Factor out a new helper form ext4_get_dev_journal() to get external
journal bdev and check validation of this device, drop ext4_blkdev_get()
helper, and also remove duplicate check of journal feature. It makes
ext4_get_dev_journal() more clear than before.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-12-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Adjust the initialization sequence and error handle of journal_t, moving
load superblock to the begin, and classify others initialization.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-9-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If JBD2_FEATURE_INCOMPAT_FAST_COMMIT bit is set, it means the journal
have fast commit records need to recover, so the fast commit size
should not be too large, and the leftover normal journal size should
never less than JBD2_MIN_JOURNAL_BLOCKS. If it happens, the
journal->j_last is likely to be wrong and will probably lead to
incorrect journal recovery. So add a check into the
journal_check_superblock(), and drop the pointless check when
initializing the fastcommit parameters.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-8-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename load_superblock() to journal_load_superblock(), move getting and
reading superblock from journal_init_common() and
journal_get_superblock() to this function, and also rename
journal_get_superblock() to journal_check_superblock(), make it a pure
check helper to check superblock validity from disk.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2_verify_csum_type() helper check checksum type in the superblock for
v2 or v3 checksum feature, it always return true if these features are
not enabled, and it has only one user, so open code it is more clear.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
journal_get_superblock() is used to check validity of the jounal
supberblock, so move the features checks from jbd2_journal_load() to
journal_get_superblock().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since load_superblock() has been moved to journal_init_common(), the
in-memory superblock structure is initialized and contains valid data
once the file system has a journal_t object, so it's safe to access it,
let's drop the call to journal_get_superblock() from
jbd2_journal_check_used_features() and also drop the setting/clearing of
the veirfy bit of the superblock buffer.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move the call to load_superblock() from jbd2_journal_load() and
jbd2_journal_wipe() early into journal_init_common(), the journal
superblock gets read and the in-memory journal_t structure gets
initialised after calling jbd2_journal_init_{dev,inode}, it's safe to
do following initialization according to it.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move load_superblock() declaration and the functions it calls before
journal_init_common(). This is a preparation for moving a call to
load_superblock() from jbd2_journal_load() and jbd2_journal_wipe() to
journal_init_common(). No functional changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Using CR_BEST_AVAIL_LEN only make sense for regular files, as for
non-regular files we never normalize the allocation request length i.e.
goal len is same as original length (ac_g_ex.fe_len == ac_o_ex.fe_len).
Hence there is no scope of trimming the goal length to make it
satisfy original request len. Thus this patch avoids using
CR_BEST_AVAIL_LEN criteria for non-regular files request.
Cc: stable@kernel.org
Fixes: 33122aa930f1 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Tested-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/2a694c748ff8b8c4b416995a24f06f07b55047a8.1689516047.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the filename casefolding fails, we'll be leaking memory from the
fscrypt_name struct, namely from the 'crypto_buf.name' member.
Make sure we free it in the error path on both ext4_fname_setup_filename()
and ext4_fname_prepare_lookup() functions.
Cc: stable@kernel.org
Fixes: 1ae98e295f ("ext4: optimize match for casefolded encrypted dirs")
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230803091713.13239-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The code calling function '__cp_buffer_busy' has been removed, so the
function should also be removed.
silence the warning:
fs/jbd2/checkpoint.c:48:20: warning: unused function '__cp_buffer_busy'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5518
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230714025528.564988-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Following process will corrupt ext4 image:
Step 1:
jbd2_journal_commit_transaction
__jbd2_journal_insert_checkpoint(jh, commit_transaction)
// Put jh into trans1->t_checkpoint_list
journal->j_checkpoint_transactions = commit_transaction
// Put trans1 into journal->j_checkpoint_transactions
Step 2:
do_get_write_access
test_clear_buffer_dirty(bh) // clear buffer dirty，set jbd dirty
__jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2
Step 3:
drop_cache
journal_shrink_one_cp_list
jbd2_journal_try_remove_checkpoint
if (!trylock_buffer(bh)) // lock bh, true
if (buffer_dirty(bh)) // buffer is not dirty
__jbd2_journal_remove_checkpoint(jh)
// remove jh from trans1->t_checkpoint_list
Step 4:
jbd2_log_do_checkpoint
trans1 = journal->j_checkpoint_transactions
// jh is not in trans1->t_checkpoint_list
jbd2_cleanup_journal_tail(journal) // trans1 is done
Step 5: Power cut, trans2 is not committed, jh is lost in next mounting.
Fix it by checking 'jh->b_transaction' before remove it from checkpoint.
Cc: stable@kernel.org
Fixes: 46f881b5b1 ("jbd2: fix a race when checking checkpoint buffer busy")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230714025528.564988-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
journal_clean_one_cp_list() has been merged into
journal_shrink_one_cp_list(), but do chekpoint buffer cleanup from the
committing process is just a best effort, it should stop scan once it
meet a busy buffer, or else it will cause a lot of invalid buffer scan
and checks. We catch a performance regression when doing fs_mark tests
below.
Test cmd:
./fs_mark -d scratch -s 1024 -n 10000 -t 1 -D 100 -N 100
Before merging checkpoint buffer cleanup:
FSUse% Count Size Files/sec App Overhead
95 10000 1024 8304.9 49033
After merging checkpoint buffer cleanup:
FSUse% Count Size Files/sec App Overhead
95 10000 1024 7649.0 50012
FSUse% Count Size Files/sec App Overhead
95 10000 1024 2107.1 50871
After merging checkpoint buffer cleanup, the total loop count in
journal_shrink_one_cp_list() could be up to 6,261,600+ (50,000+ ~
100,000+ in general), most of them are invalid. This patch fix it
through passing 'shrink_type' into journal_shrink_one_cp_list() and add
a new 'SHRINK_BUSY_STOP' to indicate it should stop once meet a busy
buffer. After fix, the loop count descending back to 10,000+.
After this fix:
FSUse% Count Size Files/sec App Overhead
95 10000 1024 8558.4 49109
Cc: stable@kernel.org
Fixes: b98dba273a ("jbd2: remove journal_clean_one_cp_list()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230714025528.564988-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We named criteria with CR_XXX, correct stale comment to criteria with
raw number.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-11-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return good group when it's found in loop to remove futher check if good
group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-10-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return good group when it's found in loop to remove futher check if good
group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove ext4_set_bit_atomic and ext4_clear_bit_atomic which are defined but not
used.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-8-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace the traditional ternary conditional operator with with max()/min()
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The return at end of void function is unnecessary, just remove it.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return good group when it's found in loop to remove unnecessary NULL
initialization of grp and futher check if good group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ngroups is ext4_group_t (unsigned int) while next_linear_group treat it
in int. If ngroups is bigger than max number described by int, it will
be treat as a negative number. Then "return group + 1 >= ngroups ? 0 :
group + 1;" may keep returning 0.
Switch int to ext4_group_t in next_linear_group to fix the overflow.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Group corruption check will access memory of grp and will trigger kernel
crash if grp is NULL. So do NULL check before corruption check.
Fixes: 5354b2af34 ("ext4: allow ext4_get_group_info() to fail")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace CR_FAST with ext4_mb_cr_expensive() inline function for better
readability. This function returns true if the criteria is one of the
expensive/slower ones where lots of disk IO/prefetching is acceptable.
No functional changes are intended in this patch.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230630085927.140137-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The multi-mount protection kthread checks for read-only filesystem and
aborts in that case. The remount code actually handles stopping of the
kthread on remount so the only purpose of the check is in case of
emergency remount read-only. Replace the check for read-only filesystem
with a check for shutdown filesystem as running MMP on such is risky
anyway and it makes ordering of things during remount simpler.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-11-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
JBD2 code will quickly return without doing anything when there's
nothing to commit so there's no point in the read-only check in
ext4_force_commit(). Just drop it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We should not have dirty inodes on read-only filesystem. Also silently
bailing without writing anything would be a problem when we enable
quotas during remount while the filesystem is read-only. So drop the
read-only check.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We better should not be initializing inode tables on read-only
filesystem. The following transaction start will warn us and make the
function bail anyway so drop the pointless check.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that filesystem abort marks the filesystem as shutdown, we shouldn't
be ever hitting the sb_rdonly() check in ext4_journal_check_start().
Since this is a suitable place for catching all sorts of programming
errors, convert the check to WARN_ON instead of dropping it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-7-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When the filesystem gets first remounted read-only and then unmounted,
ext4_quota_off() will try to start a transaction (and fail) on read-only
filesystem to cleanup inode flags for legacy quota files. Just bail
before trying to start a transaction instead since that is going to
issue a warning.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-6-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
EXT4_MF_FS_ABORTED flag has practically the same intent as
EXT4_FLAGS_SHUTDOWN flag. The shutdown flag is checked in many more
places than the aborted flag which is mostly the historical artifact
where we were relying on SB_RDONLY checks instead of the aborted flag
checks. There are only three places - ext4_sync_file(),
__ext4_remount(), and mballoc debug code - which check aborted flag and
not shutdown flag and this is arguably a bug. Avoid these
inconsistencies by removing EXT4_MF_FS_ABORTED flag and using
EXT4_FLAGS_SHUTDOWN everywhere.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
'abort' mount option is the only mount option that has special handling
and sets a bit in sbi->s_mount_flags. There is not strong reason for
that so just simplify the code and make 'abort' set a bit in
sbi->s_mount_opt2 as any other mount option. This simplifies the code
and will allow us to drop EXT4_MF_FS_ABORTED completely in the following
patch.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4_forced_shutdown() takes struct ext4_sb_info but most
callers need to get it from struct super_block anyway. So just pass in
struct super_block to save all callers from some boilerplate code. No
functional changes.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_freeze() and ext4_unfreeze() checks for sb_rdonly(). However this
check is pointless as VFS already checks for read-only filesystem before
calling filesystem specific methods. Remove the pointless checks.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In jbd2_journal_load(), when journal_reset fails, it prints an incorrect
warn log.
Fix this by changing the goto statement to return statement.
Also, return actual error code from jbd2_journal_recover() and journal_reset().
Signed-off-by: Guoqing Cai <u202112087@hust.edu.cn>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230413095740.2222066-1-u202112087@hust.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Let's say we want to allocate 2 blocks starting from 4294966386, after
predicting the file size, start is aligned to 4294965248, len is changed
to 2048, then end = start + size = 0x100000000. Since end is of
type ext4_lblk_t, i.e. uint, end is truncated to 0.
This causes (pa->pa_lstart >= end) to always hold when checking if the
current extent to be allocated crosses already preallocated blocks, so the
resulting ac_g_ex may cross already preallocated blocks. Hence we convert
the end type to loff_t and use pa_logical_end() to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:
=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
<TASK>
ext4_mb_use_best_found+0x203/0x2f0
ext4_mb_try_best_found+0x163/0x240
ext4_mb_regular_allocator+0x158/0x1550
ext4_mb_new_blocks+0x86a/0xe10
ext4_ext_map_blocks+0xb0c/0x13a0
ext4_map_blocks+0x2cd/0x8f0
ext4_iomap_begin+0x27b/0x400
iomap_iter+0x222/0x3d0
__iomap_dio_rw+0x243/0xcb0
iomap_dio_rw+0x16/0x80
=========================================================
A simple reproducer demonstrating the problem:
mkfs.ext4 -F /dev/sda -b 4096 100M
mount /dev/sda /tmp/test
fallocate -l1M /tmp/test/tmp
fallocate -l10M /tmp/test/file
fallocate -i -o 1M -l16777203M /tmp/test/file
fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
sleep 10 && killall -9 fsstress
rm -f /tmp/test/tmp
xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"
We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code.
Cc: stable@kernel.org # 6.4
Fixes: 93cdf49f6e ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we use lstart + len to calculate the end of free extent or prealloc
space, it may exceed the maximum value of 4294967295(0xffffffff) supported
by ext4_lblk_t and cause overflow, which may lead to various problems.
Therefore, we add two helper functions, extent_logical_end() and
pa_logical_end(), to limit the type of end to loff_t, and also convert
lstart to loff_t for calculation to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- Swapping the ring buffer for snapshotting (for things like irqsoff)
can crash if the ring buffer is being resized. Disable swapping
when this happens. The missed swap will be reported to the tracer.
- Report error if the histogram fails to be created due to an error in
adding a histogram variable, in event_hist_trigger_parse().
- Remove unused declaration of tracing_map_set_field_descr().
Chen Lin (1):
ring-buffer: Do not swap cpu_buffer during resize process
Mohamed Khalfella (1):
tracing/histograms: Return an error if we fail to add histogram to hist_vars list
YueHaibing (1):
tracing: Remove unused extern declaration tracing_map_set_field_descr()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZL2IixQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsHAAQCS/VLpMOA5AS9JWvwuEnGAVymyJcGS
jmnWkuMmf5fPpQD/di/xY1clLNhz6P7PAZvR3N6qw3AsNjPW/ZapDkrRWQA=
=RoHL
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Swapping the ring buffer for snapshotting (for things like irqsoff)
can crash if the ring buffer is being resized. Disable swapping when
this happens. The missed swap will be reported to the tracer
- Report error if the histogram fails to be created due to an error in
adding a histogram variable, in event_hist_trigger_parse()
- Remove unused declaration of tracing_map_set_field_descr()
* tag 'trace-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/histograms: Return an error if we fail to add histogram to hist_vars list
ring-buffer: Do not swap cpu_buffer during resize process
tracing: Remove unused extern declaration tracing_map_set_field_descr()
- Fix stale help text in gconfig
- Support *.S files in compile_commands.json
- Flatten KBUILD_CFLAGS
- Fix external module builds with Rust so that temporary files are
created in the modules directories instead of the kernel tree
-----BEGIN PGP SIGNATURE-----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=BmWs
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix stale help text in gconfig
- Support *.S files in compile_commands.json
- Flatten KBUILD_CFLAGS
- Fix external module builds with Rust so that temporary files are
created in the modules directories instead of the kernel tree
* tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: rust: avoid creating temporary files
kbuild: flatten KBUILD_CFLAGS
gen_compile_commands: add assembly files to compilation database
kconfig: gconfig: correct program name in help text
kconfig: gconfig: drop the Show Debug Info help text
`rustc` outputs by default the temporary files (i.e. the ones saved
by `-Csave-temps`, such as `*.rcgu*` files) in the current working
directory when `-o` and `--out-dir` are not given (even if
`--emit=x=path` is given, i.e. it does not use those for temporaries).
Since out-of-tree modules are compiled from the `linux` tree,
`rustc` then tries to create them there, which may not be accessible.
Thus pass `--out-dir` explicitly, even if it is just for the temporary
files.
Similarly, do so for Rust host programs too.
Reported-by: Raphael Nestler <raphael.nestler@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1015
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs
Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs
Fixes: 295d8398c6 ("kbuild: specify output names separately for each emission type from rustc")
Cc: stable@vger.kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* Avoid pKVM finalization if KVM initialization fails
* Add missing BTI instructions in the hypervisor, fixing an early boot
failure on BTI systems
* Handle MMU notifiers correctly for non hugepage-aligned memslots
* Work around a bug in the architecture where hypervisor timer controls
have UNKNOWN behavior under nested virt.
* Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
in cpu hotplug resulting from per-CPU accessor sanity checking.
* Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
* Uphold RES0 sysreg behavior when emulating older PMU versions
* Avoid macro expansion when initializing PMU register names, ensuring
the tracepoints pretty-print the sysreg.
s390:
* Two fixes for asynchronous destroy
x86 fixes will come early next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmS9WpwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOhTAf9EsrnrDK2U0Q1wIGZCh/3d662yslF
Kh0GidZ62w4P1O4q19lFhJ5ixVdHJjGaNrYGZm77yAi0UaYzx4wvkohdaDhIdeMg
3do2uo6/iGU5m24BaVIXlSr8V6KDsMw0UvCAjxFWNvCzpR/7tpLOteXFS9rZQ+1N
jfvoVKqE6LfgJ5IZiVdhIdEOxCf/QuQD/WdZ7fib8ngkY3dETi03MkATFKchtIzx
j5aWruVHQlmb5ukZzHmmNuF7Yf6c1Bs+Rt6JFjyL+DxbtPBJmHP4TepYCDS4UqIm
kkxrsqiTde13jQN7vDWzfzdpLQPIGV9OnvGWQoR4dyKfDlqSxJJyhXPuBw==
=Mkzl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early
boot failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer
controls have UNKNOWN behavior under nested virt
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel
BUG in cpu hotplug resulting from per-CPU accessor sanity checking
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names,
ensuring the tracepoints pretty-print the sysreg
s390:
- Two fixes for asynchronous destroy
x86 fixes will come early next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: pv: fix index value of replaced ASCE
KVM: s390: pv: simplify shutdown and fix race
KVM: arm64: Fix the name of sys_reg_desc related to PMU
KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount
KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption
KVM: arm64: Add missing BTI instructions
KVM: arm64: Correctly handle page aging notifiers for unaligned memslot
KVM: arm64: Disable preemption in kvm_arch_hardware_enable()
KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm
KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits
checkpoint code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmS9HHIACgkQ8vlZVpUN
gaNg/wf8DAf9PMn2bmQ309Acs5E8Qi1bga/ofNnoBcDNC7k+iKGAGgwOnCn+ity4
32KiA5Yh7tzoYvZHUTE5k297mN+4AX4DyAREh1cVITohRxm3BpXYZzezdLSieS8b
7RAdOinaWzs0dBjwNqkKVrTL3jduD704DnefrtHFvwqzBf/QSVSaACoPACqCFyxx
TFvutv2h5ifjS7fsjKXrXjHUAYMJCYzJNOcTW1OUb8rknUhCaKyoCkFht4PawuVx
h1wTkP87RW/bTgHA7Kqrq4BY2nLg8U0B3U/4qmW7wMjUYyAPLTUXKD3Ewj7XaFMA
UYRBr7xba8GWqyOURb3TvzrwRjqTJg==
=inak
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug and regression fixes for 6.5-rc3 for ext4's mballoc and jbd2's
checkpoint code"
* tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix rbtree traversal bug in ext4_mb_use_preallocated
ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail()
ext4: correct inline offset when handling xattrs in inode body
jbd2: remove __journal_try_to_free_buffer()
jbd2: fix a race when checking checkpoint buffer busy
jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint
jbd2: remove journal_clean_one_cp_list()
jbd2: remove t_checkpoint_io_list
jbd2: recheck chechpointing non-dirty buffer
-----BEGIN PGP SIGNATURE-----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=HN3q
-----END PGP SIGNATURE-----
Merge tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French:
"Add minor debugging improvement.
The change improves ability to read a network trace to debug problems
on encrypted connections which are very common (e.g. using wireshark
or tcpdump).
That works today with tools like 'smbinfo keys /mnt/file' but requires
passing in a filename on the mount (see e.g. [1]), but it often makes
more sense to just pass in the mount point path (ie a directory not a
filename).
So this fix was needed to debug some types of problems (an obvious
example is on an encrypted connection failing operations on an empty
share or with no files in the root of the directory) - so you can
simply pass in the 'smbinfo keys <mntpoint>' and get the information
that wireshark needs"
Link: https://wiki.samba.org/index.php/Wireshark_Decryption [1]
* tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: allow dumping keys for directories too
