Create gpbridge.h for the gpbridge-specific function prototypes, the
rest of the greybus drivers don't care about them.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Set retries operation was removed from the Greybus specification. Remove
gb_i2c_retries_operation and all other no longer necessary code bits from the
Greybus kernel code.
Signed-off-by: Michael Mogenson <michael.mogenson@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Set timeout operation was removed from the Greybus specification. Remove
gb_i2c_timeout_operation and all other no longer necessary code bits from the
Greybus kernel code.
Signed-off-by: Michael Mogenson <michael.mogenson@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Use hexadecimal notation for request types in log messages.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Provide finer-grained control of the audio streaming on APB1 by
splitting the transmit/receive start and stop requests into prepare,
start, stop, and shutdown.
CC: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Inotify does not handle sysfs events, so use poll instead.
The loopback kernel driver will send a notification when the test is
complete. So, open a poll file descriptor for every enabled device,
and after starting the test, wait for an event from each device.
After all events are received, read the total number of iterations
and make sure the test is complete.
Also, add missing stdint header which was included in inotify.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently, user space is notified for every message sent,
but this is not really needed and does not work in the async case
where all messages are sent from the start.
Instead, notify userspace only when all the transfers are complete.
This allows userspace to wait in a poll loop and wakeup only when
the test is finished.
Also, don't use the bundle kobj to send the notification it is
the loopback device that contains the loopback attributes.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
WARN_ON() is a bit harsh here, as we just failed to power-off the HID
device while it is getting removed.
Replace it with dev_err().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
hid_destroy_device() can potentially call callbacks defined in struct
hid_ll_driver, which may initiate few greybus operations.
And so connection (tx) should be kept enabled until the hid-device isn't
destroyed.
Reported-by: Jiss Kuruvila <jkuruvila@google.com>
Reported-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently, it is assumed that all audio data CPorts registered on
APB1 are used for transmitting audio data. That may not always be
true like when a microphone is connected but no speakers. Also,
the current special protocol lacks a way to tell APB1 whether the CPort
being registered is for transmitting, receiving, or both.
Fix by adding a 'direction' field to the register and unregister CPort
requests and define bits indicating which direction (or both) audio
data will go on that CPort.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Now that userspace is ready for all 32 bits of the vid/pid, take off our
mask and send the full values.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently, we are adding 0.5 to the average to round the average.
But we are using the remainder to calculate the decimal, so we do not
need to round the average.
In addition, use a u64 type for the remainder to avoid overflow
that might happen when stats->sum value is too big,
usually for requests per seconds and the throughput.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Throughput and requests per second calculations are broken for
asynchronous request.
Instead of calculate the throughput for each iteration,
calculate it once at the end of the test.
In addition, update every seconds the min and the max
for throughput and requests per second.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently, in case the case of error, statistics are updated for
asynchronous but not for an asynchronous operation.
Do not update the statistics in the case of error.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
For the async ping transfer, statistics are counted twice,
once after the after the gb_loopback_async_operation() and
once in the callback.
Only keep the one in the callback.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
lights can never be NULL at that point since lights_count must be different than
zero, and we need only to validate the light_id.
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
HUB3613 configuration, either disable (Standby mode) or enable (HUB mode)
is related to APB. So it makes perfect sense to put both of them
together in one function.
HUB3613 enable happens only at one place, in hub_conf_delayed_work() fn,
but disable is initiated from multiple places.
Move all calls to usb3613_hub_mode_ctrl(false) to apb_poweroff().
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
On first wake/detect pulse, everything works fine, as APB would be
in poweroff state initially.
But on subsequent wake/detect pulses, where APB is already in active
state, internal function just returns doing nothing, as it finds that
device is already in active state.
So the solution would be to make sure that, whenever execution reaches
to coldboot, make sure we power cycle it. Power off first, before
powering on.
Interrupt handler takes care of ignoring < 30msec pulses, so we should
be safe here to power cycle APB.
Testing Done: Testd on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add support for operations with short responses.
So far we have assumed that the initiator of an operation always knows
the exact size of the expected response. This is however not always the
case and we've worked around this limitation in a couple of places by,
for example, first requesting the size of a resource before fetching the
actual data.
To avoid such workarounds and simplify our protocols, add a
short-response flag that can be set when allocating an operation. When
this flag is set on an operation, core will accept a response that is
shorter than the size of the (pre-allocated) response payload buffer.
For now, we update the response-message payload_size field to reflect
the actual length of the response received.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
As a preparatory clean up, add a temporary variable to point to the
response message header.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In poweroff() fn, we are shutting down SVC, so disable interrupt
as well.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
With support of interrupt based mechanism, gpio is not longer set to
output mode, so gpio_set_value won't work. So use
gpio_direction_output() fn in poweroff(), while setting value on
wake/detect line.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Since now driver supports interrupt based mechanism to read events
from SVC over wake/detect line, no need to delay wake/detect assertion.
We can assert wake/detect after SVC reset deassertion, so during boot
itself SVC will start sending wake_out pulses.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch enabled interrupt support on events received over wake/detect
line. The driver follows below state machine,
Default: wake/detect line is high (WD_STATE_IDLE)
On Falling edge:
SVC initiates boot (either cold/standby).
On ES3, > 30msec = coldboot, else standby boot.
Driver moves to WD_STATE_BOOT_INIT
On rising edge (> 30msec):
SVC expects APB to coldboot
Driver wakes irq thread which kicks off APB coldboot
(WD_STATE_COLDBOOT_TRIG)
On rising edge (< 30msec):
Driver ignores it, do nothing.
After coldboot of APB, HUB configuration work is scheduled after 2 sec,
allowing enough time for APB<->SVC/Switch to linkup (in multiple
iterations)
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
If driver needs to process wake/detect events from SVC, by enabling
interrupt support on wake/detect event, it becomes easier to maintain
state of wake/detect line based on functionality.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This is preparation of interrupt handling support, where APB coldboot
and wake/detect handling will be handled as response to wake/detect
interrupt.
Due to slower I2C write operations in HUB configuration, it is important
to separate HUB configuration, and probably delay it after APB is
cold booted.
Note that delayed work will be scheduled from interrupt handler,
in following patches.
To satisfy build (and bisect), remove apb_cold_boot() fn, which will be
added back in the patch where it gets used again.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
With synchronization between SVC <=> AP over wake/detect line to
bring APB's out of reset, we do not need any extra delays now.
So remove it.
Testing Done: Tested for DB3.5 and EVT1.2 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make example module 1-5 a 2x2 module by adding a second, dummy
interface.
This is both an example of how a 2x2 module would be represented and
also suggests what a dummy interface may look like.
A 2x2 module has two child interface devices and a num_interfaces value
of two.
In this example, the secondary interface 1-5.6, is a dummy interface and
therefore lacks the normal identifying attributes (e.g. UniPro DDBL1 and
Ara ids). We may eventually add an interface_type attribute to
facilitate distinguishing various interface types (there may be more
than two).
In the following tree, the bundle attributes and child devices have been
left out:
greybus1/
├── 1-2
│ ├── 1-2.2
│ │ ├── 1-2.2.1
│ │ ├── 1-2.2.2
│ │ ├── ddbl1_manufacturer_id
│ │ ├── ddbl1_product_id
│ │ ├── interface_id
│ │ ├── product_id
│ │ ├── serial_number
│ │ ├── unique_id
│ │ └── vendor_id
│ ├── eject
│ ├── module_id
│ └── num_interfaces
├── 1-5
│ ├── 1-5.5
│ │ ├── 1-5.5.2
│ │ ├── ddbl1_manufacturer_id
│ │ ├── ddbl1_product_id
│ │ ├── interface_id
│ │ ├── product_id
│ │ ├── serial_number
│ │ ├── unique_id
│ │ └── vendor_id
│ ├── 1-5.6
│ │ └── interface_id
│ ├── eject
│ ├── module_id
│ └── num_interfaces
└── 1-svc
In this example there are two modules: 1-2 is a 1x2 module with one
interface, and 1-5 is a 2x2 module with two interfaces of which the
second (1-5.6) is a dummy interface.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Move example module 1-4 to position 5, effectively renaming it 1-5.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Introduce module devices and rename interface and bundle devices.
Greybus module devices correspond to physical modules and have one or
more interfaces. Modules have an id that is identical to the id of their
primary interface, which in turn is the interface with lowest numbered
id. The module name is constructed from the bus and module id:
<bus_id>-<module_id>
Interfaces and bundles are consequently renamed as
<bus_id>-<module_id>.<interface_id>
and
<bus_id>-<module_id>.<interface_id>.<bundle_id>
respectively.
As before, interface ids (and therefore in a sense now also module ids)
correspond to physical interface positions on the frame.
Modules have the following attributes:
eject
module_id
num_interfaces
where module_id is the id of the module and num_interface the number of
interfaces the module has.
Note that the interface ids of a module's interfaces are expected to be
<module_id>, <module_id + 1>, ..., <module_id + num_interfaces - 1>.
Writing a non-zero argument to eject cleanly shuts down and unregisters
all of the module interfaces before ejecting the module.
The example sysfs tree now looks as follows with the second bus
(APBridgeA) left out:
greybus1/
├── 1-2
│ ├── 1-2.2
│ │ ├── 1-2.2.1
│ │ │ ├── bundle_class
│ │ │ ├── bundle_id
│ │ │ └── state
│ │ ├── 1-2.2.2
│ │ │ ├── bundle_class
│ │ │ ├── bundle_id
│ │ │ └── state
│ │ ├── ddbl1_manufacturer_id
│ │ ├── ddbl1_product_id
│ │ ├── interface_id
│ │ ├── product_id
│ │ ├── serial_number
│ │ ├── unique_id
│ │ └── vendor_id
│ ├── eject
│ ├── module_id
│ └── num_interfaces
├── 1-4
│ ├── 1-4.4
│ │ ├── 1-4.4.2
│ │ │ ├── bundle_class
│ │ │ ├── bundle_id
│ │ │ ├── gpbridge0
│ │ │ │ ├── gpio
│ │ │ │ │ └── gpiochip490
│ │ │ │ └── i2c-4
│ │ │ └── state
│ │ ├── ddbl1_manufacturer_id
│ │ ├── ddbl1_product_id
│ │ ├── interface_id
│ │ ├── product_id
│ │ ├── serial_number
│ │ ├── unique_id
│ │ └── vendor_id
│ ├── eject
│ ├── module_id
│ └── num_interfaces
└── 1-svc
├── ap_intf_id
├── eject
└── endo_id
where greybus1 is a bus; 1-svc the svc; 1-2, and 1-4 are modules; 1-2.2
and 1-4.4 are (primary) interfaces; and 1-2.2.1, 1-2.2.2, and 1-4.4.2
are bundles.
Note that the svc eject attribute may eventually be renamed force_eject.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In kernel version 4.5, struct gpio_chip renamed the field 'dev' to
'parent' so handle this properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Use the bundle device directly in gpio error messages instead of the
gpio device, as they are the same pointer. This will make future gpio
api changes much easier to handle.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
If SVC coldboot fails or if of_platform_populate() fn fails,
then state of device needs to be reverted.
Importantly, if of_platform_populate() fails, then poweroff the SVC.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Fix incomplete receive-data sanity checks.
The payload size was never verified before parsing the uart header and
neither was the uart-header data size verified against the actual
payload size, something which could lead to information leaks when
passing data beyond the payload buffer to the tty layer.
Also remove the incorrect check against the maximum (tx-buffer) payload
size.
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Let's be well behaved and add a sanity check on the maximum greybus
payload size to avoid underflow on the calculated buffer size.
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The AP must enable the FCT flow of APBA once it has received the response
from the AP that the connection between APBA and a module has been setted up.
Disable the flow of FCT tokens when destroying connections.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Implement the control requests enabling/disabling the flow of FCT on APBA.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add control requests to enable/disable the flow of unipro FCT tokens
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In order to support mailbox-free control cport init on the bridges the AP must
be able to enable/disable the flow of unipro fct tokens. Add a new API that
will enable or disable on APBA the flow of fct tokens.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Have a check inside all individual operational state change functions
to check whether device is in same state, and if yes, then return
immediately.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
If user switches from fw_flashing => off mode, then we do not need
to do same things again, for example, clk_disable and wake/detect event,
as while switching to fw_flashing, driver makes sure that device goes
to off state and then brings back in fw_flashing state.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Have a check inside all individual operational state change functions
to check whether device is in same state, and if yes, then return
immediately.
Testing Done: Tested on DB3.5 platform
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rename the 'clock_mode' parameter to a more generic 'flags' in the csi
bus configuration structure.
Define flags value for continuous clock mode.
Signed-off-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add CSI configuration parameters to the configure_stream operation
response.
Currently, only the total number of lines in a second is used to configure the
the AP-Bridge CSI transmitter, all other parameters (number of CSI data
lanes, and CSI bus clock frequency) are kept hard-coded for two reasons:
1) We need to configure the CSI receiver on AP side accordingly to these
settings, before sending them to APB1 CSI transmitter.
2) We cannot use the camera module provided parameters as-is, but use
those information to compute the required bandwidth on the CSI bus, and
configure the # of CSI data lanes, and the CSI bus clock speed in a way that
satisfies that bandwidth requirement.
Signed-off-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We forgot to count the size of the uart send data message header when
calculating the maximum size of the buffer that the uart driver could
send in one chunk.
This fixes the math and makes the variable a size_t to match the return
value of the call to gb_operation_get_payload_size_max();
Reported-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Tested-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Remove unimplemented svc unique_id attribute from the documentation.
This attribute made more sense when we thought we'd have an AP-module,
unlike now when the AP and SVC are both part of the same frame.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
It might be of interest (to developers at least) to know when an
interface is getting created or removed from the system.
Interface creation message can further contain basic information about
the interface, like its vid/pid and mfg/prod ids.
Now, the interface is created by gb_interface_create(), which doesn't
register the intf->dev to the kernel and so the print message is rather
added to gb_interface_init() where we register the device with the
kernel.
A similar message is added to gb_interface_remove() only when the
interface was earlier initialized.
And this is how the output looks on real insertion/removal of the
module:
greybus 1-1: Interface added: VID=0x00000001, PID=0x00000001
greybus 1-1: DDBL1 Manufacturer=0x00000001, Product=0x00000001
...
greybus 1-1: Interface removed
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
