Update the compatible for the Realtek RTL8821CS bluetooth node.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There are a number of updates for devicetree files for Qualcomm,
Rockchips, and NXP i.MX platforms, addressing mistakes in the DT
contents:
- Wrong GPIO polarity on some boards
- Lower SD card interface speed for better stability
- Incorrect power supply, clock, pmic, cache properties
- Disable broken hbr3 on sc7280-herobrine
- Devicetree warning fixes
The only other changes are:
- A regression fix for the Amlogic performance monitoring unit driver,
along with two related DT changes.
- imx_v6_v7_defconfig enables PCI support again.
- Trivial fixes for tee, optee and psci firmware drivers, addressing
compiler warning and error output
-----BEGIN PGP SIGNATURE-----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=5Uki
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of updates for devicetree files for Qualcomm,
Rockchips, and NXP i.MX platforms, addressing mistakes in the DT
contents:
- Wrong GPIO polarity on some boards
- Lower SD card interface speed for better stability
- Incorrect power supply, clock, pmic, cache properties
- Disable broken hbr3 on sc7280-herobrine
- Devicetree warning fixes
The only other changes are:
- A regression fix for the Amlogic performance monitoring unit
driver, along with two related DT changes.
- imx_v6_v7_defconfig enables PCI support again.
- Trivial fixes for tee, optee and psci firmware drivers, addressing
compiler warning and error output"
* tag 'arm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
firmware/psci: demote suspend-mode warning to info level
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
arm64: dts: imx8mp-verdin: correct off-on-delay
arm64: dts: imx8mm-verdin: correct off-on-delay
arm64: dts: imx8mm-evk: correct pmic clock source
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
tee: Pass a pointer to virt_to_page()
perf/amlogic: adjust register offsets
arm64: dts: meson-g12-common: resolve conflict between canvas & pmu
arm64: dts: meson-g12-common: specify full DMC range
arm64: dts: imx8mp: fix address length for LCDIF2
riscv: dts: canaan: drop invalid spi-max-frequency
...
The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had
to be corrected in the driver, this fixes the polarity in the DeviceTree
for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630.
The recent rearrangement of nodes among the IPQ8074 accidentally enabled
the PCIe PHYs, rather than the PCIe controllers. This is being
corrected, to restore PCIe functionality.
PMK8280 PON node has the wrong compatible, which recently caused the
driver to stop probing. This is corrected and the required "pbs" region
is added.
With support for HBR3 introduced, it's noted that SC7280 Herobrine
devices are having trouble running at this rate. This drops the claim
that it's supported, until further analysis can be done.
-----BEGIN PGP SIGNATURE-----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=3Uaf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ikZD
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
A few more Qualcomm ARM64 DeviceTree fixes for 6.3
The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had
to be corrected in the driver, this fixes the polarity in the DeviceTree
for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630.
The recent rearrangement of nodes among the IPQ8074 accidentally enabled
the PCIe PHYs, rather than the PCIe controllers. This is being
corrected, to restore PCIe functionality.
PMK8280 PON node has the wrong compatible, which recently caused the
driver to stop probing. This is corrected and the required "pbs" region
is added.
With support for HBR3 introduced, it's noted that SC7280 Herobrine
devices are having trouble running at this rate. This drops the claim
that it's supported, until further analysis can be done.
* tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY node
arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node
arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO polarity
Link: https://lore.kernel.org/r/20230410153850.4752-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmQx/6UQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgYMiB/45skI/LcajSjuqIJpAC+cDeCs/IaQb6aev
4fnwBRYgb836JvThTGeOn4KRe2avnZMfyjn3IlkHhYBHtLukS8jcuNuU+T+oD1/n
Yss63kUSbMCvNl13uCSz/dqsaFZJ1x8hHth0b19PlGWnnBgtzWWWScr371m+PsF6
2x2dnteRvQcUyWa8/5Xavgc8bseMds2SiKEc9Y58MTwRVL/pqfh9AFJhsWRJYFsN
x0SU+Gwopg2qW+Mfdm6DOK1m08Vu6Uaw1zftF06/oAnDqvYMiVSWfsFIpW5eEi/T
kb5ovzTTDwnLz/n8jkG1ldB7hQY362NQjyIc/GoUab/03yxyFE63
=JS4f
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Yjl8
-----END PGP SIGNATURE-----
Merge tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
* tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
arm64: dts: rockchip: add rk3588 cache level information
arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro
arm64: dts: rockchip: Lower sd speed on rk3566-soquartz
ARM: dts: rockchip: fix a typo error for rk3288 spdif node
arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name
Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Not all that quiet given spring celebrations, but "current" fixes
are thinning out, which is encouraging. One outstanding regression
in the mlx5 driver when using old FW, not blocking but we're pushing
for a fix.
Current release - new code bugs:
- eth: enetc: workaround for unresponsive pMAC after receiving
express traffic
Previous releases - regressions:
- rtnetlink: restore RTM_NEW/DELLINK notification behavior,
keep the pid/seq fields 0 for backward compatibility
Previous releases - always broken:
- sctp: fix a potential overflow in sctp_ifwdtsn_skip
- mptcp:
- use mptcp_schedule_work instead of open-coding it and make
the worker check stricter, to avoid scheduling work on closed
sockets
- fix NULL pointer dereference on fastopen early fallback
- skbuff: fix memory corruption due to a race between skb coalescing
and releasing clones confusing page_pool reference counting
- bonding: fix neighbor solicitation validation on backup slaves
- bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp
- bpf: arm64: fixed a BTI error on returning to patched function
- openvswitch: fix race on port output leading to inf loop
- sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
returning a different errno than expected
- phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove
- Bluetooth: fix printing errors if LE Connection times out
- Bluetooth: assorted UaF, deadlock and data race fixes
- eth: macb: fix memory corruption in extended buffer descriptor mode
Misc:
- adjust the XDP Rx flow hash API to also include the protocol layers
over which the hash was computed
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=W+J2
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, and bluetooth.
Not all that quiet given spring celebrations, but "current" fixes are
thinning out, which is encouraging. One outstanding regression in the
mlx5 driver when using old FW, not blocking but we're pushing for a
fix.
Current release - new code bugs:
- eth: enetc: workaround for unresponsive pMAC after receiving
express traffic
Previous releases - regressions:
- rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the
pid/seq fields 0 for backward compatibility
Previous releases - always broken:
- sctp: fix a potential overflow in sctp_ifwdtsn_skip
- mptcp:
- use mptcp_schedule_work instead of open-coding it and make the
worker check stricter, to avoid scheduling work on closed
sockets
- fix NULL pointer dereference on fastopen early fallback
- skbuff: fix memory corruption due to a race between skb coalescing
and releasing clones confusing page_pool reference counting
- bonding: fix neighbor solicitation validation on backup slaves
- bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp
- bpf: arm64: fixed a BTI error on returning to patched function
- openvswitch: fix race on port output leading to inf loop
- sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
returning a different errno than expected
- phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove
- Bluetooth: fix printing errors if LE Connection times out
- Bluetooth: assorted UaF, deadlock and data race fixes
- eth: macb: fix memory corruption in extended buffer descriptor mode
Misc:
- adjust the XDP Rx flow hash API to also include the protocol layers
over which the hash was computed"
* tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
xdp: rss hash types representation
selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
skbuff: Fix a race between coalescing and releasing SKBs
net: macb: fix a memory corruption in extended buffer descriptor mode
selftests: add the missing CONFIG_IP_SCTP in net config
udp6: fix potential access to stale information
selftests: openvswitch: adjust datapath NL message declaration
selftests: mptcp: userspace pm: uniform verify events
mptcp: fix NULL pointer dereference on fastopen early fallback
mptcp: stricter state check in mptcp_worker
mptcp: use mptcp_schedule_work instead of open-coding it
net: enetc: workaround for unresponsive pMAC after receiving express traffic
sctp: fix a potential overflow in sctp_ifwdtsn_skip
net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
rtnetlink: Restore RTM_NEW/DELLINK notification behavior
net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
...
* Ensure the guest PMU context is restored before the first KVM_RUN,
fixing an issue where EL0 event counting is broken after vCPU
save/restore
* Actually initialize ID_AA64PFR0_EL1.{CSV2,CSV3} based on the
sanitized, system-wide values for protected VMs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmQ0944UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO3mAf8CpzKs1SSfx4OpH1rPHgnZBmMyb9x
cJe+W330RCuM96sUXFah7kealS8KIVLFk1E1k2gUIKBtm7cExWeWm6NFpazeu4aT
c4R6dOGoXZ9i0E0l807onh0NCZp/cV6FnTnfYnS44Re6Bpo1V7QODP8cVWww1IIK
w+4I4Fvcz/ensjgzh8z3h6o0Jz8YWWgAS17Vcic6ezVCEX5HC1sltXB9y1NKMduc
vYvT7At8Rb4GhqvfCfsAiNW7iV5dftZe5LHup0Rd6FmzvQGkaTGd7aoekf46IQV2
Kl7yNpOH6GAUjxCjf8Dvfat4IsFsrfTESGPI15s0cS9BG2d1dXzwLVcHaQ==
=bYva
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two ARM fixes:
- Ensure the guest PMU context is restored before the first KVM_RUN,
fixing an issue where EL0 event counting is broken after vCPU
save/restore
- Actually initialize ID_AA64PFR0_EL1.{CSV2,CSV3} based on the
sanitized, system-wide values for protected VMs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Advertise ID_AA64PFR0_EL1.CSV2/3 to protected VMs
KVM: arm64: PMU: Restore the guest's EL0 event counting after migration
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZDCaHgAKCRDbK58LschI
g2CXAP9sgjqCaRhfSSYWbESKWxokJAa1j6v7phNjR9iqHrBjzwEAg6aDHOUqcYpD
Zlp/5JV9HIkc1wTmuIUuI74YAVZBJAU=
=V2jo
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-04-08
We've added 4 non-merge commits during the last 11 day(s) which contain
a total of 5 files changed, 39 insertions(+), 6 deletions(-).
The main changes are:
1) Fix BPF TCP socket iterator to use correct helper for dropping
socket's refcount, that is, sock_gen_put instead of sock_put,
from Martin KaFai Lau.
2) Fix a BTI exception splat in BPF trampoline-generated code on arm64,
from Xu Kuohai.
3) Fix a LongArch JIT error from missing BPF_NOSPEC no-op, from George Guo.
4) Fix dynamic XDP feature detection of veth in xdp_redirect selftest,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: fix xdp_redirect xdp-features selftest for veth driver
bpf, arm64: Fixed a BTI error on returning to patched function
LoongArch, bpf: Fix jit to skip speculation barrier opcode
bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp
====================
Link: https://lore.kernel.org/r/20230407224642.30906-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are some interop issues seen across a few DP monitors with
HBR3 and herobrine boards where the DP display stays blank with hbr3.
This is still under investigation but in preparation for supporting
higher resolutions, its better to disable HBR3 till the issues are
root-caused as there is really no guarantee which monitors will show
the issue and which would not.
This can be enabled back after successful validation across more DP
sinks.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230329233416.27152-1-quic_abhinavk@quicinc.com
- Ensure the guest PMU context is restored before the first KVM_RUN,
fixing an issue where EL0 event counting is broken after vCPU
save/restore
- Actually initialize ID_AA64PFR0_EL1.{CSV2,CSV3} based on the
sanitized, system-wide values for protected VMs
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZC2ZbwAKCRCivnWIJHzd
FvovAP9aooqUBBs8w2myh8SXCv7dJOg88r6fKS5vCqMdkY7OhwD9GXA7hWU2dXdy
X1L8qq6C7R+GtIY/kDm9E2HkNKg7rQc=
=nfXd
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #3
- Ensure the guest PMU context is restored before the first KVM_RUN,
fixing an issue where EL0 event counting is broken after vCPU
save/restore
- Actually initialize ID_AA64PFR0_EL1.{CSV2,CSV3} based on the
sanitized, system-wide values for protected VMs
The Anbernic and Odroid Go have different panels and take differently
named supplies, so move all the supplies to DTS defining actual panel to
fix warnings like:
rk3326-odroid-go3.dtb: panel@0: 'IOVCC-supply' is a required property
rk3326-odroid-go3.dtb: panel@0: 'iovcc-supply', 'vdd-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
rk3399-rockpro64.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
There is only one endpoint, so use simpler form without "reg".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
rk3399-pinebook-pro.dtb: edp-panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Dan reports that smatch complains about a potential uninitialized
variable being used in the compat alignment fixup code.
The logic is not wrong per se, but we do end up using an uninitialized
variable if reading the instruction that triggered the alignment fault
from user space faults, even if the fault ensures that the uninitialized
value doesn't propagate any further.
Given that we just give up and return 1 if any fault occurs when reading
the instruction, let's get rid of the 'success handling' pattern that
captures the fault in a variable and aborts later, and instead, just
return 1 immediately if any of the get_user() calls result in an
exception.
Fixes: 3fc24ef32d ("arm64: compat: Implement misalignment fixups for multiword loads")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202304021214.gekJ8yRc-lkp@intel.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230404103625.2386382-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The property should be off-on-delay-us, not off-on-delay
Fixes: a39ed23bdf ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The property should be off-on-delay-us, not off-on-delay
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The osc_32k supports #clock-cells as 0, using an id is wrong, drop it.
Fixes: a6a355ede5 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The pmk8280 PMIC PON peripheral is gen3 and uses two sets of registers;
hlos and pbs.
This specifically fixes the following error message during boot when the
pbs registers are not defined:
PON_PBS address missing, can't read HW debounce time
Note that this also enables the spurious interrupt workaround introduced
by commit 0b65118e6b ("Input: pm8941-pwrkey - add software key press
debouncing support") (which may or may not be needed).
Fixes: ccd3517faf ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327122948.4323-1-johan+linaro@kernel.org
The existing pKVM code attempts to advertise CSV2/3 using values
initialized to 0, but never set. To advertise CSV2/3 to protected
guests, pass the CSV2/3 values to hyp when initializing hyp's
view of guests' ID_AA64PFR0_EL1.
Similar to non-protected KVM, these are system-wide, rather than
per cpu, for simplicity.
Fixes: 6c30bfb18d ("KVM: arm64: Add handlers for protected VM System Registers")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20230404152321.413064-1-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When BPF_TRAMP_F_CALL_ORIG is set, BPF trampoline uses BLR to jump
back to the instruction next to call site to call the patched function.
For BTI-enabled kernel, the instruction next to call site is usually
PACIASP, in this case, it's safe to jump back with BLR. But when
the call site is not followed by a PACIASP or bti, a BTI exception
is triggered.
Here is a fault log:
Unhandled 64-bit el1h sync exception on CPU0, ESR 0x0000000034000002 -- BTI
CPU: 0 PID: 263 Comm: test_progs Tainted: GF
Hardware name: linux,dummy-virt (DT)
pstate: 40400805 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c)
pc : bpf_fentry_test1+0xc/0x30
lr : bpf_trampoline_6442573892_0+0x48/0x1000
sp : ffff80000c0c3a50
x29: ffff80000c0c3a90 x28: ffff0000c2e6c080 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000050
x23: 0000000000000000 x22: 0000ffffcfd2a7f0 x21: 000000000000000a
x20: 0000ffffcfd2a7f0 x19: 0000000000000000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffcfd2a7f0
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: ffff80000914f5e4 x9 : ffff8000082a1528
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0101010101010101
x5 : 0000000000000000 x4 : 00000000fffffff2 x3 : 0000000000000001
x2 : ffff8001f4b82000 x1 : 0000000000000000 x0 : 0000000000000001
Kernel panic - not syncing: Unhandled exception
CPU: 0 PID: 263 Comm: test_progs Tainted: GF
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0xec/0x144
show_stack+0x24/0x7c
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
panic+0x1cc/0x3ec
__el0_error_handler_common+0x0/0x130
el1h_64_sync_handler+0x60/0xd0
el1h_64_sync+0x78/0x7c
bpf_fentry_test1+0xc/0x30
bpf_fentry_test1+0xc/0x30
bpf_prog_test_run_tracing+0xdc/0x2a0
__sys_bpf+0x438/0x22a0
__arm64_sys_bpf+0x30/0x54
invoke_syscall+0x78/0x110
el0_svc_common.constprop.0+0x6c/0x1d0
do_el0_svc+0x38/0xe0
el0_svc+0x30/0xd0
el0t_64_sync_handler+0x1ac/0x1b0
el0t_64_sync+0x1a0/0x1a4
Kernel Offset: disabled
CPU features: 0x0000,00034c24,f994fdab
Memory Limit: none
And the instruction next to call site of bpf_fentry_test1 is ADD,
not PACIASP:
<bpf_fentry_test1>:
bti c
nop
nop
add w0, w0, #0x1
paciasp
For BPF prog, JIT always puts a PACIASP after call site for BTI-enabled
kernel, so there is no problem. To fix it, replace BLR with RET to bypass
the branch target check.
Fixes: efc9909fdc ("bpf, arm64: Add bpf trampoline for arm64")
Reported-by: Florent Revest <revest@chromium.org>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Florent Revest <revest@chromium.org>
Acked-by: Florent Revest <revest@chromium.org>
Link: https://lore.kernel.org/bpf/20230401234144.3719742-1-xukuohai@huaweicloud.com
When introduced, IRQFD resampling worked on POWER8 with XICS. However
KVM on POWER9 has never implemented it - the compatibility mode code
("XICS-on-XIVE") misses the kvm_notify_acked_irq() call and the native
XIVE mode does not handle INTx in KVM at all.
This moved the capability support advertising to platforms and stops
advertising it on XIVE, i.e. POWER9 and later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220504074807.3616813-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
guests.
-----BEGIN PGP SIGNATURE-----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=Ysma
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
A small fix that repairs the external loop detection code for PV
guests.
There is neither a driver that parses this nor a DT binding schema that
documents it, so let's remove from the DTS files that make use of this.
The properties that exist are post-pwm-on-delay-ms and pwm-off-delay-ms,
defined in the pwm-backlight DT binding. If the delays are really needed
then those properties should be used instead.
Brian Norris mentioned though that looking at the first downstream usage
of the pwm-delay-us property for RK3399 Gru systems in ChromiumOS tree,
he couldn't find a spec reference that said that this was really needed.
So perhaps it was unnecessary added and a simple removal would be enough.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20230330231924.2404747-1-javierm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
For the Anbernic devices to display properly, we need to specify the
clock frequency of the PLL_VPLL. Adding the parent clock in the
rk356x.dtsi requires us to update our clock definitions to accomplish
this.
Fixes: 64b69474ed ("arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230327153547.821822-1-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently, with VHE, KVM enables the EL0 event counting for the
guest on vcpu_load() or KVM enables it as a part of the PMU
register emulation process, when needed. However, in the migration
case (with VHE), the same handling is lacking, as vPMU register
values that were restored by userspace haven't been propagated yet
(the PMU events haven't been created) at the vcpu load-time on the
first KVM_RUN (kvm_vcpu_pmu_restore_guest() called from vcpu_load()
on the first KVM_RUN won't do anything as events_{guest,host} of
kvm_pmu_events are still zero).
So, with VHE, enable the guest's EL0 event counting on the first
KVM_RUN (after the migration) when needed. More specifically,
have kvm_pmu_handle_pmcr() call kvm_vcpu_pmu_restore_guest()
so that kvm_pmu_handle_pmcr() on the first KVM_RUN can take
care of it.
Fixes: d0c94c4979 ("KVM: arm64: Restore PMU configuration on first run")
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20230329023944.2488484-1-reijiw@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* Fix VM hang in case of timer delta being zero
ARM:
* Fixes for the MMU:
* Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
* Disable interrupts when walking user page tables to protect against
the page table being freed
* Read the MTE permissions for the VMA within the mmap lock critical
section, avoiding the use of a potentally stale VMA pointer
* Fixes for the vPMU:
* Return the sum of the current perf event value and PMC snapshot for
reads from userspace
* Don't save the value of guest writes to PMCR_EL0.{C,P}, which could
otherwise lead to userspace erroneously resetting the vPMU during VM
save/restore
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmQh12wUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMPyAgAhe9P5efFlkg/N/BUoxCdiQjhTEGO
BbNtZFbSgdqsTA0No5sjSsq8+dYuj4IpYHxvTRNXffxpn/6x736x9ff6fH3QwY0P
n65q37m3XrBzbaUv2XlX6l4GJC/KHWpXsawVszmnQpw8wYUYglo9JWnWVvpo/vLV
byWXcG9Rt0MQVnV13bYtjnpdNYCdVuhZuvjDBvbBa2I9BRKShvWyzcRcc48K1RNq
UI5PCEb8c2NUOB/6b9lRkEaNYLssVLOxpI3abGJP+IVSl/WE+hgCbFpz7ZkYwt79
AYm4wnZTSKBMQb5P2IOlgkfasvEyFiZ4Jj7x3RLXcXSWIB6g0J20iNasYg==
=qX9k
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix VM hang in case of timer delta being zero
ARM:
- MMU fixes:
- Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
- Disable interrupts when walking user page tables to protect
against the page table being freed
- Read the MTE permissions for the VMA within the mmap lock
critical section, avoiding the use of a potentally stale VMA
pointer
- vPMU fixes:
- Return the sum of the current perf event value and PMC snapshot
for reads from userspace
- Don't save the value of guest writes to PMCR_EL0.{C,P}, which
could otherwise lead to userspace erroneously resetting the vPMU
during VM save/restore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
riscv/kvm: Fix VM hang in case of timer delta being zero.
KVM: arm64: Check for kvm_vma_mte_allowed in the critical section
KVM: arm64: Disable interrupts while walking userspace PTs
KVM: arm64: Retry fault if vma_lookup() results become invalid
KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU
KVM: arm64: PMU: Fix GET_ONE_REG for vPMC regs to return the current value
According to S905X2 Datasheet - Revision 07:
DMC_MON area spans 0xff638080-0xff6380c0
DDR_PLL area spans 0xff638c00-0xff638c34
Round DDR_PLL area size up to 0x40
Fixes: 90cf8e2101 ("arm64: dts: meson: Add DDR PMU node")
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230327120932.2158389-3-mgonzalez@freebox.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
According to S905X2 Datasheet - Revision 07:
DRAM Memory Controller (DMC) register area spans ff638000-ff63a000.
According to DeviceTree Specification - Release v0.4-rc1:
simple-bus nodes do not require reg property.
Fixes: 1499218c80 ("arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi")
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230327120932.2158389-2-mgonzalez@freebox.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
0x238 is the offset for PANIC0_THRES, so the length needs to be greater
than that. Use the size from memory map from reference manual.
Fixes: 94e6197dad ("arm64: dts: imx8mp: Add LCDIF2 & LDB nodes")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As usual, most of the bug fixes address issues in the devicetree files,
and out of these, most are for the Qualcomm and NXP platforms, including:
- A missing "reserved-memory" property on LG G Watch R that
is needed to prevent clashing with firmware
- Annotations for cache coherency on multiple machines
- Corrections for pinctrl, regulator, clock, iommu and power domain
properties for i.MX and Qualcomm to correctly reflect the
hardware settings
- Firmware file names on multiple machines
SA8540P Ride board
- An incompatible change to the qcom vadc driver requires adding
individual labels
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
and switch to the new bindings.
- A fix for PCI bus address translation Tegra194 and Tegra234.
There are also a couple of device driver fixes, addressing
- A race condition in the amdtee driver
- A performance regression in the Qualcomm 'llcc' driver
- An unitialized variable use NXP i.MX "weim" driver
- Error handling issues in Qualcomm "rmtfs", and "scm"
drivers and the Arm scmi firmware driver
-----BEGIN PGP SIGNATURE-----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=rKwy
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"As usual, most of the bug fixes address issues in the devicetree
files, and out of these, most are for the Qualcomm and NXP platforms,
including:
- A missing 'reserved-memory' property on LG G Watch R that is needed
to prevent clashing with firmware
- Annotations for cache coherency on multiple machines
- Corrections for pinctrl, regulator, clock, iommu and power domain
properties for i.MX and Qualcomm to correctly reflect the hardware
settings
- Firmware file names on multiple machines SA8540P Ride board
- An incompatible change to the qcom vadc driver requires adding
individual labels
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
and switch to the new bindings.
- A fix for PCI bus address translation Tegra194 and Tegra234.
There are also a couple of device driver fixes, addressing:
- A race condition in the amdtee driver
- A performance regression in the Qualcomm 'llcc' driver
- An unitialized variable use NXP i.MX 'weim' driver
- Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and
the Arm scmi firmware driver"
* tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
bus: imx-weim: fix branch condition evaluates to a garbage value
arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
arm64: dts: imx93: Fix eqos properties
arm64: dts: imx8mp: Fix LCDIF2 node clock order
arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
firmware: qcom: scm: fix bogus irq error at probe
arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
...
- Set the NX compat flag for arm64 and zboot, to ensure compatibility
with EFI firmware that complies with tightening requirements imposed
across the ecosystem.
- Improve identification of Ampere Altra systems based on SMBIOS data.
- Fix some issues related to the EFI framebuffer that were introduced
as a result from some refactoring related to zboot and the merge with
sysfb.
- Makefile tweak to avoid rebuilding vmlinuz unnecessarily.
- Fix efi_random_alloc() return value on out of memory condition.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZBxfeAAKCRAwbglWLn0t
XJzfAQCiRPMpm5YomKDLdAtjXfwEbyevlYN/gDInAdX5ETzPqgD/WDSEmj3cqh+V
Es3u5P/7ICC/qgCleq87qpUk0IPwEwo=
=u0Zg
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Set the NX compat flag for arm64 and zboot, to ensure compatibility
with EFI firmware that complies with tightening requirements imposed
across the ecosystem.
- Improve identification of Ampere Altra systems based on SMBIOS data.
- Fix some issues related to the EFI framebuffer that were introduced
as a result from some refactoring related to zboot and the merge with
sysfb.
- Makefile tweak to avoid rebuilding vmlinuz unnecessarily.
- Fix efi_random_alloc() return value on out of memory condition.
* tag 'efi-fixes-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: randomalloc: Return EFI_OUT_OF_RESOURCES on failure
efi/libstub: Use relocated version of kernel's struct screen_info
efi/libstub: zboot: Add compressed image to make targets
efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L
efi: sysfb_efi: Fix DMI quirks not working for simpledrm
efi/libstub: smbios: Drop unused 'recsize' parameter
arm64: efi: Use SMBIOS processor version to key off Ampere quirk
efi/libstub: smbios: Use length member instead of record struct size
efi: earlycon: Reprobe after parsing config tables
arm64: efi: Set NX compat flag in PE/COFF header
efi/libstub: arm64: Remap relocated image with strict permissions
efi/libstub: zboot: Mark zboot EFI application as NX compatible
This correct SIM card selection on the two newly introduced
MSM8916-based USB modems.
The firmware-name for the first CDSP is corrected on the SA8540P Ride
board.
The PCIe controller in SC7280 is marked cache-coherent, which resolves
seen data corruption issues.
Labels are added to the vadc channel nodes on SC8280XP, as the Linux
driver was updated to not include the unit address when generating
device names and collisions thereby prevented registration of the
channels. Audio clocks and routing is corrected and a few regulators are
marked always-on for the Lenovo Thinkpad X13s, as their clients are not
fully described at this point.
SPI5 was accidentally enabled by default on SM6115, and is disabled
again.
CDSP on SM6375 is provided its power-domains, to appropriately vote for
during power up for the DSP.
The iommu mask for the PCIe controllers in SM8150 is updated, to match
what the hypervisor expects.
Th Venus firmware path is corrected on Xiaomi Mi Pad 5 Pro.
The UFS controller is marked cache coherent on SM8350 and SM8450.
The clocks for the second WSA macro on SM8450 is corrected, and given
its own clocks.
The bias-pull-up value for I2C pins are corrected on SM8550, to trigger
the selection of the strong pull. CPU compatibles and the base address
of the LPASS TLMM block are corrected.
-----BEGIN PGP SIGNATURE-----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=9sTC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fCbE
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/fixes
Qualcomm ARM64 Devicetree fixes for v6.3
This correct SIM card selection on the two newly introduced
MSM8916-based USB modems.
The firmware-name for the first CDSP is corrected on the SA8540P Ride
board.
The PCIe controller in SC7280 is marked cache-coherent, which resolves
seen data corruption issues.
Labels are added to the vadc channel nodes on SC8280XP, as the Linux
driver was updated to not include the unit address when generating
device names and collisions thereby prevented registration of the
channels. Audio clocks and routing is corrected and a few regulators are
marked always-on for the Lenovo Thinkpad X13s, as their clients are not
fully described at this point.
SPI5 was accidentally enabled by default on SM6115, and is disabled
again.
CDSP on SM6375 is provided its power-domains, to appropriately vote for
during power up for the DSP.
The iommu mask for the PCIe controllers in SM8150 is updated, to match
what the hypervisor expects.
Th Venus firmware path is corrected on Xiaomi Mi Pad 5 Pro.
The UFS controller is marked cache coherent on SM8350 and SM8450.
The clocks for the second WSA macro on SM8450 is corrected, and given
its own clocks.
The bias-pull-up value for I2C pins are corrected on SM8550, to trigger
the selection of the strong pull. CPU compatibles and the base address
of the LPASS TLMM block are corrected.
* tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing
arm64: dts: qcom: sc8280xp-x13s: fix dmic sample rate
arm64: dts: qcom: sc8280xp: fix lpass tx macro clocks
arm64: dts: qcom: sc8280xp: fix rx frame shapping info
arm64: dts: qcom: sm8450: correct WSA2 assigned clocks
arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent
arm64: dts: qcom: msm8916-ufi: Fix sim card selection pinctrl
arm64: dts: qcom: sm8250-xiaomi-elish: Correct venus firmware path
arm64: dts: qcom: sm8550: Use correct CPU compatibles
arm64: dts: qcom: sm8550: Add bias pull up value to tlmm i2c data clk states
arm64: dts: qcom: sm6375: Add missing power-domain-named to CDSP
...
Link: https://lore.kernel.org/r/20230323141642.1085684-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Correct PCIe PHY enablement to refer the QMP device nodes rather than
PHY device nodes. QMP nodes have 'status = "disabled"' property in the
ipq8074.dtsi, while PHY nodes do not correspond to the actual device and
do not have the status property.
Fixes: 1ed34da63a ("arm64: dts: qcom: Add board support for HK10")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324021651.1799969-2-dmitry.baryshkov@linaro.org
Correct PCIe PHY enablement to refer the QMP device nodes rather than
PHY device nodes. QMP nodes have 'status = "disabled"' property in the
ipq8074.dtsi, while PHY nodes do not correspond to the actual device and
do not have the status property.
Fixes: e8a7fdc505 ("arm64: dts: ipq8074: qcom: Re-arrange dts nodes based on address")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324021651.1799969-1-dmitry.baryshkov@linaro.org
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high. Since Linux drivers were updated to
handle proper flag, correct the DTS.
The change is not backwards compatible with older Linux kernel.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-5-krzysztof.kozlowski@linaro.org
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high. Since Linux drivers were updated to
handle proper flag, correct the DTS.
The change is not backwards compatible with older Linux kernel.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-4-krzysztof.kozlowski@linaro.org
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high. Since Linux drivers were updated to
handle proper flag, correct the DTS.
The change is not backwards compatible with older Linux kernel.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-3-krzysztof.kozlowski@linaro.org
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high. Since Linux drivers were updated to
handle proper flag, correct the DTS.
The change is not backwards compatible with older Linux kernel.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-2-krzysztof.kozlowski@linaro.org
The bob supply is used by several pmic regulators and components which
are not (yet fully) described in the devicetree.
Mark the regulator as always-on for now.
Fixes: f29077d866 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-5-johan+linaro@kernel.org
The s12b supply is used by several pmic regulators as well as the
wlan/bluetooth radio which are not yet fully described in the
devicetree.
Mark the regulator as always-on for now.
Fixes: f29077d866 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-4-johan+linaro@kernel.org
The s10b supply is used by several components that are not (yet)
described in devicetree (e.g. ram, charger, ec) and must not be
disabled.
Mark the regulator as always-on.
Fixes: f29077d866 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-3-johan+linaro@kernel.org
The s11b supply is used by the wlan module (as well as some of the
pmics) which are not yet fully described in the devicetree.
Mark the regulator as always-on for now.
Fixes: 123b30a756 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller")
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-2-johan+linaro@kernel.org
- A couple of i.MX93 fixes from Alexander Stein to correct EQoS Ethernet
properties.
- Correct clock-names of FlexSPI device in imx8-ss-lsio DT.
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property and
switch to the new bindings.
- Fix an issue with imx-weim bus driver that branch condition evaluates
to a garbage value.
- Correct WM8960 clock name for imx8mm-nitrogen-r2 board.
- Fix LCDIF2 clocks for i.MX8MP DT.
- Add missing #sound-dai-cells properties to SAI nodes for i.MX8MN DT.
- Revert LS1028A DT changes of getting MAC addresses from VPD, as the
dependency on NVMEM device is not in place.
- A series from Peng Fan to add missing pinctrl property for i.MX6SL
based devices.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQRxqUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5fJgf/b9gDwsdBW/u4p7cxo57u5kwxw7b4
YynKjsobP9T/ZQCak9lGPHDQGUkMoWHvHgU9xghjHfcNSX41i7KJgcbluk5YbEtw
gcDvq0lUUT+lJzH2C7HlgwUjp2zWb84DZb4byyHTxcJK6my8RMQ6WtCONVwxrbv4
yJkXjzeXcV1jP2P+isSpG82zpMTkQaDQaV8/fEWPhfm0zXYhTY13tRdA20knaMyS
lEzfq/IG9Ikgh3Ho4WoMIGCz3ZZJqCDjLYFH+i6kh1XWILyUkVvnSbyueRJCIYCT
1dGsM/DKBADWL3frSGS6HbnlCOGdk3EOfGpRsLKZhbpEqqeAbyPHDL3X6A==
=qjnx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1O1H
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc-fixes
i.MX fixes for 6.3:
- A couple of i.MX93 fixes from Alexander Stein to correct EQoS Ethernet
properties.
- Correct clock-names of FlexSPI device in imx8-ss-lsio DT.
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property and
switch to the new bindings.
- Fix an issue with imx-weim bus driver that branch condition evaluates
to a garbage value.
- Correct WM8960 clock name for imx8mm-nitrogen-r2 board.
- Fix LCDIF2 clocks for i.MX8MP DT.
- Add missing #sound-dai-cells properties to SAI nodes for i.MX8MN DT.
- Revert LS1028A DT changes of getting MAC addresses from VPD, as the
dependency on NVMEM device is not in place.
- A series from Peng Fan to add missing pinctrl property for i.MX6SL
based devices.
* tag 'imx-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
bus: imx-weim: fix branch condition evaluates to a garbage value
arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
arm64: dts: imx93: Fix eqos properties
arm64: dts: imx8mp: Fix LCDIF2 node clock order
arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD"
arm64: dts: freescale: imx8-ss-lsio: Fix flexspi clock order
Link: https://lore.kernel.org/r/20230315132814.GF143566@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a fix for the CBB bus' ranges property on Tegra194 and
Tegra234 that restores proper translation of PCI addresses.
-----BEGIN PGP SIGNATURE-----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=37uO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=n0So
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.3-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc-fixes
arm64: tegra: Device tree fixes for v6.3-rc1
This contains a fix for the CBB bus' ranges property on Tegra194 and
Tegra234 that restores proper translation of PCI addresses.
* tag 'tegra-for-6.3-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Bump CBB ranges property on Tegra194 and Tegra234
Link: https://lore.kernel.org/r/20230302094213.3874449-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On page fault, we find about the VMA that backs the page fault
early on, and quickly release the mmap_read_lock. However, using
the VMA pointer after the critical section is pretty dangerous,
as a teardown may happen in the meantime and the VMA be long gone.
Move the sampling of the MTE permission early, and NULL-ify the
VMA pointer after that, just to be on the safe side.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230316174546.3777507-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We walk the userspace PTs to discover what mapping size was
used there. However, this can race against the userspace tables
being freed, and we end-up in the weeds.
Thankfully, the mm code is being generous and will IPI us when
doing so. So let's implement our part of the bargain and disable
interrupts around the walk. This ensures that nothing terrible
happens during that time.
We still need to handle the removal of the page tables before
the walk. For that, allow get_user_mapping_size() to return an
error, and make sure this error can be propagated all the way
to the the exit handler.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230316174546.3777507-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Read mmu_invalidate_seq before dropping the mmap_lock so that KVM can
detect if the results of vma_lookup() (e.g. vma_shift) become stale
before it acquires kvm->mmu_lock. This fixes a theoretical bug where a
VMA could be changed by userspace after vma_lookup() and before KVM
reads the mmu_invalidate_seq, causing KVM to install page table entries
based on a (possibly) no-longer-valid vma_shift.
Re-order the MMU cache top-up to earlier in user_mem_abort() so that it
is not done after KVM has read mmu_invalidate_seq (i.e. so as to avoid
inducing spurious fault retries).
This bug has existed since KVM/ARM's inception. It's unlikely that any
sane userspace currently modifies VMAs in such a way as to trigger this
race. And even with directed testing I was unable to reproduce it. But a
sufficiently motivated host userspace might be able to exploit this
race.
Fixes: 94f8e6418d ("KVM: ARM: Handle guest faults in KVM")
Cc: stable@vger.kernel.org
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230313235454.2964067-1-dmatlack@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
