Simplify code pattern of 'folio->index + folio_nr_pages(folio)' by using
the existing helper folio_next_index() in filemap_get_folios_contig().
Link: https://lkml.kernel.org/r/20231107024635.4512-1-duminjie@vivo.com
Signed-off-by: Minjie Du <duminjie@vivo.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The MHP_MEMMAP_ON_MEMORY flag for hotplugged memory is restricted to
'memblock_size' chunks of memory being added. Adding a larger span of
memory precludes memmap_on_memory semantics.
For users of hotplug such as kmem, large amounts of memory might get added
from the CXL subsystem. In some cases, this amount may exceed the
available 'main memory' to store the memmap for the memory being added.
In this case, it is useful to have a way to place the memmap on the memory
being added, even if it means splitting the addition into memblock-sized
chunks.
Change add_memory_resource() to loop over memblock-sized chunks of memory
if caller requested memmap_on_memory, and if other conditions for it are
met. Teach try_remove_memory() to also expect that a memory range being
removed might have been split up into memblock sized chunks, and to loop
through those as needed.
This does preclude being able to use PUD mappings in the direct map; a
proposal to how this could be optimized in the future is laid out here[1].
[1]: https://lore.kernel.org/linux-mm/b6753402-2de9-25b2-36e9-eacd49752b19@redhat.com/
Link: https://lkml.kernel.org/r/20231107-vv-kmem_memmap-v10-2-1253ec050ed0@intel.com
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Fan Ni <fan.ni@samsung.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: use memmap_on_memory semantics for dax/kmem", v10.
The dax/kmem driver can potentially hot-add large amounts of memory
originating from CXL memory expanders, or NVDIMMs, or other 'device
memories'. There is a chance there isn't enough regular system memory
available to fit the memmap for this new memory. It's therefore
desirable, if all other conditions are met, for the kmem managed memory to
place its memmap on the newly added memory itself.
The main hurdle for accomplishing this for kmem is that memmap_on_memory
can only be done if the memory being added is equal to the size of one
memblock. To overcome this, allow the hotplug code to split an
add_memory() request into memblock-sized chunks, and try_remove_memory()
to also expect and handle such a scenario.
Patch 1 replaces an open-coded kmemdup()
Patch 2 teaches the memory_hotplug code to allow for splitting
add_memory() and remove_memory() requests over memblock sized chunks.
Patch 3 allows the dax region drivers to request memmap_on_memory
semantics. CXL dax regions default this to 'on', all others default to
off to keep existing behavior unchanged.
This patch (of 3):
A review of the memmap_on_memory modifications to add_memory_resource()
revealed an instance of an open-coded kmemdup(). Replace it with
kmemdup().
Link: https://lkml.kernel.org/r/20231107-vv-kmem_memmap-v10-0-1253ec050ed0@intel.com
Link: https://lkml.kernel.org/r/20231107-vv-kmem_memmap-v10-1-1253ec050ed0@intel.com
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sanity check that makes sure the nodes cover all memory loops over
numa_meminfo to count the pages that have node id assigned by the
firmware, then loops again over memblock.memory to find the total amount
of memory and in the end checks that the difference between the total
memory and memory that covered by nodes is less than some threshold.
Worse, the loop over numa_meminfo calls __absent_pages_in_range() that
also partially traverses memblock.memory.
It's much simpler and more efficient to have a single traversal of
memblock.memory that verifies that amount of memory not covered by nodes
is less than a threshold.
Introduce memblock_validate_numa_coverage() that does exactly that and use
it instead of numa_meminfo_cover_memory().
Link: https://lkml.kernel.org/r/20231026020329.327329-1-zhiguangni01@gmail.com
Signed-off-by: Liam Ni <zhiguangni01@gmail.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Feiyang Chen <chenfeiyang@loongson.cn>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I can observe an obvious tlb flush hotspot when splitting a pte-mapped THP
on my ARM64 server, and the distribution of this hotspot is as follows:
- 16.85% split_huge_page_to_list
+ 7.80% down_write
- 7.49% try_to_migrate
- 7.48% rmap_walk_anon
7.23% ptep_clear_flush
+ 1.52% __split_huge_page
The reason is that the split_huge_page_to_list() will build migration
entries for each subpage of a pte-mapped Anon THP by try_to_migrate(), or
unmap for file THP, and it will clear and tlb flush for each subpage's
pte. Moreover, the split_huge_page_to_list() will set TTU_SPLIT_HUGE_PMD
flag to ensure the THP is already a pte-mapped THP before splitting it to
some normal pages.
Actually, there is no need to flush tlb for each subpage immediately,
instead we can batch tlb flush for the pte-mapped THP to improve the
performance.
After this patch, we can see the batch tlb flush can improve the latency
obviously when running thpscale.
k6.5-base patched
Amean fault-both-1 1071.17 ( 0.00%) 901.83 * 15.81%*
Amean fault-both-3 2386.08 ( 0.00%) 1865.32 * 21.82%*
Amean fault-both-5 2851.10 ( 0.00%) 2273.84 * 20.25%*
Amean fault-both-7 3679.91 ( 0.00%) 2881.66 * 21.69%*
Amean fault-both-12 5916.66 ( 0.00%) 4369.55 * 26.15%*
Amean fault-both-18 7981.36 ( 0.00%) 6303.57 * 21.02%*
Amean fault-both-24 10950.79 ( 0.00%) 8752.56 * 20.07%*
Amean fault-both-30 14077.35 ( 0.00%) 10170.01 * 27.76%*
Amean fault-both-32 13061.57 ( 0.00%) 11630.08 * 10.96%*
Link: https://lkml.kernel.org/r/431d9fb6823036369dcb1d3b2f63732f01df21a7.1698488264.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In dup_mmap(), using __mt_dup() to duplicate the old maple tree and then
directly replacing the entries of VMAs in the new maple tree can result in
better performance. __mt_dup() uses DFS pre-order to duplicate the maple
tree, so it is efficient.
The average time complexity of __mt_dup() is O(n), where n is the number
of VMAs. The proof of the time complexity is provided in the commit log
that introduces __mt_dup(). After duplicating the maple tree, each
element is traversed and replaced (ignoring the cases of deletion, which
are rare). Since it is only a replacement operation for each element,
this process is also O(n).
Analyzing the exact time complexity of the previous algorithm is
challenging because each insertion can involve appending to a node,
pushing data to adjacent nodes, or even splitting nodes. The frequency of
each action is difficult to calculate. The worst-case scenario for a
single insertion is when the tree undergoes splitting at every level. If
we consider each insertion as the worst-case scenario, we can determine
that the upper bound of the time complexity is O(n*log(n)), although this
is a loose upper bound. However, based on the test data, it appears that
the actual time complexity is likely to be O(n).
As the entire maple tree is duplicated using __mt_dup(), if dup_mmap()
fails, there will be a portion of VMAs that have not been duplicated in
the maple tree. To handle this, we mark the failure point with
XA_ZERO_ENTRY. In exit_mmap(), if this marker is encountered, stop
releasing VMAs that have not been duplicated after this point.
There is a "spawn" in byte-unixbench[1], which can be used to test the
performance of fork(). I modified it slightly to make it work with
different number of VMAs.
Below are the test results. The first row shows the number of VMAs. The
second and third rows show the number of fork() calls per ten seconds,
corresponding to next-20231006 and the this patchset, respectively. The
test results were obtained with CPU binding to avoid scheduler load
balancing that could cause unstable results. There are still some
fluctuations in the test results, but at least they are better than the
original performance.
21 121 221 421 821 1621 3221 6421 12821 25621 51221
112100 76261 54227 34035 20195 11112 6017 3161 1606 802 393
114558 83067 65008 45824 28751 16072 8922 4747 2436 1233 599
2.19% 8.92% 19.88% 34.64% 42.37% 44.64% 48.28% 50.17% 51.68% 53.74% 52.42%
[1] https://github.com/kdlucas/byte-unixbench/tree/master
Link: https://lkml.kernel.org/r/20231027033845.90608-11-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Demotion will migrate pages across nodes. Previously, only the global
demotion statistics were accounted for. Changed them to per-node
statistics, making it easier to observe where demotion occurs on each
node.
This will help to identify which nodes are under pressure.
This patch also make pgdemote_* behind CONFIG_NUMA_BALANCING, since
demotion is not available for !CONFIG_NUMA_BALANCING
With this patch, here is a sample where node0 node1 are DRAM,
node3 is PMEM:
Global stats:
$ grep demote /proc/vmstat
pgdemote_kswapd 254288
pgdemote_direct 113497
pgdemote_khugepaged 0
Per-node stats:
$ grep demote /sys/devices/system/node/node0/vmstat # demotion source
pgdemote_kswapd 68454
pgdemote_direct 83431
pgdemote_khugepaged 0
$ grep demote /sys/devices/system/node/node1/vmstat # demotion source
pgdemote_kswapd 185834
pgdemote_direct 30066
pgdemote_khugepaged 0
$ grep demote /sys/devices/system/node/node3/vmstat # demotion target
pgdemote_kswapd 0
pgdemote_direct 0
pgdemote_khugepaged 0
Link: https://lkml.kernel.org/r/20231103031450.1456523-1-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When no corresponding memory region is found for the given pfn, return
NUMA_NO_NODE instead of -1. This improves code readability and aligns with
the existing logic of the memblock_search_pfn_nid() function's user.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Link: https://lore.kernel.org/r/20231207131001.224914-1-ytcoode@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Currently we have a single function slab_free() handling both single
object freeing and bulk freeing with necessary hooks, the latter case
requiring slab_free_freelist_hook(). It should be however better to
distinguish the two use cases for the following reasons:
- code simpler to follow for the single object case
- better code generation - although inlining should eliminate the
slab_free_freelist_hook() for single object freeing in case no
debugging options are enabled, it seems it's not perfect. When e.g.
KASAN is enabled, we're imposing additional unnecessary overhead for
single object freeing.
- preparation to add percpu array caches in near future
Therefore, simplify slab_free() for the single object case by dropping
unnecessary parameters and calling only slab_free_hook() instead of
slab_free_freelist_hook(). Rename the bulk variant to slab_free_bulk()
and adjust callers accordingly.
While at it, flip (and document) slab_free_hook() return value so that
it returns true when the freeing can proceed, which matches the logic of
slab_free_freelist_hook() and is not confusingly the opposite.
Additionally we can simplify a bit by changing the tail parameter of
do_slab_free() when freeing a single object - instead of NULL we can set
it equal to head.
bloat-o-meter shows small code reduction with a .config that has KASAN
etc disabled:
add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-118 (-118)
Function old new delta
kmem_cache_alloc_bulk 1203 1196 -7
kmem_cache_free 861 835 -26
__kmem_cache_free 741 704 -37
kmem_cache_free_bulk 911 863 -48
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Currently, when __kmem_cache_alloc_bulk() fails, it frees back the
objects that were allocated before the failure, using
kmem_cache_free_bulk(). Because kmem_cache_free_bulk() calls the free
hooks (KASAN etc.) and those expect objects that were processed by the
post alloc hooks, slab_post_alloc_hook() is called before
kmem_cache_free_bulk().
This is wasteful, although not a big concern in practice for the rare
error path. But in order to efficiently handle percpu array batch refill
and free in the near future, we will also need a variant of
kmem_cache_free_bulk() that avoids the free hooks. So introduce it now
and use it for the failure path.
In case of failure we however still need to perform memcg uncharge so
handle that in a new memcg_slab_alloc_error_hook(). Thanks to Chengming
Zhou for noticing the missing uncharge.
As a consequence, __kmem_cache_alloc_bulk() no longer needs the objcg
parameter, remove it.
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The SLUB sysfs stats enabled CONFIG_SLUB_STATS have two deficiencies
identified wrt bulk alloc/free operations:
- Bulk allocations from cpu freelist are not counted. Add the
ALLOC_FASTPATH counter there.
- Bulk fastpath freeing will count a list of multiple objects with a
single FREE_FASTPATH inc. Add a stat_add() variant to count them all.
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Now, if we suddenly remove a PMEM device(by calling unbind) which
contains FSDAX while programs are still accessing data in this device,
e.g.:
```
$FSSTRESS_PROG -d $SCRATCH_MNT -n 99999 -p 4 &
# $FSX_PROG -N 1000000 -o 8192 -l 500000 $SCRATCH_MNT/t001 &
echo "pfn1.1" > /sys/bus/nd/drivers/nd_pmem/unbind
```
it could come into an unacceptable state:
1. device has gone but mount point still exists, and umount will fail
with "target is busy"
2. programs will hang and cannot be killed
3. may crash with NULL pointer dereference
To fix this, we introduce a MF_MEM_PRE_REMOVE flag to let it know that we
are going to remove the whole device, and make sure all related processes
could be notified so that they could end up gracefully.
This patch is inspired by Dan's "mm, dax, pmem: Introduce
dev_pagemap_failure()"[1]. With the help of dax_holder and
->notify_failure() mechanism, the pmem driver is able to ask filesystem
on it to unmap all files in use, and notify processes who are using
those files.
Call trace:
trigger unbind
-> unbind_store()
-> ... (skip)
-> devres_release_all()
-> kill_dax()
-> dax_holder_notify_failure(dax_dev, 0, U64_MAX, MF_MEM_PRE_REMOVE)
-> xfs_dax_notify_failure()
`-> freeze_super() // freeze (kernel call)
`-> do xfs rmap
` -> mf_dax_kill_procs()
` -> collect_procs_fsdax() // all associated processes
` -> unmap_and_kill()
` -> invalidate_inode_pages2_range() // drop file's cache
`-> thaw_super() // thaw (both kernel & user call)
Introduce MF_MEM_PRE_REMOVE to let filesystem know this is a remove
event. Use the exclusive freeze/thaw[2] to lock the filesystem to prevent
new dax mapping from being created. Do not shutdown filesystem directly
if configuration is not supported, or if failure range includes metadata
area. Make sure all files and processes(not only the current progress)
are handled correctly. Also drop the cache of associated files before
pmem is removed.
[1]: https://lore.kernel.org/linux-mm/161604050314.1463742.14151665140035795571.stgit@dwillia2-desk3.amr.corp.intel.com/
[2]: https://lore.kernel.org/linux-xfs/169116275623.3187159.16862410128731457358.stg-ugh@frogsfrogsfrogs/
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
If a scheme is set to not applied to any monitoring target region for any
reasons including the target access pattern, quota, filters, or
watermarks, writing 'update_schemes_tried_regions' to 'state' DAMON sysfs
file can indefinitely hang. Fix the case by implementing a timeout for
the operation. The time limit is two apply intervals of each scheme.
Link: https://lkml.kernel.org/r/20231124213840.39157-1-sj@kernel.org
Fixes: 4d4e41b682 ("mm/damon/sysfs-schemes: do not update tried regions more than one DAMON snapshot")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
PTE_MARKER_UFFD_WP is a subconfig for userfaultfd. To make it clear,
switch to use menuconfig for userfaultfd.
Link: https://lkml.kernel.org/r/20231123224204.1060152-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Regions split function ('damon_split_region_at()') is called at the
beginning of an aggregation interval, and when DAMOS applying the actions
and charging quota. Because 'nr_accesses' fields of all regions are reset
at the beginning of each aggregation interval, and DAMOS was applying the
action at the end of each aggregation interval, there was no need to copy
the 'nr_accesses' field to the split-out region.
However, commit 42f994b714 ("mm/damon/core: implement scheme-specific
apply interval") made DAMOS applies action on its own timing interval.
Hence, 'nr_accesses' should also copied to split-out regions, but the
commit didn't. Fix it by copying it.
Link: https://lkml.kernel.org/r/20231119171529.66863-1-sj@kernel.org
Fixes: 42f994b714 ("mm/damon/core: implement scheme-specific apply interval")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In add_memory_resource(), creation of memory block devices occurs after
successful call to arch_add_memory(). However, creation of memory block
devices could fail. In that case, arch_remove_memory() is called to
perform necessary cleanup.
Currently with or without altmap support, arch_remove_memory() is always
passed with altmap set to NULL during error handling. This leads to
freeing of struct pages using free_pages(), eventhough the allocation
might have been performed with altmap support via
altmap_alloc_block_buf().
Fix the error handling by passing altmap in arch_remove_memory(). This
ensures the following:
* When altmap is disabled, deallocation of the struct pages array occurs
via free_pages().
* When altmap is enabled, deallocation occurs via vmem_altmap_free().
Link: https://lkml.kernel.org/r/20231120145354.308999-3-sumanthk@linux.ibm.com
Fixes: a08a2ae346 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
From Documentation/core-api/memory-hotplug.rst:
When adding/removing/onlining/offlining memory or adding/removing
heterogeneous/device memory, we should always hold the mem_hotplug_lock
in write mode to serialise memory hotplug (e.g. access to global/zone
variables).
mhp_(de)init_memmap_on_memory() functions can change zone stats and
struct page content, but they are currently called w/o the
mem_hotplug_lock.
When memory block is being offlined and when kmemleak goes through each
populated zone, the following theoretical race conditions could occur:
CPU 0: | CPU 1:
memory_offline() |
-> offline_pages() |
-> mem_hotplug_begin() |
... |
-> mem_hotplug_done() |
| kmemleak_scan()
| -> get_online_mems()
| ...
-> mhp_deinit_memmap_on_memory() |
[not protected by mem_hotplug_begin/done()]|
Marks memory section as offline, | Retrieves zone_start_pfn
poisons vmemmap struct pages and updates | and struct page members.
the zone related data |
| ...
| -> put_online_mems()
Fix this by ensuring mem_hotplug_lock is taken before performing
mhp_init_memmap_on_memory(). Also ensure that
mhp_deinit_memmap_on_memory() holds the lock.
online/offline_pages() are currently only called from
memory_block_online/offline(), so it is safe to move the locking there.
Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com
Fixes: a08a2ae346 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
syzbot reports oops in lockdep's __lock_acquire(), called from
__pte_offset_map_lock() called from filemap_map_pages(); or when I run the
repro, the oops comes in pmd_install(), called from filemap_map_pmd()
called from filemap_map_pages(), just before the __pte_offset_map_lock().
The problem is that filemap_map_pmd() has been assuming that when it finds
pmd_none(), a page table has already been prepared in prealloc_pte; and
indeed do_fault_around() has been careful to preallocate one there, when
it finds pmd_none(): but what if *pmd became none in between?
My 6.6 mods in mm/khugepaged.c, avoiding mmap_lock for write, have made it
easy for *pmd to be cleared while servicing a page fault; but even before
those, a huge *pmd might be zapped while a fault is serviced.
The difference in symptomatic stack traces comes from the "memory model"
in use: pmd_install() uses pmd_populate() uses page_to_pfn(): in some
models that is strict, and will oops on the NULL prealloc_pte; in other
models, it will construct a bogus value to be populated into *pmd, then
__pte_offset_map_lock() oops when trying to access split ptlock pointer
(or some other symptom in normal case of ptlock embedded not pointer).
Link: https://lore.kernel.org/linux-mm/20231115065506.19780-1-jose.pekkarinen@foxhound.fi/
Link: https://lkml.kernel.org/r/6ed0c50c-78ef-0719-b3c5-60c0c010431c@google.com
Fixes: f9ce0be71d ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-and-tested-by: syzbot+89edd67979b52675ddec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/0000000000005e44550608a0806c@google.com/
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>,
Cc: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org> [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
set_track_prepare() will call __alloc_pages() which attempts to acquire
zone->lock(spinlocks), so move it outside object->lock(raw_spinlocks)
because it's not right to acquire spinlocks while holding raw_spinlocks in
RT mode.
Link: https://lkml.kernel.org/r/20231115082138.2649870-3-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix invalid wait context of set_track_prepare()".
Geert reported an invalid wait context[1] which is resulted by moving
set_track_prepare() inside kmemleak_lock. This is not allowed because in
RT mode, the spinlocks can be preempted but raw_spinlocks can not, so it
is not allowd to acquire spinlocks while holding raw_spinlocks. The
second patch fix same problem in kmemleak_update_trace().
This patch (of 2):
Move the initialisation of object back to__alloc_object() because
set_track_prepare() attempt to acquire zone->lock(spinlocks) while
__link_object is holding kmemleak_lock(raw_spinlocks). This is not right
for RT mode.
This reverts commit 245245c2ff ("mm/kmemleak: move the initialisation
of object to __link_object").
Link: https://lkml.kernel.org/r/20231115082138.2649870-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20231115082138.2649870-2-liushixin2@huawei.com
Fixes: 245245c2ff ("mm/kmemleak: move the initialisation of object to __link_object")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/linux-mm/CAMuHMdWj0UzwNaxUvcocTfh481qRJpOWwXxsJCTJfu1oCqvgdA@mail.gmail.com/ [1]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We have a report of this WARN() triggering. Let's print the offending
swp_entry_t to help diagnosis.
Link: https://lkml.kernel.org/r/000000000000b0e576060a30ee3b@google.com
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The routine __vma_private_lock tests for the existence of a reserve map
associated with a private hugetlb mapping. A pointer to the reserve map
is in vma->vm_private_data. __vma_private_lock was checking the pointer
for NULL. However, it is possible that the low bits of the pointer could
be used as flags. In such instances, vm_private_data is not NULL and not
a valid pointer. This results in the null-ptr-deref reported by syzbot:
general protection fault, probably for non-canonical address 0xdffffc000000001d:
0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
CPU: 0 PID: 5048 Comm: syz-executor139 Not tainted 6.6.0-rc7-syzkaller-00142-g88
8cf78c29e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 1
0/09/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5004
...
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5753 [inline]
lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5718
down_write+0x93/0x200 kernel/locking/rwsem.c:1573
hugetlb_vma_lock_write mm/hugetlb.c:300 [inline]
hugetlb_vma_lock_write+0xae/0x100 mm/hugetlb.c:291
__hugetlb_zap_begin+0x1e9/0x2b0 mm/hugetlb.c:5447
hugetlb_zap_begin include/linux/hugetlb.h:258 [inline]
unmap_vmas+0x2f4/0x470 mm/memory.c:1733
exit_mmap+0x1ad/0xa60 mm/mmap.c:3230
__mmput+0x12a/0x4d0 kernel/fork.c:1349
mmput+0x62/0x70 kernel/fork.c:1371
exit_mm kernel/exit.c:567 [inline]
do_exit+0x9ad/0x2a20 kernel/exit.c:861
__do_sys_exit kernel/exit.c:991 [inline]
__se_sys_exit kernel/exit.c:989 [inline]
__x64_sys_exit+0x42/0x50 kernel/exit.c:989
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Mask off low bit flags before checking for NULL pointer. In addition, the
reserve map only 'belongs' to the OWNER (parent in parent/child
relationships) so also check for the OWNER flag.
Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com
Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/00000000000078d1e00608d7878b@google.com/
Fixes: bf4916922c ("hugetlbfs: extend hugetlb_vma_lock to private VMAs")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Inspection of kmem_cache_free() disassembly showed we could make the
fast path smaller by providing few more hints to the compiler, and
splitting the memcg_slab_free_hook() into an inline part that only
checks if there's work to do, and an out of line part doing the actual
uncharge.
bloat-o-meter results:
add/remove: 2/0 grow/shrink: 0/3 up/down: 286/-554 (-268)
Function old new delta
__memcg_slab_free_hook - 270 +270
__pfx___memcg_slab_free_hook - 16 +16
kfree 828 665 -163
kmem_cache_free 1116 948 -168
kmem_cache_free_bulk.part 1701 1478 -223
Checking kmem_cache_free() disassembly now shows the non-fastpath
cases are handled out of line, which should reduce instruction cache
usage.
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
With allocation fastpaths no longer divided between two .c files, we
have better inlining, however checking the disassembly of
kmem_cache_alloc() reveals we can do better to make the fastpaths
smaller and move the less common situations out of line or to separate
functions, to reduce instruction cache pressure.
- split memcg pre/post alloc hooks to inlined checks that use likely()
to assume there will be no objcg handling necessary, and non-inline
functions doing the actual handling
- add some more likely/unlikely() to pre/post alloc hooks to indicate
which scenarios should be out of line
- change gfp_allowed_mask handling in slab_post_alloc_hook() so the
code can be optimized away when kasan/kmsan/kmemleak is configured out
bloat-o-meter shows:
add/remove: 4/2 grow/shrink: 1/8 up/down: 521/-2924 (-2403)
Function old new delta
__memcg_slab_post_alloc_hook - 461 +461
kmem_cache_alloc_bulk 775 791 +16
__pfx_should_failslab.constprop - 16 +16
__pfx___memcg_slab_post_alloc_hook - 16 +16
should_failslab.constprop - 12 +12
__pfx_memcg_slab_post_alloc_hook 16 - -16
kmem_cache_alloc_lru 1295 1023 -272
kmem_cache_alloc_node 1118 817 -301
kmem_cache_alloc 1076 772 -304
kmalloc_node_trace 1149 838 -311
kmalloc_trace 1102 789 -313
__kmalloc_node_track_caller 1393 1080 -313
__kmalloc_node 1397 1082 -315
__kmalloc 1374 1059 -315
memcg_slab_post_alloc_hook 464 - -464
Note that gcc still decided to inline __memcg_pre_alloc_hook(), but the
code is out of line. Forcing noinline did not improve the results. As a
result the fastpaths are shorter and overal code size is reduced.
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
slab_alloc() is a thin wrapper around slab_alloc_node() with only one
caller. Replace with direct call of slab_alloc_node().
__kmem_cache_alloc_lru() itself is a thin wrapper with two callers,
so replace it with direct calls of slab_alloc_node() and
trace_kmem_cache_alloc().
This also makes sure _RET_IP_ has always the expected value and not
depending on inlining decisions.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
This will eliminate a call between compilation units through
__kmem_cache_alloc_node() and allow better inlining of the allocation
fast path.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
In preparation for the next patch, move the kmalloc_slab() function to
the header, as it will have callers from two files, and make it inline.
To avoid unnecessary bloat, remove all size checks/warnings from
kmalloc_slab() as they just duplicate those in callers, especially after
recent changes to kmalloc_size_roundup(). We just need to adjust handling
of zero size in __do_kmalloc_node(). Also we can stop handling NULL
result from kmalloc_slab() there as that now cannot happen (unless
called too early during boot).
The size_index array becomes visible so rename it to a more specific
kmalloc_size_index.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
This should result in better code. Currently kfree() makes a function
call between compilation units to __kmem_cache_free() which does its own
virt_to_slab(), throwing away the struct slab pointer we already had in
kfree(). Now it can be reused. Additionally kfree() can now inline the
whole SLUB freeing fastpath.
Also move over free_large_kmalloc() as the only callsites are now in
slub.c, and make it static.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The declaration and associated helpers are not used anywhere else
anymore.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
We don't share those between SLAB and SLUB anymore, so most memcg
related functions can be moved to slub.c proper.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
We don't share the hooks between two slab implementations anymore so
they can be moved away from the header. As part of the move, also move
should_failslab() from slab_common.c as the pre_alloc hook uses it.
This means slab.h can stop including fault-inject.h and kmemleak.h.
Fix up some files that were depending on the includes transitively.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The #include's are scattered at several places of the file, but it does
not seem this is needed to prevent any include loops (anymore?) so
consolidate them at the top. Also move the misplaced kmem_cache_init()
declaration away from the top.
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
mm/slab.h is the only place to include include/linux/slub_def.h which
has allowed switching between SLAB and SLUB. Now we can simply move the
contents over and remove slub_def.h.
Use this opportunity to fix up some whitespace (alignment) issues.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Nothing outside SLUB itself accesses the struct kmem_cache_cpu fields so
it does not need to be declared in slub_def.h. This allows also to move
enum stat_item.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
CONFIG_DEBUG_SLAB is going away with CONFIG_SLAB, so remove dead ifdefs
in mempool and dmapool code.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
In slab_common.c and slab.h headers, we can now remove all code behind
CONFIG_SLAB and CONFIG_DEBUG_SLAB ifdefs, and remove all CONFIG_SLUB
ifdefs.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
With SLAB removed, these are never true anymore so we can clean up.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Some struct slab fields are initialized differently for SLAB and SLUB so
we can simplify with SLUB being the only remaining allocator.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
With SLAB removed and SLUB the only remaining allocator, we can clean up
some code that was depending on the choice.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Remove CONFIG_SLAB, CONFIG_DEBUG_SLAB, CONFIG_SLAB_DEPRECATED and
everything in Kconfig files and mm/Makefile that depends on those. Since
SLUB is the only remaining allocator, remove the allocator choice, make
CONFIG_SLUB a "def_bool y" for now and remove all explicit dependencies
on SLUB or SLAB as it's now always enabled. Make every option's verbose
name and description refer to "the slab allocator" without refering to
the specific implementation. Do not rename the CONFIG_ option names yet.
Everything under #ifdef CONFIG_SLAB, and mm/slab.c is now dead code, all
code under #ifdef CONFIG_SLUB is now always compiled.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The SLAB implementation is going to be removed, and mm-api.rst currently
uses mm/slab.c to obtain kerneldocs for some API functions. Switch it to
mm/slub.c and move the relevant kerneldocs of exported functions from
one to the other. The rest of kerneldocs in slab.c is for static SLAB
implementation-specific functions that don't have counterparts in slub.c
and thus can be simply removed with the implementation.
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The current updated scheme (which this series implemented) is:
- node partial slabs: PG_Workingset && !frozen
- cpu partial slabs: !PG_Workingset && !frozen
- cpu slabs: !PG_Workingset && frozen
- full slabs: !PG_Workingset && !frozen
The most important change is that "frozen" bit is not set for the
cpu partial slabs anymore, __slab_free() will grab node list_lock
then check by !PG_Workingset that it's not on a node partial list.
And the "frozen" bit is still kept for the cpu slabs for performance,
since we don't need to grab node list_lock to check whether the
PG_Workingset is set or not if the "frozen" bit is set in __slab_free().
Update related documentations and comments in the source.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Christoph Lameter (Ampere) <cl@linux.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Since all partial slabs on the CPU partial list are not frozen anymore,
we don't unfreeze when moving cpu partial slabs to node partial list,
it's better to rename these functions.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Since the introduce of unfrozen slabs on cpu partial list, we don't
need to synchronize the slab frozen state under the node list_lock.
The caller of deactivate_slab() and the caller of __slab_free() won't
manipulate the slab list concurrently.
So we can get node list_lock in the last stage if we really need to
manipulate the slab list in this path.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Now we will freeze slabs when moving them out of node partial list to
cpu partial list, this method needs two cmpxchg_double operations:
1. freeze slab (acquire_slab()) under the node list_lock
2. get_freelist() when pick used in ___slab_alloc()
Actually we don't need to freeze when moving slabs out of node partial
list, we can delay freezing to when use slab freelist in ___slab_alloc(),
so we can save one cmpxchg_double().
And there are other good points:
- The moving of slabs between node partial list and cpu partial list
becomes simpler, since we don't need to freeze or unfreeze at all.
- The node list_lock contention would be less, since we don't need to
freeze any slab under the node list_lock.
We can achieve this because there is no concurrent path would manipulate
the partial slab list except the __slab_free() path, which is now
serialized by slab_test_node_partial() under the list_lock.
Since the slab returned by get_partial() interfaces is not frozen anymore
and no freelist is returned in the partial_context, so we need to use the
introduced freeze_slab() to freeze it and get its freelist.
Similarly, the slabs on the CPU partial list are not frozen anymore,
we need to freeze_slab() on it before use.
We can now delete acquire_slab() as it became unused.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
We will have unfrozen slabs out of the node partial list later, so we
need a freeze_slab() function to freeze the partial slab and get its
freelist.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Now the partially empty slub will be frozen when taken out of node partial
list, so the __slab_free() will know from "was_frozen" that the partially
empty slab is not on node partial list and is a cpu or cpu partial slab
of some cpu.
But we will change this, make partial slabs leave the node partial list
with unfrozen state, so we need to change __slab_free() to use the new
slab_test_node_partial() we just introduced.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Ever since the eventfd type was introduced back in 2007 in commit
e1ad7468c7 ("signal/timer/event: eventfd core") the eventfd_signal()
function only ever passed 1 as a value for @n. There's no point in
keeping that additional argument.
Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-2-bd549b14ce0c@kernel.org
Acked-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Acked-by: Eric Farman <farman@linux.ibm.com> # s390
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pages belonging to a page_pool (PP) instance must be freed through the
PP APIs in-order to correctly release any DMA mappings and release
refcnt on the DMA device when freeing PP instance. When PP release a
page (page_pool_release_page) the page->pp_magic value is cleared.
This patch detect a leaked PP page in free_page_is_bad() via
unexpected state of page->pp_magic value being PP_SIGNATURE.
We choose to report and treat it as a bad page. It would be possible
to release the page via returning it to the PP instance as the
page->pp pointer is likely still valid.
Notice this code is only activated when either compiled with
CONFIG_DEBUG_VM or boot cmdline debug_pagealloc=on, and
CONFIG_PAGE_POOL.
Reduced example output of leak with PP_SIGNATURE = dead000000000040:
BUG: Bad page state in process swapper/4 pfn:141fa6
page:000000006dbf8062 refcount:0 mapcount:0 mapping:0000000000000000 index:0x141fa6000 pfn:0x141fa6
flags: 0x2fffff80000000(node=0|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 002fffff80000000 dead000000000040 ffff88814888a000 0000000000000000
raw: 0000000141fa6000 0000000000000001 00000000ffffffff 0000000000000000
page dumped because: page_pool leak
[...]
Call Trace:
<IRQ>
dump_stack_lvl+0x32/0x50
bad_page+0x70/0xf0
free_unref_page_prepare+0x263/0x430
free_unref_page+0x34/0x130
mlx5e_free_rx_mpwqe+0x190/0x1c0 [mlx5_core]
mlx5e_post_rx_mpwqes+0x1ac/0x280 [mlx5_core]
mlx5e_napi_poll+0x12b/0x710 [mlx5_core]
? skb_free_head+0x4f/0x90
__napi_poll+0x2b/0x1c0
net_rx_action+0x27b/0x360
The advantage is the Call Trace directly points to the function
leaking the PP page, which in this case is an on purpose bug
introduced into the mlx5 driver to test this code change.
Currently PP will periodically in page_pool_release_retry()
printk warning "stalled pool shutdown" which cannot be directly
corrolated to leaking and might as well be a false positive
due to SKBs being stuck on a socket for an extended period.
After this patch we should be able to remove this printk.
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZWBq0gAKCRCRxhvAZXjc
ot4EAP48O5ExMtQ3/AIkNDo+/9/Iz4g7bE1HYmdyiMPO3Ou/uwEAySwBXRJrFAsS
9omvkEdqrfyguW0xgoYwcxBdATVHnAE=
=ScR3
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Avoid calling back into LSMs from vfs_getattr_nosec() calls.
IMA used to query inode properties accessing raw inode fields without
dedicated helpers. That was finally fixed a few releases ago by
forcing IMA to use vfs_getattr_nosec() helpers.
The goal of the vfs_getattr_nosec() helper is to query for attributes
without calling into the LSM layer which would be quite problematic
because incredibly IMA is called from __fput()...
__fput()
-> ima_file_free()
What it does is to call back into the filesystem to update the file's
IMA xattr. Querying the inode without using vfs_getattr_nosec() meant
that IMA didn't handle stacking filesystems such as overlayfs
correctly. So the switch to vfs_getattr_nosec() is quite correct. But
the switch to vfs_getattr_nosec() revealed another bug when used on
stacking filesystems:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
-> security_inode_getattr() # calls back into LSMs
Now, if that __fput() happens from task_work_run() of an exiting task
current->fs and various other pointer could already be NULL. So
anything in the LSM layer relying on that not being NULL would be
quite surprised.
Fix that by passing the information that this is a security request
through to the stacking filesystem by adding a new internal
ATT_GETATTR_NOSEC flag. Now the callchain becomes:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> if (AT_GETATTR_NOSEC)
vfs_getattr_nosec()
else
vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
- Fix a bug introduced with the iov_iter rework from last cycle.
This broke /proc/kcore by copying too much and without the correct
offset.
- Add a missing NULL check when allocating the root inode in
autofs_fill_super().
- Fix stable writes for multi-device filesystems (xfs, btrfs etc) and
the block device pseudo filesystem.
Stable writes used to be a superblock flag only, making it a per
filesystem property. Add an additional AS_STABLE_WRITES mapping flag
to allow for fine-grained control.
- Ensure that offset_iterate_dir() returns 0 after reaching the end of
a directory so it adheres to getdents() convention.
* tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: getdents() should return 0 after reaching EOD
xfs: respect the stable writes flag on the RT device
xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags
block: update the stable_writes flag in bdev_add
filemap: add a per-mapping stable writes flag
autofs: add: new_inode check in autofs_fill_super()
iov_iter: fix copy_page_to_iter_nofault()
fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
Now we rely on the "frozen" bit to see if we should manipulate the
slab->slab_list, which will be changed in the following patch.
Instead we introduce another way to keep track of whether slub is on
the per-node partial list, here we reuse the PG_workingset bit.
We have to use the atomic set_bit() and clear_bit() variants and change
slab_unlock() to bit_spin_unlock() because when cmpxchg is not available
and PG_lock is used, there may be concurrent operations on the two bits.
Thanks to Mark Brown for reporting a hang and testing of a previous
version where the non-atomic operations were used.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
It is hard to find where mapping->private_lock, mapping->private_list and
mapping->private_data are used, due to private_XXX being a relatively
common name for variables and structure members in the kernel. To fit
with other members of struct address_space, rename them all to have an
i_ prefix. Tested with an allmodconfig build.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20231117215823.2821906-1-willy@infradead.org
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
folio_wait_stable waits for writeback to finish before modifying the
contents of a folio again, e.g. to support check summing of the data
in the block integrity code.
Currently this behavior is controlled by the SB_I_STABLE_WRITES flag
on the super_block, which means it is uniform for the entire file system.
This is wrong for the block device pseudofs which is shared by all
block devices, or file systems that can use multiple devices like XFS
witht the RT subvolume or btrfs (although btrfs currently reimplements
folio_wait_stable anyway).
Add a per-address_space AS_STABLE_WRITES flag to control the behavior
in a more fine grained way. The existing SB_I_STABLE_WRITES is kept
to initialize AS_STABLE_WRITES to the existing default which covers
most cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-2-hch@lst.de
Tested-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit c33c794828 ("mm: ptep_get() conversion") converted all (non-arch)
call sites to use ptep_get() instead of doing a direct dereference of the
pte. Full rationale can be found in that commit's log.
Since then, three new call sites have snuck in, which directly dereference
the pte, so let's fix those up.
Unfortunately there is no reliable automated mechanism to catch these; I'm
relying on a combination of Coccinelle (which throws up a lot of false
positives) and some compiler magic to force a compiler error on
dereference (While this approach finds dereferences, it also yields a
non-booting kernel so can't be committed).
Link: https://lkml.kernel.org/r/20231114154945.490401-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matoro reported various userspace crashes on the parisc platform with kernel
6.6 and bisected it to commit 3033cd4307 ("parisc: Use generic mmap top-down
layout and brk randomization").
That commit switched parisc to use the common infrastructure to calculate
mmap_base, but missed that the mmap_base() function takes care for
architectures where the stack grows downwards only.
Fix the mmap_base() calculation to include the stack-grows-upwards case
and thus fix the userspace crashes on parisc.
Link: https://lkml.kernel.org/r/ZVH2qeS1bG7/1J/l@p100
Fixes: 3033cd4307 ("parisc: Use generic mmap top-down layout and brk randomization")
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function '__damos_filter_out()' causes DAMON to always filter out
schemes whose filter type is anon or memcg if its matching value is set
to false.
This commit addresses the issue by ensuring that '__damos_filter_out()'
no longer applies to filters whose type is 'anon' or 'memcg'.
Link: https://lkml.kernel.org/r/1699594629-3816-1-git-send-email-hyeongtak.ji@gmail.com
Fixes: ab9bda001b ("mm/damon/core: introduce address range type damos filter")
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Objcg vectors attached to slab pages to store slab object ownership
information are allocated using gfp flags for the original slab
allocation. Depending on slab page order and the size of slab objects,
objcg vector can take several pages.
If the original allocation was done with the __GFP_NOFAIL flag, it
triggered a warning in the page allocation code. Indeed, order > 1 pages
should not been allocated with the __GFP_NOFAIL flag.
Fix this by simply dropping the __GFP_NOFAIL flag when allocating the
objcg vector. It effectively allows to skip the accounting of a single
slab object under a heavy memory pressure.
An alternative would be to implement the mechanism to fallback to order-0
allocations for accounting metadata, which is also not perfect because it
will increase performance penalty and memory footprint of the kernel
memory accounting under memory pressure.
Link: https://lkml.kernel.org/r/ZUp8ZFGxwmCx4ZFr@P9FQF9L96D.corp.robot.car
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: Christoph Lameter <cl@linux.com>
Closes: https://lkml.kernel.org/r/6b42243e-f197-600a-5d22-56bd728a5ad8@gentwo.org
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface's before_damos_apply callback
(damon_sysfs_before_damos_apply()), which creates the DAMOS tried regions
for each DAMOS action applied region, is not handling the allocation
failure for the sysfs directory data. As a result, NULL pointer
derefeence is possible. Fix it by handling the case.
Link: https://lkml.kernel.org/r/20231106233408.51159-4-sj@kernel.org
Fixes: f1d13cacab ("mm/damon/sysfs: implement DAMOS tried regions update command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS tried regions sysfs directory allocation function
(damon_sysfs_scheme_regions_alloc()) is not handling the memory allocation
failure. In the case, the code will dereference NULL pointer. Handle the
failure to avoid such invalid access.
Link: https://lkml.kernel.org/r/20231106233408.51159-3-sj@kernel.org
Fixes: 9277d0367b ("mm/damon/sysfs-schemes: implement scheme region directory")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/sysfs: fix unhandled return values".
Some of DAMON sysfs interface code is not handling return values from some
functions. As a result, confusing user input handling or NULL-dereference
is possible. Check those properly.
This patch (of 3):
damon_sysfs_update_target() returns error code for failures, but its
caller, damon_sysfs_set_targets() is ignoring that. The update function
seems making no critical change in case of such failures, but the behavior
will look like DAMON sysfs is silently ignoring or only partially
accepting the user input. Fix it.
Link: https://lkml.kernel.org/r/20231106233408.51159-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231106233408.51159-2-sj@kernel.org
Fixes: 19467a950b ("mm/damon/sysfs: remove requested targets when online-commit inputs")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While qualifiying the 6.4 release, the following warning was detected in
messages:
vmstat_refresh: nr_file_hugepages -15664
The warning is caused by the incorrect updating of the NR_FILE_THPS
counter in the function split_huge_page_to_list. The if case is checking
for folio_test_swapbacked, but the else case is missing the check for
folio_test_pmd_mappable. The other functions that manipulate the counter
like __filemap_add_folio and filemap_unaccount_folio have the
corresponding check.
I have a test case, which reproduces the problem. It can be found here:
https://github.com/sroeschus/testcase/blob/main/vmstat_refresh/madv.c
The test case reproduces on an XFS filesystem. Running the same test
case on a BTRFS filesystem does not reproduce the problem.
AFAIK version 6.1 until 6.6 are affected by this problem.
[akpm@linux-foundation.org: whitespace fix]
[shr@devkernel.io: test for folio_test_pmd_mappable()]
Link: https://lkml.kernel.org/r/20231108171517.2436103-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20231106181918.1091043-1-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Co-debugged-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The "err" variable is not initialized if damon_target_has_pid(ctx) is
false and sys_target->regions->nr is zero.
Link: https://lkml.kernel.org/r/739e6aaf-a634-4e33-98a8-16546379ec9f@moroto.mountain
Fixes: 0bcd216c4741 ("mm/damon/sysfs: update monitoring target regions for online input commit")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce several new KVM uAPIs to ultimately create a guest-first memory
subsystem within KVM, a.k.a. guest_memfd. Guest-first memory allows KVM
to provide features, enhancements, and optimizations that are kludgly
or outright impossible to implement in a generic memory subsystem.
The core KVM ioctl() for guest_memfd is KVM_CREATE_GUEST_MEMFD, which
similar to the generic memfd_create(), creates an anonymous file and
returns a file descriptor that refers to it. Again like "regular"
memfd files, guest_memfd files live in RAM, have volatile storage,
and are automatically released when the last reference is dropped.
The key differences between memfd files (and every other memory subystem)
is that guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
convert a guest memory area between the shared and guest-private states.
A second KVM ioctl(), KVM_SET_MEMORY_ATTRIBUTES, allows userspace to
specify attributes for a given page of guest memory. In the long term,
it will likely be extended to allow userspace to specify per-gfn RWX
protections, including allowing memory to be writable in the guest
without it also being writable in host userspace.
The immediate and driving use case for guest_memfd are Confidential
(CoCo) VMs, specifically AMD's SEV-SNP, Intel's TDX, and KVM's own pKVM.
For such use cases, being able to map memory into KVM guests without
requiring said memory to be mapped into the host is a hard requirement.
While SEV+ and TDX prevent untrusted software from reading guest private
data by encrypting guest memory, pKVM provides confidentiality and
integrity *without* relying on memory encryption. In addition, with
SEV-SNP and especially TDX, accessing guest private memory can be fatal
to the host, i.e. KVM must be prevent host userspace from accessing
guest memory irrespective of hardware behavior.
Long term, guest_memfd may be useful for use cases beyond CoCo VMs,
for example hardening userspace against unintentional accesses to guest
memory. As mentioned earlier, KVM's ABI uses userspace VMA protections to
define the allow guest protection (with an exception granted to mapping
guest memory executable), and similarly KVM currently requires the guest
mapping size to be a strict subset of the host userspace mapping size.
Decoupling the mappings sizes would allow userspace to precisely map
only what is needed and with the required permissions, without impacting
guest performance.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to DMA from or into guest memory).
guest_memfd is the result of 3+ years of development and exploration;
taking on memory management responsibilities in KVM was not the first,
second, or even third choice for supporting CoCo VMs. But after many
failed attempts to avoid KVM-specific backing memory, and looking at
where things ended up, it is quite clear that of all approaches tried,
guest_memfd is the simplest, most robust, and most extensible, and the
right thing to do for KVM and the kernel at-large.
The "development cycle" for this version is going to be very short;
ideally, next week I will merge it as is in kvm/next, taking this through
the KVM tree for 6.8 immediately after the end of the merge window.
The series is still based on 6.6 (plus KVM changes for 6.7) so it
will require a small fixup for changes to get_file_rcu() introduced in
6.7 by commit 0ede61d858 ("file: convert to SLAB_TYPESAFE_BY_RCU").
The fixup will be done as part of the merge commit, and most of the text
above will become the commit message for the merge.
Pending post-merge work includes:
- hugepage support
- looking into using the restrictedmem framework for guest memory
- introducing a testing mechanism to poison memory, possibly using
the same memory attributes introduced here
- SNP and TDX support
There are two non-KVM patches buried in the middle of this series:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
Add an "unmovable" flag for mappings that cannot be migrated under any
circumstance. KVM will use the flag for its upcoming GUEST_MEMFD support,
which will not support compaction/migration, at least not in the
foreseeable future.
Test AS_UNMOVABLE under folio lock as already done for the async
compaction/dirty folio case, as the mapping can be removed by truncation
while compaction is running. To avoid having to lock every folio with a
mapping, assume/require that unmovable mappings are also unevictable, and
have mapping_set_unmovable() also set AS_UNEVICTABLE.
Cc: Matthew Wilcox <willy@infradead.org>
Co-developed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need all get_partial() related interfaces to return a slab, instead
of returning the freelist (or object).
Use the partial_context.object to return back freelist or object for
now. This patch shouldn't have any functional changes.
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The get_partial() interface used in ___slab_alloc() may return a single
object in the "kmem_cache_debug(s)" case, in which we will just return
the "freelist" object.
Move this handling up to prepare for later changes.
And the "pfmemalloc_match()" part is not needed for node partial slab,
since we already check this in the get_partial_node().
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Numerous memblock reservations at early boot may exhaust static
memblock.reserved array and it is unnoticed because most of the callers don't
check memblock_reserve() return value.
In this case the system will crash later, but the reason is hard to identify.
Replace return of an error with panic() when memblock.reserved is exhausted
before it can be resized.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmVJMC0QHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kZ3CCACgaHmlV5YimQ3le0yGkyoVfA1ZYMTZJiq3
umN9z/Vs/WQLz5yiCriEjG/a9dkaceMtrqON+/Lxu5U28/XdYe13lKAmpmPXQvc4
5iqfXHL3KZSBvzYNKIKZioLdWQWNvIQyGnYn1LBqqtcOCVLscbqatE9JmN2w39ny
TwbTBG7HcalxJ9suauwF+jqQWg2f+yJEOzqiNalNJO0GRxuO7qJdqoLB1zsvXJ9F
3StCBq2/QyeklX5UtDT5oBIldx0ZGccg20hFhNDzN0pipF8lDL7Io2wI5zjhuHWO
JmTCY3GAZ+yl16BKe2StryVxs28PtagLykEq/CdGk56jiyWGUuLI
=xf1W
-----END PGP SIGNATURE-----
Merge tag 'memblock-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock update from Mike Rapoport:
"Report failures when memblock_can_resize is not set.
Numerous memblock reservations at early boot may exhaust static
memblock.reserved array and it is unnoticed because most of the
callers don't check memblock_reserve() return value.
In this case the system will crash later, but the reason is hard to
identify.
Replace return of an error with panic() when memblock.reserved is
exhausted before it can be resized"
* tag 'memblock-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: report failures when memblock_can_resize is not set
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series "Fixes and cleanups to compaction".
- Joel Fernandes has a patchset ("Optimize mremap during mutual
alignment within PMD") which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested.
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series "Do not try to access unaccepted memory" Adrian Hunter
provides some fixups for the recently-added "unaccepted memory' feature.
To increase the feature's checking coverage. "Plug a few gaps where
RAM is exposed without checking if it is unaccepted memory".
- In the series "cleanups for lockless slab shrink" Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code.
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series "use refcount+RCU method to implement
lockless slab shrink".
- David Hildenbrand contributes some maintenance work for the rmap code
in the series "Anon rmap cleanups".
- Kefeng Wang does more folio conversions and some maintenance work in
the migration code. Series "mm: migrate: more folio conversion and
unification".
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series "Add and use bdev_getblk()".
- In the series "Use nth_page() in place of direct struct page
manipulation" Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames.
- In the series "mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO" has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of gigantic
pages are in use.
- Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
rationalization and folio conversions in the hugetlb code.
- Yin Fengwei has improved mlock()'s handling of large folios in the
series "support large folio for mlock"
- In the series "Expose swapcache stat for memcg v1" Liu Shixin has
added statistics for memcg v1 users which are available (and useful)
under memcg v2.
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named "MDWE
without inheritance".
- Kefeng Wang has provided the series "mm: convert numa balancing
functions to use a folio" which does what it says.
- In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
makes is possible for a process to propagate KSM treatment across
exec().
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use "high
bandwidth memory" in addition to Optane Data Center Persistent Memory
Modules (DCPMM). The series is named "memory tiering: calculate
abstract distance based on ACPI HMAT"
- In the series "Smart scanning mode for KSM" Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans.
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
series "mm: memcg: fix tracking of pending stats updates values".
- In the series "Implement IOCTL to get and optionally clear info about
PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
us to atomically read-then-clear page softdirty state. This is mainly
used by CRIU.
- Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
- a bunch of relatively minor maintenance tweaks to this code.
- Matthew Wilcox has increased the use of the VMA lock over file-backed
page faults in the series "Handle more faults under the VMA lock". Some
rationalizations of the fault path became possible as a result.
- In the series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
and folio conversions.
- In the series "various improvements to the GUP interface" Lorenzo
Stoakes has simplified and improved the GUP interface with an eye to
providing groundwork for future improvements.
- Andrey Konovalov has sent along the series "kasan: assorted fixes and
improvements" which does those things.
- Some page allocator maintenance work from Kemeng Shi in the series
"Two minor cleanups to break_down_buddy_pages".
- In thes series "New selftest for mm" Breno Leitao has developed
another MM self test which tickles a race we had between madvise() and
page faults.
- In the series "Add folio_end_read" Matthew Wilcox provides cleanups
and an optimization to the core pagecache code.
- Nhat Pham has added memcg accounting for hugetlb memory in the series
"hugetlb memcg accounting".
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series "Abstract vma_merge() and split_vma()".
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series "Fix page_owner's use of free timestamps".
- Lorenzo Stoakes has fixed the handling of new mappings of sealed files
in the series "permit write-sealed memfd read-only shared mappings".
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series "Batch hugetlb vmemmap modification operations".
- Some buffer_head folio conversions and cleanups from Matthew Wilcox in
the series "Finish the create_empty_buffers() transition".
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the series
"mm: PCP high auto-tuning".
- Roman Gushchin has contributed the patchset "mm: improve performance
of accounted kernel memory allocations" which improves their performance
by ~30% as measured by a micro-benchmark.
- folio conversions from Kefeng Wang in the series "mm: convert page
cpupid functions to folios".
- Some kmemleak fixups in Liu Shixin's series "Some bugfix about
kmemleak".
- Qi Zheng has improved our handling of memoryless nodes by keeping them
off the allocation fallback list. This is done in the series "handle
memoryless nodes more appropriately".
- khugepaged conversions from Vishal Moola in the series "Some
khugepaged folio conversions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
FgeUPAD1oasg6CP+INZvCj34waNxwAc=
=E+Y4
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will
be maintained as an LTS kernel.
The architecture specific system call tables are updated for
the added map_shadow_stack() syscall and to remove references
to the long-gone sys_lookup_dcookie() syscall.
-----BEGIN PGP SIGNATURE-----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=H1vH
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
When user input is committed online, DAMON sysfs interface is ignoring the
user input for the monitoring target regions. Such request is valid and
useful for fixed monitoring target regions-based monitoring ops like
'paddr' or 'fvaddr'.
Update the region boundaries as user specified, too. Note that the
monitoring results of the regions that overlap between the latest
monitoring target regions and the new target regions are preserved.
Treat empty monitoring target regions user request as a request to just
make no change to the monitoring target regions. Otherwise, users should
set the monitoring target regions same to current one for every online
input commit, and it could be challenging for dynamic monitoring target
regions update DAMON ops like 'vaddr'. If the user really need to remove
all monitoring target regions, they can simply remove the target and then
create the target again with empty target regions.
Link: https://lkml.kernel.org/r/20231031170131.46972-1-sj@kernel.org
Fixes: da87878010 ("mm/damon/sysfs: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_sysfs_set_targets(), which updates the targets of the context for
online commitment, do not remove targets that removed from the
corresponding sysfs files. As a result, more than intended targets of the
context can exist and hence consume memory and monitoring CPU resource
more than expected.
Fix it by removing all targets of the context and fill up again using the
user input. This could cause unnecessary memory dealloc and realloc
operations, but this is not a hot code path. Also, note that damon_target
is stateless, and hence no data is lost.
[sj@kernel.org: fix unnecessary monitoring results removal]
Link: https://lkml.kernel.org/r/20231028213353.45397-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231022210735.46409-2-sj@kernel.org
Fixes: da87878010 ("mm/damon/sysfs: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: <stable@vger.kernel.org> [5.19.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
LKP reported smatch warning as below:
===================
smatch warnings:
mm/vmalloc.c:3689 vread_iter() error: we previously assumed 'vm' could be null (see line 3667)
......
06c8994626 @3667 size = vm ? get_vm_area_size(vm) : va_size(va);
......
06c8994626 @3689 else if (!(vm->flags & VM_IOREMAP))
^^^^^^^^^
Unchecked dereference
=====================
This is not a runtime bug because the possible null 'vm' in the
pointed place could only happen when flags == VMAP_BLOCK. However, the
case 'flags == VMAP_BLOCK' should never happen and has been detected
with WARN_ON. Please check vm_map_ram() implementation and the earlier
checking in vread_iter() at below:
~~~~~~~~~~~~~~~~~~~~~~~~~~
/*
* VMAP_BLOCK indicates a sub-type of vm_map_ram area, need
* be set together with VMAP_RAM.
*/
WARN_ON(flags == VMAP_BLOCK);
if (!vm && !flags)
continue;
~~~~~~~~~~~~~~~~~~~~~~~~~~
So add checking on whether 'vm' could be null when dereferencing it in
vread_iter(). This mutes smatch complaint.
Link: https://lkml.kernel.org/r/ZTCURc8ZQE+KrTvS@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/ZS/2k6DIMd0tZRgK@MiWiFi-R3L-srv
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202310171600.WCrsOwFj-lkp@intel.com/
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Philip Li <philip.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During a zswap store attempt, the compression algorithm could fail (for
e.g due to the page containing incompressible random data). This is not
tracked in any of existing zswap counters, making it hard to monitor for
and investigate. We have run into this problem several times in our
internal investigations on zswap store failures.
This patch adds a dedicated debugfs counter for compression algorithm
failures.
Link: https://lkml.kernel.org/r/20231024234509.2680539-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Core & protocols
----------------
- Support usec resolution of TCP timestamps, enabled selectively by
a route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were created
via the kernel cmdline at boot, rather than via configfs at runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF
---
- Add new veth-like netdevice where BPF program defines the logic
of the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should
never be true but are hard for the verifier to infer.
With some extra flexibility around handling of the exit / failure.
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on
the value for the current CPU. This allows to deprecate local
one-off implementations of per-CPU storage like
BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support.
One of the use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code
----------------------
- overflow: add DEFINE_FLEX() for on-stack definition of structs
with flexible array members.
- Process doc update with more guidance for reviewers.
Driver API
----------
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring
and querying state of PLL circuits used for clock syntonization,
in network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc
----
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed
-------
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block selection
for IPv6 multicast forwarding and ordering of blocks in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS
to make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=46nS
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...
- Support non-BSS ELF segments with 0 filesz (Eric W. Biederman, Kees Cook)
- Enable namespaced binfmt_misc (Christian Brauner)
- Remove struct tag 'dynamic' from ELF UAPI (Alejandro Colomar)
- Clean up binfmt_elf_fdpic debug output (Greg Ungerer)
-----BEGIN PGP SIGNATURE-----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=hxk8
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Support non-BSS ELF segments with zero filesz
Eric Biederman and I refactored ELF segment loading to handle the
case where a segment has a smaller filesz than memsz. Traditionally
linkers only did this for .bss and it was always the last segment. As
a result, the kernel only handled this case when it was the last
segment. We've had two recent cases where linkers were trying to use
these kinds of segments for other reasons, and the were in the middle
of the segment list. There was no good reason for the kernel not to
support this, and the refactor actually ends up making things more
readable too.
- Enable namespaced binfmt_misc
Christian Brauner has made it possible to use binfmt_misc with mount
namespaces. This means some traditionally root-only interfaces (for
adding/removing formats) are now more exposed (but believed to be
safe).
- Remove struct tag 'dynamic' from ELF UAPI
Alejandro Colomar noticed that the ELF UAPI has been polluting the
struct namespace with an unused and overly generic tag named
"dynamic" for no discernible reason for many many years. After
double-checking various distro source repositories, it has been
removed.
- Clean up binfmt_elf_fdpic debug output (Greg Ungerer)
* tag 'execve-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_misc: enable sandboxed mounts
binfmt_misc: cleanup on filesystem umount
binfmt_elf_fdpic: clean up debug warnings
mm: Remove unused vm_brk()
binfmt_elf: Only report padzero() errors when PROT_WRITE
binfmt_elf: Use elf_load() for library
binfmt_elf: Use elf_load() for interpreter
binfmt_elf: elf_bss no longer used by load_elf_binary()
binfmt_elf: Support segments with 0 filesz and misaligned starts
elf, uapi: Remove struct tag 'dynamic'
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmU7xhwACgkQu+CwddJF
iJr60gf8ChEzZnP6JM6OtvcbL1AtuoIn/B0iOOCbZYM2e/EPVL19KI3IXxOVb9j3
bOIogGT/PSa6cfzPwEzxu1AEv3A2xu9TgXMIG3vXzBU7QqPlp2rFD8+xvLe8Trcl
VWaPZNUCKL9Hrq5gPM8B12N/UuAUA5Pjf9A9Hn1ZNjS4p2seEIc+CfdqtEAB7Th3
++Tc9MRNP5bEmswf8iivIsuDDSkRS3GxshfBbcVzSE2l+JvxekKjmPjykQvsGnJm
sV3Z1blej9Dq/d04ZRaKtLSrA7kW27cyHWzTsZb2IXs+JOmmGZGgK0CFl9OOVtVD
IxpsYLw6oZKf8WXetkyzplsQWERXUw==
=TGgo
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLUB: slab order calculation refactoring (Vlastimil Babka, Feng Tang)
Recent proposals to tune the slab order calculations have prompted us
to look at the current code and refactor it to make it easier to
follow and eliminate some odd corner cases.
The refactoring is mostly non-functional changes, but should make the
actual tuning easier to implement and review.
* tag 'slab-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slub: refactor calculate_order() and calc_slab_order()
mm/slub: attempt to find layouts up to 1/2 waste in calculate_order()
mm/slub: remove min_objects loop from calculate_order()
mm/slub: simplify the last resort slab order calculation
mm/slub: add sanity check for slub_min/max_order cmdline setup
This pull request contains the following branches:
rcu/torture: RCU torture, locktorture and generic torture infrastructure
updates that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
rcu/fixes: Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments.
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM.
* Object information is now dumped in case of invalid callback
invocation.
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed.
rcu/docs: RCU documentation updates
rcu/refscale: RCU reference scalability test minor fixes and doc
improvements.
rcu/tasks: RCU tasks minor fixes
rcu/stall: Stall detection updates. Introduce RCU CPU Stall notifiers
that allows a subsystem to provide informations to help debugging.
Also cure some false positive stalls.
-----BEGIN PGP SIGNATURE-----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=cVD7
-----END PGP SIGNATURE-----
Merge tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull RCU updates from Frederic Weisbecker:
- RCU torture, locktorture and generic torture infrastructure updates
that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
- Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM
* Object information is now dumped in case of invalid callback
invocation
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed
- RCU documentation updates
- RCU reference scalability test minor fixes and doc improvements.
- RCU tasks minor fixes
- Stall detection updates. Introduce RCU CPU Stall notifiers that
allows a subsystem to provide informations to help debugging. Also
cure some false positive stalls.
* tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (56 commits)
srcu: Only accelerate on enqueue time
locktorture: Check the correct variable for allocation failure
srcu: Fix callbacks acceleration mishandling
rcu: Comment why callbacks migration can't wait for CPUHP_RCUTREE_PREP
rcu: Standardize explicit CPU-hotplug calls
rcu: Conditionally build CPU-hotplug teardown callbacks
rcu: Remove references to rcu_migrate_callbacks() from diagrams
rcu: Assume rcu_report_dead() is always called locally
rcu: Assume IRQS disabled from rcu_report_dead()
rcu: Use rcu_segcblist_segempty() instead of open coding it
rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
srcu: Fix srcu_struct node grpmask overflow on 64-bit systems
torture: Convert parse-console.sh to mktemp
rcutorture: Traverse possible cpu to set maxcpu in rcu_nocb_toggle()
rcutorture: Replace schedule_timeout*() 1-jiffy waits with HZ/20
torture: Add kvm.sh --debug-info argument
locktorture: Rename readers_bind/writers_bind to bind_readers/bind_writers
doc: Catch-up update for locktorture module parameters
locktorture: Add call_rcu_chains module parameter
locktorture: Add new module parameters to lock_torture_print_module_parms()
...
- Fair scheduler (SCHED_OTHER) improvements:
- Remove the old and now unused SIS_PROP code & option
- Scan cluster before LLC in the wake-up path
- Use candidate prev/recent_used CPU if scanning failed for cluster wakeup
- NUMA scheduling improvements:
- Improve the VMA access-PID code to better skip/scan VMAs
- Extend tracing to cover VMA-skipping decisions
- Improve/fix the recently introduced sched_numa_find_nth_cpu() code
- Generalize numa_map_to_online_node()
- Energy scheduling improvements:
- Remove the EM_MAX_COMPLEXITY limit
- Add tracepoints to track energy computation
- Make the behavior of the 'sched_energy_aware' sysctl more consistent
- Consolidate and clean up access to a CPU's max compute capacity
- Fix uclamp code corner cases
- RT scheduling improvements:
- Drive dl_rq->overloaded with dl_rq->pushable_dl_tasks updates
- Drive the ->rto_mask with rt_rq->pushable_tasks updates
- Scheduler scalability improvements:
- Rate-limit updates to tg->load_avg
- On x86 disable IBRS when CPU is offline to improve single-threaded performance
- Micro-optimize in_task() and in_interrupt()
- Micro-optimize the PSI code
- Avoid updating PSI triggers and ->rtpoll_total when there are no state changes
- Core scheduler infrastructure improvements:
- Use saved_state to reduce some spurious freezer wakeups
- Bring in a handful of fast-headers improvements to scheduler headers
- Make the scheduler UAPI headers more widely usable by user-space
- Simplify the control flow of scheduler syscalls by using lock guards
- Fix sched_setaffinity() vs. CPU hotplug race
- Scheduler debuggability improvements:
- Disallow writing invalid values to sched_rt_period_us
- Fix a race in the rq-clock debugging code triggering warnings
- Fix a warning in the bandwidth distribution code
- Micro-optimize in_atomic_preempt_off() checks
- Enforce that the tasklist_lock is held in for_each_thread()
- Print the TGID in sched_show_task()
- Remove the /proc/sys/kernel/sched_child_runs_first sysctl
- Misc cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GDqb
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduler (SCHED_OTHER) improvements:
- Remove the old and now unused SIS_PROP code & option
- Scan cluster before LLC in the wake-up path
- Use candidate prev/recent_used CPU if scanning failed for cluster
wakeup
NUMA scheduling improvements:
- Improve the VMA access-PID code to better skip/scan VMAs
- Extend tracing to cover VMA-skipping decisions
- Improve/fix the recently introduced sched_numa_find_nth_cpu() code
- Generalize numa_map_to_online_node()
Energy scheduling improvements:
- Remove the EM_MAX_COMPLEXITY limit
- Add tracepoints to track energy computation
- Make the behavior of the 'sched_energy_aware' sysctl more
consistent
- Consolidate and clean up access to a CPU's max compute capacity
- Fix uclamp code corner cases
RT scheduling improvements:
- Drive dl_rq->overloaded with dl_rq->pushable_dl_tasks updates
- Drive the ->rto_mask with rt_rq->pushable_tasks updates
Scheduler scalability improvements:
- Rate-limit updates to tg->load_avg
- On x86 disable IBRS when CPU is offline to improve single-threaded
performance
- Micro-optimize in_task() and in_interrupt()
- Micro-optimize the PSI code
- Avoid updating PSI triggers and ->rtpoll_total when there are no
state changes
Core scheduler infrastructure improvements:
- Use saved_state to reduce some spurious freezer wakeups
- Bring in a handful of fast-headers improvements to scheduler
headers
- Make the scheduler UAPI headers more widely usable by user-space
- Simplify the control flow of scheduler syscalls by using lock
guards
- Fix sched_setaffinity() vs. CPU hotplug race
Scheduler debuggability improvements:
- Disallow writing invalid values to sched_rt_period_us
- Fix a race in the rq-clock debugging code triggering warnings
- Fix a warning in the bandwidth distribution code
- Micro-optimize in_atomic_preempt_off() checks
- Enforce that the tasklist_lock is held in for_each_thread()
- Print the TGID in sched_show_task()
- Remove the /proc/sys/kernel/sched_child_runs_first sysctl
... and misc cleanups & fixes"
* tag 'sched-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits)
sched/fair: Remove SIS_PROP
sched/fair: Use candidate prev/recent_used CPU if scanning failed for cluster wakeup
sched/fair: Scan cluster before scanning LLC in wake-up path
sched: Add cpus_share_resources API
sched/core: Fix RQCF_ACT_SKIP leak
sched/fair: Remove unused 'curr' argument from pick_next_entity()
sched/nohz: Update comments about NEWILB_KICK
sched/fair: Remove duplicate #include
sched/psi: Update poll => rtpoll in relevant comments
sched: Make PELT acronym definition searchable
sched: Fix stop_one_cpu_nowait() vs hotplug
sched/psi: Bail out early from irq time accounting
sched/topology: Rename 'DIE' domain to 'PKG'
sched/psi: Delete the 'update_total' function parameter from update_triggers()
sched/psi: Avoid updating PSI triggers and ->rtpoll_total when there are no state changes
sched/headers: Remove comment referring to rq::cpu_load, since this has been removed
sched/numa: Complete scanning of inactive VMAs when there is no alternative
sched/numa: Complete scanning of partial VMAs regardless of PID activity
sched/numa: Move up the access pid reset logic
sched/numa: Trace decisions related to skipping VMAs
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppYgAKCRCRxhvAZXjc
okIHAP9anLz1QDyMLH12ASuHjgBc0Of3jcB6NB97IWGpL4O21gEA46ohaD+vcJuC
YkBLU3lXqQ87nfu28ExFAzh10hG2jwM=
=m4pB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppWAAKCRCRxhvAZXjc
okB2AP4jjoRErJBwj245OIDJqzoj4m4UVOVd0MH2AkiSpANczwD/TToChdpusY2y
qAYg1fQoGMbDVlb7Txaj9qI9ieCf9w0=
=2PXg
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs xattr updates from Christian Brauner:
"The 's_xattr' field of 'struct super_block' currently requires a
mutable table of 'struct xattr_handler' entries (although each handler
itself is const). However, no code in vfs actually modifies the
tables.
This changes the type of 's_xattr' to allow const tables, and modifies
existing file systems to move their tables to .rodata. This is
desirable because these tables contain entries with function pointers
in them; moving them to .rodata makes it considerably less likely to
be modified accidentally or maliciously at runtime"
* tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
const_structs.checkpatch: add xattr_handler
net: move sockfs_xattr_handlers to .rodata
shmem: move shmem_xattr_handlers to .rodata
overlayfs: move xattr tables to .rodata
xfs: move xfs_xattr_handlers to .rodata
ubifs: move ubifs_xattr_handlers to .rodata
squashfs: move squashfs_xattr_handlers to .rodata
smb: move cifs_xattr_handlers to .rodata
reiserfs: move reiserfs_xattr_handlers to .rodata
orangefs: move orangefs_xattr_handlers to .rodata
ocfs2: move ocfs2_xattr_handlers and ocfs2_xattr_handler_map to .rodata
ntfs3: move ntfs_xattr_handlers to .rodata
nfs: move nfs4_xattr_handlers to .rodata
kernfs: move kernfs_xattr_handlers to .rodata
jfs: move jfs_xattr_handlers to .rodata
jffs2: move jffs2_xattr_handlers to .rodata
hfsplus: move hfsplus_xattr_handlers to .rodata
hfs: move hfs_xattr_handlers to .rodata
gfs2: move gfs2_xattr_handlers_max to .rodata
fuse: move fuse_xattr_handlers to .rodata
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTpoQAAKCRCRxhvAZXjc
ovFNAQDgIRjXfZ1Ku+USxsRRdqp8geJVaNc3PuMmYhOYhUenqgEAmC1m+p0y31dS
P6+HlL16Mqgu0tpLCcJK9BibpDZ0Ew4=
=7yD1
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Rename and export helpers that get write access to a mount. They
are used in overlayfs to get write access to the upper mount.
- Print the pretty name of the root device on boot failure. This
helps in scenarios where we would usually only print
"unknown-block(1,2)".
- Add an internal SB_I_NOUMASK flag. This is another part in the
endless POSIX ACL saga in a way.
When POSIX ACLs are enabled via SB_POSIXACL the vfs cannot strip
the umask because if the relevant inode has POSIX ACLs set it might
take the umask from there. But if the inode doesn't have any POSIX
ACLs set then we apply the umask in the filesytem itself. So we end
up with:
(1) no SB_POSIXACL -> strip umask in vfs
(2) SB_POSIXACL -> strip umask in filesystem
The umask semantics associated with SB_POSIXACL allowed filesystems
that don't even support POSIX ACLs at all to raise SB_POSIXACL
purely to avoid umask stripping. That specifically means NFS v4 and
Overlayfs. NFS v4 does it because it delegates this to the server
and Overlayfs because it needs to delegate umask stripping to the
upper filesystem, i.e., the filesystem used as the writable layer.
This went so far that SB_POSIXACL is raised eve on kernels that
don't even have POSIX ACL support at all.
Stop this blatant abuse and add SB_I_NOUMASK which is an internal
superblock flag that filesystems can raise to opt out of umask
handling. That should really only be the two mentioned above. It's
not that we want any filesystems to do this. Ideally we have all
umask handling always in the vfs.
- Make overlayfs use SB_I_NOUMASK too.
- Now that we have SB_I_NOUMASK, stop checking for SB_POSIXACL in
IS_POSIXACL() if the kernel doesn't have support for it. This is a
very old patch but it's only possible to do this now with the wider
cleanup that was done.
- Follow-up work on fake path handling from last cycle. Citing mostly
from Amir:
When overlayfs was first merged, overlayfs files of regular files
and directories, the ones that are installed in file table, had a
"fake" path, namely, f_path is the overlayfs path and f_inode is
the "real" inode on the underlying filesystem.
In v6.5, we took another small step by introducing of the
backing_file container and the file_real_path() helper. This change
allowed vfs and filesystem code to get the "real" path of an
overlayfs backing file. With this change, we were able to make
fsnotify work correctly and report events on the "real" filesystem
objects that were accessed via overlayfs.
This method works fine, but it still leaves the vfs vulnerable to
new code that is not aware of files with fake path. A recent
example is commit db1d1e8b98 ("IMA: use vfs_getattr_nosec to get
the i_version"). This commit uses direct referencing to f_path in
IMA code that otherwise uses file_inode() and file_dentry() to
reference the filesystem objects that it is measuring.
This contains work to switch things around: instead of having
filesystem code opt-in to get the "real" path, have generic code
opt-in for the "fake" path in the few places that it is needed.
Is it far more likely that new filesystems code that does not use
the file_dentry() and file_real_path() helpers will end up causing
crashes or averting LSM/audit rules if we keep the "fake" path
exposed by default.
This change already makes file_dentry() moot, but for now we did
not change this helper just added a WARN_ON() in ovl_d_real() to
catch if we have made any wrong assumptions.
After the dust settles on this change, we can make file_dentry() a
plain accessor and we can drop the inode argument to ->d_real().
- Switch struct file to SLAB_TYPESAFE_BY_RCU. This looks like a small
change but it really isn't and I would like to see everyone on
their tippie toes for any possible bugs from this work.
Essentially we've been doing most of what SLAB_TYPESAFE_BY_RCU for
files since a very long time because of the nasty interactions
between the SCM_RIGHTS file descriptor garbage collection. So
extending it makes a lot of sense but it is a subtle change. There
are almost no places that fiddle with file rcu semantics directly
and the ones that did mess around with struct file internal under
rcu have been made to stop doing that because it really was always
dodgy.
I forgot to put in the link tag for this change and the discussion
in the commit so adding it into the merge message:
https://lore.kernel.org/r/20230926162228.68666-1-mjguzik@gmail.com
Cleanups:
- Various smaller pipe cleanups including the removal of a spin lock
that was only used to protect against writes without pipe_lock()
from O_NOTIFICATION_PIPE aka watch queues. As that was never
implemented remove the additional locking from pipe_write().
- Annotate struct watch_filter with the new __counted_by attribute.
- Clarify do_unlinkat() cleanup so that it doesn't look like an extra
iput() is done that would cause issues.
- Simplify file cleanup when the file has never been opened.
- Use module helper instead of open-coding it.
- Predict error unlikely for stale retry.
- Use WRITE_ONCE() for mount expiry field instead of just commenting
that one hopes the compiler doesn't get smart.
Fixes:
- Fix readahead on block devices.
- Fix writeback when layztime is enabled and inodes whose timestamp
is the only thing that changed reside on wb->b_dirty_time. This
caused excessively large zombie memory cgroup when lazytime was
enabled as such inodes weren't handled fast enough.
- Convert BUG_ON() to WARN_ON_ONCE() in open_last_lookups()"
* tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
file, i915: fix file reference for mmap_singleton()
vfs: Convert BUG_ON to WARN_ON_ONCE in open_last_lookups
writeback, cgroup: switch inodes with dirty timestamps to release dying cgwbs
chardev: Simplify usage of try_module_get()
ovl: rely on SB_I_NOUMASK
fs: fix umask on NFS with CONFIG_FS_POSIX_ACL=n
fs: store real path instead of fake path in backing file f_path
fs: create helper file_user_path() for user displayed mapped file path
fs: get mnt_writers count for an open backing file's real path
vfs: stop counting on gcc not messing with mnt_expiry_mark if not asked
vfs: predict the error in retry_estale as unlikely
backing file: free directly
vfs: fix readahead(2) on block devices
io_uring: use files_lookup_fd_locked()
file: convert to SLAB_TYPESAFE_BY_RCU
vfs: shave work on failed file open
fs: simplify misleading code to remove ambiguity regarding ihold()/iput()
watch_queue: Annotate struct watch_filter with __counted_by
fs/pipe: use spinlock in pipe_read() only if there is a watch_queue
fs/pipe: remove unnecessary spinlock from pipe_write()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZT0C2gAKCRCRxhvAZXjc
otV8AQCK5F9ONoQ7ISpdrKyUJiswySGXx0CYPfXbSg5gHH87zgEAua3vwVKeGXXF
5iVsdiNzIIQDwGDx7FyxufL4ggcN6gQ=
=E1kV
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs superblock updates from Christian Brauner:
"This contains the work to make block device opening functions return a
struct bdev_handle instead of just a struct block_device. The same
struct bdev_handle is then also passed to block device closing
functions.
This allows us to propagate context from opening to closing a block
device without having to modify all users everytime.
Sidenote, in the future we might even want to try and have block
device opening functions return a struct file directly but that's a
series on top of this.
These are further preparatory changes to be able to count writable
opens and blocking writes to mounted block devices. That's a separate
piece of work for next cycle and for that we absolutely need the
changes to btrfs that have been quietly dropped somehow.
Originally the series contained a patch that removed the old
blkdev_*() helpers. But since this would've caused needles churn in
-next for bcachefs we ended up delaying it.
The second piece of work addresses one of the major annoyances about
the work last cycle, namely that we required dropping s_umount
whenever we used the superblock and fs_holder_ops for a block device.
The reason for that requirement had been that in some codepaths
s_umount could've been taken under disk->open_mutex (that's always
been the case, at least theoretically). For example, on surprise block
device removal or media change. And opening and closing block devices
required grabbing disk->open_mutex as well.
So we did the work and went through the block layer and fixed all
those places so that s_umount is never taken under disk->open_mutex.
This means no more brittle games where we yield and reacquire s_umount
during block device opening and closing and no more requirements where
block devices need to be closed. Filesystems don't need to care about
this.
There's a bunch of other follow-up work such as moving block device
freezing and thawing to holder operations which makes it work for all
block devices and not just the main block device just as we did for
surprise removal. But that is for next cycle.
Tested with fstests for all major fses, blktests, LTP"
* tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (37 commits)
porting: update locking requirements
fs: assert that open_mutex isn't held over holder ops
block: assert that we're not holding open_mutex over blk_report_disk_dead
block: move bdev_mark_dead out of disk_check_media_change
block: WARN_ON_ONCE() when we remove active partitions
block: simplify bdev_del_partition()
fs: Avoid grabbing sb->s_umount under bdev->bd_holder_lock
jfs: fix log->bdev_handle null ptr deref in lbmStartIO
bcache: Fixup error handling in register_cache()
xfs: Convert to bdev_open_by_path()
reiserfs: Convert to bdev_open_by_dev/path()
ocfs2: Convert to use bdev_open_by_dev()
nfs/blocklayout: Convert to use bdev_open_by_dev/path()
jfs: Convert to bdev_open_by_dev()
f2fs: Convert to bdev_open_by_dev/path()
ext4: Convert to bdev_open_by_dev()
erofs: Convert to use bdev_open_by_path()
btrfs: Convert to bdev_open_by_path()
fs: Convert to bdev_open_by_dev()
mm/swap: Convert to use bdev_open_by_dev()
...
Convert swapping code to use bdev_open_by_dev() and pass the handle
around.
CC: linux-mm@kvack.org
CC: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-18-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZTp12QAKCRDbK58LschI
g8BrAQDifqp5liEEdXV8jdReBwJtqInjrL5tzy5LcyHUMQbTaAEA6Ph3Ct3B+3oA
mFnIW/y6UJiJrby0Xz4+vV5BXI/5WQg=
=pLCV
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-26
We've added 51 non-merge commits during the last 10 day(s) which contain
a total of 75 files changed, 5037 insertions(+), 200 deletions(-).
The main changes are:
1) Add open-coded task, css_task and css iterator support.
One of the use cases is customizable OOM victim selection via BPF,
from Chuyi Zhou.
2) Fix BPF verifier's iterator convergence logic to use exact states
comparison for convergence checks, from Eduard Zingerman,
Andrii Nakryiko and Alexei Starovoitov.
3) Add BPF programmable net device where bpf_mprog defines the logic
of its xmit routine. It can operate in L3 and L2 mode,
from Daniel Borkmann and Nikolay Aleksandrov.
4) Batch of fixes for BPF per-CPU kptr and re-enable unit_size checking
for global per-CPU allocator, from Hou Tao.
5) Fix libbpf which eagerly assumed that SHT_GNU_verdef ELF section
was going to be present whenever a binary has SHT_GNU_versym section,
from Andrii Nakryiko.
6) Fix BPF ringbuf correctness to fold smp_mb__before_atomic() into
atomic_set_release(), from Paul E. McKenney.
7) Add a warning if NAPI callback missed xdp_do_flush() under
CONFIG_DEBUG_NET which helps checking if drivers were missing
the former, from Sebastian Andrzej Siewior.
8) Fix missed RCU read-lock in bpf_task_under_cgroup() which was throwing
a warning under sleepable programs, from Yafang Shao.
9) Avoid unnecessary -EBUSY from htab_lock_bucket by disabling IRQ before
checking map_locked, from Song Liu.
10) Make BPF CI linked_list failure test more robust,
from Kumar Kartikeya Dwivedi.
11) Enable samples/bpf to be built as PIE in Fedora, from Viktor Malik.
12) Fix xsk starving when multiple xsk sockets were associated with
a single xsk_buff_pool, from Albert Huang.
13) Clarify the signed modulo implementation for the BPF ISA standardization
document that it uses truncated division, from Dave Thaler.
14) Improve BPF verifier's JEQ/JNE branch taken logic to also consider
signed bounds knowledge, from Andrii Nakryiko.
15) Add an option to XDP selftests to use multi-buffer AF_XDP
xdp_hw_metadata and mark used XDP programs as capable to use frags,
from Larysa Zaremba.
16) Fix bpftool's BTF dumper wrt printing a pointer value and another
one to fix struct_ops dump in an array, from Manu Bretelle.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (51 commits)
netkit: Remove explicit active/peer ptr initialization
selftests/bpf: Fix selftests broken by mitigations=off
samples/bpf: Allow building with custom bpftool
samples/bpf: Fix passing LDFLAGS to libbpf
samples/bpf: Allow building with custom CFLAGS/LDFLAGS
bpf: Add more WARN_ON_ONCE checks for mismatched alloc and free
selftests/bpf: Add selftests for netkit
selftests/bpf: Add netlink helper library
bpftool: Extend net dump with netkit progs
bpftool: Implement link show support for netkit
libbpf: Add link-based API for netkit
tools: Sync if_link uapi header
netkit, bpf: Add bpf programmable net device
bpf: Improve JEQ/JNE branch taken logic
bpf: Fold smp_mb__before_atomic() into atomic_set_release()
bpf: Fix unnecessary -EBUSY from htab_lock_bucket
xsk: Avoid starving the xsk further down the list
bpf: print full verifier states on infinite loop detection
selftests/bpf: test if state loops are detected in a tricky case
bpf: correct loop detection for iterators convergence
...
====================
Link: https://lore.kernel.org/r/20231026150509.2824-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve alloc_migration_target_by_mpol()'s treatment of MPOL_INTERLEAVE.
Make an effort in do_mbind(), to identify the correct interleave index for
the first page to be migrated, so that it and all subsequent pages from
the same vma will be targeted to precisely their intended nodes. Pages
from following vmas will still be interleaved from the requested nodemask,
but perhaps starting from a different base.
Whether this is worth doing at all, or worth improving further, is
arguable: queue_folio_required() is right not to care about the precise
placement on interleaved nodes; but this little effort seems appropriate.
[hughd@google.com: do vma_iter search under mmap_write_unlock()]
Link: https://lkml.kernel.org/r/3311d544-fb05-a7f1-1b74-16aa0f6cd4fe@google.com
Link: https://lkml.kernel.org/r/77954a5-9c9b-1c11-7d5c-3262c01b895f@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun heo <tj@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mbind(2) holds down_write of current task's mmap_lock throughout
(exclusive because it needs to set the new mempolicy on the vmas);
migrate_pages(2) holds down_read of pid's mmap_lock throughout.
They both hold mmap_lock across the internal migrate_pages(), under which
all new page allocations (huge or small) are made. I'm nervous about it;
and migrate_pages() certainly does not need mmap_lock itself. It's done
this way for mbind(2), because its page allocator is vma_alloc_folio() or
alloc_hugetlb_folio_vma(), both of which depend on vma and address.
Now that we have alloc_pages_mpol(), depending on (refcounted) memory
policy and interleave index, mbind(2) can be modified to use that or
alloc_hugetlb_folio_nodemask(), and then not need mmap_lock across the
internal migrate_pages() at all: add alloc_migration_target_by_mpol() to
replace mbind's new_page().
(After that change, alloc_hugetlb_folio_vma() is used by nothing but a
userfaultfd function: move it out of hugetlb.h and into the #ifdef.)
migrate_pages(2) has chosen its target node before migrating, so can
continue to use the standard alloc_migration_target(); but let it take and
drop mmap_lock just around migrate_to_node()'s queue_pages_range():
neither the node-to-node calculations nor the page migrations need it.
It seems unlikely, but it is conceivable that some userspace depends on
the kernel's mmap_lock exclusion here, instead of doing its own locking:
more likely in a testsuite than in real life. It is also possible, of
course, that some pages on the list will be munmapped by another thread
before they are migrated, or a newer memory policy applied to the range by
that time: but such races could happen before, as soon as mmap_lock was
dropped, so it does not appear to be a concern.
Link: https://lkml.kernel.org/r/21e564e8-269f-6a89-7ee2-fd612831c289@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun heo <tj@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shrink shmem's stack usage by eliminating the pseudo-vma from its folio
allocation. alloc_pages_mpol(gfp, order, pol, ilx, nid) becomes the
principal actor for passing mempolicy choice down to __alloc_pages(),
rather than vma_alloc_folio(gfp, order, vma, addr, hugepage).
vma_alloc_folio() and alloc_pages() remain, but as wrappers around
alloc_pages_mpol(). alloc_pages_bulk_*() untouched, except to provide the
additional args to policy_nodemask(), which subsumes policy_node().
Cleanup throughout, cutting out some unhelpful "helpers".
It would all be much simpler without MPOL_INTERLEAVE, but that adds a
dynamic to the constant mpol: complicated by v3.6 commit 09c231cb8b
("tmpfs: distribute interleave better across nodes"), which added ino bias
to the interleave, hidden from mm/mempolicy.c until this commit.
Hence "ilx" throughout, the "interleave index". Originally I thought it
could be done just with nid, but that's wrong: the nodemask may come from
the shared policy layer below a shmem vma, or it may come from the task
layer above a shmem vma; and without the final nodemask then nodeid cannot
be decided. And how ilx is applied depends also on page order.
The interleave index is almost always irrelevant unless MPOL_INTERLEAVE:
with one exception in alloc_pages_mpol(), where the NO_INTERLEAVE_INDEX
passed down from vma-less alloc_pages() is also used as hint not to use
THP-style hugepage allocation - to avoid the overhead of a hugepage arg
(though I don't understand why we never just added a GFP bit for THP - if
it actually needs a different allocation strategy from other pages of the
same order). vma_alloc_folio() still carries its hugepage arg here, but
it is not used, and should be removed when agreed.
get_vma_policy() no longer allows a NULL vma: over time I believe we've
eradicated all the places which used to need it e.g. swapoff and madvise
used to pass NULL vma to read_swap_cache_async(), but now know the vma.
[hughd@google.com: handle NULL mpol being passed to __read_swap_cache_async()]
Link: https://lkml.kernel.org/r/ea419956-4751-0102-21f7-9c93cb957892@google.com
Link: https://lkml.kernel.org/r/74e34633-6060-f5e3-aee-7040d43f2e93@google.com
Link: https://lkml.kernel.org/r/1738368e-bac0-fd11-ed7f-b87142a939fe@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun heo <tj@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Domenico Cerasuolo <mimmocerasuolo@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
folio_prep_large_rmappable() is being used repeatedly along with a
conversion from page to folio, a check non-NULL, a check order > 1: wrap
it all up into struct folio *page_rmappable_folio(struct page *).
Link: https://lkml.kernel.org/r/8d92c6cf-eebe-748-e29c-c8ab224c741@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun heo <tj@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
v3.8 commit b24f53a0be ("mm: mempolicy: Add MPOL_MF_LAZY") introduced
MPOL_MF_LAZY, and included it in the MPOL_MF_VALID flags; but a720094ded
("mm: mempolicy: Hide MPOL_NOOP and MPOL_MF_LAZY from userspace for now")
immediately removed it from MPOL_MF_VALID flags, pending further review.
"This will need to be revisited", but it has not been reinstated.
The present state is confusing: there is dead code in mm/mempolicy.c to
handle MPOL_MF_LAZY cases which can never occur. Remove that: it can be
resurrected later if necessary. But keep the definition of MPOL_MF_LAZY,
which must remain in the UAPI, even though it always fails with EINVAL.
https://lore.kernel.org/linux-mm/1553041659-46787-1-git-send-email-yang.shi@linux.alibaba.com/
links to a previous request to remove MPOL_MF_LAZY.
Link: https://lkml.kernel.org/r/80c9665c-1c3f-17ba-21a3-f6115cebf7d@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun heo <tj@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mpol_shared_policy_init() does not need to use a pseudo-vma: it can use
sp_alloc() and sp_insert() directly, since the object's shared policy tree
is empty and inaccessible (needing no lock) at get_inode() time.
Link: https://lkml.kernel.org/r/3bef62d8-ae78-4c2-533-56a44ae425c@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun heo <tj@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Before getting down to work, do a little cleanup, mainly of inconsistent
variable naming. I gave up trying to rationalize mpol versus pol versus
policy, and node versus nid, but let's avoid p and nd. Remove a few
superfluous blank lines, but add one; and here prefer vma->vm_policy to
vma_policy(vma) - the latter being appropriate in other sources, which
have to allow for !CONFIG_NUMA. That intriguing line about KERNEL_DS?
should have gone in v2.6.15, when numa_policy_init() stopped using
set_mempolicy(2)'s system call handler.
Link: https://lkml.kernel.org/r/68287974-b6ae-7df-4ba-d19ddd69cbf@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun heo <tj@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Delete those ancient pr_debug()s - PDprintk()s in Andi Kleen's original
submission of core NUMA API, and useful when debugging shared mempolicy
lifetime back then, but not used recently.
Link: https://lkml.kernel.org/r/f25135-ffb2-40d8-9577-720772b333@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun heo <tj@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
"man 2 migrate_pages" says "On success migrate_pages() returns the number
of pages that could not be moved". Although 5.3 and 5.4 commits fixed
mbind(MPOL_MF_STRICT|MPOL_MF_MOVE*) to fail with EIO when not all pages
could be moved (because some could not be isolated for migration),
migrate_pages(2) was left still reporting only those pages failing at the
migration stage, forgetting those failing at the earlier isolation stage.
Fix that by accumulating a long nr_failed count in struct queue_pages,
returned by queue_pages_range() when it's not returning an error, for
adding on to the nr_failed count from migrate_pages() in mm/migrate.c. A
count of pages? It's more a count of folios, but changing it to pages
would entail more work (also in mm/migrate.c): does not seem justified.
queue_pages_range() itself should only return -EIO in the "strictly
unmovable" case (STRICT without any MOVEs): in that case it's best to
break out as soon as nr_failed gets set; but otherwise it should continue
to isolate pages for MOVing even when nr_failed - as the mbind(2) manpage
promises.
There's a case when nr_failed should be incremented when it was missed:
queue_folios_pte_range() and queue_folios_hugetlb() count the transient
migration entries, like queue_folios_pmd() already did. And there's a
case when nr_failed should not be incremented when it would have been: in
meeting later PTEs of the same large folio, which can only be isolated
once: fixed by recording the current large folio in struct queue_pages.
Clean up the affected functions, fixing or updating many comments. Bool
migrate_folio_add(), without -EIO: true if adding, or if skipping shared
(but its arguable folio_estimated_sharers() heuristic left unchanged).
Use MPOL_MF_WRLOCK flag to queue_pages_range(), instead of bool lock_vma.
Use explicit STRICT|MOVE* flags where queue_pages_test_walk() checks for
skipping, instead of hiding them behind MPOL_MF_VALID.
Link: https://lkml.kernel.org/r/9a6b0b9-3bb-dbef-8adf-efab4397b8d@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun heo <tj@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_sysfs_set_targets() had a bug that can result in unexpected memory
usage and monitoring overhead increase. The bug has fixed by a previous
commit. Add a unit test for avoiding a similar bug of future.
Link: https://lkml.kernel.org/r/20231022210735.46409-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calculating the pseudo-moving access rate, DAMON divides some values
by the maximum nr_accesses. However, due to the type of the related
variables, simple division-based calculation of the divisor can return
zero. As a result, divide-by-zero is possible. Fix it by using
damon_max_nr_accesses(), which handles the case.
Note that this is a fix for a commit that not in the mainline but mm
tree.
Link: https://lkml.kernel.org/r/20231019194924.100347-6-sj@kernel.org
Fixes: ace30fb21a ("mm/damon/core: use pseudo-moving sum for nr_accesses_bp")
Reported-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calculating the hotness threshold for lru_prio scheme of
DAMON_LRU_SORT, the module divides some values by the maximum nr_accesses.
However, due to the type of the related variables, simple division-based
calculation of the divisor can return zero. As a result, divide-by-zero
is possible. Fix it by using damon_max_nr_accesses(), which handles the
case.
Link: https://lkml.kernel.org/r/20231019194924.100347-5-sj@kernel.org
Fixes: 40e983cca9 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calculating the hotness of each region for the under-quota regions
prioritization, DAMON divides some values by the maximum nr_accesses.
However, due to the type of the related variables, simple division-based
calculation of the divisor can return zero. As a result, divide-by-zero
is possible. Fix it by using damon_max_nr_accesses(), which handles the
case.
Link: https://lkml.kernel.org/r/20231019194924.100347-4-sj@kernel.org
Fixes: 198f0f4c58 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [5.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When monitoring attributes are changed, DAMON updates access rate of the
monitoring results accordingly. For that, it divides some values by the
maximum nr_accesses. However, due to the type of the related variables,
simple division-based calculation of the divisor can return zero. As a
result, divide-by-zero is possible. Fix it by using
damon_max_nr_accesses(), which handles the case.
Link: https://lkml.kernel.org/r/20231019194924.100347-3-sj@kernel.org
Fixes: 2f5bef5a59 ("mm/damon/core: update monitoring results for new monitoring attributes")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [6.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit dc68badced ("mm: mlock: update mlock_pte_range to handle
large folio") I've just occasionally seen VM_WARN_ON_FOLIO(folio_test_ksm)
warnings from folio_within_range(), in a splurge after testing with KSM
hyperactive.
folio_referenced_one()'s use of folio_within_vma() is safe because it
checks folio_test_large() first; but allow_mlock_munlock() needs to do the
same to avoid those warnings (or check !folio_test_ksm() itself? Or move
either check into folio_within_range()? Hard to tell without more
examples of its use).
Link: https://lkml.kernel.org/r/23852f6a-5bfa-1ffd-30db-30c5560ad426@google.com
Fixes: dc68badced ("mm: mlock: update mlock_pte_range to handle large folio")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The directory this file is in was renamed but the reference didn't get
updated. Fix it.
Link: https://lkml.kernel.org/r/20231022185619.919397-1-vegard.nossum@oracle.com
Fixes: ee65728e10 ("docs: rename Documentation/vm to Documentation/mm")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Wu XiangCheng <bobwxc@email.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For compound pages, the head sets the PG_head flag and the tail sets the
compound_head to indicate the head page. If a user allocates a compound
page and frees it with a different order, the compound page information
will not be properly initialized. To detect this problem,
compound_order(page) and the order argument are compared, but this is not
checked when the order argument is zero. That error should be checked
regardless of the order.
Link: https://lkml.kernel.org/r/20231023083217.1866451-1-hyesoo.yu@samsung.com
Signed-off-by: Hyesoo Yu <hyesoo.yu@samsung.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This removes 2 calls to compound_head() and helps convert khugepaged to
use folios throughout.
Previously, if the address passed to collapse_pte_mapped_thp()
corresponded to a tail page, the scan would fail immediately. Using
filemap_lock_folio() we get the corresponding folio back and try to
operate on the folio instead.
Link: https://lkml.kernel.org/r/20231020183331.10770-6-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Also remove count_memcg_page_event now that its last caller no longer uses
it and reword hpage_collapse_alloc_page() to hpage_collapse_alloc_folio().
This removes 1 call to compound_head() and helps convert khugepaged to
use folios throughout.
Link: https://lkml.kernel.org/r/20231020183331.10770-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both callers of is_refcount_suitable() have been converted to use
folios, so convert it to take in a folio. Both callers only operate on
head pages of folios so mapcount/refcount conversions here are trivial.
Removes 3 calls to compound head, and removes 315 bytes of kernel text.
Link: https://lkml.kernel.org/r/20231020183331.10770-4-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replaces 5 calls to compound_head(), and removes 1385 bytes of kernel
text.
Link: https://lkml.kernel.org/r/20231020183331.10770-3-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Some khugepaged folio conversions", v3.
This patchset converts a number of functions to use folios. This cleans
up some khugepaged code and removes a large number of hidden
compound_head() calls.
This patch (of 5):
Replaces 11 calls to compound_head() with 1, and removes 1348 bytes of
kernel text.
Link: https://lkml.kernel.org/r/20231020183331.10770-1-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20231020183331.10770-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In offline_pages(), if a node becomes memoryless, we will clear its
N_MEMORY state by calling node_states_clear_node(). But we do this
after rebuilding the zonelists by calling build_all_zonelists(), which
will cause this memoryless node to still be in the fallback nodes
(node_order[]) of other nodes.
To drop memoryless nodes from fallback nodes in this case, just call
node_states_clear_node() before calling build_all_zonelists().
In this way, we will not try to allocate pages from memoryless node0,
then the panic mentioned in [1] will also be fixed. Even though this
problem has been solved by dropping the NODE_MIN_SIZE constrain in x86
[2], it would be better to fix it in the core MM as well.
https://lore.kernel.org/all/20230212110305.93670-1-zhengqi.arch@bytedance.com/ [1]
https://lore.kernel.org/all/20231017062215.171670-1-rppt@kernel.org/ [2]
Link: https://lkml.kernel.org/r/9f1dbe7ee1301c7163b2770e32954ff5e3ecf2c4.1697711415.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "handle memoryless nodes more appropriately", v3.
Currently, in the process of initialization or offline memory, memoryless
nodes will still be built into the fallback list of itself or other nodes.
This is not what we expected, so this patch series removes memoryless
nodes from the fallback list entirely.
This patch (of 2):
In find_next_best_node(), we skipped the memoryless nodes when building
the zonelists of other normal nodes (N_NORMAL), but did not skip the
memoryless node itself when building the zonelist. This will cause it to
be traversed at runtime.
For example, say we have node0 and node1, node0 is memoryless
node, then the fallback order of node0 and node1 as follows:
[ 0.153005] Fallback order for Node 0: 0 1
[ 0.153564] Fallback order for Node 1: 1
After this patch, we skip memoryless node0 entirely, then
the fallback order of node0 and node1 as follows:
[ 0.155236] Fallback order for Node 0: 1
[ 0.155806] Fallback order for Node 1: 1
So it becomes completely invisible, which will reduce runtime
overhead.
And in this way, we will not try to allocate pages from memoryless node0,
then the panic mentioned in [1] will also be fixed. Even though this
problem has been solved by dropping the NODE_MIN_SIZE constrain in x86
[2], it would be better to fix it in core MM as well.
[1]. https://lore.kernel.org/all/20230212110305.93670-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/all/20231017062215.171670-1-rppt@kernel.org/
[zhengqi.arch@bytedance.com: update comment, per Ingo]
Link: https://lkml.kernel.org/r/7300fc00a057eefeb9a68c8ad28171c3f0ce66ce.1697799303.git.zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/cover.1697799303.git.zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/cover.1697711415.git.zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/157013e978468241de4a4c05d5337a44638ecb0e.1697711415.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add nr_split to trace_mm_migrate_pages for large folio (including THP)
split events.
[akpm@linux-foundation.org: cleanup per Huang, Ying]
Link: https://lkml.kernel.org/r/20231017163129.2025214-2-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
nr_failed was missing the large folio splits from migrate_pages_batch()
and can cause a mismatch between migrate_pages() return value and the
number of not migrated pages, i.e., when the return value of
migrate_pages() is 0, there are still pages left in the from page list.
It will happen when a non-PMD THP large folio fails to migrate due to
-ENOMEM and is split successfully but not all the split pages are not
migrated, migrate_pages_batch() would return non-zero, but
astats.nr_thp_split = 0. nr_failed would be 0 and returned to the caller
of migrate_pages(), but the not migrated pages are left in the from page
list without being added back to LRU lists.
Fix it by adding a new nr_split counter for large folio splits and adding
it to nr_failed in migrate_page_sync() after migrate_pages_batch() is
done.
Link: https://lkml.kernel.org/r/20231017163129.2025214-1-zi.yan@sent.com
Fixes: 2ef7dbb269 ("migrate_pages: try migrate in batch asynchronously firstly")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In patch (mm: kmemleak: split __create_object into two functions), the
initialisation of object has been splited in two places. Catalin said it
feels a bit weird and error prone. So leave __alloc_object() to just do
the actual allocation and let __link_object() do the full initialisation.
Link: https://lkml.kernel.org/r/20231023025125.90972-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
delete_object_part() can be called by multiple callers in the same time.
If an object is found and removed by a caller, and then another caller try
to find it too, it failed and return directly. It still be recorded by
kmemleak even if it has already been freed to buddy. With DEBUG on,
kmemleak will report the following warning,
kmemleak: Partially freeing unknown object at 0xa1af86000 (size 4096)
CPU: 0 PID: 742 Comm: test_huge Not tainted 6.6.0-rc3kmemleak+ #54
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x37/0x50
kmemleak_free_part_phys+0x50/0x60
hugetlb_vmemmap_optimize+0x172/0x290
? __pfx_vmemmap_remap_pte+0x10/0x10
__prep_new_hugetlb_folio+0xe/0x30
prep_new_hugetlb_folio.isra.0+0xe/0x40
alloc_fresh_hugetlb_folio+0xc3/0xd0
alloc_surplus_hugetlb_folio.constprop.0+0x6e/0xd0
hugetlb_acct_memory.part.0+0xe6/0x2a0
hugetlb_reserve_pages+0x110/0x2c0
hugetlbfs_file_mmap+0x11d/0x1b0
mmap_region+0x248/0x9a0
? hugetlb_get_unmapped_area+0x15c/0x2d0
do_mmap+0x38b/0x580
vm_mmap_pgoff+0xe6/0x190
ksys_mmap_pgoff+0x18a/0x1f0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Expand __create_object() and move __alloc_object() to the beginning. Then
use kmemleak_lock to protect __find_and_remove_object() and
__link_object() as a whole, which can guarantee all objects are processed
sequentialally.
Link: https://lkml.kernel.org/r/20231018102952.3339837-8-liushixin2@huawei.com
Fixes: 53238a60dd ("kmemleak: Allow partial freeing of memory blocks")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add new __find_and_remove_object() without kmemleak_lock protect, it is in
preparation for the next patch.
Link: https://lkml.kernel.org/r/20231018102952.3339837-7-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kmemleak object is allocated by mem_pool_alloc(), which could be from
slab or mem_pool[], so it's not suitable using __kmem_cache_free() to free
the object, use __mem_pool_free() instead.
Link: https://lkml.kernel.org/r/20231018102952.3339837-6-liushixin2@huawei.com
Fixes: 0647398a8c ("mm: kmemleak: simple memory allocation pool for kmemleak objects")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__create_object() consists of two part, the first part allocate a kmemleak
object and initialize it, the second part insert it into object tree.
This function need kmemleak_lock but actually only the second part need
lock.
Split it into two functions, the first function __alloc_object only
allocate a kmemleak object, and the second function __link_object() will
initialize the object and insert it into object tree, use the
kmemleak_lock to protect __link_object() only.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20231018102952.3339837-5-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With 0x%p, the pointer will be hashed and print (____ptrval____) instead.
And with 0x%pa, the pointer can be successfully printed but with duplicate
prefixes, which looks like:
kmemleak: kmemleak_free(0x(____ptrval____))
kmemleak: kmemleak_free_percpu(0x(____ptrval____))
kmemleak: kmemleak_free_part_phys(0x0x0000000a1af86000)
Use 0x%px instead of 0x%p or 0x%pa to print the pointer. Then the print
will be like:
kmemleak: kmemleak_free(0xffff9111c145b020)
kmemleak: kmemleak_free_percpu(0x00000000000333b0)
kmemleak: kmemleak_free_part_phys(0x0000000a1af80000)
Link: https://lkml.kernel.org/r/20231018102952.3339837-4-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Some bugfix about kmemleak", v3.
Some bugfixes for kmemleak and the printed info from debug mode.
This patch (of 7):
Since kmemleak_alloc_phys() rather than kmemleak_alloc() was called from
memblock_alloc_range_nid(), kmemleak_free_part_phys() should be used to
delete kmemleak object in put_page_bootmem(). In debug mode, there are
following warning:
kmemleak: Partially freeing unknown object at 0xffff97345aff7000 (size 4096)
Link: https://lkml.kernel.org/r/20231018102952.3339837-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20231018102952.3339837-2-liushixin2@huawei.com
Fixes: dd0ff4d12d ("bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since all calls use folio_xchg_last_cpupid(), remove
page_cpupid_xchg_last().
Link: https://lkml.kernel.org/r/20231018140806.2783514-20-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert to use folio_xchg_last_cpupid() in wp_page_reuse(), and remove
page variable. Since now only normal and PMD-mapped page is handled by
numa balancing, it's enough to only update the entire folio's last cpupid.
Link: https://lkml.kernel.org/r/20231018140806.2783514-19-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Saves one compound_head() call, also in preparation for
page_cpupid_xchg_last() conversion.
Link: https://lkml.kernel.org/r/20231018140806.2783514-18-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make finish_mkwrite_fault static since it is not used outside of
memory.c.
Link: https://lkml.kernel.org/r/20231018140806.2783514-17-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert to use folio_xchg_last_cpupid() in __split_huge_page_tail().
Link: https://lkml.kernel.org/r/20231018140806.2783514-16-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert to use folio_xchg_last_cpupid() in folio_migrate_flags(), also
directly use folio_nid() instead of page_to_nid(&folio->page).
Link: https://lkml.kernel.org/r/20231018140806.2783514-15-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use a folio in change_huge_pmd(), which helps to remove last
xchg_page_access_time() caller.
Link: https://lkml.kernel.org/r/20231018140806.2783514-11-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use a folio in change_pte_range() to save three compound_head() calls.
Since now only normal and PMD-mapped page is handled by numa balancing,
it is enough to only update the entire folio's access time.
Link: https://lkml.kernel.org/r/20231018140806.2783514-10-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert to use folio_last_cpupid() in __split_huge_page_tail().
Link: https://lkml.kernel.org/r/20231018140806.2783514-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert to use folio_last_cpupid() in do_huge_pmd_numa_page().
Link: https://lkml.kernel.org/r/20231018140806.2783514-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert to use folio_last_cpupid() in do_numa_page().
Link: https://lkml.kernel.org/r/20231018140806.2783514-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A variable is never used for swapout path (shadowp is NULL) and compiler
is unable to optimize out the unneeded load since it's a function call.
The was introduced by 3852f6768e ("mm/swapcache: support to handle the
shadow entries").
Link: https://lkml.kernel.org/r/20231017011728.37508-1-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reimplement get_obj_cgroup_from_current() using current_obj_cgroup().
get_obj_cgroup_from_current() and current_obj_cgroup() share 80% of the
code, so the new implementation is almost trivial.
get_obj_cgroup_from_current() is a convenient function used by the
bpf subsystem, so there is no reason to get rid of it completely.
Link: https://lkml.kernel.org/r/20231019225346.1822282-7-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Similar to slab and kmem, switch to a scope-based protection of the objcg
pointer to avoid.
Link: https://lkml.kernel.org/r/20231019225346.1822282-6-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Switch to a scope-based protection of the objcg pointer on slab/kmem
allocation paths. Instead of using the get_() semantics in the
pre-allocation hook and put the reference afterwards, let's rely on the
fact that objcg is pinned by the scope.
It's possible because:
1) if the objcg is received from the current task struct, the task is
keeping a reference to the objcg.
2) if the objcg is received from an active memcg (remote charging),
the memcg is pinned by the scope and has a reference to the
corresponding objcg.
Link: https://lkml.kernel.org/r/20231019225346.1822282-5-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Keep a reference to the original objcg object for the entire life of a
memcg structure.
This allows to simplify the synchronization on the kernel memory
allocation paths: pinning a (live) memcg will also pin the corresponding
objcg.
The memory overhead of this change is minimal because object cgroups
usually outlive their corresponding memory cgroups even without this
change, so it's only an additional pointer per memcg.
Link: https://lkml.kernel.org/r/20231019225346.1822282-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To charge a freshly allocated kernel object to a memory cgroup, the kernel
needs to obtain an objcg pointer. Currently it does it indirectly by
obtaining the memcg pointer first and then calling to
__get_obj_cgroup_from_memcg().
Usually tasks spend their entire life belonging to the same object cgroup.
So it makes sense to save the objcg pointer on task_struct directly, so
it can be obtained faster. It requires some work on fork, exit and cgroup
migrate paths, but these paths are way colder.
To avoid any costly synchronization the following rules are applied:
1) A task sets it's objcg pointer itself.
2) If a task is being migrated to another cgroup, the least
significant bit of the objcg pointer is set atomically.
3) On the allocation path the objcg pointer is obtained locklessly
using the READ_ONCE() macro and the least significant bit is
checked. If it's set, the following procedure is used to update
it locklessly:
- task->objcg is zeroed using cmpxcg
- new objcg pointer is obtained
- task->objcg is updated using try_cmpxchg
- operation is repeated if try_cmpxcg fails
It guarantees that no updates will be lost if task migration
is racing against objcg pointer update. It also allows to keep
both read and write paths fully lockless.
Because the task is keeping a reference to the objcg, it can't go away
while the task is alive.
This commit doesn't change the way the remote memcg charging works.
Link: https://lkml.kernel.org/r/20231019225346.1822282-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: improve performance of accounted kernel memory
allocations", v5.
This patchset improves the performance of accounted kernel memory
allocations by ~30% as measured by a micro-benchmark [1]. The benchmark
is very straightforward: 1M of 64 bytes-large kmalloc() allocations.
Below are results with the disabled kernel memory accounting, the original state
and with this patchset applied.
| | Kmem disabled | Original | Patched | Delta |
|-------------+---------------+----------+---------+--------|
| User cgroup | 29764 | 84548 | 59078 | -30.0% |
| Root cgroup | 29742 | 48342 | 31501 | -34.8% |
As we can see, the patchset removes the majority of the overhead when
there is no actual accounting (a task belongs to the root memory cgroup)
and almost halves the accounting overhead otherwise.
The main idea is to get rid of unnecessary memcg to objcg conversions and
switch to a scope-based protection of objcgs, which eliminates extra
operations with objcg reference counters under a rcu read lock. More
details are provided in individual commit descriptions.
This patch (of 5):
Manually inline memcg_kmem_bypass() and active_memcg() to speed up
get_obj_cgroup_from_current() by avoiding duplicate in_task() checks and
active_memcg() readings.
Also add a likely() macro to __get_obj_cgroup_from_memcg():
obj_cgroup_tryget() should succeed at almost all times except a very
unlikely race with the memcg deletion path.
Link: https://lkml.kernel.org/r/20231019225346.1822282-1-roman.gushchin@linux.dev
Link: https://lkml.kernel.org/r/20231019225346.1822282-2-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In current PCP auto-tuning design, if the number of pages allocated is
much more than that of pages freed on a CPU, the PCP high may become the
maximal value even if the allocating/freeing depth is small, for example,
in the sender of network workloads. If a CPU was used as sender
originally, then it is used as receiver after context switching, we need
to fill the whole PCP with maximal high before triggering PCP draining for
consecutive high order freeing. This will hurt the performance of some
network workloads.
To solve the issue, in this patch, we will track the consecutive page
freeing with a counter in stead of relying on PCP draining. So, we can
detect consecutive page freeing much earlier.
On a 2-socket Intel server with 128 logical CPU, we tested
SCTP_STREAM_MANY test case of netperf test suite with 64-pair processes.
With the patch, the network bandwidth improves 5.0%. This restores the
performance drop caused by PCP auto-tuning.
Link: https://lkml.kernel.org/r/20231016053002.756205-10-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
One target of PCP is to minimize pages in PCP if the system free pages is
too few. To reach that target, when page reclaiming is active for the
zone (ZONE_RECLAIM_ACTIVE), we will stop increasing PCP high in allocating
path, decrease PCP high and free some pages in freeing path. But this may
be too late because the background page reclaiming may introduce latency
for some workloads. So, in this patch, during page allocation we will
detect whether the number of free pages of the zone is below high
watermark. If so, we will stop increasing PCP high in allocating path,
decrease PCP high and free some pages in freeing path. With this, we can
reduce the possibility of the premature background page reclaiming caused
by too large PCP.
The high watermark checking is done in allocating path to reduce the
overhead in hotter freeing path.
Link: https://lkml.kernel.org/r/20231016053002.756205-9-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The target to tune PCP high automatically is as follows,
- Minimize allocation/freeing from/to shared zone
- Minimize idle pages in PCP
- Minimize pages in PCP if the system free pages is too few
To reach these target, a tuning algorithm as follows is designed,
- When we refill PCP via allocating from the zone, increase PCP high.
Because if we had larger PCP, we could avoid to allocate from the
zone.
- In periodic vmstat updating kworker (via refresh_cpu_vm_stats()),
decrease PCP high to try to free possible idle PCP pages.
- When page reclaiming is active for the zone, stop increasing PCP
high in allocating path, decrease PCP high and free some pages in
freeing path.
So, the PCP high can be tuned to the page allocating/freeing depth of
workloads eventually.
One issue of the algorithm is that if the number of pages allocated is
much more than that of pages freed on a CPU, the PCP high may become the
maximal value even if the allocating/freeing depth is small. But this
isn't a severe issue, because there are no idle pages in this case.
One alternative choice is to increase PCP high when we drain PCP via
trying to free pages to the zone, but don't increase PCP high during PCP
refilling. This can avoid the issue above. But if the number of pages
allocated is much less than that of pages freed on a CPU, there will be
many idle pages in PCP and it is hard to free these idle pages.
1/8 (>> 3) of PCP high will be decreased periodically. The value 1/8 is
kind of arbitrary. Just to make sure that the idle PCP pages will be
freed eventually.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
build time decreases 3.5%. The cycles% of the spinlock contention (mostly
for zone lock) decreases from 11.0% to 0.5%. The number of PCP draining
for high order pages freeing (free_high) decreases 65.6%. The number of
pages allocated from zone (instead of from PCP) decreases 83.9%.
Link: https://lkml.kernel.org/r/20231016053002.756205-8-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Suggested-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page allocation performance requirements of different workloads are
usually different. So, we need to tune PCP (per-CPU pageset) high to
optimize the workload page allocation performance. Now, we have a system
wide sysctl knob (percpu_pagelist_high_fraction) to tune PCP high by hand.
But, it's hard to find out the best value by hand. And one global
configuration may not work best for the different workloads that run on
the same system. One solution to these issues is to tune PCP high of each
CPU automatically.
This patch adds the framework for PCP high auto-tuning. With it,
pcp->high of each CPU will be changed automatically by tuning algorithm at
runtime. The minimal high (pcp->high_min) is the original PCP high value
calculated based on the low watermark pages. While the maximal high
(pcp->high_max) is the PCP high value when percpu_pagelist_high_fraction
sysctl knob is set to MIN_PERCPU_PAGELIST_HIGH_FRACTION. That is, the
maximal pcp->high that can be set via sysctl knob by hand.
It's possible that PCP high auto-tuning doesn't work well for some
workloads. So, when PCP high is tuned by hand via the sysctl knob, the
auto-tuning will be disabled. The PCP high set by hand will be used
instead.
This patch only adds the framework, so pcp->high will be set to
pcp->high_min (original default) always. We will add actual auto-tuning
algorithm in the following patches in the series.
Link: https://lkml.kernel.org/r/20231016053002.756205-7-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a task is allocating a large number of order-0 pages, it may acquire
the zone->lock multiple times allocating pages in batches. This may
unnecessarily contend on the zone lock when allocating very large number
of pages. This patch adapts the size of the batch based on the recent
pattern to scale the batch size for subsequent allocations.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
cycles% of the spinlock contention (mostly for zone lock) decreases from
12.6% to 11.0% (with PCP size == 367).
Link: https://lkml.kernel.org/r/20231016053002.756205-6-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In page allocator, PCP (Per-CPU Pageset) is refilled and drained in
batches to increase page allocation throughput, reduce page
allocation/freeing latency per page, and reduce zone lock contention. But
too large batch size will cause too long maximal allocation/freeing
latency, which may punish arbitrary users. So the default batch size is
chosen carefully (in zone_batchsize(), the value is 63 for zone > 1GB) to
avoid that.
In commit 3b12e7e979 ("mm/page_alloc: scale the number of pages that are
batch freed"), the batch size will be scaled for large number of page
freeing to improve page freeing performance and reduce zone lock
contention. Similar optimization can be used for large number of pages
allocation too.
To find out a suitable max batch scale factor (that is, max effective
batch size), some tests and measurement on some machines were done as
follows.
A set of debug patches are implemented as follows,
- Set PCP high to be 2 * batch to reduce the effect of PCP high
- Disable free batch size scaling to get the raw performance.
- The code with zone lock held is extracted from rmqueue_bulk() and
free_pcppages_bulk() to 2 separate functions to make it easy to
measure the function run time with ftrace function_graph tracer.
- The batch size is hard coded to be 63 (default), 127, 255, 511,
1023, 2047, 4095.
Then will-it-scale/page_fault1 is used to generate the page
allocation/freeing workload. The page allocation/freeing throughput
(page/s) is measured via will-it-scale. The page allocation/freeing
average latency (alloc/free latency avg, in us) and allocation/freeing
latency at 99 percentile (alloc/free latency 99%, in us) are measured with
ftrace function_graph tracer.
The test results are as follows,
Sapphire Rapids Server
======================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 513633.4 2.33 3.57 2.67 6.83
127 517616.7 4.35 6.65 4.22 13.03
255 520822.8 8.29 13.32 7.52 25.24
511 524122.0 15.79 23.42 14.02 49.35
1023 525980.5 30.25 44.19 25.36 94.88
2047 526793.6 59.39 84.50 45.22 140.81
Ice Lake Server
===============
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 620210.3 2.21 3.68 2.02 4.35
127 627003.0 4.09 6.86 3.51 8.28
255 630777.5 7.70 13.50 6.17 15.97
511 633651.5 14.85 22.62 11.66 31.08
1023 637071.1 28.55 42.02 20.81 54.36
2047 638089.7 56.54 84.06 39.28 91.68
Cascade Lake Server
===================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 404706.7 3.29 5.03 3.53 4.75
127 422475.2 6.12 9.09 6.36 8.76
255 411522.2 11.68 16.97 10.90 16.39
511 428124.1 22.54 31.28 19.86 32.25
1023 414718.4 43.39 62.52 40.00 66.33
2047 429848.7 86.64 120.34 71.14 106.08
Commet Lake Desktop
===================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 795183.13 2.18 3.55 2.03 3.05
127 803067.85 3.91 6.56 3.85 5.52
255 812771.10 7.35 10.80 7.14 10.20
511 817723.48 14.17 27.54 13.43 30.31
1023 818870.19 27.72 40.10 27.89 46.28
Coffee Lake Desktop
===================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 510542.8 3.13 4.40 2.48 3.43
127 514288.6 5.97 7.89 4.65 6.04
255 516889.7 11.86 15.58 8.96 12.55
511 519802.4 23.10 28.81 16.95 26.19
1023 520802.7 45.30 52.51 33.19 45.95
2047 519997.1 90.63 104.00 65.26 81.74
From the above data, to restrict the allocation/freeing latency to be less
than 100 us in most times, the max batch scale factor needs to be less
than or equal to 5.
Although it is reasonable to use 5 as max batch scale factor for the
systems tested, there are also slower systems. Where smaller value should
be used to constrain the page allocation/freeing latency.
So, in this patch, a new kconfig option (PCP_BATCH_SCALE_MAX) is added to
set the max batch scale factor. Whose default value is 5, and users can
reduce it when necessary.
Link: https://lkml.kernel.org/r/20231016053002.756205-5-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In commit f26b3fa046 ("mm/page_alloc: limit number of high-order pages
on PCP during bulk free"), the PCP (Per-CPU Pageset) will be drained when
PCP is mostly used for high-order pages freeing to improve the cache-hot
pages reusing between page allocating and freeing CPUs.
On system with small per-CPU data cache slice, pages shouldn't be cached
before draining to guarantee cache-hot. But on a system with large
per-CPU data cache slice, some pages can be cached before draining to
reduce zone lock contention.
So, in this patch, instead of draining without any caching, "pcp->batch"
pages will be cached in PCP before draining if the size of the per-CPU
data cache slice is more than "3 * batch".
In theory, if the size of per-CPU data cache slice is more than "2 *
batch", we can reuse cache-hot pages between CPUs. But considering the
other usage of cache (code, other data accessing, etc.), "3 * batch" is
used.
Note: "3 * batch" is chosen to make sure the optimization works on recent
x86_64 server CPUs. If you want to increase it, please check whether it
breaks the optimization.
On a 2-socket Intel server with 128 logical CPU, with the patch, the
network bandwidth of the UNIX (AF_UNIX) test case of lmbench test suite
with 16-pair processes increase 70.5%. The cycles% of the spinlock
contention (mostly for zone lock) decreases from 46.1% to 21.3%. The
number of PCP draining for high order pages freeing (free_high) decreases
89.9%. The cache miss rate keeps 0.2%.
Link: https://lkml.kernel.org/r/20231016053002.756205-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: PCP high auto-tuning", v3.
The page allocation performance requirements of different workloads are
often different. So, we need to tune the PCP (Per-CPU Pageset) high on
each CPU automatically to optimize the page allocation performance.
The list of patches in series is as follows,
[1/9] mm, pcp: avoid to drain PCP when process exit
[2/9] cacheinfo: calculate per-CPU data cache size
[3/9] mm, pcp: reduce lock contention for draining high-order pages
[4/9] mm: restrict the pcp batch scale factor to avoid too long latency
[5/9] mm, page_alloc: scale the number of pages that are batch allocated
[6/9] mm: add framework for PCP high auto-tuning
[7/9] mm: tune PCP high automatically
[8/9] mm, pcp: decrease PCP high if free pages < high watermark
[9/9] mm, pcp: reduce detecting time of consecutive high order page freeing
Patch [1/9], [2/9], [3/9] optimize the PCP draining for consecutive
high-order pages freeing.
Patch [4/9], [5/9] optimize batch freeing and allocating.
Patch [6/9], [7/9], [8/9] implement and optimize a PCP high
auto-tuning method.
Patch [9/9] optimize the PCP draining for consecutive high order page
freeing based on PCP high auto-tuning.
The test results for patches with performance impact are as follows,
kbuild
======
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service.
build time lock contend% free_high alloc_zone
---------- ---------- --------- ----------
base 100.0 14.0 100.0 100.0
patch1 99.5 12.8 19.5 95.6
patch3 99.4 12.6 7.1 95.6
patch5 98.6 11.0 8.1 97.1
patch7 95.1 0.5 2.8 15.6
patch9 95.0 1.0 8.8 20.0
The PCP draining optimization (patch [1/9], [3/9]) and PCP batch
allocation optimization (patch [5/9]) reduces zone lock contention a
little. The PCP high auto-tuning (patch [7/9], [9/9]) reduces build time
visibly. Where the tuning target: the number of pages allocated from zone
reduces greatly. So, the zone contention cycles% reduces greatly.
With PCP tuning patches (patch [7/9], [9/9]), the average used memory
during test increases up to 18.4% because more pages are cached in PCP.
But at the end of the test, the number of the used memory decreases to the
same level as that of the base patch. That is, the pages cached in PCP
will be released to zone after not being used actively.
netperf SCTP_STREAM_MANY
========================
On a 2-socket Intel server with 128 logical CPU, we tested
SCTP_STREAM_MANY test case of netperf test suite with 64-pair processes.
score lock contend% free_high alloc_zone cache miss rate%
----- ---------- --------- ---------- ----------------
base 100.0 2.1 100.0 100.0 1.3
patch1 99.4 2.1 99.4 99.4 1.3
patch3 106.4 1.3 13.3 106.3 1.3
patch5 106.0 1.2 13.2 105.9 1.3
patch7 103.4 1.9 6.7 90.3 7.6
patch9 108.6 1.3 13.7 108.6 1.3
The PCP draining optimization (patch [1/9]+[3/9]) improves performance.
The PCP high auto-tuning (patch [7/9]) reduces performance a little
because PCP draining cannot be triggered in time sometimes. So, the cache
miss rate% increases. The further PCP draining optimization (patch [9/9])
based on PCP tuning restore the performance.
lmbench3 UNIX (AF_UNIX)
=======================
On a 2-socket Intel server with 128 logical CPU, we tested UNIX
(AF_UNIX socket) test case of lmbench3 test suite with 16-pair
processes.
score lock contend% free_high alloc_zone cache miss rate%
----- ---------- --------- ---------- ----------------
base 100.0 51.4 100.0 100.0 0.2
patch1 116.8 46.1 69.5 104.3 0.2
patch3 199.1 21.3 7.0 104.9 0.2
patch5 200.0 20.8 7.1 106.9 0.3
patch7 191.6 19.9 6.8 103.8 2.8
patch9 193.4 21.7 7.0 104.7 2.1
The PCP draining optimization (patch [1/9], [3/9]) improves performance
much. The PCP tuning (patch [7/9]) reduces performance a little because
PCP draining cannot be triggered in time sometimes. The further PCP
draining optimization (patch [9/9]) based on PCP tuning restores the
performance partly.
The patchset adds several fields in struct per_cpu_pages. The struct
layout before/after the patchset is as follows,
base
====
struct per_cpu_pages {
spinlock_t lock; /* 0 4 */
int count; /* 4 4 */
int high; /* 8 4 */
int batch; /* 12 4 */
short int free_factor; /* 16 2 */
short int expire; /* 18 2 */
/* XXX 4 bytes hole, try to pack */
struct list_head lists[13]; /* 24 208 */
/* size: 256, cachelines: 4, members: 7 */
/* sum members: 228, holes: 1, sum holes: 4 */
/* padding: 24 */
} __attribute__((__aligned__(64)));
patched
=======
struct per_cpu_pages {
spinlock_t lock; /* 0 4 */
int count; /* 4 4 */
int high; /* 8 4 */
int high_min; /* 12 4 */
int high_max; /* 16 4 */
int batch; /* 20 4 */
u8 flags; /* 24 1 */
u8 alloc_factor; /* 25 1 */
u8 expire; /* 26 1 */
/* XXX 1 byte hole, try to pack */
short int free_count; /* 28 2 */
/* XXX 2 bytes hole, try to pack */
struct list_head lists[13]; /* 32 208 */
/* size: 256, cachelines: 4, members: 11 */
/* sum members: 237, holes: 2, sum holes: 3 */
/* padding: 16 */
} __attribute__((__aligned__(64)));
The size of the struct doesn't changed with the patchset.
This patch (of 9):
In commit f26b3fa046 ("mm/page_alloc: limit number of high-order pages
on PCP during bulk free"), the PCP (Per-CPU Pageset) will be drained when
PCP is mostly used for high-order pages freeing to improve the cache-hot
pages reusing between page allocation and freeing CPUs.
But, the PCP draining mechanism may be triggered unexpectedly when process
exits. With some customized trace point, it was found that PCP draining
(free_high == true) was triggered with the order-1 page freeing with the
following call stack,
=> free_unref_page_commit
=> free_unref_page
=> __mmdrop
=> exit_mm
=> do_exit
=> do_group_exit
=> __x64_sys_exit_group
=> do_syscall_64
Checking the source code, this is the page table PGD freeing
(mm_free_pgd()). It's a order-1 page freeing if
CONFIG_PAGE_TABLE_ISOLATION=y. Which is a common configuration for
security.
Just before that, page freeing with the following call stack was found,
=> free_unref_page_commit
=> free_unref_page_list
=> release_pages
=> tlb_batch_pages_flush
=> tlb_finish_mmu
=> exit_mmap
=> __mmput
=> exit_mm
=> do_exit
=> do_group_exit
=> __x64_sys_exit_group
=> do_syscall_64
So, when a process exits,
- a large number of user pages of the process will be freed without
page allocation, it's highly possible that pcp->free_factor becomes >
0. In fact, this is expected behavior to improve process exit
performance.
- after freeing all user pages, the PGD will be freed, which is a
order-1 page freeing, PCP will be drained.
All in all, when a process exits, it's high possible that the PCP will be
drained. This is an unexpected behavior.
To avoid this, in the patch, the PCP draining will only be triggered for 2
consecutive high-order page freeing.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
cycles% of the spinlock contention (mostly for zone lock) decreases from
14.0% to 12.8% (with PCP size == 367). The number of PCP draining for
high order pages freeing (free_high) decreases 80.5%.
This helps network workload too for reduced zone lock contention. On a
2-socket Intel server with 128 logical CPU, with the patch, the network
bandwidth of the UNIX (AF_UNIX) test case of lmbench test suite with
16-pair processes increase 16.8%. The cycles% of the spinlock contention
(mostly for zone lock) decreases from 51.4% to 46.1%. The number of PCP
draining for high order pages freeing (free_high) decreases 30.5%. The
cache miss rate keeps 0.2%.
Link: https://lkml.kernel.org/r/20231016053002.756205-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20231016053002.756205-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is only one caller wants to dump the kill victim info, so just let
it call the standalone helper, no need to make the generic info dump
helper take an extra argument for that.
Result of bloat-o-meter:
./scripts/bloat-o-meter ./mm/oom_kill.old.o ./mm/oom_kill.o
add/remove: 0/0 grow/shrink: 1/2 up/down: 131/-142 (-11)
Function old new delta
oom_kill_process 412 543 +131
out_of_memory 1422 1418 -4
dump_header 562 424 -138
Total: Before=21514, After=21503, chg -0.05%
Link: https://lkml.kernel.org/r/20231016113103.86477-1-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Given large enough allocations and a machine with low enough memory (i.e a
default QEMU VM), it's entirely possible that
kmsan_init_alloc_meta_for_range's shadow+origin allocation fails.
Instead of eating a NULL deref kernel oops, check explicitly for
memblock_alloc() failure and panic with a nice error message.
Alexander Potapenko said:
For posterity, it is generally quite important for the allocated shadow
and origin to be contiguous, otherwise an unaligned memory write may
result in memory corruption (the corresponding unaligned shadow write will
be assuming that shadow pages are adjacent). So instead of panicking we
could have split the range into smaller ones until the allocation
succeeds, but that would've led to hard-to-debug problems in the future.
Link: https://lkml.kernel.org/r/20231016153446.132763-1-pedro.falcato@gmail.com
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both callers already have a folio, so pass it in and use it directly.
Removes a lot of hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231016201114.1928083-13-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Most function calls in hugetlb.c are made with folio arguments. This
brings hugetlb_vmemmap calls inline with them by using folio instead of
head struct page. Head struct page is still needed within these
functions.
The set/clear/test functions for hugepages are also changed to folio
versions.
Link: https://lkml.kernel.org/r/20231011144557.1720481-2-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the internal hugetlb restore vmemmap code path such that TLB
flushing can be batched. Use the existing mechanism of passing the
VMEMMAP_REMAP_NO_TLB_FLUSH flag to indicate flushing should not be
performed for individual pages. The routine
hugetlb_vmemmap_restore_folios is the only user of this new mechanism, and
it will perform a global flush after all vmemmap is restored.
Link: https://lkml.kernel.org/r/20231019023113.345257-9-mike.kravetz@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that a list of pages is deduplicated at once, the TLB flush can be
batched for all vmemmap pages that got remapped.
Expand the flags field value to pass whether to skip the TLB flush on
remap of the PTE.
The TLB flush is global as we don't have guarantees from caller that the
set of folios is contiguous, or to add complexity in composing a list of
kVAs to flush.
Modified by Mike Kravetz to perform TLB flush on single folio if an
error is encountered.
Link: https://lkml.kernel.org/r/20231019023113.345257-8-mike.kravetz@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In an effort to minimize amount of TLB flushes, batch all PMD splits
belonging to a range of pages in order to perform only 1 (global) TLB
flush.
Add a flags field to the walker and pass whether it's a bulk allocation or
just a single page to decide to remap. First value
(VMEMMAP_SPLIT_NO_TLB_FLUSH) designates the request to not do the TLB
flush when we split the PMD.
Rebased and updated by Mike Kravetz
Link: https://lkml.kernel.org/r/20231019023113.345257-7-mike.kravetz@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that batching of hugetlb vmemmap optimization processing is possible,
batch the freeing of vmemmap pages. When freeing vmemmap pages for a
hugetlb page, we add them to a list that is freed after the entire batch
has been processed.
This enhances the ability to return contiguous ranges of memory to the low
level allocators.
Link: https://lkml.kernel.org/r/20231019023113.345257-6-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The routine update_and_free_pages_bulk already performs vmemmap
restoration on the list of hugetlb pages in a separate step. In
preparation for more functionality to be added in this step, create a new
routine hugetlb_vmemmap_restore_folios() that will restore vmemmap for a
list of folios.
This new routine must provide sufficient feedback about errors and actual
restoration performed so that update_and_free_pages_bulk can perform
optimally.
Special care must be taken when encountering an error from
hugetlb_vmemmap_restore_folios. We want to continue making as much
forward progress as possible. A new routine bulk_vmemmap_restore_error
handles this specific situation.
Link: https://lkml.kernel.org/r/20231019023113.345257-5-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When adding hugetlb pages to the pool, we first create a list of the
allocated pages before adding to the pool. Pass this list of pages to a
new routine hugetlb_vmemmap_optimize_folios() for vmemmap optimization.
Due to significant differences in vmemmmap initialization for bootmem
allocated hugetlb pages, a new routine prep_and_add_bootmem_folios is
created.
We also modify the routine vmemmap_should_optimize() to check for pages
that are already optimized. There are code paths that might request
vmemmap optimization twice and we want to make sure this is not attempted.
Link: https://lkml.kernel.org/r/20231019023113.345257-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allocation of a hugetlb page for the hugetlb pool is done by the routine
alloc_pool_huge_page. This routine will allocate contiguous pages from a
low level allocator, prep the pages for usage as a hugetlb page and then
add the resulting hugetlb page to the pool.
In the 'prep' stage, optional vmemmap optimization is done. For
performance reasons we want to perform vmemmap optimization on multiple
hugetlb pages at once. To do this, restructure the hugetlb pool
allocation code such that vmemmap optimization can be isolated and later
batched.
The code to allocate hugetlb pages from bootmem was also modified to
allow batching.
No functional changes, only code restructure.
Link: https://lkml.kernel.org/r/20231019023113.345257-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Batch hugetlb vmemmap modification operations", v8.
When hugetlb vmemmap optimization was introduced, the overhead of enabling
the option was measured as described in commit 426e5c429d [1]. The
summary states that allocating a hugetlb page should be ~2x slower with
optimization and freeing a hugetlb page should be ~2-3x slower. Such
overhead was deemed an acceptable trade off for the memory savings
obtained by freeing vmemmap pages.
It was recently reported that the overhead associated with enabling
vmemmap optimization could be as high as 190x for hugetlb page
allocations. Yes, 190x! Some actual numbers from other environments are:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.119s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.477s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m28.973s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m36.748s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.463s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m2.931s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 2m27.609s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 2m29.924s
In the VM environment, the slowdown of enabling hugetlb vmemmap optimization
resulted in allocation times being 61x slower.
A quick profile showed that the vast majority of this overhead was due to
TLB flushing. Each time we modify the kernel pagetable we need to flush
the TLB. For each hugetlb that is optimized, there could be potentially
two TLB flushes performed. One for the vmemmap pages associated with the
hugetlb page, and potentially another one if the vmemmap pages are mapped
at the PMD level and must be split. The TLB flushes required for the
kernel pagetable, result in a broadcast IPI with each CPU having to flush
a range of pages, or do a global flush if a threshold is exceeded. So,
the flush time increases with the number of CPUs. In addition, in virtual
environments the broadcast IPI can’t be accelerated by hypervisor
hardware and leads to traps that need to wakeup/IPI all vCPUs which is
very expensive. Because of this the slowdown in virtual environments is
even worse than bare metal as the number of vCPUS/CPUs is increased.
The following series attempts to reduce amount of time spent in TLB
flushing. The idea is to batch the vmemmap modification operations for
multiple hugetlb pages. Instead of doing one or two TLB flushes for each
page, we do two TLB flushes for each batch of pages. One flush after
splitting pages mapped at the PMD level, and another after remapping
vmemmap associated with all hugetlb pages. Results of such batching are
as follows:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.719s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.245s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m7.267s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m13.199s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.715s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m3.186s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m4.799s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m5.273s
With batching, results are back in the 2-3x slowdown range.
This patch (of 8):
update_and_free_pages_bulk is designed to free a list of hugetlb pages
back to their associated lower level allocators. This may require
allocating vmemmmap pages associated with each hugetlb page. The hugetlb
page destructor must be changed before pages are freed to lower level
allocators. However, the destructor must be changed under the hugetlb
lock. This means there is potentially one lock cycle per page.
Minimize the number of lock cycles in update_and_free_pages_bulk by:
1) allocating necessary vmemmap for all hugetlb pages on the list
2) take hugetlb lock and clear destructor for all pages on the list
3) free all pages on list back to low level allocators
Link: https://lkml.kernel.org/r/20231019023113.345257-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20231019023113.345257-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If there is no memory allocation/freeing in the PCP (Per-CPU Pageset) of a
remote zone (zone in remote NUMA node) after some time (3 seconds for
now), the pages of the PCP of the remote zone will be drained to avoid
memory wastage.
This behavior was introduced in the commit 4ae7c03943 ("[PATCH]
Periodically drain non local pagesets") and the commit 4037d45220 ("Move
remote node draining out of slab allocators")
But, after the commit 7cc36bbddd ("vmstat: on-demand vmstat workers
V8"), the vmstat updater worker which is used to drain the PCP of remote
zones may not be re-queued when we are waiting for the timeout
(pcp->expire != 0) if there are no vmstat changes on this CPU, for
example, when the CPU goes idle or runs user space only workloads. This
may cause the pages of a remote zone be kept in PCP of this CPU for long
time. So that, the page reclaiming of the remote zone may be triggered
prematurely. This isn't a severe problem in practice, because the PCP of
the remote zone will be drained if some memory are allocated/freed again
on this CPU. And, the PCP will eventually be drained during the direct
reclaiming if necessary.
Anyway, the problem still deserves a fix via guaranteeing that the vmstat
updater worker will always be re-queued when we are waiting for the
timeout. In effect, this restores the original behavior before the commit
7cc36bbddd.
We can reproduce the bug via allocating/freeing pages from a remote zone
then go idle as follows. And the patch can fix it.
- Run some workloads, use `numactl` to bind CPU to node 0 and memory to
node 1. So the PCP of the CPU on node 0 for zone on node 1 will be
filled.
- After workloads finish, idle for 60s
- Check /proc/zoneinfo
With the original kernel, the number of pages in the PCP of the CPU on
node 0 for zone on node 1 is non-zero after idle. With the patched
kernel, it becomes 0 after idle. That is, we avoid to keep pages in the
remote PCP during idle.
Link: https://lkml.kernel.org/r/20231007062356.187621-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230811090819.60845-1-ying.huang@intel.com
Fixes: 7cc36bbddd ("vmstat: on-demand vmstat workers V8")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
or aren't considered necessary for earlier kernel versions.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZTfz/QAKCRDdBJ7gKXxA
joMyAP99hLaLYeJbjlf+4tLJzhlpbVoFra1ieun2D+ZgFE78xQD/T4T3PYrZhYqD
WdrxGT9fiKOykXM5pmQRH9Zr4EvJBA0=
=Obbk
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 12 are cc:stable and the remainder address post-6.5
issues or aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()
selftests/mm: include mman header to access MREMAP_DONTUNMAP identifier
mailmap: correct email aliasing for Oleksij Rempel
mailmap: map Bartosz's old address to the current one
mm/damon/sysfs: check DAMOS regions update progress from before_terminate()
MAINTAINERS: Ondrej has moved
kasan: disable kasan_non_canonical_hook() for HW tags
kasan: print the original fault addr when access invalid shadow
hugetlbfs: close race between MADV_DONTNEED and page fault
hugetlbfs: extend hugetlb_vma_lock to private VMAs
hugetlbfs: clear resv_map pointer if mmap fails
mm: zswap: fix pool refcount bug around shrink_worker()
mm/migrate: fix do_pages_move for compat pointers
riscv: fix set_huge_pte_at() for NAPOT mappings when a swap entry is set
riscv: handle VM_FAULT_[HWPOISON|HWPOISON_LARGE] faults instead of panicking
mmap: fix error paths with dup_anon_vma()
mmap: fix vma_iterator in error path of vma_merge()
mm: fix vm_brk_flags() to not bail out while holding lock
mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer
mm/page_alloc: correct start page when guard page debug is enabled
Introduce pcpu_alloc_size() to get the size of the dynamic per-cpu
area. It will be used by bpf memory allocator in the following patches.
BPF memory allocator maintains per-cpu area caches for multiple area
sizes and its free API only has the to-be-freed per-cpu pointer, so it
needs the size of dynamic per-cpu area to select the corresponding cache
when bpf program frees the dynamic per-cpu pointer.
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no need to acquire pcpu_lock for pcpu_chunk_addr_search():
1) both pcpu_first_chunk & pcpu_reserved_chunk must have been
initialized before the invocation of free_percpu().
2) The dynamically-created chunk must be valid before the per-cpu
pointers allocated from it are freed.
So acquire pcpu_lock() after the invocation of pcpu_chunk_addr_search().
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Readahead was factored to call generic_fadvise. That refactor added an
S_ISREG restriction which broke readahead on block devices.
In addition to S_ISREG, this change checks S_ISBLK to fix block device
readahead. There is no change in behavior with any file type besides block
devices in this change.
Fixes: 3d8f761531 ("vfs: implement readahead(2) using POSIX_FADV_WILLNEED")
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Link: https://lore.kernel.org/r/20231003015704.2415-1-reubenhwk@gmail.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
__read_mostly predates __ro_after_init. Many variables which are marked
__read_mostly should have been __ro_after_init from day 1.
Also, mark some stuff as "const" and "__init" while I'm at it.
[akpm@linux-foundation.org: revert sysctl_nr_open_min, sysctl_nr_open_max changes due to arm warning]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/4f6bb9c0-abba-4ee4-a7aa-89265e886817@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order for a F_SEAL_WRITE sealed memfd mapping to have an opportunity to
clear VM_MAYWRITE, we must be able to invoke the appropriate
vm_ops->mmap() handler to do so. We would otherwise fail the
mapping_map_writable() check before we had the opportunity to avoid it.
This patch moves this check after the call_mmap() invocation. Only memfd
actively denies write access causing a potential failure here (in
memfd_add_seals()), so there should be no impact on non-memfd cases.
This patch makes the userland-visible change that MAP_SHARED, PROT_READ
mappings of an F_SEAL_WRITE sealed memfd mapping will now succeed.
There is a delicate situation with cleanup paths assuming that a writable
mapping must have occurred in circumstances where it may now not have. In
order to ensure we do not accidentally mark a writable file unwritable by
mistake, we explicitly track whether we have a writable mapping and unmap
only if we do.
[lstoakes@gmail.com: do not set writable_file_mapping in inappropriate case]
Link: https://lkml.kernel.org/r/c9eb4cc6-7db4-4c2b-838d-43a0b319a4f0@lucifer.local
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217238
Link: https://lkml.kernel.org/r/55e413d20678a1bb4c7cce889062bbb07b0df892.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The seal_check_future_write() function is called by shmem_mmap() or
hugetlbfs_file_mmap() to disallow any future writable mappings of an memfd
sealed this way.
The F_SEAL_WRITE flag is not checked here, as that is handled via the
mapping->i_mmap_writable mechanism and so any attempt at a mapping would
fail before this could be run.
However we intend to change this, meaning this check can be performed for
F_SEAL_WRITE mappings also.
The logic here is equally applicable to both flags, so update this
function to accommodate both and rename it accordingly.
Link: https://lkml.kernel.org/r/913628168ce6cce77df7d13a63970bae06a526e0.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "permit write-sealed memfd read-only shared mappings", v4.
The man page for fcntl() describing memfd file seals states the following
about F_SEAL_WRITE:-
Furthermore, trying to create new shared, writable memory-mappings via
mmap(2) will also fail with EPERM.
With emphasis on 'writable'. In turns out in fact that currently the
kernel simply disallows all new shared memory mappings for a memfd with
F_SEAL_WRITE applied, rendering this documentation inaccurate.
This matters because users are therefore unable to obtain a shared mapping
to a memfd after write sealing altogether, which limits their usefulness.
This was reported in the discussion thread [1] originating from a bug
report [2].
This is a product of both using the struct address_space->i_mmap_writable
atomic counter to determine whether writing may be permitted, and the
kernel adjusting this counter when any VM_SHARED mapping is performed and
more generally implicitly assuming VM_SHARED implies writable.
It seems sensible that we should only update this mapping if VM_MAYWRITE
is specified, i.e. whether it is possible that this mapping could at any
point be written to.
If we do so then all we need to do to permit write seals to function as
documented is to clear VM_MAYWRITE when mapping read-only. It turns out
this functionality already exists for F_SEAL_FUTURE_WRITE - we can
therefore simply adapt this logic to do the same for F_SEAL_WRITE.
We then hit a chicken and egg situation in mmap_region() where the check
for VM_MAYWRITE occurs before we are able to clear this flag. To work
around this, perform this check after we invoke call_mmap(), with careful
consideration of error paths.
Thanks to Andy Lutomirski for the suggestion!
[1]:https://lore.kernel.org/all/20230324133646.16101dfa666f253c4715d965@linux-foundation.org/
[2]:https://bugzilla.kernel.org/show_bug.cgi?id=217238
This patch (of 3):
There is a general assumption that VMAs with the VM_SHARED flag set are
writable. If the VM_MAYWRITE flag is not set, then this is simply not the
case.
Update those checks which affect the struct address_space->i_mmap_writable
field to explicitly test for this by introducing
[vma_]is_shared_maywrite() helper functions.
This remains entirely conservative, as the lack of VM_MAYWRITE guarantees
that the VMA cannot be written to.
Link: https://lkml.kernel.org/r/cover.1697116581.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/d978aefefa83ec42d18dfa964ad180dbcde34795.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS assumes all schemes will be applied for at least one DAMON
monitoring results snapshot within one aggregation interval, or makes no
sense to wait for it while DAMON is deactivated by the watermarks. That
for deactivated status still makes sense, but the aggregation interval
based assumption is invalid now because each scheme can has its own apply
interval. For schemes having larger than the aggregation or watermarks
check interval, DAMOS tried regions update request can be finished without
the update. Avoid the case by explicitly checking the status of the
schemes tried regions update and watermarks based DAMON deactivation.
Link: https://lkml.kernel.org/r/20231012192256.33556-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/sysfs-schemes: Do DAMOS tried regions update for
only one apply interval".
DAMOS tried regions update feature of DAMON sysfs interface is doing the
update for one aggregation interval after the request is made. Since the
per-scheme apply interval is supported, that behavior makes no much sense.
That is, the tried regions directory will have regions from multiple
DAMON monitoring results snapshots, or no region for apply intervals that
much shorter than, or longer than the aggregation interval, respectively.
Update the behavior to update the regions for each scheme for only its
apply interval, and update the document.
Since DAMOS apply interval is the aggregation by default, this change
makes no visible behavioral difference to old users who don't explicitly
set the apply intervals.
Patches Sequence
----------------
The first two patches makes schemes of apply intervals that much shorter
or longer than the aggregation interval to keep the maximum and minimum
times for continuing the update. After the two patches, the update aligns
with the each scheme's apply interval.
Finally, the third patch updates the document to reflect the behavior.
This patch (of 3):
DAMON_SYSFS exposes every DAMON-found region that eligible for applying
the scheme action for one aggregation interval. However, each DAMON-based
operation scheme has its own apply interval. Hence, for a scheme that
having its apply interval much smaller than the aggregation interval,
DAMON_SYSFS will expose the scheme regions that applied to more than one
DAMON monitoring results snapshots. Since the purpose of DAMON tried
regions is exposing single snapshot, this makes no much sense. Track
progress of each scheme's tried regions update and avoid the case.
Link: https://lkml.kernel.org/r/20231012192256.33556-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231012192256.33556-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix page_owner's use of free timestamps".
While page ower output is used to investigate memory utilization,
typically the allocation pathway, the introduction of timestamps to the
page owner records caused each record to become unique due to the
granularity of the nanosecond timestamp (for example):
Page allocated via order 0 ... ts 5206196026 ns, free_ts 5187156703 ns
Page allocated via order 0 ... ts 5206198540 ns, free_ts 5187162702 ns
Furthermore, the page_owner output only dumps the currently allocated
records, so having the free timestamps is nonsensical for the typical use
case.
In addition, the introduction of timestamps was not properly handled in
the page_owner_sort tool causing most use cases to be broken. This series
is meant to remove the free timestamps from the page_owner output and fix
the page_owner_sort tool so proper collation can occur.
This patch (of 5):
When printing page_owner data via the sysfs interface, no free pages will
ever be dumped due to the series of checks in read_page_owner():
/*
* Although we do have the info about past allocation of free
* pages, it's not relevant for current memory usage.
*/
if (!test_bit(PAGE_EXT_OWNER_ALLOCATED, &page_ext->flags))
The free_ts values are still used when dump_page_owner() is called, so
keeping the field for other use cases but removing them for the typical
page_owner case.
Link: https://lkml.kernel.org/r/20231013190350.579407-1-audra@redhat.com
Link: https://lkml.kernel.org/r/20231013190350.579407-2-audra@redhat.com
Fixes: 866b485262 ("mm/page_owner: record the timestamp of all pages during free")
Signed-off-by: Audra Mitchell <audra@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mremap uses vma_merge() in the case where a VMA needs to be extended. This
can be significantly simplified and abstracted.
This makes it far easier to understand what the actual function is doing,
avoids future mistakes in use of the confusing vma_merge() function and
importantly allows us to make future changes to how vma_merge() is
implemented by knowing explicitly which merge cases each invocation uses.
Note that in the mremap() extend case, we perform this merge only when
old_len == vma->vm_end - addr. The extension_start, i.e. the start of the
extended portion of the VMA is equal to addr + old_len, i.e. vma->vm_end.
With this refactoring, vma_merge() is no longer required anywhere except
mm/mmap.c, so mark it static.
Link: https://lkml.kernel.org/r/f16cbdc2e72d37a1a097c39dc7d1fee8919a1c93.1697043508.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Only in mmap_region() and copy_vma() do we attempt to merge VMAs which
occupy entirely new regions of virtual memory.
We can abstract this logic and make the intent of this invocations of it
completely explicit, rather than invoking vma_merge() with an inscrutable
wall of parameters.
This also paves the way for a simplification of the core vma_merge()
implementation, as we seek to make it entirely an implementation detail.
The VMA merge call in mmap_region() occurs only for file-backed mappings,
where each of the parameters previously specified as NULL are defaulted to
NULL in vma_init() (called by vm_area_alloc()).
This matches the previous behaviour of specifying NULL for a number of
fields, however note that prior to this call we pass the VMA to the file
system driver via call_mmap(), which may in theory adjust fields that we
pass in to vma_merge_new_vma().
Therefore we actually resolve an oversight here by allowing for the fact
that the driver may have done this.
Link: https://lkml.kernel.org/r/3dc71d17e307756a54781d4a4ce7315cf8b18bea.1697043508.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now the common pattern of - attempting a merge via vma_merge() and should
this fail splitting VMAs via split_vma() - has been abstracted, the former
can be placed into mm/internal.h and the latter made static.
In addition, the split_vma() nommu variant also need not be exported.
Link: https://lkml.kernel.org/r/405f2be10e20c4e9fbcc9fe6b2dfea105f6642e0.1697043508.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mprotect() and other functions which change VMA parameters over a range
each employ a pattern of:-
1. Attempt to merge the range with adjacent VMAs.
2. If this fails, and the range spans a subset of the VMA, split it
accordingly.
This is open-coded and duplicated in each case. Also in each case most of
the parameters passed to vma_merge() remain the same.
Create a new function, vma_modify(), which abstracts this operation,
accepting only those parameters which can be changed.
To avoid the mess of invoking each function call with unnecessary
parameters, create inline wrapper functions for each of the modify
operations, parameterised only by what is required to perform the action.
We can also significantly simplify the logic - by returning the VMA if we
split (or merged VMA if we do not) we no longer need specific handling for
merge/split cases in any of the call sites.
Note that the userfaultfd_release() case works even though it does not
split VMAs - since start is set to vma->vm_start and end is set to
vma->vm_end, the split logic does not trigger.
In addition, since we calculate pgoff to be equal to vma->vm_pgoff + (start
- vma->vm_start) >> PAGE_SHIFT, and start - vma->vm_start will be 0 in this
instance, this invocation will remain unchanged.
We eliminate a VM_WARN_ON() in mprotect_fixup() as this simply asserts that
vma_merge() correctly ensures that flags remain the same, something that is
already checked in is_mergeable_vma() and elsewhere, and in any case is not
specific to mprotect().
Link: https://lkml.kernel.org/r/0dfa9368f37199a423674bf0ee312e8ea0619044.1697043508.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The original problem of the overly long list of waiters on a locked page
was solved properly by commit 9a1ea439b1 ("mm:
put_and_wait_on_page_locked() while page is migrated"). In the meantime,
using bookmarks for the writeback bit can cause livelocks, so we need to
stop using them.
Link: https://lkml.kernel.org/r/20231010035829.544242-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Bin Lai <sclaibin@gmail.com>
Cc: Benjamin Segall <bsegall@google.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When mprotect() is used to make unwritable VMAs writable, they have the
VM_ACCOUNT flag applied and memory accounted accordingly.
If the VMA has had no pages faulted in and is then made unwritable once
again, it will remain accounted for, despite not being capable of
extending memory usage.
Consider:-
ptr = mmap(NULL, page_size * 3, PROT_READ, MAP_ANON | MAP_PRIVATE, -1, 0);
mprotect(ptr + page_size, page_size, PROT_READ | PROT_WRITE);
mprotect(ptr + page_size, page_size, PROT_READ);
The first mprotect() splits the range into 3 VMAs and the second fails to
merge the three as the middle VMA has VM_ACCOUNT set and the others do
not, rendering them unmergeable.
This is unnecessary, since no pages have actually been allocated and the
middle VMA is not capable of utilising more memory, thereby introducing
unnecessary VMA fragmentation (and accounting for more memory than is
necessary).
Since we cannot efficiently determine which pages map to an anonymous VMA,
we have to be very conservative - determining whether any pages at all
have been faulted in, by checking whether vma->anon_vma is NULL.
We can see that the lack of anon_vma implies that no anonymous pages are
present as evidenced by vma_needs_copy() utilising this on fork to
determine whether page tables need to be copied.
The only place where anon_vma is set NULL explicitly is on fork with
VM_WIPEONFORK set, however since this flag is intended to cause the child
process to not CoW on a given memory range, it is right to interpret this
as indicating the VMA has no faulted-in anonymous memory mapped.
If the VMA was forked without VM_WIPEONFORK set, then anon_vma_fork() will
have ensured that a new anon_vma is assigned (and correctly related to its
parent anon_vma) should any pages be CoW-mapped.
The overall operation is safe against races as we hold a write lock against
mm->mmap_lock.
If we could efficiently look up the VMA's faulted-in pages then we would
unaccount all those pages not yet faulted in. However as the original
comment alludes this simply isn't currently possible, so we are
conservative and account all pages or none at all.
Link: https://lkml.kernel.org/r/ad5540371a16623a069f03f4db1739f33cde1fab.1696921767.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This fixes a compiler warning when compiling an allyesconfig with W=1:
mm/internal.h:1235:9: error: function might be a candidate for `gnu_printf'
format attribute [-Werror=suggest-attribute=format]
[akpm@linux-foundation.org: fix shrinker_alloc() as welll per Qi Zheng]
Link: https://lkml.kernel.org/r/822387b7-4895-4e64-5806-0f56b5d6c447@bytedance.com
Link: https://lkml.kernel.org/r/ZSBue-3kM6gI6jCr@mainframe
Fixes: c42d50aefd ("mm: shrinker: add infrastructure for dynamically allocating shrinker")
Signed-off-by: Lucy Mielke <lucymielke@icloud.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The 6.0 commits:
commit 9fec51689f ("mm: thp: kill transparent_hugepage_active()")
commit 7da4e2cb8b ("mm: thp: kill __transhuge_page_enabled()")
merged "can we have THPs in this VMA?" logic that was previously done
separately by fault-path, khugepaged, and smaps "THPeligible" checks.
During the process, the semantics of the fault path check changed in two
ways:
1) A VM_NO_KHUGEPAGED check was introduced (also added to smaps path).
2) We no longer checked if non-anonymous memory had a vm_ops->huge_fault
handler that could satisfy the fault. Previously, this check had been
done in create_huge_pud() and create_huge_pmd() routines, but after
the changes, we never reach those routines.
During the review of the above commits, it was determined that in-tree
users weren't affected by the change; most notably, since the only
relevant user (in terms of THP) of VM_MIXEDMAP or ->huge_fault is DAX,
which is explicitly approved early in approval logic. However, this was a
bad assumption to make as it assumes the only reason to support
->huge_fault was for DAX (which is not true in general).
Remove the VM_NO_KHUGEPAGED check when not in collapse path and give any
->huge_fault handler a chance to handle the fault. Note that we don't
validate the file mode or mapping alignment, which is consistent with the
behavior before the aforementioned commits.
Link: https://lkml.kernel.org/r/20230925200110.1979606-1-zokeefe@google.com
Fixes: 7da4e2cb8b ("mm: thp: kill __transhuge_page_enabled()")
Reported-by: Saurabh Singh Sengar <ssengar@microsoft.com>
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For most migration use cases, only transfer the memcg data from the old
folio to the new folio, and clear the old folio's memcg data. No charging
and uncharging will be done.
This shaves off some work on the migration path, and avoids the temporary
double charging of a folio during its migration.
The only exception is replace_page_cache_folio(), which will use the old
mem_cgroup_migrate() (now renamed to mem_cgroup_replace_folio). In that
context, the isolation of the old page isn't quite as thorough as with
migration, so we cannot use our new implementation directly.
This patch is the result of the following discussion on the new hugetlb
memcg accounting behavior:
https://lore.kernel.org/lkml/20231003171329.GB314430@monkey/
Link: https://lkml.kernel.org/r/20231006184629.155543-3-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "hugetlb memcg accounting", v4.
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etcetera fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch series rectifies this issue by charging the memcg when the
hugetlb folio is allocated, and uncharging when the folio is freed. In
addition, a new selftest is added to demonstrate and verify this new
behavior.
This patch (of 4):
This patch exposes charge committing and cancelling as parts of the memory
controller interface. These functionalities are useful when the
try_charge() and commit_charge() stages have to be separated by other
actions in between (which can fail). One such example is the new hugetlb
accounting behavior in the following patch.
The patch also adds a helper function to obtain a reference to the
current task's memcg.
Link: https://lkml.kernel.org/r/20231006184629.155543-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231006184629.155543-2-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Originally, hugetlb_cgroup was the only hugetlb user of tail page
structure fields. So, the code defined and checked against
HUGETLB_CGROUP_MIN_ORDER to make sure pages weren't too small to use.
However, by now, tail page #2 is used to store hugetlb hwpoison and
subpool information as well. In other words, without that tail page
hugetlb doesn't work.
Acknowledge this fact by getting rid of HUGETLB_CGROUP_MIN_ORDER and
checks against it. Instead, just check for the minimum viable page order
at hstate creation time.
Link: https://lkml.kernel.org/r/20231004153248.3842997-1-fvdl@google.com
Signed-off-by: Frank van der Linden <fvdl@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Match how folio_unlock() works by combining the test for PG_waiters with
the clearing of PG_writeback. This should have a small performance win,
and removes the last user of folio_wake().
Link: https://lkml.kernel.org/r/20231004165317.1061855-18-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rather than check the result of test-and-clear, just check that we have
the writeback bit set at the start. This wouldn't catch every case, but
it's good enough (and enables the next patch).
Link: https://lkml.kernel.org/r/20231004165317.1061855-17-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Optimise folio_end_read() by setting the uptodate bit at the same time we
clear the unlock bit. This saves at least one memory barrier and one
write-after-write hazard.
Link: https://lkml.kernel.org/r/20231004165317.1061855-16-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Architectures which don't define their own use the one in
asm-generic/bitops/lock.h. Get rid of all the ifdefs around "maybe we
don't have it".
Link: https://lkml.kernel.org/r/20231004165317.1061855-15-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace clear_bit_and_unlock_is_negative_byte() with
xor_unlock_is_negative_byte(). We have a few places that like to lock a
folio, set a flag and unlock it again. Allow for the possibility of
combining the latter two operations for efficiency. We are guaranteed
that the caller holds the lock, so it is safe to unlock it with the xor.
The caller must guarantee that nobody else will set the flag without
holding the lock; it is not safe to do this with the PG_dirty flag, for
example.
Link: https://lkml.kernel.org/r/20231004165317.1061855-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Provide a function for filesystems to call when they have finished reading
an entire folio.
Link: https://lkml.kernel.org/r/20231004165317.1061855-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some architectures have implemented optimized copy_page for full page
copying, such as arm.
On my arm platform, use the copy_page helper for single page copying is
about 10 percent faster than memcpy.
Link: https://lkml.kernel.org/r/20231006060245.7411-1-mark-pk.tsai@mediatek.com
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
filemap_get_folios() is filemap_get_folios_tag() with XA_PRESENT as the
tag that is being matched. Return filemap_get_folios_tag() with
XA_PRESENT as the tag instead of duplicating the code in
filemap_get_folios().
No functional changes.
Link: https://lkml.kernel.org/r/20231006110120.136809-1-kernel@pankajraghav.com
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The next_page is only used to forward page in case target is in second
half range. Move forward page directly to remove unnecessary next_page.
Link: https://lkml.kernel.org/r/20230927103514.98281-3-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Two minor cleanups to break_down_buddy_pages", v2.
Two minor cleanups to break_down_buddy_pages.
This patch (of 2):
1. We always have target in range started with next_page and full free
range started with current_buddy.
2. The last split range size is 1 << low and low should be >= 0, then
size >= 1. So page + size != page is always true (because size > 0).
As summary, current_page will not equal to target page.
Link: https://lkml.kernel.org/r/20230927103514.98281-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20230927103514.98281-2-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When tracing through the code in vma_merge(), it was not completely
clear why the error return to a dup_anon_vma() call would not overwrite
a previous attempt to the same function. This commit adds a comment
specifying why it is safe.
Link: https://lkml.kernel.org/r/20230929183041.2835469-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/linux-mm/CAG48ez3iDwFPR=Ed1BfrNuyUJPMK_=StjxhUsCkL6po1s7bONg@mail.gmail.com/
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KASAN code is supposed to use the unchecked __memset implementation when
accessing its metadata.
Change uses of memset to __memset in mm/kasan/.
Link: https://lkml.kernel.org/r/6f621966c6f52241b5aaa7220c348be90c075371.1696605143.git.andreyknvl@google.com
Fixes: 59e6e098d1 ("kasan: introduce kasan_complete_mode_report_info")
Fixes: 3c5c3cfb9e ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
get_user_pages_remote() will never return 0 except in the case of
FOLL_NOWAIT being specified, which we explicitly disallow.
This simplifies error handling for the caller and avoids the awkwardness
of dealing with both errors and failing to pin. Failing to pin here is an
error.
Link: https://lkml.kernel.org/r/00319ce292d27b3aae76a0eb220ce3f528187508.1696288092.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There really should be no circumstances under which a non-FOLL_NOWAIT GUP
operation fails to return any pages, so make this an error and warn on it.
To catch the trivial case, simply exit early if nr_pages == 0.
This brings __get_user_pages_locked() in line with the behaviour of its
nommu variant.
Link: https://lkml.kernel.org/r/2a42d96dd1e37163f90a0019a541163dafb7e4c3.1696288092.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rather than open-coding a list of internal GUP flags in
is_valid_gup_args(), define which ones are internal.
In addition, explicitly check to see if the user passed in FOLL_TOUCH
somehow, as this appears to have been accidentally excluded.
Link: https://lkml.kernel.org/r/971e013dfe20915612ea8b704e801d7aef9a66b6.1696288092.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "various improvements to the GUP interface", v2.
A series of fixes to simplify and improve the GUP interface with an eye to
providing groundwork to future improvements:-
* __access_remote_vm() and access_remote_vm() are functionally identical,
so make the former static such that in future we can potentially change
the external-facing implementation details of this function.
* Extend is_valid_gup_args() to cover the missing FOLL_TOUCH case, and
simplify things by defining INTERNAL_GUP_FLAGS to check against.
* Adjust __get_user_pages_locked() to explicitly treat a failure to pin any
pages as an error in all circumstances other than FOLL_NOWAIT being
specified, bringing it in line with the nommu implementation of this
function.
* (With many thanks to Arnd who suggested this in the first instance)
Update get_user_page_vma_remote() to explicitly only return a page or an
error, simplifying the interface and avoiding the questionable
IS_ERR_OR_NULL() pattern.
This patch (of 4):
access_remote_vm() passes through parameters to __access_remote_vm()
directly, so remove the __access_remote_vm() function from mm.h and use
access_remote_vm() in the one caller that needs it (ptrace_access_vm()).
This allows future adjustments to the GUP-internal __access_remote_vm()
function while keeping the access_remote_vm() function stable.
Link: https://lkml.kernel.org/r/cover.1696288092.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/f7877c5039ce1c202a514a8aeeefc5cdd5e32d19.1696288092.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This function does not actively use the mm_struct, it can be removed.
Link: https://lkml.kernel.org/r/20231003144857.752952-2-gregory.price@memverge.com
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's clean up do_wp_page() a bit, removing two labels and making it a
easier to read.
wp_can_reuse_anon_folio() now only operates on the whole folio. Move the
SetPageAnonExclusive() out into do_wp_page(). No need to do this under
page lock -- the page table lock is sufficient.
Link: https://lkml.kernel.org/r/20231002142949.235104-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()".
Convert page_move_anon_rmap() to folio_move_anon_rmap(), letting the
callers handle PageAnonExclusive. I'm including cleanup patch #3 because
it fits into the picture and can be done cleaner by the conversion.
This patch (of 3):
Let's move it into the caller: there is a difference between whether an
anon folio can only be mapped by one process (e.g., into one VMA), and
whether it is truly exclusive (e.g., no references -- including GUP --
from other processes).
Further, for large folios the page might not actually be pointing at the
head page of the folio, so it better be handled in the caller. This is a
preparation for converting page_move_anon_rmap() to consume a folio.
Link: https://lkml.kernel.org/r/20231002142949.235104-1-david@redhat.com
Link: https://lkml.kernel.org/r/20231002142949.235104-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I think this is a pretty rare occurrence, but for consistency handle
faults with the VMA lock held the same way that we handle other faults
with the VMA lock held.
Link: https://lkml.kernel.org/r/20231006195318.4087158-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Most file-backed faults are already handled through ->map_pages(), but if
we need to do I/O we'll come this way. Since filemap_fault() is now safe
to be called under the VMA lock, we can handle these faults under the VMA
lock now.
Link: https://lkml.kernel.org/r/20231006195318.4087158-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the page is not currently present in the page tables, we need to call
the page fault handler to find out which page we're supposed to COW, so we
need to both check that there is already an anon_vma and that the fault
handler doesn't need the mmap_lock.
Link: https://lkml.kernel.org/r/20231006195318.4087158-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are many implementations of ->fault and some of them depend on
mmap_lock being held. All vm_ops that implement ->map_pages() end up
calling filemap_fault(), which I have audited to be sure it does not rely
on mmap_lock. So (for now) key off ->map_pages existing as a flag to
indicate that it's safe to call ->fault while only holding the vma lock.
Link: https://lkml.kernel.org/r/20231006195318.4087158-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is usually safe to call wp_page_copy() under the VMA lock. The only
unsafe situation is when no anon_vma has been allocated for this VMA, and
we have to look at adjacent VMAs to determine if their anon_vma can be
shared. Since this happens only for the first COW of a page in this VMA,
the majority of calls to wp_page_copy() do not need to fall back to the
mmap_sem.
Add vmf_anon_prepare() as an alternative to anon_vma_prepare() which will
return RETRY if we currently hold the VMA lock and need to allocate an
anon_vma. This lets us drop the check in do_wp_page().
Link: https://lkml.kernel.org/r/20231006195318.4087158-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Handle more faults under the VMA lock", v2.
At this point, we're handling the majority of file-backed page faults
under the VMA lock, using the ->map_pages entry point. This patch set
attempts to expand that for the following siutations:
- We have to do a read. This could be because we've hit the point in
the readahead window where we need to kick off the next readahead,
or because the page is simply not present in cache.
- We're handling a write fault. Most applications don't do I/O by writes
to shared mmaps for very good reasons, but some do, and it'd be nice
to not make that slow unnecessarily.
- We're doing a COW of a private mapping (both PTE already present
and PTE not-present). These are two different codepaths and I handle
both of them in this patch set.
There is no support in this patch set for drivers to mark themselves as
being VMA lock friendly; they could implement the ->map_pages
vm_operation, but if they do, they would be the first. This is probably
something we want to change at some point in the future, and I've marked
where to make that change in the code.
There is very little performance change in the benchmarks we've run;
mostly because the vast majority of page faults are handled through the
other paths. I still think this patch series is useful for workloads that
may take these paths more often, and just for cleaning up the fault path
in general (it's now clearer why we have to retry in these cases).
This patch (of 6):
Drop the VMA lock instead of the mmap_lock if that's the one which
is held.
Link: https://lkml.kernel.org/r/20231006195318.4087158-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231006195318.4087158-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Percpu counter's compare and add are separate functions: without locking
around them (which would defeat their purpose), it has been possible to
overflow the intended limit. Imagine all the other CPUs fallocating tmpfs
huge pages to the limit, in between this CPU's compare and its add.
I have not seen reports of that happening; but tmpfs's recent addition of
dquot_alloc_block_nodirty() in between the compare and the add makes it
even more likely, and I'd be uncomfortable to leave it unfixed.
Introduce percpu_counter_limited_add(fbc, limit, amount) to prevent it.
I believe this implementation is correct, and slightly more efficient than
the combination of compare and add (taking the lock once rather than twice
when nearing full - the last 128MiB of a tmpfs volume on a machine with
128 CPUs and 4KiB pages); but it does beg for a better design - when
nearing full, there is no new batching, but the costly percpu counter sum
across CPUs still has to be done, while locked.
Follow __percpu_counter_sum()'s example, including cpu_dying_mask as well
as cpu_online_mask: but shouldn't __percpu_counter_compare() and
__percpu_counter_limited_add() then be adding a num_dying_cpus() to
num_online_cpus(), when they calculate the maximum which could be held
across CPUs? But the times when it matters would be vanishingly rare.
Link: https://lkml.kernel.org/r/bb817848-2d19-bcc8-39ca-ea179af0f0b4@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There has been a recurring problem, that when a tmpfs volume is being
filled by racing threads, some fail with ENOSPC (or consequent SIGBUS or
EFAULT) even though all allocations were within the permitted size.
This was a problem since early days, but magnified and complicated by the
addition of huge pages. We have often worked around it by adding some
slop to the tmpfs size, but it's hard to say how much is needed, and some
users prefer not to do that e.g. keeping sparse files in a tightly
tailored tmpfs helps to prevent accidental writing to holes.
This comes from the allocation sequence:
1. check page cache for existing folio
2. check and reserve from vm_enough_memory
3. check and account from size of tmpfs
4. if huge, check page cache for overlapping folio
5. allocate physical folio, huge or small
6. check and charge from mem cgroup limit
7. add to page cache (but maybe another folio already got in).
Concurrent tasks allocating at the same position could deplete the size
allowance and fail. Doing vm_enough_memory and size checks before the
folio allocation was intentional (to limit the load on the page allocator
from this source) and still has some virtue; but memory cgroup never did
that, so I think it's better reordered to favour predictable behaviour.
1. check page cache for existing folio
2. if huge, check page cache for overlapping folio
3. allocate physical folio, huge or small
4. check and charge from mem cgroup limit
5. add to page cache (but maybe another folio already got in)
6. check and reserve from vm_enough_memory
7. check and account from size of tmpfs.
The folio lock held from allocation onwards ensures that the !uptodate
folio cannot be used by others, and can safely be deleted from the cache
if checks 6 or 7 subsequently fail (and those waiting on folio lock
already check that the folio was not truncated once they get the lock);
and the early addition to page cache ensures that racers find it before
they try to duplicate the accounting.
Seize the opportunity to tidy up shmem_get_folio_gfp()'s ENOSPC retrying,
which can be combined inside the new shmem_alloc_and_add_folio(): doing 2
splits twice (once huge, once nonhuge) is not exactly equivalent to trying
5 splits (and giving up early on huge), but let's keep it simple unless
more complication proves necessary.
Userfaultfd is a foreign country: they do things differently there, and
for good reason - to avoid mmap_lock deadlock. Leave ordering in
shmem_mfill_atomic_pte() untouched for now, but I would rather like to
mesh it better with shmem_get_folio_gfp() in the future.
Link: https://lkml.kernel.org/r/22ddd06-d919-33b-1219-56335c1bf28e@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extract shmem's memcg charging out of shmem_add_to_page_cache(): it's
misleading done there, because many calls are dealing with a swapcache
page, whose memcg is nowadays always remembered while swapped out, then
the charge re-levied when it's brought back into swapcache.
Temporarily move it back up to the shmem_get_folio_gfp() level, where the
memcg was charged before v5.8; but the next commit goes on to move it back
down to a new home.
In making this change, it becomes clear that shmem_swapin_folio() does not
need to know the vma, just the fault mm (if any): call it fault_mm rather
than charge_mm - let mem_cgroup_charge() decide whom to charge.
Link: https://lkml.kernel.org/r/4b2143c5-bf32-64f0-841-81a81158dac@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By historical accident, shmem_acct_block() and shmem_inode_acct_block()
were never pluralized when the pages argument was added, despite their
complements being shmem_unacct_blocks() and shmem_inode_unacct_blocks()
all along. It has been an irritation: fix their naming at last.
Link: https://lkml.kernel.org/r/9124094-e4ab-8be7-ef80-9a87bdc2e4fc@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mostly removing a few superfluous blank lines, joining short arglines,
imposing some 80-column observance, correcting a couple of comments. None
of it more interesting than deleting a repeated INIT_LIST_HEAD().
Link: https://lkml.kernel.org/r/b3983d28-5d3f-8649-36af-b819285d7a9e@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
That Trinity livelock shmem_falloc avoidance block is unlikely, and a
distraction from the proper business of shmem_fault(): separate it out.
(This used to help compilers save stack on the fault path too, but both
gcc and clang nowadays seem to make better choices anyway.)
Link: https://lkml.kernel.org/r/6fe379a4-6176-9225-9263-fe60d2633c0@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The vma is already there in vmf->vma, so no need for a separate arg.
Link: https://lkml.kernel.org/r/d9ce6f65-a2ed-48f4-4299-fdb0544875c5@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The existing comments in filemap_fault() suggest that, after either a
minor fault has occurred and filemap_get_folio() found a folio in the page
cache, or a major fault arose and __filemap_get_folio(FGP_CREATE...) did
the job (having relied on do_sync_mmap_readahead() or filemap_read_folio()
to read in the folio), the only possible reason it could not be uptodate
is because of an error.
This is not so, as if, for instance, the fault occurred within a VMA which
had the VM_RAND_READ flag set (via madvise() with the MADV_RANDOM flag
specified), this would cause even synchronous readahead to fail to read in
the folio.
I confirmed this by dropping page caches and faulting in memory
madvise()'d this way, observing that this code path was reached on each
occasion.
Clarify the comments to include this case, and additionally update the
comment recently added around the invalidate lock logic to make it clear
the comment explicitly refers to the minor fault case.
In addition, while we're here, refer to folios rather than pages.
[lstoakes@gmail.com: correct identation as per Christopher's feedback]
Link: https://lkml.kernel.org/r/2c7014c0-6343-4e76-8697-3f84f54350bd@lucifer.local
Link: https://lkml.kernel.org/r/20230930231029.88196-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The PAGEMAP_SCAN IOCTL on the pagemap file can be used to get or optionally
clear the info about page table entries. The following operations are
supported in this IOCTL:
- Scan the address range and get the memory ranges matching the provided
criteria. This is performed when the output buffer is specified.
- Write-protect the pages. The PM_SCAN_WP_MATCHING is used to write-protect
the pages of interest. The PM_SCAN_CHECK_WPASYNC aborts the operation if
non-Async Write Protected pages are found. The ``PM_SCAN_WP_MATCHING``
can be used with or without PM_SCAN_CHECK_WPASYNC.
- Both of those operations can be combined into one atomic operation where
we can get and write protect the pages as well.
Following flags about pages are currently supported:
- PAGE_IS_WPALLOWED - Page has async-write-protection enabled
- PAGE_IS_WRITTEN - Page has been written to from the time it was write protected
- PAGE_IS_FILE - Page is file backed
- PAGE_IS_PRESENT - Page is present in the memory
- PAGE_IS_SWAPPED - Page is in swapped
- PAGE_IS_PFNZERO - Page has zero PFN
- PAGE_IS_HUGE - Page is THP or Hugetlb backed
This IOCTL can be extended to get information about more PTE bits. The
entire address range passed by user [start, end) is scanned until either
the user provided buffer is full or max_pages have been found.
[akpm@linux-foundation.org: update it for "mm: hugetlb: add huge page size param to set_huge_pte_at()"]
[akpm@linux-foundation.org: fix CONFIG_HUGETLB_PAGE=n warning]
[arnd@arndb.de: hide unused pagemap_scan_backout_range() function]
Link: https://lkml.kernel.org/r/20230927060257.2975412-1-arnd@kernel.org
[sfr@canb.auug.org.au: fix "fs/proc/task_mmu: hide unused pagemap_scan_backout_range() function"]
Link: https://lkml.kernel.org/r/20230928092223.0625c6bf@canb.auug.org.au
Link: https://lkml.kernel.org/r/20230821141518.870589-3-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Implement IOCTL to get and optionally clear info about
PTEs", v33.
*Motivation*
The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows
GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch()
retrieves the addresses of the pages that are written to in a region of
virtual memory.
This syscall is used in Windows applications and games etc. This syscall
is being emulated in pretty slow manner in userspace. Our purpose is to
enhance the kernel such that we translate it efficiently in a better way.
Currently some out of tree hack patches are being used to efficiently
emulate it in some kernels. We intend to replace those with these
patches. So the whole gaming on Linux can effectively get benefit from
this. It means there would be tons of users of this code.
CRIU use case [2] was mentioned by Andrei and Danylo:
> Use cases for migrating sparse VMAs are binaries sanitized with ASAN,
> MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of
> shadow memory [4]. Being able to migrate such binaries allows to highly
> reduce the amount of work needed to identify and fix post-migration
> crashes, which happen constantly.
Andrei defines the following uses of this code:
* it is more granular and allows us to track changed pages more
effectively. The current interface can clear dirty bits for the entire
process only. In addition, reading info about pages is a separate
operation. It means we must freeze the process to read information
about all its pages, reset dirty bits, only then we can start dumping
pages. The information about pages becomes more and more outdated,
while we are processing pages. The new interface solves both these
downsides. First, it allows us to read pte bits and clear the
soft-dirty bit atomically. It means that CRIU will not need to freeze
processes to pre-dump their memory. Second, it clears soft-dirty bits
for a specified region of memory. It means CRIU will have actual info
about pages to the moment of dumping them.
* The new interface has to be much faster because basic page filtering
is happening in the kernel. With the old interface, we have to read
pagemap for each page.
*Implementation Evolution (Short Summary)*
From the definition of GetWriteWatch(), we feel like kernel's soft-dirty
feature can be used under the hood with some additions like:
* reset soft-dirty flag for only a specific region of memory instead of
clearing the flag for the entire process
* get and clear soft-dirty flag for a specific region atomically
So we decided to use ioctl on pagemap file to read or/and reset soft-dirty
flag. But using soft-dirty flag, sometimes we get extra pages which weren't
even written. They had become soft-dirty because of VMA merging and
VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were
able to by-pass this short coming by ignoring VM_SOFTDIRTY until David
reported that mprotect etc messes up the soft-dirty flag while ignoring
VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We
discussed if we can revert these patches. But we could not reach to any
conclusion. So at this point, I made couple of tries to solve this whole
VM_SOFTDIRTY issue by correcting the soft-dirty implementation:
* [7] Correct the bug fixed wrongly back in 2014. It had potential to cause
regression. We left it behind.
* [8] Keep a list of soft-dirty part of a VMA across splits and merges. I
got the reply don't increase the size of the VMA by 8 bytes.
At this point, we left soft-dirty considering it is too much delicate and
userfaultfd [9] seemed like the only way forward. From there onward, we
have been basing soft-dirty emulation on userfaultfd wp feature where
kernel resolves the faults itself when WP_ASYNC feature is used. It was
straight forward to add WP_ASYNC feature in userfautlfd. Now we get only
those pages dirty or written-to which are really written in reality. (PS
There is another WP_UNPOPULATED userfautfd feature is required which is
needed to avoid pre-faulting memory before write-protecting [9].)
All the different masks were added on the request of CRIU devs to create
interface more generic and better.
[1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch
[2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com
[3] https://github.com/google/sanitizers
[4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit
[5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com
[6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/
[7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com
[8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com
[9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com
[10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com
This patch (of 6):
Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows
userfaultfd wr-protect faults to be resolved by the kernel directly.
It can be used like a high accuracy version of soft-dirty, without vma
modifications during tracking, and also with ranged support by default
rather than for a whole mm when reset the protections due to existence of
ioctl(UFFDIO_WRITEPROTECT).
Several goals of such a dirty tracking interface:
1. All types of memory should be supported and tracable. This is nature
for soft-dirty but should mention when the context is userfaultfd,
because it used to only support anon/shmem/hugetlb. The problem is for
a dirty tracking purpose these three types may not be enough, and it's
legal to track anything e.g. any page cache writes from mmap.
2. Protections can be applied to partial of a memory range, without vma
split/merge fuss. The hope is that the tracking itself should not
affect any vma layout change. It also helps when reset happens because
the reset will not need mmap write lock which can block the tracee.
3. Accuracy needs to be maintained. This means we need pte markers to work
on any type of VMA.
One could question that, the whole concept of async dirty tracking is not
really close to fundamentally what userfaultfd used to be: it's not "a
fault to be serviced by userspace" anymore. However, using userfaultfd-wp
here as a framework is convenient for us in at least:
1. VM_UFFD_WP vma flag, which has a very good name to suite something like
this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new
feature bit to identify from a sync version of uffd-wp registration.
2. PTE markers logic can be leveraged across the whole kernel to maintain
the uffd-wp bit as long as an arch supports, this also applies to this
case where uffd-wp bit will be a hint to dirty information and it will
not go lost easily (e.g. when some page cache ptes got zapped).
3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or
resetting a range of memory, while there's no counterpart in the old
soft-dirty world, hence if this is wanted in a new design we'll need a
new interface otherwise.
We can somehow understand that commonality because uffd-wp was
fundamentally a similar idea of write-protecting pages just like
soft-dirty.
This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so
far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also
gives us chance to modify impl of WP_ASYNC just in case it could be not
depending on WP_UNPOPULATED anymore in the future kernels. It's also fine
to imply that because both features will rely on PTE_MARKER_UFFD_WP config
option, so they'll show up together (or both missing) in an UFFDIO_API
probe.
vma_can_userfault() now allows any VMA if the userfaultfd registration is
only about async uffd-wp. So we can track dirty for all kinds of memory
including generic file systems (like XFS, EXT4 or BTRFS).
One trick worth mention in do_wp_page() is that we need to manually update
vmf->orig_pte here because it can be used later with a pte_same() check -
this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags.
The major defect of this approach of dirty tracking is we need to populate
the pgtables when tracking starts. Soft-dirty doesn't do it like that.
It's unwanted in the case where the range of memory to track is huge and
unpopulated (e.g., tracking updates on a 10G file with mmap() on top,
without having any page cache installed yet). One way to improve this is
to allow pte markers exist for larger than PTE level for PMD+. That will
not change the interface if to implemented, so we can leave that for
later.
Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
memcg_rstat_updated() uses the value of the state update to keep track of
the magnitude of pending updates, so that we only do a stats flush when
it's worth the work. Most values passed into memcg_rstat_updated() are in
pages, however, a few of them are actually in bytes or KBs.
To put this into perspective, a 512 byte slab allocation today would look
the same as allocating 512 pages. This may result in premature flushes,
which means unnecessary work and latency.
Normalize all the state values passed into memcg_rstat_updated() to pages.
Round up non-zero sub-page to 1 page, because memcg_rstat_updated()
ignores 0 page updates.
Link: https://lkml.kernel.org/r/20230922175741.635002-3-yosryahmed@google.com
Fixes: 5b3be698a8 ("memcg: better bounds on the memcg stats updates")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: memcg: fix tracking of pending stats updates values", v2.
While working on adjacent code [1], I realized that the values passed into
memcg_rstat_updated() to keep track of the magnitude of pending updates is
consistent. It is mostly in pages, but sometimes it can be in bytes or
KBs. Fix that.
Patch 1 reworks memcg_page_state_unit() so that we can reuse it in patch 2
to check and normalize the units of state updates.
[1]https://lore.kernel.org/lkml/20230921081057.3440885-1-yosryahmed@google.com/
This patch (of 2):
memcg_page_state_unit() is currently used to identify the unit of a memcg
state item so that all stats in memory.stat are in bytes. However, it
lies about the units of WORKINGSET_* stats. These stats actually
represent pages, but we present them to userspace as a scalar number of
events. In retrospect, maybe those stats should have been memcg "events"
rather than memcg "state".
In preparation for using memcg_page_state_unit() for other purposes that
need to know the truthful units of different stat items, break it down
into two helpers:
- memcg_page_state_unit() retuns the actual unit of the item.
- memcg_page_state_output_unit() returns the unit used for output.
Use the latter instead of the former in memcg_page_state_output() and
lruvec_page_state_output(). While we are at it, let's show cgroup v1 some
love and add memcg_page_state_local_output() for consistency.
No functional change intended.
Link: https://lkml.kernel.org/r/20230922175741.635002-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230922175741.635002-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In commit d8f5f7e445 ("hugetlb: set hugetlb page flag before
optimizing vmemmap") checks were added to print a warning if
hugetlb_vmemmap_restore was called on a non-hugetlb page.
This was mostly due to ordering issues in the hugetlb page set up and tear
down sequencees. One place missed was the routine
dissolve_free_huge_page.
Naoya Horiguchi noted: "I saw that VM_WARN_ON_ONCE() in
hugetlb_vmemmap_restore is triggered when memory_failure() is called on a
free hugetlb page with vmemmap optimization disabled (the warning is not
triggered if vmemmap optimization is enabled). I think that we need check
folio_test_hugetlb() before dissolve_free_huge_page() calls
hugetlb_vmemmap_restore_folio()."
Perform the check as suggested by Naoya.
Link: https://lkml.kernel.org/r/20231017032140.GA3680@monkey
Fixes: d8f5f7e445 ("hugetlb: set hugetlb page flag before optimizing vmemmap")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Tested-by: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <song.bao.hua@hisilicon.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS can receive DAMOS tried regions update request while kdamond
is already out of the main loop and before_terminate callback
(damon_sysfs_before_terminate() in this case) is not yet called. And
damon_sysfs_handle_cmd() can further be finished before the callback is
invoked. Then, damon_sysfs_before_terminate() unlocks damon_sysfs_lock,
which is not locked by anyone. This happens because the callback function
assumes damon_sysfs_cmd_request_callback() should be called before it.
Check if the assumption was true before doing the unlock, to avoid this
problem.
Link: https://lkml.kernel.org/r/20231007200432.3110-1-sj@kernel.org
Fixes: f1d13cacab ("mm/damon/sysfs: implement DAMOS tried regions update command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.2.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On arm64, building with CONFIG_KASAN_HW_TAGS now causes a compile-time
error:
mm/kasan/report.c: In function 'kasan_non_canonical_hook':
mm/kasan/report.c:637:20: error: 'KASAN_SHADOW_OFFSET' undeclared (first use in this function)
637 | if (addr < KASAN_SHADOW_OFFSET)
| ^~~~~~~~~~~~~~~~~~~
mm/kasan/report.c:637:20: note: each undeclared identifier is reported only once for each function it appears in
mm/kasan/report.c:640:77: error: expected expression before ';' token
640 | orig_addr = (addr - KASAN_SHADOW_OFFSET) << KASAN_SHADOW_SCALE_SHIFT;
This was caused by removing the dependency on CONFIG_KASAN_INLINE that
used to prevent this from happening. Use the more specific dependency
on KASAN_SW_TAGS || KASAN_GENERIC to only ignore the function for hwasan
mode.
Link: https://lkml.kernel.org/r/20231016200925.984439-1-arnd@kernel.org
Fixes: 12ec6a919b0f ("kasan: print the original fault addr when access invalid shadow")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Haibo Li <haibo.li@mediatek.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
when the checked address is illegal,the corresponding shadow address from
kasan_mem_to_shadow may have no mapping in mmu table. Access such shadow
address causes kernel oops. Here is a sample about oops on arm64(VA
39bit) with KASAN_SW_TAGS and KASAN_OUTLINE on:
[ffffffb80aaaaaaa] pgd=000000005d3ce003, p4d=000000005d3ce003,
pud=000000005d3ce003, pmd=0000000000000000
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 3 PID: 100 Comm: sh Not tainted 6.6.0-rc1-dirty #43
Hardware name: linux,dummy-virt (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __hwasan_load8_noabort+0x5c/0x90
lr : do_ib_ob+0xf4/0x110
ffffffb80aaaaaaa is the shadow address for efffff80aaaaaaaa.
The problem is reading invalid shadow in kasan_check_range.
The generic kasan also has similar oops.
It only reports the shadow address which causes oops but not
the original address.
Commit 2f004eea0fc8("x86/kasan: Print original address on #GP")
introduce to kasan_non_canonical_hook but limit it to KASAN_INLINE.
This patch extends it to KASAN_OUTLINE mode.
Link: https://lkml.kernel.org/r/20231009073748.159228-1-haibo.li@mediatek.com
Fixes: 2f004eea0fc8("x86/kasan: Print original address on #GP")
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Haibo Li <haibo.li@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.
This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.
Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault. However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.
Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:
CPU 1 CPU 2
MADV_DONTNEED
unmap page
shoot down TLB entry
page fault
fail to allocate a huge page
killed with SIGBUS
free page
Fix that race by pulling the locking from __unmap_hugepage_final_range
into helper functions called from zap_page_range_single. This ensures
page faults stay locked out of the MADV_DONTNEED VMA until the huge pages
have actually been freed.
Link: https://lkml.kernel.org/r/20231006040020.3677377-4-riel@surriel.com
Fixes: 04ada095dc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend the locking scheme used to protect shared hugetlb mappings from
truncate vs page fault races, in order to protect private hugetlb mappings
(with resv_map) against MADV_DONTNEED.
Add a read-write semaphore to the resv_map data structure, and use that
from the hugetlb_vma_(un)lock_* functions, in preparation for closing the
race between MADV_DONTNEED and page faults.
Link: https://lkml.kernel.org/r/20231006040020.3677377-3-riel@surriel.com
Fixes: 04ada095dc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "hugetlbfs: close race between MADV_DONTNEED and page fault", v7.
Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.
This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.
Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault. However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.
Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:
CPU 1 CPU 2
MADV_DONTNEED
unmap page
shoot down TLB entry
page fault
fail to allocate a huge page
killed with SIGBUS
free page
Fix that race by extending the hugetlb_vma_lock locking scheme to also
cover private hugetlb mappings (with resv_map), and pulling the locking
from __unmap_hugepage_final_range into helper functions called from
zap_page_range_single. This ensures page faults stay locked out of the
MADV_DONTNEED VMA until the huge pages have actually been freed.
This patch (of 3):
Hugetlbfs leaves a dangling pointer in the VMA if mmap fails. This has
not been a problem so far, but other code in this patch series tries to
follow that pointer.
Link: https://lkml.kernel.org/r/20231006040020.3677377-1-riel@surriel.com
Link: https://lkml.kernel.org/r/20231006040020.3677377-2-riel@surriel.com
Fixes: 04ada095dc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a zswap store fails due to the limit, it acquires a pool reference
and queues the shrinker. When the shrinker runs, it drops the reference.
However, there can be multiple store attempts before the shrinker wakes up
and runs once. This results in reference leaks and eventual saturation
warnings for the pool refcount.
Fix this by dropping the reference again when the shrinker is already
queued. This ensures one reference per shrinker run.
Link: https://lkml.kernel.org/r/20231006160024.170748-1-hannes@cmpxchg.org
Fixes: 45190f01dd ("mm/zswap.c: add allocation hysteresis if pool limit is hit")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Chris Mason <clm@fb.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: <stable@vger.kernel.org> [5.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This change adds the "pages skipped" metric. To be able to evaluate how
successful smart page scanning is, the pages skipped metric can be
compared to the pages scanned metric.
The pages skipped metric is a cumulative counter. The counter is stored
under /sys/kernel/mm/ksm/pages_skipped.
Link: https://lkml.kernel.org/r/20230926040939.516161-3-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Smart scanning mode for KSM", v3.
This patch series adds "smart scanning" for KSM.
What is smart scanning?
=======================
KSM evaluates all the candidate pages for each scan. It does not use historic
information from previous scans. This has the effect that candidate pages that
couldn't be used for KSM de-duplication continue to be evaluated for each scan.
The idea of "smart scanning" is to keep historic information. With the historic
information we can temporarily skip the candidate page for one or several scans.
Details:
========
"Smart scanning" is to keep two small counters to store if the page has been
used for KSM. One counter stores how often we already tried to use the page for
KSM and the other counter stores how often we skip a page.
How often we skip the candidate page depends how often a page failed KSM
de-duplication. The code skips a maximum of 8 times. During testing this has
shown to be a good compromise for different workloads.
New sysfs knob:
===============
Smart scanning is not enabled by default. With /sys/kernel/mm/ksm/smart_scan
smart scanning can be enabled.
Monitoring:
===========
To monitor how effective smart scanning is a new sysfs knob has been introduced.
/sys/kernel/mm/pages_skipped report how many pages have been skipped by smart
scanning.
Results:
========
- Various workloads have shown a 20% - 25% reduction in page scans
For the instagram workload for instance, the number of pages scanned has been
reduced from over 20M pages per scan to less than 15M pages.
- Less pages scans also resulted in an overall higher de-duplication rate as
some shorter lived pages could be de-duplicated additionally
- Less pages scanned allows to reduce the pages_to_scan parameter
and this resulted in a 25% reduction in terms of CPU.
- The improvements have been observed for workloads that enable KSM with
madvise as well as prctl
This patch (of 4):
This change adds a "smart" page scanning mode for KSM. So far all the
candidate pages are continuously scanned to find candidates for
de-duplication. There are a considerably number of pages that cannot be
de-duplicated. This is costly in terms of CPU. By using smart scanning
considerable CPU savings can be achieved.
This change takes the history of scanning pages into account and skips the
page scanning of certain pages for a while if de-deduplication for this
page has not been successful in the past.
To do this it introduces two new fields in the ksm_rmap_item structure:
age and remaining_skips. age, is the KSM age and remaining_skips
determines how often scanning of this page is skipped. The age field is
incremented each time the page is scanned and the page cannot be de-
duplicated. age updated is capped at U8_MAX.
How often a page is skipped is dependent how often de-duplication has been
tried so far and the number of skips is currently limited to 8. This
value has shown to be effective with different workloads.
The feature is currently disable by default and can be enabled with the
new smart_scan knob.
The feature has shown to be very effective: upt to 25% of the page scans
can be eliminated; the pages_to_scan rate can be reduced by 40 - 50% and a
similar de-duplication rate can be maintained.
[akpm@linux-foundation.org: make ksm_smart_scan default true, for testing]
Link: https://lkml.kernel.org/r/20230926040939.516161-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20230926040939.516161-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, a fixed abstract distance MEMTIER_DEFAULT_DAX_ADISTANCE is
used for slow memory type in kmem driver. This limits the usage of kmem
driver, for example, it cannot be used for HBM (high bandwidth memory).
So, we use the general abstract distance calculation mechanism in kmem
drivers to get more accurate abstract distance on systems with proper
support. The original MEMTIER_DEFAULT_DAX_ADISTANCE is used as fallback
only.
Now, multiple memory types may be managed by kmem. These memory types are
put into the "kmem_memory_types" list and protected by
kmem_memory_type_lock.
Link: https://lkml.kernel.org/r/20230926060628.265989-5-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Bharata B Rao <bharata@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A memory tiering abstract distance calculation algorithm based on ACPI
HMAT is implemented. The basic idea is as follows.
The performance attributes of system default DRAM nodes are recorded as
the base line. Whose abstract distance is MEMTIER_ADISTANCE_DRAM. Then,
the ratio of the abstract distance of a memory node (target) to
MEMTIER_ADISTANCE_DRAM is scaled based on the ratio of the performance
attributes of the node to that of the default DRAM nodes.
The functions to record the read/write latency/bandwidth of the default
DRAM nodes and calculate abstract distance according to read/write
latency/bandwidth ratio will be used by CXL CDAT (Coherent Device
Attribute Table) and other memory device drivers. So, they are put in
memory-tiers.c.
Link: https://lkml.kernel.org/r/20230926060628.265989-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Bharata B Rao <bharata@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memory tiering: calculate abstract distance based on ACPI
HMAT", v4.
We have the explicit memory tiers framework to manage systems with
multiple types of memory, e.g., DRAM in DIMM slots and CXL memory devices.
Where, same kind of memory devices will be grouped into memory types,
then put into memory tiers. To describe the performance of a memory type,
abstract distance is defined. Which is in direct proportion to the memory
latency and inversely proportional to the memory bandwidth. To keep the
code as simple as possible, fixed abstract distance is used in dax/kmem to
describe slow memory such as Optane DCPMM.
To support more memory types, in this series, we added the abstract
distance calculation algorithm management mechanism, provided a algorithm
implementation based on ACPI HMAT, and used the general abstract distance
calculation interface in dax/kmem driver. So, dax/kmem can support HBM
(high bandwidth memory) in addition to the original Optane DCPMM.
This patch (of 4):
The abstract distance may be calculated by various drivers, such as ACPI
HMAT, CXL CDAT, etc. While it may be used by various code which hot-add
memory node, such as dax/kmem etc. To decouple the algorithm users and
the providers, the abstract distance calculation algorithms management
mechanism is implemented in this patch. It provides interface for the
providers to register the implementation, and interface for the users.
Multiple algorithm implementations can cooperate via calculating abstract
distance for different memory nodes. The preference of algorithm
implementations can be specified via priority (notifier_block.priority).
Link: https://lkml.kernel.org/r/20230926060628.265989-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230926060628.265989-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Bharata B Rao <bharata@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
No functional difference, folio_ref_freeze() is currently a wrapper for
page_ref_freeze().
Link: https://lkml.kernel.org/r/20230926174433.81241-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove special cased hugetlb handling code within the page cache by
changing the granularity of ->index to the base page size rather than the
huge page size. The motivation of this patch is to reduce complexity
within the filemap code while also increasing performance by removing
branches that are evaluated on every page cache lookup.
To support the change in index, new wrappers for hugetlb page cache
interactions are added. These wrappers perform the conversion to a linear
index which is now expected by the page cache for huge pages.
========================= PERFORMANCE ======================================
Perf was used to check the performance differences after the patch.
Overall the performance is similar to mainline with a very small larger
overhead that occurs in __filemap_add_folio() and
hugetlb_add_to_page_cache(). This is because of the larger overhead that
occurs in xa_load() and xa_store() as the xarray is now using more entries
to store hugetlb folios in the page cache.
Timing
aarch64
2MB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt
real 1m49.568s
user 0m0.000s
sys 1m49.461s
6.5-rc3:
[root]# time fallocate -l 700GB test.txt
real 1m47.495s
user 0m0.000s
sys 1m47.370s
1GB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt
real 1m47.024s
user 0m0.000s
sys 1m46.921s
6.5-rc3:
[root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt
real 1m44.551s
user 0m0.000s
sys 1m44.438s
x86
2MB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt
real 0m22.383s
user 0m0.000s
sys 0m22.255s
6.5-rc3:
[opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt
real 0m22.735s
user 0m0.038s
sys 0m22.567s
1GB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt
real 0m25.786s
user 0m0.001s
sys 0m25.589s
6.5-rc3:
[root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt
real 0m33.454s
user 0m0.001s
sys 0m33.193s
aarch64:
workload - fallocate a 700GB file backed by huge pages
6.5-rc3 + this patch:
2MB Page Size:
--100.00%--__arm64_sys_fallocate
ksys_fallocate
vfs_fallocate
hugetlbfs_fallocate
|
|--95.04%--__pi_clear_page
|
|--3.57%--clear_huge_page
| |
| |--2.63%--rcu_all_qs
| |
| --0.91%--__cond_resched
|
--0.67%--__cond_resched
0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache
0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio
6.5-rc3
2MB Page Size:
--100.00%--__arm64_sys_fallocate
ksys_fallocate
vfs_fallocate
hugetlbfs_fallocate
|
|--94.91%--__pi_clear_page
|
|--4.11%--clear_huge_page
| |
| |--3.00%--rcu_all_qs
| |
| --1.10%--__cond_resched
|
--0.59%--__cond_resched
0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache
0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio
x86
workload - fallocate a 100GB file backed by huge pages
6.5-rc3 + this patch:
2MB Page Size:
hugetlbfs_fallocate
|
--99.57%--clear_huge_page
|
--98.47%--clear_page_erms
|
--0.53%--asm_sysvec_apic_timer_interrupt
0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load
0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache
0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio
0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store
6.5-rc3
2MB Page Size:
--99.93%--__x64_sys_fallocate
vfs_fallocate
hugetlbfs_fallocate
|
--99.38%--clear_huge_page
|
|--98.40%--clear_page_erms
|
--0.59%--__cond_resched
0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio
========================= TESTING ======================================
This patch passes libhugetlbfs tests and LTP hugetlb tests
********** TEST SUMMARY
* 2M
* 32-bit 64-bit
* Total testcases: 110 113
* Skipped: 0 0
* PASS: 107 113
* FAIL: 0 0
* Killed by signal: 3 0
* Bad configuration: 0 0
* Expected FAIL: 0 0
* Unexpected PASS: 0 0
* Test not present: 0 0
* Strange test result: 0 0
**********
Done executing testcases.
LTP Version: 20220527-178-g2761a81c4
page migration was also tested using Mike Kravetz's test program.[8]
[dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug]
Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain
Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
si_meminfo() will read and assign more info not just free/ram pages. For
just DAMOS_WMARK_FREE_MEM_RATE use, only get free and ram pages is ok to
save cpu.
Link: https://lkml.kernel.org/r/20230920015727.4482-1-link@vivo.com
Signed-off-by: Huan Yang <link@vivo.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The cpupid (or access time) is stored in the head page for THP, so it is
safely to make should_numa_migrate_memory() and numa_hint_fault_latency()
to take a folio. This is in preparation for large folio numa balancing.
Link: https://lkml.kernel.org/r/20230921074417.24004-7-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for large folio numa balancing, make mpol_misplaced() to
take a folio, no functional change intended.
Link: https://lkml.kernel.org/r/20230921074417.24004-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for large folio numa balancing, make numa_migrate_prep() to
take a folio, no functional change intended.
Link: https://lkml.kernel.org/r/20230921074417.24004-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Numa balancing only try to migrate non-compound page in do_numa_page(),
use a folio in it to save several compound_head calls, note we use
folio_estimated_sharers(), it is enough to check the folio sharers since
only normal page is handled, if large folio numa balancing is supported, a
precise folio sharers check would be used, no functional change intended.
Link: https://lkml.kernel.org/r/20230921074417.24004-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use a folio in do_huge_pmd_numa_page(), reduce three page_folio() calls to
one, no functional change intended.
Link: https://lkml.kernel.org/r/20230921074417.24004-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: convert numa balancing functions to use a folio", v2.
do_numa_pages() only handles non-compound pages, and only PMD-mapped THPs
are handled in do_huge_pmd_numa_page(). But a large, PTE-mapped folio
will be supported so let's convert more numa balancing functions to
use/take a folio in preparation for that, no functional change intended
for now.
This patch (of 6):
The new vm_normal_folio_pmd() wrapper is similar to vm_normal_folio(),
which allow them to completely replace the struct page variables with
struct folio variables.
Link: https://lkml.kernel.org/r/20230921074417.24004-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20230921074417.24004-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit b035f5a6d8 ("mm: slab: reduce the kmalloc() minimum alignment
if DMA bouncing possible") allows architectures with non-coherent DMA to
define a small ARCH_KMALLOC_MINALIGN (e.g. sizeof(unsigned long long))
and this has been enabled on arm64. With KASAN_HW_TAGS enabled, however,
ARCH_SLAB_MINALIGN becomes 16 on arm64 (arch_slab_minalign() dynamically
selects it since commit d949a8155d ("mm: make minimum slab alignment a
runtime property")). This can lead to a situation where kmalloc-8 caches
are attempted to be created with a kmem_caches.size aligned to 16. When
the cache is mergeable, it can lead to kernel warnings like:
sysfs: cannot create duplicate filename '/kernel/slab/:d-0000016'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc1-00001-gda98843cd306-dirty #5
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x90/0xe8
show_stack+0x18/0x24
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x24
sysfs_warn_dup+0x64/0x80
sysfs_create_dir_ns+0xe8/0x108
kobject_add_internal+0x98/0x264
kobject_init_and_add+0x8c/0xd8
sysfs_slab_add+0x12c/0x248
slab_sysfs_init+0x98/0x14c
do_one_initcall+0x6c/0x1b0
kernel_init_freeable+0x1c0/0x288
kernel_init+0x24/0x1e0
ret_from_fork+0x10/0x20
kobject: kobject_add_internal failed for :d-0000016 with -EEXIST, don't try to register things with the same name in the same directory.
SLUB: Unable to add boot slab dma-kmalloc-8 to sysfs
Limit the __kmalloc_minalign() return value (used to create the
kmalloc-* caches) to arch_slab_minalign() so that kmalloc-8 caches are
skipped when KASAN_HW_TAGS is enabled (both config and runtime).
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: b035f5a6d8 ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
This makes it harder for accidental or malicious changes to
shmem_xattr_handlers at runtime.
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20230930050033.41174-29-wedsonaf@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Simplify code pattern of 'folio->index + folio_nr_pages(folio)' by using
the existing helper folio_next_index() in filemap_map_pages().
Link: https://lkml.kernel.org/r/20230921081535.3398-1-duminjie@vivo.com
Signed-off-by: Minjie Du <duminjie@vivo.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current memory reclaim delay statistics only count the direct memory
reclaim of the task in do_try_to_free_pages(). In systems with NUMA open,
some tasks occasionally experience slower response times, but the total
count of reclaim does not increase, using ftrace can show that
node_reclaim has occurred.
The memory reclaim occurring in get_page_from_freelist() is also due to
heavy memory load. To get the impact of tasks in memory reclaim, this
patch adds the statistics of the memory reclaim delay statistics for
__node_reclaim().
Link: https://lkml.kernel.org/r/181C946095F0252B+7cc60eca-1abf-4502-aad3-ffd8ef89d910@ex.bilibili.com
Signed-off-by: Wen Yu Li <wenyuli@ex.bilibili.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: <wangyun@bilibili.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit b25806dcd3d5("mm: memcontrol: deprecate swapaccounting=0
mode") do_memsw_account() is synonymous with
!cgroup_subsys_on_dfl(memory_cgrp_subsys), It always equals true in
memcg1_stat_format(). Remove the unused code.
Link: https://lkml.kernel.org/r/20230915105845.3199656-3-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Tejun heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Expose swapcache stat for memcg v1", v2.
Since commit b603894248 ("mm: memcg: add swapcache stat for memcg v2")
adds swapcache stat for the cgroup v2, it seems there is no reason to hide
it in memcg v1. Conversely, with swapcached it is more accurate to
evaluate the available memory for memcg.
Link: https://lkml.kernel.org/r/20230915105845.3199656-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20230915105845.3199656-2-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
First found this typo as reviewing memory tier code. Fix it by sed like:
$ sed -i 's/sibiling/sibling/g' $(git grep -l sibiling)
so the acpi one will be corrected as well.
Link: https://lkml.kernel.org/r/20230802092856.819328-1-lizhijian@cn.fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
do_pages_move does not handle compat pointers for the page list.
correctly. Add in_compat_syscall check and appropriate get_user fetch
when iterating the page list.
It makes the syscall in compat mode (32-bit userspace, 64-bit kernel)
work the same way as the native 32-bit syscall again, restoring the
behavior before my broken commit 5b1b561ba7 ("mm: simplify
compat_sys_move_pages").
More specifically, my patch moved the parsing of the 'pages' array from
the main entry point into do_pages_stat(), which left the syscall
working correctly for the 'stat' operation (nodes = NULL), while the
'move' operation (nodes != NULL) is now missing the conversion and
interprets 'pages' as an array of 64-bit pointers instead of the
intended 32-bit userspace pointers.
It is possible that nobody noticed this bug because the few
applications that actually call move_pages are unlikely to run in
compat mode because of their large memory requirements, but this
clearly fixes a user-visible regression and should have been caught by
ltp.
Link: https://lkml.kernel.org/r/20231003144857.752952-1-gregory.price@memverge.com
Fixes: 5b1b561ba7 ("mm: simplify compat_sys_move_pages")
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the calling function fails after the dup_anon_vma(), the
duplication of the anon_vma is not being undone. Add the necessary
unlink_anon_vma() call to the error paths that are missing them.
This issue showed up during inspection of the error path in vma_merge()
for an unrelated vma iterator issue.
Users may experience increased memory usage, which may be problematic as
the failure would likely be caused by a low memory situation.
Link: https://lkml.kernel.org/r/20230929183041.2835469-3-Liam.Howlett@oracle.com
Fixes: d4af56c5c7 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Calling vm_brk_flags() with flags set other than VM_EXEC will exit the
function without releasing the mmap_write_lock.
Just do the sanity check before the lock is acquired. This doesn't fix an
actual issue since no caller sets a flag other than VM_EXEC.
Link: https://lkml.kernel.org/r/20230929171937.work.697-kees@kernel.org
Fixes: 2e7ce7d354 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When guard page debug is enabled and set_page_guard returns success, we
miss to forward page to point to start of next split range and we will do
split unexpectedly in page range without target page. Move start page
update before set_page_guard to fix this.
As we split to wrong target page, then splited pages are not able to merge
back to original order when target page is put back and splited pages
except target page is not usable. To be specific:
Consider target page is the third page in buddy page with order 2.
| buddy-2 | Page | Target | Page |
After break down to target page, we will only set first page to Guard
because of bug.
| Guard | Page | Target | Page |
When we try put_page_back_buddy with target page, the buddy page of target
if neither guard nor buddy, Then it's not able to construct original page
with order 2
| Guard | Page | buddy-0 | Page |
All pages except target page is not in free list and is not usable.
Link: https://lkml.kernel.org/r/20230927094401.68205-1-shikemeng@huaweicloud.com
Fixes: 06be6ff3d2 ("mm,hwpoison: rework soft offline for free pages")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a kthread_stop_put() helper that stops a thread and puts its task
struct. Use it to replace the various instances of kthread_stop()
followed by put_task_struct().
Remove the kthread_stop_put() macro in usbip that is similar but doesn't
return the result of kthread_stop().
[agruenba@redhat.com: fix kerneldoc comment]
Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com
[akpm@linux-foundation.org: document kthread_stop_put()'s argument]
Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current kernel only lock base size folio during mlock syscall.
Add large folio support with following rules:
- Only mlock large folio when it's in VM_LOCKED VMA range
and fully mapped to page table.
fully mapped folio is required as if folio is not fully
mapped to a VM_LOCKED VMA, if system is in memory pressure,
page reclaim is allowed to pick up this folio, split it
and reclaim the pages which are not in VM_LOCKED VMA.
- munlock will apply to the large folio which is in VMA range
or cross the VMA boundary.
This is required to handle the case that the large folio is
mlocked, later the VMA is split in the middle of large folio.
Link: https://lkml.kernel.org/r/20230918073318.1181104-4-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If large folio is in the range of VM_LOCKED VMA, it should be mlocked to
avoid being picked by page reclaim. Which may split the large folio and
then mlock each pages again.
Mlock this kind of large folio to prevent them being picked by page
reclaim.
For the large folio which cross the boundary of VM_LOCKED VMA or not fully
mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is
under memory pressure, this kind of large folio will be split and the
pages ouf of VM_LOCKED VMA can be reclaimed.
Ideally, for large folio, we should mlock it when the large folio is fully
mapped to VMA and munlock it if any page are unmampped from VMA. But it's
not easy to detect whether the large folio is fully mapped to VMA in some
cases (like add/remove rmap). So we update mlock_vma_folio() and
munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags.
Let caller to decide whether they should call these two functions.
For add rmap, only mlock normal 4K folio and postpone large folio handling
to page reclaim phase. It is possible to reuse page table iterator to
detect whether folio is fully mapped or not during page reclaim phase.
For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly
because rmap makes folio not fully mapped to VMA.
Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "support large folio for mlock", v3.
Yu mentioned at [1] about the mlock() can't be applied to large folio.
I leant the related code and here is my understanding:
- For RLIMIT_MEMLOCK related, there is no problem. Because the
RLIMIT_MEMLOCK statistics is not related underneath page. That means
underneath page mlock or munlock doesn't impact the RLIMIT_MEMLOCK
statistics collection which is always correct.
- For keeping the page in RAM, there is no problem either. At least,
during try_to_unmap_one(), once detect the VMA has VM_LOCKED bit set in
vm_flags, the folio will be kept whatever the folio is mlocked or not.
So the function of mlock for large folio works. But it's not optimized
because the page reclaim needs scan these large folio and may split them.
This series identified the large folio for mlock to four types:
- The large folio is in VM_LOCKED range and fully mapped to the
range
- The large folio is in the VM_LOCKED range but not fully mapped to
the range
- The large folio cross VM_LOCKED VMA boundary
- The large folio cross last level page table boundary
For the first type, we mlock large folio so page reclaim will skip it.
For the second/third type, we don't mlock large folio. As the pages not
mapped to VM_LOACKED range are mapped to none VM_LOCKED range, if system
is in memory pressure situation, the large folio can be picked by page
reclaim and split. Then the pages not mapped to VM_LOCKED range can be
reclaimed.
For the fourth type, we don't mlock large folio because locking one page
table lock can't prevent the part in another last level page table being
unmapped. Thanks to Ryan for pointing this out.
To check whether the folio is fully mapped to the range, PTEs needs be
checked to see whether the page of folio is associated. Which needs take
page table lock and is heavy operation. So far, the only place needs this
check is madvise and page reclaim. These functions already have their own
PTE iterator.
patch1 introduce API to check whether large folio is in VMA range.
patch2 make page reclaim/mlock_vma_folio/munlock_vma_folio support
large folio mlock/munlock.
patch3 make mlock/munlock syscall support large folio.
Yu also mentioned a race which can make folio unevictable after munlock
during RFC v2 discussion [3]:
We decided that race issue didn't block this series based on:
- That race issue was not introduced by this series
- We had a looks-ok fix for that race issue. Need to wait
for mlock_count fixing patch as Yosry Ahmed suggested [4]
[1] https://lore.kernel.org/linux-mm/CAOUHufbtNPkdktjt_5qM45GegVO-rCFOMkSh0HQminQ12zsV8Q@mail.gmail.com/
[2] https://lore.kernel.org/linux-mm/20230809061105.3369958-1-fengwei.yin@intel.com/
[3] https://lore.kernel.org/linux-mm/CAOUHufZ6=9P_=CAOQyw0xw-3q707q-1FVV09dBNDC-hpcpj2Pg@mail.gmail.com/
This patch (of 3):
folio_in_range() will be used to check whether the folio is mapped to
specific VMA and whether the mapping address of folio is in the range.
Also a helper function folio_within_vma() to check whether folio
is in the range of vma based on folio_in_range().
Link: https://lkml.kernel.org/r/20230918073318.1181104-1-fengwei.yin@intel.com
Link: https://lkml.kernel.org/r/20230918073318.1181104-2-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change to use new address space operation dirty_folio().
Link: https://lkml.kernel.org/r/20230917-trycontrib1-v1-1-db22630b8839@gmail.com
Fixes: 6f31a5a261 ("fs: Add aops->dirty_folio")
Signed-off-by: Jianguo Bau <roidinev@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update DAMON sysfs interface to support DAMOS apply intervals by adding a
new file, 'apply_interval_us' in each scheme directory. Users can set and
get the interval for each scheme in microseconds by writing to and reading
from the file.
Link: https://lkml.kernel.org/r/20230916020945.47296-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON-based operation schemes are applied for every aggregation interval.
That was mainly because schemes were using nr_accesses, which be complete
to be used for every aggregation interval. However, the schemes are now
using nr_accesses_bp, which is updated for each sampling interval in a way
that reasonable to be used. Therefore, there is no reason to apply
schemes for each aggregation interval.
The unnecessary alignment with aggregation interval was also making some
use cases of DAMOS tricky. Quotas setting under long aggregation interval
is one such example. Suppose the aggregation interval is ten seconds, and
there is a scheme having CPU quota 100ms per 1s. The scheme will actually
uses 100ms per ten seconds, since it cannobe be applied before next
aggregation interval. The feature is working as intended, but the results
might not that intuitive for some users. This could be fixed by updating
the quota to 1s per 10s. But, in the case, the CPU usage of DAMOS could
look like spikes, and would actually make a bad effect to other
CPU-sensitive workloads.
Implement a dedicated timing interval for each DAMON-based operation
scheme, namely apply_interval. The interval will be sampling interval
aligned, and each scheme will be applied for its apply_interval. The
interval is set to 0 by default, and it means the scheme should use the
aggregation interval instead. This avoids old users getting any
behavioral difference.
Link: https://lkml.kernel.org/r/20230916020945.47296-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface exposes access rate of each region via DAMOS tried
regions directory. For this, the nr_accesses field of the region is used.
DAMOS was actually using nr_accesses in the past, but it uses
nr_accesses_bp now. Use the value that it is really using as the source.
Note that this doesn't expose nr_accesses_bp as is (in basis point), but
after converting it to the natural number by dividing the value by 10,000.
Hence there is no behavioral change from users' perspective.
Link: https://lkml.kernel.org/r/20230916020945.47296-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: implement DAMOS apply intervals".
DAMON-based operation schemes are applied for every aggregation interval.
That is mainly because schemes are using nr_accesses, which be complete to
be used for every aggregation interval.
This makes some DAMOS use cases be tricky. Quota setting under long
aggregation interval is one such example. Suppose the aggregation
interval is ten seconds, and there is a scheme having CPU quota 100ms per
1s. The scheme will actually uses 100ms per ten seconds, since it cannobe
be applied before next aggregation interval. The feature is working as
intended, but the results might not that intuitive for some users. This
could be fixed by updating the quota to 1s per 10s. But, in the case, the
CPU usage of DAMOS could look like spikes, and actually make a bad effect
to other CPU-sensitive workloads.
Also, with such huge aggregation interval, users may want schemes to be
applied more frequently.
DAMON provides nr_accesses_bp, which is updated for each sampling interval
in a way that reasonable to be used. By using that instead of
nr_accesses, DAMOS can have its own time interval and mitigate abovely
mentioned issues.
This patchset makes DAMOS schemes to use nr_accesses_bp instead of
nr_accesses, and have their own timing intervals. Also update DAMOS tried
regions sysfs files and DAMOS before_apply tracepoint to use the new data
as their source. Note that the interval is zero by default, and it is
interpreted to use the aggregation interval instead. This avoids making
user-visible behavioral changes.
Patches Seuqeunce
-----------------
The first patch (patch 1/9) makes DAMOS uses nr_accesses_bp instead of
nr_accesses, and following two patches (patches 2/9 and 3/9) updates DAMON
sysfs interface for DAMOS tried regions and the DAMOS before_apply
tracespoint to use nr_accesses_bp instead of nr_accesses, respectively.
The following two patches (patches 4/9 and 5/9) implements the
scheme-specific apply interval for DAMON kernel API users and update the
design document for the new feature.
Finally, the following four patches (patches 6/9, 7/9, 8/9 and 9/9) add
support of the feature in DAMON sysfs interface, add a simple selftest
test case, and document the new file on the usage and the ABI documents,
repsectively.
This patch (of 9):
DAMON provides nr_accesses_bp, which becomes same to nr_accesses * 10000
for every aggregation interval, but updated every sampling interval with a
reasonable accuracy. Since DAMON-based operation schemes are applied in
every aggregation interval using nr_accesses, using nr_accesses_bp instead
will make no difference to users. Meanwhile, it allows DAMOS to apply the
schemes in a time interval that less than the aggregation interval. It
could be useful and more flexible for some cases. Do it.
Link: https://lkml.kernel.org/r/20230916020945.47296-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230916020945.47296-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the callers to expect a folio and remove the unnecesary conversion
back to a struct page.
Link: https://lkml.kernel.org/r/20230824141325.2704553-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Anything found on a linked list threaded through ->lru is guaranteed to be
a folio as the compound_head found in a tail page overlaps the ->lru
member of struct page. So we can pull folios directly off these lists no
matter whether pages or folios were added to the list.
Link: https://lkml.kernel.org/r/20230824141325.2704553-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Small hugetlb cleanups", v2.
Some trivial folio conversions
This patch (of 3):
update_and_free_hugetlb_folio puts the memory on hpage_freelist as a folio
so we can take it off the list as a folio.
Link: https://lkml.kernel.org/r/20230824141325.2704553-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230824141325.2704553-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The new boot flow when it comes to initialization of gigantic pages is as
follows:
- At boot time, for a gigantic page during __alloc_bootmem_hugepage, the
region after the first struct page is marked as noinit.
- This results in only the first struct page to be initialized in
reserve_bootmem_region. As the tail struct pages are not initialized at
this point, there can be a significant saving in boot time if HVO
succeeds later on.
- Later on in the boot, the head page is prepped and the first
HUGETLB_VMEMMAP_RESERVE_SIZE / sizeof(struct page) - 1 tail struct pages
are initialized.
- HVO is attempted. If it is not successful, then the rest of the tail
struct pages are initialized. If it is successful, no more tail struct
pages need to be initialized saving significant boot time.
The WARN_ON for increased ref count in gather_bootmem_prealloc was changed
to a VM_BUG_ON. This is OK as there should be no speculative references
this early in boot process. The VM_BUG_ON's are there just in case such
code is introduced.
[akpm@linux-foundation.org: make it nicer for 80 cols]
Link: https://lkml.kernel.org/r/20230913105401.519709-5-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For reserved memory regions marked with this flag, reserve_bootmem_region
is not called during memmap_init_reserved_pages. This can be used to
avoid struct page initialization for regions which won't need them, for
e.g. hugepages with Hugepage Vmemmap Optimization enabled.
Link: https://lkml.kernel.org/r/20230913105401.519709-4-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This allows setting flags to both memblock types and is in preparation for
setting flags (for e.g. to not initialize struct pages) on reserved
memory region.
[usama.arif@bytedance.com: add missing argument definition]
Link: https://lkml.kernel.org/r/20230918090657.220463-1-usama.arif@bytedance.com
Link: https://lkml.kernel.org/r/20230913105401.519709-3-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: hugetlb: Skip initialization of gigantic tail struct
pages if freed by HVO", v5.
This series moves the boot time initialization of tail struct pages of a
gigantic page to later on in the boot. Only the
HUGETLB_VMEMMAP_RESERVE_SIZE / sizeof(struct page) - 1 tail struct pages
are initialized at the start. If HVO is successful, then no more tail
struct pages need to be initialized. For a 1G hugepage, this series avoid
initialization of 262144 - 63 = 262081 struct pages per hugepage.
When tested on a 512G system (allocating 500 1G hugepages), the kexec-boot
times with DEFERRED_STRUCT_PAGE_INIT enabled are:
- with patches, HVO enabled: 1.32 seconds
- with patches, HVO disabled: 2.15 seconds
- without patches, HVO enabled: 3.90 seconds
- without patches, HVO disabled: 3.58 seconds
This represents an approximately 70% reduction in boot time and will
significantly reduce server downtime when using a large number of gigantic
pages.
This patch (of 4):
If tail page prep and initialization is skipped, then the "start" page
will not contain the correct nid. Use the nid from first vmemap page.
Link: https://lkml.kernel.org/r/20230913105401.519709-1-usama.arif@bytedance.com
Link: https://lkml.kernel.org/r/20230913105401.519709-2-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function is used by only mm/damon/core.c. Mark it as a static
function.
Link: https://lkml.kernel.org/r/20230915025251.72816-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_merge_regions_of(), which is called for each aggregation interval,
updates nr_accesses_bp to nr_accesses * 10000. However, nr_accesses_bp is
updated for each sampling interval via damon_moving_sum() using the
aggregation interval as the moving time window. And by the definition of
the algorithm, the value becomes same to discrete-window based sum for
each time window-aligned time. Hence, nr_accesses_bp will be same to
nr_accesses * 10000 for each aggregation interval without explicit update.
Remove the unnecessary update of nr_accesses_bp in
damon_merge_regions_of().
Link: https://lkml.kernel.org/r/20230915025251.72816-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let nr_accesses_bp be calculated as a pseudo-moving sum that updated for
every sampling interval, using damon_moving_sum(). This is assumed to be
useful for cases that the aggregation interval is set quite huge, but the
monivoting results need to be collected earlier than next aggregation
interval is passed.
Link: https://lkml.kernel.org/r/20230915025251.72816-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add yet another representation of the access rate of each region, namely
nr_accesses_bp. It is just same to the nr_accesses but represents the
value in basis point (1 in 10,000), and updated at once in every
aggregation interval. That is, moving_accesses_bp is just nr_accesses *
10000. This may seems useless at the moment. However, it will be useful
for representing less than one nr_accesses value that will be needed to
make moving sum-based nr_accesses.
Link: https://lkml.kernel.org/r/20230915025251.72816-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a simple unit test for the pseudo moving-sum function
(damon_moving_sum()).
Link: https://lkml.kernel.org/r/20230915025251.72816-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For values that continuously change, moving average or sum are good ways
to provide fast updates while handling temporal and errorneous variability
of the value. For example, the access rate counter (nr_accesses) is
calculated as a sum of the number of positive sampled access check results
that collected during a discrete time window (aggregation interval), and
hence it handles temporal and errorneous access check results, but
provides the update only for every aggregation interval. Using a moving
sum method for that could allow providing the value for every sampling
interval. That could be useful for getting monitoring results snapshot or
running DAMOS in fine-grained timing.
However, supporting the moving sum for cases that number of samples in the
time window is arbirary could impose high overhead, since the number of
past values that it needs to keep could be too high. The nr_accesses
would also be one of the cases. To mitigate the overhead, implement a
pseudo-moving sum function that only provides an estimated pseudo-moving
sum. It assumes there was no error in last discrete time window and
subtract constant portion of last discrete time window sum.
Note that the function is not strictly implementing the moving sum, but it
keeps a property of moving sum, which makes the value same to the
dsicrete-window based sum for each time window-aligned timing. Hence,
people collecting the value in the old timings would show no difference.
Link: https://lkml.kernel.org/r/20230915025251.72816-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When getting mm_struct of the monitoring target process fails, there wil
be no need to increase the access rate counter (nr_accesses) of the
regions for the process. Hence, damon_va_check_accesses() skips calling
damon_update_region_access_rate() in the case. This breaks the assumption
that damon_update_region_access_rate() is called for every region, for
every sampling interval. Call the function for every region even in the
case. This might increase the overhead in some cases, but such case would
not be frequent, so no significant impact is really expected.
Link: https://lkml.kernel.org/r/20230915025251.72816-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: provide pseudo-moving sum based access rate".
DAMON checks the access to each region for every sampling interval,
increase the access rate counter of the region, namely nr_accesses, if the
access was made. For every aggregation interval, the counter is reset.
The counter is exposed to users to be used as a metric showing the
relative access rate (frequency) of each region. In other words, DAMON
provides access rate of each region in every aggregation interval. The
aggregation avoids temporal access pattern changes making things
confusing. However, this also makes a few DAMON-related operations to
unnecessarily need to be aligned to the aggregation interval. This can
restrict the flexibility of DAMON applications, especially when the
aggregation interval is huge.
To provide the monitoring results in finer-grained timing while keeping
handling of temporal access pattern change, this patchset implements a
pseudo-moving sum based access rate metric. It is pseudo-moving sum
because strict moving sum implementation would need to keep all values for
last time window, and that could incur high overhead of there could be
arbitrary number of values in a time window. Especially in case of the
nr_accesses, since the sampling interval and aggregation interval can
arbitrarily set and the past values should be maintained for every region,
it could be risky. The pseudo-moving sum assumes there were no temporal
access pattern change in last discrete time window to remove the needs for
keeping the list of the last time window values. As a result, it beocmes
not strict moving sum implementation, but provides a reasonable accuracy.
Also, it keeps an important property of the moving sum. That is, the
moving sum becomes same to discrete-window based sum at the time that
aligns to the time window. This means using the pseudo moving sum based
nr_accesses makes no change to users who shows the value for every
aggregation interval.
Patches Sequence
----------------
The sequence of the patches is as follows. The first four patches are for
preparation of the change. The first two (patches 1 and 2) implements a
helper function for nr_accesses update and eliminate corner case that
skips use of the function, respectively. Following two (patches 3 and 4)
respectively implement the pseudo-moving sum function and its simple unit
test case.
Two patches for making DAMON to use the pseudo-moving sum follow. The
fifthe one (patch 5) introduces a new field for representing the
pseudo-moving sum-based access rate of each region, and the sixth one
makes the new representation to actually updated with the pseudo-moving
sum function.
Last two patches (patches 7 and 8) makes followup fixes for skipping
unnecessary updates and marking the moving sum function as static,
respectively.
This patch (of 8):
Each DAMON operarions set is updating nr_accesses field of each
damon_region for each of their access check results, from the
check_accesses() callback. Directly accessing the field could make things
complex to manage and change in future. Define and use a dedicated
function for the purpose.
Link: https://lkml.kernel.org/r/20230915025251.72816-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230915025251.72816-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sleeps for sampling interval after each sampling, and check if the
aggregation interval and the ops update interval have passed using
ktime_get_coarse_ts64() and baseline timestamps for the intervals. That
design is for making the operations occur at deterministic timing
regardless of the time that spend for each work. However, it turned out
it is not that useful, and incur not-that-intuitive results.
After all, timer functions, and especially sleep functions that DAMON uses
to wait for specific timing, are not necessarily strictly accurate. It is
legal design, so no problem. However, depending on such inaccuracies, the
nr_accesses can be larger than aggregation interval divided by sampling
interval. For example, with the default setting (5 ms sampling interval
and 100 ms aggregation interval) we frequently show regions having
nr_accesses larger than 20. Also, if the execution of a DAMOS scheme
takes a long time, next aggregation could happen before enough number of
samples are collected. This is not what usual users would intuitively
expect.
Since access check sampling is the smallest unit work of DAMON, using the
number of passed sampling intervals as the DAMON-internal timer can easily
avoid these problems. That is, convert aggregation and ops update
intervals to numbers of sampling intervals that need to be passed before
those operations be executed, count the number of passed sampling
intervals, and invoke the operations as soon as the specific amount of
sampling intervals passed. Make the change.
Note that this could make a behavioral change to settings that using
intervals that not aligned by the sampling interval. For example, if the
sampling interval is 5 ms and the aggregation interval is 12 ms, DAMON
effectively uses 15 ms as its aggregation interval, because it checks
whether the aggregation interval after sleeping the sampling interval.
This change will make DAMON to effectively use 10 ms as aggregation
interval, since it uses 'aggregation interval / sampling interval *
sampling interval' as the effective aggregation interval, and we don't use
floating point types. Usual users would have used aligned intervals, so
this behavioral change is not expected to make any meaningful impact, so
just make this change.
Link: https://lkml.kernel.org/r/20230914021523.60649-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use pfn calculation to
handle it properly.
Without the fix, a wrong number of page might be skipped. Since skip cannot be
negative, scan_movable_page() will end early and might miss a movable page with
-ENOENT. This might fail offline_pages(). No bug is reported. The fix comes
from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-4-zi.yan@sent.com
Fixes: eeb0efd071 ("mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use nth_page() to handle
it properly.
A wrong or non-existing page might be tried to be grabbed, either
leading to a non freeable page or kernel memory access errors. No bug
is reported. It comes from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-3-zi.yan@sent.com
Fixes: 57a196a584 ("hugetlb: simplify hugetlb handling in follow_page_mask")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Use nth_page() in place of direct struct page manipulation",
v3.
On SPARSEMEM without VMEMMAP, struct page is not guaranteed to be
contiguous, since each memory section's memmap might be allocated
independently. hugetlb pages can go beyond a memory section size, thus
direct struct page manipulation on hugetlb pages/subpages might give wrong
struct page. Kernel provides nth_page() to do the manipulation properly.
Use that whenever code can see hugetlb pages.
This patch (of 5):
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use nth_page() to handle
it properly.
Without the fix, page_kasan_tag_reset() could reset wrong page tags,
causing a wrong kasan result. No related bug is reported. The fix
comes from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20230913201248.452081-2-zi.yan@sent.com
Fixes: 2813b9c029 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This isolate_mode_t flag is effectively unused since 89f6c88a6a ("mm:
__isolate_lru_page_prepare() in isolate_migratepages_block()") as
sc->may_unmap is now checked directly (and only node_reclaim has a mode
that sets it to 0). The last remaining place is mm_vmscan_lru_isolate
tracepoint for the isolate_mode parameter. That one was mainly used to
indicate the active/inactive mode, which the trace-vmscan-postprocess.pl
script consumed, but that got silently broken. After fixing the script by
the previous patch, it does not need the isolate_mode anymore. So just
remove the parameter and with that the whole ISOLATE_UNMAPPED flag.
Link: https://lkml.kernel.org/r/20230914131637.12204-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: add a tracepoint for damos apply target regions",
v2.
DAMON provides damon_aggregated tracepoint to let users record full
monitoring results. Sometimes, users need to record monitoring results of
specific pattern. DAMOS tried regions directory of DAMON sysfs interface
allows it, but the interface is mainly designed for snapshots and
therefore would be inefficient for such recording. Implement yet another
tracepoint for efficient support of the usecase.
This patch (of 2):
DAMON provides damon_aggregated tracepoint, which exposes details of each
region and its access monitoring results. It is useful for getting whole
monitoring results, e.g., for recording purposes.
For investigations of DAMOS, DAMON Sysfs interface provides DAMOS
statistics and tried_regions directory. But, those provides only
statistics and snapshots. If the scheme is frequently applied and if the
user needs to know every detail of DAMOS behavior, the snapshot-based
interface could be insufficient and expensive.
As a last resort, userspace users need to record the all monitoring
results via damon_aggregated tracepoint and simulate how DAMOS would
worked. It is unnecessarily complicated. DAMON kernel API users,
meanwhile, can do that easily via before_damos_apply() callback field of
'struct damon_callback', though.
Add a tracepoint that will be called just after before_damos_apply()
callback for more convenient investigations of DAMOS. The tracepoint
exposes all details about each regions, similar to damon_aggregated
tracepoint.
Please note that DAMOS is currently not only for memory management but
also for query-like efficient monitoring results retrievals (when 'stat'
action is used). Until now, only statistics or snapshots were supported.
Addition of this tracepoint allows efficient full recording of DAMOS-based
filtered monitoring results.
Link: https://lkml.kernel.org/r/20230913022050.2109-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230913022050.2109-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [tracing]
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Directly check the return of isolate_hugetlb() and folio_isolate_lru() to
remove isolated variable, also setup err = -EBUSY in advance before
isolation, and update err only when successfully queued for migration,
which could help us to unify and simplify code a bit.
Link: https://lkml.kernel.org/r/20230913095131.2426871-9-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is some different between hugeTLB and THP behave when passed the
address of a tail page, for THP, it will migrate the entire THP page, but
for HugeTLB, it will return -EACCES, or -ENOENT before commit e66f17ff71
("mm/hugetlb: take page table lock in follow_huge_pmd()"),
-EACCES The page is mapped by multiple processes and can be moved
only if MPOL_MF_MOVE_ALL is specified.
-ENOENT The page is not present.
But when check manual[1], both of the two errnos are not suitable, it is
better to keep the same behave between hugetlb and THP when passed the
address of a tail page, so let's just remove the PageHead() check for
HugeTLB.
[1] https://man7.org/linux/man-pages/man2/move_pages.2.html
Link: https://lkml.kernel.org/r/20230913095131.2426871-8-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use a folio in add_page_for_migration() to save compound_head() calls.
Link: https://lkml.kernel.org/r/20230913095131.2426871-7-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use __folio_test_movable(), no need to convert from folio to page again.
Link: https://lkml.kernel.org/r/20230913095131.2426871-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
At present, numa balance only support base page and PMD-mapped THP, but we
will expand to support to migrate large folio/pte-mapped THP in the
future, it is better to make migrate_misplaced_page() to take a folio
instead of a page, and rename it to migrate_misplaced_folio(), it is a
preparation, also this remove several compound_head() calls.
Link: https://lkml.kernel.org/r/20230913095131.2426871-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename numamigrate_isolate_page() to numamigrate_isolate_folio(), then
make it takes a folio and use folio API to save compound_head() calls.
Link: https://lkml.kernel.org/r/20230913095131.2426871-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The check of THP mapped by multiple processes was introduced by commit
04fa5d6a65 ("mm: migrate: check page_count of THP before migrating") and
refactor by commit 340ef3902c ("mm: numa: cleanup flow of transhuge page
migration"), which is out of date, since migrate_misplaced_page() is now
using the standard migrate_pages() for small pages and THPs, the reference
count checking is in folio_migrate_mapping(), so let's remove the special
check for THP.
Link: https://lkml.kernel.org/r/20230913095131.2426871-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: migrate: more folio conversion and unification", v3.
Convert more migrate functions to use a folio, it is also a preparation
for large folio migration support when balancing numa.
This patch (of 8):
The assert VM_BUG_ON_PAGE(order && !PageTransHuge(page), page) is not very
useful,
1) for a tail/base page, order = 0, for a head page, the order > 0 &&
PageTransHuge() is true
2) there is a PageCompound() check and only base page is handled in
do_numa_page(), and do_huge_pmd_numa_page() only handle PMD-mapped
THP
3) even though the page is a tail page, isolate_lru_page() will post
a warning, and fail to isolate the page
4) if large folio/pte-mapped THP migration supported in the future,
we could migrate the entire folio if numa fault on a tail page
so just remove the check.
Link: https://lkml.kernel.org/r/20230913095131.2426871-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20230913095131.2426871-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's pass a folio; we are always mapping the entire thing.
Link: https://lkml.kernel.org/r/20230913125113.313322-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's sanity-check PageAnonExclusive vs. mapcount in page_add_anon_rmap()
and hugepage_add_anon_rmap() after setting PageAnonExclusive simply by
re-reading the mapcounts.
We can stop initializing the "first" variable in page_add_anon_rmap() and
no longer need an atomic_inc_and_test() in hugepage_add_anon_rmap().
While at it, switch to VM_WARN_ON_FOLIO().
[david@redhat.com: update check for doubly-mapped page]
Link: https://lkml.kernel.org/r/d8e5a093-2e22-c14b-7e64-6da280398d9f@redhat.com
Link: https://lkml.kernel.org/r/20230913125113.313322-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If swapin code would ever decide to not use order-0 pages and supply a
PTE-mapped large folio, we will have to change how we call
__folio_set_anon() -- eventually with exclusive=false and an adjusted
address. For now, let's add a VM_WARN_ON_FOLIO() with a comment about the
situation.
Link: https://lkml.kernel.org/r/20230913125113.313322-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's handle it in the caller; no need for the "first" check based on the
mapcount.
We really only end up with !anon pages in page_add_anon_rmap() via
do_swap_page(), where we hold the folio lock. So races are not possible.
Add a VM_WARN_ON_FOLIO() to make sure that we really hold the folio lock.
In the future, we might want to let do_swap_page() use
folio_add_new_anon_rmap() on new pages instead: however, we might have to
pass then whether the folio is exclusive or not. So keep it in there for
now.
For hugetlb we never expect to have a non-anon page in
hugepage_add_anon_rmap(). Remove that code, along with some other checks
that are either not required or were checked in
hugepage_add_new_anon_rmap() already.
Link: https://lkml.kernel.org/r/20230913125113.313322-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's handle it in the caller. No need to pass the page. While at it,
rename the function to __folio_set_anon() and pass "bool exclusive"
instead of "int exclusive".
Link: https://lkml.kernel.org/r/20230913125113.313322-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Anon rmap cleanups".
Some cleanups around rmap for anon pages. I'm working on more cleanups
also around file rmap -- also to handle the "compound" parameter
internally only and to let hugetlb use page_add_file_rmap(), but these
changes make sense separately.
This patch (of 6):
That comment was added in commit 5dbe0af47f ("mm: fix kernel BUG at
mm/rmap.c:1017!") to document why we can see vma->vm_end getting adjusted
concurrently due to a VMA split.
However, the optimized locking code was changed again in bf181b9f9d ("mm
anon rmap: replace same_anon_vma linked list with an interval tree.").
... and later, the comment was changed in commit 0503ea8f5b ("mm/mmap:
remove __vma_adjust()") to talk about "vma_merge" although the original
issue was with VMA splitting.
Let's just remove that comment. Nowadays, it's outdated, imprecise and
confusing.
Link: https://lkml.kernel.org/r/20230913125113.313322-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230913125113.313322-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
At present, we support per-memcg reclaim strategy, however we do not know
the number of transparent huge pages being reclaimed, as we know the
transparent huge pages need to be splited before reclaim them, and they
will bring some performance bottleneck effect. for example, when two
memcg (A & B) are doing reclaim for anonymous pages at same time, and 'A'
memcg is reclaiming a large number of transparent huge pages, we can
better analyze that the performance bottleneck will be caused by 'A'
memcg. therefore, in order to better analyze such problems, there add THP
swap out info for per-memcg.
[akpm@linux-foundation.orgL fix swap_writepage_fs(), per Johannes]
Link: https://lkml.kernel.org/r/20230913213343.GB48476@cmpxchg.org
Link: https://lkml.kernel.org/r/20230913164938.16918-1-vernhao@tencent.com
Signed-off-by: Xin Hao <vernhao@tencent.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When looking at the code in the memory part, I found that the purpose of
the function prepare_scan_countis very different from the function name.
It is easy to misunderstand when reading.The function prepare_scan_count
mainly completes the assignment of the scan_control structure.Therefore, I
suggest that the function name can be changed to prepare_scan_control,
which is easier to understand.
Link: https://lkml.kernel.org/r/20230912085923.27238-1-liujinlong@kylinos.cn
Signed-off-by: liujinlong <liujinlong@kylinos.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now there are no readers of shrinker_rwsem, so we can simply replace it
with mutex lock.
[akpm@linux-foundation.org: update the fix to alloc_shrinker_info()]
Link: https://lkml.kernel.org/r/20230911094444.68966-46-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For now, reparent_shrinker_deferred() is the only holder of read lock of
shrinker_rwsem. And it already holds the global cgroup_mutex, so it will
not be called in parallel.
Therefore, in order to convert shrinker_rwsem to shrinker_mutex later,
here we change to hold the write lock of shrinker_rwsem to reparent.
Link: https://lkml.kernel.org/r/20230911094444.68966-45-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the new shrinker APIs, there is no action such as prealloc, so rename
{prealloc|unregister}_memcg_shrinker() to shrinker_memcg_{alloc|remove}(),
which corresponds to the idr_{alloc|remove}() inside the function.
Link: https://lkml.kernel.org/r/20230911094444.68966-42-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for implementing lockless slab shrink, use new APIs to
dynamically allocate the mm-zspool shrinker, so that it can be freed
asynchronously via RCU. Then it doesn't need to wait for RCU read-side
critical section when releasing the struct zs_pool.
Link: https://lkml.kernel.org/r/20230911094444.68966-38-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "use refcount+RCU method to implement lockless slab shrink",
v6.
1. Background
=============
We used to implement the lockless slab shrink with SRCU [1], but then kernel
test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test
case [2], so we reverted it [3].
This patch series aims to re-implement the lockless slab shrink using the
refcount+RCU method proposed by Dave Chinner [4].
[1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
2. Implementation
=================
Currently, the shrinker instances can be divided into the following three types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such as
mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b, the
memory of shrinker instance will be freed after synchronize_rcu() when the
module is unloaded. For case c, the memory of shrinker instance will be freed
along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to dynamically
allocate those shrinker instances in case c, then the memory can be dynamically
freed alone by calling kfree_rcu().
This patchset adds the following new APIs for dynamically allocating shrinker,
and add a private_data field to struct shrinker to record and get the original
embedded structure.
1. shrinker_alloc()
2. shrinker_register()
3. shrinker_free()
In order to simplify shrinker-related APIs and make shrinker more independent of
other kernel mechanisms, this patchset uses the above APIs to convert all
shrinkers (including case a and b) to dynamically allocated, and then remove all
existing APIs. This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing out of tree
code and third party modules using the old API and will no longer work with a
kernel using lockless slab shrinkers. They need to break (both at the source and
binary levels) to stop bad things from happening due to using uncoverted
shrinkers in the new setup.
```
Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}()
to ensure that the shrinker instance is valid. And the shrinker::refcount
mechanism ensures that the shrinker instance will not be run again after
unregistration. So the structure that records the pointer of shrinker instance
can be safely freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to be
blocked in unregister_shrinker() to wait RCU read-side critical section.
PATCH 1: introduce new APIs
PATCH 2~38: convert all shrinnkers to use new APIs
PATCH 39: remove old APIs
PATCH 40~41: some cleanups and preparations
PATCH 42-43: implement the lockless slab shrink
PATCH 44~45: convert shrinker_rwsem to mutex
3. Testing
==========
3.1 slab shrink stress test
---------------------------
We can reproduce the down_read_trylock() hotspot through the following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what we
expect.
3.2 registration and unregistration stress test
-----------------------------------------------
Run the command below to test:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
This patch (of 45):
Currently, the shrinker instances can be divided into the following three
types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such
as mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b,
the memory of shrinker instance will be freed after synchronize_rcu() when
the module is unloaded. For case c, the memory of shrinker instance will
be freed along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to
dynamically allocate those shrinker instances in case c, then the memory
can be dynamically freed alone by calling kfree_rcu().
So this commit adds the following new APIs for dynamically allocating
shrinker, and add a private_data field to struct shrinker to record and
get the original embedded structure.
1. shrinker_alloc()
Used to allocate shrinker instance itself and related memory, it will
return a pointer to the shrinker instance on success and NULL on failure.
2. shrinker_register()
Used to register the shrinker instance, which is same as the current
register_shrinker_prepared().
3. shrinker_free()
Used to unregister (if needed) and free the shrinker instance.
In order to simplify shrinker-related APIs and make shrinker more
independent of other kernel mechanisms, subsequent submissions will use
the above API to convert all shrinkers (including case a and b) to
dynamically allocated, and then remove all existing APIs.
This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing
out of tree code and third party modules using the old API and will
no longer work with a kernel using lockless slab shrinkers. They
need to break (both at the source and binary levels) to stop bad
things from happening due to using unconverted shrinkers in the new
setup.
```
[zhengqi.arch@bytedance.com: mm: shrinker: some cleanup]
Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, synchronize_shrinkers() is only used by TTM pool. It only
requires that no shrinkers run in parallel.
After we use RCU+refcount method to implement the lockless slab shrink, we
can not use shrinker_rwsem or synchronize_rcu() to guarantee that all
shrinker invocations have seen an update before freeing memory.
So we introduce a new pool_shrink_rwsem to implement a private
ttm_pool_synchronize_shrinkers(), so as to achieve the same purpose.
Link: https://lkml.kernel.org/r/20230911092517.64141-5-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
debugfs_remove_recursive() will wait for debugfs_file_put() to return, so
the shrinker will not be freed when doing debugfs operations (such as
shrinker_debugfs_count_show() and shrinker_debugfs_scan_write()), so there
is no need to hold shrinker_rwsem during debugfs operations.
Link: https://lkml.kernel.org/r/20230911092517.64141-4-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mm/vmscan.c file is too large, so separate the shrinker-related code
from it into a separate file. No functional changes.
Link: https://lkml.kernel.org/r/20230911092517.64141-3-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "cleanups for lockless slab shrink", v4.
This series is some cleanups for lockless slab shrink.
This patch (of 4):
The following functions are only used inside the mm subsystem, so it's
better to move their declarations to the mm/internal.h file.
1. shrinker_debugfs_add()
2. shrinker_debugfs_detach()
3. shrinker_debugfs_remove()
Link: https://lkml.kernel.org/r/20230911092517.64141-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911092517.64141-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a regression test for the special case where memcpy() previously
failed to correctly set the origins: if upon memcpy() four aligned
initialized bytes with a zero origin value ended up split between two
aligned four-byte chunks, one of those chunks could've received the zero
origin value even despite it contained uninitialized bytes from other
writes.
Link: https://lkml.kernel.org/r/20230911145702.2663753-4-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce report_reset() that allows checking for more than one KMSAN
report per testcase.
Fold test_memcpy_aligned_to_unaligned2() into
test_memcpy_aligned_to_unaligned(), so that they share the setup phase and
check the behavior of a single memcpy() call.
Link: https://lkml.kernel.org/r/20230911145702.2663753-3-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Clang 18 learned to optimize away memcpy() calls of small uninitialized
scalar values. To ensure that memcpy tests in kmsan_test.c still perform
calls to memcpy() (which KMSAN replaces with __msan_memcpy()), declare a
separate memcpy_noinline() function with volatile parameters, which won't
be optimized.
Also retire DO_NOT_OPTIMIZE(), as memcpy_noinline() is apparently enough.
Link: https://lkml.kernel.org/r/20230911145702.2663753-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmsan_internal_memmove_metadata() is the function that implements copying
metadata every time memcpy()/memmove() is called. Because shadow memory
stores 1 byte per each byte of kernel memory, copying the shadow is
trivial and can be done by a single memmove() call.
Origins, on the other hand, are stored as 4-byte values corresponding to
every aligned 4 bytes of kernel memory. Therefore, if either the source
or the destination of kmsan_internal_memmove_metadata() is unaligned, the
number of origin slots corresponding to the source or destination may
differ:
1) memcpy(0xffff888080a00000, 0xffff888080900000, 4)
copies 1 origin slot into 1 origin slot:
src (0xffff888080900000): xxxx
src origins: o111
dst (0xffff888080a00000): xxxx
dst origins: o111
2) memcpy(0xffff888080a00001, 0xffff888080900000, 4)
copies 1 origin slot into 2 origin slots:
src (0xffff888080900000): xxxx
src origins: o111
dst (0xffff888080a00000): .xxx x...
dst origins: o111 o111
3) memcpy(0xffff888080a00000, 0xffff888080900001, 4)
copies 2 origin slots into 1 origin slot:
src (0xffff888080900000): .xxx x...
src origins: o111 o222
dst (0xffff888080a00000): xxxx
dst origins: o111
(or o222)
Previously, kmsan_internal_memmove_metadata() tried to solve this problem
by copying min(src_slots, dst_slots) as is and cloning the missing slot on
one of the ends, if needed.
This was error-prone even in the simple cases where 4 bytes were copied,
and did not account for situations where the total number of nonzero
origin slots could have increased by more than one after copying:
memcpy(0xffff888080a00000, 0xffff888080900002, 8)
src (0xffff888080900002): ..xx .... xx..
src origins: o111 0000 o222
dst (0xffff888080a00000): xx.. ..xx
o111 0000
(or 0000 o222)
The new implementation simply copies the shadow byte by byte, and updates
the corresponding origin slot, if the shadow byte is nonzero. This
approach can handle complex cases with mixed initialized and uninitialized
bytes. Similarly to KMSAN inline instrumentation, latter writes to bytes
sharing the same origin slots take precedence.
Link: https://lkml.kernel.org/r/20230911145702.2663753-1-glider@google.com
Fixes: f80be4571b ("kmsan: add KMSAN runtime core")
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 434ed3350f ("memfd: improve userspace warnings for missing
exec-related flags") attempted to make these warnings more useful (so
they would work as an incentive to get users to switch to specifying
these flags -- as intended by the original MFD_NOEXEC_SEAL patchset).
Unfortunately, it turns out that even INFO-level logging is too extreme
to enable by default and alternative solutions to the spam issue (such
as doing more extreme rate-limiting per-task) are either too ugly or
overkill for something as simple as emitting a log as a developer aid.
Given that the flags are new and there is no harm to not specifying them
(after all, we maintain backwards compatibility) we can just drop the
warnings for now until some time in the future when most programs have
migrated and distributions start using vm.memfd_noexec=1 (where failing
to pass the flag would result in unexpected errors for programs that use
executable memfds).
Link: https://lkml.kernel.org/r/20230912-memfd-reduce-spam-v2-1-7d92a4964b6a@cyphar.com
Fixes: 434ed3350f ("memfd: improve userspace warnings for missing exec-related flags")
Fixes: 2562d67b1b ("revert "memfd: improve userspace warnings for missing exec-related flags".")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Reported-by: Damian Tometzki <dtometzki@fedoraproject.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The value of “.fs_flags” in line 4608 is a dead code which will never
be implemented，because its conditions of line 47 "#ifdef CONFIG_SHMEM"
and line 4607 are mutually exclusive. It is recommended to delete
redundant code.
Link: https://lkml.kernel.org/r/20230906045012.14999-1-sunying@nj.iscas.ac.cn
Signed-off-by: Ying Sun <sunying@nj.iscas.ac.cn>
Suggested-by: Yanjie Ren <renyanjie01@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If panic is enable,the err information will not be printed before bugon,
So swap it. Print the return value of PTR_ERR(pgdat->kswapd) also.
Link: https://lkml.kernel.org/r/20230906083700.181-1-angus.chen@jaguarmicro.com
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In vmemmap_remap_free(), a new head vmemmap page is allocated to avoid
breaking a contiguous block of struct page memory, however, the allocation
can always fail when the given node is movable node. Remove the
__GFP_THISNODE to help avoid fragmentation.
Link: https://lkml.kernel.org/r/20230906093157.9737-1-yuancan@huawei.com
Signed-off-by: Yuan Can <yuancan@huawei.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
expand_upwards() and expand_downwards() will return -EFAULT if VM_GROWSUP
or VM_GROWSDOWN is not correctly set in vma->vm_flags, however in
!CONFIG_STACK_GROWSUP case, expand_stack_locked() returns -EINVAL first if
!(vma->vm_flags & VM_GROWSDOWN) before calling expand_downwards(), to keep
the consistency with CONFIG_STACK_GROWSUP case, remove this check.
The usages of this function are as below:
A:fs/exec.c
ret = expand_stack_locked(vma, stack_base);
if (ret)
ret = -EFAULT;
or
B:mm/memory.c mm/mmap.c
if (expand_stack_locked(vma, addr))
return NULL;
which means the return value will not propagate to other places, so I
believe there is no user-visible effects of this change, and it's
unnecessary to backport to earlier versions.
Link: https://lkml.kernel.org/r/20230906103312.645712-1-xiujianfeng@huaweicloud.com
Fixes: f440fa1ac9 ("mm: make find_extend_vma() fail if write lock not held")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_aggregateed tracepoint is receiving 'struct target *', but doesn't
use it. Remove it from the prototype.
Link: https://lkml.kernel.org/r/20230907022929.91361-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The comment on damon_set_attrs() says it should not be called while the
kdamond is running, but now some DAMON modules like sysfs interface and
DAMON_RECLAIM call it from after_aggregation() and/or
after_wmarks_check() callbacks for online tuning. Update the comment.
Link: https://lkml.kernel.org/r/20230907022929.91361-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Out of zswap's 3 allocators, zsmalloc is the clear superior in terms of
memory utilization, both in theory and as observed in practice, with its
high storage density and low internal fragmentation. zsmalloc is also
more actively developed and maintained, since it is the allocator of
choice for zswap for many users, as well as the only allocator for zram.
A historical objection to the selection of zsmalloc as the default
allocator for zswap is its lack of writeback capability. However, this
has changed, with the zsmalloc writeback patchset, and the subsequent
zswap LRU refactor. With this, there is not a lot of good reasons to keep
zbud, an otherwise inferior allocator, as the default instead of zswap.
This patch changes the default allocator to zsmalloc. The only exception
is on settings without MMU, in which case zbud will remain as the default.
Link: https://lkml.kernel.org/r/20230908235115.2943486-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For the stack move happening in shift_arg_pages(), the move is happening
within the same VMA which spans the old and new ranges.
In case the aligned address happens to fall within that VMA, allow such
moves and don't abort the mremap alignment optimization.
In the regular non-stack mremap case, we cannot allow any such moves as
will end up destroying some part of the mapping (either the source of the
move, or part of the existing mapping). So just avoid it for stack moves.
Link: https://lkml.kernel.org/r/20230903151328.2981432-3-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Optimize mremap during mutual alignment within PMD", v6.
This patchset optimizes the start addresses in move_page_tables() and
tests the changes. It addresses a warning [1] that occurs due to a
downward, overlapping move on a mutually-aligned offset within a PMD
during exec. By initiating the copy process at the PMD level when such
alignment is present, we can prevent this warning and speed up the copying
process at the same time. Linus Torvalds suggested this idea. Check the
individual patches for more details. [1]
https://lore.kernel.org/all/ZB2GTBD%2FLWTrkOiO@dhcp22.suse.cz/
This patch (of 7):
Recently, we see reports [1] of a warning that triggers due to
move_page_tables() doing a downward and overlapping move on a
mutually-aligned offset within a PMD. By mutual alignment, I mean the
source and destination addresses of the mremap are at the same offset
within a PMD.
This mutual alignment along with the fact that the move is downward is
sufficient to cause a warning related to having an allocated PMD that does
not have PTEs in it.
This warning will only trigger when there is mutual alignment in the move
operation. A solution, as suggested by Linus Torvalds [2], is to initiate
the copy process at the PMD level whenever such alignment is present.
Implementing this approach will not only prevent the warning from being
triggered, but it will also optimize the operation as this method should
enhance the speed of the copy process whenever there's a possibility to
start copying at the PMD level.
Some more points:
a. The optimization can be done only when both the source and
destination of the mremap do not have anything mapped below it up to a
PMD boundary. I add support to detect that.
b. #1 is not a problem for the call to move_page_tables() from exec.c as
nothing is expected to be mapped below the source. However, for
non-overlapping mutually aligned moves as triggered by mremap(2), I
added support for checking such cases.
c. I currently only optimize for PMD moves, in the future I/we can build
on this work and do PUD moves as well if there is a need for this. But I
want to take it one step at a time.
d. We need to be careful about mremap of ranges within the VMA itself.
For this purpose, I added checks to determine if the address after
alignment falls within its VMA itself.
[1] https://lore.kernel.org/all/ZB2GTBD%2FLWTrkOiO@dhcp22.suse.cz/
[2] https://lore.kernel.org/all/CAHk-=whd7msp8reJPfeGNyt0LiySMT0egExx3TVZSX3Ok6X=9g@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230903151328.2981432-1-joel@joelfernandes.org
Link: https://lkml.kernel.org/r/20230903151328.2981432-2-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The decreasing of hugetlb pages number failed with the following message
given:
sh: page allocation failure: order:0, mode:0x204cc0(GFP_KERNEL|__GFP_RETRY_MAYFAIL|__GFP_THISNODE)
CPU: 1 PID: 112 Comm: sh Not tainted 6.5.0-rc7-... #45
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.6+0x84/0xe4
show_stack+0x18/0x24
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x24
warn_alloc+0x100/0x1bc
__alloc_pages_slowpath.constprop.107+0xa40/0xad8
__alloc_pages+0x244/0x2d0
hugetlb_vmemmap_restore+0x104/0x1e4
__update_and_free_hugetlb_folio+0x44/0x1f4
update_and_free_hugetlb_folio+0x20/0x68
update_and_free_pages_bulk+0x4c/0xac
set_max_huge_pages+0x198/0x334
nr_hugepages_store_common+0x118/0x178
nr_hugepages_store+0x18/0x24
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x40/0x54
kernfs_fop_write_iter+0x164/0x1dc
vfs_write+0x3a8/0x460
ksys_write+0x6c/0x100
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x44/0x100
el0_svc_common.constprop.1+0x6c/0xe4
do_el0_svc+0x38/0x94
el0_svc+0x28/0x74
el0t_64_sync_handler+0xa0/0xc4
el0t_64_sync+0x174/0x178
Mem-Info:
...
The reason is that the hugetlb pages being released are allocated from
movable nodes, and with hugetlb_optimize_vmemmap enabled, vmemmap pages
need to be allocated from the same node during the hugetlb pages
releasing. With GFP_KERNEL and __GFP_THISNODE set, allocating from movable
node is always failed. Fix this problem by removing __GFP_THISNODE.
Link: https://lkml.kernel.org/r/20230905124503.24899-1-yuancan@huawei.com
Fixes: ad2fa3717b ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use this_cpu_try_cmpxchg instead of this_cpu_cmpxchg (*ptr, old, new) ==
old in mod_zone_state and mod_node_state. x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after cmpxchg (and
related move instruction in front of cmpxchg).
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails. There is no need to re-read the value in the loop.
No functional change intended.
Link: https://lkml.kernel.org/r/20230904150917.8318-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The one caller of DAX lock/unlock page already calls compound_head(), so
use page_folio() instead, then use a folio throughout the DAX code to
remove uses of page->mapping and page->index.
[jane.chu@oracle.com: add comment to mf_generic_kill_procss(), simplify mf_generic_kill_procs:folio initialization]
Link: https://lkml.kernel.org/r/20230908222336.186313-1-jane.chu@oracle.com
Link: https://lkml.kernel.org/r/20230822231314.349200-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The feature got retired in f1a7941243 ("mm: convert mm's rss stats into
percpu_counter"), but the patch failed to fully clean it up.
Link: https://lkml.kernel.org/r/20230823170556.2281747-1-mjguzik@gmail.com
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In skip_cma(), we can use folio_migratetype() to replace
get_pageblock_migratetype().
Link: https://lkml.kernel.org/r/20230825075735.52436-1-user@VERNHAO-MC1
Signed-off-by: Vern Hao <vernhao@tencent.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
si_mem_available() needlessly places LRU statistics into an array before
retrieving only two of them, simply access those directly.
In addition, refactor the code so that the blocks of code which calculate
the page cache and reclaimable components each resemble one another to
clearly indicate we cap both against wmark_low in the same fashion.
Link: https://lkml.kernel.org/r/20230827110848.43510-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In set_nr_huge_pages(), local variable "count" is used to record
persistent_huge_pages(), but when it cames to nodes huge page allocation,
the semantics changes to nr_huge_pages. When there exists surplus huge
pages and using the interface under
/sys/devices/system/node/node*/hugepages to change huge page pool size,
this difference can result in the allocation of an unexpected number of
huge pages.
Steps to reproduce the bug:
Starting with:
Node 0 Node 1 Total
HugePages_Total 0.00 0.00 0.00
HugePages_Free 0.00 0.00 0.00
HugePages_Surp 0.00 0.00 0.00
create 100 huge pages in Node 0 and consume it, then set Node 0 's
nr_hugepages to 0.
yields:
Node 0 Node 1 Total
HugePages_Total 200.00 0.00 200.00
HugePages_Free 0.00 0.00 0.00
HugePages_Surp 200.00 0.00 200.00
write 100 to Node 1's nr_hugepages
echo 100 > /sys/devices/system/node/node1/\
hugepages/hugepages-2048kB/nr_hugepages
gets:
Node 0 Node 1 Total
HugePages_Total 200.00 400.00 600.00
HugePages_Free 0.00 400.00 400.00
HugePages_Surp 200.00 0.00 200.00
Kernel is expected to create only 100 huge pages and it gives 200.
Link: https://lkml.kernel.org/r/20230829033343.467779-1-xueshi.hu@smartx.com
Fixes: 9a30523066 ("hugetlb: add per node hstate attributes")
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, vmemmap optimization of hugetlb pages is performed before the
hugetlb flag (previously hugetlb destructor) is set identifying it as a
hugetlb folio. This means there is a window of time where an ordinary
folio does not have all associated vmemmap present. The core mm only
expects vmemmap to be potentially optimized for hugetlb and device dax.
This can cause problems in code such as memory error handling that may
want to write to tail struct pages.
There is only one call to perform hugetlb vmemmap optimization today. To
fix this issue, simply set the hugetlb flag before that call.
There was a similar issue in the free hugetlb path that was previously
addressed. The two routines that optimize or restore hugetlb vmemmap
should only be passed hugetlb folios/pages. To catch any callers not
following this rule, add VM_WARN_ON calls to the routines. In the hugetlb
free code paths, some calls could be made to restore vmemmap after
clearing the hugetlb flag. This was 'safe' as in these cases vmemmap was
already present and the call was a NOOP. However, for consistency these
calls where eliminated so that we can add the VM_WARN_ON checks.
Link: https://lkml.kernel.org/r/20230829213734.69673-1-mike.kravetz@oracle.com
Fixes: f41f2ed43c ("mm: hugetlb: free the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix insert_vm_struct() so that only accounted memory is unaccounted if
vma_link() fails.
Link: https://lkml.kernel.org/r/20230830004324.16101-1-anthony.yznaga@oracle.com
Fixes: d4af56c5c7 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix mremap so that only accounted memory is unaccounted if the mapping is
expandable but vma_merge() fails.
Link: https://lkml.kernel.org/r/20230830004549.16131-1-anthony.yznaga@oracle.com
Fixes: fdbef61491 ("mm/mremap: don't account pages in vma_to_resize()")
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We always do zone_watermark_ok check and compaction_suitable check
together to test if compaction for target order should be ran. Factor
these code out to remove repeat code.
Link: https://lkml.kernel.org/r/20230901155141.249860-7-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We do proactive compaction with order == -1 via
1. /proc/sys/vm/compact_memory
2. /sys/devices/system/node/nodex/compact
3. /proc/sys/vm/compaction_proactiveness
Add missed situation in which order == -1.
Link: https://lkml.kernel.org/r/20230901155141.249860-6-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We have compact_blockskip_flush check in __reset_isolation_suitable, just
remove repeat check before __reset_isolation_suitable in
compact_blockskip_flush.
Link: https://lkml.kernel.org/r/20230901155141.249860-5-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In strict mode, we should return 0 if there is any hole in pageblock. If
we successfully isolated pages at beginning at pageblock and then have a
bogus compound_order outside pageblock in next page. We will abort search
loop with blockpfn > end_pfn. Although we will limit blockpfn to end_pfn,
we will treat it as a successful isolation in strict mode as blockpfn is
not < end_pfn and return partial isolated pages. Then
isolate_freepages_range may success unexpectly with hole in isolated
range.
Link: https://lkml.kernel.org/r/20230901155141.249860-4-shikemeng@huaweicloud.com
Fixes: 9fcd6d2e05 ("mm, compaction: skip compound pages by order in free scanner")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We use move_freelist_head after list_for_each_entry_reverse to skip recent
pages. And there is no need to do actual move if all freepages are
searched in list_for_each_entry_reverse, e.g. freepage point to first
page in freelist. It's more intuitively to call list_is_first with list
entry as the first argument and list head as the second argument to check
if list entry is the first list entry instead of call list_is_last with
list entry and list head passed in reverse.
Similarly, call list_is_last in move_freelist_tail is more intuitively.
Link: https://lkml.kernel.org/r/20230901155141.249860-3-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fixes and cleanups to compaction", v3.
This is a series to do fix and clean up to compaction.
Patch 1-2 fix and clean up freepage list operation.
Patch 3-4 fix and clean up isolation of freepages
Patch 7 factor code to check if compaction is needed for allocation order.
More details can be found in respective patches.
This patch (of 6):
The freepage is chained with buddy_list in freelist head. Use buddy_list
instead of lru to correct the list operation.
Link: https://lkml.kernel.org/r/20230901155141.249860-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20230901155141.249860-2-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With fs/binfmt_elf.c fully refactored to use the new elf_load() helper,
there are no more users of vm_brk(), so remove it.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Suggested-by: Eric Biederman <ebiederm@xmission.com>
Tested-by: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20230929032435.2391507-6-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
After the previous cleanups, we can now move some code from
calc_slab_order() to calculate_order() so it's executed just once, and
do some more cleanups.
- move the min_order and MAX_OBJS_PER_PAGE evaluation to
calculate_order().
- change calc_slab_order() parameter min_objects to min_order
Also make MAX_OBJS_PER_PAGE check more robust by considering also
min_objects in addition to slub_min_order. Otherwise this is not a
functional change.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Reviewed-and-tested-by: Jay Patel <jaypatel@linux.ibm.com>
The main loop in calculate_order() currently tries to find an order with
at most 1/4 waste. If that's impossible (for particular large object
sizes), there's a fallback that will try to place one object within
slab_max_order.
If we expand the loop boundary to also allow up to 1/2 waste as the last
resort, we can remove the fallback and simplify the code, as the loop
will find an order for such sizes as well. Note we don't need to allow
more than 1/2 waste as that will never happen - calc_slab_order() would
calculate more objects to fit, reducing waste below 1/2.
Successfully finding an order in the loop (compared to the fallback)
will also have the benefit in trying to satisfy min_objects, because the
fallback was passing 1. Thus the resulting slab orders might be larger
(not because it would improve waste, but to reduce pressure on shared
locks), which is one of the goals of calculate_order().
For example, with nr_cpus=1 and 4kB PAGE_SIZE, slub_max_order=3, before
the patch we would get the following orders for these object sizes:
2056 to 10920 - order-3 as selected by the loop
10928 to 12280 - order-2 due to fallback, as <1/4 waste is not possible
12288 to 32768 - order-3 as <1/4 waste is again possible
After the patch:
2056 to 32768 - order-3, because even in the range of 10928 to 12280 we
try to satisfy the calculated min_objects.
As a result the code is simpler and gives more consistent results.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Reviewed-and-tested-by: Jay Patel <jaypatel@linux.ibm.com>
calculate_order() currently has two nested loops. The inner one that
gradually modifies the acceptable waste from 1/16 up to 1/4, and the
outer one that decreases min_objects down to 2.
Upon closer inspection, the outer loop is unnecessary. Decreasing
min_objects could have in theory two effects to make the inner loop and
its call to calc_slab_order() succeed where a previous iteration with
higher min_objects would not:
- it could cause the min_objects-derived min_order to fit within
slub_max_order. But min_objects is already pre-capped to max_objects
that's derived from slub_max_order above the loops, so every iteration
tries at least slub_max_order in calc_slab_order()
- it could cause calc_slab_order() to be called with lower min_objects
thus potentially lower min_order in its loop. This would make a
difference if the lower order could cause the fractional waste test to
succeed where a higher order has already failed with same fract_leftover
in the previous iteration with a higher min_order. But that's not
possible, because increasing the order can only result in lower (or
same) fractional waste. If we increase the slab size 2 times, we will
fit at least 2 times the number of objects (thus same fraction of
waste), or it will allow us to fit one more object (lower fraction of
waste).
For more confidence I have tried adding a printk to notify when
decreasing min_objects resulted in a success, and simulated calculations
for a range of object sizes, nr_cpus and page_sizes. As expected, the
printk never triggered.
Thus remove the outer loop and adjust comments accordingly.
There's almost no functional change except a weird corner case when
slub_min_objects=1 on boot command line would cause the whole two nested
loops to be skipped before this patch. Now it would try to find the best
layout as usual, resulting in potentially higher orderthat minimizes
waste. This is not wrong and will be further expanded by the next patch.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Reviewed-and-tested-by: Jay Patel <jaypatel@linux.ibm.com>
If calculate_order() can't fit even a single large object within
slub_max_order, it will try using the smallest necessary order that may
exceed slub_max_order but not MAX_ORDER.
Currently this is done with a call to calc_slab_order() which is
unnecessary. We can simply use get_order(size). No functional change.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Reviewed-and-tested-by: Jay Patel <jaypatel@linux.ibm.com>
Currently there are 2 parameters could be setup from kernel cmdline:
slub_min_order and slub_max_order. It's possible that the user
configured slub_min_order is bigger than the default slub_max_order
[1], which can still take effect, as calculate_oder() will use MAX_ORDER
as a fallback to check against, but has some downsides:
* the kernel message about SLUB will be strange in showing min/max
orders:
SLUB: HWalign=64, Order=9-3, MinObjects=0, CPUs=16, Nodes=1
* in calculate_order() called by each slab, the 2 loops of
calc_slab_order() will all be meaningless due to slub_min_order
is bigger than slub_max_order
* prevent future code cleanup like in [2].
Fix it by adding some sanity check to enforce the min/max semantics.
[1]. https://lore.kernel.org/lkml/21a0ba8b-bf05-0799-7c78-2a35f8c8d52a@os.amperecomputing.com/
[2]. https://lore.kernel.org/lkml/20230908145302.30320-7-vbabka@suse.cz/
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
to issues which were introduced after 6.5.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZRmSDAAKCRDdBJ7gKXxA
jlSaAQCe3SnBdjRmuzbp5iIfNJOY7GXLN4NwMsArRUxRGY27IwD+KWhXZP/ydVnt
ZgS4x9rmarHuh5Pxds+6SRGhihRz/Ak=
=sf/5
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Fourteen hotfixes, eleven of which are cc:stable. The remainder
pertain to issues which were introduced after 6.5"
* tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Crash: add lock to serialize crash hotplug handling
selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error
mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified
mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
mm, memcg: reconsider kmem.limit_in_bytes deprecation
mm: zswap: fix potential memory corruption on duplicate store
arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries
mm: hugetlb: add huge page size param to set_huge_pte_at()
maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
maple_tree: add mas_is_active() to detect in-tree walks
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
mm: abstract moving to the next PFN
mm: report success more often from filemap_map_folio_range()
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
When calling mbind() with MPOL_MF_{MOVE|MOVEALL} | MPOL_MF_STRICT, kernel
should attempt to migrate all existing pages, and return -EIO if there is
misplaced or unmovable page. Then commit 6f4576e368 ("mempolicy: apply
page table walker on queue_pages_range()") messed up the return value and
didn't break VMA scan early ianymore when MPOL_MF_STRICT alone. The
return value problem was fixed by commit a7f40cfe3b ("mm: mempolicy:
make mbind() return -EIO when MPOL_MF_STRICT is specified"), but it broke
the VMA walk early if unmovable page is met, it may cause some pages are
not migrated as expected.
The code should conceptually do:
if (MPOL_MF_MOVE|MOVEALL)
scan all vmas
try to migrate the existing pages
return success
else if (MPOL_MF_MOVE* | MPOL_MF_STRICT)
scan all vmas
try to migrate the existing pages
return -EIO if unmovable or migration failed
else /* MPOL_MF_STRICT alone */
break early if meets unmovable and don't call mbind_range() at all
else /* none of those flags */
check the ranges in test_walk, EFAULT without mbind_range() if discontig.
Fixed the behavior.
Link: https://lkml.kernel.org/r/20230920223242.3425775-1-yang@os.amperecomputing.com
Fixes: a7f40cfe3b ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commits 86327e8eb9 ("memcg: drop kmem.limit_in_bytes") and
partially reverts 58056f7750 ("memcg, kmem: further deprecate
kmem.limit_in_bytes") which have incrementally removed support for the
kernel memory accounting hard limit. Unfortunately it has turned out that
there is still userspace depending on the existence of
memory.kmem.limit_in_bytes [1]. The underlying functionality is not
really required but the non-existent file just confuses the userspace
which fails in the result. The patch to fix this on the userspace side
has been submitted but it is hard to predict how it will propagate through
the maze of 3rd party consumers of the software.
Now, reverting alone 86327e8eb9 is not an option because there is
another set of userspace which cannot cope with ENOTSUPP returned when
writing to the file. Therefore we have to go and revisit 58056f7750 as
well. There are two ways to go ahead. Either we give up on the
deprecation and fully revert 58056f7750 as well or we can keep
kmem.limit_in_bytes but make the write a noop and warn about the fact.
This should work for both known breaking workloads which depend on the
existence but do not depend on the hard limit enforcement.
Note to backporters to stable trees. a8c49af3be ("memcg: add per-memcg
total kernel memory stat") introduced in 4.18 has added memcg_account_kmem
so the accounting is not done by obj_cgroup_charge_pages directly for v1
anymore. Prior kernels need to add it explicitly (thanks to Johannes for
pointing this out).
[akpm@linux-foundation.org: fix build - remove unused local]
Link: http://lkml.kernel.org/r/20230920081101.GA12096@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net [1]
Link: https://lkml.kernel.org/r/ZRE5VJozPZt9bRPy@dhcp22.suse.cz
Fixes: 86327e8eb9 ("memcg: drop kmem.limit_in_bytes")
Fixes: 58056f7750 ("memcg, kmem: further deprecate kmem.limit_in_bytes")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While stress-testing zswap a memory corruption was happening when writing
back pages. __frontswap_store used to check for duplicate entries before
attempting to store a page in zswap, this was because if the store fails
the old entry isn't removed from the tree. This change removes duplicate
entries in zswap_store before the actual attempt.
[cerasuolodomenico@gmail.com: add a warning and a comment, per Johannes]
Link: https://lkml.kernel.org/r/20230925130002.1929369-1-cerasuolodomenico@gmail.com
Link: https://lkml.kernel.org/r/20230922172211.1704917-1-cerasuolodomenico@gmail.com
Fixes: 42c06a0e8e ("mm: kill frontswap")
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215a ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0 ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0 ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Even though we had successfully mapped the relevant page, we would rarely
return success from filemap_map_folio_range(). That leads to falling back
from the VMA lock path to the mmap_lock path, which is a speed &
scalability issue. Found by inspection.
Link: https://lkml.kernel.org/r/20230920035336.854212-1-willy@infradead.org
Fixes: 617c28ecab ("filemap: batch PTE mappings")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmUWfrsACgkQu+CwddJF
iJo6+QgAnn3klZX5wOfH93tdlOz2TNy8QVSmNuITDKThLJg9r8YkQJdp6NYHR0Rc
vrbZ2pMqF/LQ/LW49uZahQwVi7811psfU3PqbSC3CRtUYq0RUMu5PaeItvRp4S5n
2zYiWVSNGfSmG4jQm2L2nMjDRK8m3oLKwuxKejv3UQLDZ5U1Fh36k75lZK1PERmu
+cBQATtncj4N1rF0eY8mif3ctqqkVqz79t/nU/FCBx0+v3s4wTzYB1y8l5FEH2cM
iU4A4jsZe147DxHadUQF2ahnj6oaOacgtg846WN5P73BjiRhdrJaTS8HSeAS/RIo
e/PpbLzOFp4Rz+2u1Me7nFK64qFjyw==
=+WB7
-----END PGP SIGNATURE-----
Merge tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- stable fix to prevent list corruption when destroying caches with
leftover objects (Rafael Aquini)
- fix for a gotcha in kmalloc_size_roundup() when calling it with too
high size, discovered when recently a networking call site had to be
fixed for a different issue (David Laight)
* tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: kmalloc_size_roundup() must not return 0 for non-zero size
mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy()
The callers of memblock_reserve() do not check the return value
presuming that memblock_reserve() always succeeds, but there are
cases where it may fail.
Having numerous memblock reservations at early boot where
memblock_can_resize is unset may exhaust the INIT_MEMBLOCK_REGIONS sized
memblock.reserved regions array and an attempt to double this array via
memblock_double_array() will fail and will return -1 to the caller.
When this happens the system crashes anyway, but it's hard to identify
the reason for the crash.
Add a panic message to memblock_double_array() to aid debugging of the
cases when too many regions are reserved before memblock can resize
memblock.reserved array.
Link: https://lore.kernel.org/linux-kernel/20230614131746.3670303-1-songshuaishuai@tinylab.org/
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/r/20230624032607.921173-1-songshuaishuai@tinylab.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
cc:stable.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZQ8hRwAKCRDdBJ7gKXxA
jlK9AQDzT/FUQV3kIshsV1IwAKFcg7gtcFSN0vs+pV+e1+4tbQD/Z2OgfGFFsCSP
X6uc2cYHc9DG5/o44iFgadW8byMssQs=
=w+St
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 10 of which pertain to post-6.5 issues. The other three
are cc:stable"
* tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: nommu: fix empty /proc/<pid>/maps
filemap: add filemap_map_order0_folio() to handle order0 folio
proc: nommu: /proc/<pid>/maps: release mmap read lock
mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement
pidfd: prevent a kernel-doc warning
argv_split: fix kernel-doc warnings
scatterlist: add missing function params to kernel-doc
selftests/proc: fixup proc-empty-vm test after KSM changes
revert "scripts/gdb/symbols: add specific ko module load command"
selftests: link libasan statically for tests with -fsanitize=address
task_work: add kerneldoc annotation for 'data' argument
mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list
sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning
-----BEGIN PGP SIGNATURE-----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=EKBZ
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix lockdep, fix a boot failure, fix some build warnings, fix document
links, and some cleanups"
* tag 'loongarch-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
docs/zh_CN/LoongArch: Update the links of ABI
docs/LoongArch: Update the links of ABI
LoongArch: Don't inline kasan_mem_to_shadow()/kasan_shadow_to_mem()
kasan: Cleanup the __HAVE_ARCH_SHADOW_MAP usage
LoongArch: Set all reserved memblocks on Node#0 at initialization
LoongArch: Remove dead code in relocate_new_kernel
LoongArch: Use _UL() and _ULL()
LoongArch: Fix some build warnings with W=1
LoongArch: Fix lockdep static memory detection
This reverts commit d48c339729.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The typical use of kmalloc_size_roundup() is:
ptr = kmalloc(sz = kmalloc_size_roundup(size), ...);
if (!ptr) return -ENOMEM.
This means it is vitally important that the returned value isn't less
than the argument even if the argument is insane.
In particular if kmalloc_slab() fails or the value is above
(MAX_ULONG - PAGE_SIZE) zero is returned and kmalloc() will return
its single zero-length buffer ZERO_SIZE_PTR.
Fix this by returning the input size if the size exceeds
KMALLOC_MAX_SIZE. kmalloc() will then return NULL as the size really is
too big.
kmalloc_slab() should not normally return NULL, unless called too early.
Again, returning zero is not the correct action as it can be in some
usage scenarios stored to a variable and only later cause kmalloc()
return ZERO_SIZE_PTR and subsequent crashes on access. Instead we can
simply stop checking the kmalloc_slab() result completely, as calling
kmalloc_size_roundup() too early would then result in an immediate crash
during boot and the developer noticing an issue in their code.
[vbabka@suse.cz: remove kmalloc_slab() result check, tweak comments and
commit log]
Fixes: 05a940656e ("slab: Introduce kmalloc_size_roundup()")
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
As Linus suggested, __HAVE_ARCH_XYZ is "stupid" and "having historical
uses of it doesn't make it good". So migrate __HAVE_ARCH_SHADOW_MAP to
separate macros named after the respective functions.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit 4b23a68f95 ("mm/page_alloc: protect PCP lists with a spinlock")
bypasses the pcplist on lock contention and returns the page directly to
the buddy list of the page's migratetype.
For pages that don't have their own pcplist, such as CMA and HIGHATOMIC,
the migratetype is temporarily updated such that the page can hitch a ride
on the MOVABLE pcplist. Their true type is later reassessed when flushing
in free_pcppages_bulk(). However, when lock contention is detected after
the type was already overridden, the bypass will then put the page on the
wrong buddy list.
Once on the MOVABLE buddy list, the page becomes eligible for fallbacks
and even stealing. In the case of HIGHATOMIC, otherwise ineligible
allocations can dip into the highatomic reserves. In the case of CMA, the
page can be lost from the CMA region permanently.
Use a separate pcpmigratetype variable for the pcplist override. Use the
original migratetype when going directly to the buddy. This fixes the bug
and should make the intentions more obvious in the code.
Originally sent here to address the HIGHATOMIC case:
https://lore.kernel.org/lkml/20230821183733.106619-4-hannes@cmpxchg.org/
Changelog updated in response to the CMA-specific bug report.
[mgorman@techsingularity.net: updated changelog]
Link: https://lkml.kernel.org/r/20230911181108.GA104295@cmpxchg.org
Fixes: 4b23a68f95 ("mm/page_alloc: protect PCP lists with a spinlock")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Joe Liu <joe.liu@mediatek.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 9 day(s) which contain
a total of 79 files changed, 5275 insertions(+), 600 deletions(-).
The main changes are:
1) Basic BTF validation in libbpf, from Andrii Nakryiko.
2) bpf_assert(), bpf_throw(), exceptions in bpf progs, from Kumar Kartikeya Dwivedi.
3) next_thread cleanups, from Oleg Nesterov.
4) Add mcpu=v4 support to arm32, from Puranjay Mohan.
5) Add support for __percpu pointers in bpf progs, from Yonghong Song.
6) Fix bpf tailcall interaction with bpf trampoline, from Leon Hwang.
7) Raise irq_work in bpf_mem_alloc while irqs are disabled to improve refill probabablity, from Hou Tao.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Andrey Konovalov, Dave Marchevsky, "Eric W. Biederman",
Jiri Olsa, Maciej Fijalkowski, Quentin Monnet, Russell King (Oracle),
Song Liu, Stanislav Fomichev, Yonghong Song
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 408579cd62 ("mm: Update do_vmi_align_munmap() return
semantics") seems to have updated one of the callers of do_vmi_munmap()
incorrectly: it used to check for the error case (which didn't
change: negative means error).
That commit changed the check to the success case (which did change:
before that commit, 0 was success, and 1 was "success and lock
downgraded". After the change, it's always 0 for success, and the lock
will have been released if requested).
This didn't change any actual VM behavior _except_ for memory accounting
when 'VM_ACCOUNT' was set on the vma. Which made the wrong return value
test fairly subtle, since everything continues to work.
Or rather - it continues to work but the "Committed memory" accounting
goes all wonky (Committed_AS value in /proc/meminfo), and depending on
settings that then causes problems much much later as the VM relies on
bogus statistics for its heuristics.
Revert that one line of the change back to the original logic.
Fixes: 408579cd62 ("mm: Update do_vmi_align_munmap() return semantics")
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Reported-bisected-and-tested-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/all/1694366957@msgid.manchmal.in-ulm.de/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We require access to this kasan helper in BPF code in the next patch
where we have to unpoison the task stack when we unwind and reset the
stack frame from bpf_throw, and it never really unpoisons the poisoned
stack slots on entry when compiler instrumentation is generated by
CONFIG_KASAN_STACK and inline instrumentation is supported.
Also, remove the declaration from mm/kasan/kasan.h as we put it in the
header file kasan.h.
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Suggested-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-10-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The function in fact searches the nearest node for a given one,
based on a N_ONLINE state. This is a common pattern to search
for a nearest node.
This patch converts numa_map_to_online_node() to numa_nearest_node()
so that others won't need to opencode the logic.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20230819141239.287290-2-yury.norov@gmail.com
Function kmem_dump_obj() will splat if passed a pointer to a non-slab
object. So nothing calls it directly, instead calling kmem_valid_obj()
first to determine whether the passed pointer to a valid slab object. This
means that merging kmem_valid_obj() into kmem_dump_obj() will make the
code more concise. Therefore, convert kmem_dump_obj() to work the same
way as vmalloc_dump_obj(), removing the need for the kmem_dump_obj()
caller to check kmem_valid_obj(). After this, there are no remaining
calls to kmem_valid_obj() anymore, and it can be safely removed.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
After the commit in Fixes:, if a module that created a slab cache does not
release all of its allocated objects before destroying the cache (at rmmod
time), we might end up releasing the kmem_cache object without removing it
from the slab_caches list thus corrupting the list as kmem_cache_destroy()
ignores the return value from shutdown_cache(), which in turn never removes
the kmem_cache object from slabs_list in case __kmem_cache_shutdown() fails
to release all of the cache's slabs.
This is easily observable on a kernel built with CONFIG_DEBUG_LIST=y
as after that ill release the system will immediately trip on list_add,
or list_del, assertions similar to the one shown below as soon as another
kmem_cache gets created, or destroyed:
[ 1041.213632] list_del corruption. next->prev should be ffff89f596fb5768, but was 52f1e5016aeee75d. (next=ffff89f595a1b268)
[ 1041.219165] ------------[ cut here ]------------
[ 1041.221517] kernel BUG at lib/list_debug.c:62!
[ 1041.223452] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 1041.225408] CPU: 2 PID: 1852 Comm: rmmod Kdump: loaded Tainted: G B W OE 6.5.0 #15
[ 1041.228244] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023
[ 1041.231212] RIP: 0010:__list_del_entry_valid+0xae/0xb0
Another quick way to trigger this issue, in a kernel with CONFIG_SLUB=y,
is to set slub_debug to poison the released objects and then just run
cat /proc/slabinfo after removing the module that leaks slab objects,
in which case the kernel will panic:
[ 50.954843] general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 [#1] PREEMPT SMP PTI
[ 50.961545] CPU: 2 PID: 1495 Comm: cat Kdump: loaded Tainted: G B W OE 6.5.0 #15
[ 50.966808] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023
[ 50.972663] RIP: 0010:get_slabinfo+0x42/0xf0
This patch fixes this issue by properly checking shutdown_cache()'s
return value before taking the kmem_cache_release() branch.
Fixes: 0495e337b7 ("mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock")
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The Itanium architecture is obsolete, and an informal survey [0] reveals
that any residual use of Itanium hardware in production is mostly HP-UX
or OpenVMS based. The use of Linux on Itanium appears to be limited to
enthusiasts that occasionally boot a fresh Linux kernel to see whether
things are still working as intended, and perhaps to churn out some
distro packages that are rarely used in practice.
None of the original companies behind Itanium still produce or support
any hardware or software for the architecture, and it is listed as
'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers
that contributed on behalf of those companies (nor anyone else, for that
matter) have been willing to support or maintain the architecture
upstream or even be responsible for applying the odd fix. The Intel
firmware team removed all IA-64 support from the Tianocore/EDK2
reference implementation of EFI in 2018. (Itanium is the original
architecture for which EFI was developed, and the way Linux supports it
deviates significantly from other architectures.) Some distros, such as
Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have
dropped support years ago.
While the argument is being made [1] that there is a 'for the common
good' angle to being able to build and run existing projects such as the
Grid Community Toolkit [2] on Itanium for interoperability testing, the
fact remains that none of those projects are known to be deployed on
Linux/ia64, and very few people actually have access to such a system in
the first place. Even if there were ways imaginable in which Linux/ia64
could be put to good use today, what matters is whether anyone is
actually doing that, and this does not appear to be the case.
There are no emulators widely available, and so boot testing Itanium is
generally infeasible for ordinary contributors. GCC still supports IA-64
but its compile farm [3] no longer has any IA-64 machines. GLIBC would
like to get rid of IA-64 [4] too because it would permit some overdue
code cleanups. In summary, the benefits to the ecosystem of having IA-64
be part of it are mostly theoretical, whereas the maintenance overhead
of keeping it supported is real.
So let's rip off the band aid, and remove the IA-64 arch code entirely.
This follows the timeline proposed by the Debian/ia64 maintainer [5],
which removes support in a controlled manner, leaving IA-64 in a known
good state in the most recent LTS release. Other projects will follow
once the kernel support is removed.
[0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/
[1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/
[2] https://gridcf.org/gct-docs/latest/index.html
[3] https://cfarm.tetaneutral.net/machines/list/
[4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/
[5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
1, Allow usage of LSX/LASX in the kernel;
2, Add SIMD-optimized RAID5/RAID6 routines;
3, Add Loongson Binary Translation (LBT) extension support;
4, Add basic KGDB & KDB support;
5, Add building with kcov coverage;
6, Add KFENCE (Kernel Electric-Fence) support;
7, Add KASAN (Kernel Address Sanitizer) support;
8, Some bug fixes and other small changes;
9, Update the default config file.
-----BEGIN PGP SIGNATURE-----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=NXy2
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Allow usage of LSX/LASX in the kernel, and use them for
SIMD-optimized RAID5/RAID6 routines
- Add Loongson Binary Translation (LBT) extension support
- Add basic KGDB & KDB support
- Add building with kcov coverage
- Add KFENCE (Kernel Electric-Fence) support
- Add KASAN (Kernel Address Sanitizer) support
- Some bug fixes and other small changes
- Update the default config file
* tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
LoongArch: Update Loongson-3 default config file
LoongArch: Add KASAN (Kernel Address Sanitizer) support
LoongArch: Simplify the processing of jumping new kernel for KASLR
kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process
kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping
LoongArch: Add KFENCE (Kernel Electric-Fence) support
LoongArch: Get partial stack information when providing regs parameter
LoongArch: mm: Add page table mapped mode support for virt_to_page()
kfence: Defer the assignment of the local variable addr
LoongArch: Allow building with kcov coverage
LoongArch: Provide kaslr_offset() to get kernel offset
LoongArch: Add basic KGDB & KDB support
LoongArch: Add Loongson Binary Translation (LBT) extension support
raid6: Add LoongArch SIMD recovery implementation
raid6: Add LoongArch SIMD syndrome calculation
LoongArch: Add SIMD-optimized XOR routines
LoongArch: Allow usage of LSX/LASX in the kernel
LoongArch: Define symbol 'fault' as a local label in fpu.S
LoongArch: Adjust {copy, clear}_user exception handler behavior
LoongArch: Use static defined zero page rather than allocated
...
LoongArch populates pmd/pud with invalid_pmd_table/invalid_pud_table in
pagetable_init, So pmd_init/pud_init(p) is required, define them as __weak
in mm/kasan/init.c, like mm/sparse-vmemmap.c.
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
MIPS, LoongArch and some other architectures have many holes between
different segments and the valid address space (256T available) is
insufficient to map all these segments to kasan shadow memory with the
common formula provided by kasan core. So we need architecture specific
mapping formulas to ensure different segments are mapped individually,
and only limited space lengths of those specific segments are mapped to
shadow.
Therefore, when the incoming address is converted to a shadow, we need
to add a condition to determine whether it is valid.
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The LoongArch architecture is different from other architectures. It
needs to update __kfence_pool during arch_kfence_init_pool().
This patch modifies the assignment location of the local variable addr
in the kfence_init_pool() function to support the case of updating
__kfence_pool in arch_kfence_init_pool().
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
which were introduced in the current merge window.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZPd5KAAKCRDdBJ7gKXxA
jqIrAPoCqnQwOA577hJ3B1iEZnbYC0dlf5Rsk+uS/2HFnVeLhAD6A0uFOIE11ZQR
I9AU7NDtu8NYkh9Adz+cRDeLNWbRSAo=
=EFfq
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-09-05-11-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Seven hotfixes. Four are cc:stable and the remainder pertain to issues
which were introduced in the current merge window"
* tag 'mm-hotfixes-stable-2023-09-05-11-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
sparc64: add missing initialization of folio in tlb_batch_add()
mm: memory-failure: use rcu lock instead of tasklist_lock when collect_procs()
revert "memfd: improve userspace warnings for missing exec-related flags".
rcu: dump vmalloc memory info safely
mm/vmalloc: add a safer version of find_vm_area() for debug
tools/mm: fix undefined reference to pthread_once
memcontrol: ensure memcg acquired by id is properly set up
Minjie Du