DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to use
it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to cover
some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'
-----BEGIN PGP SIGNATURE-----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=YzNN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
The undocumented compatibles in the examples are down to just a few
left. Turn on the warning by default. The increased visibility should
get the remaining warnings fixed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231128221008.4050638-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 5e3ef45468 ("dt-bindings: ignore paths outside kernel for
DT_SCHEMA_FILES") anchored all searches to the bindings directory
(since bindings only exist below that), but it turns out this is not
always desired.
Just anchor to the base kernel source directory and while at it, break
the overly long line for legibility.
Reported-by: Michal Simek <michal.simek@amd.com>
Fixes: 5e3ef45468 ("dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES")
Closes: https://lore.kernel.org/all/827695c3-bb33-4a86-8586-2c7323530398@amd.com/
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240116062731.2810067-1-git@andred.net
Signed-off-by: Rob Herring <robh@kernel.org>
If the location of the kernel sources contains the string that we're
filtering for using DT_SCHEMA_FILES, then all schemas will currently be
matched, returned and checked, not just the ones we actually expected.
As an example, if the kernel sources happen to be below a directory
'google', and DT_SCHEMA_FILES=google, everything is checked. More
common examples might be having the sources below people's home
directories that contain the string st or arm and then searching for
those. The list is endless.
Fix this by only matching for schemas below the kernel source's
bindings directory.
Note that I opted for the implementation here so as to not having to
deal with escaping DT_SCHEMA_FILES, which would have been the
alternative if the grep match itself had been updated.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20231220145537.2163811-1-andre.draszik@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The common reserved-memory bindings have recently been copied from the
kernel tree into dtschema. The preference is to host common, stable
bindings in dtschema. As reserved-memory is documented in the DT Spec,
it meets the criteria.
The v2023.09 version of dtschema is what contains the reserved-memory
schemas we depend on, so bump the minimum version to that. Otherwise,
references to these schemas will generate errors.
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20231013200851.347042-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
DT_SCHEMA_FILES used to allow specifying a space separated list of file
paths, but the introduction of partial matches support broke this
feature:
$ make dtbs_check DT_SCHEMA_FILES="path/to/schema1.yaml path/to/schema2.yaml"
[...]
LINT Documentation/devicetree/bindings
usage: yamllint [-h] [-] [-c CONFIG_FILE | -d CONFIG_DATA] [--list-files] [...]
[-v]
[FILE_OR_DIR ...]
yamllint: error: one of the arguments FILE_OR_DIR - is required
[...]
Restore the lost functionality by preparing a grep filter that is able
to handle multiple search patterns.
Additionally, as suggested by Rob, use ':' instead of ' ' as the
patterns separator char. Hence, the command above becomes:
$ make dtbs_check DT_SCHEMA_FILES="path/to/schema1.yaml:path/to/schema2.yaml"
Fixes: 309d955985 ("dt-bindings: kbuild: Support partial matches with DT_SCHEMA_FILES")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230209193735.795288-1-cristian.ciocaltea@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add a make target, dt_compatible_check, to extract compatible strings
from kernel sources and check if they are documented by a schema.
At least version v2022.08 of dtschema with dt-check-compatible is
required.
This check can also be run manually on specific files or directories:
scripts/dtc/dt-extract-compatibles drivers/clk/ | \
xargs dt-check-compatible -v -s Documentation/devicetree/bindings/processed-schema.json
Currently, there are about 3800 undocumented compatible strings. Most of
these are cases where the binding is not yet converted (given there
are 1900 .txt binding files remaining).
Link: https://lore.kernel.org/all/20220916012510.2718170-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
Since commit ef8795f3f1 ("dt-bindings: kbuild: Use DTB files for
validation"), dt-mk-schema always needs a complete list of schemas, so
the conditional using DT_MK_SCHEMA_FLAGS should be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220727211100.3249417-1-robh@kernel.org
A recent change added a warning when yamllint is not installed, as it is
needed for 'make dt_binding_check'. However, it also changed
DT_SCHEMA_LINT to be a simple make variable, which is evaluated when a
Makefile is evaluated. This causes a warning when running 'make clean',
as Documentation/devicetree/bindings/Makefile has a "clean-files"
variable:
$ make -s clean
which: no yamllint in (...)
warning: python package 'yamllint' not installed, skipping
Make DT_SCHEMA_LINT a recursive variable so it is evaluated only when it
is used. The warning still triggers when 'make dt_binding_check' is run.
Fixes: b3e664a7f4 ("dt-bindings: kbuild: Print a warning if yamllint is not found")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220315202542.2071351-1-nathan@kernel.org
Switch the DT validation to use DTB files directly instead of a DTS to
YAML conversion.
The original motivation for supporting validation on DTB files was to
enable running validation on a running system (e.g. 'dt-validate
/sys/firmware/fdt') or other cases where the original source DTS is not
available.
The YAML format was not without issues. Using DTBs with the schema type
information solves some of those problems. The YAML format relies on the
DTS source level information including bracketing of properties, size
directives, and phandle tags all of which are lost in a DTB file. While
standardizing the bracketing is a good thing, it does cause a lot of
extra warnings and churn to fix them.
Another issue has been signed types are not validated correctly as sign
information is not propagated to YAML. Using the schema type information
allows for proper handling of signed types. YAML also can't represent
the full range of 64-bit integers as numbers are stored as floats by
most/all parsers.
The DTB validation works by decoding property values using the type
information in the schemas themselves. The main corner case this does
not work for is matrix types where neither dimension is fixed. For
now, checking the dimensions in these cases are skipped.
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220310160513.1708182-3-robh@kernel.org
In preparation for supporting validation of DTB files, the full
processed schema will always be needed in order to extract type
information from it. Therefore, the processed schema containing only
what DT_SCHEMA_FILES specifies won't work. Instead, dt-validate has
gained an option, -l or --limit, to specify which schema(s) to use for
validation.
As the command line option is new, we the minimum dtschema version must be
updated.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220310160513.1708182-2-robh@kernel.org
Running yamllint is effectively required for binding schemas, so print a
warning if not found rather than silently skipping running it.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220303221417.2486268-1-robh@kernel.org
DT_SCHEMA_FILES is currently restricted to a list of exact files with
the full source tree path (i.e. Documentation/devicetree/bindings/...).
Loosen this requirement and let DT_SCHEMA_FILES be a partial match.
With this, checking all schema files in a directory is possible:
$ make DT_SCHEMA_FILES=/gpio/ dt_binding_check
Or all schema files with 'qcom' in the path or filename:
$ make DT_SCHEMA_FILES=qcom dt_binding_check
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220228201006.1484903-1-robh@kernel.org
There are valid cases when two nodes can have the same address. For
example, in Exynos SoCs there is USI IP-core, which might be configured
to provide UART, SPI or I2C block, all of which having the same base
register address. But only one can be enabled at a time. That looks like
this:
usi@138200c0 {
serial@13820000 {
status = "okay";
};
i2c@13820000 {
status = "disabled";
};
};
When running "make dt_binding_check", it reports next warning:
Warning (unique_unit_address):
/example-0/usi@138200c0/serial@13820000:
duplicate unit-address (also used in node
/example-0/usi@138200c0/i2c@13820000)
Disable "unique_unit_address" in DTC_FLAGS to suppress warnings like
that, but enable "unique_unit_address_if_enabled" warning, so that dtc
still reports a warning when two enabled nodes are having the same
address.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211203183517.11390-1-semen.protsenko@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The dtschema version check works, but is not that clear when dtschema is
either not installed or not in the PATH. Add a separate check and
message if dt-doc-validate is not found.
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Setting DT_SCHEMA_FILES allows the user to restrict the
"dt_binding_check" make target to a specified set of DT binding files.
However, yamllint is still run on all available files, which not only
takes time, but also outputs warnings for other binding files the
developer is not interested in.
Fix this by renaming "find_cmd" to "find_all_cmd", introducing a new
"find_cmd" to only return the files specified by DT_SCHEMA_FILES (if
present), and using the latter for yamllint and dt-doc-validate.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/174ab1d791b7bc65f3b0f11b72be13af1748c731.1634551582.git.geert+renesas@glider.be
[robh: Also use only DT_SCHEMA_FILES for dt-doc-validate]
Signed-off-by: Rob Herring <robh@kernel.org>
Use xargs sharding like "chk_bindings" does, to parallelize the
execution of yamllint.
This reduces the yamllint execution time from ca. 21 to 5 seconds on
i7-8700K.
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c68bdbdf3112c4658e0748c8fc51959e69fbae2e.1634551582.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
- Evaluate $(call cc-option,...) etc. only for build targets
- Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux
- Remove unnecessary --gcc-toolchains Clang flag because the --prefix
flag finds the toolchains
- Do not pass Clang's --prefix flag when using the integrated as
- Check the assembler version in Kconfig time
- Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
some dependencies in Kconfig
- Fix invalid Module.symvers creation when building only modules without
vmlinux
- Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
set, but there is no module to build
- Refactor module installation Makefile
- Support zstd for module compression
- Convert alpha and ia64 to use generic shell scripts to generate the
syscall headers
- Add a new elfnote to indicate if the kernel was built with LTO, which
will be used by pahole
- Flatten the directory structure under include/config/ so CONFIG options
and filenames match
- Change the deb source package name from linux-$(KERNELRELEASE) to
linux-upstream
-----BEGIN PGP SIGNATURE-----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=ti9L
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Evaluate $(call cc-option,...) etc. only for build targets
- Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux
- Remove unnecessary --gcc-toolchains Clang flag because the --prefix
flag finds the toolchains
- Do not pass Clang's --prefix flag when using the integrated as
- Check the assembler version in Kconfig time
- Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
some dependencies in Kconfig
- Fix invalid Module.symvers creation when building only modules
without vmlinux
- Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
set, but there is no module to build
- Refactor module installation Makefile
- Support zstd for module compression
- Convert alpha and ia64 to use generic shell scripts to generate the
syscall headers
- Add a new elfnote to indicate if the kernel was built with LTO, which
will be used by pahole
- Flatten the directory structure under include/config/ so CONFIG
options and filenames match
- Change the deb source package name from linux-$(KERNELRELEASE) to
linux-upstream
* tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits)
kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test
kbuild: deb-pkg: change the source package name to linux-upstream
tools: do not include scripts/Kbuild.include
kbuild: redo fake deps at include/config/*.h
kbuild: remove TMPO from try-run
MAINTAINERS: add pattern for dummy-tools
kbuild: add an elfnote for whether vmlinux is built with lto
ia64: syscalls: switch to generic syscallhdr.sh
ia64: syscalls: switch to generic syscalltbl.sh
alpha: syscalls: switch to generic syscallhdr.sh
alpha: syscalls: switch to generic syscalltbl.sh
sysctl: use min() helper for namecmp()
kbuild: add support for zstd compressed modules
kbuild: remove CONFIG_MODULE_COMPRESS
kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst
kbuild: move module strip/compression code into scripts/Makefile.modinst
kbuild: refactor scripts/Makefile.modinst
kbuild: rename extmod-prefix to extmod_prefix
kbuild: check module name conflict for external modules as well
kbuild: show the target directory for depmod log
...
For simple text replacement, it is better to use a built-in function
instead of sed if possible. You can save one process forking.
I do not mean to replace all sed invocations because GNU Make itself
does not support regular expression (unless you use guile).
I just replaced simple ones.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
dt-validate has an option to warn on any compatible strings which don't
match any schema. The option has recently been improved to fix false
positives, so let's enable the option. This is useful for tracking
compatibles which are undocumented or not yet converted to DT schema.
Previously, the only check of undocumented compatible strings has been
an imperfect checkpatch.pl check.
The option is enabled by default for 'dtbs_check'. This will add more
warnings, but some platforms are down to only a handful of these
warnings (good job!).
There's about 100 cases in the binding examples, so the option is
disabled until these are fixed. In the meantime, they can be checked
with:
make DT_CHECKER_FLAGS=-m dt_binding_check
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210311233640.1581526-2-robh@kernel.org
There's several dependencies in dtschema since v2020.8.1 we need, so
let's bump the version required to v2021.2.1. Specifically, the
graph.yaml schema and improved undocumented compatible check are needed.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210311233640.1581526-1-robh@kernel.org
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
-----BEGIN PGP SIGNATURE-----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=sLxb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
kbuild: remove deprecated 'always' and 'hostprogs-y/m'
kbuild: parse C= and M= before changing the working directory
kbuild: reuse this-makefile to define abs_srctree
kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
kconfig: omit --oldaskconfig option for 'make config'
kconfig: fix 'invalid option' for help option
kconfig: remove dead code in conf_askvalue()
kconfig: clean up nested if-conditionals in check_conf()
kconfig: Remove duplicate call to sym_get_string_value()
Makefile: Remove # characters from compiler string
Makefile: reuse CC_VERSION_TEXT
kbuild: check the minimum linker version in Kconfig
kbuild: remove ld-version macro
scripts: add generic syscallhdr.sh
scripts: add generic syscalltbl.sh
arch: syscalls: remove $(srctree)/ prefix from syscall tables
arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
gen_compile_commands: prune some directories
kbuild: simplify access to the kernel's version
...
As commit d0e628cd81 ("kbuild: doc: clarify the difference between
extra-y and always-y") explained, extra-y should be used for listing
the prerequisites of vmlinux.
These targets are not related to vmlinux. always-y is a better fix.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
sort -C is like sort -c >/dev/null but less portable. It fails on
busybox sort (i.e alpine linux).
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Fixes: ea5b8b5eb0 ("dt-bindings: Add a minimum version check for dtschema")
Link: https://lore.kernel.org/r/20210201165829.58656-1-iskren.chernev@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
If DT_SCHEMA_FILES is specified and contains more than one file paths,
'make dtbs_check' fails with the following message:
$ make dtbs_check DT_SCHEMA_FILES="path/to/schema1.yaml path/to/schema2.yaml"
SCHEMA Documentation/devicetree/bindings/processed-schema.json
Documentation/devicetree/bindings/Makefile:77: recipe for target 'Documentation/devicetree/bindings/processed-schema.json' failed
make[1]: *** [Documentation/devicetree/bindings/processed-schema.json] Error 255
make[1]: *** Deleting file 'Documentation/devicetree/bindings/processed-schema.json'
Makefile:1364: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
The error code 255 is returned by 'dt-mk-schema' when invoked as
'dt-mk-schema -j -u @<tmp-file>', where '<tmp-file>' is a temporary
file that is generated to contain a list of SPACE delimited schema
file paths, as indicated via DT_SCHEMA_FILES.
However, it seems the file format has been recently changed in
'dt-mk-schema', which now expects each schema path to be provided on
a separate line:
$ dt-mk-schema --version
2020.12.dev4+g6de1c45
Therefore, let's change '<tmp-file>' content format from
path/to/schema1.yaml path/to/schema2.yaml ... path/to/schemaN.yaml
to
path/to/schema1.yaml
path/to/schema2.yaml
...
path/to/schemaN.yaml
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/2519b8bde507ca6ccea9765ea197adaaa69a66d5.1605712328.git.cristian.ciocaltea@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
A broken schema file now causes make to exit and 'make -k' no longer works
now that dt-doc-validate is called from a single make rule.
As yamllint is optional, we shouldn't stop on yamllint errors either. Also,
it seems some old versions of yamllint don't work.
Signed-off-by: Rob Herring <robh@kernel.org>
Add a yamllint config file and support for running yamllint on DT
binding schema files. This runs on the whole tree as yamllint is Python
and suffers from Python's slow startup times.
Users can run on individual files doing:
yamllint -c Documentation/devicetree/bindings/.yamllint <binding file>
Link: https://lore.kernel.org/r/20201009170557.168785-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
As the number of binding schemas has grown, the time to run
dt_binding_check has gotten pretty slow. A large part of this is due to
the slow startup time of Python (a well documented problem). There's not
currently any benefit to running dt-doc-validate one file at a time, so
let's switch it to run a single rule. Doing this means we loose the make
parallelism, but we can use xargs instead. This speeds up the validation
time from several minutes to <10 sec.
Since the validation is a single step with no output, we move running it
as part of the processed-schema-examples.json target. We also need to
reorder the extra-y entries so the validation is run first rather than
after all the examples are extracted.
Signed-off-by: Rob Herring <robh@kernel.org>
Change the format of processed-schema* from yaml to json to speed up
validation. With json output, using xargs and appending the output won't
work since json has explicit list begin and end characters. Instead,
we pass the schema files as a list in a temp file.
The parsing time for the processed schema goes down from ~2sec to 70ms.
Also, 'make dtbs_check' becomes 33% faster.
Some error messages are affected by this change. For example, "True was
expected" becomes "... is not of type 'boolean'". The order of messages
is also changed.
Signed-off-by: Andrei Ziureaev <andrei.ziureaev@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
dtschema release 2020.8.1 gained several additions to help performance.
dt-doc-validate can now take a list of files and directories, and
dt-mk-schema can store the processed schema in JSON which is much faster
to parse than YAML. Utilizing both of these changes results in a 3-4x
speed improvement in running dt_binding_check.
There's also additional meta-schema checks which binding schemas should
be checked against.
Signed-off-by: Rob Herring <robh@kernel.org>
There are two processed schema files:
- processed-schema-examples.yaml
Used for 'make dt_binding_check'. This is always a full schema.
- processed-schema.yaml
Used for 'make dtbs_check'. This may be a full schema, or a smaller
subset if DT_SCHEMA_FILES is given by a user.
If DT_SCHEMA_FILES is not specified, they are the same. You can copy
the former to the latter instead of running dt-mk-schema twice. This
saves the cpu time a lot when you do 'make dt_binding_check dtbs_check'
because building the full schema takes a couple of seconds.
If DT_SCHEMA_FILES is specified, processed-schema.yaml is generated
based on the specified yaml files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-4-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Currently, processed-schema.yaml is always built, but it is actually
used only for 'make dtbs_check'.
'make dt_binding_check' uses processed-schema-example.yaml instead.
Build processed-schema.yaml only for 'make dtbs_check'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-3-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
We are having more and more schema files.
Commit 8b6b80218b ("dt-bindings: Fix command line length limit
calling dt-mk-schema") fixed the 'Argument list too long' error of
the schema checks, but the same error happens while cleaning too.
'make clean' after 'make dt_binding_check' fails as follows:
$ make dt_binding_check
[ snip ]
$ make clean
make[2]: execvp: /bin/sh: Argument list too long
make[2]: *** [scripts/Makefile.clean:52: __clean] Error 127
make[1]: *** [scripts/Makefile.clean:66: Documentation/devicetree/bindings] Error 2
make: *** [Makefile:1763: _clean_Documentation] Error 2
'make dt_binding_check' generates so many .example.dts, .dt.yaml files,
which are passed to the 'rm' command when you run 'make clean'.
I added a small hack to use the 'find' command to clean up most of the
build artifacts before they are processed by scripts/Makefile.clean
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-2-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Sync with upstream dtc primarily to pickup the I2C bus check fixes. The
interrupt_provider check is noisy, so turn it off for now.
This adds the following commits from upstream:
9d7888cbf19c dtc: Consider one-character strings as strings
8259d59f59de checks: Improve i2c reg property checking
fdabcf2980a4 checks: Remove warning for I2C_OWN_SLAVE_ADDRESS
2478b1652c8d libfdt: add extern "C" for C++
f68bfc2668b2 libfdt: trivial typo fix
7be250b4d059 libfdt: Correct condition for reordering blocks
81e0919a3e21 checks: Add interrupt provider test
85e5d839847a Makefile: when building libfdt only, do not add unneeded deps
b28464a550c5 Fix some potential unaligned accesses in dtc
Signed-off-by: Rob Herring <robh@kernel.org>
The dtschema package must be somewhat up to date as the tools and
meta-schema checks are still evolving. Implement a version check,
so this can be enforced. This will help ensure new schema submissions
get checked against the latest meta-schemas.
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
As the number of schemas has increased, we're starting to hit the error
"execvp: /bin/sh: Argument list too long". This is due to passing all the
schema files on the command line to dt-mk-schema. It currently is only
with out of tree builds and is intermittent depending on the file path
lengths.
Commit 2ba06cd856 ("kbuild: Always validate DT binding examples") made
hitting this proplem more likely since the example validation now always
gets the full list of schemas.
Fix this by passing the schema file list in a pipe and using xargs. We end
up doing the find twice, but the time is insignificant compared to the
dt-mk-schema time.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Since commit 93512dad33 ("dt-bindings: Improve validation build error
handling"), 'make dtbs_check' does not validate the schema fully.
If you want to check everything, you need to run two commands separately.
$ make ARCH=arm dt_binding_check
$ make ARCH=arm dtbs_check
They are exclusive each other, so you cannot do like this:
$ make ARCH=arm dt_binding_check dtbs_check
In this case, dt-doc-validate and dt-extract-example are skipped
because CHECK_DTBS is set.
Let's make it possible to run these two targets in a single command.
It will be useful for schema writers.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Now that we have a separate rule for DT binding examples, we can customize
the dtc options. Let's adjust the dtc warnings to me more strict by
default so the examples get cleaned up as they get converted to schema.
Leaving 'avoid_unnecessary_addr_size' and 'graph_child_address' warnings
disabled as examples tend to be incomplete and they generates a lot of
warnings.
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Most folks only run dt_binding_check on the single schema they care about
by setting DT_SCHEMA_FILES. That means example is only checked against
that one schema which is not always sufficient.
Let's address this by splitting processed-schema.yaml into 2 files: one
that's always all schemas for the examples and one that's just the schema
in DT_SCHEMA_FILES for dtbs.
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Schema errors can cause make to exit before useful information is
printed. This leaves developers wondering what's wrong. It can be
overcome passing '-k' to make, but that's not an obvious solution.
There's 2 scenarios where this happens.
When using DT_SCHEMA_FILES to validate with a single schema, any error
in the schema results in processed-schema.yaml being empty causing a
make error. The result is the specific errors in the schema are never
shown because processed-schema.yaml is the first target built. Simply
making processed-schema.yaml last in extra-y ensures the full schema
validation with detailed error messages happen first.
The 2nd problem is while schema errors are ignored for
processed-schema.yaml, full validation of the schema still runs in
parallel and any schema validation errors will still stop the build when
running validation of dts files. The fix is to not add the schema
examples to extra-y in this case. This means 'dtbs_check' is no longer a
superset of 'dt_binding_check'. Update the documentation to make this
clear.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 837158b847 ("dt-bindings: Check the examples against the
schemas") started generating YAML encoded DT files to validate the
examples against the schema. When running 'make dt_binding_check' in
tree after the 1st time, the generated example .dt.yaml files are
mistakenly added to the list of schema files. Exclude *.example.dt.yaml
files from the search for schema files.
Fixes: 837158b847 ("dt-bindings: Check the examples against the schemas")
Reported-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Currently, the binding examples are just built with dtc. dtc recently
gained the support necessary to output the examples in YAML format
(commit 87963ee20693 ("livetree: add missing type markers in generated
overlay properties"). Now just switch the output format and the examples
will be checked against the schema.
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
In order to have $ref's to schema files within the kernel, we need to
pass the base path of bindings to the schema validation tools.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module build
- allow to add optional flags to dpkg-buildpackage when building deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y9YG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module
build
- allow to add optional flags to dpkg-buildpackage when building
deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: remove scripts/basic/% build target
kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
kbuild: clean up scripts/gcc-version.sh
kbuild: remove cc-version macro
kbuild: update comment block of scripts/clang-version.sh
kbuild: remove commented-out INITRD_COMPRESS
kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
kbuild: move ".config not found!" message from Kconfig to Makefile
kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
kbuild: simplify single target rules
kbuild: remove empty rules for makefiles
kbuild: make -r/-R effective in top Makefile for old Make versions
kbuild: move tools_silent to a more relevant place
kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
kbuild: refactor cc-cross-prefix implementation
kbuild: hardcode genksyms path and remove GENKSYMS variable
scripts/gdb: refactor rules for symlink creation
kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
scripts/gdb: do not descend into scripts/gdb from scripts
...
In Kbuild, if_changed and friends must have FORCE as a prerequisite.
Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common
idiom to get the names of all the prerequisites except phony targets.
Add real-prereqs as a shorthand.
Note:
We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may
include auto-generated dependencies from the .*.cmd file when a single
object module is changed into a multi object module. Refer to commit
69ea912fda ("kbuild: remove unneeded link_multi_deps"). I added some
comment to avoid accidental breakage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
On in tree builds, subsequent builds will incorrectly include
the intermediate file 'processed-schema.yaml' with the input schema
files resulting in a build error. Update the find command to ignore
processed-schema.yaml.
Signed-off-by: Rob Herring <robh@kernel.org>
This adds the build infrastructure for checking DT binding schema
documents and validating dts files using the binding schema.
Check DT binding schema documents:
make dt_binding_check
Build dts files and check using DT binding schema:
make dtbs_check
Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.
Currently, the validation targets are separate from a normal build to
avoid a hard dependency on the external DT schema project and because
there are lots of warnings generated.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds