Currently we have a different COW logic when:
* triggering a read-fault to swapin first and then trigger a write-fault
-> do_swap_page() + do_wp_page()
* triggering a write-fault to swapin
-> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page()
The COW logic in do_swap_page() is different than our reuse logic in
do_wp_page(). The COW logic in do_wp_page() -- page_count() == 1 -- makes
currently sure that we certainly don't have a remaining reference, e.g.,
via GUP, on the target page we want to reuse: if there is any unexpected
reference, we have to copy to avoid information leaks.
As do_swap_page() behaves differently, in environments with swap enabled
we can currently have an unintended information leak from the parent to
the child, similar as known from CVE-2020-29374:
1. Parent writes to anonymous page
-> Page is mapped writable and modified
2. Page is swapped out
-> Page is unmapped and replaced by swap entry
3. fork()
-> Swap entries are copied to child
4. Child pins page R/O
-> Page is mapped R/O into child
5. Child unmaps page
-> Child still holds GUP reference
6. Parent writes to page
-> Page is reused in do_swap_page()
-> Child can observe changes
Exchanging 2. and 3. should have the same effect.
Let's apply the same COW logic as in do_wp_page(), conditionally trying to
remove the page from the swapcache after freeing the swap entry, however,
before actually mapping our page. We can change the order now that we use
try_to_free_swap(), which doesn't care about the mapcount, instead of
reuse_swap_page().
To handle references from the LRU pagevecs, conditionally drain the local
LRU pagevecs when required, however, don't consider the page_count() when
deciding whether to drain to keep it simple for now.
Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's make it clearer that KSM might only have to copy a page in case we
have a page in the swapcache, not if we allocated a fresh page and
bypassed the swapcache. While at it, add a comment why this is usually
necessary and merge the two swapcache conditions.
[akpm@linux-foundation.org: fix comment, per David]
Link: https://lkml.kernel.org/r/20220131162940.210846-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For example, if a page just got swapped in via a read fault, the LRU
pagevecs might still hold a reference to the page. If we trigger a write
fault on such a page, the additional reference from the LRU pagevecs will
prohibit reusing the page.
Let's conditionally drain the local LRU pagevecs when we stumble over a
!PageLRU() page. We cannot easily drain remote LRU pagevecs and it might
not be desirable performance-wise. Consequently, this will only avoid
copying in some cases.
Add a simple "page_count(page) > 3" check first but keep the
"page_count(page) > 1 + PageSwapCache(page)" check in place, as we want to
minimize cases where we remove a page from the swapcache but won't be able
to reuse it, for example, because another process has it mapped R/O, to
not affect reclaim.
We cannot easily handle the following cases and we will always have to
copy:
(1) The page is referenced in the LRU pagevecs of other CPUs. We really
would have to drain the LRU pagevecs of all CPUs -- most probably
copying is much cheaper.
(2) The page is already PageLRU() but is getting moved between LRU
lists, for example, for activation (e.g., mark_page_accessed()),
deactivation (MADV_COLD), or lazyfree (MADV_FREE). We'd have to
drain mostly unconditionally, which might be bad performance-wise.
Most probably this won't happen too often in practice.
Note that there are other reasons why an anon page might temporarily not
be PageLRU(): for example, compaction and migration have to isolate LRU
pages from the LRU lists first (isolate_lru_page()), moving them to
temporary local lists and clearing PageLRU() and holding an additional
reference on the page. In that case, we'll always copy.
This change seems to be fairly effective with the reproducer [1] shared by
Nadav, as long as writeback is done synchronously, for example, using
zram. However, with asynchronous writeback, we'll usually fail to free
the swapcache because the page is still under writeback: something we
cannot easily optimize for, and maybe it's not really relevant in
practice.
[1] https://lkml.kernel.org/r/0480D692-D9B2-429A-9A88-9BBA1331AC3A@gmail.com
Link: https://lkml.kernel.org/r/20220131162940.210846-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: COW fixes part 1: fix the COW security issue for THP and swap", v3.
This series attempts to optimize and streamline the COW logic for ordinary
anon pages and THP anon pages, fixing two remaining instances of
CVE-2020-29374 in do_swap_page() and do_huge_pmd_wp_page(): information
can leak from a parent process to a child process via anonymous pages
shared during fork().
This issue, including other related COW issues, has been summarized in [2]:
"1. Observing Memory Modifications of Private Pages From A Child Process
Long story short: process-private memory might not be as private as you
think once you fork(): successive modifications of private memory
regions in the parent process can still be observed by the child
process, for example, by smart use of vmsplice()+munmap().
The core problem is that pinning pages readable in a child process, such
as done via the vmsplice system call, can result in a child process
observing memory modifications done in the parent process the child is
not supposed to observe. [1] contains an excellent summary and [2]
contains further details. This issue was assigned CVE-2020-29374 [9].
For this to trigger, it's required to use a fork() without subsequent
exec(), for example, as used under Android zygote. Without further
details about an application that forks less-privileged child processes,
one cannot really say what's actually affected and what's not -- see the
details section the end of this mail for a short sshd/openssh analysis.
While commit 17839856fd ("gup: document and work around "COW can break
either way" issue") fixed this issue and resulted in other problems
(e.g., ptrace on pmem), commit 09854ba94c ("mm: do_wp_page()
simplification") re-introduced part of the problem unfortunately.
The original reproducer can be modified quite easily to use THP [3] and
make the issue appear again on upstream kernels. I modified it to use
hugetlb [4] and it triggers as well. The problem is certainly less
severe with hugetlb than with THP; it merely highlights that we still
have plenty of open holes we should be closing/fixing.
Regarding vmsplice(), the only known workaround is to disallow the
vmsplice() system call ... or disable THP and hugetlb. But who knows
what else is affected (RDMA? O_DIRECT?) to achieve the same goal -- in
the end, it's a more generic issue"
This security issue was first reported by Jann Horn on 27 May 2020 and it
currently affects anonymous pages during swapin, anonymous THP and hugetlb.
This series tackles anonymous pages during swapin and anonymous THP:
- do_swap_page() for handling COW on PTEs during swapin directly
- do_huge_pmd_wp_page() for handling COW on PMD-mapped THP during write
faults
With this series, we'll apply the same COW logic we have in do_wp_page()
to all swappable anon pages: don't reuse (map writable) the page in
case there are additional references (page_count() != 1). All users of
reuse_swap_page() are remove, and consequently reuse_swap_page() is
removed.
In general, we're struggling with the following COW-related issues:
(1) "missed COW": we miss to copy on write and reuse the page (map it
writable) although we must copy because there are pending references
from another process to this page. The result is a security issue.
(2) "wrong COW": we copy on write although we wouldn't have to and
shouldn't: if there are valid GUP references, they will become out
of sync with the pages mapped into the page table. We fail to detect
that such a page can be reused safely, especially if never more than
a single process mapped the page. The result is an intra process
memory corruption.
(3) "unnecessary COW": we copy on write although we wouldn't have to:
performance degradation and temporary increases swap+memory
consumption can be the result.
While this series fixes (1) for swappable anon pages, it tries to reduce
reported cases of (3) first as good and easy as possible to limit the
impact when streamlining. The individual patches try to describe in
which cases we will run into (3).
This series certainly makes (2) worse for THP, because a THP will now
get PTE-mapped on write faults if there are additional references, even
if there was only ever a single process involved: once PTE-mapped, we'll
copy each and every subpage and won't reuse any subpage as long as the
underlying compound page wasn't split.
I'm working on an approach to fix (2) and improve (3): PageAnonExclusive
to mark anon pages that are exclusive to a single process, allow GUP
pins only on such exclusive pages, and allow turning exclusive pages
shared (clearing PageAnonExclusive) only if there are no GUP pins. Anon
pages with PageAnonExclusive set never have to be copied during write
faults, but eventually during fork() if they cannot be turned shared.
The improved reuse logic in this series will essentially also be the
logic to reset PageAnonExclusive. This work will certainly take a
while, but I'm planning on sharing details before having code fully
ready.
#1-#5 can be applied independently of the rest. #6-#9 are mostly only
cleanups related to reuse_swap_page().
Notes:
* For now, I'll leave hugetlb code untouched: "unnecessary COW" might
easily break existing setups because hugetlb pages are a scarce resource
and we could just end up having to crash the application when we run out
of hugetlb pages. We have to be very careful and the security aspect with
hugetlb is most certainly less relevant than for unprivileged anon pages.
* Instead of lru_add_drain() we might actually just drain the lru_add list
or even just remove the single page of interest from the lru_add list.
This would require a new helper function, and could be added if the
conditional lru_add_drain() turn out to be a problem.
* I extended the test case already included in [1] to also test for the
newly found do_swap_page() case. I'll send that out separately once/if
this part was merged.
[1] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com
[2] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com
This patch (of 9):
Liang Zhang reported [1] that the current COW logic in do_wp_page() is
sub-optimal when it comes to swap+read fault+write fault of anonymous
pages that have a single user, visible via a performance degradation in
the redis benchmark. Something similar was previously reported [2] by
Nadav with a simple reproducer.
After we put an anon page into the swapcache and unmapped it from a single
process, that process might read that page again and refault it read-only.
If that process then writes to that page, the process is actually the
exclusive user of the page, however, the COW logic in do_co_page() won't
be able to reuse it due to the additional reference from the swapcache.
Let's optimize for pages that have been added to the swapcache but only
have an exclusive user. Try removing the swapcache reference if there is
hope that we're the exclusive user.
We will fail removing the swapcache reference in two scenarios:
(1) There are additional swap entries referencing the page: copying
instead of reusing is the right thing to do.
(2) The page is under writeback: theoretically we might be able to reuse
in some cases, however, we cannot remove the additional reference
and will have to copy.
Note that we'll only try removing the page from the swapcache when it's
highly likely that we'll be the exclusive owner after removing the page
from the swapache. As we're about to map that page writable and redirty
it, that should not affect reclaim but is rather the right thing to do.
Further, we might have additional references from the LRU pagevecs, which
will force us to copy instead of being able to reuse. We'll try handling
such references for some scenarios next. Concurrent writeback cannot be
handled easily and we'll always have to copy.
While at it, remove the superfluous page_mapcount() check: it's
implicitly covered by the page_count() for ordinary anon pages.
[1] https://lkml.kernel.org/r/20220113140318.11117-1-zhangliang5@huawei.com
[2] https://lkml.kernel.org/r/0480D692-D9B2-429A-9A88-9BBA1331AC3A@gmail.com
Link: https://lkml.kernel.org/r/20220131162940.210846-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Liang Zhang <zhangliang5@huawei.com>
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's only used inside the huge_memory.c now. Don't export it and make
it static. We can thus reduce the size of huge_memory.o a bit.
Without this patch:
text data bss dec hex filename
32319 2965 4 35288 89d8 mm/huge_memory.o
With this patch:
text data bss dec hex filename
32042 2957 4 35003 88bb mm/huge_memory.o
Link: https://lkml.kernel.org/r/20220302082145.12028-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With MADV_DONTNEED support added to hugetlb mappings, mremap testing can
also be enabled for hugetlb.
Modify the tests to use madvise MADV_DONTNEED and MADV_REMOVE instead of
fallocate hole puch for releasing hugetlb pages.
Link: https://lkml.kernel.org/r/20220215002348.128823-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that MADV_DONTNEED support for hugetlb is enabled, add corresponding
tests. MADV_REMOVE has been enabled for some time, but no tests exist so
add them as well.
Link: https://lkml.kernel.org/r/20220215002348.128823-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Add hugetlb MADV_DONTNEED support", v3.
Userfaultfd selftests for hugetlb does not perform UFFD_EVENT_REMAP
testing. However, mremap support was recently added in commit
550a7d60bd ("mm, hugepages: add mremap() support for hugepage backed
vma"). While attempting to enable mremap support in the test, it was
discovered that the mremap test indirectly depends on MADV_DONTNEED.
madvise does not allow MADV_DONTNEED for hugetlb mappings. However, that
is primarily due to the check in can_madv_lru_vma(). By simply removing
the check and adding huge page alignment, MADV_DONTNEED can be made to
work for hugetlb mappings.
Do note that there is no compelling use case for adding this support.
This was discussed in the RFC [1]. However, adding support makes sense as
it is fairly trivial and brings hugetlb functionality more in line with
'normal' memory.
After enabling support, add selftest for MADV_DONTNEED as well as
MADV_REMOVE. Then update userfaultfd selftest.
If new functionality is accepted, then madvise man page will be updated to
indicate hugetlb is supported. It will also be updated to clarify what
happens to the passed length argument.
This patch (of 3):
MADV_DONTNEED is currently disabled for hugetlb mappings. This certainly
makes sense in shared file mappings as the pagecache maintains a reference
to the page and it will never be freed. However, it could be useful to
unmap and free pages in private mappings. In addition, userfaultfd minor
fault users may be able to simplify code by using MADV_DONTNEED.
The primary thing preventing MADV_DONTNEED from working on hugetlb
mappings is a check in can_madv_lru_vma(). To allow support for hugetlb
mappings create and use a new routine madvise_dontneed_free_valid_vma()
that allows hugetlb mappings in this specific case.
For normal mappings, madvise requires the start address be PAGE aligned
and rounds up length to the next multiple of PAGE_SIZE. Do similarly for
hugetlb mappings: require start address be huge page size aligned and
round up length to the next multiple of huge page size. Use the new
madvise_dontneed_free_valid_vma routine to check alignment and round up
length/end. zap_page_range requires this alignment for hugetlb vmas
otherwise we will hit BUGs.
Link: https://lkml.kernel.org/r/20220215002348.128823-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220215002348.128823-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If LOCKDEP detects a bug while KASAN is printing a report and if
panic_on_warn is set, KASAN will not be able to finish. Disable LOCKDEP
while KASAN is printing a report.
See https://bugzilla.kernel.org/show_bug.cgi?id=202115 for an example
of the issue.
Link: https://lkml.kernel.org/r/c48a2a3288200b07e1788b77365c2f02784cfeb4.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Move kasan_save_enable/restore_multi_shot() declarations to
mm/kasan/kasan.h, as there is no need for them to be visible outside
of KASAN implementation.
- Only define and export these functions when KASAN tests are enabled.
- Move their definitions closer to other test-related code in report.c.
Link: https://lkml.kernel.org/r/6ba637333b78447f027d775f2d55ab1a40f63c99.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move print_error_description()'s, report_suppressed()'s, and
report_enabled()'s definitions to improve the logical order of function
definitions in report.c.
No functional changes.
Link: https://lkml.kernel.org/r/82aa926c411e00e76e97e645a551ede9ed0c5e79.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, only kasan_report() checks the KASAN_BIT_REPORTED and
KASAN_BIT_MULTI_SHOT flags.
Make other reporting routines check these flags as well.
Also add explanatory comments.
Note that the current->kasan_depth check is split out into
report_suppressed() and only called for kasan_report().
Link: https://lkml.kernel.org/r/715e346b10b398e29ba1b425299dcd79e29d58ce.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a comment explaining why kasan_report() is the only reporting function
that uses user_access_save/restore().
Link: https://lkml.kernel.org/r/1201ca3c2be42c7bd077c53d2e46f4a51dd1476a.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Place kasan_report_async() next to the other main reporting routines.
Also simplify printed information.
Link: https://lkml.kernel.org/r/52d942ef3ffd29bdfa225bbe8e327bc5bda7ab09.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Call print_report() in kasan_report_invalid_free() instead of calling
printing functions directly. Compared to the existing implementation of
kasan_report_invalid_free(), print_report() makes sure that the buggy
address has metadata before printing it.
The change requires adding a report type field into kasan_access_info and
using it accordingly.
kasan_report_async() is left as is, as using print_report() will only
complicate the code.
Link: https://lkml.kernel.org/r/9ea6f0604c5d2e1fb28d93dc6c44232c1f8017fe.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge __kasan_report() into kasan_report(). The code is simple enough to
be readable without the __kasan_report() helper.
Link: https://lkml.kernel.org/r/c8a125497ef82f7042b3795918dffb81a85a878e.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Split out the part of __kasan_report() that prints things into
print_report(). One of the subsequent patches makes another error handler
use print_report() as well.
Includes lower-level changes:
- Allow addr_has_metadata() accepting a tagged address.
- Drop the const qualifier from the fields of kasan_access_info to
avoid excessive type casts.
- Change the type of the address argument of __kasan_report() and
end_report() to void * to reduce the number of type casts.
Link: https://lkml.kernel.org/r/9be3ed99dd24b9c4e1c4a848b69a0c6ecefd845e.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the disable_trace_on_warning() call, which enables the
/proc/sys/kernel/traceoff_on_warning interface for KASAN bugs, to
start_report(), so that it functions for all types of KASAN reports.
Link: https://lkml.kernel.org/r/7c066c5de26234ad2cebdd931adfe437f8a95d58.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of duplicating calls to update_kunit_status() in every error
report routine, call it once in start_report(). Pass the sync flag as an
additional argument to start_report().
Link: https://lkml.kernel.org/r/cae5c845a0b6f3c867014e53737cdac56b11edc7.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Check the more specific CONFIG_KASAN_KUNIT_TEST config option when
defining things related to KUnit-compatible KASAN tests instead of
CONFIG_KUNIT.
Also put the kunit_kasan_status definition next to the definitons of other
KASAN-related structs.
Link: https://lkml.kernel.org/r/223592d38d2a601a160a3b2b3d5a9f9090350e62.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Rename kasan_update_kunit_status() to update_kunit_status() (the
function is static).
- Move the IS_ENABLED(CONFIG_KUNIT) to the function's definition
instead of duplicating it at call sites.
- Obtain and check current->kunit_test within the function.
Link: https://lkml.kernel.org/r/dac26d811ae31856c3d7666de0b108a3735d962d.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, end_report() does not call trace_error_report_end() for bugs
detected in either async or asymm mode (when kasan_async_fault_possible()
returns true), as the address of the bad access might be unknown.
However, for asymm mode, the address is known for faults triggered by read
operations.
Instead of using kasan_async_fault_possible(), simply check that the addr
is not NULL when calling trace_error_report_end().
Link: https://lkml.kernel.org/r/1c8ce43f97300300e62c941181afa2eb738965c5.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Print at least task name and id for reports affecting allocas
(get_address_stack_frame_info() does not support them).
- Capitalize first letter of each sentence.
Link: https://lkml.kernel.org/r/aa613f097c12f7b75efb17f2618ae00480fb4bc3.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Move printing stack frame info before printing page info.
- Add object_is_on_stack() check to print_address_description() and add
a corresponding WARNING to kasan_print_address_stack_frame(). This
looks more in line with the rest of the checks in this function and
also allows to avoid complicating code logic wrt line breaks.
- Clean up comments related to get_address_stack_frame_info().
Link: https://lkml.kernel.org/r/1ee113a4c111df97d168c820b527cda77a3cac40.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a line break after each part that describes the buggy address.
Improves readability of reports.
Link: https://lkml.kernel.org/r/8682c4558e533cd0f99bdb964ce2fe741f2a9212.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kasan: report clean-ups and improvements".
A number of clean-up patches for KASAN reporting code. Most are
non-functional and only improve readability.
This patch (of 22):
describe_object_addr() used to be called with NULL addr in the early days
of KASAN. This no longer happens, so drop the check.
Link: https://lkml.kernel.org/r/cover.1646237226.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/761f8e5a6ee040d665934d916a90afe9f322f745.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Print virtual mapping range and its creator in reports affecting virtual
mappings.
Also get physical page pointer for such mappings, so page information gets
printed as well.
Link: https://lkml.kernel.org/r/6ebb11210ae21253198e264d4bb0752c1fad67d7.1645548178.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function kasan_global_oob was renamed to kasan_global_oob_right, but
the comments referring to it were not updated. Do so.
Link: https://linux-review.googlesource.com/id/I20faa90126937bbee77d9d44709556c3dd4b40be
Link: https://lkml.kernel.org/r/20220219012433.890941-1-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In mm/Makefile has:
obj-$(CONFIG_KASAN) += kasan/
So that we don't need 'obj-$(CONFIG_KASAN) :=' in mm/kasan/Makefile,
delete it from mm/kasan/Makefile.
Link: https://lkml.kernel.org/r/20220221065421.20689-1-tangmeng@uniontech.com
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Async mode support has already been implemented in commit e80a76aa1a
("kasan, arm64: tests supports for HW_TAGS async mode") but then got
accidentally broken in commit 99734b535d ("kasan: detect false-positives
in tests").
Restore the changes removed by the latter patch and adapt them for asymm
mode: add a sync_fault flag to kunit_kasan_expectation that only get set
if the MTE fault was synchronous, and reenable MTE on such faults in
tests.
Also rename kunit_kasan_expectation to kunit_kasan_status and move its
definition to mm/kasan/kasan.h from include/linux/kasan.h, as this
structure is only internally used by KASAN. Also put the structure
definition under IS_ENABLED(CONFIG_KUNIT).
Link: https://lkml.kernel.org/r/133970562ccacc93ba19d754012c562351d4a8c8.1645033139.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the existing vmalloc_oob() test to account for the specifics of the
tag-based modes. Also add a few new checks and comments.
Add new vmalloc-related tests:
- vmalloc_helpers_tags() to check that exported vmalloc helpers can
handle tagged pointers.
- vmap_tags() to check that SW_TAGS mode properly tags vmap() mappings.
- vm_map_ram_tags() to check that SW_TAGS mode properly tags
vm_map_ram() mappings.
- vmalloc_percpu() to check that SW_TAGS mode tags regions allocated
for __alloc_percpu(). The tagging of per-cpu mappings is best-effort;
proper tagging is tracked in [1].
[1] https://bugzilla.kernel.org/show_bug.cgi?id=215019
[sfr@canb.auug.org.au: similar to "kasan: test: fix compatibility with FORTIFY_SOURCE"]
Link: https://lkml.kernel.org/r/20220128144801.73f5ced0@canb.auug.org.au
Link: https://lkml.kernel.org/r/865c91ba49b90623ab50c7526b79ccb955f544f0.1644950160.git.andreyknvl@google.com
[andreyknvl@google.com: set_memory_rw/ro() are not exported to modules]
Link: https://lkml.kernel.org/r/019ac41602e0c4a7dfe96dc8158a95097c2b2ebd.1645554036.git.andreyknvl@google.com
[akpm@linux-foundation.org: fix build]
Cc: Andrey Konovalov <andreyknvl@gmail.com>
[andreyknvl@google.com: vmap_tags() and vm_map_ram_tags() pass invalid page array size]
Link: https://lkml.kernel.org/r/bbdc1c0501c5275e7f26fdb8e2a7b14a40a9f36b.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update KASAN documentation:
- Bump Clang version requirement for HW_TAGS as ARM64_MTE depends on
AS_HAS_LSE_ATOMICS as of commit 2decad92f4 ("arm64: mte: Ensure
TIF_MTE_ASYNC_FAULT is set atomically"), which requires Clang 12.
- Add description of the new kasan.vmalloc command line flag.
- Mention that SW_TAGS and HW_TAGS modes now support vmalloc tagging.
- Explicitly say that the "Shadow memory" section is only applicable to
software KASAN modes.
- Mention that shadow-based KASAN_VMALLOC is supported on arm64.
Link: https://lkml.kernel.org/r/a61189128fa3f9fbcfd9884ff653d401864b8e74.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Generic KASAN already selects KASAN_VMALLOC to allow VMAP_STACK to be
selected unconditionally, see commit acc3042d62 ("arm64: Kconfig:
select KASAN_VMALLOC if KANSAN_GENERIC is enabled").
The same change is needed for SW_TAGS KASAN.
HW_TAGS KASAN does not require enabling KASAN_VMALLOC for VMAP_STACK, they
already work together as is. Still, selecting KASAN_VMALLOC still makes
sense to make vmalloc() always protected. In case any bugs in KASAN's
vmalloc() support are discovered, the command line kasan.vmalloc flag can
be used to disable vmalloc() checking.
Select KASAN_VMALLOC for all KASAN modes for arm64.
Link: https://lkml.kernel.org/r/99d6b3ebf57fc1930ff71f9a4a71eea19881b270.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow enabling CONFIG_KASAN_VMALLOC with SW_TAGS and HW_TAGS KASAN modes.
Also adjust CONFIG_KASAN_VMALLOC description:
- Mention HW_TAGS support.
- Remove unneeded internal details: they have no place in Kconfig
description and are already explained in the documentation.
Link: https://lkml.kernel.org/r/bfa0fdedfe25f65e5caa4e410f074ddbac7a0b59.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow disabling vmalloc() tagging for HW_TAGS KASAN via a kasan.vmalloc
command line switch.
This is a fail-safe switch intended for production systems that enable
HW_TAGS KASAN. In case vmalloc() tagging ends up having an issue not
detected during testing but that manifests in production, kasan.vmalloc
allows to turn vmalloc() tagging off while leaving page_alloc/slab
tagging on.
Link: https://lkml.kernel.org/r/904f6d4dfa94870cc5fc2660809e093fd0d27c3b.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As kasan_arg_stacktrace is only used in __init functions, mark it as
__initdata instead of __ro_after_init to allow it be freed after boot.
The other enums for KASAN args are used in kasan_init_hw_tags_cpu(), which
is not marked as __init as a CPU can be hot-plugged after boot. Clarify
this in a comment.
Link: https://lkml.kernel.org/r/7fa090865614f8e0c6c1265508efb1d429afaa50.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Besides asking vmalloc memory to be executable via the prot argument of
__vmalloc_node_range() (see the previous patch), the kernel can skip that
bit and instead mark memory as executable via set_memory_x().
Once tag-based KASAN modes start tagging vmalloc allocations, executing
code from such allocations will lead to the PC register getting a tag,
which is not tolerated by the kernel.
Generic kernel code typically allocates memory via module_alloc() if it
intends to mark memory as executable. (On arm64 module_alloc() uses
__vmalloc_node_range() without setting the executable bit).
Thus, reset pointer tags of pointers returned from module_alloc().
However, on arm64 there's an exception: the eBPF subsystem. Instead of
using module_alloc(), it uses vmalloc() (via bpf_jit_alloc_exec()) to
allocate its JIT region.
Thus, reset pointer tags of pointers returned from bpf_jit_alloc_exec().
Resetting tags for these pointers results in untagged pointers being
passed to set_memory_x(). This causes conflicts in arithmetic checks in
change_memory_common(), as vm_struct->addr pointer returned by
find_vm_area() is tagged.
Reset pointer tag of find_vm_area(addr)->addr in change_memory_common().
Link: https://lkml.kernel.org/r/b7b2595423340cd7d76b770e5d519acf3b72f0ab.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel can use to allocate executable memory. The only supported
way to do that is via __vmalloc_node_range() with the executable bit set
in the prot argument. (vmap() resets the bit via pgprot_nx()).
Once tag-based KASAN modes start tagging vmalloc allocations, executing
code from such allocations will lead to the PC register getting a tag,
which is not tolerated by the kernel.
Only tag the allocations for normal kernel pages.
[andreyknvl@google.com: pass KASAN_VMALLOC_PROT_NORMAL to kasan_unpoison_vmalloc()]
Link: https://lkml.kernel.org/r/9230ca3d3e40ffca041c133a524191fd71969a8d.1646233925.git.andreyknvl@google.com
[andreyknvl@google.com: support tagged vmalloc mappings]
Link: https://lkml.kernel.org/r/2f6605e3a358cf64d73a05710cb3da356886ad29.1646233925.git.andreyknvl@google.com
[andreyknvl@google.com: don't unintentionally disabled poisoning]
Link: https://lkml.kernel.org/r/de4587d6a719232e83c760113e46ed2d4d8da61e.1646757322.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/fbfd9939a4dc375923c9a5c6b9e7ab05c26b8c6b.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add vmalloc tagging support to HW_TAGS KASAN.
The key difference between HW_TAGS and the other two KASAN modes when it
comes to vmalloc: HW_TAGS KASAN can only assign tags to physical memory.
The other two modes have shadow memory covering every mapped virtual
memory region.
Make __kasan_unpoison_vmalloc() for HW_TAGS KASAN:
- Skip non-VM_ALLOC mappings as HW_TAGS KASAN can only tag a single
mapping of normal physical memory; see the comment in the function.
- Generate a random tag, tag the returned pointer and the allocation,
and initialize the allocation at the same time.
- Propagate the tag into the page stucts to allow accesses through
page_address(vmalloc_to_page()).
The rest of vmalloc-related KASAN hooks are not needed:
- The shadow-related ones are fully skipped.
- __kasan_poison_vmalloc() is kept as a no-op with a comment.
Poisoning and zeroing of physical pages that are backing vmalloc()
allocations are skipped via __GFP_SKIP_KASAN_UNPOISON and
__GFP_SKIP_ZERO: __kasan_unpoison_vmalloc() does that instead.
Enabling CONFIG_KASAN_VMALLOC with HW_TAGS is not yet allowed.
Link: https://lkml.kernel.org/r/d19b2e9e59a9abc59d05b72dea8429dcaea739c6.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a new GFP flag __GFP_SKIP_ZERO that allows to skip memory
initialization. The flag is only effective with HW_TAGS KASAN.
This flag will be used by vmalloc code for page_alloc allocations backing
vmalloc() mappings in a following patch. The reason to skip memory
initialization for these pages in page_alloc is because vmalloc code will
be initializing them instead.
With the current implementation, when __GFP_SKIP_ZERO is provided,
__GFP_ZEROTAGS is ignored. This doesn't matter, as these two flags are
never provided at the same time. However, if this is changed in the
future, this particular implementation detail can be changed as well.
Link: https://lkml.kernel.org/r/0d53efeff345de7d708e0baa0d8829167772521e.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a new GFP flag __GFP_SKIP_KASAN_UNPOISON that allows skipping KASAN
poisoning for page_alloc allocations. The flag is only effective with
HW_TAGS KASAN.
This flag will be used by vmalloc code for page_alloc allocations backing
vmalloc() mappings in a following patch. The reason to skip KASAN
poisoning for these pages in page_alloc is because vmalloc code will be
poisoning them instead.
Also reword the comment for __GFP_SKIP_KASAN_POISON.
Link: https://lkml.kernel.org/r/35c97d77a704f6ff971dd3bfe4be95855744108e.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only define the ___GFP_SKIP_KASAN_POISON flag when CONFIG_KASAN_HW_TAGS is
enabled.
This patch it not useful by itself, but it prepares the code for additions
of new KASAN-specific GFP patches.
Link: https://lkml.kernel.org/r/44e5738a584c11801b2b8f1231898918efc8634a.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make KASAN unpoison vmalloc mappings after they have been mapped in when
it's possible: for vmalloc() (indentified via VM_ALLOC) and vm_map_ram().
The reasons for this are:
- For vmalloc() and vm_map_ram(): pages don't get unpoisoned in case
mapping them fails.
- For vmalloc(): HW_TAGS KASAN needs pages to be mapped to set tags via
kasan_unpoison_vmalloc().
As a part of these changes, the return value of __vmalloc_node_range() is
changed to area->addr. This is a non-functional change, as
__vmalloc_area_node() returns area->addr anyway.
Link: https://lkml.kernel.org/r/fcb98980e6fcd3c4be6acdcb5d6110898ef28548.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HW_TAGS KASAN relies on ARM Memory Tagging Extension (MTE). With MTE, a
memory region must be mapped as MT_NORMAL_TAGGED to allow setting memory
tags via MTE-specific instructions.
Add proper protection bits to vmalloc() allocations. These allocations
are always backed by page_alloc pages, so the tags will actually be
getting set on the corresponding physical memory.
Link: https://lkml.kernel.org/r/983fc33542db2f6b1e77b34ca23448d4640bbb9e.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add vmalloc tagging support to SW_TAGS KASAN.
- __kasan_unpoison_vmalloc() now assigns a random pointer tag, poisons
the virtual mapping accordingly, and embeds the tag into the returned
pointer.
- __get_vm_area_node() (used by vmalloc() and vmap()) and
pcpu_get_vm_areas() save the tagged pointer into vm_struct->addr
(note: not into vmap_area->addr).
This requires putting kasan_unpoison_vmalloc() after
setup_vmalloc_vm[_locked](); otherwise the latter will overwrite the
tagged pointer. The tagged pointer then is naturally propagateed to
vmalloc() and vmap().
- vm_map_ram() returns the tagged pointer directly.
As a result of this change, vm_struct->addr is now tagged.
Enabling KASAN_VMALLOC with SW_TAGS is not yet allowed.
Link: https://lkml.kernel.org/r/4a78f3c064ce905e9070c29733aca1dd254a74f1.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
