These have all been converted to fsck/inconsistent errors
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The device remove test was sporadically failing, because we hadn't
finished dropping btree sector counts for the device when
bch2_replicas_gc2() was called - mainly due to in flight journal writes.
We don't yet have a good mechanism for flushing the counts that
correspend to open journal entries yet.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
On transaction restart (-EINTR), we need to traverse all iterators.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes the bch2_read_retry_nodecode() path, we were resubmitting a
bio without properly reinitializing it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, when doing multiple update in the same transaction commit
that overwrote each other, we relied on doing the updates in the same
order as the bch2_trans_update() calls in order to get the correct
result. But that wasn't correct for triggers; bch2_trans_mark_update()
when marking overwrites would do the wrong thing because it hadn't seen
the update that was being overwritten.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The trigger flags really belong with individual btree_insert_entries,
not the transaction commit flags - this splits out those flags and
unifies them with the BCH_BUCKET_MARK flags. Todo - split out
btree_trigger.c from buckets.c
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This should be private to btree_update_leaf.c, and we might end up
removing it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Clean up a bit of duplicated code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, partial overwrites of existing extents were handled
implicitly by the btree code; when reading in a btree node, we'd do a
mergesort of the different bsets and detect and fix partially
overlapping extents during that mergesort.
That approach won't work with snapshots: this changes extents to work
like regular keys as far as the btree code is concerned, where a 0 size
KEY_TYPE_deleted whiteout will completely overwrite an existing extent.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Helps for preventing things from getting out of sync.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
op->end_io may free the op struct
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
BTREE_INSERT_LAZY_RW was added for this since this code was written; use
it instead.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This was causing a bug with transaction iterators overflowing; now, if
triggers have to be reexecuted we always return -EINTR and retry from
the start of the transaction.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
BTREE_INSERT_ATOMIC should really be the default mode, and there's not
that much code that doesn't need it - so this is prep work for getting
rid of the flag.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It needs to be called when we get -EINTR due to e.g. lock restart - this
fixes a transaction iterators overflow bug.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This assertion was wrong for interior nodes (and wasn't terribly useful
to begin with)
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The code that checked the current free space and waited if it was too
big was causing issues - btree node allocations do not increment the
write IO clock (perhaps they should); but more broadly the check
wouldn't run copygc at all until the device was mostly full, at which
point it might have to do a bunch of work.
This redoes that logic so that copygc starts to run earlier, smoothly
running more and more often as the device becomes closer to full.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In __bch2_sb_field_resize, when a field's old a new size was 0, we were
doing an invalid write just past the end of the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When disk space accounting was changed to be tracked by replicas entry,
the ioctl interface was never update: this patch finally does that.
Aditionally, the BCH_IOCTL_USAGE ioctl is now broken out into separate
ioctls for filesystem and device usage.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Timestamp updates on the directory during a link operation were cached.
This is inconsistent with other metadata operations such as rename, as
well as being less efficient.
Signed-off-by: Justin Husted <sigstop@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Normally the in memory i_size is always greater than or equal to i_size
on disk; this doesn't hold on filesystem error.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When traversing nodes and we've reached the end of the btree, the
current btree node will be NULL.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Long overdue cleanup - this converts btree_node_iter_large uses to
sort_iter.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're not really supposed to allocate from the same mempool more than
once.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The whiteout compaction path - as opposed to just dropping whiteouts -
is now only needed for extents, and soon will only be needed for extent
btree nodes in the old format.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
More prep work for snapshots: extents will soon be using
KEY_TYPE_deleted for whiteouts, with 0 size. But we wen't be able to
keep these whiteouts with the rest of the extents in the btree node, due
to sorting invariants breaking.
We can deal with this by immediately moving the new whiteouts to the
unwritten whiteouts area - this just means those whiteouts won't be
sorted, so we need new code to sort them prior to merging them with the
rest of the keys to be written.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is prep work for snapshots: the algorithm in
bch2_extent_sort_fix_overlapping() will break when we have multiple
overlapping extents in unrelated snapshots - but, we'll be able to make
extents work like regular keys and use bch2_key_sort_fix_overlapping()
for extent btree nodes if we make a couple changes - the main one being
to always emit new extents when we partially overwrite an existing
(written) extent.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We were calling __btree_node_key_to_offset() on a key that wasn't in the
btree node.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Inline data extents + reflink is still broken
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
New helper function for setting incompatible feature bits
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Older versions of gcc refuse to compile it the other way
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This implements extents that have their data inline, in the value,
instead of the bkey value being pointers to the data - and the read and
write paths are updated to read from these new extent types and write
them out, when the write size is small enough.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This changes bch2_cut_front and bch2_cut_back so that they're able to
shorten the size of the value, and it also changes the extent update
path to update the accounting in the btree node when this happens.
When the size of the value is shortened, they zero out the space that's
no longer used, so it's interpreted as noops (as implemented in the last
patch).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
For upcoming inline data extents, we're going to need to be able to
shorten the value of existing bkeys in the btree - and to make that work
we're going to be able to need to pad out the space the value previously
took up with something.
This patch changes the various code that iterates over bkeys to handle
k->u64s == 0 as meaning "skip the next 8 bytes".
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This implements code for storing small bkeys on the stack and allocating
out of a mempool if they're too big.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The error path in bch2_write wasn't updated when the end_io callback was
added to bch_write_op.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
For security and conformance with other filesystems, the lost+found
directory should not be world or group accessible.
Signed-off-by: Justin Husted <sigstop@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is to fix a valgrind complaint - the code was correct, but too
tricky for valgrind to know that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Prep work for extents with inline data
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
