Check for ethtool_ops structures that are only stored in the ethtool_ops
field of a net_device structure or passed as the second argument to
netdev_set_default_ethtool_ops. These contexts are declared const, so
ethtool_ops structures that have these properties can be declared as const
also.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct ethtool_ops i@p = { ... };
@ok1@
identifier r.i;
struct net_device e;
position p;
@@
e.ethtool_ops = &i@p;
@ok2@
identifier r.i;
expression e;
position p;
@@
netdev_set_default_ethtool_ops(e, &i@p)
@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct ethtool_ops i = { ... };
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes multiple switch-case statements
with a new macro. The macro will generate the
corresponding bit mask based on the key index
received as input.
Chances since v1:
Corrected patch title
Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes duplicate code in p80211req_mibset_mibget()
by adding p80211req_handle_action() function.
Changes since v1:
Removed prototype of p80211req_handle_action() from the prototype
list and add directly the function definition.
Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch improves code from p80211req_mibset_mibget() function by
taking into account that every
DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKeyX with
X in {0, 1, 2, 3} is a bit mask where the (P80211DID_MASK_ITEM <<
P80211DID_LSB_ITEM) mask aka 0x0x0003f000 mask keeps bits representing
the DID item number. To get this item number use P80211DID_ITEM().
Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trivial fix to spelling mistake in dev_dbg message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning for trailing */ on a separate line
Remove '+' postfix and '-' prefix from the start and end of block comments
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning for trailing */ on a separate line
Remove '+' postfix and '-' prefix from the start and end of block comments
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a minor checkpatch warnings:
"WARNING: Block comments use a trailing */ on a separate line"
Signed-off-by: Ming-Chia Chung <Quexint@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The semaphore 'lock' in 'pwrctrl_priv' is used as a simple mutex, so it
should be written as one. Semaphores are going away in the future.
_enter_pwrlock was using down_interruptible(), so the lock could be broken
by sending a signal. This could be a bug, because nothing checks the return
code here. Hence, using mutex_lock instead of the interruptible version.
Removing the now unused _enter_pwrlock and _down_sema.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning about "Alignment should match open parenthesis".
Signed-off-by: Didik Setiawan <ds@didiksetiawan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the function ion_handle_buffer since it is not used anywhere.
Signed-off-by: Johanna Abrahamsson <johanna@mjao.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not necessary to save the return value of kref_put since it is directly
returned.
Signed-off-by: Johanna Abrahamsson <johanna@mjao.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes remaining checkpatch.pl "Alignment should match open
parenthesis" issues.
Signed-off-by: Ben LeMasurier <ben@crypt.ly>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alignment should match open parenthesis as per checkpatch.pl.
Signed-off-by: Johanna Abrahamsson <johanna@mjao.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not neccessary to save the value of ion_handle_validate since it
is only used once.
Signed-off-by: Johanna Abrahamsson <johanna@mjao.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ion_free_nolock() function should not BUG on a handle client mismatch.
Signed-off-by: Johanna Abrahamsson <johanna@mjao.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
trivial fix to spelling mistake in dev_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for ethtool_ops structures that are only stored in the ethtool_ops
field of a net_device structure or passed as the second argument to
netdev_set_default_ethtool_ops. These contexts are declared const, so
ethtool_ops structures that have these properties can be declared as const
also.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct ethtool_ops i@p = { ... };
@ok1@
identifier r.i;
struct net_device e;
position p;
@@
e.ethtool_ops = &i@p;
@ok2@
identifier r.i;
expression e;
position p;
@@
netdev_set_default_ethtool_ops(e, &i@p)
@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct ethtool_ops i = { ... };
// </smpl>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
%ul definitely was supposed to be %lu in the format string,
so we print long unsigned int value, not just unsigned int
with a letter l added at the end.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lmv_proc_target_fops, of type struct file_operations, is never modified, so
declare it as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sops, of type struct seq_operations, is never modified, so declare it as
const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lprocfs_generic_fops, of type struct file_operations, is never modified, so
declare it as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
obd_psdev_fops, of type struct file_operations, is never modified, so
declare it as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a code cleanup, we get a harmless warning about a variable
that is unused when CONFIG_FS_POSIX_ACL is disabled:
drivers/staging/lustre/lustre/llite/xattr.c: In function 'll_xattr_get_common':
drivers/staging/lustre/lustre/llite/xattr.c:312:24: error: unused variable 'lli' [-Werror=unused-variable]
This puts the variable declaration into the same #ifdef.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 1e1f9ff406 ("staging: lustre: llite: break ll_getxattr_common into 2 functions")
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A patch to change to page accounting code (in v4.8-rc1) conflicts with
a change to lustre (in staging-next for v4.9), and fortunately gets
detected using a gcc warning:
In file included from /git/arm-soc/include/linux/mm.h:1001:0,
from /git/arm-soc/include/linux/highmem.h:7,
from /git/arm-soc/drivers/staging/lustre/lustre/osc/../../include/linux/libcfs/linux/libcfs.h:46,
from /git/arm-soc/drivers/staging/lustre/lustre/osc/../../include/linux/libcfs/libcfs.h:36,
from /git/arm-soc/drivers/staging/lustre/lustre/osc/osc_cl_internal.h:45,
from /git/arm-soc/drivers/staging/lustre/lustre/osc/osc_page.c:40:
drivers/staging/lustre/lustre/osc/osc_page.c: In function 'unstable_page_accounting':
include/linux/vmstat.h:117:2: error: array subscript is above array bounds [-Werror=array-bounds]
atomic_long_add(x, &vm_zone_stat[item]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/vmstat.h:117:2: error: array subscript is above array bounds [-Werror=array-bounds]
atomic_long_add(x, &vm_zone_stat[item]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This changes the function to use the correct interface for accounting in the
"node" rather than the "zone".
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d806f30e63 ("staging: lustre: osc: revise unstable pages accounting")
Fixes: 11fb998986 ("mm: move most file-based accounting to the node")
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently it is not possible to send LNet traffic between
two nodes using infiniband hardware that have different
page sizes for the case when RDMA fragments are used.
When two nodes establish a connection they tell the other
node the maximum number of RDMA fragments they support.
The issue is that the units are pages, and 256 64K pages
corresponds to 16MB of data, whereas a 4K page system is
limited to messages with 1MB of data. The solution is to
report over the wire the maximum number of fragments in
4K unites regardless of the native page size. The recipient
then uses its native page size to translate into the
maximum number of pages sized fragments it can send to
the other node.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-on: http://review.whamcloud.com/21304
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7650
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In lustre_fill_super() if lustre_start_mgc() fails then call
lustre_common_put_super() to release a reference on the MGC device
attached to the LSI.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/20851
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8297
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ll_find_alias is responsible for getting alias for inode
which can be reused. Directories are assumed to have unique
alias, where in case of non-directories there can be multiple
aliases. In case of lustre there can be two type of aliases
i.e. discon_alias and invalid_alias. Usage of discon_alias in
case of non-directories may corrupt dcache and leads to kernel
crash. Changes made to avoid use of discon_alias in case of
non-directories.
Seagate-bug-id: MRP-2739, MRP-3601
Signed-off-by: Lokesh Nagappa Jaliminche <lokesh.jaliminche@seagate.com>
Reviewed-by: Ujjwal Lanjewar <ujjwal.lanjewar@seagate.com>
Reviewed-by: Ashish Purkar <ashish.purkar@seagate.com>
Reviewed-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Tested-by: Parinay Vijayprakash Kondekar <parinay.kondekar@seagate.com>
Reviewed-on: http://review.whamcloud.com/17732
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7613
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove useless LASSERT(vma->vm_file) because of if it's NULL it
will crash early in file_inode(vma->vm_file).
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/21171
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8372
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value is ignored in client_common_fill_super.
Restore to check it and error out.
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-on: http://review.whamcloud.com/21125
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8360
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch removes find_cbdata callbacks and clear_nlink
from dentry_iput path, since this piece of code makes
a few races possible.
The test case reproduces one of the possible races
described in LU-7925:
1) two hard links are created for the same file
2) the test calls stat(2) for link #1
3) in the middle of 2) the test opens and closes link #2
4) in the middle of 2) the test drops the ldlm locks and
forces dentry reclaim via vm.drop_caches=2
5) in the middle of 2) ll_d_iput() clears i_nlink for
the inode
6) the initial stat(2) continues and copies the wrong
i_nlink value into st_nlink
Signed-off-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Seagate-bug-id: MRP-3271
Reviewed-on: http://review.whamcloud.com/19164
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7925
Reviewed-by: Wally Wang <wang@cray.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Assertion was happened for open request when rq_replay is set
to 1.
ASSERTION(mod->mod_open_req->rq_replay == 0)
But this situation is not fatal for client, and could happened
when mdc_close() failed.
The fix allow to free such requests. If mdc_close fail, MDS doesn`t
receive close request from client. And in a worst case client would
be evicted.
The test recreates issue when mdc_close failed and
client asserts:
ASSERTION( mod->mod_open_req->rq_replay == 0 ) failed
Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Seagate-bug-id: MRP-3156
Reviewed-on: http://review.whamcloud.com/17495
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5282
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dgnc_maxcps_room() function must be called only for print device.
The if-statement for checking print device checks before calling
dgnc_maxcps_room() and also this function doesn't need to have any
data except channel_t.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpath.pl warning:
trailing statements should be on next line
open brace '{' following function declarations go on the next line
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sparse was warning about incorrect type of argument:
drivers/staging/i4l/icn/icn.c:1048:49: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/i4l/icn/icn.c:1048:49: expected void const [noderef] <asn:1>*from
drivers/staging/i4l/icn/icn.c:1048:49: got unsigned char const [usertype] *buf
drivers/staging/i4l/icn/icn.c:1476:38: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/i4l/icn/icn.c:1476:38: expected unsigned char const [usertype] *buf
drivers/staging/i4l/icn/icn.c:1476:38: got unsigned char const [noderef] [usertype] <asn:1>*buf
The function icn_writecmd() was used to copy from userspace and also
from the kernelspace. Add another argument to the function to have two
separate pointers, one for the userspace and one for the kernelspace.
Based on the value of user as passed from the caller we use one of
the two pointers.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Blank lines are not needed after starting brace or before a closing
brace.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need provide a space after a typecast.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro EVAL_PLCI and MAKE_PLCI are not being used. Remove them.
But keep the comment preceding them as it contains information
regarding message format.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro EVAL_NCCI was only being used in capi.c and the argument
controller was not used. Remove the argument and at the same time
remove the variable which now becomes unused.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Its better to use memdup_user which does the same thing which this
code has implemented. Also removed a related warning as we will be
warned if allocation fails.
Suggested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning for line over 80 characters
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The module name in the Makefile and in the driver source file is
octeon-hcd, so correct the Kconfig text to be the same.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device support
* ak8974
- New driver and bindings for this 2009 vintage magnetometer (it was very
popular back then!)
* atlas-ph-sensor
- ORP sensor support(I had to look up what one of these was)
* cio-dac
- New driver for Measurement Computing DAC boards
* dmard06
- New driver for Domintech DMARDO6 accelerometer. Also vendor prefix.
* dmard09
- New driver for Domintech DMARD09 accelerometer.
* maxim-thermocouple
- max6675 and max31855 new driver
* mt6577 auxdac
- new driver for this Mediatek chip mt2701, mt6577 and mt8173 have this
hardware.
* ti-adc161s626
- new driver for this TI single channel differential ADC.
* vcnl4000
- support vcnl4010 and vcnl4020 which are compatible for all features
currently supported by this driver.
New features
* Core
- Allow retrieving of underlying iio_dev from a callback buffer handle.
This is needed to allow client drivers to perform operations such as
configuring the trigger used.
* hid-sensors
- asynchronous resume support to avoid really long resume times.
* kxcjk-1013
- add the mysterious KIOX000A ACPI id seen in the wild.
* Tools
- lsiio now enumerates processed as well as raw channels.
Cleanup
* ad7298
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* ad7793
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* ade7854
- checkpatch fixups (alignment of parameters)
* atlas-ph-sensor
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
- Switch to REGCACHE_NONE as there are no useful register to cache.
* bma180
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* hdc100x
- Add mention of the HDC1000 and HDC1008 to the Kconfig help text.
* isl29018
- Add driver specific prefixes to defines and function names.
- Remove excessive logging.
- Drop newlines which add nothing to readability.
- General tidying up of comments.
- Drop I2C_CLASS_HWMON as irrelevant to driver.
* isl29028
- Add driver specific prefixes to defines, enums and function names.
- Drop comma's from available attribute output as not ABI compliant.
- Drop I2C_CLASS_HWMON as irrelevant to driver.
* kxsd9
- devicetree bindings.
* mag3110
- This one wasn't locking to protect against mode switches during
raw_reads. Use the iio_claim_direct_mode function to fix this buglet.
* maxim-theromcouple
- Fix missing selects for triggered buffer support in Kconfig.
* nau7802
- Use complete instead of complete_all as only one completion at a time.
* sx9500
- Use complete instead of complete_all as only one completion at a time.
* us5182d
- Add a missing error code asignment instead of checking the result of
an already checked statement.
* vcnl4000
- Use BIT macro where appropriate.
- Refactor return codes in read_raw callback.
- Add some missing locking for concurrent accesses to the device.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=d6Kh
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.9a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-testing
Jonathan writes:
First round of new features, device support and cleanups for IIO in the 4.9 cycle.
Device support
* ak8974
- New driver and bindings for this 2009 vintage magnetometer (it was very
popular back then!)
* atlas-ph-sensor
- ORP sensor support(I had to look up what one of these was)
* cio-dac
- New driver for Measurement Computing DAC boards
* dmard06
- New driver for Domintech DMARDO6 accelerometer. Also vendor prefix.
* dmard09
- New driver for Domintech DMARD09 accelerometer.
* maxim-thermocouple
- max6675 and max31855 new driver
* mt6577 auxdac
- new driver for this Mediatek chip mt2701, mt6577 and mt8173 have this
hardware.
* ti-adc161s626
- new driver for this TI single channel differential ADC.
* vcnl4000
- support vcnl4010 and vcnl4020 which are compatible for all features
currently supported by this driver.
New features
* Core
- Allow retrieving of underlying iio_dev from a callback buffer handle.
This is needed to allow client drivers to perform operations such as
configuring the trigger used.
* hid-sensors
- asynchronous resume support to avoid really long resume times.
* kxcjk-1013
- add the mysterious KIOX000A ACPI id seen in the wild.
* Tools
- lsiio now enumerates processed as well as raw channels.
Cleanup
* ad7298
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* ad7793
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* ade7854
- checkpatch fixups (alignment of parameters)
* atlas-ph-sensor
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
- Switch to REGCACHE_NONE as there are no useful register to cache.
* bma180
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* hdc100x
- Add mention of the HDC1000 and HDC1008 to the Kconfig help text.
* isl29018
- Add driver specific prefixes to defines and function names.
- Remove excessive logging.
- Drop newlines which add nothing to readability.
- General tidying up of comments.
- Drop I2C_CLASS_HWMON as irrelevant to driver.
* isl29028
- Add driver specific prefixes to defines, enums and function names.
- Drop comma's from available attribute output as not ABI compliant.
- Drop I2C_CLASS_HWMON as irrelevant to driver.
* kxsd9
- devicetree bindings.
* mag3110
- This one wasn't locking to protect against mode switches during
raw_reads. Use the iio_claim_direct_mode function to fix this buglet.
* maxim-theromcouple
- Fix missing selects for triggered buffer support in Kconfig.
* nau7802
- Use complete instead of complete_all as only one completion at a time.
* sx9500
- Use complete instead of complete_all as only one completion at a time.
* us5182d
- Add a missing error code asignment instead of checking the result of
an already checked statement.
* vcnl4000
- Use BIT macro where appropriate.
- Refactor return codes in read_raw callback.
- Add some missing locking for concurrent accesses to the device.
This patch is needed to clean up the initialized ida structure in case
the function exits with an exception.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function mdc_adjust_dirpages is only called on platforms which
don't have pages 4K in size which is why kbuild only reported this
for platforms like the Alpha. The problem was a typo in ordering of
variables in the beginning of a while loop. We were accessing the
dp pointer before it was kmapped.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cp_error member is not really set anywhere, so kill
it and the only printing user of it too.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
