In fib_nl2rule(), 'err' variable has been set to -EINVAL during
declaration, and no need to set the 'err' variable to -EINVAL again.
So, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using two bools derived from a flags passed as arguments to
the parent function of tc_action_load_ops, just pass the flags itself
to tc_action_load_ops to simplify its parameters.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Note that the upper bound of ida_alloc_range() is inclusive while the one
of ida_simple_get() was exclusive.
So NFP_FL_LAG_GROUP_MAX has been decreased by 1. It now better watch the
comment stating that "1 to 31 are valid".
The only other user of NFP_FL_LAG_GROUP_MAX has been updated accordingly in
nfp_fl_lag_put_unprocessed().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
RXFH input_xfrm currently has three supported values: 0 (clear all),
symmetric_xor and NO_CHANGE.
Reject any other value sent from user-space.
Fixes: 13e59344fb ("net: ethtool: add support for symmetric-xor RSS hash")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20240104212653.394424-1-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The expression "source ../lib.sh" added to net/forwarding/lib.sh in commit
25ae948b44 ("selftests/net: add lib.sh") does not work for tests outside
net/forwarding which source net/forwarding/lib.sh (1). It also does not
work in some cases where only a subset of tests are exported (2).
Avoid the problems mentioned above by replacing the faulty expression with
a copy of the content from net/lib.sh which is used by files under
net/forwarding.
A more thorough solution which avoids duplicating content between
net/lib.sh and net/forwarding/lib.sh has been posted here:
https://lore.kernel.org/netdev/20231222135836.992841-1-bpoirier@nvidia.com/
The approach in the current patch is a stopgap solution to avoid submitting
large changes at the eleventh hour of this development cycle.
Example of problem 1)
tools/testing/selftests/drivers/net/bonding$ ./dev_addr_lists.sh
./net_forwarding_lib.sh: line 41: ../lib.sh: No such file or directory
TEST: bonding cleanup mode active-backup [ OK ]
TEST: bonding cleanup mode 802.3ad [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond down) [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond up) [ OK ]
An error message is printed but since the test does not use functions from
net/lib.sh, the test results are not affected.
Example of problem 2)
tools/testing/selftests$ make install TARGETS="net/forwarding"
tools/testing/selftests$ cd kselftest_install/net/forwarding/
tools/testing/selftests/kselftest_install/net/forwarding$ ./pedit_ip.sh veth{0..3}
lib.sh: line 41: ../lib.sh: No such file or directory
TEST: ping [ OK ]
TEST: ping6 [ OK ]
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
In this case, the test results are affected.
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Suggested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240104141109.100672-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZZgrfgAKCRDbK58LschI
g87JAQDu+oUG3aWnRJi+lJTK8vGnKRuBwUxgnI5Ze99N0tuPmAEAz1gpXLYP+fKE
eqRhZGGhujdHC9if3Le+nG6nvf8Gvw0=
=KPkZ
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-05
We've added 40 non-merge commits during the last 2 day(s) which contain
a total of 73 files changed, 1526 insertions(+), 951 deletions(-).
The main changes are:
1) Fix a memory leak when streaming AF_UNIX sockets were inserted
into multiple sockmap slots/maps, from John Fastabend.
2) Fix gotol in s390 BPF JIT with large offsets, from Ilya Leoshkevich.
3) Fix reattachment branch in bpf_tracing_prog_attach() and reject
the request if there is no valid attach_btf, from Jiri Olsa.
4) Remove deprecated bpfilter kernel leftovers given the project
is developed in user space (https://github.com/facebook/bpfilter),
from Quentin Deslandes.
5) Relax tracing BPF program recursive attach rules given right now
it is not possible to create tracing program call cycles,
from Dmitrii Dolgov.
6) Fix excessive memory consumption for the bpf_global_percpu_ma
for systems with a large number of CPUs, from Yonghong Song.
7) Small x86 BPF JIT cleanup to reuse emit_nops instead of open-coding
memcpy of x86_nops, from Leon Hwang.
8) Follow-up for libbpf to support __arg_ctx global function argument tag
semantics to complement the merged kernel side, from Andrii Nakryiko.
9) Introduce "volatile compare" macros for BPF selftests in order
to make the latter more robust against compiler optimization,
from Alexei Starovoitov.
10) Small simplification in verifier's size checking of helper accesses
along with additional selftests, from Andrei Matei.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (40 commits)
selftests/bpf: Test re-attachment fix for bpf_tracing_prog_attach
bpf: Fix re-attachment branch in bpf_tracing_prog_attach
selftests/bpf: Add test for recursive attachment of tracing progs
bpf: Relax tracing prog recursive attach rules
bpf, x86: Use emit_nops to replace memcpy x86_nops
selftests/bpf: Test gotol with large offsets
selftests/bpf: Double the size of test_loader log
s390/bpf: Fix gotol with large offsets
bpfilter: remove bpfilter
bpf: Remove unnecessary cpu == 0 check in memalloc
selftests/bpf: add __arg_ctx BTF rewrite test
selftests/bpf: add arg:ctx cases to test_global_funcs tests
libbpf: implement __arg_ctx fallback logic
libbpf: move BTF loading step after relocation step
libbpf: move exception callbacks assignment logic into relocation step
libbpf: use stable map placeholder FDs
libbpf: don't rely on map->fd as an indicator of map being created
libbpf: use explicit map reuse flag to skip map creation steps
libbpf: make uniform use of btf__fd() accessor inside libbpf
selftests/bpf: Add a selftest with > 512-byte percpu allocation size
...
====================
Link: https://lore.kernel.org/r/20240105170105.21070-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fb.com domain is going to be deprecated.
Use personal one for kernel contributions.
Signed-off-by: Vadim Fedorenko <vadfed@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240104172540.2379128-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently there is no test which checks that IPv6 extension header packets
successfully coalesce. This commit adds a test, which verifies two IPv6
packets with HBH extension headers do coalesce, and another test which
checks that packets with different extension header data do not coalesce
in GRO.
I changed the receive socket filter to accept a packet with one extension
header. This change exposed a bug in the fragment test -- the old BPF did
not accept the fragment packet. I updated correct_num_packets in the
fragment test accordingly.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/69282fed-2415-47e8-b3d3-34939ec3eb56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing code always pulls the IPv6 header and sets the transport
offset initially. Then optionally again pulls any extension headers in
ipv6_gso_pull_exthdrs and sets the transport offset again on return from
that call. skb->data is set at the start of the first extension header
before calling ipv6_gso_pull_exthdrs, and must disable the frag0
optimization because that function uses pskb_may_pull/pskb_pull instead of
skb_gro_ helpers. It sets the GRO offset to the TCP header with
skb_gro_pull and sets the transport header. Then returns skb->data to its
position before this block.
This commit introduces a new helper function - ipv6_gro_pull_exthdrs -
which is used in ipv6_gro_receive to pull ipv6 ext headers instead of
ipv6_gso_pull_exthdrs. Thus, there is no modification of skb->data, all
operations use skb_gro_* helpers, and the frag0 fast path can be taken for
IPv6 packets with ext headers.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/504130f6-b56c-4dcc-882c-97942c59f5b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds net_offload to IPv6 Hop-by-Hop extension headers (as it
is done for routing and dstopts) since it is supported in GSO and GRO.
This allows to remove specific HBH conditionals in GSO and GRO when
pulling and parsing an incoming packet.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/d4f8825a-1d55-4b12-9d67-a254dbbfa6ae@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add description to net/packet/af_packet.c
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240104144119.1319055-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to all the DSA tag modules.
The descriptions are copy/pasted Kconfig names, with s/^Tag/DSA tag/.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240104143759.1318137-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko says:
====================
dpll: expose fractional frequency offset value to user
Allow to expose pin fractional frequency offset value over new DPLL
generic netlink attribute. Add an op to get the value from the driver.
Implement this new op in mlx5 driver.
====================
Link: https://lore.kernel.org/r/20240103132838.1501801-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new netlink attribute to expose fractional frequency offset value
for a pin. Add an op to get the value from the driver.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240103132838.1501801-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
ds->user_mii_bus cleanup (part 1)
There are some drivers which assign ds->user_mii_bus when they
don't really need its specific functionality, aka non-OF based
dsa_user_phy_connect(). There was some confusion regarding the
fact that yes, this is why ds->user_mii_bus really exists, so
I've started a cleanup series which aims to eliminate the usage
of ds->user_mii_bus from drivers when there is nothing to gain
from it.
Today's drivers are lantiq_gswip, qca8k and bcm_sf2. The work is
not done here, but a "part 2" may or may not come, depending on
other priorities.
All patches were only compile-tested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There used to be a of_node_put(priv->master_mii_dn) call in
bcm_sf2_mdio_unregister(), which was accidentally deleted in commit
6ca80638b9 ("net: dsa: Use conduit and user terms").
But it's not needed - we don't need to hold a reference on the
"brcm,unimac-mdio" OF node for that long, since we don't do anything
with it. We can release it as soon as we finish bcm_sf2_mdio_register().
Also reduce "if (err && dn)" to just "if (err)". We know "dn", aka the
former priv->master_mii_dn, is non-NULL. Otherwise, of_mdio_find_bus(dn)
would not have been able to find the bus behind "brcm,unimac-mdio".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bcm_sf2 driver does something strange. Instead of calling
of_mdiobus_register() with an OF node argument, it manually assigns the
bus->dev->of_node and then calls the non-OF mdiobus_register(). This
circumvents some code from __of_mdiobus_register() from running, which
sets the auto-scan mask, parses some device tree properties, etc.
I'm going to go out on a limb and say that the OF node isn't, in fact,
needed at all, and can be removed. The MDIO diversion as initially
implemented in commit 461cd1b03e ("net: dsa: bcm_sf2: Register our
slave MDIO bus") looked quite different than it is now, after commit
771089c2a4 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used").
Initially, it made sense, as bcm_sf2 was registering another set of
driver ops for the "brcm,unimac-mdio" OF node. But now, it deletes all
phandles, which makes "phy-handle"s unable to find PHYs, which means
that it always goes through the OF-unaware dsa_user_phy_connect().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Accessed either through priv->dev or ds->dev, it is the same device
structure. Keep a single variable which holds a reference to it, and use
it consistently.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__of_mdiobus_register() already calls __mdiobus_register() if the
OF node provided as argument is NULL. We can take advantage of that
and simplify the 2 code path, calling devm_of_mdiobus_register() only
once for both cases.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To simplify reasoning about why the DSA framework provides the
ds->user_mii_bus functionality, drivers should only use it if they
need to. The qca8k driver appears to also use it simply as storage
for a pointer, which is not a good enough reason to make the core
much more difficult to follow.
ds->user_mii_bus is useful for only 2 cases:
1. The driver probes on platform_data (no OF)
2. The driver probes on OF, but there is no OF node for the MDIO bus.
It is unclear if case (1) is supported with qca8k. It might not be:
the driver might crash when of_device_get_match_data() returns NULL
and then it dereferences priv->info without NULL checking.
Anyway, let us limit the ds->user_mii_bus usage only to the above cases,
and not assign it when an OF node is present.
The bus->phy_mask assignment follows along with the movement, because
__of_mdiobus_register() overwrites this bus field anyway. The value set
by the driver only matters for the non-OF code path.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the driver calls the non-OF devm_mdiobus_register() rather
than devm_of_mdiobus_register() for this case, but it seems to rather
be a confusing coincidence, and not a real use case that needs to be
supported.
If the device tree says status = "disabled" for the MDIO bus, we
shouldn't need an MDIO bus at all. Instead, just exit as early as
possible and do not call any MDIO API.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_get_child_by_name() gives us an OF node with an elevated refcount,
which should be dropped when we're done with it. This is so that,
if (of_node_check_flag(node, OF_DYNAMIC)) is true, the node's memory can
eventually be freed.
There are 2 distinct paths to be considered in qca8k_mdio_register():
- devm_of_mdiobus_register() succeeds: since commit 3b73a7b8ec ("net:
mdio_bus: add refcounting for fwnodes to mdiobus"), the MDIO core
treats this well.
- devm_of_mdiobus_register() or anything up to that point fails: it is
the duty of the qca8k driver to release the OF node.
This change addresses the second case by making sure that the OF node
reference is not leaked.
The "mdio" node may be NULL, but of_node_put(NULL) is safe.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the "lantiq,xrx200-mdio" child has status = "disabled", the MDIO bus
creation should be avoided. Use of_device_is_available() to check for
that, and take advantage of 2 facts:
- of_device_is_available(NULL) returns false
- of_node_put(NULL) is a no-op
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver does not need any of the functionalities that make
ds->user_mii_bus special. Those use cases are listed here:
https://lore.kernel.org/netdev/20231221174746.hylsmr3f7g5byrsi@skbuf/
It just makes use of ds->user_mii_bus only as storage for its own MDIO
bus, which otherwise has no connection to the framework. This is because:
- the gswip driver only probes on OF: it fails if of_device_get_match_data()
returns NULL
- when the child OF node of the MDIO bus is absent, no MDIO bus is
registered at all, not even by the DSA framework. In order for that to
have happened, the gswip driver would have needed to provide
->phy_read() and ->phy_write() in struct dsa_switch_ops, which it does
not.
We can break the connection between the gswip driver and the DSA
framework and still preserve the same functionality.
Since commit 3b73a7b8ec ("net: mdio_bus: add refcounting for fwnodes
to mdiobus"), MDIO buses take ownership of the OF node handled to them,
and release it on their own. The gswip driver no longer needs to do
this.
Combine that with devres, and we no longer need to keep track of
anything for teardown purposes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__of_mdiobus_register(), called right next, overwrites the phy_mask
we just configured on the bus, so this is redundant and confusing.
Delete it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitrii Dolgov says:
====================
Relax tracing prog recursive attach rules
Currently, it's not allowed to attach an fentry/fexit prog to another
fentry/fexit. At the same time it's not uncommon to see a tracing
program with lots of logic in use, and the attachment limitation
prevents usage of fentry/fexit for performance analysis (e.g. with
"bpftool prog profile" command) in this case. An example could be
falcosecurity libs project that uses tp_btf tracing programs for
offloading certain part of logic into tail-called programs, but the
use-case is still generic enough -- a tracing program could be
complicated and heavy enough to warrant its profiling, yet frustratingly
it's not possible to do so use best tooling for that.
Following the corresponding discussion [1], the reason for that is to
avoid tracing progs call cycles without introducing more complex
solutions. But currently it seems impossible to load and attach tracing
programs in a way that will form such a cycle. Replace "no same type"
requirement with verification that no more than one level of attachment
nesting is allowed. In this way only one fentry/fexit program could be
attached to another fentry/fexit to cover profiling use case, and still
no cycle could be formed.
The series contains a test for recursive attachment, as well as a fix +
test for an issue in re-attachment branch of bpf_tracing_prog_attach.
When preparing the test for the main change set, I've stumbled upon the
possibility to construct a sequence of events when attach_btf would be
NULL while computing a trampoline key. It doesn't look like this issue
is triggered by the main change, because the reproduces doesn't actually
need to have an fentry attachment chain.
[1]: https://lore.kernel.org/bpf/20191108064039.2041889-16-ast@kernel.org/
====================
Link: https://lore.kernel.org/r/20240103190559.14750-1-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test case to verify the fix for "prog->aux->dst_trampoline and
tgt_prog is NULL" branch in bpf_tracing_prog_attach. The sequence of
events:
1. load rawtp program
2. load fentry program with rawtp as target_fd
3. create tracing link for fentry program with target_fd = 0
4. repeat 3
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-5-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following case can cause a crash due to missing attach_btf:
1) load rawtp program
2) load fentry program with rawtp as target_fd
3) create tracing link for fentry program with target_fd = 0
4) repeat 3
In the end we have:
- prog->aux->dst_trampoline == NULL
- tgt_prog == NULL (because we did not provide target_fd to link_create)
- prog->aux->attach_btf == NULL (the program was loaded with attach_prog_fd=X)
- the program was loaded for tgt_prog but we have no way to find out which one
BUG: kernel NULL pointer dereference, address: 0000000000000058
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x15b/0x430
? fixup_exception+0x22/0x330
? exc_page_fault+0x6f/0x170
? asm_exc_page_fault+0x22/0x30
? bpf_tracing_prog_attach+0x279/0x560
? btf_obj_id+0x5/0x10
bpf_tracing_prog_attach+0x439/0x560
__sys_bpf+0x1cf4/0x2de0
__x64_sys_bpf+0x1c/0x30
do_syscall_64+0x41/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Return -EINVAL in this situation.
Fixes: f3a9507554 ("bpf: Allow trampoline re-attach for tracing and lsm programs")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-4-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verify the fact that only one fentry prog could be attached to another
fentry, building up an attachment chain of limited size. Use existing
bpf_testmod as a start of the chain.
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-3-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, it's not allowed to attach an fentry/fexit prog to another
one fentry/fexit. At the same time it's not uncommon to see a tracing
program with lots of logic in use, and the attachment limitation
prevents usage of fentry/fexit for performance analysis (e.g. with
"bpftool prog profile" command) in this case. An example could be
falcosecurity libs project that uses tp_btf tracing programs.
Following the corresponding discussion [1], the reason for that is to
avoid tracing progs call cycles without introducing more complex
solutions. But currently it seems impossible to load and attach tracing
programs in a way that will form such a cycle. The limitation is coming
from the fact that attach_prog_fd is specified at the prog load (thus
making it impossible to attach to a program loaded after it in this
way), as well as tracing progs not implementing link_detach.
Replace "no same type" requirement with verification that no more than
one level of attachment nesting is allowed. In this way only one
fentry/fexit program could be attached to another fentry/fexit to cover
profiling use case, and still no cycle could be formed. To implement,
add a new field into bpf_prog_aux to track nested attachment for tracing
programs.
[1]: https://lore.kernel.org/bpf/20191108064039.2041889-16-ast@kernel.org/
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-2-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- first kunit tests for both cfg80211 and mac80211
- a few multi-link fixes
- DSCP mapping update
- RCU fix
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmWVcYQACgkQ10qiO8sP
aABEdw//VOD/aR+ZXNwZBcRoJufHYCHu0h3gIKqEcB+W+e7dFs8OYQryHP/jo3AI
brOjcP9Upooyk6h7TNszL/YvjLjRmEFnaz3mEb41xy62M2NGHyPcA5lB9J5gphpY
uurhcj+SfxZeB0/YIVPR4Bwf/RTbDkWzJIWJ/f7mfXk2ELQby1ohzYCezK6p6f/p
vP7w0zk4xFFKZChbyrccBGHl5/Q6oOFOeuwXE4h0J1skBWUCfxjUInGiU7fuQEWb
FhJUzB1WSJPVKPzWuLC4bUvAcrwfv4JHCcjWECQyPr38+wrEj4DZle8XtLN/dEUB
aE/2wKyFcbHmGTqRiBuaPhms439WKbave1yDEdOmuvcgyj2AMNkY6hod9Q5bWZJr
L+MvJ50tTKJcUQNayA7pyGMdLr7lvMxkMsLPgPKGSLBMp/uqW/4SioXO4AqCfL7p
T3Vw9Z1SMFI5WvSSRssIL8Sbl0LS+vMGEN76HZmxs5m4d0f5Hv9RRFFDmNqFyD4G
iqKmYPi1XJc7QsoHtonyx+kByImFdl839RsU7WPh9GS045yNwlC3eWhZMgbuF/ol
1iWNPcXogh9ABh8zgFaeWrLnDj2Kcix6vtec//7YM5cTYklyr0Ruo3bwKR3N00C3
hNh5zVLd/LHoce6B0V5HAq+ajMnnGw6CT6pM7quF5srAJZLIKLM=
=dHxp
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Just a couple of more things over the holidays:
- first kunit tests for both cfg80211 and mac80211
- a few multi-link fixes
- DSCP mapping update
- RCU fix
* tag 'wireless-next-2024-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next:
wifi: mac80211: remove redundant ML element check
wifi: cfg80211: parse all ML elements in an ML probe response
wifi: cfg80211: correct comment about MLD ID
wifi: cfg80211: Update the default DSCP-to-UP mapping
wifi: cfg80211: tests: add some scanning related tests
wifi: mac80211: kunit: extend MFP tests
wifi: mac80211: kunit: generalize public action test
wifi: mac80211: add kunit tests for public action handling
kunit: add a convenience allocation wrapper for SKBs
kunit: add parameter generation macro using description from array
wifi: mac80211: fix spelling typo in comment
wifi: cfg80211: fix RCU dereference in __cfg80211_bss_update
====================
Link: https://lore.kernel.org/r/20240103144423.52269-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When r8169 is built-in but LED support is a loadable module, the new
code to drive the LED causes a link failure:
ld: drivers/net/ethernet/realtek/r8169_leds.o: in function `rtl8168_init_leds':
r8169_leds.c:(.text+0x36c): undefined reference to `devm_led_classdev_register_ext'
LED support is an optional feature, so fix this issue by adding a Kconfig
symbol R8169_LEDS that is guaranteed to be false if r8169 is built-in
and LED core support is a module. As a positive side effect of this change
r8169_leds.o no longer is built under this configuration.
Fixes: 18764b883e ("r8169: add support for LED's on RTL8168/RTL8101")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312281159.9TPeXbNd-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Tested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/d055aeb5-fe5c-4ccf-987f-5af93a17537b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver code proper is handled by the lynx_pcs. The enetc just needs
to populate phylink's supported_interfaces array, and return true for
this phy-mode in enetc_port_has_pcs(), such that it creates an internal
MDIO bus through which the Lynx PCS registers are accessed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240103113445.3892971-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum
required", it caused issues on networks where routers send prefixes
with preferred_lft=0
- wifi:
- iwlwifi: pcie: don't synchronize IRQs from IRQ, prevent deadlock
- mac80211: fix re-adding debugfs entries during reconfiguration
Current release - new code bugs:
- tcp: print AO/MD5 messages only if there are any keys
Previous releases - regressions:
- virtio_net: fix missing dma unmap for resize, prevent OOM
Previous releases - always broken:
- mptcp: prevent tcp diag from closing listener subflows
- nf_tables:
- set transport header offset for egress hook, fix IPv4 mangling
- skip set commit for deleted/destroyed sets, avoid double deactivation
- nat: make sure action is set for all ct states, fix openvswitch
matching on ICMP packets in related state
- eth: mlxbf_gige: fix receive hang under heavy traffic
- eth: r8169: fix PCI error on system resume for RTL8168FP
- net: add missing getsockopt(SO_TIMESTAMPING_NEW) and cmsg handling
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+se8
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
We haven't accumulated much over the break. If it wasn't for the
uninterrupted stream of fixes for Intel drivers this PR would be very
slim. There was a handful of user reports, however, either they stood
out because of the lower traffic or users have had more time to test
over the break. The ones which are v6.7-relevant should be wrapped up.
Current release - regressions:
- Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum
required", it caused issues on networks where routers send prefixes
with preferred_lft=0
- wifi:
- iwlwifi: pcie: don't synchronize IRQs from IRQ, prevent deadlock
- mac80211: fix re-adding debugfs entries during reconfiguration
Current release - new code bugs:
- tcp: print AO/MD5 messages only if there are any keys
Previous releases - regressions:
- virtio_net: fix missing dma unmap for resize, prevent OOM
Previous releases - always broken:
- mptcp: prevent tcp diag from closing listener subflows
- nf_tables:
- set transport header offset for egress hook, fix IPv4 mangling
- skip set commit for deleted/destroyed sets, avoid double deactivation
- nat: make sure action is set for all ct states, fix openvswitch
matching on ICMP packets in related state
- eth: mlxbf_gige: fix receive hang under heavy traffic
- eth: r8169: fix PCI error on system resume for RTL8168FP
- net: add missing getsockopt(SO_TIMESTAMPING_NEW) and cmsg handling"
* tag 'net-6.7-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net/tcp: Only produce AO/MD5 logs if there are any keys
net: Implement missing SO_TIMESTAMPING_NEW cmsg support
bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()
net: ravb: Wait for operating mode to be applied
asix: Add check for usbnet_get_endpoints
octeontx2-af: Re-enable MAC TX in otx2_stop processing
octeontx2-af: Always configure NIX TX link credits based on max frame size
net/smc: fix invalid link access in dumping SMC-R connections
net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues
virtio_net: fix missing dma unmap for resize
igc: Fix hicredit calculation
ice: fix Get link status data length
i40e: Restore VF MSI-X state during PCI reset
i40e: fix use-after-free in i40e_aqc_add_filters()
net: Save and restore msg_namelen in sock_sendmsg
netfilter: nft_immediate: drop chain reference counter on error
netfilter: nf_nat: fix action not being set for all ct states
net: bcmgenet: Fix FCS generation for fragmented skbuffs
mptcp: prevent tcp diag from closing listener subflows
MAINTAINERS: add Geliang as reviewer for MPTCP
...
Commit 688eb8191b ("x86/csum: Improve performance of `csum_partial`")
ended up improving the code generation for the IP csum calculations, and
in particular special-casing the 40-byte case that is a hot case for
IPv6 headers.
It then had _another_ special case for the 64-byte unrolled loop, which
did two chains of 32-byte blocks, which allows modern CPU's to improve
performance by doing the chains in parallel thanks to renaming the carry
flag.
This just unifies the special cases and combines them into just one
single helper the 40-byte csum case, and replaces the 64-byte case by a
80-byte case that just does that single helper twice. It avoids having
all these different versions of inline assembly, and actually improved
performance further in my tests.
There was never anything magical about the 64-byte unrolled case, even
though it happens to be a common size (and typically is the cacheline
size).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The special case for odd aligned buffers is unnecessary and mostly
just adds overhead. Aligned buffers is the expectations, and even for
unaligned buffer, the only case that was helped is if the buffer was
1-byte from word aligned which is ~1/7 of the cases. Overall it seems
highly unlikely to be worth to extra branch.
It was left in the previous perf improvement patch because I was
erroneously comparing the exact output of `csum_partial(...)`, but
really we only need `csum_fold(csum_partial(...))` to match so its
safe to remove.
All csum kunit tests pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Laight <david.laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ilya Leoshkevich says:
====================
s390/bpf: Fix gotol with large offsets
Hi,
While looking at a pyperf180 failure on s390x (must be related to [1],
I'm not done with the investigation yet) I noticed that I have
unfortunately messed up the gotol implementation. Patch 1 is the fix,
patch 2 is a small test infrastructure tweak, and patch 3 adds a
test.
[1] https://github.com/llvm/llvm-project/issues/55669
Best regards,
Ilya
====================
Link: https://lore.kernel.org/r/20240102193531.3169422-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test gotol with offsets that don't fit into a short (i.e., larger than
32k or smaller than -32k).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Testing long jumps requires having >32k instructions. That many
instructions require the verifier log buffer of 2 megabytes.
The regular test_progs run doesn't need an increased buffer, since
gotol test with 40k instructions doesn't request a log,
but test_progs -v will set the verifier log level.
Hence to avoid breaking gotol test with -v increase the buffer size.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
WPAN world. Thanks to the recent improvements it was possible to
discover nearby devices, it is now also possible to associate with them
to form a sub-network using a specific PAN ID. The support includes
several functions, such as:
* Requesting an association to a coordinator, waiting for the response
* Sending a disassociation notification to a coordinator
* Receiving an association request when we are coordinator, answering
the request (for now all devices are accepted up to a limit, to be
refined)
* Sending a disassociation notification to a child
* Users may request the list of associated devices (the parent and the
children).
Here are a few example of userspace calls that can be made:
iwpan dev <dev> associate pan_id 2 coord $COORD
iwpan dev <dev> list_associations
iwpan dev <dev> disassociate ext_addr $COORD
There are as well two patches from Uwe turning remove callbacks into
void functions.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmWCqiYACgkQJWrqGEe9
VoQxEwf+KzU7esLoTgtIRG+wIQyMaBm8qZ/YNdWwgEiD+kwbybdy258etavumIMN
HSKxRypXqJwR+R4b9l6yhrLmwn83HNR0L1oq6sHooBD+Zr90Ac8NNgONcF30iRQS
jSiQ3A7H4kTqEaSsZe3olLotVnhTrLvL/TCXt83FPst551Fj0VSDyRnrbETEmq5F
s+WJcB8rGYWY6avv5CbWcUDOPPq7yiZlpgcA+qTIDFMUfD90p+xqUZQ2hZKlscMB
Ia/FPW3gUufWFGd16d1WBaHD38DoLobfo/6Ou/Sufp+ErW17ZOGl4wNnViXlOpwD
0BUEO6vhtAx+83VYAC522PABWHkxyw==
=THkg
-----END PGP SIGNATURE-----
Merge tag 'ieee802154-for-net-next-2023-12-20' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next
Miquel Raynal says:
====================
This pull request mainly brings support for dynamic associations in
the WPAN world. Thanks to the recent improvements it was possible to
discover nearby devices, it is now also possible to associate with them
to form a sub-network using a specific PAN ID. The support includes
several functions, such as:
* Requesting an association to a coordinator, waiting for the response
* Sending a disassociation notification to a coordinator
* Receiving an association request when we are coordinator, answering
the request (for now all devices are accepted up to a limit, to be
refined)
* Sending a disassociation notification to a child
* Users may request the list of associated devices (the parent and the
children).
Here are a few example of userspace calls that can be made:
# iwpan dev <dev> associate pan_id 2 coord $COORD
# iwpan dev <dev> list_associations
# iwpan dev <dev> disassociate ext_addr $COORD
There are as well two patches from Uwe turning remove callbacks into
void functions.
* tag 'ieee802154-for-net-next-2023-12-20' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next:
mac802154: Avoid new associations while disassociating
ieee802154: Avoid confusing changes after associating
mac802154: Only allow PAN controllers to process association requests
mac802154: Use the PAN coordinator parameter when stamping packets
mac80254: Provide real PAN coordinator info in beacons
ieee802154: Give the user the association list
mac802154: Handle disassociation notifications from peers
mac802154: Follow the number of associated devices
ieee802154: Add support for limiting the number of associated devices
mac802154: Handle association requests from peers
mac802154: Handle disassociations
ieee802154: Add support for user disassociation requests
mac802154: Handle associating
ieee802154: Add support for user association requests
ieee802154: Internal PAN management
ieee802154: Let PAN IDs be reset
ieee802154: hwsim: Convert to platform remove callback returning void
ieee802154: fakelb: Convert to platform remove callback returning void
====================
Link: https://lore.kernel.org/r/20231220095556.4d9cef91@xps-13
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhengchao Shao