Add support for digital volume control. There is no dedicated register
for volume control but instead there are 4. The values of the registers
are determined with exponential floating point math.
So a table was created with register values for 2dB step increments
from -110dB to 0dB.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200221124151.8774-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This field is not used anywhere in the driver, so remove it.
Fixes: 36c684936f ("ASoC: Add sun8i digital audio codec")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200217064250.15516-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The AIU audio controller on the Meson8 and Meson8b SoC families is
compatible with the one found in the later GXBB family. Add compatible
strings for these two older SoC families so the driver can be loaded for
them.
Instead of using the I2S divider from the AIU_CLK_CTRL_MORE register we
need to use the I2S divider from the AIU_CLK_CTRL register. This older
register is less flexible because it only supports four divider settings
(1, 2, 4, 8) compared to the AIU_CLK_CTRL_MORE register (which supports
dividers in the range 0..64).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200220205711.77953-4-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a struct aiu_platform_data to make the driver aware of
platform specific information. Convert the existing check for the
internal stereo audio codec (only available on GXL) to this new struct.
Support for the 32-bit SoCs will need this as well because the
AIU_CLK_CTRL_MORE register doesn't have the I2S divider bits (and we
need to use the I2S divider from AIU_CLK_CTRL instead).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200220205711.77953-3-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AIU audio output controller on the Meson8 and Meson8b SoC families
is compatible with the one found in the GXBB family. Document the
compatible string for these two older SoCs.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200220205711.77953-2-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the tlv320adcx140 codec driver family.
The TLV320ADCx140 is a Burr-Brown™ highperformance, audio analog-to-digital
converter (ADC) that supports simultaneous sampling of up to four analog
channels or eight digital channels for the pulse density modulation (PDM)
microphone input. The device supports line and microphone inputs, and
allows for both single-ended and differential input configurations.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200220210759.31466-3-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to configure the HDA controller with an external HDA
codec even if iDisp codec in i915 is not available.
This can happen for multiple reasons:
- internal graphics is disabled on the system
- i915 driver is not enabled in kernel or it fails to init
- i915 codec reports error in HDA codec probe
- HDA codec driver probe fails
Address all these scenarios, but keep using the existing topology.
In case failures occur, HDMI PCM nodes are created, but they will
report error if application tries to use them. No ALSA mixer controls
are created. If the external HDA codec init fails as well, SOF probe
will return error as before.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206085
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1163677
BugLink: https://github.com/thesofproject/linux/issues/1658
Link: https://lore.kernel.org/r/20200220171028.22023-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently it is possible to get the following bad config:
WARNING: unmet direct dependencies detected for SND_SOC_WM5110
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && MFD_WM5110 [=n]
commit ea00d95200 ("ASoC: Use imply for SND_SOC_ALL_CODECS")
commit d8dd3f92a6 ("ASoC: Fix SND_SOC_ALL_CODECS imply misc fallout")
After these two patches the machine drivers still selects the
SND_SOC_WM5110 symbol which doesn't take account of the dependency
added on the MFD_WM5110 symbol, fix this by also adding a dependency on
MFD_WM5110 itself.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200220125654.7064-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that dpcm_get_be() is used in dpcm_end_walk_at_be(), it is not a error
if this function does not find a BE for the provided widget. Remove the
related dev_err() trace which is confusing since things might be working
as expected.
When called from dpcm_add_paths(), it is an error if dpcm_get_be() fails to
find a BE for the provided widget. The necessary error trace is already
done in this case.
Fixes: 027a483871 ("ASoC: soc-pcm: use dpcm_get_be() at dpcm_end_walk_at_be()")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200219115048.934678-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the STM32 I2S bindings to DT schema format using json-schema.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200207120345.24672-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RK3328 reference design uses an external line driver IC as a buffer
on the analog codec output, enabled by the GPIO_MUTE pin, and such a
configuration is currently assumed in the codec driver's direct poking
of GRF_SOC_CON10 to control the GPIO_MUTE output value. However, some
boards wire up analog audio yet use that pin for some other purpose, so
that assumption doesn't always hold. Update this functionality to rely
on an explicit GPIO descriptor, such that it can be managed at the
board level.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5bc383ed1832f0f5d1dcb3c97ad92fd68e5217e3.1581376744.git.robin.murphy@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing RK3328 codec drivers have overloaded the GRF phandle to assume
implicit control of the limited-function GPIO_MUTE pin, which is usually
used to enable an external audio line driver IC. Since this pin has a
proper binding of its own (see gpio/rockchip,rk3328-grf-gpio.txt), make
a GPIO explicit in the codec binding too. This will help avoid ambiguity
on boards that use that pin for some other purpose.
(and while touching the example, enforce the "don't include status" rule)
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5f7a399dea8a9dedef57f6f99f0f6ab1c1fdc56a.1581376744.git.robin.murphy@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add additional support for ISENSE and VSENSE feature for the TAS2562.
This feature monitors the output to the loud speaker attempts to
eliminate IR drop errors due to packaging.
This feature is defined in Section 8.4.5 IV Sense of the data sheet.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200219134622.22066-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit b2354e4009.
This change might have been desirable to ensure the uniqueness of
the component name. It would have helped to better support linux
devices which register multiple components, something is which more
common than initially thought.
However, some card driver are directly using dev_name() to fill the
component names of the dai_link which is a problem if want to change
the way ASoC generates the component names.
Until we figure out the appropriate way to deal with this, revert the
change and keep the names as they were. There might be a couple of warning
related to debugfs (which were already present before the change) but it
is still better than breaking working audio cards.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200219102526.692126-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA code has SNDRV_PCM_STREAM_PLAYBACK/CAPTURE everywhere.
Having for_each_xxxx macro is useful.
This patch adds for_each_pcm_streams() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/874kvpbotq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAI has playback_active and capture_active to care usage count.
OTOH, we have SNDRV_PCM_STREAM_PLAYBACK/CAPTURE.
But because of this kind of implementation mismatch,
ALSA SoC has many verbose code.
To solve this issue, this patch merge playback_active/capture_active
into stream_active[2];
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/875zg5botu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we use some kind of lock, we need to do unlock.
In that time, multi unlock/return is not good implementation.
This patch add label and use goto at dpcm_fe_dai_open()
to reduce such code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/877e0lboty.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Below functions are doing very similar things, the difference is
used state only.
snd_soc_dpcm_can_be_free_stop()
snd_soc_dpcm_can_be_params()
This patch adds common snd_soc_dpcm_check_state(), and use it from
snd_soc_dpcm_can_be_free_stop() / snd_soc_dpcm_can_be_params().
It can reduce duplicate code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/878sl1bou2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No one is using snd_soc_dpcm_be_get/set_state().
If it exists only by assumption that "it may be necessary someday",
let's remove it now. Otherwise code maintenance will be difficult.
We can revive it when we really needed it.
Let's remove it, so far.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87a75hbou7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No one is using soc_dpcm_be_digital_mute().
If it exists only by assumption that "it may be necessary someday",
let's remove it now. Otherwise code maintenance will be difficult.
We can revive it when we really needed it.
Let's remove it, so far.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87blpxbouc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_end_walk_at_be() and dpcm_get_be() are almost same code.
This patch uses dpcm_get_be() from dpcm_end_walk_at_be().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87d0adbouh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_end_walk_at_be() has very duplicate code.
dpcm_end_walk_at_be() {
...
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
(1) /* code for Playback */
} else {
(2) /* code for Capture */
}
}
The difference between Playback (1) and Capture (2) code is pointer only
(= "playback_widget" or "caputre_widget").
OTOH, now we already has dai_get_widget() for it.
This means we can merge (1) and (2).
This patch do it and remove duplicated code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87eeutboul.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_get_be() has very duplicate code.
dpcm_get_be() {
...
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
(1) /* code for Playback */
} else {
(2) /* code for Capture */
}
}
The difference between Playback (1) and Capture (2) code is pointer only
(= "playback_widget" or "caputre_widget").
OTOH, now we already has dai_get_widget() for it.
This means we can merge (1) and (2).
This patch do it and remove duplicated code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87ftf9bouq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves dai_get_widget() to top side.
This is prepare for cleanup soc-pcm.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87h7zpbouu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a need to use RT5682 as DAI clock master for other codecs
within a platform, which means that the DAI clocks are required to
remain, regardless of whether the RT5682 is actually running
playback/capture.
The RT5682 CCF basic functions are implemented almost by the existing
internal functions and asoc apis. It needs a clk provider (rt5682 mclk)
to generate the bclk and wclk outputs.
The RT5682 CCF supports and restricts as below:
1. Fmt of DAI-AIF1 must be configured to master before using CCF.
2. Only accept a 48MHz clk as the clk provider.
3. Only provide a 48kHz wclk and a set of multiples of wclk as bclk.
There are some temporary limitations in this patch until a better
implementation.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1582033912-6841-1-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare extraction CPU DAI as well as sof_probe_compr_ops. FE DAIs can
link against these new CPU DAI to create new compress devices.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200218143924.10565-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define debugfs subdirectory delegated for IPC communication with DSP.
Input format: uint,uint,(...) which are later translated into DWORDS
sequence and further into instances of struct of interest given the IPC
type.
For Extractor probes, following have been enabled:
- PROBE_POINT_ADD (echo <..> probe_points)
- PROBE_POINT_REMOVE (echo <..> probe_points_remove)
- PROBE_POINT_INFO (cat probe_points)
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200218143924.10565-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add HDA handlers for soc_compr_ops and snd_compr_ops which cover probe
related operations. Implementation supports both connection purposes.
These merely define stream setups as core flow is covered by SOF
compress core.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200218143924.10565-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
