Both function names are a misnomer.
fpu__save() is actually about synchronizing the hardware register state
into the task's memory state so that either coredump or a math exception
handler can inspect the state at the time where the problem happens.
The function guarantees to preserve the register state, while "save" is a
common terminology for saving the current state so it can be modified and
restored later. This is clearly not the case here.
Rename it to fpu_sync_fpstate().
fpu__copy() is used to clone the current task's FPU state when duplicating
task_struct. While the register state is a copy the rest of the FPU state
is not.
Name it accordingly and remove the really pointless @src argument along
with the warning which comes along with it.
Nothing can ever copy the FPU state of a non-current task. It's clearly
just a consequence of arch_dup_task_struct(), but it makes no sense to
proliferate that further.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.196727450@linutronix.de
write_pkru() was originally used just to write to the PKRU register. It
was mercifully short and sweet and was not out of place in pgtable.h with
some other pkey-related code.
But, later work included a requirement to also modify the task XSAVE
buffer when updating the register. This really is more related to the
XSAVE architecture than to paging.
Move the read/write_pkru() to asm/pkru.h. pgtable.h won't miss them.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.102647114@linutronix.de
The copy functions for the independent features are horribly named and the
supervisor and independent part is just overengineered.
The point is that the supplied mask has either to be a subset of the
independent features or a subset of the task->fpu.xstate managed features.
Rewrite it so it checks for invalid overlaps of these areas in the caller
supplied feature mask. Rename it so it follows the new naming convention
for these operations. Mop up the function documentation.
This allows to use that function for other purposes as well.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20210623121455.004880675@linutronix.de
The salient feature of "dynamic" XSTATEs is that they are not part of the
main task XSTATE buffer. The fact that they are dynamically allocated is
irrelevant and will become quite confusing when user math XSTATEs start
being dynamically allocated. Rename them to "independent" because they
are independent of the main XSTATE code.
This is just a search-and-replace with some whitespace updates to keep
things aligned.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/1eecb0e4f3e07828ebe5d737ec77dc3b708fad2d.1623388344.git.luto@kernel.org
Link: https://lkml.kernel.org/r/20210623121454.911450390@linutronix.de
This is not a copy functionality. It restores the register state from the
supplied kernel buffer.
No functional changes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.716058365@linutronix.de
The FNSAVE support requires conditionals in quite some call paths because
FNSAVE reinitializes the FPU hardware. If the save has to preserve the FPU
register state then the caller has to conditionally restore it from memory
when FNSAVE is in use.
This also requires a conditional in context switch because the restore
avoidance optimization cannot work with FNSAVE. As this only affects 20+
years old CPUs there is really no reason to keep this optimization
effective for FNSAVE. It's about time to not optimize for antiques anymore.
Just unconditionally FRSTOR the save content to the registers and clean up
the conditionals all over the place.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.617369268@linutronix.de
A copy is guaranteed to leave the source intact, which is not the case when
FNSAVE is used as that reinitilizes the registers.
Save does not make such guarantees and it matches what this is about,
i.e. to save the state for a later restore.
Rename it to save_fpregs_to_fpstate().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.508853062@linutronix.de
Rename them to reflect that these functions deal with user space format
XSAVE buffers.
copy_kernel_to_xstate() -> copy_uabi_from_kernel_to_xstate()
copy_user_to_xstate() -> copy_sigframe_from_user_to_xstate()
Again a clear statement that these functions deal with user space ABI.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.318485015@linutronix.de
The function names for fnsave/fnrstor operations are horribly named and
a permanent source of confusion.
Rename:
copy_kernel_to_fregs() to frstor()
copy_fregs_to_user() to fnsave_to_user_sigframe()
copy_user_to_fregs() to frstor_from_user_sigframe()
so it's clear what these are doing. All these functions are really low
level wrappers around the equally named instructions, so mapping to the
documentation is just natural.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.223594101@linutronix.de
The function names for fxsave/fxrstor operations are horribly named and
a permanent source of confusion.
Rename:
copy_fxregs_to_kernel() to fxsave()
copy_kernel_to_fxregs() to fxrstor()
copy_fxregs_to_user() to fxsave_to_user_sigframe()
copy_user_to_fxregs() to fxrstor_from_user_sigframe()
so it's clear what these are doing. All these functions are really low
level wrappers around the equally named instructions, so mapping to the
documentation is just natural.
While at it, replace the static_cpu_has(X86_FEATURE_FXSR) with
use_fxsr() to be consistent with the rest of the code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.017863494@linutronix.de
The function names for xsave[s]/xrstor[s] operations are horribly named and
a permanent source of confusion.
Rename:
copy_xregs_to_user() to xsave_to_user_sigframe()
copy_user_to_xregs() to xrstor_from_user_sigframe()
so it's entirely clear what this is about. This is also a clear indicator
of the potentially different storage format because this is user ABI and
cannot use compacted format.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.924266705@linutronix.de
The function names for xsave[s]/xrstor[s] operations are horribly named and
a permanent source of confusion.
Rename:
copy_xregs_to_kernel() to os_xsave()
copy_kernel_to_xregs() to os_xrstor()
These are truly low level wrappers around the actual instructions
XSAVE[OPT]/XRSTOR and XSAVES/XRSTORS with the twist that the selection
based on the available CPU features happens with an alternative to avoid
conditionals all over the place and to provide the best performance for hot
paths.
The os_ prefix tells that this is the OS selected mechanism.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.830239347@linutronix.de
If the fast path of restoring the FPU state on sigreturn fails or is not
taken and the current task's FPU is active then the FPU has to be
deactivated for the slow path to allow a safe update of the tasks FPU
memory state.
With supervisor states enabled, this requires to save the supervisor state
in the memory state first. Supervisor states require XSAVES so saving only
the supervisor state requires to reshuffle the memory buffer because XSAVES
uses the compacted format and therefore stores the supervisor states at the
beginning of the memory state. That's just an overengineered optimization.
Get rid of it and save the full state for this case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.734561971@linutronix.de
This function is pointlessly global and a complete misnomer because it's
usage is related to both supervisor state checks and compacted format
checks. Remove it and just make the conditions check the XSAVES feature.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.425493349@linutronix.de
The only usecase for fpu__write_begin is the set() callback of regset, so
the function is pointlessly global.
Move it to the regset code and rename it to fpu_force_restore() which is
exactly decribing what the function does.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.328652975@linutronix.de
The function can only be used from the regset get() callbacks safely. So
there is no reason to have it globally exposed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.234942936@linutronix.de
When xsave with init state optimization is used then a component's state
in the task's xsave buffer can be stale when the corresponding feature bit
is not set.
fpregs_get() and xfpregs_get() invoke fpstate_sanitize_xstate() to update
the task's xsave buffer before retrieving the FX or FP state. That's just
duplicated code as copy_xstate_to_kernel() already handles this correctly.
Add a copy mode argument to the function which allows to restrict the state
copy to the FP and SSE features.
Also rename the function to copy_xstate_to_uabi_buf() so the name reflects
what it is doing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.805327286@linutronix.de
xstateregs_set() operates on a stopped task and tries to copy the provided
buffer into the task's fpu.state.xsave buffer.
Any error while copying or invalid state detected after copying results in
wiping the target task's FPU state completely including supervisor states.
That's just wrong. The caller supplied invalid data or has a problem with
unmapped memory, so there is absolutely no justification to corrupt the
target state.
Fix this with the following modifications:
1) If data has to be copied from userspace, allocate a buffer and copy from
user first.
2) Use copy_kernel_to_xstate() unconditionally so that header checking
works correctly.
3) Return on error without corrupting the target state.
This prevents corrupting states and lets the caller deal with the problem
it caused in the first place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.214903673@linutronix.de
They are only used in fpstate_init() and there is no point to have them in
a header just to make reading the code harder.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.023118522@linutronix.de
This function is really not doing what the comment advertises:
"Find supported xfeatures based on cpu features and command-line input.
This must be called after fpu__init_parse_early_param() is called and
xfeatures_mask is enumerated."
fpu__init_parse_early_param() does not exist anymore and the function just
returns a constant.
Remove it and fix the caller and get rid of further references to
fpu__init_parse_early_param().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121451.816404717@linutronix.de
Pick up dependent changes which either went mainline (x86/urgent is
based on -rc7 and that contains them) as urgent fixes and the current
x86/urgent branch which contains two more urgent fixes, so that the
bigger FPU rework can base off ontop.
Signed-off-by: Borislav Petkov <bp@suse.de>
The XSAVE init code initializes all enabled and supported components with
XRSTOR(S) to init state. Then it XSAVEs the state of the components back
into init_fpstate which is used in several places to fill in the init state
of components.
This works correctly with XSAVE, but not with XSAVEOPT and XSAVES because
those use the init optimization and skip writing state of components which
are in init state. So init_fpstate.xsave still contains all zeroes after
this operation.
There are two ways to solve that:
1) Use XSAVE unconditionally, but that requires to reshuffle the buffer when
XSAVES is enabled because XSAVES uses compacted format.
2) Save the components which are known to have a non-zero init state by other
means.
Looking deeper, #2 is the right thing to do because all components the
kernel supports have all-zeroes init state except the legacy features (FP,
SSE). Those cannot be hard coded because the states are not identical on all
CPUs, but they can be saved with FXSAVE which avoids all conditionals.
Use FXSAVE to save the legacy FP/SSE components in init_fpstate along with
a BUILD_BUG_ON() which reminds developers to validate that a newly added
component has all zeroes init state. As a bonus remove the now unused
copy_xregs_to_kernel_booting() crutch.
The XSAVE and reshuffle method can still be implemented in the unlikely
case that components are added which have a non-zero init state and no
other means to save them. For now, FXSAVE is just simple and good enough.
[ bp: Fix a typo or two in the text. ]
Fixes: 6bad06b768 ("x86, xsave: Use xsaveopt in context-switch path when supported")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210618143444.587311343@linutronix.de
When user space brings PKRU into init state, then the kernel handling is
broken:
T1 user space
xsave(state)
state.header.xfeatures &= ~XFEATURE_MASK_PKRU;
xrstor(state)
T1 -> kernel
schedule()
XSAVE(S) -> T1->xsave.header.xfeatures[PKRU] == 0
T1->flags |= TIF_NEED_FPU_LOAD;
wrpkru();
schedule()
...
pk = get_xsave_addr(&T1->fpu->state.xsave, XFEATURE_PKRU);
if (pk)
wrpkru(pk->pkru);
else
wrpkru(DEFAULT_PKRU);
Because the xfeatures bit is 0 and therefore the value in the xsave
storage is not valid, get_xsave_addr() returns NULL and switch_to()
writes the default PKRU. -> FAIL #1!
So that wrecks any copy_to/from_user() on the way back to user space
which hits memory which is protected by the default PKRU value.
Assumed that this does not fail (pure luck) then T1 goes back to user
space and because TIF_NEED_FPU_LOAD is set it ends up in
switch_fpu_return()
__fpregs_load_activate()
if (!fpregs_state_valid()) {
load_XSTATE_from_task();
}
But if nothing touched the FPU between T1 scheduling out and back in,
then the fpregs_state is still valid which means switch_fpu_return()
does nothing and just clears TIF_NEED_FPU_LOAD. Back to user space with
DEFAULT_PKRU loaded. -> FAIL #2!
The fix is simple: if get_xsave_addr() returns NULL then set the
PKRU value to 0 instead of the restrictive default PKRU value in
init_pkru_value.
[ bp: Massage in minor nitpicks from folks. ]
Fixes: 0cecca9d03 ("x86/fpu: Eager switch PKRU state")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210608144346.045616965@linutronix.de
switch_fpu_finish() checks current->mm as indicator for kernel threads.
That's wrong because kernel threads can temporarily use a mm of a user
process via kthread_use_mm().
Check the task flags for PF_KTHREAD instead.
Fixes: 0cecca9d03 ("x86/fpu: Eager switch PKRU state")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210608144345.912645927@linutronix.de
While digesting the XSAVE-related horrors which got introduced with
the supervisor/user split, the recent addition of ENQCMD-related
functionality got on the radar and turned out to be similarly broken.
update_pasid(), which is only required when X86_FEATURE_ENQCMD is
available, is invoked from two places:
1) From switch_to() for the incoming task
2) Via a SMP function call from the IOMMU/SMV code
#1 is half-ways correct as it hacks around the brokenness of get_xsave_addr()
by enforcing the state to be 'present', but all the conditionals in that
code are completely pointless for that.
Also the invocation is just useless overhead because at that point
it's guaranteed that TIF_NEED_FPU_LOAD is set on the incoming task
and all of this can be handled at return to user space.
#2 is broken beyond repair. The comment in the code claims that it is safe
to invoke this in an IPI, but that's just wishful thinking.
FPU state of a running task is protected by fregs_lock() which is
nothing else than a local_bh_disable(). As BH-disabled regions run
usually with interrupts enabled the IPI can hit a code section which
modifies FPU state and there is absolutely no guarantee that any of the
assumptions which are made for the IPI case is true.
Also the IPI is sent to all CPUs in mm_cpumask(mm), but the IPI is
invoked with a NULL pointer argument, so it can hit a completely
unrelated task and unconditionally force an update for nothing.
Worse, it can hit a kernel thread which operates on a user space
address space and set a random PASID for it.
The offending commit does not cleanly revert, but it's sufficient to
force disable X86_FEATURE_ENQCMD and to remove the broken update_pasid()
code to make this dysfunctional all over the place. Anything more
complex would require more surgery and none of the related functions
outside of the x86 core code are blatantly wrong, so removing those
would be overkill.
As nothing enables the PASID bit in the IA32_XSS MSR yet, which is
required to make this actually work, this cannot result in a regression
except for related out of tree train-wrecks, but they are broken already
today.
Fixes: 20f0afd1fb ("x86/mmu: Allocate/free a PASID")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/87mtsd6gr9.ffs@nanos.tec.linutronix.de
Signal frames do not have a fixed format and can vary in size when a number
of things change: supported XSAVE features, 32 vs. 64-bit apps, etc.
Add support for a runtime method for userspace to dynamically discover
how large a signal stack needs to be.
Introduce a new variable, max_frame_size, and helper functions for the
calculation to be used in a new user interface. Set max_frame_size to a
system-wide worst-case value, instead of storing multiple app-specific
values.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H.J. Lu <hjl.tools@gmail.com>
Link: https://lkml.kernel.org/r/20210518200320.17239-3-chang.seok.bae@intel.com
The remaining callers of kernel_fpu_begin() in 64-bit kernels don't use 387
instructions, so there's no need to sanitize the FPU state. Skip it to get
most of the performance we lost back.
Reported-by: Krzysztof Olędzki <ole@ans.pl>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/57f8841ccbf9f3c25a23196c888f5f6ec5887577.1611205691.git.luto@kernel.org
Currently, requesting kernel FPU access doesn't distinguish which parts of
the extended ("FPU") state are needed. This is nice for simplicity, but
there are a few cases in which it's suboptimal:
- The vast majority of in-kernel FPU users want XMM/YMM/ZMM state but do
not use legacy 387 state. These users want MXCSR initialized but don't
care about the FPU control word. Skipping FNINIT would save time.
(Empirically, FNINIT is several times slower than LDMXCSR.)
- Code that wants MMX doesn't want or need MXCSR initialized.
_mmx_memcpy(), for example, can run before CR4.OSFXSR gets set, and
initializing MXCSR will fail because LDMXCSR generates an #UD when the
aforementioned CR4 bit is not set.
- Any future in-kernel users of XFD (eXtended Feature Disable)-capable
dynamic states will need special handling.
Add a more specific API that allows callers to specify exactly what they
want.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl>
Link: https://lkml.kernel.org/r/aff1cac8b8fc7ee900cf73e8f2369966621b053f.1611205691.git.luto@kernel.org
Non RT kernels need to protect FPU against preemption and bottom half
processing. This is achieved by disabling bottom halfs via
local_bh_disable() which implictly disables preemption.
On RT kernels this protection mechanism is not sufficient because
local_bh_disable() does not disable preemption. It serializes bottom half
related processing via a CPU local lock.
As bottom halfs are running always in thread context on RT kernels
disabling preemption is the proper choice as it implicitly prevents bottom
half processing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201027101349.588965083@linutronix.de
There is no point in disabling preemption and then disabling bottom
halfs.
Just disabling bottom halfs is sufficient as it implicitly disables
preemption on !RT kernels.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201027101349.455380473@linutronix.de
called SEV by also encrypting the guest register state, making the
registers inaccessible to the hypervisor by en-/decrypting them on world
switches. Thus, it adds additional protection to Linux guests against
exfiltration, control flow and rollback attacks.
With SEV-ES, the guest is in full control of what registers the
hypervisor can access. This is provided by a guest-host exchange
mechanism based on a new exception vector called VMM Communication
Exception (#VC), a new instruction called VMGEXIT and a shared
Guest-Host Communication Block which is a decrypted page shared between
the guest and the hypervisor.
Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest so
in order for that exception mechanism to work, the early x86 init code
needed to be made able to handle exceptions, which, in itself, brings
a bunch of very nice cleanups and improvements to the early boot code
like an early page fault handler, allowing for on-demand building of the
identity mapping. With that, !KASLR configurations do not use the EFI
page table anymore but switch to a kernel-controlled one.
The main part of this series adds the support for that new exchange
mechanism. The goal has been to keep this as much as possibly
separate from the core x86 code by concentrating the machinery in two
SEV-ES-specific files:
arch/x86/kernel/sev-es-shared.c
arch/x86/kernel/sev-es.c
Other interaction with core x86 code has been kept at minimum and behind
static keys to minimize the performance impact on !SEV-ES setups.
Work by Joerg Roedel and Thomas Lendacky and others.
-----BEGIN PGP SIGNATURE-----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=toqi
-----END PGP SIGNATURE-----
Merge tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV-ES support from Borislav Petkov:
"SEV-ES enhances the current guest memory encryption support called SEV
by also encrypting the guest register state, making the registers
inaccessible to the hypervisor by en-/decrypting them on world
switches. Thus, it adds additional protection to Linux guests against
exfiltration, control flow and rollback attacks.
With SEV-ES, the guest is in full control of what registers the
hypervisor can access. This is provided by a guest-host exchange
mechanism based on a new exception vector called VMM Communication
Exception (#VC), a new instruction called VMGEXIT and a shared
Guest-Host Communication Block which is a decrypted page shared
between the guest and the hypervisor.
Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest
so in order for that exception mechanism to work, the early x86 init
code needed to be made able to handle exceptions, which, in itself,
brings a bunch of very nice cleanups and improvements to the early
boot code like an early page fault handler, allowing for on-demand
building of the identity mapping. With that, !KASLR configurations do
not use the EFI page table anymore but switch to a kernel-controlled
one.
The main part of this series adds the support for that new exchange
mechanism. The goal has been to keep this as much as possibly separate
from the core x86 code by concentrating the machinery in two
SEV-ES-specific files:
arch/x86/kernel/sev-es-shared.c
arch/x86/kernel/sev-es.c
Other interaction with core x86 code has been kept at minimum and
behind static keys to minimize the performance impact on !SEV-ES
setups.
Work by Joerg Roedel and Thomas Lendacky and others"
* tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer
x86/sev-es: Check required CPU features for SEV-ES
x86/efi: Add GHCB mappings when SEV-ES is active
x86/sev-es: Handle NMI State
x86/sev-es: Support CPU offline/online
x86/head/64: Don't call verify_cpu() on starting APs
x86/smpboot: Load TSS and getcpu GDT entry before loading IDT
x86/realmode: Setup AP jump table
x86/realmode: Add SEV-ES specific trampoline entry point
x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES
x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES
x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES
x86/sev-es: Handle #DB Events
x86/sev-es: Handle #AC Events
x86/sev-es: Handle VMMCALL Events
x86/sev-es: Handle MWAIT/MWAITX Events
x86/sev-es: Handle MONITOR/MONITORX Events
x86/sev-es: Handle INVD Events
x86/sev-es: Handle RDPMC Events
x86/sev-es: Handle RDTSC(P) Events
...
devices which doesn't need pinning of pages for DMA anymore. Add support
for the command submission to devices using new x86 instructions like
ENQCMD{,S} and MOVDIR64B. In addition, add support for process address
space identifiers (PASIDs) which are referenced by those command
submission instructions along with the handling of the PASID state on
context switch as another extended state. Work by Fenghua Yu, Ashok Raj,
Yu-cheng Yu and Dave Jiang.
-----BEGIN PGP SIGNATURE-----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=K9X4
-----END PGP SIGNATURE-----
Merge tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID updates from Borislav Petkov:
"Initial support for sharing virtual addresses between the CPU and
devices which doesn't need pinning of pages for DMA anymore.
Add support for the command submission to devices using new x86
instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support
for process address space identifiers (PASIDs) which are referenced by
those command submission instructions along with the handling of the
PASID state on context switch as another extended state.
Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang"
* tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction
x86/asm: Carve out a generic movdir64b() helper for general usage
x86/mmu: Allocate/free a PASID
x86/cpufeatures: Mark ENQCMD as disabled when configured out
mm: Add a pasid member to struct mm_struct
x86/msr-index: Define an IA32_PASID MSR
x86/fpu/xstate: Add supervisor PASID state for ENQCMD
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions
Documentation/x86: Add documentation for SVA (Shared Virtual Addressing)
iommu/vt-d: Change flags type to unsigned int in binding mm
drm, iommu: Change type of pasid to u32
A PASID is allocated for an "mm" the first time any thread binds to an
SVA-capable device and is freed from the "mm" when the SVA is unbound
by the last thread. It's possible for the "mm" to have different PASID
values in different binding/unbinding SVA cycles.
The mm's PASID (non-zero for valid PASID or 0 for invalid PASID) is
propagated to a per-thread PASID MSR for all threads within the mm
through IPI, context switch, or inherited. This is done to ensure that a
running thread has the right PASID in the MSR matching the mm's PASID.
[ bp: s/SVM/SVA/g; massage. ]
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-10-git-send-email-fenghua.yu@intel.com
The ENQCMD instruction reads a PASID from the IA32_PASID MSR. The
MSR is stored in the task's supervisor XSAVE* PASID state and is
context-switched by XSAVES/XRSTORS.
[ bp: Add (in-)definite articles and massage. ]
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-6-git-send-email-fenghua.yu@intel.com
The xgetbv() function is needed in the pre-decompression boot code,
but asm/fpu/internal.h can't be included there directly. Doing so
opens the door to include-hell due to various include-magic in
boot/compressed/misc.h.
Avoid that by moving xgetbv()/xsetbv() to a separate header file and
include it instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-27-joro@8bytes.org
Current minimum required version of binutils is 2.23, which supports
XGETBV and XSETBV instruction mnemonics.
Replace the byte-wise specification of XGETBV and XSETBV with these
proper mnemonics.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200707174722.58651-1-ubizjak@gmail.com
Pull ptrace regset updates from Al Viro:
"Internal regset API changes:
- regularize copy_regset_{to,from}_user() callers
- switch to saner calling conventions for ->get()
- kill user_regset_copyout()
The ->put() side of things will have to wait for the next cycle,
unfortunately.
The balance is about -1KLoC and replacements for ->get() instances are
a lot saner"
* 'work.regset' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
regset: kill user_regset_copyout{,_zero}()
regset(): kill ->get_size()
regset: kill ->get()
csky: switch to ->regset_get()
xtensa: switch to ->regset_get()
parisc: switch to ->regset_get()
nds32: switch to ->regset_get()
nios2: switch to ->regset_get()
hexagon: switch to ->regset_get()
h8300: switch to ->regset_get()
openrisc: switch to ->regset_get()
riscv: switch to ->regset_get()
c6x: switch to ->regset_get()
ia64: switch to ->regset_get()
arc: switch to ->regset_get()
arm: switch to ->regset_get()
sh: convert to ->regset_get()
arm64: switch to ->regset_get()
mips: switch to ->regset_get()
sparc: switch to ->regset_get()
...
All instances of ->get() in arch/x86 switched; that might or might
not be worth splitting up. Notes:
* for xstateregs_get() the amount we want to store is determined at
the boot time; see init_xstate_size() and update_regset_xstate_info() for
details. task->thread.fpu.state.xsave ends with a flexible array member and
the amount of data in it depends upon the FPU features supported/enabled.
* fpregs_get() writes slightly less than full ->thread.fpu.state.fsave
(the last word is not copied); we pass the full size of state.fsave and let
membuf_write() trim to the amount declared by regset - __regset_get() will
make sure that the space in buffer is no more than that.
* copy_xstate_to_user() and its helpers are gone now.
* fpregs_soft_get() was getting user_regset_copyout() arguments
wrong. Since "x86: x86 user_regset math_emu" back in 2008... I really
doubt that it's worth splitting out for -stable, though - you need
a 486SX box for that to trigger...
[Kevin's braino fix for copy_xstate_to_kernel() essentially duplicated here]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In the LBR call stack mode, LBR information is used to reconstruct a
call stack. To get the complete call stack, perf has to save/restore
all LBR registers during a context switch. Due to a large number of the
LBR registers, this process causes a high CPU overhead. To reduce the
CPU overhead during a context switch, use the XSAVES/XRSTORS
instructions.
Every XSAVE area must follow a canonical format: the legacy region, an
XSAVE header and the extended region. Although the LBR information is
only kept in the extended region, a space for the legacy region and
XSAVE header is still required. Add a new dedicated structure for LBR
XSAVES support.
Before enabling XSAVES support, the size of the LBR state has to be
sanity checked, because:
- the size of the software structure is calculated from the max number
of the LBR depth, which is enumerated by the CPUID leaf for Arch LBR.
The size of the LBR state is enumerated by the CPUID leaf for XSAVE
support of Arch LBR. If the values from the two CPUID leaves are not
consistent, it may trigger a buffer overflow. For example, a hypervisor
may unconsciously set inconsistent values for the two emulated CPUID.
- unlike other state components, the size of an LBR state depends on the
max number of LBRs, which may vary from generation to generation.
Expose the function xfeature_size() for the sanity check.
The LBR XSAVES support will be disabled if the size of the LBR state
enumerated by CPUID doesn't match with the size of the software
structure.
The XSAVE instruction requires 64-byte alignment for state buffers. A
new macro is added to reflect the alignment requirement. A 64-byte
aligned kmem_cache is created for architecture LBR.
Currently, the structure for each state component is maintained in
fpu/types.h. The structure for the new LBR state component should be
maintained in the same place. Move structure lbr_entry to fpu/types.h as
well for broader sharing.
Add dedicated lbr_save/lbr_restore functions for LBR XSAVES support,
which invokes the corresponding xstate helpers to XSAVES/XRSTORS LBR
information at the context switch when the call stack mode is enabled.
Since the XSAVES/XRSTORS instructions will be eventually invoked, the
dedicated functions is named with '_xsaves'/'_xrstors' postfix.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/1593780569-62993-23-git-send-email-kan.liang@linux.intel.com
The perf subsystem will only need to save/restore the LBR state.
However, the existing helpers save all supported supervisor states to a
kernel buffer, which will be unnecessary. Two helpers are introduced to
only save/restore requested dynamic supervisor states. The supervisor
features in XFEATURE_MASK_SUPERVISOR_SUPPORTED and
XFEATURE_MASK_SUPERVISOR_UNSUPPORTED mask cannot be saved/restored using
these helpers.
The helpers will be used in the following patch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/1593780569-62993-22-git-send-email-kan.liang@linux.intel.com
Last Branch Records (LBR) registers are used to log taken branches and
other control flows. In perf with call stack mode, LBR information is
used to reconstruct a call stack. To get the complete call stack, perf
has to save/restore all LBR registers during a context switch. Due to
the large number of the LBR registers, e.g., the current platform has
96 LBR registers, this process causes a high CPU overhead. To reduce
the CPU overhead during a context switch, an LBR state component that
contains all the LBR related registers is introduced in hardware. All
LBR registers can be saved/restored together using one XSAVES/XRSTORS
instruction.
However, the kernel should not save/restore the LBR state component at
each context switch, like other state components, because of the
following unique features of LBR:
- The LBR state component only contains valuable information when LBR
is enabled in the perf subsystem, but for most of the time, LBR is
disabled.
- The size of the LBR state component is huge. For the current
platform, it's 808 bytes.
If the kernel saves/restores the LBR state at each context switch, for
most of the time, it is just a waste of space and cycles.
To efficiently support the LBR state component, it is desired to have:
- only context-switch the LBR when the LBR feature is enabled in perf.
- only allocate an LBR-specific XSAVE buffer on demand.
(Besides the LBR state, a legacy region and an XSAVE header have to be
included in the buffer as well. There is a total of (808+576) byte
overhead for the LBR-specific XSAVE buffer. The overhead only happens
when the perf is actively using LBRs. There is still a space-saving,
on average, when it replaces the constant 808 bytes of overhead for
every task, all the time on the systems that support architectural
LBR.)
- be able to use XSAVES/XRSTORS for accessing LBR at run time.
However, the IA32_XSS should not be adjusted at run time.
(The XCR0 | IA32_XSS are used to determine the requested-feature
bitmap (RFBM) of XSAVES.)
A solution, called dynamic supervisor feature, is introduced to address
this issue, which
- does not allocate a buffer in each task->fpu;
- does not save/restore a state component at each context switch;
- sets the bit corresponding to the dynamic supervisor feature in
IA32_XSS at boot time, and avoids setting it at run time.
- dynamically allocates a specific buffer for a state component
on demand, e.g. only allocates LBR-specific XSAVE buffer when LBR is
enabled in perf. (Note: The buffer has to include the LBR state
component, a legacy region and a XSAVE header space.)
(Implemented in a later patch)
- saves/restores a state component on demand, e.g. manually invokes
the XSAVES/XRSTORS instruction to save/restore the LBR state
to/from the buffer when perf is active and a call stack is required.
(Implemented in a later patch)
A new mask XFEATURE_MASK_DYNAMIC and a helper xfeatures_mask_dynamic()
are introduced to indicate the dynamic supervisor feature. For the
systems which support the Architecture LBR, LBR is the only dynamic
supervisor feature for now. For the previous systems, there is no
dynamic supervisor feature available.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/1593780569-62993-21-git-send-email-kan.liang@linux.intel.com
When saving xstate to a kernel/user XSAVE area with the XSAVE family of
instructions, the current code applies the 'full' instruction mask (-1),
which tries to XSAVE all possible features. This method relies on
hardware to trim 'all possible' down to what is enabled in the
hardware. The code works well for now. However, there will be a
problem, if some features are enabled in hardware, but are not suitable
to be saved into all kernel XSAVE buffers, like task->fpu, due to
performance consideration.
One such example is the Last Branch Records (LBR) state. The LBR state
only contains valuable information when LBR is explicitly enabled by
the perf subsystem, and the size of an LBR state is large (808 bytes
for now). To avoid both CPU overhead and space overhead at each context
switch, the LBR state should not be saved into task->fpu like other
state components. It should be saved/restored on demand when LBR is
enabled in the perf subsystem. Current copy_xregs_to_* will trigger a
buffer overflow for such cases.
Three sites use the '-1' instruction mask which must be updated.
Two are saving/restoring the xstate to/from a kernel-allocated XSAVE
buffer and can use 'xfeatures_mask_all', which will save/restore all of
the features present in a normal task FPU buffer.
The last one saves the register state directly to a user buffer. It
could
also use 'xfeatures_mask_all'. Just as it was with the '-1' argument,
any supervisor states in the mask will be filtered out by the hardware
and not saved to the buffer. But, to be more explicit about what is
expected to be saved, use xfeatures_mask_user() for the instruction
mask.
KVM includes the header file fpu/internal.h. To avoid 'undefined
xfeatures_mask_all' compiling issue, move copy_fpregs_to_fpstate() to
fpu/core.c and export it, because:
- The xfeatures_mask_all is indirectly used via copy_fpregs_to_fpstate()
by KVM. The function which is directly used by other modules should be
exported.
- The copy_fpregs_to_fpstate() is a function, while xfeatures_mask_all
is a variable for the "internal" FPU state. It's safer to export a
function than a variable, which may be implicitly changed by others.
- The copy_fpregs_to_fpstate() is a big function with many checks. The
removal of the inline keyword should not impact the performance.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/1593780569-62993-20-git-send-email-kan.liang@linux.intel.com
Previously, kernel floating point code would run with the MXCSR control
register value last set by userland code by the thread that was active
on the CPU core just before kernel call. This could affect calculation
results if rounding mode was changed, or a crash if a FPU/SIMD exception
was unmasked.
Restore MXCSR to the kernel's default value.
[ bp: Carve out from a bigger patch by Petteri, add feature check, add
FNINIT call too (amluto). ]
Signed-off-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207979
Link: https://lkml.kernel.org/r/20200624114646.28953-2-bp@alien8.de
The XSAVES instruction takes a mask and saves only the features specified
in that mask. The kernel normally specifies that all features be saved.
XSAVES also unconditionally uses the "compacted format" which means that
all specified features are saved next to each other in memory. If a
feature is removed from the mask, all the features after it will "move
up" into earlier locations in the buffer.
Introduce copy_supervisor_to_kernel(), which saves only supervisor states
and then moves those states into the standard location where they are
normally found.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200512145444.15483-9-yu-cheng.yu@intel.com
The function copy_kernel_to_xregs_err() uses XRSTOR which can work with
standard or compacted format without supervisor xstates. However, when
supervisor xstates are present, XRSTORS must be used. Fix it by using
XRSTORS when supervisor state handling is enabled.
I also considered if there were additional cases where XRSTOR might be
mistakenly called instead of XRSTORS. There are only three XRSTOR sites
in the kernel:
1. copy_kernel_to_xregs_booting(), already switches between XRSTOR and
XRSTORS based on X86_FEATURE_XSAVES.
2. copy_user_to_xregs(), which *needs* XRSTOR because it is copying from
userspace and must never copy supervisor state with XRSTORS.
3. copy_kernel_to_xregs_err() mistakenly used XRSTOR only. Fix it.
[ bp: Massage commit message. ]
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-8-yu-cheng.yu@intel.com
