Get rid of a lot of divisions and modulo operations
Reduces code size and improves performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sparse started warning on this function because we can potentially
return an uninitialized value. The reason is that if the caller
passes a min_bw value that is higher then the last value in bws[], we
will not go into the loop and reg_rule will remain initialized. This
cannot happen because the only caller of this function uses either 1
or 20 in min_bw, but the function will be more robust if we
pre-initialize the value.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210204154439.6c884ea7281c.I257278d03b0c1ae0aa6631672cfa48f1a95d5996@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The multiplication of the u32 variables tx_time and estimated_retx is
performed using a 32 bit multiplication and the result is stored in
a u64 result. This has a potential u32 overflow issue, so avoid this
by casting tx_time to a u64 to force a 64 bit multiply.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 050ac52cbe ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210205175352.208841-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch unifies sending control port frames
over nl80211 and AF_PACKET sockets a little more.
Before this patch, EAPOL frames got QoS prioritization
only when using AF_PACKET sockets.
__ieee80211_select_queue only selects a QoS-enabled queue
for control port frames, when the control port protocol
is set correctly on the skb. For the AF_PACKET path this
works, but the nl80211 path used ETH_P_802_3.
Another check for injected frames in wme.c then prevented
the QoS TID to be copied in the frame.
In order to fix this, get rid of the frame injection marking
for nl80211 ctrl port and set the correct ethernet protocol.
Please note:
An erlier version of this path tried to prevent
frame aggregation for control port frames in order to speed up
the initial connection setup a little. This seemed to cause
issues on my older Intel dvm-based hardware, and was therefore
removed again. Future commits which try to reintroduce this
have to check carefully how hw behaves with aggregated and
non-aggregated traffic for the same TID.
My NIC: Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20210206115112.567881-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The ieee80211 class registers a callback which actually does nothing.
Given that the callback is optional, and all its accesses are protected
by a NULL check, remove it entirely.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Link: https://lore.kernel.org/r/20210208113356.4105-1-mcroce@linux.microsoft.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Compile-in the socket RX queue mapping field and logic when TLS_DEVICE
is enabled. This allows device drivers to pick the recorded socket's
RX queue and use it for streams distribution.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a new config SOCK_RX_QUEUE_MAPPING to compile-in the socket
RX queue field and logic, instead of the XPS config.
This breaks dependency in XPS, and allows selecting it from non-XPS
use cases, as we do in the next patch.
In addition, use the new flag to wrap the logic in sk_rx_queue_get()
and protect access to the sk_rx_queue_mapping field, while keeping
the function exposed unconditionally, just like sk_rx_queue_set()
and sk_rx_queue_clear().
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we do not schedule the MPTCP retransmission
timer after pushing the data when such action happens
in the subflow context.
This may cause hang-up on active-backup scenarios, or
even when only single subflow msks are involved, if we lost
some peer's ack.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move mptcp_cleanup_rbuf() related checks inside the mentioned
helper and extend them to mirror TCP checks more closely.
Additionally drop the 'rmem_pending' hack, since commit 879526030c
("mptcp: protect the rx path with the msk socket spinlock") we
can use instead 'rmem_released'.
Fixes: ea4ca586b1 ("mptcp: refine MPTCP-level ack scheduling")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp subflow route_req() callback performs the subflow
req initialization after the route_req() check. If the latter
fails, mptcp-specific bits of the current request sockets
are left uninitialized.
The above causes bad things at req socket disposal time, when
the mptcp resources are cleared.
This change addresses the issue by splitting subflow_init_req()
into the actual initialization and the mptcp-specific checks.
The initialization is moved before any possibly failing check.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes: 7ea851d19b ("tcp: merge 'init_req' and 'route_req' functions")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzkaller was able to trigger the following splat again:
WARNING: CPU: 1 PID: 12512 at net/mptcp/protocol.c:761 mptcp_reset_timer+0x12a/0x160 net/mptcp/protocol.c:761
Modules linked in:
CPU: 1 PID: 12512 Comm: kworker/1:6 Not tainted 5.10.0-rc6 #52
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:mptcp_reset_timer+0x12a/0x160 net/mptcp/protocol.c:761
Code: e8 4b 0c ad ff e8 56 21 88 fe 48 b8 00 00 00 00 00 fc ff df 48 c7 04 03 00 00 00 00 48 83 c4 40 5b 5d 41 5c c3 e8 36 21 88 fe <0f> 0b 41 bc c8 00 00 00 eb 98 e8 e7 b1 af fe e9 30 ff ff ff 48 c7
RSP: 0018:ffffc900018c7c68 EFLAGS: 00010293
RAX: ffff888108cb1c80 RBX: 1ffff92000318f8d RCX: ffffffff82ad0307
RDX: 0000000000000000 RSI: ffffffff82ad036a RDI: 0000000000000007
RBP: ffff888113e2d000 R08: ffff888108cb1c80 R09: ffffed10227c5ab7
R10: ffff888113e2d5b7 R11: ffffed10227c5ab6 R12: 0000000000000000
R13: ffff88801f100000 R14: ffff888113e2d5b0 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff88811b500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd76a874ef8 CR3: 000000001689c005 CR4: 0000000000170ee0
Call Trace:
mptcp_worker+0xaa4/0x1560 net/mptcp/protocol.c:2334
process_one_work+0x8d3/0x1200 kernel/workqueue.c:2272
worker_thread+0x9c/0x1090 kernel/workqueue.c:2418
kthread+0x303/0x410 kernel/kthread.c:292
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:296
The mptcp_worker tries to update the MPTCP retransmission timer
even if such timer is not currently scheduled.
The mptcp_rtx_head() return value is bogus: we can have enqueued
data not yet transmitted. The above may additionally cause spurious,
unneeded MPTCP-level retransmissions.
Fix the issue adding an explicit clearing of the rtx queue before
trying to retransmit and checking for unacked data.
Additionally drop an unneeded timer stop call and the unused
mptcp_rtx_tail() helper.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current mptcp_poll() implementation gives unexpected
results after shutdown(SEND_SHUTDOWN) and when the msk
status is TCP_CLOSE.
Set the correct mask.
Fixes: 8edf08649e ("mptcp: rework poll+nospace handling")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently all errors received on msk subflows are ignored.
We need to catch at least the errors on connect() and
on fallback sockets.
Use a custom sk_error_report callback at subflow level,
and do the real action under the msk socket lock - via
the usual sock_owned_by_user()/release_callback() schema.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Explicitly define reserved field and require it and any subsequent
fields to be zero-valued for now. Additionally, limit the valid CMSG
flags that tcp_zerocopy_receive accepts.
Fixes: 7eeba1706e ("tcp: Add receive timestamp support for receive zerocopy.")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Suggested-by: Leon Romanovsky <leon@kernel.org>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_ifsioc_locked() is called with only RCU read lock, so when
there is a parallel writer changing the mac address, it could
get a partially updated mac address, as shown below:
Thread 1 Thread 2
// eth_commit_mac_addr_change()
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
// dev_ifsioc_locked()
memcpy(ifr->ifr_hwaddr.sa_data,
dev->dev_addr,...);
Close this race condition by guarding them with a RW semaphore,
like netdev_get_name(). We can not use seqlock here as it does not
allow blocking. The writers already take RTNL anyway, so this does
not affect the slow path. To avoid bothering existing
dev_set_mac_address() callers in drivers, introduce a new wrapper
just for user-facing callers on ioctl and rtnetlink paths.
Note, bonding also changes slave mac addresses but that requires
a separate patch due to the complexity of bonding code.
Fixes: 3710becf8a ("net: RCU locking for simple ioctl()")
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This needs a new helper that:
- can work in a sleepable context (using sock_gen_cookie)
- takes a struct sock pointer and checks that it's not NULL
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-2-revest@chromium.org
el/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2021-02-11
Here's the main bluetooth-next pull request for 5.12:
- Add support for advertising monitor offliading using Microsoft
vendor extensions
- Add firmware download support for MediaTek MT7921U USB devices
- Suspend-related fixes for Qualcomm devices
- Add support for Intel GarfieldPeak controller
- Various other smaller fixes & cleanups
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The function fib6_walk_continue() cannot return a positive value when
called from register_fib_notifier(), but ignoring causes static analyzer to
generate warnings in users of register_fib_notifier() that try to convert
returned error code to pointer with ERR_PTR(). Handle such case by
explicitly checking for positive error values and converting them to
-EINVAL in fib6_tables_dump().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the fact that ic_dev->dev is kept open in ic_close_dev, I had
thought that ic_dev will not be freed either. But that is not the case,
but instead "everybody dies" when ipconfig cleans up, and just the
net_device behind ic_dev->dev remains allocated but not ic_dev itself.
This is a problem because in ic_close_devs, for every net device that
we're about to close, we compare it against the list of lower interfaces
of ic_dev, to figure out whether we should close it or not. But since
ic_dev itself is subject to freeing, this means that at some point in
the middle of the list of ipconfig interfaces, ic_dev will have been
freed, and we would be still attempting to iterate through its list of
lower interfaces while checking whether to bring down the remaining
ipconfig interfaces.
There are multiple ways to avoid the use-after-free: we could delay
freeing ic_dev until the very end (outside the while loop). Or an even
simpler one: we can observe that we don't need ic_dev when iterating
through its lowers, only ic_dev->dev, structure which isn't ever freed.
So, by keeping ic_dev->dev in a variable assigned prior to freeing
ic_dev, we can avoid all use-after-free issues.
Fixes: 46acf7bdbc ("Revert "net: ipv4: handle DSA enabled master network devices"")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is simpler to make net->net_cookie a plain u64
written once in setup_net() instead of looping
and using atomic64 helpers.
Lorenz Bauer wants to add SO_NETNS_COOKIE socket option
and this patch would makes his patch series simpler.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add offloading for HSR/PRP (IEC 62439-3) tag insertion, tag removal
forwarding and duplication supported by the xrs7000 series switches.
Only HSR v1 and PRP v1 are supported by the xrs7000 series switches (HSR
v0 is not).
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion
tag removal, duplicate generation and forwarding on DSA switches.
Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls
to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch.
The DSA switch driver should then set netdev feature flags for the
HSR/PRP operation that it offloads.
NETIF_F_HW_HSR_TAG_INS
NETIF_F_HW_HSR_TAG_RM
NETIF_F_HW_HSR_FWD
NETIF_F_HW_HSR_DUP
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion
tag removal, duplicate generation and forwarding.
For HSR, insertion involves the switch adding a 6 byte HSR header after
the 14 byte Ethernet header. For PRP it adds a 6 byte trailer.
Tag removal involves automatically stripping the HSR/PRP header/trailer
in the switch. This is possible when the switch also performs auto
deduplication using the HSR/PRP header/trailer (making it no longer
required).
Forwarding involves automatically forwarding between redundant ports in
an HSR. This is crucial because delay is accumulated as a frame passes
through each node in the ring.
Duplication involves the switch automatically sending a single frame
from the CPU port to both redundant ports. This is required because the
inserted HSR/PRP header/trailer must contain the same sequence number
on the frames sent out both redundant ports.
Export is_hsr_master so DSA can tell them apart from other devices in
dsa_slave_changeupper.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For a switch to offload insertion of HSR/PRP tags, frames must not be
sent to the CPU facing switch port with a tag. Generate supervision frames
(eth type ETH_P_PRP) without HSR v1 (ETH_P_HSR)/PRP tag and rely on
create_tagged_frame which inserts it later. This will allow skipping the
tag insertion for all outgoing frames in the future which is required for
HSR v1/PRP tag insertions to be offloaded.
HSR v0 supervision frames always contain tag information so insertion of
the tag can't be offloaded. IEC 62439-3 Ed.2.0 (HSR v1) specifically
notes that this was changed since v0 to allow offloading.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even when implementing RFC 6056 3.3.4 (Algorithm 4: Double-Hash
Port Selection Algorithm), a patient attacker could still be able
to collect enough state from an otherwise idle host.
Idea of this patch is to inject some noise, in the
cases __inet_hash_connect() found a candidate in the first
attempt.
This noise should not significantly reduce the collision
avoidance, and should be zero if connection table
is already well used.
Note that this is not implementing RFC 6056 3.3.5
because we think Algorithm 5 could hurt typical
workloads.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Dworken <ddworken@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 6056 (Recommendations for Transport-Protocol Port Randomization)
provides good summary of why source selection needs extra care.
David Dworken reminded us that linux implements Algorithm 3
as described in RFC 6056 3.3.3
Quoting David :
In the context of the web, this creates an interesting info leak where
websites can count how many TCP connections a user's computer is
establishing over time. For example, this allows a website to count
exactly how many subresources a third party website loaded.
This also allows:
- Distinguishing between different users behind a VPN based on
distinct source port ranges.
- Tracking users over time across multiple networks.
- Covert communication channels between different browsers/browser
profiles running on the same computer
- Tracking what applications are running on a computer based on
the pattern of how fast source ports are getting incremented.
Section 3.3.4 describes an enhancement, that reduces
attackers ability to use the basic information currently
stored into the shared 'u32 hint'.
This change also decreases collision rate when
multiple applications need to connect() to
different destinations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: David Dworken <ddworken@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The changes to make rxrpc create the udp socket missed a bit to add the
Kconfig dependency on the udp tunnel code to do this.
Fix this by adding making AF_RXRPC select NET_UDP_TUNNEL.
Fixes: 1a9b86c9fd ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
cc: alaa@dev.mellanox.co.il
cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reject the unsupported and invalid ct_state flags of cls flower rules.
Fixes: e0ace68af2 ("net/sched: cls_flower: Add matching on conntrack info")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Another pile of networing fixes:
1) ath9k build error fix from Arnd Bergmann
2) dma memory leak fix in mediatec driver from Lorenzo Bianconi.
3) bpf int3 kprobe fix from Alexei Starovoitov.
4) bpf stackmap integer overflow fix from Bui Quang Minh.
5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from
Christoph Schemmel.
6) Don't update deleted entry in xt_recent netfilter module, from
Jazsef Kadlecsik.
7) Use after free in nftables, fix from Pablo Neira Ayuso.
8) Header checksum fix in flowtable from Sven Auhagen.
9) Validate user controlled length in qrtr code, from Sabyrzhan
Tasbolatov.
10) Fix race in xen/netback, from Juergen Gross,
11) New device ID in cxgb4, from Raju Rangoju.
12) Fix ring locking in rxrpc release call, from David Howells.
13) Don't return LAPB error codes from x25_open(), from Xie He.
14) Missing error returns in gsi_channel_setup() from Alex Elder.
15) Get skb_copy_and_csum_datagram working properly with odd segment
sizes, from Willem de Bruijn.
16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean.
17) Do teardown on probe failure in DSA, from Vladimir Oltean.
18) Fix compilation failures of txtimestamp selftest, from Vadim
Fedorenko.
19) Limit rx per-napi gro queue size to fix latency regression, from
Eric Dumazet.
20) dpaa_eth xdp fixes from Camelia Groza.
21) Missing txq mode update when switching CBS off, in stmmac driver,
from Mohammad Athari Bin Ismail.
22) Failover pending logic fix in ibmvnic driver, from Sukadev
Bhattiprolu.
23) Null deref fix in vmw_vsock, from Norbert Slusarek.
24) Missing verdict update in xdp paths of ena driver, from Shay
Agroskin.
25) seq_file iteration fix in sctp from Neil Brown.
26) bpf 32-bit src register truncation fix on div/mod, from Daniel
Borkmann.
27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann.
28) Fix locking in vsock_shutdown(), from Stefano Garzarella.
29) Various missing index bound checks in hns3 driver, from Yufeng Mo.
30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from
Vladimir Oltean.
31) Don't mix up stp and mrp port states in bridge layer, from Horatiu
Vultur.
32) Fix locking during netif_tx_disable(), from Edwin Peer"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
bpf: Fix 32 bit src register truncation on div/mod
bpf: Fix verifier jmp32 pruning decision logic
bpf: Fix verifier jsgt branch analysis on max bound
vsock: fix locking in vsock_shutdown()
net: hns3: add a check for index in hclge_get_rss_key()
net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()
net: hns3: add a check for queue_id in hclge_reset_vf_queue()
net: dsa: felix: implement port flushing on .phylink_mac_link_down
switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT
bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state
net: watchdog: hold device global xmit lock during tx disable
netfilter: nftables: relax check for stateful expressions in set definition
netfilter: conntrack: skip identical origin tuple in same zone only
vsock/virtio: update credit only if socket is not closed
net: fix iteration for sctp transport seq_files
net: ena: Update XDP verdict upon failure
net/vmw_vsock: improve locking in vsock_connect_timeout()
net/vmw_vsock: fix NULL pointer dereference
ibmvnic: Clear failover_pending if unable to schedule
net: stmmac: set TxQ mode back to DCB after disabling CBS
...
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) nf_conntrack_tuple_taken() needs to recheck zone for
NAT clash resolution, from Florian Westphal.
2) Restore support for stateful expressions when set definition
specifies no stateful expressions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In vsock_shutdown() we touched some socket fields without holding the
socket lock, such as 'state' and 'sk_flags'.
Also, after the introduction of multi-transport, we are accessing
'vsk->transport' in vsock_send_shutdown() without holding the lock
and this call can be made while the connection is in progress, so
the transport can change in the meantime.
To avoid issues, we hold the socket lock when we enter in
vsock_shutdown() and release it when we leave.
Among the transports that implement the 'shutdown' callback, only
hyperv_transport acquired the lock. Since the caller now holds it,
we no longer take it.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new sysfs attribute to the network device class.
Said attribute provides a per-device control to enable/disable the
threaded mode for all the napi instances of the given network device,
without the need for a device up/down.
User sets it to 1 or 0 to enable or disable threaded mode.
Note: when switching between threaded and the current softirq based mode
for a napi instance, it will not immediately take effect if the napi is
currently being polled. The mode switch will happen for the next time
napi_schedule() is called.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Co-developed-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows running each napi poll loop inside its own
kernel thread.
The kthread is created during netif_napi_add() if dev->threaded
is set. And threaded mode is enabled in napi_enable(). We will
provide a way to set dev->threaded and enable threaded mode
without a device up/down in the following patch.
Once that threaded mode is enabled and the kthread is
started, napi_schedule() will wake-up such thread instead
of scheduling the softirq.
The threaded poll loop behaves quite likely the net_rx_action,
but it does not have to manipulate local irqs and uses
an explicit scheduling point based on netdev_budget.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit introduces a new function __napi_poll() which does the main
logic of the existing napi_poll() function, and will be called by other
functions in later commits.
This idea and implementation is done by Felix Fietkau <nbd@nbd.name> and
is proposed as part of the patch to move napi work to work_queue
context.
This commit by itself is a code restructure.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-02-09
1) Support TSO on xfrm interfaces.
From Eyal Birger.
2) Variable calculation simplifications in esp4/esp6.
From Jiapeng Chong / Jiapeng Zhong.
3) Fix a return code in xfrm_do_migrate.
From Zheng Yongjun.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the value '2' to 'fib_notify_on_flag_change' to allow sending
notifications only for failed route installation.
Separate value is added for such notifications because there are less of
them, so they do not impact performance and some users will find them more
important.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel, but not
necessarily in hardware.
The asynchronous nature of route installation in hardware can lead to a
routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.
To avoid such cases, previous patch set added the ability to emit
RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed, this behavior is controlled by sysctl.
With the above mentioned behavior, it is possible to know from user-space
if the route was offloaded, but if the offload fails there is no indication
to user-space. Following a failure, a routing daemon will wait indefinitely
for a notification that will never come.
This patch adds an "offload_failed" indication to IPv6 routes, so that
users will have better visibility into the offload process.
'struct fib6_info' is extended with new field that indicates if route
offload failed. Note that the new field is added using unused bit and
therefore there is no need to increase struct size.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the value '2' to 'fib_notify_on_flag_change' to allow sending
notifications only for failed route installation.
Separate value is added for such notifications because there are less of
them, so they do not impact performance and some users will find them more
important.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel, but not
necessarily in hardware.
The asynchronous nature of route installation in hardware can lead to a
routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.
To avoid such cases, previous patch set added the ability to emit
RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed, this behavior is controlled by sysctl.
With the above mentioned behavior, it is possible to know from user-space
if the route was offloaded, but if the offload fails there is no indication
to user-space. Following a failure, a routing daemon will wait indefinitely
for a notification that will never come.
This patch adds an "offload_failed" indication to IPv4 routes, so that
users will have better visibility into the offload process.
'struct fib_alias', and 'struct fib_rt_info' are extended with new field
that indicates if route offload failed. Note that the new field is added
using unused bit and therefore there is no need to increase structs size.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function br_mrp_port_switchdev_set_state was called both with MRP
port state and STP port state, which is an issue because they don't
match exactly.
Therefore, update the function to be used only with STP port state and
use the id SWITCHDEV_ATTR_ID_PORT_STP_STATE.
The choice of using STP over MRP is that the drivers already implement
SWITCHDEV_ATTR_ID_PORT_STP_STATE and already in SW we update the port
STP state.
Fixes: 9a9f26e8f7 ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes: fadd409136 ("bridge: switchdev: mrp: Implement MRP API for switchdev")
Fixes: 2f1a11ae11 ("bridge: mrp: Add MRP interface.")
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Restore the original behaviour where users are allowed to add an element
with any stateful expression if the set definition specifies no stateful
expressions. Make sure upper maximum number of stateful expressions of
NFT_SET_EXPR_MAX is not reached.
Fixes: 8cfd9b0f85 ("netfilter: nftables: generalize set expressions support")
Fixes: 48b0ae046e ("netfilter: nftables: netlink support for several set element expressions")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In rxrpc_open_socket(), now it's using sock_create_kern() and
kernel_bind() to create a udp tunnel socket, and other kernel
APIs to set up it. These code can be replaced with udp tunnel
APIs udp_sock_create() and setup_udp_tunnel_sock(), and it'll
simplify rxrpc_open_socket().
Note that with this patch, the udp tunnel socket will always
bind to a random port if transport is not provided by users,
which is suggested by David Howells, thanks!
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to access the suboordinate dev for a device we should be holding
the rtnl_lock when outside of the transmit path. The existing code was not
doing that for the sysfs dump function and as a result we were open to a
possible race.
To resolve that take the rtnl lock prior to accessing the sb_dev field of
the Tx queue and release it after we have retrieved the tc for the queue.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The origin skip check needs to re-test the zone. Else, we might skip
a colliding tuple in the reply direction.
This only occurs when using 'directional zones' where origin tuples
reside in different zones but the reply tuples share the same zone.
This causes the new conntrack entry to be dropped at confirmation time
because NAT clash resolution was elided.
Fixes: 4e35c1cb94 ("netfilter: nf_nat: skip nat clash resolution for same-origin entries")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the socket is closed or is being released, some resources used by
virtio_transport_space_update() such as 'vsk->trans' may be released.
To avoid a use after free bug we should only update the available credit
when we are sure the socket is still open and we have the lock held.
Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210208144454.84438-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The set of required attributes for a given SRv6 behavior is identified
using a bitmap stored in an unsigned long, since the initial design of SRv6
networking in Linux. Recently the same approach has been used for
identifying the optional attributes.
However, the number of attributes supported by SRv6 behaviors depends on
the size of the unsigned long type which changes with the architecture.
Indeed, on a 64-bit architecture, an SRv6 behavior can support up to 64
attributes while on a 32-bit architecture it can support at most 32
attributes.
To fool-proof the processing of SRv6 behaviors we verify, at compile time,
that the set of all supported SRv6 attributes can be encoded into a bitmap
stored in an unsigned long. Otherwise, kernel build fails forcing
developers to reconsider adding a new attribute or extend the total
number of supported attributes by the SRv6 behaviors.
Moreover, we replace all patterns (1 << i) with the macro SEG6_F_ATTR(i) in
order to address potential overflow issues caused by 32-bit signed
arithmetic.
Thanks to Colin Ian King for catching the overflow problem, providing a
solution and inspiring this patch.
Thanks to Jakub Kicinski for his useful suggestions during the design of
this patch.
v2:
- remove the SEG6_LOCAL_MAX_SUPP which is not strictly needed: it can
be derived from the unsigned long type. Thanks to David Ahern for
pointing it out.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210206170934.5982-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of Feb 2nd (batadv-next-pullrequest-20210202) and includes the
following patches:
- Bump version strings, by Simon Wunderlich (added commit log)
- Drop publication years from copyright info, by Sven Eckelmann
(replaced the previous patch which updated copyright years, as per
our discussion)
- Avoid sizeof on flexible structure, by Sven Eckelmann (unchanged)
- Fix names for kernel-doc blocks, by Sven Eckelmann (unchanged)
-----BEGIN PGP SIGNATURE-----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=fX7f
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20210208' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset is an updated version of the pull request
of Feb 2nd (batadv-next-pullrequest-20210202) and includes the
following patches:
- Bump version strings, by Simon Wunderlich (added commit log)
- Drop publication years from copyright info, by Sven Eckelmann
(replaced the previous patch which updated copyright years, as per
our discussion)
- Avoid sizeof on flexible structure, by Sven Eckelmann (unchanged)
- Fix names for kernel-doc blocks, by Sven Eckelmann (unchanged)
* tag 'batadv-next-pullrequest-20210208' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix names for kernel-doc blocks
batman-adv: Avoid sizeof on flexible structure
batman-adv: Drop publication years from copyright info
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20210208165938.13262-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sctp transport seq_file iterators take a reference to the transport
in the ->start and ->next functions and releases the reference in the
->show function. The preferred handling for such resources is to
release them in the subsequent ->next or ->stop function call.
Since Commit 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration
code and interface") there is no guarantee that ->show will be called
after ->next, so this function can now leak references.
So move the sctp_transport_put() call to ->next and ->stop.
Fixes: 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration code and interface")
Reported-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Remove indirection and use nf_ct_get() instead from nfnetlink_log
and nfnetlink_queue, from Florian Westphal.
2) Add weighted random twos choice least-connection scheduling for IPVS,
from Darby Payne.
3) Add a __hash placeholder in the flow tuple structure to identify
the field to be included in the rhashtable key hash calculation.
4) Add a new nft_parse_register_load() and nft_parse_register_store()
to consolidate register load and store in the core.
5) Statify nft_parse_register() since it has no more module clients.
6) Remove redundant assignment in nft_cmp, from Colin Ian King.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next:
netfilter: nftables: remove redundant assignment of variable err
netfilter: nftables: statify nft_parse_register()
netfilter: nftables: add nft_parse_register_store() and use it
netfilter: nftables: add nft_parse_register_load() and use it
netfilter: flowtable: add hash offset field to tuple
ipvs: add weighted random twos choice algorithm
netfilter: ctnetlink: remove get_ct indirection
====================
Link: https://lore.kernel.org/r/20210206015005.23037-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A possible locking issue in vsock_connect_timeout() was recognized by
Eric Dumazet which might cause a null pointer dereference in
vsock_transport_cancel_pkt(). This patch assures that
vsock_transport_cancel_pkt() will be called within the lock, so a race
condition won't occur which could result in vsk->transport to be set to NULL.
Fixes: 380feae0de ("vsock: cancel packets when failing to connect")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/trinity-f8e0937a-cf0e-4d80-a76e-d9a958ba3ef1-1612535522360@3c-app-gmx-bap12
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In vsock_stream_connect(), a thread will enter schedule_timeout().
While being scheduled out, another thread can enter vsock_stream_connect()
as well and set vsk->transport to NULL. In case a signal was sent, the
first thread can leave schedule_timeout() and vsock_transport_cancel_pkt()
will be called right after. Inside vsock_transport_cancel_pkt(), a null
dereference will happen on transport->cancel_pkt.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/trinity-c2d6cede-bfb1-44e2-85af-1fbc7f541715-1612535117028@3c-app-gmx-bap12
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "dev_has_header" function, recently added in
commit d549699048 ("net/packet: fix packet receive on L3 devices
without visible hard header"),
is more accurate as criteria for determining whether a device exposes
the LL header to upper layers, because in addition to dev->header_ops,
it also checks for dev->header_ops->create.
When transmitting an skb on a device, dev_hard_header can be called to
generate an LL header. dev_hard_header will only generate a header if
dev->header_ops->create is present.
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20210205224124.21345-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Given the following topology, and focusing only on Box A:
Box A
+----------------------------------+
| Board 1 br0 |
| +---------+ |
| / \ |
| | | |
| | bond0 |
| | +-----+ |
|192.168.1.1 | / \ |
| eno0 swp0 swp1 swp2 |
+---|--------|-------|-------|-----+
| | | |
+--------+ | |
Cable | |
Cable| |Cable
Cable | |
+--------+ | |
| | | |
+---|--------|-------|-------|-----+
| eno0 swp0 swp1 swp2 |
|192.168.1.2 | \ / |
| | +-----+ |
| | bond0 |
| | | |
| \ / |
| +---------+ |
| Board 2 br0 |
+----------------------------------+
Box B
The assisted_learning_on_cpu_port logic will see that swp0 is bridged
with a "foreign interface" (bond0) and will therefore install all
addresses learnt by the software bridge towards bond0 (including the
address of eno0 on Box B) as static addresses towards the CPU port.
But that's not what we want - bond0 is not really a "foreign interface"
but one we can offload including L2 forwarding from/towards it. So we
need to refine our logic for assisted learning such that, whenever we
see an address learnt on a non-DSA interface, we search through the tree
for any port that offloads that non-DSA interface.
Some confusion might arise as to why we search through the whole tree
instead of just the local switch returned by dsa_slave_dev_lower_find.
Or a different angle of the same confusion: why does
dsa_slave_dev_lower_find(br_dev) return a single dp that's under br_dev
instead of the whole list of bridged DSA ports?
To answer the second question, it should be enough to install the static
FDB entry on the CPU port of a single switch in the tree, because
dsa_port_fdb_add uses DSA_NOTIFIER_FDB_ADD which ensures that all other
switches in the tree get notified of that address, and add the entry
themselves using dsa_towards_port().
This should help understand the answer to the first question: the port
returned by dsa_slave_dev_lower_find may not be on the same switch as
the ports that offload the LAG. Nonetheless, if the driver implements
.crosschip_lag_join and .crosschip_bridge_join as mv88e6xxx does, there
still isn't any reason for trapping addresses learnt on the remote LAG
towards the CPU, and we should prevent that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 728c02089a.
Since 2015 DSA has gained more integration with the network stack, we
can now have the same functionality without explicitly open-coding for
it:
- It now opens the DSA master netdevice automatically whenever a user
netdevice is opened.
- The master and switch interfaces are coupled in an upper/lower
hierarchy using the netdev adjacency lists.
In the nfsroot example below, the interface chosen by autoconfig was
swp3, and every interface except that and the DSA master, eth1, was
brought down afterwards:
[ 8.714215] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 8.978041] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 9.246134] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 9.486203] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 9.512827] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode
[ 9.521047] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control off
[ 9.530382] device eth1 entered promiscuous mode
[ 9.535452] DSA: tree 0 setup
[ 9.539777] printk: console [netcon0] enabled
[ 9.544504] netconsole: network logging started
[ 9.555047] fsl_enetc 0000:00:00.2 eth1: configuring for fixed/internal link mode
[ 9.562790] fsl_enetc 0000:00:00.2 eth1: Link is Up - 1Gbps/Full - flow control off
[ 9.564661] 8021q: adding VLAN 0 to HW filter on device bond0
[ 9.637681] fsl_enetc 0000:00:00.0 eth0: PHY [0000:00:00.0:02] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[ 9.655679] fsl_enetc 0000:00:00.0 eth0: configuring for inband/sgmii link mode
[ 9.666611] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode
[ 9.676216] 8021q: adding VLAN 0 to HW filter on device swp0
[ 9.682086] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode
[ 9.690700] 8021q: adding VLAN 0 to HW filter on device swp1
[ 9.696538] mscc_felix 0000:00:00.5 swp2: configuring for inband/qsgmii link mode
[ 9.705131] 8021q: adding VLAN 0 to HW filter on device swp2
[ 9.710964] mscc_felix 0000:00:00.5 swp3: configuring for inband/qsgmii link mode
[ 9.719548] 8021q: adding VLAN 0 to HW filter on device swp3
[ 9.747811] Sending DHCP requests ..
[ 12.742899] mscc_felix 0000:00:00.5 swp1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 12.743828] mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control off
[ 12.747062] IPv6: ADDRCONF(NETDEV_CHANGE): swp1: link becomes ready
[ 12.755216] fsl_enetc 0000:00:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 12.766603] IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready
[ 12.783188] mscc_felix 0000:00:00.5 swp2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 12.785354] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.799535] IPv6: ADDRCONF(NETDEV_CHANGE): swp2: link becomes ready
[ 13.803141] mscc_felix 0000:00:00.5 swp3: Link is Up - 1Gbps/Full - flow control rx/tx
[ 13.811646] IPv6: ADDRCONF(NETDEV_CHANGE): swp3: link becomes ready
[ 15.452018] ., OK
[ 15.470336] IP-Config: Got DHCP answer from 10.0.0.1, my address is 10.0.0.39
[ 15.477887] IP-Config: Complete:
[ 15.481330] device=swp3, hwaddr=00:04:9f:05:de:0a, ipaddr=10.0.0.39, mask=255.255.255.0, gw=10.0.0.1
[ 15.491846] host=10.0.0.39, domain=(none), nis-domain=(none)
[ 15.498429] bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath=
[ 15.498481] nameserver0=8.8.8.8
[ 15.627542] fsl_enetc 0000:00:00.0 eth0: Link is Down
[ 15.690903] mscc_felix 0000:00:00.5 swp0: Link is Down
[ 15.745216] mscc_felix 0000:00:00.5 swp1: Link is Down
[ 15.800498] mscc_felix 0000:00:00.5 swp2: Link is Down
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 1532b97784.
The above commit is good and it works, however it was meant as a bugfix
for stable kernels and now we have more self-contained ways in DSA to
handle the situation where the DSA master must be brought up.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is not fixing any actual bug that I know of, but having a DSA
interface that is up even when its lower (master) interface is down is
one of those things that just do not sound right.
Yes, DSA checks if the master is up before actually bringing the
user interface up, but nobody prevents bringing the master interface
down immediately afterwards... Then the user ports would attempt
dev_queue_xmit on an interface that is down, and wonder what's wrong.
This patch prevents that from happening. NETDEV_GOING_DOWN is the
notification emitted _before_ the master actually goes down, and we are
protected by the rtnl_mutex, so all is well.
For those of you reading this because you were doing switch testing
such as latency measurements for autonomously forwarded traffic, and you
needed a controlled environment with no extra packets sent by the
network stack, this patch breaks that, because now the user ports go
down too, which may shut down the PHY etc. But please don't do it like
that, just do instead:
tc qdisc add dev eno2 clsact
tc filter add dev eno2 egress flower action drop
Tested with two cascaded DSA switches:
$ ip link set eno2 down
sja1105 spi2.0 sw0p2: Link is Down
mscc_felix 0000:00:00.5 swp0: Link is Down
fsl_enetc 0000:00:00.2 eno2: Link is Down
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DSA wants the master interface to be open before the user port is due to
historical reasons. The promiscuity of interfaces that are down used to
have issues, as referenced Lennert Buytenhek in commit df02c6ff2e
("dsa: fix master interface allmulti/promisc handling").
The bugfix mentioned there, commit b6c40d68ff ("net: only invoke
dev->change_rx_flags when device is UP"), was basically a "don't do
that" approach to working around the promiscuity while down issue.
Further work done by Vlad Yasevich in commit d2615bf450 ("net: core:
Always propagate flag changes to interfaces") has resolved the
underlying issue, and it is strictly up to the DSA and 8021q drivers
now, it is no longer mandated by the networking core that the master
interface must be up when changing its promiscuity.
From DSA's point of view, deciding to error out in dsa_slave_open
because the master isn't up is
(a) a bad user experience and
(b) knocking at an open door.
Even if there still was an issue with promiscuity while down, DSA could
still just open the master and avoid it.
Doing it this way has the additional benefit that user space can now
remove DSA-specific workarounds, like systemd-networkd with BindCarrier:
https://github.com/systemd/systemd/issues/7478
And we can finally remove one of the 2 bullets in the "Common pitfalls
using DSA setups" chapter.
Tested with two cascaded DSA switches:
$ ip link set sw0p2 up
fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode
fsl_enetc 0000:00:00.2 eno2: Link is Up - 1Gbps/Full - flow control rx/tx
mscc_felix 0000:00:00.5 swp0: configuring for fixed/sgmii link mode
mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control off
8021q: adding VLAN 0 to HW filter on device swp0
sja1105 spi2.0 sw0p2: configuring for phy/rgmii-id link mode
IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a few assertions to make sure functions are called with the needed
locks held.
Two functions gain might_sleep annotations because they contain
conditional calls to functions that sleep.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current implementation of {netdev,napi}_alloc_frag(), it doesn't
have any align guarantee for the returned buffer address, But for some
hardwares they do require the DMA buffer to be aligned correctly,
so we would have to use some workarounds like below if the buffers
allocated by the {netdev,napi}_alloc_frag() are used by these hardwares
for DMA.
buf = napi_alloc_frag(really_needed_size + align);
buf = PTR_ALIGN(buf, align);
These codes seems ugly and would waste a lot of memories if the buffers
are used in a network driver for the TX/RX. We have added the align
support for the page_frag functions, so add the corresponding
{netdev,napi}_frag functions.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)).
net/bridge/br_multicast.c:1246:9-16: WARNING: ERR_CAST can be used with mp
Generated by: scripts/coccinelle/api/err_cast.cocci
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20210204070549.83636-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Third, and most likely the last, set of fixes for v5.11. Two very
small fixes.
ath9k
* fix build regression related to LEDS_CLASS
mt76
* fix a memory leak
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJgHXLXAAoJEG4XJFUm622bSswIAKKUL+5rtTO5REcOgQLfjnDf
FacTFREGoQTmzAOyuXNpM+ULEqsQ4keilGmCWqteuIuVm4Tlpqkyo6z/cyHU6RBO
FR1Laayu96Ir7Wcig7S0UL8vz01oZJxcOo1Ijm+w+TVfBCbDdH9bk9NlP7e7sH2j
7wfCo9OMMcnL52QpN1+lI2xC+IF9DTyKM8FjTuymQBFD/45b7mxidIpoZtpMd+ES
/qQJj92j6ysa44rZvuY5aN5XtmQd0rYZhMu9E7RMm2jo6go4o6FvtIwqcz3Fqsxl
hjOzIyBZpQHH9dTaKGKcaoPfjXgePovuk4Gh2KOlCgYkxeWtdpyoOqcPOu1VlbU=
=/Zue
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.11
Third, and most likely the last, set of fixes for v5.11. Two very
small fixes.
ath9k
* fix build regression related to LEDS_CLASS
mt76
* fix a memory leak
* tag 'wireless-drivers-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers:
mt76: dma: fix a possible memory leak in mt76_add_fragment()
ath9k: fix build error with LEDS_CLASS=m
====================
Link: https://lore.kernel.org/r/20210205163434.14D94C433ED@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kernel-doc can only correctly identify the documented function or struct
when the name in the first kernel-doc line references it. But some of the
kernel-doc blocks referenced a different function/struct then it actually
documented.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batadv_dhcp_packet is used to read in parts of the DHCP packet and
extract relevant information for the distributed arp table. But the
structure contained the flexible member "options" which is no where used in
the code.
A sizeof on this kind of type would return the size of everything except
the flexible member. But sparse will detect this kind of sizeof and warn
with
warning: using sizeof on a flexible structure
This can be avoided by dropping the unused flexible member.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batman-adv source code was using the year of publication (to net-next)
as "last" year for the copyright statement. The whole source code mentioned
in the MAINTAINERS "BATMAN ADVANCED" section was handled as a single entity
regarding the publishing year.
This avoided having outdated (in sense of year information - not copyright
holder) publishing information inside several files. But since the simple
"update copyright year" commit (without other changes) in the file was not
well received in the upstream kernel, the option to not have a copyright
year (for initial and last publication) in the files are chosen instead.
More detailed information about the years can still be retrieved from the
SCM system.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Commit c80794323e ("net: Fix packet reordering caused by GRO and
listified RX cooperation") had the unfortunate effect of adding
latencies in common workloads.
Before the patch, GRO packets were immediately passed to
upper stacks.
After the patch, we can accumulate quite a lot of GRO
packets (depdending on NAPI budget).
My fix is counting in napi->rx_count number of segments
instead of number of logical packets.
Fixes: c80794323e ("net: Fix packet reordering caused by GRO and listified RX cooperation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: John Sperbeck <jsperbeck@google.com>
Tested-by: Jian Yang <jianyang@google.com>
Cc: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/20210204213146.4192368-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable err is being assigned a value that is never read,
the same error number is being returned at the error return
path via label err1. Clean up the code by removing the assignment.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since commit 9ed5af268e ("SUNRPC: Clean up the handling of page
padding in rpc_prepare_reply_pages()") [Dec 2020] the NFS client
passes payload data to the transport with the padding in xdr->pages
instead of in the send buffer's tail kvec. There's no need for the
extra logic to advance the base of the tail kvec because the upper
layer no longer places XDR padding there.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The NetApp Linux team discovered that with NFS/RDMA servers that do
not support RFC 8797, the Linux client is forming NFSv4.x WRITE
requests incorrectly.
In this case, the Linux NFS client disables implicit chunk round-up
for odd-length Read and Write chunks. The goal was to support old
servers that needed that padding to be sent explicitly by clients.
In that case the Linux NFS included the tail kvec in the Read chunk,
since the tail contains any needed padding. That meant a separate
memory registration is needed for the tail kvec, adding to the cost
of forming such requests. To avoid that cost for a mere 3 bytes of
zeroes that are always ignored by receivers, we try to use implicit
roundup when possible.
For NFSv4.x, the tail kvec also sometimes contains a trailing
GETATTR operation. The Linux NFS client unintentionally includes
that GETATTR operation in the Read chunk as well as inline.
The fix is simply to /never/ include the tail kvec when forming a
data payload Read chunk. The padding is thus now always present.
Note that since commit 9ed5af268e ("SUNRPC: Clean up the handling
of page padding in rpc_prepare_reply_pages()") [Dec 2020] the NFS
client passes payload data to the transport with the padding in
xdr->pages instead of in the send buffer's tail kvec. So now the
Linux NFS client appends XDR padding to all odd-sized Read chunks.
This shouldn't be a problem because:
- RFC 8166-compliant servers are supposed to work with or without
that XDR padding in Read chunks.
- Since the padding is now in the same memory region as the data
payload, a separate memory registration is not needed. In
addition, the link layer extends data in RDMA Read responses to
4-byte boundaries anyway. Thus there is now no savings when the
padding is not included.
Because older kernels include the payload's XDR padding in the
tail kvec, a fix there will be more complicated. Thus backporting
this patch is not recommended.
Reported by: Olga Kornievskaia <Olga.Kornievskaia@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
During the final stages of publication of RFC 8167, reviewers
requested that we use the term "reverse direction" rather than
"backwards direction". Update comments to reflect this preference.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up so that offset_in_page() is invoked less often in the
most common case, which is mapping xdr->pages.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Remove a conditional branch from the SGL set-up loop in frwr_map():
Instead of using either sg_set_page() or sg_set_buf(), initialize
the mr_page field properly when rpcrdma_convert_kvec() converts the
kvec to an SGL entry. frwr_map() can then invoke sg_set_page()
unconditionally.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Support for FMR was removed by commit ba69cd122e ("xprtrdma:
Remove support for FMR memory registration") [Dec 2018]. That means
the buffer-splitting behavior of rpcrdma_convert_kvec(), added by
commit 821c791a0b ("xprtrdma: Segment head and tail XDR buffers
on page boundaries") [Mar 2016], is no longer necessary. FRWR
memory registration handles this case with aplomb.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This version will contain all the (major or even only minor) changes for
Linux 5.12.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix combination of --reap and --update in xt_recent that triggers
UAF, from Jozsef Kadlecsik.
2) Fix current year in nft_meta selftest, from Fabian Frederick.
3) Fix possible UAF in the netns destroy path of nftables.
4) Fix incorrect checksum calculation when mangling ports in flowtable,
from Sven Auhagen.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: flowtable: fix tcp and udp header checksum update
netfilter: nftables: fix possible UAF over chains from packet path in netns
selftests: netfilter: fix current year
netfilter: xt_recent: Fix attempt to update deleted entry
====================
Link: https://lore.kernel.org/r/20210205001727.2125-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since teardown is supposed to undo the effects of the setup method, it
should be called in the error path for dsa_switch_setup, not just in
dsa_switch_teardown.
Fixes: 5e3f847a02 ("net: dsa: Add teardown callback for drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210204163351.2929670-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When iteratively computing a checksum with csum_block_add, track the
offset "pos" to correctly rotate in csum_block_add when offset is odd.
The open coded implementation of skb_copy_and_csum_datagram did this.
With the switch to __skb_datagram_iter calling csum_and_copy_to_iter,
pos was reinitialized to 0 on each call.
Bring back the pos by passing it along with the csum to the callback.
Changes v1->v2
- pass csum value, instead of csump pointer (Alexander Duyck)
Link: https://lore.kernel.org/netdev/20210128152353.GB27281@optiplex/
Fixes: 950fcaecd5 ("datagram: consolidate datagram copy to iter helpers")
Reported-by: Oliver Graute <oliver.graute@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210203192952.1849843-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When doing encap_enable/increasing encap_needed_key, up->encap_enabled
is not set in rxrpc_open_socket(), and it will cause encap_needed_key
not being decreased in udpv6_destroy_sock().
This patch is to improve it by just calling udp_tunnel_encap_enable()
where it increases both UDP and UDPv6 encap_needed_key and sets
up->encap_enabled.
v4->v5:
- add the missing '#include <net/udp_tunnel.h>', as David Howells
noticed.
Acked-and-tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When enabling encap for a ipv6 socket without udp_encap_needed_key
increased, UDP GRO won't work for v4 mapped v6 address packets as
sk will be NULL in udp4_gro_receive().
This patch is to enable it by increasing udp_encap_needed_key for
v6 sockets in udp_tunnel_encap_enable(), and correspondingly
decrease udp_encap_needed_key in udpv6_destroy_sock().
v1->v2:
- add udp_encap_disable() and export it.
v2->v3:
- add the change for rxrpc and bareudp into one patch, as Alex
suggested.
v3->v4:
- move rxrpc part to another patch.
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pool_page_reusable() is a leftover from pre-NUMA-aware times. For now,
this function is just a redundant wrapper over page_is_pfmemalloc(),
so inline it into its sole call site.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the end of rxrpc_release_call(), rxrpc_cleanup_ring() is called to clear
the Rx/Tx skbuff ring, but this doesn't lock the ring whilst it's accessing
it. Unfortunately, rxrpc_resend() might be trying to retransmit a packet
concurrently with this - and whilst it does lock the ring, this isn't
protection against rxrpc_cleanup_call().
Fix this by removing the call to rxrpc_cleanup_ring() from
rxrpc_release_call(). rxrpc_cleanup_ring() will be called again anyway
from rxrpc_cleanup_call(). The earlier call is just an optimisation to
recycle skbuffs more quickly.
Alternative solutions include rxrpc_release_call() could try to cancel the
work item or wait for it to complete or rxrpc_cleanup_ring() could lock
when accessing the ring (which would require a bh lock).
This can produce a report like the following:
BUG: KASAN: use-after-free in rxrpc_send_data_packet+0x19b4/0x1e70 net/rxrpc/output.c:372
Read of size 4 at addr ffff888011606e04 by task kworker/0:0/5
...
Workqueue: krxrpcd rxrpc_process_call
Call Trace:
...
kasan_report.cold+0x79/0xd5 mm/kasan/report.c:413
rxrpc_send_data_packet+0x19b4/0x1e70 net/rxrpc/output.c:372
rxrpc_resend net/rxrpc/call_event.c:266 [inline]
rxrpc_process_call+0x1634/0x1f60 net/rxrpc/call_event.c:412
process_one_work+0x98d/0x15f0 kernel/workqueue.c:2275
...
Allocated by task 2318:
...
sock_alloc_send_pskb+0x793/0x920 net/core/sock.c:2348
rxrpc_send_data+0xb51/0x2bf0 net/rxrpc/sendmsg.c:358
rxrpc_do_sendmsg+0xc03/0x1350 net/rxrpc/sendmsg.c:744
rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:560
...
Freed by task 2318:
...
kfree_skb+0x140/0x3f0 net/core/skbuff.c:704
rxrpc_free_skb+0x11d/0x150 net/rxrpc/skbuff.c:78
rxrpc_cleanup_ring net/rxrpc/call_object.c:485 [inline]
rxrpc_release_call+0x5dd/0x860 net/rxrpc/call_object.c:552
rxrpc_release_calls_on_socket+0x21c/0x300 net/rxrpc/call_object.c:579
rxrpc_release_sock net/rxrpc/af_rxrpc.c:885 [inline]
rxrpc_release+0x263/0x5a0 net/rxrpc/af_rxrpc.c:916
__sock_release+0xcd/0x280 net/socket.c:597
...
The buggy address belongs to the object at ffff888011606dc0
which belongs to the cache skbuff_head_cache of size 232
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Reported-by: syzbot+174de899852504e4a74a@syzkaller.appspotmail.com
Reported-by: syzbot+3d1c772efafd3c38d007@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
Link: https://lore.kernel.org/r/161234207610.653119.5287360098400436976.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit fixes the errores reported when building for powerpc:
ERROR: modpost: "ip6_dst_check" [vmlinux] is a static EXPORT_SYMBOL
ERROR: modpost: "ipv4_dst_check" [vmlinux] is a static EXPORT_SYMBOL
ERROR: modpost: "ipv4_mtu" [vmlinux] is a static EXPORT_SYMBOL
ERROR: modpost: "ip6_mtu" [vmlinux] is a static EXPORT_SYMBOL
Fixes: f67fbeaebd ("net: use indirect call helpers for dst_mtu")
Fixes: bbd807dfbf ("net: indirect call helpers for ipv4/ipv6 dst_check functions")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/r/20210204181839.558951-2-brianvv@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Often userspace won't request the extack information, or they don't log it
because of log level or so, and even when they do, sometimes it's not
enough to know exactly what caused the error.
Netlink extack is the standard way of reporting erros with descriptive
error messages. With a trace point on it, we then can know exactly where
the error happened, regardless of userspace app. Also, we can even see if
the err msg was overwritten.
The wrapper do_trace_netlink_extack() is because trace points shouldn't be
called from .h files, as trace points are not that small, and the function
call to do_trace_netlink_extack() on the macros is not protected by
tracepoint_enabled() because the macros are called from modules, and this
would require exporting some trace structs. As this is error path, it's
better to export just the wrapper instead.
v2: removed leftover tracepoint declaration
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/4546b63e67b2989789d146498b13cc09e1fdc543.1612403190.git.marcelo.leitner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Fix the following coccicheck warnings:
./net/ipv6/esp6.c:791:16-18: WARNING !A || A && B is equivalent
to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently, ethtool does not expose how many lanes are used when the
link is up.
After adding a possibility to advertise or force a specific number of
lanes, the lanes in use value can be either the maximum width of the port
or below.
Extend ethtool to expose the number of lanes currently in use for
drivers that support it.
For example:
$ ethtool -s swp1 speed 100000 lanes 4
$ ethtool -s swp2 speed 100000 lanes 4
$ ip link set swp1 up
$ ip link set swp2 up
$ ethtool swp1
Settings for swp1:
Supported ports: [ FIBRE Backplane ]
Supported link modes: 1000baseT/Full
10000baseT/Full
1000baseKX/Full
10000baseKR/Full
10000baseR_FEC
40000baseKR4/Full
40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
50000baseCR2/Full
50000baseKR2/Full
100000baseKR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
50000baseSR2/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
10000baseER/Full
50000baseKR/Full
50000baseSR/Full
50000baseCR/Full
50000baseLR_ER_FR/Full
50000baseDR/Full
100000baseKR2/Full
100000baseSR2/Full
100000baseCR2/Full
100000baseLR2_ER2_FR2/Full
100000baseDR2/Full
200000baseKR4/Full
200000baseSR4/Full
200000baseLR4_ER4_FR4/Full
200000baseDR4/Full
200000baseCR4/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 1000baseT/Full
10000baseT/Full
1000baseKX/Full
1000baseKX/Full
10000baseKR/Full
10000baseR_FEC
40000baseKR4/Full
40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
50000baseCR2/Full
50000baseKR2/Full
100000baseKR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
50000baseSR2/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
10000baseER/Full
200000baseKR4/Full
200000baseSR4/Full
200000baseLR4_ER4_FR4/Full
200000baseDR4/Full
200000baseCR4/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Advertised link modes: 100000baseKR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: 100000Mb/s
Lanes: 4
Duplex: Full
Auto-negotiation: on
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when user space queries the link's parameters, as speed and
duplex, each parameter is passed from the driver to ethtool.
Instead, get the link mode bit in use, and derive each of the parameters
from it in ethtool.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when auto negotiation is on, the user can advertise all the
linkmodes which correspond to a specific speed, but does not have a
similar selector for the number of lanes. This is significant when a
specific speed can be achieved using different number of lanes. For
example, 2x50 or 4x25.
Add 'ETHTOOL_A_LINKMODES_LANES' attribute and expand 'struct
ethtool_link_settings' with lanes field in order to implement a new
lanes-selector that will enable the user to advertise a specific number
of lanes as well.
When auto negotiation is off, lanes parameter can be forced only if the
driver supports it. Add a capability bit in 'struct ethtool_ops' that
allows ethtool know if the driver can handle the lanes parameter when
auto negotiation is off, so if it does not, an error message will be
returned when trying to set lanes.
Example:
$ ethtool -s swp1 lanes 4
$ ethtool swp1
Settings for swp1:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseKX/Full
10000baseKR/Full
40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
25000baseCR/Full
25000baseSR/Full
50000baseCR2/Full
100000baseSR4/Full
100000baseCR4/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
100000baseSR4/Full
100000baseCR4/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: on
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Link detected: no
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new function for input validations to be called before
rtnl_lock() and move the master slave validation to that function.
This would be a cleanup for next patch that would add another validation
to the new function.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bridge emits VLAN filtering events and quite a few others via
switchdev with orig_dev = br->dev. After the blamed commit, these events
started getting ignored.
The point of the patch was to not offload switchdev objects for ports
that didn't go through dsa_port_bridge_join, because the configuration
is unsupported:
- ports that offload a bonding/team interface go through
dsa_port_bridge_join when that bonding/team interface is later bridged
with another switch port or LAG
- ports that don't offload LAG don't get notified of the bridge that is
on top of that LAG.
Sadly, a check is missing, which is that the orig_dev is equal to the
bridge device. This check is compatible with the original intention,
because ports that don't offload bridging because they use a software
LAG don't have dp->bridge_dev set.
On a semi-related note, we should not offload switchdev objects or
populate dp->bridge_dev if the driver doesn't implement .port_bridge_join
either. However there is no regression associated with that, so it can
be done separately.
Fixes: 5696c8aedf ("net: dsa: Don't offload port attributes on standalone ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Tobias Waldekranz <tobias@waldekranz.com>
Link: https://lore.kernel.org/r/20210202233109.1591466-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When updating the tcp or udp header checksum on port nat the function
inet_proto_csum_replace2 with the last parameter pseudohdr as true.
This leads to an error in the case that GRO is used and packets are
split up in GSO. The tcp or udp checksum of all packets is incorrect.
The error is probably masked due to the fact the most network driver
implement tcp/udp checksum offloading. It also only happens when GRO is
applied and not on single packets.
The error is most visible when using a pppoe connection which is not
triggering the tcp/udp checksum offload.
Fixes: ac2a66665e ("netfilter: add generic flow table infrastructure")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Split ndo_xdp_xmit and ndo_start_xmit use cases in veth_xdp_rcv routine
in order to alloc skbs in bulk for XDP_PASS verdict.
Introduce xdp_alloc_skb_bulk utility routine to alloc skb bulk list.
The proposed approach has been tested in the following scenario:
eth (ixgbe) --> XDP_REDIRECT --> veth0 --> (remote-ns) veth1 --> XDP_PASS
XDP_REDIRECT: xdp_redirect_map bpf sample
XDP_PASS: xdp_rxq_info bpf sample
traffic generator: pkt_gen sending udp traffic on a remote device
bpf-next master: ~3.64Mpps
bpf-next + skb bulking allocation: ~3.79Mpps
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/a14a30d3c06fff24e13f836c733d80efc0bd6eb5.1611957532.git.lorenzo@kernel.org
Although hooks are released via call_rcu(), chain and rule objects are
immediately released while packets are still walking over these bits.
This patch adds the .pre_exit callback which is invoked before
synchronize_rcu() in the netns framework to stay safe.
Remove a comment which is not valid anymore since the core does not use
synchronize_net() anymore since 8c873e2199 ("netfilter: core: free
hooks with call_rcu").
Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: df05ef874b ("netfilter: nf_tables: release objects on netns destruction")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When both --reap and --update flag are specified, there's a code
path at which the entry to be updated is reaped beforehand,
which then leads to kernel crash. Reap only entries which won't be
updated.
Fixes kernel bugzilla #207773.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207773
Reported-by: Reindl Harald <h.reindl@thelounge.net>
Fixes: 0079c5aee3 ("netfilter: xt_recent: add an entry reaper")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch avoids the indirect call for the common case:
ip6_dst_check and ipv4_dst_check
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch avoids the indirect call for the common case:
ip6_mtu and ipv4_mtu
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch avoids the indirect call for the common case:
ip6_output and ip_output
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch avoids the indirect call for the common case:
ip_local_deliver and ip6_input
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_gro_receive() and inet_gro_complete() are part
of GRO engine which can not be modular.
Similarly, inet_gso_segment() does not need to be exported,
being part of GSO stack.
In other words, net/ipv6/ip6_offload.o is part of vmlinux,
regardless of CONFIG_IPV6.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20210202154145.1568451-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- cfg80211_dev_rename() requires RTNL
- cfg80211_change_iface() and cfg80211_set_encryption()
require wiphy mutex (was missing in wireless extensions)
- cfg80211_destroy_ifaces() requires wiphy mutex
- netdev registration can fail due to notifiers, and then
notifiers are "unrolled", need to handle this properly
-----BEGIN PGP SIGNATURE-----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=bgnR
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
This time, only RTNL locking reduction fallout.
- cfg80211_dev_rename() requires RTNL
- cfg80211_change_iface() and cfg80211_set_encryption()
require wiphy mutex (was missing in wireless extensions)
- cfg80211_destroy_ifaces() requires wiphy mutex
- netdev registration can fail due to notifiers, and then
notifiers are "unrolled", need to handle this properly
* tag 'mac80211-next-for-net-next-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next:
cfg80211: fix netdev registration deadlock
cfg80211: call cfg80211_destroy_ifaces() with wiphy lock held
wext: call cfg80211_set_encryption() with wiphy lock held
wext: call cfg80211_change_iface() with wiphy lock held
nl80211: call cfg80211_dev_rename() under RTNL
====================
Link: https://lore.kernel.org/r/20210202144106.38207-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the mibs for ADD_ADDR with port:
MPTCP_MIB_PORTADD for received ADD_ADDR suboption with a port number.
MPTCP_MIB_PORTSYNRX, MPTCP_MIB_PORTSYNACKRX, MPTCP_MIB_PORTACKRX, for
received MP_JOIN's SYN or SYN/ACK or ACK with a port number which is
different from the msk's port number.
MPTCP_MIB_MISMATCHPORTSYNRX and MPTCP_MIB_MISMATCHPORTACKRX, for
received SYN or ACK MP_JOIN with a mismatched port-number.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds MPTCP_PM_ADDR_ATTR_PORT filling and parsing in PM
netlink.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When dealing with the addresses list local_addr_list or anno_list, we
should enable the function addresses_equal's parameter use_port. And
enable it in address_zero too.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds two new helpers, subflow_use_different_sport and
subflow_use_different_dport, to check whether the subflow's source or
destination port number is different from the msk's port number. When
receiving the MP_JOIN's SYN/SYNACK/ACK, we do these port number checks
and print out the different port numbers.
And furthermore, when receiving the MP_JOIN's SYN/ACK, we also use a new
helper mptcp_pm_sport_in_anno_list to check whether this port number is
announced. If it isn't, we need to abort this connection.
This patch also populates the local address's port field in
local_address.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new helper named subflow_req_create_thmac, which is
extracted from subflow_token_join_request. It initializes subflow_req's
local_nonce and thmac fields, those are the more expensive to populate.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch drops the unused parameter skb in subflow_token_join_request.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch creates a listening socket when an address with a port-number
is added by PM netlink. Then binds the new port to the socket, and
listens for new connections.
When the address is removed or the addresses are flushed by PM netlink,
release the listening socket.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changes the sending ACK conditions for the ADD_ADDR, send an
ACK packet for any ADD_ADDR, not just when ipv6 addresses or port
numbers are included.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/139
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when a new MPTCP endpoint is added, the existing MPTCP
sockets are not affected.
This patch implements a new function mptcp_nl_add_subflow_or_signal_addr,
invoked when an address is added from PM netlink. This function traverses
the MPTCP sockets list and invokes mptcp_pm_create_subflow_or_signal_addr
to try to create a subflow or signal an address for the newly added
address, if local constraint allows that.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/19
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch drops the per-msk values add_addr_signal_max,
add_addr_accept_max, local_addr_max and subflows_max fields in struct
mptcp_pm_data, uses the pernet *_max values instead. And adds four new
helpers to get the pernet *_max values separately.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch uses WRITE_ONCE() for all the pernet add_addr_signal_max,
add_addr_accept_max, local_addr_max and subflows_max fields in struct
pm_nl_pernet to avoid concurrency issues.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel,
but not necessarily in hardware.
The asynchronous nature of route installation in hardware can lead
to a routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.
It is also possible for a route already installed in hardware to change
its action and therefore its flags. For example, a host route that is
trapping packets can be "promoted" to perform decapsulation following
the installation of an IPinIP/VXLAN tunnel.
Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed. The aim is to provide an indication to user-space
(e.g., routing daemons) about the state of the route in hardware.
Introduce a sysctl that controls this behavior.
Keep the default value at 0 (i.e., do not emit notifications) for several
reasons:
- Multiple RTM_NEWROUTE notification per-route might confuse existing
routing daemons.
- Convergence reasons in routing daemons.
- The extra notifications will negatively impact the insertion rate.
- Not all users are interested in these notifications.
Move fib6_info_hw_flags_set() to C file because it is no longer a short
function.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel,
but not necessarily in hardware.
The asynchronous nature of route installation in hardware can lead to a
routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.
It is also possible for a route already installed in hardware to change
its action and therefore its flags. For example, a host route that is
trapping packets can be "promoted" to perform decapsulation following
the installation of an IPinIP/VXLAN tunnel.
Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed. The aim is to provide an indication to user-space
(e.g., routing daemons) about the state of the route in hardware.
Introduce a sysctl that controls this behavior.
Keep the default value at 0 (i.e., do not emit notifications) for several
reasons:
- Multiple RTM_NEWROUTE notification per-route might confuse existing
routing daemons.
- Convergence reasons in routing daemons.
- The extra notifications will negatively impact the insertion rate.
- Not all users are interested in these notifications.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Publish fib_nlmsg_size() to allow it to be used later on from
fib_alias_hw_flags_set().
Remove the inline keyword since it shouldn't be used inside C files.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib_dump_info() does not change 'fri', so pass it as 'const'.
It will later allow us to invoke fib_dump_info() from
fib_alias_hw_flags_set().
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid the assumption that ksize(kmalloc(S)) == ksize(kmalloc(S)): when
cloning an skb, save and restore truesize after pskb_expand_head(). This
can occur if the allocator decides to service an allocation of the same
size differently (e.g. use a different size class, or pass the
allocation on to KFENCE).
Because truesize is used for bookkeeping (such as sk_wmem_queued), a
modified truesize of a cloned skb may result in corrupt bookkeeping and
relevant warnings (such as in sk_stream_kill_queues()).
Link: https://lkml.kernel.org/r/X9JR/J6dMMOy1obu@elver.google.com
Reported-by: syzbot+7b99aafdcc2eedea6178@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210201160420.2826895-1-elver@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With version 0 of the protocol it was legal to encode the 'Subflow Id' in
the MP_PRIO suboption, to specify which subflow would change its 'Backup'
flag. This has been removed from v1 specification: thus, according to RFC
8684 §3.3.8, the resulting 'Length' for MP_PRIO changed from 4 to 3 byte.
Current Linux generates / parses MP_PRIO according to the old spec, using
'Length' equal to 4, and hardcoding 1 as 'Subflow Id'; RFC compliance can
improve if we change 'Length' in other to become 3, leaving a 'Nop' after
the MP_PRIO suboption. In this way the kernel will emit and accept *only*
MP_PRIO suboptions that are compliant to version 1 of the MPTCP protocol.
unpatched 5.11-rc kernel:
[root@bottarga ~]# tcpdump -tnnr unpatched.pcap | grep prio
reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1)
dropped privs to tcpdump
IP 10.0.3.2.48433 > 10.0.1.1.10006: Flags [.], ack 1, win 502, options [nop,nop,TS val 4032325513 ecr 1876514270,mptcp prio non-backup id 1,mptcp dss ack 14084896651682217737], length 0
patched 5.11-rc kernel:
[root@bottarga ~]# tcpdump -tnnr patched.pcap | grep prio
reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1)
dropped privs to tcpdump
IP 10.0.3.2.49735 > 10.0.1.1.10006: Flags [.], ack 1, win 502, options [nop,nop,TS val 1276737699 ecr 2686399734,mptcp prio non-backup,nop,mptcp dss ack 18433038869082491686], length 0
Changes since v2:
- when accounting for option space, don't increment 'TCPOLEN_MPTCP_PRIO'
and use 'TCPOLEN_MPTCP_PRIO_ALIGN' instead, thanks to Matthieu Baerts.
Changes since v1:
- refactor patch to avoid using 'TCPOLEN_MPTCP_PRIO' with its old value,
thanks to Geliang Tang.
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matteo Croce <mcroce@linux.microsoft.com>
Link: https://lore.kernel.org/r/846cdd41e6ad6ec88ef23fee1552ab39c2f5a3d1.1612184361.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
trees.
Current release - regressions:
- ip_tunnel: fix mtu calculation
- mlx5: fix function calculation for page trees
Previous releases - regressions:
- vsock: fix the race conditions in multi-transport support
- neighbour: prevent a dead entry from updating gc_list
- dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add
Previous releases - always broken:
- bpf, cgroup: two copy_{from,to}_user() warn_on_once splats for BPF
cgroup getsockopt infra when user space is trying
to race against optlen, from Loris Reiff.
- bpf: add missing fput() in BPF inode storage map update helper
- udp: ipv4: manipulate network header of NATed UDP GRO fraglist
- mac80211: fix station rate table updates on assoc
- r8169: work around RTL8125 UDP HW bug
- igc: report speed and duplex as unknown when device is runtime
suspended
- rxrpc: fix deadlock around release of dst cached on udp tunnel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZByM
-----END PGP SIGNATURE-----
Merge tag 'net-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.11-rc7, including fixes from bpf and mac80211
trees.
Current release - regressions:
- ip_tunnel: fix mtu calculation
- mlx5: fix function calculation for page trees
Previous releases - regressions:
- vsock: fix the race conditions in multi-transport support
- neighbour: prevent a dead entry from updating gc_list
- dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add
Previous releases - always broken:
- bpf, cgroup: two copy_{from,to}_user() warn_on_once splats for BPF
cgroup getsockopt infra when user space is trying to race against
optlen, from Loris Reiff.
- bpf: add missing fput() in BPF inode storage map update helper
- udp: ipv4: manipulate network header of NATed UDP GRO fraglist
- mac80211: fix station rate table updates on assoc
- r8169: work around RTL8125 UDP HW bug
- igc: report speed and duplex as unknown when device is runtime
suspended
- rxrpc: fix deadlock around release of dst cached on udp tunnel"
* tag 'net-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundary
net: ipa: fix two format specifier errors
net: ipa: use the right accessor in ipa_endpoint_status_skip()
net: ipa: be explicit about endianness
net: ipa: add a missing __iomem attribute
net: ipa: pass correct dma_handle to dma_free_coherent()
r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set
net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGS
net: mvpp2: TCAM entry enable should be written after SRAM data
net: lapb: Copy the skb before sending a packet
net/mlx5e: Release skb in case of failure in tc update skb
net/mlx5e: Update max_opened_tc also when channels are closed
net/mlx5: Fix leak upon failure of rule creation
net/mlx5: Fix function calculation for page trees
docs: networking: swap words in icmp_errors_use_inbound_ifaddr doc
udp: ipv4: manipulate network header of NATed UDP GRO fraglist
net: ip_tunnel: fix mtu calculation
vsock: fix the race conditions in multi-transport support
net: sched: replaced invalid qdisc tree flush helper in qdisc_replace
ibmvnic: device remove has higher precedence over reset
...
sup_multicast_addr is passed to ether_addr_equal for address comparison
which casts the address inputs to u16 leading to an unaligned access.
Aligning the sup_multicast_addr to u16 boundary fixes the issue.
Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com>
Link: https://lore.kernel.org/r/20210202090304.2740471-1-ennoerlangen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot found WARNING in rds_rdma_extra_size [1] when RDS_CMSG_RDMA_ARGS
control message is passed with user-controlled
0x40001 bytes of args->nr_local, causing order >= MAX_ORDER condition.
The exact value 0x40001 can be checked with UIO_MAXIOV which is 0x400.
So for kcalloc() 0x400 iovecs with sizeof(struct rds_iovec) = 0x10
is the closest limit, with 0x10 leftover.
Same condition is currently done in rds_cmsg_rdma_args().
[1] WARNING: mm/page_alloc.c:5011
[..]
Call Trace:
alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267
alloc_pages include/linux/gfp.h:547 [inline]
kmalloc_order+0x2e/0xb0 mm/slab_common.c:837
kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853
kmalloc_array include/linux/slab.h:592 [inline]
kcalloc include/linux/slab.h:621 [inline]
rds_rdma_extra_size+0xb2/0x3b0 net/rds/rdma.c:568
rds_rm_size net/rds/send.c:928 [inline]
Reported-by: syzbot+1bd2b07f93745fa38425@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/20210201203233.1324704-1-snovitoll@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sending a packet, we will prepend it with an LAPB header.
This modifies the shared parts of a cloned skb, so we should copy the
skb rather than just clone it, before we prepend the header.
In "Documentation/networking/driver.rst" (the 2nd point), it states
that drivers shouldn't modify the shared parts of a cloned skb when
transmitting.
The "dev_queue_xmit_nit" function in "net/core/dev.c", which is called
when an skb is being sent, clones the skb and sents the clone to
AF_PACKET sockets. Because the LAPB drivers first remove a 1-byte
pseudo-header before handing over the skb to us, if we don't copy the
skb before prepending the LAPB header, the first byte of the packets
received on AF_PACKET sockets can be corrupted.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20210201055706.415842-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- station rate tables were not updated correctly
after association, leading to bad configuration
- rtl8723bs (staging) was initializing data incorrectly
after the previous fix and needed to move the init
later
-----BEGIN PGP SIGNATURE-----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=mEgj
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two fixes:
- station rate tables were not updated correctly
after association, leading to bad configuration
- rtl8723bs (staging) was initializing data incorrectly
after the previous fix and needed to move the init
later
* tag 'mac80211-for-net-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
staging: rtl8723bs: Move wiphy setup to after reading the regulatory settings from the chip
mac80211: fix station rate table updates on assoc
====================
Link: https://lore.kernel.org/r/20210202143505.37610-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UDP/IP header of UDP GROed frag_skbs are not updated even after NAT
forwarding. Only the header of head_skb from ip_finish_output_gso ->
skb_gso_segment is updated but following frag_skbs are not updated.
A call path skb_mac_gso_segment -> inet_gso_segment ->
udp4_ufo_fragment -> __udp_gso_segment -> __udp_gso_segment_list
does not try to update UDP/IP header of the segment list but copy
only the MAC header.
Update port, addr and check of each skb of the segment list in
__udp_gso_segment_list. It covers both SNAT and DNAT.
Fixes: 9fd1ff5d2a (udp: Support UDP fraglist GRO/GSO.)
Signed-off-by: Dongseok Yi <dseok.yi@samsung.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Link: https://lore.kernel.org/r/1611962007-80092-1-git-send-email-dseok.yi@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev->hard_header_len for tunnel interface is set only when header_ops
are set too and already contains full overhead of any tunnel encapsulation.
That's why there is not need to use this overhead twice in mtu calc.
Fixes: fdafed4599 ("ip_gre: set dev->hard_header_len and dev->needed_headroom properly")
Reported-by: Slava Bacherikov <mail@slava.cc>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1611959267-20536-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are multiple similar bugs implicitly introduced by the
commit c0cfa2d8a7 ("vsock: add multi-transports support") and
commit 6a2c096210 ("vsock: prevent transport modules unloading").
The bug pattern:
[1] vsock_sock.transport pointer is copied to a local variable,
[2] lock_sock() is called,
[3] the local variable is used.
VSOCK multi-transport support introduced the race condition:
vsock_sock.transport value may change between [1] and [2].
Let's copy vsock_sock.transport pointer to local variables after
the lock_sock() call.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20210201084719.2257066-1-alex.popov@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If register_netdevice() fails after having called cfg80211's
netdev notifier (cfg80211_netdev_notifier_call) it will call
the notifier again with UNREGISTER. This would then lock the
wiphy mutex because we're marked as registered, which causes
a deadlock.
Fix this by separately keeping track of whether or not we're
in the middle of registering to also skip the notifier call
on this unregister.
Reported-by: syzbot+2ae0ca9d7737ad1a62b7@syzkaller.appspotmail.com
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Link: https://lore.kernel.org/r/20210201192048.ed8bad436737.I7cae042c44b15f80919a285799a15df467e9d42d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a peer device doesn't support eSCO 2M we should skip the params that
use it when setting up sync connection since they will always fail.
Signed-off-by: Yu Liu <yudiliu@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Few trivial and rudimentary spell corrections.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This comment was introduced by commit 6ea44adce9
("SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()").
I believe EIO was a typo at the time: it should have been EAGAIN.
Subsequently, commit 0445f92c5d ("SUNRPC: Fix disconnection races")
changed that to ENOTCONN.
Rather than trying to keep the comment here in sync with the code in
xprt_force_disconnect(), make the point in a non-specific way.
Fixes: 6ea44adce9 ("SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()")
Signed-off-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Anj Duvnjak reports that the Kodi.tv NFS client is not able to read
video files from a v5.10.11 Linux NFS server.
The new sendpage-based TCP sendto logic was not attentive to non-
zero page_base values. nfsd_splice_read() sets that field when a
READ payload starts in the middle of a page.
The Linux NFS client rarely emits an NFS READ that is not page-
aligned. All of my testing so far has been with Linux clients, so I
missed this one.
Reported-by: A. Duvnjak <avian@extremenerds.net>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211471
Fixes: 4a85a6a332 ("SUNRPC: Handle TCP socket sends with kernel_sendpage() again")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: A. Duvnjak <avian@extremenerds.net>
If the driver uses .sta_add, station entries are only uploaded after the sta
is in assoc state. Fix early station rate table updates by deferring them
until the sta has been uploaded.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210201083324.3134-1-nbd@nbd.name
[use rcu_access_pointer() instead since we won't dereference here]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Highlights include:
Bugfixes:
- SUNRPC: Handle 0 length opaque XDR object data properly
- Fix a layout segment leak in pnfs_layout_process()
- pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
- pNFS/NFSv4: Improve rejection of out-of-order layouts
- pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
-----BEGIN PGP SIGNATURE-----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=gLzv
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- SUNRPC: Handle 0 length opaque XDR object data properly
- Fix a layout segment leak in pnfs_layout_process()
- pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
- pNFS/NFSv4: Improve rejection of out-of-order layouts
- pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
* tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Handle 0 length opaque XDR object data properly
SUNRPC: Move simple_get_bytes and simple_get_netobj into private header
pNFS/NFSv4: Improve rejection of out-of-order layouts
pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
Following race condition was detected:
<CPU A, t0> - neigh_flush_dev() is under execution and calls
neigh_mark_dead(n) marking the neighbour entry 'n' as dead.
<CPU B, t1> - Executing: __netif_receive_skb() ->
__netif_receive_skb_core() -> arp_rcv() -> arp_process().arp_process()
calls __neigh_lookup() which takes a reference on neighbour entry 'n'.
<CPU A, t2> - Moves further along neigh_flush_dev() and calls
neigh_cleanup_and_release(n), but since reference count increased in t2,
'n' couldn't be destroyed.
<CPU B, t3> - Moves further along, arp_process() and calls
neigh_update()-> __neigh_update() -> neigh_update_gc_list(), which adds
the neighbour entry back in gc_list(neigh_mark_dead(), removed it
earlier in t0 from gc_list)
<CPU B, t4> - arp_process() finally calls neigh_release(n), destroying
the neighbour entry.
This leads to 'n' still being part of gc_list, but the actual
neighbour structure has been freed.
The situation can be prevented from happening if we disallow a dead
entry to have any possibility of updating gc_list. This is what the
patch intends to achieve.
Fixes: 9c29a2f55e ("neighbor: Fix locking order for gc_list changes")
Signed-off-by: Chinmay Agarwal <chinagar@codeaurora.org>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210127165453.GA20514@chinagar-linux.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst
from an incoming packet to get stolen and attached to the UDP socket from
whence it is leaked when that socket is closed.
When a network namespace is removed, the wait for dst records to be cleaned
up happens before the cleanup of the rxrpc and UDP socket, meaning that the
wait never finishes.
Fix this by moving the rxrpc (and, by dependence, the afs) private
per-network namespace registrations to the device group rather than subsys
group. This allows cached rxrpc local endpoints to be cleared and their
UDP sockets closed before we try waiting for the dst records.
The symptom is that lines looking like the following:
unregister_netdevice: waiting for lo to become free
get emitted at regular intervals after running something like the
referenced syzbot test.
Thanks to Vadim for tracking this down and work out the fix.
Reported-by: syzbot+df400f2f24a1677cd7e0@syzkaller.appspotmail.com
Reported-by: Vadim Fedorenko <vfedorenko@novek.ru>
Fixes: 5271953cad ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're moving to netlink-only options, so add comments in the bridge's
sysfs files to warn against adding any new sysfs entries.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We decided to stop adding new sysfs bridge options and continue with
netlink only, so remove hosts limit sysfs support.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are use cases for which the existing tagger, based on the NPI
(Node Processor Interface) functionality, is insufficient.
Namely:
- Frames injected through the NPI port bypass the frame analyzer, so no
source address learning is performed, no TSN stream classification,
etc.
- Flow control is not functional over an NPI port (PAUSE frames are
encapsulated in the same Extraction Frame Header as all other frames)
- There can be at most one NPI port configured for an Ocelot switch. But
in NXP LS1028A and T1040 there are two Ethernet CPU ports. The non-NPI
port is currently either disabled, or operated as a plain user port
(albeit an internally-facing one). Having the ability to configure the
two CPU ports symmetrically could pave the way for e.g. creating a LAG
between them, to increase bandwidth seamlessly for the system.
So there is a desire to have an alternative to the NPI mode. This change
keeps the default tagger for the Seville and Felix switches as "ocelot",
but it can be changed via the following device attribute:
echo ocelot-8021q > /sys/class/<dsa-master>/dsa/tagging
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently DSA exposes the following sysfs:
$ cat /sys/class/net/eno2/dsa/tagging
ocelot
which is a read-only device attribute, introduced in the kernel as
commit 98cdb48071 ("net: dsa: Expose tagging protocol to user-space"),
and used by libpcap since its commit 993db3800d7d ("Add support for DSA
link-layer types").
It would be nice if we could extend this device attribute by making it
writable:
$ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
This is useful with DSA switches that can make use of more than one
tagging protocol. It may be useful in dsa_loop in the future too, to
perform offline testing of various taggers, or for changing between dsa
and edsa on Marvell switches, if that is desirable.
In terms of implementation, drivers can support this feature by
implementing .change_tag_protocol, which should always leave the switch
in a consistent state: either with the new protocol if things went well,
or with the old one if something failed. Teardown of the old protocol,
if necessary, must be handled by the driver.
Some things remain as before:
- The .get_tag_protocol is currently only called at probe time, to load
the initial tagging protocol driver. Nonetheless, new drivers should
report the tagging protocol in current use now.
- The driver should manage by itself the initial setup of tagging
protocol, no later than the .setup() method, as well as destroying
resources used by the last tagger in use, no earlier than the
.teardown() method.
For multi-switch DSA trees, error handling is a bit more complicated,
since e.g. the 5th out of 7 switches may fail to change the tag
protocol. When that happens, a revert to the original tag protocol is
attempted, but that may fail too, leaving the tree in an inconsistent
state despite each individual switch implementing .change_tag_protocol
transactionally. Since the intersection between drivers that implement
.change_tag_protocol and drivers that support D in DSA is currently the
empty set, the possibility for this error to happen is ignored for now.
Testing:
$ insmod mscc_felix.ko
[ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14
[ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517
$ insmod tag_ocelot.ko
$ rmmod mscc_felix.ko
$ insmod mscc_felix.ko
[ 97.261724] libphy: VSC9959 internal MDIO bus: probed
[ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0
[ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1
[ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2
[ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3
[ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode
[ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0
[ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode
[ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1
[ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode
[ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 98.527948] device eno2 entered promiscuous mode
[ 98.544755] DSA: tree 0 setup
$ ping 10.0.0.1
PING 10.0.0.1 (10.0.0.1): 56 data bytes
64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms
64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms
^C
- 10.0.0.1 ping statistics -
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.754/1.545/2.337 ms
$ cat /sys/class/net/eno2/dsa/tagging
ocelot
$ cat ./test_ocelot_8021q.sh
#!/bin/bash
ip link set swp0 down
ip link set swp1 down
ip link set swp2 down
ip link set swp3 down
ip link set swp5 down
ip link set eno2 down
echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
ip link set eno2 up
ip link set swp0 up
ip link set swp1 up
ip link set swp2 up
ip link set swp3 up
ip link set swp5 up
$ ./test_ocelot_8021q.sh
./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available
$ rmmod tag_ocelot.ko
rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable
$ insmod tag_ocelot_8021q.ko
$ ./test_ocelot_8021q.sh
$ cat /sys/class/net/eno2/dsa/tagging
ocelot-8021q
$ rmmod tag_ocelot.ko
$ rmmod tag_ocelot_8021q.ko
rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable
$ ping 10.0.0.1
PING 10.0.0.1 (10.0.0.1): 56 data bytes
64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms
64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms
64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms
$ rmmod mscc_felix.ko
[ 645.544426] mscc_felix 0000:00:00.5: Link is Down
[ 645.838608] DSA: tree 0 torn down
$ rmmod tag_ocelot_8021q.ko
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cascading DSA switches can be done multiple ways. There is the brute
force approach / tag stacking, where one upstream switch, located
between leaf switches and the host Ethernet controller, will just
happily transport the DSA header of those leaf switches as payload.
For this kind of setups, DSA works without any special kind of treatment
compared to a single switch - they just aren't aware of each other.
Then there's the approach where the upstream switch understands the tags
it transports from its leaves below, as it doesn't push a tag of its own,
but it routes based on the source port & switch id information present
in that tag (as opposed to DMAC & VID) and it strips the tag when
egressing a front-facing port. Currently only Marvell implements the
latter, and Marvell DSA trees contain only Marvell switches.
So it is safe to say that DSA trees already have a single tag protocol
shared by all switches, and in fact this is what makes the switches able
to understand each other. This fact is also implied by the fact that
currently, the tagging protocol is reported as part of a sysfs installed
on the DSA master and not per port, so it must be the same for all the
ports connected to that DSA master regardless of the switch that they
belong to.
It's time to make this official and enforce it (yes, this also means we
won't have any "switch understands tag to some extent but is not able to
speak it" hardware oddities that we'll support in the future).
This is needed due to the imminent introduction of the dsa_switch_ops::
change_tag_protocol driver API. When that is introduced, we'll have
to notify switches of the tagging protocol that they're configured to
use. Currently the tag_ops structure pointer is held only for CPU ports.
But there are switches which don't have CPU ports and nonetheless still
need to be configured. These would be Marvell leaf switches whose
upstream port is just a DSA link. How do we inform these of their
tagging protocol setup/deletion?
One answer to the above would be: iterate through the DSA switch tree's
ports once, list the CPU ports, get their tag_ops, then iterate again
now that we have it, and notify everybody of that tag_ops. But what to
do if conflicts appear between one cpu_dp->tag_ops and another? There's
no escaping the fact that conflict resolution needs to be done, so we
can be upfront about it.
Ease our work and just keep the master copy of the tag_ops inside the
struct dsa_switch_tree. Reference counting is now moved to be per-tree
too, instead of per-CPU port.
There are many places in the data path that access master->dsa_ptr->tag_ops
and we would introduce unnecessary performance penalty going through yet
another indirection, so keep those right where they are.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existence of dsa_broadcast has generated some confusion in the past:
https://www.mail-archive.com/netdev@vger.kernel.org/msg365042.html
So let's document the existing dsa_port_notify and dsa_broadcast
functions and explain when each of them should be used.
Also, in fact, the in-between function has always been there but was
lacking a name, and is the main reason for this patch: dsa_tree_notify.
Refactor dsa_broadcast to use it.
This patch also moves dsa_broadcast (a top-level function) to dsa2.c,
where it really belonged in the first place, but had no companion so it
stood with dsa_port_notify.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sja1105 implementation can be blind about this, but the felix driver
doesn't do exactly what it's being told, so it needs to know whether it
is a TX or an RX VLAN, so it can install the appropriate type of TCAM
rule.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use cache friendly helpers to better use cpu caches
while reading /proc/net/netstat
Tested on a platform with 256 threads (AMD Rome)
Before: 305 usec spent in netstat_seq_show()
After: 130 usec spent in netstat_seq_show()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210128162145.1703601-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 41b14fb872 ("net: Do not clear the sock TX queue in
sk_set_socket()") removes sk_tx_queue_clear() from sk_set_socket() and adds
it instead in sk_alloc() and sk_clone_lock() to fix an issue introduced in
the commit e022f0b4a0 ("net: Introduce sk_tx_queue_mapping"). On the
other hand, the original commit had already put sk_tx_queue_clear() in
sk_prot_alloc(): the callee of sk_alloc() and sk_clone_lock(). Thus
sk_tx_queue_clear() is called twice in each path.
If we remove sk_tx_queue_clear() in sk_alloc() and sk_clone_lock(), it
currently works well because (i) sk_tx_queue_mapping is defined between
sk_dontcopy_begin and sk_dontcopy_end, and (ii) sock_copy() called after
sk_prot_alloc() in sk_clone_lock() does not overwrite sk_tx_queue_mapping.
However, if we move sk_tx_queue_mapping out of the no copy area, it
introduces a bug unintentionally.
Therefore, this patch adds a compile-time check to take care of the order
of sock_copy() and sk_tx_queue_clear() and removes sk_tx_queue_clear() from
sk_prot_alloc() so that it does the only allocation and its callers
initialize fields.
CC: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20210128150217.6060-1-kuniyu@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is to add csum offload support for gre header:
On the TX path in gre_build_header(), when CHECKSUM_PARTIAL's set
for inner proto, it will calculate the csum for outer proto, and
inner csum will be offloaded later. Otherwise, CHECKSUM_PARTIAL
and csum_start/offset will be set for outer proto, and the outer
csum will be offloaded later.
On the GSO path in gre_gso_segment(), when CHECKSUM_PARTIAL is
not set for inner proto and the hardware supports csum offload,
CHECKSUM_PARTIAL and csum_start/offset will be set for outer
proto, and outer csum will be offloaded later. Otherwise, it
will do csum for outer proto by calling gso_make_checksum().
Note that SCTP has to do the csum by itself for non GSO path in
sctp_packet_pack(), as gre_build_header() can't handle the csum
with CHECKSUM_PARTIAL set for SCTP CRC csum offload.
v1->v2:
- remove the SCTP part, as GRE dev doesn't support SCTP CRC CSUM
and it will always do checksum for SCTP in sctp_packet_pack()
when it's not a GSO packet.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NETIF_F_IP|IPV6_CSUM feature flag indicates UDP and TCP csum offload
while NETIF_F_HW_CSUM feature flag indicates ip generic csum offload
for HW, which includes not only for TCP/UDP csum, but also for other
protocols' csum like GRE's.
However, in skb_csum_hwoffload_help() it only checks features against
NETIF_F_CSUM_MASK(NETIF_F_HW|IP|IPV6_CSUM). So if it's a non TCP/UDP
packet and the features doesn't support NETIF_F_HW_CSUM, but supports
NETIF_F_IP|IPV6_CSUM only, it would still return 0 and leave the HW
to do csum.
This patch is to support ip generic csum processing by checking
NETIF_F_HW_CSUM for all protocols, and check (NETIF_F_IP_CSUM |
NETIF_F_IPV6_CSUM) only for TCP and UDP.
Note that we're using skb->csum_offset to check if it's a TCP/UDP
proctol, this might be fragile. However, as Alex said, for now we
only have a few L4 protocols that are requesting Tx csum offload,
we'd better fix this until a new protocol comes with a same csum
offset.
v1->v2:
- not extend skb->csum_not_inet, but use skb->csum_offset to tell
if it's an UDP/TCP csum packet.
v2->v3:
- add a note in the changelog, as Willem suggested.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This converts the driver to use the new tasklet API introduced in
commit 12cc923f1c ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20210127173256.13954-2-kernel@esmil.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously a temporary tasklet structure was initialized on the stack
using DECLARE_TASKLET_OLD() and then copied over and modified. Nothing
else in the kernel seems to use this pattern, so let's just call
tasklet_init() like everyone else.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20210127173256.13954-1-kernel@esmil.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Give offloading drivers the direction of the offloaded ct flow,
this will be used for matches on direction (ct_state +/-rpl).
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's better make 'pkt_sk()' inline here, as non-inline function
shouldn't occur in headers. Besides, this function is simple
enough to be inline.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Link: https://lore.kernel.org/r/20210127123302.29842-1-dong.menglong@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices,
completely drop from the bus on a system-suspend. These devices will
have their driver unbound and rebound on resume (when the dropping of
the bus gets detected) and will show up as a new HCI after resume.
These devices do not benefit from the suspend / resume handling work done
by the hci_suspend_notifier. At best this unnecessarily adds some time to
the suspend/resume time. But this may also actually cause problems, if the
code doing the driver unbinding runs after the pm-notifier then the
hci_suspend_notifier code will try to talk to a device which is now in
an uninitialized state.
This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows
drivers to opt-out of the hci_suspend_notifier when they know beforehand
that their device will be fully re-initialized / reprobed on resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Validation of messages for get / del of a next hop is the same as will be
validation of messages for get of a resilient next hop group bucket. The
difference is that policy for resilient next hop group buckets is a
superset of that used for next-hop get.
It is therefore possible to reuse the code that validates the nhmsg fields,
extracts the next-hop ID, and validates that. To that end, extract from
nh_valid_get_del_req() a helper __nh_valid_get_del_req() that does just
that.
Make the nlh argument const so that the function can be called from the
dump context, which only has a const nlh. Propagate the constness to
nh_valid_get_del_req().
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to allow different handling for next-hop tree dumper and for
bucket dumper, parameterize the next-hop tree walker with a callback. Add
rtm_dump_nexthop_cb() with just the bits relevant for next-hop tree
dumping.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract from rtm_dump_nexthop() a helper to walk the next hop tree. A
separate function for this will be reusable from the bucket dumper.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dump operations need to keep state from one invocation to another. A
scratch area is dedicated for this purpose in the passed-in argument, cb,
namely via two aliased arrays, struct netlink_callback.args and .ctx.
Dumping of buckets will end up having to iterate over next hops as well,
and it would be nice to be able to reuse the iteration logic with the NH
dumper. The fact that the logic currently relies on fixed index to the
.args array, and the indices would have to be coordinated between the two
dumpers, makes this somewhat awkward.
To make the access patters clearer, introduce a helper struct with a NH
index, and instead of using the .args array directly, use it through this
structure.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Requests to dump nexthops have many attributes in common with those that
requests to dump buckets of resilient NH groups will have. However, they
have different policies. To allow reuse of this code, extract a
policy-agnostic wrapper out of nh_valid_dump_req(), and convert this
function into a thin wrapper around it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Requests to dump nexthops have many attributes in common with those that
requests to dump buckets of resilient NH groups will have. In order to make
reuse of this code simpler, convert the code to use a single structure with
filtering configuration instead of passing around the parameters one by
one.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After there are several next-hop group types, initialization and
finalization of notifier type needs to reflect the actual type. Transform
nh_notifier_grp_info_init() and _fini() to make extending them easier.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently there are only two types of in-kernel nexthop notification.
The two are distinguished by the 'is_grp' boolean field in 'struct
nh_notifier_info'.
As more notification types are introduced for more next-hop group types, a
boolean is not an easily extensible interface. Instead, convert it to an
enum.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the code that deals with nexthop groups relies on the fact that the
group is of exactly one well-known type. Currently there is only one type,
"mpath", but as more next-hop group types come, it becomes desirable to
have a central place where the setting is validated. Introduce such place
into nexthop_create_group(), such that the check is done before the code
that relies on that invariant is invoked.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The values that a next-hop group needs to keep track of depend on the group
type. Introduce a union to separate fields specific to the mpath groups
from fields specific to other group types.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The logic for selecting path depends on the next-hop group type. Adapt the
nexthop_select_path() to dispatch according to the group type.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nexthop_free_mpath really should be nexthop_free_group. Rename it.
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TX path no longer falls apart when some of its SG skbs are later
linearized by lower layers of the stack. So enable the use of SG skbs
in iucv_sock_sendmsg() again.
This effectively reverts
commit dc5367bcc5 ("net/af_iucv: don't use paged skbs for TX on HiperSockets").
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stop maintaining the skb_send_q list for TRANS_HIPER sockets.
Not only is it extra overhead, but keeping around a list of skb clones
means that we later also have to match the ->sk_txnotify() calls
against these clones and free them accordingly.
The current matching logic (comparing the skbs' shinfo location) is
frustratingly fragile, and breaks if the skb's head is mangled in any
sort of way while passing from dev_queue_xmit() to the device's
HW queue.
Also adjust the interface for ->sk_txnotify(), to make clear that we
don't actually care about any skb internals.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TX code keeps track of all skbs that are in-flight but haven't
actually been sent out yet. For native IUCV sockets that's not a huge
deal, but with TRANS_HIPER sockets it would be much better if we
didn't need to maintain a list of skb clones.
Note that we actually only care about the _count_ of skbs in this stage
of the TX pipeline. So as prep work for removing the skb tracking on
TRANS_HIPER sockets, keep track of the skb count in a separate variable
and pair any list {enqueue, unlink} with a count {increment, decrement}.
Then replace all occurences where we currently look at the skb list's
fill level.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whoever called iucv_sk(sk)->sk_txnotify() must already know that they're
dealing with an af_iucv socket.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/can/dev.c
b552766c87 ("can: dev: prevent potential information leak in can_fill_info()")
3e77f70e73 ("can: dev: move driver related infrastructure into separate subdir")
0a042c6ec9 ("can: dev: move netlink related code into seperate file")
Code move.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
57ac4a31c4 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down")
214baf2287 ("net/mlx5e: Support HTB offload")
Adjacent code changes
net/switchdev/switchdev.c
20776b465c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP")
ffb68fc58e ("net: switchdev: remove the transaction structure from port object notifiers")
bae33f2b5a ("net: switchdev: remove the transaction structure from port attributes")
Transaction parameter gets dropped otherwise keep the fix.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Those hooks run as BPF_CGROUP_RUN_SA_PROG_LOCK and operate on a locked socket.
Note that we could remove the switch for prog->expected_attach_type altogether
since all current sock_addr attach types are covered. However, it makes sense
to keep it as a safe-guard in case new sock_addr attach types are added that
might not operate on a locked socket. Therefore, avoid to let this slip through.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210127232853.3753823-5-sdf@google.com
Can be used to query/modify socket state for unconnected UDP sendmsg.
Those hooks run as BPF_CGROUP_RUN_SA_PROG_LOCK and operate on
a locked socket.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210127232853.3753823-2-sdf@google.com
Parav Pandit Says:
=================
This patchset introduces support for mlx5 subfunction (SF).
A subfunction is a lightweight function that has a parent PCI function on
which it is deployed. mlx5 subfunction has its own function capabilities
and its own resources. This means a subfunction has its own dedicated
queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from
the parent PCI function.
When subfunction is RDMA capable, it has its own QP1, GID table and rdma
resources neither shared nor stolen from the parent PCI function.
A subfunction has dedicated window in PCI BAR space that is not shared
with the other subfunctions or parent PCI function. This ensures that all
class devices of the subfunction accesses only assigned PCI BAR space.
A Subfunction supports eswitch representation through which it supports tc
offloads. User must configure eswitch to send/receive packets from/to
subfunction port.
Subfunctions share PCI level resources such as PCI MSI-X IRQs with
their other subfunctions and/or with its parent PCI function.
Patch summary:
--------------
Patch 1 to 4 prepares devlink
patch 5 to 7 mlx5 adds SF device support
Patch 8 to 11 mlx5 adds SF devlink port support
Patch 12 and 14 adds documentation
Patch-1 prepares code to handle multiple port function attributes
Patch-2 introduces devlink pcisf port flavour similar to pcipf and pcivf
Patch-3 adds port add and delete driver callbacks
Patch-4 adds port function state get and set callbacks
Patch-5 mlx5 vhca event notifier support to distribute subfunction
state change notification
Patch-6 adds SF auxiliary device
Patch-7 adds SF auxiliary driver
Patch-8 prepares eswitch to handler SF vport
Patch-9 adds eswitch helpers to add/remove SF vport
Patch-10 implements devlink port add/del callbacks
Patch-11 implements devlink port function get/set callbacks
Patch-12 to 14 adds documentation
Patch-12 added mlx5 port function documentation
Patch-13 adds subfunction documentation
Patch-14 adds mlx5 subfunction documentation
Subfunction support is discussed in detail in RFC [1] and [2].
RFC [1] and extension [2] describes requirements, design and proposed
plumbing using devlink, auxiliary bus and sysfs for systemd/udev
support. Functionality of this patchset is best explained using real
examples further below.
overview:
--------
A subfunction can be created and deleted by a user using devlink port
add/delete interface.
A subfunction can be configured using devlink port function attribute
before its activated.
When a subfunction is activated, it results in an auxiliary device on
the host PCI device where it is deployed. A driver binds to the
auxiliary device that further creates supported class devices.
example subfunction usage sequence:
-----------------------------------
Change device to switchdev mode:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Add a devlink port of subfunction flavour:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
Configure mac address of the port function:
$ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88
Now activate the function:
$ devlink port function set ens2f0npf0sf88 state active
Now use the auxiliary device and class devices:
$ devlink dev show
pci/0000:06:00.0
auxiliary/mlx5_core.sf.4
$ ip link show
127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff
altname enp6s0f0np0
129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff
$ rdma dev show
43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112
44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112
After use inactivate the function:
$ devlink port function set ens2f0npf0sf88 state inactive
Now delete the subfunction port:
$ devlink port del ens2f0npf0sf88
[1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/
[2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2
=================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmALKDwACgkQSD+KveBX
+j7qjQf6A1moPhhIlXROCzaJUjlAj2U291LWBveU+I6na6fjYjAAWHYwfv0YKQpo
Qb0NRt+9abgEpGidc4hOwIJKhK+vlWrQuehRt83aAfAwaN3OEeGuNllniWo821Hj
sNiJfSC/DslOlQSxKLsAs3Fduy/sV3GN9Zv7hEwOFgEr5QvB2c6H1XiypVP2Ecsd
ZXC3SuEWxIoRtfXEkTkJne9LNoiDChlvT1FR/z75h8HUBdAOjzBTQzBbM+8M4Msw
8aKUPya3FMRAPWsOgPhkpU0xTtH2Mi7MC9TlwiWmrK4Q3uvesIav8pVf7r3GNAZA
sipIZ4gP0M5SiCaZa8rIBpTXBHxmvg==
=jEG4
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 subfunction support
Parav Pandit says:
This patchset introduces support for mlx5 subfunction (SF).
A subfunction is a lightweight function that has a parent PCI function on
which it is deployed. mlx5 subfunction has its own function capabilities
and its own resources. This means a subfunction has its own dedicated
queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from
the parent PCI function.
When subfunction is RDMA capable, it has its own QP1, GID table and rdma
resources neither shared nor stolen from the parent PCI function.
A subfunction has dedicated window in PCI BAR space that is not shared
with the other subfunctions or parent PCI function. This ensures that all
class devices of the subfunction accesses only assigned PCI BAR space.
A Subfunction supports eswitch representation through which it supports tc
offloads. User must configure eswitch to send/receive packets from/to
subfunction port.
Subfunctions share PCI level resources such as PCI MSI-X IRQs with
their other subfunctions and/or with its parent PCI function.
Subfunction support is discussed in detail in RFC [1] and [2].
RFC [1] and extension [2] describes requirements, design and proposed
plumbing using devlink, auxiliary bus and sysfs for systemd/udev
support. Functionality of this patchset is best explained using real
examples further below.
overview:
--------
A subfunction can be created and deleted by a user using devlink port
add/delete interface.
A subfunction can be configured using devlink port function attribute
before its activated.
When a subfunction is activated, it results in an auxiliary device on
the host PCI device where it is deployed. A driver binds to the
auxiliary device that further creates supported class devices.
example subfunction usage sequence:
-----------------------------------
Change device to switchdev mode:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Add a devlink port of subfunction flavour:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
Configure mac address of the port function:
$ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88
Now activate the function:
$ devlink port function set ens2f0npf0sf88 state active
Now use the auxiliary device and class devices:
$ devlink dev show
pci/0000:06:00.0
auxiliary/mlx5_core.sf.4
$ ip link show
127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff
altname enp6s0f0np0
129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff
$ rdma dev show
43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112
44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112
After use inactivate the function:
$ devlink port function set ens2f0npf0sf88 state inactive
Now delete the subfunction port:
$ devlink port del ens2f0npf0sf88
[1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/
[2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2
=================
* tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Add devlink subfunction port documentation
devlink: Extend devlink port documentation for subfunctions
devlink: Add devlink port documentation
net/mlx5: SF, Port function state change support
net/mlx5: SF, Add port add delete functionality
net/mlx5: E-switch, Add eswitch helpers for SF vport
net/mlx5: E-switch, Prepare eswitch to handle SF vport
net/mlx5: SF, Add auxiliary device driver
net/mlx5: SF, Add auxiliary device support
net/mlx5: Introduce vhca state event notifier
devlink: Support get and set state of port function
devlink: Support add and delete devlink port
devlink: Introduce PCI SF port flavour and port attribute
devlink: Prepare code to fill multiple port function attributes
====================
Link: https://lore.kernel.org/r/20210122193658.282884-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireless-drivers and netfilter trees. Nothing scary, Intel WiFi-related
fixes seemed most notable to the users.
Current release - regressions:
- dsa: microchip: ksz8795: fix KSZ8794 port map again to program
the CPU port correctly
Current release - new code bugs:
- iwlwifi: pcie: reschedule in long-running memory reads
Previous releases - regressions:
- iwlwifi: dbg: don't try to overwrite read-only FW data
- iwlwifi: provide gso_type to GSO packets
- octeontx2: make sure the buffer is 128 byte aligned
- tcp: make TCP_USER_TIMEOUT accurate for zero window probes
- xfrm: fix wraparound in xfrm_policy_addr_delta()
- xfrm: fix oops in xfrm_replay_advance_bmp due to a race between CPUs
in presence of packet reorder
- tcp: fix TLP timer not set when CA_STATE changes from DISORDER
to OPEN
- wext: fix NULL-ptr-dereference with cfg80211's lack of commit()
Previous releases - always broken:
- igc: fix link speed advertising
- stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
- team: protect features update by RCU to avoid deadlock
- xfrm: fix disable_xfrm sysctl when used on xfrm interfaces themselves
- fec: fix temporary RMII clock reset on link up
- can: dev: prevent potential information leak in can_fill_info()
Misc:
- mrp: fix bad packing of MRP test packet structures
- uapi: fix big endian definition of ipv6_rpl_sr_hdr
- add David Ahern to IPv4/IPv6 maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dwFD
-----END PGP SIGNATURE-----
Merge tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes including fixes from can, xfrm, wireless,
wireless-drivers and netfilter trees. Nothing scary, Intel
WiFi-related fixes seemed most notable to the users.
Current release - regressions:
- dsa: microchip: ksz8795: fix KSZ8794 port map again to program the
CPU port correctly
Current release - new code bugs:
- iwlwifi: pcie: reschedule in long-running memory reads
Previous releases - regressions:
- iwlwifi: dbg: don't try to overwrite read-only FW data
- iwlwifi: provide gso_type to GSO packets
- octeontx2: make sure the buffer is 128 byte aligned
- tcp: make TCP_USER_TIMEOUT accurate for zero window probes
- xfrm: fix wraparound in xfrm_policy_addr_delta()
- xfrm: fix oops in xfrm_replay_advance_bmp due to a race between
CPUs in presence of packet reorder
- tcp: fix TLP timer not set when CA_STATE changes from DISORDER to
OPEN
- wext: fix NULL-ptr-dereference with cfg80211's lack of commit()
Previous releases - always broken:
- igc: fix link speed advertising
- stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA
addressing
- team: protect features update by RCU to avoid deadlock
- xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
themselves
- fec: fix temporary RMII clock reset on link up
- can: dev: prevent potential information leak in can_fill_info()
Misc:
- mrp: fix bad packing of MRP test packet structures
- uapi: fix big endian definition of ipv6_rpl_sr_hdr
- add David Ahern to IPv4/IPv6 maintainers"
* tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
rxrpc: Fix memory leak in rxrpc_lookup_local
mlxsw: spectrum_span: Do not overwrite policer configuration
selftests: forwarding: Specify interface when invoking mausezahn
stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.
ibmvnic: Ensure that CRQ entry read are correctly ordered
MAINTAINERS: add missing header for bonding
net: decnet: fix netdev refcount leaking on error path
net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
can: dev: prevent potential information leak in can_fill_info()
net: fec: Fix temporary RMII clock reset on link up
net: lapb: Add locking to the lapb module
team: protect features update by RCU to avoid deadlock
MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers
net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
net/mlx5e: Revert parameters on errors when changing trust state without reset
net/mlx5e: Correctly handle changing the number of queues when the interface is down
net/mlx5e: Fix CT rule + encap slow path offload and deletion
net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
...
When CONFIG_ATH9K is built-in but LED support is in a loadable
module, both ath9k drivers fails to link:
x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_deinit_leds':
gpio.c:(.text+0x36): undefined reference to `led_classdev_unregister'
x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_init_leds':
gpio.c:(.text+0x179): undefined reference to `led_classdev_register_ext'
The problem is that the 'imply' keyword does not enforce any dependency
but is only a weak hint to Kconfig to enable another symbol from a
defconfig file.
Change imply to a 'depends on LEDS_CLASS' that prevents the incorrect
configuration but still allows building the driver without LED support.
The 'select MAC80211_LEDS' is now ensures that the LED support is
actually used if it is present, and the added Kconfig dependency
on MAC80211_LEDS ensures that it cannot be enabled manually when it
has no effect.
Fixes: 197f466e93 ("ath9k_htc: Do not select MAC80211_LEDS by default")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210125113654.2408057-1-arnd@kernel.org
Add packet trap that can report packets that were dropped due to
destination MAC filtering.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* many minstrel improvements, including removal of the old
minstrel in favour of minstrel_ht
* speed improvements on FQ
* support for RX decapsulation (header conversion) offload
* RTNL reduction: limit RTNL usage in the wireless stack
mostly to where really needed (regulatory not yet) to
reduce contention on it
* various other small updates
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmAR1hoACgkQB8qZga/f
l8QPVRAAjbF502gkrM2+VjC31xNrSVtAXn5LIsTHUUee1Kwhhe7VHNqrSYtR+poQ
jdtBaaszlnkbBqThvIqD6AvbJgUeFhDB9Jcyynhbaq3wPcDiu7IuJikBzkN2Mhyq
bzKu46jFPG6l31ItCKF9mToujlmcJrJVoS5mWJEi3QIWc9B3dwPsznO57tCVznmU
95zkhs6tSwgk9ENpDoulXxvpsnlnIzo8f1z0Lr4h9TbzvwzTEA2+by0hmnBk/vZN
wjBJXNVMlimp+lmgVms/gQfuGG6NHtmtatqsu+iKCRbO5AjOlvvql2pjkf5yNZXP
GD2LkOcM3DiNP1Mf3pP31du1cFBo7nq+P1/ChekmY1A6/xV3GXFsKofGDCSONu1n
E5+X+6MFt1gGHAwh8yxmg2HUjpuq6fApnx656HqlYluXqeCRR0hcv0iJ3j9ApAVJ
Qwn6cP1rjCXXHsbOdGQi/Vx0xmUjEzNw3+j9x5nC5+zM82joRKxFMqZA8revxRUj
gjkiu6EC4ZWWBzTXY9+qITSgEO8b1y7emBgdKSAQplWDAQnaa8nPGBdQ7QmwPdpV
vOSZ6Dd4dMKh8Qk7FWPHxYZJKoDz+i0a8g1m9CogC3TO8hNLRt6D37ffTdoOag2m
648kFBBS4SghKAjH6P4Nf6cfAPHpX/afivnSTpRK691cZ+2pajc=
=gIbl
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
More updates:
* many minstrel improvements, including removal of the old
minstrel in favour of minstrel_ht
* speed improvements on FQ
* support for RX decapsulation (header conversion) offload
* RTNL reduction: limit RTNL usage in the wireless stack
mostly to where really needed (regulatory not yet) to
reduce contention on it
* tag 'mac80211-next-for-net-next-2021-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (24 commits)
mac80211: minstrel_ht: fix regression in the max_prob_rate fix
virt_wifi: fix deadlock on RTNL
cfg80211: avoid holding the RTNL when calling the driver
cfg80211: change netdev registration/unregistration semantics
mac80211: minstrel_ht: fix rounding error in throughput calculation
mac80211: minstrel_ht: increase stats update interval
mac80211: minstrel_ht: fix max probability rate selection
mac80211: minstrel_ht: improve sample rate selection
mac80211: minstrel_ht: improve ampdu length estimation
mac80211: minstrel_ht: remove old ewma based rate average code
mac80211: remove legacy minstrel rate control
mac80211: minstrel_ht: add support for OFDM rates on non-HT clients
mac80211: minstrel_ht: clean up CCK code
mac80211: introduce aql_enable node in debugfs
cfg80211: Add phyrate conversion support for extended MCS in 60GHz band
cfg80211: add VHT rate entries for MCS-10 and MCS-11
mac80211: reduce peer HE MCS/NSS to own capabilities
mac80211: remove NSS number of 160MHz if not support 160MHz for HE
mac80211_hwsim: add 6GHz channels
mac80211: add LDPC encoding to ieee80211_parse_tx_radiotap
...
====================
Link: https://lore.kernel.org/r/20210127210915.135550-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmARLD8THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqdlXB/48nQ5I+Z1wnhPvbtvyH4tk9XSbJaTt
4HH+i3R5RUAzHcOmfm2PQHe9/DxiogOQAFv9Lo0t7HN449bM3LMHrhTCcJIrIRf9
VxFSk4H97wjHR0Zj6TlEe++CTUPUalCpkCluERwqYP9WXRRklXL1mju+WNKnMMl0
9fl4CvQDWjB2wNXXoZ1SVuoFxyeqiKQHJy9n3Wez8sQTIlguOZvm8glDQlyb4v+q
rSxpCUrlpOVv6/11NqxQ7CfGdfTgLUi1a4greriwf1PjEXvDArXMjpDG3bo0kbgy
7Iv0U9GsvtzOPB+6XKxEFeYTKFaixyLugYBAadfvs0lVEIFP1mtlYvQs
=pHI/
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.12-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2021-01-27
The first two patches are by me and fix typos on the CAN gw protocol and the
flexcan driver.
The next patch is by Vincent Mailhol and targets the CAN driver infrastructure,
it exports the function that converts the CAN state into a human readable
string.
A patch by me, which target the CAN driver infrastructure, too, makes the
calculation in can_fd_len2dlc() more readable.
A patch by Tom Rix fixes a checkpatch warning in the mcba_usb driver.
The next seven patches target the mcp251xfd driver. Su Yanjun's patch replaces
several hardcoded assumptions when calling regmap, by using
regmap_get_val_bytes(). The remaining patches are by me. First an open coded
check is replaced by an existing helper function, then in the TX path the
padding for CAN-FD frames is cleaned up. The next two patches clean up the RTR
frame handling in the RX and TX path. Then support for len8_dlc is added. The
last patch adds BQL support.
* tag 'linux-can-next-for-5.12-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: mcp251xfd: add BQL support
can: mcp251xfd: add len8_dlc support
can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): don't copy data for RTR CAN frames in TX-path
can: mcp251xfd: mcp251xfd_hw_rx_obj_to_skb(): don't copy data for RTR CAN frames in RX-path
can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD frames
can: mcp251xfd: mcp251xfd_start_xmit(): use mcp251xfd_get_tx_free() to check TX is is full
can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap
can: mcba_usb: remove h from printk format specifier
can: length: can_fd_len2dlc(): make legnth calculation readable again
can: dev: export can_get_state_str() function
can: flexcan: fix typos
can: gw: fix typo
====================
Link: https://lore.kernel.org/r/20210127092227.2775573-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove a duplicate code checking for header size in tipc_msg_create() as
it's already being done in tipc_msg_init().
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20210127025123.6390-1-hoang.h.le@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the moment, BPF_CGROUP_INET{4,6}_BIND hooks can rewrite user_port
to the privileged ones (< ip_unprivileged_port_start), but it will
be rejected later on in the __inet_bind or __inet6_bind.
Let's add another return value to indicate that CAP_NET_BIND_SERVICE
check should be ignored. Use the same idea as we currently use
in cgroup/egress where bit #1 indicates CN. Instead, for
cgroup/bind{4,6}, bit #1 indicates that CAP_NET_BIND_SERVICE should
be bypassed.
v5:
- rename flags to be less confusing (Andrey Ignatov)
- rework BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY to work on flags
and accept BPF_RET_SET_CN (no behavioral changes)
v4:
- Add missing IPv6 support (Martin KaFai Lau)
v3:
- Update description (Martin KaFai Lau)
- Fix capability restore in selftest (Martin KaFai Lau)
v2:
- Switch to explicit return code (Martin KaFai Lau)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20210127193140.3170382-1-sdf@google.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Honor stateful expressions defined in the set from the dynset
extension. The set definition provides a stateful expression
that must be used by the dynset expression in case it is specified.
2) Missing timeout extension in the set element in the dynset
extension leads to inconsistent ruleset listing, not allowing
the user to restore timeout and expiration on ruleset reload.
3) Do not dump the stateful expression from the dynset extension
if it coming from the set definition.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nft_dynset: dump expressions when set definition contains no expressions
netfilter: nft_dynset: add timeout extension to template
netfilter: nft_dynset: honor stateful expressions in set definition
====================
Link: https://lore.kernel.org/r/20210127132512.5472-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two new port attributes which make EHT hosts limit configurable and
export the current number of tracked EHT hosts:
- IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT: configure/retrieve current limit
- IFLA_BRPORT_MCAST_EHT_HOSTS_CNT: current number of tracked hosts
Setting IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT to 0 is currently not allowed.
Note that we have to increase RTNL_SLAVE_MAX_TYPE to 38 minimum, I've
increased it to 40 to have space for two more future entries.
v2: move br_multicast_eht_set_hosts_limit() to br_multicast_eht.c,
no functional change
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a default limit of 512 for number of tracked EHT hosts per-port.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On building the route there is an assumption that the destination
could be local. In this case loopback_dev is used to get the address.
If the address is still cannot be retrieved dn_route_output_slow
returns EADDRNOTAVAIL with loopback_dev reference taken.
Cannot find hash for the fixes tag because this code was introduced
long time ago. I don't think that this bug has ever fired but the
patch is done just to have a consistent code base.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1611619334-20955-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These Kconfig files are included from net/Kconfig, inside the
if NET ... endif.
Remove 'depends on NET', which we know it is already met.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CONFIG_NET_L3_MASTER_DEV is a bool option. Change the ifeq conditional
to the standard obj-$(CONFIG_NET_L3_MASTER_DEV) form.
Use obj-y in net/l3mdev/Makefile because Kbuild visits this Makefile
only when CONFIG_NET_L3_MASTER_DEV=y.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210125231659.106201-4-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CONFIG_NET_SWITCHDEV is a bool option. Change the ifeq conditional to
the standard obj-$(CONFIG_NET_SWITCHDEV) form.
Use obj-y in net/switchdev/Makefile because Kbuild visits this Makefile
only when CONFIG_NET_SWITCHDEV=y.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125231659.106201-3-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CONFIG_DCB is a bool option. Change the ifeq conditional to the
standard obj-$(CONFIG_DCB) form.
Use obj-y in net/dcb/Makefile because Kbuild visits this Makefile
only when CONFIG_DCB=y.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125231659.106201-2-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_NET is disabled, nothing under the net/ directory is
compiled. Move the CONFIG_NET guard to the top Makefile so the net/
directory is entirely skipped.
When Kbuild visits net/Makefile, CONFIG_NET is obvioulsy 'y' because
CONFIG_NET is a bool option. Clean up net/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125231659.106201-1-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CONFIG_NET is a bool option, and this file is compiled only when
CONFIG_NET=y.
Remove #ifdef CONFIG_NET, which we know it is always met.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125231421.105936-1-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid confusions like when working on the previous patch, better to
declare and assign this variable only where it is needed.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On one side, we can allow the creation of subflows between v4 mapped in
v6 and v4 addresses. For that we look for v4mapped addresses between the
local address we want to select and the remote one.
On the other side, we also properly deal with received v4mapped
addresses, either announced ones or set via Netlink.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/122
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With an IPv4 mapped in v6 socket, we were trying to call inet6_bind()
with an IPv4 address resulting in a -EINVAL error because the given
addr_len -- size of the address structure -- was too short.
We now make sure to use address structures for the same family as the
MPTCP socket for both the bind() and the connect(). It means we convert
v4 addresses to v4 mapped in v6 or the opposite if needed.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/122
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pktgen create threads for all online cpus and bond these threads to
relevant cpu repecivtily. when this thread firstly be woken up, it
will compare cpu currently running with the cpu specified at the time
of creation and if the two cpus are not equal, BUG_ON() will take effect
causing panic on the system.
Notice that these threads could be migrated to other cpus before start
running because of the cpu hotplug after these threads have created. so the
BUG_ON() used here seems unreasonable and we can replace it with WARN_ON()
to just printf a warning other than panic the system.
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Link: https://lore.kernel.org/r/20210125124229.19334-1-zhudi21@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's not true that switchdev_port_obj_notify() only inspects the
->handled field of "struct switchdev_notifier_port_obj_info" if
call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON()
triggering for a non-zero return combined with ->handled not being
true. But the real problem here is that -EOPNOTSUPP is not being
properly handled.
The wrapper functions switchdev_handle_port_obj_add() et al change a
return value of -EOPNOTSUPP to 0, and the treatment of ->handled in
switchdev_port_obj_notify() seems to be designed to change that back
to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e.,
everybody returned -EOPNOTSUPP).
Currently, as soon as some device down the stack passes the check_cb()
check, ->handled gets set to true, which means that
switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP.
This, for example, means that the detection of hardware offload
support in the MRP code is broken: switchdev_port_obj_add() used by
br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP
code thinks the generation of MRP test frames has been offloaded, no
such frames are actually put on the wire. Similarly,
br_mrp_switchdev_set_ring_role() also always returns 0, causing
mrp->ring_role_offloaded to be set to 1.
To fix this, continue to set ->handled true if any callback returns
success or any error distinct from -EOPNOTSUPP. But if all the
callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so
the logic in switchdev_port_obj_notify() can propagate that
information.
Fixes: 9a9f26e8f7 ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes: f30f0601eb ("switchdev: Add helpers to aid traversal through lower devices")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20210125124116.102928-1-rasmus.villemoes@prevas.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_psock_destroy() is a RCU callback, I can't see any reason why
it could be used outside.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210127221501.46866-1-xiyou.wangcong@gmail.com
This new function combines the netlink register attribute parser
and the store validation function.
This update requires to replace:
enum nft_registers dreg:8;
in many of the expression private areas otherwise compiler complains
with:
error: cannot take address of bit-field ‘dreg’
when passing the register field as reference.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This new function combines the netlink register attribute parser
and the load validation function.
This update requires to replace:
enum nft_registers sreg:8;
in many of the expression private areas otherwise compiler complains
with:
error: cannot take address of bit-field ‘sreg’
when passing the register field as reference.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since mi->max_prob_rate is overwritten after the loop that calls
minstrel_ht_set_best_prob_rate, the new best rate needs to be written to *dest
Fixes: a7fca4e403 ("mac80211: minstrel_ht: fix max probability rate selection")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210126154409.6755-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix the following coccicheck warnings:
./net/ipv4/esp4_offload.c:288:32-34: WARNING !A || A && B is
equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
For IPv4, default route is learned via DHCPv4 and user is allowed to change
metric using config etc/network/interfaces. But for IPv6, default route can
be learned via RA, for which, currently a fixed metric value 1024 is used.
Ideally, user should be able to configure metric on default route for IPv6
similar to IPv4. This patch adds sysctl for the same.
Logs:
For IPv4:
Config in etc/network/interfaces:
auto eth0
iface eth0 inet dhcp
metric 4261413864
IPv4 Kernel Route Table:
$ ip route list
default via 172.21.47.1 dev eth0 metric 4261413864
FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over DHCPv4 default route.]
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
> - selected route, * - FIB route
S>* 0.0.0.0/0 [20/0] is directly connected, eth0, 00:00:03
K 0.0.0.0/0 [254/1000] via 172.21.47.1, eth0, 6d08h51m
i.e. User can prefer Default Router learned via Routing Protocol in IPv4.
Similar behavior is not possible for IPv6, without this fix.
After fix [for IPv6]:
sudo sysctl -w net.ipv6.conf.eth0.net.ipv6.conf.eth0.ra_defrtr_metric=1996489705
IP monitor: [When IPv6 RA is received]
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 pref high
Kernel IPv6 routing table
$ ip -6 route list
default via fe80::be16:65ff:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 21sec hoplimit 64 pref high
FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over IPv6 RA default route.]
Codes: K - kernel route, C - connected, S - static, R - RIPng,
O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table,
v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
> - selected route, * - FIB route
S>* ::/0 [20/0] is directly connected, eth0, 00:00:06
K ::/0 [119/1001] via fe80::xx16:xxxx:feb3:ce8e, eth0, 6d07h43m
If the metric is changed later, the effect will be seen only when next IPv6
RA is received, because the default route must be fully controlled by RA msg.
Below metric is changed from 1996489705 to 1996489704.
$ sudo sysctl -w net.ipv6.conf.eth0.ra_defrtr_metric=1996489704
net.ipv6.conf.eth0.ra_defrtr_metric = 1996489704
IP monitor:
[On next IPv6 RA msg, Kernel deletes prev route and installs new route with updated metric]
Deleted default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 3sec hoplimit 64 pref high
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489704 pref high
Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210125214430.24079-1-pchaudhary@linkedin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the lapb module, the timers may run concurrently with other code in
this module, and there is currently no locking to prevent the code from
racing on "struct lapb_cb". This patch adds locking to prevent racing.
1. Add "spinlock_t lock" to "struct lapb_cb"; Add "spin_lock_bh" and
"spin_unlock_bh" to APIs, timer functions and notifier functions.
2. Add "bool t1timer_stop, t2timer_stop" to "struct lapb_cb" to make us
able to ask running timers to abort; Modify "lapb_stop_t1timer" and
"lapb_stop_t2timer" to make them able to abort running timers;
Modify "lapb_t2timer_expiry" and "lapb_t1timer_expiry" to make them
abort after they are stopped by "lapb_stop_t1timer", "lapb_stop_t2timer",
and "lapb_start_t1timer", "lapb_start_t2timer".
3. Let lapb_unregister wait for other API functions and running timers
to stop.
4. The lapb_device_event function calls lapb_disconnect_request. In
order to avoid trying to hold the lock twice, add a new function named
"__lapb_disconnect_request" which assumes the lock is held, and make
it called by lapb_disconnect_request and lapb_device_event.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20210126040939.69995-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the messed up indentation in br_multicast_eht_set_entry_lookup().
Fixes: baa74d39ca ("net: bridge: multicast: add EHT source set handling functions")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210125082040.13022-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* fix 160 MHz channel switch in mac80211
* fix a staging driver to not deadlock due to some
recent cfg80211 changes
* fix NULL-ptr deref if cfg80211 returns -EINPROGRESS
to wext (syzbot)
* pause TX in mac80211 in type change to prevent crashes
(syzbot)
-----BEGIN PGP SIGNATURE-----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=g3wj
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple of fixes:
* fix 160 MHz channel switch in mac80211
* fix a staging driver to not deadlock due to some
recent cfg80211 changes
* fix NULL-ptr deref if cfg80211 returns -EINPROGRESS
to wext (syzbot)
* pause TX in mac80211 in type change to prevent crashes
(syzbot)
* tag 'mac80211-for-net-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
staging: rtl8723bs: fix wireless regulatory API misuse
mac80211: pause TX while changing interface type
wext: fix NULL-ptr-dereference with cfg80211's lack of commit()
mac80211: 160MHz with extended NSS BW in CSA
====================
Link: https://lore.kernel.org/r/20210126130529.75225-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a crash that happened when changing the interface
type around a lot, and while it might have been easy to fix just
the symptom there, a little deeper investigation found that really
the reason is that we allowed packets to be transmitted while in
the middle of changing the interface type.
Disallow TX by stopping the queues while changing the type.
Fixes: 34d4bc4d41 ("mac80211: support runtime interface type changes")
Reported-by: syzbot+d7a3b15976bf7de2238a@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210122171115.b321f98f4d4f.I6997841933c17b093535c31d29355be3c0c39628@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since cfg80211 doesn't implement commit, we never really cared about
that code there (and it's configured out w/o CONFIG_WIRELESS_EXT).
After all, since it has no commit, it shouldn't return -EIWCOMMIT to
indicate commit is needed.
However, EIWCOMMIT is actually an alias for EINPROGRESS, which _can_
happen if e.g. we try to change the frequency but we're already in
the process of connecting to some network, and drivers could return
that value (or even cfg80211 itself might).
This then causes us to crash because dev->wireless_handlers is NULL
but we try to check dev->wireless_handlers->standard[0].
Fix this by also checking dev->wireless_handlers. Also simplify the
code a little bit.
Cc: stable@vger.kernel.org
Reported-by: syzbot+444248c79e117bc99f46@syzkaller.appspotmail.com
Reported-by: syzbot+8b2a88a09653d4084179@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210121171621.2076e4a37d5a.I5d9c72220fe7bb133fb718751da0180a57ecba4e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, _everything_ in cfg80211 holds the RTNL, and if you
have a slow USB device (or a few) you can get some bad lock
contention on that.
Fix that by re-adding a mutex to each wiphy/rdev as we had at
some point, so we have locking for the wireless_dev lists and
all the other things in there, and also so that drivers still
don't have to worry too much about it (they still won't get
parallel calls for a single device).
Then, we can restrict the RTNL to a few cases where we add or
remove interfaces and really need the added protection. Some
of the global list management still also uses the RTNL, since
we need to have it anyway for netdev management, but we only
hold the RTNL for very short periods of time here.
Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
coccicheck suggested using PTR_ERR_OR_ZERO() and looking at the code.
Fix the following coccicheck warnings:
./net/bridge/br_multicast.c:1295:7-13: WARNING: PTR_ERR_OR_ZERO can be
used.
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/1611542381-91178-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a placeholder field to calculate hash tuple offset. Similar to
2c407aca64 ("netfilter: conntrack: avoid gcc-10 zero-length-bounds
warning").
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Adds the random twos choice load-balancing algorithm. The algorithm will
pick two random servers based on weights. Then select the server with
the least amount of connections normalized by weight. The algorithm
avoids the "herd behavior" problem. The algorithm comes from a paper
by Michael Mitzenmacher available here
http://www.eecs.harvard.edu/~michaelm/NEWWORK/postscripts/twosurvey.pdf
Signed-off-by: Darby Payne <darby.payne@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fold xp_assign_dev and __xp_assign_dev. The former directly calls the
latter.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210122105351.11751-3-bjorn.topel@gmail.com
The explicit_free parameter of the __xsk_rcv() function was used to
mark whether the call was via the generic XDP or the native XDP
path. Instead of clutter the code with if-statements and "true/false"
parameters which are hard to understand, simply move the explicit free
to the __xsk_map_redirect() which is always called from the native XDP
path.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210122105351.11751-2-bjorn.topel@gmail.com
Use nf_ct_get() directly, its a small inline helper without dependencies.
Add CONFIG_NF_CONNTRACK guards to elide the relevant part when conntrack
isn't available at all.
v2: add ifdef guard around nf_ct_get call (kernel test robot)
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Remove duplicated helper functions to parse opaque XDR objects
and place inside new file net/sunrpc/auth_gss/auth_gss_internal.h.
In the new file carry the license and copyright from the source file
net/sunrpc/auth_gss/auth_gss.c. Finally, update the comment inside
include/linux/sunrpc/xdr.h since lockd is not the only user of
struct xdr_netobj.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Bluetooth Core Specification v5.2, Vol. 3, Part A, section 1.4, table
1.1:
'Start Fragments always either begin with the first octet of the Basic
L2CAP header of a PDU or they have a length of zero (see [Vol 2] Part
B, Section 6.6.2).'
Apparently this was changed by the following errata:
https://www.bluetooth.org/tse/errata_view.cfm?errata_id=10216
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Jump to the label done to decrement the reference count of HCI device
hdev on path that the Inquiry procedure is interrupted.
Fixes: 3e13fa1e1f ("Bluetooth: Fix hci_inquiry ioctl usage")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This adds logic to disable and reenable advertisement filters during
suspend and resume. After this patch, we would only receive packets from
devices in allow list during suspend.
Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When MSFT extension is supported, we don't have to interleave the scan
as we could just do allowlist scan.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Implements the feature to disable/enable the filter used for
advertising monitor on MSFT controller, effectively have the same
effect as "remove all monitors" and "add all previously removed
monitors".
This feature would be needed when suspending, where we would not want
to get packets from anything outside the allowlist. Note that the
integration with the suspending part is not included in this patch.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the controller is powered off, the registered advertising monitor
is removed from the controller. This patch handles the re-registration
of those monitors when the power is on.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Enables advertising monitor offloading to the controller, if MSFT
extension is supported. The kernel won't adjust the monitor parameters
to match what the controller supports - that is the user space's
responsibility.
This patch only manages the addition of monitors. Monitor removal is
going to be handled by another patch.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
MSFT needs rssi parameter for monitoring advertisement packet,
therefore we should supply them from mgmt. This adds a new opcode
to add advertisement monitor with rssi parameters.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>