The PULMD bits and the SEC bit in the PORTCR register descriptions on
SH/R-Mobile SoCs are either unused or unsupported. Describe them as
reserved bits using a negative field width value, and drop the
corresponding dummy enum IDs.
This reduces kernel size by 2832 (R-Mobile APE6), 2544 (R-Mobile A1),
and/or 3228 (SH-Mobile AG5) bytes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1b123d8f04c2314d5a7a87004971868ba2176499.1649865241.git.geert+renesas@glider.be
Currently, reserved register fields must be fully described using dummy
enum IDs (zeroes), one for each possible state (2^bits states).
Add support for describing reserved fields using negative field width
values as shorthands, thus removing the need for dummy values. Apart
from the obvious size reduction due to the removal of the dummy values,
this will also enable merging adjacent reserved fields into a single
field, reducing the number of fields to describe, and thus kernel size.
Update the checker accordingly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/cad7c92ef039d9a4d039807efc15886a7aa862be.1649865241.git.geert+renesas@glider.be
All fields in the IPSR registers on RZ/G1C have the same width, but the
driver describes them using the PINMUX_CFG_REG_VAR() macro, which
is intended for fields with different widths. Convert the description
to use the PINMUX_CFG_REG() macro for fixed-width fields instead.
This reduces kernel size by 162 bytes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f6f26a0dfd16050ead83daf2b9fabeb8b26821a6.1649865241.git.geert+renesas@glider.be
Some of the drivers do not set parent device. This may lead to obstacles
during debugging or understanding the device relations from the Linux
point of view. Assign parent device for GPIO chips created by these
drivers.
While at it, let GPIO library to assign of_node from the parent device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220503151310.58762-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The hardware denies any access from the Linux non-secure world to the
secure-protected pins. Hence, prevent any driver to request such a pin.
Mark the secure-protected GPIO lines as invalid (.init_valid_mask) and
prevent the pinmux request / pinconf setting operations.
Identify the secure pins with "NO ACCESS" in the pinconf sysfs.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220502153114.283618-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Print the name of the selected alternate function in addition to its
number. Ex:
"pin 135 (PI7): alternate 10 (SAI2_FS_A) - ..."
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20220502152524.283374-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.
Fixes: 3b588e43ee ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220423094142.33013-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The sdmmc1_hv_trim_pins, sdmmc3_hv_trim_pins and sys_reset_n_pins are
not defined as pin groups:
drivers/pinctrl/tegra/pinctrl-tegra194.c:1119:27: error: ‘sdmmc3_hv_trim_pins’ defined but not used [-Werror=unused-const-variable=]
1119 | static const unsigned int sdmmc3_hv_trim_pins[] = {
Proper fix would be to define them, but this requires knowledge from
datasheet. Removal should not cause any harm and at least it silences
the warnings.
Fixes: 613c082608 ("pinctrl: tegra: Add pinmux support for Tegra194")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220429061332.25135-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
The following is an automated git shortlog grouped by driver:
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSu93Raj3rZDNXzGZv7cr9lmVa5zAUCYmwsmgAKCRD7cr9lmVa5
zEYPAP4q31AbTJHk6Fs1A79esVSo+DZSkZSzbk/n8Vr3oYG56gD/dVu5EmLNKPHU
6o5+BvdXqjHrymihHasdyD9YqI30zwM=
=MIEU
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into devel
intel-gpio for v5.19-1
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
The following is an automated git shortlog grouped by driver:
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220429082637.1308182-2-yangyingliang@huawei.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes: c7977ec4a3 ("pinctrl: sh-pfc: Convert to platform_get_*()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220429082637.1308182-1-yangyingliang@huawei.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Unlike on R-Car Gen3 SoCs, setting a bit to zero in a GPIO / Peripheral
Function Select Register (GPSRn) on R-Car S4-8 is not always sufficient
to configure a pin for GPIO. For I2C-capable pins, the I2C function
must also be explicitly disabled in the corresponding Module Select
Register (MODSELn).
Add the missing FN_SEL_I2Ci_0 function enums to the pinmux_data[] array
by temporarily overriding the GP_1_j_FN function enum to expand to two
enums: the original GP_1_j_FN enum to configure the GPSR register bits,
and the missing FN_SEL_I2Ci_0 enum to configure the MODSEL register
bits.
Fixes: 030ac6d7ee ("pinctrl: renesas: Initial R8A779F0 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c12c60ec1058140a37f03650043ab73f730f104f.1650610471.git.geert+renesas@glider.be
Unlike on R-Car Gen3 SoCs, setting a bit to zero in a GPIO / Peripheral
Function Select Register (GPSRn) on R-Car V3U is not always sufficient
to configure a pin for GPIO. For I2C-capable pins, the I2C function
must also be explicitly disabled in the corresponding Module Select
Register (MODSELn).
Add the missing FN_SEL_I2Ci_0 function enums to the pinmux_data[] array
by temporarily overriding the GP_2_j_FN function enum to expand to two
enums: the original GP_2_j_FN enum to configure the GSPR register bits,
and the missing FN_SEL_I2Ci_0 enum to configure the MODSEL register
bits.
Fixes: 741a7370fc ("pinctrl: renesas: Initial R8A779A0 (V3U) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4611e29e7b105513883084c1d6dc39c3ac8b525c.1650610471.git.geert+renesas@glider.be
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
The following is an automated git shortlog grouped by driver:
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSu93Raj3rZDNXzGZv7cr9lmVa5zAUCYmwsmgAKCRD7cr9lmVa5
zEYPAP4q31AbTJHk6Fs1A79esVSo+DZSkZSzbk/n8Vr3oYG56gD/dVu5EmLNKPHU
6o5+BvdXqjHrymihHasdyD9YqI30zwM=
=MIEU
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v5.19-1
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
Instead of enabling/disabling the clock at each IO configuration update,
just keep the clock enabled from the probe.
This makes things simpler and more efficient (e.g. the time required to
toggle an output IO is drastically decreased) without significantly
increasing the power consumption.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220422143608.226580-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge tag 'v5.18-rc5' into devel
Merge in Linux 5.18-rc5 since new code to the STM32 driver
depend in a non-trivial way on the fixes merged in -rc5.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
IES26 (BIT 16 of IES1_CFG_ADDR) controls the following pads:
- PAD_I2S_DATA_IN (GPIO114)
- PAD_I2S_LRCK (GPIO115)
- PAD_I2S_BCK (GPIO116)
The pinctrl table is wrong since it lists pins 114 to 112.
Update the table with the correct values.
Fixes: e94d8b6fb8 ("pinctrl: mediatek: add support for mt8365 SoC")
Reported-by: Youngmin Han <Youngmin.Han@geappliances.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220426125714.298907-1-mkorpershoek@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For lan966x, the GPIO 35 has the wrong function for alternate mode 2.
The mode is not none but is PTP sync.
Fixes: 531d6ab365 ("pinctrl: ocelot: Extend support for lan966x")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Link: https://lore.kernel.org/r/20220413192918.3777234-1-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pinctrl support for RK3588.
[merged in downstream fixes, simplified register lookup logic for better
maintanence at the cost of a bit more static const memory and fixed some
incorrect registers]
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20220422170920.401914-14-sebastian.reichel@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add error handling for the pull and driver register getters in preparation
for RK3588 support.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stübner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220422170920.401914-13-sebastian.reichel@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On the LAN9668 there is a shared reset line which affects GPIO, SGPIO
and the switch core. Add support for this shared reset line.
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220420191926.3411830-3-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The irq_of_parse_and_map() function returns 0 on failure, and does not
return an negative value.
Fixes: cefc03e599 ("pinctrl: Add Pistachio SoC pin control driver")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220424031430.3170759-1-lv.ruyi@zte.com.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current EOI handler for LEVEL triggered interrupts calls clk_enable(),
register IO, clk_disable(). The clock manipulation requires locking which
happens with IRQs disabled in clk_enable_lock(). Instead of turning the
clock on and off all the time, enable the clock in case LEVEL interrupt is
requested and keep the clock enabled until all LEVEL interrupts are freed.
The LEVEL interrupts are an exception on this platform and seldom used, so
this does not affect the common case.
This simplifies the LEVEL interrupt handling considerably and also fixes
the following splat found when using preempt-rt:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 #85
Hardware name: STM32 (Device Tree Support)
[<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc)
[<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84)
[<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4)
[<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74)
[<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62)
[<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16)
[<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80)
[<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18)
[<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24)
[<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48)
[<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8)
[<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22)
[<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64)
[<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64)
[<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0)
Exception stack(0xc0e01f18 to 0xc0e01f60)
1f00: 0000300c 00000000
1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78
1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff
[<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e)
[<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c)
[<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4)
[<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14)
[<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4)
[<c0a00c13>] (start_kernel) from [<00000000>] (0x0)
---[ end trace 0000000000000002 ]---
Power consumption measured on STM32MP157C DHCOM SoM is not increased or
is below noise threshold.
Fixes: 47beed513a ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220421140827.214088-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As seen on any other pinctrl subdriver that calls code from a main driver,
each subdriver needs to have a different compatible string. We don't want
the same compatible string to match a different subdriver's pinmux data as
it's not for our SoC.
Therefore, add new compatible strings for each pinctrl subdriver. Change
driver name on all subdrivers accordingly.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220414173916.5552-8-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Variables for functions include "grp" on the Ralink MT7620 and MT7621
subdrivers. Rename them to "func" instead as they define the functions for
the pin groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220414173916.5552-6-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rename "pinctrl-rt288x.c" to "pinctrl-rt2880.c" as this is the Ralink
RT2880 pinctrl subdriver. Rename PINCTRL_RT288X symbol to PINCTRL_RT2880.
Rename functions that include "rt288x" to "rt2880".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220414173916.5552-5-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl-rt2880.c and pinmux.h make up the Ralink pinctrl driver. Rename
pinctrl-rt2880.c to pinctrl-ralink.c. Rename pinmux.h to pinctrl-ralink.h.
Fix references to it. Rename functions that include "rt2880" to "ralink".
Remove PINCTRL_RT2880 symbol and make the existing PINCTRL_RALINK symbol
compile pinctrl-ralink.c. Change the bool to "Ralink pinctrl driver".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220414173916.5552-3-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The functions that include "MT7628(an)" are for MT7628 and MT7688 SoCs.
Rename them to MT76X8 to refer to both of the SoCs.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220414173916.5552-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add support for the new RZ/G2UL SoC,
- Add drive-strength support for R-Car E3,
- Add RPC/QSPI pin groups on R-Car E3 and E3,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYmKCvQAKCRCKwlD9ZEnx
cNqOAQDX6MXbDxiGOznJDwn+3UyfVA+y9JKXfcfwm05bW6WtqgD+L5W5EIBhF8i9
J1VNow2eoYP7NaKVMzOou1z2GaNKQg8=
=FPjF
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.19
- Add support for the new RZ/G2UL SoC,
- Add drive-strength support for R-Car E3,
- Add RPC/QSPI pin groups on R-Car E3 and E3,
- Miscellaneous fixes and improvements.
Update bulk clock voting to optional voting as ADSP bypass platform doesn't
need macro and decodec clocks, as these macro and dcodec GDSC switches are
maintained as power domains and operated from lpass clock drivers.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1650285427-19752-8-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Extract the chip specific SM8250 data from the LPASS LPI pinctrl driver
to allow reusing the common code in the addition of subsequent
platforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1650285427-19752-6-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The MC2 MMC interface can be configured with the FBCLK
(feedback clock) unconnected, leaving the pin available
for reuse for something else. Add a group mc2_a_2 for
this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220418164317.864418-1-linus.walleij@linaro.org
All the entries are sorted according to num/pin except for two
entries. Sort them too.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220420142432.248565-2-luca.ceresoli@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some of the pinmuxing bits described in rk3308_mux_recalced_data are wrong,
pointing to non-existing registers.
Fix the entire table.
Also add a comment in front of each entry with the same string that appears
in the datasheet to make the table easier to compare with the docs.
This fix has been tested on real hardware for the gpio3b3_sel entry.
Fixes: 7825aeb7b2 ("pinctrl: rockchip: add rk3308 SoC support")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220420142432.248565-1-luca.ceresoli@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
By being a bit smarter about how the SoC version checks are performed,
it is possible to have all the code paths that correspond to SoCs
disabled in the kernel config automatically marked as dead code by the
compiler, and therefore garbage-collected.
With this patch, when compiling a kernel that only targets the JZ4760
for instance, the driver is now about 4.5 KiB smaller.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220412162218.32509-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The MODULE_DEVICE_TABLE already creates proper alias for platform
driver. Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220407202509.23228-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The kernel test robot reported a warning as below:
>> drivers/pinctrl/meson/pinctrl-meson-s4.c:178:27: warning: unused variable 'tdm_sclk1_c_pins' [-Wunused-const-variable]
static const unsigned int tdm_sclk1_c_pins[] = { GPIOC_3 };
Fix it by adding missing description about this pins
Fixes: 775214d389 ("pinctrl: meson: add pinctrl driver support for Meson-S4 Soc")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220330023720.18238-1-qianggui.song@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Set the pinctrl driver as built-in by default if
ARM64 and ARCH_MEDIATEK are enabled.
Fixes: 6cf5e9ef36 ("pinctrl: add pinctrl driver on mt8195")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220327160813.2978637-1-fparent@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for deferring other params like PIN_CONFIG_INPUT_ENABLE.
This will be used to add support for PIN_CONFIG_INPUT_ENABLE to the
driver.
Fixes: e7165b1dff ("pinctrl/rockchip: add a queue for deferred pin output settings on probe")
Fixes: 59dd178e1d ("gpio/rockchip: fetch deferred output settings on probe")
Signed-off-by: Caleb Connolly <kc@postmarketos.org>
Link: https://lore.kernel.org/r/20220328005005.72492-2-kc@postmarketos.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The stm32_gpio_get() should only be called for LEVEL triggered interrupts,
skip calling it for EDGE triggered interrupts altogether to avoid wasting
CPU cycles in EOI handler. On this platform, EDGE triggered interrupts are
the majority and LEVEL triggered interrupts are the exception no less, and
the CPU cycles are not abundant.
Fixes: 47beed513a ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20220415215410.498349-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The first valid item of pin-function table should
start from the third item. The first two items,
due to historical and compatible reasons, should
be dummy items.
The two dummy items were removed accidentally in
initial submission. This fix adds them back.
Signed-off-by: Wells Lu <wellslutw@gmail.com>
Link: https://lore.kernel.org/r/1650015688-19774-1-git-send-email-wellslutw@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SoC supports a debug clock output of its internal clocks. Depending
on the clk_sel input (GPIO_31) clk_mon (GPIO_30) will output either
cpu_clk/64 or sys_clk/64. This is very useful for debugging and is
missing in the pinmux table. Add it.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220326192848.2944519-2-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
According to the reference manual, you can mux the PWM output on GPIO27
and GPIO51. This was missing in the pinmux table. Add it.
Tested on a LAN9668 on GPIO51.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220326192848.2944519-1-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The commit c8013355ea ("ARM: dts: gpio-ranges property is now required")
fixed the GPIO probing issues caused by "pinctrl: bcm2835: Change init
order for gpio hogs". This changed only the kernel DTS files. Unfortunately
it isn't guaranteed that these files are shipped to all users.
So implement the necessary backward compatibility for BCM2835 and
BCM2711 platform.
Fixes: 266423e60e ("pinctrl: bcm2835: Change init order for gpio hogs")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220409095129.45786-3-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Samsung pinctrl drivers depend on OF_GPIO, which is part of GPIOLIB.
ARMv7 Exynos platform selects GPIOLIB and Samsung pinctrl drivers. ARMv8
Exynos selects only the latter leading to possible wrong configuration
on ARMv8 build:
WARNING: unmet direct dependencies detected for PINCTRL_EXYNOS
Depends on [n]: PINCTRL [=y] && OF_GPIO [=n] && (ARCH_EXYNOS [=y] || ARCH_S5PV210 || COMPILE_TEST [=y])
Selected by [y]:
- ARCH_EXYNOS [=y]
Always select the GPIOLIB from the Samsung pinctrl drivers to fix the
issue. This requires removing of OF_GPIO dependency (to avoid recursive
dependency), so add dependency on OF for COMPILE_TEST cases.
Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Fixes: eed6b3eb20 ("arm64: Split out platform options to separate Kconfig")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220420141407.470955-1-krzysztof.kozlowski@linaro.org
If EINT_MTK is m and PINCTRL_MTK_V2 is y, build fails:
drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_set_config':
pinctrl-moore.c:(.text+0xa6c): undefined reference to `mtk_eint_set_debounce'
drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_to_irq':
pinctrl-moore.c:(.text+0xacc): undefined reference to `mtk_eint_find_irq'
Select EINT_MTK for PINCTRL_MTK_V2 to fix this.
Fixes: 8174a8512e ("pinctrl: mediatek: make MediaTek pinctrl v2 driver ready for buidling loadable module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220409105958.37412-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO (PINCTRL) block is identical on Renesas RZ/G2L, RZ/G2UL and RZ/V2L
SoC's, so instead of selecting PINCTRL_RZG2L config for each SoC select
PINCTRL_RZG2L config option if ARCH_RZG2L is enabled. The ARCH_RZG2L
config option is already selected by ARCH_R9A07G043, ARCH_R9A07G044 and
ARCH_R9A07G054.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220406075318.14385-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/G2UL SoC has fewer pins compared to RZ/G2L and the port pin
definitions are different compared to RZ/G2L.
This patch adds a new compatible to take care of these differences by
adding r9a07g043_data with r9a07g043_gpio_configs and
rzg2l_dedicated_pins.common.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220401180230.19950-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add pins, groups, and functions for the SPI Multi I/O Bus Controller
(RPC-IF) to the R8A77990 PFC driver. They are to be used when an
Octal-SPI Flash or HyperFlash is connected.
Redefine the QSPI[01] pin groups using the RPC DQ[0:7] pin data, to save
memory.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ec9735bb3468225e04ac6cb95e11a0e237b2b9ed.1648547080.git.geert+renesas@glider.be
According to R-Car Gen3 HW documentation 2.20 onwards, drive-strength is
introduced to r8a77990. It is also documented for r8a774c0. Add it to
the pinctrl driver.
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220320092542.2308-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The checker code to iterate over all drive strength and bias register
description items is cumbersome, due to the repeated calculation of
indices, and the use of hardcoded array sizes. The latter was done
under the assumption they would never need to be changed, which turned
out to be false.
Increase readability by introducing helper macros to access drive
strength and bias register description items.
Increase maintainability by replacing hardcoded numbers by array sizes
calculated at compile-time.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/5051ae56a1388ccf2d283dfc9624de2991cce914.1650355619.git.geert+renesas@glider.be
Prevent gpiolib from messing with the irqchip by advertising
the irq_chip structure as immutable, making it const, and adding
the various calls that gpiolib relies upon.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220419141846.598305-9-maz@kernel.org
Prevent gpiolib from messing with the irqchip by advertising
the irq_chip structure as immutable, making it const, and adding
the various calls that gpiolib relies upon.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220419141846.598305-8-maz@kernel.org
Prevent gpiolib from messing with the irqchip by advertising
the irq_chip structure as immutable, making it const, and adding
the various calls that gpiolib relies upon.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220419141846.598305-7-maz@kernel.org
Since we have generic function to count GPIO controller nodes
under a given device, there is no need to open code it. Replace
custom code by gpiochip_node_count() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Enable COMPILE_TEST for a better test coverage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Currently compilation test fails on x86 due to name collision. The usual
way to fix that is to move both conflicting parts to their own namespaces.
Rename REG_* to MESON_REG_* as a prerequisite for enabling COMPILE_TEST.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Since we have fwnode of the first found GPIO controller assigned to the
struct gpio_chip, we may reuse it in the armada_37xx_irqchip_register().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In other places the SDC and UFS pins have been swapped but this was
missed in the PINCTRL_PIN definitions. Fix that.
Fixes: 7d74b55afd ("pinctrl: qcom: Add SM6350 pinctrl driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20220318183004.858707-5-luca.weiss@fairphone.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add FWSPIDQ2 (AE12) and FWSPIDQ3 (AF12) function-group to support
AST2600 FW SPI quad mode. These pins can be used with dedicated FW
SPI pins - FWSPICS0# (AB14), FWSPICK (AF13), FWSPIMOSI (AC14)
and FWSPIMISO (AB13).
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-5-quic_jaehyoo@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
FWSPIDQ2 and FWSPIDQ3 are not part of FWSPI18 interface so remove
FWQSPID group in pinctrl. These pins must be used with the FWSPI
pins that are dedicated for boot SPI interface which provides
same 3.3v logic level.
Fixes: 2eda1cdec4 ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-3-quic_jaehyoo@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This pinctrl driver supports the 98DX25xx and 98DX35xx family of chips
from Marvell. It is based on the Marvell SDK with additions for various
(non-gpio) pin configurations based on the datasheet.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220414233055.586962-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Specify the PDC mapping for SM8150, so that gpio interrupts are
properly mapped to the wakeup IRQs of the PDC.
Cc: Maulik Shah <quic_mkshah@quicinc.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220226184028.111566-3-bhupesh.sharma@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Switch the code to use for_each_gpiochip_node() helper.
While at it, in order to avoid additional churn in the future,
switch to fwnode APIs where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The node is taken from the device pointer, which is supplied as a parameter,
hence no need to have a separate parameter for node. Drop redundant node
parameter in samsung_banks_of_node_get().
While at it, drop "of_" part in the samsung_banks_of_node_get() and
samsung_banks_of_node_put() function names to avoid additional churn
in the next changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add FWSPIDQ2 (AE12) and FWSPIDQ3 (AF12) function-group to support
AST2600 FW SPI quad mode. These pins can be used with dedicated FW
SPI pins - FWSPICS0# (AB14), FWSPICK (AF13), FWSPIMOSI (AC14)
and FWSPIMISO (AB13).
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-5-quic_jaehyoo@quicinc.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
FWSPIDQ2 and FWSPIDQ3 are not part of FWSPI18 interface so remove
FWQSPID group in pinctrl. These pins must be used with the FWSPI
pins that are dedicated for boot SPI interface which provides
same 3.3v logic level.
Fixes: 2eda1cdec4 ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-3-quic_jaehyoo@quicinc.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Switch the code to use for_each_gpiochip_node() helper.
While at it, in order to avoid additional churn in the future,
do the following:
- use a temporary variable for struct device pointer to shorten a few lines
- get rid of a temporary variable for vIRQ number, assign it directly
- switch to fwnode APIs where it makes sense
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Switch the code to use for_each_gpiochip_node() helper.
While at it, in order to avoid additional churn in the future,
switch to fwnode APIs where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Since we have generic function to count GPIO controller nodes
under a given device, there is no need to open code it. Replace
custom code by gpiochip_node_count() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Switch the code to use for_each_gpiochip_node() helper.
While at it, in order to avoid additional churn in the future,
switch to fwnode APIs where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Since we have generic function to count GPIO controller nodes
under a given device, there is no need to open code it. Replace
custom code by gpiochip_node_count() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
It appears that almost traditionally the N variants have deviations
in the register offsets in comparison to S one. This is the case
for Intel Alder Lake as well. Fix register offsets for ADL-N variant.
Fixes: 114b610b90 ("pinctrl: alderlake: Add Intel Alder Lake-N pin controller support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
struct fsd_pin_ctrl is not used outside of the file, so it can be made
static. This fixes sparse warning:
drivers/pinctrl/samsung/pinctrl-exynos-arm64.c:773:31: sparse:
symbol 'fsd_pin_ctrl' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 0d1b662c37 ("pinctrl: samsung: add FSD SoC specific data")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220331194526.52444-1-krzysztof.kozlowski@linaro.org
No core changes this time. Just new driver code and improvements!
New drivers:
- New driver for the Broadcom BCM4908 SoC.
- New subdriver for Tesla FSD (Full Self Driving) SoC, a
derivative of the Samsung Exynos pin control driver.
- New driver for the Amlogic Meson S4 SoC.
- New driver for the Sunplus SP7021 SoC.
- New driver for the Microsemi Ocelot family ServalT SoC.
- New subdriver for Intel Alder Lake-M SoC.
- New subdriver for Intel Ice Lake-N SoC, including PCH support.
- New subdriver for Renesas R8A779F0 SoC.
- New subdriver for Mediatek MT8186 SoC.
- New subdriver for NXP Freescale i.MX93 SoC.
- New driver for Nuvoton WPCM450 SoC.
- New driver for Qualcomm SC8280XP SoC.
Improvements:
- Wakeup support on Samsung Exynos850 and ExynosAutov9.
- Serious and voluminous maintenance cleanup and refactoring in
the Renesas drivers. Mainly sharing similar data between the
different SoC subdrivers.
- Qualcomm SM8450 EGPIO support.
- Drive strength support on the Mediatek MT8195.
- Add some missing groups and functions to the Ralink RT2880.
-----BEGIN PGP SIGNATURE-----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=TY4V
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time. Just new driver code and improvements!
New drivers:
- New driver for the Broadcom BCM4908 SoC.
- New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative
of the Samsung Exynos pin control driver.
- New driver for the Amlogic Meson S4 SoC.
- New driver for the Sunplus SP7021 SoC.
- New driver for the Microsemi Ocelot family ServalT SoC.
- New subdriver for Intel Alder Lake-M SoC.
- New subdriver for Intel Ice Lake-N SoC, including PCH support.
- New subdriver for Renesas R8A779F0 SoC.
- New subdriver for Mediatek MT8186 SoC.
- New subdriver for NXP Freescale i.MX93 SoC.
- New driver for Nuvoton WPCM450 SoC.
- New driver for Qualcomm SC8280XP SoC.
Improvements:
- Wakeup support on Samsung Exynos850 and ExynosAutov9.
- Serious and voluminous maintenance cleanup and refactoring in the
Renesas drivers. Mainly sharing similar data between the different
SoC subdrivers.
- Qualcomm SM8450 EGPIO support.
- Drive strength support on the Mediatek MT8195.
- Add some missing groups and functions to the Ralink RT2880"
* tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (188 commits)
pinctrl: mediatek: common-v1: fix semicolon.cocci warnings
pinctrl: nuvoton: wpcm450: Fix build error without OF
pinctrl: qcom-pmic-gpio: Add support for pm8450
dt-bindings: pinctrl: aspeed: Update gfx node in example
dt-bindings: pinctrl: rt2880: add missing pin groups and functions
pinctrl: ingenic: Fix regmap on X series SoCs
pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register()
pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register()
pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS
pinctrl: nuvoton: Fix sparse warning
pinctrl: mediatek: mt8186: Account for probe refactoring
pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback
pinctrl: mediatek: common-v1: Commonize spec_pupd callback
pinctrl: mediatek: common-v1: Use common probe function
pinctrl: mediatek: common-v1: Add common probe function
pinctrl: mediatek: paris: Unify probe function by using OF match data
pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
pinctrl: berlin: fix error return code of berlin_pinctrl_build_state()
pinctrl: qcom: Introduce sc8280xp TLMM driver
...
If OF is not set, bulding fails:
drivers/pinctrl/nuvoton/pinctrl-wpcm450.o: In function `wpcm450_dt_node_to_map':
pinctrl-wpcm450.c:(.text+0x404): undefined reference to `pinconf_generic_dt_node_to_map'
Make PINCTRL_WPCM450 depends on OF to fix this.
Fixes: a1d1e0e3d8 ("pinctrl: nuvoton: Add driver for WPCM450")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Link: https://lore.kernel.org/r/20220325074450.3228840-1-zhengbin13@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Highlights:
- new drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
- removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
- amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
- hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
- serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
- think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
- thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
- x86-android-tablets
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
- Lots of various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
ACPI / scan:
- Create platform device for CS35L41
ACPI / x86:
- Add support for LPS0 callback handler
ALSA:
- hda/realtek: Add support for HP Laptops
Add AMD system management interface:
- Add AMD system management interface
Add Intel Software Defined Silicon driver:
- Add Intel Software Defined Silicon driver
Documentation:
- syfs-class-firmware-attributes: Lenovo Certificate support
- Add x86/amd_hsmp driver
ISST:
- Fix possible circular locking dependency detected
Input:
- soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons
Merge remote-tracking branch 'pdx86/platform-drivers-x86-pinctrl-pmu_clk' into review-hans-gcc12:
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-pinctrl-pmu_clk' into review-hans-gcc12
Merge tag 'platform-drivers-x86-serial-multi-instantiate-1' into review-hans:
- Merge tag 'platform-drivers-x86-serial-multi-instantiate-1' into review-hans
Replace acpi_bus_get_device():
- Replace acpi_bus_get_device()
amd-pmc:
- Only report STB errors when STB enabled
- Drop CPU QoS workaround
- Output error codes in messages
- Move to later in the suspend process
- Validate entry into the deepest state on resume
- uninitialized variable in amd_pmc_s2d_init()
- Set QOS during suspend on CZN w/ timer wakeup
- Add support for AMD Spill to DRAM STB feature
- Correct usage of SMU version
- Make amd_pmc_stb_debugfs_fops static
asus-tf103c-dock:
- Make 2 global structs static
asus-wmi:
- Fix regression when probing for fan curve control
hp-wmi:
- support omen thermal profile policy v1
- Changing bios_args.data to be dynamically allocated
- Fix 0x05 error code reported by several WMI calls
- Fix SW_TABLET_MODE detection method
- Fix hp_wmi_read_int() reporting error (0x05)
huawei-wmi:
- check the return value of device_create_file()
i2c-multi-instantiate:
- Rename it for a generic serial driver name
int3472:
- Add terminator to gpiod_lookup_table
intel-uncore-freq:
- fix uncore_freq_common_init() error codes
intel_cht_int33fe:
- Move to intel directory
- Drop Lenovo Yogabook YB1-X9x code
- Switch to DMI modalias based loading
intel_crystal_cove_charger:
- Fix IRQ masking / unmasking
lg-laptop:
- Move setting of battery charge limit to common location
pinctrl:
- baytrail: Add pinconf group + function for the pmu_clk
platform/dcdbas:
- move EXPORT_SYMBOL after function
platform/surface:
- Remove Surface 3 Button driver
- surface3-wmi: Simplify resource management
- Replace acpi_bus_get_device()
- Reinstate platform dependency
platform/x86/intel-uncore-freq:
- Split common and enumeration part
platform/x86/intel/uncore-freq:
- Display uncore current frequency
- Use sysfs API to create attributes
- Move to uncore-frequency folder
selftests:
- sdsi: test sysfs setup
serial-multi-instantiate:
- Add SPI support
- Reorganize I2C functions
spi:
- Add API to count spi acpi resources
- Support selection of the index of the ACPI Spi Resource before alloc
- Create helper API to lookup ACPI info for spi device
- Make spi_alloc_device and spi_add_device public again
surface:
- surface3_power: Fix battery readings on batteries without a serial number
think-lmi:
- Certificate authentication support
thinkpad_acpi:
- consistently check fan_get_status return.
- Don't use test_bit on an integer
- Fix compiler warning about uninitialized err variable
- clean up dytc profile convert
- Add PSC mode support
- Add dual fan probe
- Add dual-fan quirk for T15g (2nd gen)
- Fix incorrect use of platform profile on AMD platforms
- Add quirk for ThinkPads without a fan
tools arch x86:
- Add Intel SDSi provisiong tool
touchscreen_dmi:
- Add info for the RWC NANOTE P8 AY07J 2-in-1
x86-android-tablets:
- Depend on EFI and SPI
- Lenovo Yoga Tablet 2 830/1050 sound support
- Workaround Lenovo Yoga Tablet 2 830/1050 poweroff hang
- Add Lenovo Yoga Tablet 2 830 / 1050 data
- Fix EBUSY error when requesting IOAPIC IRQs
- Minor charger / fuel-gauge improvements
- Add Nextbook Ares 8 data
- Add IRQ to Asus ME176C accelerometer info
- Add lid-switch gpio-keys pdev to Asus ME176C + TF103C
- Add x86_android_tablet_get_gpiod() helper
- Add Asus ME176C/TF103C charger and fuelgauge props
- Add battery swnode support
- Trivial typo fix for MODULE_AUTHOR
- Fix the buttons on CZC P10T tablet
- Constify the gpiod_lookup_tables arrays
- Add an init() callback to struct x86_dev_info
- Add support for disabling ACPI _AEI handlers
- Correct crystal_cove_charger module name
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmI8SjEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wYUwf/cdUMPFy5cwpHq1LuqGy+PxVCRHCe
71PFd2Ycj+HGOtrt66RxSiCC1Seb4tylr7FvudToDaqWjlBf5n6LhpDudg4ds7Qw
lCuRlaXTIrF7p3nOLIsWvJPRqacMG79KkRM62MLTS2evtRYjbnKvFzNPJPzr8827
1AhCakE92S8gkR5lUZYYHtsaz9rZ4z4TrEtjO6GdlbL2bDw0l18dNNwdMomfVpNS
bBIHIDLeufDuMJ4PxIHlE5MB3AuZAuc0HTJWihozyJX/h5FMGI6qVm0/s9RAfHgX
XdMCpADtS/JjHCmkFgLZYIzvXTxwQVZRo5VO0Wrv5Mis6gSpxJXCd0aKlA==
=1x9/
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"New drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
Removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
x86-android-tablets:
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits)
platform/x86: think-lmi: Certificate authentication support
Documentation: syfs-class-firmware-attributes: Lenovo Certificate support
platform/x86: amd-pmc: Only report STB errors when STB enabled
platform/x86: amd-pmc: Drop CPU QoS workaround
platform/x86: amd-pmc: Output error codes in messages
platform/x86: amd-pmc: Move to later in the suspend process
ACPI / x86: Add support for LPS0 callback handler
platform/x86: thinkpad_acpi: consistently check fan_get_status return.
platform/x86: hp-wmi: support omen thermal profile policy v1
platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated
platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)
platform/x86: amd-pmc: Validate entry into the deepest state on resume
platform/x86: thinkpad_acpi: Don't use test_bit on an integer
platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable
platform/x86: thinkpad_acpi: clean up dytc profile convert
platform/x86: x86-android-tablets: Depend on EFI and SPI
platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init()
platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes
...
The X series Ingenic SoCs have a shadow GPIO group which is at a higher
offset than the other groups, and is used for all GPIO configuration.
The regmap did not take this offset into account and set max_register
too low, so the regmap API blocked writes to the shadow group, which
made the pinctrl driver unable to configure any pins.
Fix this by adding regmap access tables to the chip info. The way that
max_register was computed was also off by one, since max_register is an
inclusive bound, not an exclusive bound; this has been fixed.
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Fixes: 6626a76ef8 ("pinctrl: ingenic: Add .max_register in regmap_config")
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220317000740.1045204-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In case of error, the function devm_platform_ioremap_resource()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().
Fixes: a1d1e0e3d8 ("pinctrl: nuvoton: Add driver for WPCM450")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220317065851.495394-1-zhangjialin11@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The > WPCM450_NUM_BANKS should be >= or it leads to an out of bounds
access on the next line.
Fixes: a1d1e0e3d8 ("pinctrl: nuvoton: Add driver for WPCM450")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220318071131.GA29472@kili
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
CONFIG_GENERIC_PINCTRL_GROUPS must be selected in order for
struct group_desc to be defined in pinctrl/core.h.
Add the missing select line to CONFIG_PINCTRL_WPCM450.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: a1d1e0e3d8 ("pinctrl: nuvoton: Add driver for WPCM450")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220317114413.1418484-1-j.neuschaefer@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Sparse complains:
drivers/pinctrl/nuvoton/pinctrl-wpcm450.c:626:9:
sparse: sparse: obsolete array initializer, use C99 syntax
This is because no equal sign is between the array index
and the assignments, in the macro.
Fix it up.
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The new MT8186 drive came in and the probe calls were
refactored at the same time. Fix it up. Fixes a build issue.
Cc: Guodong Liu <guodong.liu@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
After a somewhat quiet 5.17 release, the size of the DT changes
is a bit larger again. There are nine new SoC that get added,
all of them related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the
LG Nexus 5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs,
along with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC losely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added all
over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91, Allwinner,
i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)
-----BEGIN PGP SIGNATURE-----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=v98T
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
All of the MediaTek pinctrl drivers registering with pinctrl-mtk-common
that are offering a .spec_ies_smt_set() callback are declaring their
own function which is doing exactly the same on all drivers: calling
mtk_pconf_spec_set_ies_smt_range() with their struct and a simple check.
Commonize this callback by adding the ies and smt structure pointers
to struct mtk_pinctrl_devdata and changing the callback signature to
take it.
Removing the callback and checking for the existance of the spec_smt
and/or spec_ies data would allow us to staticize the function
mtk_pconf_spec_set_ies_smt_range(), but this solution was avoided as
to keep flexibility, as some SoCs may need to perform a very different
operation compared to what this commonized function is doing.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220222111144.20796-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reduce code size and duplication by using a common spec_pupd callback,
which is possible to use on all of the pinctrl drivers that are
using the v1 pinctrl-mtk-common code, with the exception of mt8135,
which has a different handling compared to the others.
Since the callback function signature was changed, this had to be
propagated to pinctrl-mt8135's spec_pull_set().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220222111144.20796-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Most of the mediatek pinctrl drivers are calling mtk_pctrl_init() and
passing only a pointer to struct mtk_pinctrl_devdata, as the regmap
handle it passed from device-tree, with the exception of mt6397.
For all of the drivers that don't require passing a struct regmap
pointer from a parent device, simplify the probe mechanism by assigning
the required structure as match data and use mtk_pctrl_common_probe()
as their probe function.
While at it, also collapse the of_device_id entries to a single line,
as they all fit in max 83 columns, which is acceptable.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220222111144.20796-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As a preparation to cleanup the probe mechanism of mediatek pinctrl
drivers that are using the v1 controller, add a common probe function
to this driver.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220222111144.20796-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All of the SoCs using Paris pinctrl are defining a custom probe
function that is simply calling mtk_paris_pinctrl_probe() passing
a pointer to the SoC specific mtk_pin_soc structure and nothing else.
Simplify the probe mechanism across all pinctrl drivers that are
using pinctrl-paris by passing the specific mtk_pin_soc as match
data and using function mtk_paris_pinctrl_probe as a common probe
function for all of them.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220222111144.20796-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 1e747e59cc ("pinctrl: rockchip: base regmap supplied by a syscon")
Fixes: 14dee8677e ("pinctrl: rockchip: let pmu registers be supplied by a syscon")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307120234.28657-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid
the refcount leak.
Fixes: 32e67eee67 ("pinctrl: nomadik: Allow prcm_base to be extracted from Device Tree")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307115116.25316-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When krealloc() fails and pctrl->functions is NULL, no error
return code of berlin_pinctrl_build_state() is assigned.
To fix this bug, ret is assigned with -ENOMEM when pctrl->functions
is NULL.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220303080206.16463-1-tangmeng@uniontech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Right now, when a gpio value is set, the actual hardware pin gets set
asynchronously. When linux write the output register, it takes some time
until it is actually propagated to the output shift registers. If that
output port is connected to an I2C mux for example, the linux driver
assumes the I2C bus is already switched although it is not.
Fortunately, there is a single shot mode with a feedback: you can
trigger the single shot and the hardware will clear that bit once it has
finished the clocking and strobed the load signal of the shift
registers. This can take a considerable amount of time though.
Measuremens have shown that it takes up to a whole burst cycle gap which
is about 50ms on the largest setting. Therefore, we have to mark the
output bank as sleepable. To avoid unnecessary waiting, just trigger the
single shot if the value was actually changed.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-6-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Make sgpio_output_set() return an error value. Don't just ignore the
return value of any regmap access but propagate it to our callers. Even
if the accesses never fail, this is a preparation patch to add single
shot mode where we need to poll a bit and thus we might get -ETIMEDOUT.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-5-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert sgpio_clrsetbits() to use regmap_update_bits() and drop the
spinlocks because regmap already takes care of the locking.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-4-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The interrupt ack register has the usual "write one to clear" semantics.
No read-modify-write is required here.
This is also a preparation patch to change the sgpio_clrsetbits() to use
regmap_update_bits() which don't write the value if it is not changed.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-3-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Protect any RMW access to the registers by a spinlock.
Fixes: 7e5ea974e6 ("pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-2-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the blamed commit, it removes the duplicate of_node assignment in the
driver. But the driver uses this before calling into of_gpio_dev_init to
determine if it needs to assign an IRQ chip to the GPIO. The fixes
consists in using the platform_get_irq_optional
Fixes: 8a8d6bbe1d ("pinctrl: Get rid of duplicate of_node assignment in the drivers")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220304144432.3397621-3-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
iomuxc_snvs from imx6ull supports 2 boot mode and 10 tamper pins.
Probably most users won't use them, causing this error message during boot:
no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000
This is actually not an error in this case, so reduce the level
accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220224094243.1376965-1-alexander.stein@ew.tq-group.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220308100956.2750295-12-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220308100956.2750295-11-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220308100956.2750295-10-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some of the MediaTek chips that utilize the Paris pinctrl driver library
support a lower drive strength (<= 1mA) than the standard drive strength
settings (2~16 mA) on certain pins. This was previously supported by the
custom MTK_PIN_CONFIG_DRV_ADV parameter along with the
"mediatek,drive-strength-adv" device tree property.
The drive strength values for this hardware are 125, 250, 500, and 1000 mA,
and can be readily described by the existing "drive-strength-microamp"
property, which then gets parsed by the generic pinconf library into the
parameter PIN_CONFIG_DRIVE_STRENGTH_UA.
Add support for PIN_CONFIG_DRIVE_STRENGTH_UA while keeping the old
custom parameter around for backward compatibility.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-9-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current code deals with optional features by testing for the
function pointers and returning -ENOTSUPP if it is not valid. This is
done for multiple pin config settings and results in the code that
handles the supporting cases to get indented by one level. This is
aggrevated by the fact that some features require another level of
conditionals.
Instead of assigning the same error code in all unsupported optional
feature cases, simply have that error code as the default, and break
out of the switch/case block whenever a feature is unsupported, or an
error is returned. This reduces indentation by one level for the useful
code.
Also replace the goto statements with break statements. The result is
the same, as the gotos simply exit the switch/case block, which can
also be achieved with a break statement. With the latter the intent
is clear and easier to understand.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-8-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Virtual GPIOs do not have any hardware state associated with them. Any
attempt to read back hardware state for these pins result in error
codes.
Skip dumping extra pin config information for these virtual GPIOs.
Fixes: 184d8e13f9 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-7-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The caller of mtk_pctrl_show_one_pin() is responsible for printing the
full line. mtk_pctrl_show_one_pin(), called through mtk_pctrl_dbg_show(),
should only produce a string containing the extra information the driver
wants included.
Drop the extra newlines. Also unbreak the line that is only slightly
over 80 characters to make it easier on the eye, and get rid of the
braces now that each block in the conditionals is just one line.
Fixes: 184d8e13f9 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Fixes: fb34a9ae38 ("pinctrl: mediatek: support rsel feature")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-6-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mtk_pconf_group_get(), used to read back pingroup pin config state,
simply returns a set of configs saved from a previous invocation of
mtk_pconf_group_set(). This is an unfiltered, unvalidated set passed
in from the pinconf core, which does not match the current hardware
state.
Since the driver library is designed to have one pin per group, pass
through mtk_pconf_group_get() to mtk_pinconf_get(), to read back the
current pin config state of the only pin in the group.
Also drop the assignment of pin config state to the group.
Fixes: 805250982b ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-5-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For mtk_pinconf_get(), the "argument" argument is typically returned by
pinconf_to_config_argument(), which holds the value for a given pinconf
parameter. It certainly should not have the type of "enum pin_config_param",
which describes the type of the pinconf parameter itself.
Change the type to u32, which matches the return type of
pinconf_to_config_argument().
Fixes: 805250982b ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-4-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When reading back pin bias settings, if the pin is not in the
corresponding bias state, the function should return -EINVAL.
Fix this in the mediatek-paris pinctrl library so that the read back
state is not littered with bogus a "input bias disabled" combined with
"pull up" or "pull down" states.
Fixes: 805250982b ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-3-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The bias-pull-* properties, or PIN_CONFIG_BIAS_PULL_* pin config
parameters, accept optional arguments in ohms denoting the strength of
the pin bias.
Print these values out in debugfs as well.
Fixes: eec450713e ("pinctrl: pinconf-generic: Add flag to print arguments")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-2-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: a6df410d42 ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308071155.21114-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This driver is based on the one for NPCM7xx, because the WPCM450 is a
predecessor of those SoCs. Notable differences:
- On WPCM450, the GPIO registers are not organized in multiple banks,
but rather placed continually into the same register block. This
affects how register offsets are computed.
- Pinmux nodes can explicitly select GPIO mode, whereas in the npcm7xx
driver, this happens automatically when a GPIO is requested.
Some functionality implemented in the hardware was (for now) left unused
in the driver, specifically blinking and pull-up/down.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220129115228.2257310-6-j.neuschaefer@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This driver can have up to two regmaps. If the second one is registered
its debugfs entry will have the same name as the first one and the
following error will be printed:
[ 2.242568] debugfs: Directory 'e2004064.pinctrl' with parent 'regmap' already present!
Give the second regmap a name to avoid this.
Fixes: 076d9e71bc ("pinctrl: ocelot: convert pinctrl to regmap")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20220216122727.1005041-1-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Prior to commit ad96111e65 ("pinctrl: ocelot: combine get resource and
ioremap into single call") the resource index was 1, now it is 0. But 0
is the base region for the pinctrl block. Fix it.
I noticed this because there was an error that the memory region was
ioremapped twice.
Fixes: ad96111e65 ("pinctrl: ocelot: combine get resource and ioremap into single call")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20220216082020.981797-1-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Introduce support for Alder Lake-N (required to revert misplaced ID)
* Add support for Raptor Lake-S
* Add support for Ice Lake-N (MacBookPro16,2)
* Miscellaneous fixes
The following is an automated git shortlog grouped by driver:
alderlake:
- Add Intel Alder Lake-N pin controller support
- Add Raptor Lake-S ACPI ID
baytrail:
- Clear direct_irq_en flag on broken configs
icelake:
- Add Ice Lake-N PCH pin controller support
intel:
- Fix a glitch when updating IRQ flags on a preconfigured line
- fix unexpected interrupt
Place correctly CONFIG_PINCTRL_ST in the Makefile:
- Place correctly CONFIG_PINCTRL_ST in the Makefile
tigerlake:
- Revert "Add Alder Lake-M ACPI ID"
-----BEGIN PGP SIGNATURE-----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=NiBS
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.18-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.18-1
* Introduce support for Alder Lake-N (required to revert misplaced ID)
* Add support for Raptor Lake-S
* Add support for Ice Lake-N (MacBookPro16,2)
* Miscellaneous fixes
The following is an automated git shortlog grouped by driver:
alderlake:
- Add Intel Alder Lake-N pin controller support
- Add Raptor Lake-S ACPI ID
baytrail:
- Clear direct_irq_en flag on broken configs
icelake:
- Add Ice Lake-N PCH pin controller support
intel:
- Fix a glitch when updating IRQ flags on a preconfigured line
- fix unexpected interrupt
Place correctly CONFIG_PINCTRL_ST in the Makefile:
- Place correctly CONFIG_PINCTRL_ST in the Makefile
tigerlake:
- Revert "Add Alder Lake-M ACPI ID"
This driver, like several others, uses a chained IRQ for each GPIO bank,
and forwards .irq_set_wake to the GPIO bank's upstream IRQ. As a result,
a call to irq_set_irq_wake() needs to lock both the upstream and
downstream irq_desc's. Lockdep considers this to be a possible deadlock
when the irq_desc's share lockdep classes, which they do by default:
============================================
WARNING: possible recursive locking detected
5.17.0-rc3-00394-gc849047c2473 #1 Not tainted
--------------------------------------------
init/307 is trying to acquire lock:
c2dfe27c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0
but task is already holding lock:
c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by init/307:
#0: c1f29f18 (system_transition_mutex){+.+.}-{3:3}, at: __do_sys_reboot+0x90/0x23c
#1: c20f7760 (&dev->mutex){....}-{3:3}, at: device_shutdown+0xf4/0x224
#2: c2e804d8 (&dev->mutex){....}-{3:3}, at: device_shutdown+0x104/0x224
#3: c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0
stack backtrace:
CPU: 0 PID: 307 Comm: init Not tainted 5.17.0-rc3-00394-gc849047c2473 #1
Hardware name: Allwinner sun8i Family
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x90
dump_stack_lvl from __lock_acquire+0x1680/0x31a0
__lock_acquire from lock_acquire+0x148/0x3dc
lock_acquire from _raw_spin_lock_irqsave+0x50/0x6c
_raw_spin_lock_irqsave from __irq_get_desc_lock+0x58/0xa0
__irq_get_desc_lock from irq_set_irq_wake+0x2c/0x19c
irq_set_irq_wake from irq_set_irq_wake+0x13c/0x19c
[tail call from sunxi_pinctrl_irq_set_wake]
irq_set_irq_wake from gpio_keys_suspend+0x80/0x1a4
gpio_keys_suspend from gpio_keys_shutdown+0x10/0x2c
gpio_keys_shutdown from device_shutdown+0x180/0x224
device_shutdown from __do_sys_reboot+0x134/0x23c
__do_sys_reboot from ret_fast_syscall+0x0/0x1c
However, this can never deadlock because the upstream and downstream
IRQs are never the same (nor do they even involve the same irqchip).
Silence this erroneous lockdep splat by applying what appears to be the
usual fix of moving the GPIO IRQs to separate lockdep classes.
Fixes: a59c99d9ea ("pinctrl: sunxi: Forward calls to irq_set_irq_wake")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220216040037.22730-1-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The commit that sets the direction directly without calling
pinctrl_gpio_direction(), forgot to add chip->base to the offset when
calling sunxi_pmx_gpio_set_direction().
This caused failures for various Allwinner boards which have two
GPIO blocks.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: 5kft <5kft@5kft.org>
Suggested-by: 5kft <5kft@5kft.org>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Fixes: 8df89a7cbc (pinctrl-sunxi: don't call pinctrl_gpio_direction())
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/0f536cd8-01db-5d16-2cec-ec6d19409a49@xs4all.nl
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[Picked from linux-next to pinctrl fixes]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Share more pin group data, to reduce kernel size and ease review,
- Improve the pin control table validator,
- Add support for the new R-Car S4-8 SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYhjYAwAKCRCKwlD9ZEnx
cM/kAP4p5s7qKyszT5A15RMzQJ6SWYwoP9td0PLZoLSw2iM05QD/d8+xy8jJR+0u
V0He7VSYWFaktJNycNiD5AeZzDVVxQs=
=PEc0
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.18-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.18 (take two)
- Share more pin group data, to reduce kernel size and ease review,
- Improve the pin control table validator,
- Add support for the new R-Car S4-8 SoC,
- Miscellaneous fixes and improvements.
Conversion of Samsung pinctrl bindings to dtschema followed up with
alignment of DTS files to the dtschema.
The entire work consists of three parts but everything should be merged
at once to avoid dtschema check errors:
1. Samsung pinctrl driver change necessary to accept new DTS (driver
depends on node names and this has to be adjusted because of dtschema).
2. Conversion to dtschema which brings requirement of different naming
of the GPIO nodes.
3. DTS commits depending on driver (1) above, which convert all GPIO pin
bank names to new naming, required by dtschema.
This also includes few cleanups around DTS which are here to avoid
any merge conflicts.
The Samsung pinctrl driver changes are backwards compatible. However
the DTS changes (renaming nodes) could cause problems in out-of-tree or
other project implementations of the driver.
-----BEGIN PGP SIGNATURE-----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=aFcq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CjdH
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-pinctrl-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung pinctrl DTS and driver changes for v5.18
Conversion of Samsung pinctrl bindings to dtschema followed up with
alignment of DTS files to the dtschema.
The entire work consists of three parts but everything should be merged
at once to avoid dtschema check errors:
1. Samsung pinctrl driver change necessary to accept new DTS (driver
depends on node names and this has to be adjusted because of dtschema).
2. Conversion to dtschema which brings requirement of different naming
of the GPIO nodes.
3. DTS commits depending on driver (1) above, which convert all GPIO pin
bank names to new naming, required by dtschema.
This also includes few cleanups around DTS which are here to avoid
any merge conflicts.
The Samsung pinctrl driver changes are backwards compatible. However
the DTS changes (renaming nodes) could cause problems in out-of-tree or
other project implementations of the driver.
* tag 'samsung-dt-pinctrl-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (28 commits)
arm64: dts: exynos: use dedicated wake-up pinctrl compatible in ExynosAutov9
ARM: dts: s5pv210: align pinctrl with dtschema
ARM: dts: s3c64xx: align pinctrl with dtschema
ARM: dts: s3c24xx: align pinctrl with dtschema
arm64: dts: exynos: align pinctrl with dtschema in ExynosAutov9
arm64: dts: exynos: align pinctrl with dtschema in Exynos7
arm64: dts: exynos: align pinctrl with dtschema in Exynos5433
ARM: dts: exynos: align pinctrl with dtschema in Exynos542x/5800
ARM: dts: exynos: align pinctrl with dtschema in Exynos5410
ARM: dts: exynos: align pinctrl with dtschema in Exynos5260
ARM: dts: exynos: align pinctrl with dtschema in Exynos5250
ARM: dts: exynos: align pinctrl with dtschema in Exynos4412
ARM: dts: exynos: align pinctrl with dtschema in Exynos4210
ARM: dts: exynos: align pinctrl with dtschema in Exynos3250
ARM: dts: s3c64xx: drop unneeded pinctrl wake-up interrupt mapping
ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pi
ARM: dts: exynos: override pins by label in Peach Pi
ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pit
ARM: dts: exynos: override pins by label in Peach Pit
ARM: dts: exynos: simplify PMIC DVS pin configuration in Odroid XU
...
Link: https://lore.kernel.org/r/20220129115352.13274-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add pins, groups, and function for the Clock-Synchronized Serial
Interfaces with FIFO (MSIOF) on the Renesas R-Car S4-8 (R8A779F0) SoC.
Based on a larger patch in the BSP by LUU HOAI.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/c625769714b1027a756dd2ed4a017eb24708a041.1645457792.git.geert+renesas@glider.be
Add pins, groups, and functions for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) on the Renesas R-Car S4-8 (R8A779F0) SoC.
Based on a larger patch in the BSP by LUU HOAI.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/2b85b8857c1189fa6ee33e2f57fe746d740481d1.1645457792.git.geert+renesas@glider.be
Add pins, groups, and functions for the Serial Communication Interfaces
with FIFO (SCIF) on the Renesas R-Car S4-8 (R8A779F0) SoC.
Extracted from a larger patch in the BSP by LUU HOAI.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/6369359a53483291ee536787c8a232462ff1b3a9.1645457792.git.geert+renesas@glider.be
Add initial Pin Function Controller (PFC) support for the Renesas R-Car
S4-8 (R8A779F0) SoC, including bias, drive strength and voltage control.
Based on a larger patch in the BSP by LUU HOAI.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/fd8201da404b7b0897130b254380ffc97f437266.1645457792.git.geert+renesas@glider.be
