sit@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Queue reset was moved out from __init_dma_rx_desc_rings() and
__init_dma_tx_desc_rings() functions. Thus, the driver fails to transmit
and receive packet after XDP prog setup.
This commit adds the missing queue reset into stmmac_xdp_open() function.
Fixes: f9ec5723c3 ("net: ethernet: stmicro: stmmac: move queue reset to dedicated functions")
Cc: <stable@vger.kernel.org> # 6.0+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230404044823.3226144-1-yoong.siang.song@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When deleting the netns and recreating a new one while re-adding the
veth interface, there is a small window of time during which the old
veth interface has not yet been removed. This can cause the new addition
to fail. To resolve this issue, we can either wait for a short while to
ensure that the old veth interface is deleted, or we can specifically
remove the veth interface.
Before this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
RTNETLINK answers: File exists
changing rps_default_mask in child ns don't affect the main one[ ok ]
cat: /sys/class/net/vethC11an1/queues/rx-0/rps_cpus: No such file or directory
changing rps_default_mask in child ns affects new childns devices./rps_default_mask.sh: line 36: [: -eq: unary operator expected
[fail] expected 1 found
changing rps_default_mask in child ns don't affect existing devices[ ok ]
After this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
changing rps_default_mask in child ns don't affect the main one[ ok ]
changing rps_default_mask in child ns affects new childns devices[ ok ]
changing rps_default_mask in child ns don't affect existing devices[ ok ]
Fixes: 3a7d84eae0 ("self-tests: more rps self tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20230404072411.879476-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not all fec MDIO bus drivers support C45 mode transactions. The older fec
hardware block in many ColdFire SoCs does not appear to support them, at
least according to most of the different ColdFire SoC reference manuals.
The bits used to generate C45 access on the iMX parts, in the OP field
of the MMFR register, are documented as generating non-compliant MII
frames (it is not documented as to exactly how they are non-compliant).
Commit 8d03ad1ab0 ("net: fec: Separate C22 and C45 transactions")
means the fec driver will always register c45 MDIO read and write
methods. During probe these will always be accessed now generating
non-compliant MII accesses on ColdFire based devices.
Add a quirk define, FEC_QUIRK_HAS_MDIO_C45, that can be used to
distinguish silicon that supports MDIO C45 framing or not. Add this to
all the existing iMX quirks, so they will be behave as they do now (*).
(*) it seems that some iMX parts may not support C45 transactions either.
The iMX25 and iMX50 Reference Manuals contain similar wording to
the ColdFire Reference Manuals on this.
Fixes: 8d03ad1ab0 ("net: fec: Separate C22 and C45 transactions")
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230404052207.3064861-1-gerg@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
