Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave.
My test was also able to trigger lockdep output:
============================================
WARNING: possible recursive locking detected
5.6.0-rc6+ #6 Not tainted
--------------------------------------------
sched-messaging/2767 is trying to acquire lock:
ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0
but task is already holding lock:
ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(kretprobe_table_locks[i].lock));
lock(&(kretprobe_table_locks[i].lock));
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by sched-messaging/2767:
#0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50
stack backtrace:
CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6
Call Trace:
dump_stack+0x96/0xe0
__lock_acquire.cold.57+0x173/0x2b7
? native_queued_spin_lock_slowpath+0x42b/0x9e0
? lockdep_hardirqs_on+0x590/0x590
? __lock_acquire+0xf63/0x4030
lock_acquire+0x15a/0x3d0
? kretprobe_hash_lock+0x52/0xa0
_raw_spin_lock_irqsave+0x36/0x70
? kretprobe_hash_lock+0x52/0xa0
kretprobe_hash_lock+0x52/0xa0
trampoline_handler+0xf8/0x940
? kprobe_fault_handler+0x380/0x380
? find_held_lock+0x3a/0x1c0
kretprobe_trampoline+0x25/0x50
? lock_acquired+0x392/0xbc0
? _raw_spin_lock_irqsave+0x50/0x70
? __get_valid_kprobe+0x1f0/0x1f0
? _raw_spin_unlock_irqrestore+0x3b/0x40
? finish_task_switch+0x4b9/0x6d0
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
The code within the kretprobe handler checks for probe reentrancy,
so we won't trigger any _raw_spin_lock_irqsave probe in there.
The problem is in outside kprobe_flush_task, where we call:
kprobe_flush_task
kretprobe_table_lock
raw_spin_lock_irqsave
_raw_spin_lock_irqsave
where _raw_spin_lock_irqsave triggers the kretprobe and installs
kretprobe_trampoline handler on _raw_spin_lock_irqsave return.
The kretprobe_trampoline handler is then executed with already
locked kretprobe_table_locks, and first thing it does is to
lock kretprobe_table_locks ;-) the whole lockup path like:
kprobe_flush_task
kretprobe_table_lock
raw_spin_lock_irqsave
_raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed
---> kretprobe_table_locks locked
kretprobe_trampoline
trampoline_handler
kretprobe_hash_lock(current, &head, &flags); <--- deadlock
Adding kprobe_busy_begin/end helpers that mark code with fake
probe installed to prevent triggering of another kprobe within
this code.
Using these helpers in kprobe_flush_task, so the probe recursion
protection check is hit and the probe is never set to prevent
above lockup.
Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2
Fixes: ef53d9c5e4 ("kprobes: improve kretprobe scalability with hashed locking")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "Gustavo A . R . Silva" <gustavoars@kernel.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Reported-by: "Ziqian SUN (Zamir)" <zsun@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix to remove redundant arch_disarm_kprobe() call in
force_unoptimize_kprobe(). This arch_disarm_kprobe()
will be invoked if the kprobe is optimized but disabled,
but that means the kprobe (optprobe) is unused (and
unoptimized) state.
In that case, unoptimize_kprobe() puts it in freeing_list
and kprobe_optimizer (do_unoptimize_kprobes()) automatically
disarm it. Thus this arch_disarm_kprobe() is redundant.
Link: http://lkml.kernel.org/r/158927058719.27680.17183632908465341189.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In kprobe_optimizer() kick_kprobe_optimizer() is called
without kprobe_mutex, but this can race with other caller
which is protected by kprobe_mutex.
To fix that, expand kprobe_mutex protected area to protect
kick_kprobe_optimizer() call.
Link: http://lkml.kernel.org/r/158927057586.27680.5036330063955940456.stgit@devnote2
Fixes: cd7ebe2298 ("kprobes: Use text_poke_smp_batch for optimizing")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "Gustavo A . R . Silva" <gustavoars@kernel.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ziqian SUN <zsun@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Current kprobes uses RCU traversal APIs on kprobe_tables
even if it is safe because kprobe_mutex is locked.
Make those traversals to non-RCU APIs where the kprobe_mutex
is locked.
Link: http://lkml.kernel.org/r/158927056452.27680.9710575332163005121.stgit@devnote2
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Anders reported that the lockdep warns that suspicious
RCU list usage in register_kprobe() (detected by
CONFIG_PROVE_RCU_LIST.) This is because get_kprobe()
access kprobe_table[] by hlist_for_each_entry_rcu()
without rcu_read_lock.
If we call get_kprobe() from the breakpoint handler context,
it is run with preempt disabled, so this is not a problem.
But in other cases, instead of rcu_read_lock(), we locks
kprobe_mutex so that the kprobe_table[] is not updated.
So, current code is safe, but still not good from the view
point of RCU.
Joel suggested that we can silent that warning by passing
lockdep_is_held() to the last argument of
hlist_for_each_entry_rcu().
Add lockdep_is_held(&kprobe_mutex) at the end of the
hlist_for_each_entry_rcu() to suppress the warning.
Link: http://lkml.kernel.org/r/158927055350.27680.10261450713467997503.stgit@devnote2
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When cc-option and friends evaluate compiler flags, the temporary file
$$TMP is created as an output object, and automatically cleaned up.
The actual file path of $$TMP is .<pid>.tmp, here <pid> is the process
ID of $(shell ...) invoked from cc-option. (Please note $$$$ is the
escape sequence of $$).
Such garbage files are cleaned up in most cases, but some compiler flags
create additional output files.
For example, -gsplit-dwarf creates a .dwo file.
When CONFIG_DEBUG_INFO_SPLIT=y, you will see a bunch of .<pid>.dwo files
left in the top of build directories. You may not notice them unless you
do 'ls -a', but the garbage files will increase every time you run 'make'.
This commit changes the temporary object path to .tmp_<pid>/tmp, and
removes .tmp_<pid> directory when exiting. Separate build artifacts such
as *.dwo will be cleaned up all together because their file paths are
usually determined based on the base name of the object.
Another example is -ftest-coverage, which outputs the coverage data into
<base-name-of-object>.gcno
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull networking fixes from David Miller:
1) Don't get per-cpu pointer with preemption enabled in nft_set_pipapo,
fix from Stefano Brivio.
2) Fix memory leak in ctnetlink, from Pablo Neira Ayuso.
3) Multiple definitions of MPTCP_PM_MAX_ADDR, from Geliang Tang.
4) Accidently disabling NAPI in non-error paths of macb_open(), from
Charles Keepax.
5) Fix races between alx_stop and alx_remove, from Zekun Shen.
6) We forget to re-enable SRIOV during resume in bnxt_en driver, from
Michael Chan.
7) Fix memory leak in ipv6_mc_destroy_dev(), from Wang Hai.
8) rxtx stats use wrong index in mvpp2 driver, from Sven Auhagen.
9) Fix memory leak in mptcp_subflow_create_socket error path, from Wei
Yongjun.
10) We should not adjust the TCP window advertised when sending dup acks
in non-SACK mode, because it won't be counted as a dup by the sender
if the window size changes. From Eric Dumazet.
11) Destroy the right number of queues during remove in mvpp2 driver,
from Sven Auhagen.
12) Various WOL and PM fixes to e1000 driver, from Chen Yu, Vaibhav
Gupta, and Arnd Bergmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
e1000e: fix unused-function warning
e1000: use generic power management
e1000e: Do not wake up the system via WOL if device wakeup is disabled
lan743x: add MODULE_DEVICE_TABLE for module loading alias
mlxsw: spectrum: Adjust headroom buffers for 8x ports
bareudp: Fixed configuration to avoid having garbage values
mvpp2: remove module bugfix
tcp: grow window for OOO packets only for SACK flows
mptcp: fix memory leak in mptcp_subflow_create_socket()
netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline
net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline
net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles
mvpp2: ethtool rxtx stats fix
MAINTAINERS: switch to my private email for Renesas Ethernet drivers
rocker: fix incorrect error handling in dma_rings_init
test_objagg: Fix potential memory leak in error handling
net: ethernet: mtk-star-emac: simplify interrupt handling
mld: fix memory leak in ipv6_mc_destroy_dev()
bnxt_en: Return from timer if interface is not in open state.
bnxt_en: Fix AER reset logic on 57500 chips.
...
-----BEGIN PGP SIGNATURE-----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=bYOZ
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"I've managed to get xfstests kind of working with afs. Here are a set
of patches that fix most of the bugs found.
There are a number of primary issues:
- Incorrect handling of mtime and non-handling of ctime. It might be
argued, that the latter isn't a bug since the AFS protocol doesn't
support ctime, but I should probably still update it locally.
- Shared-write mmap, truncate and writeback bugs. This includes not
changing i_size under the callback lock, overwriting local i_size
with the reply from the server after a partial writeback, not
limiting the writeback from an mmapped page to EOF.
- Checks for an abort code indicating that the primary vnode in an
operation was deleted by a third-party are done in the wrong place.
- Silly rename bugs. This includes an incomplete conversion to the
new operation handling, duplicate nlink handling, nlink changing
not being done inside the callback lock and insufficient handling
of third-party conflicting directory changes.
And some secondary ones:
- The UAEOVERFLOW abort code should map to EOVERFLOW not EREMOTEIO.
- Remove a couple of unused or incompletely used bits.
- Remove a couple of redundant success checks.
These seem to fix all the data-corruption bugs found by
./check -afs -g quick
along with the obvious silly rename bugs and time bugs.
There are still some test failures, but they seem to fall into two
classes: firstly, the authentication/security model is different to
the standard UNIX model and permission is arbitrated by the server and
cached locally; and secondly, there are a number of features that AFS
does not support (such as mknod). But in these cases, the tests
themselves need to be adapted or skipped.
Using the in-kernel afs client with xfstests also found a bug in the
AuriStor AFS server that has been fixed for a future release"
* tag 'afs-fixes-20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix silly rename
afs: afs_vnode_commit_status() doesn't need to check the RPC error
afs: Fix use of afs_check_for_remote_deletion()
afs: Remove afs_operation::abort_code
afs: Fix yfs_fs_fetch_status() to honour vnode selector
afs: Remove yfs_fs_fetch_file_status() as it's not used
afs: Fix the mapping of the UAEOVERFLOW abort code
afs: Fix truncation issues and mmap writeback size
afs: Concoct ctimes
afs: Fix EOF corruption
afs: afs_write_end() should change i_size under the right lock
afs: Fix non-setting of mtime when writing into mmap
Clang static analysis reports this double free error
security/selinux/ss/conditional.c:139:2: warning: Attempt to free released memory [unix.Malloc]
kfree(node->expr.nodes);
^~~~~~~~~~~~~~~~~~~~~~~
When cond_read_node fails, it calls cond_node_destroy which frees the
node but does not poison the entry in the node list. So when it
returns to its caller cond_read_list, cond_read_list deletes the
partial list. The latest entry in the list will be deleted twice.
So instead of freeing the node in cond_read_node, let list freeing in
code_read_list handle the freeing the problem node along with all of the
earlier nodes.
Because cond_read_node no longer does any error handling, the goto's
the error case are redundant. Instead just return the error code.
Cc: stable@vger.kernel.org
Fixes: 60abd3181d ("selinux: convert cond_list to array")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Hi Linus,
Please, pull the following patches that replace zero-length arrays with
flexible-array members.
Notice that all of these patches have been baking in linux-next for
two development cycles now.
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
C99 introduced “flexible array members”, which lacks a numeric size for the
array declaration entirely:
struct something {
size_t count;
struct foo items[];
};
This is the way the kernel expects dynamically sized trailing elements to be
declared. It allows the compiler to generate errors when the flexible array
does not occur last in the structure, which helps to prevent some kind of
undefined behavior[3] bugs from being inadvertently introduced to the codebase.
It also allows the compiler to correctly analyze array sizes (via sizeof(),
CONFIG_FORTIFY_SOURCE, and CONFIG_UBSAN_BOUNDS). For instance, there is no
mechanism that warns us that the following application of the sizeof() operator
to a zero-length array always results in zero:
struct something {
size_t count;
struct foo items[0];
};
struct something *instance;
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
size = sizeof(instance->items) * instance->count;
memcpy(instance->items, source, size);
At the last line of code above, size turns out to be zero, when one might have
thought it represents the total size in bytes of the dynamic memory recently
allocated for the trailing array items. Here are a couple examples of this
issue[4][5]. Instead, flexible array members have incomplete type, and so the
sizeof() operator may not be applied[6], so any misuse of such operators will
be immediately noticed at build time.
The cleanest and least error-prone way to implement this is through the use of
a flexible array member:
struct something {
size_t count;
struct foo items[];
};
struct something *instance;
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
size = sizeof(instance->items[0]) * instance->count;
memcpy(instance->items, source, size);
Thanks
--
Gustavo
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
[3] https://git.kernel.org/linus/76497732932f15e7323dc805e8ea8dc11bb587cf
[4] https://git.kernel.org/linus/f2cd32a443da694ac4e28fbf4ac6f9d5cc63a539
[5] https://git.kernel.org/linus/ab91c2a89f86be2898cee208d492816ec238b2cf
[6] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
-----BEGIN PGP SIGNATURE-----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=8HUQ
-----END PGP SIGNATURE-----
Merge tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array member conversions from Gustavo A. R. Silva:
"Replace zero-length arrays with flexible-array members.
Notice that all of these patches have been baking in linux-next for
two development cycles now.
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should no
longer be used[2].
C99 introduced “flexible array members”, which lacks a numeric size
for the array declaration entirely:
struct something {
size_t count;
struct foo items[];
};
This is the way the kernel expects dynamically sized trailing elements
to be declared. It allows the compiler to generate errors when the
flexible array does not occur last in the structure, which helps to
prevent some kind of undefined behavior[3] bugs from being
inadvertently introduced to the codebase.
It also allows the compiler to correctly analyze array sizes (via
sizeof(), CONFIG_FORTIFY_SOURCE, and CONFIG_UBSAN_BOUNDS). For
instance, there is no mechanism that warns us that the following
application of the sizeof() operator to a zero-length array always
results in zero:
struct something {
size_t count;
struct foo items[0];
};
struct something *instance;
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
size = sizeof(instance->items) * instance->count;
memcpy(instance->items, source, size);
At the last line of code above, size turns out to be zero, when one
might have thought it represents the total size in bytes of the
dynamic memory recently allocated for the trailing array items. Here
are a couple examples of this issue[4][5].
Instead, flexible array members have incomplete type, and so the
sizeof() operator may not be applied[6], so any misuse of such
operators will be immediately noticed at build time.
The cleanest and least error-prone way to implement this is through
the use of a flexible array member:
struct something {
size_t count;
struct foo items[];
};
struct something *instance;
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
size = sizeof(instance->items[0]) * instance->count;
memcpy(instance->items, source, size);
instead"
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
[4] commit f2cd32a443 ("rndis_wlan: Remove logically dead code")
[5] commit ab91c2a89f ("tpm: eventlog: Replace zero-length array with flexible-array member")
[6] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
* tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (41 commits)
w1: Replace zero-length array with flexible-array
tracing/probe: Replace zero-length array with flexible-array
soc: ti: Replace zero-length array with flexible-array
tifm: Replace zero-length array with flexible-array
dmaengine: tegra-apb: Replace zero-length array with flexible-array
stm class: Replace zero-length array with flexible-array
Squashfs: Replace zero-length array with flexible-array
ASoC: SOF: Replace zero-length array with flexible-array
ima: Replace zero-length array with flexible-array
sctp: Replace zero-length array with flexible-array
phy: samsung: Replace zero-length array with flexible-array
RxRPC: Replace zero-length array with flexible-array
rapidio: Replace zero-length array with flexible-array
media: pwc: Replace zero-length array with flexible-array
firmware: pcdp: Replace zero-length array with flexible-array
oprofile: Replace zero-length array with flexible-array
block: Replace zero-length array with flexible-array
tools/testing/nvdimm: Replace zero-length array with flexible-array
libata: Replace zero-length array with flexible-array
kprobes: Replace zero-length array with flexible-array
...
The purgatory Makefile removes -fstack-protector options if they were
configured in, but does not currently add -fno-stack-protector.
If gcc was configured with the --enable-default-ssp configure option,
this results in the stack protector still being enabled for the
purgatory (absent distro-specific specs files that might disable it
again for freestanding compilations), if the main kernel is being
compiled with stack protection enabled (if it's disabled for the main
kernel, the top-level Makefile will add -fno-stack-protector).
This will break the build since commit
e4160b2e4b ("x86/purgatory: Fail the build if purgatory.ro has missing symbols")
and prior to that would have caused runtime failure when trying to use
kexec.
Explicitly add -fno-stack-protector to avoid this, as done in other
Makefiles that need to disable the stack protector.
Reported-by: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2020-06-16
This series contains fixes to e1000 and e1000e.
Chen fixes an e1000e issue where systems could be waken via WoL, even
though the user has disabled the wakeup bit via sysfs.
Vaibhav Gupta updates the e1000 driver to clean up the legacy Power
Management hooks.
Arnd Bergmann cleans up the inconsistent use CONFIG_PM_SLEEP
preprocessor tags, which also resolves the compiler warnings about the
possibility of unused structure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The CONFIG_PM_SLEEP #ifdef checks in this file are inconsistent,
leading to a warning about sometimes unused function:
drivers/net/ethernet/intel/e1000e/netdev.c:137:13: error: unused function 'e1000e_check_me' [-Werror,-Wunused-function]
Rather than adding more #ifdefs, just remove them completely
and mark the PM functions as __maybe_unused to let the compiler
work it out on it own.
Fixes: e086ba2fcc ("e1000e: disable s0ix entry and exit flows for ME systems")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
With legacy PM hooks, it was the responsibility of a driver to manage PCI
states and also the device's power state. The generic approach is to let PCI
core handle the work.
e1000_suspend() calls __e1000_shutdown() to perform intermediate tasks.
__e1000_shutdown() modifies the value of "wake" (device should be wakeup
enabled or not), responsible for controlling the flow of legacy PM.
Since, PCI core has no idea about the value of "wake", new code for generic
PM may produce unexpected results. Thus, use "device_set_wakeup_enable()"
to wakeup-enable the device accordingly.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently the system will be woken up via WOL(Wake On LAN) even if the
device wakeup ability has been disabled via sysfs:
cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup
disabled
The system should not be woken up if the user has explicitly
disabled the wake up ability for this device.
This patch clears the WOL ability of this network device if the
user has disabled the wake up ability in sysfs.
Fixes: bc7f75fa97 ("[E1000E]: New pci-express e1000 driver")
Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Without a MODULE_DEVICE_TABLE the attributes are missing that create
an alias for auto-loading the module in userspace via hotplug.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix AFS's silly rename by the following means:
(1) Set the destination directory in afs_do_silly_rename() so as to avoid
misbehaviour and indicate that the directory data version will
increment by 1 so as to avoid warnings about unexpected changes in the
DV. Also indicate that the ctime should be updated to avoid xfstest
grumbling.
(2) Note when the server indicates that a directory changed more than we
expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a
third party change, checking on successful completion of unlink and
rename.
The problem is that the FS.RemoveFile RPC op doesn't report the status
of the unlinked file, though YFS.RemoveFile2 does. This can be
mitigated by the assumption that if the directory DV cranked by
exactly 1, we can be sure we removed one link from the file; further,
ordinarily in AFS, files cannot be hardlinked across directories, so
if we reduce nlink to 0, the file is deleted.
However, if the directory DV jumps by more than 1, we cannot know if a
third party intervened by adding or removing a link on the file we
just removed a link from.
The same also goes for any vnode that is at the destination of the
FS.Rename RPC op.
(3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock
section along with the other attribute updates if ->op_unlinked is set
on the descriptor for the appropriate vnode.
(4) Issue a follow up status fetch to the unlinked file in the event of a
third party conflict that makes it impossible for us to know if we
actually deleted the file or not.
(5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to
the user about the nlink of a silly deleted file so that it appears as
0, not 1.
Found with the generic/035 and generic/084 xfstests.
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
The port's headroom buffers are used to store packets while they
traverse the device's pipeline and also to store packets that are egress
mirrored.
On Spectrum-3, ports with eight lanes use two headroom buffers between
which the configured headroom size is split.
In order to prevent packet loss, multiply the calculated headroom size
by two for 8x ports.
Fixes: da382875c6 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Code to initialize the conf structure while gathering the configuration
of the device was missing.
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Martin <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The remove function does not destroy all
BM Pools when per cpu pool is active.
When reloading the mvpp2 as a module the BM Pools
are still active in hardware and due to the bug
have twice the size now old + new.
This eventually leads to a kernel crash.
v2:
* add Fixes tag
Fixes: 7d04b0b13b ("mvpp2: percpu buffers")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Back in 2013, we made a change that broke fast retransmit
for non SACK flows.
Indeed, for these flows, a sender needs to receive three duplicate
ACK before starting fast retransmit. Sending ACK with different
receive window do not count.
Even if enabling SACK is strongly recommended these days,
there still are some cases where it has to be disabled.
Not increasing the window seems better than having to
rely on RTO.
After the fix, following packetdrill test gives :
// Initialize connection
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+0 < S 0:0(0) win 32792 <mss 1000,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,wscale 8>
+0 < . 1:1(0) ack 1 win 514
+0 accept(3, ..., ...) = 4
+0 < . 1:1001(1000) ack 1 win 514
// Quick ack
+0 > . 1:1(0) ack 1001 win 264
+0 < . 2001:3001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 3001:4001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 4001:5001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 1001:2001(1000) ack 1 win 514
// Hole is repaired.
+0 > . 1:1(0) ack 5001 win 272
Fixes: 4e4f1fc226 ("tcp: properly increase rcv_ssthresh for ofo packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I squashed the 'allnoconfig' compiler warning about the
set_sve_default_vl() function being defined but not used in commit
1e570f512c ("arm64/sve: Eliminate data races on sve_default_vl"), I
accidentally broke the build for configs where ARM64_SVE is enabled, but
SYSCTL is not.
Fix this by only compiling the SVE sysctl support if both CONFIG_SVE=y
and CONFIG_SYSCTL=y.
Cc: Dave Martin <Dave.Martin@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200616131808.GA1040@lca.pw
Signed-off-by: Will Deacon <will@kernel.org>
Add ":README" suffix support for the requires list, so that
the testcase can list up the required string for README file
to the requires list.
Note that the required string is treated as a fixed string,
instead of regular expression. Also, the testcase can specify
a string containing spaces with quotes. E.g.
# requires: "place: [<module>:]<symbol>":README
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add ":tracer" suffix support for the requires list, so that
the testcase can list up the required tracer (e.g. function)
to the requires list.
For example, if the testcase requires function_graph tracer,
it can write requires list as below instead of checking
available_tracers.
# requires: function_graph:tracer
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since check_filter_file() is basically checking the filter
tracefs file, we can convert it into requires list.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit cca98e9f8b ("mm: enforce that vmap can't map pages executable")
introduced 'pgprot_nx(prot)' for arm64 but collided silently with the
BTI support during the merge window, which endeavours to clear the GP
bit for non-executable kernel mappings in set_memory_nx().
For consistency between the two APIs, clear the GP bit in pgprot_nx().
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200615154642.3579-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
afs_vnode_commit_status() is only ever called if op->error is 0, so remove
the op->error checks from the function.
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
afs_check_for_remote_deletion() checks to see if error ENOENT is returned
by the server in response to an operation and, if so, marks the primary
vnode as having been deleted as the FID is no longer valid.
However, it's being called from the operation success functions, where no
abort has happened - and if an inline abort is recorded, it's handled by
afs_vnode_commit_status().
Fix this by actually calling the operation aborted method if provided and
having that point to afs_check_for_remote_deletion().
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix yfs_fs_fetch_status() to honour the vnode selector in
op->fetch_status.which as does afs_fs_fetch_status() that allows
afs_do_lookup() to use this as an alternative to the InlineBulkStatus RPC
call if not implemented by the server.
This doesn't matter in the current code as YFS servers always implement
InlineBulkStatus, but a subsequent will call it on YFS servers too in some
circumstances.
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Introduce "requires:" list to check required ftrace interface
for each test. This will simplify the interface checking code
and unify the error message. Another good point is, it can
skip the ftrace initializing.
Note that this requires list must be written as a shell
comment.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As same as other test cases, return unsupported if kprobe_events
or argument access feature are not found.
There can be a new arch which does not port those features yet,
and an older kernel which doesn't support it.
Those can not enable the features.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Allow ":" in the description line. Currently if there is ":"
in the test description line, the description is cut at that
point, but that was unintended.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently target_copy() is used only for sending linger pings, so
this doesn't come up, but generally omitting used_replica can hang
the client as we wouldn't notice the acting set change (legacy_change
in calc_target()) or trigger a warning in handle_reply().
Fixes: 117d96a04f ("libceph: support for balanced and localized reads")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Currently target_copy() is used only for sending linger pings, so
this doesn't come up, but generally omitting recovery_deletes can
result in unneeded resends (force_resend in calc_target()).
Fixes: ae78dd8139 ("libceph: make RECOVERY_DELETES feature create a new interval")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
osd_req_flags is overly general and doesn't suit its only user
(read_from_replica option) well:
- applying osd_req_flags in account_request() affects all OSD
requests, including linger (i.e. watch and notify). However,
linger requests should always go to the primary even though
some of them are reads (e.g. notify has side effects but it
is a read because it doesn't result in mutation on the OSDs).
- calls to class methods that are reads are allowed to go to
the replica, but most such calls issued for "rbd map" and/or
exclusive lock transitions are requested to be resent to the
primary via EAGAIN, doubling the latency.
Get rid of global osd_req_flags and set read_from_replica flag
only on specific OSD requests instead.
Fixes: 8ad44d5e0d ("libceph: read_from_replica option")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Qian Cai reported:
"""
When NUMA=n and nr_node_ids=2, in apply_wqattrs_prepare(), it has,
for_each_node(node) {
if (wq_calc_node_cpumask(...
where it will trigger a booting warning,
WARNING: workqueue cpumask: online intersect > possible intersect
because it found 2 nodes and wq_numa_possible_cpumask[1] is an empty
cpumask.
"""
Let NODES_SHIFT depend on NEED_MULTIPLE_NODES like it is done
on other architectures in order to fix this.
Fixes: 701dc81e74 ("s390/mm: remove fake numa support")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
clock_getres in the vDSO library has to preserve the same behaviour
of posix_get_hrtimer_res().
In particular, posix_get_hrtimer_res() does:
sec = 0;
ns = hrtimer_resolution;
and hrtimer_resolution depends on the enablement of the high
resolution timers that can happen either at compile or at run time.
Fix the s390 vdso implementation of clock_getres keeping a copy of
hrtimer_resolution in vdso data and using that directly.
Link: https://lkml.kernel.org/r/20200324121027.21665-1-vincenzo.frascino@arm.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[heiko.carstens@de.ibm.com: use llgf for proper zero extension]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently, the VDSO is being linked through $(CC). This does not match
how the rest of the kernel links objects, which is through the $(LD)
variable.
When clang is built in a default configuration, it first attempts to use
the target triple's default linker, which is just ld. However, the user
can override this through the CLANG_DEFAULT_LINKER cmake define so that
clang uses another linker by default, such as LLVM's own linker, ld.lld.
This can be useful to get more optimized links across various different
projects.
However, this is problematic for the s390 vDSO because ld.lld does not
have any s390 emulatiom support:
https://github.com/llvm/llvm-project/blob/llvmorg-10.0.1-rc1/lld/ELF/Driver.cpp#L132-L150
Thus, if a user is using a toolchain with ld.lld as the default, they
will see an error, even if they have specified ld.bfd through the LD
make variable:
$ make -j"$(nproc)" -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- LLVM=1 \
LD=s390x-linux-gnu-ld \
defconfig arch/s390/kernel/vdso64/
ld.lld: error: unknown emulation: elf64_s390
clang-11: error: linker command failed with exit code 1 (use -v to see invocation)
Normally, '-fuse-ld=bfd' could be used to get around this; however, this
can be fragile, depending on paths and variable naming. The cleaner
solution for the kernel is to take advantage of the fact that $(LD) can
be invoked directly, which bypasses the heuristics of $(CC) and respects
the user's choice. Similar changes have been done for ARM, ARM64, and
MIPS.
Link: https://lkml.kernel.org/r/20200602192523.32758-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1041
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
[heiko.carstens@de.ibm.com: add --build-id flag]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
snprintf() returns the number of bytes that would be written,
which may be greater than the the actual length to be written.
uv_query_facilities() should return the number of bytes printed
into the buffer. This is the return value of scnprintf().
The other functions are the same.
Link: https://lkml.kernel.org/r/20200509085608.41061-4-chenzhou10@huawei.com
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
snprintf() returns the number of bytes that would be written,
which may be greater than the the actual length to be written.
show() methods should return the number of bytes printed into the
buffer. This is the return value of scnprintf().
Link: https://lkml.kernel.org/r/20200509085608.41061-3-chenzhou10@huawei.com
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
snprintf() returns the number of bytes that would be written,
which may be greater than the the actual length to be written.
show() methods should return the number of bytes printed into the
buffer. This is the return value of scnprintf().
Link: https://lkml.kernel.org/r/20200509085608.41061-2-chenzhou10@huawei.com
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
