[ Upstream commit cee572756a ]
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
[ 289.171014] mmc1: running CQE recovery
[ 290.048972] mmc1: running CQE recovery
[ 290.054834] mmc1: running CQE recovery
[ 290.060817] mmc1: running CQE recovery
[ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
[ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
[ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
[ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
[ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
[ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
[ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
[ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
[ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
[ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
[ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
[ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
While we are here, set the eMMC maximum clock frequency to 1.5MHz to
follow the ROCK 4C+.
Fixes: 1b5715c602 ("arm64: dts: rockchip: add ROCK Pi 4 DTS support")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-By: Folker Schwesinger <dev@folker-schwesinger.de>
Link: https://lore.kernel.org/r/20230705144255.115299-2-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 798f1df86e ]
The commit 3a786086c6 ("arm64: dts: qcom: Add missing "-thermal"
suffix for thermal zones") renamed the thermal zone in the pm8150l.dtsi
file to comply with the schema. However this resulted in a clash with
the RB5 board file, which already contained the pm8150l-thermal zone for
the on-board sensor. This resulted in the board file definition
overriding the thermal zone defined in the PMIC include file (and thus
the on-die PMIC temp alarm was not probing at all).
Rename the thermal zone in qcom/qrb5165-rb5.dts to remove this override.
Fixes: 3a786086c6 ("arm64: dts: qcom: Add missing "-thermal" suffix for thermal zones")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230613131224.666668-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34539b442b ]
The am335x devices started producing boot errors for resetting musb module
in because of subtle timing changes:
Unhandled fault: external abort on non-linefetch (0x1008)
...
sysc_poll_reset_sysconfig from sysc_reset+0x109/0x12
sysc_reset from sysc_probe+0xa99/0xeb0
...
The fix is to flush posted write after enable before reset during
probe. Note that some devices also need to specify the delay after enable
with ti,sysc-delay-us, but this is not needed for musb on am335x based on
my tests.
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://storage.kernelci.org/next/master/next-20230614/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/lab-cip/baseline-beaglebone-black.html
Fixes: 596e795569 ("bus: ti-sysc: Add support for software reset")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43d00e102d ]
ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.
To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.
Fixes: fbc7b27af0 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2eb9625a3a ]
While performing certain power-off sequences, PCI drivers are
called to suspend and resume their underlying devices through
PCI PM (power management) interface. However this NIC hardware
does not support PCI PM suspend/resume operations so system wide
suspend/resume leads to bad MFW (management firmware) state which
causes various follow-up errors in driver when communicating with
the device/firmware afterwards.
To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding
system to go into suspended/standby mode.
Without this fix device/firmware does not recover unless system
is power cycled.
Fixes: 2950219d87 ("qede: Add basic network device support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d0c88e84e ]
The status of global socket memory pressure is updated when:
a) __sk_mem_raise_allocated():
enter: sk_memory_allocated(sk) > sysctl_mem[1]
leave: sk_memory_allocated(sk) <= sysctl_mem[0]
b) __sk_mem_reduce_allocated():
leave: sk_under_memory_pressure(sk) &&
sk_memory_allocated(sk) < sysctl_mem[0]
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Fixes: e1aab161e0 ("socket: initial cgroup code.")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54c9016eb8 ]
Existing comment in the source explains why we don't want efx_init_tc()
failure to be fatal. Cited commit erroneously consolidated failure
paths causing the probe to be failed in this case.
Fixes: 7e056e2360 ("sfc: obtain device mac address based on firmware handle for ef100")
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/aa7f589dd6028bd1ad49f0a85f37ab33c09b2b45.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa165e1949 ]
In efx_init_tc(), move the setting of efx->tc->up after the
flow_indr_dev_register() call, so that if it fails, efx_fini_tc()
won't call flow_indr_dev_unregister().
Fixes: 5b2e12d51b ("sfc: bind indirect blocks for TC offload on EF100")
Suggested-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/a81284d7013aba74005277bd81104e4cfbea3f6f.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e16ca7fb9f ]
When offloading a TC encap action, the action information for the
hardware might not be "ready": if there's currently no neighbour entry
available for the destination address, we can't construct the Ethernet
header to prepend to the packet. In this case, we still offload the
flow rule, but with its action-set-list ID pointing at a "fallback"
action which simply delivers the packet to its default destination (as
though no flow rule had matched), thus allowing software TC to handle
it. Later, when we receive a neighbouring update that allows us to
construct the encap header, the rule will become "ready" and we will
update its action-set-list ID in hardware to point at the actual
offloaded actions.
This patch sets up these fallback ASLs, but does not yet use them.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: fa165e1949 ("sfc: don't unregister flow_indr if it was never registered")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23d775f12d ]
If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state. When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.
Fixes: a3dcb3e7e7 ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset")
Signed-off-by: Alfred Lee <l00g33k@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34a79876d9 ]
Before this fix, running high rate traffic through XDP_REDIRECT
with multibuf could overrun the fifo used to release the
xdp frames after tx completion. This resulted in corrupted data
being consumed on the free side.
The culplirt was a miscalculation of the fifo size: the maximum ratio
between fifo entries / data segments was incorrect. This ratio serves to
calculate the max fifo size for a full sq where each packet uses the
worst case number of entries in the fifo.
This patch fixes the formula and names the constant. It also makes sure
that future values will use a power of 2 number of entries for the fifo
mask to work.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 3f734b8c59 ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f2beb8874 ]
Change "write" into the actual "read" word.
Change parameters description.
Fixes: 7073f46e44 ("i40e: Add AQ commands for NVM Update for X722")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 751969e5b1 ]
Return an error if a field's mask is neither full nor empty. When a mask
is only partial the field is not being used for rule programming but it
gives a wrong impression it is used. Fix by returning an error on any
partial mask to make it clear they are not supported.
The ip_ver assignment is moved earlier in code to allow using it in
iavf_validate_fdir_fltr_masks.
Fixes: 527691bf06 ("iavf: Support IPv4 Flow Director filters")
Fixes: e90cbc257a ("iavf: Support IPv6 Flow Director filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a552bfa16b ]
Recent changes in net-next (commit 759ab1edb5 ("net: store netdevs
in an xarray")) refactored the handling of pre-assigned ifindexes
and let syzbot surface a latent problem in ovs. ovs does not validate
ifindex, making it possible to create netdev ports with negative
ifindex values. It's easy to repro with YNL:
$ ./cli.py --spec netlink/specs/ovs_datapath.yaml \
--do new \
--json '{"upcall-pid": 1, "name":"my-dp"}'
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'
$ ip link show
-65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff
...
Validate the inputs. Now the second command correctly returns:
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'
lib.ynl.NlError: Netlink error: Numerical result out of range
nl_len = 108 (92) nl_flags = 0x300 nl_type = 2
error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'}
Accept 0 since it used to be silently ignored.
Fixes: 54c4ef34c4 ("openvswitch: allow specifying ifindex of new interfaces")
Reported-by: syzbot+7456b5dcf65111553320@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230814203840.2908710-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dafcbce071 ]
Similar to commit 01f4fd2708 ("bonding: Fix incorrect deletion of
ETH_P_8021AD protocol vid from slaves"), we can trigger BUG_ON(!vlan_info)
in unregister_vlan_dev() with the following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add team1 type team
# ip netns exec ns1 ip link add team_slave type veth peer veth2
# ip netns exec ns1 ip link set team_slave master team1
# ip netns exec ns1 ip link add link team_slave name team_slave.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link team1 name team1.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set team_slave nomaster
# ip netns del ns1
Add S-VLAN tag related features support to team driver. So the team driver
will always propagate the VLAN info to its slaves.
Fixes: 8ad227ff89 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230814032301.2804971-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 096516d092 ]
The 54810 does not support c45. The mmd_phy_indirect accesses return
arbirtary values leading to odd behavior like saying it supports EEE
when it doesn't. We also see that reading/writing these non-existent
MMD registers leads to phy instability in some cases.
Fixes: b14995ac25 ("net: phy: broadcom: Add BCM54810 PHY entry")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/1691901708-28650-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23185c6aed ]
Do not allow to insert elements from datapath to objects maps.
Fixes: 8aeff920dc ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a33d8b73d ]
Netlink event path is missing a synchronization point with GC
transactions. Add GC sequence number update to netns release path and
netlink event path, any GC transaction losing race will be discarded.
Fixes: 5f68718b34 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5310760af1 ]
When two threads run proc_do_sync_threshold() in parallel,
data races could happen between the two memcpy():
Thread-1 Thread-2
memcpy(val, valp, sizeof(val));
memcpy(valp, val, sizeof(val));
This race might mess up the (struct ctl_table *) table->data,
so we add a mutex lock to serialize them.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/B6988E90-0A1E-4B85-BF26-2DAF6D482433@gmail.com/
Signed-off-by: Sishuai Gong <sishuai.system@gmail.com>
Acked-by: Simon Horman <horms@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bfab6d23a ]
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and
SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout
value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300
msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state.
As Paolo Valerio noticed, this might cause unwanted expiration of the ct
entry. In my test, with 1s tc netem delay set on the NAT path, after the
SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND
state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is
sent back from the peer, the sctp ct entry has expired and been deleted,
and then the SHUTDOWN_ACK has to be dropped.
Also, it is confusing these two sysctl options always show 0 due to all
timeout values using sec as unit:
net.netfilter.nf_conntrack_sctp_timeout_shutdown_recd = 0
net.netfilter.nf_conntrack_sctp_timeout_shutdown_sent = 0
This patch fixes it by also using 3 secs for sctp shutdown send and recv
state in sctp conntrack, which is also RTO.initial value in SCTP protocol.
Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV
was probably used for a rare scenario where SHUTDOWN is sent on 1st path
but SHUTDOWN_ACK is replied on 2nd path, then a new connection started
immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV
to CLOSE when receiving INIT in the ORIGINAL direction.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7845914f45 ]
nftables selftests fail:
run-tests.sh testcases/sets/0044interval_overlap_0
Expected: 0-2 . 0-3, got:
W: [FAILED] ./testcases/sets/0044interval_overlap_0: got 1
Insertion must ignore duplicate but expired entries.
Moreover, there is a strange asymmetry in nft_pipapo_activate:
It refetches the current element, whereas the other ->activate callbacks
(bitmap, hash, rhash, rbtree) use elem->priv.
Same for .remove: other set implementations take elem->priv,
nft_pipapo_remove fetches elem->priv, then does a relookup,
remove this.
I suspect this was the reason for the change that prompted the
removal of the expired check in pipapo_get() in the first place,
but skipping exired elements there makes no sense to me, this helper
is used for normal get requests, insertions (duplicate check)
and deactivate callback.
In first two cases expired elements must be skipped.
For ->deactivate(), this gets called for DELSETELEM, so it
seems to me that expired elements should be skipped as well, i.e.
delete request should fail with -ENOENT error.
Fixes: 24138933b9 ("netfilter: nf_tables: don't skip expired elements during walk")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90e5b3462e ]
When flushing, individual set elements are disabled in the next
generation via the ->flush callback.
Catchall elements are not disabled. This is incorrect and may lead to
double-deactivations of catchall elements which then results in memory
leaks:
WARNING: CPU: 1 PID: 3300 at include/net/netfilter/nf_tables.h:1172 nft_map_deactivate+0x549/0x730
CPU: 1 PID: 3300 Comm: nft Not tainted 6.5.0-rc5+ #60
RIP: 0010:nft_map_deactivate+0x549/0x730
[..]
? nft_map_deactivate+0x549/0x730
nf_tables_delset+0xb66/0xeb0
(the warn is due to nft_use_dec() detecting underflow).
Fixes: aaa31047a6 ("netfilter: nftables: add catch-all set element support")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96d3c1cade ]
The encode_dma() function has some validation on in_trans->size but it
would be more clear to move those checks to find_and_map_user_pages().
The encode_dma() had two checks:
if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size)
return -EINVAL;
The in_trans->addr variable is the starting address. The in_trans->size
variable is the total size of the transfer. The transfer can occur in
parts and the resources->xferred_dma_size tracks how many bytes we have
already transferred.
This patch introduces a new variable "remaining" which represents the
amount we want to transfer (in_trans->size) minus the amount we have
already transferred (resources->xferred_dma_size).
I have modified the check for if in_trans->size is zero to instead check
if in_trans->size is less than resources->xferred_dma_size. If we have
already transferred more bytes than in_trans->size then there are negative
bytes remaining which doesn't make sense. If there are zero bytes
remaining to be copied, just return success.
The check in encode_dma() checked that "addr + size" could not overflow
and barring a driver bug that should work, but it's easier to check if
we do this in parts. First check that "in_trans->addr +
resources->xferred_dma_size" is safe. Then check that "xfer_start_addr +
remaining" is safe.
My final concern was that we are dealing with u64 values but on 32bit
systems the kmalloc() function will truncate the sizes to 32 bits. So
I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);"
and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit
systems.
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/24d3348b-25ac-4c1b-b171-9dae7c43e4e0@moroto.mountain
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d956177b7 ]
The temporary buffer storing slicing configuration data from user is only
freed on error. This is a memory leak. Free the buffer unconditionally.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802145937.14827-1-quic_jhugo@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a519a5725 ]
The failure handling procedure destroys page pools for all queues,
including those that haven't had their page pool created yet. this patch
introduces necessary adjustments to prevent potential risks and
inconsistency with the error handling behavior.
Fixes: 0ebab78cbc ("net: veth: add page_pool for page recycling")
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Link: https://lore.kernel.org/r/20230812023016.10553-1-liangchen.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 758c910781 ]
If it fails to get the devices's MAC address, octep_probe exits while
leaving the delayed work intr_poll_task queued. When the work later
runs, it's a use after free.
Move the cancelation of intr_poll_task from octep_remove into
octep_device_cleanup. This does not change anything in the octep_remove
flow, but octep_device_cleanup is called also in the octep_probe error
path, where the cancelation is needed.
Note that the cancelation of ctrl_mbox_task has to follow
intr_poll_task's, because the ctrl_mbox_task may be queued by
intr_poll_task.
Fixes: 24d4333233 ("octeon_ep: poll for control messages")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-5-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 607a7a45cd ]
intr_poll_task may queue ctrl_mbox_task. The function
octep_poll_non_ioq_interrupts_cn93_pf does this.
When removing the driver and canceling these two works, cancel
ctrl_mbox_task last to guarantee it does not run anymore.
Fixes: 24d4333233 ("octeon_ep: poll for control messages")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-4-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28458c8000 ]
tx_timeout_task is canceled too early when removing the driver. Nothing
prevents .ndo_tx_timeout from triggering and queuing the work again.
Better cancel it after the netdev is unregistered.
It's harmless for octep_tx_timeout_task to run in the window between the
unregistration and cancelation, because it checks netif_running.
Fixes: 862cd659a6 ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-3-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 519b227904 ]
The intention was to wait up to 500 ms for the mbox response.
The third argument to wait_event_interruptible_timeout() is supposed to
be the timeout duration. The driver mistakenly passed absolute time
instead.
Fixes: 577f0d1b1c ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230810150114.107765-2-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c461e394d ]
On Zynq UltraScale+ MPSoC ubuntu platform when systemctl issues suspend,
network manager bring down the interface and goes into suspend. When it
wakes up it again enables the interface.
This leads to xilinx-psgtr "PLL lock timeout" on interface bringup, as
the power management controller power down the entire FPD (including
SERDES) if none of the FPD devices are in use and serdes is not
initialized on resume.
$ sudo rtcwake -m no -s 120 -v
$ sudo systemctl suspend <this does ifconfig eth1 down>
$ ifconfig eth1 up
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-fd400000.phy.0: phy poweron failed --> -110
macb driver is called in this way:
1. macb_close: Stop network interface. In this function, it
reset MACB IP and disables PHY and network interface.
2. macb_suspend: It is called in kernel suspend flow. But because
network interface has been disabled(netif_running(ndev) is
false), it does nothing and returns directly;
3. System goes into suspend state. Some time later, system is
waken up by RTC wakeup device;
4. macb_resume: It does nothing because network interface has
been disabled;
5. macb_open: It is called to enable network interface again. ethernet
interface is initialized in this API but serdes which is power-off
by PMUFW during FPD-off suspend is not initialized again and so
we hit GT PLL lock issue on open.
To resolve this PLL timeout issue always do PS GTR initialization
when ethernet device is configured as non-wakeup source.
Fixes: f22bd29ba1 ("net: macb: Fix ZynqMP SGMII non-wakeup source resume failure")
Fixes: 8b73fa3ae0 ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1691414091-2260697-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5598c9bfdb ]
This should be done before the soft min/max frequencies are restored.
When we disable the "Ignore efficient frequency" flag, GuC does not
actually bring the requested freq down to RPn.
Specifically, this scenario-
- ignore efficient freq set to true
- reduce min to RPn (from efficient)
- suspend
- resume (includes GuC load, restore soft min/max, restore efficient freq)
- validate min freq has been resored to RPn
This will fail if we didn't first restore(disable, in this case) efficient
freq flag before setting the soft min frequency.
v2: Bring the min freq down to RPn when we disable efficient freq (Rodrigo)
Also made the change to set the min softlimit to RPn at init. Otherwise, we
were storing RPe there.
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8736
Fixes: 55f9720dbf ("drm/i915/guc/slpc: Provide sysfs for efficient freq")
Fixes: 95ccf312a1 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726010044.3280402-1-vinay.belgaumkar@intel.com
(cherry picked from commit 28e671114f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8470c0a7b ]
Commit 03e909acd9 ("drm/panel: simple: Add support for AUO G121EAN01.4
panel") added support for this panel model, but the timings it implements
are very different from what the datasheet describes. I checked both the
G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they
all have the same timings: for example the LVDS clock typical value is 74.4
MHz, not 66.7 MHz as implemented.
Replace the timings with the ones from the documentation. These timings
have been tested and the clock frequencies verified with an oscilloscope to
ensure they are correct.
Also use struct display_timing instead of struct drm_display_mode in order
to also specify the minimum and maximum values.
[0] https://embedded.avnet.com/product/g121ean01-0/
[1] https://embedded.avnet.com/product/g121ean01-4/
Fixes: 03e909acd9 ("drm/panel: simple: Add support for AUO G121EAN01.4 panel")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804151239.835216-1-luca.ceresoli@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 855067defa ]
This test verifies whether the encapsulated packets have the correct
configured TTL. It does so by sending ICMP packets through the test
topology and mirroring them to a gretap netdevice. On a busy host
however, more than just the test ICMP packets may end up flowing
through the topology, get mirrored, and counted. This leads to
potential spurious failures as the test observes much more mirrored
packets than the sent test packets, and assumes a bug.
Fix this by tightening up the mirror action match. Change it from
matchall to a flower classifier matching on ICMP packets specifically.
Fixes: 45315673e0 ("selftests: forwarding: Test changes in mirror-to-gretap")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc941e548b ]
Uwe reports:
"Most PHYs signal WoL using an interrupt. So disabling interrupts [at
shutdown] breaks WoL at least on PHYs covered by the marvell driver."
Discussing with Ioana, the problem which was trying to be solved was:
"The board in question is a LS1021ATSN which has two AR8031 PHYs that
share an interrupt line. In case only one of the PHYs is probed and
there are pending interrupts on the PHY#2 an IRQ storm will happen
since there is no entity to clear the interrupt from PHY#2's registers.
PHY#1's driver will get stuck in .handle_interrupt() indefinitely."
Further confirmation that "the two AR8031 PHYs are on the same MDIO
bus."
With WoL using interrupts to wake the system, in such a case, the
system will begin booting with an asserted interrupt. Thus, we need to
cope with an interrupt asserted during boot.
Solve this instead by disabling interrupts during PHY probe. This will
ensure in Ioana's situation that both PHYs of the same type sharing an
interrupt line on a common MDIO bus will have their interrupt outputs
disabled when the driver probes the device, but before we hook in any
interrupt handlers - thus avoiding the interrupt storm.
A better fix would be for platform firmware to disable the interrupting
devices at source during boot, before control is handed to the kernel.
Fixes: e2f016cf77 ("net: phy: add a shutdown procedure")
Link: 20230804071757.383971-1-u.kleine-koenig@pengutronix.de
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 829c6524d6 ]
The reference of pdev->dev is taken by of_find_device_by_node, so
it should be released when not need anymore.
Fixes: 7dc54d3b8d ("net: pcs: add Renesas MII converter driver")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51b813176f ]
Commit 25266128fe ("virtio-net: fix race between set queues and
probe") tries to fix the race between set queues and probe by calling
_virtnet_set_queues() before DRIVER_OK is set. This violates virtio
spec. Fixing this by setting queues after virtio_device_ready().
Note that rtnl needs to be held for userspace requests to change the
number of queues. So we are serialized in this way.
Fixes: 25266128fe ("virtio-net: fix race between set queues and probe")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3ec2b5d87 ]
In destruction flow, the assignment of NULL to xso->dev
caused to skip of xfrm_dev_state_free() call, which was
called in xfrm_state_put(to_put) routine.
Instead of open-coded variant of xfrm_dev_state_delete() and
xfrm_dev_state_free(), let's use them directly.
Fixes: f8a70afafc ("xfrm: add TX datapath support for IPsec packet offload mode")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 982c3aca8b ]
The policy memory was released but not HW driver data. Add
call to xfrm_dev_policy_delete(), so drivers will have a chance
to release their resources.
Fixes: 919e43fad5 ("xfrm: add an interface to offload policy")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e2424708d ]
The previous commit 4e484b3e96 ("xfrm: rate limit SA mapping change
message to user space") added one additional attribute named
XFRMA_MTIMER_THRESH and described its type at compat_policy
(net/xfrm/xfrm_compat.c).
However, the author forgot to also describe the nla_policy at
xfrma_policy (net/xfrm/xfrm_user.c). Hence, this suppose NLA_U32 (4
bytes) value can be faked as empty (0 bytes) by a malicious user, which
leads to 4 bytes overflow read and heap information leak when parsing
nlattrs.
To exploit this, one malicious user can spray the SLUB objects and then
leverage this 4 bytes OOB read to leak the heap data into
x->mapping_maxage (see xfrm_update_ae_params(...)), and leak it to
userspace via copy_to_user_state_extra(...).
The above bug is assigned CVE-2023-3773. To fix it, this commit just
completes the nla_policy description for XFRMA_MTIMER_THRESH, which
enforces the length check and avoids such OOB read.
Fixes: 4e484b3e96 ("xfrm: rate limit SA mapping change message to user space")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6018a26627 ]
When ip_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ip_vti device sends IPv6 packets.
As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fd41f1ba6 ]
When ipv6_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ipv6_vti device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
vti6_tnl_xmit+0x3e6/0x1ee0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
Allocated by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
netlink_sendmsg+0x9b1/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x40
____kasan_slab_free+0x160/0x1c0
slab_free_freelist_hook+0x11b/0x220
kmem_cache_free+0xf0/0x490
skb_free_head+0x17f/0x1b0
skb_release_data+0x59c/0x850
consume_skb+0xd2/0x170
netlink_unicast+0x54f/0x7f0
netlink_sendmsg+0x926/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff88802e08ed00
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 194 bytes inside of
freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80)
As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53223f2ed1 ]
When the xfrm device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when the xfrm device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff8881111458ef by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
xfrmi_xmit+0x173/0x1ca0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:intel_idle_hlt+0x23/0x30
Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4
RSP: 0018:ffffc90000197d78 EFLAGS: 00000246
RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5
RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50
RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d
R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000
cpuidle_enter_state+0xd3/0x6f0
cpuidle_enter+0x4e/0xa0
do_idle+0x2fe/0x3c0
cpu_startup_entry+0x18/0x20
start_secondary+0x200/0x290
secondary_startup_64_no_verify+0x167/0x16b
</TASK>
Allocated by task 939:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
inet6_ifa_notify+0x118/0x230
__ipv6_ifa_notify+0x177/0xbe0
addrconf_dad_completed+0x133/0xe00
addrconf_dad_work+0x764/0x1390
process_one_work+0xa32/0x16f0
worker_thread+0x67d/0x10c0
kthread+0x344/0x440
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888111145800
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 239 bytes inside of
freed 640-byte region [ffff888111145800, ffff888111145a80)
As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57010b8ece ]
After the elimination of inner modes, a couple of warnings that
were previously unreachable can now be triggered by malformed
inbound packets.
Fix this by:
1. Moving the setting of skb->protocol into the decap functions.
2. Returning -EINVAL when unexpected protocol is seen.
Reported-by: Maciej Żenczykowski<maze@google.com>
Fixes: 5f24f41e8e ("xfrm: Remove inner/outer modes from input path")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1e0e61d61 ]
According to all consumers code of attrs[XFRMA_SEC_CTX], like
* verify_sec_ctx_len(), convert to xfrm_user_sec_ctx*
* xfrm_state_construct(), call security_xfrm_state_alloc whose prototype
is int security_xfrm_state_alloc(.., struct xfrm_user_sec_ctx *sec_ctx);
* copy_from_user_sec_ctx(), convert to xfrm_user_sec_ctx *
...
It seems that the expected parsing result for XFRMA_SEC_CTX should be
structure xfrm_user_sec_ctx, and the current xfrm_sec_ctx is confusing
and misleading (Luckily, they happen to have same size 8 bytes).
This commit amend the policy structure to xfrm_user_sec_ctx to avoid
ambiguity.
Fixes: cf5cb79f69 ("[XFRM] netlink: Establish an attribute policy")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75065a8929 ]
When running xfrm_state_walk_init(), the xfrm_address_filter being used
is okay to have a splen/dplen that equals to sizeof(xfrm_address_t)<<3.
This commit replaces >= to > to make sure the boundary checking is
correct.
Fixes: 37bd22420f ("af_key: pfkey_dump needs parameter validation")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christopher Obbard