[ Upstream commit 806a3bc421 ]
Currently, when GETDEVICEINFO returns multiple locations where each
is a different IP but the server's identity is same as MDS, then
nfs4_set_ds_client() finds the existing nfs_client structure which
has the MDS's max_connect value (and if it's 1), then the 1st IP
on the DS's list will get dropped due to MDS trunking rules. Other
IPs would be added as they fall under the pnfs trunking rules.
For the list of IPs the 1st goes thru calling nfs4_set_ds_client()
which will eventually call nfs4_add_trunk() and call into
rpc_clnt_test_and_add_xprt() which has the check for MDS trunking.
The other IPs (after the 1st one), would call rpc_clnt_add_xprt()
which doesn't go thru that check.
nfs4_add_trunk() is called when MDS trunking is happening and it
needs to enforce the usage of max_connect mount option of the
1st mount. However, this shouldn't be applied to pnfs flow.
Instead, this patch proposed to treat MDS=DS as DS trunking and
make sure that MDS's max_connect limit does not apply to the
1st IP returned in the GETDEVICEINFO list. It does so by
marking the newly created client with a new flag NFS_CS_PNFS
which then used to pass max_connect value to use into the
rpc_clnt_test_and_add_xprt() instead of the existing rpc
client's max_connect value set by the MDS connection.
For example, mount was done without max_connect value set
so MDS's rpc client has cl_max_connect=1. Upon calling into
rpc_clnt_test_and_add_xprt() and using rpc client's value,
the caller passes in max_connect value which is previously
been set in the pnfs path (as a part of handling
GETDEVICEINFO list of IPs) in nfs4_set_ds_client().
However, when NFS_CS_PNFS flag is not set and we know we
are doing MDS trunking, comparing a new IP of the same
server, we then set the max_connect value to the
existing MDS's value and pass that into
rpc_clnt_test_and_add_xprt().
Fixes: dc48e0abee ("SUNRPC enforce creation of no more than max_connect xprts")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51d674a5e4 ]
After receiving the location(s) of the DS server(s) in the
GETDEVINCEINFO, create the request for the clientid to such
server and indicate that the client is connecting to a DS.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable-dep-of: 806a3bc421 ("NFSv4.1: fix pnfs MDS=DS session trunking")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 611fa42dfa ]
If the server rejects the credential as being stale, or bad, then we
should mark it for revalidation before retransmitting.
Fixes: 7f5667a5f8 ("SUNRPC: Clean up rpc_verify_header()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd7d7ee3ba ]
With IPv6, connect() can occasionally return EINVAL if a route is
unavailable. If this happens during I/O to a data server, we want to
report it using LAYOUTERROR as an inability to connect.
Fixes: dd52128afd ("NFSv4.1/pnfs Ensure flexfiles reports all connection related errors")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b11243f720 ]
Ensure that all requests are put back onto the commit list so that they
can be rescheduled.
Fixes: 4daaeba938 ("NFS: Fix nfs_direct_write_reschedule_io()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b193a78ddb ]
Ensure that nfs_clear_request_commit() updates the correct counters when
it removes them from the commit list.
Fixes: ed5d588fe4 ("NFS: Try to join page groups before an O_DIRECT retransmission")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8982f7aff3 ]
If we hit a fatal error when retransmitting, we do need to record the
removal of the request from the count of written bytes.
Fixes: 031d73ed76 ("NFS: Fix O_DIRECT accounting of number of bytes read/written")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 954998b60c ]
If we fail to schedule a request for transmission, there are 2
possibilities:
1) Either we hit a fatal error, and we just want to drop the remaining
requests on the floor.
2) We were asked to try again, in which case we should allow the
outstanding RPC calls to complete, so that we can recoalesce requests
and try again.
Fixes: d600ad1f2b ("NFS41: pop some layoutget errors to application")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aee9d30b97 upstream.
Commit
7825451fa4 ("static_call: Add call depth tracking support")
failed to realize the problem fixed there is not specific to call depth
tracking but applies to all return-thunk uses.
Move the fix to the appropriate place and condition.
Fixes: ee88d363d1 ("x86,static_call: Use alternative RET encoding")
Reported-by: David Kaplan <David.Kaplan@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ba89dd6dd upstream.
The following commit
095b8303f3 ("x86/alternative: Make custom return thunk unconditional")
made '__x86_return_thunk' a placeholder value. All code setting
X86_FEATURE_RETHUNK also changes the value of 'x86_return_thunk'. So
the optimization at the beginning of apply_returns() is dead code.
Also, before the above-mentioned commit, the optimization actually had a
bug It bypassed __static_call_fixup(), causing some raw returns to
remain unpatched in static call trampolines. Thus the 'Fixes' tag.
Fixes: d2408e043e ("x86/alternative: Optimize returns patching")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/16d19d2249d4485d8380fb215ffaae81e6b8119e.1693889988.git.jpoimboe@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1361917030 upstream.
Teach lockdep that icc_bw_lock is needed in code paths that could
deadlock if they trigger reclaim.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20230807171148.210181-8-robdclark@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35588314e9 upstream.
The offset is just 32bits here so this can potentially overflow if
somebody specifies a large value. Instead reduce the size to calculate
the last possible offset.
The error handling path incorrectly drops the reference to the user
fence BO resulting in potential reference count underflow.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 75bb29b6c4 which is
commit 86327e8eb9 upstream.
It breaks existing runc systems, as the tool always thinks the file
should be present.
Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Link: https://lore.kernel.org/r/20230920081101.GA12096@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2931937844 upstream.
[HOW & Why]
There seems to be an issue with 2nd DPIA acquiring link encoder for tiled displays.
Solution is to remove check for eng_id before we get first dynamic encoder for it
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64be47ba28 upstream.
For DPIA we should have preferred DIG assignment based on DPIA selected
as per the ASIC design.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef064187a9 upstream.
Dropping bit 31:4 of page table base is wrong, it makes page table
base points to wrong address if phys addr is beyond 64GB; dropping
page_table_start/end bit 31:4 is unnecessary since dcn20_vmid_setup
will do that. Also, while we are at it, cleanup the assignments using
upper_32_bits()/lower_32_bits() and AMDGPU_GPU_PAGE_SHIFT.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Fixes: 81d0bcf990 ("drm/amdgpu: make display pinning more flexible (v2)")
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Co-developed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec5fa9fcde upstream.
[Why]
In drm_dp_mst_topology_mgr_resume() today, it will resume the
mst branch to be ready handling mst mode and also consecutively do
the mst topology probing. Which will cause the dirver have chance
to fire hotplug event before restoring the old state. Then Userspace
will react to the hotplug event based on a wrong state.
[How]
Adjust the mst resume flow as:
1. set dpcd to resume mst branch status
2. restore source old state
3. Do mst resume topology probing
For drm_dp_mst_topology_mgr_resume(), it's better to adjust it to
pull out topology probing work into a 2nd part procedure of the mst
resume. Will have a follow up patch in drm.
Reviewed-by: Chao-kai Wang <stylon.wang@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 139a27854b upstream.
when using __drm_kunit_helper_alloc_drm_device() the driver may be
dereferenced by device-managed resources up until the device is
freed, which is typically later than the kunit-managed resource code
frees it. Fix this by simply make the driver device-managed as well.
In short, the sequence leading to the UAF is as follows:
INIT:
Code allocates a struct device as a kunit-managed resource.
Code allocates a drm driver as a kunit-managed resource.
Code allocates a drm device as a device-managed resource.
EXIT:
Kunit resource cleanup frees the drm driver
Kunit resource cleanup puts the struct device, which starts a
device-managed resource cleanup
device-managed cleanup calls drm_dev_put()
drm_dev_put() dereferences the (now freed) drm driver -> Boom.
Related KASAN message:
[55272.551542] ==================================================================
[55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353
[55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155
[55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021
[55272.551626] Call Trace:
[55272.551629] <TASK>
[55272.551633] dump_stack_lvl+0x57/0x90
[55272.551639] print_report+0xcf/0x630
[55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70
[55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551694] kasan_report+0xd7/0x110
[55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551783] devres_release_all+0x15d/0x1f0
[55272.551790] ? __pfx_devres_release_all+0x10/0x10
[55272.551797] device_unbind_cleanup+0x16/0x1a0
[55272.551802] device_release_driver_internal+0x3e5/0x540
[55272.551808] ? kobject_put+0x5d/0x4b0
[55272.551814] bus_remove_device+0x1f1/0x3f0
[55272.551819] device_del+0x342/0x910
[55272.551826] ? __pfx_device_del+0x10/0x10
[55272.551830] ? lock_release+0x339/0x5e0
[55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit]
[55272.551845] ? __pfx_lock_release+0x10/0x10
[55272.551851] platform_device_del.part.0+0x1f/0x1e0
[55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60
[55272.551863] kunit_remove_resource+0x195/0x290 [kunit]
[55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60
[55272.551877] kunit_cleanup+0x78/0x120 [kunit]
[55272.551885] ? __kthread_parkme+0xc1/0x1f0
[55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit]
[55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit]
[55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.551919] kthread+0x2e7/0x3c0
[55272.551924] ? __pfx_kthread+0x10/0x10
[55272.551929] ret_from_fork+0x2d/0x70
[55272.551935] ? __pfx_kthread+0x10/0x10
[55272.551940] ret_from_fork_asm+0x1b/0x30
[55272.551948] </TASK>
[55272.551953] Allocated by task 10351:
[55272.551956] kasan_save_stack+0x1c/0x40
[55272.551962] kasan_set_track+0x21/0x30
[55272.551966] __kasan_kmalloc+0x8b/0x90
[55272.551970] __kmalloc+0x5e/0x160
[55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit]
[55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test]
[55272.551991] kunit_try_run_case+0xdd/0x250 [kunit]
[55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.552008] kthread+0x2e7/0x3c0
[55272.552012] ret_from_fork+0x2d/0x70
[55272.552017] ret_from_fork_asm+0x1b/0x30
[55272.552024] Freed by task 10353:
[55272.552027] kasan_save_stack+0x1c/0x40
[55272.552032] kasan_set_track+0x21/0x30
[55272.552036] kasan_save_free_info+0x27/0x40
[55272.552041] __kasan_slab_free+0x106/0x180
[55272.552046] slab_free_freelist_hook+0xb3/0x160
[55272.552051] __kmem_cache_free+0xb2/0x290
[55272.552056] kunit_remove_resource+0x195/0x290 [kunit]
[55272.552064] kunit_cleanup+0x78/0x120 [kunit]
[55272.552072] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.552080] kthread+0x2e7/0x3c0
[55272.552085] ret_from_fork+0x2d/0x70
[55272.552089] ret_from_fork_asm+0x1b/0x30
[55272.552096] The buggy address belongs to the object at ffff888127502800
which belongs to the cache kmalloc-512 of size 512
[55272.552105] The buggy address is located 40 bytes inside of
freed 512-byte region [ffff888127502800, ffff888127502a00)
[55272.552115] The buggy address belongs to the physical page:
[55272.552119] page:00000000af6c70ff refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127500
[55272.552127] head:00000000af6c70ff order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[55272.552133] anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
[55272.552141] page_type: 0xffffffff()
[55272.552145] raw: 0017ffffc0010200 ffff888100042c80 0000000000000000 dead000000000001
[55272.552152] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[55272.552157] page dumped because: kasan: bad access detected
[55272.552163] Memory state around the buggy address:
[55272.552167] ffff888127502700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[55272.552173] ffff888127502780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[55272.552178] >ffff888127502800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552184] ^
[55272.552187] ffff888127502880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552193] ffff888127502900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552198] ==================================================================
[55272.552203] Disabling lock debugging due to kernel taint
v2:
- Update commit message, add Fixes: tag and Cc stable.
v3:
- Further commit message updates (Maxime Ripard).
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v6.3+
Fixes: d987803107 ("drm/tests: helpers: Allow to pass a custom drm_driver")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230907135339.7971-2-thomas.hellstrom@linux.intel.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit edcfe22985 upstream.
Heavy-weight TLB flush is required after unmap on all GPUs for
correctness and security.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c95ec3b59 upstream.
Apparently Acer Chromebook C740 (BDW-ULT) doesn't have the
eDP HPD line properly connected, and thus fails the new
HPD check during eDP probe. The result is that we lose the
eDP output.
I suspect all such machines would be Chromebooks or other
Linux exclusive systems as the Windows driver likely wouldn't
work either. I did check a few other BDW machines here and
those do have eDP HPD connected, one of them even is a
different Chromebook (Samus).
To account for these funky machines let's skip the HPD check when
it looks like the eDP port is the only one using that specific AUX
channel. In case of multiple ports sharing the same AUX CH (eg. on
Asrock B250M-HDV) we still do the check and thus should correctly
ignore the eDP port in favor of the other DP port (usually a DP->VGA
converter).
v2: Don't oops during list iteration
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9264
Fixes: cfe5bdfb27 ("drm/i915: Check HPD live state during eDP probe")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230908052527.685-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
(cherry picked from commit 70052100fa)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dcbad72751 upstream.
Commit 254986e324 ("drm/radeon: Use the drm suballocation manager implementation.")
made the fence wait in amdgpu_sa_bo_new() interruptible but there is no
code to handle an interrupt. This caused the kernel to randomly explode
in high-VRAM-pressure situations so make it uninterruptible again.
Fixes: 254986e324 ("drm/radeon: Use the drm suballocation manager implementation.")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2769
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org # 6.4+
CC: Simon Pilkington <simonp.git@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906195517.1345717-1-alexander.deucher@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fda67e8c3 upstream.
With the configuration PAGE_SIZE 64k and filesystem blocksize 64k,
a problem occurred when more than 13 million files were directly created
under a directory:
EXT4-fs error (device xx): ext4_dx_csum_set:492: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): ext4_dx_csum_verify:463: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): dx_probe:856: inode #xxxx: block 8188: comm xxxxx: Directory index failed checksum
When enough files are created, the fake_dirent->reclen will be 0xffff.
it doesn't equal to the blocksize 65536, i.e. 0x10000.
But it is not the same condition when blocksize equals to 4k.
when enough files are created, the fake_dirent->reclen will be 0x1000.
it equals to the blocksize 4k, i.e. 0x1000.
The problem seems to be related to the limitation of the 16-bit field
when the blocksize is set to 64k.
To address this, helpers like ext4_rec_len_{from,to}_disk has already
been introduced to complete the conversion between the encoded and the
plain form of rec_len.
So fix this one by using the helper, and all the other in this file too.
Cc: stable@kernel.org
Fixes: dbe8944404 ("ext4: Calculate and verify checksums for htree nodes")
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20230803060938.1929759-1-zhangshida@kylinos.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98a1581663 upstream.
This reverts commit b5c75b68b7.
The commit makes it impossible to select configuration options that
depend on COMEDI_8254, COMEDI_DAS08, COMEDI_NI_LABPC, or
COMEDI_AMPLC_DIO200 options due to changing 'select' directives to
'depends on' directives and there being no other way to select those
codependent configuration options.
Fixes: b5c75b68b7 ("comedi: add HAS_IOPORT dependencies")
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: <stable@vger.kernel.org> # v6.5+
Acked-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230905090922.3314-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c91774818b upstream.
The function pm8001_pci_resume() only calls pm8001_request_irq() without
calling pm8001_setup_irq(). This causes the IRQ allocation to fail, which
leads all drives being removed from the system.
Fix this issue by integrating the code for pm8001_setup_irq() directly
inside pm8001_request_irq() so that MSI-X setup is performed both during
normal initialization and resume operations.
Fixes: dbf9bfe615 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-2-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b0747d507 upstream.
The following processes run into a deadlock. CPU 41 was waiting for CPU 29
to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29
was hung by that spinlock with IRQs disabled.
PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd"
!# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0
!# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0
!# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0
# 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0
# 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0
# 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0
# 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0
# 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0
# 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0
# 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0
#10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0
#11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0
#12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0
#13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0
#14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0
#15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0
#16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0
#17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0
#18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0
#19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
#20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
#21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
#22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
#23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0
PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd"
!# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0
!# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0
# 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0
# 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0
# 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0
# 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0
# 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0
# 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0
# 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0
# 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
#10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
#11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
#12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
#13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
#14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
#15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
#16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
#17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0
The lock is used to synchronize different sysfs operations, it doesn't
protect any resource that will be touched by an interrupt. Consequently
it's not required to disable IRQs. Replace the spinlock with a mutex to fix
the deadlock.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 737dd811a3 upstream.
When a CRC error occurs, the HBA asserts an interrupt to indicate an
interface fatal error (PxIS.IFS). The ISR clears PxIE and PxIS, then
does error recovery. If the adapter receives another SDB FIS
with an error (PxIS.TFES) from the device before the start of the EH
recovery process, the interrupt signaling the new SDB cannot be
serviced as PxIE was cleared already. This in turn results in the HBA
inability to issue any command during the error recovery process after
setting PxCMD.ST to 1 because PxIS.TFES is still set.
According to AHCI 1.3.1 specifications section 6.2.2, fatal errors
notified by setting PxIS.HBFS, PxIS.HBDS, PxIS.IFS or PxIS.TFES will
cause the HBA to enter the ERR:Fatal state. In this state, the HBA
shall not issue any new commands.
To avoid this situation, introduce the function
ahci_port_clear_pending_irq() to clear pending interrupts before
executing a COMRESET. This follows the AHCI 1.3.1 - section 6.2.2.2
specification.
Signed-off-by: Szuying Chen <Chloe_Chen@asmedia.com.tw>
Fixes: e0bfd14997 ("[PATCH] ahci: stop engine during hard reset")
Cc: stable@vger.kernel.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24e0e61db3 upstream.
In AHCI 1.3.1, the register description for CAP.SSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Slumber state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Slumber requests."
In AHCI 1.3.1, the register description for CAP.PSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Partial state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Partial requests."
Ensure that we always set the corresponding bits in PxSCTL.IPM, such that
a device is not allowed to initiate transitions to power states which are
unsupported by the HBA.
DevSleep is always initiated by the HBA, however, for completeness, set the
corresponding bit in PxSCTL.IPM such that agressive link power management
cannot transition to DevSleep if DevSleep is not supported.
sata_link_scr_lpm() is used by libahci, ata_piix and libata-pmp.
However, only libahci has the ability to read the CAP/CAP2 register to see
if these features are supported. Therefore, in order to not introduce any
regressions on ata_piix or libata-pmp, create flags that indicate that the
respective feature is NOT supported. This way, the behavior for ata_piix
and libata-pmp should remain unchanged.
This change is based on a patch originally submitted by Runa Guo-oc.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Fixes: 1152b2617a ("libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fee465150b upstream.
Reset the i2c controller when an i2c transfer timeout occurs.
The remaining interrupts and device should be reset to avoid
unpredictable controller behavior.
Fixes: 2e57b7cebb ("i2c: aspeed: Add multi-master use case support")
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51aab5ffce upstream.
The function tracefs_create_dir() was missing a lockdown check and was
called by the RV code. This gave an inconsistent behavior of this function
returning success while other tracefs functions failed. This caused the
inode being freed by the wrong kmem_cache.
Link: https://lkml.kernel.org/r/20230905182711.692687042@goodmis.org
Link: https://lore.kernel.org/all/202309050916.58201dc6-oliver.sang@intel.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Fixes: bf8e602186 ("tracing: Do not create tracefs files if tracefs lockdown is in effect")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdd2630a73 upstream.
nfsd sends the transposed directory change info in the RENAME reply. The
source directory is in save_fh and the target is in current_fh.
Reported-by: Zhi Li <yieli@redhat.com>
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2218844
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccf1dab96b upstream.
selinux_set_mnt_opts() relies on the fact that the mount options pointer
is always NULL when all options are unset (specifically in its
!selinux_initialized() branch. However, the new
selinux_fs_context_submount() hook breaks this rule by allocating a new
structure even if no options are set. That causes any submount created
before a SELinux policy is loaded to be rejected in
selinux_set_mnt_opts().
Fix this by making selinux_fs_context_submount() leave fc->security
set to NULL when there are no options to be copied from the reference
superblock.
Cc: <stable@vger.kernel.org>
Reported-by: Adam Williamson <awilliam@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2236345
Fixes: d80a8f1b58 ("vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e2cfbd2d3 upstream.
The option files update the options for a given trace array. For an
instance, if the file is opened and the instance is deleted, reading or
writing to the file will cause a use after free.
Up the ref count of the trace_array when an option file is opened.
Link: https://lkml.kernel.org/r/20230907024804.086679464@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes: 8530dec63e ("tracing: Add tracing_check_open_get_tr()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b37febc57 upstream.
The current_trace updates the trace array tracer. For an instance, if the
file is opened and the instance is deleted, reading or writing to the file
will cause a use after free.
Up the ref count of the trace array when current_trace is opened.
Link: https://lkml.kernel.org/r/20230907024803.877687227@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes: 8530dec63e ("tracing: Add tracing_check_open_get_tr()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5ca233e2e upstream.
When the trace event enable and filter files are opened, increment the
trace array ref counter, otherwise they can be accessed when the trace
array is being deleted. The ref counter keeps the trace array from being
deleted while those files are opened.
Link: https://lkml.kernel.org/r/20230907024803.456187066@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8530dec63e ("tracing: Add tracing_check_open_get_tr()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62663b8496 upstream.
The synth traces incorrectly print pointer to the synthetic event values
instead of the actual value when using u64 type. Fix by addressing the
contents of the union properly.
Link: https://lore.kernel.org/linux-trace-kernel/20230911141704.3585965-1-tero.kristo@linux.intel.com
Fixes: ddeea494a1 ("tracing/synthetic: Use union instead of casts")
Cc: stable@vger.kernel.org
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5c624f027 upstream.
The event inject files add events for a specific trace array. For an
instance, if the file is opened and the instance is deleted, reading or
writing to the file will cause a use after free.
Up the ref count of the trace_array when a event inject file is opened.
Link: https://lkml.kernel.org/r/20230907024804.292337868@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes: 6c3edaf9fd ("tracing: Introduce trace event injection")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d660c9b2b upstream.
The tracing_max_latency file points to the trace_array max_latency field.
For an instance, if the file is opened and the instance is deleted,
reading or writing to the file will cause a use after free.
Up the ref count of the trace_array when tracing_max_latency is opened.
Link: https://lkml.kernel.org/r/20230907024803.666889383@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes: 8530dec63e ("tracing: Add tracing_check_open_get_tr()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc52a64416 upstream.
To make handling BIG and LITTLE endian better the offset/len of dynamic
fields of the synthetic events was changed into a structure of:
struct trace_dynamic_info {
#ifdef CONFIG_CPU_BIG_ENDIAN
u16 offset;
u16 len;
#else
u16 len;
u16 offset;
#endif
};
to replace the manual changes of:
data_offset = offset & 0xffff;
data_offest = len << 16;
But if you look closely, the above is:
<len> << 16 | offset
Which in little endian would be in memory:
offset_lo offset_hi len_lo len_hi
and in big endian:
len_hi len_lo offset_hi offset_lo
Which if broken into a structure would be:
struct trace_dynamic_info {
#ifdef CONFIG_CPU_BIG_ENDIAN
u16 len;
u16 offset;
#else
u16 offset;
u16 len;
#endif
};
Which is the opposite of what was defined.
Fix this and just to be safe also add "__packed".
Link: https://lore.kernel.org/all/20230908154417.5172e343@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230908163929.2c25f3dc@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: ddeea494a1 ("tracing/synthetic: Use union instead of casts")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ca8e03cf2 upstream.
If we do fast tree logging we increment a counter on the current
transaction for every ordered extent we need to wait for. This means we
expect the transaction to still be there when we clear pending on the
ordered extent. However if we happen to abort the transaction and clean
it up, there could be no running transaction, and thus we'll trip the
"ASSERT(trans)" check. This is obviously incorrect, and the code
properly deals with the case that the transaction doesn't exist. Fix
this ASSERT() to only fire if there's no trans and we don't have
BTRFS_FS_ERROR() set on the file system.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee34a82e89 upstream.
During the ino lookup ioctl we can end up calling btrfs_iget() to get an
inode reference while we are holding on a root's btree. If btrfs_iget()
needs to lookup the inode from the root's btree, because it's not
currently loaded in memory, then it will need to lock another or the
same path in the same root btree. This may result in a deadlock and
trigger the following lockdep splat:
WARNING: possible circular locking dependency detected
6.5.0-rc7-syzkaller-00004-gf7757129e3de #0 Not tainted
------------------------------------------------------
syz-executor277/5012 is trying to acquire lock:
ffff88802df41710 (btrfs-tree-01){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
but task is already holding lock:
ffff88802df418e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (btrfs-tree-00){++++}-{3:3}:
down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645
__btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
btrfs_search_slot+0x13a4/0x2f80 fs/btrfs/ctree.c:2302
btrfs_init_root_free_objectid+0x148/0x320 fs/btrfs/disk-io.c:4955
btrfs_init_fs_root fs/btrfs/disk-io.c:1128 [inline]
btrfs_get_root_ref+0x5ae/0xae0 fs/btrfs/disk-io.c:1338
btrfs_get_fs_root fs/btrfs/disk-io.c:1390 [inline]
open_ctree+0x29c8/0x3030 fs/btrfs/disk-io.c:3494
btrfs_fill_super+0x1c7/0x2f0 fs/btrfs/super.c:1154
btrfs_mount_root+0x7e0/0x910 fs/btrfs/super.c:1519
legacy_get_tree+0xef/0x190 fs/fs_context.c:611
vfs_get_tree+0x8c/0x270 fs/super.c:1519
fc_mount fs/namespace.c:1112 [inline]
vfs_kern_mount+0xbc/0x150 fs/namespace.c:1142
btrfs_mount+0x39f/0xb50 fs/btrfs/super.c:1579
legacy_get_tree+0xef/0x190 fs/fs_context.c:611
vfs_get_tree+0x8c/0x270 fs/super.c:1519
do_new_mount+0x28f/0xae0 fs/namespace.c:3335
do_mount fs/namespace.c:3675 [inline]
__do_sys_mount fs/namespace.c:3884 [inline]
__se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (btrfs-tree-01){++++}-{3:3}:
check_prev_add kernel/locking/lockdep.c:3142 [inline]
check_prevs_add kernel/locking/lockdep.c:3261 [inline]
validate_chain kernel/locking/lockdep.c:3876 [inline]
__lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144
lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761
down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645
__btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
btrfs_tree_read_lock fs/btrfs/locking.c:142 [inline]
btrfs_read_lock_root_node+0x292/0x3c0 fs/btrfs/locking.c:281
btrfs_search_slot_get_root fs/btrfs/ctree.c:1832 [inline]
btrfs_search_slot+0x4ff/0x2f80 fs/btrfs/ctree.c:2154
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:412
btrfs_read_locked_inode fs/btrfs/inode.c:3892 [inline]
btrfs_iget_path+0x2d9/0x1520 fs/btrfs/inode.c:5716
btrfs_search_path_in_tree_user fs/btrfs/ioctl.c:1961 [inline]
btrfs_ioctl_ino_lookup_user+0x77a/0xf50 fs/btrfs/ioctl.c:2105
btrfs_ioctl+0xb0b/0xd40 fs/btrfs/ioctl.c:4683
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(btrfs-tree-00);
lock(btrfs-tree-01);
lock(btrfs-tree-00);
rlock(btrfs-tree-01);
*** DEADLOCK ***
1 lock held by syz-executor277/5012:
#0: ffff88802df418e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
stack backtrace:
CPU: 1 PID: 5012 Comm: syz-executor277 Not tainted 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
check_noncircular+0x375/0x4a0 kernel/locking/lockdep.c:2195
check_prev_add kernel/locking/lockdep.c:3142 [inline]
check_prevs_add kernel/locking/lockdep.c:3261 [inline]
validate_chain kernel/locking/lockdep.c:3876 [inline]
__lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144
lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761
down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645
__btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
btrfs_tree_read_lock fs/btrfs/locking.c:142 [inline]
btrfs_read_lock_root_node+0x292/0x3c0 fs/btrfs/locking.c:281
btrfs_search_slot_get_root fs/btrfs/ctree.c:1832 [inline]
btrfs_search_slot+0x4ff/0x2f80 fs/btrfs/ctree.c:2154
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:412
btrfs_read_locked_inode fs/btrfs/inode.c:3892 [inline]
btrfs_iget_path+0x2d9/0x1520 fs/btrfs/inode.c:5716
btrfs_search_path_in_tree_user fs/btrfs/ioctl.c:1961 [inline]
btrfs_ioctl_ino_lookup_user+0x77a/0xf50 fs/btrfs/ioctl.c:2105
btrfs_ioctl+0xb0b/0xd40 fs/btrfs/ioctl.c:4683
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f0bec94ea39
Fix this simply by releasing the path before calling btrfs_iget() as at
point we don't need the path anymore.
Reported-by: syzbot+bf66ad948981797d2f1d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000045fa140603c4a969@google.com/
Fixes: 23d0b79dfa ("btrfs: Add unprivileged version of ino_lookup ioctl")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d6cd791e6 upstream.
Commit 675dfe1223 ("btrfs: fix block group item corruption after
inserting new block group") fixed one race that resulted in not persisting
a block group's item when its "used" bytes field decreases to zero.
However there's another race that can happen in a much shorter time window
that results in the same problem. The following sequence of steps explains
how it can happen:
1) Task A creates a metadata block group X, its "used" and "commit_used"
fields are initialized to 0;
2) Two extents are allocated from block group X, so its "used" field is
updated to 32K, and its "commit_used" field remains as 0;
3) Transaction commit starts, by some task B, and it enters
btrfs_start_dirty_block_groups(). There it tries to update the block
group item for block group X, which currently has its "used" field with
a value of 32K and its "commit_used" field with a value of 0. However
that fails since the block group item was not yet inserted, so at
update_block_group_item(), the btrfs_search_slot() call returns 1, and
then we set 'ret' to -ENOENT. Before jumping to the label 'fail'...
4) The block group item is inserted by task A, when for example
btrfs_create_pending_block_groups() is called when releasing its
transaction handle. This results in insert_block_group_item() inserting
the block group item in the extent tree (or block group tree), with a
"used" field having a value of 32K and setting "commit_used", in struct
btrfs_block_group, to the same value (32K);
5) Task B jumps to the 'fail' label and then resets the "commit_used"
field to 0. At btrfs_start_dirty_block_groups(), because -ENOENT was
returned from update_block_group_item(), we add the block group again
to the list of dirty block groups, so that we will try again in the
critical section of the transaction commit when calling
btrfs_write_dirty_block_groups();
6) Later the two extents from block group X are freed, so its "used" field
becomes 0;
7) If no more extents are allocated from block group X before we get into
btrfs_write_dirty_block_groups(), then when we call
update_block_group_item() again for block group X, we will not update
the block group item to reflect that it has 0 bytes used, because the
"used" and "commit_used" fields in struct btrfs_block_group have the
same value, a value of 0.
As a result after committing the transaction we have an empty block
group with its block group item having a 32K value for its "used" field.
This will trigger errors from fsck ("btrfs check" command) and after
mounting again the fs, the cleaner kthread will not automatically delete
the empty block group, since its "used" field is not 0. Possibly there
are other issues due to this inconsistency.
When this issue happens, the error reported by fsck is like this:
[1/7] checking root items
[2/7] checking extents
block group [1104150528 1073741824] used 39796736 but extent items used 0
ERROR: errors found in extent allocation tree or chunk allocation
(...)
So fix this by not resetting the "commit_used" field of a block group when
we don't find the block group item at update_block_group_item().
Fixes: 7248e0cebb ("btrfs: skip update of block group item if used bytes are the same")
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e0e879926 upstream.
[BUG]
After commit 72a69cd030 ("btrfs: subpage: pack all subpage bitmaps
into a larger bitmap"), the DEBUG section of btree_dirty_folio() would
no longer compile.
[CAUSE]
If DEBUG is defined, we would do extra checks for btree_dirty_folio(),
mostly to make sure the range we marked dirty has an extent buffer and
that extent buffer is dirty.
For subpage, we need to iterate through all the extent buffers covered
by that page range, and make sure they all matches the criteria.
However commit 72a69cd030 ("btrfs: subpage: pack all subpage bitmaps
into a larger bitmap") changes how we store the bitmap, we pack all the
16 bits bitmaps into a larger bitmap, which would save some space.
This means we no longer have btrfs_subpage::dirty_bitmap, instead the
dirty bitmap is starting at btrfs_subpage_info::dirty_offset, and has a
length of btrfs_subpage_info::bitmap_nr_bits.
[FIX]
Although I'm not sure if it still makes sense to maintain such code, at
least let it compile.
This patch would let us test the bits one by one through the bitmaps.
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6007dce0c upstream.
There's a race condition in the multipath target when retrieve_deps
races with multipath_message calling dm_get_device and dm_put_device.
retrieve_deps walks the list of open devices without holding any lock
but multipath may add or remove devices to the list while it is
running. The end result may be memory corruption or use-after-free
memory access.
See this description of a UAF with multipath_message():
https://listman.redhat.com/archives/dm-devel/2022-October/052373.html
Fix this bug by introducing a new rw semaphore "devices_lock". We grab
devices_lock for read in retrieve_deps and we grab it for write in
dm_get_device and dm_put_device.
Reported-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9ce385344 upstream.
dm looks up the table for IO based on the request type, with an
assumption that if the request is marked REQ_NOWAIT, it's fine to
attempt to submit that IO while under RCU read lock protection. This
is not OK, as REQ_NOWAIT just means that we should not be sleeping
waiting on other IO, it does not mean that we can't potentially
schedule.
A simple test case demonstrates this quite nicely:
int main(int argc, char *argv[])
{
struct iovec iov;
int fd;
fd = open("/dev/dm-0", O_RDONLY | O_DIRECT);
posix_memalign(&iov.iov_base, 4096, 4096);
iov.iov_len = 4096;
preadv2(fd, &iov, 1, 0, RWF_NOWAIT);
return 0;
}
which will instantly spew:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5580, name: dm-nowait
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
INFO: lockdep is turned off.
CPU: 7 PID: 5580 Comm: dm-nowait Not tainted 6.6.0-rc1-g39956d2dcd81 #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x11d/0x1b0
__might_resched+0x3c3/0x5e0
? preempt_count_sub+0x150/0x150
mempool_alloc+0x1e2/0x390
? mempool_resize+0x7d0/0x7d0
? lock_sync+0x190/0x190
? lock_release+0x4b7/0x670
? internal_get_user_pages_fast+0x868/0x2d40
bio_alloc_bioset+0x417/0x8c0
? bvec_alloc+0x200/0x200
? internal_get_user_pages_fast+0xb8c/0x2d40
bio_alloc_clone+0x53/0x100
dm_submit_bio+0x27f/0x1a20
? lock_release+0x4b7/0x670
? blk_try_enter_queue+0x1a0/0x4d0
? dm_dax_direct_access+0x260/0x260
? rcu_is_watching+0x12/0xb0
? blk_try_enter_queue+0x1cc/0x4d0
__submit_bio+0x239/0x310
? __bio_queue_enter+0x700/0x700
? kvm_clock_get_cycles+0x40/0x60
? ktime_get+0x285/0x470
submit_bio_noacct_nocheck+0x4d9/0xb80
? should_fail_request+0x80/0x80
? preempt_count_sub+0x150/0x150
? lock_release+0x4b7/0x670
? __bio_add_page+0x143/0x2d0
? iov_iter_revert+0x27/0x360
submit_bio_noacct+0x53e/0x1b30
submit_bio_wait+0x10a/0x230
? submit_bio_wait_endio+0x40/0x40
__blkdev_direct_IO_simple+0x4f8/0x780
? blkdev_bio_end_io+0x4c0/0x4c0
? stack_trace_save+0x90/0xc0
? __bio_clone+0x3c0/0x3c0
? lock_release+0x4b7/0x670
? lock_sync+0x190/0x190
? atime_needs_update+0x3bf/0x7e0
? timestamp_truncate+0x21b/0x2d0
? inode_owner_or_capable+0x240/0x240
blkdev_direct_IO.part.0+0x84a/0x1810
? rcu_is_watching+0x12/0xb0
? lock_release+0x4b7/0x670
? blkdev_read_iter+0x40d/0x530
? reacquire_held_locks+0x4e0/0x4e0
? __blkdev_direct_IO_simple+0x780/0x780
? rcu_is_watching+0x12/0xb0
? __mark_inode_dirty+0x297/0xd50
? preempt_count_add+0x72/0x140
blkdev_read_iter+0x2a4/0x530
do_iter_readv_writev+0x2f2/0x3c0
? generic_copy_file_range+0x1d0/0x1d0
? fsnotify_perm.part.0+0x25d/0x630
? security_file_permission+0xd8/0x100
do_iter_read+0x31b/0x880
? import_iovec+0x10b/0x140
vfs_readv+0x12d/0x1a0
? vfs_iter_read+0xb0/0xb0
? rcu_is_watching+0x12/0xb0
? rcu_is_watching+0x12/0xb0
? lock_release+0x4b7/0x670
do_preadv+0x1b3/0x260
? do_readv+0x370/0x370
__x64_sys_preadv2+0xef/0x150
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5af41ad806
Code: 41 54 41 89 fc 55 44 89 c5 53 48 89 cb 48 83 ec 18 80 3d e4 dd 0d 00 00 74 7a 45 89 c1 49 89 ca 45 31 c0 b8 47 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 be 00 00 00 48 85 c0 79 4a 48 8b 0d da 55
RSP: 002b:00007ffd3145c7f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000147
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5af41ad806
RDX: 0000000000000001 RSI: 00007ffd3145c850 RDI: 0000000000000003
RBP: 0000000000000008 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ffd3145c850 R14: 000055f5f0431dd8 R15: 0000000000000001
</TASK>
where in fact it is dm itself that attempts to allocate a bio clone with
GFP_NOIO under the rcu read lock, regardless of the request type.
Fix this by getting rid of the special casing for REQ_NOWAIT, and just
use the normal SRCU protected table lookup. Get rid of the bio based
table locking helpers at the same time, as they are now unused.
Cc: stable@vger.kernel.org
Fixes: 563a225c9f ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 169ed4ece8 upstream.
This reverts commit 70e64c4d52.
Since, we now have an actual fix for this issue, we can get rid of this
workaround as it can cause pin failures if enough VRAM isn't carved out
by the BIOS.
Cc: stable@vger.kernel.org # 6.1+
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2884fe84a upstream.
Commit c103a23f2f
("drm/amd: Convert amdgpu to use suballocation helper.")
made the fence wait in amdgpu_sa_bo_new() interruptible but there is no
code to handle an interrupt. This caused the kernel to randomly explode
in high-VRAM-pressure situations so make it uninterruptible again.
Signed-off-by: Simon Pilkington <simonp.git@gmail.com>
Fixes: c103a23f2f ("drm/amd: Convert amdgpu to use suballocation helper.")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2761
CC: stable@vger.kernel.org # 6.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
