gfx 11.0.4 range starts from 0x80.
Fixes: 311d52367d ("drm/amdgpu: add soc21 common ip block support for GC 11.0.4")
Cc: stable@vger.kernel.org
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reported-by: Yogesh Mohan Marimuthu <Yogesh.Mohanmarimuthu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prevent further dpm casting on legacy asics without od_enabled in
amdgpu_dpm_is_overdrive_supported. This can avoid UBSAN complain
in init sequence.
v2: add a macro to check legacy dpm instead of checking asic family/type
v3: refine macro name for naming consistency
Suggested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
v1: Vmbo->shadow is used to back vram bo up when vram lost. So that we
should set shadow as vmbo->shadow to recover vmbo->bo
v2: Modify if(vmbo->shadow) shadow = vmbo->shadow as if(!vmbo->shadow)
continue;
Fixes: e18aaea733 ("drm/amdgpu: move shadow_list to amdgpu_bo_vm")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lin.Cao <lincao12@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The gfx.cp_ecc_error_irq is retired in gfx11. In gfx_v11_0_hw_fini still
use amdgpu_irq_put to disable this interrupt, which caused the call trace
in this function.
[ 102.873958] Call Trace:
[ 102.873959] <TASK>
[ 102.873961] gfx_v11_0_hw_fini+0x23/0x1e0 [amdgpu]
[ 102.874019] gfx_v11_0_suspend+0xe/0x20 [amdgpu]
[ 102.874072] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[ 102.874122] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 102.874172] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[ 102.874223] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[ 102.874321] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 102.874375] process_one_work+0x21f/0x3f0
[ 102.874377] worker_thread+0x200/0x3e0
[ 102.874378] ? process_one_work+0x3f0/0x3f0
[ 102.874379] kthread+0xfd/0x130
[ 102.874380] ? kthread_complete_and_exit+0x20/0x20
[ 102.874381] ret_from_fork+0x22/0x30
v2:
- Handle umc and gfx ras cases in separated patch
- Retired the gfx_v11_0_cp_ecc_error_irq_funcs in gfx11
v3:
- Improve the subject and code comments
- Add judgment on gfx11 in the function of amdgpu_gfx_ras_late_init
v4:
- Drop the define of CP_ME1_PIPE_INST_ADDR_INTERVAL and
SET_ECC_ME_PIPE_STATE which using in gfx_v11_0_set_cp_ecc_error_state
- Check cp_ecc_error_irq.funcs rather than ip version for a more
sustainable life
v5:
- Simplify judgment conditions
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Description]
- Due to bandwidth / arbitration issues at 200Mhz DCFCLK,
we want to enforce minimum 60us of prefetch to avoid
intermittent underflow issues
- Since 60us prefetch is already enforced for UCLK DPM0,
and many DCFCLK's > 200Mhz are mapped to UCLK DPM1, in
theory there should not be any UCLK DPM regressions by
enforcing greater prefetch
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This is originally a change (9c75891f) in DCN32 because of the lack
of interface to set TX while keeping symclk on. Adding this workaround
to DCN314 will resolve the current issue.
Fixes: 9c75891fee ("drm/amd/display: rework recent update PHY state commit")
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dpm_is_overdrive_supported is a common API across all
asics, so we should cast pp_handle into correct structure
under different power frameworks.
v2: using return directly to simplify code
v3: SI asic does not carry od_enabled member in pp_handle, and update Fixes tag
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2541
Fixes: eb4900aa4c ("drm/amdgpu: Fix kernel NULL pointer dereference in dpm functions")
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
APUs w/ gfx9 onwards doesn't reply on PCIe atomics, rather
it is internal path w/ native atomic support. Set have_atomics_support
to true.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the maximum resolution reported for HEVC encoding on VCN 3
devices to reflect its 8K encoding capability.
v2: Also update the max height for H.264 encoding to match spec.
(Ruijing)
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
i915:
- skl pipe source size check
- mtl transcoder mask fix
- DSI power on sequence fix
- GuC versioning corner case fix
-----BEGIN PGP SIGNATURE-----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=W1N0
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"This is the fixes for the last couple of weeks for i915 and last 3
weeks for amdgpu, lots of them but pretty scattered around and all
pretty small.
amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
i915:
- skl pipe source size check
- mtl transcoder mask fix
- DSI power on sequence fix
- GuC versioning corner case fix"
* tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits)
drm/amdgpu: drop redundant sched job cleanup when cs is aborted
drm/amd/display: filter out invalid bits in pipe_fuses
drm/amd/display: Change default Z8 watermark values
drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV
drm/amdgpu: add a missing lock for AMDGPU_SCHED
drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
drm/amdgpu: Enable doorbell selfring after resize FB BAR
drm/amdgpu: Use the default reset when loading or reloading the driver
drm/amdgpu: Fix mode2 reset for sienna cichlid
drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()
drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info
drm/i915/guc: Actually return an error if GuC version range check fails
drm/amd/display: Lowering min Z8 residency time
drm/amd/display: fix flickering caused by S/G mode
drm/amd/display: Set min_width and min_height capability for DCN30
drm/amd/display: Isolate remaining FPU code in DCN32
drm/amd/display: Update bounding box values for DCN321
drm/amd/display: Do not clear GPINT register when releasing DMUB from reset
...
Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457
Fixes: f7d66fb2ea ("drm/amdgpu: cleanup scheduler job initialization v2")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Reading pipe_fuses from register may have invalid bits set, which may
affect the num_pipes erroneously.
[How]
Add read_pipes_fuses() call and filter bits based on expected number
of pipes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
[Why & How]
Previous Z8 watermark values were causing flickering and OTC underflow.
Updating Z8 watermark values based on the measurement.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This WPTR_POLL_ENABLE is a hardware contigious polling which will cause
FCLK and UCLK to keep on a high level.
Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by
firmware.
So to save power, SR-IOV also needs to disable this bit
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mgr->ctx_handles should be protected by mgr->lock.
v2: improve commit message
v3: add a Fixes tag
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 52c6a62c64 ("drm/amdgpu: add interface for editing a foreign process's priority v3")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As made mention of in commit 08c677cb0b ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af556104
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
The selfring doorbell aperture will change when resize FB
BAR successfully during gmc sw init, we should reorder
the sequence of enabling doorbell selfring aperture.
[How]
Move enable_doorbell_selfring_aperture from *_common_hw_init
to *_common_late_init.
This fixes the potential issue that GPU ring its own
doorbell when this device is in translated mode when
iommu is on.
v2: Remove *_enable_doorbell_aperture functions (Christian)
v3: Add comments to note that why we need enable doorbell
selfring late (Christian)
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Christian K�nig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before this change, sienna_cichlid_get_reset_handler will always
return NULL, although the module parameter reset_method is 3
when loading amdgpu driver.
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add support for building the kernel using PC-relative addressing on Power10.
- Allow HV KVM guests on Power10 to use prefixed instructions.
- Unify support for the P2020 CPU (85xx) into a single machine description.
- Always build the 64-bit kernel with 128-bit long double.
- Drop support for several obsolete 2000's era development boards as
identified by Paul Gortmaker.
- A series fixing VFIO on Power since some generic changes.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel Stanley,
Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro Yamada, Michael
Neuling, Nathan Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin,
Nick Desaulniers, Nysal Jan K.A, Pali Rohár, Paul Gortmaker, Paul Mackerras,
Petr Vaněk, Randy Dunlap, Rob Herring, Sachin Sant, Sean Christopherson, Segher
Boessenkool, Timothy Pearson.
-----BEGIN PGP SIGNATURE-----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=89WH
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for building the kernel using PC-relative addressing on
Power10.
- Allow HV KVM guests on Power10 to use prefixed instructions.
- Unify support for the P2020 CPU (85xx) into a single machine
description.
- Always build the 64-bit kernel with 128-bit long double.
- Drop support for several obsolete 2000's era development boards as
identified by Paul Gortmaker.
- A series fixing VFIO on Power since some generic changes.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel
Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro
Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas
Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali
Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob
Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and
Timothy Pearson.
* tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
powerpc/64s: Disable pcrel code model on Clang
powerpc: Fix merge conflict between pcrel and copy_thread changes
powerpc/configs/powernv: Add IGB=y
powerpc/configs/64s: Drop JFS Filesystem
powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems
powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest
powerpc/configs: Make pseries_le an alias for ppc64le_guest
powerpc/configs: Incorporate generic kvm_guest.config into guest configs
powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs
powerpc/configs/64s: Enable Device Mapper options
powerpc/configs/64s: Enable PSTORE
powerpc/configs/64s: Enable VLAN support
powerpc/configs/64s: Enable BLK_DEV_NVME
powerpc/configs/64s: Drop REISERFS
powerpc/configs/64s: Use SHA512 for module signatures
powerpc/configs/64s: Enable IO_STRICT_DEVMEM
powerpc/configs/64s: Enable SCHEDSTATS
powerpc/configs/64s: Enable DEBUG_VM & other options
powerpc/configs/64s: Enable EMULATED_STATS
powerpc/configs/64s: Enable KUNIT and most tests
...
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
[Why & How]
Per HW team request, we're lowering the minimum Z8
residency time to 2000us. This enables Z8 support for additional
modes we were previously blocking like 2k>60hz
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, on a handful of ASICs. We allow the framebuffer for a given
plane to exist in either VRAM or GTT. However, if the plane's new
framebuffer is in a different memory domain than it's previous
framebuffer, flipping between them can cause the screen to flicker. So,
to fix this, don't perform an immediate flip in the aforementioned case.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Reviewed-by: Roman Li <Roman.Li@amd.com>
Fixes: 81d0bcf990 ("drm/amdgpu: make display pinning more flexible (v2)")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add min_width, min_height fields to dc_plane_cap structure. Set values
to 16x16 for discrete ASICs, and 64x64 for others.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There's no need to clear GPINT register for DMUB
when releasing it from reset. Fix that.
Fixes: ac2e555e0a ("drm/amd/display: Add DMCUB source files and changes for DCN32/321")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Since the variable fpu_recursion_depth is per-CPU type, it has one copy
on each CPU, thread migration causes data consistency issue, then the
call trace shows up. And preemption disabling can't prevent migration.
[how]
Disable migration to ensure consistency of fpu_recursion_depth.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Remove incorrect early return in a device specific fifo reset workaround
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
We were not returning -EINVAL on DSC atomic check fail. Add it.
Fixes: 71be4b16d3 ("drm/amd/display: dsc validate fail not pass to atomic check")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The eDP retrain will cause the DPCD 300 to be reset to default.
And cause the brightness can't be set correctly.
[How]
delete the call to edp panel power control in both
enable_link_output/disable_link_output entirely and
only call edp panel control in enable_link_dp and
disable_link_dp once.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When link training during engine recovery, ASSR might fail causing panel
mode to be reset to default. This should not happen for eDP as it
will prevent the panel from turning back on.
[How]
Added dp_panel_mode to struct dc_link to remember previously applied
panel mode. Do not reset panel mode to default while performing link
training if previously used panel mode = eDP.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Mityushkin <michael.mityushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] hdcp are enabled for asics from raven. for old asics
which hdcp are not enabled, hdcp_workqueue are null. some
access to hdcp work queue are not guarded with pointer check.
[How] add hdcp_workqueue pointer check before access workqueue.
Fixes: 82986fd631 ("drm/amd/display: save restore hdcp state when display is unplugged from mst hub")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2444
Reported-by: Niklāvs Koļesņikovs <89q1r14hd@relay.firefox.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Description]
- Having excessively large margin causes failure in the static
schedulability check in some cases for SubVP + DRR
- 100us of DRR margin is sufficient based on a weeks worth of
stress testing on different display configs
Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
when amdgpu_dm_update_connector_after_detect is called
two times successively with valid sink, memory allocated of
aconnector->timing_requested for the first call is not free.
this causes memeleak.
[How]
allocate memory only when aconnector->timing_requested
is null.
Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
When skipping full modeset since the only state change was a front porch
change, the DC commit sequence requires extra checks to handle non
existant plane states being asked to be removed from context.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When IGT's kms_hdmi_inject forces EDID for HDMI audio, dc rejects the
request because virtual signal is not in dc_is_audio_capable_signal
function.
[How]
Includes SIGNAL_TYPE_VIRTUAL as audio capable.
Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenchieh Chien <wenchieh.chien@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add code path to copy dmub caps to dc, which is missing on dcn31
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the commit fff7eb56b3 ("drm/amd/display: Don't set dram clock
change requirement for SubVP") was merged, we missed some parts
associated with the MCLK switch. This commit adds all the missing parts.
Fixes: fff7eb56b3 ("drm/amd/display: Don't set dram clock change requirement for SubVP")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It is possible to commit state multiple times in rapid succession with
FAMS enabled; if each of these commits were to set optimized_required,
then the user may see latency.
[HOW]
fw_based_mclk_switching is currently not used in dc->clk_mgr; use it
to track whether the current state has FAMS enabled;
if it has, then do not disable FAMS in prepare_bandwidth, and do not set
optimized_required.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.
[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets
optimized_required.
This change expects that Freesync requests are blocked when
optimized_required is true.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table (Jessica
Clarke).
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang).
* Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID()
(Xiongfeng Wang).
* Add missing tables to astable (Pedro Falcato).
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen).
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski).
* Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary).
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore).
* Add support for ClockInput resource (v6.5) (Niyas Sait).
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L).
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L).
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein).
* Make ACPICA code support flexible arrays properly (Kees Cook).
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red).
* Add os specific support for Zephyr RTOS to ACPICA (Najumon).
* Update version to 20230331 (Bob Moore).
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne).
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu).
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen).
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser).
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker).
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko).
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan).
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue).
- Add CXL error types to the error injection code in APEI (Tony Luck).
- Refactor acpi_data_prop_read_single() (Andy Shevchenko).
- Fix two issues in the ACPI SBS driver (Armin Wolf).
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi).
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K).
- Update the pm_profile sysfs attribute documentation (Rafael Wysocki).
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=O61K
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20230331, fix the ACPI SBS driver and the evaluation of the _PDC
method on Xen dom0 in the ACPI processor driver, update the ACPI
driver for Intel SoCs and clean up code in multiple places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table
(Jessica Clarke)
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang)
* Add missing macro ACPI_FUNCTION_TRACE() for
acpi_ns_repair_HID() (Xiongfeng Wang)
* Add missing tables to astable (Pedro Falcato)
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen)
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski)
* Add support for Arm's MPAM ACPI table version 2 (Hesham
Almatary)
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore)
* Add support for ClockInput resource (v6.5) (Niyas Sait)
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L)
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil
V L)
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein)
* Make ACPICA code support flexible arrays properly (Kees Cook)
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red)
* Add os specific support for Zephyr RTOS to ACPICA (Najumon)
* Update version to 20230331 (Bob Moore)
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne)
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu)
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen)
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser)
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker)
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko)
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan)
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue)
- Add CXL error types to the error injection code in APEI (Tony Luck)
- Refactor acpi_data_prop_read_single() (Andy Shevchenko)
- Fix two issues in the ACPI SBS driver (Armin Wolf)
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi)
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki)
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede)
- Replace irqdomain.h include with struct declarations in ACPI
headers and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring)
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K)
- Update the pm_profile sysfs attribute documentation (Rafael
Wysocki)
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede)"
* tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
ACPICA: Update version to 20230331
ACPICA: add os specific support for Zephyr RTOS
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
ACPICA: acpi_madt_oem_data: Fix flexible array member definition
...
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2.
- INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should
be used to trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmRGFU4ACgkQDHTzWXnE
hr5m4w/9GzutylTH5aY+otFRNR6uKWGJZ9d90RLyLOE3vjE+7/Q/36EXPOjZctVt
VgfQD1giKIGD9ENcCfwbw6iwyVAjLvinBr3Hz4NleEu1TjdXPJvgo9OW/+FQKVi6
1vWH/mcnN6o89m3Mme7T2drFtwy3Y6/l5EY18yNyI7XeQVUMaDTr9Lvcriq0Sigc
CInYxilIxViKioYZQmHihXPnZ89nNQZweN2GtDu8O9Bw1Z1eEyn0kRzb3px2Zl6T
MpQEQasrPDdF3LFlVWs0AlKmLFbhqV9Pq/OPfowfAWT5RSXpeDvO95NaL3EPzFXy
AO6jWHR7/VpvWvj4iJ6R35TLgi/CyASxjJ8Cr9k61Sb1U2WthMEmtd1BKBtI5mTq
Us7yP2WJle3LXEqXyvDKDGsZf8kOQ4nyJx+3CJof5Tbnzy3hn+JUkTiUweSDQ14x
CHEz7TI8WY5G96+zcyBcee0MWa3V6IXH0cjuMMUiSHw1uir34LuyP+plaELp3eqv
MFf5WUJEuU9DmDlxRd2W+g6fmKWaEkY2ksWcbD7H3BZrBmnxkS4LIyfC9HJirGCC
4JF4+4k55F/UAzQOi/4hQxulPtQmHug2/9c29IqZerwxekYdMRkb75rIoVf0IfF4
uLexY0u3aO+IKZ7ygSL9MAwAyiJU6ulYigMLxWMjT7vU36CF5Z8=
=NUEy
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is a new Qualcomm accel driver for their QAIC, dma-fence got a
deadline feature added, lots of refactoring around fbdev emulation,
and the usual pre-release hw enablements from AMD and Intel and fixes
everywhere.
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific
engines inside Gaudi2.
- INFO ioctl the amount of device memory that the driver and f/w
reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should be used to
trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w
events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support"
* tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits)
drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
drm/exynos: Implement fbdev emulation as in-kernel client
drm/exynos: Initialize fbdev DRM client
drm/exynos: Remove fb_helper from struct exynos_drm_private
drm/exynos: Remove struct exynos_drm_fbdev
drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev
drm/i915: Fix memory leaks in i915 selftests
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
drm/i915/gt: Avoid out-of-bounds access when loading HuC
drm/amdgpu: add some basic elements for multiple XCD case
drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)
Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"
drm/amdgpu: add common ip block for GC 9.4.3
drm/amd/display: Add logging when DP link training Clock recovery is Successful
drm/amdgpu: add common early init support for GC 9.4.3
drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3
drm/amd/display: Add logging when setting DP sink power state fails
drm/amdkfd: Add gfx_target_version for GC 9.4.3
drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3
drm/amdgpu: reserve the old gc_11_0_*_mes.bin
...
