This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have
a pile of annotation, unused variable and minor updates. The big API
change is the updates for Christoph's DMA rework which include
removing the DISABLE_CLUSTERING flag. And finally there are a couple
of target tree updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXCEUNiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdjKAP9vrTTv
qFaYmAoRSbPq9ZiixaXLMy0K/6o76Uay0gnBqgD/fgn3jg/KQ6alNaCjmfeV3wAj
u1j3H7tha9j1it+4pUw=
=GDa+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.
Additionally, we have a pile of annotation, unused variable and minor
updates.
The big API change is the updates for Christoph's DMA rework which
include removing the DISABLE_CLUSTERING flag.
And finally there are a couple of target tree updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
scsi: isci: request: mark expected switch fall-through
scsi: isci: remote_node_context: mark expected switch fall-throughs
scsi: isci: remote_device: Mark expected switch fall-throughs
scsi: isci: phy: Mark expected switch fall-through
scsi: iscsi: Capture iscsi debug messages using tracepoints
scsi: myrb: Mark expected switch fall-throughs
scsi: megaraid: fix out-of-bound array accesses
scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
scsi: fcoe: remove set but not used variable 'port'
scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
scsi: smartpqi: fix build warnings
scsi: smartpqi: update driver version
scsi: smartpqi: add ofa support
scsi: smartpqi: increase fw status register read timeout
scsi: smartpqi: bump driver version
scsi: smartpqi: add smp_utils support
scsi: smartpqi: correct lun reset issues
scsi: smartpqi: correct volume status
scsi: smartpqi: do not offline disks for transient did no connect conditions
scsi: smartpqi: allow for larger raid maps
...
Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page. Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This removes the legacy (non-mq) IO path for SCSI.
Cc: linux-scsi@vger.kernel.org
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the
continuing absence of Nic we have target updates for tcmu and target
core (all with reviews and acks). The biggest observable change is
going to be that we're (again) trying to switch to mulitqueue as the
default (a user can still override the setting on the kernel command
line). Other major core stuff is the removal of the remaining
Microchannel drivers, an update of the internal timers and some
reworks of completion and result handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW3R3niYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishauRAP4yfBKK
dbxF81c/Bxi/Stk16FWkOOrjs4CizwmnMcpM5wD/UmM9o6ebDzaYpZgA8wIl7X/N
o/JckEZZpIp+5NySZNc=
=ggLB
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr.
In addition, with the continuing absence of Nic we have target updates
for tcmu and target core (all with reviews and acks).
The biggest observable change is going to be that we're (again) trying
to switch to mulitqueue as the default (a user can still override the
setting on the kernel command line).
Other major core stuff is the removal of the remaining Microchannel
drivers, an update of the internal timers and some reworks of
completion and result handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
scsi: ufs: remove unnecessary query(DM) UPIU trace
scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
scsi: aacraid: Spelling fix in comment
scsi: mpt3sas: Fix calltrace observed while running IO & reset
scsi: aic94xx: fix an error code in aic94xx_init()
scsi: st: remove redundant pointer STbuffer
scsi: qla2xxx: Update driver version to 10.00.00.08-k
scsi: qla2xxx: Migrate NVME N2N handling into state machine
scsi: qla2xxx: Save frame payload size from ICB
scsi: qla2xxx: Fix stalled relogin
scsi: qla2xxx: Fix race between switch cmd completion and timeout
scsi: qla2xxx: Fix Management Server NPort handle reservation logic
scsi: qla2xxx: Flush mailbox commands on chip reset
scsi: qla2xxx: Fix unintended Logout
scsi: qla2xxx: Fix session state stuck in Get Port DB
scsi: qla2xxx: Fix redundant fc_rport registration
scsi: qla2xxx: Silent erroneous message
scsi: qla2xxx: Prevent sysfs access when chip is down
scsi: qla2xxx: Add longer window for chip reset
...
-----BEGIN PGP SIGNATURE-----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=b9ib
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"First pull request for this merge window, there will also be a
followup request with some stragglers.
This pull request contains:
- Fix for a thundering heard issue in the wbt block code (Anchal
Agarwal)
- A few NVMe pull requests:
* Improved tracepoints (Keith)
* Larger inline data support for RDMA (Steve Wise)
* RDMA setup/teardown fixes (Sagi)
* Effects log suppor for NVMe target (Chaitanya Kulkarni)
* Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
* TP4004 (ANA) support (Christoph)
* Various NVMe fixes
- Block io-latency controller support. Much needed support for
properly containing block devices. (Josef)
- Series improving how we handle sense information on the stack
(Kees)
- Lightnvm fixes and updates/improvements (Mathias/Javier et al)
- Zoned device support for null_blk (Matias)
- AIX partition fixes (Mauricio Faria de Oliveira)
- DIF checksum code made generic (Max Gurtovoy)
- Add support for discard in iostats (Michael Callahan / Tejun)
- Set of updates for BFQ (Paolo)
- Removal of async write support for bsg (Christoph)
- Bio page dirtying and clone fixups (Christoph)
- Set of bcache fix/changes (via Coly)
- Series improving blk-mq queue setup/teardown speed (Ming)
- Series improving merging performance on blk-mq (Ming)
- Lots of other fixes and cleanups from a slew of folks"
* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
blkcg: Make blkg_root_lookup() work for queues in bypass mode
bcache: fix error setting writeback_rate through sysfs interface
null_blk: add lock drop/acquire annotation
Blk-throttle: reduce tail io latency when iops limit is enforced
block: paride: pd: mark expected switch fall-throughs
block: Ensure that a request queue is dissociated from the cgroup controller
block: Introduce blk_exit_queue()
blkcg: Introduce blkg_root_lookup()
block: Remove two superfluous #include directives
blk-mq: count the hctx as active before allocating tag
block: bvec_nr_vecs() returns value for wrong slab
bcache: trivial - remove tailing backslash in macro BTREE_FLAG
bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
bcache: set max writeback rate when I/O request is idle
bcache: add code comments for bset.c
bcache: fix mistaken comments in request.c
bcache: fix mistaken code comments in bcache.h
bcache: add a comment in super.c
bcache: avoid unncessary cache prefetch bch_btree_node_get()
bcache: display rate debug parameters to 0 when writeback is not running
...
Pull vfs open-related updates from Al Viro:
- "do we need fput() or put_filp()" rules are gone - it's always fput()
now. We keep track of that state where it belongs - in ->f_mode.
- int *opened mess killed - in finish_open(), in ->atomic_open()
instances and in fs/namei.c code around do_last()/lookup_open()/atomic_open().
- alloc_file() wrappers with saner calling conventions are introduced
(alloc_file_clone() and alloc_file_pseudo()); callers converted, with
much simplification.
- while we are at it, saner calling conventions for path_init() and
link_path_walk(), simplifying things inside fs/namei.c (both on
open-related paths and elsewhere).
* 'work.open3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
few more cleanups of link_path_walk() callers
allow link_path_walk() to take ERR_PTR()
make path_init() unconditionally paired with terminate_walk()
document alloc_file() changes
make alloc_file() static
do_shmat(): grab shp->shm_file earlier, switch to alloc_file_clone()
new helper: alloc_file_clone()
create_pipe_files(): switch the first allocation to alloc_file_pseudo()
anon_inode_getfile(): switch to alloc_file_pseudo()
hugetlb_file_setup(): switch to alloc_file_pseudo()
ocxlflash_getfile(): switch to alloc_file_pseudo()
cxl_getfile(): switch to alloc_file_pseudo()
... and switch shmem_file_setup() to alloc_file_pseudo()
__shmem_file_setup(): reorder allocations
new wrapper: alloc_file_pseudo()
kill FILE_{CREATED,OPENED}
switch atomic_open() and lookup_open() to returning 0 in all success cases
document ->atomic_open() changes
->atomic_open(): return 0 in all success cases
get rid of 'opened' in path_openat() and the helpers downstream
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltU8z0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5X8H/2fJr7m3k242+t76
sitwvx1eoPqTgryW59dRKm9IuXAGA+AjauvHzaz1QxomeQa50JghGWefD0eiJfkA
1AphQ/24EOiAbbVk084dAI/C2p122dE4D5Fy7CrfLnuouyrbFaZI5STbnrRct7sR
9deeYW0GDHO1Uenp4WDCj0baaqJqaevZ+7GG09DnWpya2nQtSkGBjqn6GpYmrfOU
mqFuxAX8mEOW6cwK16y/vYtnVjuuMAiZ63/OJ8AQ6d6ArGLwAsdn7f8Fn4I4tEr2
L0d3CRLUyegms4++Dmlu05k64buQu46WlPhjCZc5/Ts4kjrNxBuHejj2/jeSnUSt
vJJlibI=
=42a5
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rc6' into for-4.19/block2
Pull in 4.18-rc6 to get the NVMe core AEN change to avoid a
merge conflict down the line.
Signed-of-by: Jens Axboe <axboe@kernel.dk>
This removes the unused sense buffer in read_cap16() and write_same16().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull vfs fixes from Al Viro:
"Fix several places that screw up cleanups after failures halfway
through opening a file (one open-coding filp_clone_open() and getting
it wrong, two misusing alloc_file()). That part is -stable fodder from
the 'work.open' branch.
And Christoph's regression fix for uapi breakage in aio series;
include/uapi/linux/aio_abi.h shouldn't be pulling in the kernel
definition of sigset_t, the reason for doing so in the first place had
been bogus - there's no need to expose struct __aio_sigset in
aio_abi.h at all"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: don't expose __aio_sigset in uapi
ocxlflash_getfile(): fix double-iput() on alloc_file() failures
cxl_getfile(): fix double-iput() on alloc_file() failures
drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open()
... so that it could set both ->f_flags and ->f_mode, without callers
having to set ->f_flags manually.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit cd43c221bb ("scsi: cxlflash: Isolate external module
dependencies") introduced the use of ifdefs to avoid compilation errors
when one of the possible backend driver, CXL or OCXL, is not compiled.
Unfortunately, the wrong defines are used and the backend ops are never
assigned, leading to a kernel crash in any case when the cxlflash module is
loaded.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a distinct
type.
Ref-> commit 1c8f422059 ("mm: change return type to vm_fault_t")
Previously, VM_FAULT_NOPAGE was returned without verifying return value of
vm_insert_pfn. The new inline vmf_insert_pfn() will address this issue by
returning correct VM_FAULT_* type from fault handler.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Depending on the underlying transport, cxlflash has a dependency on either
the CXL or OCXL drivers, which are enabled via their Kconfig option.
Instead of having a module wide dependency on these config options, it is
better to isolate the object modules that are dependent on the CXL and OCXL
drivers and adjust the module dependencies accordingly.
This commit isolates the object files that are dependent on CXL and/or
OCXL. The cxl/ocxl fops used in the core driver are tucked under an ifdef to
avoid compilation errors.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As a staging cleanup to support transport specific builds of the cxlflash
module, relocate device dependent assignments to header files. This will
avoid littering the core driver with conditional compilation logic.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The new header file, backend.h, that was recently added is missing the
include guards. This commit adds the guards.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
AFUs can only process a single AFU command at a time. This is enforced with
a global mutex situated within the AFU send routine. As this mutex has a
global scope, it has the potential to unnecessarily block commands destined
for other AFUs.
Instead of using a global mutex, transition the mutex to be per-AFU. This
will allow commands to only be blocked by siblings of the same AFU.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a superpipe process that makes use of virtual LUNs is terminated or
killed abruptly, there is a possibility that the cxlflash driver could hang
and deprive other operations on the adapter.
The release fop registered to be invoked on a context close, detaches every
LUN associated with the context. The underlying service to detach the LUN
assumes it has been called with the read semaphore held, and releases the
semaphore before any operation that could be time consuming.
When invoked without holding the read semaphore, an opportunity is created
for the semaphore's count to become negative when it is temporarily released
during one of these potential lengthy operations. This negative count
results in subsequent acquisition attempts taking forever, leading to the
hang.
To support the current design point of holding the semaphore on the ioctl()
paths, the release fop should acquire it before invoking any ioctl services.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The kernel log can get filled with debug messages from send_cmd_ioarrin()
when dynamic debug is enabled for the cxlflash module and there is a lot of
legacy I/O traffic.
While these messages are necessary to debug issues that involve command
tracking, the abundance of data can overwrite other useful data in the
log. The best option available is to limit the messages that should serve
most of the common use cases.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following Oops may be encountered if the device is reset, i.e. EEH
recovery, while there is heavy I/O traffic:
59:mon> t
[c000200db64bb680] c008000009264c40 cxlflash_queuecommand+0x3b8/0x500
[cxlflash]
[c000200db64bb770] c00000000090d3b0 scsi_dispatch_cmd+0x130/0x2f0
[c000200db64bb7f0] c00000000090fdd8 scsi_request_fn+0x3c8/0x8d0
[c000200db64bb900] c00000000067f528 __blk_run_queue+0x68/0xb0
[c000200db64bb930] c00000000067ab80 __elv_add_request+0x140/0x3c0
[c000200db64bb9b0] c00000000068daac blk_execute_rq_nowait+0xec/0x1a0
[c000200db64bba00] c00000000068dbb0 blk_execute_rq+0x50/0xe0
[c000200db64bba50] c0000000006b2040 sg_io+0x1f0/0x520
[c000200db64bbaf0] c0000000006b2e94 scsi_cmd_ioctl+0x534/0x610
[c000200db64bbc20] c000000000926208 sd_ioctl+0x118/0x280
[c000200db64bbcc0] c00000000069f7ac blkdev_ioctl+0x7fc/0xe30
[c000200db64bbd20] c000000000439204 block_ioctl+0x84/0xa0
[c000200db64bbd40] c0000000003f8514 do_vfs_ioctl+0xd4/0xa00
[c000200db64bbde0] c0000000003f8f04 SyS_ioctl+0xc4/0x130
[c000200db64bbe30] c00000000000b184 system_call+0x58/0x6c
When there is no room to send the I/O request, the cached room is refreshed
by reading the memory mapped command room value from the AFU. The AFU
register mapping is refreshed during a reset, creating a race condition that
can lead to the Oops above.
During a device reset, the AFU should not be unmapped until all the active
send threads quiesce. An atomic counter, cmds_active, is currently used to
track internal AFU commands and quiesce during reset. This same counter can
also be used for the active send threads.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following Oops can occur when there is heavy I/O traffic and the host is
reset by a tool such as sg_reset.
[c000200fff3fbc90] c00800001690117c process_cmd_doneq+0x104/0x500
[cxlflash] (unreliable)
[c000200fff3fbd80] c008000016901648 cxlflash_rrq_irq+0xd0/0x150 [cxlflash]
[c000200fff3fbde0] c000000000193130 __handle_irq_event_percpu+0xa0/0x310
[c000200fff3fbea0] c0000000001933d8 handle_irq_event_percpu+0x38/0x90
[c000200fff3fbee0] c000000000193494 handle_irq_event+0x64/0xb0
[c000200fff3fbf10] c000000000198ea0 handle_fasteoi_irq+0xc0/0x230
[c000200fff3fbf40] c00000000019182c generic_handle_irq+0x4c/0x70
[c000200fff3fbf60] c00000000001794c __do_irq+0x7c/0x1c0
[c000200fff3fbf90] c00000000002a390 call_do_irq+0x14/0x24
[c000200e5828fab0] c000000000017b2c do_IRQ+0x9c/0x130
[c000200e5828fb00] c000000000009b04 h_virt_irq_common+0x114/0x120
When a context is reset, the pending commands are flushed and the AFU is
notified. Before the AFU handles this request there could be command
completion interrupts queued to PHB which are yet to be delivered to the
context. In this scenario, a context could receive an interrupt for a command
that has been flushed, leading to a possible crash when the memory for the
flushed command is accessed.
To resolve this problem, a boolean will indicate if the hardware queue is
ready to process interrupts or not. This can be evaluated in the interrupt
handler before proessing an interrupt.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following Oops can occur if an internal command sent to the AFU does not
complete within the timeout:
[c000000ff101b810] c008000016020d94 term_mc+0xfc/0x1b0 [cxlflash]
[c000000ff101b8a0] c008000016020fb0 term_afu+0x168/0x280 [cxlflash]
[c000000ff101b930] c0080000160232ec cxlflash_pci_error_detected+0x184/0x230
[cxlflash]
[c000000ff101b9e0] c00800000d95d468 cxl_vphb_error_detected+0x90/0x150[cxl]
[c000000ff101ba20] c00800000d95f27c cxl_pci_error_detected+0xa4/0x240 [cxl]
[c000000ff101bac0] c00000000003eaf8 eeh_report_error+0xd8/0x1b0
[c000000ff101bb20] c00000000003d0b8 eeh_pe_dev_traverse+0x98/0x170
[c000000ff101bbb0] c00000000003f438 eeh_handle_normal_event+0x198/0x580
[c000000ff101bc60] c00000000003fba4 eeh_handle_event+0x2a4/0x338
[c000000ff101bd10] c0000000000400b8 eeh_event_handler+0x1f8/0x200
[c000000ff101bdc0] c00000000013da48 kthread+0x1a8/0x1b0
[c000000ff101be30] c00000000000b528 ret_from_kernel_thread+0x5c/0xb4
When an internal command times out, the command buffer is freed while it is
still in the pending commands list of the context. This corrupts the list and
when the context is cleaned up, a crash is encountered.
To resolve this issue, when an AFU command or TMF command times out, the
command should be deleted from the hardware queue pending command list before
freeing the buffer.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following Oops can be encountered if a device removal or system shutdown
is initiated while an EEH recovery is in process:
[c000000ff2f479c0] c008000015256f18 cxlflash_pci_slot_reset+0xa0/0x100
[cxlflash]
[c000000ff2f47a30] c00800000dae22e0 cxl_pci_slot_reset+0x168/0x290 [cxl]
[c000000ff2f47ae0] c00000000003ef1c eeh_report_reset+0xec/0x170
[c000000ff2f47b20] c00000000003d0b8 eeh_pe_dev_traverse+0x98/0x170
[c000000ff2f47bb0] c00000000003f80c eeh_handle_normal_event+0x56c/0x580
[c000000ff2f47c60] c00000000003fba4 eeh_handle_event+0x2a4/0x338
[c000000ff2f47d10] c0000000000400b8 eeh_event_handler+0x1f8/0x200
[c000000ff2f47dc0] c00000000013da48 kthread+0x1a8/0x1b0
[c000000ff2f47e30] c00000000000b528 ret_from_kernel_thread+0x5c/0xb4
The remove handler frees AFU memory while the EEH recovery is in progress,
leading to a race condition. This can result in a crash if the recovery thread
tries to access this memory.
To resolve this issue, the cxlflash remove handler will evaluate the device
state and yield to any active reset or probing threads.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit enables the OCXL operations for the OCXL devices.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The cxlflash core driver resets the AFU when the master contexts are created
in the initialization or recovery paths. Today, the OCXL provider service to
perform this operation is pending implementation. To avoid a crash due to a
missing fop, log an error once and return success to continue with execution.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While enabling a context on the link, a predefined callback can be registered
with the OCXL provider services to be notified on translation errors. These
errors can in turn be passed back to the user on a read operation.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In order to protect the OCXL hardware contexts from getting clobbered, a
simple state machine is added to indicate when a context is in open, close or
start state. The expected states are validated throughout the code to prevent
illegal operations on a context. A mutex is added to protect writes to the
context state field.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SISLite specification has been updated to define new synchronous interrupt
status bits. These bits are set by the AFU when a given PASID or EA is bad and
a synchronous interrupt is triggered.
The SISLite header file is updated to support these new bits. Note that there
are also some formatting updates to some of the existing bits to allow all of
the definitions to line up uniformly.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Similar to user contexts, master contexts also require that the per-context
LISN registers be programmed for certain AFUs. The mapped trigger page is
obtained from underlying transport and registered with AFU for each master
context.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SISLite specification has been updated for OCXL to support communicating
data to generate AFU interrupts to the AFU. This includes a new capability bit
that is advertised for OCXL AFUs and new registers to hold the object handle
and translation PASID of each interrupt. For Power, the object handle is the
mapped trigger page. Note that because these mappings are kernel only, the
PASID of a kernel context must be used to satisfy the translation.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
OCXL requires that AFUs use an opaque object handle to represent an AFU
interrupt. The specification does not provide a common means to communicate
the object handle to the AFU - each AFU must define this within the AFU
specification. To support this model, the object handle must be passed back to
the core driver as it manages the AFU specification (SISLite) for cxlflash.
Note that for Power systems, the object handle is the effective address of the
trigger page.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The cxlflash core fop API requires a way to invoke the fault and release
handlers of underlying transports using their native file-based APIs. This
provides the core with the ability to insert selectively itself into the
processing stream of these operations for cleanup. Implement these two fops to
map and release when requested.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The cxlflash userspace API requires that users be able to mmap and release the
adapter context. Support mapping by implementing the AFU mmap fop to map the
context MMIO space and install the corresponding page table entry upon page
fault. Similarly, implement the AFU release fop to terminate and clean up the
context when invoked.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The cxlflash userspace API requires that users be able to read the adapter
context for any pending events or interrupts from the AFU. Support reading
various events by implementing the AFU read fop to copy out event data.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The cxlflash userspace API requires that users be able to poll the adapter
context for any pending events or interrupts from the AFU. Support polling on
various events by implementing the AFU poll fop using a waitqueue.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User contexts request interrupts and are started using the "start work"
interface. Populate the start_work() fop to allocate and map interrupts before
starting the user context. As part of starting the context, update the user
process identification logic to properly derive the data required by the
SPA. Also, introduce a skeleton interrupt handler using a bitmap, flag, and
spinlock to track interrupts. This handler will be expanded in future commits.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support to map and unmap the irq space and manage irq registrations with
the kernel for each allocated AFU interrupt. Also support mapping the physical
trigger page to obtain an effective address that will be provided to the
cxlflash core in a future commit.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support to allocate and free AFU interrupts using the OCXL provider
services. The trigger page returned upon successful allocation will be mapped
and exposed to the cxlflash core in a future commit.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As part of the context lifecycle, the associated process element within the
Shared Process Area (SPA) of the link must be updated. Each process is defined
by various parameters (pid, tid, PASID mm) that are stored in the SPA upon
starting a context and invalidated when a context is stopped.
Use the OCXL provider services to configure the SPA with the appropriate data
that is unique to the process when starting a context. Initially only kernel
contexts are supported and therefore these process values are not applicable.
Note that the OCXL service used has an optional callback for translation fault
error notification. While not used here, it will be expanded in a future
commit.
Also add a service to stop a context by terminating the corresponding PASID
and remove the process element from the SPA.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The first function of the link needs to configure the transaction layer
between the host and device. This is accomplished by a call to the OCXL
provider services.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After reading and modifying the function configuration, setup the OCXL link
using the OCXL provider services. The link is released when the adapter is
unconfigured.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the PCI VPD services to support reading the VPD data of the underlying
adapter.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The AFU should be enabled following a successful configuration and disabled
near the end of the cleanup path.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Once the context is started, the assigned MMIO space can be mapped and
unmapped. Provide means to map and unmap the context MMIO space.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Once the adapter context is created, it needs to be started by assigning the
MMIO space for the context and by enabling the process element in the
link. This commit adds the skeleton for starting the context and assigns the
context specific MMIO space. Master contexts have access to the global MMIO
space while the rest have access to the context specific space.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the AFU is configured, the global and per process MMIO regions are
presented by the configuration space. Save these regions and map the global
MMIO region that is used to access all of the control and provisioning data in
the AFU.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On a PERST, the AFU image can be reloaded or left intact. Provide means to set
this image reload policy.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Provide means to obtain the process element of an adapter context as well as
locate an adapter context by file.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allocate a file descriptor for an adapter context when requested. In order to
allocate inodes for the file descriptors, a pseudo filesystem is created and
used.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
