Commit graph

211030 commits

Author SHA1 Message Date
Kenneth Graunke
eeccdcac07 drm/i915: Rename graphics reset registers.
The graphics domains are listed as GRDOM in the documentation, and the
GDRST PCI config register (0xc0) is only valid on I965 and GM45.  Newer
chips (like Sandy Bridge) have a different GDRST.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21 11:19:47 +01:00
Kenneth Graunke
f49f058619 drm/i915: Actually set the reset bit in i965_reset.
Previously, it was only being set if passed GDRST_FULL - but the only
caller passed GDRST_RENDER.  So the hardware never actually reset.
The comments also did not match the code.

Instead, just set the reset bit regardless of what flags were passed.
The GPU now resets correctly on my GM45.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21 11:19:46 +01:00
Chris Wilson
a6c45cf013 drm/i915: INTEL_INFO->gen supercedes i8xx, i9xx, i965g
Avoid confusion between i965g meaning broadwater and the gen4+ chipset
families.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21 11:19:45 +01:00
Chris Wilson
219adae138 drm/i915: Cache LVDS EDID
We assume that the panel is permenantly connected and that the EDID data
is consistent from boot, so simply cache the whole EDID for the panel.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21 11:19:45 +01:00
Chris Wilson
e9e5f8e8d3 Merge branch 'drm-intel-fixes' into HEAD
Conflicts:
	drivers/char/agp/intel-agp.c
	drivers/gpu/drm/i915/intel_crt.c
2010-09-21 11:19:32 +01:00
Chris Wilson
db8c076b92 Merge remote branch 'linus' into drm-intel-fixes 2010-09-21 09:14:55 +01:00
Linus Torvalds
b30a3f6257 Linux 2.6.36-rc5 2010-09-20 16:56:53 -07:00
Linus Torvalds
6b3d2cc4e0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: vt6655: fix buffer overflow
  Revert: "Staging: batman-adv: Adding netfilter-bridge hooks"
2010-09-20 16:45:08 -07:00
Linus Torvalds
0c4ab3453a Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: musb: MAINTAINERS: Fix my mail address
  USB: serial/mos*: prevent reading uninitialized stack memory
  USB: otg: twl4030: fix phy initialization(v1)
  USB: EHCI: Disable langwell/penwell LPM capability
  usb: musb_debugfs: don't use the struct file private_data field with seq_files
2010-09-20 16:44:40 -07:00
Linus Torvalds
36ff4a5517 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: mfd: fix bug in serial_hsu_remove()
  serial: amba-pl010: fix set_ldisc
2010-09-20 16:44:24 -07:00
Dan Carpenter
dd173abfea Staging: vt6655: fix buffer overflow
"param->u.wpa_associate.wpa_ie_len" comes from the user.  We should
check it so that the copy_from_user() doesn't overflow the buffer.

Also further down in the function, we assume that if
"param->u.wpa_associate.wpa_ie_len" is set then "abyWPAIE[0]" is
initialized.  To make that work, I changed the test here to say that if
"wpa_ie_len" is set then "wpa_ie" has to be a valid pointer or we return
-EINVAL.

Oddly, we only use the first element of the abyWPAIE[] array.  So I
suspect there may be some other issues in this function.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20 16:31:54 -07:00
Sven Eckelmann
350aede603 Revert: "Staging: batman-adv: Adding netfilter-bridge hooks"
This reverts commit 96d592ed59.

The netfilter hook seems to be misused and may leak skbs in situations
when NF_HOOK returns NF_STOLEN. It may not filter everything as
expected. Also the ethernet bridge tables are not yet capable to
understand batman-adv packet correctly.

It was only added for testing purposes and can be removed again.

Reported-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20 16:31:54 -07:00
Feng Tang
e3671ac429 serial: mfd: fix bug in serial_hsu_remove()
Medfield HSU driver deal with 4 pci devices(3 uart ports + 1 dma controller),
so in pci remove func, we need handle them differently

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20 16:30:00 -07:00
Mika Westerberg
476f771cb9 serial: amba-pl010: fix set_ldisc
Commit d87d9b7d1 ("tty: serial - fix tty referencing in set_ldisc") changed
set_ldisc to take ldisc number as parameter. This patch fixes AMBA PL010 driver
according the new prototype.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20 16:30:00 -07:00
Felipe Balbi
f299470a15 USB: musb: MAINTAINERS: Fix my mail address
If we don't, contributors to musb and any USB OMAP
code will be sending mails to an unexistent inbox.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20 16:05:01 -07:00
Dan Rosenberg
a0846f1868 USB: serial/mos*: prevent reading uninitialized stack memory
The TIOCGICOUNT device ioctl in both mos7720.c and mos7840.c allows
unprivileged users to read uninitialized stack memory, because the
"reserved" member of the serial_icounter_struct struct declared on the
stack is not altered or zeroed before being copied back to the user.
This patch takes care of it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20 16:05:00 -07:00
Ming Lei
fc8f2a7608 USB: otg: twl4030: fix phy initialization(v1)
Commit 461c317705eca5cac09a360f488715927fd0a927(into 2.6.36-v3)
is put forward to power down phy if no usb cable is connected,
but does introduce the two issues below:

1), phy is not into work state if usb cable is connected
with PC during poweron, so musb device mode is not usable
in such case, follows the reasons:
	-twl4030_phy_resume is not called, so
		regulators are not enabled
		i2c access are not enabled
		usb mode not configurated

2), The kernel warings[1] of regulators 'unbalanced disables'
is caused if poweron without usb cable connected
with PC or b-device.

This patch fixes the two issues above:
	-power down phy only if no usb cable is connected with PC
and b-device
	-do phy initialization(via __twl4030_phy_resume) if usb cable
is connected with PC(vbus event) or another b-device(ID event) in
twl4030_usb_probe.

This patch also doesn't put VUSB3V1 LDO into active mode in
twl4030_usb_ldo_init until VBUS/ID change detected, so we can
save more power consumption than before.

This patch is verified OK on Beagle board either connected with
usb cable or not when poweron.

[1]. warnings of 'unbalanced disables' of regulators.
[root@OMAP3EVM /]# dmesg
------------[ cut here ]------------
WARNING: at drivers/regulator/core.c:1357 _regulator_disable+0x38/0x128()
unbalanced disables for VUSB1V8
Modules linked in:
Backtrace:
[<c0030c48>] (dump_backtrace+0x0/0x110) from [<c034f5a8>] (dump_stack+0x18/0x1c)
 r7:c78179d8 r6:c01ed6b8 r5:c0410822 r4:0000054d
[<c034f590>] (dump_stack+0x0/0x1c) from [<c0057da8>] (warn_slowpath_common+0x54/0x6c)
[<c0057d54>] (warn_slowpath_common+0x0/0x6c) from [<c0057e64>] (warn_slowpath_fmt+0x38/0x40)
 r9:00000000 r8:00000000 r7:c78e6608 r6:00000000 r5:fffffffb
 r4:c78e6c00
[<c0057e2c>] (warn_slowpath_fmt+0x0/0x40) from [<c01ed6b8>] (_regulator_disable+0x38/0x128)
 r3:c0410e53 r2:c0410ad5
[<c01ed680>] (_regulator_disable+0x0/0x128) from [<c01ed87c>] (regulator_disable+0x24/0x38)
 r7:c78e6608 r6:00000000 r5:c78e6c40 r4:c78e6c00
[<c01ed858>] (regulator_disable+0x0/0x38) from [<c02382dc>] (twl4030_phy_power+0x15c/0x17c)
 r5:c78595c0 r4:00000000
[<c0238180>] (twl4030_phy_power+0x0/0x17c) from [<c023831c>] (twl4030_phy_suspend+0x20/0x2c)
 r6:00000000 r5:c78595c0 r4:c78595c0
[<c02382fc>] (twl4030_phy_suspend+0x0/0x2c) from [<c0238638>] (twl4030_usb_irq+0x11c/0x16c)
 r5:c78595c0 r4:00000040
[<c023851c>] (twl4030_usb_irq+0x0/0x16c) from [<c034ec18>] (twl4030_usb_probe+0x2c4/0x32c)
 r6:00000000 r5:00000000 r4:c78595c0
[<c034e954>] (twl4030_usb_probe+0x0/0x32c) from [<c02152a0>] (platform_drv_probe+0x20/0x24)
 r7:00000000 r6:c047d49c r5:c78e6608 r4:c047d49c
[<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190)
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48)
 r7:00000000 r6:c78e6608 r5:c78e6608 r4:c047d49c
[<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90)
 r5:c0214390 r4:00000000
[<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94)
 r6:c78e663c r5:c78e6608 r4:c78e6608
[<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48)
 r7:00000000 r6:00000002 r5:c78e6608 r4:c78e6600
[<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4)
[<c0211b08>] (device_add+0x0/0x4b4) from [<c021597c>] (platform_device_add+0x110/0x16c)
[<c021586c>] (platform_device_add+0x0/0x16c) from [<c0220cb0>] (add_numbered_child+0xd8/0x118)
 r7:00000000 r6:c045f15c r5:c78e6600 r4:00000000
[<c0220bd8>] (add_numbered_child+0x0/0x118) from [<c001c618>] (twl_probe+0x3a4/0x72c)
[<c001c274>] (twl_probe+0x0/0x72c) from [<c02601ac>] (i2c_device_probe+0x7c/0xa4)
[<c0260130>] (i2c_device_probe+0x0/0xa4) from [<c0214244>] (driver_probe_device+0xd0/0x190)
 r5:c7856e20 r4:c047c860
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48)
 r7:c7856e04 r6:c7856e20 r5:c7856e20 r4:c047c860
[<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90)
 r5:c0214390 r4:00000000
[<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94)
 r6:c7856e54 r5:c7856e20 r4:c7856e20
[<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48)
 r7:c7856e04 r6:c78fd048 r5:c7856e20 r4:c7856e20
[<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4)
[<c0211b08>] (device_add+0x0/0x4b4) from [<c0211fd8>] (device_register+0x1c/0x20)
[<c0211fbc>] (device_register+0x0/0x20) from [<c0260aa8>] (i2c_new_device+0xec/0x150)
 r5:c7856e00 r4:c7856e20
[<c02609bc>] (i2c_new_device+0x0/0x150) from [<c0260dc0>] (i2c_register_adapter+0xa0/0x1c4)
 r7:00000000 r6:c78fd078 r5:c78fd048 r4:c781d5c0
[<c0260d20>] (i2c_register_adapter+0x0/0x1c4) from [<c0260f80>] (i2c_add_numbered_adapter+0x9c/0xb4)
 r7:00000a28 r6:c04600a8 r5:c78fd048 r4:00000000
[<c0260ee4>] (i2c_add_numbered_adapter+0x0/0xb4) from [<c034efa4>] (omap_i2c_probe+0x324/0x3e8)
 r5:00000000 r4:c78fd000
[<c034ec80>] (omap_i2c_probe+0x0/0x3e8) from [<c02152a0>] (platform_drv_probe+0x20/0x24)
[<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190)
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c021436c>] (__driver_attach+0x68/0x8c)
 r7:c78b2140 r6:c047e214 r5:c04600e4 r4:c04600b0
[<c0214304>] (__driver_attach+0x0/0x8c) from [<c021399c>] (bus_for_each_dev+0x50/0x84)
 r7:c78b2140 r6:c047e214 r5:c0214304 r4:00000000
[<c021394c>] (bus_for_each_dev+0x0/0x84) from [<c0214068>] (driver_attach+0x20/0x28)
 r6:c047e214 r5:c047e214 r4:c00270d0
[<c0214048>] (driver_attach+0x0/0x28) from [<c0213274>] (bus_add_driver+0xa8/0x228)
[<c02131cc>] (bus_add_driver+0x0/0x228) from [<c02146a4>] (driver_register+0xb0/0x13c)
[<c02145f4>] (driver_register+0x0/0x13c) from [<c0215744>] (platform_driver_register+0x4c/0x60)
 r9:00000000 r8:c001f688 r7:00000013 r6:c005b6fc r5:c00083dc
r4:c00270d0
[<c02156f8>] (platform_driver_register+0x0/0x60) from [<c001f69c>] (omap_i2c_init_driver+0x14/0x1c)
[<c001f688>] (omap_i2c_init_driver+0x0/0x1c) from [<c002c460>] (do_one_initcall+0xd0/0x1a4)
[<c002c390>] (do_one_initcall+0x0/0x1a4) from [<c0008478>] (kernel_init+0x9c/0x154)
[<c00083dc>] (kernel_init+0x0/0x154) from [<c005b6fc>] (do_exit+0x0/0x688)
 r5:c00083dc r4:00000000
---[ end trace 1b75b31a2719ed1d ]---

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Felipe Balbi <me@felipebalbi.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20 16:05:00 -07:00
Alek Du
fc92825061 USB: EHCI: Disable langwell/penwell LPM capability
We have to do so due to HW limitation.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20 16:04:59 -07:00
Mathias Nyman
024cfa5943 usb: musb_debugfs: don't use the struct file private_data field with seq_files
seq_files use the private_data field of a file struct for storing a seq_file structure,
data should be stored in seq_file's own private field (e.g. file->private_data->private)
Otherwise seq_release() will free the private data when the file is closed.

Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20 16:04:56 -07:00
Chris Wilson
af62610313 drm/i915: Hold a reference to the object whilst unbinding the eviction list
During heavy aperture thrashing we may be forced to wait upon several active
objects during eviction. The active list may be the last reference to
these objects and so the action of waiting upon one of them may cause
another to be freed (and itself unbound). To prevent the object
disappearing underneath us, we need to acquire and hold a reference
whilst unbinding.

This should fix the reported page refcount OOPS:

kernel BUG at drivers/gpu/drm/i915/i915_gem.c:1444!
...
RIP: 0010:[<ffffffffa0093026>]  [<ffffffffa0093026>] i915_gem_object_put_pages+0x25/0xf5 [i915]
Call Trace:
 [<ffffffffa009481d>] i915_gem_object_unbind+0xc5/0x1a7 [i915]
 [<ffffffffa0098ab2>] i915_gem_evict_something+0x3bd/0x409 [i915]
 [<ffffffffa0027923>] ? drm_gem_object_lookup+0x27/0x57 [drm]
 [<ffffffffa0093bc3>] i915_gem_object_bind_to_gtt+0x1d3/0x279 [i915]
 [<ffffffffa0095b30>] i915_gem_object_pin+0xa3/0x146 [i915]
 [<ffffffffa0027948>] ? drm_gem_object_lookup+0x4c/0x57 [drm]
 [<ffffffffa00961bc>] i915_gem_do_execbuffer+0x50d/0xe32 [i915]

Reported-by: Shawn Starr <shawn.starr@rogers.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18902
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-20 20:50:00 +01:00
Al Viro
ed1cde6836 frv: double syscall restarts, syscall restart in sigreturn()
We need to make sure that only the first do_signal() to be handled on
the way out syscall will bother with syscall restarts; additionally, the
check on the "signal has user handler" path had been wrong - compare
with restart prevention in sigreturn()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20 10:44:38 -07:00
Al Viro
44c7afffa4 frv: handling of restart into restart_syscall is fscked
do_signal() should place the syscall number in gr7, not gr8 when
handling ERESTART_WOULDBLOCK.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20 10:44:38 -07:00
Al Viro
ad0acab455 frv: avoid infinite loop of SIGSEGV delivery
Use force_sigsegv() rather than force_sig(SIGSEGV, ...) as the former
resets the SEGV handler pointer which will kill the process, rather than
leaving it open to an infinite loop if the SEGV handler itself caused a
SEGV signal.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20 10:44:37 -07:00
Al Viro
5f4ad04a1e frv: fix address verification holes in setup_frame/setup_rt_frame
a) sa_handler might be maliciously set to point to kernel memory;
   blindly dereferencing it in FDPIC case is a Bad Idea(tm).

b) I'm not sure you need that set_fs(USER_DS) there at all, but if you
   do, you'd better do it *before* checking the frame you've decided to
   use with access_ok(), lest sigaltstack() becomes a convenient
   roothole.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20 10:44:37 -07:00
Al Viro
20cd514d0f frv: restart_block.fn needs to be reset on sigreturn
Reset restart_block.fn on executing a sigreturn such that any currently
pending system call restarts will be forced to return -EINTR.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20 10:44:37 -07:00
Hugh Dickins
31c4a3d3a0 mm: further fix swapin race condition
Commit 4969c1192d ("mm: fix swapin race condition") is now agreed to
be incomplete.  There's a race, not very much less likely than the
original race envisaged, in which it is further necessary to check that
the swapcache page's swap has not changed.

Here's the reasoning: cast in terms of reuse_swap_page(), but probably
could be reformulated to rely on try_to_free_swap() instead, or on
swapoff+swapon.

A, faults into do_swap_page(): does page1 = lookup_swap_cache(swap1) and
comes through the lock_page(page1).

B, a racing thread of the same process, faults on the same address: does
page1 = lookup_swap_cache(swap1) and now waits in lock_page(page1), but
for whatever reason is unlucky not to get the lock any time soon.

A carries on through do_swap_page(), a write fault, but cannot reuse the
swap page1 (another reference to swap1).  Unlocks the page1 (but B
doesn't get it yet), does COW in do_wp_page(), page2 now in that pte.

C, perhaps the parent of A+B, comes in and write faults the same swap
page1 into its mm, reuse_swap_page() succeeds this time, swap1 is freed.

kswapd comes in after some time (B still unlucky) and swaps out some
pages from A+B and C: it allocates the original swap1 to page2 in A+B,
and some other swap2 to the original page1 now in C.  But does not
immediately free page1 (actually it couldn't: B holds a reference),
leaving it in swap cache for now.

B at last gets the lock on page1, hooray! Is PageSwapCache(page1)? Yes.
Is pte_same(*page_table, orig_pte)? Yes, because page2 has now been
given the swap1 which page1 used to have.  So B proceeds to insert page1
into A+B's page_table, though its content now belongs to C, quite
different from what A wrote there.

B ought to have checked that page1's swap was still swap1.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20 10:44:37 -07:00
Linus Torvalds
2422084a94 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: deal with multiple simultaneously pending signals
  alpha: fix a 14 years old bug in sigreturn tracing
  alpha: unb0rk sigsuspend() and rt_sigsuspend()
  alpha: belated ERESTART_RESTARTBLOCK race fix
  alpha: Shift perf event pending work earlier in timer interrupt
  alpha: wire up fanotify and prlimit64 syscalls
  alpha: kill big kernel lock
  alpha: fix build breakage in asm/cacheflush.h
  alpha: remove unnecessary cast from void* in assignment.
  alpha: Use static const char * const where possible
2010-09-19 11:09:23 -07:00
Linus Torvalds
81cef8e38b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide: Fix ordering of procfs registry.
2010-09-19 11:06:34 -07:00
Linus Torvalds
7d7dee96e1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  dca: disable dca on IOAT ver.3.0 multiple-IOH platforms
  netpoll: Disable IRQ around RCU dereference in netpoll_rx
  sctp: Do not reset the packet during sctp_packet_config().
  net/llc: storing negative error codes in unsigned short
  MAINTAINERS: move atlx discussions to netdev
  drivers/net/cxgb3/cxgb3_main.c: prevent reading uninitialized stack memory
  drivers/net/eql.c: prevent reading uninitialized stack memory
  drivers/net/usb/hso.c: prevent reading uninitialized memory
  xfrm: dont assume rcu_read_lock in xfrm_output_one()
  r8169: Handle rxfifo errors on 8168 chips
  3c59x: Remove atomic context inside vortex_{set|get}_wol
  tcp: Prevent overzealous packetization by SWS logic.
  net: RPS needs to depend upon USE_GENERIC_SMP_HELPERS
  phylib: fix PAL state machine restart on resume
  net: use rcu_barrier() in rollback_registered_many
  bonding: correctly process non-linear skbs
  ipv4: enable getsockopt() for IP_NODEFRAG
  ipv4: force_igmp_version ignored when a IGMPv3 query received
  ppp: potential NULL dereference in ppp_mp_explode()
  net/llc: make opt unsigned in llc_ui_setsockopt()
  ...
2010-09-19 11:05:50 -07:00
Linus Torvalds
f1c9c9797a Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung
* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410
  ARM: S3C64XX: Fix coding style errors on mach-real6410
  ARM: S3C64XX: Prototype SPI devices
  ARM: S3C64XX: Fix dev-spi build
  ARM: SAMSUNG: Fix on s5p_gpio_[get,set]_drvstr
  ARM: SAMSUNG: Fix on drive strength value
  ARM: S5PV210: Add FIMC clocks
  ARM: S5PV210: Reduce the iodesc length of systimer
  ARM: S5PV210: Update I2C-1 Clock Register Property.
  ARM: S5P: Decrease IO Registers memory region size on FIMC
  ARM: S5P: Fix DMA coherent mask for FIMC
2010-09-19 11:05:05 -07:00
Jan Harkes
112d421df2 Coda: mount hangs because of missed REQ_WRITE rename
Coda's REQ_* defines were renamed to avoid clashes with the block layer
(commit 4aeefdc69f: "coda: fixup clash with block layer REQ_*
defines").

However one was missed and response messages are no longer matched with
requests and waiting threads are no longer woken up.  This patch fixes
this.

Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
[ Also fixed up whitespace while at it  -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-19 11:03:09 -07:00
Al Viro
494486a1d2 alpha: deal with multiple simultaneously pending signals
Unlike the other targets, alpha sets _one_ sigframe and
buggers off until the next syscall/interrupt, even if
more signals are pending.  It leads to quite a few unpleasant
inconsistencies, starting with SIGSEGV potentially arriving
not where it should and including e.g. mess with sigsuspend();
consider two pending signals blocked until sigsuspend()
unblocks them.  We pick the first one; then, if we are hit
by interrupt while in the handler, we process the second one
as well.  If we are not, and if no syscalls had been made,
we get out of the first handler and leave the second signal
pending; normally sigreturn() would've picked it anyway, but
here it starts with restoring the original mask and voila -
the second signal is blocked again.  On everything else we
get both delivered consistently.

It's actually easy to fix; the only thing to watch out for
is prevention of double syscall restart.  Fortunately, the
idea I've nicked from arm fix by rmk works just fine...

Testcase demonstrating the behaviour in question; on alpha
we get one or both flags set (usually one), on everything
else both are always set.
	#include <signal.h>
	#include <stdio.h>
	int had1, had2;
	void f1(int sig) { had1 = 1; }
	void f2(int sig) { had2 = 1; }
	main()
	{
		sigset_t set1, set2;
		sigemptyset(&set1);
		sigemptyset(&set2);
		sigaddset(&set2, 1);
		sigaddset(&set2, 2);
		signal(1, f1);
		signal(2, f2);
		sigprocmask(SIG_SETMASK, &set2, NULL);
		raise(1);
		raise(2);
		sigsuspend(&set1);
		printf("had1:%d had2:%d\n", had1, had2);
	}

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:08:29 -04:00
Al Viro
5329363861 alpha: fix a 14 years old bug in sigreturn tracing
The way sigreturn() is implemented on alpha breaks PTRACE_SYSCALL,
all way back to 1.3.95 when alpha has grown PTRACE_SYSCALL support.

What happens is direct return to ret_from_syscall, in order to bypass
mangling of a3 (error indicator) and prevent other mutilations of
registers (e.g. by syscall restart).  That's fine, but... the entire
TIF_SYSCALL_TRACE codepath is kept separate on alpha and post-syscall
stopping/notifying the tracer is after the syscall.  And the normal
path we are forcibly switching to doesn't have it.

So we end up with *one* stop in traced sigreturn() vs. two in other
syscalls.  And yes, strace is visibly broken by that; try to strace
the following
	#include <signal.h>
	#include <stdio.h>
	void f(int sig) {}
	main()
	{
		signal(SIGHUP, f);
		raise(SIGHUP);
		write(1, "eeeek\n", 6);
	}
and watch the show.  The
	close(1)                                = 405
in the end of strace output is coming from return value of write() (6 ==
__NR_close on alpha) and syscall number of exit_group() (__NR_exit_group ==
405 there).

The fix is fairly simple - the only thing we end up missing is the call
of syscall_trace() and we can tell whether we'd been called from the
SYSCALL_TRACE path by checking ra value.  Since we are setting the
switch_stack up (that's what sys_sigreturn() does), we have the right
environment for calling syscall_trace() - just before we call
undo_switch_stack() and return.  Since undo_switch_stack() will overwrite
s0 anyway, we can use it to store the result of "has it been called from
SYSCALL_TRACE path?" check.  The same thing applies in rt_sigreturn().

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:08:28 -04:00
Al Viro
392fb6e354 alpha: unb0rk sigsuspend() and rt_sigsuspend()
Old code used to set regs->r0 and regs->r19 to force the right
return value.  Leaving that after switch to ERESTARTNOHAND
was a Bad Idea(tm), since now that screws the restart - if we
hit the case when get_signal_to_deliver() returns 0, we will
step back to syscall insn, with v0 set to EINTR and a3 to 1.
The latter won't matter, since EINTR is 4, aka __NR_write.

Testcase:

	#include <signal.h>
	#define _GNU_SOURCE
	#include <unistd.h>
	#include <sys/syscall.h>

	main()
	{
		sigset_t mask;
		sigemptyset(&mask);
		sigaddset(&mask, SIGCONT);
		sigprocmask(SIG_SETMASK, &mask, NULL);
		kill(0, SIGCONT);
		syscall(__NR_sigsuspend, 1, "b0rken\n", 7);
	}

results on alpha in immediate message to stdout...

Fix is obvious; moreover, since we don't need regs anymore, we can
switch to normal prototypes for these guys and lose the wrappers.
Even better, rt_sigsuspend() is identical to generic version in
kernel/signal.c now.

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:08:28 -04:00
Al Viro
2deba1bd71 alpha: belated ERESTART_RESTARTBLOCK race fix
same thing as had been done on other targets back in 2003 -
move setting ->restart_block.fn into {rt_,}sigreturn().

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:08:27 -04:00
Michael Cree
bdc8b8914b alpha: Shift perf event pending work earlier in timer interrupt
Pending work from the performance event subsystem is executed in
the timer interrupt.  This patch shifts the call to
perf_event_do_pending() before the call to update_process_times()
as the latter may call back into the perf event subsystem and it
is prudent to have the pending work executed first.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:19 -04:00
Mikael Pettersson
531f0474bf alpha: wire up fanotify and prlimit64 syscalls
The 2.6.36-rc kernel added three new system calls:
fanotify_init, fanotify_mark, and prlimit64.  This
patch wires them up on Alpha.

Built and booted on an XP900.  Untested beyond that.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:19 -04:00
Arnd Bergmann
12e750d956 alpha: kill big kernel lock
All uses of the BKL on alpha are totally bogus, nothing
is really protected by this. Remove the remaining users
so we don't have to mark alpha as 'depends on BKL'.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:18 -04:00
Tejun Heo
b97f897d60 alpha: fix build breakage in asm/cacheflush.h
Alpha SMP flush_icache_user_range() is implemented as an inline
function inside include/asm/cacheflush.h.  It dereferences @current
but doesn't include linux/sched.h and thus causes build failure if
linux/sched.h wasn't included previously.  Fix it by including the
needed header file explicitly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:18 -04:00
matt mooney
af96f8a340 alpha: remove unnecessary cast from void* in assignment.
Acked-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:17 -04:00
Joe Perches
31019075f4 alpha: Use static const char * const where possible
Acked-by: Richard Henderson  <rth@twiddle.net>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:17 -04:00
Chris Wilson
f899fc64cd drm/i915: use GMBUS to manage i2c links
Use the GMBUS interface rather than direct bit banging to grab the EDID
over DDC (and for other forms of auxiliary communication with external
display controllers). The hope is that this method will be much faster
and more reliable than bit banging for fetching EDIDs from buggy monitors
or through switches, though we still preserve the bit banging as a
fallback in case GMBUS fails.

Based on an original patch by Jesse Barnes.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-18 15:46:19 +01:00
Sosnowski, Maciej
4e8cec269d dca: disable dca on IOAT ver.3.0 multiple-IOH platforms
Direct Cache Access is not supported on IOAT ver.3.0 multiple-IOH platforms.
This patch blocks registering of dca providers when multiple IOH detected with IOAT ver.3.0.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 20:08:21 -07:00
Darius Augulis
4d89ecaae9 ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410
Add IORESOURCE_IRQ_HIGHLEVEL irq flag to dm9000 driver
platform data in board mach-real6410.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-18 09:54:55 +09:00
Darius Augulis
591cd25ee3 ARM: S3C64XX: Fix coding style errors on mach-real6410
Fix errors reported by checkpatch.pl script

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-18 09:54:55 +09:00
Mark Brown
5343795fda ARM: S3C64XX: Prototype SPI devices
Avoids build warnings due to the undeclared non-statics.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-18 09:54:54 +09:00
Herbert Xu
f0f9deae9e netpoll: Disable IRQ around RCU dereference in netpoll_rx
We cannot use rcu_dereference_bh safely in netpoll_rx as we may
be called with IRQs disabled.  We could however simply disable
IRQs as that too causes BH to be disabled and is safe in either
case.

Thanks to John Linville for discovering this bug and providing
a patch.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:55:03 -07:00
Vlad Yasevich
4bdab43323 sctp: Do not reset the packet during sctp_packet_config().
sctp_packet_config() is called when getting the packet ready
for appending of chunks.  The function should not touch the
current state, since it's possible to ping-pong between two
transports when sending, and that can result packet corruption
followed by skb overlfow crash.

Reported-by: Thomas Dreibholz <dreibh@iem.uni-due.de>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:47:56 -07:00
Linus Torvalds
151b6a5f1d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: pcm - Fix race with proc files
  ALSA: pcm - Fix unbalanced pm_qos_request
  ALSA: HDA: Enable internal speaker on Dell M101z
  ALSA: patch_nvhdmi.c: Fix supported sample rate list.
  sound: Remove pr_<level> uses of KERN_<level>
  ALSA: hda - Add quirk for Toshiba C650D using a Conexant CX20585
  ALSA: hda_intel: ALSA HD Audio patch for Intel Patsburg DeviceIDs
2010-09-17 10:53:28 -07:00
Linus Torvalds
509344b8b4 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (lm95241) Replace rate sysfs attribute with update_interval
  hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval
  hwmon: (w83627ehf) Use proper exit sequence
  hwmon: (emc1403) Remove unnecessary hwmon_device_unregister
  hwmon: (f75375s) Do not overwrite values read from registers
  hwmon: (f75375s) Shift control mode to the correct bit position
  hwmon: New subsystem maintainers
  hwmon: (lis3lv02d) Prevent NULL pointer dereference
2010-09-17 10:25:47 -07:00