Some of these loop types aren't described, and they should be with the
definitions to make it easier to tell what each of them do.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a race between systemd and mount, as both of them try to register
the device in the kernel. When systemd loses the race, it prints the
following message:
BTRFS error: device /dev/sdb7 belongs to fsid 1b3bacbf-14db-49c9-a3ef-547998aacc4e, and the fs is already mounted.
The 'btrfs dev scan' registers one device at a time, so there is no way
for the mount thread to wait in the kernel for all the devices to have
registered as it won't know if all the devices are discovered.
For now, improve the error log by printing the command name and process
ID along with the error message.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fold folio_account_redirty into folio_redirty_for_writepage now
that all other users except for the also unused account_page_redirty
wrapper are gone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For zoned file systems we need to use run_delalloc_zoned to submit
writeback, as we need to write out partial allocations when running into
zone active limits.
submit_uncompressed_range currently always calls cow_file_range to
allocate blocks and thus misses the active zone limits handling. Fix
this by passing the pages_dirty argument to run_delalloc_zoned and always
using it from submit_uncompressed_range as it does the right thing for
zoned and non-zoned file systems.
To account for the fact that run_delalloc_zoned is now also used for
non-zoned file systems rename it to run_delalloc_cow, and add comment
describing it.
Fixes: 42c0110009 ("btrfs: zoned: introduce dedicated data write path for zoned filesystems")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
extent_write_locked_range currently expects that either all or no
pages are dirty when it is called. Bur run_delalloc_zoned is called
directly in the writepages path, and has the dirty bit cleared only
for locked_page and which the extent_write_cache_pages currently
operates. It currently works around this by redirtying locked_page,
but that is a bit inefficient and cumbersome. Pass a locked_page
argument to run_delalloc_zoned so that clearing the dirty bit can
be skipped on just that page.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Handling of the done_offset to cow_file_range is a bit confusing, as
it is not updated at all when the function succeeds, and the -EAGAIN
status is used bother for the case where we need to wait for a zone
finish and the one where the allocation was partially successful.
Change the calling convention so that done_offset is always updated,
and 0 is returned if some allocation was successful (partial allocation
can still only happen for zoned devices), and waiting for a zone
finish is done internally in cow_file_range instead of the caller.
Also write a comment explaining the logic.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
compress_file_range needs to clear the dirty bit before handing off work
to the compression worker threads to prevent processes coming in through
mmap and changing the file contents while the compression is accessing
the data (See commit 4adaa61102 ("Btrfs: fix race between mmap writes
and compression").
But when compress_file_range decides to not compress the data, it falls
back to submit_uncompressed_range which uses extent_write_locked_range
to write the uncompressed data. extent_write_locked_range currently
expects all pages to be marked dirty so that it can clear the dirty
bit itself, and thus compress_file_range has to redirty the page range.
Redirtying the page range is rather inefficient and also pointless,
so instead pass a pages_dirty parameter to extent_write_locked_range
and skip the redirty game entirely.
Note that compress_file_range was even redirtying the locked_page twice
given that extent_range_clear_dirty_for_io already redirties all pages
in the range, which must include locked_page if there is one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
compress_file_range has two code blocks to free the page array for the
compressed data. Share the code using a goto label.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
compress_file_range can fail to compress either because of resource or
alignment constraints or because the data is incompressible. In the latter
case the inode is marked so that compression isn't tried again. Currently
that check is based on the condition that the pages array has been allocated
which is rather cryptic. Use a separate label to clearly distinguish this
case.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the logic whether to compress or not in compress_file_range is
a bit convoluted because it tries to share code for creating inline
extents for the compressible [1] path and the bail to uncompressed path.
But the latter isn't needed at all, because cow_file_range as called by
submit_uncompressed_range will already create inline extents as needed,
so there is no need to have special handling for it if we can live with
the fact that it will be called a bit later in the ->ordered_func of the
workqueue instead of right now.
[1] there is undocumented logic that creates an uncompressed inline
extent outside of the shall not compress logic if total_in is too small.
This logic isn't explained in comments or any commit log I could find,
so I've preserved it. Documentation explaining it would be appreciated
if anyone understands this code.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reorder compress_file_range so that the main compression flow happens
straight line and not in branches. To do this ensure that pages is
always zeroed before a page allocation happens, which allows the
cleanup_and_bail_uncompressed label to clean up the page allocations
as needed.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The code in submit_compressed_extents just loops over the async_extents,
and doesn't need to be conditional on an inode being present, as there
won't be any async_extent in the list if we created and inline extent.
Merge the two functions to simplify the logic.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no good reason to have the simple async_cow_start wrapper,
merge the argument conversion into the main compress_file_range function.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the ->inode check isn't needed in submit_compressed_extents
any more, there is no reason to clear the field early. Always keep
the inode around until the work item is finished and remove the special
casing, and the counting of compressed extents in compress_file_range.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of checking for a NULL !pages and explaining this with a cryptic
comment, just check the compression type for BTRFS_COMPRESS_NONE to make
the check self-explanatory.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of a separate page_started argument that tells the callers that
btrfs_run_delalloc_range already started writeback by itself, overload
the return value with a positive 1 in additio to 0 and a negative error
code to indicate that is has already started writeback, and remove the
nr_written argument as that caller can calculate it directly based on
the range, and in fact already does so for the case where writeback
wasn't started yet.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently writepage_delalloc adds to delalloc_to_write in every loop
operation. That is not only more work than doing it once after the
loop, but can also over-increment the counter due to rounding errors
when a new loop iteration starts with an offset into a page.
Add a new page_start variable instead of recaculation that value over
and over, move the delalloc_to_write calculation out of the loop, use
the DIV_ROUND_UP helper instead of open coding it and remove the pointless
found local variable.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The return value from extent_write_locked_range is ignored, and that's
fine because the error reporting happens through the mapping and
ordered_extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The return value from submit_uncompressed_range is ignored, and that's
fine because the error reporting happens through the mapping and
ordered_extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the printk that is supposed to help to debug failures in
submit_one_async_extent into submit_one_async_extent and make it
coniditonal on actually having an error condition instead of spamming
the log unconditionally.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
end_extent_writepage is a small helper that combines a call to
btrfs_mark_ordered_io_finished with conditional error-only calls to
btrfs_page_clear_uptodate and mapping_set_error with a somewhat
unfortunate calling convention that passes and inclusive end instead
of the len expected by the underlying functions.
Remove end_extent_writepage and open code it in the 4 callers. Out
of those two already are error-only and thus don't need the extra
conditional, and one already has the mapping_set_error, so a duplicate
call can be avoided.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_writepage_endio_finish_ordered is a small wrapper around
btrfs_mark_ordered_io_finished that just changs the argument passing
slightly, and adds a tracepoint.
Move the tracpoint to btrfs_mark_ordered_io_finished, which means
it now also covers the error handling in btrfs_cleanup_ordered_extent
and switch all callers to just call btrfs_mark_ordered_io_finished
directly.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a lot of complexity in __process_pages_contig to deal with the
PAGE_LOCK case that can return an error unlike all the other actions.
Open code the page iteration for page locking in lock_delalloc_pages and
remove all the now unused code from __process_pages_contig.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For NOCOW files, run_delalloc_nocow can still fall back to COW
allocations when required and calls to fallback_to_cow helper for
that. For such an allocation we can have multiple ordered_extents
for existing extents that NOCOW overwrites and new allocations that
fallback_to_cow creates. If one of the new extents is an inline
extent, the writepages could would have to avoid normal page writeback
for them as indicated by the page_started return argument, which
run_delalloc_nocow can't return. Fix this by never creating inline
extents from fallback_to_cow.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The int used as bool unlock is not a very good way to describe the
behavior, and the next patch will have to add another behavior modifier.
We'll do that by two bool parameters instead of adding bit flags. Now
specifies that the pages should always be kept locked. This is the
inverse of the old unlock argument.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ switch flags to bool ]
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_start_transaction reserves metadata space of the PERTRANS type
before it identifies a transaction to start/join. This allows flushing
when reserving that space without a deadlock. However, it results in a
race which temporarily breaks qgroup rsv accounting.
T1 T2
start_transaction
do_stuff
start_transaction
qgroup_reserve_meta_pertrans
commit_transaction
qgroup_free_meta_all_pertrans
hit an error starting txn
goto reserve_fail
qgroup_free_meta_pertrans (already freed!)
The basic issue is that there is nothing preventing another commit from
committing before start_transaction finishes (in fact sometimes we
intentionally wait for it) so any error path that frees the reserve is
at risk of this race.
While this exact space was getting freed anyway, and it's not a huge
deal to double free it (just a warning, the free code catches this), it
can result in incorrectly freeing some other pertrans reservation in
this same reservation, which could then lead to spuriously granting
reservations we might not have the space for. Therefore, I do believe it
is worth fixing.
To fix it, use the existing prealloc->pertrans conversion mechanism.
When we first reserve the space, we reserve prealloc space and only when
we are sure we have a transaction do we convert it to pertrans. This way
any racing commits do not blow away our reservation, but we still get a
pertrans reservation that is freed when _this_ transaction gets committed.
This issue can be reproduced by running generic/269 with either qgroups
or squotas enabled via mkfs on the scratch device.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
If we do a write whose bio suffers an error, we will never reclaim the
qgroup reserved space for it. We allocate the space in the write_iter
codepath, then release the reservation as we allocate the ordered
extent, but we only create a delayed ref if the ordered extent finishes.
If it has an error, we simply leak the rsv. This is apparent in running
any error injecting (dmerror) fstests like btrfs/146 or btrfs/160. Such
tests fail due to dmesg on umount complaining about the leaked qgroup
data space.
When we clean up other aspects of space on failed ordered_extents, also
free the qgroup rsv.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
While performing compressed writes, if the extent reservation fails, the
async extent pages are first freed in the error check for return value
ret, and then again at out_free label.
Remove the first call to free_async_extent_pages().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Initially we preallocate btrfs_subpage structure in the main loop of
alloc_extent_buffer().
But later commit fbca46eb46 ("btrfs: make nodesize >= PAGE_SIZE case
to reuse the non-subpage routine") has made sure we only go subpage
routine if our nodesize is smaller than PAGE_SIZE.
This means for that case, we only need to allocate the subpage structure
once anyway.
So this patch would make the preallocation out of the main loop. This
would slightly reduce the workload when we hold the page lock, and make
code a little easier to read.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
nr_alloc_stripes can't be one if we are writing to a replacement device,
as it is incremented for that case right above. Remove the duplicate
checks.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The @path in scrub_simple_mirror() is no longer utilized after commit
e02ee89baa ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe
infrastructure").
Before that commit, we call find_first_extent_item() directly, which
needs a path and that path can be reused. But after that switch commit,
the extent search is done inside queue_scrub_stripe(), which will no
longer accept a path from outside.
So the @path variable can be safely removed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ remove the stale comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Simplify code pattern of 'folio->index + folio_nr_pages(folio)' by using
the existing helper folio_next_index().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Minjie Du <duminjie@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a helper for obtaining size of a struct member, we can use it
instead of open coding the pointer magic.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The integrity checker feature needs to be enabled at compile time
(BTRFS_FS_CHECK_INTEGRITY) and then enabled by mount options check_int*.
Although it provides some unique features which can not be provided by
any other sanity checks like tree-checker, it does not only have high
CPU and memory overhead, but is also a maintenance burden.
For example, it's the only caller of btrfs_map_block() with
@need_raid_map = 0.
Considering most btrfs developers are not even testing this feature, I'm
here to propose deprecation of this feature.
For now only warning messages will be printed, the feature itself would
still work.
Removal time has been set to 6.7 release.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_free_excluded_extents() is only used by block-group.c,
so move it into block-group.c and make it static. Also removed unnecessary
variables that are used only once.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The code for btrfs_add_excluded_extent() is trivial, it's just a
set_extent_bit() call. However it's defined in extent-tree.c but it is
only used (twice) in block-group.c. So open code it in block-group.c,
reducing the need to export a trivial function.
Also since the only caller btrfs_add_excluded_extent() is prepared to
deal with errors, stop ignoring errors from the set_extent_bit() call.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently find_first_extent_bit() returns a 0 if it found a range in the
given io tree and 1 if it didn't find any. There's no need to return any
errors, so make the return value a boolean and invert the logic to make
more sense: return true if it found a range and false if it didn't find
any range.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_destroy_pinned_extent() is always returning 0 no matter
what and its caller ignores its return value (as well everything up in
the call chain). This is because this is called in the transaction abort
path, where we can't even deal with any errors since we are in a critical
situation already and cleanup of resources is done in a best effort
fashion.
So make btrfs_destroy_pinned_extent() return void.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_destroy_marked_extents() is returning the value of the
last call to find_first_extent_bit(), which returns a value of 1 meaning
no more ranges found the dirty pages io tree. This value is useless to the
single caller of btrfs_destroy_marked_extents(), which ignores any return
value from btrfs_destroy_marked_extents(). This is because it's only used
in the transaction abort path, where we can't even deal with any errors
since we are in a critical situation already and cleanup of resources is
done in a best effort fashion.
So make btrfs_destroy_marked_extents() return void.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since add_new_free_space() is exported, used outside block-group.c, rename
it to include the 'btrfs_' prefix.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The documentation for add_new_free_space() is stale and no longer correct:
1) It's no longer used only when caching a block group. It's also called
when creating a block group (btrfs_make_block_group()), when reading
a block group at mount time (read_one_block_group()) and when reading
the free space tree for a block group (typically the first time we
attempt to allocate from the block group);
2) It has nothing to do with pinned extents. It only deals with the
excluded extents io tree, which is used to track the locations of
super blocks in order to make sure we never add the location of a
super block to the free space cache of a block group.
So update the documention and also add a description of the arguments
and return values.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After commit 6bfd0133be ("btrfs: raid56: switch scrub path to use a
single function"), the raid56 implementation no longer uses different
endio functions for RMW/recover/scrub.
All read operations end in submit_read_wait_bio_list(), while all write
operations end in submit_write_bios(). This means quite some trace
events are out-of-date and no longer utilized.
This patch would unify the trace events into just two:
- trace_raid56_read()
Replaces trace_raid56_read_partial(), trace_raid56_scrub_read() and
trace_raid56_scrub_read_recover().
- trace_raid56_write()
Replaces trace_raid56_write_stripe() and
trace_raid56_scrub_write_stripe().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
ACL support depends on the compile-time configuration option
CONFIG_BTRFS_FS_POSIX_ACL. Prior to mounting a btrfs filesystem, it is not
possible to determine whether ACL support has been compiled in. To address
this, add a sysfs interface, /sys/fs/btrfs/features/acl, and check for ACL
support in the system's btrfs.
To determine ACL support:
Return 0 indicates ACL is not supported:
$ cat /sys/fs/btrfs/features/acl
0
Return 1 indicates ACL is supported:
$ cat /sys/fs/btrfs/features/acl
1
IMO, this is a better approach, so that we also know if kernel is older.
On an older kernel
$ ls /sys/fs/btrfs/features/acl
ls: cannot access '/sys/fs/btrfs/features/acl': No such file or directory
mount a btrfs filesystem
$ cat /proc/self/mounts | grep btrfs | grep -q noacl
$ echo $?
0
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit aca43fe839 ("btrfs: remove unused raid56 functions which were
dedicated for scrub") removed the special handling of RAID56 scrub for
missing device.
As scrub goes full mirror_num based recovery, that means if it hits a
missing device in RAID56, it would just try the next mirror, which would
go through the BTRFS_RBIO_READ_REBUILD operation.
This means there is no longer any use of BTRFS_RBIO_REBUILD_MISSING
operation and we can safely remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_map_block() is a critical part of the btrfs storage
layer, which handles mapping of logical ranges to physical ranges.
Thus it's better to have some basic explanation, especially on the
following points:
- Segment split by various boundaries
As a continuous logical range may be split into different segments,
due to various factors like zones and RAID0/5/6/10 boundaries.
- The meaning of @mirror_num
- The possible single stripe optimization
- One deprecated parameter @need_raid_map
Just explicitly mark it deprecated so we're aware of the problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The variables leaf and slot are initialized when declared but the values
assigned to them are never read as they are being re-assigned later on.
The initializations are redundant and can be removed. Cleans up clang
scan build warnings:
fs/btrfs/tree-log.c:6797:25: warning: Value stored to 'leaf' during its
initialization is never read [deadcode.DeadStores]
fs/btrfs/tree-log.c:6798:7: warning: Value stored to 'slot' during its
initialization is never read [deadcode.DeadStores]
It's been there since b8aa330d2a ("Btrfs: improve performance on fsync
of files with multiple hardlinks") without any usage so it's safe to be
removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Variable stripe_nr is being divided by map->num_stripes however the
result is never read. The division and assignment are redundant and
can be removed. Cleans up clang scan build warning:
fs/btrfs/scrub.c:1264:3: warning: Value stored to 'stripe_nr' is
never read [deadcode.DeadStores]
The code is a leftover from 6ded22c1bf ("btrfs: reduce div64 calls by
limiting the number of stripes of a chunk to u32") that converted div64
to normal division, it's the same but previous version did not trigger a
warning.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use vcalloc that checks potential multiplication overflows. The changes
were done using Coccinelle semantic patch.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Here are some small tty and serial core fixes for 6.5-rc7 that resolve a
lot of reported issues.
Primarily in here is the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of different
types of systems and serial ports. All of the reported issues with
duplicate names and other issues with this code are now resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZOEjmg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykpSgCfajOM7BUzL1kOrfKNvHQuPmOYlIUAnAot+4M+
HkvS58Xs2+PM14y/KG1j
=6DRj
-----END PGP SIGNATURE-----
Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial core fixes for 6.5-rc7 that resolve
a lot of reported issues.
Primarily in here are the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of
different types of systems and serial ports. All of the reported
issues with duplicate names and other issues with this code are now
resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Fix serial core port id, including multiport devices
serial: 8250: drop lockdep annotation from serial8250_clear_IER()
tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
serial: core: Revert port_id use
TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
serial: 8250: Fix oops for port->pm on uart_change_pm()
serial: 8250: Reinit port_id when adding back serial8250_isa_devs
serial: core: Fix kmemleak issue for serial core device remove
MAINTAINERS: Merge TTY layer and serial drivers
serial: core: Fix serial_base_match() after fixing controller port name
serial: core: Fix serial core controller port name to show controller id
serial: core: Fix serial core port id to not use port->line
serial: core: Controller id cannot be negative
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
