syzbot reports following issue:
INFO: task syz-executor.2:12399 can't die for more than 143 seconds.
task:syz-executor.2 state:D stack:28744 pid:12399 ppid: 8504 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:3773 [inline]
__schedule+0x893/0x2170 kernel/sched/core.c:4522
schedule+0xcf/0x270 kernel/sched/core.c:4600
schedule_timeout+0x1d8/0x250 kernel/time/timer.c:1847
do_wait_for_common kernel/sched/completion.c:85 [inline]
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion+0x163/0x260 kernel/sched/completion.c:138
kthread_stop+0x17a/0x720 kernel/kthread.c:596
io_put_sq_data fs/io_uring.c:7193 [inline]
io_sq_thread_stop+0x452/0x570 fs/io_uring.c:7290
io_finish_async fs/io_uring.c:7297 [inline]
io_sq_offload_create fs/io_uring.c:8015 [inline]
io_uring_create fs/io_uring.c:9433 [inline]
io_uring_setup+0x19b7/0x3730 fs/io_uring.c:9507
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45deb9
Code: Unable to access opcode bytes at RIP 0x45de8f.
RSP: 002b:00007f174e51ac78 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9
RAX: ffffffffffffffda RBX: 0000000000008640 RCX: 000000000045deb9
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 00000000000050e5
RBP: 000000000118bf58 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118bf2c
R13: 00007ffed9ca723f R14: 00007f174e51b9c0 R15: 000000000118bf2c
INFO: task syz-executor.2:12399 blocked for more than 143 seconds.
Not tainted 5.10.0-rc3-next-20201110-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Currently we don't have a reproducer yet, but seems that there is a
race in current codes:
=> io_put_sq_data
ctx_list is empty now. |
==> kthread_park(sqd->thread); |
| T1: sq thread is parked now.
==> kthread_stop(sqd->thread); |
KTHREAD_SHOULD_STOP is set now.|
===> kthread_unpark(k); |
| T2: sq thread is now unparkd, run again.
|
| T3: sq thread is now preempted out.
|
===> wake_up_process(k); |
|
| T4: Since sqd ctx_list is empty, needs_sched will be true,
| then sq thread sets task state to TASK_INTERRUPTIBLE,
| and schedule, now sq thread will never be waken up.
===> wait_for_completion |
I have artificially used mdelay() to simulate above race, will get same
stack like this syzbot report, but to be honest, I'm not sure this code
race triggers syzbot report.
To fix this possible code race, when sq thread is unparked, need to check
whether sq thread has been stopped.
Reported-by: syzbot+03beeb595f074db9cfd1@syzkaller.appspotmail.com
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Double fixed files for splice/tee are done in a nasty way, it takes 2
ref_node refs, and during the second time it blindly overrides
req->fixed_file_refs hoping that it haven't changed. That works because
all that is done under iouring_lock in a single go but is error-prone.
Bind everything explicitly to a single ref_node and take only one ref,
with current ref_node ordering it's guaranteed to keep all files valid
awhile the request is inflight.
That's mainly a cleanup + preparation for generic resource handling,
but also saves pcpu_ref get/put for splice/tee with 2 fixed files.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As tasks now cancel only theirs requests, and inflight_wait is awaited
only in io_uring_cancel_files(), which should be called with ->in_idle
set, instead of keeping a separate inflight_wait use tctx->wait.
That will add some spurious wakeups but actually is safer from point of
not hanging the task.
e.g.
task1 | IRQ
| *start* io_complete_rw_common(link)
| link: req1 -> req2 -> req3(with files)
*cancel_files() |
io_wq_cancel(), etc. |
| put_req(link), adds to io-wq req2
schedule() |
So, task1 will never try to cancel req2 or req3. If req2 is
long-standing (e.g. read(empty_pipe)), this may hang.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't even allow not plain data msg_control, which is disallowed in
__sys_{send,revb}msg_sock(). So no need in fs for IORING_OP_SENDMSG and
IORING_OP_RECVMSG. fs->lock is less contanged not as much as before, but
there are cases that can be, e.g. IOSQE_ASYNC.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IORING_SETUP_SQPOLL is enabled, sqes are either handled in sq thread
task context or in io worker task context. If current task context is sq
thread, we don't need to check whether should wake up sq thread.
io_iopoll_req_issued() calls wq_has_sleeper(), which has smp_mb() memory
barrier, before this patch, perf shows obvious overhead:
Samples: 481K of event 'cycles', Event count (approx.): 299807382878
Overhead Comma Shared Object Symbol
3.69% :9630 [kernel.vmlinux] [k] io_issue_sqe
With this patch, perf shows:
Samples: 482K of event 'cycles', Event count (approx.): 299929547283
Overhead Comma Shared Object Symbol
0.70% :4015 [kernel.vmlinux] [k] io_issue_sqe
It shows some obvious improvements.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both IOPOLL and sqes handling need to acquire uring_lock, combine
them together, then we just need to acquire uring_lock once.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some static checker reports below warning:
fs/io_uring.c:6939 io_sq_thread()
error: uninitialized symbol 'timeout'.
This is a false positive, but let's just initialize 'timeout' to make
sure we don't trip over this.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are some issues about current io_sq_thread() implementation:
1. The prepare_to_wait() usage in __io_sq_thread() is weird. If
multiple ctxs share one same poll thread, one ctx will put poll thread
in TASK_INTERRUPTIBLE, but if other ctxs have work to do, we don't
need to change task's stat at all. I think only if all ctxs don't have
work to do, we can do it.
2. We use round-robin strategy to make multiple ctxs share one same
poll thread, but there are various condition in __io_sq_thread(), which
seems complicated and may affect round-robin strategy.
To improve above issues, I take below actions:
1. If multiple ctxs share one same poll thread, only if all all ctxs
don't have work to do, we can call prepare_to_wait() and schedule() to
make poll thread enter sleep state.
2. To make round-robin strategy more straight, I simplify
__io_sq_thread() a bit, it just does io poll and sqes submit work once,
does not check various condition.
3. For multiple ctxs share one same poll thread, we choose the biggest
sq_thread_idle among these ctxs as timeout condition, and will update
it when ctx is in or out.
4. Not need to check EBUSY especially, if io_submit_sqes() returns
EBUSY, IORING_SQ_CQ_OVERFLOW should be set, helper in liburing should
be aware of cq overflow and enters kernel to flush work.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of iterating over each request and cancelling it individually in
io_uring_cancel_files(), try to cancel all matching requests and use
->inflight_list only to check if there anything left.
In many cases it should be faster, and we can reuse a lot of code from
task cancellation.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make io_poll_remove_all() and io_kill_timeouts() to match against files
as well. A preparation patch, effectively not used by now.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_cancel_files() guarantees to cancel all matching requests,
that's not necessary to do that in a loop. Move it up in the callchain
into io_uring_cancel_task_requests().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_cancel_files() cancels all request that match files regardless
of task. There is no real need in that, cancel only requests of the
specified task. That also handles SQPOLL case as it already changes task
to it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add io_match_task() that matches both task and files.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IORING_SETUP_SQPOLL is set all requests belong to the corresponding
SQPOLL task, so skip task checking in that case and always match.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inline io_import_iovec() and leave only its former __io_import_iovec()
renamed to the original name. That makes it more obious what is reused in
io_read/write().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_size and iov_count in io_read() and io_write() hold the same value,
kill the last one.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is the only code that relies on import_iovec() returning
iter.count on success.
This allows a better interface to import_iovec().
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now users who want to get woken when waiting for events should submit a
timeout command first. It is not safe for applications that split SQ and
CQ handling between two threads, such as mysql. Users should synchronize
the two threads explicitly to protect SQ and that will impact the
performance.
This patch adds support for timeout to existing io_uring_enter(). To
avoid overloading arguments, it introduces a new parameter structure
which contains sigmask and timeout.
I have tested the workloads with one thread submiting nop requests
while the other reaping the cqe with timeout. It shows 1.8~2x faster
when the iodepth is 16.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
[axboe: various cleanups/fixes, and name change to SIG_IS_DATA]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We unconditionally call blk_start_plug() when starting the IO
submission, but we only really should do that if we have more than 1
request to submit AND we're potentially dealing with block based storage
underneath. For any other type of request, it's just a waste of time to
do so.
Add a ->plug bit to io_op_def and set it for read/write requests. We
could make this more precise and check the file itself as well, but it
doesn't matter that much and would quickly become more expensive.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've got extra 8 bytes in the 2nd cacheline, put ->fixed_file_refs
there, so inline execution path mostly doesn't touch the 3rd cacheline
for fixed_file requests as well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Singly linked list for keeping linked requests is enough, because we
almost always operate on the head and traverse forward with the
exception of linked timeouts going 1 hop backwards.
Replace ->link_list with a handmade singly linked list. Also kill
REQ_F_LINK_HEAD in favour of checking a newly added ->list for NULL
directly.
That saves 8B in io_kiocb, is not as heavy as list fixup, makes better
use of cache by not touching a previous request (i.e. last request of
the link) each time on list modification and optimises cache use further
in the following patch, and actually makes travesal easier removing in
the end some lines. Also, keeping invariant in ->list instead of having
REQ_F_LINK_HEAD is less error-prone.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for converting singly linked lists for chaining requests,
make linked timeouts save requests that they're responsible for and not
count on doubly linked list for back referencing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Explicitly save not only a link's head in io_submit_sqe[s]() but the
tail as well. That's in preparation for keeping linked requests in a
singly linked list.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't use a single struct for polls and poll remove requests, they have
totally different layouts.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that SQPOLL supports non-registered files and grabs the file table,
we can relax the restriction on open/close/accept/connect and allow
them on a ring that is setup with IORING_SETUP_SQPOLL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The restriction of needing fixed files for SQPOLL is problematic, and
prevents/inhibits several valid uses cases. With the referenced
files_struct that we have now, it's trivially supportable.
Treat ->files like we do the mm for the SQPOLL thread - grab a reference
to it (and assign it), and drop it when we're done.
This feature is exposed as IORING_FEAT_SQPOLL_NONFIXED.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After io_identity_cow() copies an work.identity it wants to copy creds
to the new just allocated id, not the old one. Otherwise it's
akin to req->work.identity->creds = req->work.identity->creds.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, the sock_from_file prototype takes an "err" pointer that is
either not set or set to -ENOTSOCK IFF the returned socket is NULL. This
makes the error redundant and it is ignored by a few callers.
This patch simplifies the API by letting callers deduce the error based
on whether the returned socket is NULL or not.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Florent Revest <revest@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20201204113609.1850150-1-revest@google.com
Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case). This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_compat_recvmsg_copy_hdr() with REQ_F_BUFFER_SELECT reads out iov
len but never assigns it to iov/fast_iov, leaving sr->len with garbage.
Hopefully, following io_buffer_select() truncates it to the selected
buffer size, but the value is still may be under what was specified.
Cc: <stable@vger.kernel.org> # 5.7
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When one task is in io_uring_cancel_files() and another is doing
io_prep_async_work() a race may happen. That's because after accounting
a request inflight in first call to io_grab_identity() it still may fail
and go to io_identity_cow(), which migh briefly keep dangling
work.identity and not only.
Grab files last, so io_prep_async_work() won't fail if it did get into
->inflight_list.
note: the bug shouldn't exist after making io_uring_cancel_files() not
poking into other tasks' requests.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iov_iter::type is a bitmask that also keeps direction etc., so it
shouldn't be directly compared against ITER_*. Use proper helper.
Fixes: ff6165b2d7 ("io_uring: retain iov_iter state over io_read/io_write calls")
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Cc: <stable@vger.kernel.org> # 5.9
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Abaci Fuzz reported a shift-out-of-bounds BUG in io_uring_create():
[ 59.598207] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ 59.599665] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ 59.601230] CPU: 0 PID: 963 Comm: a.out Not tainted 5.10.0-rc4+ #3
[ 59.602502] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 59.603673] Call Trace:
[ 59.604286] dump_stack+0x107/0x163
[ 59.605237] ubsan_epilogue+0xb/0x5a
[ 59.606094] __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e
[ 59.607335] ? lock_downgrade+0x6c0/0x6c0
[ 59.608182] ? rcu_read_lock_sched_held+0xaf/0xe0
[ 59.609166] io_uring_create.cold+0x99/0x149
[ 59.610114] io_uring_setup+0xd6/0x140
[ 59.610975] ? io_uring_create+0x2510/0x2510
[ 59.611945] ? lockdep_hardirqs_on_prepare+0x286/0x400
[ 59.613007] ? syscall_enter_from_user_mode+0x27/0x80
[ 59.614038] ? trace_hardirqs_on+0x5b/0x180
[ 59.615056] do_syscall_64+0x2d/0x40
[ 59.615940] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 59.617007] RIP: 0033:0x7f2bb8a0b239
This is caused by roundup_pow_of_two() if the input entries larger
enough, e.g. 2^32-1. For sq_entries, it will check first and we allow
at most IORING_MAX_ENTRIES, so it is okay. But for cq_entries, we do
round up first, that may overflow and truncate it to 0, which is not
the expected behavior. So check the cq size first and then do round up.
Fixes: 88ec3211e4 ("io_uring: round-up cq size before comparing with rounded sq size")
Reported-by: Abaci Fuzz <abaci@linux.alibaba.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for the shutdown(2) system call, which is useful for
dealing with sockets.
shutdown(2) may block, so we have to punt it to async context.
Suggested-by: Norman Maurer <norman.maurer@googlemail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
CAP_SYS_ADMIN is too restrictive for a lot of uses cases, allow
CAP_SYS_NICE based on the premise that such users are already allowed
to raise the priority of tasks.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl+4DAwQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgphdOD/9xOEnYPuekvVH9G9nyNd//Q9fPArG2+j6V
/MCnze07GNtDt7z15oR+T07hKXmf+Ejh4nu3JJ6MUNfe/47hhJqHSxRHU6+PJCjk
hPrsaTsDedxxLEDiLmvhXnUPzfVzJtefxVAAaKikWOb3SBqLdh7xTFSlor1HbRBl
Zk4d343cjBDYfvSSt/zMWDzwwvramdz7rJnnPMKXITu64ITL5314vuK2YVZmBOet
YujSah7J8FL1jKhiG1Iw5rayd2Q3smnHWIEQ+lvW6WiTvMJMLOxif2xNF4/VEZs1
CBGJUQt42LI6QGEzRBHohcefZFuPGoxnduSzHCOIhh7d6+k+y9mZfsPGohr3g9Ov
NotXpVonnA7GbRqzo1+IfBRve7iRONdZ3/LBwyRmqav4I4jX68wXBNH5IDpVR0Sn
c31avxa/ZL7iLIBx32enp0/r3mqNTQotEleSLUdyJQXAZTyG2INRhjLLXTqSQ5BX
oVp0fZzKCwsr6HCPZpXZ/f2G7dhzuF0ghoceC02GsOVooni22gdVnQj+AWNus398
e+wcimT4MX6AHNFxO2aUtJow0KWWZRzC1p5Mxu/9W3YiMtJiC0YOGePfSqiTqX0g
Uk0H5dOAgBUQrAsusf7bKr0K6W25yEk/JipxhWqi0rC71x42mLTsCT1wxSCvLwqs
WxhdtVKroQ==
=7PAe
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.10-2020-11-20' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Mostly regression or stable fodder:
- Disallow async path resolution of /proc/self
- Tighten constraints for segmented async buffered reads
- Fix double completion for a retry error case
- Fix for fixed file life times (Pavel)"
* tag 'io_uring-5.10-2020-11-20' of git://git.kernel.dk/linux-block:
io_uring: order refnode recycling
io_uring: get an active ref_node from files_data
io_uring: don't double complete failed reissue request
mm: never attempt async page lock if we've transferred data already
io_uring: handle -EOPNOTSUPP on path resolution
proc: don't allow async path resolution of /proc/self components
Don't recycle a refnode until we're done with all requests of nodes
ejected before.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An active ref_node always can be found in ctx->files_data, it's much
safer to get it this way instead of poking into files_data->ref_list.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zorro reports that an xfstest test case is failing, and it turns out that
for the reissue path we can potentially issue a double completion on the
request for the failure path. There's an issue around the retry as well,
but for now, at least just make sure that we handle the error path
correctly.
Cc: stable@vger.kernel.org
Fixes: b63534c41e ("io_uring: re-issue block requests that failed because of resources")
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Any attempt to do path resolution on /proc/self from an async worker will
yield -EOPNOTSUPP. We can safely do that resolution from the task itself,
and without blocking, so retry it from there.
Ideally io_uring would know this upfront and not have to go through the
worker thread to find out, but that doesn't currently seem feasible.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Minor cleanups of the sb_start_* fs freeze helpers.
-----BEGIN PGP SIGNATURE-----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=ZC9a
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.10-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull fs freeze fix and cleanups from Darrick Wong:
"A single vfs fix for 5.10, along with two subsequent cleanups.
A very long time ago, a hack was added to the vfs fs freeze protection
code to work around lockdep complaints about XFS, which would try to
run a transaction (which requires intwrite protection) to finalize an
xfs freeze (by which time the vfs had already taken intwrite).
Fast forward a few years, and XFS fixed the recursive intwrite problem
on its own, and the hack became unnecessary. Fast forward almost a
decade, and latent bugs in the code converting this hack from freeze
flags to freeze locks combine with lockdep bugs to make this reproduce
frequently enough to notice page faults racing with freeze.
Since the hack is unnecessary and causes thread race errors, just get
rid of it completely. Making this kind of vfs change midway through a
cycle makes me nervous, but a large enough number of the usual
VFS/ext4/XFS/btrfs suspects have said this looks good and solves a
real problem vector.
And once that removal is done, __sb_start_write is now simple enough
that it becomes possible to refactor the function into smaller,
simpler static inline helpers in linux/fs.h. The cleanup is
straightforward.
Summary:
- Finally remove the "convert to trylock" weirdness in the fs freezer
code. It was necessary 10 years ago to deal with nested
transactions in XFS, but we've long since removed that; and now
this is causing subtle race conditions when lockdep goes offline
and sb_start_* aren't prepared to retry a trylock failure.
- Minor cleanups of the sb_start_* fs freeze helpers"
* tag 'vfs-5.10-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: move __sb_{start,end}_write* to fs.h
vfs: separate __sb_start_write into blocking and non-blocking helpers
vfs: remove lockdep bogosity in __sb_start_write
If an application specifies IORING_SETUP_CQSIZE to set the CQ ring size
to a specific size, we ensure that the CQ size is at least that of the
SQ ring size. But in doing so, we compare the already rounded up to power
of two SQ size to the as-of yet unrounded CQ size. This means that if an
application passes in non power of two sizes, we can return -EINVAL when
the final value would've been fine. As an example, an application passing
in 100/100 for sq/cq size should end up with 128 for both. But since we
round the SQ size first, we compare the CQ size of 100 to 128, and return
-EINVAL as that is too small.
Cc: stable@vger.kernel.org
Fixes: 33a107f0a1 ("io_uring: allow application controlled CQ ring size")
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Break this function into two helpers so that it's obvious that the
trylock versions return a value that must be checked, and the blocking
versions don't require that. While we're at it, clean up the return
type mismatch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We can't just go over linked requests because it may race with linked
timeouts. Take ctx->completion_lock in that case.
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previous commit changed how we index the registered credentials, but
neglected to update one spot that is used when the personalities are
iterated through ->show_fdinfo(). Ensure we use the right struct type
for the iteration.
Reported-by: syzbot+a6d494688cdb797bdfce@syzkaller.appspotmail.com
Fixes: 1e6fa5216a ("io_uring: COW io_identity on mismatch")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If there is a long-standing request of one task locking up execution of
deferred requests, and the defer list contains requests of another task
(all files-less), then a potential execution of __io_uring_task_cancel()
by that another task will sleep until that first long-standing request
completion, and that may take long.
E.g.
tsk1: req1/read(empty_pipe) -> tsk2: req(DRAIN)
Then __io_uring_task_cancel(tsk2) waits for req1 completion.
It seems we even can manufacture a complicated case with many tasks
sharing many rings that can lock them forever.
Cancel deferred requests for __io_uring_task_cancel() as well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current io_match_files() check in io_cqring_overflow_flush() is useless
because requests drop ->files before going to the overflow list, however
linked to it request do not, and we don't check them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can't bundle this into one operation, as the identity may not have
originated from the tctx to begin with. Drop one ref for each of them
separately, if they don't match the static assignment. If we don't, then
if the identity is a lookup from registered credentials, we could be
freeing that identity as we're dropping a reference assuming it came from
the tctx. syzbot reports this as a use-after-free, as the identity is
still referencable from idr lookup:
==================================================================
BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
BUG: KASAN: use-after-free in atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline]
BUG: KASAN: use-after-free in __refcount_add include/linux/refcount.h:193 [inline]
BUG: KASAN: use-after-free in __refcount_inc include/linux/refcount.h:250 [inline]
BUG: KASAN: use-after-free in refcount_inc include/linux/refcount.h:267 [inline]
BUG: KASAN: use-after-free in io_init_req fs/io_uring.c:6700 [inline]
BUG: KASAN: use-after-free in io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774
Write of size 4 at addr ffff888011e08e48 by task syz-executor165/8487
CPU: 1 PID: 8487 Comm: syz-executor165 Not tainted 5.10.0-rc1-next-20201102-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562
check_memory_region_inline mm/kasan/generic.c:186 [inline]
check_memory_region+0x13d/0x180 mm/kasan/generic.c:192
instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline]
__refcount_add include/linux/refcount.h:193 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
io_init_req fs/io_uring.c:6700 [inline]
io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774
__do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x440e19
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 0f fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff644ff178 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000440e19
RDX: 0000000000000000 RSI: 000000000000450c RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000022b4850
R13: 0000000000000010 R14: 0000000000000000 R15: 0000000000000000
Allocated by task 8487:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:461
kmalloc include/linux/slab.h:552 [inline]
io_register_personality fs/io_uring.c:9638 [inline]
__io_uring_register fs/io_uring.c:9874 [inline]
__do_sys_io_uring_register+0x10f0/0x40a0 fs/io_uring.c:9924
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 8487:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355
__kasan_slab_free+0x102/0x140 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook+0x5d/0x150 mm/slub.c:1577
slab_free mm/slub.c:3140 [inline]
kfree+0xdb/0x360 mm/slub.c:4122
io_identity_cow fs/io_uring.c:1380 [inline]
io_prep_async_work+0x903/0xbc0 fs/io_uring.c:1492
io_prep_async_link fs/io_uring.c:1505 [inline]
io_req_defer fs/io_uring.c:5999 [inline]
io_queue_sqe+0x212/0xed0 fs/io_uring.c:6448
io_submit_sqe fs/io_uring.c:6542 [inline]
io_submit_sqes+0x14f6/0x25f0 fs/io_uring.c:6784
__do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff888011e08e00
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 72 bytes inside of
96-byte region [ffff888011e08e00, ffff888011e08e60)
The buggy address belongs to the page:
page:00000000a7104751 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e08
flags: 0xfff00000000200(slab)
raw: 00fff00000000200 ffffea00004f8540 0000001f00000002 ffff888010041780
raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888011e08d00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888011e08d80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
> ffff888011e08e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888011e08e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888011e08f00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
==================================================================
Reported-by: syzbot+625ce3bb7835b63f7f3d@syzkaller.appspotmail.com
Fixes: 1e6fa5216a ("io_uring: COW io_identity on mismatch")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure we get a valid view of the task mm, by using task_lock() when
attempting to grab the original task mm.
Reported-by: syzbot+b57abf7ee60829090495@syzkaller.appspotmail.com
Fixes: 2aede0e417 ("io_uring: stash ctx task reference for SQPOLL")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Track if a given task io_uring context contains SQPOLL instances, so we
can iterate those for cancelation (and request counts). This ensures that
we properly wait on SQPOLL contexts, and find everything that needs
canceling.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=xYFz
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.10-2020-10-30' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fixes for linked timeouts (Pavel)
- Set IO_WQ_WORK_CONCURRENT early for async offload (Pavel)
- Two minor simplifications that make the code easier to read and
follow (Pavel)
* tag 'io_uring-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
io_uring: use type appropriate io_kiocb handler for double poll
io_uring: simplify __io_queue_sqe()
io_uring: simplify nxt propagation in io_queue_sqe
io_uring: don't miss setting IO_WQ_WORK_CONCURRENT
io_uring: don't defer put of cancelled ltimeout
io_uring: always clear LINK_TIMEOUT after cancel
io_uring: don't adjust LINK_HEAD in cancel ltimeout
io_uring: remove opcode check on ltimeout kill
io_poll_double_wake() is called for both request types - both pure poll
requests, and internal polls. This means that we should be using the
right handler based on the request type. Use the one that the original
caller already assigned for the waitqueue handling, that will always
match the correct type.
Cc: stable@vger.kernel.org # v5.8+
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=xidc
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- fsize was missed in previous unification of work flags
- Few fixes cleaning up the flags unification creds cases (Pavel)
- Fix NUMA affinities for completely unplugged/replugged node for io-wq
- Two fallout fixes from the set_fs changes. One local to io_uring, one
for the splice entry point that io_uring uses.
- Linked timeout fixes (Pavel)
- Removal of ->flush() ->files work-around that we don't need anymore
with referenced files (Pavel)
- Various cleanups (Pavel)
* tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block:
splice: change exported internal do_splice() helper to take kernel offset
io_uring: make loop_rw_iter() use original user supplied pointers
io_uring: remove req cancel in ->flush()
io-wq: re-set NUMA node affinities if CPUs come online
io_uring: don't reuse linked_timeout
io_uring: unify fsize with def->work_flags
io_uring: fix racy REQ_F_LINK_TIMEOUT clearing
io_uring: do poll's hash_node init in common code
io_uring: inline io_poll_task_handler()
io_uring: remove extra ->file check in poll prep
io_uring: make cached_cq_overflow non atomic_t
io_uring: inline io_fail_links()
io_uring: kill ref get/drop in personality init
io_uring: flags-based creds init in queue
Restructure __io_queue_sqe() so it follows simple if/else if/else
control flow. It's more readable and removes extra goto/labels.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't overuse goto's, complex control flow doesn't make compilers happy
and makes code harder to read.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set IO_WQ_WORK_CONCURRENT for all REQ_F_FORCE_ASYNC requests, do that in
that is also looks better.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inline io_link_cancel_timeout() and __io_kill_linked_timeout() into
io_kill_linked_timeout(). That allows to easily move a put of a cancelled
linked timeout out of completion_lock and to not deferring it. It is also
much more readable when not scattered across three different functions.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move REQ_F_LINK_TIMEOUT clearing out of __io_kill_linked_timeout()
because it might return early and leave the flag set. It's not a
problem, but may be confusing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An armed linked timeout can never be a head of a link, so we don't need
to clear REQ_F_LINK_HEAD for it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_kill_linked_timeout() already checks for REQ_F_LTIMEOUT_ACTIVE and
it's set only for linked timeouts. No need to verify next request's
opcode.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=aVWo
-----END PGP SIGNATURE-----
Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
We jump through a hoop for fixed buffers, where we first map these to
a bvec(), then kmap() the bvec to obtain the pointer we copy to/from.
This was always a bit ugly, and with the set_fs changes, it ends up
being practically problematic as well.
There's no need to jump through these hoops, just use the original user
pointers and length for the non iter based read/write.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every close(io_uring) causes cancellation of all inflight requests
carrying ->files. That's not nice but was neccessary up until recently.
Now task->files removal is handled in the core code, so that part of
flush can be removed.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Clear linked_timeout for next requests in __io_queue_sqe() so we won't
queue it up unnecessary when it's going to be punted.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Cc: stable@vger.kernel.org # v5.9
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This one was missed in the earlier conversion, should be included like
any of the other IO identity flags. Make sure we restore to RLIM_INIFITY
when dropping the personality again.
Fixes: 98447d65b4 ("io_uring: move io identity items into separate struct")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=v56S
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.10-2020-10-20' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"A mix of fixes and a few stragglers. In detail:
- Revert the bogus __read_mostly that we discussed for the initial
pull request.
- Fix a merge window regression with fixed file registration error
path handling.
- Fix io-wq numa node affinities.
- Series abstracting out an io_identity struct, making it both easier
to see what the personality items are, and also easier to to adopt
more. Use this to cover audit logging.
- Fix for read-ahead disabled block condition in async buffered
reads, and using single page read-ahead to unify what
generic_file_buffer_read() path is used.
- Series for REQ_F_COMP_LOCKED fix and removal of it (Pavel)
- Poll fix (Pavel)"
* tag 'io_uring-5.10-2020-10-20' of git://git.kernel.dk/linux-block: (21 commits)
io_uring: use blk_queue_nowait() to check if NOWAIT supported
mm: use limited read-ahead to satisfy read
mm: mark async iocb read as NOWAIT once some data has been copied
io_uring: fix double poll mask init
io-wq: inherit audit loginuid and sessionid
io_uring: use percpu counters to track inflight requests
io_uring: assign new io_identity for task if members have changed
io_uring: store io_identity in io_uring_task
io_uring: COW io_identity on mismatch
io_uring: move io identity items into separate struct
io_uring: rely solely on work flags to determine personality.
io_uring: pass required context in as flags
io-wq: assign NUMA node locality if appropriate
io_uring: fix error path cleanup in io_sqe_files_register()
Revert "io_uring: mark io_uring_fops/io_op_defs as __read_mostly"
io_uring: fix REQ_F_COMP_LOCKED by killing it
io_uring: dig out COMP_LOCK from deep call chain
io_uring: don't put a poll req under spinlock
io_uring: don't unnecessarily clear F_LINK_TIMEOUT
io_uring: don't set COMP_LOCKED if won't put
...
io_link_timeout_fn() removes REQ_F_LINK_TIMEOUT from the link head's
flags, it's not atomic and may race with what the head is doing.
If io_link_timeout_fn() doesn't clear the flag, as forced by this patch,
then it may happen that for "req -> link_timeout1 -> link_timeout2",
__io_kill_linked_timeout() would find link_timeout2 and try to cancel
it, so miscounting references. Teach it to ignore such double timeouts
by marking the active one with a new flag in io_prep_linked_timeout().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move INIT_HLIST_NODE(&req->hash_node) into __io_arm_poll_handler(), so
that it doesn't duplicated and common poll code would be responsible for
it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_poll_task_handler() doesn't add clarity, inline it in its only user.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_poll_add_prep() doesn't need to verify ->file because it's already
done in io_init_req().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ctx->cached_cq_overflow is changed only under completion_lock. Convert
it from atomic_t to just int, and mark all places when it's read without
lock with READ_ONCE, which guarantees atomicity (relaxed ordering).
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inline io_fail_links() and kill extra io_cqring_ev_posted().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't take an identity on personality/creds init only to drop it a few
lines after. Extract a function which prepares req->work but leaves it
without identity.
Note: it's safe to not check REQ_F_WORK_INITIALIZED there because it's
nobody had a chance to init it before io_init_req().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use IO_WQ_WORK_CREDS to figure out if req has creds to be used.
Since recently it should rely only on flags, but not value of
work.creds.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 021a24460d ("block: add QUEUE_FLAG_NOWAIT") adds a new helper
function blk_queue_nowait() to check if the bdev supports handling of
REQ_NOWAIT or not. Since then bio-based dm device can also support
REQ_NOWAIT, and currently only dm-linear supports that since
commit 6abc49468e ("dm: add support for REQ_NOWAIT and enable it for
linear target").
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Patch series "introduce memory hinting API for external process", v9.
Now, we have MADV_PAGEOUT and MADV_COLD as madvise hinting API. With
that, application could give hints to kernel what memory range are
preferred to be reclaimed. However, in some platform(e.g., Android), the
information required to make the hinting decision is not known to the app.
Instead, it is known to a centralized userspace daemon(e.g.,
ActivityManagerService), and that daemon must be able to initiate reclaim
on its own without any app involvement.
To solve the concern, this patch introduces new syscall -
process_madvise(2). Bascially, it's same with madvise(2) syscall but it
has some differences.
1. It needs pidfd of target process to provide the hint
2. It supports only MADV_{COLD|PAGEOUT|MERGEABLE|UNMEREABLE} at this
moment. Other hints in madvise will be opened when there are explicit
requests from community to prevent unexpected bugs we couldn't support.
3. Only privileged processes can do something for other process's
address space.
For more detail of the new API, please see "mm: introduce external memory
hinting API" description in this patchset.
This patch (of 3):
In upcoming patches, do_madvise will be called from external process
context so we shouldn't asssume "current" is always hinted process's
task_struct.
Furthermore, we must not access mm_struct via task->mm, but obtain it via
access_mm() once (in the following patch) and only use that pointer [1],
so pass it to do_madvise() as well. Note the vma->vm_mm pointers are
safe, so we can use them further down the call stack.
And let's pass current->mm as arguments of do_madvise so it shouldn't
change existing behavior but prepare next patch to make review easy.
[vbabka@suse.cz: changelog tweak]
[minchan@kernel.org: use current->mm for io_uring]
Link: http://lkml.kernel.org/r/20200423145215.72666-1-minchan@kernel.org
[akpm@linux-foundation.org: fix it for upstream changes]
[akpm@linux-foundation.org: whoops]
[rdunlap@infradead.org: add missing includes]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jann Horn <jannh@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Daniel Colascione <dancol@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: John Dias <joaodias@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200901000633.1920247-1-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200622192900.22757-1-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200302193630.68771-2-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200622192900.22757-2-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-2-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A previous commit changed the notification mode from true/false to an
int, allowing notify-no, notify-yes, or signal-notify. This was
backwards compatible in the sense that any existing true/false user
would translate to either 0 (on notification sent) or 1, the latter
which mapped to TWA_RESUME. TWA_SIGNAL was assigned a value of 2.
Clean this up properly, and define a proper enum for the notification
mode. Now we have:
- TWA_NONE. This is 0, same as before the original change, meaning no
notification requested.
- TWA_RESUME. This is 1, same as before the original change, meaning
that we use TIF_NOTIFY_RESUME.
- TWA_SIGNAL. This uses TIF_SIGPENDING/JOBCTL_TASK_WORK for the
notification.
Clean up all the callers, switching their 0/1/false/true to using the
appropriate TWA_* mode for notifications.
Fixes: e91b481623 ("task_work: teach task_work_add() to do signal_wake_up()")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_queue_proc() is used by both, poll reqs and apoll. Don't use
req->poll.events to copy poll mask because for apoll it aliases with
private data of the request.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure the async io-wq workers inherit the loginuid and sessionid from
the original task, and restore them to unset once we're done with the
async work item.
While at it, disable the ability for kernel threads to write to their own
loginuid.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Even though we place the req_issued and req_complete in separate
cachelines, there's considerable overhead in doing the atomics
particularly on the completion side.
Get rid of having the two counters, and just use a percpu_counter for
this. That's what it was made for, after all. This considerably
reduces the overhead in __io_free_req().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This avoids doing a copy for each new async IO, if some parts of the
io_identity has changed. We avoid reference counting for the normal
fast path of nothing ever changing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is, by definition, a per-task structure. So store it in the
task context, instead of doing carrying it in each io_kiocb. We're being
a bit inefficient if members have changed, as that requires an alloc and
copy of a new io_identity struct. The next patch will fix that up.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the io_identity doesn't completely match the task, then create a
copy of it and use that. The existing copy remains valid until the last
user of it has gone away.
This also changes the personality lookup to be indexed by io_identity,
instead of creds directly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq contains a pointer to the identity, which we just hold in io_kiocb
for now. This is in preparation for putting this outside io_kiocb. The
only exception is struct files_struct, which we'll need different rules
for to avoid a circular dependency.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We solely rely on work->work_flags now, so use that for proper checking
and clearing/dropping of various identity items.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have a number of bits that decide what context to inherit. Set up
io-wq flags for these instead. This is in preparation for always having
the various members set, but not always needing them for all requests.
No intended functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 738277adc8.
This change didn't make a lot of sense, and as Linus reports, it actually
fails on clang:
/tmp/io_uring-dd40c4.s:26476: Warning: ignoring changed section
attributes for .data..read_mostly
The arrays are already marked const so, by definition, they are not
just read-mostly, they are read-only.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_F_COMP_LOCKED is used and implemented in a buggy way. The problem is
that the flag is set before io_put_req() but not cleared after, and if
that wasn't the final reference, the request will be freed with the flag
set from some other context, which may not hold a spinlock. That means
possible races with removing linked timeouts and unsynchronised
completion (e.g. access to CQ).
Instead of fixing REQ_F_COMP_LOCKED, kill the flag and use
task_work_add() to move such requests to a fresh context to free from
it, as was done with __io_free_req_finish().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_req_clean_work() checks REQ_F_COMP_LOCK to pass this two layers up.
Move the check up into __io_free_req(), so at least it doesn't looks so
ugly and would facilitate further changes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move io_put_req() in io_poll_task_handler() from under spinlock. This
eliminates the need to use REQ_F_COMP_LOCKED, at the expense of
potentially having to grab the lock again. That's still a better trade
off than relying on the locked flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a request had REQ_F_LINK_TIMEOUT it would've been cleared in
__io_kill_linked_timeout() by the time of __io_fail_links(), so no need
to care about it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_kill_linked_timeout() sets REQ_F_COMP_LOCKED for a linked timeout
even if it can't cancel it, e.g. it's already running. It not only races
with io_link_timeout_fn() for ->flags field, but also leaves the flag
set and so io_link_timeout_fn() may find it and decide that it holds the
lock. Hopefully, the second problem is potential.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An incorrect sizeof() is being used, sizeof(file_data->table) is not
correct, it should be sizeof(*file_data->table).
Fixes: 5398ae6985 ("io_uring: clean file_data access in files_register")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
-----BEGIN PGP SIGNATURE-----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=udgj
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- Add blkcg accounting for io-wq offload (Dennis)
- A use-after-free fix for io-wq (Hillf)
- Cancelation fixes and improvements
- Use proper files_struct references for offload
- Cleanup of io_uring_get_socket() since that can now go into our own
header
- SQPOLL fixes and cleanups, and support for sharing the thread
- Improvement to how page accounting is done for registered buffers and
huge pages, accounting the real pinned state
- Series cleaning up the xarray code (Willy)
- Various cleanups, refactoring, and improvements (Pavel)
- Use raw spinlock for io-wq (Sebastian)
- Add support for ring restrictions (Stefano)
* tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (62 commits)
io_uring: keep a pointer ref_node in file_data
io_uring: refactor *files_register()'s error paths
io_uring: clean file_data access in files_register
io_uring: don't delay io_init_req() error check
io_uring: clean leftovers after splitting issue
io_uring: remove timeout.list after hrtimer cancel
io_uring: use a separate struct for timeout_remove
io_uring: improve submit_state.ios_left accounting
io_uring: simplify io_file_get()
io_uring: kill extra check in fixed io_file_get()
io_uring: clean up ->files grabbing
io_uring: don't io_prep_async_work() linked reqs
io_uring: Convert advanced XArray uses to the normal API
io_uring: Fix XArray usage in io_uring_add_task_file
io_uring: Fix use of XArray in __io_uring_files_cancel
io_uring: fix break condition for __io_uring_register() waiting
io_uring: no need to call xa_destroy() on empty xarray
io_uring: batch account ->req_issue and task struct references
io_uring: kill callback_head argument for io_req_task_work_add()
io_uring: move req preps out of io_issue_sqe()
...
Pull compat iovec cleanups from Al Viro:
"Christoph's series around import_iovec() and compat variant thereof"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
security/keys: remove compat_keyctl_instantiate_key_iov
mm: remove compat_process_vm_{readv,writev}
fs: remove compat_sys_vmsplice
fs: remove the compat readv/writev syscalls
fs: remove various compat readv/writev helpers
iov_iter: transparently handle compat iovecs in import_iovec
iov_iter: refactor rw_copy_check_uvector and import_iovec
iov_iter: move rw_copy_check_uvector() into lib/iov_iter.c
compat.h: fix a spelling error in <linux/compat.h>
->cur_refs of struct fixed_file_data always points to percpu_ref
embedded into struct fixed_file_ref_node. Don't overuse container_of()
and offsetting, and point directly to fixed_file_ref_node.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't keep repeating cleaning sequences in error paths, write it once
in the and use labels. It's less error prone and looks cleaner.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keep file_data in a local var and replace with it complex references
such as ctx->file_data.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't postpone io_init_req() error checks and do that right after
calling it. There is no control-flow statements or dependencies with
sqe/submitted accounting, so do those earlier, that makes the code flow
a bit more natural.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kill extra if in io_issue_sqe() and place send/recv[msg] calls
appropriately under switch's cases.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove timeouts from ctx->timeout_list after hrtimer_try_to_cancel()
successfully cancels it. With this we don't need to care whether there
was a race and it was removed in io_timeout_fn(), and that will be handy
for following patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't use struct io_timeout for both IORING_OP_TIMEOUT and
IORING_OP_TIMEOUT_REMOVE, they're quite different. Split them in two,
that allows to remove an unused field in struct io_timeout, and btw kill
->flags not used by either. This also easier to follow, especially for
timeout remove.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
state->ios_left isn't decremented for requests that don't need a file,
so it might be larger than number of SQEs left. That in some
circumstances makes us to grab more files that is needed so imposing
extra put.
Deaccount one ios_left for each request.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keep ->needs_file_no_error check out of io_file_get(), and let callers
handle it. It makes it more straightforward. Also, as the only error it
can hand back -EBADF, make it return a file or NULL.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ctx->nr_user_files == 0 IFF ctx->file_data == NULL and there fixed files
are not used. Hence, verifying fds only against ctx->nr_user_files is
enough. Remove the other check from hot path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move work.files grabbing into io_prep_async_work() to all other work
resources initialisation. We don't need to keep it separately now, as
->ring_fd/file are gone. It also allows to not grab it when a request
is not going to io-wq.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no real reason left for preparing io-wq work context for linked
requests in advance, remove it as this might become a bottleneck in some
cases.
Reported-by: Roman Gershman <romger@amazon.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are no bugs here that I've spotted, it's just easier to use the
normal API and there are no performance advantages to using the more
verbose advanced API.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The xas_store() wasn't paired with an xas_nomem() loop, so if it couldn't
allocate memory using GFP_NOWAIT, it would leak the reference to the file
descriptor. Also the node pointed to by the xas could be freed between
the call to xas_load() under the rcu_read_lock() and the acquisition of
the xa_lock.
It's easier to just use the normal xa_load/xa_store interface here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
[axboe: fix missing assign after alloc, cur_uring -> tctx rename]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have to drop the lock during each iteration, so there's no advantage
to using the advanced API. Convert this to a standard xa_for_each() loop.
Reported-by: syzbot+27c12725d8ff0bfe1a13@syzkaller.appspotmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Colin reports that there's unreachable code, since we only ever break
if ret == 0. This is correct, and is due to a reversed logic condition
in when to break or not.
Break out of the loop if we don't process any task work, in that case
we do want to return -EINTR.
Fixes: af9c1a44f8 ("io_uring: process task work in io_uring_register()")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Identical to how we handle the ctx reference counts, increase by the
batch we're expecting to submit, and handle any slow path residual,
if any. The request alloc-and-issue path is very hot, and this makes
a noticeable difference by avoiding an two atomic incs for each
individual request.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
Use in compat_syscall to import either native or the compat iovecs, and
remove the now superflous compat_import_iovec.
This removes the need for special compat logic in most callers, and
the remaining ones can still be simplified by using __import_iovec
with a bool compat parameter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All request preparations are done only during submission, reflect it in
the code by moving io_req_prep() much earlier into io_queue_sqe().
That's much cleaner, because it doen't expose bits to async code which
it won't ever use. Also it makes the interface harder to misuse, and
there are potential places for bugs.
For instance, __io_queue() doesn't clear @sqe before proceeding to a
next linked request, that could have been disastrous, but hopefully
there are linked requests IFF sqe==NULL, so not actually a bug.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_issue_sqe() does two things at once, trying to prepare request and
issuing them. Split it in two and deduplicate with io_defer_prep().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All io_*_prep() functions including io_{read,write}_prep() are called
only during submission where @force_nonblock is always true. Don't keep
propagating it and instead remove the @force_nonblock argument
from prep() altogether.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move setting IOCB_NOWAIT from io_prep_rw() into io_read()/io_write(), so
it's set/cleared in a single place. Also remove @force_nonblock
parameter from io_prep_rw().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_F_NEED_CLEANUP is set only by io_*_prep() and they're guaranteed to
be called only once, so there is no one who may have set the flag
before. Kill REQ_F_NEED_CLEANUP check in these *prep() handlers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Put brackets around bitwise ops in a complex expression
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract common code from if/else branches. That is cleaner and optimised
even better.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In most cases we'll specify IORING_SETUP_SQPOLL and run multiple
io_uring instances in a host. Since all sqthreads are named
"io_uring-sq", it's hard to distinguish the relations between
application process and its io_uring sqthread.
With this patch, application can get its corresponding sqthread pid
and cpu through show_fdinfo.
Steps:
1. Get io_uring fd first.
$ ls -l /proc/<pid>/fd | grep -w io_uring
2. Then get io_uring instance related info, including corresponding
sqthread pid and cpu.
$ cat /proc/<pid>/fdinfo/<io_uring_fd>
pos: 0
flags: 02000002
mnt_id: 13
SqThread: 6929
SqThreadCpu: 2
UserFiles: 1
0: testfile
UserBufs: 0
PollList:
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
[axboe: fixed for new shared SQPOLL]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We do this for CQ ring wait, in case task_work completions come in. We
should do the same in io_uring_register(), to avoid spurious -EINTR
if the ring quiescing ends up having to process task_work to complete
the operation
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a few operations that are offloaded to the worker threads. In
this case, we lose process context and end up in kthread context. This
results in ios to be not accounted to the issuing cgroup and
consequently end up as issued by root. Just like others, adopt the
personality of the blkcg too when issuing via the workqueues.
For the SQPOLL thread, it will live and attach in the inited cgroup's
context.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring does account any registered buffer as pinned/locked memory, and
checks limit and fails if the given user doesn't have a big enough limit
to register the ranges specified. However, if huge pages are used, we
are potentially under-accounting the memory in terms of what gets pinned
on the vm side.
This patch rectifies that, by ensuring that we account the full size of
a compound page, regardless of how much of it is being registered. Huge
pages are not accounted mulitple times - if multiple sections of a huge
page is registered, then the page is only accounted once.
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the spirit of fairness, cap the max number of SQ entries we'll submit
for SQPOLL if we have multiple rings. If we don't do that, we could be
submitting tons of entries for one ring, while others are waiting to get
service.
The value of 8 is somewhat arbitrarily chosen as something that allows
a fair bit of batching, without using an excessive time per ring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's really no point in having this union, it just means that we're
always allocating enough room to cater to any command. But that's
pointless, as the ->io field is request type private anyway.
This gets rid of the io_async_ctx structure, and fills in the required
size in the io_op_defs[] instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Testing ctx->user_bufs for NULL in io_import_fixed() is not neccessary,
because in that case ctx->nr_user_bufs would be zero, and the following
check would fail.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When io_req_map_rw() is called from io_rw_prep_async(), it memcpy()
iorw->iter into itself. Even though it doesn't lead to an error, such a
memcpy()'s aliasing rules violation is considered to be a bad practise.
Inline io_req_map_rw() into io_rw_prep_async(). We don't really need any
remapping there, so it's much simpler than the generic implementation.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set rw->free_iovec to @iovec, that gives an identical result and stresses
that @iovec param rw->free_iovec play the same role.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't touch iter->iov and iov in between __io_import_iovec() and
io_req_map_rw(), the former function aleady sets it correctly, because it
creates one more case with NULL'ed iov to consider in io_req_map_rw().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When using SQPOLL, applications can run into the issue of running out of
SQ ring entries because the thread hasn't consumed them yet. The only
option for dealing with that is checking later, or busy checking for the
condition.
Provide IORING_ENTER_SQ_WAIT if applications want to wait on this
condition.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We support using IORING_SETUP_ATTACH_WQ to share async backends between
rings created by the same process, this now also allows the same to
happen with SQPOLL. The setup procedure remains the same, the caller
sets io_uring_params->wq_fd to the 'parent' context, and then the newly
created ring will attach to that async backend.
This means that multiple rings can share the same SQPOLL thread, saving
resources.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the SQPOLL thread from the ctx, and use the io_sq_data as the
data structure we pass in. io_sq_data has a list of ctx's that we can
then iterate over and handle.
As of now we're ready to handle multiple ctx's, though we're still just
handling a single one after this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move all the necessary state out of io_ring_ctx, and into a new
structure, io_sq_data. The latter now deals with any state or
variables associated with the SQPOLL thread itself.
In preparation for supporting more than one io_ring_ctx per SQPOLL
thread.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is done in preparation for handling more than one ctx, but it also
cleans up the code a bit since io_sq_thread() was a bit too unwieldy to
get a get overview on.
__io_sq_thread() is now the main handler, and it returns an enum sq_ret
that tells io_sq_thread() what it ended up doing. The parent then makes
a decision on idle, spinning, or work handling based on that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to decouple the clearing on wakeup from the the inline schedule,
as that is going to be required for handling multiple rings in one
thread.
Wrap our wakeup handler so we can clear it when we get the wakeup, by
definition that is when we no longer need the flag set.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is in preparation to sharing the poller thread between rings. For
that we need per-ring wait_queue_entry storage, and we can't easily put
that on the stack if one thread is managing multiple rings.
We'll also be sharing the wait_queue_head across rings for the purposes
of wakeups, provide the usual private ring wait_queue_head for now but
make it a pointer so we can easily override it when sharing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're not handling signals by default in kernel threads, and we never
use TWA_SIGNAL for the SQPOLL thread internally. Hence we can never
have a signal pending, and we don't need to check for it (nor flush it).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds a new IORING_SETUP_R_DISABLED flag to start the
rings disabled, allowing the user to register restrictions,
buffers, files, before to start processing SQEs.
When IORING_SETUP_R_DISABLED is set, SQE are not processed and
SQPOLL kthread is not started.
The restrictions registration are allowed only when the rings
are disable to prevent concurrency issue while processing SQEs.
The rings can be enabled using IORING_REGISTER_ENABLE_RINGS
opcode with io_uring_register(2).
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The new io_uring_register(2) IOURING_REGISTER_RESTRICTIONS opcode
permanently installs a feature allowlist on an io_ring_ctx.
The io_ring_ctx can then be passed to untrusted code with the
knowledge that only operations present in the allowlist can be
executed.
The allowlist approach ensures that new features added to io_uring
do not accidentally become available when an existing application
is launched on a newer kernel version.
Currently is it possible to restrict sqe opcodes, sqe flags, and
register opcodes.
IOURING_REGISTER_RESTRICTIONS can only be made once. Afterwards
it is not possible to change restrictions anymore.
This prevents untrusted code from removing restrictions.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we don't get and assign the namespace for the async work, then certain
paths just don't work properly (like /dev/stdin, /proc/mounts, etc).
Anything that references the current namespace of the given task should
be assigned for async work on behalf of that task.
Cc: stable@vger.kernel.org # v5.5+
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Grab actual references to the files_struct. To avoid circular references
issues due to this, we add a per-task note that keeps track of what
io_uring contexts a task has used. When the tasks execs or exits its
assigned files, we cancel requests based on this tracking.
With that, we can grab proper references to the files table, and no
longer need to rely on stashing away ring_fd and ring_file to check
if the ring_fd may have been closed.
Cc: stable@vger.kernel.org # v5.5+
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows us to selectively flush out pending overflows, depending on
the task and/or files_struct being passed in.
No intended functional changes in this patch.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return whether we found and canceled requests or not. This is in
preparation for using this information, no functional changes in this
patch.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sometimes we assign a weak reference to it, sometimes we grab a
reference to it. Clean this up and make it unconditional, and drop the
flag related to tracking this state.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can grab a reference to the task instead of stashing away the task
files_struct. This is doable without creating a circular reference
between the ring fd and the task itself.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes in this patch, prep patch for grabbing references
to the files_struct.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently cancel these when the ring exits, and we cancel all of
them. This is in preparation for killing only the ones associated
with a given task.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The async buffered reads feature is not working when readahead is
turned off. There are two things to concern:
- when doing retry in io_read, not only the IOCB_WAITQ flag but also
the IOCB_NOWAIT flag is still set, which makes it goes to would_block
phase in generic_file_buffered_read() and then return -EAGAIN. After
that, the io-wq thread work is queued, and later doing the async
reads in the old way.
- even if we remove IOCB_NOWAIT when doing retry, the feature is still
not running properly, since in generic_file_buffered_read() it goes to
lock_page_killable() after calling mapping->a_ops->readpage() to do
IO, and thus causing process to sleep.
Fixes: 1a0a7853b9 ("mm: support async buffered reads in generic_file_buffered_read()")
Fixes: 3b2a4439e0 ("io_uring: get rid of kiocb_wait_page_queue_init()")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=mBw7
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two fixes for regressions in this cycle, and one that goes to 5.8
stable:
- fix leak of getname() retrieved filename
- remove plug->nowait assignment, fixing a regression with btrfs
- fix for async buffered retry"
* tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
io_uring: ensure async buffered read-retry is setup properly
io_uring: don't unconditionally set plug->nowait = true
io_uring: ensure open/openat2 name is cleaned on cancelation
A previous commit for fixing up short reads botched the async retry
path, so we ended up going to worker threads more often than we should.
Fix this up, so retries work the way they originally were intended to.
Fixes: 227c0c9673 ("io_uring: internally retry short reads")
Reported-by: Hao_Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This causes all the bios to be submitted with REQ_NOWAIT, which can be
problematic on either btrfs or on file systems that otherwise use a mix
of block devices where only some of them support it.
For now, just remove the setting of plug->nowait = true.
Reported-by: Dan Melnic <dmm@fb.com>
Reported-by: Brian Foster <bfoster@redhat.com>
Fixes: b63534c41e ("io_uring: re-issue block requests that failed because of resources")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we cancel these requests, we'll leak the memory associated with the
filename. Add them to the table of ops that need cleaning, if
REQ_F_NEED_CLEANUP is set.
Cc: stable@vger.kernel.org
Fixes: e62753e4e2 ("io_uring: call statx directly")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=ImBG
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes - most of them regression fixes from this cycle, but also
a few stable heading fixes, and a build fix for the included demo tool
since some systems now actually have gettid() available"
* tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block:
io_uring: fix openat/openat2 unified prep handling
io_uring: mark statx/files_update/epoll_ctl as non-SQPOLL
tools/io_uring: fix compile breakage
io_uring: don't use retry based buffered reads for non-async bdev
io_uring: don't re-setup vecs/iter in io_resumit_prep() is already there
io_uring: don't run task work on an exiting task
io_uring: drop 'ctx' ref on task work cancelation
io_uring: grab any needed state during defer prep
A previous commit unified how we handle prep for these two functions,
but this means that we check the allowed context (SQPOLL, specifically)
later than we should. Move the ring type checking into the two parent
functions, instead of doing it after we've done some setup work.
Fixes: ec65fea5a8 ("io_uring: deduplicate io_openat{,2}_prep()")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These will naturally fail when attempted through SQPOLL, but either
with -EFAULT or -EBADF. Make it explicit that these are not workable
through SQPOLL and return -EINVAL, just like other ops that need to
use ->files.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some block devices, like dm, bubble back -EAGAIN through the completion
handler. We check for this in io_read(), but don't honor it for when
we have copied the iov. Return -EAGAIN for this case before retrying,
to force punt to io-wq.
Fixes: bcf5a06304 ("io_uring: support true async buffered reads, if file provides it")
Reported-by: Zorro Lang <zlang@redhat.com>
Tested-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we already have mapped the necessary data for retry, then don't set
it up again. It's a pointless operation, and we leak the iovec if it's
a large (non-stack) vec.
Fixes: b63534c41e ("io_uring: re-issue block requests that failed because of resources")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This isn't safe, and isn't needed either. We are guaranteed that any
work we queue is on a live task (and will be run), or it goes to
our backup io-wq threads if the task is exiting.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If task_work ends up being marked for cancelation, we go through a
cancelation helper instead of the queue path. In converting task_work to
always hold a ctx reference, this path was missed. Make sure that
io_req_task_cancel() puts the reference that is being held against the
ctx.
Fixes: 6d816e088c ("io_uring: hold 'ctx' reference around task_work queue + execute")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Always grab work environment for deferred links. The assumption that we
will be running it always from the task in question is false, as exiting
tasks may mean that we're deferring this one to a thread helper. And at
that point it's too late to grab the work environment.
Fixes: debb85f496 ("io_uring: factor out grab_env() from defer_prep()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=v5QQ
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block
Pull more io_uring fixes from Jens Axboe:
"Two followup fixes. One is fixing a regression from this merge window,
the other is two commits fixing cancelation of deferred requests.
Both have gone through full testing, and both spawned a few new
regression test additions to liburing.
- Don't play games with const, properly store the output iovec and
assign it as needed.
- Deferred request cancelation fix (Pavel)"
* tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block:
io_uring: fix linked deferred ->files cancellation
io_uring: fix cancel of deferred reqs with ->files
io_uring: fix explicit async read/write mapping for large segments
While looking for ->files in ->defer_list, consider that requests there
may actually be links.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While trying to cancel requests with ->files, it also should look for
requests in ->defer_list, otherwise it might end up hanging a thread.
Cancel all requests in ->defer_list up to the last request there with
matching ->files, that's needed to follow drain ordering semantics.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we exceed UIO_FASTIOV, we don't handle the transition correctly
between an allocated vec for requests that are queued with IOSQE_ASYNC.
Store the iovec appropriately and re-set it in the iter iov in case
it changed.
Fixes: ff6165b2d7 ("io_uring: retain iov_iter state over io_read/io_write calls")
Reported-by: Nick Hill <nick@nickhill.org>
Tested-by: Norman Maurer <norman.maurer@googlemail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NLOn
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- EAGAIN with O_NONBLOCK retry fix
- Two small fixes for registered files (Jiufei)
* tag 'io_uring-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
io_uring: no read/write-retry on -EAGAIN error and O_NONBLOCK marked file
io_uring: set table->files[i] to NULL when io_sqe_file_register failed
io_uring: fix removing the wrong file in __io_sqe_files_update()
Actually two things that need fixing up here:
- The io_rw_reissue() -EAGAIN retry is explicit to block devices and
regular files, so don't ever attempt to do that on other types of
files.
- If we hit -EAGAIN on a nonblock marked file, don't arm poll handler for
it. It should just complete with -EAGAIN.
Cc: stable@vger.kernel.org
Reported-by: Norman Maurer <norman.maurer@googlemail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While io_sqe_file_register() failed in __io_sqe_files_update(),
table->files[i] still point to the original file which may freed
soon, and that will trigger use-after-free problems.
Cc: stable@vger.kernel.org
Fixes: f3bd9dae37 ("io_uring: fix memleak in __io_sqe_files_update()")
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Index here is already the position of the file in fixed_file_table, we
should not use io_file_from_index() again to get it. Otherwise, the
wrong file which still in use may be released unexpectedly.
Cc: stable@vger.kernel.org # v5.6
Fixes: 05f3fb3c53 ("io_uring: avoid ring quiesce for fixed file set unregister and update")
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=nSwl
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-08-28' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes in here, all based on reports and test cases from folks
using it. Most of it is stable material as well:
- Hashed work cancelation fix (Pavel)
- poll wakeup signalfd fix
- memlock accounting fix
- nonblocking poll retry fix
- ensure we never return -ERESTARTSYS for reads
- ensure offset == -1 is consistent with preadv2() as documented
- IOPOLL -EAGAIN handling fixes
- remove useless task_work bounce for block based -EAGAIN retry"
* tag 'io_uring-5.9-2020-08-28' of git://git.kernel.dk/linux-block:
io_uring: don't bounce block based -EAGAIN retry off task_work
io_uring: fix IOPOLL -EAGAIN retries
io_uring: clear req->result on IOPOLL re-issue
io_uring: make offset == -1 consistent with preadv2/pwritev2
io_uring: ensure read requests go through -ERESTART* transformation
io_uring: don't use poll handler if file can't be nonblocking read/written
io_uring: fix imbalanced sqo_mm accounting
io_uring: revert consumed iov_iter bytes on error
io-wq: fix hang after cancelling pending hashed work
io_uring: don't recurse on tsk->sighand->siglock with signalfd
These events happen inline from submission, so there's no need to
bounce them through the original task. Just set them up for retry
and issue retry directly instead of going over task_work.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This normally isn't hit, as polling is mostly done on NVMe with deep
queue depths. But if we do run into request starvation, we need to
ensure that retries are properly serialized.
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure we clear req->result, which was set to -EAGAIN for retry
purposes, when moving it to the reissue list. Otherwise we can end up
retrying a request more than once, which leads to weird results in
the io-wq handling (and other spots).
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The man page for io_uring generally claims were consistent with what
preadv2 and pwritev2 accept, but turns out there's a slight discrepancy
in how offset == -1 is handled for pipes/streams. preadv doesn't allow
it, but preadv2 does. This currently causes io_uring to return -EINVAL
if that is attempted, but we should allow that as documented.
This change makes us consistent with preadv2/pwritev2 for just passing
in a NULL ppos for streams if the offset is -1.
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Benedikt Ames <wisp3rwind@posteo.eu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to call kiocb_done() for any ret < 0 to ensure that we always
get the proper -ERESTARTSYS (and friends) transformation done.
At some point this should be tied into general error handling, so we
can get rid of the various (mostly network) related commands that check
and perform this substitution.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's no point in using the poll handler if we can't do a nonblocking
IO attempt of the operation, since we'll need to go async anyway. In
fact this is actively harmful, as reading from eg pipes won't return 0
to indicate EOF.
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Benedikt Ames <wisp3rwind@posteo.eu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We do the initial accounting of locked_vm and pinned_vm before we have
setup ctx->sqo_mm, which means we can end up having not accounted the
memory at setup time, but still decrement it when we exit. This causes
an imbalance in the accounting.
Setup ctx->sqo_mm earlier in io_uring_create(), before we do the first
accounting of mm->{locked,pinned}_vm. This also unifies the state
grabbing for the ctx, and eliminates a failure case in
io_sq_offload_start().
Fixes: f74441e631 ("io_uring: account locked memory before potential error case")
Reported-by: Robert M. Muncrief <rmuncrief@humanavance.com>
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Robert M. Muncrief <rmuncrief@humanavance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some consumers of the iov_iter will return an error, but still have
bytes consumed in the iterator. This is an issue for -EAGAIN, since we
rely on a sane iov_iter state across retries.
Fix this by ensuring that we revert consumed bytes, if any, if the file
operations have consumed any bytes from iterator. This is similar to what
generic_file_read_iter() does, and is always safe as we have the previous
bytes count handy already.
Fixes: ff6165b2d7 ("io_uring: retain iov_iter state over io_read/io_write calls")
Reported-by: Dmitry Shulyak <yashulyak@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, io_uring's recvmsg subscribes to both POLLERR and POLLIN. In
the context of TCP tx zero-copy, this is inefficient since we are only
reading the error queue and not using recvmsg to read POLLIN responses.
This patch was tested by using a simple sending program to call recvmsg
using io_uring with MSG_ERRQUEUE set and verifying with printks that the
POLLIN is correctly unset when the msg flags are MSG_ERRQUEUE.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Luke Hsiao <lukehsiao@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an application is doing reads on signalfd, and we arm the poll handler
because there's no data available, then the wakeup can recurse on the
tasks sighand->siglock as the signal delivery from task_work_add() will
use TWA_SIGNAL and that attempts to lock it again.
We can detect the signalfd case pretty easily by comparing the poll->head
wait_queue_head_t with the target task signalfd wait queue. Just use
normal task wakeup for this case.
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If io_import_iovec() returns an error, return iovec is undefined and
must not be used, so don't set it to NULL when failing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kfree() handles NULL pointers well, but io_{read,write}() checks it
because of performance reasons. Leave a comment there for those who are
tempted to patch it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Setting and clearing REQ_F_OVERFLOW in io_uring_cancel_files() and
io_cqring_overflow_flush() are racy, because they might be called
asynchronously.
REQ_F_OVERFLOW flag in only needed for files cancellation, so if it can
be guaranteed that requests _currently_ marked inflight can't be
overflown, the problem will be solved with removing the flag
altogether.
That's how the patch works, it removes inflight status of a request
in io_cqring_fill_event() whenever it should be thrown into CQ-overflow
list. That's Ok to do, because no opcode specific handling can be done
after io_cqring_fill_event(), the same assumption as with "struct
io_completion" patches.
And it already have a good place for such cleanups, which is
io_clean_op(). A nice side effect of this is removing this inflight
check from the hot path.
note on synchronisation: now __io_cqring_fill_event() may be taking two
spinlocks simultaneously, completion_lock and inflight_lock. It's fine,
because we never do that in reverse order, and CQ-overflow of inflight
requests shouldn't happen often.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently use system_wq, which is unbounded in terms of number of
workers. This means that if we're exiting tons of rings at the same
time, then we'll briefly spawn tons of event kworkers just for a very
short blocking time as the rings exit.
Use system_unbound_wq instead, which has a sane cap on the concurrency
level.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_rw_prep_async() goes through a dance of clearing req->io, calling
the iovec import, then re-setting req->io. Provide an internal helper
that does the right thing without needing state tweaked to get there.
This enables further cleanups in io_read, io_write, and
io_resubmit_prep(), but that's left for another time.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 5.9 merge moved this function io_uring, which means that we don't
need to retain the generic nature of it. Clean up this part by removing
redundant checks, and just inlining the small remainder in
io_rw_should_retry().
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit f254ac04c8 ("io_uring: enable lookup of links holding inflight files")
only handled 2 out of the three head link cases we have, we also need to
lookup and cancel work that is blocked in io-wq if that work has a link
that's holding a reference to the files structure.
Put the "cancel head links that hold this request pending" logic into
io_attempt_cancel(), which will to through the motions of finding and
canceling head links that hold the current inflight files stable request
pending.
Cc: stable@vger.kernel.org
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One case was missed in the short IO retry handling, and that's hitting
-EAGAIN on a blocking attempt read (eg from io-wq context). This is a
problem on sockets that are marked as non-blocking when created, they
don't carry any REQ_F_NOWAIT information to help us terminate them
instead of perpetually retrying.
Fixes: 227c0c9673 ("io_uring: internally retry short reads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a bit of confusion on the matching pairs of poll vs double poll,
depending on if the request is a pure poll (IORING_OP_POLL_ADD) or
poll driven retry.
Add io_poll_get_double() that returns the double poll waitqueue, if any,
and io_poll_get_single() that returns the original poll waitqueue. With
that, remove the argument to io_poll_remove_double().
Finally ensure that wait->private is cleared once the double poll handler
has run, so that remove knows it's already been seen.
Cc: stable@vger.kernel.org # v5.8
Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com
Fixes: 18bceab101 ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've had a few application cases of not handling short reads properly,
and it is understandable as short reads aren't really expected if the
application isn't doing non-blocking IO.
Now that we retain the iov_iter over retries, we can implement internal
retry pretty trivially. This ensures that we don't return a short read,
even for buffered reads on page cache conflicts.
Cleanup the deep nesting and hard to read nature of io_read() as well,
it's much more straight forward now to read and understand. Added a
few comments explaining the logic as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of maintaining (and setting/remembering) iov_iter size and
segment counts, just put the iov_iter in the async part of the IO
structure.
This is mostly a preparation patch for doing appropriate internal retries
for short reads, but it also cleans up the state handling nicely and
simplifies it quite a bit.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a process exits, we cancel whatever requests it has pending that
are referencing the file table. However, if a link is holding a
reference, then we cannot find it by simply looking at the inflight
list.
Enable checking of the poll and timeout list to find the link, and
cancel it appropriately.
Cc: stable@vger.kernel.org
Reported-by: Josef <josef.grieb@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check the ipt.error value, it must have been either cleared to zero or
set to another error than the default -EINVAL if we don't go through the
waitqueue proc addition. Just give up on poll at that point and return
failure, this will fallback to async work.
io_poll_add() doesn't suffer from this failure case, as it returns the
error value directly.
Cc: stable@vger.kernel.org # v5.7+
Reported-by: syzbot+a730016dc0bdce4f6ff5@syzkaller.appspotmail.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're holding the request reference, but we need to go one higher
to ensure that the ctx remains valid after the request has finished.
If the ring is closed with pending task_work inflight, and the
given io_kiocb finishes sync during issue, then we need a reference
to the ring itself around the task_work execution cycle.
Cc: stable@vger.kernel.org # v5.7+
Reported-by: syzbot+9b260fc33297966f5a8e@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're in the error path failing links and we have a link that has
grabbed a reference to the fs_struct, then we cannot safely drop our
reference to the table if we already hold the completion lock. This
adds a hardirq dependency to the fs_struct->lock, which it currently
doesn't have.
Defer the final cleanup and free of such requests to avoid adding this
dependency.
Reported-by: syzbot+ef4b654b49ed7ff049bf@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we traverse into failing links or timeouts, we need to ensure we
propagate the REQ_F_COMP_LOCKED flag to ensure that we correctly signal
to the completion side that we already hold the completion lock.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syszbot reports a scenario where we recurse on the completion lock
when flushing an overflow:
1 lock held by syz-executor287/6816:
#0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333
stack backtrace:
CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1f0/0x31e lib/dump_stack.c:118
print_deadlock_bug kernel/locking/lockdep.c:2391 [inline]
check_deadlock kernel/locking/lockdep.c:2432 [inline]
validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202
__lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426
lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005
__raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
_raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167
spin_lock_irq include/linux/spinlock.h:379 [inline]
io_queue_linked_timeout fs/io_uring.c:5928 [inline]
__io_queue_async_work fs/io_uring.c:1192 [inline]
__io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237
io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359
io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808
io_uring_release+0x59/0x70 fs/io_uring.c:7829
__fput+0x34f/0x7b0 fs/file_table.c:281
task_work_run+0x137/0x1c0 kernel/task_work.c:135
exit_task_work include/linux/task_work.h:25 [inline]
do_exit+0x5f3/0x1f20 kernel/exit.c:806
do_group_exit+0x161/0x2d0 kernel/exit.c:903
__do_sys_exit_group+0x13/0x20 kernel/exit.c:914
__se_sys_exit_group+0x10/0x10 kernel/exit.c:912
__x64_sys_exit_group+0x37/0x40 kernel/exit.c:912
do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by passing back the link from __io_queue_async_work(), and
then let the caller handle the queueing of the link. Take care to also
punt the submission reference put to the caller, as we're holding the
completion lock for the __io_queue_defer() case. Hence we need to mark
the io_kiocb appropriately for that case.
Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An earlier commit:
b7db41c9e0 ("io_uring: fix regression with always ignoring signals in io_cqring_wait()")
ensured that we didn't get stuck waiting for eventfd reads when it's
registered with the io_uring ring for event notification, but we still
have cases where the task can be waiting on other events in the kernel and
need a bigger nudge to make forward progress. Or the task could be in the
kernel and running, but on its way to blocking.
This means that TWA_RESUME cannot reliably be used to ensure we make
progress. Use TWA_SIGNAL unconditionally.
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Josef <josef.grieb@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The tear down path will always unaccount the memory, so ensure that we
have accounted it before hitting any of them.
Reported-by: Tomáš Chaloupka <chalucha@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we hit an earlier error path in io_uring_create(), then we will have
accounted memory, but not set ctx->{sq,cq}_entries yet. Then when the
ring is torn down in error, we use those values to unaccount the memory.
Ensure we set the ctx entries before we're able to hit a potential error
path.
Cc: stable@vger.kernel.org
Reported-by: Tomáš Chaloupka <chalucha@gmail.com>
Tested-by: Tomáš Chaloupka <chalucha@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The retry based logic here isn't easy to follow unless you're already
familiar with how io_uring does task_work based retries. Add some
comments explaining the flow a little better.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since we don't do exclusive waits or wakeups, we know that the bit is
always going to be set. Kill the test. Also see commit:
2a9127fcf2 ("mm: rewrite wait_on_page_bit_common() logic")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=2vmy
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Lots of cleanups in here, hardening the code and/or making it easier
to read and fixing bugs, but a core feature/change too adding support
for real async buffered reads. With the latter in place, we just need
buffered write async support and we're done relying on kthreads for
the fast path. In detail:
- Cleanup how memory accounting is done on ring setup/free (Bijan)
- sq array offset calculation fixup (Dmitry)
- Consistently handle blocking off O_DIRECT submission path (me)
- Support proper async buffered reads, instead of relying on kthread
offload for that. This uses the page waitqueue to drive retries
from task_work, like we handle poll based retry. (me)
- IO completion optimizations (me)
- Fix race with accounting and ring fd install (me)
- Support EPOLLEXCLUSIVE (Jiufei)
- Get rid of the io_kiocb unionizing, made possible by shrinking
other bits (Pavel)
- Completion side cleanups (Pavel)
- Cleanup REQ_F_ flags handling, and kill off many of them (Pavel)
- Request environment grabbing cleanups (Pavel)
- File and socket read/write cleanups (Pavel)
- Improve kiocb_set_rw_flags() (Pavel)
- Tons of fixes and cleanups (Pavel)
- IORING_SQ_NEED_WAKEUP clear fix (Xiaoguang)"
* tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block: (127 commits)
io_uring: flip if handling after io_setup_async_rw
fs: optimise kiocb_set_rw_flags()
io_uring: don't touch 'ctx' after installing file descriptor
io_uring: get rid of atomic FAA for cq_timeouts
io_uring: consolidate *_check_overflow accounting
io_uring: fix stalled deferred requests
io_uring: fix racy overflow count reporting
io_uring: deduplicate __io_complete_rw()
io_uring: de-unionise io_kiocb
io-wq: update hash bits
io_uring: fix missing io_queue_linked_timeout()
io_uring: mark ->work uninitialised after cleanup
io_uring: deduplicate io_grab_files() calls
io_uring: don't do opcode prep twice
io_uring: clear IORING_SQ_NEED_WAKEUP after executing task works
io_uring: batch put_task_struct()
tasks: add put_task_struct_many()
io_uring: return locked and pinned page accounting
io_uring: don't miscount pinned memory
io_uring: don't open-code recv kbuf managment
...
As recently done with with send/recv, flip the if after
rw_verify_aread() in io_{read,write}() and tabulise left bits left.
This removes mispredicted by a compiler jump on the success/fast path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As soon as we install the file descriptor, we have to assume that it
can get arbitrarily closed. We currently account memory (and note that
we did) after installing the ring fd, which means that it could be a
potential use-after-free condition if the fd is closed right after
being installed, but before we fiddle with the ctx.
In fact, syzbot reported this exact scenario:
BUG: KASAN: use-after-free in io_account_mem fs/io_uring.c:7397 [inline]
BUG: KASAN: use-after-free in io_uring_create fs/io_uring.c:8369 [inline]
BUG: KASAN: use-after-free in io_uring_setup+0x2797/0x2910 fs/io_uring.c:8400
Read of size 1 at addr ffff888087a41044 by task syz-executor.5/18145
CPU: 0 PID: 18145 Comm: syz-executor.5 Not tainted 5.8.0-rc7-next-20200729-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x18f/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
io_account_mem fs/io_uring.c:7397 [inline]
io_uring_create fs/io_uring.c:8369 [inline]
io_uring_setup+0x2797/0x2910 fs/io_uring.c:8400
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45c429
Code: 8d b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f8f121d0c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9
RAX: ffffffffffffffda RBX: 0000000000008540 RCX: 000000000045c429
RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000196
RBP: 000000000078bf38 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000078bf0c
R13: 00007fff86698cff R14: 00007f8f121d19c0 R15: 000000000078bf0c
Move the accounting of the ring used locked memory before we get and
install the ring file descriptor.
Cc: stable@vger.kernel.org
Reported-by: syzbot+9d46305e76057f30c74e@syzkaller.appspotmail.com
Fixes: 309758254e ("io_uring: report pinned memory usage")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If ->cq_timeouts modifications are done under ->completion_lock, we
don't really nee any fetch-and-add and other complex atomics. Replace it
with non-atomic FAA, that saves an implicit full memory barrier.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to mark ctx->{cq,sq}_check_overflow to get rid of
duplicates, and it's clearer to check cq_overflow_list directly anyway.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Always do io_commit_cqring() after completing a request, even if it was
accounted as overflowed on the CQ side. Failing to do that may lead to
not to pushing deferred requests when needed, and so stalling the whole
ring.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All ->cq_overflow modifications should be under completion_lock,
otherwise it can report a wrong number to the userspace. Fix it in
io_uring_cancel_files().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call __io_complete_rw() in io_iopoll_queue() instead of hand coding it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As io_kiocb have enough space, move ->work out of a union. It's safer
this way and removes ->work memcpy bouncing.
By the way make tabulation in struct io_kiocb consistent.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Whoever called io_prep_linked_timeout() should also do
io_queue_linked_timeout(). __io_queue_sqe() doesn't follow that for the
punting path leaving linked timeouts prepared but never queued.
Fixes: 6df1db6b54 ("io_uring: fix mis-refcounting linked timeouts")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove REQ_F_WORK_INITIALIZED after io_req_clean_work(). That's a cold
path but is safer for those using io_req_clean_work() out of
*dismantle_req()/*io_free(). And for the same reason zero work.fs
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move io_req_init_async() into io_grab_files(), it's safer this way. Note
that io_queue_async_work() does *init_async(), so it's valid to move out
of __io_queue_sqe() punt path. Also, add a helper around io_grab_files().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling into opcode prep handlers may be dangerous, as they re-read
SQE but might not re-initialise requests completely. If io_req_defer()
passed fast checks and is done with preparations, punt it async.
As all other cases are covered with nulling @sqe, this guarantees that
io_[opcode]_prep() are visited only once per request.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In io_sq_thread(), if there are task works to handle, current codes
will skip schedule() and go on polling sq again, but forget to clear
IORING_SQ_NEED_WAKEUP flag, fix this issue. Also add two helpers to
set and clear IORING_SQ_NEED_WAKEUP flag,
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As every iopoll request have a task ref, it becomes expensive to put
them one by one, instead we can put several at once integrating that
into io_req_free_batch().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Locked and pinned memory accounting in io_{,un}account_mem() depends on
having ->sqo_mm, which is NULL after a recent change for non SQPOLL'ed
io_ring. That disables the accounting.
Return ->sqo_mm initialisation back, and do __io_sq_thread_acquire_mm()
based on IORING_SETUP_SQPOLL flag.
Fixes: 8eb06d7e8d ("io_uring: fix missing ->mm on exit")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sqe_buffer_unregister() uses cxt->sqo_mm for memory accounting, but
io_ring_ctx_free() drops ->sqo_mm before leaving pinned_vm
over-accounted. Postpone mm cleanup for when it's not needed anymore.
Fixes: 309758254e ("io_uring: report pinned memory usage")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't implement fast path of kbuf freeing and management inlined into
io_recv{,msg}(), that's error prone and duplicates handling. Replace it
with a helper io_put_recv_kbuf(), which mimics io_put_rw_kbuf() in the
io_read/write().
This also keeps cflags calculation in one place, removing duplication
between rw and recv/send.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract a common helper for cleaning up a selected buffer, this will be
used shortly. By the way, correct cflags types to unsigned and, as kbufs
are anyway tracked by a flag, remove useless zeroing req->rw.addr.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move REQ_F_BUFFER_SELECT flag check out of io_recv_buffer_select(), and
do that in its call sites That saves us from double error checking and
possibly an extra function call.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_clean_op() may be skipped even if there is a selected io_buffer,
that's because *select_buffer() funcions never set REQ_F_NEED_CLEANUP.
Trigger io_clean_op() when REQ_F_BUFFER_SELECTED is set as well, and
and clear the flag if was freed out of it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of returning error from io_recv(), go through generic cleanup
path, because it'll retain cflags for userspace. Do the same for
io_send() for consistency.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the return on a bad socket, kmsg is always non-null by the end
of the function, prune left extra checks and initialisations.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Flip over "if (sock)" condition with return on error, the upper layer
will take care. That change will be handy later, but already removes
an extra jump from hot path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, file refs in struct io_submit_state are tracked with 2 vars:
@has_refs -- how many refs were initially taken
@used_refs -- number of refs used
Replace it with a single variable counting how many refs left at the
current moment.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
RLIMIT_SIZE in needed only for execution from an io-wq context, hence
move all preparations from hot path to io-wq work setup.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every call to io_req_defer_prep() is prepended with allocating ->io,
just do that in the function. And while we're at it, mark error paths
with unlikey and replace "if (ret < 0)" with "if (ret)".
There is only one change in the observable behaviour, that's instead of
killing the head request right away on error, it postpones it until the
link is assembled, that looks more preferable.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A switch in __io_clean_op() doesn't have default, it's pointless to list
opcodes that doesn't do any cleanup. Remove IORING_OP_OPEN* from there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only caller of io_req_work_grab_env() is io_prep_async_work(), and
they are both initialising req->work. Inline grab_env(), it's easier
to keep this way, moreover there already were bugs with misplacing
io_req_init_async().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->cflags is used only for defer-completion path, just use completion
data to store it. With the 4 bytes from the ->sequence patch and
compacting io_kiocb, this frees 8 bytes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->sequence is used only for deferred (i.e. DRAIN) requests, but
initialised for every request. Remove req->sequence from io_kiocb
together with its initialisation in io_init_req().
Replace it with a new field in struct io_defer_entry, that will be
calculated only when needed in io_req_defer(), which is a slow path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only left user of req->list is DRAIN, hence instead of keeping a
separate per request list for it, do that with old fashion non-intrusive
lists allocated on demand. That's a really slow path, so that's OK.
This removes req->list and so sheds 16 bytes from io_kiocb.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of using shared req->list, hang timeouts up on their own list
entry. struct io_timeout have enough extra space for it, but if that
will be a problem ->inflight_entry can reused for that.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As with the completion path, also use compl.list for overflowed
requests. If cleaned up properly, nobody needs per-op data there
anymore.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->inflight_entry is used to track requests that grabbed files_struct.
Let's share it with iopoll list, because the only iopoll'ed ops are
reads and writes, which don't need a file table.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It supports both polling and I/O polling. Rename ctx->poll to clearly
show that it's only in I/O poll case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling io_req_complete(req) means that the request is done, and there
is nothing left but to clean it up. That also means that per-op data
after that should not be used, so we're free to reuse it in completion
path, e.g. to store overflow_list as done in this patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As for import_iovec(), return !=NULL iovec from io_import_iovec() only
when it should be freed. That includes returning NULL when iovec is
already in req->io, because it should be deallocated by other means,
e.g. inside op handler. After io_setup_async_rw() local iovec to ->io,
just mark it NULL, to follow the idea in io_{read,write} as well.
That's easier to follow, and especially useful if we want to reuse
per-op space for completion data.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: only call kfree() on non-NULL pointer]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Preparing reads/writes for async is a bit tricky. Extract a helper to
not repeat it twice.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't deref req->io->rw every time, but put it in a local variable. This
looks prettier, generates less instructions, and doesn't break alias
analysis.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_kiocb::task_work was de-unionised, and is not planned to be shared
back, because it's too useful and commonly used. Hence, instead of
keeping a separate task_work in struct io_async_rw just reuse
req->task_work.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
send/recv msghdr initialisation works with struct io_async_msghdr, but
pulls the whole struct io_async_ctx for no reason. That complicates it
with composite accessing, e.g. io->msg.
Use and pass the most specific type, which is struct io_async_msghdr.
It is the larget field in union io_async_ctx and doesn't save stack
space, but looks clearer.
The most of the changes are replacing "io->msg." with "iomsg->"
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every second field in send/recv is called msg, make it a bit more
understandable by renaming ->msg, which is a user provided ptr,
to ->umsg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rings_size() sets sq_offset to the total size of the rings (the returned
value which is used for memory allocation). This is wrong: sq array should
be located within the rings, not after them. Set sq_offset to where it
should be.
Fixes: 75b28affdd ("io_uring: allocate the two rings together")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hristo Venev <hristo@venev.name>
Cc: io-uring@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in io_uring-5.8 fixes, as changes/cleanups to how we do locked
mem accounting require a fixup, and only one of the spots are noticed
by git as the other merges cleanly. The flags fix from io_uring-5.8
also causes a merge conflict, the leak fix for recvmsg, the double poll
fix, and the link failure locking fix.
* io_uring-5.8:
io_uring: fix lockup in io_fail_links()
io_uring: fix ->work corruption with poll_add
io_uring: missed req_init_async() for IOSQE_ASYNC
io_uring: always allow drain/link/hardlink/async sqe flags
io_uring: ensure double poll additions work with both request types
io_uring: fix recvmsg memory leak with buffer selection
io_uring: fix not initialised work->flags
io_uring: fix missing msg_name assignment
io_uring: account user memory freed when exit has been queued
io_uring: fix memleak in io_sqe_files_register()
io_uring: fix memleak in __io_sqe_files_update()
io_uring: export cq overflow status to userspace
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->work might be already initialised by the time it gets into
__io_arm_poll_handler(), which will corrupt it by using fields that are
in an union with req->work. Luckily, the only side effect is missing
put_creds(). Clean req->work before going there.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IOSQE_ASYNC branch of io_queue_sqe() is another place where an
unitialised req->work can be accessed (i.e. prior io_req_init_async()).
Nothing really bad though, it just looses IO_WQ_WORK_CONCURRENT flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently filter these for timeout_remove/async_cancel/files_update,
but we only should be filtering for fixed file and buffer select. This
also causes a second read of sqe->flags, which isn't needed.
Just check req->flags for the relevant bits. This then allows these
commands to be used in links, for example, like everything else.
Signed-off-by: Daniele Albano <d.albano@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The double poll additions were centered around doing POLL_ADD on file
descriptors that use more than one waitqueue (typically one for read,
one for write) when being polled. However, it can also end up being
triggered for when we use poll triggered retry. For that case, we cannot
safely use req->io, as that could be used by the request type itself.
Add a second io_poll_iocb pointer in the structure we allocate for poll
based retry, and ensure we use the right one from the two paths.
Fixes: 18bceab101 ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_recvmsg() doesn't free memory allocated for struct io_buffer. This can
causes a leak when used with automatic buffer selection.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
59960b9deb ("io_uring: fix lazy work init") tried to fix missing
io_req_init_async(), but left out work.flags and hash. Do it earlier.
Fixes: 7cdaf587de ("io_uring: avoid whole io_wq_work copy for requests completed inline")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure to set msg.msg_name for the async portion of send/recvmsg,
as the header copy will copy to/from it.
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently account the memory after the exit work has been run, but
that leaves a gap where a process has closed its ring and until the
memory has been accounted as freed. If the memlocked ulimit is
borderline, then that can introduce spurious setup errors returning
-ENOMEM because the free work hasn't been run yet.
Account this as freed when we close the ring, as not to expose a tiny
gap where setting up a new ring can fail.
Fixes: 85faa7b834 ("io_uring: punt final io_ring_ctx wait-and-free to workqueue")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't use 'ctx' at all in io_sq_thread_drop_mm(), it just works
on the mm of the current task. Drop the argument.
Move io_file_put_work() to where we have the other forward declarations
of functions.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For those applications which are not willing to use io_uring_enter()
to reap and handle cqes, they may completely rely on liburing's
io_uring_peek_cqe(), but if cq ring has overflowed, currently because
io_uring_peek_cqe() is not aware of this overflow, it won't enter
kernel to flush cqes, below test program can reveal this bug:
static void test_cq_overflow(struct io_uring *ring)
{
struct io_uring_cqe *cqe;
struct io_uring_sqe *sqe;
int issued = 0;
int ret = 0;
do {
sqe = io_uring_get_sqe(ring);
if (!sqe) {
fprintf(stderr, "get sqe failed\n");
break;;
}
ret = io_uring_submit(ring);
if (ret <= 0) {
if (ret != -EBUSY)
fprintf(stderr, "sqe submit failed: %d\n", ret);
break;
}
issued++;
} while (ret > 0);
assert(ret == -EBUSY);
printf("issued requests: %d\n", issued);
while (issued) {
ret = io_uring_peek_cqe(ring, &cqe);
if (ret) {
if (ret != -EAGAIN) {
fprintf(stderr, "peek completion failed: %s\n",
strerror(ret));
break;
}
printf("left requets: %d\n", issued);
continue;
}
io_uring_cqe_seen(ring, cqe);
issued--;
printf("left requets: %d\n", issued);
}
}
int main(int argc, char *argv[])
{
int ret;
struct io_uring ring;
ret = io_uring_queue_init(16, &ring, 0);
if (ret) {
fprintf(stderr, "ring setup failed: %d\n", ret);
return 1;
}
test_cq_overflow(&ring);
return 0;
}
To fix this issue, export cq overflow status to userspace by adding new
IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as
io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's safe to call kfree() with a NULL pointer, but it's also pointless.
Most of the time we don't have any data to free, and at millions of
requests per second, the redundant function call adds noticeable
overhead (about 1.3% of the runtime).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The "apoll" variable is freed and then used on the next line. We need
to move the free down a few lines.
Fixes: 0be0b0e33b ("io_uring: simplify io_async_task_func()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First of all don't spin in io_ring_ctx_wait_and_kill() on iopoll.
Requests won't complete faster because of that, but only lengthen
io_uring_release().
The same goes for offloaded cleanup in io_ring_exit_work() -- it
already has waiting loop, don't do blocking active spinning.
For that, pass min=0 into io_iopoll_[try_]reap_events(), so it won't
actively spin. Leave the function if io_do_iopoll() there can't
complete a request to sleep in io_ring_exit_work().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nobody checks io_iopoll_check()'s output parameter @nr_events.
Remove the parameter and declare it further down the stack.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_iopoll_reap_events() doesn't care about returned valued of
io_iopoll_getevents() and does the same checks for list emptiness
and need_resched(). Just use io_do_iopoll().
io_sq_thread() doesn't check return value as well. It also passes min=0,
so there never be the second iteration inside io_poll_getevents().
Inline it there too.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's not nice to hold @uring_lock for too long io_iopoll_reap_events().
For instance, the lock is needed to publish requests to @poll_list, and
that locks out tasks doing that for no good reason. Loose it
occasionally.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nobody adjusts *nr_events (number of completed requests) before calling
io_iopoll_getevents(), so the passed @min shouldn't be adjusted as well.
Othewise it can return less than initially asked @min without hitting
need_resched().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->iopoll() may have completed current request, but instead of reaping
it, io_do_iopoll() just continues with the next request in the list.
As a result it can leave just polled and completed request in the list
up until next syscall. Even outer loop in io_iopoll_getevents() doesn't
help the situation.
E.g. poll_list: req0 -> req1
If req0->iopoll() completed both requests, and @min<=1,
then @req0 will be left behind.
Check whether a req was completed after ->iopoll().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't forget to fill cqe->flags properly in io_submit_flush_completions()
Fixes: a1d7c393c4 ("io_uring: enable READ/WRITE to use deferred completions")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A preparation path, extracts error path into a separate block. It looks
saner then calling req_set_fail_links() after io_put_req_find_next(), even
though it have been working well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_prep_linked_timeout() sets REQ_F_LINK_TIMEOUT altering refcounting of
the following linked request. After that someone should call
io_queue_linked_timeout(), otherwise a submission reference of the linked
timeout won't be ever dropped.
That's what happens in io_steal_work() if io-wq decides to postpone linked
request with io_wqe_enqueue(). io_queue_linked_timeout() can also be
potentially called twice without synchronisation during re-submission,
e.g. io_rw_resubmit().
There are the rules, whoever did io_prep_linked_timeout() must also call
io_queue_linked_timeout(). To not do it twice, io_prep_linked_timeout()
will return non NULL only for the first call. That's controlled by
REQ_F_LINK_TIMEOUT flag.
Also kill REQ_F_QUEUE_TIMEOUT.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since we now have that in the 5.9 branch, convert the existing users of
task_work_add() to use this new helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide a helper to run task_work instead of checking and running
manually in a bunch of different spots. While doing so, also move the
task run state setting where we run the task work. Then we can move it
out of the callback helpers. This also helps ensure we only do this once
per task_work list run, not per task_work item.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull in task_work changes from the 5.8 series, as we'll need to apply
the same kind of changes to other parts in the 5.9 branch.
* io_uring-5.8:
io_uring: fix regression with always ignoring signals in io_cqring_wait()
io_uring: use signal based task_work running
task_work: teach task_work_add() to do signal_wake_up()
When switching to TWA_SIGNAL for task_work notifications, we also made
any signal based condition in io_cqring_wait() return -ERESTARTSYS.
This breaks applications that rely on using signals to abort someone
waiting for events.
Check if we have a signal pending because of queued task_work, and
repeat the signal check once we've run the task_work. This provides a
reliable way of telling the two apart.
Additionally, only use TWA_SIGNAL if we are using an eventfd. If not,
we don't have the dependency situation described in the original commit,
and we can get by with just using TWA_RESUME like we previously did.
Fixes: ce593a6c48 ("io_uring: use signal based task_work running")
Cc: stable@vger.kernel.org # v5.7
Reported-by: Andres Freund <andres@anarazel.de>
Tested-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since 5.7, we've been using task_work to trigger async running of
requests in the context of the original task. This generally works
great, but there's a case where if the task is currently blocked
in the kernel waiting on a condition to become true, it won't process
task_work. Even though the task is woken, it just checks whatever
condition it's waiting on, and goes back to sleep if it's still false.
This is a problem if that very condition only becomes true when that
task_work is run. An example of that is the task registering an eventfd
with io_uring, and it's now blocked waiting on an eventfd read. That
read could depend on a completion event, and that completion event
won't get trigged until task_work has been run.
Use the TWA_SIGNAL notification for task_work, so that we ensure that
the task always runs the work when queued.
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a fancy bug, where exiting user task may not have ->mm,
that makes task_works to try to do kthread_use_mm(ctx->sqo_mm).
Don't do that if sqo_mm is NULL.
[ 290.460558] WARNING: CPU: 6 PID: 150933 at kernel/kthread.c:1238
kthread_use_mm+0xf3/0x110
[ 290.460579] CPU: 6 PID: 150933 Comm: read-write2 Tainted: G
I E 5.8.0-rc2-00066-g9b21720607cf #531
[ 290.460580] RIP: 0010:kthread_use_mm+0xf3/0x110
...
[ 290.460584] Call Trace:
[ 290.460584] __io_sq_thread_acquire_mm.isra.0.part.0+0x25/0x30
[ 290.460584] __io_req_task_submit+0x64/0x80
[ 290.460584] io_req_task_submit+0x15/0x20
[ 290.460585] task_work_run+0x67/0xa0
[ 290.460585] do_exit+0x35d/0xb70
[ 290.460585] do_group_exit+0x43/0xa0
[ 290.460585] get_signal+0x140/0x900
[ 290.460586] do_signal+0x37/0x780
[ 290.460586] __prepare_exit_to_usermode+0x126/0x1c0
[ 290.460586] __syscall_return_slowpath+0x3b/0x1c0
[ 290.460587] do_syscall_64+0x5f/0xa0
[ 290.460587] entry_SYSCALL_64_after_hwframe+0x44/0xa9
following with faults.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
gcc 9.2.0 compiles io_req_find_next() as a separate function leaving
the first REQ_F_LINK_HEAD fast check not inlined. Help it by splitting
out the check from the function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
