Now that the core can deal fine with analog TV modes, let's convert the
sun4i TV driver to leverage those new features.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-19-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):
- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
4.43361875 MHz (the PAL subcarrier frequency). Never used for
broadcasting, but sometimes used as a hack to play NTSC content in PAL
regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
frequency. Another non-standard, non-broadcast mode, used in similar
contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
been broadcast in Eastern Europe and various parts of Africa and Asia.
Uses the same 576i50 timings as PAL.
Also added some comments explaining color subcarrier frequency
registers.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-18-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Now that the core can deal fine with analog TV modes, let's convert the vc4
VEC driver to leverage those new features.
We've added some backward compatibility to support the old TV mode property
and translate it into the new TV norm property. We're also making use of
the new analog TV atomic_check helper to make sure we trigger a modeset
whenever the TV mode is updated.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-17-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The VEC can accept pretty much any relatively reasonable mode, but still
has a bunch of constraints to meet.
Let's create an atomic_check() implementation that will make sure we
don't end up accepting a non-functional mode.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-16-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The analog TV properties created by the drm_mode_create_tv_properties() are
not properly initialised at reset. Let's switch our implementation to call
drm_atomic_helper_connector_tv_reset().
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-15-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The analog TV connector drivers share some atomic_check logic, and the new
TV standard property have created some boilerplate that can be shared
across drivers too.
Let's create an atomic_check helper for those use cases.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-14-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The drm_tv_create_properties() function will create a bunch of properties,
but it's up to each and every driver using that function to properly reset
the state of these properties leading to inconsistent behaviours.
Let's create a helper that will take care of it.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-13-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Most of the TV connectors will need a similar get_modes implementation
that will, depending on the drivers' capabilities, register the 480i and
576i modes.
That implementation will also need to set the preferred flag and order
the modes based on the driver and users preferrence.
This is especially important to guarantee that a userspace stack such as
Xorg can start and pick up the preferred mode while maintaining a
working output.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-12-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Now that we can easily extend the named modes list, let's add a few more
analog TV modes that were used in the wild, and some unit tests to make
sure it works as intended.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-11-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Commit 3aeeb13d89 ("drm/modes: Support modes names on the command
line") initially introduced the named modes support by essentially
matching the name passed on the command-line to the mode names defined
by the drivers.
This proved to be difficult to work with, since all drivers had to
provide properly named modes. This was also needed because we weren't
passing a full blown-mode to the drivers, but were only filling its
name.
Thanks to the previous patches, we now generate a proper mode, and we
thus can use the usual matching algo on timings, and can simply drop the
name match.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-10-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The framework will get the drm_display_mode from the drm_cmdline_mode it
got by parsing the video command line argument by calling
drm_connector_pick_cmdline_mode().
The heavy lifting will then be done by the
drm_mode_create_from_cmdline_mode() function.
In the case of the named modes though, there's no real code to make that
translation and we rely on the drivers to guess which actual display mode
we meant.
Let's modify drm_mode_create_from_cmdline_mode() to properly generate the
drm_display_mode we mean when passing a named mode.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-9-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Our new tv mode option allows to specify the TV mode from a property.
However, it can still be useful, for example to avoid any boot time
artifact, to set that property directly from the kernel command line.
Let's add some code to allow it, and some unit tests to exercise that code.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-8-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
As part of the command line parsing rework coming in the next patches,
we'll need to lookup drm_connector_tv_mode values by their name, already
defined in drm_tv_mode_enum_list.
In order to avoid any code duplication, let's do a function that will
perform a lookup of a TV mode name and return its value.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-7-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Multiple drivers (meson, vc4, sun4i) define analog TV 525-lines and
625-lines modes in their drivers.
Since those modes are fairly standard, and that we'll need to use them
in more places in the future, it makes sense to move their definition
into the core framework.
However, analog display usually have fairly loose timings requirements,
the only discrete parameters being the total number of lines and pixel
clock frequency. Thus, we created a function that will create a display
mode from the standard, the pixel frequency and the active area.
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-6-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.
Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.
Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.
We'll then be able to phase out the older tv mode property.
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-5-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
drm_mode_create_tv_properties(), among other things, will create the
"mode" property that stores the analog TV mode that connector is
supposed to output.
However, that property is getting deprecated, so let's rename that
function to mention it's deprecated. We'll introduce a new variant of
that function creating the property superseeding it in a later patch.
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-4-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The drm_create_tv_properties() will create the TV mode property
unconditionally.
However, since we'll gradually phase it out, let's register it only if we
have a list passed as an argument. This will make the transition easier.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-3-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The current tv_mode has driver-specific values that don't allow to
easily share code using it, either at the userspace or kernel level.
Since we're going to introduce a new, generic, property that fit the
same purpose, let's rename this one to legacy_tv_mode to make it
obvious we should move away from it.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-2-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
That file is included directly, so we can't use any MODULE macro. Let's
leave a comment to avoid any future mistake.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-1-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
I've been collecting these typo fixes for a while and it feels like
time to send them in.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123193519.3948105-1-tjmercier@google.com
Signed-off-by: Christian König <christian.koenig@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmN6wAgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0EYH/3/RO90NbrFItraN
Lzr+d3VdbGjTu8xd1M+PRTmwh3zxLpB+Jwqr0T0A2gzL9B/D+AUPUJdrCVbv9DqS
FLJAVqoeV20dNBAHSffOOLPsgCZ+Eu+LzlNN7Iqde0e8cyZICFMNktitui84Xm/i
1NgFVgz9OZ6+aieYvUj3FrFq0p8GTIaC/oybDZrxYKcO8ZzKVMJ11swRw10wwq0g
qOOECvV3w7wlQ8upQZkzFxItKFc7EexZI6R4elXeGSJJ9Hlc092dv/zsKB9dwV+k
WcwkJrZRoezYXzgGBFxUcQtzi+ethjrPjuJuM1rYLUSIcfIW/0lkaSLgRoBu8D+I
1GfXkXs=
=gt6P
-----END PGP SIGNATURE-----
Backmerge tag 'v6.1-rc6' into drm-next
Linux 6.1-rc6
This is needed for drm-misc-next and tegra.
Signed-off-by: Dave Airlie <airlied@redhat.com>
As of commit eae06120f1 ("drm: refuse ADDFB2 ioctl for broken
bigendian drivers"), drivers must set the
quirk_addfb_prefer_host_byte_order quirk to make the drm_mode_addfb()
compat code work correctly on big-endian machines.
While that works fine for big-endian XRGB8888 and ARGB8888, which are
mapped to the existing little-endian BGRX8888 and BGRA8888 formats, it
does not work for big-endian XRGB1555 and RGB565, as the latter are not
listed in the format database.
Fix this by adding the missing formats. Limit this to big-endian
platforms, as there is currently no need to support these formats on
little-endian platforms.
Fixes: 6960e6da9c ("drm: fix drm_mode_addfb() on big endian machines.")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/3ee1f8144feb96c28742b22384189f1f83bcfc1a.1669221671.git.geert@linux-m68k.org
Correct grammar and make the use of the igt-tests more readable.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118235137.6859-1-rdunlap@infradead.org
The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy()
while userspace process is exiting or being killed. First time it's invoked
when sched entity is flushed and second time when entity is released. This
causes a lockup within wait_for_completion(entity_idle) due to how completion
API works.
Calling wait_for_completion() more times than complete() was invoked is a
error condition that causes lockup because completion internally uses
counter for complete/wait calls. The complete_all() must be used instead
in such cases.
This patch fixes lockup of Panfrost driver that is reproducible by killing
any application in a middle of 3d drawing operation.
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com
- gvt-next stuff mostly with refactor for the new MDEV interface.
i915 Changes:
- PSR fixes and improvements (Jouni)
- DP DSC fixes (Vinod, Jouni)
- More general display cleanups (Jani)
- More display collor management cleanup targetting degamma (Ville)
- remove circ_buf.h includes (Jiri)
- wait power off delay at driver remove to optimize probe (Jani)
- More audio cleanup targeting the ELD precompute readout (Ville)
- Enable DC power states on all eDP ports (Imre)
- RPL-P stepping info (Matt Atwood)
- MTL enabling patches (RK)
- Removal of DG2 force_probe (Matt)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmN3+28ACgkQ+mJfZA7r
E8rGZQf9HiTNW1yM1/YGq7ezD6/XN2sbCaH/iVNd0+FHxz4HHaTJaEVQ1xEBTdIb
poMQiWl64ig3t2LuDrRGwlsVmFYV3vK5byt758sMpLb/M3cWbbB2swsW4YTbORM6
qcatv9eYyuoiylwj6fVLFPMXpwNTyCdbngbLZt+tTcl1oxaZYp0PVXBkzlKFP02U
KL4p+Dv4OHSjP38beIzUaHz3IJJAik/ttsxa1JhhC8F9UUJs7kuo6GXMY1OzRNpc
jKj3+F0OtDRA2xaw7YpbLI8yt+pWzerqFsnZDAvvx8Js7SQLkyNtjkuHusp8OP77
x99MlyOfbSfBnkbdm4Rhm7IIPTiUnw==
=SHn9
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2022-11-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
GVT Changes:
- gvt-next stuff mostly with refactor for the new MDEV interface.
i915 Changes:
- PSR fixes and improvements (Jouni)
- DP DSC fixes (Vinod, Jouni)
- More general display cleanups (Jani)
- More display collor management cleanup targetting degamma (Ville)
- remove circ_buf.h includes (Jiri)
- wait power off delay at driver remove to optimize probe (Jani)
- More audio cleanup targeting the ELD precompute readout (Ville)
- Enable DC power states on all eDP ports (Imre)
- RPL-P stepping info (Matt Atwood)
- MTL enabling patches (RK)
- Removal of DG2 force_probe (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com
amd-drm-next-6.2-2022-11-18:
amdgpu:
- SR-IOV fixes
- Clean up DC checks
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- Don't enable degamma on asics which don't support it
- IP discovery fixes
- BACO fixes
- Fix vbios allocation handling when vkms is enabled
- Drop buggy tdr advanced mode GPU reset handling
- Fix the build when DCN is not set in kconfig
- MST DSC fixes
- Userptr fixes
- FRU and RAS EEPROM fixes
- VCN 4.x RAS support
- Aldrebaran CU occupancy reporting fix
- PSP ring cleanup
amdkfd:
- Memory limit fix
- Enable cooperative launch on gfx 10.3
amd-drm-next-6.2-2022-11-11:
amdgpu:
- SMU 13.x updates
- GPUVM TLB race fix
- DCN 3.1.4 updates
- DCN 3.2.x updates
- PSR fixes
- Kerneldoc fix
- Vega10 fan fix
- GPUVM locking fixes in error pathes
- BACO fix for Beige Goby
- EEPROM I2C address cleanup
- GFXOFF fix
- Fix DC memory leak in error pathes
- Flexible array updates
- Mtype fix for GPUVM PTEs
- Move Kconfig into amdgpu directory
- SR-IOV updates
- Fix possible memory leak in CS IOCTL error path
amdkfd:
- Fix possible memory overrun
- CRIU fixes
radeon:
- ACPI ref count fix
- HDA audio notifier support
- Move Kconfig into radeon directory
UAPI:
- Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI.
These are used internally in the driver to align location based memory coherency
requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They
are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now.
They are just used internally in the kernel driver for now for existing KFD memory
allocations. So a change to the UAPI header, but no functional change in the UAPI.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
please pull the following etnaviv changes for the next merge window.
Mostly some small workarounds to get new hardware support going. But
also more fixes to the softpin MMU handling and a nice addition from
Christian to make the kernel logs on hang detection more useful.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/adcb1b3dec89a18d6c3c4ee6e179b9b2c9f25046.camel@pengutronix.de
UAPI Changes:
Cross-subsystem Changes:
- fbdev: Add support for the nomodeset kernel parameter
Core Changes:
- client: Add kunit tests for drm_connector_pick_cmdline_mode()
- dma-buf: Move dma_buf_mmap_internal() to new locking specification
- edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a
temporary device to load the EDID through the firmware mechanism
- fb-helper: Remove damage worker
- gem-vram: Fix deadlock in drm_gem_vram_vmap()
- modes: Named mode parsing improvements
- tests: Add Kunit helpers to create a DRM device
Driver Changes:
- hisilicon: convert to drm_mode_init()
- malidp: Use drm-managed resources
- msm: convert to drm_mode_init() and drm_mode_copy()
- mtk: convert to drm_mode_init()
- nouveau: Support backlight control for nva3
- rockchip: convert to drm_mode_copy()
- sti: convert to drm_mode_copy()
- v3d: Switch to drm-managed resources
- vc4: Fix potential NULL pointer dereference
- panels:
- New panel: NewVision NV3051D
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCY3XyTAAKCRDj7w1vZxhR
xfh8APkBLspfEk0WneXqIanPLOLCIU4Fcd7IvjNsy5nRODM5ewD8D4pCzRYz6zGf
0rAHzuvISUBHBWES/EWpO61GJ7d/1gA=
=ZM1O
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-11-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
- fbdev: Add support for the nomodeset kernel parameter
Core Changes:
- client: Add kunit tests for drm_connector_pick_cmdline_mode()
- dma-buf: Move dma_buf_mmap_internal() to new locking specification
- edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a
temporary device to load the EDID through the firmware mechanism
- fb-helper: Remove damage worker
- gem-vram: Fix deadlock in drm_gem_vram_vmap()
- modes: Named mode parsing improvements
- tests: Add Kunit helpers to create a DRM device
Driver Changes:
- hisilicon: convert to drm_mode_init()
- malidp: Use drm-managed resources
- msm: convert to drm_mode_init() and drm_mode_copy()
- mtk: convert to drm_mode_init()
- nouveau: Support backlight control for nva3
- rockchip: convert to drm_mode_copy()
- sti: convert to drm_mode_copy()
- v3d: Switch to drm-managed resources
- vc4: Fix potential NULL pointer dereference
- panels:
- New panel: NewVision NV3051D
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117083628.mzij5nrbdzokek7c@houat
drmm_mode_config_init() will call drm_mode_create_standard_properties()
and won't check the ret value. When drm_mode_create_standard_properties()
failed due to alloc, property will be a NULL pointer and may causes the
null-ptr-deref. Fix the null-ptr-deref by adding the ret value check.
Found null-ptr-deref while testing insert module bochs:
general protection fault, probably for non-canonical address
0xdffffc000000000c: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 3 PID: 249 Comm: modprobe Not tainted 6.1.0-rc1+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:drm_object_attach_property+0x73/0x3c0 [drm]
Call Trace:
<TASK>
__drm_connector_init+0xb6c/0x1100 [drm]
bochs_pci_probe.cold.11+0x4cb/0x7fe [bochs]
pci_device_probe+0x17d/0x340
really_probe+0x1db/0x5d0
__driver_probe_device+0x1e7/0x250
driver_probe_device+0x4a/0x120
__driver_attach+0xcd/0x2c0
bus_for_each_dev+0x11a/0x1b0
bus_add_driver+0x3d7/0x500
driver_register+0x18e/0x320
do_one_initcall+0xc4/0x3e0
do_init_module+0x1b4/0x630
load_module+0x5dca/0x7230
__do_sys_finit_module+0x100/0x170
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff65af9f839
Fixes: 6b4959f43a ("drm/atomic: atomic plane properties")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118021651.2460-1-shangxiaojing@huawei.com
- Fix possible NULL pointer dereference on trace_event_file in kprobe_event_gen_test_exit()
- Fix NULL pointer dereference for trace_array in kprobe_event_gen_test_exit()
- Fix memory leak of filter string for eprobes
- Fix a possible memory leak in rethook_alloc()
- Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
which can cause a possible use-after-free
- Fix warning in eprobe filter creation
- Fix eprobe filter creation as it picked the wrong event for the fields
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY3qRDhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgCdAP0cB1ZjmMM7O8OFdnrTV0jfavZTnNNC
ut9sczpYQ0upcwEArmVvB+H3sTM6Y7PrsQEUn8gsc7WmieUoDAOr0hIe4AI=
=DGVC
-----END PGP SIGNATURE-----
Merge tag 'trace-probes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing/probes fixes from Steven Rostedt:
- Fix possible NULL pointer dereference on trace_event_file in
kprobe_event_gen_test_exit()
- Fix NULL pointer dereference for trace_array in
kprobe_event_gen_test_exit()
- Fix memory leak of filter string for eprobes
- Fix a possible memory leak in rethook_alloc()
- Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case which
can cause a possible use-after-free
- Fix warning in eprobe filter creation
- Fix eprobe filter creation as it picked the wrong event for the
fields
* tag 'trace-probes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: Fix eprobe filter to make a filter correctly
tracing/eprobe: Fix warning in filter creation
kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
rethook: fix a potential memleak in rethook_alloc()
tracing/eprobe: Fix memory leak of filter string
tracing: kprobe: Fix potential null-ptr-deref on trace_array in kprobe_event_gen_test_exit()
tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in kprobe_event_gen_test_exit()
- Fix polling to block on watermark like the reads do, as user space
applications get confused when the select says read is available, and then
the read blocks.
- Fix accounting of ring buffer dropped pages as it is what is used to
determine if the buffer is empty or not.
- Fix memory leak in tracing_read_pipe()
- Fix struct trace_array warning about being declared in parameters
- Fix accounting of ftrace pages used in output at start up.
- Fix allocation of dyn_ftrace pages by subtracting one from order instead of
diving it by 2
- Static analyzer found a case were a pointer being used outside of a NULL
check. (rb_head_page_deactivate())
- Fix possible NULL pointer dereference if kstrdup() fails in ftrace_add_mod()
- Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
- Fix bad pointer dereference in register_synth_event() on error path.
- Remove unused __bad_type_size() method
- Fix possible NULL pointer dereference of entry in list 'tr->err_log'
- Fix NULL pointer deference race if eprobe is called before the event setup
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY3qNNBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiVzAP9vdtLkseOueVqPJ/Wc6v3z0xlkxO4L
Aj9jOac822SPOQEAvUJ1DM1bxm/D2BY5AQsfgSGjdaVYP+I3kvETNgWspQI=
=3ta3
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix polling to block on watermark like the reads do, as user space
applications get confused when the select says read is available, and
then the read blocks
- Fix accounting of ring buffer dropped pages as it is what is used to
determine if the buffer is empty or not
- Fix memory leak in tracing_read_pipe()
- Fix struct trace_array warning about being declared in parameters
- Fix accounting of ftrace pages used in output at start up.
- Fix allocation of dyn_ftrace pages by subtracting one from order
instead of diving it by 2
- Static analyzer found a case were a pointer being used outside of a
NULL check (rb_head_page_deactivate())
- Fix possible NULL pointer dereference if kstrdup() fails in
ftrace_add_mod()
- Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
- Fix bad pointer dereference in register_synth_event() on error path
- Remove unused __bad_type_size() method
- Fix possible NULL pointer dereference of entry in list 'tr->err_log'
- Fix NULL pointer deference race if eprobe is called before the event
setup
* tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix race where eprobes can be called before the event
tracing: Fix potential null-pointer-access of entry in list 'tr->err_log'
tracing: Remove unused __bad_type_size() method
tracing: Fix wild-memory-access in register_synth_event()
tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
ftrace: Fix null pointer dereference in ftrace_add_mod()
ring_buffer: Do not deactivate non-existant pages
ftrace: Optimize the allocation for mcount entries
ftrace: Fix the possible incorrect kernel message
tracing: Fix warning on variable 'struct trace_array'
tracing: Fix memory leak in tracing_read_pipe()
ring-buffer: Include dropped pages in counting dirty patches
tracing/ring-buffer: Have polling block on watermark
The flag that tells the event to call its triggers after reading the event
is set for eprobes after the eprobe is enabled. This leads to a race where
the eprobe may be triggered at the beginning of the event where the record
information is NULL. The eprobe then dereferences the NULL record causing
a NULL kernel pointer bug.
Test for a NULL record to keep this from happening.
Link: https://lore.kernel.org/linux-trace-kernel/20221116192552.1066630-1-rafaelmendsr@gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20221117214249.2addbe10@gandalf.local.home
Cc: Linux Trace Kernel <linux-trace-kernel@vger.kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
fpregs lock disables preemption on RT but fpu_inherit_perms() does
spin_lock_irq(), which, on RT, uses rtmutexes and they need to be
preemptible.
- Check the page offset and the length of the data supplied by userspace
for overflow when specifying a set of pages to add to an SGX enclave
-----BEGIN PGP SIGNATURE-----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=VQD4
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not hold fpregs lock when inheriting FPU permissions because the
fpregs lock disables preemption on RT but fpu_inherit_perms() does
spin_lock_irq(), which, on RT, uses rtmutexes and they need to be
preemptible.
- Check the page offset and the length of the data supplied by
userspace for overflow when specifying a set of pages to add to an
SGX enclave
* tag 'x86_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Drop fpregs lock before inheriting FPU permissions
x86/sgx: Add overflow check in sgx_validate_offset_length()
misunderstanding whether the task holds rq->lock or not
- Prevent processes from getting killed when using deprecated or unknown
rseq ABI flags in order to be able to fuzz the rseq() syscall with
syzkaller
-----BEGIN PGP SIGNATURE-----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=I+nD
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix a small race on the task's exit path where there's a
misunderstanding whether the task holds rq->lock or not
- Prevent processes from getting killed when using deprecated or
unknown rseq ABI flags in order to be able to fuzz the rseq() syscall
with syzkaller
* tag 'sched_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix race in task_call_func()
rseq: Use pr_warn_once() when deprecated/unknown ABI flags are encountered
for more than 4K
- Fix a NULL ptr dereference which can happen after an NMI interferes
with the event enabling dance in amd_pmu_enable_all()
- Free the events array too when freeing uncore contexts on CPU online,
thereby fixing a memory leak
- Improve the pending SIGTRAP check
-----BEGIN PGP SIGNATURE-----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=9ZHJ
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix an intel PT erratum where CPUs do not support single range output
for more than 4K
- Fix a NULL ptr dereference which can happen after an NMI interferes
with the event enabling dance in amd_pmu_enable_all()
- Free the events array too when freeing uncore contexts on CPU online,
thereby fixing a memory leak
- Improve the pending SIGTRAP check
* tag 'perf_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix sampling using single range output
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
perf/x86/amd/uncore: Fix memory leak for events array
perf: Improve missing SIGTRAP checking
- Fix writable sections being moved into the rodata region.
Thanks to: Nicholas Piggin, Christophe Leroy.
-----BEGIN PGP SIGNATURE-----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=KaMV
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix writable sections being moved into the rodata region.
Thanks to Nicholas Piggin and Christophe Leroy.
* tag 'powerpc-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix writable sections being moved into the rodata region
Five small fixes, all in drivers. Most of these are error leg freeing
issues, with the only really user visible one being the zfcp fix.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY3lYZyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishflGAPwIJV0F
42sRod5/ULPVh3YRtSzUWwhVqSxlxN6eAaZJbgD/fcPsIa96WCtSYjevLPc+afDh
Ecb5nfwbA8cc9cjqmS8=
=NNYw
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes, all in drivers.
Most of these are error leg freeing issues, with the only really user
visible one being the zfcp fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix possible memory leak when device_register() failed
scsi: zfcp: Fix double free of FSF request when qdio send fails
scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
scsi: mpi3mr: Suppress command reply debug prints
Including:
- Fix presetting accessed bits in Intel VT-d page-directory
entries to avoid hardware error
- Set supervisor bit only when Intel IOMMU has the SRS
capability
-----BEGIN PGP SIGNATURE-----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=gjdA
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Preset accessed bits in Intel VT-d page-directory entries to avoid
hardware error
- Set supervisor bit only when Intel IOMMU has the SRS capability
* tag 'iommu-fixes-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Set SRE bit only when hardware has SRS cap
iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entries
- Update MAINTAINERS with Nathan and Nicolas as new Kbuild reviewers.
- Increment the debian revision for deb-pkg builds
-----BEGIN PGP SIGNATURE-----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=KSm6
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Update MAINTAINERS with Nathan and Nicolas as new Kbuild reviewers
- Increment the debian revision for deb-pkg builds
* tag 'kbuild-fixes-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Restore .version auto-increment behaviour for Debian packages
MAINTAINERS: Add linux-kbuild's patchwork
MAINTAINERS: Remove Michal Marek from Kbuild maintainers
MAINTAINERS: Add Nathan and Nicolas to Kbuild reviewers
-----BEGIN PGP SIGNATURE-----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=/bd9
-----END PGP SIGNATURE-----
Merge tag '6.1-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- two missing and one incorrect return value checks
- fix leak on tlink mount failure
* tag '6.1-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add check for returning value of SMB2_set_info_init
cifs: Fix wrong return value checking when GETFLAGS
cifs: add check for returning value of SMB2_close_init
cifs: Fix connections leak when tlink setup failed
SRS cap is the hardware cap telling if the hardware IOMMU can support
requests seeking supervisor privilege or not. SRE bit in scalable-mode
PASID table entry is treated as Reserved(0) for implementation not
supporting SRS cap.
Checking SRS cap before setting SRE bit can avoid the non-recoverable
fault of "Non-zero reserved field set in PASID Table Entry" caused by
setting SRE bit while there is no SRS cap support. The fault messages
look like below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [00:0d.0] fault addr 0x1154e1000
[fault reason 0x5a]
SM: Non-zero reserved field set in PASID Table Entry
Fixes: 6f7db75e1c ("iommu/vt-d: Add second level page table interface")
Cc: stable@vger.kernel.org
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20221115070346.1112273-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20221116051544.26540-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The A/D bits are preseted for IOVA over first level(FL) usage for both
kernel DMA (i.e, domain typs is IOMMU_DOMAIN_DMA) and user space DMA
usage (i.e., domain type is IOMMU_DOMAIN_UNMANAGED).
Presetting A bit in FL requires to preset the bit in every related paging
entries, including the non-leaf ones. Otherwise, hardware may treat this
as an error. For example, in a case of ECAP_REG.SMPWC==0, DMA faults might
occur with below DMAR fault messages (wrapped for line length) dumped.
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [aa:00.0] fault addr 0x10c3a6000
[fault reason 0x90]
SM: A/D bit update needed in first-level entry when set up in no snoop
Fixes: 289b3b005c ("iommu/vt-d: Preset A/D bits for user space DMA usage")
Cc: stable@vger.kernel.org
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20221113010324.1094483-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20221116051544.26540-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
