Under extremely rare conditions TCP early demux will retrieve the wrong
socket.
1. local machine establishes a connection to a remote server, S, on port
p.
This gives:
laddr:lport -> S:p
... both in tcp and conntrack.
2. local machine establishes a connection to host H, on port p2.
2a. TCP stack choses same laddr:lport, so we have
laddr:lport -> H:p2 from TCP point of view.
2b). There is a destination NAT rewrite in place, translating
H:p2 to S:p. This results in following conntrack entries:
I) laddr:lport -> S:p (origin) S:p -> laddr:lport (reply)
II) laddr:lport -> H:p2 (origin) S:p -> laddr:lport2 (reply)
NAT engine has rewritten laddr:lport to laddr:lport2 to map
the reply packet to the correct origin.
When server sends SYN/ACK to laddr:lport2, the PREROUTING hook
will undo-the SNAT transformation, rewriting IP header to
S:p -> laddr:lport
This causes TCP early demux to associate the skb with the TCP socket
of the first connection.
The INPUT hook will then reverse the DNAT transformation, rewriting
the IP header to H:p2 -> laddr:lport.
Because packet ends up with the wrong socket, the new connection
never completes: originator stays in SYN_SENT and conntrack entry
remains in SYN_RECV until timeout, and responder retransmits SYN/ACK
until it gives up.
To resolve this, orphan the skb after the input rewrite:
Because the source IP address changed, the socket must be incorrect.
We can't move the DNAT undo to prerouting due to backwards
compatibility, doing so will make iptables/nftables rules to no longer
match the way they did.
After orphan, the packet will be handed to the next protocol layer
(tcp, udp, ...) and that will repeat the socket lookup just like as if
early demux was disabled.
Fixes: 41063e9dd1 ("ipv4: Early TCP socket demux.")
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1427
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Removed an extra space in a log message and an extra blank line in code.
Signed-off-by: Klemen Košir <klemen.kosir@kream.io>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----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=oc8u
-----END PGP SIGNATURE-----
Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
getsockopt(TCP_ZEROCOPY_RECEIVE) has a bug where we read a
user-provided "len" field of type signed int, and then compare the
value to the result of an "offsetofend" operation, which is unsigned.
Negative values provided by the user will be promoted to large
positive numbers; thus checking that len < offsetofend() will return
false when the intention was that it return true.
Note that while len is originally checked for negative values earlier
on in do_tcp_getsockopt(), subsequent calls to get_user() re-read the
value from userspace which may have changed in the meantime.
Therefore, re-add the check for negative values after the call to
get_user in the handler code for TCP_ZEROCOPY_RECEIVE.
Fixes: c8856c0514 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Arjun Roy <arjunroy@google.com>
Link: https://lore.kernel.org/r/20210225232628.4033281-1-arjunroy.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the ocelot driver code is in a library, the dsa tag
code cannot be built-in:
ld.lld: error: undefined symbol: ocelot_can_inject
>>> referenced by tag_ocelot_8021q.c
>>> dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a
ld.lld: error: undefined symbol: ocelot_port_inject_frame
>>> referenced by tag_ocelot_8021q.c
>>> dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a
Building the tag support only really makes sense for compile-testing
when the driver is available, so add a Kconfig dependency that prevents
the broken configuration while allowing COMPILE_TEST alternative when
MSCC_OCELOT_SWITCH_LIB is disabled entirely. This case is handled
through the #ifdef check in include/soc/mscc/ocelot.h.
Fixes: 0a6f17c6ae ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210225143910.3964364-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- New Features:
- Support for eager writes, and the write=eager and write=wait mount options
- Other Bugfixes and Cleanups:
- Fix typos in some comments
- Fix up fall-through warnings for Clang
- Cleanups to the NFS readpage codepath
- Remove FMR support in rpcrdma_convert_iovs()
- Various other cleanups to xprtrdma
- Fix xprtrdma pad optimization for servers that don't support RFC 8797
- Improvements to rpcrdma tracepoints
- Fix up nfs4_bitmask_adjust()
- Optimize sparse writes past the end of files
-----BEGIN PGP SIGNATURE-----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=Dssn
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.12-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS Client Updates from Anna Schumaker:
"New Features:
- Support for eager writes, and the write=eager and write=wait mount
options
- Other Bugfixes and Cleanups:
- Fix typos in some comments
- Fix up fall-through warnings for Clang
- Cleanups to the NFS readpage codepath
- Remove FMR support in rpcrdma_convert_iovs()
- Various other cleanups to xprtrdma
- Fix xprtrdma pad optimization for servers that don't support
RFC 8797
- Improvements to rpcrdma tracepoints
- Fix up nfs4_bitmask_adjust()
- Optimize sparse writes past the end of files"
* tag 'nfs-for-5.12-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (27 commits)
NFS: Support the '-owrite=' option in /proc/self/mounts and mountinfo
NFS: Set the stable writes flag when initialising the super block
NFS: Add mount options supporting eager writes
NFS: Add support for eager writes
NFS: 'flags' field should be unsigned in struct nfs_server
NFS: Don't set NFS_INO_INVALID_XATTR if there is no xattr cache
NFS: Always clear an invalid mapping when attempting a buffered write
NFS: Optimise sparse writes past the end of file
NFS: Fix documenting comment for nfs_revalidate_file_size()
NFSv4: Fixes for nfs4_bitmask_adjust()
xprtrdma: Clean up rpcrdma_prepare_readch()
rpcrdma: Capture bytes received in Receive completion tracepoints
xprtrdma: Pad optimization, revisited
rpcrdma: Fix comments about reverse-direction operation
xprtrdma: Refactor invocations of offset_in_page()
xprtrdma: Simplify rpcrdma_convert_kvec() and frwr_map()
xprtrdma: Remove FMR support in rpcrdma_convert_iovs()
NFS: Add nfs_pageio_complete_read() and remove nfs_readpage_async()
NFS: Call readpage_async_filler() from nfs_readpage_async()
NFS: Refactor nfs_readpage() and nfs_readpage_async() to use nfs_readdesc
...
Current release - regressions:
- bcm63xx_enet: fix sporadic kernel panic due to queue length
mis-accounting
Current release - new code bugs:
- bcm4908_enet: fix RX path possible mem leak
- bcm4908_enet: fix NAPI poll returned value
- stmmac: fix missing spin_lock_init in visconti_eth_dwmac_probe()
- sched: cls_flower: validate ct_state for invalid and reply flags
Previous releases - regressions:
- net: introduce CAN specific pointer in the struct net_device to
prevent mis-interpreting memory
- phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081
- psample: fix netlink skb length with tunnel info
Previous releases - always broken:
- icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending
- wireguard: device: do not generate ICMP for non-IP packets
- mptcp: provide subflow aware release function to avoid a mem leak
- hsr: add support for EntryForgetTime
- r8169: fix jumbo packet handling on RTL8168e
- octeontx2-af: fix an off by one in rvu_dbg_qsize_write()
- i40e: fix flow for IPv6 next header (extension header)
- phy: icplus: call phy_restore_page() when phy_select_page() fails
- dpaa_eth: fix the access method for the dpaa_napi_portal
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DUP/
-----END PGP SIGNATURE-----
Merge tag 'net-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Rather small batch this time.
Current release - regressions:
- bcm63xx_enet: fix sporadic kernel panic due to queue length
mis-accounting
Current release - new code bugs:
- bcm4908_enet: fix RX path possible mem leak
- bcm4908_enet: fix NAPI poll returned value
- stmmac: fix missing spin_lock_init in visconti_eth_dwmac_probe()
- sched: cls_flower: validate ct_state for invalid and reply flags
Previous releases - regressions:
- net: introduce CAN specific pointer in the struct net_device to
prevent mis-interpreting memory
- phy: micrel: set soft_reset callback to genphy_soft_reset for
KSZ8081
- psample: fix netlink skb length with tunnel info
Previous releases - always broken:
- icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending
- wireguard: device: do not generate ICMP for non-IP packets
- mptcp: provide subflow aware release function to avoid a mem leak
- hsr: add support for EntryForgetTime
- r8169: fix jumbo packet handling on RTL8168e
- octeontx2-af: fix an off by one in rvu_dbg_qsize_write()
- i40e: fix flow for IPv6 next header (extension header)
- phy: icplus: call phy_restore_page() when phy_select_page() fails
- dpaa_eth: fix the access method for the dpaa_napi_portal"
* tag 'net-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
r8169: fix jumbo packet handling on RTL8168e
net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081
net: psample: Fix netlink skb length with tunnel info
net: broadcom: bcm4908_enet: fix NAPI poll returned value
net: broadcom: bcm4908_enet: fix RX path possible mem leak
net: hsr: add support for EntryForgetTime
net: dsa: sja1105: Remove unneeded cast in sja1105_crc32()
ibmvnic: fix a race between open and reset
net: stmmac: Fix missing spin_lock_init in visconti_eth_dwmac_probe()
net: introduce CAN specific pointer in the struct net_device
net: usb: qmi_wwan: support ZTE P685M modem
wireguard: kconfig: use arm chacha even with no neon
wireguard: queueing: get rid of per-peer ring buffers
wireguard: device: do not generate ICMP for non-IP packets
wireguard: peer: put frequently used members above cache lines
wireguard: selftests: test multiple parallel streams
wireguard: socket: remove bogus __be32 annotation
wireguard: avoid double unlikely() notation when using IS_ERR()
net: qrtr: Fix memory leak in qrtr_tun_open
vxlan: move debug check after netdev unregister
...
Currently, the psample netlink skb is allocated with a size that does
not account for the nested 'PSAMPLE_ATTR_TUNNEL' attribute and the
padding required for the 64-bit attribute 'PSAMPLE_TUNNEL_KEY_ATTR_ID'.
This can result in failure to add attributes to the netlink skb due
to insufficient tail room. The following error message is printed to
the kernel log: "Could not create psample log message".
Fix this by adjusting the allocation size to take into account the
nested attribute and the padding.
Fixes: d8bed686ab ("net: psample: Add tunnel support")
CC: Yotam Gigi <yotam.gi@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Link: https://lore.kernel.org/r/20210225075145.184314-1-cmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In IEC 62439-3 EntryForgetTime is defined with a value of 400 ms. When a
node does not send any frame within this time, the sequence number check
for can be ignored. This solves communication issues with Cisco IE 2000
in Redbox mode.
Fixes: f421436a59 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Marco Wenzel <marco.wenzel@a-eberle.de>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224094653.1440-1-marco.wenzel@a-eberle.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since 20dd3850bc ("can: Speed up CAN frame receiption by using
ml_priv") the CAN framework uses per device specific data in the AF_CAN
protocol. For this purpose the struct net_device->ml_priv is used. Later
the ml_priv usage in CAN was extended for other users, one of them being
CAN_J1939.
Later in the kernel ml_priv was converted to an union, used by other
drivers. E.g. the tun driver started storing it's stats pointer.
Since tun devices can claim to be a CAN device, CAN specific protocols
will wrongly interpret this pointer, which will cause system crashes.
Mostly this issue is visible in the CAN_J1939 stack.
To fix this issue, we request a dedicated CAN pointer within the
net_device struct.
Reported-by: syzbot+5138c4dd15a0401bec7b@syzkaller.appspotmail.com
Fixes: 20dd3850bc ("can: Speed up CAN frame receiption by using ml_priv")
Fixes: ffd956eef6 ("can: introduce CAN midlayer private and allocate it automatically")
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Fixes: 497a5757ce ("tun: switch to net core provided statistics counters")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210223070127.4538-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No need to restrict these anymore, as the worker threads are direct
clones of the original task. Hence we know for a fact that we can
support anything that the regular task can.
Since the only user of proto_ops->flags was to flag PROTO_CMSG_DATA_ONLY,
kill the member and the flag definition too.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
Add invalid and reply flags validate in the fl_validate_ct_state.
This makes the checking complete if compared to ovs'
validate_ct_state().
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/1614064315-364-1-git-send-email-wenxu@ucloud.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The icmp{,v6}_send functions make all sorts of use of skb->cb, casting
it with IPCB or IP6CB, assuming the skb to have come directly from the
inet layer. But when the packet comes from the ndo layer, especially
when forwarded, there's no telling what might be in skb->cb at that
point. As a result, the icmp sending code risks reading bogus memory
contents, which can result in nasty stack overflows such as this one
reported by a user:
panic+0x108/0x2ea
__stack_chk_fail+0x14/0x20
__icmp_send+0x5bd/0x5c0
icmp_ndo_send+0x148/0x160
In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read
from it. The optlen parameter there is of particular note, as it can
induce writes beyond bounds. There are quite a few ways that can happen
in __ip_options_echo. For example:
// sptr/skb are attacker-controlled skb bytes
sptr = skb_network_header(skb);
// dptr/dopt points to stack memory allocated by __icmp_send
dptr = dopt->__data;
// sopt is the corrupt skb->cb in question
if (sopt->rr) {
optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data
soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data
// this now writes potentially attacker-controlled data, over
// flowing the stack:
memcpy(dptr, sptr+sopt->rr, optlen);
}
In the icmpv6_send case, the story is similar, but not as dire, as only
IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is
worse than the iif case, but it is passed to ipv6_find_tlv, which does
a bit of bounds checking on the value.
This is easy to simulate by doing a `memset(skb->cb, 0x41,
sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by
good fortune and the rarity of icmp sending from that context that we've
avoided reports like this until now. For example, in KASAN:
BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0
Write of size 38 at addr ffff888006f1f80e by task ping/89
CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5
Call Trace:
dump_stack+0x9a/0xcc
print_address_description.constprop.0+0x1a/0x160
__kasan_report.cold+0x20/0x38
kasan_report+0x32/0x40
check_memory_region+0x145/0x1a0
memcpy+0x39/0x60
__ip_options_echo+0xa0e/0x12b0
__icmp_send+0x744/0x1700
Actually, out of the 4 drivers that do this, only gtp zeroed the cb for
the v4 case, while the rest did not. So this commit actually removes the
gtp-specific zeroing, while putting the code where it belongs in the
shared infrastructure of icmp{,v6}_ndo_send.
This commit fixes the issue by passing an empty IPCB or IP6CB along to
the functions that actually do the work. For the icmp_send, this was
already trivial, thanks to __icmp_send providing the plumbing function.
For icmpv6_send, this required a tiny bit of refactoring to make it
behave like the v4 case, after which it was straight forward.
Fixes: a2b78e9b2c ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs")
Reported-by: SinYu <liuxyon@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPJ subflows are not exposed as fds to user spaces. As such,
incoming MPJ subflows are removed from the accept queue by
tcp_check_req()/tcp_get_cookie_sock().
Later tcp_child_process() invokes subflow_data_ready() on the
parent socket regardless of the subflow kind, leading to poll
wakeups even if the later accept will block.
Address the issue by double-checking the queue state before
waking the user-space.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/164
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp re-used inet(6)_release, so the subflow sockets are ignored.
Need to invoke ip(v6)_mc_drop_socket function to ensure mcast join
resources get free'd.
Fixes: 717e79c867 ("mptcp: Add setsockopt()/getsockopt() socket operations")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/110
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the msk is closed before sending or receiving any data,
no DATA_FIN is generated, instead an MPC ack packet is
crafted out.
In the above scenario, the MPTCP protocol creates and sends a
pure ack and such packets matches also the criteria for an
MPC ack and the protocol tries first to insert MPC options,
leading to the described error.
This change addresses the issue by avoiding the insertion of an
MPC option for DATA_FIN packets or if the sub-flow is not
established.
To avoid doing multiple times the same test, fetch the data_fin
flag in a bool variable and pass it to both the interested
helpers.
Fixes: 6d0060f600 ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently we move orphaned msk sockets directly from FIN_WAIT2
state to CLOSE, with the rationale that incoming additional
data could be just dropped by the TCP stack/TW sockets.
Anyhow we miss sending MPTCP-level ack on incoming DATA_FIN,
and that may hang the peers.
Fixes: e16163b6e2 ("mptcp: refactor shutdown and close")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core DSA framework uses hsr_is_master() which would not resolve to a
valid symbol if HSR is built-into the kernel and DSA is a module.
Fixes: 18596f504a ("net: dsa: add support for offloading HSR")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20210220051222.15672-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Cork the socket while there are queued replies
Fixes:
- DRC shutdown ordering
- svc_rdma_accept() lockdep splat
-----BEGIN PGP SIGNATURE-----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=+R4U
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull more nfsd updates from Chuck Lever:
"Here are a few additional NFSD commits for the merge window:
Optimization:
- Cork the socket while there are queued replies
Fixes:
- DRC shutdown ordering
- svc_rdma_accept() lockdep splat"
* tag 'nfsd-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Further clean up svc_tcp_sendmsg()
SUNRPC: Remove redundant socket flags from svc_tcp_sendmsg()
SUNRPC: Use TCP_CORK to optimise send performance on the server
svcrdma: Hold private mutex while invoking rdma_accept()
nfsd: register pernet ops last, unregister first
handling improvements to avoid grabbing mmap_lock in some code paths
and deal with capsnaps better and a mount option cleanup.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmAzuGwTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzixPqB/9kQxU8IkCF0wOm+dm0tBW3PjYxBFuz
HryHU6WJHDbX9/enH6PgMj6ZpRwxgzDq8xUpmRKVeaPflej9PnfQyH/On+vQWRUX
WyWyBx0QqbrKYvYK0cCjHzVC5kbtBA8C/1OSSs5EkJIh518RBMkeru9pYL7+TI5x
zeQVXzOJB2Bz7y8Odd2RjlkAkix/J1m0LIggRaoWrTygz93PKXfjzhDpa4KC4WZj
W6LjnYPpYjo34poKx/3N3ZSgGP+Y3F7ZDeNfSnPB2WKs7vzcYUCpWXBSHnHTz+lK
H2O5GdmxQ6BFp4SZvYtf5e78igH/m/QmzAYGW2EmmKttOcyrb2282snb
=8MQu
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.12-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"With netfs helper library and fscache rework delayed, just a few cap
handling improvements to avoid grabbing mmap_lock in some code paths
and deal with capsnaps better and a mount option cleanup"
* tag 'ceph-for-5.12-rc1' of git://github.com/ceph/ceph-client:
ceph: defer flushing the capsnap if the Fb is used
libceph: remove osdtimeout option entirely
libceph: deprecate [no]cephx_require_signatures options
ceph: allow queueing cap/snap handling after putting cap references
ceph: clean up inode work queueing
ceph: fix flush_snap logic after putting caps
- Update NFSv2 and NFSv3 XDR decoding functions
- Further improve support for re-exporting NFS mounts
- Convert NFSD stats to per-CPU counters
- Add batch Receive posting to the server's RPC/RDMA transport
-----BEGIN PGP SIGNATURE-----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=02xw
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
- Update NFSv2 and NFSv3 XDR decoding functions
- Further improve support for re-exporting NFS mounts
- Convert NFSD stats to per-CPU counters
- Add batch Receive posting to the server's RPC/RDMA transport
* tag 'nfsd-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (65 commits)
nfsd: skip some unnecessary stats in the v4 case
nfs: use change attribute for NFS re-exports
NFSv4_2: SSC helper should use its own config.
nfsd: cstate->session->se_client -> cstate->clp
nfsd: simplify nfsd4_check_open_reclaim
nfsd: remove unused set_client argument
nfsd: find_cpntf_state cleanup
nfsd: refactor set_client
nfsd: rename lookup_clientid->set_client
nfsd: simplify nfsd_renew
nfsd: simplify process_lock
nfsd4: simplify process_lookup1
SUNRPC: Correct a comment
svcrdma: DMA-sync the receive buffer in svc_rdma_recvfrom()
svcrdma: Reduce Receive doorbell rate
svcrdma: Deprecate stat variables that are no longer used
svcrdma: Restore read and write stats
svcrdma: Convert rdma_stat_sq_starve to a per-CPU counter
svcrdma: Convert rdma_stat_recv to a per-CPU counter
svcrdma: Refactor svc_rdma_init() and svc_rdma_clean_up()
...
Here is the big set of tty/serial driver changes for 5.12-rc1.
Nothing huge, just lots of good cleanups and additions:
- Your n_tty line discipline cleanups
- vt core cleanups and reworks to make the code more "modern"
- stm32 driver additions
- tty led support added to the tty core and led layer
- minor serial driver fixups and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYCqgqw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymJYQCgnxHmkhzJ2VarTDR3cWm1gu0NU7AAoNe5wWUh
4TQbhB9LSNo78HnIVze0
=Chcg
-----END PGP SIGNATURE-----
Merge tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver changes for 5.12-rc1.
Nothing huge, just lots of good cleanups and additions:
- n_tty line discipline cleanups
- vt core cleanups and reworks to make the code more "modern"
- stm32 driver additions
- tty led support added to the tty core and led layer
- minor serial driver fixups and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits)
serial: core: Remove BUG_ON(in_interrupt()) check
vt_ioctl: Remove in_interrupt() check
dt-bindings: serial: imx: Switch to my personal address
vt: keyboard, use new API for keyboard_tasklet
serial: stm32: improve platform_get_irq condition handling in init_port
serial: ifx6x60: Remove driver for deprecated platform
tty: fix up iterate_tty_read() EOVERFLOW handling
tty: fix up hung_up_tty_read() conversion
tty: fix up hung_up_tty_write() conversion
tty: teach the n_tty ICANON case about the new "cookie continuations" too
tty: teach n_tty line discipline about the new "cookie continuations"
tty: clean up legacy leftovers from n_tty line discipline
tty: implement read_iter
tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer
serial: remove sirf prima/atlas driver
serial: mxs-auart: Remove <asm/cacheflush.h>
serial: mxs-auart: Remove serial_mxs_probe_dt()
serial: fsl_lpuart: Use of_device_get_match_data()
dt-bindings: serial: renesas,hscif: Add r8a779a0 support
tty: serial: Drop unused efm32 serial driver
...
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add two helper functions to release one table and hooks from
the netns and netlink event path.
2) Add table ownership infrastructure, this new infrastructure allows
users to bind a table (and its content) to a process through the
netlink socket.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Support also transmitting frames using the custom "8899 A"
4 byte tag.
Qingfang came up with the solution: we need to pad the
ethernet frame to 60 bytes using eth_skb_pad(), then the
switch will happily accept frames with custom tags.
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reported-by: DENG Qingfang <dqfext@gmail.com>
Fixes: efd7fe68f0 ("net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement functions 'port_mrp_add', 'port_mrp_del',
'port_mrp_add_ring_role' and 'port_mrp_del_ring_role' to call the mrp
functions from ocelot.
Also all MRP frames that arrive to CPU on queue number OCELOT_MRP_CPUQ
will be forward by the SW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for offloading MRP in HW. Currently implement the switchdev
calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP',
to allow to create MRP instances and to set the role of these instances.
Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE
which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the
DSA driver for the switch.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check the return values of the br_mrp_switchdev function.
In case of:
- BR_MRP_NONE, return the error to userspace,
- BR_MRP_SW, continue with SW implementation,
- BR_MRP_HW, continue without SW implementation,
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends the br_mrp_switchdev functions to be able to have a
better understanding what cause the issue and if the SW needs to be used
as a backup.
There are the following cases:
- when the code is compiled without CONFIG_NET_SWITCHDEV. In this case
return success so the SW can continue with the protocol. Depending
on the function, it returns 0 or BR_MRP_SW.
- when code is compiled with CONFIG_NET_SWITCHDEV and the driver doesn't
implement any MRP callbacks. In this case the HW can't run MRP so it
just returns -EOPNOTSUPP. So the SW will stop further to configure the
node.
- when code is compiled with CONFIG_NET_SWITCHDEV and the driver fully
supports any MRP functionality. In this case the SW doesn't need to do
anything. The functions will return 0 or BR_MRP_HW.
- when code is compiled with CONFIG_NET_SWITCHDEV and the HW can't run
completely the protocol but it can help the SW to run it. For
example, the HW can't support completely MRM role(can't detect when it
stops receiving MRP Test frames) but it can redirect these frames to
CPU. In this case it is possible to have a SW fallback. The SW will
try initially to call the driver with sw_backup set to false, meaning
that the HW should implement completely the role. If the driver returns
-EOPNOTSUPP, the SW will try again with sw_backup set to false,
meaning that the SW will detect when it stops receiving the frames but
it needs HW support to redirect the frames to CPU. In case the driver
returns 0 then the SW will continue to configure the node accordingly.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the enum br_mrp_hw_support that is used by the br_mrp_switchdev
functions to allow the SW to detect the cases where HW can't implement
the functionality or when SW is used as a backup.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-02-16
The following pull-request contains BPF updates for your *net-next* tree.
There's a small merge conflict between 7eeba1706e ("tcp: Add receive timestamp
support for receive zerocopy.") from net-next tree and 9cacf81f81 ("bpf: Remove
extra lock_sock for TCP_ZEROCOPY_RECEIVE") from bpf-next tree. Resolve as follows:
[...]
lock_sock(sk);
err = tcp_zerocopy_receive(sk, &zc, &tss);
err = BPF_CGROUP_RUN_PROG_GETSOCKOPT_KERN(sk, level, optname,
&zc, &len, err);
release_sock(sk);
[...]
We've added 116 non-merge commits during the last 27 day(s) which contain
a total of 156 files changed, 5662 insertions(+), 1489 deletions(-).
The main changes are:
1) Adds support of pointers to types with known size among global function
args to overcome the limit on max # of allowed args, from Dmitrii Banshchikov.
2) Add bpf_iter for task_vma which can be used to generate information similar
to /proc/pid/maps, from Song Liu.
3) Enable bpf_{g,s}etsockopt() from all sock_addr related program hooks. Allow
rewriting bind user ports from BPF side below the ip_unprivileged_port_start
range, both from Stanislav Fomichev.
4) Prevent recursion on fentry/fexit & sleepable programs and allow map-in-map
as well as per-cpu maps for the latter, from Alexei Starovoitov.
5) Add selftest script to run BPF CI locally. Also enable BPF ringbuffer
for sleepable programs, both from KP Singh.
6) Extend verifier to enable variable offset read/write access to the BPF
program stack, from Andrei Matei.
7) Improve tc & XDP MTU handling and add a new bpf_check_mtu() helper to
query device MTU from programs, from Jesper Dangaard Brouer.
8) Allow bpf_get_socket_cookie() helper also be called from [sleepable] BPF
tracing programs, from Florent Revest.
9) Extend x86 JIT to pad JMPs with NOPs for helping image to converge when
otherwise too many passes are required, from Gary Lin.
10) Verifier fixes on atomics with BPF_FETCH as well as function-by-function
verification both related to zero-extension handling, from Ilya Leoshkevich.
11) Better kernel build integration of resolve_btfids tool, from Jiri Olsa.
12) Batch of AF_XDP selftest cleanups and small performance improvement
for libbpf's xsk map redirect for newer kernels, from Björn Töpel.
13) Follow-up BPF doc and verifier improvements around atomics with
BPF_FETCH, from Brendan Jackman.
14) Permit zero-sized data sections e.g. if ELF .rodata section contains
read-only data from local variables, from Yonghong Song.
15) veth driver skb bulk-allocation for ndo_xdp_xmit, from Lorenzo Bianconi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the caller controls the TCP_CORK socket option, it is redundant
to set MSG_MORE and MSG_SENDPAGE_NOTLAST in the calls to
kernel_sendpage().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use a counter to keep track of how many requests are queued behind the
xprt->xpt_mutex, and keep TCP_CORK set until the queue is empty.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/linux-nfs/20210213202532.23146-1-trondmy@kernel.org/T/#u
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit 83aff95eb9 ("libceph: remove 'osdtimeout' option") deprecated
osdtimeout over 8 years ago, but it is still recognized. Let's remove
it entirely.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
These options were introduced in 3.19 with support for message signing
and are rather useless, as explained in commit a51983e4dd ("libceph:
add nocephx_sign_messages option"). Deprecate them.
In case there is someone out there with a cluster that lacks support
for MSG_AUTH feature (very unlikely but has to be considered since we
haven't formally raised the bar from argonaut to bobtail yet), make
nocephx_sign_messages also waive MSG_AUTH requirement. This is probably
how it should have been done in the first place -- if we aren't going
to sign, requiring the signing feature makes no sense.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Add mptcpi_local_addr_used and mptcpi_local_addr_max in struct mptcp_info.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The usage of in_interrupt() in non-core code is phased out. Ideally the
information of the calling context should be passed by the callers or the
functions be split as appropriate.
The attempt to consolidate the code by passing an arguemnt or by
distangling it failed due lack of knowledge about this driver and because
the call chains are hard to follow.
As a stop gap use netif_rx_any_context() which invokes the correct code path
depending on context and confines the in_interrupt() usage to core code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
My prior cleanup missed that tcp_data_ready() has to look at SOCK_DONE.
Otherwise, an application using SO_RCVLOWAT will not get EPOLLIN event
if a FIN is received in the middle of expected payload.
The reason SOCK_DONE is not examined in tcp_epollin_ready()
is that tcp_poll() catches the FIN because tcp_fin()
is also setting RCV_SHUTDOWN into sk->sk_shutdown
Fixes: 05dc72aba3 ("tcp: factorize logic into tcp_epollin_ready()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Wei Wang <weiwan@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The prototype of br_vlan_filter_toggle was updated to include a netlink
extack, but the stub definition wasn't, which results in a build error
when CONFIG_BRIDGE_VLAN_FILTERING=n.
Fixes: 9e781401cb ("net: bridge: propagate extack through store_bridge_parm")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch is confused by the fact that a 32-bit BIT(port) macro is passed
as argument to the ocelot_ifh_set_dest function and warns:
ocelot_xmit() warn: should '(((1))) << (dp->index)' be a 64 bit type?
seville_xmit() warn: should '(((1))) << (dp->index)' be a 64 bit type?
The destination port mask is copied into a 12-bit field of the packet,
starting at bit offset 67 and ending at 56.
So this DSA tagging protocol supports at most 12 bits, which is clearly
less than 32. Attempting to send to a port number > 12 will cause the
packing() call to truncate way before there will be 32-bit truncation
due to type promotion of the BIT(port) argument towards u64.
Therefore, smatch's fears that BIT(port) will do the wrong thing and
cause unexpected truncation for "port" values >= 32 are unfounded.
Nonetheless, let's silence the warning by explicitly passing an u64
value to ocelot_ifh_set_dest, such that the compiler does not need to do
a questionable type promotion.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A userspace daemon like firewalld might need to monitor for netlink
updates to detect its ruleset removal by the (global) flush ruleset
command to ensure ruleset persistency. This adds extra complexity from
userspace and, for some little time, the firewall policy is not in
place.
This patch adds the NFT_TABLE_F_OWNER flag which allows a userspace
program to own the table that creates in exclusivity.
Tables that are owned...
- can only be updated and removed by the owner, non-owners hit EPERM if
they try to update it or remove it.
- are destroyed when the owner closes the netlink socket or the process
is gone (implicit netlink socket closure).
- are skipped by the global flush ruleset command.
- are listed in the global ruleset.
The userspace process that sets on the NFT_TABLE_F_OWNER flag need to
leave open the netlink socket.
A new NFTA_TABLE_OWNER netlink attribute specifies the netlink port ID
to identify the owner from userspace.
This patch also updates error reporting when an unknown table flag is
specified to change it from EINVAL to EOPNOTSUPP given that EINVAL is
usually reserved to report for malformed netlink messages to userspace.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
RDMA core mutex locking was restructured by commit d114c6feed
("RDMA/cma: Add missing locking to rdma_accept()") [Aug 2020]. When
lock debugging is enabled, the RPC/RDMA server trips over the new
lockdep assertion in rdma_accept() because it doesn't call
rdma_accept() from its CM event handler.
As a temporary fix, have svc_rdma_accept() take the handler_mutex
explicitly. In the meantime, let's consider how to restructure the
RPC/RDMA transport to invoke rdma_accept() from the proper context.
Calls to svc_rdma_accept() are serialized with calls to
svc_rdma_free() by the generic RPC server layer.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/linux-rdma/20210209154014.GO4247@nvidia.com/
Fixes: d114c6feed ("RDMA/cma: Add missing locking to rdma_accept()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Some drivers can't dynamically change the VLAN filtering option, or
impose some restrictions, it would be nice to propagate this info
through netlink instead of printing it to a kernel log that might never
be read. Also netlink extack includes the module that emitted the
message, which means that it's easier to figure out which ones are
driver-generated errors as opposed to command misuse.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow drivers to communicate their restrictions to user space directly,
instead of printing to the kernel log. Where the conversion would have
been lossy and things like VLAN ID could no longer be conveyed (due to
the lack of support for printf format specifier in netlink extack), I
chose to keep the messages in full form to the kernel log only, and
leave it up to individual driver maintainers to move more messages to
extack.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The benefit is the ability to propagate errors from switchdev drivers
for the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING and
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL attributes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bridge sysfs interface stores parameters for the STP, VLAN,
multicast etc subsystems using a predefined function prototype.
Sometimes the underlying function being called supports a netlink
extended ack message, and we ignore it.
Let's expand the store_bridge_parm function prototype to include the
extack, and just print it to console, but at least propagate it where
applicable. Where not applicable, create a shim function in the
br_sysfs_br.c file that discards the extra function argument.
This patch allows us to propagate the extack argument to
br_vlan_set_default_pvid, br_vlan_set_proto and br_vlan_filter_toggle,
and from there, further up in br_changelink from br_netlink.c.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is identical with br_vlan_filter_toggle.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For TX timestamping, we use the felix_txtstamp method which is common
with the regular (non-8021q) ocelot tagger. This method says that skb
deferral is needed, prepares a timestamp request ID, and puts a clone of
the skb in a queue waiting for the timestamp IRQ.
felix_txtstamp is called by dsa_skb_tx_timestamp() just before the
tagger's xmit method. In the tagger xmit, we divert the packets
classified by dsa_skb_tx_timestamp() as PTP towards the MMIO-based
injection registers, and we declare them as dead towards dsa_slave_xmit.
If not PTP, we proceed with normal tag_8021q stuff.
Then the timestamp IRQ fires, the clone queued up from felix_txtstamp is
matched to the TX timestamp retrieved from the switch's FIFO based on
the timestamp request ID, and the clone is delivered to the stack.
On RX, thanks to the VCAP IS2 rule that redirects the frames with an
EtherType for 1588 towards two destinations:
- the CPU port module (for MMIO based extraction) and
- if the "no XTR IRQ" workaround is in place, the dsa_8021q CPU port
the relevant data path processing starts in the ptp_classify_raw BPF
classifier installed by DSA in the RX data path (post tagger, which is
completely unaware that it saw a PTP packet).
This time we can't reuse the same implementation of .port_rxtstamp that
also works with the default ocelot tagger. That is because felix_rxtstamp
is given an skb with a freshly stripped DSA header, and it says "I don't
need deferral for its RX timestamp, it's right in it, let me show you";
and it just points to the header right behind skb->data, from where it
unpacks the timestamp and annotates the skb with it.
The same thing cannot happen with tag_ocelot_8021q, because for one
thing, the skb did not have an extraction frame header in the first
place, but a VLAN tag with no timestamp information. So the code paths
in felix_rxtstamp for the regular and 8021q tagger are completely
independent. With tag_8021q, the timestamp must come from the packet's
duplicate delivered to the CPU port module, but there is potentially
complex logic to be handled [ and prone to reordering ] if we were to
just start reading packets from the CPU port module, and try to match
them to the one we received over Ethernet and which needs an RX
timestamp. So we do something simple: we tell DSA "give me some time to
think" (we request skb deferral by returning false from .port_rxtstamp)
and we just drop the frame we got over Ethernet with no attempt to match
it to anything - we just treat it as a notification that there's data to
be processed from the CPU port module's queues. Then we proceed to read
the packets from those, one by one, which we deliver up the stack,
timestamped, using netif_rx - the same function that any driver would
use anyway if it needed RX timestamp deferral. So the assumption is that
we'll come across the PTP packet that triggered the CPU extraction
notification eventually, but we don't know when exactly. Thanks to the
VCAP IS2 trap/redirect rule and the exclusion of the CPU port module
from the flooding replicators, only PTP frames should be present in the
CPU port module's RX queues anyway.
There is just one conflict between the VCAP IS2 trapping rule and the
semantics of the BPF classifier. Namely, ptp_classify_raw() deems
general messages as non-timestampable, but still, those are trapped to
the CPU port module since they have an EtherType of ETH_P_1588. So, if
the "no XTR IRQ" workaround is in place, we need to run another BPF
classifier on the frames extracted over MMIO, to avoid duplicates being
sent to the stack (once over Ethernet, once over MMIO). It doesn't look
like it's possible to install VCAP IS2 rules based on keys extracted
from the 1588 frame headers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the tag_8021q tagger is software-defined, it has no means by
itself for retrieving hardware timestamps of PTP event messages.
Because we do want to support PTP on ocelot even with tag_8021q, we need
to use the CPU port module for that. The RX timestamp is present in the
Extraction Frame Header. And because we can't use NPI mode which redirects
the CPU queues to an "external CPU" (meaning the ARM CPU running Linux),
then we need to poll the CPU port module through the MMIO registers to
retrieve TX and RX timestamps.
Sadly, on NXP LS1028A, the Felix switch was integrated into the SoC
without wiring the extraction IRQ line to the ARM GIC. So, if we want to
be notified of any PTP packets received on the CPU port module, we have
a problem.
There is a possible workaround, which is to use the Ethernet CPU port as
a notification channel that packets are available on the CPU port module
as well. When a PTP packet is received by the DSA tagger (without timestamp,
of course), we go to the CPU extraction queues, poll for it there, then
we drop the original Ethernet packet and masquerade the packet retrieved
over MMIO (plus the timestamp) as the original when we inject it up the
stack.
Create a quirk in struct felix is selected by the Felix driver (but not
by Seville, since that doesn't support PTP at all). We want to do this
such that the workaround is minimally invasive for future switches that
don't require this workaround.
The only traffic for which we need timestamps is PTP traffic, so add a
redirection rule to the CPU port module for this. Currently we only have
the need for PTP over L2, so redirection rules for UDP ports 319 and 320
are TBD for now.
Note that for the workaround of matching of PTP-over-Ethernet-port with
PTP-over-MMIO queues to work properly, both channels need to be
absolutely lossless. There are two parts to achieving that:
- We keep flow control enabled on the tag_8021q CPU port
- We put the DSA master interface in promiscuous mode, so it will never
drop a PTP frame (for the profiles we are interested in, these are
sent to the multicast MAC addresses of 01-80-c2-00-00-0e and
01-1b-19-00-00-00).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ocelot tagger is a hot mess currently, it relies on memory
initialized by the attached driver for basic frame transmission.
This is against all that DSA tagging protocols stand for, which is that
the transmission and reception of a DSA-tagged frame, the data path,
should be independent from the switch control path, because the tag
protocol is in principle hot-pluggable and reusable across switches
(even if in practice it wasn't until very recently). But if another
driver like dsa_loop wants to make use of tag_ocelot, it couldn't.
This was done to have common code between Felix and Ocelot, which have
one bit difference in the frame header format. Quoting from commit
67c2404922 ("net: dsa: felix: create a template for the DSA tags on
xmit"):
Other alternatives have been analyzed, such as:
- Create a separate tag_seville.c: too much code duplication for just 1
bit field difference.
- Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like
tag_brcm.c, which would have a separate .xmit function. Again, too
much code duplication for just 1 bit field difference.
- Allocate the template from the init function of the tag_ocelot.c
module, instead of from the driver: couldn't figure out a method of
accessing the correct port template corresponding to the correct
tagger in the .xmit function.
The really interesting part is that Seville should have had its own
tagging protocol defined - it is not compatible on the wire with Ocelot,
even for that single bit. In principle, a packet generated by
DSA_TAG_PROTO_OCELOT when booted on NXP LS1028A would look in a certain
way, but when booted on NXP T1040 it would look differently. The reverse
is also true: a packet generated by a Seville switch would be
interpreted incorrectly by Wireshark if it was told it was generated by
an Ocelot switch.
Actually things are a bit more nuanced. If we concentrate only on the
DSA tag, what I said above is true, but Ocelot/Seville also support an
optional DSA tag prefix, which can be short or long, and it is possible
to distinguish the two taggers based on an integer constant put in that
prefix. Nonetheless, creating a separate tagger is still justified,
since the tag prefix is optional, and without it, there is again no way
to distinguish.
Claiming backwards binary compatibility is a bit more tough, since I've
already changed the format of tag_ocelot once, in commit 5124197ce5
("net: dsa: tag_ocelot: use a short prefix on both ingress and egress").
Therefore I am not very concerned with treating this as a bugfix and
backporting it to stable kernels (which would be another mess due to the
fact that there would be lots of conflicts with the other DSA_TAG_PROTO*
definitions). It's just simpler to say that the string values of the
taggers have ABI value starting with kernel 5.12, which will be when the
changing of tag protocol via /sys/class/net/<dsa-master>/dsa/tagging
goes live.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is one place where we cannot avoid accessing driver data, and that
is 2-step PTP TX timestamping, since the switch wants us to provide a
timestamp request ID through the injection header, which naturally must
come from a sequence number kept by the driver (it is generated by the
.port_txtstamp method prior to the tagger's xmit).
However, since other drivers like dsa_loop do not claim PTP support
anyway, the DSA_SKB_CB(skb)->clone will always be NULL anyway, so if we
move all PTP-related dereferences of struct ocelot and struct ocelot_port
into a separate function, we can effectively ensure that this is dead
code when the ocelot tagger is attached to non-ocelot switches, and the
stateful portion of the tagger is more self-contained.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Injection Frame Header and Extraction Frame Header that the switch
prepends to frames over the NPI port is also prepended to frames
delivered over the CPU port module's queues.
Let's unify the handling of the frame headers by making the ocelot
driver call some helpers exported by the DSA tagger. Among other things,
this allows us to get rid of the strange cpu_to_be32 when transmitting
the Injection Frame Header on ocelot, since the packing API uses
network byte order natively (when "quirks" is 0).
The comments above ocelot_gen_ifh talk about setting pop_cnt to 3, and
the cpu extraction queue mask to something, but the code doesn't do it,
so we don't do it either.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taggers should be written to do something valid irrespective of the
switch driver that they are attached to. This is even more true now,
because since the introduction of the .change_tag_protocol method, a
certain tagger is not necessarily strictly associated with a driver any
longer, and I would like to be able to test all taggers with dsa_loop in
the future.
In the case of ocelot, it needs to move the classified VLAN from the DSA
tag into the skb if the port is VLAN-aware. We can allow it to do that
by looking at the dp->vlan_filtering property, no need to invoke
structures which are specific to ocelot.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
napi_frags_finish() and napi_skb_finish() can only be called inside
NAPI Rx context, so we can feed NAPI cache with skbuff_heads that
got NAPI_MERGED_FREE verdict instead of immediate freeing.
Replace __kfree_skb() with __kfree_skb_defer() in napi_skb_finish()
and move napi_skb_free_stolen_head() to skbuff.c, so it can drop skbs
to NAPI cache.
As many drivers call napi_alloc_skb()/napi_get_frags() on their
receive path, this becomes especially useful.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
{,__}napi_alloc_skb() is mostly used either for optional non-linear
receive methods (usually controlled via Ethtool private flags and off
by default) and/or for Rx copybreaks.
Use __napi_build_skb() here for obtaining skbuff_heads from NAPI cache
instead of inplace allocations. This includes both kmalloc and page
frag paths.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the old and forgotten SKB_ALLOC_NAPI to add an option to get
an skbuff_head from the NAPI cache instead of inplace allocation
inside __alloc_skb().
This implies that the function is called from softirq or BH-off
context, not for allocating a clone or from a distant node.
Cc: Alexander Duyck <alexander.duyck@gmail.com> # Simplified flags check
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of just bulk-flushing skbuff_heads queued up through
napi_consume_skb() or __kfree_skb_defer(), try to reuse them
on allocation path.
If the cache is empty on allocation, bulk-allocate the first
16 elements, which is more efficient than per-skb allocation.
If the cache is full on freeing, bulk-wipe the second half of
the cache (32 elements).
This also includes custom KASAN poisoning/unpoisoning to be
double sure there are no use-after-free cases.
To not change current behaviour, introduce a new function,
napi_build_skb(), to optionally use a new approach later
in drivers.
Note on selected bulk size, 16:
- this equals to XDP_BULK_QUEUE_SIZE, DEV_MAP_BULK_SIZE
and especially VETH_XDP_BATCH, which is also used to
bulk-allocate skbuff_heads and was tested on powerful
setups;
- this also showed the best performance in the actual
test series (from the array of {8, 16, 32}).
Suggested-by: Edward Cree <ecree.xilinx@gmail.com> # Divide on two halves
Suggested-by: Eric Dumazet <edumazet@google.com> # KASAN poisoning
Cc: Dmitry Vyukov <dvyukov@google.com> # Help with KASAN
Cc: Paolo Abeni <pabeni@redhat.com> # Reduced batch size
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
NAPI cache structures will be used for allocating skbuff_heads,
so move their declarations a bit upper.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function isn't much needed as NAPI skb queue gets bulk-freed
anyway when there's no more room, and even may reduce the efficiency
of bulk operations.
It will be even less needed after reusing skb cache on allocation path,
so remove it and this way lighten network softirqs a bit.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just call __build_skb_around() instead of open-coding it.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use unlikely() annotations for skbuff_head and data similarly to the
two other allocation functions and remove totally redundant goto.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
__build_skb_around() can never fail and always returns passed skb.
Make it return void to simplify and optimize the code.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eversince the introduction of __kmalloc_reserve(), "ip" argument
hasn't been used. _RET_IP_ is embedded inside
kmalloc_node_track_caller().
Remove the redundant macro and rename the function after it.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation before reusing several functions in all three skb
allocation variants, move __alloc_skb() next to the
__netdev_alloc_skb() and __napi_alloc_skb().
No functional changes.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both tcp_data_ready() and tcp_stream_is_readable() share the same logic.
Add tcp_epollin_ready() helper to avoid duplication.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be
expressed by the bridge through switchdev, and not all of them can be
emulated by DSA mid-layer API at the same time.
One possible configuration is when the bridge offloads the port flags
using a mask that has a single bit set - therefore only one feature
should change. However, DSA currently groups together unicast and
multicast flooding in the .port_egress_floods method, which limits our
options when we try to add support for turning off broadcast flooding:
do we extend .port_egress_floods with a third parameter which b53 and
mv88e6xxx will ignore? But that means that the DSA layer, which
currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will
see that .port_egress_floods is implemented, and will report that all 3
types of flooding are supported - not necessarily true.
Another configuration is when the user specifies more than one flag at
the same time, in the same netlink message. If we were to create one
individual function per offloadable bridge port flag, we would limit the
expressiveness of the switch driver of refusing certain combinations of
flag values. For example, a switch may not have an explicit knob for
flooding of unknown multicast, just for flooding in general. In that
case, the only correct thing to do is to allow changes to BR_FLOOD and
BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having
a separate .port_set_unicast_flood and .port_set_multicast_flood would
not allow the driver to possibly reject that.
Also, DSA doesn't consider it necessary to inform the driver that a
SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it
just calls .port_egress_floods for the CPU port. When we'll add support
for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real
problem because the flood settings will need to be held statefully in
the DSA middle layer, otherwise changing the mrouter port attribute will
impact the flooding attribute. And that's _assuming_ that the underlying
hardware doesn't have anything else to do when a multicast router
attaches to a port than flood unknown traffic to it. If it does, there
will need to be a dedicated .port_set_mrouter anyway.
So we need to let the DSA drivers see the exact form that the bridge
passes this switchdev attribute in, otherwise we are standing in the
way. Therefore we also need to use this form of language when
communicating to the driver that it needs to configure its initial
(before bridge join) and final (after bridge leave) port flags.
The b53 and mv88e6xxx drivers are converted to the passthrough API and
their implementation of .port_egress_floods is split into two: a
function that configures unicast flooding and another for multicast.
The mv88e6xxx implementation is quite hairy, and it turns out that
the implementations of unknown unicast flooding are actually the same
for 6185 and for 6352:
behind the confusing names actually lie two individual bits:
NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2)
NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3)
so there was no reason to entangle them in the first place.
Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of
PORT_CTL0, which has the exact same bit index. I have left the
implementations separate though, for the only reason that the names are
different enough to confuse me, since I am not able to double-check with
a user manual. The multicast flooding setting for 6185 is in a different
register than for 6352 though.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This switchdev attribute offers a counterproductive API for a driver
writer, because although br_switchdev_set_port_flag gets passed a
"flags" and a "mask", those are passed piecemeal to the driver, so while
the PRE_BRIDGE_FLAGS listener knows what changed because it has the
"mask", the BRIDGE_FLAGS listener doesn't, because it only has the final
value. But certain drivers can offload only certain combinations of
settings, like for example they cannot change unicast flooding
independently of multicast flooding - they must be both on or both off.
The way the information is passed to switchdev makes drivers not
expressive enough, and unable to reject this request ahead of time, in
the PRE_BRIDGE_FLAGS notifier, so they are forced to reject it during
the deferred BRIDGE_FLAGS attribute, where the rejection is currently
ignored.
This patch also changes drivers to make use of the "mask" field for edge
detection when possible.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For a DSA switch port operating in standalone mode, address learning
doesn't make much sense since that is a bridge function. In fact,
address learning even breaks setups such as this one:
+---------------------------------------------+
| |
| +-------------------+ |
| | br0 | send receive |
| +--------+-+--------+ +--------+ +--------+ |
| | | | | | | | | |
| | swp0 | | swp1 | | swp2 | | swp3 | |
| | | | | | | | | |
+-+--------+-+--------+-+--------+-+--------+-+
| ^ | ^
| | | |
| +-----------+ |
| |
+--------------------------------+
because if the switch has a single FDB (can offload a single bridge)
then source address learning on swp3 can "steal" the source MAC address
of swp2 from br0's FDB, because learning frames coming from swp2 will be
done twice: first on the swp1 ingress port, second on the swp3 ingress
port. So the hardware FDB will become out of sync with the software
bridge, and when swp2 tries to send one more packet towards swp1, the
ASIC will attempt to short-circuit the forwarding path and send it
directly to swp3 (since that's the last port it learned that address on),
which it obviously can't, because swp3 operates in standalone mode.
So DSA drivers operating in standalone mode should still configure a
list of bridge port flags even when they are standalone. Currently DSA
attempts to call dsa_port_bridge_flags with 0, which disables egress
flooding of unknown unicast and multicast, something which doesn't make
much sense. For the switches that implement .port_egress_floods - b53
and mv88e6xxx, it probably doesn't matter too much either, since they
can possibly inject traffic from the CPU into a standalone port,
regardless of MAC DA, even if egress flooding is turned off for that
port, but certainly not all DSA switches can do that - sja1105, for
example, can't. So it makes sense to use a better common default there,
such as "flood everything".
It should also be noted that what DSA calls "dsa_port_bridge_flags()"
is a degenerate name for just calling .port_egress_floods(), since
nothing else is implemented - not learning, in particular. But disabling
address learning, something that this driver is also coding up for, will
be supported by individual drivers once .port_egress_floods is replaced
with a more generic .port_bridge_flags.
Previous attempts to code up this logic have been in the common bridge
layer, but as pointed out by Ido Schimmel, there are corner cases that
are missed when doing that:
https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/
So, at least for now, let's leave DSA in charge of setting port flags
before and after the bridge join and leave.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the netlink interface, propagate errors through extack rather than
simply printing them to the console. For the sysfs interface, we still
print to the console, but at least that's one layer higher than in
switchdev, which also allows us to silently ignore the offloading of
flags if that is ever needed in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If for example this command:
ip link set swp0 type bridge_slave flood off mcast_flood off learning off
succeeded at configuring BR_FLOOD and BR_MCAST_FLOOD but not at
BR_LEARNING, there would be no attempt to revert the partial state in
any way. Arguably, if the user changes more than one flag through the
same netlink command, this one _should_ be all or nothing, which means
it should be passed through switchdev as all or nothing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a struct switchdev_attr is notified through switchdev, there is no
way to report informational messages, unlike for struct switchdev_obj.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the following command:
# tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
$tcflags dst_ip 192.0.2.2 ip_ttl 63 action drop
doesn't drop all IPv4 packets that match the configured TTL / destination
address. In particular, if "fragment offset" or "more fragments" have non
zero value in the IPv4 header, setting of FLOW_DISSECTOR_KEY_IP is simply
ignored. Fix this dissecting IPv4 TTL and TOS before fragment info; while
at it, add a selftest for tc flower's match on 'ip_ttl' that verifies the
correct behavior.
Fixes: 518d8a2e9b ("net/flow_dissector: add support for dissection of misc ip header fields")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* more minstrel work from Felix to reduce the
probing overhead
* QoS for nl80211 control port frames
* STBC injection support
* and a couple of small fixes
-----BEGIN PGP SIGNATURE-----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=PXD5
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-02-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Last set of updates:
* more minstrel work from Felix to reduce the
probing overhead
* QoS for nl80211 control port frames
* STBC injection support
* and a couple of small fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As udp_port_cfg struct changes its members with dependency on IPv6
configuration, the code in rxrpc should also check for IPv6.
Fixes: 1a9b86c9fd ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a DDP broadcast packet is sent out to a non-gateway target, it is
also looped back. There is a potential for the loopback device to have a
longer hardware header length than the original target route's device,
which can result in the skb not being created with enough room for the
loopback device's hardware header. This patch fixes the issue by
determining that a loopback will be necessary prior to allocating the
skb, and if so, ensuring the skb has enough room.
This was discovered while testing a new driver that creates a LocalTalk
network interface (LTALK_HLEN = 1). It caused an skb_under_panic.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow userspace (mptcpd) to subscribe to mptcp genl multicast events.
This implementation reuses the same event API as the mptcp kernel fork
to ease integration of existing tools, e.g. mptcpd.
Supported events include:
1. start and close of an mptcp connection
2. start and close of subflows (joins)
3. announce and withdrawals of addresses
4. subflow priority (backup/non-backup) change.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once event support is added this may need to allocate memory while msk
lock is held with softirqs disabled.
Not using lock_fast also allows to do the allocation with GFP_KERNEL.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the first/initial subflow to the existing functions so they can
pass this on to the notification handler that is added later in the
series.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case mptcp socket is already dead the entire mptcp socket
will be freed. We can avoid the close check in this case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When remote side closes a subflow we should schedule the worker to
dispose of the subflow in a timely manner.
Otherwise, SF_CLOSED event won't be generated until the mptcp
socket itself is closing or local side is closing another subflow.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for subflow close events:
When mptcp connection is torn down its enough to send the mptcp socket
close notification rather than a subflow close event for all of the
subflows followed by the mptcp close event.
This splits the helper: mptcp_close_ssk() will emit the close
notification, __mptcp_close_ssk will not.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allows to make some functions static and avoids acquire of the pm
spinlock in protocol.c.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The use-case for dropping the MTU check when TC-BPF does redirect to
ingress, is described by Eyal Birger in email[0]. The summary is the
ability to increase packet size (e.g. with IPv6 headers for NAT64) and
ingress redirect packet and let normal netstack fragment packet as needed.
[0] https://lore.kernel.org/netdev/CAHsH6Gug-hsLGHQ6N0wtixdOa85LDZ3HNRHVd0opR=19Qo4W4Q@mail.gmail.com/
V15:
- missing static for function declaration
V9:
- Make net_device "up" (IFF_UP) check explicit in skb_do_redirect
V4:
- Keep net_device "up" (IFF_UP) check.
- Adjustment to handle bpf_redirect_peer() helper
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287790971.790810.11785274340154740591.stgit@firesoul
This BPF-helper bpf_check_mtu() works for both XDP and TC-BPF programs.
The SKB object is complex and the skb->len value (accessible from
BPF-prog) also include the length of any extra GRO/GSO segments, but
without taking into account that these GRO/GSO segments get added
transport (L4) and network (L3) headers before being transmitted. Thus,
this BPF-helper is created such that the BPF-programmer don't need to
handle these details in the BPF-prog.
The API is designed to help the BPF-programmer, that want to do packet
context size changes, which involves other helpers. These other helpers
usually does a delta size adjustment. This helper also support a delta
size (len_diff), which allow BPF-programmer to reuse arguments needed by
these other helpers, and perform the MTU check prior to doing any actual
size adjustment of the packet context.
It is on purpose, that we allow the len adjustment to become a negative
result, that will pass the MTU check. This might seem weird, but it's not
this helpers responsibility to "catch" wrong len_diff adjustments. Other
helpers will take care of these checks, if BPF-programmer chooses to do
actual size adjustment.
V14:
- Improve man-page desc of len_diff.
V13:
- Enforce flag BPF_MTU_CHK_SEGS cannot use len_diff.
V12:
- Simplify segment check that calls skb_gso_validate_network_len.
- Helpers should return long
V9:
- Use dev->hard_header_len (instead of ETH_HLEN)
- Annotate with unlikely req from Daniel
- Fix logic error using skb_gso_validate_network_len from Daniel
V6:
- Took John's advice and dropped BPF_MTU_CHK_RELAX
- Returned MTU is kept at L3-level (like fib_lookup)
V4: Lot of changes
- ifindex 0 now use current netdev for MTU lookup
- rename helper from bpf_mtu_check to bpf_check_mtu
- fix bug for GSO pkt length (as skb->len is total len)
- remove __bpf_len_adj_positive, simply allow negative len adj
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287790461.790810.3429728639563297353.stgit@firesoul
The BPF-helpers for FIB lookup (bpf_xdp_fib_lookup and bpf_skb_fib_lookup)
can perform MTU check and return BPF_FIB_LKUP_RET_FRAG_NEEDED. The BPF-prog
don't know the MTU value that caused this rejection.
If the BPF-prog wants to implement PMTU (Path MTU Discovery) (rfc1191) it
need to know this MTU value for the ICMP packet.
Patch change lookup and result struct bpf_fib_lookup, to contain this MTU
value as output via a union with 'tot_len' as this is the value used for
the MTU lookup.
V5:
- Fixed uninit value spotted by Dan Carpenter.
- Name struct output member mtu_result
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287789952.790810.13134700381067698781.stgit@firesoul
BPF end-user on Cilium slack-channel (Carlo Carraro) wants to use
bpf_fib_lookup for doing MTU-check, but *prior* to extending packet size,
by adjusting fib_params 'tot_len' with the packet length plus the expected
encap size. (Just like the bpf_check_mtu helper supports). He discovered
that for SKB ctx the param->tot_len was not used, instead skb->len was used
(via MTU check in is_skb_forwardable() that checks against netdev MTU).
Fix this by using fib_params 'tot_len' for MTU check. If not provided (e.g.
zero) then keep existing TC behaviour intact. Notice that 'tot_len' for MTU
check is done like XDP code-path, which checks against FIB-dst MTU.
V16:
- Revert V13 optimization, 2nd lookup is against egress/resulting netdev
V13:
- Only do ifindex lookup one time, calling dev_get_by_index_rcu().
V10:
- Use same method as XDP for 'tot_len' MTU check
Fixes: 4c79579b44 ("bpf: Change bpf_fib_lookup to return lookup status")
Reported-by: Carlo Carraro <colrack@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/161287789444.790810.15247494756551413508.stgit@firesoul
Multiple BPF-helpers that can manipulate/increase the size of the SKB uses
__bpf_skb_max_len() as the max-length. This function limit size against
the current net_device MTU (skb->dev->mtu).
When a BPF-prog grow the packet size, then it should not be limited to the
MTU. The MTU is a transmit limitation, and software receiving this packet
should be allowed to increase the size. Further more, current MTU check in
__bpf_skb_max_len uses the MTU from ingress/current net_device, which in
case of redirects uses the wrong net_device.
This patch keeps a sanity max limit of SKB_MAX_ALLOC (16KiB). The real limit
is elsewhere in the system. Jesper's testing[1] showed it was not possible
to exceed 8KiB when expanding the SKB size via BPF-helper. The limiting
factor is the define KMALLOC_MAX_CACHE_SIZE which is 8192 for
SLUB-allocator (CONFIG_SLUB) in-case PAGE_SIZE is 4096. This define is
in-effect due to this being called from softirq context see code
__gfp_pfmemalloc_flags() and __do_kmalloc_node(). Jakub's testing showed
that frames above 16KiB can cause NICs to reset (but not crash). Keep this
sanity limit at this level as memory layer can differ based on kernel
config.
[1] https://github.com/xdp-project/bpf-examples/tree/master/MTU-tests
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287788936.790810.2937823995775097177.stgit@firesoul
This patch adds support for STBC encoding to the radiotap tx parse
function. Prior to this change adding the STBC flag to the radiotap
header did not encode frames with STBC.
Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>
Link: https://lore.kernel.org/r/20210125150744.83065-1-borgers@mi.fu-berlin.de
[use u8_get_bits/u32_encode_bits instead of manually shifting]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This was added to mitigate the effects of too much sampling on devices that
use a static global fallback table instead of configurable multi-rate retry.
Now that the sampling algorithm is improved, this code path no longer performs
any better than the standard probing on affected devices.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-6-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The biggest flaw in current minstrel_ht is the fact that it needs way too
many probing packets to be able to quickly find the best rate.
Depending on the wifi hardware and operating mode, this can significantly
reduce throughput when not operating at the highest available data rate.
In order to be able to significantly reduce the amount of rate sampling,
we need a much smarter selection of probing rates.
The new approach introduced by this patch maintains a limited set of
available rates to be tested during a statistics window.
They are split into distinct categories:
- MINSTREL_SAMPLE_TYPE_INC - incremental rate upgrade:
Pick the next rate group and find the first rate that is faster than
the current max. throughput rate
- MINSTREL_SAMPLE_TYPE_JUMP - random testing of higher rates:
Pick a random rate from the next group that is faster than the current
max throughput rate. This allows faster adaptation when the link changes
significantly
- MINSTREL_SAMPLE_TYPE_SLOW - test a rate between max_prob, max_tp2 and
max_tp in order to reduce the gap between them
In order to prioritize sampling, every 6 attempts are split into 3x INC,
2x JUMP, 1x SLOW.
Available rates are checked and refilled on every stats window update.
With this approach, we finally get a very small delta in throughput when
comparing setting the optimal data rate as a fixed rate vs normal rate
control operation.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to more gracefully be able to fall back to lower rates without too
much throughput fluctuations, initialize all untested rates below tested ones
to the maximum probabilty of higher rates.
Usually this leads to untested lower rates getting initialized with a
probability value of 100%, making them better candidates for fallback without
having to rely on random probing
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Get rid of a lot of divisions and modulo operations
Reduces code size and improves performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sparse started warning on this function because we can potentially
return an uninitialized value. The reason is that if the caller
passes a min_bw value that is higher then the last value in bws[], we
will not go into the loop and reg_rule will remain initialized. This
cannot happen because the only caller of this function uses either 1
or 20 in min_bw, but the function will be more robust if we
pre-initialize the value.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210204154439.6c884ea7281c.I257278d03b0c1ae0aa6631672cfa48f1a95d5996@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The multiplication of the u32 variables tx_time and estimated_retx is
performed using a 32 bit multiplication and the result is stored in
a u64 result. This has a potential u32 overflow issue, so avoid this
by casting tx_time to a u64 to force a 64 bit multiply.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 050ac52cbe ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210205175352.208841-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch unifies sending control port frames
over nl80211 and AF_PACKET sockets a little more.
Before this patch, EAPOL frames got QoS prioritization
only when using AF_PACKET sockets.
__ieee80211_select_queue only selects a QoS-enabled queue
for control port frames, when the control port protocol
is set correctly on the skb. For the AF_PACKET path this
works, but the nl80211 path used ETH_P_802_3.
Another check for injected frames in wme.c then prevented
the QoS TID to be copied in the frame.
In order to fix this, get rid of the frame injection marking
for nl80211 ctrl port and set the correct ethernet protocol.
Please note:
An erlier version of this path tried to prevent
frame aggregation for control port frames in order to speed up
the initial connection setup a little. This seemed to cause
issues on my older Intel dvm-based hardware, and was therefore
removed again. Future commits which try to reintroduce this
have to check carefully how hw behaves with aggregated and
non-aggregated traffic for the same TID.
My NIC: Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20210206115112.567881-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The ieee80211 class registers a callback which actually does nothing.
Given that the callback is optional, and all its accesses are protected
by a NULL check, remove it entirely.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Link: https://lore.kernel.org/r/20210208113356.4105-1-mcroce@linux.microsoft.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Compile-in the socket RX queue mapping field and logic when TLS_DEVICE
is enabled. This allows device drivers to pick the recorded socket's
RX queue and use it for streams distribution.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a new config SOCK_RX_QUEUE_MAPPING to compile-in the socket
RX queue field and logic, instead of the XPS config.
This breaks dependency in XPS, and allows selecting it from non-XPS
use cases, as we do in the next patch.
In addition, use the new flag to wrap the logic in sk_rx_queue_get()
and protect access to the sk_rx_queue_mapping field, while keeping
the function exposed unconditionally, just like sk_rx_queue_set()
and sk_rx_queue_clear().
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we do not schedule the MPTCP retransmission
timer after pushing the data when such action happens
in the subflow context.
This may cause hang-up on active-backup scenarios, or
even when only single subflow msks are involved, if we lost
some peer's ack.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move mptcp_cleanup_rbuf() related checks inside the mentioned
helper and extend them to mirror TCP checks more closely.
Additionally drop the 'rmem_pending' hack, since commit 879526030c
("mptcp: protect the rx path with the msk socket spinlock") we
can use instead 'rmem_released'.
Fixes: ea4ca586b1 ("mptcp: refine MPTCP-level ack scheduling")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp subflow route_req() callback performs the subflow
req initialization after the route_req() check. If the latter
fails, mptcp-specific bits of the current request sockets
are left uninitialized.
The above causes bad things at req socket disposal time, when
the mptcp resources are cleared.
This change addresses the issue by splitting subflow_init_req()
into the actual initialization and the mptcp-specific checks.
The initialization is moved before any possibly failing check.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes: 7ea851d19b ("tcp: merge 'init_req' and 'route_req' functions")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzkaller was able to trigger the following splat again:
WARNING: CPU: 1 PID: 12512 at net/mptcp/protocol.c:761 mptcp_reset_timer+0x12a/0x160 net/mptcp/protocol.c:761
Modules linked in:
CPU: 1 PID: 12512 Comm: kworker/1:6 Not tainted 5.10.0-rc6 #52
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:mptcp_reset_timer+0x12a/0x160 net/mptcp/protocol.c:761
Code: e8 4b 0c ad ff e8 56 21 88 fe 48 b8 00 00 00 00 00 fc ff df 48 c7 04 03 00 00 00 00 48 83 c4 40 5b 5d 41 5c c3 e8 36 21 88 fe <0f> 0b 41 bc c8 00 00 00 eb 98 e8 e7 b1 af fe e9 30 ff ff ff 48 c7
RSP: 0018:ffffc900018c7c68 EFLAGS: 00010293
RAX: ffff888108cb1c80 RBX: 1ffff92000318f8d RCX: ffffffff82ad0307
RDX: 0000000000000000 RSI: ffffffff82ad036a RDI: 0000000000000007
RBP: ffff888113e2d000 R08: ffff888108cb1c80 R09: ffffed10227c5ab7
R10: ffff888113e2d5b7 R11: ffffed10227c5ab6 R12: 0000000000000000
R13: ffff88801f100000 R14: ffff888113e2d5b0 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff88811b500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd76a874ef8 CR3: 000000001689c005 CR4: 0000000000170ee0
Call Trace:
mptcp_worker+0xaa4/0x1560 net/mptcp/protocol.c:2334
process_one_work+0x8d3/0x1200 kernel/workqueue.c:2272
worker_thread+0x9c/0x1090 kernel/workqueue.c:2418
kthread+0x303/0x410 kernel/kthread.c:292
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:296
The mptcp_worker tries to update the MPTCP retransmission timer
even if such timer is not currently scheduled.
The mptcp_rtx_head() return value is bogus: we can have enqueued
data not yet transmitted. The above may additionally cause spurious,
unneeded MPTCP-level retransmissions.
Fix the issue adding an explicit clearing of the rtx queue before
trying to retransmit and checking for unacked data.
Additionally drop an unneeded timer stop call and the unused
mptcp_rtx_tail() helper.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current mptcp_poll() implementation gives unexpected
results after shutdown(SEND_SHUTDOWN) and when the msk
status is TCP_CLOSE.
Set the correct mask.
Fixes: 8edf08649e ("mptcp: rework poll+nospace handling")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently all errors received on msk subflows are ignored.
We need to catch at least the errors on connect() and
on fallback sockets.
Use a custom sk_error_report callback at subflow level,
and do the real action under the msk socket lock - via
the usual sock_owned_by_user()/release_callback() schema.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Explicitly define reserved field and require it and any subsequent
fields to be zero-valued for now. Additionally, limit the valid CMSG
flags that tcp_zerocopy_receive accepts.
Fixes: 7eeba1706e ("tcp: Add receive timestamp support for receive zerocopy.")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Suggested-by: Leon Romanovsky <leon@kernel.org>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_ifsioc_locked() is called with only RCU read lock, so when
there is a parallel writer changing the mac address, it could
get a partially updated mac address, as shown below:
Thread 1 Thread 2
// eth_commit_mac_addr_change()
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
// dev_ifsioc_locked()
memcpy(ifr->ifr_hwaddr.sa_data,
dev->dev_addr,...);
Close this race condition by guarding them with a RW semaphore,
like netdev_get_name(). We can not use seqlock here as it does not
allow blocking. The writers already take RTNL anyway, so this does
not affect the slow path. To avoid bothering existing
dev_set_mac_address() callers in drivers, introduce a new wrapper
just for user-facing callers on ioctl and rtnetlink paths.
Note, bonding also changes slave mac addresses but that requires
a separate patch due to the complexity of bonding code.
Fixes: 3710becf8a ("net: RCU locking for simple ioctl()")
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This needs a new helper that:
- can work in a sleepable context (using sock_gen_cookie)
- takes a struct sock pointer and checks that it's not NULL
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-2-revest@chromium.org
el/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2021-02-11
Here's the main bluetooth-next pull request for 5.12:
- Add support for advertising monitor offliading using Microsoft
vendor extensions
- Add firmware download support for MediaTek MT7921U USB devices
- Suspend-related fixes for Qualcomm devices
- Add support for Intel GarfieldPeak controller
- Various other smaller fixes & cleanups
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The function fib6_walk_continue() cannot return a positive value when
called from register_fib_notifier(), but ignoring causes static analyzer to
generate warnings in users of register_fib_notifier() that try to convert
returned error code to pointer with ERR_PTR(). Handle such case by
explicitly checking for positive error values and converting them to
-EINVAL in fib6_tables_dump().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the fact that ic_dev->dev is kept open in ic_close_dev, I had
thought that ic_dev will not be freed either. But that is not the case,
but instead "everybody dies" when ipconfig cleans up, and just the
net_device behind ic_dev->dev remains allocated but not ic_dev itself.
This is a problem because in ic_close_devs, for every net device that
we're about to close, we compare it against the list of lower interfaces
of ic_dev, to figure out whether we should close it or not. But since
ic_dev itself is subject to freeing, this means that at some point in
the middle of the list of ipconfig interfaces, ic_dev will have been
freed, and we would be still attempting to iterate through its list of
lower interfaces while checking whether to bring down the remaining
ipconfig interfaces.
There are multiple ways to avoid the use-after-free: we could delay
freeing ic_dev until the very end (outside the while loop). Or an even
simpler one: we can observe that we don't need ic_dev when iterating
through its lowers, only ic_dev->dev, structure which isn't ever freed.
So, by keeping ic_dev->dev in a variable assigned prior to freeing
ic_dev, we can avoid all use-after-free issues.
Fixes: 46acf7bdbc ("Revert "net: ipv4: handle DSA enabled master network devices"")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is simpler to make net->net_cookie a plain u64
written once in setup_net() instead of looping
and using atomic64 helpers.
Lorenz Bauer wants to add SO_NETNS_COOKIE socket option
and this patch would makes his patch series simpler.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add offloading for HSR/PRP (IEC 62439-3) tag insertion, tag removal
forwarding and duplication supported by the xrs7000 series switches.
Only HSR v1 and PRP v1 are supported by the xrs7000 series switches (HSR
v0 is not).
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion
tag removal, duplicate generation and forwarding on DSA switches.
Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls
to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch.
The DSA switch driver should then set netdev feature flags for the
HSR/PRP operation that it offloads.
NETIF_F_HW_HSR_TAG_INS
NETIF_F_HW_HSR_TAG_RM
NETIF_F_HW_HSR_FWD
NETIF_F_HW_HSR_DUP
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion
tag removal, duplicate generation and forwarding.
For HSR, insertion involves the switch adding a 6 byte HSR header after
the 14 byte Ethernet header. For PRP it adds a 6 byte trailer.
Tag removal involves automatically stripping the HSR/PRP header/trailer
in the switch. This is possible when the switch also performs auto
deduplication using the HSR/PRP header/trailer (making it no longer
required).
Forwarding involves automatically forwarding between redundant ports in
an HSR. This is crucial because delay is accumulated as a frame passes
through each node in the ring.
Duplication involves the switch automatically sending a single frame
from the CPU port to both redundant ports. This is required because the
inserted HSR/PRP header/trailer must contain the same sequence number
on the frames sent out both redundant ports.
Export is_hsr_master so DSA can tell them apart from other devices in
dsa_slave_changeupper.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For a switch to offload insertion of HSR/PRP tags, frames must not be
sent to the CPU facing switch port with a tag. Generate supervision frames
(eth type ETH_P_PRP) without HSR v1 (ETH_P_HSR)/PRP tag and rely on
create_tagged_frame which inserts it later. This will allow skipping the
tag insertion for all outgoing frames in the future which is required for
HSR v1/PRP tag insertions to be offloaded.
HSR v0 supervision frames always contain tag information so insertion of
the tag can't be offloaded. IEC 62439-3 Ed.2.0 (HSR v1) specifically
notes that this was changed since v0 to allow offloading.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even when implementing RFC 6056 3.3.4 (Algorithm 4: Double-Hash
Port Selection Algorithm), a patient attacker could still be able
to collect enough state from an otherwise idle host.
Idea of this patch is to inject some noise, in the
cases __inet_hash_connect() found a candidate in the first
attempt.
This noise should not significantly reduce the collision
avoidance, and should be zero if connection table
is already well used.
Note that this is not implementing RFC 6056 3.3.5
because we think Algorithm 5 could hurt typical
workloads.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Dworken <ddworken@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 6056 (Recommendations for Transport-Protocol Port Randomization)
provides good summary of why source selection needs extra care.
David Dworken reminded us that linux implements Algorithm 3
as described in RFC 6056 3.3.3
Quoting David :
In the context of the web, this creates an interesting info leak where
websites can count how many TCP connections a user's computer is
establishing over time. For example, this allows a website to count
exactly how many subresources a third party website loaded.
This also allows:
- Distinguishing between different users behind a VPN based on
distinct source port ranges.
- Tracking users over time across multiple networks.
- Covert communication channels between different browsers/browser
profiles running on the same computer
- Tracking what applications are running on a computer based on
the pattern of how fast source ports are getting incremented.
Section 3.3.4 describes an enhancement, that reduces
attackers ability to use the basic information currently
stored into the shared 'u32 hint'.
This change also decreases collision rate when
multiple applications need to connect() to
different destinations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: David Dworken <ddworken@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The changes to make rxrpc create the udp socket missed a bit to add the
Kconfig dependency on the udp tunnel code to do this.
Fix this by adding making AF_RXRPC select NET_UDP_TUNNEL.
Fixes: 1a9b86c9fd ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
cc: alaa@dev.mellanox.co.il
cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reject the unsupported and invalid ct_state flags of cls flower rules.
Fixes: e0ace68af2 ("net/sched: cls_flower: Add matching on conntrack info")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Another pile of networing fixes:
1) ath9k build error fix from Arnd Bergmann
2) dma memory leak fix in mediatec driver from Lorenzo Bianconi.
3) bpf int3 kprobe fix from Alexei Starovoitov.
4) bpf stackmap integer overflow fix from Bui Quang Minh.
5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from
Christoph Schemmel.
6) Don't update deleted entry in xt_recent netfilter module, from
Jazsef Kadlecsik.
7) Use after free in nftables, fix from Pablo Neira Ayuso.
8) Header checksum fix in flowtable from Sven Auhagen.
9) Validate user controlled length in qrtr code, from Sabyrzhan
Tasbolatov.
10) Fix race in xen/netback, from Juergen Gross,
11) New device ID in cxgb4, from Raju Rangoju.
12) Fix ring locking in rxrpc release call, from David Howells.
13) Don't return LAPB error codes from x25_open(), from Xie He.
14) Missing error returns in gsi_channel_setup() from Alex Elder.
15) Get skb_copy_and_csum_datagram working properly with odd segment
sizes, from Willem de Bruijn.
16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean.
17) Do teardown on probe failure in DSA, from Vladimir Oltean.
18) Fix compilation failures of txtimestamp selftest, from Vadim
Fedorenko.
19) Limit rx per-napi gro queue size to fix latency regression, from
Eric Dumazet.
20) dpaa_eth xdp fixes from Camelia Groza.
21) Missing txq mode update when switching CBS off, in stmmac driver,
from Mohammad Athari Bin Ismail.
22) Failover pending logic fix in ibmvnic driver, from Sukadev
Bhattiprolu.
23) Null deref fix in vmw_vsock, from Norbert Slusarek.
24) Missing verdict update in xdp paths of ena driver, from Shay
Agroskin.
25) seq_file iteration fix in sctp from Neil Brown.
26) bpf 32-bit src register truncation fix on div/mod, from Daniel
Borkmann.
27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann.
28) Fix locking in vsock_shutdown(), from Stefano Garzarella.
29) Various missing index bound checks in hns3 driver, from Yufeng Mo.
30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from
Vladimir Oltean.
31) Don't mix up stp and mrp port states in bridge layer, from Horatiu
Vultur.
32) Fix locking during netif_tx_disable(), from Edwin Peer"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
bpf: Fix 32 bit src register truncation on div/mod
bpf: Fix verifier jmp32 pruning decision logic
bpf: Fix verifier jsgt branch analysis on max bound
vsock: fix locking in vsock_shutdown()
net: hns3: add a check for index in hclge_get_rss_key()
net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()
net: hns3: add a check for queue_id in hclge_reset_vf_queue()
net: dsa: felix: implement port flushing on .phylink_mac_link_down
switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT
bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state
net: watchdog: hold device global xmit lock during tx disable
netfilter: nftables: relax check for stateful expressions in set definition
netfilter: conntrack: skip identical origin tuple in same zone only
vsock/virtio: update credit only if socket is not closed
net: fix iteration for sctp transport seq_files
net: ena: Update XDP verdict upon failure
net/vmw_vsock: improve locking in vsock_connect_timeout()
net/vmw_vsock: fix NULL pointer dereference
ibmvnic: Clear failover_pending if unable to schedule
net: stmmac: set TxQ mode back to DCB after disabling CBS
...
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) nf_conntrack_tuple_taken() needs to recheck zone for
NAT clash resolution, from Florian Westphal.
2) Restore support for stateful expressions when set definition
specifies no stateful expressions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In vsock_shutdown() we touched some socket fields without holding the
socket lock, such as 'state' and 'sk_flags'.
Also, after the introduction of multi-transport, we are accessing
'vsk->transport' in vsock_send_shutdown() without holding the lock
and this call can be made while the connection is in progress, so
the transport can change in the meantime.
To avoid issues, we hold the socket lock when we enter in
vsock_shutdown() and release it when we leave.
Among the transports that implement the 'shutdown' callback, only
hyperv_transport acquired the lock. Since the caller now holds it,
we no longer take it.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new sysfs attribute to the network device class.
Said attribute provides a per-device control to enable/disable the
threaded mode for all the napi instances of the given network device,
without the need for a device up/down.
User sets it to 1 or 0 to enable or disable threaded mode.
Note: when switching between threaded and the current softirq based mode
for a napi instance, it will not immediately take effect if the napi is
currently being polled. The mode switch will happen for the next time
napi_schedule() is called.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Co-developed-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows running each napi poll loop inside its own
kernel thread.
The kthread is created during netif_napi_add() if dev->threaded
is set. And threaded mode is enabled in napi_enable(). We will
provide a way to set dev->threaded and enable threaded mode
without a device up/down in the following patch.
Once that threaded mode is enabled and the kthread is
started, napi_schedule() will wake-up such thread instead
of scheduling the softirq.
The threaded poll loop behaves quite likely the net_rx_action,
but it does not have to manipulate local irqs and uses
an explicit scheduling point based on netdev_budget.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit introduces a new function __napi_poll() which does the main
logic of the existing napi_poll() function, and will be called by other
functions in later commits.
This idea and implementation is done by Felix Fietkau <nbd@nbd.name> and
is proposed as part of the patch to move napi work to work_queue
context.
This commit by itself is a code restructure.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-02-09
1) Support TSO on xfrm interfaces.
From Eyal Birger.
2) Variable calculation simplifications in esp4/esp6.
From Jiapeng Chong / Jiapeng Zhong.
3) Fix a return code in xfrm_do_migrate.
From Zheng Yongjun.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the value '2' to 'fib_notify_on_flag_change' to allow sending
notifications only for failed route installation.
Separate value is added for such notifications because there are less of
them, so they do not impact performance and some users will find them more
important.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel, but not
necessarily in hardware.
The asynchronous nature of route installation in hardware can lead to a
routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.
To avoid such cases, previous patch set added the ability to emit
RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed, this behavior is controlled by sysctl.
With the above mentioned behavior, it is possible to know from user-space
if the route was offloaded, but if the offload fails there is no indication
to user-space. Following a failure, a routing daemon will wait indefinitely
for a notification that will never come.
This patch adds an "offload_failed" indication to IPv6 routes, so that
users will have better visibility into the offload process.
'struct fib6_info' is extended with new field that indicates if route
offload failed. Note that the new field is added using unused bit and
therefore there is no need to increase struct size.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the value '2' to 'fib_notify_on_flag_change' to allow sending
notifications only for failed route installation.
Separate value is added for such notifications because there are less of
them, so they do not impact performance and some users will find them more
important.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel, but not
necessarily in hardware.
The asynchronous nature of route installation in hardware can lead to a
routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.
To avoid such cases, previous patch set added the ability to emit
RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed, this behavior is controlled by sysctl.
With the above mentioned behavior, it is possible to know from user-space
if the route was offloaded, but if the offload fails there is no indication
to user-space. Following a failure, a routing daemon will wait indefinitely
for a notification that will never come.
This patch adds an "offload_failed" indication to IPv4 routes, so that
users will have better visibility into the offload process.
'struct fib_alias', and 'struct fib_rt_info' are extended with new field
that indicates if route offload failed. Note that the new field is added
using unused bit and therefore there is no need to increase structs size.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function br_mrp_port_switchdev_set_state was called both with MRP
port state and STP port state, which is an issue because they don't
match exactly.
Therefore, update the function to be used only with STP port state and
use the id SWITCHDEV_ATTR_ID_PORT_STP_STATE.
The choice of using STP over MRP is that the drivers already implement
SWITCHDEV_ATTR_ID_PORT_STP_STATE and already in SW we update the port
STP state.
Fixes: 9a9f26e8f7 ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes: fadd409136 ("bridge: switchdev: mrp: Implement MRP API for switchdev")
Fixes: 2f1a11ae11 ("bridge: mrp: Add MRP interface.")
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Restore the original behaviour where users are allowed to add an element
with any stateful expression if the set definition specifies no stateful
expressions. Make sure upper maximum number of stateful expressions of
NFT_SET_EXPR_MAX is not reached.
Fixes: 8cfd9b0f85 ("netfilter: nftables: generalize set expressions support")
Fixes: 48b0ae046e ("netfilter: nftables: netlink support for several set element expressions")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In rxrpc_open_socket(), now it's using sock_create_kern() and
kernel_bind() to create a udp tunnel socket, and other kernel
APIs to set up it. These code can be replaced with udp tunnel
APIs udp_sock_create() and setup_udp_tunnel_sock(), and it'll
simplify rxrpc_open_socket().
Note that with this patch, the udp tunnel socket will always
bind to a random port if transport is not provided by users,
which is suggested by David Howells, thanks!
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to access the suboordinate dev for a device we should be holding
the rtnl_lock when outside of the transmit path. The existing code was not
doing that for the sysfs dump function and as a result we were open to a
possible race.
To resolve that take the rtnl lock prior to accessing the sb_dev field of
the Tx queue and release it after we have retrieved the tc for the queue.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The origin skip check needs to re-test the zone. Else, we might skip
a colliding tuple in the reply direction.
This only occurs when using 'directional zones' where origin tuples
reside in different zones but the reply tuples share the same zone.
This causes the new conntrack entry to be dropped at confirmation time
because NAT clash resolution was elided.
Fixes: 4e35c1cb94 ("netfilter: nf_nat: skip nat clash resolution for same-origin entries")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the socket is closed or is being released, some resources used by
virtio_transport_space_update() such as 'vsk->trans' may be released.
To avoid a use after free bug we should only update the available credit
when we are sure the socket is still open and we have the lock held.
Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210208144454.84438-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The set of required attributes for a given SRv6 behavior is identified
using a bitmap stored in an unsigned long, since the initial design of SRv6
networking in Linux. Recently the same approach has been used for
identifying the optional attributes.
However, the number of attributes supported by SRv6 behaviors depends on
the size of the unsigned long type which changes with the architecture.
Indeed, on a 64-bit architecture, an SRv6 behavior can support up to 64
attributes while on a 32-bit architecture it can support at most 32
attributes.
To fool-proof the processing of SRv6 behaviors we verify, at compile time,
that the set of all supported SRv6 attributes can be encoded into a bitmap
stored in an unsigned long. Otherwise, kernel build fails forcing
developers to reconsider adding a new attribute or extend the total
number of supported attributes by the SRv6 behaviors.
Moreover, we replace all patterns (1 << i) with the macro SEG6_F_ATTR(i) in
order to address potential overflow issues caused by 32-bit signed
arithmetic.
Thanks to Colin Ian King for catching the overflow problem, providing a
solution and inspiring this patch.
Thanks to Jakub Kicinski for his useful suggestions during the design of
this patch.
v2:
- remove the SEG6_LOCAL_MAX_SUPP which is not strictly needed: it can
be derived from the unsigned long type. Thanks to David Ahern for
pointing it out.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210206170934.5982-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of Feb 2nd (batadv-next-pullrequest-20210202) and includes the
following patches:
- Bump version strings, by Simon Wunderlich (added commit log)
- Drop publication years from copyright info, by Sven Eckelmann
(replaced the previous patch which updated copyright years, as per
our discussion)
- Avoid sizeof on flexible structure, by Sven Eckelmann (unchanged)
- Fix names for kernel-doc blocks, by Sven Eckelmann (unchanged)
-----BEGIN PGP SIGNATURE-----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=fX7f
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20210208' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset is an updated version of the pull request
of Feb 2nd (batadv-next-pullrequest-20210202) and includes the
following patches:
- Bump version strings, by Simon Wunderlich (added commit log)
- Drop publication years from copyright info, by Sven Eckelmann
(replaced the previous patch which updated copyright years, as per
our discussion)
- Avoid sizeof on flexible structure, by Sven Eckelmann (unchanged)
- Fix names for kernel-doc blocks, by Sven Eckelmann (unchanged)
* tag 'batadv-next-pullrequest-20210208' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix names for kernel-doc blocks
batman-adv: Avoid sizeof on flexible structure
batman-adv: Drop publication years from copyright info
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20210208165938.13262-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sctp transport seq_file iterators take a reference to the transport
in the ->start and ->next functions and releases the reference in the
->show function. The preferred handling for such resources is to
release them in the subsequent ->next or ->stop function call.
Since Commit 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration
code and interface") there is no guarantee that ->show will be called
after ->next, so this function can now leak references.
So move the sctp_transport_put() call to ->next and ->stop.
Fixes: 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration code and interface")
Reported-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>