Roman Gushchin says:
====================
This patchset implements a cgroup bpf auto-detachment functionality:
bpf programs are detached as soon as possible after removal of the
cgroup, without waiting for the release of all associated resources.
Patches 2 and 3 are required to implement a corresponding kselftest
in patch 4.
v5:
1) rebase
v4:
1) release cgroup bpf data using a workqueue
2) add test_cgroup_attach to .gitignore
v3:
1) some minor changes and typo fixes
v2:
1) removed a bogus check in patch 4
2) moved buf[len] = 0 in patch 2
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a kselftest to cover bpf auto-detachment functionality.
The test creates a cgroup, associates some resources with it,
attaches a couple of bpf programs and deletes the cgroup.
Then it checks that bpf programs are going away in 5 seconds.
Expected output:
$ ./test_cgroup_attach
#override:PASS
#multi:PASS
#autodetach:PASS
test_cgroup_attach:PASS
On a kernel without auto-detaching:
$ ./test_cgroup_attach
#override:PASS
#multi:PASS
#autodetach:FAIL
test_cgroup_attach:FAIL
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Enable all available cgroup v2 controllers when setting up
the environment for the bpf kselftests. It's required to properly test
the bpf prog auto-detach feature. Also it will generally increase
the code coverage.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert test_cgrp2_attach2 example into a proper test_cgroup_attach
kselftest. It's better because we do run kselftest on a constant
basis, so there are better chances to spot a potential regression.
Also make it slightly less verbose to conform kselftests output style.
Output example:
$ ./test_cgroup_attach
#override:PASS
#multi:PASS
test_cgroup_attach:PASS
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently the lifetime of bpf programs attached to a cgroup is bound
to the lifetime of the cgroup itself. It means that if a user
forgets (or intentionally avoids) to detach a bpf program before
removing the cgroup, it will stay attached up to the release of the
cgroup. Since the cgroup can stay in the dying state (the state
between being rmdir()'ed and being released) for a very long time, it
leads to a waste of memory. Also, it blocks a possibility to implement
the memcg-based memory accounting for bpf objects, because a circular
reference dependency will occur. Charged memory pages are pinning the
corresponding memory cgroup, and if the memory cgroup is pinning
the attached bpf program, nothing will be ever released.
A dying cgroup can not contain any processes, so the only chance for
an attached bpf program to be executed is a live socket associated
with the cgroup. So in order to release all bpf data early, let's
count associated sockets using a new percpu refcounter. On cgroup
removal the counter is transitioned to the atomic mode, and as soon
as it reaches 0, all bpf programs are detached.
Because cgroup_bpf_release() can block, it can't be called from
the percpu ref counter callback directly, so instead an asynchronous
work is scheduled.
The reference counter is not socket specific, and can be used for any
other types of programs, which can be executed from a cgroup-bpf hook
outside of the process context, had such a need arise in the future.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: jolsa@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit fixes a few style problems in samples/bpf/bpf_load.c:
- Magic string use of 'DEBUGFS'
- Useless zero initialization of a global variable
- Minor style fix with whitespace
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Right now test_tunnel.sh always exits with success even if some
of the subtests fail. Since the output is very verbose, it's
hard to spot the issues with subtests. Let's fail the script
if any subtest fails.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Quentin Monnet says:
====================
This series adds an option to bpftool to make it print additional
information via libbpf and the kernel verifier when attempting to load
programs.
A new API function is added to libbpf in order to pass the log_level
from bpftool with the bpf_object__* part of the API.
Options for a finer control over the log levels to use for libbpf and
the verifier could be added in the future, if desired.
v3:
- Fix and clarify commit logs.
v2:
- Do not add distinct options for libbpf and verifier logs, just keep the
one that sets all log levels to their maximum. Rename the option.
- Do not offer a way to pick desired log levels. The choice is "use the
option to print all logs" or "stick with the defaults".
- Do not export BPF_LOG_* flags to user header.
- Update all man pages (most bpftool operations use libbpf and may print
libbpf logs). Verifier logs are only used when attempting to load
programs for now, so bpftool-prog.rst and bpftool.rst remain the only
pages updated in that regard.
Previous discussion available at:
https://lore.kernel.org/bpf/20190523105426.3938-1-quentin.monnet@netronome.com/https://lore.kernel.org/bpf/20190429095227.9745-1-quentin.monnet@netronome.com/
====================
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The "-d" option is used to require all logs available for bpftool. So
far it meant telling libbpf to print even debug-level information. But
there is another source of info that can be made more verbose: when we
attemt to load programs with bpftool, we can pass a log_level parameter
to the verifier in order to control the amount of information that is
printed to the console.
Reuse the "-d" option to print all information the verifier can tell. At
this time, this means logs related to BPF_LOG_LEVEL1, BPF_LOG_LEVEL2 and
BPF_LOG_STATS. As mentioned in the discussion on the first version of
this set, these macros are internal to the kernel
(include/linux/bpf_verifier.h) and are not meant to be part of the
stable user API, therefore we simply use the related constants to print
whatever we can at this time, without trying to tell users what is
log_level1 or what is statistics.
Verifier logs are only used when loading programs for now (In the
future: for loading BTF objects with bpftool? Although libbpf does not
currently offer to print verifier info at debug level if no error
occurred when loading BTF objects), so bpftool.rst and bpftool-prog.rst
are the only man pages to get the update.
v3:
- Add details on log level and BTF loading at the end of commit log.
v2:
- Remove the possibility to select the log levels to use (v1 offered a
combination of "log_level1", "log_level2" and "stats").
- The macros from kernel header bpf_verifier.h are not used (and
therefore not moved to UAPI header).
- In v1 this was a distinct option, but is now merged in the only "-d"
switch to activate libbpf and verifier debug-level logs all at the
same time.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf was recently made aware of the log_level attribute for programs,
used to specify the level of information expected to be dumped by the
verifier. Function bpf_prog_load_xattr() got support for this log_level
parameter.
But some applications using libbpf rely on another function to load
programs, bpf_object__load(), which does accept any parameter for log
level. Create an API function based on bpf_object__load(), but accepting
an "attr" object as a parameter. Then add a log_level field to that
object, so that applications calling the new bpf_object__load_xattr()
can pick the desired log level.
v3:
- Rewrite commit log.
v2:
- We are in a new cycle, bump libbpf extraversion number.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf has three levels of priority for output messages: warn, info,
debug. By default, debug output is not printed to the console.
Add a new "--debug" (short name: "-d") option to bpftool to print libbpf
logs for all three levels.
Internally, we simply use the function provided by libbpf to replace the
default printing function by one that prints logs regardless of their
level.
v2:
- Remove the possibility to select the log-levels to use (v1 offered a
combination of "warn", "info" and "debug").
- Rename option and offer a short name: -d|--debug.
- Add option description to all bpftool manual pages (instead of
bpftool-prog.rst only), as all commands use libbpf.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix below warning reported by coccicheck:
/tools/lib/bpf/libbpf.c:3461:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use fgets() as the while loop condition.
Signed-off-by: Chang-Hsien Tsai <luke.tw@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
introduced bpf_send_signal() helper. If the context is nmi,
the sending signal work needs to be deferred to irq_work.
If the signal is invalid, the error will appear in irq_work
and it won't be propagated to user.
This patch did an early check in the helper itself to notify
user invalid signal, as suggested by Daniel.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Auto-complete BTF IDs for `btf dump id` sub-command. List of possible BTF
IDs is scavenged from loaded BPF programs that have associated BTFs, as
there is currently no API in libbpf to fetch list of all BTFs in the
system.
Suggested-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commit adds ibumad to .gitignore which is
currently ommited from the ignore file.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiong Wang says:
====================
v9:
- Split patch 5 in v8.
make bpf uapi header file sync a separate patch. (Alexei)
v8:
- For stack slot read, mark them as REG_LIVE_READ64. (Alexei)
- Change DEF_NOT_SUBREG from -1 to 0. (Alexei)
- Rebased on top of latest bpf-next.
v7:
- Drop the first patch in v6, the one adding 32-bit return value and
argument type. (Alexei)
- Rename bpf_jit_hardware_zext to bpf_jit_needs_zext. (Alexei)
- Use mov32 with imm == 1 to indicate it is zext. (Alexei)
- JIT back-ends peephole next insn to optimize out unnecessary zext
inserted by verifier. (Alexei)
- Testing:
+ patch set tested (bpf selftest) on x64 host with llvm 9.0
no regression observed no both JIT and interpreter modes.
+ patch set tested (bpf selftest) on x32 host.
By Yanqing Wang, thanks!
no regression observed on both JIT and interpreter modes.
+ patch set tested (bpf selftest) on RV64 host with llvm 9.0,
By Björn Töpel, thanks!
no regression observed before and after this set with JIT_ALWAYS_ON.
test_progs_32 also enabled as LLVM 9.0 is used by Björn.
+ cross compiled the other affected targets, arm, PowerPC, SPARC, S390.
v6:
- Fixed s390 kbuild test robot error. (kbuild)
- Make comment style in backends patches more consistent.
v5:
- Adjusted several test_verifier helpers to make them works on hosts
w and w/o hardware zext. (Naveen)
- Make sure zext flag not set when verifier by-passed, for example,
libtest_bpf.ko. (Naveen)
- Conservatively mark bpf main return value as 64-bit. (Alexei)
- Make sure read flag is either READ64 or READ32, not the mix of both.
(Alexei)
- Merged patch 1 and 2 in v4. (Alexei)
- Fixed kbuild test robot warning on NFP. (kbuild)
- Proposed new BPF_ZEXT insn to have optimal code-gen for various JIT
back-ends.
- Conservately set zext flags for patched-insn.
- Fixed return value zext for helper function calls.
- Also adjusted test_verifier scalability unit test to avoid triggerring
too many insn patch which will hang computer.
- re-tested on x86 host with llvm 9.0, no regression on test_verifier,
test_progs, test_progs_32.
- re-tested offload target (nfp), no regression on local testsuite.
v4:
- added the two missing fixes which addresses two Jakub's reviewes in v3.
- rebase on top of bpf-next.
v3:
- remove redundant check in "propagate_liveness_reg". (Jakub)
- add extra check in "mark_reg_read" to prune more search. (Jakub)
- re-implemented "prog_flags" passing mechanism, removed use of
global switch inside libbpf.
- enabled high 32-bit randomization beyond "test_verifier" and
"test_progs". Now it should have been enabled for all possible
tests. Re-run all tests, haven't noticed regression.
- remove RFC tag.
v2:
- rebased on top of bpf-next master.
- added comments for what is sub-register def index. (Edward, Alexei)
- removed patch 1 which turns bit mask from enum to macro. (Alexei)
- removed sysctl/bpf_jit_32bit_opt. (Alexei)
- merged sub-register def insn index into reg state. (Alexei)
- change test methodology (Alexei):
+ instead of simple unit tests on x86_64 for which this optimization
doesn't enabled due to there is hardware support, poison high
32-bit for whose def identified as safe to do so. this could let
the correctness of this patch set checked when daily bpf selftest
ran which delivers very stressful test on host machine like x86_64.
+ hi32 poisoning is gated by a new BPF_F_TEST_RND_HI32 prog flags.
+ BPF_F_TEST_RND_HI32 is enabled for all tests of "test_progs" and
"test_verifier", the latter needs minor tweak on two unit tests,
please see the patch for the change.
+ introduced a new global variable "libbpf_test_mode" into libbpf.
once it is set to true, it will set BPF_F_TEST_RND_HI32 for all the
later PROG_LOAD syscall, the goal is to easy the enable of hi32
poison on exsiting testsuite.
we could also introduce new APIs, for example "bpf_prog_test_load",
then use -Dbpf_prog_load=bpf_prog_test_load to migrate tests under
test_progs, but there are several load APIs, and such new API need
some change on struture like "struct bpf_prog_load_attr".
+ removed old unit tests. it is based on insn scan and requires quite
a few test_verifier generic code change. given hi32 randomization
could offer good test coverage, the unit tests doesn't add much
extra test value.
- enhanced register width check ("is_reg64") when record sub-register
write, now, it returns more accurate width.
- Re-run all tests under "test_progs" and "test_verifier" on x86_64, no
regression. Fixed a couple of bugs exposed:
1. ctx field size transformation was not taken into account.
2. insn patch could cause lost of original aux data which is
important for ctx field conversion.
3. return value for propagate_liveness was wrong and caused
regression on processed insn number.
4. helper call arg wasn't handled properly that path prune may cause
64-bit read info in pruned path lost.
- Re-run Cilium bpf prog for processed-insn-number benchmarking, no
regression.
v1:
- Fixed the missing handling on callee-saved for bpf-to-bpf call,
sub-register defs therefore moved to frame state. (Jakub Kicinski)
- Removed redundant "cross_reg". (Jakub Kicinski)
- Various coding styles & grammar fixes. (Jakub Kicinski, Quentin Monnet)
eBPF ISA specification requires high 32-bit cleared when low 32-bit
sub-register is written. This applies to destination register of ALU32 etc.
JIT back-ends must guarantee this semantic when doing code-gen. x86_64 and
AArch64 ISA has the same semantics, so the corresponding JIT back-end
doesn't need to do extra work.
However, 32-bit arches (arm, x86, nfp etc.) and some other 64-bit arches
(PowerPC, SPARC etc) need to do explicit zero extension to meet this
requirement, otherwise code like the following will fail.
u64_value = (u64) u32_value
... other uses of u64_value
This is because compiler could exploit the semantic described above and
save those zero extensions for extending u32_value to u64_value, these JIT
back-ends are expected to guarantee this through inserting extra zero
extensions which however could be a significant increase on the code size.
Some benchmarks show there could be ~40% sub-register writes out of total
insns, meaning at least ~40% extra code-gen.
One observation is these extra zero extensions are not always necessary.
Take above code snippet for example, it is possible u32_value will never be
casted into a u64, the value of high 32-bit of u32_value then could be
ignored and extra zero extension could be eliminated.
This patch implements this idea, insns defining sub-registers will be
marked when the high 32-bit of the defined sub-register matters. For
those unmarked insns, it is safe to eliminate high 32-bit clearnace for
them.
Algo
====
We could use insn scan based static analysis to tell whether one
sub-register def doesn't need zero extension. However, using such static
analysis, we must do conservative assumption at branching point where
multiple uses could be introduced. So, for any sub-register def that is
active at branching point, we need to mark it as needing zero extension.
This could introducing quite a few false alarms, for example ~25% on
Cilium bpf_lxc.
It will be far better to use dynamic data-flow tracing which verifier
fortunately already has and could be easily extend to serve the purpose of
this patch set.
- Split read flags into READ32 and READ64.
- Record index of insn that does sub-register write. Keep the index inside
reg state and update it during verifier insn walking.
- A full register read on a sub-register marks its definition insn as
needing zero extension on dst register.
A new sub-register write overrides the old one.
- When propagating read64 during path pruning, also mark any insn defining
a sub-register that is read in the pruned path as full-register.
Benchmark
=========
- I estimate the JITed image could be 10% ~ 30% smaller on these affected
arches (nfp, arm, x32, risv, ppc, sparc, s390), depending on the prog.
- For Cilium bpf_lxc, there is ~11500 insns in the compiled binary (use
latest LLVM snapshot, and with -mcpu=v3 -mattr=+alu32 enabled), 4460 of
them has sub-register writes (~40%). Calculated by:
cat dump | grep -P "\tw" | wc -l (ALU32)
cat dump | grep -P "r.*=.*u32" | wc -l (READ_W)
cat dump | grep -P "r.*=.*u16" | wc -l (READ_H)
cat dump | grep -P "r.*=.*u8" | wc -l (READ_B)
After this patch set enabled, > 25% of those 4460 could be identified as
doesn't needing zero extension on the destination, and the percentage
could go further up to more than 50% with some follow up optimizations
based on the infrastructure offered by this set. This leads to
significant save on JITed image.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch eliminate zero extension code-gen for instructions including
both alu and load/store. The only exception is for ctx load, because
offload target doesn't go through host ctx convert logic so we do
customized load and ignores zext flag set by verifier.
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Tested-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The previous libbpf patch allows user to specify "prog_flags" to bpf
program load APIs. To enable high 32-bit randomization for a test, we need
to set BPF_F_TEST_RND_HI32 in "prog_flags".
To enable such randomization for all tests, we need to make sure all places
are passing BPF_F_TEST_RND_HI32. Changing them one by one is not
convenient, also, it would be better if a test could be switched to
"normal" running mode without code change.
Given the program load APIs used across bpf selftests are mostly:
bpf_prog_load: load from file
bpf_load_program: load from raw insns
A test_stub.c is implemented for bpf seltests, it offers two functions for
testing purpose:
bpf_prog_test_load
bpf_test_load_program
The are the same as "bpf_prog_load" and "bpf_load_program", except they
also set BPF_F_TEST_RND_HI32. Given *_xattr functions are the APIs to
customize any "prog_flags", it makes little sense to put these two
functions into libbpf.
Then, the following CFLAGS are passed to compilations for host programs:
-Dbpf_prog_load=bpf_prog_test_load
-Dbpf_load_program=bpf_test_load_program
They migrate the used load APIs to the test version, hence enable high
32-bit randomization for these tests without changing source code.
Besides all these, there are several testcases are using
"bpf_prog_load_attr" directly, their call sites are updated to pass
BPF_F_TEST_RND_HI32.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- bpf_fill_ld_abs_vlan_push_pop:
Prevent zext happens inside PUSH_CNT loop. This could happen because
of BPF_LD_ABS (32-bit def) + BPF_JMP (64-bit use), or BPF_LD_ABS +
EXIT (64-bit use of R0). So, change BPF_JMP to BPF_JMP32 and redefine
R0 at exit path to cut off the data-flow from inside the loop.
- bpf_fill_jump_around_ld_abs:
Jump range is limited to 16 bit. every ld_abs is replaced by 6 insns,
but on arches like arm, ppc etc, there will be one BPF_ZEXT inserted
to extend the error value of the inlined ld_abs sequence which then
contains 7 insns. so, set the dividend to 7 so the testcase could
work on all arches.
- bpf_fill_scale1/bpf_fill_scale2:
Both contains ~1M BPF_ALU32_IMM which will trigger ~1M insn patcher
call because of hi32 randomization later when BPF_F_TEST_RND_HI32 is
set for bpf selftests. Insn patcher is not efficient that 1M call to
it will hang computer. So , change to BPF_ALU64_IMM to avoid hi32
randomization.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
libbpf doesn't allow passing "prog_flags" during bpf program load in a
couple of load related APIs, "bpf_load_program_xattr", "load_program" and
"bpf_prog_load_xattr".
It makes sense to allow passing "prog_flags" which is useful for
customizing program loading.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch randomizes high 32-bit of a definition when BPF_F_TEST_RND_HI32
is set.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sync new bpf prog load flag "BPF_F_TEST_RND_HI32" to tools/.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
x86_64 and AArch64 perhaps are two arches that running bpf testsuite
frequently, however the zero extension insertion pass is not enabled for
them because of their hardware support.
It is critical to guarantee the pass correction as it is supposed to be
enabled at default for a couple of other arches, for example PowerPC,
SPARC, arm, NFP etc. Therefore, it would be very useful if there is a way
to test this pass on for example x86_64.
The test methodology employed by this set is "poisoning" useless bits. High
32-bit of a definition is randomized if it is identified as not used by any
later insn. Such randomization is only enabled under testing mode which is
gated by the new bpf prog load flags "BPF_F_TEST_RND_HI32".
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After previous patches, verifier will mark a insn if it really needs zero
extension on dst_reg.
It is then for back-ends to decide how to use such information to eliminate
unnecessary zero extension code-gen during JIT compilation.
One approach is verifier insert explicit zero extension for those insns
that need zero extension in a generic way, JIT back-ends then do not
generate zero extension for sub-register write at default.
However, only those back-ends which do not have hardware zero extension
want this optimization. Back-ends like x86_64 and AArch64 have hardware
zero extension support that the insertion should be disabled.
This patch introduces new target hook "bpf_jit_needs_zext" which returns
false at default, meaning verifier zero extension insertion is disabled at
default. A back-end could override this hook to return true if it doesn't
have hardware support and want verifier insert zero extension explicitly.
Offload targets do not use this native target hook, instead, they could
get the optimization results using bpf_prog_offload_ops.finalize.
NOTE: arches could have diversified features, it is possible for one arch
to have hardware zero extension support for some sub-register write insns
but not for all. For example, PowerPC, SPARC have zero extended loads, but
not for alu32. So when verifier zero extension insertion enabled, these JIT
back-ends need to peephole insns to remove those zero extension inserted
for insn that actually has hardware zero extension support. The peephole
could be as simple as looking the next insn, if it is a special zero
extension insn then it is safe to eliminate it if the current insn has
hardware zero extension support.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The encoding for this new variant is based on BPF_X format. "imm" field was
0 only, now it could be 1 which means doing zero extension unconditionally
.code = BPF_ALU | BPF_MOV | BPF_X
.dst_reg = DST
.src_reg = SRC
.imm = 1
We use this new form for doing zero extension for which verifier will
guarantee SRC == DST.
Implications on JIT back-ends when doing code-gen for
BPF_ALU | BPF_MOV | BPF_X:
1. No change if hardware already does zero extension unconditionally for
sub-register write.
2. Otherwise, when seeing imm == 1, just generate insns to clear high
32-bit. No need to generate insns for the move because when imm == 1,
dst_reg is the same as src_reg at the moment.
Interpreter doesn't need change as well. It is doing unconditionally zero
extension for mov32 already.
One helper macro BPF_ZEXT_REG is added to help creating zero extension
insn using this new mov32 variant.
One helper function insn_is_zext is added for checking one insn is an
zero extension on dst. This will be widely used by a few JIT back-ends in
later patches in this set.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Patched insns do not go through generic verification, therefore doesn't has
zero extension information collected during insn walking.
We don't bother analyze them at the moment, for any sub-register def comes
from them, just conservatively mark it as needing zero extension.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
eBPF ISA specification requires high 32-bit cleared when low 32-bit
sub-register is written. This applies to destination register of ALU32 etc.
JIT back-ends must guarantee this semantic when doing code-gen. x86_64 and
AArch64 ISA has the same semantics, so the corresponding JIT back-end
doesn't need to do extra work.
However, 32-bit arches (arm, x86, nfp etc.) and some other 64-bit arches
(PowerPC, SPARC etc) need to do explicit zero extension to meet this
requirement, otherwise code like the following will fail.
u64_value = (u64) u32_value
... other uses of u64_value
This is because compiler could exploit the semantic described above and
save those zero extensions for extending u32_value to u64_value, these JIT
back-ends are expected to guarantee this through inserting extra zero
extensions which however could be a significant increase on the code size.
Some benchmarks show there could be ~40% sub-register writes out of total
insns, meaning at least ~40% extra code-gen.
One observation is these extra zero extensions are not always necessary.
Take above code snippet for example, it is possible u32_value will never be
casted into a u64, the value of high 32-bit of u32_value then could be
ignored and extra zero extension could be eliminated.
This patch implements this idea, insns defining sub-registers will be
marked when the high 32-bit of the defined sub-register matters. For
those unmarked insns, it is safe to eliminate high 32-bit clearnace for
them.
Algo:
- Split read flags into READ32 and READ64.
- Record index of insn that does sub-register write. Keep the index inside
reg state and update it during verifier insn walking.
- A full register read on a sub-register marks its definition insn as
needing zero extension on dst register.
A new sub-register write overrides the old one.
- When propagating read64 during path pruning, also mark any insn defining
a sub-register that is read in the pruned path as full-register.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song says:
====================
This patch tries to solve the following specific use case.
Currently, bpf program can already collect stack traces
through kernel function get_perf_callchain()
when certain events happens (e.g., cache miss counter or
cpu clock counter overflows). But such stack traces are
not enough for jitted programs, e.g., hhvm (jited php).
To get real stack trace, jit engine internal data structures
need to be traversed in order to get the real user functions.
bpf program itself may not be the best place to traverse
the jit engine as the traversing logic could be complex and
it is not a stable interface either.
Instead, hhvm implements a signal handler,
e.g. for SIGALARM, and a set of program locations which
it can dump stack traces. When it receives a signal, it will
dump the stack in next such program location.
This patch implements bpf_send_signal() helper to send
a signal to hhvm in real time, resulting in intended stack traces.
Patch #1 implemented the bpf_send_helper() in the kernel.
Patch #2 synced uapi header bpf.h to tools directory.
Patch #3 added a self test which covers tracepoint
and perf_event bpf programs.
Changelogs:
v4 => v5:
. pass the "current" task struct to irq_work as well
since the current task struct may change between
nmi and subsequent irq_work_interrupt.
Discovered by Daniel.
v3 => v4:
. fix one typo and declare "const char *id_path = ..."
to avoid directly use the long string in the func body
in Patch #3.
v2 => v3:
. change the standalone test to be part of prog_tests.
RFC v1 => v2:
. previous version allows to send signal to an arbitrary
pid. This version just sends the signal to current
task to avoid unstable pid and potential races between
sending signals and task state changes for the pid.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The bpf uapi header include/uapi/linux/bpf.h is sync'ed
to tools/include/uapi/linux/bpf.h.
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch tries to solve the following specific use case.
Currently, bpf program can already collect stack traces
through kernel function get_perf_callchain()
when certain events happens (e.g., cache miss counter or
cpu clock counter overflows). But such stack traces are
not enough for jitted programs, e.g., hhvm (jited php).
To get real stack trace, jit engine internal data structures
need to be traversed in order to get the real user functions.
bpf program itself may not be the best place to traverse
the jit engine as the traversing logic could be complex and
it is not a stable interface either.
Instead, hhvm implements a signal handler,
e.g. for SIGALARM, and a set of program locations which
it can dump stack traces. When it receives a signal, it will
dump the stack in next such program location.
Such a mechanism can be implemented in the following way:
. a perf ring buffer is created between bpf program
and tracing app.
. once a particular event happens, bpf program writes
to the ring buffer and the tracing app gets notified.
. the tracing app sends a signal SIGALARM to the hhvm.
But this method could have large delays and causing profiling
results skewed.
This patch implements bpf_send_signal() helper to send
a signal to hhvm in real time, resulting in intended stack traces.
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Andrii Nakryiko says:
====================
This patch set adds BTF-to-C dumping APIs to libbpf, allowing to output
a subset of BTF types as a compilable C type definitions. This is useful by
itself, as raw BTF output is not easy to inspect and comprehend. But it's also
a big part of BPF CO-RE (compile once - run everywhere) initiative aimed at
allowing to write relocatable BPF programs, that won't require on-the-host
kernel headers (and would be able to inspect internal kernel structures, not
exposed through kernel headers).
This patch set consists of three groups of patches and one pre-patch, with the
BTF-to-C dumper API depending on the first two groups.
Pre-patch #1 fixes issue with libbpf_internal.h.
btf__parse_elf() API patches:
- patch #2 adds btf__parse_elf() API to libbpf, allowing to load BTF and/or
BTF.ext from ELF file;
- patch #3 utilizies btf__parse_elf() from bpftool for `btf dump file` command;
- patch #4 switches test_btf.c to use btf__parse_elf() to check for presence
of BTF data in object file.
libbpf's internal hashmap patches:
- patch #5 adds resizeable non-thread safe generic hashmap to libbpf;
- patch #6 adds tests for that hashmap;
- patch #7 migrates btf_dedup()'s dedup_table to use hashmap w/ APPEND.
BTF-to-C dumper API patches:
- patch #8 adds btf_dump APIs with all the logic for laying out type
definitions in correct order and emitting C syntax for them;
- patch #9 adds lots of tests for common and quirky parts of C type system;
- patch #10 adds support for C-syntax btf dumping to bpftool;
- patch #11 updates bpftool documentation to mention C-syntax dump option;
- patch #12 update bash-completion for btf dump sub-command.
v2->v3:
- fix bpftool-btf.rst formatting (Quentin);
- simplify bash autocompletion script (Quentin);
- better error message in btf dump (Quentin);
v1->v2:
- removed unuseful file header (Jakub);
- removed inlines in .c (Jakub);
- added 'format {c|raw}' keyword/option (Jakub);
- re-use i var for iteration in btf_dump_c() (Jakub);
- bumped libbpf version to 0.0.4;
v0->v1:
- fix bug in hashmap__for_each_bucket_entry() not handling empty hashmap;
- removed `btf dump`-specific libbpf logging hook up (Quentin has more generic
patchset);
- change btf__parse_elf() to always load .BTF and return it as a result, with
.BTF.ext being optional and returned through struct btf_ext** arg (Alexei);
- endianness check to use __BYTE_ORDER__ (Alexei);
- bool:1 to __u8:1 in type_aux_state (Alexei);
- added HASHMAP_APPEND strategy to hashmap, changed
hashmap__for_each_key_entry() to also check for key equality during
iteration (multimap iteration for key);
- added new tests for empty hashmap and hashmap as a multimap;
- tried to clarify weak/strong dependency ordering comments (Alexei)
- btf dump test's expected output - support better commenting aproach (Alexei);
- added bash-completion for a new "c" option (Alexei).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Utilize new libbpf's btf_dump API to emit BTF as a C definitions.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new test_btf_dump set of tests, validating BTF-to-C conversion
correctness. Tests rely on clang to generate BTF from provided C test
cases.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BTF contains enough type information to allow generating valid
compilable C header w/ correct layout of structs/unions and all the
typedef/enum definitions. This patch adds a new "object" - btf_dump to
facilitate dumping BTF as valid C. btf_dump__dump_type() is the main API
which takes care of dumping out (through user-provided printf-like
callback function) C definitions for given type ID and it's required
dependencies. This allows for not just dumping out entirety of BTF types,
but also selective filtering based on user-provided criterias w/ minimal
set of dependent types.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a need for fast point lookups inside libbpf for multiple use
cases (e.g., name resolution for BTF-to-C conversion, by-name lookups in
BTF for upcoming BPF CO-RE relocation support, etc). This patch
implements simple resizable non-thread safe hashmap using single linked
list chains.
Four different insert strategies are supported:
- HASHMAP_ADD - only add key/value if key doesn't exist yet;
- HASHMAP_SET - add key/value pair if key doesn't exist yet; otherwise,
update value;
- HASHMAP_UPDATE - update value, if key already exists; otherwise, do
nothing and return -ENOENT;
- HASHMAP_APPEND - always add key/value pair, even if key already exists.
This turns hashmap into a multimap by allowing multiple values to be
associated with the same key. Most useful read API for such hashmap is
hashmap__for_each_key_entry() iteration. If hashmap__find() is still
used, it will return last inserted key/value entry (first in a bucket
chain).
For HASHMAP_SET and HASHMAP_UPDATE, old key/value pair is returned, so
that calling code can handle proper memory management, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Switch test_btf.c to rely on btf__parse_elf to check presence of BTF and
BTF.ext data, instead of implementing its own ELF parsing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Loading BTF and BTF.ext from ELF file is a common need. Instead of
requiring every user to re-implement it, let's provide this API from
libbpf itself. It's mostly copy/paste from `bpftool btf dump`
implementation, which will be switched to libbpf's version in next
patch. btf__parse_elf allows to load BTF and optionally BTF.ext.
This is also useful for tests that need to load/work with BTF, loaded
from test ELF files.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
