commit 866d648059 upstream.
1 is the return value that implements a "no-op" hook, not 0.
Cc: stable@vger.kernel.org
Fixes: 98e828a065 ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b211c7671 upstream.
This reverts commit 0b01392c18.
Conversion of PXA to generic I2C recovery, makes the I2C bus completely
lock up if recovery pinctrl is present in the DT and I2C recovery is
enabled.
So, until the generic I2C recovery can also work with PXA lets revert
to have working I2C and I2C recovery again.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: stable@vger.kernel.org # 5.11+
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e2e7efbbb upstream.
This reverts commit 3780bb2931.
The cited commit introduced unwanted behavior.
The intent for the commit was to be able to detect carrier loss/gain
for just the NIC connected to the BMC. The unwanted effect is a
carrier loss for auxiliary paths also causes the BMC to lose
carrier. The BMC never regains carrier despite the secondary NIC
regaining a link.
This change, when merged, needs to be backported to stable kernels.
5.4-stable, 5.10-stable, 5.15-stable, 6.1-stable, 6.5-stable
Fixes: 3780bb2931 ("ncsi: Propagate carrier gain/loss events to the NCSI controller")
CC: stable@vger.kernel.org
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d639b6097 upstream.
These HP laptops use Realtek HDA codec combined with 2 or 4 CS35L41
Amplifiers using SPI with Internal Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231115162116.494968-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b944aa9d86 upstream.
HP 255 G10 has a mute LED that can be made to work using quirk
ALC236_FIXUP_HP_MUTE_LED_COEFBIT2.
Enable already existing quirk - at correct line to keep order
Signed-off-by: Matus Malych <matus@malych.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231114133524.11340-1-matus@malych.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b21a669ca upstream.
Add ALC295 to pin fall back table.
Remove 5 pin quirks for Dell ALC295.
ALC295 was only support MIC2 for external MIC function.
ALC295 assigned model "ALC269_FIXUP_DELL1_MIC_NO_PRESENCE" for pin
fall back table.
It was assigned wrong model. So, let's remove it.
Fixes: fbc571290d ("ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/7c1998e873834df98d59bd7e0d08c72e@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7a6065195 upstream.
As reported recently, ALSA core info helper may cause a deadlock at
the forced device disconnection during the procfs operation.
The proc_remove() (that is called from the snd_card_disconnect()
helper) has a synchronization of the pending procfs accesses via
wait_for_completion(). Meanwhile, ALSA procfs helper takes the global
mutex_lock(&info_mutex) at both the proc_open callback and
snd_card_info_disconnect() helper. Since the proc_open can't finish
due to the mutex lock, wait_for_completion() never returns, either,
hence it deadlocks.
TASK#1 TASK#2
proc_reg_open()
takes use_pde()
snd_info_text_entry_open()
snd_card_disconnect()
snd_info_card_disconnect()
takes mutex_lock(&info_mutex)
proc_remove()
wait_for_completion(unused_pde)
... waiting task#1 closes
mutex_lock(&info_mutex)
=> DEADLOCK
This patch is a workaround for avoiding the deadlock scenario above.
The basic strategy is to move proc_remove() call outside the mutex
lock. proc_remove() can work gracefully without extra locking, and it
can delete the tree recursively alone. So, we call proc_remove() at
snd_info_card_disconnection() at first, then delete the rest resources
recursively within the info_mutex lock.
After the change, the function snd_info_disconnect() doesn't do
disconnection by itself any longer, but it merely clears the procfs
pointer. So rename the function to snd_info_clear_entries() for
avoiding confusion.
The similar change is applied to snd_info_free_entry(), too. Since
the proc_remove() is called only conditionally with the non-NULL
entry->p, it's skipped after the snd_info_clear_entries() call.
Reported-by: Shinhyung Kang <s47.kang@samsung.com>
Closes: https://lore.kernel.org/r/664457955.21699345385931.JavaMail.epsvc@epcpadp4
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231109141954.4283-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 776a838f1f upstream.
Running the fio command below on a ZNS device results in "Resource
temporarily unavailable" error.
$ sudo fio --name=w --directory=/mnt --filesize=1GB --bs=16MB --numjobs=16 \
--rw=write --ioengine=libaio --iodepth=128 --direct=1
fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=117440512, buflen=16777216
fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=134217728, buflen=16777216
...
This happens because -EAGAIN error returned from btrfs_reserve_extent()
called from btrfs_new_extent_direct() is spilling over to the userland.
btrfs_reserve_extent() returns -EAGAIN when there is no active zone
available. Then, the caller should wait for some other on-going IO to
finish a zone and retry the allocation.
This logic is already implemented for buffered write in cow_file_range(),
but it is missing for the direct IO counterpart. Implement the same logic
for it.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 2ce543f478 ("btrfs: zoned: wait until zone is finished when allocation didn't progress")
CC: stable@vger.kernel.org # 6.1+
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7930d9e103 upstream.
Because on v3 inodes, di_flushiter doesn't exist. It overlaps with
zero padding in the inode, except when NREXT64=1 configurations are
in use and the zero padding is no longer padding but holds the 64
bit extent counter.
This manifests obviously on big endian platforms (e.g. s390) because
the log dinode is in host order and the overlap is the LSBs of the
extent count field. It is not noticed on little endian machines
because the overlap is at the MSB end of the extent count field and
we need to get more than 2^^48 extents in the inode before it
manifests. i.e. the heat death of the universe will occur before we
see the problem in little endian machines.
This is a zero-day issue for NREXT64=1 configuraitons on big endian
machines. Fix it by only clearing di_flushiter on v2 inodes during
recovery.
Fixes: 9b7d16e34b ("xfs: Introduce XFS_DIFLAG2_NREXT64 and associated helpers")
cc: stable@kernel.org # 5.19+
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37de5a80e9 upstream.
Each smb_rqst struct contains two things: an array of kvecs (rq_iov) that
contains the protocol data for an RPC op and an iterator (rq_iter) that
contains the data payload of an RPC op. When an smb_rqst is allocated
rq_iter is it always cleared, but we don't set it up unless we're going to
use it.
The functions that determines the size of the ciphertext buffer that will
be needed to encrypt a request, cifs_get_num_sgs(), assumes that rq_iter is
always initialised - and employs user_backed_iter() to check that the
iterator isn't user-backed. This used to incidentally work, because
->user_backed was set to false because the iterator has never been
initialised, but with commit f1b4cb650b9a0eeba206d8f069fcdc532bfbcd74[1]
which changes user_backed_iter() to determine this based on the iterator
type insted, a warning is now emitted:
WARNING: CPU: 7 PID: 4584 at fs/smb/client/cifsglob.h:2165 smb2_get_aead_req+0x3fc/0x420 [cifs]
...
RIP: 0010:smb2_get_aead_req+0x3fc/0x420 [cifs]
...
crypt_message+0x33e/0x550 [cifs]
smb3_init_transform_rq+0x27d/0x3f0 [cifs]
smb_send_rqst+0xc7/0x160 [cifs]
compound_send_recv+0x3ca/0x9f0 [cifs]
cifs_send_recv+0x25/0x30 [cifs]
SMB2_tcon+0x38a/0x820 [cifs]
cifs_get_smb_ses+0x69c/0xee0 [cifs]
cifs_mount_get_session+0x76/0x1d0 [cifs]
dfs_mount_share+0x74/0x9d0 [cifs]
cifs_mount+0x6e/0x2e0 [cifs]
cifs_smb3_do_mount+0x143/0x300 [cifs]
smb3_get_tree+0x15e/0x290 [cifs]
vfs_get_tree+0x2d/0xe0
do_new_mount+0x124/0x340
__se_sys_mount+0x143/0x1a0
The problem is that rq_iter was never set, so the type is 0 (ie. ITER_UBUF)
which causes user_backed_iter() to return true. The code doesn't
malfunction because it checks the size of the iterator - which is 0.
Fix cifs_get_num_sgs() to ignore rq_iter if its count is 0, thereby
bypassing the warnings.
It might be better to explicitly initialise rq_iter to a zero-length
ITER_BVEC, say, as it can always be reinitialised later.
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Reported-by: Damian Tometzki <damian@riscv-rocks.de>
Closes: https://lore.kernel.org/r/ZUfQo47uo0p2ZsYg@fedora.fritz.box/
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Cc: stable@vger.kernel.org
cc: Eric Biggers <ebiggers@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f1b4cb650b9a0eeba206d8f069fcdc532bfbcd74 [1]
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e5e64c947 upstream.
If the mount command has specified multichannel as a mount option,
but multichannel is found to be unsupported by the server at the time
of mount, we set chan_max to 1. Which means that the user needs to
remount the share if the server starts supporting multichannel.
This change removes this reset. What it means is that if the user
specified multichannel or max_channels during mount, and at this
time, multichannel is not supported, but the server starts supporting
it at a later point, the client will be capable of scaling out the
number of channels.
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9a6d78096 upstream.
During a session reconnect, it is possible that the
server moved to another physical server (happens in case
of Azure files). So at this time, force a query of server
interfaces again (in case of multichannel session), such
that the secondary channels connect to the right
IP addresses (possibly updated now).
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3326a61cd upstream.
We introduced a helper function to be used by non-cifsd threads to
mark the connection for reconnect. For multichannel, when only
a particular channel needs to be reconnected, this had a bug.
This change fixes that by marking that particular channel
for reconnect.
Fixes: dca65818c8 ("cifs: use a different reconnect helper for non-cifsd threads")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6322fd177 upstream.
All release_mid() callers seem to hold a reference of @mid so there is
no need to call kref_put(&mid->refcount, __release_mid) under
@server->mid_lock spinlock. If they don't, then an use-after-free bug
would have occurred anyways.
By getting rid of such spinlock also fixes a potential deadlock as
shown below
CPU 0 CPU 1
------------------------------------------------------------------
cifs_demultiplex_thread() cifs_debug_data_proc_show()
release_mid()
spin_lock(&server->mid_lock);
spin_lock(&cifs_tcp_ses_lock)
spin_lock(&server->mid_lock)
__release_mid()
smb2_find_smb_tcon()
spin_lock(&cifs_tcp_ses_lock) *deadlock*
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c86919455 upstream.
The following UAF was triggered when running fstests generic/072 with
KASAN enabled against Windows Server 2022 and mount options
'multichannel,max_channels=2,vers=3.1.1,mfsymlinks,noperm'
BUG: KASAN: slab-use-after-free in smb2_query_info_compound+0x423/0x6d0 [cifs]
Read of size 8 at addr ffff888014941048 by task xfs_io/27534
CPU: 0 PID: 27534 Comm: xfs_io Not tainted 6.6.0-rc7 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack_lvl+0x4a/0x80
print_report+0xcf/0x650
? srso_alias_return_thunk+0x5/0x7f
? srso_alias_return_thunk+0x5/0x7f
? __phys_addr+0x46/0x90
kasan_report+0xda/0x110
? smb2_query_info_compound+0x423/0x6d0 [cifs]
? smb2_query_info_compound+0x423/0x6d0 [cifs]
smb2_query_info_compound+0x423/0x6d0 [cifs]
? __pfx_smb2_query_info_compound+0x10/0x10 [cifs]
? srso_alias_return_thunk+0x5/0x7f
? __stack_depot_save+0x39/0x480
? kasan_save_stack+0x33/0x60
? kasan_set_track+0x25/0x30
? ____kasan_slab_free+0x126/0x170
smb2_queryfs+0xc2/0x2c0 [cifs]
? __pfx_smb2_queryfs+0x10/0x10 [cifs]
? __pfx___lock_acquire+0x10/0x10
smb311_queryfs+0x210/0x220 [cifs]
? __pfx_smb311_queryfs+0x10/0x10 [cifs]
? srso_alias_return_thunk+0x5/0x7f
? __lock_acquire+0x480/0x26c0
? lock_release+0x1ed/0x640
? srso_alias_return_thunk+0x5/0x7f
? do_raw_spin_unlock+0x9b/0x100
cifs_statfs+0x18c/0x4b0 [cifs]
statfs_by_dentry+0x9b/0xf0
fd_statfs+0x4e/0xb0
__do_sys_fstatfs+0x7f/0xe0
? __pfx___do_sys_fstatfs+0x10/0x10
? srso_alias_return_thunk+0x5/0x7f
? lockdep_hardirqs_on_prepare+0x136/0x200
? srso_alias_return_thunk+0x5/0x7f
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Allocated by task 27534:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
__kasan_kmalloc+0x8f/0xa0
open_cached_dir+0x71b/0x1240 [cifs]
smb2_query_info_compound+0x5c3/0x6d0 [cifs]
smb2_queryfs+0xc2/0x2c0 [cifs]
smb311_queryfs+0x210/0x220 [cifs]
cifs_statfs+0x18c/0x4b0 [cifs]
statfs_by_dentry+0x9b/0xf0
fd_statfs+0x4e/0xb0
__do_sys_fstatfs+0x7f/0xe0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 27534:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x50
____kasan_slab_free+0x126/0x170
slab_free_freelist_hook+0xd0/0x1e0
__kmem_cache_free+0x9d/0x1b0
open_cached_dir+0xff5/0x1240 [cifs]
smb2_query_info_compound+0x5c3/0x6d0 [cifs]
smb2_queryfs+0xc2/0x2c0 [cifs]
This is a race between open_cached_dir() and cached_dir_lease_break()
where the cache entry for the open directory handle receives a lease
break while creating it. And before returning from open_cached_dir(),
we put the last reference of the new @cfid because of
!@cfid->has_lease.
Besides the UAF, while running xfstests a lot of missed lease breaks
have been noticed in tests that run several concurrent statfs(2) calls
on those cached fids
CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame...
CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1...
CIFS: VFS: \\w22-root1.gandalf.test smb buf 00000000715bfe83 len 108
CIFS: VFS: Dump pending requests:
CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame...
CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1...
CIFS: VFS: \\w22-root1.gandalf.test smb buf 000000005aa7316e len 108
...
To fix both, in open_cached_dir() ensure that @cfid->has_lease is set
right before sending out compounded request so that any potential
lease break will be get processed by demultiplex thread while we're
still caching @cfid. And, if open failed for some reason, re-check
@cfid->has_lease to decide whether or not put lease reference.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5923d6686a upstream.
Fixes xfstest generic/728 which had been failing due to incorrect
ctime after setxattr and removexattr
Update ctime on successful set of xattr
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de4eceab57 upstream.
When multiple mounts are to the same share from the same client it was not
possible to determine which section of /proc/fs/cifs/Stats (and DebugData)
correspond to that mount. In some recent examples this turned out to be
a significant problem when trying to analyze performance data - since
there are many cases where unless we know the tree id and session id we
can't figure out which stats (e.g. number of SMB3.1.1 requests by type,
the total time they take, which is slowest, how many fail etc.) apply to
which mount. The only existing loosely related ioctl CIFS_IOC_GET_MNT_INFO
does not return the information needed to uniquely identify which tcon
is which mount although it does return various flags and device info.
Add a cifs.ko ioctl CIFS_IOC_GET_TCON_INFO (0x800ccf0c) to return tid,
session id, tree connect count.
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 475efd9808 upstream.
For example:
touch -h -t 02011200 testfile
where testfile is a symlink would not change the timestamp, but
touch -t 02011200 testfile
does work to change the timestamp of the target
Suggested-by: David Howells <dhowells@redhat.com>
Reported-by: Micah Veilleux <micah.veilleux@iba-group.com>
Closes: https://bugzilla.samba.org/show_bug.cgi?id=14476
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72bc63f5e2 upstream.
Fixes some xfstests including generic/564 and generic/157
The "sfu" mount option can be useful for creating special files (character
and block devices in particular) but could not create FIFOs. It did
recognize existing empty files with the "system" attribute flag as FIFOs
but this is too general, so to support creating FIFOs more safely use a new
tag (but the same length as those for char and block devices ie "IntxLNK"
and "IntxBLK") "LnxFIFO" to indicate that the file should be treated as a
FIFO (when mounted with the "sfu"). For some additional context note that
"sfu" followed the way that "Services for Unix" on Windows handled these
special files (at least for character and block devices and symlinks),
which is different than newer Windows which can handle special files
as reparse points (which isn't an option to many servers).
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b6304c1d5 upstream.
struct timespec64 has unused bits in the tv_nsec field that can be used
for other purposes. In future patches, we're going to change how the
inode->i_ctime is accessed in certain inodes in order to make use of
them. In order to do that safely though, we'll need to eradicate raw
accesses of the inode->i_ctime field from the kernel.
Add new accessor functions for the ctime that we use to replace them.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Message-Id: <20230705185812.579118-2-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5d6264b63 upstream.
Use the low-power states of the underlying platform to enable runtime PM.
If the platform doesn't support runtime D3, then enabling default RPM will
result in the controller malfunctioning, as in the case of hotplug devices
not being detected because of a failed interrupt generation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-16-mathias.nyman@linux.intel.com
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ad6e15a9c upstream.
Firmware returns the physical address of the power switch,
so need to use gsc_writel() instead of direct memory access.
Fixes: d0c2194729 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 166b0110d1 upstream.
When calculating the pfn for the iitlbt/idtlbt instruction, do not
drop the upper 5 address bits. This doesn't seem to have an effect
on physical hardware which uses less physical address bits, but in
qemu the missing bits are visible.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a406b8b424 upstream.
Bail out early with error message when trying to boot a 64-bit kernel on
32-bit machines. This fixes the previous commit to include the check for
true 64-bit kernels as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 591d2108f3 ("parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines")
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 426056efe8 ]
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use nth_page() to handle
it properly.
A wrong or non-existing page might be tried to be grabbed, either
leading to a non freeable page or kernel memory access errors. No bug
is reported. It comes from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-3-zi.yan@sent.com
Fixes: 57a196a584 ("hugetlb: simplify hugetlb handling in follow_page_mask")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 458568c929 ]
follow_page() doesn't use FOLL_PIN, meanwhile hugetlb seems to not be the
target of FOLL_WRITE either. However add the checks.
Namely, either the need to CoW due to missing write bit, or proper
unsharing on !AnonExclusive pages over R/O pins to reject the follow page.
That brings this function closer to follow_hugetlb_page().
So we don't care before, and also for now. But we'll care if we switch
over slow-gup to use hugetlb_follow_page_mask(). We'll also care when to
return -EMLINK properly, as that's the gup internal api to mean "we should
unshare". Not really needed for follow page path, though.
When at it, switching the try_grab_page() to use WARN_ON_ONCE(), to be
clear that it just should never fail. When error happens, instead of
setting page==NULL, capture the errno instead.
Link: https://lkml.kernel.org/r/20230628215310.73782-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 426056efe8 ("mm/hugetlb: use nth_page() in place of direct struct page manipulation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cca42bd8eb ]
The stuttering code isn't functioning as expected. Ideally, it should
pause the torture threads for a designated period before resuming. Yet,
it fails to halt the test for the correct duration. Additionally, a race
condition exists, potentially causing the stuttering code to pause for
an extended period if the 'spt' variable is non-zero due to the stutter
orchestration thread's inadequate CPU time.
Moreover, over-stuttering can hinder RCU's progress on TREE07 kernels.
This happens as the stuttering code may run within a softirq due to RCU
callbacks. Consequently, ksoftirqd keeps a CPU busy for several seconds,
thus obstructing RCU's progress. This situation triggers a warning
message in the logs:
[ 2169.481783] rcu_torture_writer: rtort_pipe_count: 9
This warning suggests that an RCU torture object, although invisible to
RCU readers, couldn't make it past the pipe array and be freed -- a
strong indication that there weren't enough grace periods during the
stutter interval.
To address these issues, this patch sets the "stutter end" time to an
absolute point in the future set by the main stutter thread. This is
then used for waiting in stutter_wait(). While the stutter thread still
defines this absolute time, the waiters' waiting logic doesn't rely on
the stutter thread receiving sufficient CPU time to halt the stuttering
as the halting is now self-controlled.
Cc: stable@vger.kernel.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a741deac78 ]
The current torture-test sleeps are waiting for a duration, but there
are situations where it is better to wait for an absolute time, for
example, when ending a stutter interval. This commit therefore adds
an hrtimer mode parameter to torture_hrtimeout_ns(). Why not also the
other torture_hrtimeout_*() functions? The theory is that most absolute
times will be in nanoseconds, especially not (say) jiffies.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Stable-dep-of: cca42bd8eb ("rcutorture: Fix stuttering races and other issues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10af43671e ]
In order to gain better race coverage, move the test start/stop
waits in stutter_wait() to torture_hrtimeout_jiffies().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: cca42bd8eb ("rcutorture: Fix stuttering races and other issues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 872948c665 ]
Given that it is expected that more code will use torture_hrtimeout_*(),
including for longer timeouts, make it use TASK_IDLE instead of
TASK_UNINTERRUPTIBLE.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: cca42bd8eb ("rcutorture: Fix stuttering races and other issues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d248bb39f ]
This commit adds a module parameter that causes the locktorture writer
to run at real-time priority.
To use it:
insmod /lib/modules/torture.ko random_shuffle=1
insmod /lib/modules/locktorture.ko torture_type=mutex_lock rt_boost=1 rt_boost_factor=50 nested_locks=3 writer_fifo=1
^^^^^^^^^^^^^
A predecessor to this patch has been helpful to uncover issues with the
proxy-execution series.
[ paulmck: Remove locktorture-specific code from kernel/torture.c. ]
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: kernel-team@android.com
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
[jstultz: Include header change to build, reword commit message]
Signed-off-by: John Stultz <jstultz@google.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: cca42bd8eb ("rcutorture: Fix stuttering races and other issues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67d5404d27 ]
This commit adds a kthread-creation callback to the
_torture_create_kthread() function, which allows callers of a new
torture_create_kthread_cb() macro to specify a function to be invoked
after the kthread is created but before it is awakened for the first time.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: kernel-team@android.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: John Stultz <jstultz@google.com>
Stable-dep-of: cca42bd8eb ("rcutorture: Fix stuttering races and other issues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9260693aa ]
Commit ac91e69805 ("PCI: Unify delay handling for reset and resume")
shortened an unconditional 1 sec delay after a Secondary Bus Reset to 100
msec for PCIe (per PCIe r6.1 sec 6.6.1). The 1 sec delay is only required
for Conventional PCI.
But it turns out that there are PCIe devices which require a longer delay
than prescribed before first config space access after reset recovery or
resume from D3cold:
Chad reports that a "VideoPropulsion Torrent QN16e" MPEG QAM Modulator
"raises a PCI system error (PERR), as reported by the IPMI event log, and
the hardware itself would suffer a catastrophic event, cycling the server"
unless the longer delay is observed.
The card is specified to conform to PCIe r1.0 and indeed only supports Gen1
speed (2.5 GT/s) according to lspci. PCIe r1.0 sec 7.6 prescribes the same
100 msec delay as PCIe r6.1 sec 6.6.1:
To allow components to perform internal initialization, system software
must wait for at least 100 ms from the end of a reset (cold/warm/hot)
before it is permitted to issue Configuration Requests
The behavior of the Torrent QN16e card thus appears to be a quirk. Treat
it as such and lengthen the reset delay for this specific device.
Fixes: ac91e69805 ("PCI: Unify delay handling for reset and resume")
Link: https://lore.kernel.org/r/47727e792c7f0282dc144e3ec8ce8eb6e713394e.1695304512.git.lukas@wunner.de
Reported-by: Chad Schroeder <CSchroeder@sonifi.com>
Closes: https://lore.kernel.org/linux-pci/DM6PR16MB2844903E34CAB910082DF019B1FAA@DM6PR16MB2844.namprd16.prod.outlook.com/
Tested-by: Chad Schroeder <CSchroeder@sonifi.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a07d2497ed ]
The DWC core driver exposes the write_dbi2() callback for writing to the
DBI2 registers in a vendor-specific way.
On the Qcom EP platforms, the DBI_CS2 bit in the ELBI region needs to be
asserted before writing to any DBI2 registers and deasserted once done.
So, let's implement the callback for the Qcom PCIe EP driver so that the
DBI2 writes are correctly handled in the hardware.
Without this callback, the DBI2 register writes like BAR size won't go
through and as a result, the default BAR size is set for all BARs.
[kwilczynski: commit log, renamed function to match the DWC convention]
Fixes: f55fee56a6 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231025130029.74693-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 374de39d38 ]
Currently, The imx pgc power domain doesn't set the fwnode
pointer, which results in supply regulator device can't get
consumer imx pgc power domain device from fwnode when creating
a link.
This causes the driver core to instead try to create a link
between the parent gpc device of imx pgc power domain device and
supply regulator device. However, at this point, the gpc device
has already been bound, and the link creation will fail. So adding
the fwnode pointer to the imx pgc power domain device will fix
this issue.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Tested-by: Emil Kronborg <emil.kronborg@protonmail.com>
Fixes: 3fb16866b5 ("driver core: fw_devlink: Make cycle detection more robust")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020185949.537083-1-pengfei.li_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b131329b9b ]
Without this change, the NPU hangs when the 8th NN core is used.
It matches what the out-of-tree driver does.
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Fixes: 9a217b7e89 ("soc: amlogic: meson-pwrc: Add NNA power domain for A311D")
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231016080205.41982-2-tomeu@tomeuvizoso.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e75396f1d ]
The commit c494a447c1 ("soc: bcm: bcm2835-power: Refactor ASB control")
refactored the ASB control by using a general function to handle both
the enable and disable. But this patch introduced a subtle regression:
we need to check if !!(readl(base + reg) & ASB_ACK) == enable, not just
check if (readl(base + reg) & ASB_ACK) == true.
Currently, this is causing an invalid register state in V3D when
unloading and loading the driver, because `bcm2835_asb_disable()` will
return -ETIMEDOUT and `bcm2835_asb_power_off()` will fail to disable the
ASB slave for V3D.
Fixes: c494a447c1 ("soc: bcm: bcm2835-power: Refactor ASB control")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231024101251.6357-2-mcanal@igalia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8d2ad999ca upstream.
The CXL subsystem, at cxl_mem ->probe() time, establishes a lineage of
ports (struct cxl_port objects) between an endpoint and the root of a
CXL topology. Each port including the endpoint port is attached to the
cxl_port driver.
Given that setup, it follows that when either any port in that lineage
goes through a cxl_port ->remove() event, or the memdev goes through a
cxl_mem ->remove() event. The hierarchy below the removed port, or the
entire hierarchy if the memdev is removed needs to come down.
The delete_endpoint() callback is careful to check whether it is being
called to tear down the hierarchy, or if it is only being called to
teardown the memdev because an ancestor port is going through
->remove().
That care needs to take the device_lock() of the endpoint's parent.
Which requires 2 bugs to be fixed:
1/ A reference on the parent is needed to prevent use-after-free
scenarios like this signature:
BUG: spinlock bad magic on CPU#0, kworker/u56:0/11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023
Workqueue: cxl_port detach_memdev [cxl_core]
RIP: 0010:spin_bug+0x65/0xa0
Call Trace:
do_raw_spin_lock+0x69/0xa0
__mutex_lock+0x695/0xb80
delete_endpoint+0xad/0x150 [cxl_core]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1d2/0x210
detach_memdev+0x15/0x20 [cxl_core]
process_one_work+0x1e3/0x4c0
worker_thread+0x1dd/0x3d0
2/ In the case of RCH topologies, the parent device that needs to be
locked is not always @port->dev as returned by cxl_mem_find_port(), use
endpoint->dev.parent instead.
Fixes: 8dd2bc0f8e ("cxl/mem: Add the cxl_mem driver")
Cc: <stable@vger.kernel.org>
Reported-by: Robert Richter <rrichter@amd.com>
Closes: http://lore.kernel.org/r/20231018171713.1883517-2-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98a04c7ace upstream.
Root decoder granularity must match value from CFWMS, which may not
be the region's granularity for non-interleaved root decoders.
So when calculating granularities for host bridge decoders, use the
region's granularity instead of the root decoder's granularity to ensure
the correct granularities are set for the host bridge decoders and any
downstream switch decoders.
Test configuration is 1 host bridge * 2 switches * 2 endpoints per switch.
Region created with 2048 granularity using following command line:
cxl create-region -m -d decoder0.0 -w 4 mem0 mem2 mem1 mem3 \
-g 2048 -s 2048M
Use "cxl list -PDE | grep granularity" to get a view of the granularity
set at each level of the topology.
Before this patch:
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":512,
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":512,
"interleave_granularity":256,
After:
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":4096,
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":4096,
"interleave_granularity":2048,
Fixes: 27b3f8d138 ("cxl/region: Program target lists")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/169824893473.1403938.16110924262989774582.stgit@bgt-140510-bm03.eng.stellus.in
[djbw: fixup the prebuilt cxl_test region]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9aaeef113c upstream.
master side report:
silvaco-i3c-master 44330000.i3c-master: Error condition: MSTATUS 0x020090c7, MERRWARN 0x00100000
BIT 20: TIMEOUT error
The module has stalled too long in a frame. This happens when:
- The TX FIFO or RX FIFO is not handled and the bus is stuck in the
middle of a message,
- No STOP was issued and between messages,
- IBI manual is used and no decision was made.
The maximum stall period is 100 μs.
This can be considered as being just a warning as the system IRQ latency
can easily be greater than 100us.
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-7-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfd7cd6aaf upstream.
Upon IBIWON timeout, the SDA line will always be kept low if we don't emit
a stop. Calling svc_i3c_master_emit_stop() there will let the bus return to
idle state.
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-6-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c85e209b79 upstream.
MSTATUS[RXPEND] is only updated after the data transfer cycle started. This
creates an issue when the I3C clock is slow, and the CPU is running fast
enough that MSTATUS[RXPEND] may not be updated when the code reaches
checking point. As a result, mandatory data can be missed.
Add a wait for MSTATUS[COMPLETE] to ensure that all mandatory data is
already in FIFO. It also works without mandatory data.
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-4-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e5e3c92e7 upstream.
┌─────┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┌─────
SCL: ┘ └─────┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┘
───┐ ┌─────┐ ┌─────┐ ┌───────────┐
SDA: └───────────────────────┘ └─────┘ └─────┘ └─────
xxx╱ ╲╱ ╲╱ ╲╱ ╲╱ ╲
: xxx╲IBI ╱╲ Addr(0x0a) ╱╲ RW ╱╲NACK╱╲ S ╱
If an In-Band Interrupt (IBI) occurs and IBI work thread is not immediately
scheduled, when svc_i3c_master_priv_xfers() initiates the I3C transfer and
attempts to send address 0x7e, the target interprets it as an
IBI handler and returns the target address 0x0a.
However, svc_i3c_master_priv_xfers() does not handle this case and proceeds
with other transfers, resulting in incorrect data being returned.
Add IBIWON check in svc_i3c_master_xfer(). In case this situation occurs,
return a failure to the driver.
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-3-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bf3fc2681 upstream.
The ibi work thread operates asynchronously with other transfers, such as
svc_i3c_master_priv_xfers(). Introduce mutex protection to ensure the
completion of the entire i3c/i2c transaction.
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-2-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0718588c7a upstream.
Commit 5e42bcbc3f ("cxl/region: decrement ->nr_targets on error in
cxl_region_attach()") tried to avoid 'eiw' initialization errors when
->nr_targets exceeded 16, by just decrementing ->nr_targets when
cxl_region_setup_targets() failed.
Commit 86987c7662 ("cxl/region: Cleanup target list on attach error")
extended that cleanup to also clear cxled->pos and p->targets[pos]. The
initialization error was incidentally fixed separately by:
Commit 8d42854257 ("cxl/region: Fix port setup uninitialized variable
warnings") which was merged a few days after 5e42bcbc3f.
But now the original cleanup when cxl_region_setup_targets() fails
prevents endpoint and switch decoder resources from being reused:
1) the cleanup does not set the decoder's region to NULL, which results
in future dpa_size_store() calls returning -EBUSY
2) the decoder is not properly freed, which results in future commit
errors associated with the upstream switch
Now that the initialization errors were fixed separately, the proper
cleanup for this case is to just return immediately. Then the resources
associated with this target get cleanup up as normal when the failed
region is deleted.
The ->nr_targets decrement in the error case also helped prevent
a p->targets[] array overflow, so add a new check to prevent against
that overflow.
Tested by trying to create an invalid region for a 2 switch * 2 endpoint
topology, and then following up with creating a valid region.
Fixes: 5e42bcbc3f ("cxl/region: decrement ->nr_targets on error in cxl_region_attach()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169703589120.1202031.14696100866518083806.stgit@bgt-140510-bm03.eng.stellus.in
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
