kasan will report a BUG when run command 'insmod hns_roce_hw_v2.ko', the
calltrace is as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in hns_roce_v2_init_eq_table+0x1324/0x1948
[hns_roce_hw_v2]
Read of size 8 at addr ffff8020e7a10608 by task insmod/256
CPU: 0 PID: 256 Comm: insmod Tainted: G O 5.2.0-rc4 #1
Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xc4/0xfc
print_address_description+0x60/0x270
__kasan_report+0x164/0x1b8
kasan_report+0xc/0x18
__asan_load8+0x84/0xa8
hns_roce_v2_init_eq_table+0x1324/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Allocated by task 256:
__kasan_kmalloc.isra.0+0xd0/0x180
kasan_kmalloc+0xc/0x18
__kmalloc+0x16c/0x328
hns_roce_v2_init_eq_table+0x764/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff8020e7a10600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffff8020e7a10600, ffff8020e7a10680)
The buggy address belongs to the page:
page:ffff7fe00839e840 refcount:1 mapcount:0 mapping:ffff802340020200 index:0x0
flags: 0x5fffe00000000200(slab)
raw: 5fffe00000000200 dead000000000100 dead000000000200 ffff802340020200
raw: 0000000000000000 0000000081000100 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8020e7a10500: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
ffff8020e7a10580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8020e7a10600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff8020e7a10680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8020e7a10700: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-7-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
kasan will report a BUG when run command 'rmmod hns_roce_hw_v2', the calltrace
is as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in hns_roce_table_mhop_put+0x584/0x828
[hns_roce]
Read of size 8 at addr ffff802185e08300 by task rmmod/270
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xc4/0xfc
print_address_description+0x60/0x270
__kasan_report+0x164/0x1b8
kasan_report+0xc/0x18
__asan_load8+0x84/0xa8
hns_roce_table_mhop_put+0x584/0x828 [hns_roce]
hns_roce_table_put+0x174/0x1a0 [hns_roce]
hns_roce_mr_free+0x124/0x210 [hns_roce]
hns_roce_dereg_mr+0x90/0xb8 [hns_roce]
ib_dealloc_pd_user+0x60/0xf0
ib_mad_port_close+0x128/0x1d8
ib_mad_remove_device+0x94/0x118
remove_client_context+0xa0/0xe0
disable_device+0xfc/0x1c0
__ib_unregister_device+0x60/0xe0
ib_unregister_device+0x24/0x38
hns_roce_exit+0x3c/0x138 [hns_roce]
__hns_roce_hw_v2_uninit_instance.isra.30+0x28/0x50 [hns_roce_hw_v2]
hns_roce_hw_v2_uninit_instance+0x44/0x60 [hns_roce_hw_v2]
hclge_uninit_client_instance+0x15c/0x238 [hclge]
hnae3_uninit_client_instance+0x84/0xa8 [hnae3]
hnae3_unregister_client+0x84/0x158 [hnae3]
hns_roce_hw_v2_exit+0x14/0x20 [hns_roce_hw_v2]
__arm64_sys_delete_module+0x20c/0x308
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Allocated by task 255:
__kasan_kmalloc.isra.0+0xd0/0x180
kasan_kmalloc+0xc/0x18
__kmalloc+0x16c/0x328
hns_roce_init_hem_table+0x20c/0x428 [hns_roce]
hns_roce_init+0x214/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
0xffff200009c00014
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff802185e06300
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 0 bytes to the right of
8192-byte region [ffff802185e06300, ffff802185e08300)
The buggy address belongs to the page:
page:ffff7fe008617800 refcount:1 mapcount:0 mapping:ffff802340020e00 index:0x0
compound_mapcount: 0
flags: 0x5fffe00000010200(slab|head)
raw: 5fffe00000010200 dead000000000100 dead000000000200 ffff802340020e00
raw: 0000000000000000 00000000803e003e 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff802185e08200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff802185e08280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff802185e08300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff802185e08380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff802185e08400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Disabling lock debugging due to kernel taint
Fixes: a25d13cbe8 ("RDMA/hns: Add the interfaces to support multi hop addressing for the contexts in hip08")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-6-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When exiting "for loop", the actual value of pi will be
increased by 1, which is compatible with the next calculation.
But when pi is equal to "ci + hr_cq-> ib_cq.cqe", the "break"
was called and the pi is actual value, it will lead one cqe
still existing, so the "==" should be modify to ">".
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-5-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When create a qp and attached to srq, rq will no longer be used
and the members of rq will be set zero. As a result, the wrid
of rq will not be allocated and used.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-3-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
We should set IB_WC_WITH_VLAN only when VLAN is enabled.
In addition, move setting of IB_WC_WITH_SMAC below
setting of wc->smac.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1565343666-73193-2-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
NULL-ing notifier_call is performed under protection
of mlx5_ib_multiport_mutex lock. Such protection is
not easily spotted and better to be guarded by lockdep
annotation.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190813102814.22350-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add two events that were defined in the device specification but were
not exposed in the driver list.
Post this patch those events can be read over the DEVX events interface
once be reported by the firmware.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Edward Srouji <edwards@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190808084358.29517-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merging tip of mlx5-next in order to get changes related to adding
XRQ support to the DEVX interface needed prior to the following two
patches.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add XRQ legacy commands opcodes, will be used via the DEVX interface.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
As QP may be created by DEVX, it may be valid to not find the rsn in
mlx5 core tree, change the level to be debug.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
If we enabled alw_lcl_lpbk in promiscuous mode, packet whose source
and destination mac address is equal will be handled in both inner
loopback and outer loopback. This will halve performance of roce in
promiscuous mode.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1565276034-97329-14-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Current prompt message is uncorrect when destroying qp, add qpn
information when creating qp.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-4-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
It needs to check the sq size with integrity when configures
the relatived parameters of sq. Here moves the relatived code
into a special function.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-2-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Now that we have a common iWARP query port function we can remove the
common code from the iWARP drivers.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20190807103138.17219-5-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support for a common iWARP query port function, the new function
includes a common code that is used by the iWARP devices to update the
port attributes like max_mtu, active_mtu, state, and phys_state, the
function also includes a call for the driver-specific query_port callback
to query the device-specific port attributes.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Link: https://lore.kernel.org/r/20190807103138.17219-4-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
This change is required to associate the cxgb3 ib_dev with the
underlying net_device, so in the upcoming patch we can call
ib_device_get_netdev().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Link: https://lore.kernel.org/r/20190807103138.17219-3-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Andrew Boyer <aboyer@tobark.org>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Reference counters are preferred to use refcount_t instead of
atomic_t.
This is because the implementation of refcount_t can prevent
overflows and detect possible use-after-free.
So convert atomic_t ref counters to refcount_t.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There is a self assignment of esw->dev to itself, clean this up by
removing it. Also make dev a const pointer.
Addresses-Coverity: ("Self assignment")
Fixes: 6cedde4513 ("net/mlx5: E-Switch, Verify support QoS element type")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Admin queue error prints should never happen unless something wrong
happened to the device. However, in the unfortunate case that it does,
we should take extra care not to flood the log with error messages.
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Link: https://lore.kernel.org/r/20190801171447.54440-3-galpress@amazon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
UAR in CQ is not used and generates the following compilation
warning, clean the code by removing uar assignment.
drivers/infiniband/hw/hns/hns_roce_cq.c: In function _create_user_cq_:
drivers/infiniband/hw/hns/hns_roce_cq.c:305:27: warning: parameter _uar_ set but not used [-Wunused-but-set-parameter]
305 | struct hns_roce_uar *uar,
| ~~~~~~~~~~~~~~~~~~~~~^~~
Fixes: 4f8f0d5e33 ("RDMA/hns: Package the flow of creating cq")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801114827.24263-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Send and Receive completion is handled on a single CPU selected at
the time each Completion Queue is allocated. Typically this is when
an initiator instantiates an RDMA transport, or when a target
accepts an RDMA connection.
Some ULPs cannot open a connection per CPU to spread completion
workload across available CPUs and MSI vectors. For such ULPs,
provide an API that allows the RDMA core to select a completion
vector based on the device's complement of available comp_vecs.
ULPs that invoke ib_alloc_cq() with only comp_vector 0 are converted
to use the new API so that their completion workloads interfere less
with each other.
Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Cc: <linux-cifs@vger.kernel.org>
Cc: <v9fs-developer@lists.sourceforge.net>
Link: https://lore.kernel.org/r/20190729171923.13428.52555.stgit@manet.1015granger.net
Signed-off-by: Doug Ledford <dledford@redhat.com>
The "MLX5_CMD_OP_QUERY_LAG" is one of the DEVX general commands, add it.
Fixes: 8aa8c95ce4 ("IB/mlx5: Add support for DEVX general command")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Remove the "reserved_at_40" field to match the device specification.
Fixes: 84df61ebc6 ("net/mlx5: Add HW interfaces used by LAG")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The line continuations unintentionally add whitespace so
instead use coalesced formats to remove the whitespace.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/f14db3287b23ed8af9bdbf8001e2e2fe7ae9e43a.camel@perches.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently for PF and ECPF vports, representors are created before
their eswitch hardware ports are initialized in below flow.
mlx5_eswitch_enable()
esw_offloads_init()
esw_offloads_load_all_reps()
[..]
esw_enable_vport()
However for VFs, vports are initialized before creating their
respective netdev represnetors in event handling context.
Similarly while disabling eswitch, first hardware vports are disabled,
followed by destroying their representors.
Here while underlying vports gets destroyed but its respective user
facing netdevice can still exist on which user can continue to perform
more offload operations.
Instead, its more accurate to do
enable_eswitch switchdev mode:
1. perform FDB tables initialization
2. initialize hw vport
3. create and publish representor for this vport
disable_eswitch switchdev mode:
1. destroy user facing representor for the vport
2. disable hw vport
3. perform FDB tables cleanup
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mc_promisc pointer points to an instance of struct esw_mc_addr allocated
as part of the esw structure.
Hence it cannot be NULL.
Removed such redundant check and assign where it is actually used.
While at it, add comment around legacy mode fields and move mc_promisc
close to other legacy mode structures to improve code redability.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
We don't need to handle error flow of esw_create_legacy_table() in the
same branch, it is already being handled directly after the if statement,
for both legacy and switchdev modes in one place.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
vports needs to be enabled in switchdev and legacy mode.
In switchdev mode, vports should be enabled after initializing
the FDB tables and before creating their represntors so that
representor works on an initialized vport object.
Prepare a helper function which can be called when enabling either of
the eswitch modes.
Similarly, have disable vports helper function.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
First enable TSAR Qos hardware block in device before enabling its
user vports.
This refactor is needed so that vports can be enabled before their
representor netdevice can be created.
While at it, esw_create_tsar() returns error code which was used only to
print error. However esw_create_tsar() already prints warning if it hits
an error.
Hence, remove the redundant warning.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Except bit toggling code, rest of the code is same to enable/disable
metadata passing functionality.
Hence, combine them to single function and control using enable flag.
Also instead of checking metadata supported at multiple places,
fold into the helper function.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Check if firmware supports the requested element type before
attempting to create the element type.
In addition, explicitly specify the request element type and tsar type.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently mlx5_load_one() perform device registration using
mlx5_register_device(). But mlx5_unload_one() doesn't unregister.
Make them symmetric by doing device unregistration in
mlx5_unload_one().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
