This enlarges the bits availiable for stack randomisation on RV64 from
the default of 8MiB to 1GiB, to match arm64 and x86.
Also, update the documentation to reflect our support for stack
randomisation.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[Palmer: commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The EFI system partition uses the FAT file system. Many distributions add
an entry in /etc/fstab for the ESP. We must ensure that mounting does not
fail.
The default code page for FAT is 437 (cf. CONFIG_FAT_DEFAULT_CODEPAGE).
The default IO character set is "iso8859-1" (cf. CONFIG_NLS_ISO8859_1).
So let's enable NLS_CODEPAGE_437 and NLS_ISO8859_1 in defconfig.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
NVMe is a non-volatile storage media attached via PCIe.
As NVMe has much higher throughput than other block devices like
SATA it is a must have for RISC-V. Enable CONFIG_BLK_DEV_NVME.
The HiFive Unmatched is a board providing M.2 slots for NVMe drives.
Enable CONFIG_PCIE_FU740.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
* Support for PC-relative instructions (auipc and branches) in kprobes.
* Support for forced IRQ threading.
* Support for the hlt/nohlt kernel command line options, via the generic
idle loop.
* Support for showing the edge/level triggered behavior of interrupts in
/proc/interrupts.
* A handful of cleanups to our address mapping mechanisms.
* Support for allocating gigantic hugepages via CMA.
* Support for the undefined behavior sanitizer.
* A handful of cleanups to the VDSO that allow the kernel to build with
LLD.
* Support for hugepage migration.
-----BEGIN PGP SIGNATURE-----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=rDB3
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- support PC-relative instructions (auipc and branches) in kprobes
- support for forced IRQ threading
- support for the hlt/nohlt kernel command line options, via the
generic idle loop
- show the edge/level triggered behavior of interrupts
in /proc/interrupts
- a handful of cleanups to our address mapping mechanisms
- support for allocating gigantic hugepages via CMA
- support for the undefined behavior sanitizer (UBSAN)
- a handful of cleanups to the VDSO that allow the kernel to build with
LLD.
- support for hugepage migration
* tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
riscv: add support for hugepage migration
RISC-V: Fix VDSO build for !MMU
riscv: use strscpy to replace strlcpy
riscv: explicitly use symbol offsets for VDSO
riscv: Enable Undefined Behavior Sanitizer UBSAN
riscv: Keep the riscv Kconfig selects sorted
riscv: Support allocating gigantic hugepages using CMA
riscv: fix the global name pfn_base confliction error
riscv: Move early fdt mapping creation in its own function
riscv: Simplify BUILTIN_DTB device tree mapping handling
riscv: Use __maybe_unused instead of #ifdefs around variable declarations
riscv: Get rid of map_size parameter to create_kernel_page_table
riscv: Introduce va_kernel_pa_offset for 32-bit kernel
riscv: Optimize kernel virtual address conversion macro
dt-bindings: riscv: add starfive jh7100 bindings
riscv: Enable GENERIC_IRQ_SHOW_LEVEL
riscv: Enable idle generic idle loop
riscv: Allow forced irq threading
riscv: Implement thread_struct whitelist for hardened usercopy
riscv: kprobes: implement the branch instructions
...
... but make it a config option so that broken environments can disable
it when required.
We really should always have a clean build, and will disable specific
over-eager warnings as required, if we can't fix them. But while I
fairly religiously enforce that in my own tree, it doesn't get enforced
by various build robots that don't necessarily report warnings.
So this just makes '-Werror' a default compiler flag, but allows people
to disable it for their configuration if they have some particular
issues.
Occasionally, new compiler versions end up enabling new warnings, and it
can take a while before we have them fixed (or the warnings disabled if
that is what it takes), so the config option allows for that situation.
Hopefully this will mean that I get fewer pull requests that have new
warnings that were not noticed by various automation we have in place.
Knock wood.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are some straggler USB-serial changes for 5.15-rc1.
These were not included in the first pull request as they came in "late"
from Johan and I had missed them in my pull request earlier this week.
Nothing big in here, just some USB to serial driver updates and fixes.
All of these were in linux-next before I pulled them into my tree, and
have been in linux-next all this week from my tree with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYTMQHA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn27ACeOFMj4BM0SnH69oxhXcbhIxpUEKIAoKugLy6O
8fm9N2JX//QBIMBPK3HJ
=Vz2y
-----END PGP SIGNATURE-----
Merge tag 'usb-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull more USB updates from Greg KH:
"Here are some straggler USB-serial changes for 5.15-rc1.
These were not included in the first pull request as they came in
"late" from Johan and I had missed them in my pull request earlier
this week.
Nothing big in here, just some USB to serial driver updates and fixes.
All of these were in linux-next before I pulled them into my tree, and
have been in linux-next all this week from my tree with no reported
problems"
* tag 'usb-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: pl2303: fix GL type detection
USB: serial: replace symbolic permissions by octal permissions
USB: serial: cp210x: determine fw version for CP2105 and CP2108
USB: serial: cp210x: clean up type detection
USB: serial: cp210x: clean up set-chars request
USB: serial: cp210x: clean up control-request timeout
USB: serial: cp210x: fix flow-control error handling
USB: serial: cp210x: fix control-characters error handling
USB: serial: io_edgeport: drop unused descriptor helper
* blkdevs:
- Simplify the refcounting in blktrans_{open, release}
- Simplify blktrans_getgeo
- Remove blktrans_ref_mutex
- Simplify blktrans_dev_get
- Use lockdep_assert_held
- Don't hold del_mtd_blktrans_dev in blktrans_{open, release}
* ftl:
- Don't cast away the type when calling add_mtd_blktrans_dev
- Don't cast away the type when calling add_mtd_blktrans_dev
- Use container_of() rather than cast
- Fix use-after-free
- Add discard support
- Allow use of MTD_RAM for testing purposes
* concat:
- Check _read, _write callbacks existence before assignment
- Judge callback existence based on the master
* maps:
- Maps: remove dead MTD map driver for PMC-Sierra MSP boards
* mtdblock:
- Warn if added for a NAND device
- Add comment about UBI block devices
- Update old JFFS2 mention in Kconfig
* partitions:
- Redboot: convert to YAML
NAND core changes:
* Repair Miquel Raynal's email address in MAINTAINERS
* Fix a couple of spelling mistakes in Kconfig
* bbt: Skip bad blocks when searching for the BBT in NAND
* Remove never changed ret variable
Raw NAND changes:
* cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
* intel: Fix error handling in probe
* omap: Fix kernel doc warning on 'calcuate' typo
* gpmc: Fix the ECC bytes vs. OOB bytes equation
SPI-NAND core changes:
* Properly fill the OOB area.
* Fix comment
SPI-NAND drivers changes:
* macronix: Add Quad support for serial NAND flash
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmExS1gACgkQJWrqGEe9
VoSZcAf/SsUDpp/lqc+no4R+eUR/CWrbr3AKu2JjjgCJt0HK++Fy8LQU3FEjn9E8
CNBWYqIVVit1XhqGu192wh0ESsHGlNwjicB3Ul4/RFFC4WKs68kQe0gQrU6z/95V
jaTOW+B7PZh6MFbQROUVI97Cs3OTd8vCE3L2SgIW6krk8tnOEyddlgFsWLISjk6g
Ut1I473653fJAcr5OXEFJLWF+01q2azR9AiAkfKC47IUekTRJqjK2YJpAhsdf4hi
xqazp79sbcNXSHCgOOQv4/f03+SAiufRcNgztwrSWw2fdCg0csBC9ACwmdhhGGfd
7uFn+/Q3sVDOKTN7aAWW1KnykKXsJw==
=JFrk
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD changes:
- blkdevs:
- Simplify the refcounting in blktrans_{open, release}
- Simplify blktrans_getgeo
- Remove blktrans_ref_mutex
- Simplify blktrans_dev_get
- Use lockdep_assert_held
- Don't hold del_mtd_blktrans_dev in blktrans_{open, release}
- ftl:
- Don't cast away the type when calling add_mtd_blktrans_dev
- Don't cast away the type when calling add_mtd_blktrans_dev
- Use container_of() rather than cast
- Fix use-after-free
- Add discard support
- Allow use of MTD_RAM for testing purposes
- concat:
- Check _read, _write callbacks existence before assignment
- Judge callback existence based on the master
- maps:
- Maps: remove dead MTD map driver for PMC-Sierra MSP boards
- mtdblock:
- Warn if added for a NAND device
- Add comment about UBI block devices
- Update old JFFS2 mention in Kconfig
- partitions:
- Redboot: convert to YAML
NAND core changes:
- Repair Miquel Raynal's email address in MAINTAINERS
- Fix a couple of spelling mistakes in Kconfig
- bbt: Skip bad blocks when searching for the BBT in NAND
- Remove never changed ret variable
Raw NAND changes:
- cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
- intel: Fix error handling in probe
- omap: Fix kernel doc warning on 'calcuate' typo
- gpmc: Fix the ECC bytes vs. OOB bytes equation
SPI-NAND core changes:
- Properly fill the OOB area.
- Fix comment
SPI-NAND drivers changes:
- macronix: Add Quad support for serial NAND flash"
* tag 'mtd/for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (30 commits)
mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
mtd_blkdevs: simplify the refcounting in blktrans_{open, release}
mtd_blkdevs: simplify blktrans_getgeo
mtd_blkdevs: remove blktrans_ref_mutex
mtd_blkdevs: simplify blktrans_dev_get
mtd/rfd_ftl: don't cast away the type when calling add_mtd_blktrans_dev
mtd/ftl: don't cast away the type when calling add_mtd_blktrans_dev
mtd_blkdevs: use lockdep_assert_held
mtd_blkdevs: don't hold del_mtd_blktrans_dev in blktrans_{open, release}
mtd: rawnand: intel: Fix error handling in probe
mtd: mtdconcat: Check _read, _write callbacks existence before assignment
mtd: mtdconcat: Judge callback existence based on the master
mtd: maps: remove dead MTD map driver for PMC-Sierra MSP boards
mtd: rfd_ftl: use container_of() rather than cast
mtd: rfd_ftl: fix use-after-free
mtd: rfd_ftl: add discard support
mtd: rfd_ftl: allow use of MTD_RAM for testing purposes
mtdblock: Warn if added for a NAND device
mtd: spinand: macronix: Add Quad support for serial NAND flash
mtdblock: Add comment about UBI block devices
...
fs/binfmt_aout.c: In function ‘load_aout_library’:
fs/binfmt_aout.c:311:27: error: expected ‘)’ before ‘;’ token
311 | MAP_FIXED | MAP_PRIVATE;
| ^
fs/binfmt_aout.c:309:10: error: too few arguments to function ‘vm_mmap’
309 | error = vm_mmap(file, start_addr, ex.a_text + ex.a_data,
| ^~~~~~~
In file included from fs/binfmt_aout.c:12:
include/linux/mm.h:2626:35: note: declared here
2626 | extern unsigned long __must_check vm_mmap(struct file *, unsigned long,
| ^~~~~~~
Fix this by reverting the accidental replacement of a comma by a
semicolon.
Fixes: 42be8b4253 ("binfmt: don't use MAP_DENYWRITE when loading shared libraries via uselib()")
Reported-by: noreply@ellerman.id.au
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull MAP_DENYWRITE removal from David Hildenbrand:
"Remove all in-tree usage of MAP_DENYWRITE from the kernel and remove
VM_DENYWRITE.
There are some (minor) user-visible changes:
- We no longer deny write access to shared libaries loaded via legacy
uselib(); this behavior matches modern user space e.g. dlopen().
- We no longer deny write access to the elf interpreter after exec
completed, treating it just like shared libraries (which it often
is).
- We always deny write access to the file linked via /proc/pid/exe:
sys_prctl(PR_SET_MM_MAP/EXE_FILE) will fail if write access to the
file cannot be denied, and write access to the file will remain
denied until the link is effectivel gone (exec, termination,
sys_prctl(PR_SET_MM_MAP/EXE_FILE)) -- just as if exec'ing the file.
Cross-compiled for a bunch of architectures (alpha, microblaze, i386,
s390x, ...) and verified via ltp that especially the relevant tests
(i.e., creat07 and execve04) continue working as expected"
* tag 'denywrite-for-5.15' of git://github.com/davidhildenbrand/linux:
fs: update documentation of get_write_access() and friends
mm: ignore MAP_DENYWRITE in ksys_mmap_pgoff()
mm: remove VM_DENYWRITE
binfmt: remove in-tree usage of MAP_DENYWRITE
kernel/fork: always deny write access to current MM exe_file
kernel/fork: factor out replacing the current MM exe_file
binfmt: don't use MAP_DENYWRITE when loading shared libraries via uselib()
Merge NTFSv3 filesystem from Konstantin Komarov:
"This patch adds NTFS Read-Write driver to fs/ntfs3.
Having decades of expertise in commercial file systems development and
huge test coverage, we at Paragon Software GmbH want to make our
contribution to the Open Source Community by providing implementation
of NTFS Read-Write driver for the Linux Kernel.
This is fully functional NTFS Read-Write driver. Current version works
with NTFS (including v3.1) and normal/compressed/sparse files and
supports journal replaying.
We plan to support this version after the codebase once merged, and
add new features and fix bugs. For example, full journaling support
over JBD will be added in later updates"
Link: https://lore.kernel.org/lkml/20210729134943.778917-1-almaz.alexandrovich@paragon-software.com/
Link: https://lore.kernel.org/lkml/aa4aa155-b9b2-9099-b7a2-349d8d9d8fbd@paragon-software.com/
* git://github.com/Paragon-Software-Group/linux-ntfs3: (35 commits)
fs/ntfs3: Change how module init/info messages are displayed
fs/ntfs3: Remove GPL boilerplates from decompress lib files
fs/ntfs3: Remove unnecessary condition checking from ntfs_file_read_iter
fs/ntfs3: Fix integer overflow in ni_fiemap with fiemap_prep()
fs/ntfs3: Restyle comments to better align with kernel-doc
fs/ntfs3: Rework file operations
fs/ntfs3: Remove fat ioctl's from ntfs3 driver for now
fs/ntfs3: Restyle comments to better align with kernel-doc
fs/ntfs3: Fix error handling in indx_insert_into_root()
fs/ntfs3: Potential NULL dereference in hdr_find_split()
fs/ntfs3: Fix error code in indx_add_allocate()
fs/ntfs3: fix an error code in ntfs_get_acl_ex()
fs/ntfs3: add checks for allocation failure
fs/ntfs3: Use kcalloc/kmalloc_array over kzalloc/kmalloc
fs/ntfs3: Do not use driver own alloc wrappers
fs/ntfs3: Use kernel ALIGN macros over driver specific
fs/ntfs3: Restyle comment block in ni_parse_reparse()
fs/ntfs3: Remove unused including <linux/version.h>
fs/ntfs3: Fix fall-through warnings for Clang
fs/ntfs3: Fix one none utf8 char in source file
...
In this cycle, we've addressed some performance issues such as lock contention,
misbehaving compress_cache, allowing extent_cache for compressed files, and new
sysfs to adjust ra_size for fadvise. In order to diagnose the performance issues
quickly, we also added an iostat which shows the IO latencies periodically. On
the stability side, we've found two memory leakage cases in the error path in
compression flow. And, we've also fixed various corner cases in fiemap, quota,
checkpoint=disable, zstd, and so on.
Enhancement:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fix:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code paths such
as dio, unnecessary operations, debugfs/f2fs/status, sanity check, and typos.
-----BEGIN PGP SIGNATURE-----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=W67o
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've addressed some performance issues such as lock
contention, misbehaving compress_cache, allowing extent_cache for
compressed files, and new sysfs to adjust ra_size for fadvise.
In order to diagnose the performance issues quickly, we also added an
iostat which shows the IO latencies periodically.
On the stability side, we've found two memory leakage cases in the
error path in compression flow. And, we've also fixed various corner
cases in fiemap, quota, checkpoint=disable, zstd, and so on.
Enhancements:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fixes:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code
paths such as dio, unnecessary operations, debugfs/f2fs/status, sanity
check, and typos"
* tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits)
f2fs: should put a page beyond EOF when preparing a write
f2fs: deallocate compressed pages when error happens
f2fs: enable realtime discard iff device supports discard
f2fs: guarantee to write dirty data when enabling checkpoint back
f2fs: fix to unmap pages from userspace process in punch_hole()
f2fs: fix unexpected ENOENT comes from f2fs_map_blocks()
f2fs: fix to account missing .skipped_gc_rwsem
f2fs: adjust unlock order for cleanup
f2fs: Don't create discard thread when device doesn't support realtime discard
f2fs: rebuild nat_bits during umount
f2fs: introduce periodic iostat io latency traces
f2fs: separate out iostat feature
f2fs: compress: do sanity check on cluster
f2fs: fix description about main_blkaddr node
f2fs: convert S_IRUGO to 0444
f2fs: fix to keep compatibility of fault injection interface
f2fs: support fault injection for f2fs_kmem_cache_alloc()
f2fs: compress: allow write compress released file after truncate to zero
f2fs: correct comment in segment.h
f2fs: improve sbi status info in debugfs/f2fs/status
...
- New Features:
- Better client responsiveness when server isn't replying
- Use refcount_t in sunrpc rpc_client refcount tracking
- Add srcaddr and dst_port to the sunrpc sysfs info files
- Add basic support for connection sharing between servers with multiple NICs`
- Bugfixes and Cleanups:
- Sunrpc tracepoint cleanups
- Disconnect after ib_post_send() errors to avoid deadlocks
- Fix for tearing down rpcrdma_reps
- Fix a potential pNFS layoutget livelock loop
- pNFS layout barrier fixes
- Fix a potential memory corruption in rpc_wake_up_queued_task_set_status()
- Fix reconnection locking
- Fix return value of get_srcport()
- Remove rpcrdma_post_sends()
- Remove pNFS dead code
- Remove copy size restriction for inter-server copies
- Overhaul the NFS callback service
- Clean up sunrpc TCP socket shutdowns
- Always provide aligned buffers to RPC read layers
-----BEGIN PGP SIGNATURE-----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=Ad/3
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Better client responsiveness when server isn't replying
- Use refcount_t in sunrpc rpc_client refcount tracking
- Add srcaddr and dst_port to the sunrpc sysfs info files
- Add basic support for connection sharing between servers with multiple NICs`
Bugfixes and Cleanups:
- Sunrpc tracepoint cleanups
- Disconnect after ib_post_send() errors to avoid deadlocks
- Fix for tearing down rpcrdma_reps
- Fix a potential pNFS layoutget livelock loop
- pNFS layout barrier fixes
- Fix a potential memory corruption in rpc_wake_up_queued_task_set_status()
- Fix reconnection locking
- Fix return value of get_srcport()
- Remove rpcrdma_post_sends()
- Remove pNFS dead code
- Remove copy size restriction for inter-server copies
- Overhaul the NFS callback service
- Clean up sunrpc TCP socket shutdowns
- Always provide aligned buffers to RPC read layers"
* tag 'nfs-for-5.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (39 commits)
NFS: Always provide aligned buffers to the RPC read layers
NFSv4.1 add network transport when session trunking is detected
SUNRPC enforce creation of no more than max_connect xprts
NFSv4 introduce max_connect mount options
SUNRPC add xps_nunique_destaddr_xprts to xprt_switch_info in sysfs
SUNRPC keep track of number of transports to unique addresses
NFSv3: Delete duplicate judgement in nfs3_async_handle_jukebox
SUNRPC: Tweak TCP socket shutdown in the RPC client
SUNRPC: Simplify socket shutdown when not reusing TCP ports
NFSv4.2: remove restriction of copy size for inter-server copy.
NFS: Clean up the synopsis of callback process_op()
NFS: Extract the xdr_init_encode/decode() calls from decode_compound
NFS: Remove unused callback void decoder
NFS: Add a private local dispatcher for NFSv4 callback operations
SUNRPC: Eliminate the RQ_AUTHERR flag
SUNRPC: Set rq_auth_stat in the pg_authenticate() callout
SUNRPC: Add svc_rqst::rq_auth_stat
SUNRPC: Add dst_port to the sysfs xprt info file
SUNRPC: Add srcaddr as a file in sysfs
sunrpc: Fix return value of get_srcport()
...
This Kselftest update for Linux 5.15-rc1 consists of fixes to build
and test failures.
-- openat2 test failure for O_LARGEFILE flag on ARM64
-- x86 test build failures related to glibc 2.34 adding
support for variable sized MINSIGSTKSZ and SIGSTKSZ
-- removing obsolete configs in sync and cpufreq config files
-- minor spelling and duplicate header include cleanups
-----BEGIN PGP SIGNATURE-----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=Z7Bj
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Fixes to build and test failures:
- openat2 test failure for O_LARGEFILE flag on ARM64
- x86 test build failures related to glibc 2.34 adding support for
variable sized MINSIGSTKSZ and SIGSTKSZ
- removing obsolete configs in sync and cpufreq config files
- minor spelling and duplicate header include cleanups"
* tag 'linux-kselftest-next-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/cpufreq: Rename DEBUG_PI_LIST to DEBUG_PLIST
selftests/sync: Remove the deprecated config SYNC
selftests: safesetid: Fix spelling mistake "cant" -> "can't"
selftests/x86: Fix error: variably modified 'altstack_data' at file scope
kselftest:sched: remove duplicate include in cs_prctl_test.c
selftests: openat2: Fix testing failure for O_LARGEFILE flag
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
Pull ibft fix from Konrad Rzeszutek Wilk:
"An arm64 compile fix for the new code that fixed the iBFT KASLR
handling. I missed the original 0-day build email report"
* 'stable/for-linus-5.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: Fix isa_bus_to_virt not working under ARM
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are
given a CPU number on the same node as previously, when possible.
- Add support for a new more flexible device-tree format for specifying NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater,
Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R.
Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo
Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor,
Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian
Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, Zheng Yongjun.
-----BEGIN PGP SIGNATURE-----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=EbN0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
Fix an unaligned-access crash in the bootloader and drop asm/swab.h.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYTHYXgAKCRD3ErUQojoP
X1afAQCytCoygzHd6EyP6imoXsllx9hjzNHsii84zevhfQkBmQD9HARGlx23iYa+
oXBuOL+pPKcauLVMFTIVKTvLtlrjbw4=
=KH1L
-----END PGP SIGNATURE-----
Merge tag 'for-5.15/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Fix an unaligned-access crash in the bootloader and drop asm/swab.h"
* tag 'for-5.15/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix unaligned-access crash in bootloader
parisc: Drop __arch_swab16(), arch_swab24(), _arch_swab32() and __arch_swab64() functions
- fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=mKyO
-----END PGP SIGNATURE-----
Merge tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- converted Pistachio platform to use MIPS generic kernel
- fixes and cleanups
* tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits)
MIPS: Malta: fix alignment of the devicetree buffer
MIPS: ingenic: Unconditionally enable clock of CPU #0
MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports
MIPS: mscc: ocelot: disable all switch ports by default
MAINTAINERS: adjust PISTACHIO SOC SUPPORT after its retirement
MIPS: Return true/false (not 1/0) from bool functions
MIPS: generic: Return true/false (not 1/0) from bool functions
MIPS: Make a alias for pistachio_defconfig
MIPS: Retire MACH_PISTACHIO
MIPS: config: generic: Add config for Marduk board
pinctrl: pistachio: Make it as an option
phy: pistachio-usb: Depend on MIPS || COMPILE_TEST
clocksource/drivers/pistachio: Make it selectable for MIPS
clk: pistachio: Make it selectable for generic MIPS kernel
MIPS: DTS: Pistachio add missing cpc and cdmm
MIPS: generic: Allow generating FIT image for Marduk board
MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positive
MIPS: loongson2ef: don't build serial.o unconditionally
MIPS: Replace deprecated CPU-hotplug functions.
MIPS: Alchemy: Fix spelling contraction "cant" -> "can't"
...
A few cleanups and compiler warning fixes for OpenRISC. Also, this
includes dts and defconfig updates to enable Ethernet on OpenRISC/Litex
FPGA SoC's now that the LiteEth driver has gone upstream.
-----BEGIN PGP SIGNATURE-----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=md7e
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"A few cleanups and compiler warning fixes for OpenRISC.
Also, this includes dts and defconfig updates to enable Ethernet on
OpenRISC/Litex FPGA SoC's now that the LiteEth driver has gone
upstream"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc/litex: Update defconfig
openrisc/litex: Add ethernet device
openrisc/litex: Update uart address
openrisc: Fix compiler warnings in setup
openrisc: rename or32 code & comments to or1k
openrisc: don't printk() unconditionally
Including:
- New DART IOMMU driver for Apple Silicon M1 chips.
- Optimizations for iommu_[map/unmap] performance
- Selective TLB flush support for the AMD IOMMU driver to make
it more efficient on emulated IOMMUs.
- Rework IOVA setup and default domain type setting to move more
code out of IOMMU drivers and to support runtime switching
between certain types of default domains.
- VT-d Updates from Lu Baolu:
- Update the virtual command related registers
- Enable Intel IOMMU scalable mode by default
- Preset A/D bits for user space DMA usage
- Allow devices to have more than 32 outstanding PRs
- Various cleanups
- ARM SMMU Updates from Will Deacon:
- SMMUv3: Minor optimisation to avoid zeroing struct members on CMD submission
- SMMUv3: Increased use of batched commands to reduce submission latency
- SMMUv3: Refactoring in preparation for ECMDQ support
- SMMUv2: Fix races when probing devices with identical StreamIDs
- SMMUv2: Optimise walk cache flushing for Qualcomm implementations
- SMMUv2: Allow deep sleep states for some Qualcomm SoCs with shared clocks
- Various smaller optimizations, cleanups, and fixes
-----BEGIN PGP SIGNATURE-----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=zVaQ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- New DART IOMMU driver for Apple Silicon M1 chips
- Optimizations for iommu_[map/unmap] performance
- Selective TLB flush support for the AMD IOMMU driver to make it more
efficient on emulated IOMMUs
- Rework IOVA setup and default domain type setting to move more code
out of IOMMU drivers and to support runtime switching between certain
types of default domains
- VT-d Updates from Lu Baolu:
- Update the virtual command related registers
- Enable Intel IOMMU scalable mode by default
- Preset A/D bits for user space DMA usage
- Allow devices to have more than 32 outstanding PRs
- Various cleanups
- ARM SMMU Updates from Will Deacon:
SMMUv3:
- Minor optimisation to avoid zeroing struct members on CMD submission
- Increased use of batched commands to reduce submission latency
- Refactoring in preparation for ECMDQ support
SMMUv2:
- Fix races when probing devices with identical StreamIDs
- Optimise walk cache flushing for Qualcomm implementations
- Allow deep sleep states for some Qualcomm SoCs with shared clocks
- Various smaller optimizations, cleanups, and fixes
* tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (85 commits)
iommu/io-pgtable: Abstract iommu_iotlb_gather access
iommu/arm-smmu: Fix missing unlock on error in arm_smmu_device_group()
iommu/vt-d: Add present bit check in pasid entry setup helpers
iommu/vt-d: Use pasid_pte_is_present() helper function
iommu/vt-d: Drop the kernel doc annotation
iommu/vt-d: Allow devices to have more than 32 outstanding PRs
iommu/vt-d: Preset A/D bits for user space DMA usage
iommu/vt-d: Enable Intel IOMMU scalable mode by default
iommu/vt-d: Refactor Kconfig a bit
iommu/vt-d: Remove unnecessary oom message
iommu/vt-d: Update the virtual command related registers
iommu: Allow enabling non-strict mode dynamically
iommu: Merge strictness and domain type configs
iommu: Only log strictness for DMA domains
iommu: Expose DMA domain strictness via sysfs
iommu: Express DMA strictness via the domain type
iommu/vt-d: Prepare for multiple DMA domain types
iommu/arm-smmu: Prepare for multiple DMA domain types
iommu/amd: Prepare for multiple DMA domain types
iommu: Introduce explicit type for non-strict DMA domains
...
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"A new feature called restricted DMA pools. It allows SWIOTLB to
utilize per-device (or per-platform) allocated memory pools instead of
using the global one.
The first big user of this is ARM Confidential Computing where the
memory for DMA operations can be set per platform"
* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: (23 commits)
swiotlb: use depends on for DMA_RESTRICTED_POOL
of: restricted dma: Don't fail device probe on rmem init failure
of: Move of_dma_set_restricted_buffer() into device.c
powerpc/svm: Don't issue ultracalls if !mem_encrypt_active()
s390/pv: fix the forcing of the swiotlb
swiotlb: Free tbl memory in swiotlb_exit()
swiotlb: Emit diagnostic in swiotlb_exit()
swiotlb: Convert io_default_tlb_mem to static allocation
of: Return success from of_dma_set_restricted_buffer() when !OF_ADDRESS
swiotlb: add overflow checks to swiotlb_bounce
swiotlb: fix implicit debugfs declarations
of: Add plumbing for restricted DMA pool
dt-bindings: of: Add restricted DMA pool
swiotlb: Add restricted DMA pool initialization
swiotlb: Add restricted DMA alloc/free support
swiotlb: Refactor swiotlb_tbl_unmap_single
swiotlb: Move alloc_size to swiotlb_find_slots
swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
swiotlb: Update is_swiotlb_active to add a struct device argument
swiotlb: Update is_swiotlb_buffer to add a struct device argument
...
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
There is a usecase in Android that an app process's memory is swapped out
by process_madvise() with MADV_PAGEOUT, such as the memory is swapped to
zram or a backing device. When the process is scheduled to running, like
switch to foreground, multiple page faults may cause the app dropped
frames.
To reduce the problem, System Management Software can read-ahead memory
of the process immediately when the app switches to forground. Calling
process_madvise() with MADV_WILLNEED can meet this need.
Link: https://lkml.kernel.org/r/20210804082010.12482-1-zhangkui@oppo.com
Signed-off-by: zhangkui <zhangkui@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return value of pagetypeinfo_showfree and pagetypeinfo_showblockcount
are unused now. Remove them.
Link: https://lkml.kernel.org/r/20210715122911.15700-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can replace the array_num * sizeof(array[0]) with sizeof(array) to
simplify the code.
Link: https://lkml.kernel.org/r/20210715122911.15700-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Cleanup for vmstat".
This series contains cleanups to remove unneeded return value, correct
wrong comment and simplify the array size calculation. More details can
be found in the respective changelogs.
This patch (of 3):
Correct wrong fls(mem+1) to fls(mem)+1 and remove the duplicated comment
with quiet_vmstat().
Link: https://lkml.kernel.org/r/20210715122911.15700-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210715122911.15700-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit b239f7daf5 ("percpu: set PCPU_BITMAP_BLOCK_SIZE to PAGE_SIZE")
removed the parameter 'for_alloc', so remove this comment.
Link: https://lkml.kernel.org/r/1630576043-21367-1-git-send-email-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since merged pages are copied every time they need to be modified, the
write access time is different between shared and non-shared pages. Add
ksm_cow_time() function which evaluates latency of these COW breaks.
First, 4000 pages are allocated and the time, required to modify 1 byte in
every other page, is measured. After this, the pages are merged into 2000
pairs and in each pair, 1 page is modified (i.e. they are decoupled) to
detect COW breaks. The time needed to break COW of merged pages is then
compared with performance of non-shared pages.
The test is run as follows: ./ksm_tests -C
The output:
Total size: 15 MiB
Not merged pages:
Total time: 0.002185489 s
Average speed: 3202.945 MiB/s
Merged pages:
Total time: 0.004386872 s
Average speed: 1595.670 MiB/s
Link: https://lkml.kernel.org/r/1d03ee0d1b341959d4b61672c6401d498bff5652.1629386192.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "add KSM performance tests", v3.
Extend KSM self tests with a performance benchmark. These tests are not
part of regular regression testing, as they are mainly intended to be used
by developers making changes to the memory management subsystem.
This patch (of 2):
Add ksm_merge_time() function to determine speed and time needed for
merging. The total spent time is shown in seconds while speed is in
MiB/s. User must specify the size of duplicated memory area (in MiB)
before running the test.
The test is run as follows: ./ksm_tests -P -s 100
The output:
Total size: 100 MiB
Total time: 0.201106786 s
Average speed: 497.248 MiB/s
Link: https://lkml.kernel.org/r/cover.1629386192.git.zhansayabagdaulet@gmail.com
Link: https://lkml.kernel.org/r/318b946ac80cc9205c89d0962048378f7ce0705b.1629386192.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ksm_stable_node_chains_prune_millisecs is declared as int, but in
stable__node_chains_prune_millisecs_store(), it can store values up to
UINT_MAX. Change its type to unsigned int.
Link: https://lkml.kernel.org/r/20210806111351.GA71845@asus
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add check_ksm_numa_merge() function to test that pages in different NUMA
nodes are being handled properly. First, two duplicate pages are
allocated in two separate NUMA nodes using the libnuma library. Since
there is one unique page in each node, with merge_across_nodes = 0, there
won't be any shared pages. If merge_across_nodes is set to 1, the pages
will be treated as usual duplicate pages and will be merged. If NUMA
config is not enabled or the number of NUMA nodes is less than two, then
the test is skipped. The test is run as follows: ./ksm_tests -N
Link: https://lkml.kernel.org/r/071c17b5b04ebb0dfeba137acc495e5dd9d2a719.1626252248.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add check_ksm_zero_page_merge() function to test that empty pages are
being handled properly. For this, several zero pages are allocated and
merged using madvise. If use_zero_pages is enabled, the pages must be
shared with the special kernel zero pages; otherwise, they are merged as
usual duplicate pages. The test is run as follows: ./ksm_tests -Z
Link: https://lkml.kernel.org/r/6d0caab00d4bdccf5e3791cb95cf6dfd5eb85e45.1626252248.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add check_ksm_unmerge() function to verify that KSM is properly unmerging
shared pages. For this, two duplicate pages are merged first and then
their contents are modified. Since they are not identical anymore, the
pages must be unmerged and the number of merged pages has to be 0. The
test is run as follows: ./ksm_tests -U
Link: https://lkml.kernel.org/r/c0f55420440d704d5b094275b4365aa1b2ad46b5.1626252248.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "add KSM selftests".
Introduce selftests to validate the functionality of KSM. The tests are
run on private anonymous pages. Since some KSM tunables are modified,
their starting values are saved and restored after testing. At the start,
run is set to 2 to ensure that only test pages will be merged (we assume
that no applications make madvise syscalls in the background). If KSM
config not enabled, all tests will be skipped.
This patch (of 4):
Add check_ksm_merge() function to check the basic merging feature of KSM.
First, some number of identical pages are allocated and the MADV_MERGEABLE
advice is given to merge these pages. Then, pages_shared and
pages_sharing values are compared with the expected numbers using
assert_ksm_pages_count() function. The number of pages can be changed
using -p option.
Link: https://lkml.kernel.org/r/cover.1626252248.git.zhansayabagdaulet@gmail.com
Link: https://lkml.kernel.org/r/90287685c13300972ea84de93d1f3f900373f9fe.1626252248.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the expected "Return:" format to prevent a kernel-doc warning.
mm/migrate.c:1157: warning: Excess function parameter 'returns' description in 'next_demotion_node'
Link: https://lkml.kernel.org/r/20210808203151.10632-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Split off from prev patch in the series that implements the syscall.
Link: https://lkml.kernel.org/r/20210809185259.405936-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jan Engelhardt <jengelh@inai.de>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In modern systems it's not unusual to have a system component monitoring
memory conditions of the system and tasked with keeping system memory
pressure under control. One way to accomplish that is to kill
non-essential processes to free up memory for more important ones.
Examples of this are Facebook's OOM killer daemon called oomd and
Android's low memory killer daemon called lmkd.
For such system component it's important to be able to free memory quickly
and efficiently. Unfortunately the time process takes to free up its
memory after receiving a SIGKILL might vary based on the state of the
process (uninterruptible sleep), size and OPP level of the core the
process is running. A mechanism to free resources of the target process
in a more predictable way would improve system's ability to control its
memory pressure.
Introduce process_mrelease system call that releases memory of a dying
process from the context of the caller. This way the memory is freed in a
more controllable way with CPU affinity and priority of the caller. The
workload of freeing the memory will also be charged to the caller. The
operation is allowed only on a dying process.
After previous discussions [1, 2, 3] the decision was made [4] to
introduce a dedicated system call to cover this use case.
The API is as follows,
int process_mrelease(int pidfd, unsigned int flags);
DESCRIPTION
The process_mrelease() system call is used to free the memory of
an exiting process.
The pidfd selects the process referred to by the PID file
descriptor.
(See pidfd_open(2) for further information)
The flags argument is reserved for future use; currently, this
argument must be specified as 0.
RETURN VALUE
On success, process_mrelease() returns 0. On error, -1 is
returned and errno is set to indicate the error.
ERRORS
EBADF pidfd is not a valid PID file descriptor.
EAGAIN Failed to release part of the address space.
EINTR The call was interrupted by a signal; see signal(7).
EINVAL flags is not 0.
EINVAL The memory of the task cannot be released because the
process is not exiting, the address space is shared
with another live process or there is a core dump in
progress.
ENOSYS This system call is not supported, for example, without
MMU support built into Linux.
ESRCH The target process does not exist (i.e., it has terminated
and been waited on).
[1] https://lore.kernel.org/lkml/20190411014353.113252-3-surenb@google.com/
[2] https://lore.kernel.org/linux-api/20201113173448.1863419-1-surenb@google.com/
[3] https://lore.kernel.org/linux-api/20201124053943.1684874-3-surenb@google.com/
[4] https://lore.kernel.org/linux-api/20201223075712.GA4719@lst.de/
Link: https://lkml.kernel.org/r/20210809185259.405936-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jan Engelhardt <jengelh@inai.de>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are a lot of uses of memblock_find_in_range() along with
memblock_reserve() from the times memblock allocation APIs did not exist.
memblock_find_in_range() is the very core of memblock allocations, so any
future changes to its internal behaviour would mandate updates of all the
users outside memblock.
Replace the calls to memblock_find_in_range() with an equivalent calls to
memblock_phys_alloc() and memblock_phys_alloc_range() and make
memblock_find_in_range() private method of memblock.
This simplifies the callers, ensures that (unlikely) errors in
memblock_reserve() are handled and improves maintainability of
memblock_find_in_range().
Link: https://lkml.kernel.org/r/20210816122622.30279-1-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ACPI]
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Nick Kossifidis <mick@ics.forth.gr> [riscv]
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As they all do the same thing: sanity check and save nodemask info, create
one mpol_new_nodemask() to reduce redundancy.
Link: https://lkml.kernel.org/r/1627970362-61305-6-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adds a new mode to the existing mempolicy modes, MPOL_PREFERRED_MANY.
MPOL_PREFERRED_MANY will be adequately documented in the internal
admin-guide with this patch. Eventually, the man pages for mbind(2),
get_mempolicy(2), set_mempolicy(2) and numactl(8) will also have text
about this mode. Those shall contain the canonical reference.
NUMA systems continue to become more prevalent. New technologies like
PMEM make finer grain control over memory access patterns increasingly
desirable. MPOL_PREFERRED_MANY allows userspace to specify a set of nodes
that will be tried first when performing allocations. If those
allocations fail, all remaining nodes will be tried. It's a straight
forward API which solves many of the presumptive needs of system
administrators wanting to optimize workloads on such machines. The mode
will work either per VMA, or per thread.
[Michal Hocko: refine kernel doc for MPOL_PREFERRED_MANY]
Link: https://lore.kernel.org/r/20200630212517.308045-13-ben.widawsky@intel.com
Link: https://lkml.kernel.org/r/1627970362-61305-5-git-send-email-feng.tang@intel.com
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The semantics of MPOL_PREFERRED_MANY is similar to MPOL_PREFERRED, that it
will first try to allocate memory from the preferred node(s), and fallback
to all nodes in system when first try fails.
Add a dedicated function alloc_pages_preferred_many() for it just like for
'interleave' policy, which will be used by 2 general memoory allocation
APIs: alloc_pages() and alloc_pages_vma()
Link: https://lore.kernel.org/r/20200630212517.308045-9-ben.widawsky@intel.com
Link: https://lkml.kernel.org/r/1627970362-61305-3-git-send-email-feng.tang@intel.com
Suggested-by: Michal Hocko <mhocko@suse.com>
Originally-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Introduce multi-preference mempolicy", v7.
This patch series introduces the concept of the MPOL_PREFERRED_MANY
mempolicy. This mempolicy mode can be used with either the
set_mempolicy(2) or mbind(2) interfaces. Like the MPOL_PREFERRED
interface, it allows an application to set a preference for nodes which
will fulfil memory allocation requests. Unlike the MPOL_PREFERRED mode,
it takes a set of nodes. Like the MPOL_BIND interface, it works over a
set of nodes. Unlike MPOL_BIND, it will not cause a SIGSEGV or invoke the
OOM killer if those preferred nodes are not available.
Along with these patches are patches for libnuma, numactl, numademo, and
memhog. They still need some polish, but can be found here:
https://gitlab.com/bwidawsk/numactl/-/tree/prefer-many It allows new
usage: `numactl -P 0,3,4`
The goal of the new mode is to enable some use-cases when using tiered memory
usage models which I've lovingly named.
1a. The Hare - The interconnect is fast enough to meet bandwidth and
latency requirements allowing preference to be given to all nodes with
"fast" memory.
1b. The Indiscriminate Hare - An application knows it wants fast
memory (or perhaps slow memory), but doesn't care which node it runs
on. The application can prefer a set of nodes and then xpu bind to
the local node (cpu, accelerator, etc). This reverses the nodes are
chosen today where the kernel attempts to use local memory to the CPU
whenever possible. This will attempt to use the local accelerator to
the memory.
2. The Tortoise - The administrator (or the application itself) is
aware it only needs slow memory, and so can prefer that.
Much of this is almost achievable with the bind interface, but the bind
interface suffers from an inability to fallback to another set of nodes if
binding fails to all nodes in the nodemask.
Like MPOL_BIND a nodemask is given. Inherently this removes ordering from the
preference.
> /* Set first two nodes as preferred in an 8 node system. */
> const unsigned long nodes = 0x3
> set_mempolicy(MPOL_PREFER_MANY, &nodes, 8);
> /* Mimic interleave policy, but have fallback *.
> const unsigned long nodes = 0xaa
> set_mempolicy(MPOL_PREFER_MANY, &nodes, 8);
Some internal discussion took place around the interface. There are two
alternatives which we have discussed, plus one I stuck in:
1. Ordered list of nodes. Currently it's believed that the added
complexity is nod needed for expected usecases.
2. A flag for bind to allow falling back to other nodes. This
confuses the notion of binding and is less flexible than the current
solution.
3. Create flags or new modes that helps with some ordering. This
offers both a friendlier API as well as a solution for more customized
usage. It's unknown if it's worth the complexity to support this.
Here is sample code for how this might work:
> // Prefer specific nodes for some something wacky
> set_mempolicy(MPOL_PREFER_MANY, 0x17c, 1024);
>
> // Default
> set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_SOCKET, NULL, 0);
> // which is the same as
> set_mempolicy(MPOL_DEFAULT, NULL, 0);
>
> // The Hare
> set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_TYPE, NULL, 0);
>
> // The Tortoise
> set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_TYPE_REV, NULL, 0);
>
> // Prefer the fast memory of the first two sockets
> set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_TYPE, -1, 2);
>
This patch (of 5):
The NUMA APIs currently allow passing in a "preferred node" as a single
bit set in a nodemask. If more than one bit it set, bits after the first
are ignored.
This single node is generally OK for location-based NUMA where memory
being allocated will eventually be operated on by a single CPU. However,
in systems with multiple memory types, folks want to target a *type* of
memory instead of a location. For instance, someone might want some
high-bandwidth memory but do not care about the CPU next to which it is
allocated. Or, they want a cheap, high capacity allocation and want to
target all NUMA nodes which have persistent memory in volatile mode. In
both of these cases, the application wants to target a *set* of nodes, but
does not want strict MPOL_BIND behavior as that could lead to OOM killer
or SIGSEGV.
So add MPOL_PREFERRED_MANY policy to support the multiple preferred nodes
requirement. This is not a pie-in-the-sky dream for an API. This was a
response to a specific ask of more than one group at Intel. Specifically:
1. There are existing libraries that target memory types such as
https://github.com/memkind/memkind. These are known to suffer from
SIGSEGV's when memory is low on targeted memory "kinds" that span more
than one node. The MCDRAM on a Xeon Phi in "Cluster on Die" mode is an
example of this.
2. Volatile-use persistent memory users want to have a memory policy
which is targeted at either "cheap and slow" (PMEM) or "expensive and
fast" (DRAM). However, they do not want to experience allocation
failures when the targeted type is unavailable.
3. Allocate-then-run. Generally, we let the process scheduler decide
on which physical CPU to run a task. That location provides a default
allocation policy, and memory availability is not generally considered
when placing tasks. For situations where memory is valuable and
constrained, some users want to allocate memory first, *then* allocate
close compute resources to the allocation. This is the reverse of the
normal (CPU) model. Accelerators such as GPUs that operate on
core-mm-managed memory are interested in this model.
A check is added in sanitize_mpol_flags() to not permit 'prefer_many'
policy to be used for now, and will be removed in later patch after all
implementations for 'prefer_many' are ready, as suggested by Michal Hocko.
[mhocko@kernel.org: suggest to refine policy_node/policy_nodemask handling]
Link: https://lkml.kernel.org/r/1627970362-61305-1-git-send-email-feng.tang@intel.com
Link: https://lore.kernel.org/r/20200630212517.308045-4-ben.widawsky@intel.com
Link: https://lkml.kernel.org/r/1627970362-61305-2-git-send-email-feng.tang@intel.com
Co-developed-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Huang Ying <ying.huang@intel.com>b
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The caller of mpol_misplaced() already use NUMA_NO_NODE to check whether
current page node is misplaced, thus using NUMA_NO_NODE in
mpol_misplaced() instead of magic number is more readable.
Link: https://lkml.kernel.org/r/1b77c0ce21183fa86f4db250b115cf5e27396528.1627558356.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The proactive compaction[1] gets triggered for every 500msec and run
compaction on the node for COMPACTION_HPAGE_ORDER (usually order-9) pages
based on the value set to sysctl.compaction_proactiveness. Triggering the
compaction for every 500msec in search of COMPACTION_HPAGE_ORDER pages is
not needed for all applications, especially on the embedded system
usecases which may have few MB's of RAM. Enabling the proactive
compaction in its state will endup in running almost always on such
systems.
Other side, proactive compaction can still be very much useful for getting
a set of higher order pages in some controllable manner(controlled by
using the sysctl.compaction_proactiveness). So, on systems where enabling
the proactive compaction always may proove not required, can trigger the
same from user space on write to its sysctl interface. As an example, say
app launcher decide to launch the memory heavy application which can be
launched fast if it gets more higher order pages thus launcher can prepare
the system in advance by triggering the proactive compaction from
userspace.
This triggering of proactive compaction is done on a write to
sysctl.compaction_proactiveness by user.
[1]https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=facdaa917c4d5a376d09d25865f5a863f906234a
[akpm@linux-foundation.org: tweak vm.rst, per Mike]
Link: https://lkml.kernel.org/r/1627653207-12317-1-git-send-email-charante@codeaurora.org
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Nitin Gupta <nigupta@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka figured out that when fragmentation score didn't go down
across the proactive compaction i.e. when no progress is made, next wake
up for proactive compaction is deferred for 1 << COMPACT_MAX_DEFER_SHIFT,
i.e. 64 times, with each wakeup interval of
HPAGE_FRAG_CHECK_INTERVAL_MSEC(=500). In each of this wakeup, it just
decrement 'proactive_defer' counter and goes sleep i.e. it is getting
woken to just decrement a counter.
The same deferral time can also achieved by simply doing the
HPAGE_FRAG_CHECK_INTERVAL_MSEC << COMPACT_MAX_DEFER_SHIFT thus unnecessary
wakeup of kcompact thread is avoided thus also removes the need of
'proactive_defer' thread counter.
[akpm@linux-foundation.org: tweak comment]
Link: https://lore.kernel.org/linux-fsdevel/88abfdb6-2c13-b5a6-5b46-742d12d1c910@suse.cz/
Link: https://lkml.kernel.org/r/1626869599-25412-1-git-send-email-charante@codeaurora.org
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Nitin Gupta <nigupta@nvidia.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drop_slab_node() is called as part of echo 2>/proc/sys/vm/drop_caches
operation. It iterates over all memcgs and calls shrink_slab() which in
turn iterates over all slab shrinkers. Freed objects are counted and as
long as the total number of freed objects from all memcgs and shrinkers is
higher than 10, drop_slab_node() loops for another full memcgs*shrinkers
iteration.
This arbitrary constant threshold of 10 can result in effectively an
infinite loop on a system with large number of memcgs and/or parallel
activity that allocates new objects. This has been reported previously by
Chunxin Zang [1] and recently by our customer.
The previous report [1] has resulted in commit 069c411de4 ("mm/vmscan:
fix infinite loop in drop_slab_node") which added a check for signals
allowing the user to terminate the command writing to drop_caches. At the
time it was also considered to make the threshold grow with each iteration
to guarantee termination, but such patch hasn't been formally proposed
yet.
This patch implements the dynamically growing threshold. At first
iteration it's enough to free one object to continue, and this threshold
effectively doubles with each iteration. Our customer's feedback was
positive.
There is always a risk that this change will result on some system in a
previously terminating drop_caches operation to terminate sooner and free
fewer objects. Ideally the semantics would guarantee freeing all freeable
objects that existed at the moment of starting the operation, while not
looping forever for newly allocated objects, but that's not feasible to
track. In the less ideal solution based on thresholds, arguably the
termination guarantee is more important than the exhaustiveness guarantee.
If there are reports of large regression wrt being exhaustive, we can
tune how fast the threshold grows.
[1] https://lore.kernel.org/lkml/20200909152047.27905-1-zangchunxin@bytedance.com/T/#u
[vbabka@suse.cz: avoid undefined shift behaviour]
Link: https://lkml.kernel.org/r/2f034e6f-a753-550a-f374-e4e23899d3d5@suse.cz
Link: https://lkml.kernel.org/r/20210818152239.25502-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Chunxin Zang <zangchunxin@bytedance.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We could add 'else' to remove the somewhat odd check_pending label to make
code core succinct.
Link: https://lkml.kernel.org/r/20210717065911.61497-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kefeng Wang