According to the documentation of the sysfs nodes rb_noti_cnt,
rb_active_cnt and rb_inactive_cnt, these are all related to HPB
recommendation in UPIU response packet. 'rcmd' (recommendation) should be
the correct abbreviation.
Change the sysfs documentation about these sysfs nodes to highlight what
they mean under different HPB control modes.
Link: https://lore.kernel.org/r/20220505134707.35929-5-huobean@gmail.com
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
"When the device is powered off by the host, the device may restore L2P map
data upon power up or build from the host's HPB READ command. In case
device powered up and lost HPB information, device can signal to the host
through HPB Sense data, by setting HPB Operation as '2' which will inform
the host that device reset HPB information."
Clean up the handler and make the intent of this handler more readable, no
functional change.
Link: https://lore.kernel.org/r/20220505134707.35929-4-huobean@gmail.com
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the first enumerator has no initializer, the value of the corresponding
constant is zero.
Link: https://lore.kernel.org/r/20220505134707.35929-3-huobean@gmail.com
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no functional change in this patch, just merge ufshpb_reset() and
ufshpb_reset_host() into one function ufshpb_toggle_state().
Link: https://lore.kernel.org/r/20220505134707.35929-2-huobean@gmail.com
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In order to allow the block devices to enter autosuspend mode during
runtime, thereby allowing the ufshcd host driver to also runtime suspend,
let's make use of the RPM_AUTOSUSPEND flag.
Without this flag, userspace needs to enable the autosuspend feature of
the block devices through sysfs.
Link: https://lore.kernel.org/r/20220504084212.11605-6-manivannan.sadhasivam@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The wmb() inside ufshcd_send_command() is added to make sure that the
doorbell is committed immediately. This leads to couple of expectations:
1. The doorbell write should complete before the function return.
2. The doorbell write should not cross the function boundary.
2nd expectation is fullfilled by the Linux memory model as there is a
guarantee that the critical section won't cross the unlock (release)
operation.
1st expectation is not really needed here as there is no following read/
write that depends on the doorbell to be complete implicitly. Even if the
doorbell write is in a CPUs Write Buffer (WB), wmb() won't flush it. And
there is no real need of a WB flush here as well.
So let's get rid of the wmb() that seems redundant.
Link: https://lore.kernel.org/r/20220504084212.11605-5-manivannan.sadhasivam@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In ufs_qcom_dev_ref_clk_ctrl(), it was noted that the ref_clk needs to be
stable for at least 1us. Even though there is wmb() to make sure the write
gets "completed", there is no guarantee that the write actually reached the
UFS device. There is a good chance that the write could be stored in a
Write Buffer (WB). In that case, even though the CPU waits for 1us, the
ref_clk might not be stable for that period.
So lets do a readl() to make sure that the previous write has reached the
UFS device before udelay().
Also, the wmb() after writel_relaxed() is not really needed. Both writel()
and readl() are ordered on all architectures and the CPU won't speculate
instructions after readl() due to the in-built control dependency with read
value on weakly ordered architectures. So it can be safely removed.
Link: https://lore.kernel.org/r/20220504084212.11605-4-manivannan.sadhasivam@linaro.org
Fixes: f06fcc7155 ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Cc: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no need to call devm_phy_get() if ACPI is used, so skip it. The
host->generic_phy pointer should already be NULL due to the kzalloc(), so
no need to set it NULL again.
While at it, also remove the comment that has no relationship with
devm_phy_get().
Link: https://lore.kernel.org/r/20220504084212.11605-3-manivannan.sadhasivam@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On Qcom UFS platforms, the reset control line seems to be optional (for
SoCs like MSM8996 and probably for others too). The current logic tries to
mimic the devm_reset_control_get_optional() API but it also continues the
probe if there is an error with the declared reset line in DT/ACPI.
In an ideal case, if the reset line is not declared in DT/ACPI, the probe
should continue. But if there is problem in acquiring the declared reset
line (like EPROBE_DEFER) it should fail and return the appropriate error
code.
Link: https://lore.kernel.org/r/20220504084212.11605-2-manivannan.sadhasivam@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If we fail to notify the phy up event then undo the RPM resume, as the phy
up notify event handling pairs with that RPM resume.
Link: https://lore.kernel.org/r/1651839939-101188-1-git-send-email-john.garry@huawei.com
Reported-by: Yihang Li <liyihang6@hisilicon.com>
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for management applications to send an MPI3 Encapsulated NVMe
passthru command to the NVMe devices attached to an Avenger controller.
Since the NVMe drives are exposed as SCSI devices by the controller, the
standard NVMe applications cannot be used to interact with the drives and
the command sets supported are also limited by the controller firmware.
Special handling is required for MPI3 Encapsulated NVMe passthru commands
for PRP/SGL setup in the commands.
Link: https://lore.kernel.org/r/20220429211641.642010-8-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement driver support for management applications to enable persistent
event log (PEL) notifications. Upon receipt of events, the driver will
increment a sysfs variable named event_counter. The management application
will poll for event_counter value changes and signal the application about
events.
Link: https://lore.kernel.org/r/20220429211641.642010-6-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are certain management commands which require firmware intervention.
These commands are termed MPT commands. Add support for them.
Link: https://lore.kernel.org/r/20220429211641.642010-5-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch moves the data structures/definitions which are used by
userspace applications from MPI headers to uapi/scsi/scsi_bsg_mpi3mr.h
Link: https://lore.kernel.org/r/20220429211641.642010-4-sumit.saxena@broadcom.com
Reported by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are certain bsg commands which need to be completed by the driver
without involving firmware. These requests are termed driver commands. Add
support for these.
Link: https://lore.kernel.org/r/20220429211641.642010-3-sumit.saxena@broadcom.com
Reported by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create bsg device per controller for controller management purposes.
bsg device nodes will be named /dev/bsg/mpi3mrctl0, /dev/bsg/mpi3mrctl1,
etc.
Link: https://lore.kernel.org/r/20220429211641.642010-2-sumit.saxena@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function get_capabilities() has the possibility of failing to allocate
the transfer buffer but it does not currently handle this. This may lead to
exceptions when accessing the buffer.
Add error handling when memory allocation fails.
Link: https://lore.kernel.org/r/20220427025647.298358-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When tcmu_vma_fault() gets a page successfully, before the current context
completes page fault procedure, find_free_blocks() may run and call
unmap_mapping_range() to unmap the page. Assume that when
find_free_blocks() initially completes and the previous page fault
procedure starts to run again and completes, then one truncated page has
been mapped to userspace. But note that tcmu_vma_fault() has gotten a
refcount for the page so any other subsystem won't be able to use the page
unless the userspace address is unmapped later.
If another command subsequently runs and needs to extend dbi_thresh it may
reuse the corresponding slot for the previous page in data_bitmap. Then
though we'll allocate new page for this slot in data_area, no page fault
will happen because we have a valid map and the real request's data will be
lost.
Filesystem implementations will also run into this issue but they usually
lock the page when vm_operations_struct->fault gets a page and unlock the
page after finish_fault() completes. For truncate filesystems lock pages in
truncate_inode_pages() to protect against racing wrt. page faults.
To fix this possible data corruption scenario we can apply a method similar
to the filesystems. For pages that are to be freed, tcmu_blocks_release()
locks and unlocks. Make tcmu_vma_fault() also lock found page under
cmdr_lock. At the same time, since tcmu_vma_fault() gets an extra page
refcount, tcmu_blocks_release() won't free pages if pages are in page fault
procedure, which means it is safe to call tcmu_blocks_release() before
unmap_mapping_range().
With these changes tcmu_blocks_release() will wait for all page faults to
be completed before calling unmap_mapping_range(). And later, if
unmap_mapping_range() is called, it will ensure stale mappings are removed.
Link: https://lore.kernel.org/r/20220421023735.9018-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prior patch added a call to lpfc_sli_prep_wqe() prior to
lpfc_sli_issue_iocb(). This call should not have been added as prep_wqe is
called within the issue_iocb routine. So it's called twice now.
Remove the redundant prep call.
Link: https://lore.kernel.org/r/20220427222223.57920-1-jsmart2021@gmail.com
Fixes: 31a59f7570 ("scsi: lpfc: SLI path split: Refactor Abort paths")
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Code inspection has found an additional reference is taken in
lpfc_bsg_rport_els(). Results in the ndlp not being freed thus is leaked.
Fix by removing the redundant refcount taken before WQE submission.
Link: https://lore.kernel.org/r/20220427222158.57867-1-jsmart2021@gmail.com
Co-developed-by: Nigel Kirkland <nigel.kirkland@broadcom.com>
Signed-off-by: Nigel Kirkland <nigel.kirkland@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During device discovery we ended up calling revalidate twice and thus
requested the same parameters multiple times. This was originally necessary
due to the request_queue and gendisk needing to be instantiated to
configure the block integrity profile.
Since this dependency no longer exists, reorganize the integrity probing
code so it can be run once at the end of discovery and drop the superfluous
revalidate call. Postponing the registration step involves splitting
sd_read_protection() into two functions, one to read the device protection
type and one to configure the mode of operation.
As part of this cleanup, make the printing code a bit less verbose.
Link: https://lore.kernel.org/r/20220302053559.32147-14-martin.petersen@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit a83da8a450 ("scsi: sd: Optimal I/O size should be a multiple of
physical block size") validated the reported optimal I/O size against the
physical block size to overcome problems with devices reporting nonsensical
transfer sizes.
However, some devices claim conformity to older SCSI versions that predate
the physical block size being reported. Other devices do not report a
physical block size at all. We need to be able to validate the optimal I/O
size on those devices as well.
Many devices report an OPTIMAL TRANSFER LENGTH GRANULARITY in the same VPD
page as the OPTIMAL TRANSFER LENGTH. Use this value to validate the optimal
I/O size. Also check that the reported granularity is a multiple of the
physical block size, if supported.
Link: https://lore.kernel.org/r/33fb522e-4f61-1b76-914f-c9e6a3553c9b@gmail.com
Link: https://lore.kernel.org/r/20220302053559.32147-9-martin.petersen@oracle.com
Reported-by: Bernhard Sulzer <micraft.b@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the VPD pages already provided by the SCSI midlayer. No need to request
them individually in the SCSI disk driver.
Link: https://lore.kernel.org/r/20220302053559.32147-8-martin.petersen@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the ATA Information VPD is now cached at device discovery time it is
no longer necessary to request this page when we configure WRITE SAME.
Instead use the cached information to determine if this disk sits behind a
SCSI-ATA translation layer.
Link: https://lore.kernel.org/r/20220302053559.32147-7-martin.petersen@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Low-level device drivers have had the ability to limit the size of an
INQUIRY for many years. This made sense for a wide variety of legacy
devices. However, we are unnecessarily truncating the INQUIRY response for
many modern devices. This prevents us from consulting fields beyond the
first 36 bytes.
If a device reports that it supports a larger INQUIRY response, and the
device also reports that it implements SPC-4 or newer, allow the larger
INQUIRY to proceed.
Link: https://lore.kernel.org/r/20220302053559.32147-4-martin.petersen@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI disk driver consults VPD pages b0 (Block Limits), b1 (Block Device
Characteristics), and b2 (Logical Block Provisioning). Instead of having
sd.c request these pages every revalidate cycle, cache them along with the
other commonly used VPDs.
Link: https://lore.kernel.org/r/20220302053559.32147-6-martin.petersen@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some devices hang when a buffer size larger than expected is passed in the
ALLOCATION LENGTH field. For REPORT SUPPORTED OPERATION CODES we currently
only request a single command descriptor at a time and therefore the actual
size of the command is known ahead of time. Limit the ALLOCATION LENGTH to
the header size plus the command length of the opcode we are asking about.
Link: https://lore.kernel.org/r/20220302053559.32147-5-martin.petersen@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We currently default to 255 bytes when fetching VPD pages during discovery.
However, we have had a few devices that are known to wedge if the requested
buffer exceeds a certain size. See commit af73623f5f ("[SCSI] sd: Reduce
buffer size for vpd request") which works around one example of this
problem in the SCSI disk driver.
With commit d188b0675b ("scsi: core: Add sysfs attributes for VPD pages
0h and 89h") we now risk triggering the same issue in the generic midlayer
code.
The problem with the ATA VPD page in particular is that the SCSI portion of
the page is trailed by 512 bytes of verbatim ATA Identify Device
information. However, not all controllers actually provide the additional
512 bytes and will lock up if one asks for more than the 64 bytes
containing the SCSI protocol fields.
Instead of picking a new, somewhat arbitrary, number of bytes for the VPD
buffer size, start fetching the 4-byte header for each page. The header
contains the size of the page as far as the device is concerned. We can use
the reported size to specify the correct allocation length when
subsequently fetching the full page.
The header validation is done by a new helper function scsi_get_vpd_size()
and both scsi_get_vpd_page() and scsi_get_vpd_buf() now rely on this to
query the page size.
In addition, scsi_get_vpd_page() is simplified to mirror the logic in
scsi_get_vpd_page(). This involves removing the Supported VPD Pages lookup
prior to attempting to query a page. There does not appear any evidence,
even in the oldest SCSI specs, that this step is required. We already rely
on scsi_get_vpd_page() throughout the stack and this function never
consulted the Supported VPD Pages. Since this has not caused any problems
it should be safe to remove the precondition from scsi_get_vpd_page().
Instrumented runs also revealed that the Supported VPD Pages lookup had
little effect since the device page index often was larger than the
supplied buffer size. As a result, inquiries frequently bypassed the index
check and went through the "If we ran off the end of the buffer, give us
the benefit of the doubt" code path which assumed the page was present
despite not being listed. The revised code takes both the page size
reported by the device as well as the size of the buffer provided by the
scsi_get_vpd_page() caller into account.
Link: https://lore.kernel.org/r/20220302053559.32147-3-martin.petersen@oracle.com
Fixes: d188b0675b ("scsi: core: Add sysfs attributes for VPD pages 0h and 89h")
Reported-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We now cache VPD page 0x89 (ATA Information) so there is no need to request
it from the hardware. Make mpt3sas use the cached page.
Link: https://lore.kernel.org/r/20220302053559.32147-2-martin.petersen@oracle.com
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If no handler is found in lpfc_complete_unsol_iocb() to match the rctl of a
received frame, the frame is dropped and resources are leaked.
Fix by returning resources when discarding an unhandled frame type. Update
lpfc_fc_frame_check() handling of NOP basic link service.
Link: https://lore.kernel.org/r/20220426181419.9154-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Smatch had the following warning:
drivers/scsi/lpfc/lpfc_sli.c:22305 lpfc_sli_prep_wqe() error: we previously assumed 'ndlp' could be null (see line 22298)
Remove the unnecessary null check.
Link: https://lore.kernel.org/r/20220426181315.8990-1-jsmart2021@gmail.com
Fixes: d51cf5bd92 ("scsi: lpfc: Fix field overload in lpfc_iocbq data structure")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync() and
pm_runtime_put_noidle(). This change is just to simplify the code, no
actual functional changes.
Link: https://lore.kernel.org/r/20220420090353.2588804-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If major equals 0, register_chrdev() returns an error code when it fails.
This function dynamically allocates a major and returns its number on
success, so we should use "< 0" to check it instead of "!".
Link: https://lore.kernel.org/r/20220418105755.2558828-1-lv.ruyi@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
drivers/scsi/qla2xxx/qla_edif.c:660:11-15: Unneeded variable: "rval".
Return "0" on line 761.
Link: https://lore.kernel.org/r/20220426074334.9281-1-guozhengkui@vivo.com
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The bug is here:
p->target_id, p->target_lun);
The list iterator 'p' will point to a bogus position containing HEAD if the
list is empty or no element is found. This case must be checked before any
use of the iterator, otherwise it will lead to an invalid memory access.
To fix this bug, add a check. Use a new variable 'iter' as the list
iterator, and use the original variable 'p' as a dedicated pointer to point
to the found element.
Link: https://lore.kernel.org/r/20220414040231.2662-1-xiam0nd.tong@gmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The list iterator 'fcport' is always non-NULL so it doesn't need to be
checked. Thus just remove the unnecessary NULL check. Also remove the
unnecessary initializer because the list iterator is always initialized.
And adjust the position of blank lines.
Link: https://lore.kernel.org/r/20220405004055.24312-1-xiam0nd.tong@gmail.com
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix following checkincludes warning:
drivers/scsi/ufs/ufshcd.c: linux/nls.h is included more than once.
The include is in line 14. Remove the duplicate.
Link: https://lore.kernel.org/r/20220426104509.621394-1-wanjiabing@vivo.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some devices may return invalid or zeroed data during an UIC error
condition. In addition, reading these SFRs will clear them. This means the
subsequent error handling will not be able to see them and therefore no
error handling will be scheduled.
Skip reading these SFRs in ufshcd_dump_regs().
Link: https://lore.kernel.org/r/1648689845-33521-1-git-send-email-kwmad.kim@samsung.com
Fixes: d672475664 ("scsi: ufs: Use explicit access size in ufshcd_dump_regs")
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For SCSI hosts which enable host_tagset the NUMA node returned from
blk_mq_hw_queue_to_node() is NUMA_NO_NODE always. Then, since in
scsi_mq_setup_tags() the default we choose for the tag_set NUMA node is
NUMA_NO_NODE, we always evaluate the NUMA node as NUMA_NO_NODE in functions
like blk_mq_alloc_rq_map().
The reason we get NUMA_NO_NODE from blk_mq_hw_queue_to_node() is that the
hctx_idx passed is BLK_MQ_NO_HCTX_IDX - so we can't match against a (HW)
queue mapping index.
Improve this by defaulting the tag_set NUMA node to the same NUMA node of
the SCSI host DMA dev.
Link: https://lore.kernel.org/r/1648640315-21419-1-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove unneeded variable 'rc' used to store return value.
Link: https://lore.kernel.org/r/20220419065750.2573861-1-deng.changcheng@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All work currently pending will be done first by calling
destroy_workqueue(). There is no need to flush it explicitly.
Link: https://lore.kernel.org/r/20220424065406.3228528-1-ran.jianping@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All work currently pending will be done first by calling
destroy_workqueue(). There is no need to flush it explicitly.
Link: https://lore.kernel.org/r/20220424062413.3220315-1-ran.jianping@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All work currently pending will be done first by calling
destroy_workqueue(). There is no need to flush it explicitly.
Link: https://lore.kernel.org/r/20220424061845.3218774-1-ran.jianping@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The region set by the call to memset() is immediately overwritten by the
subsequent call to memcpy(). Drop redundant memset().
Link: https://lore.kernel.org/r/1650533091-28815-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes coccinelle warning:
./drivers/scsi/ipr.c:10095:13-15: Unneeded variable: "rc". Return "IRQ_HANDLED" on line 10104
Link: https://lore.kernel.org/r/1648433103-24308-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
io->sgl is allocated by kzalloc(). The memory is set to zero.
It is unnecessary to call memset again.
Link: https://lore.kernel.org/r/20220318145230.1031-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following warning showed up when compiling with W=1.
drivers/message/fusion/mptctl.c: In function ‘mptctl_hp_hostinfo’:
drivers/message/fusion/mptctl.c:2337:8: warning: variable ‘retval’ set but not used [-Wunused-but-set-variable]
int retval;
Fixing by removing the variable.
Link: https://lore.kernel.org/r/20220317030325.30526-1-alexander.vorwerk@stud.uni-goettingen.de
Signed-off-by: Alexander Vorwerk <alexander.vorwerk@stud.uni-goettingen.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
