- Drop the use of BLK_BOUNCE_HIGH
- Fix partition switch for GP3
- Remove usage of the deprecated ida_simple API
MMC host:
- cqhci: Update bouncing email-addresses in MAINTAINERS
- davinci_mmc: Use sg_miter for PIO
- dw_mmc-hi3798cv200: Convert the DT bindings to YAML
- dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant
- fsl-imx-esdhc: A couple of corrections/updates to the DT bindings
- meson-mx-sdhc: Drop use of the ->card_hw_reset() callback
- moxart-mmc: Use sg_miter for PIO
- moxart-mmc: Fix accounting for DMA transfers
- mvsdio: Use sg_miter for PIO
- mxcmmc: Use sg_miter for PIO
- omap: Use sg_miter for PIO
- renesas,sdhi: Add support for R-Car V4M variant
- sdhci-esdhc-mcf: Use sg_miter for swapping
- sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants
- sh_mmcif: Use sg_miter for PIO
- tmio: Avoid concurrent runs of mmc_request_done()
-----BEGIN PGP SIGNATURE-----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=ME/e
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Drop the use of BLK_BOUNCE_HIGH
- Fix partition switch for GP3
- Remove usage of the deprecated ida_simple API
MMC host:
- cqhci: Update bouncing email-addresses in MAINTAINERS
- davinci_mmc: Use sg_miter for PIO
- dw_mmc-hi3798cv200: Convert the DT bindings to YAML
- dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant
- fsl-imx-esdhc: A couple of corrections/updates to the DT bindings
- meson-mx-sdhc: Drop use of the ->card_hw_reset() callback
- moxart-mmc: Use sg_miter for PIO
- moxart-mmc: Fix accounting for DMA transfers
- mvsdio: Use sg_miter for PIO
- mxcmmc: Use sg_miter for PIO
- omap: Use sg_miter for PIO
- renesas,sdhi: Add support for R-Car V4M variant
- sdhci-esdhc-mcf: Use sg_miter for swapping
- sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants
- sh_mmcif: Use sg_miter for PIO
- tmio: Avoid concurrent runs of mmc_request_done()"
* tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (44 commits)
mmc: core: make mmc_host_class constant
mmc: core: Fix switch on gp3 partition
mmc: tmio: comment the ERR_PTR usage in this driver
mmc: mmc_spi: Don't mention DMA direction
mmc: dw_mmc: Remove unused of_gpio.h
mmc: dw_mmc: add support for hi3798mv200
dt-bindings: mmc: hisilicon,hi3798cv200-dw-mshc: add Hi3798MV200 binding
dt-bindings: mmc: dw-mshc-hi3798cv200: convert to YAML
mmc: dw_mmc-hi3798cv200: remove MODULE_ALIAS()
mmc: core: Use a struct device* as in-param to mmc_of_parse_clk_phase()
mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function
mmc: tmio: avoid concurrent runs of mmc_request_done()
dt-bindings: mmc: fsl-imx-mmc: Document the required clocks
mmc: sh_mmcif: Advance sg_miter before reading blocks
mmc: sh_mmcif: sg_miter must not be atomic
mmc: sdhci-esdhc-mcf: Flag the sg_miter as atomic
dt-bindings: mmc: fsl-imx-esdhc: add default and 100mhz state
mmc: core: constify the struct device_type usage
mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002
dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo CV1800B and SG2002 support
...
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the mmc_host_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-mmc-v1-1-4a66e7122ff3@marliere.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit e7794c14fd ("mmc: rpmb: fixes pause retune on all RPMB
partitions.") added a mask check for 'part_type', but the mask used was
wrong leading to the code intended for rpmb also being executed for GP3.
On some MMCs (but not all) this would make gp3 partition inaccessible:
armadillo:~# head -c 1 < /dev/mmcblk2gp3
head: standard input: I/O error
armadillo:~# dmesg -c
[ 422.976583] mmc2: running CQE recovery
[ 423.058182] mmc2: running CQE recovery
[ 423.137607] mmc2: running CQE recovery
[ 423.137802] blk_update_request: I/O error, dev mmcblk2gp3, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[ 423.237125] mmc2: running CQE recovery
[ 423.318206] mmc2: running CQE recovery
[ 423.397680] mmc2: running CQE recovery
[ 423.397837] blk_update_request: I/O error, dev mmcblk2gp3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 423.408287] Buffer I/O error on dev mmcblk2gp3, logical block 0, async page read
the part_type values of interest here are defined as follow:
main 0
boot0 1
boot1 2
rpmb 3
gp0 4
gp1 5
gp2 6
gp3 7
so mask with EXT_CSD_PART_CONFIG_ACC_MASK (7) to correctly identify rpmb
Fixes: e7794c14fd ("mmc: rpmb: fixes pause retune on all RPMB partitions.")
Cc: stable@vger.kernel.org
Cc: Jorge Ramirez-Ortiz <jorge@foundries.io>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240306-mmc-partswitch-v1-1-bf116985d950@codewreck.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Parsing dt usually happens very early, sometimes even before the struct
mmc_host has been allocated (e.g. dw_mci_probe() and dw_mci_parse_dt() in
dw_mmc.c). Looking at the source of mmc_of_parse_clk_phase(), it's actually
not needed to have an initialized mmc_host, let's therefore pass a struct
device* to it instead.
Also update the only current user, sdhci-of-aspeed.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-1-10c03f316285@outlook.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the sdio_type,
sd_type and mmc_type variables to be constant structures as well, placing
it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240219-device_cleanup-mmc-v1-1-1910e283cf5a@marliere.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pass the queue limit set at initialization time directly to
blk_mq_alloc_disk instead of updating it right after the allocation.
This requires refactoring the code a bit so that what was mmc_setup_queue
before also allocates the gendisk now and actually sets all limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240215070300.2200308-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Initializing an eMMC that's connected via a 1-bit bus is current failing,
if the HW (DT) informs that 4-bit bus is supported. In fact this is a
regression, as we were earlier capable of falling back to 1-bit mode, when
switching to 4/8-bit bus failed. Therefore, let's restore the behaviour.
Log for Samsung eMMC 5.1 chip connected via 1bit bus (only D0 pin)
Before patch:
[134509.044225] mmc0: switch to bus width 4 failed
[134509.044509] mmc0: new high speed MMC card at address 0001
[134509.054594] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134509.281602] mmc0: switch to bus width 4 failed
[134509.282638] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.282657] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284598] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.284602] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284609] ldm_validate_partition_table(): Disk read failed.
[134509.286495] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.286500] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.288303] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.288308] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289540] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.289544] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289553] mmcblk0: unable to read partition table
[134509.289728] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134509.290283] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB
[134509.294577] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[134509.295835] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.295841] Buffer I/O error on dev mmcblk0, logical block 0, async page read
After patch:
[134551.089613] mmc0: switch to bus width 4 failed
[134551.090377] mmc0: new high speed MMC card at address 0001
[134551.102271] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134551.113365] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
[134551.114262] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134551.114925] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB
Fixes: 577fb13199 ("mmc: rework selection of bus speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Semenov <ivan@semenov.dev>
Link: https://lore.kernel.org/r/20240206172845.34316-1-ivan@semenov.dev
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pass a queue_limits to blk_mq_alloc_disk and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the driver core can properly handle constant struct bus_type,
move the sdio_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-mmc-v1-3-ad054dce8dc3@marliere.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that the driver core can properly handle constant struct bus_type,
move the mmc_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-mmc-v1-2-ad054dce8dc3@marliere.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that the driver core can properly handle constant struct bus_type,
move the mmc_rpmb_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-mmc-v1-1-ad054dce8dc3@marliere.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The MMC core sets BLK_BOUNCE_HIGH for devices where dma_mask
is unassigned.
For the majority of MMC hosts this path is never taken: the
OF core will unconditionally assign a 32-bit mask to any
OF device, and most MMC hosts are probed from device tree,
see drivers/of/platform.c:
of_platform_device_create_pdata()
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (!dev->dev.dma_mask)
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
of_amba_device_create()
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
MMC devices that are probed from ACPI or PCI will likewise
have a proper dma_mask assigned.
The only remaining devices that could have a blank dma_mask
are platform devices instantiated from board files.
These are mostly used on systems without CONFIG_HIGHMEM
enabled which means the block layer will not bounce, and in
the few cases where it is enabled it is not used anyway:
for example some OMAP2 systems such as Nokia n800/n810 will
create a platform_device and not assign a dma_mask, however
they do not have any highmem, so no bouncing will happen
anyway: the block core checks if max_low_pfn >= max_pfn
and this will always be false.
Should it turn out there is a platform_device with blank
DMA mask actually using CONFIG_HIGHMEM somewhere out there
we should set dma_mask for it, not do this trickery.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240125-mmc-no-blk-bounce-high-v1-1-d0f92a30e085@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range()/ida_alloc_max() is inclusive. So a -1 has been added when
needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/583c57d0ae09f9d3a1e1a7b80c1e39ada17954b7.1705244502.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This change uses the appropriate _cansleep or non-sleeping API for
reading GPIO read-only state. This allows users with GPIOs that
never sleepbeing called in atomic context.
Implement the same mechanism as in commit 52af318c93 ("mmc: Allow
non-sleeping GPIO cd").
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240206083912.2543142-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty core
and drivers in here, along with the usual set of rs485 updates (someday
this might work properly...) Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeUaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykyOgCgp1uhP/b9iW6qM7qL6OYEG6idI0kAnj0VASNm
vSI69HmdKKwo69YLOSBp
=14n1
-----END PGP SIGNATURE-----
Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty
core and drivers in here, along with the usual set of rs485 updates
(someday this might work properly...)
Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
serial: sc16is7xx: refactor EFR lock
serial: sc16is7xx: reorder code to remove prototype declarations
serial: sc16is7xx: refactor FIFO access functions to increase commonality
serial: sc16is7xx: drop unneeded MODULE_ALIAS
serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
serial: sc16is7xx: add explicit return for some switch default cases
serial: sc16is7xx: add macro for max number of UART ports
serial: sc16is7xx: add driver name to struct uart_driver
serial: sc16is7xx: use i2c_get_match_data()
serial: sc16is7xx: use spi_get_device_match_data()
serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
serial: sc16is7xx: set safe default SPI clock frequency
serial: sc16is7xx: add check for unsupported SPI modes during probe
serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
serial: 8250_exar: Set missing rs485_supported flag
serial: omap: do not override settings for RS485 support
serial: core, imx: do not set RS485 enabled if it is not supported
serial: core: make sure RS485 cannot be enabled when it is not supported
...
Requesting a retune before switching to the RPMB partition has been
observed to cause CRC errors on the RPMB reads (-EILSEQ).
Since RPMB reads can not be retried, the clients would be directly
affected by the errors.
This commit disables the retune request prior to switching to the RPMB
partition: mmc_retune_pause() no longer triggers a retune before the
pause period begins.
This was verified with the sdhci-of-arasan driver (ZynqMP) configured
for HS200 using two separate eMMC cards (DG4064 and 064GB2). In both
cases, the error was easy to reproduce triggering every few tenths of
reads.
With this commit, systems that were utilizing OP-TEE to access RPMB
variables will experience an enhanced performance. Specifically, when
OP-TEE is configured to employ RPMB as a secure storage solution, it not
only writes the data but also the secure filesystem within the
partition. As a result, retrieving any variable involves multiple RPMB
reads, typically around five.
For context, on ZynqMP, each retune request consumed approximately
8ms. Consequently, reading any RPMB variable used to take at the very
minimum 40ms.
After droping the need to retune before switching to the RPMB partition,
this is no longer the case.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Acked-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240103112911.2954632-1-jorge@foundries.io
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
During the initialization to HS400es stage, add a HS400 tuning flow as an
optional process. For Mediatek IP, the HS400es mode requires a specific
tuning to ensure the correct HS400 timing setting.
Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
Link: https://lore.kernel.org/r/20231225093839.22931-2-mengqi.zhang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The eMMC card can be set into write-protected mode to prevent data from
being accidentally modified or deleted. Wp_grp_size (Write Protect Group
Size) refers to an attribute of the eMMC card, used to manage write
protection and is the CSD register [36:32] of the eMMC device. Wp_grp_size
(Write Protect Group Size) indicates how many eMMC blocks are contained in
each write protection group on the eMMC card.
To allow userspace easy access of the CSD register bits, let's add sysfs
node "wp_grp_size".
Signed-off-by: Lin Gui <lin.gui@mediatek.com>
Signed-off-by: Bo Ye <bo.ye@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231218230532.82427-1-bo.ye@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a test to repeatedly re-tune in between random reads. The test is
non-destructive of data on the card and runs for 30 seconds. It can be
repeated to test for longer durations.
If re-tuning is not supported, the test is skipped.
Example:
# echo 'mmc1:0001' > /sys/bus/mmc/drivers/mmcblk/unbind
# echo 'mmc1:0001' > /sys/bus/mmc/drivers/mmc_test/bind
[ 36.642257] mmc_test mmc1:0001: Card claimed for testing.
# cat /sys/kernel/debug/mmc1/mmc1\:0001/testlist | grep tuning
52: Re-tuning reliability
# echo 52 > /sys/kernel/debug/mmc1/mmc1\:0001/test
[ 91.522555] mmc1: Starting tests of card mmc1:0001...
[ 91.528425] mmc1: Test case 52. Re-tuning reliability...
[ 121.536682] mmc1: Result: OK
[ 121.539572] mmc1: Tests completed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20231214090902.43628-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
tty_operations::send_xchar is one of the last users of 'char' type for
characters in the tty layer. Convert it to u8 now.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-bluetooth@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20231206073712.17776-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sdio_in() returns a value returned from sdio_readb(). The latter returns
u8. So should the former. Therefore, switch sdio_in() return type to u8
and all its callers too.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Link: https://lore.kernel.org/r/20231206073712.17776-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.8.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.8.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When RPMB was converted to a character device, it added support for
multiple RPMB partitions (Commit 97548575be ("mmc: block: Convert RPMB to
a character device").
One of the changes in this commit was transforming the variable target_part
defined in __mmc_blk_ioctl_cmd into a bitmask. This inadvertently regressed
the validation check done in mmc_blk_part_switch_pre() and
mmc_blk_part_switch_post(), so let's fix it.
Fixes: 97548575be ("mmc: block: Convert RPMB to a character device")
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201153143.1449753-1-jorge@foundries.io
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Field Firmware Update (ffu) may use close-ended or open ended sequence.
Each such sequence is comprised of a write commands enclosed between 2
switch commands - to and from ffu mode. So for the close-ended case, it
will be: cmd6->cmd23-cmd25-cmd6.
Some host controllers however, get confused when multi-block rw is sent
without sbc, and may generate auto-cmd12 which breaks the ffu sequence.
I encountered this issue while testing fwupd (github.com/fwupd/fwupd)
on HP Chromebook x2, a qualcomm based QC-7c, code name - strongbad.
Instead of a quirk, or hooking the request function of the msm ops,
it would be better to fix the ioctl handling and make it use mrq.sbc
instead of issuing SET_BLOCK_COUNT separately.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231129092535.3278-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It is important that MMC_CMDQ_TASK_MGMT command to discard the queue is
successful because otherwise a subsequent reset might fail to flush the
cache first. Retry it and the previous STOP command.
Fixes: 72a5af554d ("mmc: core: Add support for handling CQE requests")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-5-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
STOP command does not guarantee to wait while busy, but subsequent command
MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so
be sure to wait by employing mmc_poll_for_busy().
Fixes: 72a5af554d ("mmc: core: Add support for handling CQE requests")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://lore.kernel.org/r/20231103084720.6886-4-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
During CQE error recovery, error-free data commands get requeued if there
is any data left to transfer, but non-data commands are completed even
though they have not been processed. Requeue them instead.
Note the only non-data command is cache flush, which would have resulted in
a cache flush being lost if it was queued at the time of CQE recovery.
Fixes: 1e8e55b670 ("mmc: block: Add CQE support")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Micron MTFC4GACAJCN eMMC supports cache but requires that flush cache
operation be allowed only after a write has occurred. Otherwise, the
cache flush command or subsequent commands will time out.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231030224809.59245-1-beanhuo@iokpp.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
During board verification, there is a need to test the various supported
eMMC/SD speed modes. However, since the framework chooses the best mode
supported by the card and the host controller's caps, this currently
necessitates changing the devicetree for every iteration.
Allow the various speed mode host capabilities to be modified via
debugfs in order to allow easier hardware verification. The values to
be written are the raw MMC_CAP* values from include/linux/mmc/host.h.
This is rather low-level, and these defines are not guaranteed to be
stable, but it is perhaps good enough for the intended use case.
MMC_CAP_AGGRESSIVE_PM can also be set, in order to be able to
re-initialize the card without having to physically remove and re-insert
it.
/sys/kernel/debug/mmc0# grep timing ios
timing spec: 9 (mmc HS200)
// Turn on MMC_CAP_AGGRESSIVE_PM and re-trigger runtime suspend
/sys/kernel/debug/mmc0# echo $(($(cat caps) | (1 << 7))) > caps
/sys/kernel/debug/mmc0# echo on > /sys/bus/mmc/devices/mmc0\:0001/power/control
/sys/kernel/debug/mmc0# echo auto > /sys/bus/mmc/devices/mmc0\:0001/power/control
// MMC_CAP2_HS200_1_8V_SDR
/sys/kernel/debug/mmc0# echo $(($(cat caps2) & ~(1 << 5))) > caps2
/sys/kernel/debug/mmc0# echo on > /sys/bus/mmc/devices/mmc0\:0001/power/control
/sys/kernel/debug/mmc0# grep timing ios
timing spec: 8 (mmc DDR52)
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20230929-mmc-caps-v2-2-11a4c2d94f15@axis.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
We want to allow host caps to be changed dynamically via debugfs, so for
these to have an effect, ensure that the card type reselection is always
applied even if the card is old.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20230929-mmc-caps-v2-1-11a4c2d94f15@axis.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.6-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.7.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The OEMID is an 8-bit binary number rather than 16-bit as the current code
parses for. The OEMID occupies bits [111:104] in the CID register, see the
eMMC spec JESD84-B51 paragraph 7.2.3. It seems that the 16-bit comes from
the legacy MMC specs (v3.31 and before).
Let's fix the parsing by simply move to use 8-bit instead of 16-bit. This
means we ignore the impact on some of those old MMC cards that may be out
there, but on the other hand this shouldn't be a problem as the OEMID seems
not be an important feature for these cards.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230927071500.1791882-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.6-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.7.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To allow dynamical updates of the current number of used in-flight
requests, let's move away from using a hard-coded value to a use a
corresponding variable in the struct mmc_host.
This can be valuable when optimizing for certain I/O request sequences, as
shown by subsequent changes.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Link: https://lore.kernel.org/r/20230919074707.25517-2-wenchao.chen@unisoc.com
[Ulf: Re-wrote the commitmsg to clarify the change]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Userspace has currently no way of checking the internal R1 response error
bits for some commands. This is a problem for some commands, like RPMB for
example. Typically, we may detect that the busy completion has successfully
ended, while in fact the card did not complete the requested operation.
To fix the problem, let's always poll with CMD13 for these commands and
during the polling, let's also aggregate the R1 response bits. Before
completing the ioctl request, let's propagate the R1 response bits too.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230913112921.553019-1-ulf.hansson@linaro.org
tuning only support in 4-bit mode or 8 bit mode, so in 1-bit mode,
need to hold retuning.
Find this issue when use manual tuning method on imx93. When system
resume back, SDIO WIFI try to switch back to 4 bit mode, first will
trigger retuning, and all tuning command failed.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: dfa13ebbe3 ("mmc: host: Add facility to support re-tuning")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230830093922.3095850-1-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported issues.
The last bit of cleanups from Jiri and the tty structure size reduction
came in last week, a bit late but as they were just style changes and
size reductions, I figured they should get into this merge cycle so that
others can work on top of them with no merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH+jA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKyACgldt6QeenTN+6dXIHS/eQHtTKZwMAn3arSeXI
QrUUnLFjOWyoX87tbMBQ
=LVw0
-----END PGP SIGNATURE-----
Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported
issues. The last bit of cleanups from Jiri and the tty structure size
reduction came in last week, a bit late but as they were just style
changes and size reductions, I figured they should get into this merge
cycle so that others can work on top of them with no merge conflicts"
* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
tty: shrink the size of struct tty_struct by 40 bytes
tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
tty: n_tty: extract ECHO_OP processing to a separate function
tty: n_tty: unify counts to size_t
tty: n_tty: use u8 for chars and flags
tty: n_tty: simplify chars_in_buffer()
tty: n_tty: remove unsigned char casts from character constants
tty: n_tty: move newline handling to a separate function
tty: n_tty: move canon handling to a separate function
tty: n_tty: use MASK() for masking out size bits
tty: n_tty: make n_tty_data::num_overrun unsigned
tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
tty: n_tty: use 'num' for writes' counts
tty: n_tty: use output character directly
tty: n_tty: make flow of n_tty_receive_buf_common() a bool
Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
Documentation: devices.txt: Fix minors for ttyCPM*
Documentation: devices.txt: Remove ttySIOC*
Documentation: devices.txt: Remove ttyIOC*
serial: 8250_bcm7271: improve bcm7271 8250 port
...
To support the need for host specific tuning for SD high-speed mode, let's
add two new optional callbacks, ->prepare|execute_sd_hs_tuning() and let's
call them when switching into the SD high-speed mode.
Note that, during the tuning process it's also needed for host drivers to
send commands to the SD card to verify that the tuning process succeeds.
Therefore, let's also share the corresponding functions from the core to
allow this.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Link: https://lore.kernel.org/r/20230825091743.15613-2-wenchao.chen@unisoc.com
[Ulf: Dropped unnecessary function declarations and updated the commit msg]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230727070051.17778-55-frank.li@vivo.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230727070051.17778-54-frank.li@vivo.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
