Commit graph

86 commits

Author SHA1 Message Date
Bart Van Assche
c77ff7fd03 blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
Most blk-mq functions have a name that follows the pattern blk_mq_${action}.
However, the function name blk_mq_request_direct_issue is an exception.
Hence rename this function. This patch does not change any functionality.

Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-19 12:51:59 -07:00
Ming Lei
396eaf21ee blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback
blk_insert_cloned_request() is called in the fast path of a dm-rq driver
(e.g. blk-mq request-based DM mpath).  blk_insert_cloned_request() uses
blk_mq_request_bypass_insert() to directly append the request to the
blk-mq hctx->dispatch_list of the underlying queue.

1) This way isn't efficient enough because the hctx spinlock is always
used.

2) With blk_insert_cloned_request(), we completely bypass underlying
queue's elevator and depend on the upper-level dm-rq driver's elevator
to schedule IO.  But dm-rq currently can't get the underlying queue's
dispatch feedback at all.  Without knowing whether a request was issued
or not (e.g. due to underlying queue being busy) the dm-rq elevator will
not be able to provide effective IO merging (as a side-effect of dm-rq
currently blindly destaging a request from its elevator only to requeue
it after a delay, which kills any opportunity for merging).  This
obviously causes very bad sequential IO performance.

Fix this by updating blk_insert_cloned_request() to use
blk_mq_request_direct_issue().  blk_mq_request_direct_issue() allows a
request to be issued directly to the underlying queue and returns the
dispatch feedback (blk_status_t).  If blk_mq_request_direct_issue()
returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE
to _not_ destage the request.  Whereby preserving the opportunity to
merge IO.

With this, request-based DM's blk-mq sequential IO performance is vastly
improved (as much as 3X in mpath/virtio-scsi testing).

Signed-off-by: Ming Lei <ming.lei@redhat.com>
[blk-mq.c changes heavily influenced by Ming Lei's initial solution, but
they were refactored to make them less fragile and easier to read/review]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-17 09:46:54 -07:00
Tejun Heo
5a61c36398 blk-mq: remove REQ_ATOM_STARTED
After the recent updates to use generation number and state based
synchronization, we can easily replace REQ_ATOM_STARTED usages by
adding an extra state to distinguish completed but not yet freed
state.

Add MQ_RQ_COMPLETE and replace REQ_ATOM_STARTED usages with
blk_mq_rq_state() tests.  REQ_ATOM_STARTED no longer has any users
left and is removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 09:31:15 -07:00
Tejun Heo
358f70da49 blk-mq: make blk_abort_request() trigger timeout path
With issue/complete and timeout paths now using the generation number
and state based synchronization, blk_abort_request() is the only one
which depends on REQ_ATOM_COMPLETE for arbitrating completion.

There's no reason for blk_abort_request() to be a completely separate
path.  This patch makes blk_abort_request() piggyback on the timeout
path instead of trying to terminate the request directly.

This removes the last dependency on REQ_ATOM_COMPLETE in blk-mq.

Note that this makes blk_abort_request() asynchronous - it initiates
abortion but the actual termination will happen after a short while,
even when the caller owns the request.  AFAICS, SCSI and ATA should be
fine with that and I think mtip32xx and dasd should be safe but not
completely sure.  It'd be great if people who know the drivers take a
look.

v2: - Add comment explaining the lack of synchronization around
      ->deadline update as requested by Bart.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi SP <asamymuthupa@micron.com>
Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 09:31:15 -07:00
Tejun Heo
1d9bd5161b blk-mq: replace timeout synchronization with a RCU and generation based scheme
Currently, blk-mq timeout path synchronizes against the usual
issue/completion path using a complex scheme involving atomic
bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence
rules.  Unfortunately, it contains quite a few holes.

There's a complex dancing around REQ_ATOM_STARTED and
REQ_ATOM_COMPLETE between issue/completion and timeout paths; however,
they don't have a synchronization point across request recycle
instances and it isn't clear what the barriers add.
blk_mq_check_expired() can easily read STARTED from N-2'th iteration,
deadline from N-1'th, blk_mark_rq_complete() against Nth instance.

In fact, it's pretty easy to make blk_mq_check_expired() terminate a
later instance of a request.  If we induce 5 sec delay before
time_after_eq() test in blk_mq_check_expired(), shorten the timeout to
2s, and issue back-to-back large IOs, blk-mq starts timing out
requests spuriously pretty quickly.  Nothing actually timed out.  It
just made the call on a recycle instance of a request and then
terminated a later instance long after the original instance finished.
The scenario isn't theoretical either.

This patch replaces the broken synchronization mechanism with a RCU
and generation number based one.

1. Each request has a u64 generation + state value, which can be
   updated only by the request owner.  Whenever a request becomes
   in-flight, the generation number gets bumped up too.  This provides
   the basis for the timeout path to distinguish different recycle
   instances of the request.

   Also, marking a request in-flight and setting its deadline are
   protected with a seqcount so that the timeout path can fetch both
   values coherently.

2. The timeout path fetches the generation, state and deadline.  If
   the verdict is timeout, it records the generation into a dedicated
   request abortion field and does RCU wait.

3. The completion path is also protected by RCU (from the previous
   patch) and checks whether the current generation number and state
   match the abortion field.  If so, it skips completion.

4. The timeout path, after RCU wait, scans requests again and
   terminates the ones whose generation and state still match the ones
   requested for abortion.

   By now, the timeout path knows that either the generation number
   and state changed if it lost the race or the completion will yield
   to it and can safely timeout the request.

While it's more lines of code, it's conceptually simpler, doesn't
depend on direct use of subtle memory ordering or coherence, and
hopefully doesn't terminate the wrong instance.

While this change makes REQ_ATOM_COMPLETE synchronization unnecessary
between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't
removed yet as it's still used in other places.  Future patches will
move all state tracking to the new mechanism and remove all bitops in
the hot paths.

Note that this patch adds a comment explaining a race condition in
BLK_EH_RESET_TIMER path.  The race has always been there and this
patch doesn't change it.  It's just documenting the existing race.

v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao.
    - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter.
    - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter.

v3: - Fixed possible extended seqcount / u64_stats_sync read looping
      spotted by Peter.
    - MQ_RQ_IDLE was incorrectly being set in complete_request instead
      of free_request.  Fixed.

v4: - Rebased on top of hctx_lock() refactoring patch.
    - Added comment explaining the use of hctx_lock() in completion path.

v5: - Added comments requested by Bart.
    - Note the addition of BLK_EH_RESET_TIMER race condition in the
      commit message.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 09:31:15 -07:00
Linus Torvalds
e2c5923c34 Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-block
Pull core block layer updates from Jens Axboe:
 "This is the main pull request for block storage for 4.15-rc1.

  Nothing out of the ordinary in here, and no API changes or anything
  like that. Just various new features for drivers, core changes, etc.
  In particular, this pull request contains:

   - A patch series from Bart, closing the whole on blk/scsi-mq queue
     quescing.

   - A series from Christoph, building towards hidden gendisks (for
     multipath) and ability to move bio chains around.

   - NVMe
        - Support for native multipath for NVMe (Christoph).
        - Userspace notifications for AENs (Keith).
        - Command side-effects support (Keith).
        - SGL support (Chaitanya Kulkarni)
        - FC fixes and improvements (James Smart)
        - Lots of fixes and tweaks (Various)

   - bcache
        - New maintainer (Michael Lyle)
        - Writeback control improvements (Michael)
        - Various fixes (Coly, Elena, Eric, Liang, et al)

   - lightnvm updates, mostly centered around the pblk interface
     (Javier, Hans, and Rakesh).

   - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)

   - Writeback series that fix the much discussed hundreds of millions
     of sync-all units. This goes all the way, as discussed previously
     (me).

   - Fix for missing wakeup on writeback timer adjustments (Yafang
     Shao).

   - Fix laptop mode on blk-mq (me).

   - {mq,name} tupple lookup for IO schedulers, allowing us to have
     alias names. This means you can use 'deadline' on both !mq and on
     mq (where it's called mq-deadline). (me).

   - blktrace race fix, oopsing on sg load (me).

   - blk-mq optimizations (me).

   - Obscure waitqueue race fix for kyber (Omar).

   - NBD fixes (Josef).

   - Disable writeback throttling by default on bfq, like we do on cfq
     (Luca Miccio).

   - Series from Ming that enable us to treat flush requests on blk-mq
     like any other request. This is a really nice cleanup.

   - Series from Ming that improves merging on blk-mq with schedulers,
     getting us closer to flipping the switch on scsi-mq again.

   - BFQ updates (Paolo).

   - blk-mq atomic flags memory ordering fixes (Peter Z).

   - Loop cgroup support (Shaohua).

   - Lots of minor fixes from lots of different folks, both for core and
     driver code"

* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
  nvme: fix visibility of "uuid" ns attribute
  blk-mq: fixup some comment typos and lengths
  ide: ide-atapi: fix compile error with defining macro DEBUG
  blk-mq: improve tag waiting setup for non-shared tags
  brd: remove unused brd_mutex
  blk-mq: only run the hardware queue if IO is pending
  block: avoid null pointer dereference on null disk
  fs: guard_bio_eod() needs to consider partitions
  xtensa/simdisk: fix compile error
  nvme: expose subsys attribute to sysfs
  nvme: create 'slaves' and 'holders' entries for hidden controllers
  block: create 'slaves' and 'holders' entries for hidden gendisks
  nvme: also expose the namespace identification sysfs files for mpath nodes
  nvme: implement multipath access to nvme subsystems
  nvme: track shared namespaces
  nvme: introduce a nvme_ns_ids structure
  nvme: track subsystems
  block, nvme: Introduce blk_mq_req_flags_t
  block, scsi: Make SCSI quiesce and resume work reliably
  block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
  ...
2017-11-14 15:32:19 -08:00
Jens Axboe
79f720a751 blk-mq: only run the hardware queue if IO is pending
Currently we are inconsistent in when we decide to run the queue. Using
blk_mq_run_hw_queues() we check if the hctx has pending IO before
running it, but we don't do that from the individual queue run function,
blk_mq_run_hw_queue(). This results in a lot of extra and pointless
queue runs, potentially, on flush requests and (much worse) on tag
starvation situations. This is observable just looking at top output,
with lots of kworkers active. For the !async runs, it just adds to the
CPU overhead of blk-mq.

Move the has-pending check into the run function instead of having
callers do it.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:55:57 -07:00
Bart Van Assche
9a95e4ef70 block, nvme: Introduce blk_mq_req_flags_t
Several block layer and NVMe core functions accept a combination
of BLK_MQ_REQ_* flags through the 'flags' argument but there is
no verification at compile time whether the right type of block
layer flags is passed. Make it possible for sparse to verify this.
This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: linux-nvme@lists.infradead.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Ming Lei
244c65a3cc blk-mq: move blk_mq_put_driver_tag*() into blk-mq.h
We need this helper to put the driver tag for flush rq, since we will
not share tag in the flush request sequence in the following patch
in case that I/O scheduler is applied.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04 12:39:57 -06:00
Ming Lei
b0850297c7 block: pass 'run_queue' to blk_mq_request_bypass_insert
Block flush need this function without running the queue, so add a
parameter controlling whether we run it or not.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04 12:38:40 -06:00
Ming Lei
88022d7201 blk-mq: don't handle failure in .get_budget
It is enough to just check if we can get the budget via .get_budget().
And we don't need to deal with device state change in .get_budget().

For SCSI, one issue to be fixed is that we have to call
scsi_mq_uninit_cmd() to free allocated ressources if SCSI device fails
to handle the request. And it isn't enough to simply call
blk_mq_end_request() to do that if this request is marked as
RQF_DONTPREP.

Fixes: 0df21c86bdbf(scsi: implement .get_budget and .put_budget for blk-mq)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04 12:31:08 -06:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Ming Lei
b347689ffb blk-mq-sched: improve dispatching from sw queue
SCSI devices use host-wide tagset, and the shared driver tag space is
often quite big. However, there is also a queue depth for each lun(
.cmd_per_lun), which is often small, for example, on both lpfc and
qla2xxx, .cmd_per_lun is just 3.

So lots of requests may stay in sw queue, and we always flush all
belonging to same hw queue and dispatch them all to driver.
Unfortunately it is easy to cause queue busy because of the small
.cmd_per_lun.  Once these requests are flushed out, they have to stay in
hctx->dispatch, and no bio merge can happen on these requests, and
sequential IO performance is harmed.

This patch introduces blk_mq_dequeue_from_ctx for dequeuing a request
from a sw queue, so that we can dispatch them in scheduler's way. We can
then avoid dequeueing too many requests from sw queue, since we don't
flush ->dispatch completely.

This patch improves dispatching from sw queue by using the .get_budget
and .put_budget callbacks.

Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-01 08:20:02 -06:00
Ming Lei
de14829740 blk-mq: introduce .get_budget and .put_budget in blk_mq_ops
For SCSI devices, there is often a per-request-queue depth, which needs
to be respected before queuing one request.

Currently blk-mq always dequeues the request first, then calls
.queue_rq() to dispatch the request to lld. One obvious issue with this
approach is that I/O merging may not be successful, because when the
per-request-queue depth can't be respected, .queue_rq() has to return
BLK_STS_RESOURCE, and then this request has to stay in hctx->dispatch
list. This means it never gets a chance to be merged with other IO.

This patch introduces .get_budget and .put_budget callback in blk_mq_ops,
then we can try to get reserved budget first before dequeuing request.
If the budget for queueing I/O can't be satisfied, we don't need to
dequeue request at all. Hence the request can be left in the IO
scheduler queue, for more merging opportunities.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-01 08:20:02 -06:00
Jens Axboe
157f377beb block: directly insert blk-mq request from blk_insert_cloned_request()
A NULL pointer crash was reported for the case of having the BFQ IO
scheduler attached to the underlying blk-mq paths of a DM multipath
device.  The crash occured in blk_mq_sched_insert_request()'s call to
e->type->ops.mq.insert_requests().

Paolo Valente correctly summarized why the crash occured with:
"the call chain (dm_mq_queue_rq -> map_request -> setup_clone ->
blk_rq_prep_clone) creates a cloned request without invoking
e->type->ops.mq.prepare_request for the target elevator e.  The cloned
request is therefore not initialized for the scheduler, but it is
however inserted into the scheduler by blk_mq_sched_insert_request."

All said, a request-based DM multipath device's IO scheduler should be
the only one used -- when the original requests are issued to the
underlying paths as cloned requests they are inserted directly in the
underlying dispatch queue(s) rather than through an additional elevator.

But commit bd166ef18 ("blk-mq-sched: add framework for MQ capable IO
schedulers") switched blk_insert_cloned_request() from using
blk_mq_insert_request() to blk_mq_sched_insert_request().  Which
incorrectly added elevator machinery into a call chain that isn't
supposed to have any.

To fix this introduce a blk-mq private blk_mq_request_bypass_insert()
that blk_insert_cloned_request() calls to insert the request without
involving any elevator that may be attached to the cloned request's
request_queue.

Fixes: bd166ef183 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Cc: stable@vger.kernel.org
Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Tested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-11 16:43:57 -06:00
Jens Axboe
f299b7c7a9 blk-mq: provide internal in-flight variant
We don't have to inc/dec some counter, since we can just
iterate the tags. That makes inc/dec a noop, but means we
have to iterate busy tags to get an in-flight count.

Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-09 13:09:28 -06:00
Linus Torvalds
03ffbcdd78 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The irq department delivers:

   - Expand the generic infrastructure handling the irq migration on CPU
     hotplug and convert X86 over to it. (Thomas Gleixner)

     Aside of consolidating code this is a preparatory change for:

   - Finalizing the affinity management for multi-queue devices. The
     main change here is to shut down interrupts which are affine to a
     outgoing CPU and reenabling them when the CPU comes online again.
     That avoids moving interrupts pointlessly around and breaking and
     reestablishing affinities for no value. (Christoph Hellwig)

     Note: This contains also the BLOCK-MQ and NVME changes which depend
     on the rework of the irq core infrastructure. Jens acked them and
     agreed that they should go with the irq changes.

   - Consolidation of irq domain code (Marc Zyngier)

   - State tracking consolidation in the core code (Jeffy Chen)

   - Add debug infrastructure for hierarchical irq domains (Thomas
     Gleixner)

   - Infrastructure enhancement for managing generic interrupt chips via
     devmem (Bartosz Golaszewski)

   - Constification work all over the place (Tobias Klauser)

   - Two new interrupt controller drivers for MVEBU (Thomas Petazzoni)

   - The usual set of fixes, updates and enhancements all over the
     place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
  irqchip/or1k-pic: Fix interrupt acknowledgement
  irqchip/irq-mvebu-gicp: Allocate enough memory for spi_bitmap
  irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
  nvme: Allocate queues for all possible CPUs
  blk-mq: Create hctx for each present CPU
  blk-mq: Include all present CPUs in the default queue mapping
  genirq: Avoid unnecessary low level irq function calls
  genirq: Set irq masked state when initializing irq_desc
  genirq/timings: Add infrastructure for estimating the next interrupt arrival time
  genirq/timings: Add infrastructure to track the interrupt timings
  genirq/debugfs: Remove pointless NULL pointer check
  irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
  irqchip/gic-v3-its: Add ACPI NUMA node mapping
  irqchip/gic-v3-its-platform-msi: Make of_device_ids const
  irqchip/gic-v3-its: Make of_device_ids const
  irqchip/irq-mvebu-icu: Add new driver for Marvell ICU
  irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP
  dt-bindings/interrupt-controller: Add DT binding for the Marvell ICU
  genirq/irqdomain: Remove auto-recursive hierarchy support
  irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access
  ...
2017-07-03 16:50:31 -07:00
Christoph Hellwig
4b855ad371 blk-mq: Create hctx for each present CPU
Currently we only create hctx for online CPUs, which can lead to a lot
of churn due to frequent soft offline / online operations.  Instead
allocate one for each present CPU to avoid this and dramatically simplify
the code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-block@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Link: http://lkml.kernel.org/r/20170626102058.10200-3-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-28 23:00:07 +02:00
Christoph Hellwig
e4cdf1a1cb blk-mq: remove __blk_mq_alloc_request
Move most code into blk_mq_rq_ctx_init, and the rest into
blk_mq_get_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18 10:08:55 -06:00
Christoph Hellwig
6af54051a0 blk-mq: simplify blk_mq_free_request
Merge three functions only tail-called by blk_mq_free_request into
blk_mq_free_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18 10:08:55 -06:00
Christoph Hellwig
6e15cf2a0b blk-mq: mark blk_mq_rq_ctx_init static
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18 10:08:55 -06:00
Omar Sandoval
d173a25165 blk-mq: move debugfs declarations to a separate header file
Preparation for adding more declarations.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:23:44 -06:00
Bart Van Assche
62d6c9496a blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
Since the blk_mq_debugfs_*register_hctxs() functions register and
unregister all attributes under the "mq" directory, rename these
into blk_mq_debugfs_*register_mq().

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Bart Van Assche
4c9e4019f1 blk-mq: Let blk_mq_debugfs_register() look up the queue name
A later patch will move the call of blk_mq_debugfs_register() to
a function to which the queue name is not passed as an argument.
To avoid having to add a 'name' argument to multiple callers, let
blk_mq_debugfs_register() look up the queue name.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Bart Van Assche
2d0364c8c1 blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
A later patch in this series will modify blk_mq_debugfs_register()
such that it uses q->kobj.parent to determine the name of a
request queue. Hence make sure that that pointer is initialized
before blk_mq_debugfs_register() is called. To avoid lock inversion,
protect sysfs / debugfs registration with the queue sysfs_lock
instead of the global mutex all_q_mutex.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Omar Sandoval
229a92873f blk-mq: add shallow depth option for blk_mq_get_tag()
Wire up the sbitmap_get_shallow() operation to the tag code so that a
caller can limit the number of tags available to it.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 14:06:54 -06:00
Jens Axboe
65f619d253 Merge branch 'for-linus' into for-4.12/block
We've added a considerable amount of fixes for stalls and issues
with the blk-mq scheduling in the 4.11 series since forking
off the for-4.12/block branch. We need to do improvements on
top of that for 4.12, so pull in the previous fixes to make
our lives easier going forward.

Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07 12:45:20 -06:00
Omar Sandoval
81380ca107 blk-mq: use the right hctx when getting a driver tag fails
While dispatching requests, if we fail to get a driver tag, we mark the
hardware queue as waiting for a tag and put the requests on a
hctx->dispatch list to be run later when a driver tag is freed. However,
blk_mq_dispatch_rq_list() may dispatch requests from multiple hardware
queues if using a single-queue scheduler with a multiqueue device. If
blk_mq_get_driver_tag() fails, it doesn't update the hardware queue we
are processing. This means we end up using the hardware queue of the
previous request, which may or may not be the same as that of the
current request. If it isn't, the wrong hardware queue will end up
waiting for a tag, and the requests will be on the wrong dispatch list,
leading to a hang.

The fix is twofold:

1. Make sure we save which hardware queue we were trying to get a
   request for in blk_mq_get_driver_tag() regardless of whether it
   succeeds or not.
2. Make blk_mq_dispatch_rq_list() take a request_queue instead of a
   blk_mq_hw_queue to make it clear that it must handle multiple
   hardware queues, since I've already messed this up on a couple of
   occasions.

This didn't appear in testing with nvme and mq-deadline because nvme has
more driver tags than the default number of scheduler tags. However,
with the blk_mq_update_nr_hw_queues() fix, it showed up with nbd.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07 08:56:26 -06:00
Omar Sandoval
34dbad5d26 blk-stat: convert to callback-based statistics reporting
Currently, statistics are gathered in ~0.13s windows, and users grab the
statistics whenever they need them. This is not ideal for both in-tree
users:

1. Writeback throttling wants its own dynamically sized window of
   statistics. Since the blk-stats statistics are reset after every
   window and the wbt windows don't line up with the blk-stats windows,
   wbt doesn't see every I/O.
2. Polling currently grabs the statistics on every I/O. Again, depending
   on how the window lines up, we may miss some I/Os. It's also
   unnecessary overhead to get the statistics on every I/O; the hybrid
   polling heuristic would be just as happy with the statistics from the
   previous full window.

This reworks the blk-stats infrastructure to be callback-based: users
register a callback that they want called at a given time with all of
the statistics from the window during which the callback was active.
Users can dynamically bucketize the statistics. wbt and polling both
currently use read vs. write, but polling can be extended to further
subdivide based on request size.

The callbacks are kept on an RCU list, and each callback has percpu
stats buffers. There will only be a few users, so the overhead on the
I/O completion side is low. The stats flushing is also simplified
considerably: since the timer function is responsible for clearing the
statistics, we don't have to worry about stale statistics.

wbt is a trivial conversion. After the conversion, the windowing problem
mentioned above is fixed.

For polling, we register an extra callback that caches the previous
window's statistics in the struct request_queue for the hybrid polling
heuristic to use.

Since we no longer have a single stats buffer for the request queue,
this also removes the sysfs and debugfs stats entries. To replace those,
we add a debugfs entry for the poll statistics.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 10:03:11 -06:00
Ming Lei
7ea5fe31c1 blk-mq: make lifetime consitent between q/ctx and its kobject
Currently from kobject view, both q->mq_kobj and ctx->kobj can
be released during one cycle of blk_mq_register_dev() and
blk_mq_unregister_dev(). Actually, sw queue's lifetime is
same with its request queue's, which is covered by request_queue->kobj.

So we don't need to call kobject_put() for the two kinds of
kobject in __blk_mq_unregister_dev(), instead we do that
in release handler of request queue.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 09:56:12 -07:00
Ming Lei
737f98cfe7 blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()
Both q->mq_kobj and sw queues' kobjects should have been initialized
once, instead of doing that each add_disk context.

Also this patch removes clearing of ctx in blk_mq_init_cpu_queues()
because percpu allocator fills zero to allocated variable.

This patch fixes one issue[1] reported from Omar.

[1] kernel wearning when doing unbind/bind on one scsi-mq device

[   19.347924] kobject (ffff8800791ea0b8): tried to init an initialized object, something is seriously wrong.
[   19.349781] CPU: 1 PID: 84 Comm: kworker/u8:1 Not tainted 4.10.0-rc7-00210-g53f39eeaa263 #34
[   19.350686] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-20161122_114906-anatol 04/01/2014
[   19.350920] Workqueue: events_unbound async_run_entry_fn
[   19.350920] Call Trace:
[   19.350920]  dump_stack+0x63/0x83
[   19.350920]  kobject_init+0x77/0x90
[   19.350920]  blk_mq_register_dev+0x40/0x130
[   19.350920]  blk_register_queue+0xb6/0x190
[   19.350920]  device_add_disk+0x1ec/0x4b0
[   19.350920]  sd_probe_async+0x10d/0x1c0 [sd_mod]
[   19.350920]  async_run_entry_fn+0x48/0x150
[   19.350920]  process_one_work+0x1d0/0x480
[   19.350920]  worker_thread+0x48/0x4e0
[   19.350920]  kthread+0x101/0x140
[   19.350920]  ? process_one_work+0x480/0x480
[   19.350920]  ? kthread_create_on_node+0x60/0x60
[   19.350920]  ret_from_fork+0x2c/0x40

Cc: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 09:56:12 -07:00
Omar Sandoval
5974839899 blk-mq: kill blk_mq_set_alloc_data()
Nothing is using it anymore.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
2017-03-02 08:56:04 -07:00
Omar Sandoval
18fbda91c6 block: use same block debugfs directory for blk-mq and blktrace
When I added the blk-mq debugging information to debugfs, I didn't
notice that blktrace also creates a "block" directory in debugfs. Make
them use the same dentry, now created in the core block code. Based on a
patch from Jens.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02 10:20:16 -07:00
Omar Sandoval
400f73b23f blk-mq: fix debugfs compilation issues
This fixes a couple of problems:

1. In the !CONFIG_DEBUG_FS case, the stub definitions were bogus.
2. In the !CONFIG_BLOCK case, blk-mq-debugfs.c shouldn't be compiled at
   all.

Fix the stub definitions and add a CONFIG_BLK_DEBUG_FS Kconfig option.

Fixes: 07e4fead45 ("blk-mq: create debugfs directory tree")
Signed-off-by: Omar Sandoval <osandov@fb.com>

Augment Kconfig description.

Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 15:03:01 -07:00
Jens Axboe
bd6737f1ae blk-mq-sched: add flush insertion into blk_mq_sched_insert_request()
Instead of letting the caller check this and handle the details
of inserting a flush request, put the logic in the scheduler
insertion function. This fixes direct flush insertion outside
of the usual make_request_fn calls, like from dm via
blk_insert_cloned_request().

Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 09:03:14 -07:00
Jens Axboe
50e1dab86a blk-mq-sched: fix starvation for multiple hardware queues and shared tags
If we have both multiple hardware queues and shared tag map between
devices, we need to ensure that we propagate the hardware queue
restart bit higher up. This is because we can get into a situation
where we don't have any IO pending on a hardware queue, yet we fail
getting a tag to start new IO. If that happens, it's not enough to
mark the hardware queue as needing a restart, we need to bubble
that up to the higher level queue as well.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Tested-by: Hannes Reinecke <hare@suse.com>
2017-01-27 08:20:34 -07:00
Omar Sandoval
07e4fead45 blk-mq: create debugfs directory tree
In preparation for putting blk-mq debugging information in debugfs,
create a directory tree mirroring the one in sysfs:

    # tree -d /sys/kernel/debug/block
    /sys/kernel/debug/block
    |-- nvme0n1
    |   `-- mq
    |       |-- 0
    |       |   `-- cpu0
    |       |-- 1
    |       |   `-- cpu1
    |       |-- 2
    |       |   `-- cpu2
    |       `-- 3
    |           `-- cpu3
    `-- vda
        `-- mq
            `-- 0
                |-- cpu0
                |-- cpu1
                |-- cpu2
                `-- cpu3

Also add the scaffolding for the actual files that will go in here,
either under the hardware queue or software queue directories.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 08:17:44 -07:00
Jens Axboe
bd166ef183 blk-mq-sched: add framework for MQ capable IO schedulers
This adds a set of hooks that intercepts the blk-mq path of
allocating/inserting/issuing/completing requests, allowing
us to develop a scheduler within that framework.

We reuse the existing elevator scheduler API on the registration
side, but augment that with the scheduler flagging support for
the blk-mq interfce, and with a separate set of ops hooks for MQ
devices.

We split driver and scheduler tags, so we can run the scheduling
independently of device queue depth.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17 10:04:20 -07:00
Jens Axboe
cc71a6f438 blk-mq: abstract out helpers for allocating/freeing tag maps
Prep patch for adding an extra tag map for scheduler requests.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17 10:04:04 -07:00
Jens Axboe
4941115bef blk-mq-tag: cleanup the normal/reserved tag allocation
This is in preparation for having another tag set available. Cleanup
the parameters, and allow passing in of tags for blk_mq_put_tag().

Signed-off-by: Jens Axboe <axboe@fb.com>
[hch: even more cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17 10:03:59 -07:00
Jens Axboe
2c3ad66790 blk-mq: export some helpers we need to the scheduling framework
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17 10:03:53 -07:00
Linus Torvalds
a829a8445f SCSI misc on 20161213
This update includes the usual round of major driver updates (ncr5380,
 lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas).  There's also
 an assortment of minor fixes, mostly in error legs or other not very
 user visible stuff.  The major change is the pci_alloc_irq_vectors
 replacement for the old pci_msix_.. calls; this effectively makes IRQ
 mapping generic for the drivers and allows blk_mq to use the
 information.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYUJOvAAoJEAVr7HOZEZN42B0P/1lj1W2N7y0LOAbR2MasyQvT
 fMD/SSip/v+R/zJiTv+5M/IDQT6ez62JnQGWyX3HZTob9VEfoqagbUuHH6y+fmib
 tHyqiYc9FC/NZSRX/0ib+rpnSVhC/YRSVV7RrAqilbpOKAzeU25FlN/vbz+Nv/XL
 ReVBl+2nGjJtHyWqUN45Zuf74c0zXOWPPUD0hRaNclK5CfZv5wDYupzHzTNSQTkj
 nWvwPYT0OgSMNe7mR+IDFyOe3UQ/OYyeJB0yBNqO63IiaUabT8/hgrWR9qJAvWh8
 LiH+iSQ69+sDUnvWvFjuls/GzcFuuTljwJbm+FyTsmNHONPVY8JRCLNq7CNDJ6Vx
 HwpNuJdTSJpne4lAVBGPwgjs+GhlMvUP/xYVLWAXdaBxU9XGePrwqQDcFu1Rbx3P
 yfMiVaY1+e45OEjLRCbDAwFnMPevC3kyymIvSsTySJxhTbYrOsyrrWt5kwWsvE3r
 SKANsub+xUnpCkyg57nXRQStJSCiSfGIDsydKmMX+pf1SR4k6gCUQZlcchUX0uOa
 dcY6re0c7EJIQQiT7qeGP5TRBblxARocCA/Igx6b5U5HmuQ48tDFlMCps7/TE84V
 JBsBnmkXcEi/ALShL/Tui+3YKA1DfOtEnwHtXx/9Ecx/nxP2Sjr9LJwCKiONv8NY
 RgLpGfccrix34lQumOk5
 =sPXh
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (ncr5380,
  lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas).

  There's also an assortment of minor fixes, mostly in error legs or
  other not very user visible stuff. The major change is the
  pci_alloc_irq_vectors replacement for the old pci_msix_.. calls; this
  effectively makes IRQ mapping generic for the drivers and allows
  blk_mq to use the information"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (256 commits)
  scsi: qla4xxx: switch to pci_alloc_irq_vectors
  scsi: hisi_sas: support deferred probe for v2 hw
  scsi: megaraid_sas: switch to pci_alloc_irq_vectors
  scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devices
  scsi: be2iscsi: set errno on error path
  scsi: be2iscsi: set errno on error path
  scsi: hpsa: fallback to use legacy REPORT PHYS command
  scsi: scsi_dh_alua: Fix RCU annotations
  scsi: hpsa: use %phN for short hex dumps
  scsi: hisi_sas: fix free'ing in probe and remove
  scsi: isci: switch to pci_alloc_irq_vectors
  scsi: ipr: Fix runaway IRQs when falling back from MSI to LSI
  scsi: dpt_i2o: double free on error path
  scsi: cxlflash: Migrate scsi command pointer to AFU command
  scsi: cxlflash: Migrate IOARRIN specific routines to function pointers
  scsi: cxlflash: Cleanup queuecommand()
  scsi: cxlflash: Cleanup send_tmf()
  scsi: cxlflash: Remove AFU command lock
  scsi: cxlflash: Wait for active AFU commands to timeout upon tear down
  scsi: cxlflash: Remove private command pool
  ...
2016-12-14 10:49:33 -08:00
Jens Axboe
f04c3df3ef blk-mq: abstract out blk_mq_dispatch_rq_list() helper
Takes a list of requests, and dispatches it. Moves any residual
requests to the dispatch list.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-12-09 09:03:02 -07:00
Jens Axboe
cf43e6be86 block: add scalable completion tracking of requests
For legacy block, we simply track them in the request queue. For
blk-mq, we track them on a per-sw queue basis, which we can then
sum up through the hardware queues and finally to a per device
state.

The stats are tracked in, roughly, 0.1s interval windows.

Add sysfs files to display the stats.

The feature is off by default, to avoid any extra overhead. In-kernel
users of it can turn it on by setting QUEUE_FLAG_STATS in the queue
flags. We currently don't turn it on if someone just reads any of
the stats files, that is something we could add as well.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 13:53:26 -07:00
Christoph Hellwig
9e5a7e2295 blk-mq: export blk_mq_map_queues
This will allow SCSI to have a single blk_mq_ops structure that either
lets the LLDD map the queues to PCIe MSIx vectors or use the default.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:30:00 -05:00
Bart Van Assche
5d1b25c1ec blk-mq: Introduce blk_mq_hctx_stopped()
Multiple functions test the BLK_MQ_S_STOPPED bit so introduce
a helper function that performs this test.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-02 12:50:19 -06:00
Linus Torvalds
24532f7681 Merge branch 'for-4.9/block-smp' of git://git.kernel.dk/linux-block
Pull blk-mq CPU hotplug update from Jens Axboe:
 "This is the conversion of blk-mq to the new hotplug state machine"

* 'for-4.9/block-smp' of git://git.kernel.dk/linux-block:
  blk-mq: fixup "Convert to new hotplug state machine"
  blk-mq: Convert to new hotplug state machine
  blk-mq/cpu-notif: Convert to new hotplug state machine
2016-10-09 17:32:20 -07:00
Linus Torvalds
12e3d3cdd9 Merge branch 'for-4.9/block-irq' of git://git.kernel.dk/linux-block
Pull blk-mq irq/cpu mapping updates from Jens Axboe:
 "This is the block-irq topic branch for 4.9-rc. It's mostly from
  Christoph, and it allows drivers to specify their own mappings, and
  more importantly, to share the blk-mq mappings with the IRQ affinity
  mappings. It's a good step towards making this work better out of the
  box"

* 'for-4.9/block-irq' of git://git.kernel.dk/linux-block:
  blk_mq: linux/blk-mq.h does not include all the headers it depends on
  blk-mq: kill unused blk_mq_create_mq_map()
  blk-mq: get rid of the cpumask in struct blk_mq_tags
  nvme: remove the post_scan callout
  nvme: switch to use pci_alloc_irq_vectors
  blk-mq: provide a default queue mapping for PCI device
  blk-mq: allow the driver to pass in a queue mapping
  blk-mq: remove ->map_queue
  blk-mq: only allocate a single mq_map per tag_set
  blk-mq: don't redistribute hardware queues on a CPU hotplug event
2016-10-09 17:29:33 -07:00
Thomas Gleixner
9467f85960 blk-mq/cpu-notif: Convert to new hotplug state machine
Replace the block-mq notifier list management with the multi instance
facility in the cpu hotplug state machine.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-block@vger.kernel.org
Cc: rt@linutronix.de
Cc: Christoph Hellwing <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-22 08:05:17 -06:00
Omar Sandoval
40aabb6746 sbitmap: push per-cpu last_tag into sbitmap_queue
Allocating your own per-cpu allocation hint separately makes for an
awkward API. Instead, allocate the per-cpu hint as part of the struct
sbitmap_queue. There's no point for a struct sbitmap_queue without the
cache, but you can still use a bare struct sbitmap.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-17 08:39:10 -06:00