Commit Graph

874 Commits

Author SHA1 Message Date
Christoffer Dall 1a74847885 arm/arm64: KVM: Fix migration race in the arch timer
When a VCPU is no longer running, we currently check to see if it has a
timer scheduled in the future, and if it does, we schedule a host
hrtimer to notify is in case the timer expires while the VCPU is still
not running.  When the hrtimer fires, we mask the guest's timer and
inject the timer IRQ (still relying on the guest unmasking the time when
it receives the IRQ).

This is all good and fine, but when migration a VM (checkpoint/restore)
this introduces a race.  It is unlikely, but possible, for the following
sequence of events to happen:

 1. Userspace stops the VM
 2. Hrtimer for VCPU is scheduled
 3. Userspace checkpoints the VGIC state (no pending timer interrupts)
 4. The hrtimer fires, schedules work in a workqueue
 5. Workqueue function runs, masks the timer and injects timer interrupt
 6. Userspace checkpoints the timer state (timer masked)

At restore time, you end up with a masked timer without any timer
interrupts and your guest halts never receiving timer interrupts.

Fix this by only kicking the VCPU in the workqueue function, and sample
the expired state of the timer when entering the guest again and inject
the interrupt and mask the timer only then.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-14 13:48:00 +01:00
Christoffer Dall 47a98b15ba arm/arm64: KVM: support for un-queuing active IRQs
Migrating active interrupts causes the active state to be lost
completely. This implements some additional bitmaps to track the active
state on the distributor and export this to user space.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-14 13:46:44 +01:00
Alex Bennée 71760950bf arm/arm64: KVM: add a common vgic_queue_irq_to_lr fn
This helps re-factor away some of the repetitive code and makes the code
flow more nicely.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-14 13:44:52 +01:00
Christoffer Dall ae705930fc arm/arm64: KVM: Keep elrsr/aisr in sync with software model
There is an interesting bug in the vgic code, which manifests itself
when the KVM run loop has a signal pending or needs a vmid generation
rollover after having disabled interrupts but before actually switching
to the guest.

In this case, we flush the vgic as usual, but we sync back the vgic
state and exit to userspace before entering the guest.  The consequence
is that we will be syncing the list registers back to the software model
using the GICH_ELRSR and GICH_EISR from the last execution of the guest,
potentially overwriting a list register containing an interrupt.

This showed up during migration testing where we would capture a state
where the VM has masked the arch timer but there were no interrupts,
resulting in a hung test.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Reported-by: Alex Bennee <alex.bennee@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-14 13:42:07 +01:00
Wei Yongjun b52104e509 arm/arm64: KVM: fix missing unlock on error in kvm_vgic_create()
Add the missing unlock before return from function kvm_vgic_create()
in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-13 11:40:57 +01:00
Eric Auger 174178fed3 KVM: arm/arm64: add irqfd support
This patch enables irqfd on arm/arm64.

Both irqfd and resamplefd are supported. Injection is implemented
in vgic.c without routing.

This patch enables CONFIG_HAVE_KVM_EVENTFD and CONFIG_HAVE_KVM_IRQFD.

KVM_CAP_IRQFD is now advertised. KVM_CAP_IRQFD_RESAMPLE capability
automatically is advertised as soon as CONFIG_HAVE_KVM_IRQFD is set.

Irqfd injection is restricted to SPI. The rationale behind not
supporting PPI irqfd injection is that any device using a PPI would
be a private-to-the-CPU device (timer for instance), so its state
would have to be context-switched along with the VCPU and would
require in-kernel wiring anyhow. It is not a relevant use case for
irqfds.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12 15:15:34 +01:00
Eric Auger 649cf73994 KVM: arm/arm64: remove coarse grain dist locking at kvm_vgic_sync_hwstate
To prepare for irqfd addition, coarse grain locking is removed at
kvm_vgic_sync_hwstate level and finer grain locking is introduced in
vgic_process_maintenance only.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12 15:15:33 +01:00
Eric Auger 01c94e64f5 KVM: introduce kvm_arch_intc_initialized and use it in irqfd
Introduce __KVM_HAVE_ARCH_INTC_INITIALIZED define and
associated kvm_arch_intc_initialized function. This latter
allows to test whether the virtual interrupt controller is initialized
and ready to accept virtual IRQ injection. On some architectures,
the virtual interrupt controller is dynamically instantiated, justifying
that kind of check.

The new function can now be used by irqfd to check whether the
virtual interrupt controller is ready on KVM_IRQFD request. If not,
KVM_IRQFD returns -EAGAIN.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12 15:15:32 +01:00
Mark Rutland 0f37247574 KVM: vgic: add virt-capable compatible strings
Several dts only list "arm,cortex-a7-gic" or "arm,gic-400" in their GIC
compatible list, and while this is correct (and supported by the GIC
driver), KVM will fail to detect that it can support these cases.

This patch adds the missing strings to the VGIC code. The of_device_id
entries are padded to keep the probe function data aligned.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-11 15:27:48 +01:00
Paolo Bonzini dc9be0fac7 kvm: move advertising of KVM_CAP_IRQFD to common code
POWER supports irqfds but forgot to advertise them.  Some userspace does
not check for the capability, but others check it---thus they work on
x86 and s390 but not POWER.

To avoid that other architectures in the future make the same mistake, let
common code handle KVM_CAP_IRQFD the same way as KVM_CAP_IRQFD_RESAMPLE.

Reported-and-tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 297e21053a
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 21:18:59 -03:00
Xiubo Li 1170adc6dd KVM: Use pr_info/pr_err in kvm_main.c
WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then
dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
+   printk(KERN_INFO "kvm: exiting hardware virtualization\n");

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then
dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
+	printk(KERN_ERR "kvm: misc device register failed\n");

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:45 -03:00
Xiubo Li 20e87b7224 KVM: Fix indentation in kvm_main.c
ERROR: code indent should use tabs where possible
+                                 const struct kvm_io_range *r2)$

WARNING: please, no spaces at the start of a line
+                                 const struct kvm_io_range *r2)$

This patch fixes this ERROR & WARNING to reduce noise when checking new
patches in kvm_main.c.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:44 -03:00
Xiubo Li b7d409deb9 KVM: no space before tabs in kvm_main.c
WARNING: please, no space before tabs
+ * ^I^Ikvm->lock --> kvm->slots_lock --> kvm->irq_lock$

WARNING: please, no space before tabs
+^I^I * ^I- gfn_to_hva (kvm_read_guest, gfn_to_pfn)$

WARNING: please, no space before tabs
+^I^I * ^I- kvm_is_visible_gfn (mmu_check_roots)$

This patch fixes these warnings to reduce noise when checking new
patches in kvm_main.c.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:44 -03:00
Xiubo Li f95ef0cd02 KVM: Missing blank line after declarations in kvm_main.c
There are many Warnings like this:
WARNING: Missing a blank line after declarations
+	struct kvm_coalesced_mmio_zone zone;
+	r = -EFAULT;

This patch fixes these warnings to reduce noise when checking new
patches in kvm_main.c.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:44 -03:00
Xiubo Li ee543159d5 KVM: EXPORT_SYMBOL should immediately follow its function
WARNING: EXPORT_SYMBOL(foo); should immediately follow its
function/variable
+EXPORT_SYMBOL_GPL(gfn_to_page);

This patch fixes these warnings to reduce noise when checking new
patches in kvm_main.c.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:44 -03:00
Xiubo Li f4fee93270 KVM: Fix ERROR: do not initialise statics to 0 or NULL in kvm_main.c
ERROR: do not initialise statics to 0 or NULL
+static int kvm_usage_count = 0;

The kvm_usage_count will be placed to .bss segment when linking, so
not need to set it to 0 here obviously.

This patch fixes this ERROR to reduce noise when checking new patches
in kvm_main.c.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:44 -03:00
Xiubo Li a642a17567 KVM: Fix WARNING: labels should not be indented in kvm_main.c
WARNING: labels should not be indented
+   out_free_irq_routing:

This patch fixes this WARNING to reduce noise when checking new patches
in kvm_main.c.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:43 -03:00
Xiubo Li 893bdbf165 KVM: Fix WARNINGs for 'sizeof(X)' instead of 'sizeof X' in kvm_main.c
There are many WARNINGs like this:
WARNING: sizeof tr should be sizeof(tr)
+	if (copy_from_user(&tr, argp, sizeof tr))

In kvm_main.c many places are using 'sizeof(X)', and the other places
are using 'sizeof X', while the kernel recommands to use 'sizeof(X)',
so this patch will replace all 'sizeof X' to 'sizeof(X)' to make them
consistent and at the same time to reduce the WARNINGs noise when we
are checking new patches.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:43 -03:00
Thomas Huth 548ef28449 KVM: Get rid of kvm_kvfree()
kvm_kvfree() provides exactly the same functionality as the
new common kvfree() function - so let's simply replace the
kvm function with the common function.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:43 -03:00
Christian Borntraeger 0fa9778895 KVM: make halt_poll_ns static
halt_poll_ns is used only locally. Make it static.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:43 -03:00
Kevin Mulvey ae548c5c80 KVM: fix checkpatch.pl errors in kvm/irqchip.c
Fix whitespace around while

Signed-off-by: Kevin Mulvey <kmulvey@linux.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:42 -03:00
Kevin Mulvey bfda0e8491 KVM: white space formatting in kvm_main.c
Better alignment of loop using tabs rather than spaces, this
makes checkpatch.pl happier.

Signed-off-by: Kevin Mulvey <kmulvey@linux.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 10:37:42 -03:00
Linus Torvalds b9085bcbf5 Fairly small update, but there are some interesting new features.
Common: Optional support for adding a small amount of polling on each HLT
 instruction executed in the guest (or equivalent for other architectures).
 This can improve latency up to 50% on some scenarios (e.g. O_DSYNC writes
 or TCP_RR netperf tests).  This also has to be enabled manually for now,
 but the plan is to auto-tune this in the future.
 
 ARM/ARM64: the highlights are support for GICv3 emulation and dirty page
 tracking
 
 s390: several optimizations and bugfixes.  Also a first: a feature
 exposed by KVM (UUID and long guest name in /proc/sysinfo) before
 it is available in IBM's hypervisor! :)
 
 MIPS: Bugfixes.
 
 x86: Support for PML (page modification logging, a new feature in
 Broadwell Xeons that speeds up dirty page tracking), nested virtualization
 improvements (nested APICv---a nice optimization), usual round of emulation
 fixes.  There is also a new option to reduce latency of the TSC deadline
 timer in the guest; this needs to be tuned manually.
 
 Some commits are common between this pull and Catalin's; I see you
 have already included his tree.
 
 ARM has other conflicts where functions are added in the same place
 by 3.19-rc and 3.20 patches.  These are not large though, and entirely
 within KVM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJU28rkAAoJEL/70l94x66DXqQH/1TDOfJIjW7P2kb0Sw7Fy1wi
 cEX1KO/VFxAqc8R0E/0Wb55CXyPjQJM6xBXuFr5cUDaIjQ8ULSktL4pEwXyyv/s5
 DBDkN65mriry2w5VuEaRLVcuX9Wy+tqLQXWNkEySfyb4uhZChWWHvKEcgw5SqCyg
 NlpeHurYESIoNyov3jWqvBjr4OmaQENyv7t2c6q5ErIgG02V+iCux5QGbphM2IC9
 LFtPKxoqhfeB2xFxTOIt8HJiXrZNwflsTejIlCl/NSEiDVLLxxHCxK2tWK/tUXMn
 JfLD9ytXBWtNMwInvtFm4fPmDouv2VDyR0xnK2db+/axsJZnbxqjGu1um4Dqbak=
 =7gdx
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM update from Paolo Bonzini:
 "Fairly small update, but there are some interesting new features.

  Common:
     Optional support for adding a small amount of polling on each HLT
     instruction executed in the guest (or equivalent for other
     architectures).  This can improve latency up to 50% on some
     scenarios (e.g. O_DSYNC writes or TCP_RR netperf tests).  This
     also has to be enabled manually for now, but the plan is to
     auto-tune this in the future.

  ARM/ARM64:
     The highlights are support for GICv3 emulation and dirty page
     tracking

  s390:
     Several optimizations and bugfixes.  Also a first: a feature
     exposed by KVM (UUID and long guest name in /proc/sysinfo) before
     it is available in IBM's hypervisor! :)

  MIPS:
     Bugfixes.

  x86:
     Support for PML (page modification logging, a new feature in
     Broadwell Xeons that speeds up dirty page tracking), nested
     virtualization improvements (nested APICv---a nice optimization),
     usual round of emulation fixes.

     There is also a new option to reduce latency of the TSC deadline
     timer in the guest; this needs to be tuned manually.

     Some commits are common between this pull and Catalin's; I see you
     have already included his tree.

  Powerpc:
     Nothing yet.

     The KVM/PPC changes will come in through the PPC maintainers,
     because I haven't received them yet and I might end up being
     offline for some part of next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (130 commits)
  KVM: ia64: drop kvm.h from installed user headers
  KVM: x86: fix build with !CONFIG_SMP
  KVM: x86: emulate: correct page fault error code for NoWrite instructions
  KVM: Disable compat ioctl for s390
  KVM: s390: add cpu model support
  KVM: s390: use facilities and cpu_id per KVM
  KVM: s390/CPACF: Choose crypto control block format
  s390/kernel: Update /proc/sysinfo file with Extended Name and UUID
  KVM: s390: reenable LPP facility
  KVM: s390: floating irqs: fix user triggerable endless loop
  kvm: add halt_poll_ns module parameter
  kvm: remove KVM_MMIO_SIZE
  KVM: MIPS: Don't leak FPU/DSP to guest
  KVM: MIPS: Disable HTW while in guest
  KVM: nVMX: Enable nested posted interrupt processing
  KVM: nVMX: Enable nested virtual interrupt delivery
  KVM: nVMX: Enable nested apic register virtualization
  KVM: nVMX: Make nested control MSRs per-cpu
  KVM: nVMX: Enable nested virtualize x2apic mode
  KVM: nVMX: Prepare for using hardware MSR bitmap
  ...
2015-02-13 09:55:09 -08:00
Andrea Arcangeli 0664e57ff0 mm: gup: kvm use get_user_pages_unlocked
Use the more generic get_user_pages_unlocked which has the additional
benefit of passing FAULT_FLAG_ALLOW_RETRY at the very first page fault
(which allows the first page fault in an unmapped area to be always able
to block indefinitely by being allowed to release the mmap_sem).

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:05 -08:00
Christian Borntraeger de8e5d7440 KVM: Disable compat ioctl for s390
We never had a 31bit QEMU/kuli running. We would need to review several
ioctls to check if this creates holes, bugs or whatever to make it work.
Lets just disable compat support for KVM on s390.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-09 12:44:14 +01:00
Paolo Bonzini f781951299 kvm: add halt_poll_ns module parameter
This patch introduces a new module parameter for the KVM module; when it
is present, KVM attempts a bit of polling on every HLT before scheduling
itself out via kvm_vcpu_block.

This parameter helps a lot for latency-bound workloads---in particular
I tested it with O_DSYNC writes with a battery-backed disk in the host.
In this case, writes are fast (because the data doesn't have to go all
the way to the platters) but they cannot be merged by either the host or
the guest.  KVM's performance here is usually around 30% of bare metal,
or 50% if you use cache=directsync or cache=writethrough (these
parameters avoid that the guest sends pointless flush requests, and
at the same time they are not slow because of the battery-backed cache).
The bad performance happens because on every halt the host CPU decides
to halt itself too.  When the interrupt comes, the vCPU thread is then
migrated to a new physical CPU, and in general the latency is horrible
because the vCPU thread has to be scheduled back in.

With this patch performance reaches 60-65% of bare metal and, more
important, 99% of what you get if you use idle=poll in the guest.  This
means that the tunable gets rid of this particular bottleneck, and more
work can be done to improve performance in the kernel or QEMU.

Of course there is some price to pay; every time an otherwise idle vCPUs
is interrupted by an interrupt, it will poll unnecessarily and thus
impose a little load on the host.  The above results were obtained with
a mostly random value of the parameter (500000), and the load was around
1.5-2.5% CPU usage on one of the host's core for each idle guest vCPU.

The patch also adds a new stat, /sys/kernel/debug/kvm/halt_successful_poll,
that can be used to tune the parameter.  It counts how many HLT
instructions received an interrupt during the polling period; each
successful poll avoids that Linux schedules the VCPU thread out and back
in, and may also avoid a likely trip to C1 and back for the physical CPU.

While the VM is idle, a Linux 4 VCPU VM halts around 10 times per second.
Of these halts, almost all are failed polls.  During the benchmark,
instead, basically all halts end within the polling period, except a more
or less constant stream of 50 per second coming from vCPUs that are not
running the benchmark.  The wasted time is thus very low.  Things may
be slightly different for Windows VMs, which have a ~10 ms timer tick.

The effect is also visible on Marcelo's recently-introduced latency
test for the TSC deadline timer.  Though of course a non-RT kernel has
awful latency bounds, the latency of the timer is around 8000-10000 clock
cycles compared to 20000-120000 without setting halt_poll_ns.  For the TSC
deadline timer, thus, the effect is both a smaller average latency and
a smaller variance.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-06 13:08:37 +01:00
Kai Huang 3b0f1d01e5 KVM: Rename kvm_arch_mmu_write_protect_pt_masked to be more generic for log dirty
We don't have to write protect guest memory for dirty logging if architecture
supports hardware dirty logging, such as PML on VMX, so rename it to be more
generic.

Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-29 15:30:38 +01:00
Tiejun Chen b0165f1b41 kvm: update_memslots: clean flags for invalid memslots
Indeed, any invalid memslots should be new->npages = 0,
new->base_gfn = 0 and new->flags = 0 at the same time.

Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-27 21:31:44 +01:00
Christoffer Dall 4b99058995 KVM: Remove unused config symbol
The dirty patch logging series introduced both
HAVE_KVM_ARCH_DIRTY_LOG_PROTECT and KVM_GENERIC_DIRTYLOG_READ_PROTECT
config symbols, but only KVM_GENERIC_DIRTYLOG_READ_PROTECT is used.
Just remove the unused one.

(The config symbol was renamed during the development of the patch
series and the old name just creeped in by accident.()

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-23 10:52:03 +01:00
Andre Przywara 4fa96afd94 arm/arm64: KVM: force alignment of VGIC dist/CPU/redist addresses
Although the GIC architecture requires us to map the MMIO regions
only at page aligned addresses, we currently do not enforce this from
the kernel side.
Restrict any vGICv2 regions to be 4K aligned and any GICv3 regions
to be 64K aligned. Document this requirement.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:33 +01:00
Andre Przywara ac3d373564 arm/arm64: KVM: allow userland to request a virtual GICv3
With all of the GICv3 code in place now we allow userland to ask the
kernel for using a virtual GICv3 in the guest.
Also we provide the necessary support for guests setting the memory
addresses for the virtual distributor and redistributors.
This requires some userland code to make use of that feature and
explicitly ask for a virtual GICv3.
Document that KVM_CREATE_IRQCHIP only works for GICv2, but is
considered legacy and using KVM_CREATE_DEVICE is preferred.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:33 +01:00
Andre Przywara b5d84ff600 arm/arm64: KVM: enable kernel side of GICv3 emulation
With all the necessary GICv3 emulation code in place, we can now
connect the code to the GICv3 backend in the kernel.
The LR register handling is different depending on the emulated GIC
model, so provide different implementations for each.
Also allow non-v2-compatible GICv3 implementations (which don't
provide MMIO regions for the virtual CPU interface in the DT), but
restrict those hosts to support GICv3 guests only.
If the device tree provides a GICv2 compatible GICV resource entry,
but that one is faulty, just disable the GICv2 emulation and let the
user use at least the GICv3 emulation for guests.
To provide proper support for the legacy KVM_CREATE_IRQCHIP ioctl,
note virtual GICv2 compatibility in struct vgic_params and use it
on creating a VGICv2.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:32 +01:00
Andre Przywara 6d52f35af1 arm64: KVM: add SGI generation register emulation
While the generation of a (virtual) inter-processor interrupt (SGI)
on a GICv2 works by writing to a MMIO register, GICv3 uses the system
register ICC_SGI1R_EL1 to trigger them.
Add a trap handler function that calls the new SGI register handler
in the GICv3 code. As ICC_SRE_EL1.SRE at this point is still always 0,
this will not trap yet, but will only be used later when all the data
structures have been initialized properly.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:32 +01:00
Andre Przywara a0675c25d6 arm/arm64: KVM: add virtual GICv3 distributor emulation
With everything separated and prepared, we implement a model of a
GICv3 distributor and redistributors by using the existing framework
to provide handler functions for each register group.

Currently we limit the emulation to a model enforcing a single
security state, with SRE==1 (forcing system register access) and
ARE==1 (allowing more than 8 VCPUs).

We share some of the functions provided for GICv2 emulation, but take
the different ways of addressing (v)CPUs into account.
Save and restore is currently not implemented.

Similar to the split-off of the GICv2 specific code, the new emulation
code goes into a new file (vgic-v3-emul.c).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:31 +01:00
Andre Przywara 9fedf14677 arm/arm64: KVM: add opaque private pointer to MMIO data
For a GICv2 there is always only one (v)CPU involved: the one that
does the access. On a GICv3 the access to a CPU redistributor is
memory-mapped, but not banked, so the (v)CPU affected is determined by
looking at the MMIO address region being accessed.
To allow passing the affected CPU into the accessors later, extend
struct kvm_exit_mmio to add an opaque private pointer parameter.
The current GICv2 emulation just does not use it.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:30 +01:00
Andre Przywara 1d916229e3 arm/arm64: KVM: split GICv2 specific emulation code from vgic.c
vgic.c is currently a mixture of generic vGIC emulation code and
functions specific to emulating a GICv2. To ease the addition of
GICv3, split off strictly v2 specific parts into a new file
vgic-v2-emul.c.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

-------
As the diff isn't always obvious here (and to aid eventual rebases),
here is a list of high-level changes done to the code:
* added new file to respective arm/arm64 Makefiles
* moved GICv2 specific functions to vgic-v2-emul.c:
  - handle_mmio_misc()
  - handle_mmio_set_enable_reg()
  - handle_mmio_clear_enable_reg()
  - handle_mmio_set_pending_reg()
  - handle_mmio_clear_pending_reg()
  - handle_mmio_priority_reg()
  - vgic_get_target_reg()
  - vgic_set_target_reg()
  - handle_mmio_target_reg()
  - handle_mmio_cfg_reg()
  - handle_mmio_sgi_reg()
  - vgic_v2_unqueue_sgi()
  - read_set_clear_sgi_pend_reg()
  - write_set_clear_sgi_pend_reg()
  - handle_mmio_sgi_set()
  - handle_mmio_sgi_clear()
  - vgic_v2_handle_mmio()
  - vgic_get_sgi_sources()
  - vgic_dispatch_sgi()
  - vgic_v2_queue_sgi()
  - vgic_v2_map_resources()
  - vgic_v2_init()
  - vgic_v2_add_sgi_source()
  - vgic_v2_init_model()
  - vgic_v2_init_emulation()
  - handle_cpu_mmio_misc()
  - handle_mmio_abpr()
  - handle_cpu_mmio_ident()
  - vgic_attr_regs_access()
  - vgic_create() (renamed to vgic_v2_create())
  - vgic_destroy() (renamed to vgic_v2_destroy())
  - vgic_has_attr() (renamed to vgic_v2_has_attr())
  - vgic_set_attr() (renamed to vgic_v2_set_attr())
  - vgic_get_attr() (renamed to vgic_v2_get_attr())
  - struct kvm_mmio_range vgic_dist_ranges[]
  - struct kvm_mmio_range vgic_cpu_ranges[]
  - struct kvm_device_ops kvm_arm_vgic_v2_ops {}

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:30 +01:00
Andre Przywara 832158125d arm/arm64: KVM: add vgic.h header file
vgic.c is currently a mixture of generic vGIC emulation code and
functions specific to emulating a GICv2. To ease the addition of
GICv3 later, we create new header file vgic.h, which holds constants
and prototypes of commonly used functions.
Rename some identifiers to avoid name space clutter.
I removed the long-standing comment about using the kvm_io_bus API
to tackle the GIC register ranges, as it wouldn't be a win for us
anymore.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

-------
As the diff isn't always obvious here (and to aid eventual rebases),
here is a list of high-level changes done to the code:
* moved definitions and prototypes from vgic.c to vgic.h:
  - VGIC_ADDR_UNDEF
  - ACCESS_{READ,WRITE}_*
  - vgic_init()
  - vgic_update_state()
  - vgic_kick_vcpus()
  - vgic_get_vmcr()
  - vgic_set_vmcr()
  - struct mmio_range {} (renamed to struct kvm_mmio_range)
* removed static keyword and exported prototype in vgic.h:
  - vgic_bitmap_get_reg()
  - vgic_bitmap_set_irq_val()
  - vgic_bitmap_get_shared_map()
  - vgic_bytemap_get_reg()
  - vgic_dist_irq_set_pending()
  - vgic_dist_irq_clear_pending()
  - vgic_cpu_irq_clear()
  - vgic_reg_access()
  - handle_mmio_raz_wi()
  - vgic_handle_enable_reg()
  - vgic_handle_set_pending_reg()
  - vgic_handle_clear_pending_reg()
  - vgic_handle_cfg_reg()
  - vgic_unqueue_irqs()
  - find_matching_range() (renamed to vgic_find_range)
  - vgic_handle_mmio_range()
  - vgic_update_state()
  - vgic_get_vmcr()
  - vgic_set_vmcr()
  - vgic_queue_irq()
  - vgic_kick_vcpus()
  - vgic_init()
  - vgic_v2_init_emulation()
  - vgic_has_attr_regs()
  - vgic_set_common_attr()
  - vgic_get_common_attr()
  - vgic_destroy()
  - vgic_create()
* moved functions to vgic.h (static inline):
  - mmio_data_read()
  - mmio_data_write()
  - is_in_range()

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:30 +01:00
Andre Przywara b60da146c1 arm/arm64: KVM: refactor/wrap vgic_set/get_attr()
vgic_set_attr() and vgic_get_attr() contain both code specific for
the emulated GIC as well as code for the userland facing, generic
part of the GIC.
Split the guest GIC facing code of from the generic part to allow
easier splitting later.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:29 +01:00
Andre Przywara d97f683d0f arm/arm64: KVM: refactor MMIO accessors
The MMIO accessors for GICD_I[CS]ENABLER, GICD_I[CS]PENDR and
GICD_ICFGR behave very similar for GICv2 and GICv3, although the way
the affected VCPU is determined differs.
Since we need them to access the registers from three different
places in the future, we factor out a generic, backend-facing
implementation and use small wrappers in the current GICv2 emulation.
This will ease adding GICv3 accessors later.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:29 +01:00
Andre Przywara 2f5fa41a7a arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable
ICC_SRE_EL1 is a system register allowing msr/mrs accesses to the
GIC CPU interface for EL1 (guests). Currently we force it to 0, but
for proper GICv3 support we have to allow guests to use it (depending
on their selected virtual GIC model).
So add ICC_SRE_EL1 to the list of saved/restored registers on a
world switch, but actually disallow a guest to change it by only
restoring a fixed, once-initialized value.
This value depends on the GIC model userland has chosen for a guest.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:28 +01:00
Andre Przywara 3caa2d8c3b arm/arm64: KVM: make the maximum number of vCPUs a per-VM value
Currently the maximum number of vCPUs supported is a global value
limited by the used GIC model. GICv3 will lift this limit, but we
still need to observe it for guests using GICv2.
So the maximum number of vCPUs is per-VM value, depending on the
GIC model the guest uses.
Store and check the value in struct kvm_arch, but keep it down to
8 for now.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:28 +01:00
Andre Przywara 4ce7ebdfc6 arm/arm64: KVM: dont rely on a valid GICH base address
To check whether the vGIC was already initialized, we currently check
the GICH base address for not being NULL. Since with GICv3 we may
get along without this address, lets use the irqchip_in_kernel()
function to detect an already initialized vGIC.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:27 +01:00
Andre Przywara ea2f83a7de arm/arm64: KVM: move kvm_register_device_ops() into vGIC probing
Currently we unconditionally register the GICv2 emulation device
during the host's KVM initialization. Since with GICv3 support we
may end up with only v2 or only v3 or both supported, we move the
registration into the GIC probing function, where we will later know
which combination is valid.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:27 +01:00
Andre Przywara b26e5fdac4 arm/arm64: KVM: introduce per-VM ops
Currently we only have one virtual GIC model supported, so all guests
use the same emulation code. With the addition of another model we
end up with different guests using potentially different vGIC models,
so we have to split up some functions to be per VM.
Introduce a vgic_vm_ops struct to hold function pointers for those
functions that are different and provide the necessary code to
initialize them.
Also split up the vgic_init() function to separate out VGIC model
specific functionality into a separate function, which will later be
different for a GICv3 model.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:26 +01:00
Andre Przywara 05bc8aafe6 arm/arm64: KVM: wrap 64 bit MMIO accesses with two 32 bit ones
Some GICv3 registers can and will be accessed as 64 bit registers.
Currently the register handling code can only deal with 32 bit
accesses, so we do two consecutive calls to cover this.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:26 +01:00
Andre Przywara 96415257a1 arm/arm64: KVM: refactor vgic_handle_mmio() function
Currently we only need to deal with one MMIO region for the GIC
emulation (the GICv2 distributor), but we soon need to extend this.
Refactor the existing code to allow easier addition of different
ranges without code duplication.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:25 +01:00
Andre Przywara 59892136c4 arm/arm64: KVM: pass down user space provided GIC type into vGIC code
With the introduction of a second emulated GIC model we need to let
userspace specify the GIC model to use for each VM. Pass the
userspace provided value down into the vGIC code and store it there
to differentiate later.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:25 +01:00
Mario Smarduch ba0513b5b8 KVM: Add generic support for dirty page logging
kvm_get_dirty_log() provides generic handling of dirty bitmap, currently reused
by several architectures. Building on that we intrdoduce
kvm_get_dirty_log_protect() adding write protection to mark these pages dirty
for future write access, before next KVM_GET_DIRTY_LOG ioctl call from user
space.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 14:40:14 +01:00
Mario Smarduch a6d5101661 KVM: Add architecture-defined TLB flush support
Allow architectures to override the generic kvm_flush_remote_tlbs()
function via HAVE_KVM_ARCH_TLB_FLUSH_ALL. ARMv7 will need this to
provide its own TLB flush interface.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 14:40:14 +01:00
Eric Auger 065c003482 KVM: arm/arm64: vgic: add init entry to VGIC KVM device
Since the advent of VGIC dynamic initialization, this latter is
initialized quite late on the first vcpu run or "on-demand", when
injecting an IRQ or when the guest sets its registers.

This initialization could be initiated explicitly much earlier
by the users-space, as soon as it has provided the requested
dimensioning parameters.

This patch adds a new entry to the VGIC KVM device that allows
the user to manually request the VGIC init:
- a new KVM_DEV_ARM_VGIC_GRP_CTRL group is introduced.
- Its first attribute is KVM_DEV_ARM_VGIC_CTRL_INIT

The rationale behind introducing a group is to be able to add other
controls later on, if needed.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-11 14:12:15 +01:00
Eric Auger 66b030e48a KVM: arm/arm64: vgic: vgic_init returns -ENODEV when no online vcpu
To be more explicit on vgic initialization failure, -ENODEV is
returned by vgic_init when no online vcpus can be found at init.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-11 14:12:15 +01:00
Wincy Van ff651cb613 KVM: nVMX: Add nested msr load/restore algorithm
Several hypervisors need MSR auto load/restore feature.
We read MSRs from VM-entry MSR load area which specified by L1,
and load them via kvm_set_msr in the nested entry.
When nested exit occurs, we get MSRs via kvm_get_msr, writing
them to L1`s MSR store area. After this, we read MSRs from VM-exit
MSR load area, and load them via kvm_set_msr.

Signed-off-by: Wincy Van <fanwenyi0529@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-08 22:45:14 +01:00
Richard Cochran 2eebdde652 timecounter: keep track of accumulated fractional nanoseconds
The current timecounter implementation will drop a variable amount
of resolution, depending on the magnitude of the time delta. In
other words, reading the clock too often or too close to a time
stamp conversion will introduce errors into the time values. This
patch fixes the issue by introducing a fractional nanosecond field
that accumulates the low order bits.

Reported-by: Janusz Użycki <j.uzycki@elproma.com.pl>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30 18:29:27 -05:00
Paolo Bonzini dbaff30940 kvm: warn on more invariant breakage
Modifying a non-existent slot is not allowed.  Also check that the
first loop doesn't move a deleted slot beyond the used part of
the mslots array.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-28 10:01:25 +01:00
Paolo Bonzini efbeec7098 kvm: fix sorting of memslots with base_gfn == 0
Before commit 0e60b0799f (kvm: change memslot sorting rule from size
to GFN, 2014-12-01), the memslots' sorting key was npages, meaning
that a valid memslot couldn't have its sorting key equal to zero.
On the other hand, a valid memslot can have base_gfn == 0, and invalid
memslots are identified by base_gfn == npages == 0.

Because of this, commit 0e60b0799f broke the invariant that invalid
memslots are at the end of the mslots array.  When a memslot with
base_gfn == 0 was created, any invalid memslot before it were left
in place.

This can be fixed by changing the insertion to use a ">=" comparison
instead of "<=", but some care is needed to avoid breaking the case
of deleting a memslot; see the comment in update_memslots.

Thanks to Tiejun Chen for posting an initial patch for this bug.

Reported-by: Jamie Heilman <jamie@audible.transient.net>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-28 10:01:17 +01:00
Linus Torvalds 66dcff86ba 3.19 changes for KVM:
- spring cleaning: removed support for IA64, and for hardware-assisted
 virtualization on the PPC970
 - ARM, PPC, s390 all had only small fixes
 
 For x86:
 - small performance improvements (though only on weird guests)
 - usual round of hardware-compliancy fixes from Nadav
 - APICv fixes
 - XSAVES support for hosts and guests.  XSAVES hosts were broken because
 the (non-KVM) XSAVES patches inadvertently changed the KVM userspace
 ABI whenever XSAVES was enabled; hence, this part is going to stable.
 Guest support is just a matter of exposing the feature and CPUID leaves
 support.
 
 Right now KVM is broken for PPC BookE in your tree (doesn't compile).
 I'll reply to the pull request with a patch, please apply it either
 before the pull request or in the merge commit, in order to preserve
 bisectability somewhat.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJUkpg+AAoJEL/70l94x66DUmoH/jzXYkptSW9NGgm79KqxGJlD
 lzLnLBkitVvx++Mz5YBhdJEhKKLUlCtifFT1zPJQ/pthQhIRSaaAwZyNGgUs5w5x
 yMGKHiPQFyZRbmQtZhCInW0BftJoYHHciO3nUfHCZnp34My9MP2D55W7/z+fYFfQ
 DuqBSE9ThyZJtZ4zh8NRA9fCOeuqwVYRyoBs820Wbsh4cpIBoIK63Dg7k+CLE+ZV
 MZa/mRL6bAfsn9W5bnOUAgHJ3SPznnWbO3/g0aV+roL/5pffblprJx9lKNR08xUM
 6hDFLop2gDehDJesDkY/o8Ckp1hEouvfsVpSShry4vcgtn0hgh2O5/6Orbmj6vE=
 =Zwq1
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM update from Paolo Bonzini:
 "3.19 changes for KVM:

   - spring cleaning: removed support for IA64, and for hardware-
     assisted virtualization on the PPC970

   - ARM, PPC, s390 all had only small fixes

  For x86:
   - small performance improvements (though only on weird guests)
   - usual round of hardware-compliancy fixes from Nadav
   - APICv fixes
   - XSAVES support for hosts and guests.  XSAVES hosts were broken
     because the (non-KVM) XSAVES patches inadvertently changed the KVM
     userspace ABI whenever XSAVES was enabled; hence, this part is
     going to stable.  Guest support is just a matter of exposing the
     feature and CPUID leaves support"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (179 commits)
  KVM: move APIC types to arch/x86/
  KVM: PPC: Book3S: Enable in-kernel XICS emulation by default
  KVM: PPC: Book3S HV: Improve H_CONFER implementation
  KVM: PPC: Book3S HV: Fix endianness of instruction obtained from HEIR register
  KVM: PPC: Book3S HV: Remove code for PPC970 processors
  KVM: PPC: Book3S HV: Tracepoints for KVM HV guest interactions
  KVM: PPC: Book3S HV: Simplify locking around stolen time calculations
  arch: powerpc: kvm: book3s_paired_singles.c: Remove unused function
  arch: powerpc: kvm: book3s_pr.c: Remove unused function
  arch: powerpc: kvm: book3s.c: Remove some unused functions
  arch: powerpc: kvm: book3s_32_mmu.c: Remove unused function
  KVM: PPC: Book3S HV: Check wait conditions before sleeping in kvmppc_vcore_blocked
  KVM: PPC: Book3S HV: ptes are big endian
  KVM: PPC: Book3S HV: Fix inaccuracies in ICP emulation for H_IPI
  KVM: PPC: Book3S HV: Fix KSM memory corruption
  KVM: PPC: Book3S HV: Fix an issue where guest is paused on receiving HMI
  KVM: PPC: Book3S HV: Fix computation of tlbie operand
  KVM: PPC: Book3S HV: Add missing HPTE unlock
  KVM: PPC: BookE: Improve irq inject tracepoint
  arm/arm64: KVM: Require in-kernel vgic for the arch timers
  ...
2014-12-18 16:05:28 -08:00
Paolo Bonzini 333bce5aac Second round of changes for KVM for arm/arm64 for v3.19; fixes reboot
problems, clarifies VCPU init, and fixes a regression concerning the
 VGIC init flow.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUjsVhAAoJEEtpOizt6ddy5rIH/1V/YVwhprC55YqdHelU9Qu2
 Muzsx+7F71NxC7xgMGFqPD1YrPR+hxvoPhy+ADOBlvcqlolrkDnV9I+8e3geaYNc
 nZ/yEnoGTtbAggiS1smx7usBv34Z88Sd5txNjmj1cmHBy+VOWlyidWMkGBTsfBRe
 mVc61BDUfyC47udgRHXhwS80sbHLJHElmADisFOVmQNBYwwiHiTdx0hMBMnHcC3Y
 /3T0tKxHdeTISnmA+J+n7TcChtTIM4xqC6kwf3rw3b7XX8gdtTKylDHX2GLAg646
 RdebAG2twmGpIc6SxXZbo38f3oY9OFo1Le5xZGa6iUjD56VDw/e4wg4iA2juo0Y=
 =J2Ut
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-3.19-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

Second round of changes for KVM for arm/arm64 for v3.19; fixes reboot
problems, clarifies VCPU init, and fixes a regression concerning the
VGIC init flow.

Conflicts:
	arch/ia64/kvm/kvm-ia64.c [deleted in HEAD and modified in kvmarm]
2014-12-15 13:06:40 +01:00
Christoffer Dall 05971120fc arm/arm64: KVM: Require in-kernel vgic for the arch timers
It is curently possible to run a VM with architected timers support
without creating an in-kernel VGIC, which will result in interrupts from
the virtual timer going nowhere.

To address this issue, move the architected timers initialization to the
time when we run a VCPU for the first time, and then only initialize
(and enable) the architected timers if we have a properly created and
initialized in-kernel VGIC.

When injecting interrupts from the virtual timer to the vgic, the
current setup should ensure that this never calls an on-demand init of
the VGIC, which is the only call path that could return an error from
kvm_vgic_inject_irq(), so capture the return value and raise a warning
if there's an error there.

We also change the kvm_timer_init() function from returning an int to be
a void function, since the function always succeeds.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-15 11:50:42 +01:00
Christoffer Dall ca7d9c829d arm/arm64: KVM: Initialize the vgic on-demand when injecting IRQs
Userspace assumes that it can wire up IRQ injections after having
created all VCPUs and after having created the VGIC, but potentially
before starting the first VCPU.  This can currently lead to lost IRQs
because the state of that IRQ injection is not stored anywhere and we
don't return an error to userspace.

We haven't seen this problem manifest itself yet, presumably because
guests reset the devices on boot, but this could cause issues with
migration and other non-standard startup configurations.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-15 11:36:21 +01:00
Christoffer Dall 1f57be2895 arm/arm64: KVM: Add (new) vgic_initialized macro
Some code paths will need to check to see if the internal state of the
vgic has been initialized (such as when creating new VCPUs), so
introduce such a macro that checks the nr_cpus field which is set when
the vgic has been initialized.

Also set nr_cpus = 0 in kvm_vgic_destroy, because the error path in
vgic_init() will call this function, and code should never errornously
assume the vgic to be properly initialized after an error.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-13 14:17:10 +01:00
Christoffer Dall c52edf5f8c arm/arm64: KVM: Rename vgic_initialized to vgic_ready
The vgic_initialized() macro currently returns the state of the
vgic->ready flag, which indicates if the vgic is ready to be used when
running a VM, not specifically if its internal state has been
initialized.

Rename the macro accordingly in preparation for a more nuanced
initialization flow.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-13 14:17:05 +01:00
Peter Maydell 6d3cfbe21b arm/arm64: KVM: vgic: move reset initialization into vgic_init_maps()
VGIC initialization currently happens in three phases:
 (1) kvm_vgic_create() (triggered by userspace GIC creation)
 (2) vgic_init_maps() (triggered by userspace GIC register read/write
     requests, or from kvm_vgic_init() if not already run)
 (3) kvm_vgic_init() (triggered by first VM run)

We were doing initialization of some state to correspond with the
state of a freshly-reset GIC in kvm_vgic_init(); this is too late,
since it will overwrite changes made by userspace using the
register access APIs before the VM is run. Move this initialization
earlier, into the vgic_init_maps() phase.

This fixes a bug where QEMU could successfully restore a saved
VM state snapshot into a VM that had already been run, but could
not restore it "from cold" using the -loadvm command line option
(the symptoms being that the restored VM would run but interrupts
were ignored).

Finally rename vgic_init_maps to vgic_init and renamed kvm_vgic_init to
kvm_vgic_map_resources.

  [ This patch is originally written by Peter Maydell, but I have
    modified it somewhat heavily, renaming various bits and moving code
    around.  If something is broken, I am to be blamed. - Christoffer ]

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-13 14:15:52 +01:00
Christian Borntraeger 7a72f7a140 KVM: track pid for VCPU only on KVM_RUN ioctl
We currently track the pid of the task that runs the VCPU in vcpu_load.
If a yield to that VCPU is triggered while the PID of the wrong thread
is active, the wrong thread might receive a yield, but this will most
likely not help the executing thread at all.  Instead, if we only track
the pid on the KVM_RUN ioctl, there are two possibilities:

1) the thread that did a non-KVM_RUN ioctl is holding a mutex that
the VCPU thread is waiting for.  In this case, the VCPU thread is not
runnable, but we also do not do a wrong yield.

2) the thread that did a non-KVM_RUN ioctl is sleeping, or doing
something that does not block the VCPU thread.  In this case, the
VCPU thread can receive the directed yield correctly.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Rik van Riel <riel@redhat.com>
CC: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
CC: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:13 +01:00
David Hildenbrand eed6e79d73 KVM: don't check for PF_VCPU when yielding
kvm_enter_guest() has to be called with preemption disabled and will
set PF_VCPU.  Current code takes PF_VCPU as a hint that the VCPU thread
is running and therefore needs no yield.

However, the check on PF_VCPU is wrong on s390, where preemption has
to stay enabled in order to correctly process page faults.  Thus,
s390 reenables preemption and starts to execute the guest.  The thread
might be scheduled out between kvm_enter_guest() and kvm_exit_guest(),
resulting in PF_VCPU being set but not being run.  When this happens,
the opportunity for directed yield is missed.

However, this check is done already in kvm_vcpu_on_spin before calling
kvm_vcpu_yield_loop:

        if (!ACCESS_ONCE(vcpu->preempted))
                continue;

so the check on PF_VCPU is superfluous in general, and this patch
removes it.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:12 +01:00
Igor Mammedov 9c1a5d3878 kvm: optimize GFN to memslot lookup with large slots amount
Current linear search doesn't scale well when
large amount of memslots is used and looked up slot
is not in the beginning memslots array.
Taking in account that memslots don't overlap, it's
possible to switch sorting order of memslots array from
'npages' to 'base_gfn' and use binary search for
memslot lookup by GFN.

As result of switching to binary search lookup times
are reduced with large amount of memslots.

Following is a table of search_memslot() cycles
during WS2008R2 guest boot.

                         boot,          boot + ~10 min
                         mostly same    of using it,
                         slot lookup    randomized lookup
                max      average        average
                cycles   cycles         cycles

13 slots      : 1450       28           30

13 slots      : 1400       30           40
binary search

117 slots     : 13000      30           460

117 slots     : 2000       35           180
binary search

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:11 +01:00
Igor Mammedov 0e60b0799f kvm: change memslot sorting rule from size to GFN
it will allow to use binary search for GFN -> memslot
lookups, reducing lookup cost with large slots amount.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:11 +01:00
Igor Mammedov 7f379cff11 kvm: update_memslots: drop not needed check for the same slot
UP/DOWN shift loops will shift array in needed
direction and stop at place where new slot should
be placed regardless of old slot size.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:09 +01:00
Igor Mammedov 5a38b6e6b4 kvm: update_memslots: drop not needed check for the same number of pages
if number of pages haven't changed sorting algorithm
will do nothing, so there is no need to do extra check
to avoid entering sorting logic.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:09 +01:00
Ard Biesheuvel d3fccc7ef8 kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn()
This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in
kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn.

The problem being addressed by the patch above was that some ARM code
based the memory mapping attributes of a pfn on the return value of
kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should
be mapped as device memory.

However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin,
and the existing non-ARM users were already using it in a way which
suggests that its name should probably have been 'kvm_is_reserved_pfn'
from the beginning, e.g., whether or not to call get_page/put_page on
it etc. This means that returning false for the zero page is a mistake
and the patch above should be reverted.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26 14:40:45 +01:00
Christoffer Dall 6b50f54064 arm/arm64: KVM: vgic: Fix error code in kvm_vgic_create()
If we detect another vCPU is running we just exit and return 0 as if we
succesfully created the VGIC, but the VGIC wouldn't actual be created.

This shouldn't break in-kernel behavior because the kernel will not
observe the failed the attempt to create the VGIC, but userspace could
be rightfully confused.

Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26 14:40:44 +01:00
Shannon Zhao 016ed39c54 arm/arm64: KVM: vgic: kick the specific vcpu instead of iterating through all
When call kvm_vgic_inject_irq to inject interrupt, we can known which
vcpu the interrupt for by the irq_num and the cpuid. So we should just
kick this vcpu to avoid iterating through all.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-11-26 10:19:37 +00:00
Christoffer Dall b1e952b4e4 arm/arm64: vgic: Remove unreachable irq_clear_pending
When 'injecting' an edge-triggered interrupt with a falling edge we
shouldn't clear the pending state on the distributor.  In fact, we
don't, because the check in vgic_validate_injection would prevent us
from ever reaching this bit of code.

Remove the unreachable snippet.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-11-25 13:57:28 +00:00
Ard Biesheuvel bf4bea8e9a kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn()
This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in
kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn.

The problem being addressed by the patch above was that some ARM code
based the memory mapping attributes of a pfn on the return value of
kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should
be mapped as device memory.

However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin,
and the existing non-ARM users were already using it in a way which
suggests that its name should probably have been 'kvm_is_reserved_pfn'
from the beginning, e.g., whether or not to call get_page/put_page on
it etc. This means that returning false for the zero page is a mistake
and the patch above should be reverted.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-11-25 13:57:26 +00:00
wanghaibin 7d39f9e32c KVM: ARM: VGIC: Optimize the vGIC vgic_update_irq_pending function.
When vgic_update_irq_pending with level-sensitive false, it is need to
deactivates an interrupt, and, it can go to out directly.
Here return a false value, because it will be not need to kick.

Signed-off-by: wanghaibin <wanghaibin.wang@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-11-25 13:57:26 +00:00
Radim Krčmář c274e03af7 kvm: x86: move assigned-dev.c and iommu.c to arch/x86/
Now that ia64 is gone, we can hide deprecated device assignment in x86.

Notable changes:
 - kvm_vm_ioctl_assigned_device() was moved to x86/kvm_arch_vm_ioctl()

The easy parts were removed from generic kvm code, remaining
 - kvm_iommu_(un)map_pages() would require new code to be moved
 - struct kvm_assigned_dev_kernel depends on struct kvm_irq_ack_notifier

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-23 18:33:36 +01:00
Paolo Bonzini 6ef768fac9 kvm: x86: move ioapic.c and irq_comm.c back to arch/x86/
ia64 does not need them anymore.  Ack notifiers become x86-specific
too.

Suggested-by: Gleb Natapov <gleb@kernel.org>
Reviewed-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-21 18:02:37 +01:00
Paolo Bonzini 003f7de625 KVM: ia64: remove
KVM for ia64 has been marked as broken not just once, but twice even,
and the last patch from the maintainer is now roughly 5 years old.
Time for it to rest in peace.

Acked-by: Gleb Natapov <gleb@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-20 11:08:33 +01:00
Paolo Bonzini 5cc1502799 kvm: simplify update_memslots invocation
The update_memslots invocation is only needed in one case.  Make
the code clearer by moving it to __kvm_set_memory_region, and
removing the wrapper around insert_memslot.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-17 12:16:13 +01:00
Paolo Bonzini f2a8103651 kvm: commonize allocation of the new memory slots
The two kmemdup invocations can be unified.  I find that the new
placement of the comment makes it easier to see what happens.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-17 12:15:34 +01:00
Paolo Bonzini 8593176c67 kvm: memslots: track id_to_index changes during the insertion sort
This completes the optimization from the previous patch, by
removing the KVM_MEM_SLOTS_NUM-iteration loop from insert_memslot.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-14 15:40:17 +01:00
Igor Mammedov 063584d443 kvm: memslots: replace heap sort with an insertion sort pass
memslots is a sorted array.  When a slot is changed, heapsort (lib/sort.c)
would take O(n log n) time to update it; an optimized insertion sort will
only cost O(n) on an array with just one item out of order.

Replace sort() with a custom sort that takes advantage of memslots usage
pattern and the known position of the changed slot.

performance change of 128 memslots insertions with gradually increasing
size (the worst case):

      heap sort   custom sort
max:  249747      2500 cycles

with custom sort alg taking ~98% less then original
update time.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-14 10:49:04 +01:00
Dominik Dingel 02d5d55b7e KVM: trivial fix comment regarding __kvm_set_memory_region
commit 72dc67a696 ("KVM: remove the usage of the mmap_sem for the protection of the memory slots.")
changed the lock which will be taken. This should be reflected in the function
commentary.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-03 12:07:30 +01:00
Nadav Amit 394457a928 KVM: x86: some apic broadcast modes does not work
KVM does not deliver x2APIC broadcast messages with physical mode.  Intel SDM
(10.12.9 ICR Operation in x2APIC Mode) states: "A destination ID value of
FFFF_FFFFH is used for broadcast of interrupts in both logical destination and
physical destination modes."

In addition, the local-apic enables cluster mode broadcast. As Intel SDM
10.6.2.2 says: "Broadcast to all local APICs is achieved by setting all
destination bits to one." This patch enables cluster mode broadcast.

The fix tries to combine broadcast in different modes through a unified code.

One rare case occurs when the source of IPI has its APIC disabled.  In such
case, the source can still issue IPIs, but since the source is not obliged to
have the same LAPIC mode as the enabled ones, we cannot rely on it.
Since it is a rare case, it is unoptimized and done on the slow-path.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Wanpeng Li <wanpeng.li@linux.intel.com>
[As per Radim's review, use unsigned int for X2APIC_BROADCAST, return bool from
 kvm_apic_broadcast. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-03 12:07:22 +01:00
Wanpeng Li 571ee1b685 kvm: vfio: fix unregister kvm_device_ops of vfio
After commit 80ce163 (KVM: VFIO: register kvm_device_ops dynamically),
kvm_device_ops of vfio can be registered dynamically. Commit 3c3c29fd
(kvm-vfio: do not use module_init) move the dynamic register invoked by
kvm_init in order to fix broke unloading of the kvm module. However,
kvm_device_ops of vfio is unregistered after rmmod kvm-intel module
which lead to device type collision detection warning after kvm-intel
module reinsmod.

    WARNING: CPU: 1 PID: 10358 at /root/cathy/kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:3289 kvm_init+0x234/0x282 [kvm]()
    Modules linked in: kvm_intel(O+) kvm(O) nfsv3 nfs_acl auth_rpcgss oid_registry nfsv4 dns_resolver nfs fscache lockd sunrpc pci_stub bridge stp llc autofs4 8021q cpufreq_ondemand ipv6 joydev microcode pcspkr igb i2c_algo_bit ehci_pci ehci_hcd e1000e i2c_i801 ixgbe ptp pps_core hwmon mdio tpm_tis tpm ipmi_si ipmi_msghandler acpi_cpufreq isci libsas scsi_transport_sas button dm_mirror dm_region_hash dm_log dm_mod [last unloaded: kvm_intel]
    CPU: 1 PID: 10358 Comm: insmod Tainted: G        W  O   3.17.0-rc1 #2
    Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013
     0000000000000cd9 ffff880ff08cfd18 ffffffff814a61d9 0000000000000cd9
     0000000000000000 ffff880ff08cfd58 ffffffff810417b7 ffff880ff08cfd48
     ffffffffa045bcac ffffffffa049c420 0000000000000040 00000000000000ff
    Call Trace:
     [<ffffffff814a61d9>] dump_stack+0x49/0x60
     [<ffffffff810417b7>] warn_slowpath_common+0x7c/0x96
     [<ffffffffa045bcac>] ? kvm_init+0x234/0x282 [kvm]
     [<ffffffff810417e6>] warn_slowpath_null+0x15/0x17
     [<ffffffffa045bcac>] kvm_init+0x234/0x282 [kvm]
     [<ffffffffa016e995>] vmx_init+0x1bf/0x42a [kvm_intel]
     [<ffffffffa016e7d6>] ? vmx_check_processor_compat+0x64/0x64 [kvm_intel]
     [<ffffffff810002ab>] do_one_initcall+0xe3/0x170
     [<ffffffff811168a9>] ? __vunmap+0xad/0xb8
     [<ffffffff8109c58f>] do_init_module+0x2b/0x174
     [<ffffffff8109d414>] load_module+0x43e/0x569
     [<ffffffff8109c6d8>] ? do_init_module+0x174/0x174
     [<ffffffff8109c75a>] ? copy_module_from_user+0x39/0x82
     [<ffffffff8109b7dd>] ? module_sect_show+0x20/0x20
     [<ffffffff8109d65f>] SyS_init_module+0x54/0x81
     [<ffffffff814a9a12>] system_call_fastpath+0x16/0x1b
    ---[ end trace 0626f4a3ddea56f3 ]---

The bug can be reproduced by:

    rmmod kvm_intel.ko
    insmod kvm_intel.ko

without rmmod/insmod kvm.ko
This patch fixes the bug by unregistering kvm_device_ops of vfio when the
kvm-intel module is removed.

Reported-by: Liu Rongrong <rongrongx.liu@intel.com>
Fixes: 3c3c29fd0d
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-24 13:30:47 +02:00
Quentin Casasnovas 3d32e4dbe7 kvm: fix excessive pages un-pinning in kvm_iommu_map error path.
The third parameter of kvm_unpin_pages() when called from
kvm_iommu_map_pages() is wrong, it should be the number of pages to un-pin
and not the page size.

This error was facilitated with an inconsistent API: kvm_pin_pages() takes
a size, but kvn_unpin_pages() takes a number of pages, so fix the problem
by matching the two.

This was introduced by commit 350b8bd ("kvm: iommu: fix the third parameter
of kvm_iommu_put_pages (CVE-2014-3601)"), which fixes the lack of
un-pinning for pages intended to be un-pinned (i.e. memory leak) but
unfortunately potentially aggravated the number of pages we un-pin that
should have stayed pinned. As far as I understand though, the same
practical mitigations apply.

This issue was found during review of Red Hat 6.6 patches to prepare
Ksplice rebootless updates.

Thanks to Vegard for his time on a late Friday evening to help me in
understanding this code.

Fixes: 350b8bd ("kvm: iommu: fix the third parameter of... (CVE-2014-3601)")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jamie Iles <jamie.iles@oracle.com>
Reviewed-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-24 13:30:37 +02:00
Linus Torvalds 8a5de18239 Second batch of changes for KVM/{arm,arm64} for 3.18
- Support for 48bit IPA and VA (EL2)
 - A number of fixes for devices mapped into guests
 - Yet another VGIC fix for BE
 - A fix for CPU hotplug
 - A few compile fixes (disabled VGIC, strict mm checks)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUQkyTAAoJECPQ0LrRPXpDwrUP/1WbELgB74W35CJ1zIc4KuBi
 unP1muW3QAr9Vmp/KovRKyLKFiRaTRlQsszaI78f4ZQ++0vzivU8dZwV81Gn1y/v
 0qF63OB0UYsOgXMRrh5JTEqzUyNyNBLUH+FAQiEO/srDoH5WLp3Zq7ThjzjwGn7Q
 K2ArxFiml+p2BGIGKWe3XIrxNgpW4oWhfe1kW4WU7sshuJlut3Nee+q2lSIg9mZx
 2VXYnLNzSsHizgQHuVEyXIqn8HA5FSCvjBYIUcLERlWB0I66WvzOqg9rH/BmNNR2
 H+cBDY+9D8KBUBG9zZSG7hZ0mAONKcOnxGZWGzte3Oi7FMZkB3Y/zrIs0na4iB5Y
 FxE8j+2qclZk9fkHQ7wn9Ws8hpGR2OrFlc2O5ZoBJJ2KJ4wMRHMeEbYRBCRQbTCN
 +81SUW7mh2j/La0JBqZ6DhhTiymUdIB+6v78im9WGlHsFRAIHBt0Q0u/pIyY+GJs
 OH7FoswI3vF5iODlHeRO1yjaO3rkj+IJwqTuUuhAIGu9+qnof3ge+eM1cOqrudNa
 u2kDz+BC21+Q8dflOF99Ryz7cMWqMiwtR+N+OUYpxc7RL7mCeHVANJxdWIFHKa2Z
 XJaHmbKjmw8AoR0fbS6YWOl2xmIhqU+FAngI+mow/Hz4pJDpR2K3w17ASXIVVQVX
 go2bvGHONkdn8Ji3Asap
 =3fl5
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-3.18-take-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm

Pull second batch of changes for KVM/{arm,arm64} from Marc Zyngier:
 "The most obvious thing is the sizeable MMU changes to support 48bit
  VAs on arm64.

  Summary:

   - support for 48bit IPA and VA (EL2)
   - a number of fixes for devices mapped into guests
   - yet another VGIC fix for BE
   - a fix for CPU hotplug
   - a few compile fixes (disabled VGIC, strict mm checks)"

[ I'm pulling directly from Marc at the request of Paolo Bonzini, whose
  backpack was stolen at Düsseldorf airport and will do new keys and
  rebuild his web of trust.    - Linus ]

* tag 'kvm-arm-for-3.18-take-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm:
  arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs
  arm: kvm: STRICT_MM_TYPECHECKS fix for user_mem_abort
  arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE
  arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2
  arm/arm64: KVM: map MMIO regions at creation time
  arm64: kvm: define PAGE_S2_DEVICE as read-only by default
  ARM: kvm: define PAGE_S2_DEVICE as read-only by default
  arm/arm64: KVM: add 'writable' parameter to kvm_phys_addr_ioremap
  arm/arm64: KVM: fix potential NULL dereference in user_mem_abort()
  arm/arm64: KVM: use __GFP_ZERO not memset() to get zeroed pages
  ARM: KVM: fix vgic-disabled build
  arm: kvm: fix CPU hotplug
2014-10-18 14:32:31 -07:00
Christoffer Dall 2df36a5dd6 arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs
The EIRSR and ELRSR registers are 32-bit registers on GICv2, and we
store these as an array of two such registers on the vgic vcpu struct.
However, we access them as a single 64-bit value or as a bitmap pointer
in the generic vgic code, which breaks BE support.

Instead, store them as u64 values on the vgic structure and do the
word-swapping in the assembly code, which already handles the byte order
for BE systems.

Tested-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-16 10:57:41 +02:00
Linus Torvalds 23971bdfff IOMMU Updates for Linux v3.18
This pull-request includes:
 
 	* Change in the IOMMU-API to convert the former iommu_domain_capable
 	  function to just iommu_capable
 
 	* Various fixes in handling RMRR ranges for the VT-d driver (one fix
 	  requires a device driver core change which was acked
 	  by Greg KH)
 
 	* The AMD IOMMU driver now assigns and deassigns complete alias groups
 	  to fix issues with devices using the wrong PCI request-id
 
 	* MMU-401 support for the ARM SMMU driver
 
 	* Multi-master IOMMU group support for the ARM SMMU driver
 
 	* Various other small fixes all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJUPNxYAAoJECvwRC2XARrjMwMP/RLSr+oA31rGVjLXcmcCHl7Q
 Uj7xpcnG19qB0aqNR1JeJuZNkK/tw44pE353MQPbz4N9UVUiogklGIVD1iJvFV53
 0qm84bvpDJIof4aP35B3H3Umft2USTn/lmsQg/RklQcNTW8DzNj63b8BTNR7k/GL
 G7bLg7F1BUCl0shZCCsFspOIulQPAJYN2OvHlfYBav/bfDvfouQ3lrV+loGrK44r
 F2Hmp+imXlIhUCjfbiWz6wKFxvPrxZx482vm2pXBCSnXEdW4/fz6nf9VHUK/Cfsq
 JAimY1CfiDo1aqH9/yVHUOw5SD/NYOXq6E5bFPg/WENbipbbae5cK2u6PX5MMBAn
 CG4BM8l9xicfGPqgn5YFSRY/6qC6K7NlxMnt9U8l18QIkDVDqEtUgJQISJuce7wx
 FWx6eSWaxpIe5yhq19/h2ELalUUyR/fPq+UXXjYDL1kLV/vcvC/lC3mbNAQU93zU
 WK0bG2tDg88JHavc25Ewa2aOn4BVM2BpwuLbYlgQReaEmsQRnEPgtmRNyLJHqbFE
 wwpCj8pBWdufsJWRyvpnXQ+CfA7oSz4e7hz1G+0/5uiDmagfvg16Ql5JtPmmuLUm
 Kc3dVIiG0s1ewohZIIJETGCqprQbCSqs8CCQqB6p2zDBWFKpNT7F38lm/KlehkCz
 JpAiI7Y2K9Jejp0VIPrt
 =OMOt
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "This pull-request includes:

   - change in the IOMMU-API to convert the former iommu_domain_capable
     function to just iommu_capable

   - various fixes in handling RMRR ranges for the VT-d driver (one fix
     requires a device driver core change which was acked by Greg KH)

   - the AMD IOMMU driver now assigns and deassigns complete alias
     groups to fix issues with devices using the wrong PCI request-id

   - MMU-401 support for the ARM SMMU driver

   - multi-master IOMMU group support for the ARM SMMU driver

   - various other small fixes all over the place"

* tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits)
  iommu/vt-d: Work around broken RMRR firmware entries
  iommu/vt-d: Store bus information in RMRR PCI device path
  iommu/vt-d: Only remove domain when device is removed
  driver core: Add BUS_NOTIFY_REMOVED_DEVICE event
  iommu/amd: Fix devid mapping for ivrs_ioapic override
  iommu/irq_remapping: Fix the regression of hpet irq remapping
  iommu: Fix bus notifier breakage
  iommu/amd: Split init_iommu_group() from iommu_init_device()
  iommu: Rework iommu_group_get_for_pci_dev()
  iommu: Make of_device_id array const
  amd_iommu: do not dereference a NULL pointer address.
  iommu/omap: Remove omap_iommu unused owner field
  iommu: Remove iommu_domain_has_cap() API function
  IB/usnic: Convert to use new iommu_capable() API function
  vfio: Convert to use new iommu_capable() API function
  kvm: iommu: Convert to use new iommu_capable() API function
  iommu/tegra: Convert to iommu_capable() API function
  iommu/msm: Convert to iommu_capable() API function
  iommu/vt-d: Convert to iommu_capable() API function
  iommu/fsl: Convert to iommu_capable() API function
  ...
2014-10-15 07:23:49 +02:00
Ard Biesheuvel c40f2f8ff8 arm/arm64: KVM: add 'writable' parameter to kvm_phys_addr_ioremap
Add support for read-only MMIO passthrough mappings by adding a
'writable' parameter to kvm_phys_addr_ioremap. For the moment,
mappings will be read-write even if 'writable' is false, but once
the definition of PAGE_S2_DEVICE gets changed, those mappings will
be created read-only.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 13:07:37 +02:00
Linus Torvalds 80213c03c4 PCI changes for the v3.18 merge window:
Enumeration
     - Check Vendor ID only for Config Request Retry Status (Rajat Jain)
     - Enable Config Request Retry Status when supported (Rajat Jain)
     - Add generic domain handling (Catalin Marinas)
     - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado)
 
   Resource management
     - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu)
     - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr)
 
   PCI device hotplug
     - Prevent NULL dereference during pciehp probe (Andreas Noever)
     - Move _HPP & _HPX handling into core (Bjorn Helgaas)
     - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas)
     - Apply _HPP/_HPX to display devices (Bjorn Helgaas)
     - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas)
     - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas)
     - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas)
     - Fix wait time in pciehp timeout message (Yinghai Lu)
     - Add more pciehp Slot Control debug output (Yinghai Lu)
     - Stop disabling pciehp notifications during init (Yinghai Lu)
 
   MSI
     - Remove arch_msi_check_device() (Alexander Gordeev)
     - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev)
     - Move D0 check into pci_msi_check_device() (Alexander Gordeev)
     - Remove unused kobject from struct msi_desc (Yijing Wang)
     - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang)
     - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang)
     - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang)
     - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang)
     - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang)
 
   Power management
     - Drop unused runtime PM support code for PCIe ports (Rafael J.  Wysocki)
     - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki)
 
   AER
     - Add additional AER error strings (Gong Chen)
     - Make <linux/aer.h> standalone includable (Thierry Reding)
 
   Virtualization
     - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson)
     - Add ACS quirk for Intel 10G NICs (Alex Williamson)
     - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp)
     - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson)
     - Add device flag helpers (Ethan Zhao)
     - Assume all Mellanox devices have broken INTx masking (Gavin Shan)
 
   Generic host bridge driver
     - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau)
     - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau)
     - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau)
     - Fix the conversion of IO ranges into IO resources (Liviu Dudau)
     - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau)
     - Add support for parsing PCI host bridge resources from DT (Liviu Dudau)
     - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau)
     - Add arm64 architectural support for PCI (Liviu Dudau)
 
   APM X-Gene
     - Add APM X-Gene PCIe driver (Tanmay Inamdar)
     - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar)
 
   Freescale i.MX6
     - Probe in module_init(), not fs_initcall() (Lucas Stach)
     - Delay enabling reference clock for SS until it stabilizes (Tim Harvey)
 
   Marvell MVEBU
     - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni)
 
   NVIDIA Tegra
     - Make sure the PCIe PLL is really reset (Eric Yuen)
     - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang)
     - Fix extended configuration space mapping (Peter Daifuku)
     - Implement resource hierarchy (Thierry Reding)
     - Clear CLKREQ# enable on port disable (Thierry Reding)
     - Add Tegra124 support (Thierry Reding)
 
   ST Microelectronics SPEAr13xx
     - Pass config resource through reg property (Pratyush Anand)
 
   Synopsys DesignWare
     - Use NULL instead of false (Fabio Estevam)
     - Parse bus-range property from devicetree (Lucas Stach)
     - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach)
     - Remove pci_assign_unassigned_resources() (Lucas Stach)
     - Check private_data validity in single place (Lucas Stach)
     - Setup and clear exactly one MSI at a time (Lucas Stach)
     - Remove open-coded bitmap operations (Lucas Stach)
     - Fix configuration base address when using 'reg' (Minghuan Lian)
     - Fix IO resource end address calculation (Minghuan Lian)
     - Rename get_msi_data() to get_msi_addr() (Minghuan Lian)
     - Add get_msi_data() to pcie_host_ops (Minghuan Lian)
     - Add support for v3.65 hardware (Murali Karicheri)
     - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand)
 
   TI Keystone
     - Add TI Keystone PCIe driver (Murali Karicheri)
     - Limit MRSS for all downstream devices (Murali Karicheri)
     - Assume controller is already in RC mode (Murali Karicheri)
     - Set device ID based on SoC to support multiple ports (Murali Karicheri)
 
   Xilinx AXI
     - Add Xilinx AXI PCIe driver (Srikanth Thokala)
     - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter)
 
   Miscellaneous
     - Clean up whitespace (Quentin Lambert)
     - Remove assignments from "if" conditions (Quentin Lambert)
     - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri)
     - x86: Mark DMI tables as initialization data (Mathias Krause)
     - x86: Move __init annotation to the correct place (Mathias Krause)
     - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause)
     - x86: Constify pci_mmcfg_probes[] array (Mathias Krause)
     - x86: Mark PCI BIOS initialization code as such (Mathias Krause)
     - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya)
     - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUNWmJAAoJEFmIoMA60/r8GncP/3uHRoBrnaF6pv+S1l1p3Fs/
 l1kKH91/IuAAU7VJX8pkNybFqx02topWmiVVXAzqvD01PcRLGCLjPbWl5h+y5/Ja
 CHZH33AwHAmm0kt4BrOSOeHTLJhAigly2zV3P4F8jRIgyaeMoGZ6Ko4tkQUpm21k
 +ohrOd4cxYkmzzCjKwsZZhKnyRNpae8FmTk3VQBPuN8DbhvFPrqo5/+GeAdSZTdS
 HZHpfl2HL4095aY7uBVsZqNkjQyl6SnWwjkjLnuI8q3qA3BLgDZE/Jr8F/MNuW1V
 y01JIjerFWMDFyBIkpg7moYnODy6oP3KvczwYdKGmqsJja+0MQvYhLTwD+R/yTQS
 SewJA0mL3T3EJEfnFYkCiaIX27xIwk/FxHfaKPN91xgx/QM7xCVZNrU2/dXjhoX1
 GqLKxOEaFHhWWTyT5Dj27I0ZcElzFZ3tIwvrHfs8y22oAuAlsAypaUgvUwRfL4CO
 hOj4ITZa0t041sYWqxCoGAA9Fdp8HMzNKKS5F4mhADz4Ad9v6uPCNv/s/RoxVsbm
 jhZOtPYJ0/iCA+kNVX563S8Z3VpfPI+7bBjcj2WKdzW+IlICvOKT+kvwL2Tv/rE7
 w0hrNsbkgGsYbPldMx7LwCavsUtYFuNj0zoU6vkhP2jk6O2Tn5VXDmjrXH0v3iHI
 v03vlUtre0bQ26fzDyLQ
 =4Zv1
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "The interesting things here are:

   - Turn on Config Request Retry Status Software Visibility.  This
     caused hangs last time, but we included a fix this time.
   - Rework PCI device configuration to use _HPP/_HPX more aggressively
   - Allow PCI devices to be put into D3cold during system suspend
   - Add arm64 PCI support
   - Add APM X-Gene host bridge driver
   - Add TI Keystone host bridge driver
   - Add Xilinx AXI host bridge driver

  More detailed summary:

  Enumeration
    - Check Vendor ID only for Config Request Retry Status (Rajat Jain)
    - Enable Config Request Retry Status when supported (Rajat Jain)
    - Add generic domain handling (Catalin Marinas)
    - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado)

  Resource management
    - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu)
    - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr)

  PCI device hotplug
    - Prevent NULL dereference during pciehp probe (Andreas Noever)
    - Move _HPP & _HPX handling into core (Bjorn Helgaas)
    - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas)
    - Apply _HPP/_HPX to display devices (Bjorn Helgaas)
    - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas)
    - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas)
    - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas)
    - Fix wait time in pciehp timeout message (Yinghai Lu)
    - Add more pciehp Slot Control debug output (Yinghai Lu)
    - Stop disabling pciehp notifications during init (Yinghai Lu)

  MSI
    - Remove arch_msi_check_device() (Alexander Gordeev)
    - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev)
    - Move D0 check into pci_msi_check_device() (Alexander Gordeev)
    - Remove unused kobject from struct msi_desc (Yijing Wang)
    - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang)
    - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang)
    - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang)
    - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang)
    - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang)

  Power management
    - Drop unused runtime PM support code for PCIe ports (Rafael J.  Wysocki)
    - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki)

  AER
    - Add additional AER error strings (Gong Chen)
    - Make <linux/aer.h> standalone includable (Thierry Reding)

  Virtualization
    - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson)
    - Add ACS quirk for Intel 10G NICs (Alex Williamson)
    - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp)
    - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson)
    - Add device flag helpers (Ethan Zhao)
    - Assume all Mellanox devices have broken INTx masking (Gavin Shan)

  Generic host bridge driver
    - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau)
    - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau)
    - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau)
    - Fix the conversion of IO ranges into IO resources (Liviu Dudau)
    - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau)
    - Add support for parsing PCI host bridge resources from DT (Liviu Dudau)
    - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau)
    - Add arm64 architectural support for PCI (Liviu Dudau)

  APM X-Gene
    - Add APM X-Gene PCIe driver (Tanmay Inamdar)
    - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar)

  Freescale i.MX6
    - Probe in module_init(), not fs_initcall() (Lucas Stach)
    - Delay enabling reference clock for SS until it stabilizes (Tim Harvey)

  Marvell MVEBU
    - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni)

  NVIDIA Tegra
    - Make sure the PCIe PLL is really reset (Eric Yuen)
    - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang)
    - Fix extended configuration space mapping (Peter Daifuku)
    - Implement resource hierarchy (Thierry Reding)
    - Clear CLKREQ# enable on port disable (Thierry Reding)
    - Add Tegra124 support (Thierry Reding)

  ST Microelectronics SPEAr13xx
    - Pass config resource through reg property (Pratyush Anand)

  Synopsys DesignWare
    - Use NULL instead of false (Fabio Estevam)
    - Parse bus-range property from devicetree (Lucas Stach)
    - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach)
    - Remove pci_assign_unassigned_resources() (Lucas Stach)
    - Check private_data validity in single place (Lucas Stach)
    - Setup and clear exactly one MSI at a time (Lucas Stach)
    - Remove open-coded bitmap operations (Lucas Stach)
    - Fix configuration base address when using 'reg' (Minghuan Lian)
    - Fix IO resource end address calculation (Minghuan Lian)
    - Rename get_msi_data() to get_msi_addr() (Minghuan Lian)
    - Add get_msi_data() to pcie_host_ops (Minghuan Lian)
    - Add support for v3.65 hardware (Murali Karicheri)
    - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand)

  TI Keystone
    - Add TI Keystone PCIe driver (Murali Karicheri)
    - Limit MRSS for all downstream devices (Murali Karicheri)
    - Assume controller is already in RC mode (Murali Karicheri)
    - Set device ID based on SoC to support multiple ports (Murali Karicheri)

  Xilinx AXI
    - Add Xilinx AXI PCIe driver (Srikanth Thokala)
    - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter)

  Miscellaneous
    - Clean up whitespace (Quentin Lambert)
    - Remove assignments from "if" conditions (Quentin Lambert)
    - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri)
    - x86: Mark DMI tables as initialization data (Mathias Krause)
    - x86: Move __init annotation to the correct place (Mathias Krause)
    - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause)
    - x86: Constify pci_mmcfg_probes[] array (Mathias Krause)
    - x86: Mark PCI BIOS initialization code as such (Mathias Krause)
    - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya)
    - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)"

* tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits)
  arm64: dts: Add APM X-Gene PCIe device tree nodes
  PCI: Add ACS quirk for AMD A88X southbridge devices
  PCI: xgene: Add APM X-Gene PCIe driver
  PCI: designware: Remove open-coded bitmap operations
  PCI/MSI: Remove unnecessary temporary variable
  PCI/MSI: Use __write_msi_msg() instead of write_msi_msg()
  MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg()
  PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg()
  PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints
  PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib
  PCI/MSI: Remove unused kobject from struct msi_desc
  PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported()
  PCI/MSI: Move D0 check into pci_msi_check_device()
  PCI/MSI: Remove arch_msi_check_device()
  irqchip: armada-370-xp: Remove arch_msi_check_device()
  PCI/MSI/PPC: Remove arch_msi_check_device()
  arm64: Add architectural support for PCI
  PCI: Add pci_remap_iospace() to map bus I/O resources
  of/pci: Add support for parsing PCI host bridge resources from DT
  of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr()
  ...

Conflicts:
	arch/arm64/boot/dts/apm-storm.dtsi
2014-10-09 15:03:49 -04:00
Linus Torvalds e4e65676f2 Fixes and features for 3.18.
Apart from the usual cleanups, here is the summary of new features:
 
 - s390 moves closer towards host large page support
 
 - PowerPC has improved support for debugging (both inside the guest and
   via gdbstub) and support for e6500 processors
 
 - ARM/ARM64 support read-only memory (which is necessary to put firmware
   in emulated NOR flash)
 
 - x86 has the usual emulator fixes and nested virtualization improvements
   (including improved Windows support on Intel and Jailhouse hypervisor
   support on AMD), adaptive PLE which helps overcommitting of huge guests.
   Also included are some patches that make KVM more friendly to memory
   hot-unplug, and fixes for rare caching bugs.
 
 Two patches have trivial mm/ parts that were acked by Rik and Andrew.
 
 Note: I will soon switch to a subkey for signing purposes.  To verify
 future signed pull requests from me, please update my key with
 "gpg --recv-keys 9B4D86F2".  You should see 3 new subkeys---the
 one for signing will be a 2048-bit RSA key, 4E6B09D7.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJUL5sPAAoJEBvWZb6bTYbyfkEP/3MNhSyn6HCjPjtjLNPAl9KL
 WpExZSUFL2+4CztpdGIsek1BeJYHmqv3+c5S+WvaWVA1aqh2R7FT1D1ErBLjgLQq
 lq23IOr+XxmC3dXQUEEk+TlD+283UzypzEG4l4UD3JYg79fE3UrXAz82SeyewJDY
 x7aPYhkZG3RHu+wAyMPasG6E3zS5LySdUtGWbiPwz5BejrhBJoJdeb2WIL/RwnUK
 7ppSLB5EoFj/uMkuyeAAdAbdfSrhHA6faDZxNdxS9k9wGutrhhfUoQ49ONrKG4dV
 sFo1tSPTVgRs8QFYUZ2fJUPBAmUVddsgqh2K9d0NftGTq7b8YszaCsfFrs2/Y4MU
 YxssWEhxsfszerCu12bbAJrv6JBZYQ7TwGvI9L7P0iFU6IVw/djmukU4AkM9/e91
 YS/cue/PN+9Pn2ccXzL9J7xRtZb8FsOuRsCXTCmbOwDkLmrKPDBN2t3RUbeF+Eam
 ABrpWnLKX13kZSo4LKU+/niarzmPMp7odQfHVdr8ea0fiYLp4iN8puA20WaSPIgd
 CLvm+RAvXe5Lm91L4mpFotJ2uFyK6QlIYJV4FsgeWv/0D0qppWQi0Utb/aCNHCgy
 z8MyUMD48y7EpoQrFYr/7cddXIu0/NegnM8I1coVjIPEk4NfeebGUlCJ/V3D8wMG
 BgEfS2x6jRc5zB3hjwDr
 =iEVi
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "Fixes and features for 3.18.

  Apart from the usual cleanups, here is the summary of new features:

   - s390 moves closer towards host large page support

   - PowerPC has improved support for debugging (both inside the guest
     and via gdbstub) and support for e6500 processors

   - ARM/ARM64 support read-only memory (which is necessary to put
     firmware in emulated NOR flash)

   - x86 has the usual emulator fixes and nested virtualization
     improvements (including improved Windows support on Intel and
     Jailhouse hypervisor support on AMD), adaptive PLE which helps
     overcommitting of huge guests.  Also included are some patches that
     make KVM more friendly to memory hot-unplug, and fixes for rare
     caching bugs.

  Two patches have trivial mm/ parts that were acked by Rik and Andrew.

  Note: I will soon switch to a subkey for signing purposes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (157 commits)
  kvm: do not handle APIC access page if in-kernel irqchip is not in use
  KVM: s390: count vcpu wakeups in stat.halt_wakeup
  KVM: s390/facilities: allow TOD-CLOCK steering facility bit
  KVM: PPC: BOOK3S: HV: CMA: Reserve cma region only in hypervisor mode
  arm/arm64: KVM: Report correct FSC for unsupported fault types
  arm/arm64: KVM: Fix VTTBR_BADDR_MASK and pgd alloc
  kvm: Fix kvm_get_page_retry_io __gup retval check
  arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset
  kvm: x86: Unpin and remove kvm_arch->apic_access_page
  kvm: vmx: Implement set_apic_access_page_addr
  kvm: x86: Add request bit to reload APIC access page address
  kvm: Add arch specific mmu notifier for page invalidation
  kvm: Rename make_all_cpus_request() to kvm_make_all_cpus_request() and make it non-static
  kvm: Fix page ageing bugs
  kvm/x86/mmu: Pass gfn and level to rmapp callback.
  x86: kvm: use alternatives for VMCALL vs. VMMCALL if kernel text is read-only
  kvm: x86: use macros to compute bank MSRs
  KVM: x86: Remove debug assertion of non-PAE reserved bits
  kvm: don't take vcpu mutex for obviously invalid vcpu ioctls
  kvm: Faults which trigger IO release the mmap_sem
  ...
2014-10-08 05:27:39 -04:00
Joerg Roedel 09b5269a1b Merge branches 'arm/exynos', 'arm/omap', 'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next
Conflicts:
	drivers/iommu/arm-smmu.c
2014-10-02 12:24:45 +02:00
Paolo Bonzini e77d99d4a4 Changes for KVM for arm/arm64 for 3.18
This includes a bunch of changes:
  - Support read-only memory slots on arm/arm64
  - Various changes to fix Sparse warnings
  - Correctly detect write vs. read Stage-2 faults
  - Various VGIC cleanups and fixes
  - Dynamic VGIC data strcuture sizing
  - Fix SGI set_clear_pend offset bug
  - Fix VTTBR_BADDR Mask
  - Correctly report the FSC on Stage-2 faults
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUJWAdAAoJEEtpOizt6ddy9cMH+gIoUPnRJLe+PPcOOyxOx6pr
 +CnD/zAd0sLvxZLP/LBOzu99H3YrbO5kwI/172/8G1zUNI2hp6YxEEJaBCTHrz6l
 RwgLy7a3EMMY51nJo5w2dkFUo8cUX9MsHqMpl2Xb7Dvo2ZHp+nDqRjwRY6yi+t4V
 dWSJTRG6X+DIWyysij6jBtfKU6MpU+4NW3Zdk1fapf8QDkn+cBtV5X2QcmERCaIe
 A1j9hiGi43KA3XWeeePU3aVaxC2XUhTayP8VsfVxoNG2manaS6lqjmbif5ghs/0h
 rw7R3/Aj0MJny2zT016MkvKJKRukuVRD6e1lcYghqnSJhL2FossowZ9fHRADpqU=
 =QgU8
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next

Changes for KVM for arm/arm64 for 3.18

This includes a bunch of changes:
 - Support read-only memory slots on arm/arm64
 - Various changes to fix Sparse warnings
 - Correctly detect write vs. read Stage-2 faults
 - Various VGIC cleanups and fixes
 - Dynamic VGIC data strcuture sizing
 - Fix SGI set_clear_pend offset bug
 - Fix VTTBR_BADDR Mask
 - Correctly report the FSC on Stage-2 faults

Conflicts:
	virt/kvm/eventfd.c
	[duplicate, different patch where the kvm-arm version broke x86.
	 The kvm tree instead has the right one]
2014-09-27 11:03:33 +02:00
Andres Lagar-Cavilla bb0ca6acd4 kvm: Fix kvm_get_page_retry_io __gup retval check
Confusion around -EBUSY and zero (inside a BUG_ON no less).

Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-26 10:21:29 +02:00
Christoffer Dall 0fea6d7628 arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset
The sgi values calculated in read_set_clear_sgi_pend_reg() and
write_set_clear_sgi_pend_reg() were horribly incorrectly multiplied by 4
with catastrophic results in that subfunctions ended up overwriting
memory not allocated for the expected purpose.

This showed up as bugs in kfree() and the kernel complaining a lot of
you turn on memory debugging.

This addresses: http://marc.info/?l=kvm&m=141164910007868&w=2

Reported-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-25 19:38:25 +02:00
Joerg Roedel ee5ba30ff7 kvm: iommu: Convert to use new iommu_capable() API function
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-09-25 15:47:38 +02:00
Tang Chen fe71557afb kvm: Add arch specific mmu notifier for page invalidation
This will be used to let the guest run while the APIC access page is
not pinned.  Because subsequent patches will fill in the function
for x86, place the (still empty) x86 implementation in the x86.c file
instead of adding an inline function in kvm_host.h.

Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:07:59 +02:00
Tang Chen 445b823695 kvm: Rename make_all_cpus_request() to kvm_make_all_cpus_request() and make it non-static
Different architectures need different requests, and in fact we
will use this function in architecture-specific code later. This
will be outside kvm_main.c, so make it non-static and rename it to
kvm_make_all_cpus_request().

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:07:59 +02:00
Andres Lagar-Cavilla 5712846808 kvm: Fix page ageing bugs
1. We were calling clear_flush_young_notify in unmap_one, but we are
within an mmu notifier invalidate range scope. The spte exists no more
(due to range_start) and the accessed bit info has already been
propagated (due to kvm_pfn_set_accessed). Simply call
clear_flush_young.

2. We clear_flush_young on a primary MMU PMD, but this may be mapped
as a collection of PTEs by the secondary MMU (e.g. during log-dirty).
This required expanding the interface of the clear_flush_young mmu
notifier, so a lot of code has been trivially touched.

3. In the absence of shadow_accessed_mask (e.g. EPT A bit), we emulate
the access bit by blowing the spte. This requires proper synchronizing
with MMU notifier consumers, like every other removal of spte's does.

Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:07:58 +02:00
David Matlack 2ea75be321 kvm: don't take vcpu mutex for obviously invalid vcpu ioctls
vcpu ioctls can hang the calling thread if issued while a vcpu is running.
However, invalid ioctls can happen when userspace tries to probe the kind
of file descriptors (e.g. isatty() calls ioctl(TCGETS)); in that case,
we know the ioctl is going to be rejected as invalid anyway and we can
fail before trying to take the vcpu mutex.

This patch does not change functionality, it just makes invalid ioctls
fail faster.

Cc: stable@vger.kernel.org
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:07:55 +02:00