Commit Graph

874 Commits

Author SHA1 Message Date
Andres Lagar-Cavilla 234b239bea kvm: Faults which trigger IO release the mmap_sem
When KVM handles a tdp fault it uses FOLL_NOWAIT. If the guest memory
has been swapped out or is behind a filemap, this will trigger async
readahead and return immediately. The rationale is that KVM will kick
back the guest with an "async page fault" and allow for some other
guest process to take over.

If async PFs are enabled the fault is retried asap from an async
workqueue. If not, it's retried immediately in the same code path. In
either case the retry will not relinquish the mmap semaphore and will
block on the IO. This is a bad thing, as other mmap semaphore users
now stall as a function of swap or filemap latency.

This patch ensures both the regular and async PF path re-enter the
fault allowing for the mmap semaphore to be relinquished in the case
of IO wait.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:07:54 +02:00
Paolo Bonzini 3c3c29fd0d kvm-vfio: do not use module_init
/me got confused between the kernel and QEMU.  In the kernel, you can
only have one module_init function, and it will prevent unloading the
module unless you also have the corresponding module_exit function.

So, commit 80ce163972 (KVM: VFIO: register kvm_device_ops dynamically,
2014-09-02) broke unloading of the kvm module, by adding a module_init
function and no module_exit.

Repair it by making kvm_vfio_ops_init weak, and checking it in
kvm_init.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Alex Williamson <Alex.Williamson@redhat.com>
Fixes: 80ce163972
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:06:36 +02:00
Christoffer Dall 29f1b65b59 KVM: EVENTFD: Remove inclusion of irq.h
Commit c77dcac (KVM: Move more code under CONFIG_HAVE_KVM_IRQFD) added
functionality that depends on definitions in ioapic.h when
__KVM_HAVE_IOAPIC is defined.

At the same time, kvm-arm commit 0ba0951 (KVM: EVENTFD: remove inclusion
of irq.h) removed the inclusion of irq.h, an architecture-specific header
that is not present on ARM but which happened to include ioapic.h on x86.

Include ioapic.h directly in eventfd.c if __KVM_HAVE_IOAPIC is defined.
This fixes x86 and lets ARM use eventfd.c.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 12:06:25 +02:00
Paolo Bonzini 9542639387 Fixes unaligned access to the gicv2 virtual cpu status.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUIJAcAAoJEEtpOizt6ddyXeAH/AiI0baWL4NZs3nFWt2+Pc1/
 hQAEquucdoGd4I7BLIAbcrJMwSc2zYe2mQWkJ1EVroqSdk5upkqWGvnqdEwt3WXH
 kWpqK7B3JjNTShTESYpjRv/ymOYq/a/cjbW3B0wSuuc46TUc97pOa1VMK8k3XknJ
 45GYKSxVCW4fKPnXN8H1PIxWy3oGia6kGm+yV/r8hKpX7dAK/AuOOVT3oaE9IAgJ
 MnwGCc4AHyj2wD5DVfiWlkABf/JcRv29wu42w1KGGfHjZPHXO8WmgcJai5HxLa9G
 NnBr/7sIIj5RFlAmFsbX4tLBwsNIHSs5TxPXeyYH+eEvQehqmiVjVh1ca/SuXGQ=
 =tqqB
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-v3.17-rc7-or-final' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

Fixes unaligned access to the gicv2 virtual cpu status.
2014-09-23 15:18:02 +02:00
Christoffer Dall 1f2bb4acc1 arm/arm64: KVM: Fix unaligned access bug on gicv2 access
We were using an atomic bitop on the vgic_v2.vgic_elrsr field which was
not aligned to the natural size on 64-bit platforms.  This bug showed up
after QEMU correctly identifies the pl011 line as being level-triggered,
and not edge-triggered.

These data structures are protected by a spinlock so simply use a
non-atomic version of the accessor instead.

Tested-by: Joel Schopp <joel.schopp@amd.com>
Reported-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-22 23:05:56 +02:00
Sam Bobroff 27fbe64bfa KVM: correct null pid check in kvm_vcpu_yield_to()
Correct a simple mistake of checking the wrong variable
before a dereference, resulting in the dereference not being
properly protected by rcu_dereference().

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-22 13:21:29 +02:00
Marc Zyngier a98f26f183 arm/arm64: KVM: vgic: make number of irqs a configurable attribute
In order to make the number of interrupts configurable, use the new
fancy device management API to add KVM_DEV_ARM_VGIC_GRP_NR_IRQS as
a VGIC configurable attribute.

Userspace can now specify the exact size of the GIC (by increments
of 32 interrupts).

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:58 -07:00
Marc Zyngier 4956f2bc1f arm/arm64: KVM: vgic: delay vgic allocation until init time
It is now quite easy to delay the allocation of the vgic tables
until we actually require it to be up and running (when the first
vcpu is kicking around, or someones tries to access the GIC registers).

This allow us to allocate memory for the exact number of CPUs we
have. As nobody configures the number of interrupts just yet,
use a fallback to VGIC_NR_IRQS_LEGACY.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:58 -07:00
Marc Zyngier 5fb66da640 arm/arm64: KVM: vgic: kill VGIC_NR_IRQS
Nuke VGIC_NR_IRQS entierly, now that the distributor instance
contains the number of IRQ allocated to this GIC.

Also add VGIC_NR_IRQS_LEGACY to preserve the current API.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:57 -07:00
Marc Zyngier c3c918361a arm/arm64: KVM: vgic: handle out-of-range MMIO accesses
Now that we can (almost) dynamically size the number of interrupts,
we're facing an interesting issue:

We have to evaluate at runtime whether or not an access hits a valid
register, based on the sizing of this particular instance of the
distributor. Furthermore, the GIC spec says that accessing a reserved
register is RAZ/WI.

For this, add a new field to our range structure, indicating the number
of bits a single interrupts uses. That allows us to find out whether or
not the access is in range.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:57 -07:00
Marc Zyngier fc675e355e arm/arm64: KVM: vgic: kill VGIC_MAX_CPUS
We now have the information about the number of CPU interfaces in
the distributor itself. Let's get rid of VGIC_MAX_CPUS, and just
rely on KVM_MAX_VCPUS where we don't have the choice. Yet.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:57 -07:00
Marc Zyngier fb65ab63b8 arm/arm64: KVM: vgic: Parametrize VGIC_NR_SHARED_IRQS
Having a dynamic number of supported interrupts means that we
cannot relly on VGIC_NR_SHARED_IRQS being fixed anymore.

Instead, make it take the distributor structure as a parameter,
so it can return the right value.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:56 -07:00
Marc Zyngier c1bfb577ad arm/arm64: KVM: vgic: switch to dynamic allocation
So far, all the VGIC data structures are statically defined by the
*maximum* number of vcpus and interrupts it supports. It means that
we always have to oversize it to cater for the worse case.

Start by changing the data structures to be dynamically sizeable,
and allocate them at runtime.

The sizes are still very static though.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:52 -07:00
Marc Zyngier 71afaba4a2 KVM: ARM: vgic: plug irq injection race
As it stands, nothing prevents userspace from injecting an interrupt
before the guest's GIC is actually initialized.

This goes unnoticed so far (as everything is pretty much statically
allocated), but ends up exploding in a spectacular way once we switch
to a more dynamic allocation (the GIC data structure isn't there yet).

The fix is to test for the "ready" flag in the VGIC distributor before
trying to inject the interrupt. Note that in order to avoid breaking
userspace, we have to ignore what is essentially an error.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-18 18:45:06 -07:00
Christoffer Dall 7e362919a5 arm/arm64: KVM: vgic: Clarify and correct vgic documentation
The VGIC virtual distributor implementation documentation was written a
very long time ago, before the true nature of the beast had been
partially absorbed into my bloodstream.  Clarify the docs.

Plus, it fixes an actual bug.  ICFRn, pfff.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-18 18:44:32 -07:00
Christoffer Dall 9da48b5502 arm/arm64: KVM: vgic: Fix SGI writes to GICD_I{CS}PENDR0
Writes to GICD_ISPENDR0 and GICD_ICPENDR0 ignore all settings of the
pending state for SGIs.  Make sure the implementation handles this
correctly.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-18 18:44:32 -07:00
Christoffer Dall faa1b46c3e arm/arm64: KVM: vgic: Improve handling of GICD_I{CS}PENDRn
Writes to GICD_ISPENDRn and GICD_ICPENDRn are currently not handled
correctly for level-triggered interrupts.  The spec states that for
level-triggered interrupts, writes to the GICD_ISPENDRn activate the
output of a flip-flop which is in turn or'ed with the actual input
interrupt signal.  Correspondingly, writes to GICD_ICPENDRn simply
deactivates the output of that flip-flop, but does not (of course) affect
the external input signal.  Reads from GICC_IAR will also deactivate the
flip-flop output.

This requires us to track the state of the level-input separately from
the state in the flip-flop.  We therefore introduce two new variables on
the distributor struct to track these two states.  Astute readers may
notice that this is introducing more state than required (because an OR
of the two states gives you the pending state), but the remaining vgic
code uses the pending bitmap for optimized operations to figure out, at
the end of the day, if an interrupt is pending or not on the distributor
side.  Refactoring the code to consider the two state variables all the
places where we currently access the precomputed pending value, did not
look pretty.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-18 18:44:31 -07:00
Christoffer Dall cced50c928 arm/arm64: KVM: vgic: Clear queued flags on unqueue
If we unqueue a level-triggered interrupt completely, and the LR does
not stick around in the active state (and will therefore no longer
generate a maintenance interrupt), then we should clear the queued flag
so that the vgic can actually queue this level-triggered interrupt at a
later time and deal with its pending state then.

Note: This should actually be properly fixed to handle the active state
on the distributor.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-18 18:44:31 -07:00
Christoffer Dall dbf20f9d81 arm/arm64: KVM: Rename irq_active to irq_queued
We have a special bitmap on the distributor struct to keep track of when
level-triggered interrupts are queued on the list registers.  This was
named irq_active, which is confusing, because the active state of an
interrupt as per the GIC spec is a different thing, not specifically
related to edge-triggered/level-triggered configurations but rather
indicates an interrupt which has been ack'ed but not yet eoi'ed.

Rename the bitmap and the corresponding accessor functions to irq_queued
to clarify what this is actually used for.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-18 18:44:30 -07:00
Christoffer Dall 227844f538 arm/arm64: KVM: Rename irq_state to irq_pending
The irq_state field on the distributor struct is ambiguous in its
meaning; the comment says it's the level of the input put, but that
doesn't make much sense for edge-triggered interrupts.  The code
actually uses this state variable to check if the interrupt is in the
pending state on the distributor so clarify the comment and rename the
actual variable and accessor methods.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-18 18:44:30 -07:00
Christoffer Dall a875dafcf9 Merge remote-tracking branch 'kvm/next' into queue
Conflicts:
	arch/arm64/include/asm/kvm_host.h
	virt/kvm/arm/vgic.c
2014-09-18 18:15:32 -07:00
Will Deacon 80ce163972 KVM: VFIO: register kvm_device_ops dynamically
Now that we have a dynamic means to register kvm_device_ops, use that
for the VFIO kvm device, instead of relying on the static table.

This is achieved by a module_init call to register the ops with KVM.

Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alex Williamson <Alex.Williamson@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-17 13:10:10 +02:00
Cornelia Huck 84877d9333 KVM: s390: register flic ops dynamically
Using the new kvm_register_device_ops() interface makes us get rid of
an #ifdef in common code.

Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-17 13:10:09 +02:00
Will Deacon c06a841bf3 KVM: ARM: vgic: register kvm_device_ops dynamically
Now that we have a dynamic means to register kvm_device_ops, use that
for the ARM VGIC, instead of relying on the static table.

Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-17 13:10:09 +02:00
Will Deacon d60eacb070 KVM: device: add simple registration mechanism for kvm_device_ops
kvm_ioctl_create_device currently has knowledge of all the device types
and their associated ops. This is fairly inflexible when adding support
for new in-kernel device emulations, so move what we currently have out
into a table, which can support dynamic registration of ops by new
drivers for virtual hardware.

Cc: Alex Williamson <Alex.Williamson@redhat.com>
Cc: Alex Graf <agraf@suse.de>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-17 13:10:08 +02:00
Ethan Zhao ad0d217ca6 KVM: Use PCI device flag helper functions
Use PCI device flag helper functions when assigning or releasing device.
No functional change.

Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-16 16:18:40 -06:00
Zhang Haoyu 184564efae kvm: ioapic: conditionally delay irq delivery duringeoi broadcast
Currently, we call ioapic_service() immediately when we find the irq is still
active during eoi broadcast. But for real hardware, there's some delay between
the EOI writing and irq delivery.  If we do not emulate this behavior, and
re-inject the interrupt immediately after the guest sends an EOI and re-enables
interrupts, a guest might spend all its time in the ISR if it has a broken
handler for a level-triggered interrupt.

Such livelock actually happens with Windows guests when resuming from
hibernation.

As there's no way to recognize the broken handle from new raised ones, this patch
delays an interrupt if 10.000 consecutive EOIs found that the interrupt was
still high.  The guest can then make a little forward progress, until a proper
IRQ handler is set or until some detection routine in the guest (such as
Linux's note_interrupt()) recognizes the situation.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-16 14:44:48 +02:00
Ard Biesheuvel 85c8555ff0 KVM: check for !is_zero_pfn() in kvm_is_mmio_pfn()
Read-only memory ranges may be backed by the zero page, so avoid
misidentifying it a a MMIO pfn.

This fixes another issue I identified when testing QEMU+KVM_UEFI, where
a read to an uninitialized emulated NOR flash brought in the zero page,
but mapped as a read-write device region, because kvm_is_mmio_pfn()
misidentifies it as a MMIO pfn due to its PG_reserved bit being set.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: b88657674d ("ARM: KVM: user_mem_abort: support stage 2 MMIO page mapping")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-14 16:26:05 +02:00
Eric Auger 0ba09511dd KVM: EVENTFD: remove inclusion of irq.h
No more needed. irq.h would be void on ARM.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-11 11:31:19 +01:00
Christian Borntraeger f2a2516088 KVM: remove redundant assignments in __kvm_set_memory_region
__kvm_set_memory_region sets r to EINVAL very early.
Doing it again is not necessary. The same is true later on, where
r is assigned -ENOMEM twice.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-05 12:01:15 +02:00
Christian Borntraeger a13f533b2f KVM: remove redundant assigment of return value in kvm_dev_ioctl
The first statement of kvm_dev_ioctl is
        long r = -EINVAL;

No need to reassign the same value.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-05 12:01:15 +02:00
Christian Borntraeger 3465611318 KVM: remove redundant check of in_spin_loop
The expression `vcpu->spin_loop.in_spin_loop' is always true,
because it is evaluated only when the condition
`!vcpu->spin_loop.in_spin_loop' is false.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-05 12:01:14 +02:00
David Matlack ee3d1570b5 kvm: fix potentially corrupt mmio cache
vcpu exits and memslot mutations can run concurrently as long as the
vcpu does not aquire the slots mutex. Thus it is theoretically possible
for memslots to change underneath a vcpu that is handling an exit.

If we increment the memslot generation number again after
synchronize_srcu_expedited(), vcpus can safely cache memslot generation
without maintaining a single rcu_dereference through an entire vm exit.
And much of the x86/kvm code does not maintain a single rcu_dereference
of the current memslots during each exit.

We can prevent the following case:

   vcpu (CPU 0)                             | thread (CPU 1)
--------------------------------------------+--------------------------
1  vm exit                                  |
2  srcu_read_unlock(&kvm->srcu)             |
3  decide to cache something based on       |
     old memslots                           |
4                                           | change memslots
                                            | (increments generation)
5                                           | synchronize_srcu(&kvm->srcu);
6  retrieve generation # from new memslots  |
7  tag cache with new memslot generation    |
8  srcu_read_unlock(&kvm->srcu)             |
...                                         |
   <action based on cache occurs even       |
    though the caching decision was based   |
    on the old memslots>                    |
...                                         |
   <action *continues* to occur until next  |
    memslot generation change, which may    |
    be never>                               |
                                            |

By incrementing the generation after synchronizing with kvm->srcu readers,
we ensure that the generation retrieved in (6) will become invalid soon
after (8).

Keeping the existing increment is not strictly necessary, but we
do keep it and just move it for consistency from update_memslots to
install_new_memslots.  It invalidates old cached MMIOs immediately,
instead of having to wait for the end of synchronize_srcu_expedited,
which makes the code more clearly correct in case CPU 1 is preempted
right after synchronize_srcu() returns.

To avoid halving the generation space in SPTEs, always presume that the
low bit of the generation is zero when reconstructing a generation number
out of an SPTE.  This effectively disables MMIO caching in SPTEs during
the call to synchronize_srcu_expedited.  Using the low bit this way is
somewhat like a seqcount---where the protected thing is a cache, and
instead of retrying we can simply punt if we observe the low bit to be 1.

Cc: stable@vger.kernel.org
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-03 10:03:41 +02:00
Paolo Bonzini 00f034a12f KVM: do not bias the generation number in kvm_current_mmio_generation
The next patch will give a meaning (a la seqcount) to the low bit of the
generation number.  Ensure that it matches between kvm->memslots->generation
and kvm_current_mmio_generation().

Cc: stable@vger.kernel.org
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-03 10:03:35 +02:00
Radim Krčmář 13a34e067e KVM: remove garbage arg to *hardware_{en,dis}able
In the beggining was on_each_cpu(), which required an unused argument to
kvm_arch_ops.hardware_{en,dis}able, but this was soon forgotten.

Remove unnecessary arguments that stem from this.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29 16:35:55 +02:00
Christoffer Dall 0f8a4de3e0 KVM: Unconditionally export KVM_CAP_READONLY_MEM
The idea between capabilities and the KVM_CHECK_EXTENSION ioctl is that
userspace can, at run-time, determine if a feature is supported or not.
This allows KVM to being supporting a new feature with a new kernel
version without any need to update user space.  Unfortunately, since the
definition of KVM_CAP_READONLY_MEM was guarded by #ifdef
__KVM_HAVE_READONLY_MEM, such discovery still required a user space
update.

Therefore, unconditionally export KVM_CAP_READONLY_MEM and change the
in-kernel conditional to rely on __KVM_HAVE_READONLY_MEM.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29 13:47:04 +02:00
Will Deacon de56fb1923 KVM: vgic: declare probe function pointer as const
We extract the vgic probe function from the of_device_id data pointer,
which is const. Kill the sparse warning by ensuring that the local
function pointer is also marked as const.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-08-27 22:49:45 +02:00
Will Deacon 1fa451bcc6 KVM: vgic: return int instead of bool when checking I/O ranges
vgic_ioaddr_overlap claims to return a bool, but in reality it returns
an int. Shut sparse up by fixing the type signature.

Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-08-27 22:49:45 +02:00
Christoffer Dall 64d831269c KVM: Introduce gfn_to_hva_memslot_prot
To support read-only memory regions on arm and arm64, we have a need to
resolve a gfn to an hva given a pointer to a memslot to avoid looping
through the memslots twice and to reuse the hva error checking of
gfn_to_hva_prot(), add a new gfn_to_hva_memslot_prot() function and
refactor gfn_to_hva_prot() to use this function.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-08-27 22:46:08 +02:00
Radim Krčmář e790d9ef64 KVM: add kvm_arch_sched_in
Introduce preempt notifiers for architecture specific code.
Advantage over creating a new notifier in every arch is slightly simpler
code and guaranteed call order with respect to kvm_sched_in.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-21 18:45:21 +02:00
Christian Borntraeger 7103f60de8 KVM: avoid unnecessary synchronize_rcu
We dont have to wait for a grace period if there is no oldpid that
we are going to free. putpid also checks for NULL, so this patch
only fences synchronize_rcu.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-21 13:50:22 +02:00
Chen Gang 30d1e0e806 virt/kvm/assigned-dev.c: Set 'dev->irq_source_id' to '-1' after free it
As a generic function, deassign_guest_irq() assumes it can be called
even if assign_guest_irq() is not be called successfully (which can be
triggered by ioctl from user mode, indirectly).

So for assign_guest_irq() failure process, need set 'dev->irq_source_id'
to -1 after free 'dev->irq_source_id', or deassign_guest_irq() may free
it again.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-19 15:12:28 +02:00
Michael S. Tsirkin 350b8bdd68 kvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601)
The third parameter of kvm_iommu_put_pages is wrong,
It should be 'gfn - slot->base_gfn'.

By making gfn very large, malicious guest or userspace can cause kvm to
go to this error path, and subsequently to pass a huge value as size.
Alternatively if gfn is small, then pages would be pinned but never
unpinned, causing host memory leak and local DOS.

Passing a reasonable but large value could be the most dangerous case,
because it would unpin a page that should have stayed pinned, and thus
allow the device to DMA into arbitrary memory.  However, this cannot
happen because of the condition that can trigger the error:

- out of memory (where you can't allocate even a single page)
  should not be possible for the attacker to trigger

- when exceeding the iommu's address space, guest pages after gfn
  will also exceed the iommu's address space, and inside
  kvm_iommu_put_pages() the iommu_iova_to_phys() will fail.  The
  page thus would not be unpinned at all.

Reported-by: Jack Morgenstein <jackm@mellanox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-19 15:04:45 +02:00
Paolo Bonzini c77dcacb39 KVM: Move more code under CONFIG_HAVE_KVM_IRQFD
Commits e4d57e1ee1 (KVM: Move irq notifier implementation into
eventfd.c, 2014-06-30) included the irq notifier code unconditionally
in eventfd.c, while it was under CONFIG_HAVE_KVM_IRQCHIP before.

Similarly, commit 297e21053a (KVM: Give IRQFD its own separate enabling
Kconfig option, 2014-06-30) moved code from CONFIG_HAVE_IRQ_ROUTING
to CONFIG_HAVE_KVM_IRQFD but forgot to move the pieces that used to be
under CONFIG_HAVE_KVM_IRQCHIP.

Together, this broke compilation without CONFIG_KVM_XICS.  Fix by adding
or changing the #ifdefs so that they point at CONFIG_HAVE_KVM_IRQFD.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-06 14:24:47 +02:00
Paul Mackerras 297e21053a KVM: Give IRQFD its own separate enabling Kconfig option
Currently, the IRQFD code is conditional on CONFIG_HAVE_KVM_IRQ_ROUTING.
So that we can have the IRQFD code compiled in without having the
IRQ routing code, this creates a new CONFIG_HAVE_KVM_IRQFD, makes
the IRQFD code conditional on it instead of CONFIG_HAVE_KVM_IRQ_ROUTING,
and makes all the platforms that currently select HAVE_KVM_IRQ_ROUTING
also select HAVE_KVM_IRQFD.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-05 14:26:28 +02:00
Paul Mackerras e4d57e1ee1 KVM: Move irq notifier implementation into eventfd.c
This moves the functions kvm_irq_has_notifier(), kvm_notify_acked_irq(),
kvm_register_irq_ack_notifier() and kvm_unregister_irq_ack_notifier()
from irqchip.c to eventfd.c.  The reason for doing this is that those
functions are used in connection with IRQFDs, which are implemented in
eventfd.c.  In future we will want to use IRQFDs on platforms that
don't implement the GSI routing implemented in irqchip.c, so we won't
be compiling in irqchip.c, but we still need the irq notifiers.  The
implementation is unchanged.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-05 14:26:24 +02:00
Paul Mackerras 9957c86d65 KVM: Move all accesses to kvm::irq_routing into irqchip.c
Now that struct _irqfd does not keep a reference to storage pointed
to by the irq_routing field of struct kvm, we can move the statement
that updates it out from under the irqfds.lock and put it in
kvm_set_irq_routing() instead.  That means we then have to take a
srcu_read_lock on kvm->irq_srcu around the irqfd_update call in
kvm_irqfd_assign(), since holding the kvm->irqfds.lock no longer
ensures that that the routing can't change.

Combined with changing kvm_irq_map_gsi() and kvm_irq_map_chip_pin()
to take a struct kvm * argument instead of the pointer to the routing
table, this allows us to to move all references to kvm->irq_routing
into irqchip.c.  That in turn allows us to move the definition of the
kvm_irq_routing_table struct into irqchip.c as well.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-05 14:26:20 +02:00
Paul Mackerras 8ba918d488 KVM: irqchip: Provide and use accessors for irq routing table
This provides accessor functions for the KVM interrupt mappings, in
order to reduce the amount of code that accesses the fields of the
kvm_irq_routing_table struct, and restrict that code to one file,
virt/kvm/irqchip.c.  The new functions are kvm_irq_map_gsi(), which
maps from a global interrupt number to a set of IRQ routing entries,
and kvm_irq_map_chip_pin, which maps from IRQ chip and pin numbers to
a global interrupt number.

This also moves the update of kvm_irq_routing_table::chip[][]
into irqchip.c, out of the various kvm_set_routing_entry
implementations.  That means that none of the kvm_set_routing_entry
implementations need the kvm_irq_routing_table argument anymore,
so this removes it.

This does not change any locking or data lifetime rules.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-05 14:26:16 +02:00
Paul Mackerras 56f89f3629 KVM: Don't keep reference to irq routing table in irqfd struct
This makes the irqfd code keep a copy of the irq routing table entry
for each irqfd, rather than a reference to the copy in the actual
irq routing table maintained in kvm/virt/irqchip.c.  This will enable
us to change the routing table structure in future, or even not have a
routing table at all on some platforms.

The synchronization that was previously achieved using srcu_dereference
on the read side is now achieved using a seqcount_t structure.  That
ensures that we don't get a halfway-updated copy of the structure if
we read it while another thread is updating it.

We still use srcu_read_lock/unlock around the read side so that when
changing the routing table we can be sure that after calling
synchronize_srcu, nothing will be using the old routing.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-05 14:24:23 +02:00
Paolo Bonzini cc568ead3c Patch queue for ppc - 2014-08-01
Highlights in this release include:
 
   - BookE: Rework instruction fetch, not racy anymore now
   - BookE HV: Fix ONE_REG accessors for some in-hardware registers
   - Book3S: Good number of LE host fixes, enable HV on LE
   - Book3S: Some misc bug fixes
   - Book3S HV: Add in-guest debug support
   - Book3S HV: Preload cache lines on context switch
   - Remove 440 support
 
 Alexander Graf (31):
       KVM: PPC: Book3s PR: Disable AIL mode with OPAL
       KVM: PPC: Book3s HV: Fix tlbie compile error
       KVM: PPC: Book3S PR: Handle hyp doorbell exits
       KVM: PPC: Book3S PR: Fix ABIv2 on LE
       KVM: PPC: Book3S PR: Fix sparse endian checks
       PPC: Add asm helpers for BE 32bit load/store
       KVM: PPC: Book3S HV: Make HTAB code LE host aware
       KVM: PPC: Book3S HV: Access guest VPA in BE
       KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE
       KVM: PPC: Book3S HV: Access XICS in BE
       KVM: PPC: Book3S HV: Fix ABIv2 on LE
       KVM: PPC: Book3S HV: Enable for little endian hosts
       KVM: PPC: Book3S: Move vcore definition to end of kvm_arch struct
       KVM: PPC: Deflect page write faults properly in kvmppc_st
       KVM: PPC: Book3S: Stop PTE lookup on write errors
       KVM: PPC: Book3S: Add hack for split real mode
       KVM: PPC: Book3S: Make magic page properly 4k mappable
       KVM: PPC: Remove 440 support
       KVM: Rename and add argument to check_extension
       KVM: Allow KVM_CHECK_EXTENSION on the vm fd
       KVM: PPC: Book3S: Provide different CAPs based on HV or PR mode
       KVM: PPC: Implement kvmppc_xlate for all targets
       KVM: PPC: Move kvmppc_ld/st to common code
       KVM: PPC: Remove kvmppc_bad_hva()
       KVM: PPC: Use kvm_read_guest in kvmppc_ld
       KVM: PPC: Handle magic page in kvmppc_ld/st
       KVM: PPC: Separate loadstore emulation from priv emulation
       KVM: PPC: Expose helper functions for data/inst faults
       KVM: PPC: Remove DCR handling
       KVM: PPC: HV: Remove generic instruction emulation
       KVM: PPC: PR: Handle FSCR feature deselects
 
 Alexey Kardashevskiy (1):
       KVM: PPC: Book3S: Fix LPCR one_reg interface
 
 Aneesh Kumar K.V (4):
       KVM: PPC: BOOK3S: PR: Fix PURR and SPURR emulation
       KVM: PPC: BOOK3S: PR: Emulate virtual timebase register
       KVM: PPC: BOOK3S: PR: Emulate instruction counter
       KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page
 
 Anton Blanchard (2):
       KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue
       KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC()
 
 Bharat Bhushan (10):
       kvm: ppc: bookehv: Added wrapper macros for shadow registers
       kvm: ppc: booke: Use the shared struct helpers of SRR0 and SRR1
       kvm: ppc: booke: Use the shared struct helpers of SPRN_DEAR
       kvm: ppc: booke: Add shared struct helpers of SPRN_ESR
       kvm: ppc: booke: Use the shared struct helpers for SPRN_SPRG0-7
       kvm: ppc: Add SPRN_EPR get helper function
       kvm: ppc: bookehv: Save restore SPRN_SPRG9 on guest entry exit
       KVM: PPC: Booke-hv: Add one reg interface for SPRG9
       KVM: PPC: Remove comment saying SPRG1 is used for vcpu pointer
       KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr
 
 Michael Neuling (1):
       KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling
 
 Mihai Caraman (8):
       KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule
       KVM: PPC: e500: Fix default tlb for victim hint
       KVM: PPC: e500: Emulate power management control SPR
       KVM: PPC: e500mc: Revert "add load inst fixup"
       KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1
       KVM: PPC: Book3s: Remove kvmppc_read_inst() function
       KVM: PPC: Allow kvmppc_get_last_inst() to fail
       KVM: PPC: Bookehv: Get vcpu's last instruction for emulation
 
 Paul Mackerras (4):
       KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling
       KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled
       KVM: PPC: Book3S PR: Take SRCU read lock around RTAS kvm_read_guest() call
       KVM: PPC: Book3S: Make kvmppc_ld return a more accurate error indication
 
 Stewart Smith (2):
       Split out struct kvmppc_vcore creation to separate function
       Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJT21skAAoJECszeR4D/txgeFEP/AzJopN7s//W33CfyBqURHXp
 XALCyAw+S67gtcaTZbxomcG1xuT8Lj9WEw28iz3rCtAnJwIxsY63xrI1nXMzTaI2
 p1rC0ai5Qy+nlEbd6L78spZy/Nzh8DFYGWx78iUSO1mYD8xywJwtoiBA539pwp8j
 8N+mgn61Hwhv31bKtsZlmzXymVr/jbTp5LVuxsBLJwD2lgT49g+4uBnX2cG/iXkg
 Rzbh7LxoNNXrSPI8sYmTWu/81aeXteeX70ja6DHuV5dWLNTuAXJrh5EUfeAZqBrV
 aYcLWUYmIyB87txNmt6ZGVar2p3jr2Xhb9mKx+EN4dbehblanLc1PUqlHd0q3dKc
 Nt60ByqpZn+qDAK86dShSZLEe+GT3lovvE76CqVXD4Er+OUEkc9JoxhN1cof/Gb0
 o6uwZ2isXHRdGoZx5vb4s3UTOlwZGtoL/CyY/HD/ujYDSURkCGbxLj3kkecSY8ut
 QdDAWsC15BwsHtKLr5Zwjp2w+0eGq2QJgfvO0zqWFiz9k33SCBCUpwluFeqh27Hi
 aR5Wir3j+MIw9G8XlYlDJWYfi0h/SZ4G7hh7jSu26NBNBzQsDa8ow/cLzdMhdUwH
 OYSaeqVk5wiRb9to1uq1NQWPA0uRAx3BSjjvr9MCGRqmvn+FV5nj637YWUT+53Hi
 aSvg/U2npghLPPG2cihu
 =JuLr
 -----END PGP SIGNATURE-----

Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvm

Patch queue for ppc - 2014-08-01

Highlights in this release include:

  - BookE: Rework instruction fetch, not racy anymore now
  - BookE HV: Fix ONE_REG accessors for some in-hardware registers
  - Book3S: Good number of LE host fixes, enable HV on LE
  - Book3S: Some misc bug fixes
  - Book3S HV: Add in-guest debug support
  - Book3S HV: Preload cache lines on context switch
  - Remove 440 support

Alexander Graf (31):
      KVM: PPC: Book3s PR: Disable AIL mode with OPAL
      KVM: PPC: Book3s HV: Fix tlbie compile error
      KVM: PPC: Book3S PR: Handle hyp doorbell exits
      KVM: PPC: Book3S PR: Fix ABIv2 on LE
      KVM: PPC: Book3S PR: Fix sparse endian checks
      PPC: Add asm helpers for BE 32bit load/store
      KVM: PPC: Book3S HV: Make HTAB code LE host aware
      KVM: PPC: Book3S HV: Access guest VPA in BE
      KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE
      KVM: PPC: Book3S HV: Access XICS in BE
      KVM: PPC: Book3S HV: Fix ABIv2 on LE
      KVM: PPC: Book3S HV: Enable for little endian hosts
      KVM: PPC: Book3S: Move vcore definition to end of kvm_arch struct
      KVM: PPC: Deflect page write faults properly in kvmppc_st
      KVM: PPC: Book3S: Stop PTE lookup on write errors
      KVM: PPC: Book3S: Add hack for split real mode
      KVM: PPC: Book3S: Make magic page properly 4k mappable
      KVM: PPC: Remove 440 support
      KVM: Rename and add argument to check_extension
      KVM: Allow KVM_CHECK_EXTENSION on the vm fd
      KVM: PPC: Book3S: Provide different CAPs based on HV or PR mode
      KVM: PPC: Implement kvmppc_xlate for all targets
      KVM: PPC: Move kvmppc_ld/st to common code
      KVM: PPC: Remove kvmppc_bad_hva()
      KVM: PPC: Use kvm_read_guest in kvmppc_ld
      KVM: PPC: Handle magic page in kvmppc_ld/st
      KVM: PPC: Separate loadstore emulation from priv emulation
      KVM: PPC: Expose helper functions for data/inst faults
      KVM: PPC: Remove DCR handling
      KVM: PPC: HV: Remove generic instruction emulation
      KVM: PPC: PR: Handle FSCR feature deselects

Alexey Kardashevskiy (1):
      KVM: PPC: Book3S: Fix LPCR one_reg interface

Aneesh Kumar K.V (4):
      KVM: PPC: BOOK3S: PR: Fix PURR and SPURR emulation
      KVM: PPC: BOOK3S: PR: Emulate virtual timebase register
      KVM: PPC: BOOK3S: PR: Emulate instruction counter
      KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page

Anton Blanchard (2):
      KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue
      KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC()

Bharat Bhushan (10):
      kvm: ppc: bookehv: Added wrapper macros for shadow registers
      kvm: ppc: booke: Use the shared struct helpers of SRR0 and SRR1
      kvm: ppc: booke: Use the shared struct helpers of SPRN_DEAR
      kvm: ppc: booke: Add shared struct helpers of SPRN_ESR
      kvm: ppc: booke: Use the shared struct helpers for SPRN_SPRG0-7
      kvm: ppc: Add SPRN_EPR get helper function
      kvm: ppc: bookehv: Save restore SPRN_SPRG9 on guest entry exit
      KVM: PPC: Booke-hv: Add one reg interface for SPRG9
      KVM: PPC: Remove comment saying SPRG1 is used for vcpu pointer
      KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr

Michael Neuling (1):
      KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling

Mihai Caraman (8):
      KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule
      KVM: PPC: e500: Fix default tlb for victim hint
      KVM: PPC: e500: Emulate power management control SPR
      KVM: PPC: e500mc: Revert "add load inst fixup"
      KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1
      KVM: PPC: Book3s: Remove kvmppc_read_inst() function
      KVM: PPC: Allow kvmppc_get_last_inst() to fail
      KVM: PPC: Bookehv: Get vcpu's last instruction for emulation

Paul Mackerras (4):
      KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling
      KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled
      KVM: PPC: Book3S PR: Take SRCU read lock around RTAS kvm_read_guest() call
      KVM: PPC: Book3S: Make kvmppc_ld return a more accurate error indication

Stewart Smith (2):
      Split out struct kvmppc_vcore creation to separate function
      Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8

Conflicts:
	Documentation/virtual/kvm/api.txt
2014-08-05 09:58:11 +02:00
Paolo Bonzini 5d57686605 KVM/ARM New features for 3.17 include:
- Fixes and code refactoring for stage2 kvm MMU unmap_range
  - Support unmapping IPAs on deleting memslots for arm and arm64
  - Support MMIO mappings in stage2 faults
  - KVM VGIC v2 emulation on GICv3 hardware
  - Big-Endian support for arm/arm64 (guest and host)
  - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list)
  - Detect non page-aligned GICV regions and bail out (plugs guest-can-crash host bug)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJT3oZTAAoJEEtpOizt6ddyKQIH/1Bj/cZYSkkSf3IJfQhHRbWN
 jS37IBsvcHwjHkRJxCNmQuKP/Ho5XEusluPGrVY25PAgBMl+ouPqAuKzUk+GEab6
 snjJjDFqw0zs0x0h3tg6UwfZdF+eyyIkmFGn8/IATD5P3PPd8kWBVtYnSnZmYK+R
 KJNVcp6RPDrt9kvUDY8Ln9fW99Jl+7CdgQAnc3QkHcXUlanLyrfq+fE1lSzyrbhZ
 ETzyMFAX4kCdc8tflgyyBS4A7+RvfQ6ZIQummxoAMFHIoSk90dtK7ovX68rd9U3e
 yL+mpe130+dTIFpUMbxCnIdE7C0eud3vcgXC6MuWtFjUrxQoaEgsVE+ffGC5tX0=
 =axkp
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm

KVM/ARM New features for 3.17 include:
 - Fixes and code refactoring for stage2 kvm MMU unmap_range
 - Support unmapping IPAs on deleting memslots for arm and arm64
 - Support MMIO mappings in stage2 faults
 - KVM VGIC v2 emulation on GICv3 hardware
 - Big-Endian support for arm/arm64 (guest and host)
 - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list)

Conflicts:
	virt/kvm/arm/vgic.c [last minute cherry-pick from 3.17 to 3.16]
2014-08-05 09:47:45 +02:00
Linus Torvalds 8533ce7271 These are the x86, MIPS and s390 changes; PPC and ARM will come in a
few days.
 
 MIPS and s390 have little going on this release; just bugfixes, some
 small, some larger.
 
 The highlights for x86 are nested VMX improvements (Jan Kiszka), optimizations
 for old processor (up to Nehalem, by me and Bandan Das), and a lot of x86
 emulator bugfixes (Nadav Amit).
 
 Stephen Rothwell reported a trivial conflict with the tracing branch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJT300XAAoJEBvWZb6bTYby3V8QAJz+XyajnhJ8wH55Vxczz22L
 i2gtUGmBLhEXsBcaVKO4BBfek88lLzg0SGLjfW5wCMQmKtxVlrwTCXNkBoPGjapd
 NwHtWkMKym44PDhRovn7zkSumkxC43uFIBR/ebrhP6Bvhh9s+MnkQUxfw9ILB+YV
 EeKyEG8sSgxFCciuHbp3mIXpDcO6r/ldy6I7009OdyhLoMY+Kvmk7kRe9wtAivdg
 CGJi60QvGOn2RGRPOCEtF6UWr8Ae8fe1t84o0hkXPv/j3jtabzAatXKJa4dYNbIs
 7Mp4NQpxaGV6rq3WCYVeZRxGs+UReGDAS3Il4Z8C9eTOTooSfxdVr8acpM8PY6I8
 UmLT6ECLGycc4ELXrETtR+QLmiXACyJqyVxz4aiLV3kWSWfamKD3hBeQK9NizNcE
 VoPDl+PyISvR1tW4KstBuzfUWAEXi+gO78cqqFr/VW6cl7HKpA1DFQaPfGkYKDae
 2CPwcLwI5/M6RtSgkyXTkEqNZLc2BjldqSeM1lmWjhZVW56X2iqePUL46Vab3Yvt
 U+sELtwEE560NLN3hbaHUsLR1tcUix5w8vTzcXPxgoHQBszHCcAZTWd1XHulr64F
 rp/cangqtkPKcu5j1mNhQs38oLjHI1MUsbQrqFoD4tmHjQ75iXHRFzYGoIVKXyHG
 AnGbQzJzBcdAANhm3LW0
 =UXxV
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM changes from Paolo Bonzini:
 "These are the x86, MIPS and s390 changes; PPC and ARM will come in a
  few days.

  MIPS and s390 have little going on this release; just bugfixes, some
  small, some larger.

  The highlights for x86 are nested VMX improvements (Jan Kiszka),
  optimizations for old processor (up to Nehalem, by me and Bandan Das),
  and a lot of x86 emulator bugfixes (Nadav Amit).

  Stephen Rothwell reported a trivial conflict with the tracing branch"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (104 commits)
  x86/kvm: Resolve shadow warnings in macro expansion
  KVM: s390: rework broken SIGP STOP interrupt handling
  KVM: x86: always exit on EOIs for interrupts listed in the IOAPIC redir table
  KVM: vmx: remove duplicate vmx_mpx_supported() prototype
  KVM: s390: Fix memory leak on busy SIGP stop
  x86/kvm: Resolve shadow warning from min macro
  kvm: Resolve missing-field-initializers warnings
  Replace NR_VMX_MSR with its definition
  KVM: x86: Assertions to check no overrun in MSR lists
  KVM: x86: set rflags.rf during fault injection
  KVM: x86: Setting rflags.rf during rep-string emulation
  KVM: x86: DR6/7.RTM cannot be written
  KVM: nVMX: clean up nested_release_vmcs12 and code around it
  KVM: nVMX: fix lifetime issues for vmcs02
  KVM: x86: Defining missing x86 vectors
  KVM: x86: emulator injects #DB when RFLAGS.RF is set
  KVM: x86: Cleanup of rflags.rf cleaning
  KVM: x86: Clear rflags.rf on emulated instructions
  KVM: x86: popf emulation should not change RF
  KVM: x86: Clearing rflags.rf upon skipped emulated instruction
  ...
2014-08-04 12:16:46 -07:00
Marc Zyngier fb3ec67942 KVM: arm64: GICv3: mandate page-aligned GICV region
Just like GICv2 was fixed in 63afbe7a0a
(kvm: arm64: vgic: fix hyp panic with 64k pages on juno platform),
mandate the GICV region to be both aligned on a page boundary and
its size to be a multiple of page size.

This prevents a guest from being able to poke at regions where we
have no idea what is sitting there.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-07-31 15:59:40 +02:00
Paolo Bonzini 0f6c0a740b KVM: x86: always exit on EOIs for interrupts listed in the IOAPIC redir table
Currently, the EOI exit bitmap (used for APICv) does not include
interrupts that are masked.  However, this can cause a bug that manifests
as an interrupt storm inside the guest.  Alex Williamson reported the
bug and is the one who really debugged this; I only wrote the patch. :)

The scenario involves a multi-function PCI device with OHCI and EHCI
USB functions and an audio function, all assigned to the guest, where
both USB functions use legacy INTx interrupts.

As soon as the guest boots, interrupts for these devices turn into an
interrupt storm in the guest; the host does not see the interrupt storm.
Basically the EOI path does not work, and the guest continues to see the
interrupt over and over, even after it attempts to mask it at the APIC.
The bug is only visible with older kernels (RHEL6.5, based on 2.6.32
with not many changes in the area of APIC/IOAPIC handling).

Alex then tried forcing bit 59 (corresponding to the USB functions' IRQ)
on in the eoi_exit_bitmap and TMR, and things then work.  What happens
is that VFIO asserts IRQ11, then KVM recomputes the EOI exit bitmap.
It does not have set bit 59 because the RTE was masked, so the IOAPIC
never sees the EOI and the interrupt continues to fire in the guest.

My guess was that the guest is masking the interrupt in the redirection
table in the interrupt routine, i.e. while the interrupt is set in a
LAPIC's ISR, The simplest fix is to ignore the masking state, we would
rather have an unnecessary exit rather than a missed IRQ ACK and anyway
IOAPIC interrupts are not as performance-sensitive as for example MSIs.
Alex tested this patch and it fixed his bug.

[Thanks to Alex for his precise description of the problem
 and initial debugging effort.  A lot of the text above is
 based on emails exchanged with him.]

Reported-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-30 20:22:30 +02:00
Will Deacon 63afbe7a0a kvm: arm64: vgic: fix hyp panic with 64k pages on juno platform
If the physical address of GICV isn't page-aligned, then we end up
creating a stage-2 mapping of the page containing it, which causes us to
map neighbouring memory locations directly into the guest.

As an example, consider a platform with GICV at physical 0x2c02f000
running a 64k-page host kernel. If qemu maps this into the guest at
0x80010000, then guest physical addresses 0x80010000 - 0x8001efff will
map host physical region 0x2c020000 - 0x2c02efff. Accesses to these
physical regions may cause UNPREDICTABLE behaviour, for example, on the
Juno platform this will cause an SError exception to EL3, which brings
down the entire physical CPU resulting in RCU stalls / HYP panics / host
crashing / wasted weeks of debugging.

SBSA recommends that systems alias the 4k GICV across the bounding 64k
region, in which case GICV physical could be described as 0x2c020000 in
the above scenario.

This patch fixes the problem by failing the vgic probe if the physical
base address or the size of GICV aren't page-aligned. Note that this
generated a warning in dmesg about freeing enabled IRQs, so I had to
move the IRQ enabling later in the probe.

Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joel Schopp <joel.schopp@amd.com>
Cc: Don Dutile <ddutile@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Joel Schopp <joel.schopp@amd.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-07-30 14:35:42 +02:00
Alexander Graf 92b591a4c4 KVM: Allow KVM_CHECK_EXTENSION on the vm fd
The KVM_CHECK_EXTENSION is only available on the kvm fd today. Unfortunately
on PPC some of the capabilities change depending on the way a VM was created.

So instead we need a way to expose capabilities as VM ioctl, so that we can
see which VM type we're using (HV or PR). To enable this, add the
KVM_CHECK_EXTENSION ioctl to our vm ioctl portfolio.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-28 15:23:17 +02:00
Alexander Graf 784aa3d7fb KVM: Rename and add argument to check_extension
In preparation to make the check_extension function available to VM scope
we add a struct kvm * argument to the function header and rename the function
accordingly. It will still be called from the /dev/kvm fd, but with a NULL
argument for struct kvm *.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-28 15:23:17 +02:00
Mark Rustad 25f97ff451 kvm: Resolve missing-field-initializers warnings
Resolve missing-field-initializers warnings seen in W=2 kernel
builds by having macros generate more elaborated initializers.
That is enough to silence the warnings.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 16:05:46 +02:00
Victor Kamensky 9662fb4854 ARM64: KVM: fix vgic_bitmap_get_reg function for BE 64bit case
Fix vgic_bitmap_get_reg function to return 'right' word address of
'unsigned long' bitmap value in case of BE 64bit image.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:42 -07:00
Victor Kamensky 1c9f04717c ARM: KVM: vgic mmio should hold data as LE bytes array in BE case
According to recent clarifications of mmio.data array meaning -
the mmio.data array should hold bytes as they would appear in
memory. Vgic is little endian device. And in case of BE image
kernel side that emulates vgic, holds data in BE form. So we
need to byteswap cpu<->le32 vgic registers when we read/write them
from mmio.data[].

Change has no effect in LE case because cpu already runs in le32.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:39 -07:00
Marc Zyngier 67b2abfedb arm64: KVM: vgic: enable GICv2 emulation on top on GICv3 hardware
Add the last missing bits that enable GICv2 emulation on top of
GICv3 hardware.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:37 -07:00
Marc Zyngier b2fb1c0d37 KVM: ARM: vgic: add the GICv3 backend
Introduce the support code for emulating a GICv2 on top of GICv3
hardware.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:36 -07:00
Marc Zyngier 1a9b13056d arm64: KVM: split GICv2 world switch from hyp code
Move the GICv2 world switch code into its own file, and add the
necessary indirection to the arm64 switch code.

Also introduce a new type field to the vgic_params structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:36 -07:00
Marc Zyngier f982cf4e9c KVM: ARM: vgic: revisit implementation of irqchip_in_kernel
So far, irqchip_in_kernel() was implemented by testing the value of
vctrl_base, which worked fine with GICv2.

With GICv3, this field is useless, as we're using system registers
instead of a emmory mapped interface. To solve this, add a boolean
flag indicating if the we're using a vgic or not.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:35 -07:00
Marc Zyngier 8f186d522c KVM: ARM: vgic: split GICv2 backend from the main vgic code
Brutally hack the innocent vgic code, and move the GICv2 specific code
to its own file, using vgic_ops and vgic_params as a way to pass
information between the two blocks.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:34 -07:00
Marc Zyngier ca85f623e3 KVM: ARM: introduce vgic_params structure
Move all the data specific to a given GIC implementation into its own
little structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:34 -07:00
Marc Zyngier da8dafd177 KVM: ARM: vgic: introduce vgic_enable
Move the code dealing with enabling the VGIC on to vgic_ops.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:33 -07:00
Marc Zyngier beee38b9d0 KVM: ARM: vgic: abstract VMCR access
Instead of directly messing with with the GICH_VMCR bits for the CPU
interface save/restore code, add accessors that encode/decode the
entire set of registers exposed by VMCR.

Not the most efficient thing, but given that this code is only used
by the save/restore code, performance is far from being critical.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:33 -07:00
Marc Zyngier 909d9b5025 KVM: ARM: vgic: move underflow handling to vgic_ops
Move the code dealing with LR underflow handling to its own functions,
and make them accessible through vgic_ops.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:33 -07:00
Marc Zyngier 495dd859f3 KVM: ARM: vgic: abstract MISR decoding
Instead of directly dealing with the GICH_MISR bits, move the code to
its own function and use a couple of public flags to represent the
actual state.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:32 -07:00
Marc Zyngier 8d6a0313c1 KVM: ARM: vgic: abstract EISR bitmap access
Move the GICH_EISR access to its own function.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:32 -07:00
Marc Zyngier 69bb2c9fbc KVM: ARM: vgic: abstract access to the ELRSR bitmap
Move the GICH_ELRSR access to its own functions, and add them to
the vgic_ops structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:31 -07:00
Marc Zyngier 8d5c6b06a5 KVM: ARM: vgic: introduce vgic_ops and LR manipulation primitives
In order to split the various register manipulation from the main vgic
code, introduce a vgic_ops structure, and start by abstracting the
LR manipulation code with a couple of accessors.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:31 -07:00
Marc Zyngier eede821dbf KVM: arm/arm64: vgic: move GICv2 registers to their own structure
In order to make way for the GICv3 registers, move the v2-specific
registers to their own structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:31 -07:00
Linus Torvalds b2e09f633a Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more scheduler updates from Ingo Molnar:
 "Second round of scheduler changes:
   - try-to-wakeup and IPI reduction speedups, from Andy Lutomirski
   - continued power scheduling cleanups and refactorings, from Nicolas
     Pitre
   - misc fixes and enhancements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Delete extraneous extern for to_ratio()
  sched/idle: Optimize try-to-wake-up IPI
  sched/idle: Simplify wake_up_idle_cpu()
  sched/idle: Clear polling before descheduling the idle thread
  sched, trace: Add a tracepoint for IPI-less remote wakeups
  cpuidle: Set polling in poll_idle
  sched: Remove redundant assignment to "rt_rq" in update_curr_rt(...)
  sched: Rename capacity related flags
  sched: Final power vs. capacity cleanups
  sched: Remove remaining dubious usage of "power"
  sched: Let 'struct sched_group_power' care about CPU capacity
  sched/fair: Disambiguate existing/remaining "capacity" usage
  sched/fair: Change "has_capacity" to "has_free_capacity"
  sched/fair: Remove "power" from 'struct numa_stats'
  sched: Fix signedness bug in yield_to()
  sched/fair: Use time_after() in record_wakee()
  sched/balancing: Reduce the rate of needless idle load balancing
  sched/fair: Fix unlocked reads of some cfs_b->quota/period
2014-06-12 19:42:15 -07:00
Dan Carpenter fa93384f40 sched: Fix signedness bug in yield_to()
yield_to() is supposed to return -ESRCH if there is no task to
yield to, but because the type is bool that is the same as returning
true.

The only place I see which cares is kvm_vcpu_on_spin().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Raghavendra <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/20140523102042.GA7267@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-05 11:52:13 +02:00
Linus Torvalds b05d59dfce At over 200 commits, covering almost all supported architectures, this
was a pretty active cycle for KVM.  Changes include:
 
 - a lot of s390 changes: optimizations, support for migration,
   GDB support and more
 
 - ARM changes are pretty small: support for the PSCI 0.2 hypercall
   interface on both the guest and the host (the latter acked by Catalin)
 
 - initial POWER8 and little-endian host support
 
 - support for running u-boot on embedded POWER targets
 
 - pretty large changes to MIPS too, completing the userspace interface
   and improving the handling of virtualized timer hardware
 
 - for x86, a larger set of changes is scheduled for 3.17.  Still,
   we have a few emulator bugfixes and support for running nested
   fully-virtualized Xen guests (para-virtualized Xen guests have
   always worked).  And some optimizations too.
 
 The only missing architecture here is ia64.  It's not a coincidence
 that support for KVM on ia64 is scheduled for removal in 3.17.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjtlBAAoJEBvWZb6bTYbyMOUP/2NAePghE3IjG99ikHFdn+BX
 BfrURsuR6GD0AhYQnBidBmpFbAmN/LwSJxv/M7sV7OBRWLu3qbt69DrPTU2e/FK1
 j9q25peu8jRyHzJ1q9rBroo74nD9lQYuVr3uXNxxcg0DRnw14JHGlM3y8LDEknO8
 W+gpWTeAQ+2AuOX98MpRbCRMuzziCSv5bP5FhBVnsWHiZfvMbcUrbeJt+zYSiDAZ
 0tHm/5dFKzfj/vVrrnjD4EZcRr688Bs5rztG96hY6aoVJryjZGLtLp92wCWkRRmH
 CCvZwd245NmNthuKHzcs27/duSWfU0uOlu7AMrD44QYhzeDGyB/2nbCxbGqLLoBA
 nnOviXH4cC65/CnisZ79zfo979HbZcX+Lzg747EjBgCSxJmLlwgiG8yXtDvk5otB
 TH6GUeGDiEEPj//JD3XtgSz0sF2NvjREWRyemjDMvhz6JC/bLytXKb3sn+NXSj8m
 ujzF9eQoa4qKDcBL4IQYGTJ4z5nY3Pd68dHFIPHB7n82OxFLSQUBKxXw8/1fb5og
 VVb8PL4GOcmakQlAKtTMlFPmuy4bbL2r/2iV5xJiOZKmXIu8Hs1JezBE3SFAltbl
 3cAGwSM9/dDkKxUbTFblyOE9bkKbg4WYmq0LkdzsPEomb3IZWntOT25rYnX+LrBz
 bAknaZpPiOrW11Et1htY
 =j5Od
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into next

Pull KVM updates from Paolo Bonzini:
 "At over 200 commits, covering almost all supported architectures, this
  was a pretty active cycle for KVM.  Changes include:

   - a lot of s390 changes: optimizations, support for migration, GDB
     support and more

   - ARM changes are pretty small: support for the PSCI 0.2 hypercall
     interface on both the guest and the host (the latter acked by
     Catalin)

   - initial POWER8 and little-endian host support

   - support for running u-boot on embedded POWER targets

   - pretty large changes to MIPS too, completing the userspace
     interface and improving the handling of virtualized timer hardware

   - for x86, a larger set of changes is scheduled for 3.17.  Still, we
     have a few emulator bugfixes and support for running nested
     fully-virtualized Xen guests (para-virtualized Xen guests have
     always worked).  And some optimizations too.

  The only missing architecture here is ia64.  It's not a coincidence
  that support for KVM on ia64 is scheduled for removal in 3.17"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits)
  KVM: add missing cleanup_srcu_struct
  KVM: PPC: Book3S PR: Rework SLB switching code
  KVM: PPC: Book3S PR: Use SLB entry 0
  KVM: PPC: Book3S HV: Fix machine check delivery to guest
  KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs
  KVM: PPC: Book3S HV: Make sure we don't miss dirty pages
  KVM: PPC: Book3S HV: Fix dirty map for hugepages
  KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address
  KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates()
  KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number
  KVM: PPC: Book3S: Add ONE_REG register names that were missed
  KVM: PPC: Add CAP to indicate hcall fixes
  KVM: PPC: MPIC: Reset IRQ source private members
  KVM: PPC: Graciously fail broken LE hypercalls
  PPC: ePAPR: Fix hypercall on LE guest
  KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler
  KVM: PPC: BOOK3S: Always use the saved DAR value
  PPC: KVM: Make NX bit available with magic page
  KVM: PPC: Disable NX for old magic page using guests
  KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest
  ...
2014-06-04 08:47:12 -07:00
Paolo Bonzini 820b3fcdeb KVM: add missing cleanup_srcu_struct
Reported-by: hrg <hrgstephen@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-03 13:44:17 +02:00
Christian Borntraeger 719d93cd5f kvm/irqchip: Speed up KVM_SET_GSI_ROUTING
When starting lots of dataplane devices the bootup takes very long on
Christian's s390 with irqfd patches. With larger setups he is even
able to trigger some timeouts in some components.  Turns out that the
KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec)
when having multiple CPUs.  This is caused by the  synchronize_rcu and
the HZ=100 of s390.  By changing the code to use a private srcu we can
speed things up.  This patch reduces the boot time till mounting root
from 8 to 2 seconds on my s390 guest with 100 disks.

Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu
are fine because they do not have lockdep checks (hlist_for_each_entry_rcu
uses rcu_dereference_raw rather than rcu_dereference, and write-sides
do not do rcu lockdep at all).

Note that we're hardly relying on the "sleepable" part of srcu.  We just
want SRCU's faster detection of grace periods.

Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS
and RR.  The difference between results "before" and "after" the patch
has mean -0.2% and standard deviation 0.6%.  Using a paired t-test on the
data points says that there is a 2.5% probability that the patch is the
cause of the performance difference (rather than a random fluctuation).

(Restricting the t-test to RR, which is the most likely to be affected,
changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8%
probability that the numbers actually say something about the patch.
The probability increases mostly because there are fewer data points).

Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-05 16:29:11 +02:00
Paolo Bonzini a5a5aef451 First round of KVM/ARM Fixes for 3.15
Includes vgic fixes, a possible kernel corruption bug due to
 misalignment of pages and disabling of KVM in KConfig on big-endian
 systems, because the last one breaks the build.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJTYNiqAAoJEEtpOizt6ddy4NwH/3ZVN7sgC5vKiKEf0n5wNdN2
 zCMNOnjKfaZN7dUval3eT3qF6h0emDqW5pOFstHwoFvuMAFauLMWPQCbU1m+bl3K
 gD745kVniLKGHyE4rEwOiUNEiYGbiP44DeC1oGlirSiGNptMQjeAi3dhEtJpedES
 xtn3jY26bWrIdOZ75/pvFix2qE8CXmRJU2oEvsZ0B5gGkqsblrlcY+ascot4Rm8t
 M88SAhGs6pzMWpjfOOm55E2BXISQw18KMzETRWZgmmYgYQOaR2sH0USwQuI/Uhvx
 1UZBZSYz3KYEx3kxKnXyS7qZyWQOY8p+y487Ty9VTlzuat2gxXH9TMMA39ZIGak=
 =gpor
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

First round of KVM/ARM Fixes for 3.15

Includes vgic fixes, a possible kernel corruption bug due to
misalignment of pages and disabling of KVM in KConfig on big-endian
systems, because the last one breaks the build.
2014-04-30 21:25:09 +02:00
Haibin Wang 30c2117085 KVM: ARM: vgic: Fix the overlap check action about setting the GICD & GICC base address.
Currently below check in vgic_ioaddr_overlap will always succeed,
because the vgic dist base and vgic cpu base are still kept UNDEF
after initialization. The code as follows will be return forever.

	if (IS_VGIC_ADDR_UNDEF(dist) || IS_VGIC_ADDR_UNDEF(cpu))
                return 0;

So, before invoking the vgic_ioaddr_overlap, it needs to set the
corresponding base address firstly.

Signed-off-by: Haibin Wang <wanghaibin.wang@huawei.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-29 02:01:43 -07:00
Oleg Nesterov e9545b9f8a KVM: async_pf: change async_pf_execute() to use get_user_pages(tsk => NULL)
async_pf_execute() passes tsk == current to gup(), this is doesn't
hurt but unnecessary and misleading. "tsk" is only used to account
the number of faults and current is the random workqueue thread.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28 17:24:55 +02:00
Oleg Nesterov d72d946d0b KVM: async_pf: kill the unnecessary use_mm/unuse_mm async_pf_execute()
async_pf_execute() has no reasons to adopt apf->mm, gup(current, mm)
should work just fine even if current has another or NULL ->mm.

Recently kvm_async_page_present_sync() was added insedie the "use_mm"
section, but it seems that it doesn't need current->mm too.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28 17:24:25 +02:00
Andre Przywara f2ae85b2ab KVM: arm/arm64: vgic: fix GICD_ICFGR register accesses
Since KVM internally represents the ICFGR registers by stuffing two
of them into one word, the offset for accessing the internal
representation and the one for the MMIO based access are different.
So keep the original offset around, but adjust the internal array
offset by one bit.

Reported-by: Haibin Wang <wanghaibin.wang@huawei.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-28 04:06:22 -07:00
Oleg Nesterov 41c22f6262 KVM: async_pf: mm->mm_users can not pin apf->mm
get_user_pages(mm) is simply wrong if mm->mm_users == 0 and exit_mmap/etc
was already called (or is in progress), mm->mm_count can only pin mm->pgd
and mm_struct itself.

Change kvm_setup_async_pf/async_pf_execute to inc/dec mm->mm_users.

kvm_create_vm/kvm_destroy_vm play with ->mm_count too but this case looks
fine at first glance, it seems that this ->mm is only used to verify that
current->mm == kvm->mm.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28 13:04:46 +02:00
Haibin Wang 91021a6c8f KVM: ARM: vgic: Fix sgi dispatch problem
When dispatch SGI(mode == 0), that is the vcpu of VM should send
sgi to the cpu which the target_cpus list.
So, there must add the "break" to branch of case 0.

Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Haibin Wang <wanghaibin.wang@huawei.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-28 03:30:46 -07:00
Alexander Gordeev e8e249d78e kvm: Use pci_enable_msix_exact() instead of pci_enable_msix()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28 11:13:06 +02:00
Xiao Guangrong a086f6a1eb Revert "KVM: Simplify kvm->tlbs_dirty handling"
This reverts commit 5befdc385d.

Since we will allow flush tlb out of mmu-lock in the later
patch

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-23 17:49:48 -03:00
Marcelo Tosatti 63b5cf04f4 Lazy storage key handling
-------------------------
 Linux does not use the ACC and F bits of the storage key. Newer Linux
 versions also do not use the storage keys for dirty and reference
 tracking. We can optimize the guest handling for those guests for faults
 as well as page-in and page-out by simply not caring about the guest
 visible storage key. We trap guest storage key instruction to enable
 those keys only on demand.
 
 Migration bitmap
 
 Until now s390 never provided a proper dirty bitmap.  Let's provide a
 proper migration bitmap for s390. We also change the user dirty tracking
 to a fault based mechanism. This makes the host completely independent
 from the storage keys. Long term this will allow us to back guest memory
 with large pages.
 
 per-VM device attributes
 ------------------------
 To avoid the introduction of new ioctls, let's provide the
 attribute semanantic also on the VM-"device".
 
 Userspace controlled CMMA
 -------------------------
 The CMMA assist is changed from "always on" to "on if requested" via
 per-VM device attributes. In addition a callback to reset all usage
 states is provided.
 
 Proper guest DAT handling for intercepts
 ----------------------------------------
 While instructions handled by SIE take care of all addressing aspects,
 KVM/s390 currently does not care about guest address translation of
 intercepts. This worked out fine, because
 - the s390 Linux kernel has a 1:1 mapping between kernel virtual<->real
  for all pages up to memory size
 - intercepts happen only for a small amount of cases
 - all of these intercepts happen to be in the kernel text for current
   distros
 
 Of course we need to be better for other intercepts, kernel modules etc.
 We provide the infrastructure and rework all in-kernel intercepts to work
 on logical addresses (paging etc) instead of real ones. The code has
 been running internally for several months now, so it is time for going
 public.
 
 GDB support
 -----------
 We provide breakpoints, single stepping and watchpoints.
 
 Fixes/Cleanups
 --------------
 - Improve program check delivery
 - Factor out the handling of transactional memory  on program checks
 - Use the existing define __LC_PGM_TDB
 - Several cleanups in the lowcore structure
 - Documentation
 
 NOTES
 -----
 - All patches touching base s390 are either ACKed or written by the s390
   maintainers
 - One base KVM patch "KVM: add kvm_is_error_gpa() helper"
 - One patch introduces the notion of VM device attributes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTVlHZAAoJEBF7vIC1phx8REgP/1P0EUzfBpoS53z1v60n2uLT
 lW79LY9Op4/ZacEgHtU9LzmGa88X0arDsIpBZQsTNLF77AGFcMCCV3X2il/lQrRG
 KSE+ycKLoFjCcES442DwF4gHoGldD+KL/+5LPWSQZtvb9dDpHDft9aeMRBbpUL0Q
 M2kKQDlmJ2XqQu3D5PwSHgVRByHiHOzmTe2ejSSbdppkwBpaiqSBBBk0jVYDW9Jh
 eqUnBcrrYW2p+QS37ELM6hOkfDXN/vXoHBQeyca19TuZVCPNA7HeJaPc2mJ/GZk9
 wrNWEmY3f/lY0lk0zMwBwsDOS5K7jbtvXzcex6m+NsIqQuOvKsmPBy1BWb/axcK5
 uZq/JGFC0fxsFU+7ImtvQrJ/DMHnVuvSKF4WUVle2GdMlDIqkguwX27WwHSiH4/r
 Au02KlVIMUZdLAEUrw/W/S4MPLeZYoGfetHGCOmSaP2qGc97BVFedZaqekDlUgMw
 3gIoQmSIBcfrgF4k9N4nLjdhAX2S4gkviwF3pTlIkecNfa7RcI3Xk7U9mVPmIhL4
 IquVqjdXZH4m0e4gViBMtQ0IPwGt1qFlV6Wv3O9MExhfi7VQ8M8TMYNhEvtGpY75
 cuZwZYGM4FqszDAy9hbk0avTLqCxqlTiBKi3tHoQMappQmsJPrIdxIpev3MZPHCp
 vZMkbzhM9l3eefNJVw66
 =jxBp
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-20140422' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into queue

Lazy storage key handling
-------------------------
Linux does not use the ACC and F bits of the storage key. Newer Linux
versions also do not use the storage keys for dirty and reference
tracking. We can optimize the guest handling for those guests for faults
as well as page-in and page-out by simply not caring about the guest
visible storage key. We trap guest storage key instruction to enable
those keys only on demand.

Migration bitmap

Until now s390 never provided a proper dirty bitmap.  Let's provide a
proper migration bitmap for s390. We also change the user dirty tracking
to a fault based mechanism. This makes the host completely independent
from the storage keys. Long term this will allow us to back guest memory
with large pages.

per-VM device attributes
------------------------
To avoid the introduction of new ioctls, let's provide the
attribute semanantic also on the VM-"device".

Userspace controlled CMMA
-------------------------
The CMMA assist is changed from "always on" to "on if requested" via
per-VM device attributes. In addition a callback to reset all usage
states is provided.

Proper guest DAT handling for intercepts
----------------------------------------
While instructions handled by SIE take care of all addressing aspects,
KVM/s390 currently does not care about guest address translation of
intercepts. This worked out fine, because
- the s390 Linux kernel has a 1:1 mapping between kernel virtual<->real
 for all pages up to memory size
- intercepts happen only for a small amount of cases
- all of these intercepts happen to be in the kernel text for current
  distros

Of course we need to be better for other intercepts, kernel modules etc.
We provide the infrastructure and rework all in-kernel intercepts to work
on logical addresses (paging etc) instead of real ones. The code has
been running internally for several months now, so it is time for going
public.

GDB support
-----------
We provide breakpoints, single stepping and watchpoints.

Fixes/Cleanups
--------------
- Improve program check delivery
- Factor out the handling of transactional memory  on program checks
- Use the existing define __LC_PGM_TDB
- Several cleanups in the lowcore structure
- Documentation

NOTES
-----
- All patches touching base s390 are either ACKed or written by the s390
  maintainers
- One base KVM patch "KVM: add kvm_is_error_gpa() helper"
- One patch introduces the notion of VM device attributes

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Conflicts:
	include/uapi/linux/kvm.h
2014-04-22 10:51:06 -03:00
Jason J. Herne 15f36ebd34 KVM: s390: Add proper dirty bitmap support to S390 kvm.
Replace the kvm_s390_sync_dirty_log() stub with code to construct the KVM
dirty_bitmap from S390 memory change bits.  Also add code to properly clear
the dirty_bitmap size when clearing the bitmap.

Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
CC: Dominik Dingel <dingel@linux.vnet.ibm.com>
[Dominik Dingel: use gmap_test_and_clear_dirty, locking fixes]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-04-22 09:36:28 +02:00
Michael S. Tsirkin 68c3b4d167 KVM: VMX: speed up wildcard MMIO EVENTFD
With KVM, MMIO is much slower than PIO, due to the need to
do page walk and emulation. But with EPT, it does not have to be: we
know the address from the VMCS so if the address is unique, we can look
up the eventfd directly, bypassing emulation.

Unfortunately, this only works if userspace does not need to match on
access length and data.  The implementation adds a separate FAST_MMIO
bus internally. This serves two purposes:
    - minimize overhead for old userspace that does not use eventfd with lengtth = 0
    - minimize disruption in other code (since we don't know the length,
      devices on the MMIO bus only get a valid address in write, this
      way we don't need to touch all devices to teach them to handle
      an invalid length)

At the moment, this optimization only has effect for EPT on x86.

It will be possible to speed up MMIO for NPT and MMU using the same
idea in the future.

With this patch applied, on VMX MMIO EVENTFD is essentially as fast as PIO.
I was unable to detect any measureable slowdown to non-eventfd MMIO.

Making MMIO faster is important for the upcoming virtio 1.0 which
includes an MMIO signalling capability.

The idea was suggested by Peter Anvin.  Lots of thanks to Gleb for
pre-review and suggestions.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-17 14:01:43 -03:00
Michael S. Tsirkin f848a5a8dc KVM: support any-length wildcard ioeventfd
It is sometimes benefitial to ignore IO size, and only match on address.
In hindsight this would have been a better default than matching length
when KVM_IOEVENTFD_FLAG_DATAMATCH is not set, In particular, this kind
of access can be optimized on VMX: there no need to do page lookups.
This can currently be done with many ioeventfds but in a suboptimal way.

However we can't change kernel/userspace ABI without risk of breaking
some applications.
Use len = 0 to mean "ignore length for matching" in a more optimal way.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-17 14:01:42 -03:00
Linus Torvalds 55101e2d6c Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Marcelo Tosatti:
 - Fix for guest triggerable BUG_ON (CVE-2014-0155)
 - CR4.SMAP support
 - Spurious WARN_ON() fix

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: remove WARN_ON from get_kernel_ns()
  KVM: Rename variable smep to cr4_smep
  KVM: expose SMAP feature to guest
  KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode
  KVM: Add SMAP support when setting CR4
  KVM: Remove SMAP bit from CR4_RESERVED_BITS
  KVM: ioapic: try to recover if pending_eoi goes out of range
  KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)
2014-04-14 16:21:28 -07:00
Ming Lei 553f809e23 arm, kvm: fix double lock on cpu_add_remove_lock
Commit 8146875de7 (arm, kvm: Fix CPU hotplug callback registration)
holds the lock before calling the two functions:

	kvm_vgic_hyp_init()
	kvm_timer_hyp_init()

and both the two functions are calling register_cpu_notifier()
to register cpu notifier, so cause double lock on cpu_add_remove_lock.

Considered that both two functions are only called inside
kvm_arch_init() with holding cpu_add_remove_lock, so simply use
__register_cpu_notifier() to fix the problem.

Fixes: 8146875de7 (arm, kvm: Fix CPU hotplug callback registration)
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-08 13:15:54 +02:00
Paolo Bonzini 4009b2499e KVM: ioapic: try to recover if pending_eoi goes out of range
The RTC tracking code tracks the cardinality of rtc_status.dest_map
into rtc_status.pending_eoi.  It has some WARN_ONs that trigger if
pending_eoi ever becomes negative; however, these do not do anything
to recover, and it bad things will happen soon after they trigger.

When the next RTC interrupt is triggered, rtc_check_coalesced() will
return false, but ioapic_service will find pending_eoi != 0 and
do a BUG_ON.  To avoid this, should pending_eoi ever be nonzero,
call kvm_rtc_eoi_tracking_restore_all to recompute a correct
dest_map and pending_eoi.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-04 17:17:24 +02:00
Paolo Bonzini 5678de3f15 KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)
QE reported that they got the BUG_ON in ioapic_service to trigger.
I cannot reproduce it, but there are two reasons why this could happen.

The less likely but also easiest one, is when kvm_irq_delivery_to_apic
does not deliver to any APIC and returns -1.

Because irqe.shorthand == 0, the kvm_for_each_vcpu loop in that
function is never reached.  However, you can target the similar loop in
kvm_irq_delivery_to_apic_fast; just program a zero logical destination
address into the IOAPIC, or an out-of-range physical destination address.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-04 17:17:14 +02:00
Linus Torvalds d0cb5f71c5 VFIO updates for v3.15 include:
- Allow the vfio-type1 IOMMU to support multiple domains within a container
 - Plumb path to query whether all domains are cache-coherent
 - Wire query into kvm-vfio device to avoid KVM x86 WBINVD emulation
 - Always select CONFIG_ANON_INODES, vfio depends on it (Arnd)
 
 The first patch also makes the vfio-type1 IOMMU driver completely independent
 of the bus_type of the devices it's handling, which enables it to be used for
 both vfio-pci and a future vfio-platform (and hopefully combinations involving
 both simultaneously).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTPbikAAoJECObm247sIsiG9cP/jnurW84YuAHmybzy3R4nMaa
 8BWcQST+TyQ78GWvubFDcRt+vHmJUI4iFWPBIm1twBSVrMy6F1GcT/spmSne1Dfb
 OvcfGEy59tGO+BeklHg5Qq2Hj1UzfeV9uQoy+PrpTF/sYzsyL6g5+O3Zv39SNvr0
 zCwnO2JAKXIpQlkK3wVha6V13X07Z/+d2b4JSsvmON2cnlPzOUYNrgBvoSeV2IQe
 3kMAU9qfAfQlpNDhRRZL/HshgWazCg4XZUp9UdNjUkOxrUp4vXHrVTUJnUGBDytk
 8V9UGRKF3mik9PqpZJk4jLV5urgUVpnUR5747uqs0KF+9GWxClXvh3gp1XX8Zn7f
 NCfDSMn/wrDr6fQBglKUadITaDhF49KV+J0cX083q46BbYxhAfgxv1I9UOvLreG6
 SGAezlTB0mefa1BmSwJdfKwDBsuDOhbF0TsHC6zT7yFc8pqe3hl/vQzUyu3HtwuM
 yPycQiQQmvOaymaiiBRwyLocwJbDNKPigDomv8NZ8Mcd97Fu9YsF4ydaxMJmmeKf
 TffYS4z4tUElYiU2vv1ipB8T+ReCmdtj2cIvyfwTL9jycY9ouO4bJ56dOGWd3WNl
 m7AVokbrrJQ03itUpFMuYjHAzTNUlXVvXlGr9n6L4VTR0RTL1zwJVrMVDsXdhxm4
 XgDbVB5PrxinDAC1vJvI
 =mnzO
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v3.15-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:
 "VFIO updates for v3.15 include:

   - Allow the vfio-type1 IOMMU to support multiple domains within a
     container
   - Plumb path to query whether all domains are cache-coherent
   - Wire query into kvm-vfio device to avoid KVM x86 WBINVD emulation
   - Always select CONFIG_ANON_INODES, vfio depends on it (Arnd)

  The first patch also makes the vfio-type1 IOMMU driver completely
  independent of the bus_type of the devices it's handling, which
  enables it to be used for both vfio-pci and a future vfio-platform
  (and hopefully combinations involving both simultaneously)"

* tag 'vfio-v3.15-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: always select ANON_INODES
  kvm/vfio: Support for DMA coherent IOMMUs
  vfio: Add external user check extension interface
  vfio/type1: Add extension to test DMA cache coherence of IOMMU
  vfio/iommu_type1: Multi-IOMMU domain support
2014-04-03 14:05:02 -07:00
Linus Torvalds 7cbb39d4d4 Merge tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
 "PPC and ARM do not have much going on this time.  Most of the cool
  stuff, instead, is in s390 and (after a few releases) x86.

  ARM has some caching fixes and PPC has transactional memory support in
  guests.  MIPS has some fixes, with more probably coming in 3.16 as
  QEMU will soon get support for MIPS KVM.

  For x86 there are optimizations for debug registers, which trigger on
  some Windows games, and other important fixes for Windows guests.  We
  now expose to the guest Broadwell instruction set extensions and also
  Intel MPX.  There's also a fix/workaround for OS X guests, nested
  virtualization features (preemption timer), and a couple kvmclock
  refinements.

  For s390, the main news is asynchronous page faults, together with
  improvements to IRQs (floating irqs and adapter irqs) that speed up
  virtio devices"

* tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits)
  KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8
  KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset
  KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode
  KVM: PPC: Book3S HV: Return ENODEV error rather than EIO
  KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code
  KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state
  KVM: PPC: Book3S HV: Add transactional memory support
  KVM: Specify byte order for KVM_EXIT_MMIO
  KVM: vmx: fix MPX detection
  KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n
  KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE
  KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write
  KVM: s390: clear local interrupts at cpu initial reset
  KVM: s390: Fix possible memory leak in SIGP functions
  KVM: s390: fix calculation of idle_mask array size
  KVM: s390: randomize sca address
  KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP
  KVM: Bump KVM_MAX_IRQ_ROUTES for s390
  KVM: s390: irq routing for adapter interrupts.
  KVM: s390: adapter interrupt sources
  ...
2014-04-02 14:50:10 -07:00
Linus Torvalds 176ab02d49 Merge branch 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 LTO changes from Peter Anvin:
 "More infrastructure work in preparation for link-time optimization
  (LTO).  Most of these changes is to make sure symbols accessed from
  assembly code are properly marked as visible so the linker doesn't
  remove them.

  My understanding is that the changes to support LTO are still not
  upstream in binutils, but are on the way there.  This patchset should
  conclude the x86-specific changes, and remaining patches to actually
  enable LTO will be fed through the Kbuild tree (other than keeping up
  with changes to the x86 code base, of course), although not
  necessarily in this merge window"

* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  Kbuild, lto: Handle basic LTO in modpost
  Kbuild, lto: Disable LTO for asm-offsets.c
  Kbuild, lto: Add a gcc-ld script to let run gcc as ld
  Kbuild, lto: add ld-version and ld-ifversion macros
  Kbuild, lto: Drop .number postfixes in modpost
  Kbuild, lto, workaround: Don't warn for initcall_reference in modpost
  lto: Disable LTO for sys_ni
  lto: Handle LTO common symbols in module loader
  lto, workaround: Add workaround for initcall reordering
  lto: Make asmlinkage __visible
  x86, lto: Disable LTO for the x86 VDSO
  initconst, x86: Fix initconst mistake in ts5500 code
  initconst: Fix initconst mistake in dcdbas
  asmlinkage: Make trace_hardirqs_on/off_caller visible
  asmlinkage, x86: Fix 32bit memcpy for LTO
  asmlinkage Make __stack_chk_failed and memcmp visible
  asmlinkage: Mark rwsem functions that can be called from assembler asmlinkage
  asmlinkage: Make main_extable_sort_needed visible
  asmlinkage, mutex: Mark __visible
  asmlinkage: Make trace_hardirq visible
  ...
2014-03-31 14:13:25 -07:00
Paolo Bonzini 673f7b4257 KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP
After the previous patches, an interrupt whose bit is set in the IRR
register will never be in the LAPIC's IRR and has never been injected
on the migration source.  So inject it on the destination.

This fixes migration of Windows guests without HPET (they use the RTC
to trigger the scheduler tick, and lose it after migration).

Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-21 15:10:43 +01:00
Paolo Bonzini 44847dea79 KVM: ioapic: extract body of kvm_ioapic_set_irq
We will reuse it to process a nonzero IRR that is passed to KVM_SET_IRQCHIP.

Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-21 10:20:16 +01:00
Paolo Bonzini 0bc830b05c KVM: ioapic: clear IRR for edge-triggered interrupts at delivery
This ensures that IRR bits are set in the KVM_GET_IRQCHIP result only if
the interrupt is still sitting in the IOAPIC.  After the next patches, it
avoids spurious reinjection of the interrupt when KVM_SET_IRQCHIP is
called.

Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-21 10:20:10 +01:00
Paolo Bonzini 0b10a1c87a KVM: ioapic: merge ioapic_deliver into ioapic_service
Commonize the handling of masking, which was absent for kvm_ioapic_set_irq.
Setting remote_irr does not need a separate function either, and merging
the two functions avoids confusion.

Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-21 10:19:48 +01:00
Cornelia Huck 684a0b719d KVM: eventfd: Fix lock order inversion.
When registering a new irqfd, we call its ->poll method to collect any
event that might have previously been pending so that we can trigger it.
This is done under the kvm->irqfds.lock, which means the eventfd's ctx
lock is taken under it.

However, if we get a POLLHUP in irqfd_wakeup, we will be called with the
ctx lock held before getting the irqfds.lock to deactivate the irqfd,
causing lockdep to complain.

Calling the ->poll method does not really need the irqfds.lock, so let's
just move it after we've given up the irqfds.lock in kvm_irqfd_assign().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-18 17:06:04 +01:00
Gabriel L. Somlo 100943c54e kvm: x86: ignore ioapic polarity
Both QEMU and KVM have already accumulated a significant number of
optimizations based on the hard-coded assumption that ioapic polarity
will always use the ActiveHigh convention, where the logical and
physical states of level-triggered irq lines always match (i.e.,
active(asserted) == high == 1, inactive == low == 0). QEMU guests
are expected to follow directions given via ACPI and configure the
ioapic with polarity 0 (ActiveHigh). However, even when misbehaving
guests (e.g. OS X <= 10.9) set the ioapic polarity to 1 (ActiveLow),
QEMU will still use the ActiveHigh signaling convention when
interfacing with KVM.

This patch modifies KVM to completely ignore ioapic polarity as set by
the guest OS, enabling misbehaving guests to work alongside those which
comply with the ActiveHigh polarity specified by QEMU's ACPI tables.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gabriel L. Somlo <somlo@cmu.edu>
[Move documentation to KVM_IRQ_LINE, add ia64. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-13 11:58:21 +01:00
Alex Williamson 9d830d47c7 kvm/vfio: Support for DMA coherent IOMMUs
VFIO now has support for using the IOMMU_CACHE flag and a mechanism
for an external user to test the current operating mode of the IOMMU.
Add support for this to the kvm-vfio pseudo device so that we only
register noncoherent DMA when necessary.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-26 11:38:40 -07:00
Michael Mueller 98f4a14676 KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop
Use the arch specific function kvm_arch_vcpu_runnable() to add a further
criterium to identify a suitable vcpu to yield to during undirected yield
processing.

Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-26 17:32:05 +01:00
Takuya Yoshikawa 5befdc385d KVM: Simplify kvm->tlbs_dirty handling
When this was introduced, kvm_flush_remote_tlbs() could be called
without holding mmu_lock.  It is now acknowledged that the function
must be called before releasing mmu_lock, and all callers have already
been changed to do so.

There is no need to use smp_mb() and cmpxchg() any more.

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-18 10:07:26 +01:00
Paolo Bonzini f18eb31f9d Merge branch 'kvm-master' into kvm-queue 2014-02-14 11:10:07 +01:00
Christoffer Dall 2a2f3e269c arm64: KVM: Add VGIC device control for arm64
This fixes the build breakage introduced by
c07a0191ef and adds support for the device
control API and save/restore of the VGIC state for ARMv8.

The defines were simply missing from the arm64 header files and
uaccess.h must be implicitly imported from somewhere else on arm.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-14 11:09:49 +01:00
Andi Kleen 52480137d8 asmlinkage, kvm: Make kvm_rebooting visible
kvm_rebooting is referenced from assembler code, thus
needs to be visible.

Cc: Gleb Natapov <gleb@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1391845930-28580-1-git-send-email-ak@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-13 18:11:56 -08:00
Dominik Dingel 1179ba5395 KVM: async_pf: Add missing call for async page present
Commit KVM: async_pf: Provide additional direct page notification
missed the call from kvm_check_async_pf_completion to the new introduced function.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-04 04:24:05 +01:00
Dominik Dingel 9f2ceda49c KVM: async_pf: Allow to wait for outstanding work
On s390 we are not able to cancel work. Instead we will flush the work and wait for
completion.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-30 12:52:20 +01:00
Dominik Dingel e0ead41a6d KVM: async_pf: Provide additional direct page notification
By setting a Kconfig option, the architecture can control when
guest notifications will be presented by the apf backend.
There is the default batch mechanism, working as before, where the vcpu
thread should pull in this information.
Opposite to this, there is now the direct mechanism, that will push the
information to the guest.
This way s390 can use an already existing architecture interface.

Still the vcpu thread should call check_completion to cleanup leftovers.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-30 12:51:38 +01:00
Dan Carpenter aac5c4226e KVM: return an error code in kvm_vm_ioctl_register_coalesced_mmio()
If kvm_io_bus_register_dev() fails then it returns success but it should
return an error code.

I also did a little cleanup like removing an impossible NULL test.

Cc: stable@vger.kernel.org
Fixes: 2b3c246a68 ('KVM: Make coalesced mmio use a device per zone')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-30 11:56:09 +01:00
Jens Freimann c05c4186bb KVM: s390: add floating irq controller
This patch adds a floating irq controller as a kvm_device.
It will be necessary for migration of floating interrupts as well
as for hardening the reset code by allowing user space to explicitly
remove all pending floating interrupts.

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-30 10:25:20 +01:00
Linus Torvalds 7ebd3faa9b First round of KVM updates for 3.14; PPC parts will come next week.
Nothing major here, just bugfixes all over the place.  The most
 interesting part is the ARM guys' virtualized interrupt controller
 overhaul, which lets userspace get/set the state and thus enables
 migration of ARM VMs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3TVKAAoJEBvWZb6bTYbyIFgP/2cmt4ifCuFMaZv4+G1S8jZU
 uC9ZB/+7vzht/p6zAy+4BxurKbHmSBFkC1OKcxYuy7yB4CQkHabzj4V2vRtqFdwH
 5lExP9qh3kqaVLuhnvxLTmkktR3EW4PFy6OI53l5kRNktOXSuZ0aN6K3V7tCg/X0
 iL7ASo4bJKlxeWcDpmuVrNgAajmZVfXrjKY7robgBQno+yIsgKhRZRBQHjozA6B8
 FpCo/k48RZd/EzIbV/PDDRI4hmmry/lgrO9SKjzq56wSqff2bd/k/KYze4dbAPfd
 Ps60enPTuHmeEjjb4MMMU4EKHVdTQFUMx/xZCmT4xzoh8s4of6RHphXbfE0SUznQ
 dTveyEQAR7E3JNS0k1+3WEX5fWlFesp0hO2NeE0wzUq4TAr9ztgVO9NQ6Si15e7Z
 2HysO0T5Ojtt0lY08/PvS6i48eCAuuBomrejJS8hLW4SUZ5adn+yW4Qo7Fp9JeBR
 l9a3LsVT8BZMtUWrUuFcVhlM4MbzElUPjDbgWhR8UYU/kpfVZOQu8qWgGKR4UWXy
 X7/t9l/tjR99CmfMJBAOzJid+ScSpAfg77BdaKiQrVfVIJmsjEjlO8vUMyj5b1HF
 hPX5wNyJjHAOfridLeHSs4Rdm4a8sk8Az5d4h76pLVz8M4jyTi2v0rO3N4/dU/pu
 x7N8KR5hAj+mLBoM9/Al
 =8sYU
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "First round of KVM updates for 3.14; PPC parts will come next week.

  Nothing major here, just bugfixes all over the place.  The most
  interesting part is the ARM guys' virtualized interrupt controller
  overhaul, which lets userspace get/set the state and thus enables
  migration of ARM VMs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits)
  kvm: make KVM_MMU_AUDIT help text more readable
  KVM: s390: Fix memory access error detection
  KVM: nVMX: Update guest activity state field on L2 exits
  KVM: nVMX: Fix nested_run_pending on activity state HLT
  KVM: nVMX: Clean up handling of VMX-related MSRs
  KVM: nVMX: Add tracepoints for nested_vmexit and nested_vmexit_inject
  KVM: nVMX: Pass vmexit parameters to nested_vmx_vmexit
  KVM: nVMX: Leave VMX mode on clearing of feature control MSR
  KVM: VMX: Fix DR6 update on #DB exception
  KVM: SVM: Fix reading of DR6
  KVM: x86: Sync DR7 on KVM_SET_DEBUGREGS
  add support for Hyper-V reference time counter
  KVM: remove useless write to vcpu->hv_clock.tsc_timestamp
  KVM: x86: fix tsc catchup issue with tsc scaling
  KVM: x86: limit PIT timer frequency
  KVM: x86: handle invalid root_hpa everywhere
  kvm: Provide kvm_vcpu_eligible_for_directed_yield() stub
  kvm: vfio: silence GCC warning
  KVM: ARM: Remove duplicate include
  arm/arm64: KVM: relax the requirements of VMA alignment for THP
  ...
2014-01-22 21:40:43 -08:00
Scott Wood 4a55dd7273 kvm: Provide kvm_vcpu_eligible_for_directed_yield() stub
Commit 7940876e13 ("kvm: make local
functions static") broke KVM PPC builds due to removing (rather than
moving) the stub version of kvm_vcpu_eligible_for_directed_yield().

This patch reintroduces it.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Alexander Graf <agraf@suse.de>
[Move the #ifdef inside the function. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-15 12:03:23 +01:00
Paul Bolle e81d1ad327 kvm: vfio: silence GCC warning
Building vfio.o triggers a GCC warning (when building for 32 bits x86):
    arch/x86/kvm/../../../virt/kvm/vfio.c: In function 'kvm_vfio_set_group':
    arch/x86/kvm/../../../virt/kvm/vfio.c:104:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
      void __user *argp = (void __user *)arg;
                          ^

Silence this warning by casting arg to unsigned long.

argp's current type, "void __user *", is always casted to "int32_t
__user *". So its type might as well be changed to "int32_t __user *".

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-15 12:01:48 +01:00
Stephen Hemminger ea0269bc34 kvm: remove dead code
The function kvm_io_bus_read_cookie is defined but never used
in current in-tree code.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-01-08 19:03:00 -02:00
Stephen Hemminger 7940876e13 kvm: make local functions static
Running 'make namespacecheck' found lots of functions that
should be declared static, since only used in one file.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-01-08 19:02:58 -02:00
Christoffer Dall fa20f5aea5 KVM: arm-vgic: Support CPU interface reg access
Implement support for the CPU interface register access driven by MMIO
address offsets from the CPU interface base address.  Useful for user
space to support save/restore of the VGIC state.

This commit adds support only for the same logic as the current VGIC
support, and no more.  For example, the active priority registers are
handled as RAZ/WI, just like setting priorities on the emulated
distributor.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21 10:02:10 -08:00
Christoffer Dall 90a5355ee7 KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers
Handle MMIO accesses to the two registers which should support both the
case where the VMs want to read/write either of these registers and the
case where user space reads/writes these registers to do save/restore of
the VGIC state.

Note that the added complexity compared to simple set/clear enable
registers stems from the bookkeping of source cpu ids.  It may be
possible to change the underlying data structure to simplify the
complexity, but since this is not in the critical path at all, this will
do.

Also note that reading this register from a live guest will not be
accurate compared to on hardware, because some state may be living on
the CPU LRs and the only way to give a consistent read would be to force
stop all the VCPUs and request them to unqueu the LR state onto the
distributor.  Until we have an actual user of live reading this
register, we can live with the difference.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21 10:02:04 -08:00
Christoffer Dall cbd333a4bf KVM: arm-vgic: Support unqueueing of LRs to the dist
To properly access the VGIC state from user space it is very unpractical
to have to loop through all the LRs in all register access functions.
Instead, support moving all pending state from LRs to the distributor,
but leave active state LRs alone.

Note that to accurately present the active and pending state to VCPUs
reading these distributor registers from a live VM, we would have to
stop all other VPUs than the calling VCPU and ask each CPU to unqueue
their LR state onto the distributor and add fields to track active state
on the distributor side as well.  We don't have any users of such
functionality yet and there are other inaccuracies of the GIC emulation,
so don't provide accurate synchronized access to this state just yet.
However, when the time comes, having this function should help.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21 10:01:44 -08:00
Christoffer Dall c07a0191ef KVM: arm-vgic: Add vgic reg access from dev attr
Add infrastructure to handle distributor and cpu interface register
accesses through the KVM_{GET/SET}_DEVICE_ATTR interface by adding the
KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS groups
and defining the semantics of the attr field to be the MMIO offset as
specified in the GICv2 specs.

Missing register accesses or other changes in individual register access
functions to support save/restore of the VGIC state is added in
subsequent patches.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21 10:01:39 -08:00
Christoffer Dall 1006e8cb22 KVM: arm-vgic: Make vgic mmio functions more generic
Rename the vgic_ranges array to vgic_dist_ranges to be more specific and
to prepare for handling CPU interface register access as well (for
save/restore of VGIC state).

Pass offset from distributor or interface MMIO base to
find_matching_range function instead of the physical address of the
access in the VM memory map.  This allows other callers unaware of the
VM specifics, but with generic VGIC knowledge to reuse the function.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21 10:01:31 -08:00
Christoffer Dall ce01e4e887 KVM: arm-vgic: Set base addr through device API
Support setting the distributor and cpu interface base addresses in the
VM physical address space through the KVM_{SET,GET}_DEVICE_ATTR API
in addition to the ARM specific API.

This has the added benefit of being able to share more code in user
space and do things in a uniform manner.

Also deprecate the older API at the same time, but backwards
compatibility will be maintained.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21 10:01:22 -08:00
Christoffer Dall 7330672bef KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC
Support creating the ARM VGIC device through the KVM_CREATE_DEVICE
ioctl, which can then later be leveraged to use the
KVM_{GET/SET}_DEVICE_ATTR, which is useful both for setting addresses in
a more generic API than the ARM-specific one and is useful for
save/restore of VGIC state.

Adds KVM_CAP_DEVICE_CTRL to ARM capabilities.

Note that we change the check for creating a VGIC from bailing out if
any VCPUs were created, to bailing out if any VCPUs were ever run.  This
is an important distinction that shouldn't break anything, but allows
creating the VGIC after the VCPUs have been created.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21 10:01:16 -08:00
Christoffer Dall e1ba0207a1 ARM: KVM: Allow creating the VGIC after VCPUs
Rework the VGIC initialization slightly to allow initialization of the
vgic cpu-specific state even if the irqchip (the VGIC) hasn't been
created by user space yet.  This is safe, because the vgic data
structures are already allocated when the CPU is allocated if VGIC
support is compiled into the kernel.  Further, the init process does not
depend on any other information and the sacrifice is a slight
performance degradation for creating VMs in the no-VGIC case.

The reason is that the new device control API doesn't mandate creating
the VGIC before creating the VCPU and it is unreasonable to require user
space to create the VGIC before creating the VCPUs.

At the same time move the irqchip_in_kernel check out of
kvm_vcpu_first_run_init and into the init function to make the per-vcpu
and global init functions symmetric and add comments on the exported
functions making it a bit easier to understand the init flow by only
looking at vgic.c.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21 10:01:06 -08:00
Andre Przywara 39735a3a39 ARM/KVM: save and restore generic timer registers
For migration to work we need to save (and later restore) the state of
each core's virtual generic timer.
Since this is per VCPU, we can use the [gs]et_one_reg ioctl and export
the three needed registers (control, counter, compare value).
Though they live in cp15 space, we don't use the existing list, since
they need special accessor functions and the arch timer is optional.

Acked-by: Marc Zynger <marc.zyngier@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21 10:00:15 -08:00
Christoffer Dall a1a64387ad arm/arm64: KVM: arch_timer: Initialize cntvoff at kvm_init
Initialize the cntvoff at kvm_init_vm time, not before running the VCPUs
at the first time because that will overwrite any potentially restored
values from user space.

Cc: Andre Przywara <andre.przywara@linaro.org>
Acked-by: Marc Zynger <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21 09:58:57 -08:00
Takuya Yoshikawa c08ac06ab3 KVM: Use cond_resched() directly and remove useless kvm_resched()
Since the commit 15ad7146 ("KVM: Use the scheduler preemption notifiers
to make kvm preemptible"), the remaining stuff in this function is a
simple cond_resched() call with an extra need_resched() check which was
there to avoid dropping VCPUs unnecessarily.  Now it is meaningless.

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-13 14:23:45 +01:00
Andy Honig 338c7dbadd KVM: Improve create VCPU parameter (CVE-2013-4587)
In multiple functions the vcpu_id is used as an offset into a bitfield.  Ag
malicious user could specify a vcpu_id greater than 255 in order to set or
clear bits in kernel memory.  This could be used to elevate priveges in the
kernel.  This patch verifies that the vcpu_id provided is less than 255.
The api documentation already specifies that the vcpu_id must be less than
max_vcpus, but this is currently not checked.

Reported-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-12 22:39:33 +01:00
Heiko Carstens 8a3caa6d74 KVM: kvm_clear_guest_page(): fix empty_zero_page usage
Using the address of 'empty_zero_page' as source address in order to
clear a page is wrong. On some architectures empty_zero_page is only the
pointer to the struct page of the empty_zero_page.  Therefore the clear
page operation would copy the contents of a couple of struct pages instead
of clearing a page.  For kvm only arm/arm64 are affected by this bug.

To fix this use the ZERO_PAGE macro instead which will return the struct
page address of the empty_zero_page on all architectures.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-11-21 11:19:32 +02:00
Linus Torvalds f080480488 Here are the 3.13 KVM changes. There was a lot of work on the PPC
side: the HV and emulation flavors can now coexist in a single kernel
 is probably the most interesting change from a user point of view.
 On the x86 side there are nested virtualization improvements and a
 few bugfixes.  ARM got transparent huge page support, improved
 overcommit, and support for big endian guests.
 
 Finally, there is a new interface to connect KVM with VFIO.  This
 helps with devices that use NoSnoop PCI transactions, letting the
 driver in the guest execute WBINVD instructions.  This includes
 some nVidia cards on Windows, that fail to start without these
 patches and the corresponding userspace changes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJShPAhAAoJEBvWZb6bTYbyl48P/297GgmELHAGBgjvb6q7yyGu
 L8+eHjKbh4XBAkPwyzbvUjuww5z2hM0N3JQ0BDV9oeXlO+zwwCEns/sg2Q5/NJXq
 XxnTeShaKnp9lqVBnE6G9rAOUWKoyLJ2wItlvUL8JlaO9xJ0Vmk0ta4n2Nv5GqDp
 db6UD7vju6rHtIAhNpvvAO51kAOwc01xxRixCVb7KUYOnmO9nvpixzoI/S0Rp1gu
 w/OWMfCosDzBoT+cOe79Yx1OKcpaVW94X6CH1s+ShCw3wcbCL2f13Ka8/E3FIcuq
 vkZaLBxio7vjUAHRjPObw0XBW4InXEbhI1DjzIvm8dmc4VsgmtLQkTCG8fj+jINc
 dlHQUq6Do+1F4zy6WMBUj8tNeP1Z9DsABp98rQwR8+BwHoQpGQBpAxW0TE0ZMngC
 t1caqyvjZ5pPpFUxSrAV+8Kg4AvobXPYOim0vqV7Qea07KhFcBXLCfF7BWdwq/Jc
 0CAOlsLL4mHGIQWZJuVGw0YGP7oATDCyewlBuDObx+szYCoV4fQGZVBEL0KwJx/1
 7lrLN7JWzRyw6xTgJ5VVwgYE1tUY4IFQcHu7/5N+dw8/xg9KWA3f4PeMavIKSf+R
 qteewbtmQsxUnvuQIBHLs8NRWPnBPy+F3Sc2ckeOLIe4pmfTte6shtTXcLDL+LqH
 NTmT/cfmYp2BRkiCfCiS
 =rWNf
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM changes from Paolo Bonzini:
 "Here are the 3.13 KVM changes.  There was a lot of work on the PPC
  side: the HV and emulation flavors can now coexist in a single kernel
  is probably the most interesting change from a user point of view.

  On the x86 side there are nested virtualization improvements and a few
  bugfixes.

  ARM got transparent huge page support, improved overcommit, and
  support for big endian guests.

  Finally, there is a new interface to connect KVM with VFIO.  This
  helps with devices that use NoSnoop PCI transactions, letting the
  driver in the guest execute WBINVD instructions.  This includes some
  nVidia cards on Windows, that fail to start without these patches and
  the corresponding userspace changes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
  kvm, vmx: Fix lazy FPU on nested guest
  arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu
  arm/arm64: KVM: MMIO support for BE guest
  kvm, cpuid: Fix sparse warning
  kvm: Delete prototype for non-existent function kvm_check_iopl
  kvm: Delete prototype for non-existent function complete_pio
  hung_task: add method to reset detector
  pvclock: detect watchdog reset at pvclock read
  kvm: optimize out smp_mb after srcu_read_unlock
  srcu: API for barrier after srcu read unlock
  KVM: remove vm mmap method
  KVM: IOMMU: hva align mapping page size
  KVM: x86: trace cpuid emulation when called from emulator
  KVM: emulator: cleanup decode_register_operand() a bit
  KVM: emulator: check rex prefix inside decode_register()
  KVM: x86: fix emulation of "movzbl %bpl, %eax"
  kvm_host: typo fix
  KVM: x86: emulate SAHF instruction
  MAINTAINERS: add tree for kvm.git
  Documentation/kvm: add a 00-INDEX file
  ...
2013-11-15 13:51:36 +09:00
Gleb Natapov 80f5b5e700 KVM: remove vm mmap method
It was used in conjunction with KVM_SET_MEMORY_REGION ioctl which was
removed by b74a07beed in 2010, QEMU stopped using it in 2008, so
it is time to remove the code finally.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-11-06 09:28:47 +02:00
Greg Edwards 27ef63c7e9 KVM: IOMMU: hva align mapping page size
When determining the page size we could use to map with the IOMMU, the
page size should also be aligned with the hva, not just the gfn.  The
gfn may not reflect the real alignment within the hugetlbfs file.

Most of the time, this works fine.  However, if the hugetlbfs file is
backed by non-contiguous huge pages, a multi-huge page memslot starts at
an unaligned offset within the hugetlbfs file, and the gfn is aligned
with respect to the huge page size, kvm_host_page_size() will return the
huge page size and we will use that to map with the IOMMU.

When we later unpin that same memslot, the IOMMU returns the unmap size
as the huge page size, and we happily unpin that many pfns in
monotonically increasing order, not realizing we are spanning
non-contiguous huge pages and partially unpin the wrong huge page.

Ensure the IOMMU mapping page size is aligned with the hva corresponding
to the gfn, which does reflect the alignment within the hugetlbfs file.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Cc: stable@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-11-05 09:55:36 +02:00
Gleb Natapov 95f328d3ad Merge branch 'kvm-ppc-queue' of git://github.com/agraf/linux-2.6 into queue
Conflicts:
	arch/powerpc/include/asm/processor.h
2013-11-04 10:20:57 +02:00
Alex Williamson e0f0bbc527 kvm: Create non-coherent DMA registeration
We currently use some ad-hoc arch variables tied to legacy KVM device
assignment to manage emulation of instructions that depend on whether
non-coherent DMA is present.  Create an interface for this, adapting
legacy KVM device assignment and adding VFIO via the KVM-VFIO device.
For now we assume that non-coherent DMA is possible any time we have a
VFIO group.  Eventually an interface can be developed as part of the
VFIO external user interface to query the coherency of a group.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-30 19:02:23 +01:00
Alex Williamson d96eb2c6f4 kvm/x86: Convert iommu_flags to iommu_noncoherent
Default to operating in coherent mode.  This simplifies the logic when
we switch to a model of registering and unregistering noncoherent I/O
with KVM.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-30 19:02:13 +01:00
Alex Williamson ec53500fae kvm: Add VFIO device
So far we've succeeded at making KVM and VFIO mostly unaware of each
other, but areas are cropping up where a connection beyond eventfds
and irqfds needs to be made.  This patch introduces a KVM-VFIO device
that is meant to be a gateway for such interaction.  The user creates
the device and can add and remove VFIO groups to it via file
descriptors.  When a group is added, KVM verifies the group is valid
and gets a reference to it via the VFIO external user interface.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-30 19:02:03 +01:00
Paolo Bonzini 0c8eb04a62 KVM: use a more sensible error number when debugfs directory creation fails
I don't know if this was due to cut and paste, or somebody was really
using a D20 to pick the error code for kvm_init_debugfs as suggested by
Linus (EFAULT is 14, so the possibility cannot be entirely ruled out).

In any case, this patch fixes it.

Reported-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-30 12:15:34 +01:00
Yang Zhang e0230e1327 KVM: Mapping IOMMU pages after updating memslot
In kvm_iommu_map_pages(), we need to know the page size via call
kvm_host_page_size(). And it will check whether the target slot
is valid before return the right page size.
Currently, we will map the iommu pages when creating a new slot.
But we call kvm_iommu_map_pages() during preparing the new slot.
At that time, the new slot is not visible by domain(still in preparing).
So we cannot get the right page size from kvm_host_page_size() and
this will break the IOMMU super page logic.
The solution is to map the iommu pages after we insert the new slot
into domain.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Tested-by: Patrick Lu <patrick.lu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-28 13:15:01 +01:00
Gleb Natapov 13acfd5715 Powerpc KVM work is based on a commit after rc4.
Merging master into next to satisfy the dependencies.

Conflicts:
	arch/arm/kvm/reset.c
2013-10-17 17:41:49 +03:00
Aneesh Kumar K.V 5587027ce9 kvm: Add struct kvm arg to memslot APIs
We will use that in the later patch to find the kvm ops handler

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-17 15:49:23 +02:00
Aneesh Kumar K.V 2ba9f0d887 kvm: powerpc: book3s: Support building HV and PR KVM as module
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[agraf: squash in compile fix]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-17 15:45:35 +02:00
chai wen f2e106692d KVM: Drop FOLL_GET in GUP when doing async page fault
Page pinning is not mandatory in kvm async page fault processing since
after async page fault event is delivered to a guest it accesses page once
again and does its own GUP.  Drop the FOLL_GET flag in GUP in async_pf
code, and do some simplifying in check/clear processing.

Suggested-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Gu zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: chai wen <chaiw.fnst@cn.fujitsu.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-10-15 13:43:37 +03:00
Andre Richter 29242cb5c6 virt/kvm/iommu.c: Add leading zeros to device's BDF notation in debug messages
When KVM (de)assigns PCI(e) devices to VMs, a debug message is printed
including the BDF notation of the respective device. Currently, the BDF
notation does not have the commonly used leading zeros. This produces
messages like "assign device 0:1:8.0", which look strange at first sight.

The patch fixes this by exchanging the printk(KERN_DEBUG ...) with dev_info()
and also inserts "kvm" into the debug message, so that it is obvious where
the message comes from. Also reduces LoC.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Andre Richter <andre.o.richter@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-10-03 11:47:02 +03:00
Gleb Natapov a2ac07fe29 Fix NULL dereference in gfn_to_hva_prot()
gfn_to_memslot() can return NULL or invalid slot. We need to check slot
validity before accessing it.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-10-03 10:08:52 +03:00
Paolo Bonzini 2f303b74a6 KVM: Convert kvm_lock back to non-raw spinlock
In commit e935b8372c ("KVM: Convert kvm_lock to raw_spinlock"),
the kvm_lock was made a raw lock.  However, the kvm mmu_shrink()
function tries to grab the (non-raw) mmu_lock within the scope of
the raw locked kvm_lock being held.  This leads to the following:

BUG: sleeping function called from invalid context at kernel/rtmutex.c:659
in_atomic(): 1, irqs_disabled(): 0, pid: 55, name: kswapd0
Preemption disabled at:[<ffffffffa0376eac>] mmu_shrink+0x5c/0x1b0 [kvm]

Pid: 55, comm: kswapd0 Not tainted 3.4.34_preempt-rt
Call Trace:
 [<ffffffff8106f2ad>] __might_sleep+0xfd/0x160
 [<ffffffff817d8d64>] rt_spin_lock+0x24/0x50
 [<ffffffffa0376f3c>] mmu_shrink+0xec/0x1b0 [kvm]
 [<ffffffff8111455d>] shrink_slab+0x17d/0x3a0
 [<ffffffff81151f00>] ? mem_cgroup_iter+0x130/0x260
 [<ffffffff8111824a>] balance_pgdat+0x54a/0x730
 [<ffffffff8111fe47>] ? set_pgdat_percpu_threshold+0xa7/0xd0
 [<ffffffff811185bf>] kswapd+0x18f/0x490
 [<ffffffff81070961>] ? get_parent_ip+0x11/0x50
 [<ffffffff81061970>] ? __init_waitqueue_head+0x50/0x50
 [<ffffffff81118430>] ? balance_pgdat+0x730/0x730
 [<ffffffff81060d2b>] kthread+0xdb/0xe0
 [<ffffffff8106e122>] ? finish_task_switch+0x52/0x100
 [<ffffffff817e1e94>] kernel_thread_helper+0x4/0x10
 [<ffffffff81060c50>] ? __init_kthread_worker+0x

After the previous patch, kvm_lock need not be a raw spinlock anymore,
so change it back.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: kvm@vger.kernel.org
Cc: gleb@redhat.com
Cc: jan.kiszka@siemens.com
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-30 09:21:51 +02:00
Paolo Bonzini 4a937f96f3 KVM: protect kvm_usage_count with its own spinlock
The VM list need not be protected by a raw spinlock.  Separate the
two so that kvm_lock can be made non-raw.

Cc: kvm@vger.kernel.org
Cc: gleb@redhat.com
Cc: jan.kiszka@siemens.com
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-30 09:21:46 +02:00
Paolo Bonzini 4fa92fb25a KVM: cleanup (physical) CPU hotplug
Remove the useless argument, and do not do anything if there are no
VMs running at the time of the hotplug.

Cc: kvm@vger.kernel.org
Cc: gleb@redhat.com
Cc: jan.kiszka@siemens.com
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-30 09:21:30 +02:00
Radim Krčmář 98fda16929 kvm: remove .done from struct kvm_async_pf
'.done' is used to mark the completion of 'async_pf_execute()', but
'cancel_work_sync()' returns true when the work was canceled, so we
use it instead.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-24 19:12:12 +02:00
Radim Krčmář 28b441e240 kvm: free resources after canceling async_pf
When we cancel 'async_pf_execute()', we should behave as if the work was
never scheduled in 'kvm_setup_async_pf()'.
Fixes a bug when we can't unload module because the vm wasn't destroyed.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-17 12:53:15 +03:00
Paolo Bonzini ba6a354154 KVM: mmu: allow page tables to be in read-only slots
Page tables in a read-only memory slot will currently cause a triple
fault because the page walker uses gfn_to_hva and it fails on such a slot.

OVMF uses such a page table; however, real hardware seems to be fine with
that as long as the accessed/dirty bits are set.  Save whether the slot
is readonly, and later check it when updating the accessed and dirty bits.

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-17 12:52:31 +03:00
Linus Torvalds 45d9a2220f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile 1 from Al Viro:
 "Unfortunately, this merge window it'll have a be a lot of small piles -
  my fault, actually, for not keeping #for-next in anything that would
  resemble a sane shape ;-/

  This pile: assorted fixes (the first 3 are -stable fodder, IMO) and
  cleanups + %pd/%pD formats (dentry/file pathname, up to 4 last
  components) + several long-standing patches from various folks.

  There definitely will be a lot more (starting with Miklos'
  check_submount_and_drop() series)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
  direct-io: Handle O_(D)SYNC AIO
  direct-io: Implement generic deferred AIO completions
  add formats for dentry/file pathnames
  kvm eventfd: switch to fdget
  powerpc kvm: use fdget
  switch fchmod() to fdget
  switch epoll_ctl() to fdget
  switch copy_module_from_fd() to fdget
  git simplify nilfs check for busy subtree
  ibmasmfs: don't bother passing superblock when not needed
  don't pass superblock to hypfs_{mkdir,create*}
  don't pass superblock to hypfs_diag_create_files
  don't pass superblock to hypfs_vm_create_files()
  oprofile: get rid of pointless forward declarations of struct super_block
  oprofilefs_create_...() do not need superblock argument
  oprofilefs_mkdir() doesn't need superblock argument
  don't bother with passing superblock to oprofile_create_stats_files()
  oprofile: don't bother with passing superblock to ->create_files()
  don't bother passing sb to oprofile_create_files()
  coh901318: don't open-code simple_read_from_buffer()
  ...
2013-09-05 08:50:26 -07:00
Al Viro cffe78d92c kvm eventfd: switch to fdget
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-03 23:04:45 -04:00
Christoffer Dall 8d98915b6b ARM: KVM: Bugfix: vgic_bytemap_get_reg per cpu regs
For bytemaps each IRQ field is 1 byte wide, so we pack 4 irq fields in
one word and since there are 32 private (per cpu) irqs, we have 8
private u32 fields on the vgic_bytemap struct.  We shift the offset from
the base of the register group right by 2, giving us the word index
instead of the field index.  But then there are 8 private words, not 4,
which is also why we subtract 8 words from the offset of the shared
words.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-30 16:12:38 +03:00
Marc Zyngier 6545eae3d7 ARM: KVM: vgic: fix GICD_ICFGRn access
All the code in handle_mmio_cfg_reg() assumes the offset has
been shifted right to accomodate for the 2:1 bit compression,
but this is only done when getting the register address.

Shift the offset early so the code works mostly unchanged.

Reported-by: Zhaobo (Bob, ERC) <zhaobo@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-30 16:12:16 +03:00
Marc Zyngier 986af8e078 ARM: KVM: vgic: simplify vgic_get_target_reg
vgic_get_target_reg is quite complicated, for no good reason.
Actually, it is fairly easy to write it in a much more efficient
way by using the target CPU array instead of the bitmap.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-30 16:03:07 +03:00
Paolo Bonzini c21fbff16b KVM: rename __kvm_io_bus_sort_cmp to kvm_io_bus_cmp
This is the type-safe comparison function, so the double-underscore is
not related.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-28 09:39:40 +03:00
Andrea Arcangeli 11feeb4980 kvm: optimize away THP checks in kvm_is_mmio_pfn()
The checks on PG_reserved in the page structure on head and tail pages
aren't necessary because split_huge_page wouldn't transfer the
PG_reserved bit from head to tail anyway.

This was a forward-thinking check done in the case PageReserved was
set by a driver-owned page mapped in userland with something like
remap_pfn_range in a VM_PFNMAP region, but using hugepmds (not
possible right now). It was meant to be very safe, but it's overkill
as it's unlikely split_huge_page could ever run without the driver
noticing and tearing down the hugepage itself.

And if a driver in the future will really want to map a reserved
hugepage in userland using an huge pmd it should simply take care of
marking all subpages reserved too to keep KVM safe. This of course
would require such a hypothetical driver to tear down the huge pmd
itself and splitting the hugepage itself, instead of relaying on
split_huge_page, but that sounds very reasonable, especially
considering split_huge_page wouldn't currently transfer the reserved
bit anyway.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-27 11:01:10 +03:00
Yann Droneaud 24009b0549 kvm: use anon_inode_getfd() with O_CLOEXEC flag
KVM uses anon_inode_get() to allocate file descriptors as part
of some of its ioctls. But those ioctls are lacking a flag argument
allowing userspace to choose options for the newly opened file descriptor.

In such case it's advised to use O_CLOEXEC by default so that
userspace is allowed to choose, without race, if the file descriptor
is going to be inherited across exec().

This patch set O_CLOEXEC flag on all file descriptors created
with anon_inode_getfd() to not leak file descriptors across exec().

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1377372576.git.ydroneaud@opteya.com
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-26 13:19:35 +03:00
Paolo Bonzini a343c9b767 KVM: introduce __kvm_io_bus_sort_cmp
kvm_io_bus_sort_cmp is used also directly, not just as a callback for
sort and bsearch.  In these cases, it is handy to have a type-safe
variant.  This patch introduces such a variant, __kvm_io_bus_sort_cmp,
and uses it throughout kvm_main.c.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-29 09:01:14 +02:00
Takuya Yoshikawa e59dbe09f8 KVM: Introduce kvm_arch_memslots_updated()
This is called right after the memslots is updated, i.e. when the result
of update_memslots() gets installed in install_new_memslots().  Since
the memslots needs to be updated twice when we delete or move a memslot,
kvm_arch_commit_memory_region() does not correspond to this exactly.

In the following patch, x86 will use this new API to check if the mmio
generation has reached its maximum value, in which case mmio sptes need
to be flushed out.

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-18 12:29:25 +02:00
Cornelia Huck 126a5af520 KVM: kvm-io: support cookies
Add new functions kvm_io_bus_{read,write}_cookie() that allows users of
the kvm io infrastructure to use a cookie value to speed up lookup of a
device on an io bus.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-07-18 12:29:23 +02:00
Linus Torvalds fe489bf450 KVM fixes for 3.11
On the x86 side, there are some optimizations and documentation updates.
 The big ARM/KVM change for 3.11, support for AArch64, will come through
 Catalin Marinas's tree.  s390 and PPC have misc cleanups and bugfixes.
 
 There is a conflict due to "s390/pgtable: fix ipte notify bit" having
 entered 3.10 through Martin Schwidefsky's s390 tree.  This pull request
 has additional changes on top, so this tree's version is the correct one.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0oU6AAoJEBvWZb6bTYbynnsP/RSUrrHrA8Wu1tqVfAKu+1y5
 6OIihqZ9x11/YMaNofAfv86jqxFu0/j7CzMGphNdjzujqKI+Q1tGe7oiVCmKzoG+
 UvSctWsz0lpllgBtnnrm5tcfmG6rrddhLtpA7m320+xCVx8KV5P4VfyHZEU+Ho8h
 ziPmb2mAQ65gBNX6nLHEJ3ITTgad6gt4NNbrKIYpyXuWZQJypzaRqT/vpc4md+Ed
 dCebMXsL1xgyb98EcnOdrWH1wV30MfucR7IpObOhXnnMKeeltqAQPvaOlKzZh4dK
 +QfxJfdRZVS0cepcxzx1Q2X3dgjoKQsHq1nlIyz3qu1vhtfaqBlixLZk0SguZ/R9
 1S1YqucZiLRO57RD4q0Ak5oxwobu18ZoqJZ6nledNdWwDe8bz/W2wGAeVty19ky0
 qstBdM9jnwXrc0qrVgZp3+s5dsx3NAm/KKZBoq4sXiDLd/yBzdEdWIVkIrU3X9wU
 3X26wOmBxtsB7so/JR7ciTsQHelmLicnVeXohAEP9CjIJffB81xVXnXs0P0SYuiQ
 RzbSCwjPzET4JBOaHWT0Dhv0DTS/EaI97KzlN32US3Bn3WiLlS1oDCoPFoaLqd2K
 LxQMsXS8anAWxFvexfSuUpbJGPnKSidSQoQmJeMGBa9QhmZCht3IL16/Fb641ToN
 xBohzi49L9FDbpOnTYfz
 =1zpG
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "On the x86 side, there are some optimizations and documentation
  updates.  The big ARM/KVM change for 3.11, support for AArch64, will
  come through Catalin Marinas's tree.  s390 and PPC have misc cleanups
  and bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (87 commits)
  KVM: PPC: Ignore PIR writes
  KVM: PPC: Book3S PR: Invalidate SLB entries properly
  KVM: PPC: Book3S PR: Allow guest to use 1TB segments
  KVM: PPC: Book3S PR: Don't keep scanning HPTEG after we find a match
  KVM: PPC: Book3S PR: Fix invalidation of SLB entry 0 on guest entry
  KVM: PPC: Book3S PR: Fix proto-VSID calculations
  KVM: PPC: Guard doorbell exception with CONFIG_PPC_DOORBELL
  KVM: Fix RTC interrupt coalescing tracking
  kvm: Add a tracepoint write_tsc_offset
  KVM: MMU: Inform users of mmio generation wraparound
  KVM: MMU: document fast invalidate all mmio sptes
  KVM: MMU: document fast invalidate all pages
  KVM: MMU: document fast page fault
  KVM: MMU: document mmio page fault
  KVM: MMU: document write_flooding_count
  KVM: MMU: document clear_spte_count
  KVM: MMU: drop kvm_mmu_zap_mmio_sptes
  KVM: MMU: init kvm generation close to mmio wrap-around value
  KVM: MMU: add tracepoint for check_mmio_spte
  KVM: MMU: fast invalidate all mmio sptes
  ...
2013-07-03 13:21:40 -07:00
Gleb Natapov 96f7edf9a5 Merge git://git.linaro.org/people/cdall/linux-kvm-arm.git tags/kvm-arm-3.11 into queue
KVM/ARM pull request for 3.11 merge window

* tag 'kvm-arm-3.11' of git://git.linaro.org/people/cdall/linux-kvm-arm.git:
  ARM: kvm: don't include drivers/virtio/Kconfig
  Update MAINTAINERS: KVM/ARM work now funded by Linaro
  arm/kvm: Cleanup KVM_ARM_MAX_VCPUS logic
  ARM: KVM: clear exclusive monitor on all exception returns
  ARM: KVM: add missing dsb before invalidating Stage-2 TLBs
  ARM: KVM: perform save/restore of PAR
  ARM: KVM: get rid of S2_PGD_SIZE
  ARM: KVM: don't special case PC when doing an MMIO
  ARM: KVM: use phys_addr_t instead of unsigned long long for HYP PGDs
  ARM: KVM: remove dead prototype for __kvm_tlb_flush_vmid
  ARM: KVM: Don't handle PSCI calls via SMC
  ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq
2013-06-27 14:20:54 +03:00
Gleb Natapov 24f7bb52e9 KVM: Fix RTC interrupt coalescing tracking
This reverts most of the f1ed0450a5. After
the commit kvm_apic_set_irq() no longer returns accurate information
about interrupt injection status if injection is done into disabled
APIC. RTC interrupt coalescing tracking relies on the information to be
accurate and cannot recover if it is not.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-27 14:20:53 +03:00
Anup Patel 5ae7f87a56 ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq
The arch_timer irq numbers (or PPI numbers) are implementation dependent,
so the host virtual timer irq number can be different from guest virtual
timer irq number.

This patch ensures that host virtual timer irq number is read from DTB and
guest virtual timer irq is determined based on vcpu target type.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-06-26 10:50:02 -07:00
Amos Kong 6ea34c9b78 kvm: exclude ioeventfd from counting kvm_io_range limit
We can easily reach the 1000 limit by start VM with a couple
hundred I/O devices (multifunction=on). The hardcode limit
already been adjusted 3 times (6 ~ 200 ~ 300 ~ 1000).

In userspace, we already have maximum file descriptor to
limit ioeventfd count. But kvm_io_bus devices also are used
for pit, pic, ioapic, coalesced_mmio. They couldn't be limited
by maximum file descriptor.

Currently only ioeventfds take too much kvm_io_bus devices,
so just exclude it from counting kvm_io_range limit.

Also fixed one indent issue in kvm_host.h

Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-04 11:49:38 +03:00
Marc Zyngier 7275acdfe2 ARM: KVM: move GIC/timer code to a common location
As KVM/arm64 is looming on the horizon, it makes sense to move some
of the common code to a single location in order to reduce duplication.

The code could live anywhere. Actually, most of KVM is already built
with a bunch of ugly ../../.. hacks in the various Makefiles, so we're
not exactly talking about style here. But maybe it is time to start
moving into a less ugly direction.

The include files must be in a "public" location, as they are accessed
from non-KVM files (arch/arm/kernel/asm-offsets.c).

For this purpose, introduce two new locations:
- virt/kvm/arm/ : x86 and ia64 already share the ioapic code in
  virt/kvm, so this could be seen as a (very ugly) precedent.
- include/kvm/  : there is already an include/xen, and while the
  intent is slightly different, this seems as good a location as
  any

Eventually, we should probably have independant Makefiles at every
levels (just like everywhere else in the kernel), but this is just
the first step.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-19 15:13:08 +03:00
Jan Kiszka f1ed0450a5 KVM: x86: Remove support for reporting coalesced APIC IRQs
Since the arrival of posted interrupt support we can no longer guarantee
that coalesced IRQs are always reported to the IRQ source. Moreover,
accumulated APIC timer events could cause a busy loop when a VCPU should
rather be halted. The consensus is to remove coalesced tracking from the
LAPIC.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-14 12:09:02 +03:00
Wei Yongjun afc2f792cd KVM: add missing misc_deregister() on error in kvm_init()
Add the missing misc_deregister() before return from kvm_init()
in the debugfs init error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-12 12:06:24 +03:00
Linus Torvalds c67723ebbb Merge tag 'kvm-3.10-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Gleb Natapov:
 "Most of the fixes are in the emulator since now we emulate more than
  we did before for correctness sake we see more bugs there, but there
  is also an OOPS fixed and corruption of xcr0 register."

* tag 'kvm-3.10-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: emulator: emulate SALC
  KVM: emulator: emulate XLAT
  KVM: emulator: emulate AAM
  KVM: VMX: fix halt emulation while emulating invalid guest sate
  KVM: Fix kvm_irqfd_init initialization
  KVM: x86: fix maintenance of guest/host xcr0 state
2013-05-10 09:08:21 -07:00
Linus Torvalds daf799cca8 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:

 - More work on DT support for various platforms

 - Various fixes that were to late to make it straight into 3.9

 - Improved platform support, in particular the Netlogic XLR and
   BCM63xx, and the SEAD3 and Malta eval boards.

 - Support for several Ralink SOC families.

 - Complete support for the microMIPS ASE which basically reencodes the
   existing MIPS32/MIPS64 ISA to use non-constant size instructions.

 - Some fallout from LTO work which remove old cruft and will generally
   make the MIPS kernel easier to maintain and resistant to compiler
   optimization, even in absence of LTO.

 - KVM support.  While MIPS has announced hardware virtualization
   extensions this KVM extension uses trap and emulate mode for
   virtualization of MIPS32.  More KVM work to add support for VZ
   hardware virtualizaiton extensions and MIPS64 will probably already
   be merged for 3.11.

Most of this has been sitting in -next for a long time.  All defconfigs
have been build or run time tested except three for which fixes are being
sent by other maintainers.

Semantic conflict with kvm updates done as per Ralf

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits)
  MIPS: Add new GIC clockevent driver.
  MIPS: Formatting clean-ups for clocksources.
  MIPS: Refactor GIC clocksource code.
  MIPS: Move 'gic_frequency' to common location.
  MIPS: Move 'gic_present' to common location.
  MIPS: MIPS16e: Add unaligned access support.
  MIPS: MIPS16e: Support handling of delay slots.
  MIPS: MIPS16e: Add instruction formats.
  MIPS: microMIPS: Optimise 'strnlen' core library function.
  MIPS: microMIPS: Optimise 'strlen' core library function.
  MIPS: microMIPS: Optimise 'strncpy' core library function.
  MIPS: microMIPS: Optimise 'memset' core library function.
  MIPS: microMIPS: Add configuration option for microMIPS kernel.
  MIPS: microMIPS: Disable LL/SC and fix linker bug.
  MIPS: microMIPS: Add vdso support.
  MIPS: microMIPS: Add unaligned access support.
  MIPS: microMIPS: Support handling of delay slots.
  MIPS: microMIPS: Add support for exception handling.
  MIPS: microMIPS: Floating point support.
  MIPS: microMIPS: Fix macro naming in micro-assembler.
  ...
2013-05-10 07:48:05 -07:00
Ralf Baechle 5e0e61dd2c Merge branch 'next/kvm' into mips-for-linux-next 2013-05-09 17:56:40 +02:00
Sanjay Lal 2f4d9b5442 KVM/MIPS32: Do not call vcpu_load when injecting interrupts.
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-09 17:48:22 +02:00
Asias He 7dac16c379 KVM: Fix kvm_irqfd_init initialization
In commit a0f155e96 'KVM: Initialize irqfd from kvm_init()', when
kvm_init() is called the second time (e.g kvm-amd.ko and kvm-intel.ko),
kvm_arch_init() will fail with -EEXIST, then kvm_irqfd_exit() will be
called on the error handling path. This way, the kvm_irqfd system will
not be ready.

This patch fix the following:

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff81c0721e>] _raw_spin_lock+0xe/0x30
PGD 0
Oops: 0002 [#1] SMP
Modules linked in: vhost_net
CPU 6
Pid: 4257, comm: qemu-system-x86 Not tainted 3.9.0-rc3+ #757 Dell Inc. OptiPlex 790/0V5HMK
RIP: 0010:[<ffffffff81c0721e>]  [<ffffffff81c0721e>] _raw_spin_lock+0xe/0x30
RSP: 0018:ffff880221721cc8  EFLAGS: 00010046
RAX: 0000000000000100 RBX: ffff88022dcc003f RCX: ffff880221734950
RDX: ffff8802208f6ca8 RSI: 000000007fffffff RDI: 0000000000000000
RBP: ffff880221721cc8 R08: 0000000000000002 R09: 0000000000000002
R10: 00007f7fd01087e0 R11: 0000000000000246 R12: ffff8802208f6ca8
R13: 0000000000000080 R14: ffff880223e2a900 R15: 0000000000000000
FS:  00007f7fd38488e0(0000) GS:ffff88022dcc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000022309f000 CR4: 00000000000427e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process qemu-system-x86 (pid: 4257, threadinfo ffff880221720000, task ffff880222bd5640)
Stack:
 ffff880221721d08 ffffffff810ac5c5 ffff88022431dc00 0000000000000086
 0000000000000080 ffff880223e2a900 ffff8802208f6ca8 0000000000000000
 ffff880221721d48 ffffffff810ac8fe 0000000000000000 ffff880221734000
Call Trace:
 [<ffffffff810ac5c5>] __queue_work+0x45/0x2d0
 [<ffffffff810ac8fe>] queue_work_on+0x8e/0xa0
 [<ffffffff810ac949>] queue_work+0x19/0x20
 [<ffffffff81009b6b>] irqfd_deactivate+0x4b/0x60
 [<ffffffff8100a69d>] kvm_irqfd+0x39d/0x580
 [<ffffffff81007a27>] kvm_vm_ioctl+0x207/0x5b0
 [<ffffffff810c9545>] ? update_curr+0xf5/0x180
 [<ffffffff811b66e8>] do_vfs_ioctl+0x98/0x550
 [<ffffffff810c1f5e>] ? finish_task_switch+0x4e/0xe0
 [<ffffffff81c054aa>] ? __schedule+0x2ea/0x710
 [<ffffffff811b6bf7>] sys_ioctl+0x57/0x90
 [<ffffffff8140ae9e>] ? trace_hardirqs_on_thunk+0x3a/0x3c
 [<ffffffff81c0f602>] system_call_fastpath+0x16/0x1b
Code: c1 ea 08 38 c2 74 0f 66 0f 1f 44 00 00 f3 90 0f b6 03 38 c2 75 f7 48 83 c4 08 5b c9 c3 55 48 89 e5 66 66 66 66 90 b8 00 01 00 00 <f0> 66 0f c1 07 89 c2 66 c1 ea 08 38 c2 74 0c 0f 1f 00 f3 90 0f
RIP  [<ffffffff81c0721e>] _raw_spin_lock+0xe/0x30
RSP <ffff880221721cc8>
CR2: 0000000000000000
---[ end trace 13fb1e4b6e5ab21f ]---

Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-08 13:15:35 +03:00
Linus Torvalds 01227a889e Merge tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Gleb Natapov:
 "Highlights of the updates are:

  general:
   - new emulated device API
   - legacy device assignment is now optional
   - irqfd interface is more generic and can be shared between arches

  x86:
   - VMCS shadow support and other nested VMX improvements
   - APIC virtualization and Posted Interrupt hardware support
   - Optimize mmio spte zapping

  ppc:
    - BookE: in-kernel MPIC emulation with irqfd support
    - Book3S: in-kernel XICS emulation (incomplete)
    - Book3S: HV: migration fixes
    - BookE: more debug support preparation
    - BookE: e6500 support

  ARM:
   - reworking of Hyp idmaps

  s390:
   - ioeventfd for virtio-ccw

  And many other bug fixes, cleanups and improvements"

* tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
  kvm: Add compat_ioctl for device control API
  KVM: x86: Account for failing enable_irq_window for NMI window request
  KVM: PPC: Book3S: Add API for in-kernel XICS emulation
  kvm/ppc/mpic: fix missing unlock in set_base_addr()
  kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write
  kvm/ppc/mpic: remove users
  kvm/ppc/mpic: fix mmio region lists when multiple guests used
  kvm/ppc/mpic: remove default routes from documentation
  kvm: KVM_CAP_IOMMU only available with device assignment
  ARM: KVM: iterate over all CPUs for CPU compatibility check
  KVM: ARM: Fix spelling in error message
  ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally
  KVM: ARM: Fix API documentation for ONE_REG encoding
  ARM: KVM: promote vfp_host pointer to generic host cpu context
  ARM: KVM: add architecture specific hook for capabilities
  ARM: KVM: perform HYP initilization for hotplugged CPUs
  ARM: KVM: switch to a dual-step HYP init code
  ARM: KVM: rework HYP page table freeing
  ARM: KVM: enforce maximum size for identity mapped code
  ARM: KVM: move to a KVM provided HYP idmap
  ...
2013-05-05 14:47:31 -07:00
Scott Wood db6ae61581 kvm: Add compat_ioctl for device control API
This API shouldn't have 32/64-bit issues, but VFS assumes it does
unless told otherwise.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-05 12:14:15 +03:00
Paul Mackerras 5975a2e095 KVM: PPC: Book3S: Add API for in-kernel XICS emulation
This adds the API for userspace to instantiate an XICS device in a VM
and connect VCPUs to it.  The API consists of a new device type for
the KVM_CREATE_DEVICE ioctl, a new capability KVM_CAP_IRQ_XICS, which
functions similarly to KVM_CAP_IRQ_MPIC, and the KVM_IRQ_LINE ioctl,
which is used to assert and deassert interrupt inputs of the XICS.

The XICS device has one attribute group, KVM_DEV_XICS_GRP_SOURCES.
Each attribute within this group corresponds to the state of one
interrupt source.  The attribute number is the same as the interrupt
source number.

This does not support irq routing or irqfd yet.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-02 15:28:36 +02:00
Scott Wood 07f0a7bdec kvm: destroy emulated devices on VM exit
The hassle of getting refcounting right was greater than the hassle
of keeping a list of devices to destroy on VM exit.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26 20:27:28 +02:00
Scott Wood 5df554ad5b kvm/ppc/mpic: in-kernel MPIC emulation
Hook the MPIC code up to the KVM interfaces, add locking, etc.

Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: add stub function for kvmppc_mpic_set_epr, non-booke, 64bit]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26 20:27:23 +02:00
Scott Wood 852b6d57dc kvm: add device control API
Currently, devices that are emulated inside KVM are configured in a
hardcoded manner based on an assumption that any given architecture
only has one way to do it.  If there's any need to access device state,
it is done through inflexible one-purpose-only IOCTLs (e.g.
KVM_GET/SET_LAPIC).  Defining new IOCTLs for every little thing is
cumbersome and depletes a limited numberspace.

This API provides a mechanism to instantiate a device of a certain
type, returning an ID that can be used to set/get attributes of the
device.  Attributes may include configuration parameters (e.g.
register base address), device state, operational commands, etc.  It
is similar to the ONE_REG API, except that it acts on devices rather
than vcpus.

Both device types and individual attributes can be tested without having
to create the device or get/set the attribute, without the need for
separately managing enumerated capabilities.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26 20:27:20 +02:00
Alexander Graf 7df35f5496 KVM: Move irqfd resample cap handling to generic code
Now that we have most irqfd code completely platform agnostic, let's move
irqfd's resample capability return to generic code as well.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-26 20:27:19 +02:00
Alexander Graf e8cde0939d KVM: Move irq routing setup to irqchip.c
Setting up IRQ routes is nothing IOAPIC specific. Extract everything
that really is generic code into irqchip.c and only leave the ioapic
specific bits to irq_comm.c.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-26 20:27:18 +02:00
Alexander Graf 1c9f8520bd KVM: Extract generic irqchip logic into irqchip.c
The current irq_comm.c file contains pieces of code that are generic
across different irqchip implementations, as well as code that is
fully IOAPIC specific.

Split the generic bits out into irqchip.c.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-26 20:27:17 +02:00
Alexander Graf aa8d5944b8 KVM: Move irq routing to generic code
The IRQ routing set ioctl lives in the hacky device assignment code inside
of KVM today. This is definitely the wrong place for it. Move it to the much
more natural kvm_main.c.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-26 20:27:17 +02:00
Alexander Graf a725d56a02 KVM: Introduce CONFIG_HAVE_KVM_IRQ_ROUTING
Quite a bit of code in KVM has been conditionalized on availability of
IOAPIC emulation. However, most of it is generically applicable to
platforms that don't have an IOPIC, but a different type of irq chip.

Make code that only relies on IRQ routing, not an APIC itself, on
CONFIG_HAVE_KVM_IRQ_ROUTING, so that we can reuse it later.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-26 20:27:14 +02:00
Alexander Graf 8175e5b79c KVM: Add KVM_IRQCHIP_NUM_PINS in addition to KVM_IOAPIC_NUM_PINS
The concept of routing interrupt lines to an irqchip is nothing
that is IOAPIC specific. Every irqchip has a maximum number of pins
that can be linked to irq lines.

So let's add a new define that allows us to reuse generic code for
non-IOAPIC platforms.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-26 20:27:13 +02:00
Yang Zhang a20ed54d6e KVM: VMX: Add the deliver posted interrupt algorithm
Only deliver the posted interrupt when target vcpu is running
and there is no previous interrupt pending in pir.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-16 16:32:40 -03:00
Yang Zhang cf9e65b773 KVM: Set TMR when programming ioapic entry
We already know the trigger mode of a given interrupt when programming
the ioapice entry. So it's not necessary to set it in each interrupt
delivery.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-16 16:32:40 -03:00
Yang Zhang 3d81bc7e96 KVM: Call common update function when ioapic entry changed.
Both TMR and EOI exit bitmap need to be updated when ioapic changed
or vcpu's id/ldr/dfr changed. So use common function instead eoi exit
bitmap specific function.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-16 16:32:40 -03:00
Yang Zhang 2c2bf01136 KVM: Use eoi to track RTC interrupt delivery status
Current interrupt coalescing logci which only used by RTC has conflict
with Posted Interrupt.
This patch introduces a new mechinism to use eoi to track interrupt:
When delivering an interrupt to vcpu, the pending_eoi set to number of
vcpu that received the interrupt. And decrease it when each vcpu writing
eoi. No subsequent RTC interrupt can deliver to vcpu until all vcpus
write eoi.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15 23:20:35 -03:00
Yang Zhang aa2fbe6d44 KVM: Let ioapic know the irq line status
Userspace may deliver RTC interrupt without query the status. So we
want to track RTC EOI for this case.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15 23:20:34 -03:00
Yang Zhang f3bff6318f KVM: Force vmexit with virtual interrupt delivery
Need the EOI to track interrupt deliver status, so force vmexit
on EOI for rtc interrupt when enabling virtual interrupt delivery.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15 23:20:34 -03:00
Yang Zhang 106069193c KVM: Add reset/restore rtc_status support
restore rtc_status from migration or save/restore

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15 23:20:34 -03:00
Yang Zhang b4f2225c07 KVM: Return destination vcpu on interrupt injection
Add a new parameter to know vcpus who received the interrupt.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15 23:20:34 -03:00
Yang Zhang 8dc6aade5b KVM: Introduce struct rtc_status
rtc_status is used to track RTC interrupt delivery status. The pending_eoi
will be increased by vcpu who received RTC interrupt and will be decreased
when EOI to this interrupt.
Also, we use dest_map to record the destination vcpu to avoid the case that
vcpu who didn't get the RTC interupt, but issued EOI with same vector of RTC
and descreased pending_eoi by mistake.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15 23:20:33 -03:00