commit 3eb2a8b235 upstream.
In the current code, if multiple hardware breakpoints/watchpoints in
a user-space thread, some of them will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
printf("start test\n");
a = 1;
printf("a = %d\n", a);
printf("end test\n");
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
...
The first hardware watchpoint is not triggered, the root causes are:
1. In hw_breakpoint_control(), The FWPnCFG1.2.4/MWPnCFG1.2.4 register
settings are not distinguished. They should be set based on hardware
watchpoint functions (fetch or load/store operations).
2. In breakpoint_handler() and watchpoint_handler(), it doesn't identify
which watchpoint is triggered. So, all watchpoint-related perf_event
callbacks are called and siginfo is sent to the user space. This will
cause user-space unable to determine which watchpoint is triggered.
The kernel need to identity which watchpoint is triggered via MWPS/
FWPS registers, and then call the corresponding perf event callbacks
to report siginfo to the user-space.
Modify the relevant code to solve above issues.
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
Hardware watchpoint 2: a
Old value = 0
New value = 1
main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
(gdb) c
Continuing.
end test
[Inferior 1 (process 778) exited normally]
Cc: stable@vger.kernel.org
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8e57ab099 upstream.
In the current code, gdb can set the watchpoint successfully through
ptrace interface, but watchpoint will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
a = 1;
printf("a = %d\n", a);
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) watch a
...
(gdb) r
...
a = 1
[Inferior 1 (process 4650) exited normally]
No watchpoints were triggered, the root causes are:
1. Kernel uses perf_event and hw_breakpoint framework to control
watchpoint, but the perf_event corresponding to watchpoint is
not enabled. So it needs to be enabled according to MWPnCFG3
or FWPnCFG3 PLV bit field in ptrace_hbp_set_ctrl(), and privilege
is set according to the monitored addr in hw_breakpoint_control().
Furthermore, add a judgment in ptrace_hbp_set_addr() to ensure
kernel-space addr cannot be monitored in user mode.
2. The global enable control for all watchpoints is the WE bit of
CSR.CRMD, and hardware sets the value to 0 when an exception is
triggered. When the ERTN instruction is executed to return, the
hardware restores the value of the PWE field of CSR.PRMD here.
So, before a thread containing watchpoints be scheduled, the PWE
field of CSR.PRMD needs to be set to 1. Add this modification in
hw_breakpoint_control().
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpointshttps://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#basic-control-and-status-registers
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) watch a
Hardware watchpoint 1: a
(gdb) r
...
Hardware watchpoint 1: a
Old value = 0
New value = 1
main () at test.c:6
6 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
[Inferior 1 (process 775) exited normally]
Cc: stable@vger.kernel.org
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f63a47b34b upstream.
In the current code, when debugging the following code using gdb,
"invalid argument ..." message will be displayed.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
a = 1;
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) watch a
Hardware watchpoint 1: a
(gdb) r
...
Invalid argument setting hardware debug registers
There are mainly two types of issues.
1. Some incorrect judgment condition existed in user_watch_state
argument parsing, causing -EINVAL to be returned.
When setting up a watchpoint, gdb uses the ptrace interface,
ptrace(PTRACE_SETREGSET, tid, NT_LOONGARCH_HW_WATCH, (void *) &iov)).
Register values in user_watch_state as follows:
addr[0] = 0x0, mask[0] = 0x0, ctrl[0] = 0x0
addr[1] = 0x0, mask[1] = 0x0, ctrl[1] = 0x0
addr[2] = 0x0, mask[2] = 0x0, ctrl[2] = 0x0
addr[3] = 0x0, mask[3] = 0x0, ctrl[3] = 0x0
addr[4] = 0x0, mask[4] = 0x0, ctrl[4] = 0x0
addr[5] = 0x0, mask[5] = 0x0, ctrl[5] = 0x0
addr[6] = 0x0, mask[6] = 0x0, ctrl[6] = 0x0
addr[7] = 0x12000803c, mask[7] = 0x0, ctrl[7] = 0x610
In arch_bp_generic_fields(), return -EINVAL when ctrl.len is
LOONGARCH_BREAKPOINT_LEN_8(0b00). So delete the incorrect judgment here.
In ptrace_hbp_fill_attr_ctrl(), when note_type is NT_LOONGARCH_HW_WATCH
and ctrl[0] == 0x0, if ((type & HW_BREAKPOINT_RW) != type) will return
-EINVAL. Here ctrl.type should be set based on note_type, and unnecessary
judgments can be removed.
2. The watchpoint argument was not set correctly due to unnecessary
offset and alignment_mask.
Modify ptrace_hbp_fill_attr_ctrl() and hw_breakpoint_arch_parse(), which
ensure the watchpont argument is set correctly.
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
Cc: stable@vger.kernel.org
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8bf0287528 upstream.
enable_gcm_256 (which allows the server to require the strongest
encryption) is enabled by default, but the modinfo description
incorrectly showed it disabled by default. Fix the typo.
Cc: stable@vger.kernel.org
Fixes: fee742b502 ("smb3.1.1: enable negotiating stronger encryption by default")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 135c6eb27a upstream.
Under the conditions that a device is to be reinitialized within
ufshcd_probe_hba(), the device must first be fully reset.
Resetting the device should include freeing U8 model (member of dev_info)
but does not, and this causes a memory leak. ufs_put_device_desc() is
responsible for freeing model.
unreferenced object 0xffff3f63008bee60 (size 32):
comm "kworker/u33:1", pid 60, jiffies 4294892642
hex dump (first 32 bytes):
54 48 47 4a 46 47 54 30 54 32 35 42 41 5a 5a 41 THGJFGT0T25BAZZA
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc ed7ff1a9):
[<ffffb86705f1243c>] kmemleak_alloc+0x34/0x40
[<ffffb8670511cee4>] __kmalloc_noprof+0x1e4/0x2fc
[<ffffb86705c247fc>] ufshcd_read_string_desc+0x94/0x190
[<ffffb86705c26854>] ufshcd_device_init+0x480/0xdf8
[<ffffb86705c27b68>] ufshcd_probe_hba+0x3c/0x404
[<ffffb86705c29264>] ufshcd_async_scan+0x40/0x370
[<ffffb86704f43e9c>] async_run_entry_fn+0x34/0xe0
[<ffffb86704f34638>] process_one_work+0x154/0x298
[<ffffb86704f34a74>] worker_thread+0x2f8/0x408
[<ffffb86704f3cfa4>] kthread+0x114/0x118
[<ffffb86704e955a0>] ret_from_fork+0x10/0x20
Fixes: 96a7141da3 ("scsi: ufs: core: Add support for reinitializing the UFS device")
Cc: <stable@vger.kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Joel Slebodnick <jslebodn@redhat.com>
Link: https://lore.kernel.org/r/20240613200202.2524194-1-jslebodn@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4eb4e85c4f upstream.
If inc_block_group_ro systematically fails (e.g. due to ETXTBUSY from
swap) or btrfs_relocate_chunk systematically fails (from lack of
space), then this worker becomes an infinite loop.
At the very least, this strands the cleaner thread, but can also result
in hung tasks/RCU stalls on PREEMPT_NONE kernels and if the
reclaim_bgs_lock mutex is not contended.
I believe the best long term fix is to manage reclaim via work queue,
where we queue up a relocation on the triggering condition and re-queue
on failure. In the meantime, this is an easy fix to apply to avoid the
immediate pain.
Fixes: 7e27180994 ("btrfs: reinsert BGs failed to reclaim")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7be4cb7189 upstream.
After ecf848eb93 ("net: usb: ax88179_178a: fix link status when link is
set to down/up") to not reset from usbnet_open after the reset from
usbnet_probe at initialization stage to speed up this, some issues have
been reported.
It seems to happen that if the initialization is slower, and some time
passes between the probe operation and the open operation, the second reset
from open is necessary too to have the device working. The reason is that
if there is no activity with the phy, this is "disconnected".
In order to improve this, the solution is to detect when the phy is
"disconnected", and we can use the phy status register for this. So we will
only reset the device from reset operation in this situation, that is, only
if necessary.
The same bahavior is happening when the device is stopped (link set to
down) and later is restarted (link set to up), so if the phy keeps working
we only need to enable the mac again, but if enough time passes between the
device stop and restart, reset is necessary, and we can detect the
situation checking the phy status register too.
cc: stable@vger.kernel.org # 6.6+
Fixes: ecf848eb93 ("net: usb: ax88179_178a: fix link status when link is set to down/up")
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Reported-by: Antje Miederhöfer <a.miederhoefer@gmx.de>
Reported-by: Arne Fitzenreiter <arne_f@ipfire.org>
Tested-by: Yongqin Liu <yongqin.liu@linaro.org>
Tested-by: Antje Miederhöfer <a.miederhoefer@gmx.de>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8851346912 upstream.
Assign the configured channel value to the EXTTS event in the timestamp
interrupt handler. Without assigning the correct channel, applications
like ts2phc will refuse to accept the event, resulting in errors such
as:
...
ts2phc[656.834]: config item end1.ts2phc.pin_index is 0
ts2phc[656.834]: config item end1.ts2phc.channel is 3
ts2phc[656.834]: config item end1.ts2phc.extts_polarity is 2
ts2phc[656.834]: config item end1.ts2phc.extts_correction is 0
...
ts2phc[656.862]: extts on unexpected channel
ts2phc[658.141]: extts on unexpected channel
ts2phc[659.140]: extts on unexpected channel
Fixes: f4da56529d ("net: stmmac: Add support for external trigger timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20240618073821.619751-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f92a59f6d1 upstream.
For ${atomic}_sub_and_test() the @i parameter is the value to subtract,
not add. Fix the typo in the kerneldoc template and generate the headers
with this update.
Fixes: ad8110706f ("locking/atomic: scripts: generate kerneldoc comments")
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240515133844.3502360-1-cmllamas@google.com
[cmllamas: generate headers with gen-atomics.sh]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13df4d44a3 upstream.
We can trigger a slab-out-of-bounds with the following commands:
mkfs.ext4 -F /dev/$disk 10G
mount /dev/$disk /tmp/test
echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc
echo test > /tmp/test/file && sync
==================================================================
BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11
CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521
Call Trace:
dump_stack_lvl+0x2c/0x50
kasan_report+0xb6/0xf0
ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
ext4_mb_regular_allocator+0x19e9/0x2370 [ext4]
ext4_mb_new_blocks+0x88a/0x1370 [ext4]
ext4_ext_map_blocks+0x14f7/0x2390 [ext4]
ext4_map_blocks+0x569/0xea0 [ext4]
ext4_do_writepages+0x10f6/0x1bc0 [ext4]
[...]
==================================================================
The flow of issue triggering is as follows:
// Set s_mb_group_prealloc to 2147483647 via sysfs
ext4_mb_new_blocks
ext4_mb_normalize_request
ext4_mb_normalize_group_request
ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc
ext4_mb_regular_allocator
ext4_mb_choose_next_group
ext4_mb_choose_next_group_best_avail
mb_avg_fragment_size_order
order = fls(len) - 2 = 29
ext4_mb_find_good_group_avg_frag_lists
frag_list = &sbi->s_mb_avg_fragment_size[order]
if (list_empty(frag_list)) // Trigger SOOB!
At 4k block size, the length of the s_mb_avg_fragment_size list is 14,
but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds
to be triggered by an attempt to access an element at index 29.
Add a new attr_id attr_clusters_in_group with values in the range
[0, sbi->s_clusters_per_group] and declare mb_group_prealloc as
that type to fix the issue. In addition avoid returning an order
from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb)
and reduce some useless loops.
Fixes: 7e170922f0 ("ext4: Add allocation criteria 1.5 (CR1_5)")
CC: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20240319113325.3110393-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e8e819f8f upstream.
When setting values of type unsigned int through sysfs, we use kstrtoul()
to parse it and then truncate part of it as the final set value, when the
set value is greater than UINT_MAX, the set value will not match what we
see because of the truncation. As follows:
$ echo 4294967296 > /sys/fs/ext4/sda/mb_max_linear_groups
$ cat /sys/fs/ext4/sda/mb_max_linear_groups
0
So we use kstrtouint() to parse the attr_pointer_ui type to avoid the
inconsistency described above. In addition, a judgment is added to avoid
setting s_resv_clusters less than 0.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240319113325.3110393-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a73bda63a1 upstream.
The vf610 gpio driver is used in i.MX8QM, DXL, ULP and i.MX93 chips.
Enable it in arm64 defconfig.
(vf610 gpio used to be enabled by default for all i.MX chips. This was
changed recently as most i.MX chips don't need this driver.)
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e6b6dedf1 upstream.
After starting to install the EC address space handler at the ACPI
namespace root, if there is an "orphan" _REG method in the EC device's
scope, it will not be evaluated any more. This breaks EC operation
regions on some systems, like Asus gu605.
To address this, use a wrapper around an existing ACPICA function to
look for an "orphan" _REG method in the EC device scope and evaluate
it if present.
Fixes: 60fa6ae6e6 ("ACPI: EC: Install address space handler at the namespace root")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218945
Reported-by: VitaliiT <vitaly.torshyn@gmail.com>
Tested-by: VitaliiT <vitaly.torshyn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 36ab7ada64 ]
max_sge attribute is passed by the user, and is inserted and used
unchecked, so verify that the value doesn't exceed maximum allowed value
before using it.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/277ccc29e8d57bfd53ddeb2ac633f2760cf8cdd0.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81497c148b ]
Fix unwind flow as part of mlx5_ib_stage_init_init to use the correct
goto upon an error.
Fixes: 758ce14aee ("RDMA/mlx5: Implement MACsec gid addition and deletion")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/aa40615116eda14ec9eca21d52017d632ea89188.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7c3696d46 ]
Currently we return the value from invoke_psci_fn() directly as return
value from psci_system_suspend(). It is wrong to send the PSCI interface
return value directly. psci_to_linux_errno() provide the mapping from
PSCI return value to the one that can be returned to the callers within
the kernel.
Use psci_to_linux_errno() to convert and return the correct value from
psci_system_suspend().
Fixes: faf7ec4a92 ("drivers: firmware: psci: add system suspend support")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240515095528.1949992-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a23800f08a ]
In io_import_fixed when advancing the iter within the first bvec, the
iter->nr_segs is set to bvec->bv_len. nr_segs should be the number of
bvecs, plus we don't need to adjust it here, so just remove it.
Fixes: b000ae0ec2 ("io_uring/rsrc: optimise single entry advance")
Signed-off-by: Chenliang Li <cliang01.li@samsung.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20240619063819.2445-1-cliang01.li@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df75470b31 ]
The patch 15a6af94a2 ("spi: Increase imx51 ecspi burst length based
on transfer length") increased the burst length calculation in
mx51_ecspi_prepare_transfer() to be based on the transfer length.
This breaks HW CS + SPI_CS_WORD support which was added in
6e95b23a5b ("spi: imx: Implement support for CS_WORD") and transfers
with bits-per-word != 8, 16, 32.
SPI_CS_WORD means the CS should be toggled after each word. The
implementation in the imx-spi driver relies on the fact that the HW CS
is toggled automatically by the controller after each burst length
number of bits. Setting the burst length to the number of bits of the
_whole_ message breaks this use case.
Further the patch 15a6af94a2 ("spi: Increase imx51 ecspi burst
length based on transfer length") claims to optimize the transfers.
But even without this patch, on modern spi-imx controllers with
"dynamic_burst = true" (imx51, imx6 and newer), the transfers are
already optimized, i.e. the burst length is dynamically adjusted in
spi_imx_push() to avoid the pause between the SPI bursts. This has
been confirmed by a scope measurement on an imx6d.
Subsequent Patches tried to fix these and other problems:
- 5f66db08cb ("spi: imx: Take in account bits per word instead of assuming 8-bits")
- e9b220aeac ("spi: spi-imx: correctly configure burst length when using dma")
- c712c05e46 ("spi: imx: fix the burst length at DMA mode and CPU mode")
- cf6d79a0f5 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
but the HW CS + SPI_CS_WORD use case is still broken.
To fix the problems revert the burst size calculation in
mx51_ecspi_prepare_transfer() back to the original form, before
15a6af94a2 ("spi: Increase imx51 ecspi burst length based on
transfer length") was applied.
Cc: Stefan Moring <stefan.moring@technolution.nl>
Cc: Stefan Bigler <linux@bigler.io>
Cc: Clark Wang <xiaoning.wang@nxp.com>
Cc: Carlos Song <carlos.song@nxp.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Thorsten Scherer <T.Scherer@eckelmann.de>
Fixes: 15a6af94a2 ("spi: Increase imx51 ecspi burst length based on transfer length")
Fixes: 5f66db08cb ("spi: imx: Take in account bits per word instead of assuming 8-bits")
Fixes: e9b220aeac ("spi: spi-imx: correctly configure burst length when using dma")
Fixes: c712c05e46 ("spi: imx: fix the burst length at DMA mode and CPU mode")
Fixes: cf6d79a0f5 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
Link: https://lore.kernel.org/all/20240618-oxpecker-of-ideal-mastery-db59f8-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://msgid.link/r/20240618-spi-imx-fix-bustlength-v1-1-2053dd5fdf87@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a83e1385b7 ]
Undo the modifications made in commit d410ee5109 ("ACPICA: avoid
"Info: mapping multiple BARs. Your kernel is fine.""). The initial
purpose of this commit was to stop memory mappings for operation
regions from overlapping page boundaries, as it can trigger warnings
if different page attributes are present.
However, it was found that when this situation arises, mapping
continues until the boundary's end, but there is still an attempt to
read/write the entire length of the map, leading to a NULL pointer
deference. For example, if a four-byte mapping request is made but
only one byte is mapped because it hits the current page boundary's
end, a four-byte read/write attempt is still made, resulting in a NULL
pointer deference.
Instead, map the entire length, as the ACPI specification does not
mandate that it must be within the same page boundary. It is
permissible for it to be mapped across different regions.
Link: https://github.com/acpica/acpica/pull/954
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218849
Fixes: d410ee5109 ("ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine."")
Co-developed-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67cc6125fb ]
SODIMM 17 can be used as an edge triggered interrupt supplied from an
off board source.
Enable hysteresis on the pinmuxing to increase immunity against noise
on the signal.
Fixes: 60f01b5b5c ("arm64: dts: imx8mm-verdin: update iomux configuration")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c03984d43a ]
The IMX8MP_CLK_CLKOUT2 supplies the TC9595 bridge with 13 MHz reference
clock. The IMX8MP_CLK_CLKOUT2 is supplied from IMX8MP_AUDIO_PLL2_OUT.
The IMX8MP_CLK_CLKOUT2 operates only as a power-of-two divider, and the
current 156 MHz is not power-of-two divisible to achieve 13 MHz.
To achieve 13 MHz output from IMX8MP_CLK_CLKOUT2, set IMX8MP_AUDIO_PLL2_OUT
to 208 MHz, because 208 MHz / 16 = 13 MHz.
Fixes: 20d0b83e71 ("arm64: dts: imx8mp: Add TC9595 bridge on DH electronics i.MX8M Plus DHCOM")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72cacd06e4 ]
This patch prevents from registering thermal entries and letting the
driver misbehave if efuse data is invalid. A device is not properly
calibrated if the golden temperature is zero.
Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240604-mtk-thermal-calib-check-v2-1-8f258254051d@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cac29b846 ]
Ramp values are inverted. This caused wrong values written to register
when ramp values were defined in device tree.
Invert values in table to fix this.
Signed-off-by: Kalle Niemi <kaleposti@gmail.com>
Fixes: 1aad39001e ("regulator: Support ROHM BD71815 regulators")
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/ZmmJXtuVJU6RgQAH@latitude5580
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa555b5026 ]
Kbuild does not support having a source file compiled multiple times
and linked into distinct modules, or built-in and modular at the
same time. For fs-edma, there are two common components that are
linked into the fsl-edma.ko for Arm and PowerPC, plus the mcf-edma.ko
module on Coldfire. This violates the rule for compile-testing:
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-common.o is added to multiple modules: fsl-edma mcf-edma
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-trace.o is added to multiple modules: fsl-edma mcf-edma
I tried splitting out the common parts into a separate modules, but
that adds back the complexity that a cleanup patch removed, and it
gets harder with the addition of the tracepoints.
As a minimal workaround, address it at the Kconfig level, by disallowing
the broken configurations.
Link: https://lore.kernel.org/lkml/20240110232255.1099757-1-arnd@kernel.org/
Fixes: 66aac8ea0a ("dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240528115440.2965975-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3215deca4 ]
Use list_for_each_entry_safe() to allow iterating through the list and
deleting the entry in the iteration process. The descriptor is freed via
idxd_desc_complete() and there's a slight chance may cause issue for
the list iterator when the descriptor is reused by another thread
without it being deleted from the list.
Fixes: 16e19e1122 ("dmaengine: idxd: Fix list corruption in description completion")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240603012444.11902-1-lirongqing@baidu.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f67ac0061c ]
According to the IBA specification:
If a UD request packet is detected with an invalid length, the request
shall be an invalid request and it shall be silently dropped by
the responder. The responder then waits for a new request packet.
commit 689c5421bf ("RDMA/rxe: Fix incorrect responder length checking")
defers responder length check for UD QPs in function `copy_data`.
But it introduces a regression issue for UD QPs.
When the packet size is too large to fit in the receive buffer.
`copy_data` will return error code -EINVAL. Then `send_data_in`
will return RESPST_ERR_MALFORMED_WQE. UD QP will transfer into
ERROR state.
Fixes: 689c5421bf ("RDMA/rxe: Fix incorrect responder length checking")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://lore.kernel.org/r/20240523094617.141148-1-honggangli@163.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4eecb644b8 ]
The root clock is actually 49.152MHz not 40MHz, as it is derived from
the primary audio clock, update the driver to match. This error can
cause the actual clock rate to be higher than the requested clock rate
on the SPI bus.
Fixes: ef75e76716 ("spi: cs42l43: Add SPI controller support")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240604131704.3227500-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 056620da89 ]
bnxt_re no longer decide the number of MSI-x vectors used by itself.
Its decided by bnxt_en now. So when bnxt_en changes this value, system
crash is seen.
Depend on the max value reported by bnxt_en instead of using the its own macros.
Fixes: 3034322113 ("bnxt_en: Remove runtime interrupt vector allocation")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1716195418-11767-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e7962114c ]
The current code only restores PTP tx_avail count when we get DMA
mapping errors. Fix it so that the PTP tx_avail count will be
restored for both DMA mapping errors and skb_pad() errors.
Otherwise PTP TX timestamp will not be available after a PTP
packet hits the skb_pad() error.
Fixes: 83bb623c96 ("bnxt_en: Transmit and retrieve packet timestamps")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240618215313.29631-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74382aebc9 ]
Adding/updating VSI list rule, as well as allocating/freeing VSI list
resource are called several times with type ICE_SW_LKUP_LAST, which fails
because ice_update_vsi_list_rule() and ice_aq_alloc_free_vsi_list()
consider it invalid. Allow calling these functions with ICE_SW_LKUP_LAST.
This fixes at least one issue in switchdev mode, where the same rule with
different action cannot be added, e.g.:
tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \
dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF1_PR
tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \
dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF2_PR
Fixes: 0f94570d0c ("ice: allow adding advanced rules")
Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240618210206.981885-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2225e0250 ]
Currently, the sysctl net.netfilter.nf_hooks_lwtunnel depends on the
nf_conntrack module, but the nf_conntrack module is not always loaded.
Therefore, accessing net.netfilter.nf_hooks_lwtunnel may have an error.
Move sysctl nf_hooks_lwtunnel into the netfilter core.
Fixes: 7a3f5b0de3 ("netfilter: add netfilter hooks to SRv6 data plane")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ecd06277a ]
When destroying all sets, we are either in pernet exit phase or
are executing a "destroy all sets command" from userspace. The latter
was taken into account in ip_set_dereference() (nfnetlink mutex is held),
but the former was not. The patch adds the required check to
rcu_dereference_protected() in ip_set_dereference().
Fixes: 4e7aaa6b82 ("netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type")
Reported-by: syzbot+b62c37cdd58103293a5a@syzkaller.appspotmail.com
Reported-by: syzbot+cfbe1da5fdfc39efc293@syzkaller.appspotmail.com
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406141556.e0b6f17e-lkp@intel.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1062d03827 ]
This patch fixes the below build warning messages that are
caused due to linking same files to multiple modules by
exporting the required symbols.
"scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile:
otx2_devlink.o is added to multiple modules: rvu_nicpf rvu_nicvf
scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile:
otx2_dcbnl.o is added to multiple modules: rvu_nicpf rvu_nicvf"
Fixes: 8e67558177 ("octeontx2-pf: PFC config support with DCBx").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b95a4afe2d ]
otx2_sq_append_skb makes used of __vlan_hwaccel_push_inside()
to unoffload VLANs - push them from skb meta data into skb data.
However, it omitts a check for __vlan_hwaccel_push_inside()
returning NULL.
Found by inspection based on [1] and [2].
Compile tested only.
[1] Re: [PATCH net-next v1] net: stmmac: Enable TSO on VLANs
https://lore.kernel.org/all/ZmrN2W8Fye450TKs@shell.armlinux.org.uk/
[2] Re: [PATCH net-next v2] net: stmmac: Enable TSO on VLANs
https://lore.kernel.org/all/CANn89i+11L5=tKsa7V7Aeyxaj6nYGRwy35PAbCRYJ73G+b25sg@mail.gmail.com/
Fixes: fd9d7859db ("octeontx2-pf: Implement ingress/egress VLAN offload")
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 703eec1b24 ]
The XDP program can't correctly handle partially checksummed
packets, but works fine with fully checksummed packets. If the
device has already validated fully checksummed packets, then
the driver doesn't need to re-validate them, saving CPU resources.
Additionally, the driver does not drop all partially checksummed
packets when VIRTIO_NET_F_GUEST_CSUM is not negotiated. This is
not a bug, as the driver has always done this.
Fixes: 436c9453a1 ("virtio-net: keep vnet header zeroed after processing XDP")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 604141c036 ]
In virtio spec 0.95, VIRTIO_NET_F_GUEST_CSUM was designed to handle
partially checksummed packets, and the validation of fully checksummed
packets by the device is independent of VIRTIO_NET_F_GUEST_CSUM
negotiation. However, the specification erroneously stated:
"If VIRTIO_NET_F_GUEST_CSUM is not negotiated, the device MUST set flags
to zero and SHOULD supply a fully checksummed packet to the driver."
This statement is inaccurate because even without VIRTIO_NET_F_GUEST_CSUM
negotiation, the device can still set the VIRTIO_NET_HDR_F_DATA_VALID flag.
Essentially, the device can facilitate the validation of these packets'
checksums - a process known as RX checksum offloading - removing the need
for the driver to do so.
This scenario is currently not implemented in the driver and requires
correction. The necessary specification correction[1] has been made and
approved in the virtio TC vote.
[1] https://lists.oasis-open.org/archives/virtio-comment/202401/msg00011.html
Fixes: 4f49129be6 ("virtio-net: Set RXCSUM feature if GUEST_CSUM is available")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8c43360f6 ]
commit be27b89652 ("net: stmmac: replace priv->speed with
the portTransmitRate from the tc-cbs parameters") introduced
a problem. When deleting, it prompts "Invalid portTransmitRate
0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable.
Only when offload is enabled, speed divider needs to be calculated.
Fixes: be27b89652 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240617013922.1035854-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2b447c9a1 ]
openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to
obtain the first character of $ns. Empirically, this is works with bash
but not dash. When run with dash these evaluate to an empty string and
printing an error to stdout.
# dash -c 'ns=client; echo "${ns:0:1}"' 2>error
# cat error
dash: 1: Bad substitution
# bash -c 'ns=client; echo "${ns:0:1}"' 2>error
c
# cat error
This leads to tests that neither pass nor fail.
F.e.
TEST: arp_ping [START]
adding sandbox 'test_arp_ping'
Adding DP/Bridge IF: sbx:test_arp_ping dp:arpping {, , }
create namespaces
./openvswitch.sh: 282: eval: Bad substitution
TEST: ct_connect_v4 [START]
adding sandbox 'test_ct_connect_v4'
Adding DP/Bridge IF: sbx:test_ct_connect_v4 dp:ct4 {, , }
./openvswitch.sh: 322: eval: Bad substitution
create namespaces
Resolve this by making openvswitch.sh a bash script.
Fixes: 918423fda9 ("selftests: openvswitch: add an initial flow programming case")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240617-ovs-selftest-bash-v1-1-7ae6ccd3617b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
