- Convert from printk() to pr_*(),
- Add missing continuations,
- Join broken messages.
Note that printk(KERN_DEBUG ...) is retained, to preserve behavior
(pr_debug() is a dummy if DEBUG is not defined).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rich Felker <dalias@libc.org>
Rejoin the broken lines by using pr_cont().
Convert the remaining printk() calls to pr_*() while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rich Felker <dalias@libc.org>
Rejoin the broken lines by dropping the log level parameters and using
pr_cont().
Use "%px" to print sensible addresses in call traces.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rich Felker <dalias@libc.org>
Rejoin the broken lines by using pr_cont().
Convert the remaining printk() calls to pr_*() while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rich Felker <dalias@libc.org>
This reverts commit 8b92f34877.
"data" became the log level in commit 539e786cc3 ("sh: add loglvl
to show_trace()"), so we do need to keep the printk() before the
continuation in print_trace_address().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
This reverts commit 2deebe4d56.
printk_address() is always used as a continuation of the previous
logging, hence it should not include a log level.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
Somewhere along the patch handling path, both the old "printk(KERN_ALERT
....)" and the new "pr_alert(...)" were retained, leading to the
duplicate printing of "PC:".
Drop the old one.
Fixes: eaabf98b09 ("sh: fault: modernize printing of kernel messages")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
As of commit 37744feebc ("sh: remove sh5 support"), support for
the SH5-based Cayman platform can no longer be selected.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
Since the removal of core support for SH5, Cayman support can no longer
be selected.
Fixes: 37744feebc ("sh: remove sh5 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
This reverts commit d1f56f318d.
__delay() is an internal implementation detail on several architectures.
Drivers should not call __delay() directly, as it has non-standardized
semantics, or may not even exist.
Hence there is no need to export __delay() to modules.
See also include/asm-generic/delay.h:
/* Undefined functions to get compile-time errors */
...
extern void __delay(unsigned long loops);
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
Trying to build the kernel with CONFIG_INFINIBAND_USER_ACCESS enabled fails
ERROR: "__get_user_unknown" [drivers/infiniband/core/ib_uverbs.ko] undefined!
with on SH since the kernel misses a 64-bit implementation of get_user().
Implement the missing 64-bit get_user() as __get_user_u64(), matching the
already existing __put_user_u64() which implements the 64-bit put_user().
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Rich Felker <dalias@libc.org>
Function dma_alloc_coherent use in buf already zeroes out memory,
so memset is not needed.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Rich Felker <dalias@libc.org>
The pgd kmem_cache allocation both specified __GFP_ZERO and had a
constructor which makes no sense. Remove __GFP_ZERO and zero the user
parts of the pgd explicitly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Rich Felker <dalias@libc.org>
Exception vector is missing on nommu platform and that is an issue.
This patch is tested in Sipeed Maix Bit Dev Board.
Fixes: 79b1feba54 ("RISC-V: Setup exception vector early")
Suggested-by: Anup Patel <anup@brainfault.org>
Suggested-by: Atish Patra <atishp@atishpatra.org>
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This is the set of patches which arrived too late to stabilise in
-next for the first pull. It's really just an lpfc driver update and
an assortment of minor fixes, all in drivers. The only core update is
to the zone block device driver, which isn't the one most people use.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXza9yiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYyiAQCUJJ8m
vraqyBzjAPWpPsoNZmrvUxciXEDhoLrFo4Nl8wEAoJPVjUd79dXCJHB1Oq+MaeaF
LODgv2bO1F4TCf59F+4=
=+wdb
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is the set of patches which arrived too late to stabilise in
-next for the first pull.
It's really just an lpfc driver update and an assortment of minor
fixes, all in drivers. The only core update is to the zone block
device driver, which isn't the one most people use"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Update lpfc version to 12.8.0.3
scsi: lpfc: Fix LUN loss after cable pull
scsi: lpfc: Fix validation of bsg reply lengths
scsi: lpfc: Fix retry of PRLI when status indicates its unsupported
scsi: lpfc: Fix oops when unloading driver while running mds diags
scsi: lpfc: Fix RSCN timeout due to incorrect gidft counter
scsi: lpfc: Fix no message shown for lpfc_hdw_queue out of range value
scsi: lpfc: Fix FCoE speed reporting
scsi: lpfc: Add missing misc_deregister() for lpfc_init()
scsi: lpfc: nvmet: Avoid hang / use-after-free again when destroying targetport
scsi: scsi_transport_sas: Add spaces around binary operator "|"
scsi: sd_zbc: Improve zone revalidation
scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases
scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del()
scsi: target: Make iscsit_register_transport() return void
The majority of this batch is conversion of the PWM period and duty
cycle to 64-bit unsigned integers, which is required so that some types
of hardware can generate the full range of signals that they're capable
of. The remainder is mostly minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl82iq0ZHHRoaWVycnku
cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoTXSD/9h6v8w/9oC9xDxEO+6vTF3
XNMWBO3PxzjNpI02bxYVMckb8J6AsDFwB+fsMnRvHooFXqi+/5iQvxyt6b8rTIRA
ThOEd+PJnX9l8P9I/k/5RbdiYA51GtJomDc1f85yCs6UaMnTMRj9+S3E7rWPW+LZ
azKegtqQloJxMM8w+MBS3+3w1c4h80tfHphU4DbNDCTS0Pq2rXK2B0BJq+oFWXS+
GpTut7jzbQBpVm5+pF/3YwjQ1ODoHL+LJYtjdYdFk0HJtddsGIzR8xFAci//maZj
NtbE6tFFSz97z18QCvHBNDySV3/qVIy+Pr2g141yv0uhjvJ3zms4uveD3wmxFSbZ
0LWaGdCRUbffI1g5uCWjSEspWo+oEY3A6LQ2RVpmNL44T/rvgZuYKbJmFSnM3qr5
DzB0gx5ZlagXGO9W1u4aif+VBfJdF7JUGWazbyZ1O36bSPF83T7db8Shok10Yx+J
DsmWaxDMxVE8DFNUOaoDHXUq8L8gW8OFKeBttO3zUwCCxpIn9qunwDiFqvlkQHgI
xVqC5Yp1oMqq5enYlLGLqnCahYuUXgBW91uyEpeB4hzZMhU2CTgei0bzHdu5xDE4
5ZDks2EZ7CibJJ2EKwWgIF8iVkpepdXj0Wpy7HT6FStR2/kauT58h36bLzhjbh54
GtD3Z5TDtV8lrabOfmk6pA==
=v6MG
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The majority of this batch is conversion of the PWM period and duty
cycle to 64-bit unsigned integers, which is required so that some
types of hardware can generate the full range of signals that they're
capable of.
The remainder is mostly minor fixes and cleanups"
* tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: bcm-iproc: handle clk_get_rate() return
pwm: Replace HTTP links with HTTPS ones
pwm: omap-dmtimer: Repair pwm_omap_dmtimer_chip's broken kerneldoc header
pwm: mediatek: Provide missing kerneldoc description for 'soc' arg
pwm: bcm-kona: Remove impossible comparison when validating duty cycle
pwm: bcm-iproc: Remove impossible comparison when validating duty cycle
pwm: iqs620a: Use lowercase hexadecimal literals for consistency
pwm: Convert period and duty cycle to u64
clk: pwm: Use 64-bit division function
backlight: pwm_bl: Use 64-bit division function
pwm: sun4i: Use nsecs_to_jiffies to avoid a division
pwm: sifive: Use 64-bit division macro
pwm: iqs620a: Use 64-bit division
pwm: imx27: Use 64-bit division macro
pwm: imx-tpm: Use 64-bit division macro
pwm: clps711x: Use 64-bit division macro
hwmon: pwm-fan: Use 64-bit division macro
drm/i915: Use 64-bit division macro
All device-specific small fixes and quirks mostly for usual
suspects, USB-audio and HD-audio.
-----BEGIN PGP SIGNATURE-----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=5zbC
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All device-specific small fixes and quirks mostly for usual suspects,
USB-audio and HD-audio"
* tag 'sound-fix-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: echoaudio: Fix potential Oops in snd_echo_resume()
ALSA: hda/hdmi: Use force connectivity quirk on another HP desktop
ALSA: hda/realtek - Fix unused variable warning
ALSA: hda - reverse the setting value in the micmute_led_set
ALSA: echoaduio: Drop superfluous volatile modifier
ALSA: usb-audio: Disable Lenovo P620 Rear line-in volume control
ALSA: usb-audio: add quirk for Pioneer DDJ-RB
ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109
ALSA: hda - fix the micmute led status for Lenovo ThinkCentre AIO
ALSA: usb-audio: fix overeager device match for MacroSilicon MS2109
ALSA: hda/realtek: Fix pin default on Intel NUC 8 Rugged
ALSA: usb-audio: Creative USB X-Fi Pro SB1095 volume knob support
ALSA: usb-audio: fix spelling mistake "buss" -> "bus"
This remoes the code from the COW path to call debug_dma_assert_idle(),
which was added many years ago.
Google shows that it hasn't caught anything in the 6+ years we've had it
apart from a false positive, and Hugh just noticed how it had a very
unfortunate spinlock serialization in the COW path.
He fixed that issue the previous commit (a85ffd59bd36: "dma-debug: fix
debug_dma_assert_idle(), use rcu_read_lock()"), but let's see if anybody
even notices when we remove this function entirely.
NOTE! We keep the dma tracking infrastructure that was added by the
commit that introduced it. Partly to make it easier to resurrect this
debug code if we ever deside to, and partly because that tracking by pfn
and offset looks quite reasonable.
The problem with this debug code was simply that it was expensive and
didn't seem worth it, not that it was wrong per se.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 2a9127fcf2 ("mm: rewrite wait_on_page_bit_common()
logic") improved unlock_page(), it has become more noticeable how
cow_user_page() in a kernel with CONFIG_DMA_API_DEBUG=y can create and
suffer from heavy contention on DMA debug's radix_lock in
debug_dma_assert_idle().
It is only doing a lookup: use rcu_read_lock() and rcu_read_unlock()
instead; though that does require the static ents[] to be moved
onstack...
...but, hold on, isn't that radix_tree_gang_lookup() and loop doing
quite the wrong thing: searching CACHELINES_PER_PAGE entries for an
exact match with the first cacheline of the page in question?
radix_tree_gang_lookup() is the right tool for the job, but we need
nothing more than to check the first entry it can find, reporting if
that falls anywhere within the page.
(Is RCU safe here? As safe as using the spinlock was. The entries are
never freed, so don't need to be freed by RCU. They may be reused, and
there is a faint chance of a race, with an offending entry reused while
printing its error info; but the spinlock did not prevent that either,
and I agree that it's not worth worrying about. ]
[ Side noe: this patch is a clear improvement to the status quo, but the
next patch will be removing this debug function entirely.
But just in case we decide we want to resurrect the debugging code
some day, I'm first applying this improvement patch so that it doesn't
get lost - Linus ]
Fixes: 3b7a6418c7 ("dma debug: account for cachelines and read-only mappings in overlap tracking")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the counter
read function when time namespace support is enabled. Adding the pointer
is a NOOP for all other architectures because the compiler is supposed
to optimize that out when it is unused in the architecture specific
inline. The change also solved a similar problem for MIPS which
fortunately has time namespaces not yet enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another sequence
counter in the S390 implementation. A better solution is to utilize the
already existing VDSO sequence count for this. The core code now exposes
helper functions which allow to serialize against the timekeeper code
and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It now has
an embedded architecture specific struct embedded which defaults to an
empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support to
work from a common upstream base.
- A trivial comment fix.
-----BEGIN PGP SIGNATURE-----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=y8Z5
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
"A set of timekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the
counter read function when time namespace support is enabled.
Adding the pointer is a NOOP for all other architectures because
the compiler is supposed to optimize that out when it is unused in
the architecture specific inline. The change also solved a similar
problem for MIPS which fortunately has time namespaces not yet
enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another
sequence counter in the S390 implementation. A better solution is
to utilize the already existing VDSO sequence count for this. The
core code now exposes helper functions which allow to serialize
against the timekeeper code and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It
now has an embedded architecture specific struct embedded which
defaults to an empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support
to work from a common upstream base.
- A trivial comment fix"
* tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Delete repeated words in comments
lib/vdso: Allow to add architecture-specific vdso data
timekeeping/vsyscall: Provide vdso_update_begin/end()
vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
posix CPU timers into task work context. The tick interrupt is reduced to a
quick check which queues the work which is doing the heavy lifting before
returning to user space or going back to guest mode. Moving this out is
deferring the signal delivery slightly but posix CPU timers are inaccurate
by nature as they depend on the tick so there is no real damage. The
relevant test cases all passed.
This lifts the last offender for RT out of the hard interrupt context tick
handler, but it also has the general benefit that the actual heavy work is
accounted to the task/process and not to the tick interrupt itself.
Further optimizations are possible to break long sighand lock hold and
interrupt disabled (on !RT kernels) times when a massive amount of posix
CPU timers (which are unpriviledged) is armed for a task/process.
This is currently only enabled for x86 because the architecture has to
ensure that task work is handled in KVM before entering a guest, which was
just established for x86 with the new common entry/exit code which got
merged post 5.8 and is not the case for other KVM architectures.
-----BEGIN PGP SIGNATURE-----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=Reot
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more timer updates from Thomas Gleixner:
"A set of posix CPU timer changes which allows to defer the heavy work
of posix CPU timers into task work context. The tick interrupt is
reduced to a quick check which queues the work which is doing the
heavy lifting before returning to user space or going back to guest
mode. Moving this out is deferring the signal delivery slightly but
posix CPU timers are inaccurate by nature as they depend on the tick
so there is no real damage. The relevant test cases all passed.
This lifts the last offender for RT out of the hard interrupt context
tick handler, but it also has the general benefit that the actual
heavy work is accounted to the task/process and not to the tick
interrupt itself.
Further optimizations are possible to break long sighand lock hold and
interrupt disabled (on !RT kernels) times when a massive amount of
posix CPU timers (which are unpriviledged) is armed for a
task/process.
This is currently only enabled for x86 because the architecture has to
ensure that task work is handled in KVM before entering a guest, which
was just established for x86 with the new common entry/exit code which
got merged post 5.8 and is not the case for other KVM architectures"
* tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Select POSIX_CPU_TIMERS_TASK_WORK
posix-cpu-timers: Provide mechanisms to defer timer handling to task_work
posix-cpu-timers: Split run_posix_cpu_timers()
unlock the descriptor lock.
-----BEGIN PGP SIGNATURE-----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=/wh/
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two fixes in the core interrupt code which ensure that all error exits
unlock the descriptor lock"
* tag 'irq-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Unlock irq descriptor after errors
genirq/PM: Always unlock IRQ descriptor in rearm_wake_irq()
A few patches all over the place during this cycle, mostly bug and
sparse warning fixes for OpenRISC, but a few enhancements too. Note,
there are 2 non OpenRISC specific fixups.
Non OpenRISC fixes:
- In init we need to align the init_task correctly to fix an issue with
MUTEX_FLAGS, reviewed by Peter Z. No one picked this up so I kept it
on my tree.
- In asm-generic/io.h I fixed up some sparse warnings, OK'd by Arnd.
Arnd asked to merge it via my tree.
OpenRISC fixes:
- Many fixes for OpenRISC sprase warnings.
- Add support OpenRISC SMP tlb flushing rather than always flushing the
entire TLB on every CPU.
- Fix bug when dumping stack via /proc/xxx/stack of user threads.
-----BEGIN PGP SIGNATURE-----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=0MlF
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"A few patches all over the place during this cycle, mostly bug and
sparse warning fixes for OpenRISC, but a few enhancements too. Note,
there are 2 non OpenRISC specific fixups.
Non OpenRISC fixes:
- In init we need to align the init_task correctly to fix an issue
with MUTEX_FLAGS, reviewed by Peter Z. No one picked this up so I
kept it on my tree.
- In asm-generic/io.h I fixed up some sparse warnings, OK'd by Arnd.
Arnd asked to merge it via my tree.
OpenRISC fixes:
- Many fixes for OpenRISC sprase warnings.
- Add support OpenRISC SMP tlb flushing rather than always flushing
the entire TLB on every CPU.
- Fix bug when dumping stack via /proc/xxx/stack of user threads"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: uaccess: Add user address space check to access_ok
openrisc: signal: Fix sparse address space warnings
openrisc: uaccess: Remove unused macro __addr_ok
openrisc: uaccess: Use static inline function in access_ok
openrisc: uaccess: Fix sparse address space warnings
openrisc: io: Fixup defines and move include to the end
asm-generic/io.h: Fix sparse warnings on big-endian architectures
openrisc: Implement proper SMP tlb flushing
openrisc: Fix oops caused when dumping stack
openrisc: Add support for external initrd images
init: Align init_task to avoid conflict with MUTEX_FLAGS
openrisc: fix __user in raw_copy_to_user()'s prototype
One fix for a boot crash on some platforms introduced by the recent pkey
refactoring.
Thanks to:
Christian Zigotzky, Aneesh Kumar K.V.
-----BEGIN PGP SIGNATURE-----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=d4vU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a boot crash on some platforms introduced by the recent
pkey refactoring.
Thanks to Christian Zigotzky and Aneesh Kumar K.V"
* tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXzaSXAAKCRCAXGG7T9hj
vuSEAP4qOIv7Hr1wMJfTsN7ZoNNr/K6ph8ADcjFm9RGikn8MawD8CU/OfcFKJFwl
UVwM1HPnRG6pvCI9bmHS4WYrIBYBVw0=
=Bi6R
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- Remove support for running as 32-bit Xen PV-guest.
32-bit PV guests are rarely used, are lacking security fixes for
Meltdown, and can be easily replaced by PVH mode. Another series for
doing more cleanup will follow soon (removal of 32-bit-only pvops
functionality).
- Fixes and additional features for the Xen display frontend driver.
* tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drm/xen-front: Pass dumb buffer data offset to the backend
xen: Sync up with the canonical protocol definition in Xen
drm/xen-front: Add YUYV to supported formats
drm/xen-front: Fix misused IS_ERR_OR_NULL checks
xen/gntdev: Fix dmabuf import with non-zero sgt offset
x86/xen: drop tests for highmem in pv code
x86/xen: eliminate xen-asm_64.S
x86/xen: remove 32-bit Xen PV guest support
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl82Y6cTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXlcxCACP21ZI7RZvQBcFtTj5MWa0uwoofFqF
JDG0MvZ5zFKIJFX0pwlZIUrZY5aVJ1NwCDgCI0EXbZEazTaNCD2knFPqrLe3WUFY
mSDF9df7oW9UvTe9L4g3rYAdqsrkbgqhBypm9Vpbcazg/Ki6QVCgAhIo1lbq62+m
J2/0kLO1lVY6opr6vyobaWbm/Y4b0fbrx7N6KwUDhZUYGLGKaOc+WvsZinNl4XW6
VPiEVQUApvVxwG43rLNXjPe83DtassJ2GevSS1whXnZ+K0bViWhyYicbqEl9iV1i
nlNIkEMX5A1rdwV1zEAGyY/zWi+fi2+IdKGGEbtyUsely1vHtZuaDCiQ
=DE2Y
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyper-v fixes from Wei Liu:
- fix oops reporting on Hyper-V
- make objtool happy
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Make hv_setup_sched_clock inline
Drivers: hv: vmbus: Only notify Hyper-V for die events that are oops
syzbot found its way in 86_fsgsbase_read_task() and triggered this oops:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 6866 Comm: syz-executor262 Not tainted 5.8.0-syzkaller #0
RIP: 0010:x86_fsgsbase_read_task+0x16d/0x310 arch/x86/kernel/process_64.c:393
Call Trace:
putreg32+0x3ab/0x530 arch/x86/kernel/ptrace.c:876
genregs32_set arch/x86/kernel/ptrace.c:1026 [inline]
genregs32_set+0xa4/0x100 arch/x86/kernel/ptrace.c:1006
copy_regset_from_user include/linux/regset.h:326 [inline]
ia32_arch_ptrace arch/x86/kernel/ptrace.c:1061 [inline]
compat_arch_ptrace+0x36c/0xd90 arch/x86/kernel/ptrace.c:1198
__do_compat_sys_ptrace kernel/ptrace.c:1420 [inline]
__se_compat_sys_ptrace kernel/ptrace.c:1389 [inline]
__ia32_compat_sys_ptrace+0x220/0x2f0 kernel/ptrace.c:1389
do_syscall_32_irqs_on arch/x86/entry/common.c:84 [inline]
__do_fast_syscall_32+0x57/0x80 arch/x86/entry/common.c:126
do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:149
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
This can happen if ptrace() or sigreturn() pokes an LDT selector into FS
or GS for a task with no LDT and something tries to read the base before
a return to usermode notices the bad selector and fixes it.
The fix is to make sure ldt pointer is not NULL.
Fixes: 07e1d88ada ("x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately")
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto fix from Herbert Xu:
"This fixes a regression in af_alg"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_aead - fix uninitialized ctx->init
Summary of modules changes for the 5.9 merge window:
- Have modules that use symbols from proprietary modules inherit the
TAINT_PROPRIETARY_MODULE taint, in an effort to prevent GPL shim modules that
are used to circumvent _GPL exports. These are modules that claim to be GPL
licensed while also using symbols from proprietary modules. Such modules will
be rejected while non-GPL modules will inherit the proprietary taint.
- Module export space cleanup. Unexport symbols that are unused outside of
module.c or otherwise used in only built-in code.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Qlem
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"The most important change would be Christoph Hellwig's patch
implementing proprietary taint inheritance, in an effort to discourage
the creation of GPL "shim" modules that interface between GPL symbols
and proprietary symbols.
Summary:
- Have modules that use symbols from proprietary modules inherit the
TAINT_PROPRIETARY_MODULE taint, in an effort to prevent GPL shim
modules that are used to circumvent _GPL exports. These are modules
that claim to be GPL licensed while also using symbols from
proprietary modules. Such modules will be rejected while non-GPL
modules will inherit the proprietary taint.
- Module export space cleanup. Unexport symbols that are unused
outside of module.c or otherwise used in only built-in code"
* tag 'modules-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
modules: inherit TAINT_PROPRIETARY_MODULE
modules: return licensing information from find_symbol
modules: rename the licence field in struct symsearch to license
modules: unexport __module_address
modules: unexport __module_text_address
modules: mark each_symbol_section static
modules: mark find_symbol static
modules: mark ref_module static
modules: linux/moduleparam.h: drop duplicated word in a comment
- remove '---help---' keyword support
- fix mouse events for 'menuconfig' symbols in search view of qconf
- code cleanups of qconf
-----BEGIN PGP SIGNATURE-----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=IAh/
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- remove '---help---' keyword support
- fix mouse events for 'menuconfig' symbols in search view of qconf
- code cleanups of qconf
* tag 'kconfig-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits)
kconfig: qconf: move setOptionMode() to ConfigList from ConfigView
kconfig: qconf: do not limit the pop-up menu to the first row
kconfig: qconf: refactor icon setups
kconfig: qconf: remove unused voidPix, menuInvPix
kconfig: qconf: remove ConfigItem::text/setText
kconfig: qconf: remove ConfigList::addColumn/removeColumn
kconfig: qconf: remove ConfigItem::pixmap/setPixmap
kconfig: qconf: drop more localization code
kconfig: qconf: remove 'parent' from ConfigList::updateMenuList()
kconfig: qconf: remove unused argument from ConfigView::updateList()
kconfig: qconf: remove unused argument from ConfigList::updateList()
kconfig: qconf: omit parent to QHBoxLayout()
kconfig: qconf: remove name from ConfigSearchWindow constructor
kconfig: qconf: remove unused ConfigList::listView()
kconfig: qconf: overload addToolBar() to create and insert toolbar
kconfig: qconf: remove toolBar from ConfigMainWindow members
kconfig: qconf: use 'menu' variable for (QMenu *)
kconfig: qconf: do not use 'menu' variable for (QMenuBar *)
kconfig: qconf: remove ->addSeparator() to menuBar
kconfig: add 'static' to some file-local data
...
Another wack-a-mole pass of killing off unnecessary 'allOf + $ref'
usage.
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Signed-off-by: Rob Herring <robh@kernel.org>
And improve a bit the -m description to state that a B/K/M/G suffix is
needed.
Cc: Changbin Du <changbin.du@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During a perf-record, use the -ldebuginfod API to query a debuginfod
server, should the debug data not be found in the usual system
locations. If successful, the usual $HOME/.debug dir is populated.
Tested with:
$ find .
.
./ctags-debuginfo-5.8-26.fc31.x86_64.rpm
./usr
./usr/lib
./usr/lib/debug
./usr/lib/debug/.build-id
./usr/lib/debug/.build-id/ca
./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d
./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d.debug
./usr/lib/debug/usr
./usr/lib/debug/usr/bin
./usr/lib/debug/usr/bin/ctags-5.8-26.fc31.x86_64.debug
$ debuginfod -F .
...
$ rm -rf ~/.debug/ ; mkdir ~/.debug
$ perf record make tags
BUILD: Doing 'make -j8' parallel build
GEN tags
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.107 MB perf.data (1483 samples) ]
$ find ~/.debug | grep ctags
/home/jolsa/.debug/usr/bin/ctags
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes
$ rm -rf ~/.debug/ ; mkdir ~/.debug
$ DEBUGINFOD_URLS=http://localhost:8002 perf record make tags
BUILD: Doing 'make -j8' parallel build
GEN tags
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.108 MB perf.data (1531 samples) ]
$ find ~/.debug | grep ctag
/home/jolsa/.debug/usr/bin/ctags
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/debug
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes
Note the 'debug' file is created in the last run.
Note that currently the debuginfo data are downloaded only on record path,
we still need add this support to perf build-id/report.. and test ;-)
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the function parse_nodes_opt(), the statement "return 0;" is dead
code, remove it.
Signed-off-by: Peng Fan <fanpeng@loongson.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1597401894-27549-1-git-send-email-fanpeng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These changes take advantage of the new capability added in merge commit
00e4db5125 "Allow using computed metrics
in calculating other metrics".
The net is a simplification of the expressions for a handful of metrics,
but no functional change.
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200813222155.268183-1-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a change log after previous enhancements.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-19-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now the __cmd_ftrace() becomes a bit long. This moves the trace option
setting code to a separate function set_tracing_options().
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-18-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This allows us to trace single thread instead of the whole process.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-17-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds an option '-D/--delay' to allow us to start tracing some times
later after workload is launched.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-16-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to have a consistent view of all graph tracer options.
The original option '--graph-depth' is marked as deprecated.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-15-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds support to display irq context info for function tracer. To do
this, just specify a '--func-opts irq-info' option.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-12-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds an option '--graph-opts noirqs' to filter out functions executed
in irq context.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-11-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds an option '--graph-opts nosleep-time' which allow us only to
measure on-CPU time. This option is function_graph tracer only.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-10-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Geert Uytterhoeven