For blkcg_css_alloc(), the only error that will be returned is -ENOMEM.
Simplify error handling code by returning this error directly instead
of setting an intermediate "ret" variable.
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221105005902.407297-2-longman@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We hold a reference to the holder kobject for each bd_holder_disk,
so to make the code a bit more robust, use a reference to it instead
of the block_device. As long as no one clears ->bd_holder_dir in
before freeing the disk, this isn't strictly required, but it does
make the code more clear and more robust.
Orignally-From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221115141054.1051801-10-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, the caller of bd_link_disk_holer() get 'bdev' by
blkdev_get_by_dev(), which will look up 'bdev' by inode number 'dev'.
Howerver, it's possible that del_gendisk() can be called currently, and
'bd_holder_dir' can be freed before bd_link_disk_holer() access it, thus
use after free is triggered.
t1: t2:
bdev = blkdev_get_by_dev
del_gendisk
kobject_put(bd_holder_dir)
kobject_free()
bd_link_disk_holder
Fix the problem by checking disk is still live and grabbing a reference
to 'bd_holder_dir' first in bd_link_disk_holder().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221115141054.1051801-9-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that dm has been fixed to track of holder registrations before
add_disk, the somewhat buggy block layer code can be safely removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20221115141054.1051801-8-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dm is a bit special in that it opens the underlying devices. Commit
89f871af1b ("dm: delay registering the gendisk") tried to accommodate
that by allowing to add the holder to the list before add_gendisk and
then just add them to sysfs once add_disk is called. But that leads to
really odd lifetime problems and error handling problems as we can't
know the state of the kobjects and don't unwind properly. To fix this
switch to just registering all existing table_devices with the holder
code right after add_disk, and remove them before calling del_gendisk.
Fixes: 89f871af1b ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
open_table_device() and close_table_device() is protected by
table_devices_lock, hence use it to protect add_disk() and
del_gendisk().
Prepare to track per-add_disk holder relations in dm.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221115141054.1051801-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Take the list unlink and free into close_table_device so that no half
torn down table_devices exist. Also remove the check for a NULL bdev
as that can't happen - open_table_device never adds a table_device to
the list that does not have a valid block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move all the logic for allocation the table_device and linking it into
the list into the open_table_device. This keeps the code tidy and
ensures that the table_devices only exist in fully initialized state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
free_table_devices just warns and frees all table_device structures when
the target removal did not remove them. This should never happen, but
if it did, just freeing the structure without deleting them from the
list or cleaning up the resources would not help at all. So just WARN on
a non-empty list instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zero out the pointer to ->slave_dir so that the holder code doesn't
incorrectly treat the object as alive when add_disk failed or after
del_gendisk was called.
Fixes: 89f871af1b ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan reported the new algorithm as merged might be problematic if the
queue being awaken becomes empty between the waitqueue_active inside
sbq_wake_ptr check and the wake up. If that happens, wake_up_nr will
not wake up any waiter and we loose too many wake ups. In order to
guarantee progress, we need to wake up at least one waiter here, if
there are any. This now requires trying to wake up from every queue.
Instead of walking through all the queues with sbq_wake_ptr, this call
moves the wake up inside that function. In a previous version of the
patch, I found that updating wake_index several times when walking
through queues had a measurable overhead. This ensures we only update
it once, at the end.
Fixes: 4f8126bb23 ("sbitmap: Use single per-bitmap counting to wake up queued tags")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221115224553.23594-4-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sbitmap code will need to know how many waiters were actually woken for
its batched wakeups implementation. Return the number of woken
exclusive waiters from __wake_up() to facilitate that.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221115224553.23594-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a queue is awaken, the wake_index written by sbq_wake_ptr currently
keeps pointing to the same queue. On the next wake up, it will thus
retry the same queue, which is unfair to other queues, and can lead to
starvation. This patch, moves the index update to happen before the
queue is returned, such that it will now try a different queue first on
the next wake up, improving fairness.
Fixes: 4f8126bb23 ("sbitmap: Use single per-bitmap counting to wake up queued tags")
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20221115224553.23594-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While the block device code should switch to implementing
->writepages instead of ->writepage eventually, the current
implementation is entirely pointless as it does the same looping over
->writepage as the generic code if no ->writepages is present.
Remove blkdev_writepages so that we can eventually unexport
generic_writepages.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221116132035.2192924-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch extends REQ_ALLOC_CACHE to IRQ completions, whenever
currently it's only limited to iopoll. Instead of guarding the list with
irq toggling on alloc, which is expensive, it keeps an additional
irq-safe list from which bios are spliced in batches to ammortise
overhead. On the put side it toggles irqs, but in many cases they're
already disabled and so cheap.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c2306de96b900ab9264f4428ec37768ddcf0da36.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Biosets keep a mempool, so as long as requests complete we can always
can allocate and have forward progress. Percpu bio caches break that
assumptions as we may complete into the cache of one CPU and after try
and fail to allocate with another CPU. We also can't grab from another
CPU's cache without tricky sync.
If we're allocating with a bio while the mempool is undersaturated,
remove REQ_ALLOC_CACHE flag, so on put it will go straight to mempool.
It might try to free into mempool more requests than required, but
assuming than there is no memory starvation in the system it'll
stabilise and never hit that path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/aa150caf9c263fa92269e86d7826cc8fa65f38de.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce a helper mempool_is_saturated(), which tells if the mempool is
under-filled or not. We need it to figure out whether it should be
freed right into the mempool or could be cached with top level caches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/636aed30be8c35d78f45e244998bc6209283cccc.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull MD fixes from Song.
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid1: stop mdx_raid1 thread when raid1 array run failed
md/raid5: use bdev_write_cache instead of open coding it
md: fix a crash in mempool_free
md/raid0, raid10: Don't set discard sectors for request queue
md/bitmap: Fix bitmap chunk size overflow issues
md: introduce md_ro_state
md: factor out __md_set_array_info()
lib/raid6: drop RAID6_USE_EMPTY_ZERO_PAGE
raid5-cache: use try_cmpxchg in r5l_wake_reclaim
drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
Use the bdev_write_cache instead of two equivalent open coded checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
- limit bitmap chunk size internal u64 variable to values not overflowing
the u32 bitmap superblock structure variable stored on persistent media
- assign bitmap chunk size internal u64 variable from unsigned values to
avoid possible sign extension artifacts when assigning from a s32 value
The bug has been there since at least kernel 4.0.
Steps to reproduce it:
1: mdadm -C /dev/mdx -l 1 --bitmap=internal --bitmap-chunk=256M -e 1.2
-n2 /dev/rnbd1 /dev/rnbd2
2 resize member device rnbd1 and rnbd2 to 8 TB
3 mdadm --grow /dev/mdx --size=max
The bitmap_chunksize will overflow without patch.
Cc: stable@vger.kernel.org
Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Song Liu <song@kernel.org>
RAID6_USE_EMPTY_ZERO_PAGE is unused and hardcoded to 0, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
r5l_wake_reclaim. 86 CMPXCHG instruction returns success in ZF flag, so
this change saves a compare after cmpxchg (and related move instruction in
front of cmpxchg).
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails. There is no need to re-read the value in the loop.
Note that the value from *ptr should be read using READ_ONCE to prevent
the compiler from merging, refetching or reordering the read.
No functional change intended.
Cc: Song Liu <song@kernel.org>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Song Liu <song@kernel.org>
Check the return value of md_bitmap_get_counter() in case it returns
NULL pointer, which will result in a null pointer dereference.
v2: update the check to include other dereference
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: Song Liu <song@kernel.org>
sbitmap suffers from code complexity, as demonstrated by recent fixes,
and eventual lost wake ups on nested I/O completion. The later happens,
from what I understand, due to the non-atomic nature of the updates to
wait_cnt, which needs to be subtracted and eventually reset when equal
to zero. This two step process can eventually miss an update when a
nested completion happens to interrupt the CPU in between the wait_cnt
updates. This is very hard to fix, as shown by the recent changes to
this code.
The code complexity arises mostly from the corner cases to avoid missed
wakes in this scenario. In addition, the handling of wake_batch
recalculation plus the synchronization with sbq_queue_wake_up is
non-trivial.
This patchset implements the idea originally proposed by Jan [1], which
removes the need for the two-step updates of wait_cnt. This is done by
tracking the number of completions and wakeups in always increasing,
per-bitmap counters. Instead of having to reset the wait_cnt when it
reaches zero, we simply keep counting, and attempt to wake up N threads
in a single wait queue whenever there is enough space for a batch.
Waking up less than batch_wake shouldn't be a problem, because we
haven't changed the conditions for wake up, and the existing batch
calculation guarantees at least enough remaining completions to wake up
a batch for each queue at any time.
Performance-wise, one should expect very similar performance to the
original algorithm for the case where there is no queueing. In both the
old algorithm and this implementation, the first thing is to check
ws_active, which bails out if there is no queueing to be managed. In the
new code, we took care to avoid accounting completions and wakeups when
there is no queueing, to not pay the cost of atomic operations
unnecessarily, since it doesn't skew the numbers.
For more interesting cases, where there is queueing, we need to take
into account the cross-communication of the atomic operations. I've
been benchmarking by running parallel fio jobs against a single hctx
nullb in different hardware queue depth scenarios, and verifying both
IOPS and queueing.
Each experiment was repeated 5 times on a 20-CPU box, with 20 parallel
jobs. fio was issuing fixed-size randwrites with qd=64 against nullb,
varying only the hardware queue length per test.
queue size 2 4 8 16 32 64
6.1-rc2 1681.1K (1.6K) 2633.0K (12.7K) 6940.8K (16.3K) 8172.3K (617.5K) 8391.7K (367.1K) 8606.1K (351.2K)
patched 1721.8K (15.1K) 3016.7K (3.8K) 7543.0K (89.4K) 8132.5K (303.4K) 8324.2K (230.6K) 8401.8K (284.7K)
The following is a similar experiment, ran against a nullb with a single
bitmap shared by 20 hctx spread across 2 NUMA nodes. This has 40
parallel fio jobs operating on the same device
queue size 2 4 8 16 32 64
6.1-rc2 1081.0K (2.3K) 957.2K (1.5K) 1699.1K (5.7K) 6178.2K (124.6K) 12227.9K (37.7K) 13286.6K (92.9K)
patched 1081.8K (2.8K) 1316.5K (5.4K) 2364.4K (1.8K) 6151.4K (20.0K) 11893.6K (17.5K) 12385.6K (18.4K)
It has also survived blktests and a 12h-stress run against nullb. I also
ran the code against nvme and a scsi SSD, and I didn't observe
performance regression in those. If there are other tests you think I
should run, please let me know and I will follow up with results.
[1] https://lore.kernel.org/all/aef9de29-e9f5-259a-f8be-12d1b734e72@google.com/
Cc: Hugh Dickins <hughd@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Liu Song <liusong@linux.alibaba.com>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20221105231055.25953-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use set->nr_hw_queues for the current number of tags, and remove the
duplicate set->nr_hw_queues update in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221109100811.2413423-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no point in trying to share any code with the realloc case when
all that is needed by the initial tagset allocation is a simple
kcalloc_node.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221109100811.2413423-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
oom_bfqq is just a fallback bfqq, so shouldn't be used with waker
detection.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221108181030.1611703-2-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This fixes crashes in bfq_add_bfqq_busy due to waker_bfqq being NULL,
but woken_list_node still being hashed. This would happen when
bfq_init_rq() expects a brand new allocated queue to be returned from
bfq_get_bfqq_handle_split() and unconditionally updates waker_bfqq
without resetting woken_list_node. Since we can always return oom_bfqq
when attempting to allocate, we cannot assume waker_bfqq starts as NULL.
Avoid setting woken_bfqq for oom_bfqq entirely, as it's not useful.
Crashes would have a stacktrace like:
[160595.656560] bfq_add_bfqq_busy+0x110/0x1ec
[160595.661142] bfq_add_request+0x6bc/0x980
[160595.666602] bfq_insert_request+0x8ec/0x1240
[160595.671762] bfq_insert_requests+0x58/0x9c
[160595.676420] blk_mq_sched_insert_request+0x11c/0x198
[160595.682107] blk_mq_submit_bio+0x270/0x62c
[160595.686759] __submit_bio_noacct_mq+0xec/0x178
[160595.691926] submit_bio+0x120/0x184
[160595.695990] ext4_mpage_readpages+0x77c/0x7c8
[160595.701026] ext4_readpage+0x60/0xb0
[160595.705158] filemap_read_page+0x54/0x114
[160595.711961] filemap_fault+0x228/0x5f4
[160595.716272] do_read_fault+0xe0/0x1f0
[160595.720487] do_fault+0x40/0x1c8
Tested by injecting random failures into bfq_get_queue, crashes go away
completely.
Fixes: 8ef3fc3a04 ("block, bfq: make shared queues inherit wakers")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221108181030.1611703-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(Sort of) cherry-picked from the out-of-tree drbd9 branch. Original
commit message by Joel Colledge:
This simplifies drbd_submit_peer_request by removing most of the
arguments. It also makes the treatment of the op better aligned with
that in struct bio.
Determine fault_type dynamically using information which is already
available instead of passing it in as a parameter.
Note: The opf in receive_rs_deallocated was changed from
REQ_OP_WRITE_ZEROES to REQ_OP_DISCARD. This was required in the
out-of-tree module, and does not matter in-tree. The opf is ignored
anyway in drbd_submit_peer_request, since the discard/zero-out is
decided by the EE_TRIM flag.
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221109133453.51652-4-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The discard_granularity describes the minimum unit of a discard.
If that is larger than the maximal discard size, we need to disable
discards completely.
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221109133453.51652-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently only set q->limits.max_discard_sectors, but that is not
enough. Another field, max_hw_discard_sectors, was introduced in
commit 0034af0365 ("block: make /sys/block/<dev>/queue/discard_max_bytes
writeable").
The difference is that max_discard_sectors can be changed from user
space via sysfs, while max_hw_discard_sectors is the "hardware" upper
limit.
So use this helper, which sets both.
This is also a fixup for commit 998e9cbcd6 ("drbd: cleanup
decide_on_discard_support"): if discards are not supported, that does
not necessarily mean we also want to disable write_zeroes.
Fixes: 998e9cbcd6 ("drbd: cleanup decide_on_discard_support")
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221109133453.51652-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add documentation for the p2pmem/allocate binary file which allows
for allocating p2pmem buffers in userspace for passing to drivers
that support them. (Currently only O_DIRECT to NVMe devices.)
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221021174116.7200-10-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create a sysfs bin attribute called "allocate" under the existing
"p2pmem" group. The only allowable operation on this file is the mmap()
call.
When mmap() is called on this attribute, the kernel allocates a chunk of
memory from the genalloc and inserts the pages into the VMA. The
dev_pagemap .page_free callback will indicate when these pages are no
longer used and they will be put back into the genalloc.
On device unbind, remove the sysfs file before the memremap_pages are
cleaned up. This ensures unmap_mapping_range() is called on the files
inode and no new mappings can be created.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221021174116.7200-9-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a bio's queue supports PCI P2PDMA, set FOLL_PCI_P2PDMA for
iov_iter_get_pages_flags(). This allows PCI P2PDMA pages to be
passed from userspace and enables the NVMe passthru requests to
use P2PDMA pages.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221021174116.7200-8-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a bio's queue supports PCI P2PDMA, set FOLL_PCI_P2PDMA for
iov_iter_get_pages_flags(). This allows PCI P2PDMA pages to be passed
from userspace and enables the O_DIRECT path in iomap based filesystems
and direct to block devices.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221021174116.7200-7-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consecutive zone device pages should not be merged into the same sgl
or bvec segment with other types of pages or if they belong to different
pgmaps. Otherwise getting the pgmap of a given segment is not possible
without scanning the entire segment. This helper returns true either if
both pages are not zone device pages or both pages are zone device
pages with the same pgmap.
Factor out the check for page mergability into a pages_are_mergable()
helper and add a check with zone_device_pages_are_mergeable().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221021174116.7200-6-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consecutive zone device pages should not be merged into the same sgl
or bvec segment with other types of pages or if they belong to different
pgmaps. Otherwise getting the pgmap of a given segment is not possible
without scanning the entire segment. This helper returns true either if
both pages are not zone device pages or both pages are zone device
pages with the same pgmap.
Add a helper to determine if zone device pages are mergeable and use
this helper in page_is_mergeable().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221021174116.7200-5-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add iov_iter_get_pages_flags() and iov_iter_get_pages_alloc_flags()
which take a flags argument that is passed to get_user_pages_fast().
This is so that FOLL_PCI_P2PDMA can be passed when appropriate.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221021174116.7200-4-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
GUP Callers that expect PCI P2PDMA pages can now set FOLL_PCI_P2PDMA to
allow obtaining P2PDMA pages. If GUP is called without the flag and a
P2PDMA page is found, it will return an error in try_grab_page() or
try_grab_folio().
The check is safe to do before taking the reference to the page in both
cases seeing the page should be protected by either the appropriate
ptl or mmap_lock; or the gup fast guarantees preventing TLB flushes.
try_grab_folio() has one call site that WARNs on failure and cannot
actually deal with the failure of this function (it seems it will
get into an infinite loop). Expand the comment there to document a
couple more conditions on why it will not fail.
FOLL_PCI_P2PDMA cannot be set if FOLL_LONGTERM is set. This is to copy
fsdax until pgmap refcounts are fixed (see the link below for more
information).
Link: https://lkml.kernel.org/r/Yy4Ot5MoOhsgYLTQ@ziepe.ca
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221021174116.7200-3-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to add checks for P2PDMA memory into try_grab_page(), expand
the error return from a bool to an int/error code. Update all the
callsites handle change in usage.
Also remove the WARN_ON_ONCE() call at the callsites seeing there
already is a WARN_ON_ONCE() inside the function if it fails.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221021174116.7200-2-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the description of @required_features in elevator_match()
to clear the below warning:
block/elevator.c:103: warning: Excess function parameter 'required_features' description in 'elevator_match'
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2734
Fixes: ffb86425ee ("block: don't check for required features in elevator_match")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221107062255.2685-1-yang.lee@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
