With latest llvm19, I hit the following selftest failures with
$ ./test_progs -j
libbpf: prog 'on_event': BPF program load failed: Permission denied
libbpf: prog 'on_event': -- BEGIN PROG LOAD LOG --
combined stack size of 4 calls is 544. Too large
verification time 1344153 usec
stack depth 24+440+0+32
processed 51008 insns (limit 1000000) max_states_per_insn 19 total_states 1467 peak_states 303 mark_read 146
-- END PROG LOAD LOG --
libbpf: prog 'on_event': failed to load: -13
libbpf: failed to load object 'strobemeta_subprogs.bpf.o'
scale_test:FAIL:expect_success unexpected error: -13 (errno 13)
#498 verif_scale_strobemeta_subprogs:FAIL
The verifier complains too big of the combined stack size (544 bytes) which
exceeds the maximum stack limit 512. This is a regression from llvm19 ([1]).
In the above error log, the original stack depth is 24+440+0+32.
To satisfy interpreter's need, in verifier the stack depth is adjusted to
32+448+32+32=544 which exceeds 512, hence the error. The same adjusted
stack size is also used for jit case.
But the jitted codes could use smaller stack size.
$ egrep -r stack_depth | grep round_up
arm64/net/bpf_jit_comp.c: ctx->stack_size = round_up(prog->aux->stack_depth, 16);
loongarch/net/bpf_jit.c: bpf_stack_adjust = round_up(ctx->prog->aux->stack_depth, 16);
powerpc/net/bpf_jit_comp.c: cgctx.stack_size = round_up(fp->aux->stack_depth, 16);
riscv/net/bpf_jit_comp32.c: round_up(ctx->prog->aux->stack_depth, STACK_ALIGN);
riscv/net/bpf_jit_comp64.c: bpf_stack_adjust = round_up(ctx->prog->aux->stack_depth, 16);
s390/net/bpf_jit_comp.c: u32 stack_depth = round_up(fp->aux->stack_depth, 8);
sparc/net/bpf_jit_comp_64.c: stack_needed += round_up(stack_depth, 16);
x86/net/bpf_jit_comp.c: EMIT3_off32(0x48, 0x81, 0xEC, round_up(stack_depth, 8));
x86/net/bpf_jit_comp.c: int tcc_off = -4 - round_up(stack_depth, 8);
x86/net/bpf_jit_comp.c: round_up(stack_depth, 8));
x86/net/bpf_jit_comp.c: int tcc_off = -4 - round_up(stack_depth, 8);
x86/net/bpf_jit_comp.c: EMIT3_off32(0x48, 0x81, 0xC4, round_up(stack_depth, 8));
In the above, STACK_ALIGN in riscv/net/bpf_jit_comp32.c is defined as 16.
So stack is aligned in either 8 or 16, x86/s390 having 8-byte stack alignment and
the rest having 16-byte alignment.
This patch calculates total stack depth based on 16-byte alignment if jit is requested.
For the above failing case, the new stack size will be 32+448+0+32=512 and no verification
failure. llvm19 regression will be discussed separately in llvm upstream.
The verifier change caused three test failures as these tests compared messages
with stack size. More specifically,
- test_global_funcs/global_func1: fail with interpreter mode and success with jit mode.
Adjusted stack sizes so both jit and interpreter modes will fail.
- async_stack_depth/{pseudo_call_check, async_call_root_check}: since jit and interpreter
will calculate different stack sizes, the failure msg is adjusted to omit those
specific stack size numbers.
[1] https://lore.kernel.org/bpf/32bde0f0-1881-46c9-931a-673be566c61d@linux.dev/
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240214232951.4113094-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - regressions:
- af_unix: fix task hung while purging oob_skb in GC
- pds_core: do not try to run health-thread in VF path
Current release - new code bugs:
- sched: act_mirred: don't zero blockid when net device is being deleted
Previous releases - regressions:
- netfilter:
- nat: restore default DNAT behavior
- nf_tables: fix bidirectional offload, broken when unidirectional
offload support was added
- openvswitch: limit the number of recursions from action sets
- eth: i40e: do not allow untrusted VF to remove administratively
set MAC address
Previous releases - always broken:
- tls: fix races and bugs in use of async crypto
- mptcp: prevent data races on some of the main socket fields,
fix races in fastopen handling
- dpll: fix possible deadlock during netlink dump operation
- dsa: lan966x: fix crash when adding interface under a lag
when some of the ports are disabled
- can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
Misc:
- handful of fixes and reliability improvements for selftests
- fix sysfs documentation missing net/ in paths
- finish the work of squashing the missing MODULE_DESCRIPTION()
warnings in networking
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YRod
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, wireless and netfilter.
Current release - regressions:
- af_unix: fix task hung while purging oob_skb in GC
- pds_core: do not try to run health-thread in VF path
Current release - new code bugs:
- sched: act_mirred: don't zero blockid when net device is being
deleted
Previous releases - regressions:
- netfilter:
- nat: restore default DNAT behavior
- nf_tables: fix bidirectional offload, broken when unidirectional
offload support was added
- openvswitch: limit the number of recursions from action sets
- eth: i40e: do not allow untrusted VF to remove administratively set
MAC address
Previous releases - always broken:
- tls: fix races and bugs in use of async crypto
- mptcp: prevent data races on some of the main socket fields, fix
races in fastopen handling
- dpll: fix possible deadlock during netlink dump operation
- dsa: lan966x: fix crash when adding interface under a lag when some
of the ports are disabled
- can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
Misc:
- a handful of fixes and reliability improvements for selftests
- fix sysfs documentation missing net/ in paths
- finish the work of squashing the missing MODULE_DESCRIPTION()
warnings in networking"
* tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
net: fill in MODULE_DESCRIPTION()s for missing arcnet
net: fill in MODULE_DESCRIPTION()s for mdio_devres
net: fill in MODULE_DESCRIPTION()s for ppp
net: fill in MODULE_DESCRIPTION()s for fddik/skfp
net: fill in MODULE_DESCRIPTION()s for plip
net: fill in MODULE_DESCRIPTION()s for ieee802154/fakelb
net: fill in MODULE_DESCRIPTION()s for xen-netback
net: ravb: Count packets instead of descriptors in GbEth RX path
pppoe: Fix memory leak in pppoe_sendmsg()
net: sctp: fix skb leak in sctp_inq_free()
net: bcmasp: Handle RX buffer allocation failure
net-timestamp: make sk_tskey more predictable in error path
selftests: tls: increase the wait in poll_partial_rec_async
ice: Add check for lport extraction to LAG init
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
igc: Remove temporary workaround
igb: Fix string truncation warnings in igb_set_fw_version
can: netlink: Fix TDCO calculation using the old data bittiming
...
- Improve devlink dependency parsing for DT graphs
- Fix devlink handling of io-channels dependencies
- Fix PCI addressing in marvell,prestera example
- A few schema fixes for property constraints
- Improve performance of DT unprobed devices kselftest
- Fix regression in DT_SCHEMA_FILES handling
- Fix compile error in unittest for !OF_DYNAMIC
-----BEGIN PGP SIGNATURE-----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=NqMr
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Improve devlink dependency parsing for DT graphs
- Fix devlink handling of io-channels dependencies
- Fix PCI addressing in marvell,prestera example
- A few schema fixes for property constraints
- Improve performance of DT unprobed devices kselftest
- Fix regression in DT_SCHEMA_FILES handling
- Fix compile error in unittest for !OF_DYNAMIC
* tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg"
of: property: Add in-ports/out-ports support to of_graph_get_port_parent()
of: property: Improve finding the supplier of a remote-endpoint property
of: property: Improve finding the consumer of a remote-endpoint property
net: marvell,prestera: Fix example PCI bus addressing
of: unittest: Fix compile in the non-dynamic case
of: property: fix typo in io-channels
dt-bindings: tpm: Drop type from "resets"
dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints
dt-bindings: xilinx: replace Piyush Mehta maintainership
kselftest: dt: Stop relying on dirname to improve performance
dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory
Test runners on debug kernels occasionally fail with:
# # RUN tls_err.13_aes_gcm.poll_partial_rec_async ...
# # tls.c:1883:poll_partial_rec_async:Expected poll(&pfd, 1, 5) (0) == 1 (1)
# # tls.c:1870:poll_partial_rec_async:Expected status (256) == 0 (0)
# # poll_partial_rec_async: Test failed at step #17
# # FAIL tls_err.13_aes_gcm.poll_partial_rec_async
# not ok 699 tls_err.13_aes_gcm.poll_partial_rec_async
# # FAILED: 698 / 699 tests passed.
This points to the second poll() in the test which is expected
to wait for the sender to send the rest of the data.
Apparently under some conditions that doesn't happen within 5ms,
bump the timeout to 20ms.
Fixes: 23fcb62bc1 ("selftests: tls: add tests for poll behavior")
Link: https://lore.kernel.org/r/20240213142055.395564-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZczJSxAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSHrMBAOfb5uIFGpf7JNlmpDp42y2wD19hxAtv9eWr
ZcJecmhMAQCWAMDfl2D3HxSMQ40QIPGSPr+lMhTvnBa8UoXEpqCUDQ==
=7nhu
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock test fixes from Mickaël Salaün:
"Fix build issues for tests, and improve test compatibility"
* tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix capability for net_test
selftests/landlock: Fix fs_test build with old libc
selftests/landlock: Fix net_test build with old libc
In some situations, if you fail to zero-initialize the
bpf_{prog,map,btf,link}_info structs supplied to the set of LIBBPF
helpers bpf_{prog,map,btf,link}_get_info_by_fd(), you can expect the
helper to return an error. This can possibly leave people in a
situation where they're scratching their heads for an unnnecessary
amount of time. Make an explicit remark about the requirement of
zero-initializing the supplied bpf_{prog,map,btf,link}_info structs
for the respective LIBBPF helpers.
Internally, LIBBPF helpers bpf_{prog,map,btf,link}_get_info_by_fd()
call into bpf_obj_get_info_by_fd() where the bpf(2)
BPF_OBJ_GET_INFO_BY_FD command is used. This specific command is
effectively backed by restrictions enforced by the
bpf_check_uarg_tail_zero() helper. This function ensures that if the
size of the supplied bpf_{prog,map,btf,link}_info structs are larger
than what the kernel can handle, trailing bits are zeroed. This can be
a problem when compiling against UAPI headers that don't necessarily
match the sizes of the same underlying types known to the kernel.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/ZcyEb8x4VbhieWsL@google.com
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build failures when
compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails with an
error code other than ENOENT (a Hyper-V selftest bug resulted in an EMFILE,
and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could be left
pending across multiple runs, resulting in incorrect synchronization between
the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix false
positives due to the number of mappings for memslot 0 (used for code and
data that is NOT being dirty logged) changing, e.g. due to NUMA balancing.
- Have KVM's gtod_is_based_on_tsc() return "bool" instead of an "int" (the
function generates boolean values, and all callers treat the return value as
a bool).
-----BEGIN PGP SIGNATURE-----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=infW
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.8-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM selftests fixes/cleanups (and one KVM x86 cleanup) for 6.8:
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build failures when
compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails with an
error code other than ENOENT (a Hyper-V selftest bug resulted in an EMFILE,
and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could be left
pending across multiple runs, resulting in incorrect synchronization between
the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix false
positives due to the number of mappings for memslot 0 (used for code and
data that is NOT being dirty logged) changing, e.g. due to NUMA balancing.
- Have KVM's gtod_is_based_on_tsc() return "bool" instead of an "int" (the
function generates boolean values, and all callers treat the return value as
a bool).
As BPF applications grow in size and complexity and are separated into
multiple .bpf.c files that are statically linked together, it becomes
harder and harder to match verifier's BPF assembly level output to
original C code. While often annotated C source code is unique enough to
be able to identify the file it belongs to, quite often this is actually
problematic as parts of source code can be quite generic.
Long story short, it is very useful to see source code file name and
line number information along with the original C code. Verifier already
knows this information, we just need to output it.
This patch extends verifier log with file name and line number
information, emitted next to original (presumably C) source code,
annotating BPF assembly output, like so:
; <original C code> @ <filename>.bpf.c:<line>
If file name has directory names in it, they are stripped away. This
should be fine in practice as file names tend to be pretty unique with
C code anyways, and keeping log size smaller is always good.
In practice this might look something like below, where some code is
coming from application files, while others are from libbpf's usdt.bpf.h
header file:
; if (STROBEMETA_READ( @ strobemeta_probe.bpf.c:534
5592: (79) r1 = *(u64 *)(r10 -56) ; R1_w=mem_or_null(id=1589,sz=7680) R10=fp0
5593: (7b) *(u64 *)(r10 -56) = r1 ; R1_w=mem_or_null(id=1589,sz=7680) R10=fp0
5594: (79) r3 = *(u64 *)(r10 -8) ; R3_w=scalar() R10=fp0 fp-8=mmmmmmmm
...
170: (71) r1 = *(u8 *)(r8 +15) ; frame1: R1_w=scalar(...) R8_w=map_value(map=__bpf_usdt_spec,ks=4,vs=208)
171: (67) r1 <<= 56 ; frame1: R1_w=scalar(...)
172: (c7) r1 s>>= 56 ; frame1: R1_w=scalar(smin=smin32=-128,smax=smax32=127)
; val <<= arg_spec->arg_bitshift; @ usdt.bpf.h:183
173: (67) r1 <<= 32 ; frame1: R1_w=scalar(...)
174: (77) r1 >>= 32 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
175: (79) r2 = *(u64 *)(r10 -8) ; frame1: R2_w=scalar() R10=fp0 fp-8=mmmmmmmm
176: (6f) r2 <<= r1 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) R2_w=scalar()
177: (7b) *(u64 *)(r10 -8) = r2 ; frame1: R2_w=scalar(id=61) R10=fp0 fp-8_w=scalar(id=61)
; if (arg_spec->arg_signed) @ usdt.bpf.h:184
178: (bf) r3 = r2 ; frame1: R2_w=scalar(id=61) R3_w=scalar(id=61)
179: (7f) r3 >>= r1 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) R3_w=scalar()
; if (arg_spec->arg_signed) @ usdt.bpf.h:184
180: (71) r4 = *(u8 *)(r8 +14)
181: safe
log_fixup tests needed a minor adjustment as verifier log output
increased a bit and that test is quite sensitive to such changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240212235944.2816107-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For program types that don't have named context type name (e.g., BPF
iterator programs or tracepoint programs), ctx_tname will be a non-NULL
empty string. For such programs it shouldn't be possible to have
PTR_TO_CTX argument for global subprogs based on type name alone.
arg:ctx tag is the only way to have PTR_TO_CTX passed into global
subprog for such program types.
Fix this loophole, which currently would assume PTR_TO_CTX whenever
user uses a pointer to anonymous struct as an argument to their global
subprogs. This happens in practice with the following (quite common, in
practice) approach:
typedef struct { /* anonymous */
int x;
} my_type_t;
int my_subprog(my_type_t *arg) { ... }
User's intent is to have PTR_TO_MEM argument for `arg`, but verifier
will complain about expecting PTR_TO_CTX.
This fix also closes unintended s390x-specific KPROBE handling of
PTR_TO_CTX case. Selftest change is necessary to accommodate this.
Fixes: 91cc1a9974 ("bpf: Annotate context types")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240212233221.2575350-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test if the verifier verifies nullable pointer arguments correctly for BPF
struct_ops programs.
"test_maybe_null" in struct bpf_testmod_ops is the operator defined for the
test cases here.
A BPF program should check a pointer for NULL beforehand to access the
value pointed by the nullable pointer arguments, or the verifier should
reject the programs. The test here includes two parts; the programs
checking pointers properly and the programs not checking pointers
beforehand. The test checks if the verifier accepts the programs checking
properly and rejects the programs not checking at all.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240209023750.1153905-5-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Due to internal differences between LLVM and GCC the current
implementation for the CO-RE macros does not fit GCC parser, as it will
optimize those expressions even before those would be accessible by the
BPF backend.
As examples, the following would be optimized out with the original
definitions:
- As enums are converted to their integer representation during
parsing, the IR would not know how to distinguish an integer
constant from an actual enum value.
- Types need to be kept as temporary variables, as the existing type
casts of the 0 address (as expanded for LLVM), are optimized away by
the GCC C parser, never really reaching GCCs IR.
Although, the macros appear to add extra complexity, the expanded code
is removed from the compilation flow very early in the compilation
process, not really affecting the quality of the generated assembly.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240213173543.1397708-1-cupertino.miranda@oracle.com
[Changes from V1:
- Avoid conflict by rebasing with latest master.]
Some BPF tests use loop unrolling compiler pragmas that are clang
specific and not supported by GCC. These pragmas, along with their
GCC equivalences are:
#pragma clang loop unroll_count(N)
#pragma GCC unroll N
#pragma clang loop unroll(full)
#pragma GCC unroll 65534
#pragma clang loop unroll(disable)
#pragma GCC unroll 1
#pragma unroll [aka #pragma clang loop unroll(enable)]
There is no GCC equivalence to this pragma. It enables unrolling on
loops that the compiler would not ordinarily unroll even with
-O2|-funroll-loops, but it is not equivalent to full unrolling
either.
This patch adds a new header progs/bpf_compiler.h that defines the
following macros, which correspond to each pair of compiler-specific
pragmas above:
__pragma_loop_unroll_count(N)
__pragma_loop_unroll_full
__pragma_loop_no_unroll
__pragma_loop_unroll
The selftests using loop unrolling pragmas are then changed to include
the header and use these macros in place of the explicit pragmas.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240208203612.29611-1-jose.marchesi@oracle.com
Add two tests to ensure fentry programs cannot attach to
bpf_spin_{lock,unlock}() helpers. The tracing_failure.c files
can be used in the future for other tracing failure cases.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240207070107.335341-1-yonghong.song@linux.dev
The netdev CI is reporting failures for the pmtu test:
[ 115.929264] br0: port 2(vxlan_a) entered forwarding state
# 2024/02/08 17:33:22 socat[7871] E bind(7, {AF=10 [0000:0000:0000:0000:0000:0000:0000:0000]:50000}, 28): Address already in use
# 2024/02/08 17:33:22 socat[7877] E write(7, 0x5598fb6ff000, 8192): Connection refused
# TEST: IPv6, bridged vxlan4: PMTU exceptions [FAIL]
# File size 0 mismatches exepcted value in locally bridged vxlan test
The root cause is apparently a socket created by a previous iteration
of the relevant loop still lasting in LAST_ACK state.
Note that even the file size check is racy, the receiver process dumping
the file could still be running in background
Allow the listener to bound on the same local port via SO_REUSEADDR and
collect file output file size only after the listener completion.
Fixes: 136a1b434b ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4f51c11a1ce7ca7a4dabd926cffff63dadac9ba1.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The helper waiting for a listener port can match any socket whose
hexadecimal representation of source or destination addresses
matches that of the given port.
Additionally, any socket state is accepted.
All the above can let the helper return successfully before the
relevant listener is actually ready, with unexpected results.
So far I could not find any related failure in the netdev CI, but
the next patch is going to make the critical event more easily
reproducible.
Address the issue matching the port hex only vs the relevant socket
field and additionally checking the socket state for TCP sockets.
Fixes: 3bdd9fd29c ("selftests/net: synchronize udpgro tests' tx and rx connection")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/192b3dbc443d953be32991d1b0ca432bd4c65008.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mentioned test is failing in slow environments:
# SO_TXTIME ipv4 clock monotonic
# ./so_txtime: recv: timeout: Resource temporarily unavailable
not ok 1 selftests: net: so_txtime.sh # exit=1
Tuning the tolerance in the test binary is error-prone and doomed
to failures is slow-enough environment.
Just resort to suppress any error in such cases. Note to suppress
them we need first to refactor a bit the code moving it to explicit
error handling.
Fixes: af5136f950 ("selftests/net: SO_TXTIME with ETF and FQ")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/2142d9ed4b5c5aa07dd1b455779625d91b175373.1707730902.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The gro self-tests sends the packets to be aggregated with
multiple write operations.
When running is slow environment, it's hard to guarantee that
the GRO engine will wait for the last packet in an intended
train.
The above causes almost deterministic failures in our CI for
the 'large' test-case.
Address the issue explicitly ignoring failures for such case
in slow environments (KSFT_MACHINE_SLOW==true).
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/97d3ba83f5a2bfeb36f6bc0fb76724eb3dafb608.1707729403.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Older glibc's netinet/in.h may leave IPPROTO_MPTCP undefined when
building ip_local_port_range.c, that leads to "error: use of undeclared
identifier 'IPPROTO_MPTCP'".
Define IPPROTO_MPTCP in such cases, just like in other MPTCP selftests.
Fixes: 122db5e363 ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/netdev/CA+G9fYvGO5q4o_Td_kyQgYieXWKw6ktMa-Q0sBu6S-0y3w2aEQ@mail.gmail.com/
Signed-off-by: Maxim Galaganov <max@internet.ru>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20240209132512.254520-1-max@internet.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests of changing permanent routes to temporary routes and the reversed
case to make sure GC working correctly in these cases. Add tests for the
temporary routes from RA.
The existing device will be deleted between tests to remove all routes
associated with it, so that the earlier tests don't mess up the later ones.
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test is time sensitive. It may fail on virtual machines and for
debug builds.
Similar to commit c41dfb0dfb ("selftests/net: ignore timing errors in
so_txtime if KSFT_MACHINE_SLOW"), optionally suppress failure for timing
errors (only).
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When compiling rtla with clang, I am getting the following warnings:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
[..]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs)
-c -o src/osnoise_hist.o src/osnoise_hist.c
src/osnoise_hist.c:138:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
138 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~
src/osnoise_hist.c:149:6: note: uninitialized use occurs here
149 | if (bucket < entries)
| ^~~~~~
src/osnoise_hist.c:138:2: note: remove the 'if' if its condition is always true
138 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~~~~~~
139 | bucket = duration / data->bucket_size;
src/osnoise_hist.c:132:12: note: initialize the variable 'bucket' to silence this warning
132 | int bucket;
| ^
| = 0
1 warning generated.
[...]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs)
-c -o src/timerlat_hist.o src/timerlat_hist.c
src/timerlat_hist.c:181:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
181 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~
src/timerlat_hist.c:204:6: note: uninitialized use occurs here
204 | if (bucket < entries)
| ^~~~~~
src/timerlat_hist.c:181:2: note: remove the 'if' if its condition is always true
181 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~~~~~~
182 | bucket = latency / data->bucket_size;
src/timerlat_hist.c:175:12: note: initialize the variable 'bucket' to silence this warning
175 | int bucket;
| ^
| = 0
1 warning generated.
This is a legit warning, but data->bucket_size is always > 0 (see
timerlat_hist_parse_args()), so the if is not necessary.
Remove the unneeded if (data->bucket_size) to avoid the warning.
Link: https://lkml.kernel.org/r/6e1b1665cd99042ae705b3e0fc410858c4c42346.1707217097.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Donald Zickus <dzickus@redhat.com>
Fixes: 1eeb6328e8 ("rtla/timerlat: Add timerlat hist mode")
Fixes: 829a6c0b56 ("rtla/osnoise: Add the hist mode")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
issues or aren't considered to be needed in earlier kernel versions.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZcfLvgAKCRDdBJ7gKXxA
joCTAP4/XdBXA7Sj3GyjSAkYjg2U0quwX9oRhsx2Qy9duPDaLAD+NRl9XG14YSOB
f/7OiTQoDfnwVgHAOVBHY/ylrcgZRQg=
=2wdS
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
nilfs2: fix potential bug in end_buffer_async_write
mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup
nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()
MAINTAINERS: Leo Yan has moved
mm/zswap: don't return LRU_SKIP if we have dropped lru lock
fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super
mailmap: switch email address for John Moon
mm: zswap: fix objcg use-after-free in entry destruction
mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range()
arch/arm/mm: fix major fault accounting when retrying under per-VMA lock
selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros
mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page
mm: memcg: optimize parent iteration in memcg_rstat_updated()
nilfs2: fix data corruption in dsync block recovery for small block sizes
mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get()
exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock)
fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats
fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand()
getrusage: use sig->stats_lock rather than lock_task_sighand()
getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand()
...
This exact case was fail for async crypto and we weren't
catching it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We've had issues with gcc and 'asm goto' before, and we created a
'asm_volatile_goto()' macro for that in the past: see commits
3f0116c323 ("compiler/gcc4: Add quirk for 'asm goto' miscompilation
bug") and a9f180345f ("compiler/gcc4: Make quirk for
asm_volatile_goto() unconditional").
Then, much later, we ended up removing the workaround in commit
43c249ea0b ("compiler-gcc.h: remove ancient workaround for gcc PR
58670") because we no longer supported building the kernel with the
affected gcc versions, but we left the macro uses around.
Now, Sean Christopherson reports a new version of a very similar
problem, which is fixed by re-applying that ancient workaround. But the
problem in question is limited to only the 'asm goto with outputs'
cases, so instead of re-introducing the old workaround as-is, let's
rename and limit the workaround to just that much less common case.
It looks like there are at least two separate issues that all hit in
this area:
(a) some versions of gcc don't mark the asm goto as 'volatile' when it
has outputs:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420
which is easy to work around by just adding the 'volatile' by hand.
(b) Internal compiler errors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422
which are worked around by adding the extra empty 'asm' as a
barrier, as in the original workaround.
but the problem Sean sees may be a third thing since it involves bad
code generation (not an ICE) even with the manually added 'volatile'.
but the same old workaround works for this case, even if this feels a
bit like voodoo programming and may only be hiding the issue.
Reported-and-tested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
udpgso regression test configures routing and device MTU directly through
uAPI (Netlink, ioctl) to do its job. While there is nothing wrong with it,
it takes more effort than doing it from shell.
Looking forward, we would like to extend the udpgso regression tests to
cover the EIO corner case [1], once it gets addressed. That will require a
dummy device and device feature manipulation to set it up. Which means more
Netlink code.
So, in preparation, pull out network configuration into the shell script
part of the test, so it is easily extendable in the future.
Also, because it now easy to setup routing, add a second local IPv6
address. Because the second address is not managed by the kernel, we can
"replace" the corresponding local route with a reduced-MTU one. This
unblocks the disabled "ipv6 connected" test case. Add a similar setup for
IPv4 for symmetry.
[1] https://lore.kernel.org/netdev/87jzqsld6q.fsf@cloudflare.com/
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20240207-jakub-krn-635-v3-1-3dfa3da8a7d3@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case into the netlink checks that will show the number of
nested action recursions won't exceed 16. Going to 17 on a small
clone call isn't enough to exhaust the stack on (most) systems, so
it should be safe to run even on systems that don't have the fix
applied.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240207132416.1488485-3-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The altnames test uses the forwarding/lib.sh and that dependency
currently causes failures when running the test after install:
make -C tools/testing/selftests/ TARGETS=net install
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:altnames.sh
# ...
# ./altnames.sh: line 8: ./forwarding/lib.sh: No such file or directory
# RTNETLINK answers: Operation not permitted
# ./altnames.sh: line 73: tests_run: command not found
# ./altnames.sh: line 65: pre_cleanup: command not found
Address the issue leveraging the TEST_INCLUDES infrastructure
provided by commit 2a0683be5b ("selftests: Introduce Makefile variable
to list shared bash scripts")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/f7b1e9d468224cbc136d304362315499fe39848f.1707298927.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 8 new mirred tdc tests that target mirred to block:
- Add mirred mirror to egress block action
- Add mirred mirror to ingress block action
- Add mirred redirect to egress block action
- Add mirred redirect to ingress block action
- Try to add mirred action with both dev and block
- Try to add mirred action without specifying neither dev nor block
- Replace mirred redirect to dev action with redirect to block
- Replace mirred redirect to block action with mirror to dev
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240202020726.529170-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The redirection test case fails in the netdev CI on debug kernels
because an FDB entry is learned despite the presence of a tc filter that
redirects incoming traffic [1].
I am unable to reproduce the failure locally, but I can see how it can
happen given that learning is first enabled and only then the ingress tc
filter is configured. On debug kernels the time window between these two
operations is longer compared to regular kernels, allowing random
packets to be transmitted and trigger learning.
Fix by reversing the order and configure the ingress tc filter before
enabling learning.
[1]
[...]
# TEST: Locked port MAB redirect [FAIL]
# Locked entry created for redirected traffic
Fixes: 38c43a1ce7 ("selftests: forwarding: Add test case for traffic redirection from a locked port")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Suppress the following grep warnings:
[...]
INFO: # Port group entries configuration tests - (*, G)
TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ]
TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv4 (*, G) port group entries configuration tests [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv6 (*, G) port group entries configuration tests [ OK ]
[...]
They do not fail the test, but do clutter the output.
Fixes: b6d00da086 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.
Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].
Fix by reducing the Max Response Delay to 1 second.
[1]
[...]
# TEST: IPv4 host entries forwarding tests [FAIL]
# Packet locally received after flood
Fixes: b6d00da086 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.
Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].
Fix by reducing the Max Response Delay to 1 second.
[1]
[...]
# TEST: L2 miss - Multicast (IPv4) [FAIL]
# Unregistered multicast filter was hit after adding MDB entry
Fixes: 8c33266ae2 ("selftests: forwarding: Add layer 2 miss test cases")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test toggles the carrier of a bridge port in order to test the
bridge backup port feature.
Due to the linkwatch delayed work the carrier change is not always
reflected fast enough to the bridge driver and packets are not forwarded
as the test expects, resulting in failures [1].
Fix by busy waiting on the bridge port state until it changes to the
desired state following the carrier change.
[1]
# Backup port
# -----------
[...]
# TEST: swp1 carrier off [ OK ]
# TEST: No forwarding out of swp1 [FAIL]
[ 641.995910] br0: port 1(swp1) entered disabled state
# TEST: No forwarding out of vx0 [ OK ]
Fixes: b408453053 ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208123110.1063930-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two tests that make use of multicast routig (router.sh and
router_multicast.sh) are currently failing in the netdev CI because the
kernel is missing multicast routing support.
Fix by adding the required config entries.
Fixes: 6d4efada3b ("selftests: forwarding: Add multicast routing test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208165538.1303021-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/common.h
38cc3c6dcc ("net: stmmac: protect updates of 64-bit statistics counters")
fd5a6a7131 ("net: stmmac: est: Per Tx-queue error count for HLBF")
c5c3e1bfc9 ("net: stmmac: Offload queueMaxSDU from tc-taprio")
drivers/net/wireless/microchip/wilc1000/netdev.c
c901388028 ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000")
328efda22a ("wifi: wilc1000: do not realloc workqueue everytime an interface is added")
net/unix/garbage.c
11498715f2 ("af_unix: Remove io_uring code for GC.")
1279f9d9de ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- nic: intel: fix old compiler regressions
- netfilter: ipset: missing gc cancellations fixed
Current release - new code bugs:
- netfilter: ctnetlink: fix filtering for zone 0
Previous releases - regressions:
- core: fix from address in memcpy_to_iter_csum()
- netfilter: nfnetlink_queue: un-break NF_REPEAT
- af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.
- devlink: avoid potential loop in devlink_rel_nested_in_notify_work()
- iwlwifi:
- mvm: fix a battery life regression
- fix double-free bug
- mac80211: fix waiting for beacons logic
- nic: nfp: flower: prevent re-adding mac index for bonded port
Previous releases - always broken:
- rxrpc: fix generation of serial numbers to skip zero
- tipc: check the bearer type before calling tipc_udp_nl_bearer_add()
- tunnels: fix out of bounds access when building IPv6 PMTU error
- nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER missed
- nic: atlantic: fix DMA mapping for PTP hwts ring
Misc:
- selftests: more fixes to deal with very slow hosts
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ihj+
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and netfilter.
Current release - regressions:
- nic: intel: fix old compiler regressions
- netfilter: ipset: missing gc cancellations fixed
Current release - new code bugs:
- netfilter: ctnetlink: fix filtering for zone 0
Previous releases - regressions:
- core: fix from address in memcpy_to_iter_csum()
- netfilter: nfnetlink_queue: un-break NF_REPEAT
- af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.
- devlink: avoid potential loop in devlink_rel_nested_in_notify_work()
- iwlwifi:
- mvm: fix a battery life regression
- fix double-free bug
- mac80211: fix waiting for beacons logic
- nic: nfp: flower: prevent re-adding mac index for bonded port
Previous releases - always broken:
- rxrpc: fix generation of serial numbers to skip zero
- tipc: check the bearer type before calling tipc_udp_nl_bearer_add()
- tunnels: fix out of bounds access when building IPv6 PMTU error
- nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER
missed
- nic: atlantic: fix DMA mapping for PTP hwts ring
Misc:
- selftests: more fixes to deal with very slow hosts"
* tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
netfilter: nft_set_pipapo: remove scratch_aligned pointer
netfilter: nft_set_pipapo: add helper to release pcpu scratch area
netfilter: nft_set_pipapo: store index in scratch maps
netfilter: nft_set_rbtree: skip end interval element from gc
netfilter: nfnetlink_queue: un-break NF_REPEAT
netfilter: nf_tables: use timestamp to check for set element timeout
netfilter: nft_ct: reject direction for ct id
netfilter: ctnetlink: fix filtering for zone 0
s390/qeth: Fix potential loss of L3-IP@ in case of network issues
netfilter: ipset: Missing gc cancellations fixed
octeontx2-af: Initialize maps.
net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio
net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio
netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
netfilter: nft_compat: restrict match/target protocol to u16
netfilter: nft_compat: reject unused compat flag
netfilter: nft_compat: narrow down revision to unsigned 8-bits
net: intel: fix old compiler regressions
MAINTAINERS: Maintainer change for rds
selftests: cmsg_ipv6: repeat the exact packet
...
-----BEGIN PGP SIGNATURE-----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=Rh2n
-----END PGP SIGNATURE-----
Merge tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Narrow down target/match revision to u8 in nft_compat.
2) Bail out with unused flags in nft_compat.
3) Restrict layer 4 protocol to u16 in nft_compat.
4) Remove static in pipapo get command that slipped through when
reducing set memory footprint.
5) Follow up incremental fix for the ipset performance regression,
this includes the missing gc cancellation, from Jozsef Kadlecsik.
6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0
as no filtering, from Felix Huettner.
7) Reject direction for NFT_CT_ID.
8) Use timestamp to check for set element expiration while transaction
is handled to prevent garbage collection from removing set elements
that were just added by this transaction. Packet path and netlink
dump/get path still use current time to check for expiration.
9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal.
10) map_index needs to be percpu and per-set, not just percpu.
At this time its possible for a pipapo set to fill the all-zero part
with ones and take the 'might have bits set' as 'start-from-zero' area.
From Florian Westphal. This includes three patches:
- Change scratchpad area to a structure that provides space for a
per-set-and-cpu toggle and uses it of the percpu one.
- Add a new free helper to prepare for the next patch.
- Remove the scratch_aligned pointer and makes AVX2 implementation
use the exact same memory addresses for read/store of the matching
state.
netfilter pull request 24-02-08
* tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_pipapo: remove scratch_aligned pointer
netfilter: nft_set_pipapo: add helper to release pcpu scratch area
netfilter: nft_set_pipapo: store index in scratch maps
netfilter: nft_set_rbtree: skip end interval element from gc
netfilter: nfnetlink_queue: un-break NF_REPEAT
netfilter: nf_tables: use timestamp to check for set element timeout
netfilter: nft_ct: reject direction for ct id
netfilter: ctnetlink: fix filtering for zone 0
netfilter: ipset: Missing gc cancellations fixed
netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
netfilter: nft_compat: restrict match/target protocol to u16
netfilter: nft_compat: reject unused compat flag
netfilter: nft_compat: narrow down revision to unsigned 8-bits
====================
Link: https://lore.kernel.org/r/20240208112834.1433-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
previously filtering for the default zone would actually skip the zone
filter and flush all zones.
Fixes: eff3c558bb ("netfilter: ctnetlink: support filtering by zone")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Closes: https://lore.kernel.org/netdev/2032238f-31ac-4106-8f22-522e76df5a12@ovn.org/
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use slowwait instead of hard code sleep for bonding tests.
In function setup_prepare(), the client_create() will be called after
server_create(). So I think there is no need to sleep in server_create()
and remove it.
For lab_lib.sh, remove bonding module may affect other running bonding tests.
And some test env may buildin bond which can't be removed. The bonding
link should be removed by lag_reset_network() or netns delete.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240205130048.282087-5-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of grat_arp is testing commit 9949e2efb5 ("bonding: fix
send_peer_notif overflow"). As the send_peer_notif was defined to u8,
to overflow it, we need to
send_peer_notif = num_peer_notif * peer_notif_delay = num_grat_arp * peer_notify_delay / miimon > 255
(kernel) (kernel parameter) (user parameter)
e.g. 30 (num_grat_arp) * 1000 (peer_notify_delay) / 100 (miimon) > 255.
Which need 30s to complete sending garp messages. To save the testing time,
the only way is reduce the miimon number. Something like
30 (num_grat_arp) * 100 (peer_notify_delay) / 10 (miimon) > 255.
To save more time, the 50 num_grat_arp testing could be removed.
The arp_validate_test also need to check the mii_status, which sleep
too long. Use slowwait to save some time.
For other connection checkings, make sure active slave changed first.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240205130048.282087-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use tc filter to check if LACP was sent, which is accurate and save
more time.
No need to remove bonding module as some test env may buildin bonding.
And the bond link has been deleted.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240205130048.282087-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add slowwait functions to wait for some operations that may need a long time
to finish. The busywait executes the cmd too fast, which is kind of wasting
cpu in this scenario. At the same time, if shell debugging is enabled with
`set -x`. the busywait will output too much logs.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240205130048.282087-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the series "Annotate kfuncs in .BTF_ids section"[0], kfuncs can be
generated from bpftool. Let's mark the existing cpumask kfunc declarations
__weak so they don't conflict with definitions that will eventually come
from vmlinux.h.
[0]. https://lore.kernel.org/all/cover.1706491398.git.dxu@dxuuu.xyz
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20240206081416.26242-5-laoar.shao@gmail.com
We should verify the return value of cpumask_success__load().
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240206081416.26242-4-laoar.shao@gmail.com
The .BTF_ids section is pre-filled with zeroed BTF ID entries during the
build and afterwards patched by resolve_btfids with correct values.
Since resolve_btfids always writes in host-native endianness, it relies
on libelf to do the translation when the target ELF is cross-compiled to
a different endianness (this was introduced in commit 61e8aeda93
("bpf: Fix libelf endian handling in resolv_btfids")).
Unfortunately, the translation will corrupt the flags fields of SET8
entries because these were written during vmlinux compilation and are in
the correct endianness already. This will lead to numerous selftests
failures such as:
$ sudo ./test_verifier 502 502
#502/p sleepable fentry accept FAIL
Failed to load prog 'Invalid argument'!
bpf_fentry_test1 is not sleepable
verification time 34 usec
stack depth 0
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
Since it's not possible to instruct libelf to translate just certain
values, let's manually bswap the flags (both global and entry flags) in
resolve_btfids when needed, so that libelf then translates everything
correctly.
Fixes: ef2c6f370a ("tools/resolve_btfids: Add support for 8-byte BTF sets")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/7b6bff690919555574ce0f13d2a5996cacf7bf69.1707223196.git.vmalik@redhat.com
Instead of using magic offsets to access BTF ID set data, leverage types
from btf_ids.h (btf_id_set and btf_id_set8) which define the actual
layout of the data. Thanks to this change, set sorting should also
continue working if the layout changes.
This requires to sync the definition of 'struct btf_id_set8' from
include/linux/btf_ids.h to tools/include/linux/btf_ids.h. We don't sync
the rest of the file at the moment, b/c that would require to also sync
multiple dependent headers and we don't need any other defs from
btf_ids.h.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/ff7f062ddf6a00815fda3087957c4ce667f50532.1707223196.git.vmalik@redhat.com
* Avoid false positive for check that only matters on AMD processors
x86:
* Give a hint when Win2016 might fail to boot due to XSAVES && !XSAVEC configuration
* Do not allow creating an in-kernel PIT unless an IOAPIC already exists
RISC-V:
* Allow ISA extensions that were enabled for bare metal in 6.8
(Zbc, scalar and vector crypto, Zfh[min], Zihintntl, Zvfh[min], Zfa)
S390:
* fix CC for successful PQAP instruction
* fix a race when creating a shadow page
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmXB9EIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNF6Qf/VbNzzntY2BBNL6ZReqH+7GqMCMo7
Q8OYsP+B7TWc0C84JNBTmvC5lwY0FmXEV+i9XFUnyMt/eEHEfr/rko1McRf+byAM
vcfbTAz8t24bFSfojg7QJGM+pfUTrqjGmWqHwke/DuARsGB8Zntgtb50m966+xso
kDtcsrfGOlpHbnnWZQLLQKJ6tVv7Z2/clFlf4gCT/Quex4Jo76Uq08MA9BFS9iw1
e1oftwuXe6pCUcyt1M/AwOe8FnkP+Xm8oVmW0eJgO0TVDwob0Msx2LpVS2N/+/Oj
1mtBSz4rUQyDdI1j6D0+HkdAlNnwEWSV6eQb+qtjXbhIWBOHUpFXNpQWkg==
=LVAr
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86 guest:
- Avoid false positive for check that only matters on AMD processors
x86:
- Give a hint when Win2016 might fail to boot due to XSAVES &&
!XSAVEC configuration
- Do not allow creating an in-kernel PIT unless an IOAPIC already
exists
RISC-V:
- Allow ISA extensions that were enabled for bare metal in 6.8 (Zbc,
scalar and vector crypto, Zfh[min], Zihintntl, Zvfh[min], Zfa)
S390:
- fix CC for successful PQAP instruction
- fix a race when creating a shadow page"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/coco: Define cc_vendor without CONFIG_ARCH_HAS_CC_PLATFORM
x86/kvm: Fix SEV check in sev_map_percpu_data()
KVM: x86: Give a hint when Win2016 might fail to boot due to XSAVES erratum
KVM: x86: Check irqchip mode before create PIT
KVM: riscv: selftests: Add Zfa extension to get-reg-list test
RISC-V: KVM: Allow Zfa extension for Guest/VM
KVM: riscv: selftests: Add Zvfh[min] extensions to get-reg-list test
RISC-V: KVM: Allow Zvfh[min] extensions for Guest/VM
KVM: riscv: selftests: Add Zihintntl extension to get-reg-list test
RISC-V: KVM: Allow Zihintntl extension for Guest/VM
KVM: riscv: selftests: Add Zfh[min] extensions to get-reg-list test
RISC-V: KVM: Allow Zfh[min] extensions for Guest/VM
KVM: riscv: selftests: Add vector crypto extensions to get-reg-list test
RISC-V: KVM: Allow vector crypto extensions for Guest/VM
KVM: riscv: selftests: Add scaler crypto extensions to get-reg-list test
RISC-V: KVM: Allow scalar crypto extensions for Guest/VM
KVM: riscv: selftests: Add Zbc extension to get-reg-list test
RISC-V: KVM: Allow Zbc extension for Guest/VM
KVM: s390: fix cc for successful PQAP
KVM: s390: vsie: fix race during shadow creation
cmsg_ipv6 test requests tcpdump to capture 4 packets,
and sends until tcpdump quits. Only the first packet
is "real", however, and the rest are basic UDP packets.
So if tcpdump doesn't start in time it will miss
the real packet and only capture the UDP ones.
This makes the test fail on slow machine (no KVM or with
debug enabled) 100% of the time, while it passes in fast
environments.
Repeat the "real" / expected packet.
Fixes: 9657ad09e1 ("selftests: net: test IPV6_TCLASS")
Fixes: 05ae83d5a4 ("selftests: net: test IPV6_HOPLIMIT")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Multi-attr elements could not be encoded because of missing logic in the
ynl code. Enable encoding of these attributes by checking if the
attribute is a multi-attr and if the value to be processed is a list.
This has been tested both with the taprio and ets qdisc which contain
this kind of attributes.
Signed-off-by: Alessandro Marcolini <alessandromarcolini99@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/c5bc9f5797168dbf7a4379c42f38d5de8ac7f38a.1706962013.git.alessandromarcolini99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop dirty_log_page_splitting_test's assertion that the number of 4KiB
pages remains the same across dirty logging being enabled and disabled, as
the test doesn't guarantee that mappings outside of the memslots being
dirty logged are stable, e.g. KVM's mappings for code and pages in
memslot0 can be zapped by things like NUMA balancing.
To preserve the spirit of the check, assert that (a) the number of 4KiB
pages after splitting is _at least_ the number of 4KiB pages across all
memslots under test, and (b) the number of hugepages before splitting adds
up to the number of pages across all memslots under test. (b) is a little
tenuous as it relies on memslot0 being incompatible with transparent
hugepages, but that holds true for now as selftests explicitly madvise()
MADV_NOHUGEPAGE for memslot0 (__vm_create() unconditionally specifies the
backing type as VM_MEM_SRC_ANONYMOUS).
Reported-by: Yi Lai <yi1.lai@intel.com>
Reported-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Tao Su <tao1.su@linux.intel.com>
Link: https://lore.kernel.org/r/20240131222728.4100079-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When finishing the final iteration of dirty_log_test testcase, set
host_quit _before_ the final "continue" so that the vCPU worker doesn't
run an extra iteration, and delete the hack-a-fix of an extra "continue"
from the dirty ring testcase. This fixes a bug where the extra post to
sem_vcpu_cont may not be consumed, which results in failures in subsequent
runs of the testcases. The bug likely was missed during development as
x86 supports only a single "guest mode", i.e. there aren't any subsequent
testcases after the dirty ring test, because for_each_guest_mode() only
runs a single iteration.
For the regular dirty log testcases, letting the vCPU run one extra
iteration is a non-issue as the vCPU worker waits on sem_vcpu_cont if and
only if the worker is explicitly told to stop (vcpu_sync_stop_requested).
But for the dirty ring test, which needs to periodically stop the vCPU to
reap the dirty ring, letting the vCPU resume the guest _after_ the last
iteration means the vCPU will get stuck without an extra "continue".
However, blindly firing off an post to sem_vcpu_cont isn't guaranteed to
be consumed, e.g. if the vCPU worker sees host_quit==true before resuming
the guest. This results in a dangling sem_vcpu_cont, which leads to
subsequent iterations getting out of sync, as the vCPU worker will
continue on before the main task is ready for it to resume the guest,
leading to a variety of asserts, e.g.
==== Test Assertion Failure ====
dirty_log_test.c:384: dirty_ring_vcpu_ring_full
pid=14854 tid=14854 errno=22 - Invalid argument
1 0x00000000004033eb: dirty_ring_collect_dirty_pages at dirty_log_test.c:384
2 0x0000000000402d27: log_mode_collect_dirty_pages at dirty_log_test.c:505
3 (inlined by) run_test at dirty_log_test.c:802
4 0x0000000000403dc7: for_each_guest_mode at guest_modes.c:100
5 0x0000000000401dff: main at dirty_log_test.c:941 (discriminator 3)
6 0x0000ffff9be173c7: ?? ??:0
7 0x0000ffff9be1749f: ?? ??:0
8 0x000000000040206f: _start at ??:?
Didn't continue vcpu even without ring full
Alternatively, the test could simply reset the semaphores before each
testcase, but papering over hacks with more hacks usually ends in tears.
Reported-by: Shaoqin Huang <shahuang@redhat.com>
Fixes: 84292e5659 ("KVM: selftests: Add dirty ring buffer test")
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240202231831.354848-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When the feature_flags and xdp_zc_max_segs fields were added to the libbpf
bpf_xdp_query_opts, the code writing them did not use the OPTS_SET() macro.
This causes libbpf to write to those fields unconditionally, which means
that programs compiled against an older version of libbpf (with a smaller
size of the bpf_xdp_query_opts struct) will have its stack corrupted by
libbpf writing out of bounds.
The patch adding the feature_flags field has an early bail out if the
feature_flags field is not part of the opts struct (via the OPTS_HAS)
macro, but the patch adding xdp_zc_max_segs does not. For consistency, this
fix just changes the assignments to both fields to use the OPTS_SET()
macro.
Fixes: 13ce2daa25 ("xsk: add new netlink attribute dedicated for ZC max frags")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240206125922.1992815-1-toke@redhat.com
[Differences from V2:
- Remove conditionals in the source files pragmas, as the
pragma is supported by both GCC and clang.]
Both GCC and clang implement the -Wno-address-of-packed-member
warning, which is enabled by -Wall, that warns about taking the
address of a packed struct field when it can lead to an "unaligned"
address.
This triggers the following errors (-Werror) when building three
particular BPF selftests with GCC:
progs/test_cls_redirect.c
986 | if (ipv4_is_fragment((void *)&encap->ip)) {
progs/test_cls_redirect_dynptr.c
410 | pkt_ipv4_checksum((void *)&encap_gre->ip);
progs/test_cls_redirect.c
521 | pkt_ipv4_checksum((void *)&encap_gre->ip);
progs/test_tc_tunnel.c
232 | set_ipv4_csum((void *)&h_outer.ip);
These warnings do not signal any real problem in the tests as far as I
can see.
This patch adds pragmas to these test files that inhibit the
-Waddress-of-packed-member warning.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240206102330.7113-1-jose.marchesi@oracle.com
Leverage previously added MOCK_FLAGS_DEVICE_HUGE_IOVA flag to create an
IOMMU domain with more than MOCK_IO_PAGE_SIZE supported.
Plumb the hugetlb backing memory for buffer allocation and change the
expected page size to MOCK_HUGE_PAGE_SIZE (1M) when hugepage variant test
cases are used. These so far are limited to 128M and 256M IOVA range tests
cases which is when 1M hugepages can be used.
Link: https://lore.kernel.org/r/20240202133415.23819-9-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Rework the functions that test and set the bitmaps to receive a new
parameter (the pte_page_size) that reflects the expected PTE size in the
page tables. The same scheme is still used i.e. even bits are dirty and
odd page indexes aren't dirty. Here it just refactors to consider the size
of the PTE rather than hardcoded to IOMMU mock base page assumptions.
While at it, refactor dirty bitmap tests to use the idev_id created by the
fixture instead of creating a new one.
This is in preparation for doing tests with IOMMU hugepages where multiple
bits set as part of recording a whole hugepage as dirty and thus the
pte_page_size will vary depending on io hugepages or io base pages.
Link: https://lore.kernel.org/r/20240202133415.23819-6-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Exercise the dirty tracking bitmaps with byte unaligned addresses in
addition to the PAGE_SIZE unaligned bitmaps, using a address towards the
end of the page boundary.
In doing so, increase the tailroom we allocate for the bitmap from
MOCK_PAGE_SIZE(2K) into PAGE_SIZE(4K), such that we can test end of bitmap
boundary.
Link: https://lore.kernel.org/r/20240202133415.23819-4-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support for the independent control state machine per IEEE
802.1AX-2008 5.4.15 in addition to the existing implementation of the
coupled control state machine.
Introduces two new states, AD_MUX_COLLECTING and AD_MUX_DISTRIBUTING in
the LACP MUX state machine for separated handling of an initial
Collecting state before the Collecting and Distributing state. This
enables a port to be in a state where it can receive incoming packets
while not still distributing. This is useful for reducing packet loss when
a port begins distributing before its partner is able to collect.
Added new functions such as bond_set_slave_tx_disabled_flags and
bond_set_slave_rx_enabled_flags to precisely manage the port's collecting
and distributing states. Previously, there was no dedicated method to
disable TX while keeping RX enabled, which this patch addresses.
Note that the regular flow process in the kernel's bonding driver remains
unaffected by this patch. The extension requires explicit opt-in by the
user (in order to ensure no disruptions for existing setups) via netlink
support using the new bonding parameter coupled_control. The default value
for coupled_control is set to 1 so as to preserve existing behaviour.
Signed-off-by: Aahil Awatramani <aahila@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240202175858.1573852-1-aahila@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Selftests here check not only that connect()/accept() for
TCP-AO/TCP-MD5/non-signed-TCP combinations do/don't establish
connections, but also counters: those are per-AO-key, per-socket and
per-netns.
The counters are checked on the server's side, as the server listener
has TCP-AO/TCP-MD5/no keys for different peers. All tests run in
the same namespaces with the same veth pair, created in test_init().
After close() in both client and server, the sides go through
the regular FIN/ACK + FIN/ACK sequence, which goes in the background.
If the selftest has already started a new testing scenario, read
per-netns counters - it may fail in the end iff it doesn't expect
the TCPAOGood per-netns counters go up during the test.
Let's just kill both TCP-AO sides - that will avoid any asynchronous
background TCP-AO segments going to either sides.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20240201132153.4d68f45e@kernel.org/T/#u
Fixes: 6f0c472a68 ("selftests/net: Add TCP-AO + TCP-MD5 + no sign listen socket tests")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240202-unsigned-md5-netns-counters-v1-1-8b90c37c0566@arista.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test is time sensitive. It may fail on virtual machines and for
debug builds.
Continue to run in these environments to get code coverage. But
optionally suppress failure for timing errors (only). This is
controlled with environment variable KSFT_MACHINE_SLOW.
The test continues to return 0 (KSFT_PASS), rather than KSFT_XFAIL
as previously discussed. Because making so_txtime.c return that and
then making so_txtime.sh capture runs that pass that vs KSFT_FAIL
and pass it on added a bunch of (fragile bash) boilerplate, while the
result is interpreted the same as KSFT_PASS anyway.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240201162130.2278240-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Mark dynptr kfuncs as __weak to allow
verifier_global_subprogs/arg_ctx_{perf,kprobe,raw_tp} subtests to be
loadable on old kernels. Because bpf_dynptr_from_xdp() kfunc is used
from arg_tag_dynptr BPF program in progs/verifier_global_subprogs.c
*and* is not marked as __weak, loading any subtest from
verifier_global_subprogs fails on old kernels that don't have
bpf_dynptr_from_xdp() kfunc defined. Even if arg_tag_dynptr program
itself is not loaded, libbpf bails out on non-weak reference to
bpf_dynptr_from_xdp (that can't be resolved), which shared across all
programs in progs/verifier_global_subprogs.c.
So mark all dynptr-related kfuncs as __weak to unblock libbpf CI ([0]).
In the upcoming "kfunc in vmlinux.h" work we should make sure that
kfuncs are always declared __weak as well.
[0] https://github.com/libbpf/libbpf/actions/runs/7792673215/job/21251250831?pr=776#step:4:7961
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240206004008.1541513-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If PERF_EVENT program has __arg_ctx argument with matching
architecture-specific pt_regs/user_pt_regs/user_regs_struct pointer
type, libbpf should still perform type rewrite for old kernels, but not
emit the warning. Fix copy/paste from kernel code where 0 is meant to
signify "no error" condition. For libbpf we need to return "true" to
proceed with type rewrite (which for PERF_EVENT program will be
a canonical `struct bpf_perf_event_data *` type).
Fixes: 9eea8fafe3 ("libbpf: fix __arg_ctx type enforcement for perf_event programs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240206002243.1439450-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests covering the following cases:
- A static or global subprog called from within a RCU read section works
- A static subprog taking an RCU read lock which is released in caller works
- A static subprog releasing the caller's RCU read lock works
Global subprogs that leave the lock in an imbalanced state will not
work, as they are verified separately, so ensure those cases fail as
well.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240205055646.1112186-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests for static subprog calls within bpf_spin_lock critical
section, and ensure we still reject global subprog calls. Also test the
case where a subprog call will unlock the caller's held lock, or the
caller will unlock a lock taken by a subprog call, ensuring correct
transfer of lock state across frames on exit.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240204222349.938118-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, calling any helpers, kfuncs, or subprogs except the graph
data structure (lists, rbtrees) API kfuncs while holding a bpf_spin_lock
is not allowed. One of the original motivations of this decision was to
force the BPF programmer's hand into keeping the bpf_spin_lock critical
section small, and to ensure the execution time of the program does not
increase due to lock waiting times. In addition to this, some of the
helpers and kfuncs may be unsafe to call while holding a bpf_spin_lock.
However, when it comes to subprog calls, atleast for static subprogs,
the verifier is able to explore their instructions during verification.
Therefore, it is similar in effect to having the same code inlined into
the critical section. Hence, not allowing static subprog calls in the
bpf_spin_lock critical section is mostly an annoyance that needs to be
worked around, without providing any tangible benefit.
Unlike static subprog calls, global subprog calls are not safe to permit
within the critical section, as the verifier does not explore them
during verification, therefore whether the same lock will be taken
again, or unlocked, cannot be ascertained.
Therefore, allow calling static subprogs within a bpf_spin_lock critical
section, and only reject it in case the subprog linkage is global.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240204222349.938118-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recently, when running './test_progs -j', I occasionally hit the
following errors:
test_lwt_redirect:PASS:pthread_create 0 nsec
test_lwt_redirect_run:FAIL:netns_create unexpected error: 256 (errno 0)
#142/2 lwt_redirect/lwt_redirect_normal_nomac:FAIL
#142 lwt_redirect:FAIL
test_lwt_reroute:PASS:pthread_create 0 nsec
test_lwt_reroute_run:FAIL:netns_create unexpected error: 256 (errno 0)
test_lwt_reroute:PASS:pthread_join 0 nsec
#143/2 lwt_reroute/lwt_reroute_qdisc_dropped:FAIL
#143 lwt_reroute:FAIL
The netns_create() definition looks like below:
#define NETNS "ns_lwt"
static inline int netns_create(void)
{
return system("ip netns add " NETNS);
}
One possibility is that both lwt_redirect and lwt_reroute create
netns with the same name "ns_lwt" which may cause conflict. I tried
the following example:
$ sudo ip netns add abc
$ echo $?
0
$ sudo ip netns add abc
Cannot create namespace file "/var/run/netns/abc": File exists
$ echo $?
1
$
The return code for above netns_create() is 256. The internet search
suggests that the return value for 'ip netns add ns_lwt' is 1, which
matches the above 'sudo ip netns add abc' example.
This patch tried to use different netns names for two tests to avoid
'ip netns add <name>' failure.
I ran './test_progs -j' 10 times and all succeeded with
lwt_redirect/lwt_reroute tests.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240205052914.1742687-1-yonghong.song@linux.dev
Somehow recently I frequently hit the following test failure
with either ./test_progs or ./test_progs-cpuv4:
serial_test_ptr_untrusted:PASS:skel_open 0 nsec
serial_test_ptr_untrusted:PASS:lsm_attach 0 nsec
serial_test_ptr_untrusted:PASS:raw_tp_attach 0 nsec
serial_test_ptr_untrusted:FAIL:cmp_tp_name unexpected cmp_tp_name: actual -115 != expected 0
#182 ptr_untrusted:FAIL
Further investigation found the failure is due to
bpf_probe_read_user_str()
where reading user-level string attr->raw_tracepoint.name
is not successfully, most likely due to the
string itself still in disk and not populated into memory yet.
One solution is do a printf() call of the string before doing bpf
syscall which will force the raw_tracepoint.name into memory.
But I think a more robust solution is to use bpf_copy_from_user()
which is used in sleepable program and can tolerate page fault,
and the fix here used the latter approach.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240204194452.2785936-1-yonghong.song@linux.dev
In very slow environments, most big TCP cases including
segmentation and reassembly of big TCP packets have a good
chance to fail: by default the TCP client uses write size
well below 64K. If the host is low enough autocorking is
unable to build real big TCP packets.
Address the issue using much larger write operations.
Note that is hard to observe the issue without an extremely
slow and/or overloaded environment; reduce the TCP transfer
time to allow for much easier/faster reproducibility.
Fixes: 6bb382bcf7 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling get_system_loc_code before checking devfd and errno fails the test
when the device is not available, the expected behaviour is a SKIP.
Change the order of 'SKIP_IF_MSG' to correctly SKIP when the /dev/
papr-vpd device is not available.
Test output before:
Test FAILED on line 271
Test output after:
[SKIP] Test skipped on line 266: /dev/papr-vpd not present
Signed-off-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240131130859.14968-1-rnsastry@linux.ibm.com
Paolo points out that ifconfig is legacy and we should not use it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vendor events:
- Intel Alderlake/Sapphire Rapids metric fixes, the CPU type ("cpu_atom", "cpu_core")
needs to be used as a prefix to be considered on a metric formula, detected via one
of the 'perf test' entries.
'perf test' fixes:
- Fix the creation of event selector lists on 'perf test' entries, by initializing
the sample ID flag, which is done by 'perf record', so this fix only the tests,
the common case isn't affected.
- Make 'perf list' respect debug settings (-v) to fix its 'perf test' entry.
- Fix 'perf script' test when python support isn't enabled.
- Special case 'perf script' tests on s390, where only DWARF call graphs are
supported and only on software events.
- Make 'perf daemon' signal test less racy.
Compiler warnings/errors:
- Remove needless malloc(0) call in 'perf top' that triggers -Walloc-size.
- Fix calloc() argument order to address error introduced in gcc-14.
Build:
- Make minimal shellcheck version to v0.6.0, avoiding the build to fail with older versions.
Sync kernel header copies:
- stat.h to pick STATX_MNT_ID_UNIQUE.
- msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING.
- drm.h to pick DRM_IOCTL_MODE_CLOSEFB.
- unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers.
- x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes.
- x86's mem{cpy,set}_64.S used in 'perf bench'.
- Also, without tooling effects: asm-generic/unaligned.h, mount.h, fcntl.h, kvm headers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZbwOmQAKCRCyPKLppCJ+
J/TkAP92DD1ZKmc9WzlJ8vpbz+nXwvMIDTRSSBnvYPiDNSL6xAEAkX92qWUQ35RS
faz2v593RZ4VfthcAEl5P6FXEhHhfAc=
=pDc1
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Vendor events:
- Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
("cpu_atom", "cpu_core") needs to be used as a prefix to be
considered on a metric formula, detected via one of the 'perf test'
entries.
'perf test' fixes:
- Fix the creation of event selector lists on 'perf test' entries, by
initializing the sample ID flag, which is done by 'perf record', so
this fix affects only the tests, the common case isn't affected
- Make 'perf list' respect debug settings (-v) to fix its 'perf test'
entry
- Fix 'perf script' test when python support isn't enabled
- Special case 'perf script' tests on s390, where only DWARF call
graphs are supported and only on software events
- Make 'perf daemon' signal test less racy
Compiler warnings/errors:
- Remove needless malloc(0) call in 'perf top' that triggers
-Walloc-size
- Fix calloc() argument order to address error introduced in gcc-14
Build:
- Make minimal shellcheck version to v0.6.0, avoiding the build to
fail with older versions
Sync kernel header copies:
- stat.h to pick STATX_MNT_ID_UNIQUE
- msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING
- drm.h to pick DRM_IOCTL_MODE_CLOSEFB
- unistd.h to pick {list,stat}mount,
lsm_{[gs]et_self_attr,list_modules} syscall numbers
- x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes
- x86's mem{cpy,set}_64.S used in 'perf bench'
- Also, without tooling effects: asm-generic/unaligned.h, mount.h,
fcntl.h, kvm headers"
* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
tools include UAPI: Sync linux/mount.h copy with the kernel sources
perf evlist: Fix evlist__new_default() for > 1 core PMU
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
perf vendor events intel: Alderlake/sapphirerapids metric fixes
tools headers UAPI: Sync kvm headers with the kernel sources
perf tools: Fix calloc() arguments to address error introduced in gcc-14
perf top: Remove needless malloc(0) call that triggers -Walloc-size
perf build: Make minimal shellcheck version to v0.6.0
tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
perf test shell daemon: Make signal test less racy
perf test shell script: Fix test for python being disabled
perf test: Workaround debug output in list test
perf list: Add output file option
perf list: Switch error message to pr_err() to respect debug settings (-v)
perf test: Fix 'perf script' tests on s390
tools headers UAPI: Sync linux/fcntl.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
...
Instead of listing the genetlink families that we want to codegen
for, always codegen for everyone. We can add an opt-out later but
it seems like most families are not causing any issues, and yet
folks forget to add them to the Makefile.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240202004926.447803-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ovs_flow, ovs_vport and ovs_datapath to the families supported
in C. ovs-flow has some circular nesting which is fun to deal with,
but the necessary support has been added already in the previous
release cycle.
Add a sample that proves that dealing with fixed headers does
actually work correctly.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240202004926.447803-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DPLL and mptcp_pm families are pretty clean, and YNL C codegen
supports them fully with no changes. Add them to user space codegen
so that C samples can be written, and we know immediately if changes
to these families require YNL codegen work.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240202004926.447803-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using hard-coded constant timeout to wait for some expected
event is deemed to fail sooner or later, especially in slow
env.
Our CI has spotted another of such race:
# TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL]
# can't delete veth device in a timely manner, PMTU dst likely leaked
Replace the crude sleep with a loop looking for the expected condition
at low interval for a much longer range.
Fixes: b3cc4f8a8a ("selftests: pmtu: add explicit tests for PMTU exceptions cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/fd5c745e9bb665b724473af6a9373a8c2a62b247.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pmtu.sh test uses a few TCP listener in a problematic way:
It hard-codes a constant timeout to wait for the listener starting-up
in background. That introduces unneeded latency and on very slow and
busy host it can fail.
Additionally the test starts again the same listener in the same
namespace on the same port, just after the previous connection
completed. Fast host can attempt starting the new server before the
old one really closed the socket.
Address the issues using the wait_local_port_listen helper and
explicitly waiting for the background listener process exit.
Fixes: 136a1b434b ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f8e8f6d44427d8c45e9f6a71ee1a321047452087.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The setup_ns helper marks the testns global variable as
readonly. Later attempts to set such variable are unsuccessful,
causing a couple test failures.
Avoid completely the variable re-initialization and let the
function access the global value.
Fixes: e9ce7ededf ("selftests: rtnetlink: use setup_ns in bonding test")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/6e7c937c8ff73ca52a21a4a536a13a76ec0173a8.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The udpgro_fwd.sh self-tests are somewhat unstable. There are
a few timing constraints the we struggle to meet on very slow
environments.
Instead of skipping the whole tests in such envs, increase the
test resilience WRT very slow hosts: increase the inter-packets
timeouts, avoid resetting the counters every second and finally
disable reduce the background traffic noise.
Tested with:
for I in $(seq 1 100); do
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:udpgro_fwd.sh || exit -1
done
in a slow environment.
Fixes: a062260a9d ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f4b6b11064a0d39182a9ae6a853abae3e9b4426a.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add extra layer of global functions to ensure that passing around
(trusted) PTR_TO_BTF_ID_OR_NULL registers works as expected. We also
extend trusted_task_arg_nullable subtest to check three possible valid
argumements: known NULL, known non-NULL, and maybe NULL cases.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240202190529.2374377-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After commit c698eaebdf ("selftests/bpf: trace_helpers.c: Optimize
kallsyms cache") trace_helpers.c now includes libbpf_internal.h, and
thus can no longer use the u32 type (among others) since they are poison
in libbpf_internal.h. Replace u32 with __u32 to fix the following error
when building trace_helpers.c on powerpc:
error: attempt to use poisoned "u32"
Fixes: c698eaebdf ("selftests/bpf: trace_helpers.c: Optimize kallsyms cache")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240202095559.12900-1-shung-hsi.yu@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Check that stacksafe() compares spilled scalars with STACK_MISC.
The following combinations are explored:
- old spill of imprecise scalar is equivalent to cur STACK_{MISC,INVALID}
(plus error in unpriv mode);
- old spill of precise scalar is not equivalent to cur STACK_MISC;
- old STACK_MISC is equivalent to cur scalar;
- old STACK_MISC is not equivalent to cur non-scalar.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240127175237.526726-7-maxtram95@gmail.com
The previous commit allowed to preserve boundaries and track IDs of
scalars on narrowing fills. Add test cases for that pattern.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240127175237.526726-5-maxtram95@gmail.com
When the width of a fill is smaller than the width of the preceding
spill, the information about scalar boundaries can still be preserved,
as long as it's coerced to the right width (done by coerce_reg_to_size).
Even further, if the actual value fits into the fill width, the ID can
be preserved as well for further tracking of equal scalars.
Implement the above improvements, which makes narrowing fills behave the
same as narrowing spills and MOVs between registers.
Two tests are adjusted to accommodate for endianness differences and to
take into account that it's now allowed to do a narrowing fill from the
least significant bits.
reg_bounds_sync is added to coerce_reg_to_size to correctly adjust
umin/umax boundaries after the var_off truncation, for example, a 64-bit
value 0xXXXXXXXX00000000, when read as a 32-bit, gets umin = 0, umax =
0xFFFFFFFF, var_off = (0x0; 0xffffffff00000000), which needs to be
synced down to umax = 0, otherwise reg_bounds_sanity_check doesn't pass.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240127175237.526726-4-maxtram95@gmail.com
The previous commit added tracking for unbounded scalars on spill. Add
the test case to check the new functionality.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240127175237.526726-3-maxtram95@gmail.com
Support the pattern where an unbounded scalar is spilled to the stack,
then boundary checks are performed on the src register, after which the
stack frame slot is refilled into a register.
Before this commit, the verifier didn't treat the src register and the
stack slot as related if the src register was an unbounded scalar. The
register state wasn't copied, the id wasn't preserved, and the stack
slot was marked as STACK_MISC. Subsequent boundary checks on the src
register wouldn't result in updating the boundaries of the spilled
variable on the stack.
After this commit, the verifier will preserve the bond between src and
dst even if src is unbounded, which permits to do boundary checks on src
and refill dst later, still remembering its boundaries. Such a pattern
is sometimes generated by clang when compiling complex long functions.
One test is adjusted to reflect that now unbounded scalars are tracked.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240127175237.526726-2-maxtram95@gmail.com
CAP_NET_ADMIN allows to configure network interfaces, not CAP_SYS_ADMIN
which only allows to call unshare(2). Without this change, running
network tests as a non-root user but with all capabilities would fail at
the setup_loopback() step with "RTNETLINK answers: Operation not
permitted".
The issue is only visible when running tests with non-root users (i.e.
only relying on ambient capabilities). Indeed, when configuring the
network interface, the "ip" command is called, which may lead to the
special handling of capabilities for the root user by execve(2). If
root is the caller, then the inherited, permitted and effective
capabilities are all reset, which then includes CAP_NET_ADMIN. However,
if a non-root user is the caller, then ambient capabilities are masked
by the inherited ones, which were explicitly dropped.
To make execution deterministic whatever users are running the tests,
set the noroot secure bit for each test, and set the inheritable and
ambient capabilities to CAP_NET_ADMIN, the only capability that may be
required after an execve(2).
Factor out _effective_cap() into _change_cap(), and use it to manage
ambient capabilities with the new set_ambient_cap() and
clear_ambient_cap() helpers.
This makes it possible to run all Landlock tests with check-linux.sh
from https://github.com/landlock-lsm/landlock-test-tools
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Fixes: a549d055a2 ("selftests/landlock: Add network tests")
Link: https://lore.kernel.org/r/20240125153230.3817165-2-mic@digikod.net
[mic: Make sure SECBIT_NOROOT_LOCKED is set]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Some benchmarks don't have either "consumer" or "producer" sides. For
example, trig-tp and other BPF triggering benchmarks don't have
consumers, as they only do "producing" by calling into syscall or
predefined uproes. As such it's valid for some benchmarks to have zero
consumers or producers. So allows to specify `-c0` explicitly.
This triggers another problem. If benchmark doesn't support either
consumer or producer side, consumer_thread/producer_thread callback will
be NULL, but benchmark runner will attempt to use those NULL callback to
create threads anyways. So instead of crashing with SIGSEGV in case of
misconfigured benchmark, detect the condition and report error.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240201172027.604869-6-andrii@kernel.org
Another API that was declared in libbpf.map but actual implementation
was missing. btf_ext__get_raw_data() was intended as a discouraged alias
to consistently-named btf_ext__raw_data(), so make this an actuality.
Fixes: 20eccf29e2 ("libbpf: hide and discourage inconsistently named getters")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240201172027.604869-5-andrii@kernel.org
Seems like original commit adding split BTF support intended to add
btf__new_split() API, and even declared it in libbpf.map, but never
added (trivial) implementation. Fix this.
Fixes: ba451366bf ("libbpf: Implement basic split BTF support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240201172027.604869-4-andrii@kernel.org
LIBBPF_API annotation seems missing on libbpf_set_memlock_rlim API, so
add it to make this API callable from libbpf's shared library version.
Fixes: e542f2c4cd ("libbpf: Auto-bump RLIMIT_MEMLOCK if kernel needs it for BPF")
Fixes: ab9a5a05dc ("libbpf: fix up few libbpf.map problems")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240201172027.604869-3-andrii@kernel.org
As Paolo promised we continue to hammer out issues in our selftests.
This is not the end but probably the peak.
Current release - regressions:
- smc: fix incorrect SMC-D link group matching logic
Current release - new code bugs:
- eth: bnxt: silence WARN() when device skips a timestamp, it happens
Previous releases - regressions:
- ipmr: fix null-deref when forwarding mcast packets
- conntrack: evaluate window negotiation only for packets in the REPLY
direction, otherwise SYN retransmissions trigger incorrect window
scale negotiation
- ipset: fix performance regression in swap operation
Previous releases - always broken:
- tcp: add sanity checks to types of pages getting into
the rx zerocopy path, we only support basic NIC -> user,
no page cache pages etc.
- ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
- nt_tables: more input sanitization changes
- dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch
- bridge: mcast: fix loss of snooping after long uptime,
jiffies do wrap on 32bit
- xen-netback: properly sync TX responses, protect with locking
- phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
increase connection stability
- eth: pds: fixes for various teardown, and reset races
Misc:
- hsr: silence WARN() if we can't alloc supervision frame, it happens
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UJVq
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
As Paolo promised we continue to hammer out issues in our selftests.
This is not the end but probably the peak.
Current release - regressions:
- smc: fix incorrect SMC-D link group matching logic
Current release - new code bugs:
- eth: bnxt: silence WARN() when device skips a timestamp, it happens
Previous releases - regressions:
- ipmr: fix null-deref when forwarding mcast packets
- conntrack: evaluate window negotiation only for packets in the
REPLY direction, otherwise SYN retransmissions trigger incorrect
window scale negotiation
- ipset: fix performance regression in swap operation
Previous releases - always broken:
- tcp: add sanity checks to types of pages getting into the rx
zerocopy path, we only support basic NIC -> user, no page cache
pages etc.
- ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
- nt_tables: more input sanitization changes
- dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch
- bridge: mcast: fix loss of snooping after long uptime, jiffies do
wrap on 32bit
- xen-netback: properly sync TX responses, protect with locking
- phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
increase connection stability
- eth: pds: fixes for various teardown, and reset races
Misc:
- hsr: silence WARN() if we can't alloc supervision frame, it
happens"
* tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
doc/netlink/specs: Add missing attr in rt_link spec
idpf: avoid compiler padding in virtchnl2_ptype struct
selftests: mptcp: join: stop transfer when check is done (part 2)
selftests: mptcp: join: stop transfer when check is done (part 1)
selftests: mptcp: allow changing subtests prefix
selftests: mptcp: decrease BW in simult flows
selftests: mptcp: increase timeout to 30 min
selftests: mptcp: add missing kconfig for NF Mangle
selftests: mptcp: add missing kconfig for NF Filter in v6
selftests: mptcp: add missing kconfig for NF Filter
mptcp: fix data re-injection from stale subflow
selftests: net: enable some more knobs
selftests: net: add missing config for NF_TARGET_TTL
selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
selftests: net: List helper scripts in TEST_FILES Makefile variable
selftests: net: Remove executable bits from library scripts
selftests: bonding: Check initial state
selftests: team: Add missing config options
hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
xen-netback: properly sync TX responses
...
-----BEGIN PGP SIGNATURE-----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=yfy5
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- cleanups in the error path in hid-steam (Dan Carpenter)
- fixes for Wacom tablets selftests that sneaked in while the CI was
taking a break during the year end holidays (Benjamin Tissoires)
- null pointer check in nvidia-shield (Kunwu Chan)
- memory leak fix in hidraw (Su Hui)
- another null pointer fix in i2c-hid-of (Johan Hovold)
- another memory leak fix in HID-BPF this time, as well as a double
fdget() fix reported by Dan Carpenter (Benjamin Tissoires)
- fix for Cirque touchpad when they go on suspend (Kai-Heng Feng)
- new device ID in hid-logitech-hidpp: "Logitech G Pro X SuperLight 2"
(Jiri Kosina)
* tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: bpf: use __bpf_kfunc instead of noinline
HID: bpf: actually free hdev memory after attaching a HID-BPF program
HID: bpf: remove double fdget()
HID: i2c-hid-of: fix NULL-deref on failed power up
HID: hidraw: fix a problem of memory leak in hidraw_release()
HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend
HID: nvidia-shield: Add missing null pointer checks to LED initialization
HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
selftests/hid: wacom: fix confidence tests
HID: hid-steam: Fix cleanup in probe()
HID: hid-steam: remove pointless error message
Since the "Fixes" commits mentioned below, the newly added "userspace
pm" subtests of mptcp_join selftests are launching the whole transfer in
the background, do the required checks, then wait for the end of
transfer.
There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds on slow environments.
While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of
on a specific one with 'kill_tests_wait()'.
Fixes: b2e2248f36 ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081 ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-9-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the "Fixes" commit mentioned below, "userspace pm" subtests of
mptcp_join selftests introduced in v6.5 are launching the whole transfer
in the background, do the required checks, then wait for the end of
transfer.
There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds in slow environments.
Note that old versions will need commit bdbef0a6ff ("selftests: mptcp:
add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6ff10: selftests: mptcp: add mptcp_lib_kill_wait
Cc: stable@vger.kernel.org # 6.5.x
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a CI executes the same selftest multiple times with different
options, all results from the same subtests will have the same title,
which confuse the CI. With the same title printed in TAP, the tests are
considered as the same ones.
Now, it is possible to override this prefix by using MPTCP_LIB_KSFT_TEST
env var, and have a different title.
While at it, use 'basename' to remove the suffix as well instead of
using an extra 'sed'.
Fixes: c4192967e6 ("selftests: mptcp: lib: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-7-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running the simult_flow selftest in slow environments -- e.g. QEmu
without KVM support --, the results can be unstable. This selftest
checks if the aggregated bandwidth is (almost) fully used as expected.
To help improving the stability while still keeping the same validation
in place, the BW and the delay are reduced to lower the pressure on the
CPU.
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Fixes: 219d04992b ("mptcp: push pending frames when subflow has free space")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-6-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On very slow environments -- e.g. when QEmu is used without KVM --,
mptcp_join.sh selftest can take a bit more than 20 minutes. Bump the
default timeout by 50% as it seems normal to take that long on some
environments.
When a debug kernel config is used, this selftest will take even longer,
but that's certainly not a common test env to consider for the timeout.
The Fixes tag that has been picked here is there simply to help having
this patch backported to older stable versions. It is difficult to point
to the exact commit that made some env reaching the timeout from time to
time.
Fixes: d17b968b98 ("selftests: mptcp: increase timeout to 20 minutes")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-5-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Mangle table, only in IPv4.
This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.
Fixes: b6e074e171 ("selftests: mptcp: add infinite map testcase")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-4-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table for IPv6.
It is then required to have IP6_NF_FILTER KConfig.
This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.
Fixes: 523514ed0a ("selftests: mptcp: add ADD_ADDR IPv6 test cases")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-3-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table.
It is then required to have IP_NF_FILTER KConfig.
This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.
Fixes: 8d014eaa92 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KVM sets up Hyper-V TSC page clocksource for its guests when system
clocksource is 'based on TSC' (see gtod_is_based_on_tsc()), running
hyperv_clock with any other clocksource leads to imminent failure.
Add the missing requirement to make the test skip gracefully.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-5-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM's 'gtod_is_based_on_tsc()' recognizes two clocksources: 'tsc' and
'hyperv_clocksource_tsc_page' and enables kvmclock in 'masterclock'
mode when either is in use. Transform 'sys_clocksource_is_tsc()' into
'sys_clocksource_is_based_on_tsc()' to support the later. This affects
two tests: kvm_clock_test and vmx_nested_tsc_scaling_test, both seem
to work well when system clocksource is 'hyperv_clocksource_tsc_page'.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-4-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Despite its name, system_has_stable_tsc() just checks that system
clocksource is 'tsc'; this can now be done with generic
sys_clocksource_is_tsc().
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-3-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Several existing x86 selftests need to check that the underlying system
clocksource is TSC or based on TSC but every test implements its own
check. As a first step towards unification, extract check_clocksource()
from kvm_clock_test and split it into two functions: arch-neutral
'sys_get_cur_clocksource()' and x86-specific 'sys_clocksource_is_tsc()'.
Fix a couple of pre-existing issues in kvm_clock_test: memory leakage in
check_clocksource() and using TEST_ASSERT() instead of TEST_REQUIRE().
The change also makes the test fail when system clocksource can't be read
from sysfs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-2-vkuznets@redhat.com
[sean: eliminate if-elif pattern just to set a bool true]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Currently they are incorrectly listed
in TEST_PROGS_EXTENDED so rename the variable.
Fixes: c085dbfb1c ("selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED")
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-6-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Move those utility scripts to
TEST_FILES.
Fixes: 1751eb42dd ("selftests: net: use TEST_PROGS_EXTENDED")
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Fixes: b99ac18411 ("kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile")
Fixes: f5173fe3e1 ("selftests: net: included needed helper in the install targets")
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-5-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
setup_loopback.sh and net_helper.sh are meant to be sourced from other
scripts, not executed directly. Therefore, remove the executable bits from
those files' permissions.
This change is similar to commit 49078c1b80 ("selftests: forwarding:
Remove executable bits from lib.sh")
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Fixes: 3bdd9fd29c ("selftests/net: synchronize udpgro tests' tx and rx connection")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-4-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of the test_LAG_cleanup() function is to check that some
hardware addresses are removed from underlying devices after they have been
unenslaved. The test function simply checks that those addresses are not
present at the end. However, if the addresses were never added to begin
with due to some error in device setup, the test function currently passes.
This is a false positive since in that situation the test did not actually
exercise the intended functionality.
Add a check that the expected addresses are indeed present after device
setup. This makes the test function more robust.
I noticed this problem when running the team/dev_addr_lists.sh test on a
system without support for dummy and ipv6:
tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh
Error: Unknown device type.
Error: Unknown device type.
This program is not intended to be run as root.
RTNETLINK answers: Operation not supported
TEST: team cleanup mode lacp [ OK ]
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to commit dd2d40acdb ("selftests: bonding: Add more missing
config options"), add more networking-specific config options which are
needed for team device tests.
For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. Afterwards, the team device test passed.
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-2-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable inline bpf_kptr_xchg() test for RV64, and the test have passed as
show below:
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240130124659.670321-3-pulehui@huaweicloud.com
After recent changes, Coverity complained about inconsistent null checks
in kernel_supports() function:
kernel_supports(const struct bpf_object *obj, ...)
[...]
// var_compare_op: Comparing obj to null implies that obj might be null
if (obj && obj->gen_loader)
return true;
// var_deref_op: Dereferencing null pointer obj
if (obj->token_fd)
return feat_supported(obj->feat_cache, feat_id);
[...]
- The original null check was introduced by commit [0], which introduced
a call `kernel_supports(NULL, ...)` in function bump_rlimit_memlock();
- This call was refactored to use `feat_supported(NULL, ...)` in commit [1].
Looking at all places where kernel_supports() is called:
- There is either `obj->...` access before the call;
- Or `obj` comes from `prog->obj` expression, where `prog` comes from
enumeration of programs in `obj`;
- Or `obj` comes from `prog->obj`, where `prog` is a parameter to one
of the API functions:
- bpf_program__attach_kprobe_opts;
- bpf_program__attach_kprobe;
- bpf_program__attach_ksyscall.
Assuming correct API usage, it appears that `obj` can never be null when
passed to kernel_supports(). Silence the Coverity warning by removing
redundant null check.
[0] e542f2c4cd ("libbpf: Auto-bump RLIMIT_MEMLOCK if kernel needs it for BPF")
[1] d6dd1d4936 ("libbpf: Further decouple feature checking logic from bpf_object")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240131212615.20112-1-eddyz87@gmail.com
Extend the ynl doc generator to include type information for struct
members, ignoring the pad type.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-13-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make it possible for struct definitions to reference other struct
definitions ofr binary members. For example, the tbf qdisc uses this
struct definition for its parms attribute:
-
name: tc-tbf-qopt
type: struct
members:
-
name: rate
type: binary
struct: tc-ratespec
-
name: peakrate
type: binary
struct: tc-ratespec
-
name: limit
type: u32
-
name: buffer
type: u32
-
name: mtu
type: u32
This adds the necessary schema changes and adds nested struct encoding
and decoding to ynl.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-11-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The formatted_string() class method was in NlAttr so that it could be
accessed by NlAttr.as_struct(). Now that as_struct() has been removed,
move formatted_string() to YnlFamily as an internal helper method.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-10-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the _fixed_header_size() method to be _struct_size() so that
naming is consistent with _encode_struct() and _decode_struct().
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-9-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
_decode_fixed_header() and NlAttr.as_struct() both implemented struct
decoding logic. Deduplicate the code into newly named _decode_struct()
method.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-8-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for defaulting binary byte arrays to all zeros as well as
defaulting scalar values to 0 when encoding input parameters.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add sub-message encoding to ynl. This makes it possible to create
tc qdiscs and other polymorphic netlink objects.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-6-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the fixed header encoding into a separate _encode_struct method
so that it can be reused for fixed headers in sub-messages and for
encoding structs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sub-message selectors could only be resolved using values from the
current nest level. Enable value lookup in outer scopes by using
collections.ChainMap to implement an ordered lookup from nested to
outer scopes.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ynl cli currently emits python pretty printed structures which is
hard to consume. Add a new --output-json argument to emit JSON.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Running fcnal-test.sh script with -P argument is causing test failures:
$ ./fcnal-test.sh -t ping -P
TEST: ping out - ns-B IP [ OK ]
hit enter to continue, 'q' to quit
fcnal-test.sh: line 106: [: ping: integer expression expected
TEST: out, [FAIL]
expected rc ping; actual rc 0
hit enter to continue, 'q' to quit
The test functions use local variable 'a' for addresses and
then log_test is also using 'a' without a local declaration.
Fix by declaring a local variable and using 'ans' (for answer)
in the read.
Signed-off-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240130154327.33848-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running the pmtu.sh via the kselftest infra, accessing
/dev/stdout gives unexpected results:
# dd: failed to open '/dev/stdout': Device or resource busy
# TEST: IPv4, bridged vxlan4: PMTU exceptions [FAIL]
Let dd use directly the standard output to fix the above:
# TEST: IPv4, bridged vxlan4: PMTU exceptions - nexthop objects [ OK ]
Fixes: 136a1b434b ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/23d7592c5d77d75cff9b34f15c227f92e911c2ae.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pmtu.sh test tries to detect the tunnel protocols available
in the running kernel and properly skip the unsupported cases.
In a few more complex setup, such detection is unsuccessful, as
the script currently ignores some intermediate error code at
setup time.
Before:
# which: no nettest in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin)
# TEST: vti6: PMTU exceptions (ESP-in-UDP) [FAIL]
# PMTU exception wasn't created after creating tunnel exceeding link layer MTU
# ./pmtu.sh: line 931: kill: (7543) - No such process
# ./pmtu.sh: line 931: kill: (7544) - No such process
After:
# xfrm4 not supported
# TEST: vti4: PMTU exceptions [SKIP]
Fixes: ece1278a9b ("selftests: net: add ESP-in-UDP PMTU test")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/cab10e75fda618e6fff8c595b632f47db58b9309.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mentioned test uses a few Kconfig still missing the
net config, add them.
Before:
# Error: Specified qdisc kind is unknown.
# Error: Specified qdisc kind is unknown.
# Error: Qdisc not classful.
# We have an error talking to the kernel
# Error: Qdisc not classful.
# We have an error talking to the kernel
# policy_routing not supported
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [SKIP]
After:
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [ OK ]
Fixes: ec730c3e1f ("selftest: net: Test IPv4 PMTU exceptions with DSCP and ECN")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/8d27bf6762a5c7b3acc457d6e6872c533040f9c1.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit marks kfuncs as such inside the .BTF_ids section. The upshot
of these annotations is that we'll be able to automatically generate
kfunc prototypes for downstream users. The process is as follows:
1. In source, use BTF_KFUNCS_START/END macro pair to mark kfuncs
2. During build, pahole injects into BTF a "bpf_kfunc" BTF_DECL_TAG for
each function inside BTF_KFUNCS sets
3. At runtime, vmlinux or module BTF is made available in sysfs
4. At runtime, bpftool (or similar) can look at provided BTF and
generate appropriate prototypes for functions with "bpf_kfunc" tag
To ensure future kfunc are similarly tagged, we now also return error
inside kfunc registration for untagged kfuncs. For vmlinux kfuncs,
we also WARN(), as initcall machinery does not handle errors.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/e55150ceecbf0a5d961e608941165c0bee7bc943.1706491398.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the test is racy and seems to not pass anymore.
In order to rectify it, aim on TCP_TW_RST.
Doesn't seem way too good with this sleep() part, but it seems as
a reasonable compromise for the test. There is a plan in-line comment on
how-to improve it, going to do it on the top, at this moment I want it
to run on netdev/patchwork selftests dashboard.
It also slightly changes tcp_ao-lib in order to get SO_ERROR propagated
to test_client_verify() return value.
Fixes: c6df7b2361 ("selftests/net: Add TCP-AO RST test")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-3-d190430a6c60@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the names of (struct test_key) members didn't reflect whether the key
was used for TX or RX, the verification for the counters was done
incorrectly for asymmetrical selftests.
Rename these with _tx appendix and fix checks in verify_counters().
While at it, as the checks are now correct, introduce skip_counters_checks,
which is intended for tests where it's expected that a key that was set
with setsockopt(sk, IPPROTO_TCP, TCP_AO_INFO, ...) might had no chance
of getting used on the wire.
Fixes the following failures, exposed by the previous commit:
> not ok 51 server: Check current != rnext keys set before connect(): Counter pkt_good was expected to increase 0 => 0 for key 132:5
> not ok 52 server: Check current != rnext keys set before connect(): Counter pkt_good was not expected to increase 0 => 21 for key 137:10
>
> not ok 63 server: Check current flapping back on peer's RnextKey request: Counter pkt_good was expected to increase 0 => 0 for key 132:5
> not ok 64 server: Check current flapping back on peer's RnextKey request: Counter pkt_good was not expected to increase 0 => 40 for key 137:10
Cc: Mohammad Nassiri <mnassiri@ciena.com>
Fixes: 3c3ead5556 ("selftests/net: Add TCP-AO key-management test")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-2-d190430a6c60@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The end_server() function only operates in the server thread
and always takes an accept socket instead of a listen socket as
its input argument. To align with this, invert the boolean values
used when calling verify_counters() within the end_server() function.
As a result of this typo, the test didn't correctly check for
the non-symmetrical scenario, where i.e. peer-A uses a key <100:200>
to send data, but peer-B uses another key <105:205> to send its data.
So, in simple words, different keys for TX and RX.
Fixes: 3c3ead5556 ("selftests/net: Add TCP-AO key-management test")
Signed-off-by: Mohammad Nassiri <mnassiri@ciena.com>
Link: https://lore.kernel.org/all/934627c5-eebb-4626-be23-cfb134c01d1a@arista.com/
[amended 'Fixes' tag, added the issue description and carried-over to lkml]
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-1-d190430a6c60@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test sends packets and compares enqueue, transmit and Ack
timestamps with expected values. It installs netem delays to increase
latency between these points.
The test proves flaky in virtual environment (vng). Increase the
delays to reduce variance. Scale measurement tolerance accordingly.
Time sensitive tests are difficult to calibrate. Increasing delays 10x
also increases runtime 10x, for one. And it may still prove flaky at
some rate.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240127023212.3746239-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After a recent change in the vmtest runner, this test started failing
sporadically.
Investigation showed that this test was subject to race condition which
got exacerbated after the vm runner change. The symptoms being that the
logic that waited for an ICMPv4 packet is naive and will break if 5 or
more non-ICMPv4 packets make it to tap0.
When ICMPv6 is enabled, the kernel will generate traffic such as ICMPv6
router solicitation...
On a system with good performance, the expected ICMPv4 packet would very
likely make it to the network interface promptly, but on a system with
poor performance, those "guarantees" do not hold true anymore.
Given that the test is IPv4 only, this change disable IPv6 in the test
netns by setting `net.ipv6.conf.all.disable_ipv6` to 1.
This essentially leaves "ping" as the sole generator of traffic in the
network namespace.
If this test was to be made IPv6 compatible, the logic in
`wait_for_packet` would need to be modified.
In more details...
At a high level, the test does:
- create a new namespace
- in `setup_redirect_target` set up lo, tap0, and link_err interfaces as
well as add 2 routes that attaches ingress/egress sections of
`test_lwt_redirect.bpf.o` to the xmit path.
- in `send_and_capture_test_packets` send an ICMP packet and read off
the tap interface (using `wait_for_packet`) to check that a ICMP packet
with the right size is read.
`wait_for_packet` will try to read `max_retry` (5) times from the tap0
fd looking for an ICMPv4 packet matching some criteria.
The problem is that when we set up the `tap0` interface, because IPv6 is
enabled by default, traffic such as Router solicitation is sent through
tap0, as in:
# tcpdump -r /tmp/lwt_redirect.pc
reading from file /tmp/lwt_redirect.pcap, link-type EN10MB (Ethernet)
04:46:23.578352 IP6 :: > ff02::1:ffc0:4427: ICMP6, neighbor solicitation, who has fe80::fcba:dff:fec0:4427, length 32
04:46:23.659522 IP6 :: > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28
04:46:24.389169 IP 10.0.0.1 > 20.0.0.9: ICMP echo request, id 122, seq 1, length 108
04:46:24.618599 IP6 fe80::fcba:dff:fec0:4427 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28
04:46:24.619985 IP6 fe80::fcba:dff:fec0:4427 > ff02::2: ICMP6, router solicitation, length 16
04:46:24.767326 IP6 fe80::fcba:dff:fec0:4427 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28
04:46:28.936402 IP6 fe80::fcba:dff:fec0:4427 > ff02::2: ICMP6, router solicitation, length 16
If `wait_for_packet` sees 5 non-ICMPv4 packets, it will return 0, which is what we see in:
2024-01-31T03:51:25.0336992Z test_lwt_redirect_run:PASS:netns_create 0 nsec
2024-01-31T03:51:25.0341309Z open_netns:PASS:malloc token 0 nsec
2024-01-31T03:51:25.0344844Z open_netns:PASS:open /proc/self/ns/net 0 nsec
2024-01-31T03:51:25.0350071Z open_netns:PASS:open netns fd 0 nsec
2024-01-31T03:51:25.0353516Z open_netns:PASS:setns 0 nsec
2024-01-31T03:51:25.0356560Z test_lwt_redirect_run:PASS:setns 0 nsec
2024-01-31T03:51:25.0360140Z open_tuntap:PASS:open(/dev/net/tun) 0 nsec
2024-01-31T03:51:25.0363822Z open_tuntap:PASS:ioctl(TUNSETIFF) 0 nsec
2024-01-31T03:51:25.0367402Z open_tuntap:PASS:fcntl(O_NONBLOCK) 0 nsec
2024-01-31T03:51:25.0371167Z setup_redirect_target:PASS:open_tuntap 0 nsec
2024-01-31T03:51:25.0375180Z setup_redirect_target:PASS:if_nametoindex 0 nsec
2024-01-31T03:51:25.0379929Z setup_redirect_target:PASS:ip link add link_err type dummy 0 nsec
2024-01-31T03:51:25.0384874Z setup_redirect_target:PASS:ip link set lo up 0 nsec
2024-01-31T03:51:25.0389678Z setup_redirect_target:PASS:ip addr add dev lo 10.0.0.1/32 0 nsec
2024-01-31T03:51:25.0394814Z setup_redirect_target:PASS:ip link set link_err up 0 nsec
2024-01-31T03:51:25.0399874Z setup_redirect_target:PASS:ip link set tap0 up 0 nsec
2024-01-31T03:51:25.0407731Z setup_redirect_target:PASS:ip route add 10.0.0.0/24 dev link_err encap bpf xmit obj test_lwt_redirect.bpf.o sec redir_ingress 0 nsec
2024-01-31T03:51:25.0419105Z setup_redirect_target:PASS:ip route add 20.0.0.0/24 dev link_err encap bpf xmit obj test_lwt_redirect.bpf.o sec redir_egress 0 nsec
2024-01-31T03:51:25.0427209Z test_lwt_redirect_normal:PASS:setup_redirect_target 0 nsec
2024-01-31T03:51:25.0431424Z ping_dev:PASS:if_nametoindex 0 nsec
2024-01-31T03:51:25.0437222Z send_and_capture_test_packets:FAIL:wait_for_epacket unexpected wait_for_epacket: actual 0 != expected 1
2024-01-31T03:51:25.0448298Z (/tmp/work/bpf/bpf/tools/testing/selftests/bpf/prog_tests/lwt_redirect.c:175: errno: Success) test_lwt_redirect_normal egress test fails
2024-01-31T03:51:25.0457124Z close_netns:PASS:setns 0 nsec
When running in a VM which potential resource contrains, the odds that calling
`ping` is not scheduled very soon after bringing `tap0` up increases,
and with this the chances to get our ICMP packet pushed to position 6+
in the network trace.
To confirm this indeed solves the issue, I ran the test 100 times in a
row with:
errors=0
successes=0
for i in `seq 1 100`
do
./test_progs -t lwt_redirect/lwt_redirect_normal
if [ $? -eq 0 ]; then
successes=$((successes+1))
else
errors=$((errors+1))
fi
done
echo "successes: $successes/errors: $errors"
While this test would at least fail a couple of time every 10 runs, here
it ran 100 times with no error.
Fixes: 43a7c3ef8a ("selftests/bpf: Add lwt_xmit tests for BPF_REDIRECT")
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240131053212.2247527-1-chantr4@gmail.com
l2_tos_ttl_inherit.sh verifies the inheritance of tos and ttl
for GRETAP, VXLAN and GENEVE.
Before testing it checks if the required module is available
and if not skips the tests accordingly.
Currently only GRETAP and VXLAN are tested because the GENEVE
module is missing.
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Link: https://lore.kernel.org/r/20240130101157.196006-1-matthias.may@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test validates per-band packet limits in FQ. Packets are dropped
rather than enqueued if the limit for their band is reached.
This test is timing sensitive. It queues packets in FQ with a future
delivery time to fill the qdisc.
The test failed in a virtual environment (vng). Increase the delays
to make it more tolerant to environments with timing variance.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 25ae948b44 ("selftests/net: add lib.sh") added net/lib.sh to
contain code shared by tests under net/ and net/forwarding/. However, this
caused issues with selftests from directories other than net/forwarding/,
in particular those under drivers/net/. Those issues were avoided in a
simple way by duplicating some content in commit 2114e83381 ("selftests:
forwarding: Avoid failures to source net/lib.sh").
In order to remove the duplicated content, restore the inclusion of
net/lib.sh from net/forwarding/lib.sh but with the following changes:
* net/lib.sh is imported through the net_forwarding_dir path
The original expression "source ../lib.sh" would look for lib.sh in the
directory above the script file's one, which did not work for tests under
drivers/net/.
* net/lib.sh is added to TEST_INCLUDES
Since net/forwarding/lib.sh now sources net/lib.sh, both of those files
must be exported along with tests which source net/forwarding/lib.sh.
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following code which is part of lib.sh:
relative_path="${BASH_SOURCE%/*}"
if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then
relative_path="."
fi
reimplements functionality that is part of `dirname`:
$ dirname ""
.
To avoid this duplication, replace "relative_path" by "net_forwarding_dir",
a new variable defined using dirname.
Furthermore, to avoid the potential confusion about what "relative_path" is
about (cwd, test script directory or test library directory), define
"net_forwarding_dir" as the absolute path to net/forwarding/.
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dsa tests which are symlinks of tests from net/forwarding/ (like
tc_actions.sh) become regular files after export (because `rsync
--copy-unsafe-links` is used) and expect to source lib.sh
(net/forwarding/lib.sh) from the same directory.
In the last patch of this series, net/forwarding/lib.sh will source lib.sh
from its parent directory (ie. net/lib.sh). This would not work for dsa
tests because net/lib.sh is not present under drivers/net/.
Since the tests in net/forwarding/ are not meant to be copied and run from
another directory, as a preparation for that last patch, replace the test
symlinks by a wrapper script which runs the original tests under
net/forwarding/. Following from that, the links to shared library scripts
in dsa/ are no longer used so remove them and add all the original files
needed from parent directories to TEST_INCLUDES.
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to avoid duplicated files when both the team and bonding tests are
exported together, add lag_lib.sh to TEST_INCLUDES.
Do likewise for net/forwarding/lib.sh regarding team and forwarding tests.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to avoid duplicated files when both the bonding and forwarding
tests are exported together, add net/forwarding/lib.sh to TEST_INCLUDES and
include it via its relative path.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some tests written in bash source other files in a parent directory. For
example, drivers/net/bonding/dev_addr_lists.sh sources
net/forwarding/lib.sh. If a subset of tests is exported and run outside the
source tree (for example by using `make -C tools/testing/selftests gen_tar
TARGETS="drivers/net/bonding"`), these other files must be made available
as well.
Commit ae108c48b5 ("selftests: net: Fix cross-tree inclusion of scripts")
addressed this problem by symlinking and copying the sourced files but this
only works for direct dependencies. Commit 25ae948b44 ("selftests/net:
add lib.sh") changed net/forwarding/lib.sh to source net/lib.sh. As a
result, that latter file must be included as well when the former is
exported. This was not handled and was reverted in commit 2114e83381
("selftests: forwarding: Avoid failures to source net/lib.sh"). In order to
allow reinstating the inclusion of net/lib.sh from net/forwarding/lib.sh,
add a mechanism to list dependent files in a new Makefile variable and
export them. This allows sourcing those files using the same expression
whether tests are run in-tree or exported.
Dependencies are not resolved recursively so transitive dependencies must
be listed in TEST_INCLUDES. For example, if net/forwarding/lib.sh sources
net/lib.sh; the Makefile related to a test that sources
net/forwarding/lib.sh from a parent directory must list:
TEST_INCLUDES := \
../../../net/forwarding/lib.sh \
../../../net/lib.sh
v2:
Fix rst syntax in Documentation/dev-tools/kselftest.rst (Jakub Kicinski)
v1 (from RFC):
* changed TEST_INCLUDES to take relative paths, like other TEST_* variables
(Vladimir Oltean)
* preserved common "$(MAKE) OUTPUT=... -C ... target" ordering in Makefile
(Petr Machata)
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the test cases in the test_bridge_backup_port.sh selftest relies
on a matchall classifier to drop unrelated traffic so that the Tx drop
counter on the VXLAN device will only be incremented as a result of
traffic generated by the test.
However, the configuration option for the matchall classifier is
missing from the configuration file which might explain the failures we
see in the netdev CI [1].
Fix by adding CONFIG_NET_CLS_MATCHALL to the configuration file.
[1]
# Backup nexthop ID - invalid IDs
# -------------------------------
[...]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
# TEST: IPv6 address family nexthop as backup nexthop [ OK ]
# TEST: No forwarding out of swp1 [ OK ]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
[...]
Fixes: b408453053 ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240129123703.1857843-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use more ergonomic bpf_core_cast() macro instead of bpf_rdonly_cast() in
selftests code.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240130212023.183765-3-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add bpf_core_cast() macro that wraps bpf_rdonly_cast() kfunc. It's more
ergonomic than kfunc, as it automatically extracts btf_id with
bpf_core_type_id_kernel(), and works with type names. It also casts result
to (T *) pointer. See the definition of the macro, it's self-explanatory.
libbpf declares bpf_rdonly_cast() extern as __weak __ksym and should be
safe to not conflict with other possible declarations in user code.
But we do have a conflict with current BPF selftests that declare their
externs with first argument as `void *obj`, while libbpf opts into more
permissive `const void *obj`. This causes conflict, so we fix up BPF
selftests uses in the same patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240130212023.183765-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This kselftest fixes update for Linux 6.8-rc3 consists of three
fixes to livepatch, rseq, and seccomp tests.
-----BEGIN PGP SIGNATURE-----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=0a0Q
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Three fixes to livepatch, rseq, and seccomp tests"
* tag 'linux_kselftest-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest/seccomp: Report each expectation we assert as a KTAP test
kselftest/seccomp: Use kselftest output functions for benchmark
selftests/livepatch: fix and refactor new dmesg message code
selftests/rseq: Do not skip !allowed_cpus for mm_cid
open_path_or_exit() is used for '/dev/kvm', '/dev/sev', and
'/sys/module/%s/parameters/%s' and skipping test when the entry is missing
is completely reasonable. Other errors, however, may indicate a real issue
which is easy to miss. E.g. when 'hyperv_features' test was entering an
infinite loop the output was:
./hyperv_features
Testing access to Hyper-V specific MSRs
1..0 # SKIP - /dev/kvm not available (errno: 24)
and this can easily get overlooked.
Keep ENOENT case 'special' for skipping tests and fail when open() results
in any other errno.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240129085847.2674082-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When X86_FEATURE_INVTSC is missing, guest_test_msrs_access() was supposed
to skip testing dependent Hyper-V invariant TSC feature. Unfortunately,
'continue' does not lead to that as stage is not incremented. Moreover,
'vm' allocated with vm_create_with_one_vcpu() is not freed and the test
runs out of available file descriptors very quickly.
Fixes: bd827bd775 ("KVM: selftests: Test Hyper-V invariant TSC control")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240129085847.2674082-1-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Delete the AMX's tests "stage" counter, as the counter is no longer used,
which makes clang unhappy:
x86_64/amx_test.c:224:6: error: variable 'stage' set but not used
int stage, ret;
^
1 error generated.
Note, "stage" was never really used, it just happened to be dumped out by
a (failed) assertion on run->exit_reason, i.e. the AMX test has no concept
of stages, the code was likely copy+pasted from a different test.
Fixes: c96f57b080 ("KVM: selftests: Make vCPU exit reason test assertion common")
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20240109220302.399296-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231206170241.82801-12-ajones@ventanamicro.com
[sean: keep the newline in the "tsc\n" strncmp()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a bunch of test cases validating behavior of __arg_trusted and its
combination with __arg_nullable tag. We also validate CO-RE flavor
support by kernel for __arg_trusted args.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240130000648.2144827-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add __arg_trusted to annotate global func args that accept trusted
PTR_TO_BTF_ID arguments.
Also add __arg_nullable to combine with __arg_trusted (and maybe other
tags in the future) to force global subprog itself (i.e., callee) to do
NULL checks, as opposed to default non-NULL semantics (and thus caller's
responsibility to ensure non-NULL values).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240130000648.2144827-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The seccomp benchmark test makes a number of checks on the performance it
measures and logs them to the output but does so in a custom format which
none of the automated test runners understand meaning that the chances that
anyone is paying attention are slim. Let's additionally log each result in
KTAP format so that automated systems parsing the test output will see each
comparison as a test case. The original logs are left in place since they
provide the actual numbers for analysis.
As part of this rework the flow for the main program so that when we skip
tests we still log all the tests we skip, this is because the standard KTAP
headers and footers include counts of the number of expected and run tests.
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In preparation for trying to output the test results themselves in TAP
format rework all the prints in the benchmark to use the kselftest output
functions. The uses of system() all produce single line output so we can
avoid having to deal with fully managing the child process and continue to
use system() by simply printing an empty message before we invoke system().
We also leave one printf() used to complete a line of output in place.
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The livepatching kselftests rely on comparing expected vs. observed
dmesg output. After each test, new dmesg entries are determined by the
'comm' utility comparing a saved, pre-test copy of dmesg to post-test
dmesg output.
Alexander reports that the 'comm --nocheck-order -13' invocation used by
the tests can be confused when dmesg entry timestamps vary in magnitude
(ie, "[ 98.820331]" vs. "[ 100.031067]"), in which case, additional
messages are reported as new. The unexpected entries then spoil the
test results.
Instead of relying on 'comm' or 'diff' to determine new testing dmesg
entries, refactor the code:
- pre-test : log a unique canary dmesg entry
- test : run tests, log messages
- post-test : filter dmesg starting from pre-test message
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Closes: https://lore.kernel.org/live-patching/ZYAimyPYhxVA9wKg@li-008a6a4c-3549-11b2-a85c-c5cc2836eea2.ibm.com/
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Clang supports enabling/disabling certain conversion diagnostics via
the -W[no-]compare-distinct-pointer-types command line options.
Disabling this warning is required by some BPF selftests due to
-Werror. Until very recently GCC would emit these warnings
unconditionally, which was a problem for gcc-bpf, but we added support
for the command-line options to GCC upstream [1].
This patch moves the -Wno-cmopare-distinct-pointer-types from
CLANG_CFLAGS to BPF_CFLAGS in selftests/bpf/Makefile so the option
is also used in gcc-bpf builds, not just in clang builds.
Tested in bpf-next master.
No regressions.
[1] https://gcc.gnu.org/pipermail/gcc-patches/2023-August/627769.html
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240130113624.24940-1-jose.marchesi@oracle.com
A few BPF selftests perform type punning and they may break strict
aliasing rules, which are exploited by both GCC and clang by default
while optimizing. This can lead to broken compiled programs.
This patch disables strict aliasing for these particular tests, by
mean of the -fno-strict-aliasing command line option. This will make
sure these tests are optimized properly even if some strict aliasing
rule gets violated.
After this patch, GCC is able to build all the selftests without
warning about potential strict aliasing issue.
bpf@vger discussion on strict aliasing and BPF selftests:
https://lore.kernel.org/bpf/bae1205a-b6e5-4e46-8e20-520d7c327f7a@linux.dev/T/#t
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/bae1205a-b6e5-4e46-8e20-520d7c327f7a@linux.dev
Link: https://lore.kernel.org/bpf/20240130110343.11217-1-jose.marchesi@oracle.com
To pick the changes from:
35e27a5744 ("fs: keep struct mnt_id_req extensible")
b4c2bea8ce ("add listmount(2) syscall")
46eae99ef7 ("add statmount(2) syscall")
That doesn't change anything in tools this time as nothing that is
harvested by the beauty scripts got changed:
$ ls -1 tools/perf/trace/beauty/*mount*sh
tools/perf/trace/beauty/fsmount.sh
tools/perf/trace/beauty/mount_flags.sh
tools/perf/trace/beauty/move_mount_flags.sh
$
This addresses this perf build warning.
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbkMiB7ZcOsLP2V5@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'Session topology' test currently fails with this message when
evlist__new_default() opens more than one event:
32: Session topology :
--- start ---
templ file: /tmp/perf-test-vv5YzZ
Using CPUID 0x00000000410fd070
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xb00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 4
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 5
non matching sample_type
FAILED tests/topology.c:73 can't get session
---- end ----
Session topology: FAILED!
This is because when re-opening the file and parsing the header, Perf
expects that any file that has more than one event has the sample ID
flag set. Perf record already sets the flag in a similar way when there
is more than one event, so add the same logic to evlist__new_default().
evlist__new_default() is only currently used in tests, so I don't
expect this change to have any other side effects. The other tests that
use it don't save and re-open the file so don't hit this issue.
The session topology test has been failing on Arm big.LITTLE platforms
since commit 251aa04024 ("perf parse-events: Wildcard most
"numeric" events") when evlist__new_default() started opening multiple
events for 'cycles'.
Fixes: 251aa04024 ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
[ This was failing as well on a Rocket Lake Refresh/14700k Intel hybrid system - Arnaldo ]
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Closes: https://lore.kernel.org/lkml/CAP-5=fWVQ-7ijjK3-w1q+k2WYVNHbAcejb-xY0ptbjRw476VKA@mail.gmail.com/
Link: https://lore.kernel.org/r/20240124094358.489372-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to get the changes from:
94ea9c0521 ("x86/headers: Replace #include <asm/export.h> with #include <linux/export.h>")
10f4c9b9a3 ("x86/asm: Fix build of UML with KASAN")
That addresses these perf tools build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/lkml/ZbkIKpKdNqOFdMwJ@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
1e536e1068 ("x86/cpu: Detect TDX partial write machine check erratum")
765a0542fd ("x86/virt/tdx: Detect TDX during kernel boot")
30fa92832f ("x86/CPU/AMD: Add ZenX generations flags")
04c3024560 ("x86/barrier: Do not serialize MSR accesses on AMD")
This causes these perf files to be rebuilt and brings some X86_FEATURE
that will be used when updating the copies of
tools/arch/x86/lib/mem{cpy,set}_64.S with the kernel sources:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The config file contains a partial kernel configuration to be used by
`virtme-configkernel --custom'. The presumption is that the config file
contains all Kconfig options needed by the selftests from the directory.
In net/forwarding/config, many are missing, which manifests as spurious
failures when running the selftests, with messages about unknown device
types, qdisc kinds or classifier actions. Add the missing configurations.
Tested the resulting configuration using virtme-ng as follows:
# vng -b -f tools/testing/selftests/net/forwarding/config
# vng --user root
(within the VM:)
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/025abded7ff9cea5874a7fe35dcd3fd41bf5e6ac.1706286755.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Modern OSes use iptables implementation with nf_tables as a backend,
e.g.:
$ iptables -V
iptables v1.8.8 (nf_tables)
Pablo points out that we need CONFIG_NFT_COMPAT to make that work,
otherwise we see a lot of:
Warning: Extension DNAT revision 0 not supported, missing kernel module?
with DNAT being just an example here, other modules we need
include udp, TTL, length etc.
Link: https://lore.kernel.org/r/20240126201308.2903602-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
or aren't considered appropriate for backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZbdSnwAKCRDdBJ7gKXxA
jv49AQCY8eLOgE0L+25HZm99HleBwapbKJozcmsXgMPlgeFZHgEA8saExeL+Nzae
6ktxmGXoVw2t3FJ67Zr66VE3EyHVKAY=
=HWuo
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"22 hotfixes. 11 are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: thp_get_unmapped_area must honour topdown preference
mm: huge_memory: don't force huge page alignment on 32 bit
userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb
selftests/mm: ksm_tests should only MADV_HUGEPAGE valid memory
scs: add CONFIG_MMU dependency for vfree_atomic()
mm/memory: fix folio_set_dirty() vs. folio_mark_dirty() in zap_pte_range()
mm/huge_memory: fix folio_set_dirty() vs. folio_mark_dirty()
selftests/mm: Update va_high_addr_switch.sh to check CPU for la57 flag
selftests: mm: fix map_hugetlb failure on 64K page size systems
MAINTAINERS: supplement of zswap maintainers update
stackdepot: make fast paths lock-less again
stackdepot: add stats counters exported via debugfs
mm, kmsan: fix infinite recursion due to RCU critical section
mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again
selftests/mm: switch to bash from sh
MAINTAINERS: add man-pages git trees
mm: memcontrol: don't throttle dying tasks on memory.high
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE
uprobes: use pagesize-aligned virtual address when replacing pages
selftests/mm: mremap_test: fix build warning
...
As CONFIG_DEBUG_INFO_BTF is default off the existing "failed to find
valid kernel BTF" message makes diagnosing the kernel build issue somewhat
cryptic. Add a little more detail with the hope of helping users.
Before:
```
libbpf: failed to find valid kernel BTF
libbpf: Error loading vmlinux BTF: -3
```
After not accessible:
```
libbpf: kernel BTF is missing at '/sys/kernel/btf/vmlinux', was CONFIG_DEBUG_INFO_BTF enabled?
libbpf: failed to find valid kernel BTF
libbpf: Error loading vmlinux BTF: -3
```
After not readable:
```
libbpf: failed to read kernel BTF from (/sys/kernel/btf/vmlinux): -1
```
Closes: https://lore.kernel.org/bpf/CAP-5=fU+DN_+Y=Y4gtELUsJxKNDDCOvJzPHvjUVaUoeFAzNnig@mail.gmail.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240125231840.1647951-1-irogers@google.com
Certain BPF selftests contain code that, albeit being legal C, trigger
warnings in GCC that cannot be disabled. This is the case for example
for the tests
progs/btf_dump_test_case_bitfields.c
progs/btf_dump_test_case_namespacing.c
progs/btf_dump_test_case_packing.c
progs/btf_dump_test_case_padding.c
progs/btf_dump_test_case_syntax.c
which contain struct type declarations inside function parameter
lists. This is problematic, because:
- The BPF selftests are built with -Werror.
- The Clang and GCC compilers sometimes differ when it comes to handle
warnings. in the handling of warnings. One compiler may emit
warnings for code that the other compiles compiles silently, and one
compiler may offer the possibility to disable certain warnings, while
the other doesn't.
In order to overcome this problem, this patch modifies the
tools/testing/selftests/bpf/Makefile in order to:
1. Enable the possibility of specifing per-source-file extra CFLAGS.
This is done by defining a make variable like:
<source-filename>-CFLAGS := <whateverflags>
And then modifying the proper Make rule in order to use these flags
when compiling <source-filename>.
2. Use the mechanism above to add -Wno-error to CFLAGS for the
following selftests:
progs/btf_dump_test_case_bitfields.c
progs/btf_dump_test_case_namespacing.c
progs/btf_dump_test_case_packing.c
progs/btf_dump_test_case_padding.c
progs/btf_dump_test_case_syntax.c
Note the corresponding -CFLAGS variables for these files are
defined only if the selftests are being built with GCC.
Note that, while compiler pragmas can generally be used to disable
particular warnings per file, this 1) is only possible for warning
that actually can be disabled in the command line, i.e. that have
-Wno-FOO options, and 2) doesn't apply to -Wno-error.
Tested in bpf-next master branch.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240127100702.21549-1-jose.marchesi@oracle.com
In s390, CI reported that the sock_iter_batch selftest
hits this error very often:
2024-01-26T16:56:49.3091804Z Bind /proc/self/ns/net -> /run/netns/sock_iter_batch_netns failed: No such file or directory
2024-01-26T16:56:49.3149524Z Cannot remove namespace file "/run/netns/sock_iter_batch_netns": No such file or directory
2024-01-26T16:56:49.3772213Z test_sock_iter_batch:FAIL:ip netns add sock_iter_batch_netns unexpected error: 256 (errno 0)
It happens very often in s390 but Manu also noticed it happens very
sparsely in other arch also.
It turns out the default dash shell does not recognize "&>"
as a redirection operator, so the command went to the background.
In the sock_iter_batch selftest, the "ip netns delete" went
into background and then race with the following "ip netns add"
command.
This patch replaces the "&> /dev/null" usage with ">/dev/null 2>&1"
and does this redirection in the SYS_NOFAIL macro instead of doing
it individually by its caller. The SYS_NOFAIL callers do not care
about failure, so it is no harm to do this redirection even if
some of the existing callers do not redirect to /dev/null now.
It touches different test files, so I skipped the Fixes tags
in this patch. Some of the changed tests do not use "&>"
but they use the SYS_NOFAIL, so these tests are also
changed to avoid doing its own redirection because
SYS_NOFAIL does it internally now.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240127025017.950825-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust PERF_EVENT type enforcement around __arg_ctx to match exactly
what kernel is doing.
Fixes: 76ec90a996 ("libbpf: warn on unexpected __arg_ctx type when rewriting BTF")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240125205510.3642094-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that feature detection code is in bpf-next tree, integrate __arg_ctx
kernel-side support into kernel_supports() framework.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240125205510.3642094-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20231206170241.82801-11-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20231206170241.82801-10-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20231206170241.82801-9-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231206170241.82801-8-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework the NX hugepage test's skip message regarding the magic token to
provide all of the necessary magic, and to very explicitly recommended
using the wrapper shell script.
Opportunistically remove an overzealous newline; splitting the
recommendation message across two lines of ~45 characters makes it much
harder to read than running out a single line to 98 characters.
Link: https://lore.kernel.org/r/20231129224042.530798-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
To pick the changes in these csets:
d8b0f54650 ("wire up syscalls for statmount/listmount")
5f42375904 ("LSM: wireup Linux Security Module syscalls")
Used in some architectures to create syscall tables.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbfMuAlUMRO9Hqa6@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZbahQwAKCRDfioYZHlFs
Z1VNAP0dz0rhIriILaAvRidYQWt/qtmhoaZswrVvEtY+q/orogD/d6eHChpRQKM2
Bg8ofjqLkaEEszx7VBVhOGodgaQnBA8=
=RUzU
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A build regression fix, a device compatibility fix, and an original
bug preventing creation of large (16 device) interleave sets:
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets"
* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region：Fix overflow issue in alloc_hpa()
cxl/pci: Skip irq features if MSI/MSI-X are not supported
tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
tools/testing/cxl: Disable "missing prototypes / declarations" warnings
As events are deduplicated by name, ensure PMU prefixes are always
used in metrics. Previously they may be missed on the first event in a
formula.
Update metric constraints for architectures with topdown l2 events.
Conversion script updated in:
https://github.com/intel/perfmon/pull/128
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/lkml/ZZam-EG-UepcXtWw@kernel.org/
Link: https://lore.kernel.org/r/20240104231903.775717-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZbQV+gAKCRDbK58LschI
g2OeAP0VvhZS9SPiS+/AMAFuw2W1BkMrFNbfBTc3nzRnyJSmNAD+NG4CLLJvsKI9
olu7VC20B8pLTGLUGIUSwqnjOC+Kkgc=
=wVMl
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-26
We've added 107 non-merge commits during the last 4 day(s) which contain
a total of 101 files changed, 6009 insertions(+), 1260 deletions(-).
The main changes are:
1) Add BPF token support to delegate a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application. With addressed changes from Christian
and Linus' reviews, from Andrii Nakryiko.
2) Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type,
from Kui-Feng Lee.
3) Add support for retrieval of cookies for perf/kprobe multi links,
from Jiri Olsa.
4) Bigger batch of prep-work for the BPF verifier to eventually support
preserving boundaries and tracking scalars on narrowing fills,
from Maxim Mikityanskiy.
5) Extend the tc BPF flavor to support arbitrary TCP SYN cookies to help
with the scenario of SYN floods, from Kuniyuki Iwashima.
6) Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects,
from Hou Tao.
7) Extend BPF verifier to track aligned ST stores as imprecise spilled
registers, from Yonghong Song.
8) Several fixes to BPF selftests around inline asm constraints and
unsupported VLA code generation, from Jose E. Marchesi.
9) Various updates to the BPF IETF instruction set draft document such
as the introduction of conformance groups for instructions,
from Dave Thaler.
10) Fix BPF verifier to make infinite loop detection in is_state_visited()
exact to catch some too lax spill/fill corner cases,
from Eduard Zingerman.
11) Refactor the BPF verifier pointer ALU check to allow ALU explicitly
instead of implicitly for various register types, from Hao Sun.
12) Fix the flaky tc_redirect_dtime BPF selftest due to slowness
in neighbor advertisement at setup time, from Martin KaFai Lau.
13) Change BPF selftests to skip callback tests for the case when the
JIT is disabled, from Tiezhu Yang.
14) Add a small extension to libbpf which allows to auto create
a map-in-map's inner map, from Andrey Grafin.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (107 commits)
selftests/bpf: Add missing line break in test_verifier
bpf, docs: Clarify definitions of various instructions
bpf: Fix error checks against bpf_get_btf_vmlinux().
bpf: One more maintainer for libbpf and BPF selftests
selftests/bpf: Incorporate LSM policy to token-based tests
selftests/bpf: Add tests for LIBBPF_BPF_TOKEN_PATH envvar
libbpf: Support BPF token path setting through LIBBPF_BPF_TOKEN_PATH envvar
selftests/bpf: Add tests for BPF object load with implicit token
selftests/bpf: Add BPF object loading tests with explicit token passing
libbpf: Wire up BPF token support at BPF object level
libbpf: Wire up token_fd into feature probing logic
libbpf: Move feature detection code into its own file
libbpf: Further decouple feature checking logic from bpf_object
libbpf: Split feature detectors definitions from cached results
selftests/bpf: Utilize string values for delegate_xxx mount options
bpf: Support symbolic BPF FS delegation mount options
bpf: Fail BPF_TOKEN_CREATE if no delegation option was set on BPF FS
bpf,selinux: Allocate bpf_security_struct per BPF token
selftests/bpf: Add BPF token-enabled tests
libbpf: Add BPF token support to bpf_prog_load() API
...
====================
Link: https://lore.kernel.org/r/20240126215710.19855-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix the handling of scaling_max/min_freq sysfs attributes in the AMD
P-state cpufreq driver (Mario Limonciello).
- Make the intel_pstate cpufreq driver avoid unnecessary computation of
the HWP performance level corresponding to a given frequency in the
cases when it is known already, which also helps to avoid reducing
the maximum CPU capacity artificially on some systems (Rafael J.
Wysocki).
- Fix compilation of the cpupower utility when CFLAGS is passed as a
make argument for cpupower, but it does not take effect as expected
due to mishandling (Stanley Chan).
-----BEGIN PGP SIGNATURE-----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=4dQr
-----END PGP SIGNATURE-----
Merge tag 'pm-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq drivers and the cpupower utility.
Specifics:
- Fix the handling of scaling_max/min_freq sysfs attributes in the
AMD P-state cpufreq driver (Mario Limonciello)
- Make the intel_pstate cpufreq driver avoid unnecessary computation
of the HWP performance level corresponding to a given frequency in
the cases when it is known already, which also helps to avoid
reducing the maximum CPU capacity artificially on some systems
(Rafael J. Wysocki)
- Fix compilation of the cpupower utility when CFLAGS is passed as a
make argument for cpupower, but it does not take effect as expected
due to mishandling (Stanley Chan)"
* tag 'pm-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Fix setting scaling max/min freq values
cpufreq: intel_pstate: Refine computation of P-state for given frequency
tools cpupower bench: Override CFLAGS assignments
The gro.sh test-case relay on the gro_flush_timeout to ensure
that all the segments belonging to any given batch are properly
aggregated.
The other end, the sender is a user-space program transmitting
each packet with a separate write syscall. A busy host and/or
stracing the sender program can make the relevant segments reach
the GRO engine after the flush timeout triggers.
Give the GRO flush timeout more slack, to avoid sporadic self-tests
failures.
Fixes: 9af771d2ec ("selftests/net: allow GRO coalesce test on veth")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/bffec2beab3a5672dd13ecabe4fad81d2155b367.1706206101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yonghong Song