- Fix DTC unit_address_vs_reg warnings in OPP entries by replacing
'@' with '-' as the OPP nodes will never have a "reg" property.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZSlgkAAoJEFBXWFqHsHzOxVsIALRBWPPcnJBNafvKxtL+DH63
9lt62gZwKzLerqPVchGvapHfvpS5tu19fmmlvYIDZIICD4hjPQgdSN9EmKjGkhdo
sIpBqJgYZ6i7OJEJMNKEUaDPqLXJY9Q2DVVVwIudtNnIu5EPYlCrQuGjQ5l2SXfk
HeSeIOfybCbQM67fe2hP1Uk9P4AeVs+grTyg4nH3qP4kgEnd5fLkdNPdF2NGytE9
IdzykK6LFDzDDW4qFL8T8luJpzh3gEsy2ecXpoI3WyCpdaZvIrFgXtvoFzdBTKBX
4MQEnwaBn5OscAnXXGRzyPOsovSC6o6lkLCNw97ZwEbZGG4HdorhW8RGqqPm0yU=
=/6Fg
-----END PGP SIGNATURE-----
Merge tag 'zte-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Pull "ZTE arm64 device tree updates for 4.13" from Shawn Guo:
- Fix DTC unit_address_vs_reg warnings in OPP entries by replacing
'@' with '-' as the OPP nodes will never have a "reg" property.
* tag 'zte-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: zte: Use - instead of @ for DT OPP entries
This resolves a build error in the next/dt branch:
In file included from arch/arm64/boot/dts/mediatek/mt6797-evb.dts:16:0:
arch/arm64/boot/dts/mediatek/mt6797.dtsi:15:10: fatal error: dt-bindings/power/mt6797-power.h: No such file or directory
003f5d0c34 ("arm64: dts: mediatek: add clk and scp nodes for MT6797")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- A series from NXP employee Li Yang that updates the copyright claims
to comply with company policy.
- A patch-set from Madalin Bucur that adds Data Path Acceleration
Architecture (DPAA) QBMan and FMan. Quite a few .dtsi files are
created for SoCs with different DPAA configuration to include the
devices as needed.
- Enable UHS-I SD and eMMC support for LS1046A and LS208xA RDB/QDS
boards.
- Enable TMU device for thermal management support on LS1088A.
- Update SATA device node for LS1088A with correct compatible and ECC
register bit.
- A few small random device tree updates.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZRpzyAAoJEFBXWFqHsHzOiB0H/2j7iQRVuiwINPE1VlIyWIrC
GrBVcf3chm0R/9E87LtX0PdgX2FweKyQ6AHDK2A8zM68pavX70LGVRfKSYqFoVN8
dEIAHhvNiLMVCPbxiuDtYSsWBSnWLM5+PEpy6pUSej9A/9m6KLyeX82+0QYL/tL0
/DaN+vwVQm5GYi/5KiK3JQ765Vva435ImYf3+N15Jra5NXVDn4myInOOcvcX6zK+
WtTckAyJT9e8KLfNA5UT39KbRRD8sZjlIF75TGu6RJGT1KWbU+atzEp1L9Nwgg51
+5pW11vs5ADoqFiT6LdjGjFf1WJEphWbLoDknDr+QJJThi1mCMy2pU7xMVUF86I=
=uI6T
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
The Freescale arm64 device tree updates for 4.13:
- A series from NXP employee Li Yang that updates the copyright claims
to comply with company policy.
- A patch-set from Madalin Bucur that adds Data Path Acceleration
Architecture (DPAA) QBMan and FMan. Quite a few .dtsi files are
created for SoCs with different DPAA configuration to include the
devices as needed.
- Enable UHS-I SD and eMMC support for LS1046A and LS208xA RDB/QDS
boards.
- Enable TMU device for thermal management support on LS1088A.
- Update SATA device node for LS1088A with correct compatible and ECC
register bit.
- A few small random device tree updates.
* tag 'imx-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
arm64: dts: ls1088a: update sata node
dt-bindings: ahci-fsl-qoriq: add ls1088a chip name to the list
arm64: dts: ls1012a: Add coreclk
arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node
arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB
arm64: dts: ls1043a: Add generic compatible string for I2C EEPROM
arm64: dts: add LS1046A DPAA FMan nodes
arm64: dts: add LS1043A DPAA FMan support
arm64: dts: add DPAA FMan nodes
arm64: dts: add LS1046A DPAA QBMan nodes
arm64: dts: add LS1043A DPAA QBMan nodes
arm64: dts: add DPAA QBMan portals
arm64: dts: ls1088a: Add TMU device tree support
arm64: dts: ls1088a: update the sata node
arm64: dts: Add flash node for ls1088a qds and rdb
arm64: dts: ls1088a: add esdhc node
arm64: dts: ls1012a: add eSDHC nodes
arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS
arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB
mmc: dt: add compatible into eSDHC required properties
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- Improve the mcbin support (Armada 8040 based board): add sdhci and
the second 1G port
- Improve crypro nodes description on Aramda 7K/8K
- Use new binding for ap806 clocks
- Improve mdio nodes and add xmdio on Aramda 7K/8K
- Add second SGCI node on Armada 37xx
- Improve the description of the Armada 3720 DB board
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWUTPlSMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71VOLAJoC5+faPv4o
ob78Tena5JEbNcQtlQCeKrl7v3V4DP3BMhlBa9eguRn4RRQ=
=LHta
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.13-1' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.13 (part 1)
- Improve the mcbin support (Armada 8040 based board): add sdhci and
the second 1G port
- Improve crypro nodes description on Aramda 7K/8K
- Use new binding for ap806 clocks
- Improve mdio nodes and add xmdio on Aramda 7K/8K
- Add second SGCI node on Armada 37xx
- Improve the description of the Armada 3720 DB board
* tag 'mvebu-dt64-4.13-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add xmdio nodes for 7k/8k
arm64: dts: marvell: add a comment on the cp110 slave node status
arm64: dts: marvell: remove cpm crypto nodes from dts files
arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
arm64: dts: marvell: armada-3720-db: Add vqmmc regulator for SD slot
arm64: dts: marvell: Enable second SDHCI controller in Armada 37xx
arm64: dts: marvell: armada-37xx: Use angle bracket for each register set
arm64: dts: marvell: armada-37xx: Align the compatible string
arm64: dts: marvell: armada-3720-db: Add information about the V2 board
arm64: dts: marvell: armada-3720-db: Sort the dts node alphabetically
arm64: dts: marvell: disable the mdio nodes by default
arm64: dts: marvell: explicitly enable the mdio nodes for 7k/8k DB
arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k
arm64: dts: marvell: 8040-mcbin: Enable 1GB Ethernet
arm64: dts: marvell: cp110: add required clocks for mdio interface
arm64: dts: marvell: use new binding for the system controller on ap806
arm64: dts: marvell: remove clock-output-names on ap806
arm64: dts: marvell: add second 1G port on the Armada 8040 DB
arm64: dts: marvell: mcbin: add sdhci
arm64: dts: marvell: add clocks for Armada AP806 XOR engines
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add reset control properties for audio to r9a779[56] SoCs
* Add add DMA for IIC_DVFS to r9a779[56] SoCs
* Add support for Salvator-XS and H3ULCB with R-Car H3 (r8a7795) ES2
* Add missing index to PWM pinctrl subnode name to Salvator-X board
* Add 12288000 for sound ADG to Salvator-X and ULCB boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wed7
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Second Round of Renesas ARM64 Based SoC DT Updates for v4.13
* Add reset control properties for audio to r9a779[56] SoCs
* Add add DMA for IIC_DVFS to r9a779[56] SoCs
* Add support for Salvator-XS and H3ULCB with R-Car H3 (r8a7795) ES2
* Add missing index to PWM pinctrl subnode name to Salvator-X board
* Add 12288000 for sound ADG to Salvator-X and ULCB boards
* tag 'renesas-arm64-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: r8a7796: Add reset control properties for audio
arm64: dts: r8a7795: Add reset control properties for audio
arm64: dts: renesas: Add support for Salvator-XS with R-Car H3 ES2.0
arm64: dts: renesas: Add common Salvator-XS board support
arm64: dts: renesas: Extract common Salvator-X/XS board support
arm64: dts: salvator-x: Add missing index to PWM pinctrl subnode name
arm64: dts: r8a7795: h3ulcb: Add support for R-Car H3 ES2.0
arm64: dts: r8a7796: add DMA for IIC_DVFS
arm64: dts: r8a7795: add DMA for IIC_DVFS
arm64: dts: ulcb: add 12288000 for sound ADG
arm64: dts: salvator-x: add 12288000 for sound ADG
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds the CCPLEX cluster on Tegra186, which is used to initiate CPU
frequency and voltage transitions.
Also included is a bit of cleanup for PCI related device tree content,
in preparation for a future DTC release that has additional checks for
the PCI bus.
-----BEGIN PGP SIGNATURE-----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=nFWX
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
arm64: tegra: Device tree changes for v4.13-rc1
This adds the CCPLEX cluster on Tegra186, which is used to initiate CPU
frequency and voltage transitions.
Also included is a bit of cleanup for PCI related device tree content,
in preparation for a future DTC release that has additional checks for
the PCI bus.
* tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: dts: nvidia: fix PCI bus dtc warnings
arm64: tegra: Add CCPLEX_CLUSTER area in Tegra186
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Adds support for Coresight CPU debug MMIO interface on all Juno variants.
2. Enables support for few SMMUs on Juno which were previously disabled
waiting for IOMMU-backed DMA API support to be stabilised.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BIsT
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
ARMv8 Vexpress/Juno DT updates for v4.13
1. Adds support for Coresight CPU debug MMIO interface on all Juno variants.
2. Enables support for few SMMUs on Juno which were previously disabled
waiting for IOMMU-backed DMA API support to be stabilised.
* tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: enable some SMMUs
arm64: dts: juno: add coresight CPU debug nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Just like the H3, this is mostly about enabling the EMAC on the H5, and
also has a new board, the Orange Pi Zero Plus 2
-----BEGIN PGP SIGNATURE-----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=x40b
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
Allwinner H5 DT changes for 4.13
Just like the H3, this is mostly about enabling the EMAC on the H5, and
also has a new board, the Orange Pi Zero Plus 2
* tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support
arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2
arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime
arm64: allwinner: h5: sort the device nodes in / part for some boards
arm64: allwinner: h5: add support for NanoPi NEO2 board
arm64: allwinner: h5: add support for Orange Pi Prime board
arm64: allwinner: orangepi-pc2: Enable dwmac-sun8i
arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
Signed-off-by: Olof Johansson <olof@lixom.net>
Our usual arm64 changes. The most notable things are the EMAC support and
USB support enhancements. There's also support for the SoPine SoM, and the
OrangePi Win.
-----BEGIN PGP SIGNATURE-----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=MCTy
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
Allwinner arm64 DT changes for 4.13
Our usual arm64 changes. The most notable things are the EMAC support and
USB support enhancements. There's also support for the SoPine SoM, and the
OrangePi Win.
* tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support
arm64: allwinner: a64: add device tree for SoPine with baseboard
arm64: allwinner: bananapi-m64: Enable dwmac-sun8i
arm64: allwinner: pine64-plus: Enable dwmac-sun8i
arm64: allwinner: pine64: Enable dwmac-sun8i
arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
arm64: allwinner: sun50i-a64: Add dt node for the syscon control module
arm64: allwinner: a64: add DTSI file for SoPine SoM
arm64: allwinner: a64: Convert CCU raw number references to macros
arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
arm64: allwinner: a64: enable RSB on A64
arm64: dts: allwinner: pine64: Add remaining UART aliases
arm64: dts: allwinner: a64: Add UART2 pin nodes
arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64
arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI
Signed-off-by: Olof Johansson <olof@lixom.net>
4.13. Please note the following from Eric:
I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
patch series, but it does require being careful since it involves a cross-merge
between branches.
- Anup documents the Broadcom Stingray binding, common clocks, adds initial
support for the Stingray DTSI and DTS files and adds support for the PL022,
PL330 and SP805
- Sandeep adds the clock nodes to the Stingray Device Tree nodes
- Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes
- Oza adds I2C Device Tree nodes to the Stingray DTSes
- Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC
- Ravijeta adds support for the USB Dual Role PHY on Northstar 2
- Gerd starts adding references to the sdhost and sdhci controllers, and then
switches the sdcard to to use the SDHOST (faster than SDHCI)
- Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
thermal driver to work correctly
-----BEGIN PGP SIGNATURE-----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=QtXg
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.13. Please note the following from Eric:
I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
patch series, but it does require being careful since it involves a cross-merge
between branches.
- Anup documents the Broadcom Stingray binding, common clocks, adds initial
support for the Stingray DTSI and DTS files and adds support for the PL022,
PL330 and SP805
- Sandeep adds the clock nodes to the Stingray Device Tree nodes
- Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes
- Oza adds I2C Device Tree nodes to the Stingray DTSes
- Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC
- Ravijeta adds support for the USB Dual Role PHY on Northstar 2
- Gerd starts adding references to the sdhost and sdhci controllers, and then
switches the sdcard to to use the SDHOST (faster than SDHCI)
- Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
thermal driver to work correctly
* tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: NS2: Add USB DRD PHY device tree node
ARM64: dts: bcm2837: Define CPU thermal coefficients
arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
arm64: dts: Add I2C DT nodes for Stingray SoC
arm64: dts: Add GPIO DT nodes for Stingray SOC
arm64: dts: Add pinctrl DT nodes for Stingray SOC
arm64: dts: Add NAND DT nodes for Stingray SOC
arm64: dts: Add clock DT nodes for Stingray SOC
arm64: dts: Initial DTS files for Broadcom Stingray SOC
dt-bindings: clk: Extend binding doc for Stingray SOC
dt-bindings: bcm: Add Broadcom Stingray bindings document
ARM: dts: bcm283x: switch from &sdhci to &sdhost
arm64: dts: bcm2837: add &sdhci and &sdhost
ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
Signed-off-by: Olof Johansson <olof@lixom.net>
mt8173:
- split USB SuperSpeed port in HighSpeed and SuperSpeed ports.
- move USB phy clocks up in hierarchy to met new bindings description
- move MDP nodes up in hierarchy to met new bindings description
mt6797:
- add basic SoC support
- add clock driver
- add power domain
dt-bindings:
- clean-up i2c binding description
- add binding for mt2701 i2c node
- add fallback compatible to scpsys binding description
- add bindings description for mt7622 and mt6796
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=H12B
-----END PGP SIGNATURE-----
Merge tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek into next/dt64
Add device tree nodes for
mt8173:
- split USB SuperSpeed port in HighSpeed and SuperSpeed ports.
- move USB phy clocks up in hierarchy to met new bindings description
- move MDP nodes up in hierarchy to met new bindings description
mt6797:
- add basic SoC support
- add clock driver
- add power domain
dt-bindings:
- clean-up i2c binding description
- add binding for mt2701 i2c node
- add fallback compatible to scpsys binding description
- add bindings description for mt7622 and mt6796
* tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek:
dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC
arm64: dts: mt8173: Fix mdp device tree
dt-bindings: i2c: Add Mediatek MT2701 i2c binding
dt-bindings: i2c-mtk: Add mt7623 binding
dt-bindings: i2c-mtk: Delete bindings
dt-bindings: i2c-mt6577: Rename file to reflect bindings
dt-bindings: mtk-sysirq: Correct bindings for supported SoCs
arm64: dts: mediatek: add clk and scp nodes for MT6797
dt-bindings: mediatek: add MT6797 power dt-bindings
arm64: dts: mediatek: add mt6797 support
dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform
arm64: dts: mt8173: move clock from phy node into port nodes
arm64: dts: mt8173: split usb SuperSpeed port into two ports
Signed-off-by: Olof Johansson <olof@lixom.net>
make usage of pci switches possible; some more qos and pinctrl nodes on
rk3399; updates for the rk3399 cpu operating points including separate
opps for the higher rates OP1 variant of the chip and mmc-nodes for
the rk3328.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlk5yQ4QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgU7rCACdo8/RlAH58lR+35ZkJ3hAFHAlJJ9l2GFW
pobp2PYjtSCLaHz2o9yU7tT0peNph3YoeL9rFS44U/NUwtE4eloPbPea/FaGJ0nW
LUP6Y5bnM8sJMmO3YrG6Y3ryjTFD9GGe9IzSDgQhai+rXPfo/FZ+a1krpNN3HrJN
dd6PIozaa5aJpDkpET7NyvTRePMiDmuJAoj/9atDr8MLDKuuKNqQtnKcXGJ+3gUb
Zc4Ltxy2uTtc9bFi05Bi19AnZIqDXAGQdU+u+lqUGps3f8Q63iWYU/OEiCw3Oozs
3RJ7KXSZ58JN1CXwxMUE1OFplF5fVvPsv4Vzg8ddJ+vOK4E4t8Pd
=UMmB
-----END PGP SIGNATURE-----
Merge tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Support for the new rk3399 firefly board; extending the pcie ranges to
make usage of pci switches possible; some more qos and pinctrl nodes on
rk3399; updates for the rk3399 cpu operating points including separate
opps for the higher rates OP1 variant of the chip and mmc-nodes for
the rk3328.
* tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: update common rk3399 operating points
arm64: dts: rockchip: introduce rk3399-op1 operating points
arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly
arm64: dts: rockchip: add ethernet0 alias on rk3399
arm64: dts: rockchip: bring rk3399-firefly power-tree in line
arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs
arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399
arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399
arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals
arm64: dts: rockchip: add some missing qos nodes on rk3399
arm64: dts: rockchip: add support for firefly-rk3399 board
dt-bindings: add firefly-rk3399 board support
Signed-off-by: Olof Johansson <olof@lixom.net>
Add the description of the xMDIO bus for the Marvell Armada 7k and
Marvell Armada 8k; for both CP110 slave and master. This bus is found
on Marvell Ethernet controllers and provides an interface with the
xMDIO bus.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The cryptographic engine found on the cp110 slave is disabled by default
because of some known limitations. Add a comment to explain why it is
disabled by default.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The cryptographic engine on the master cp110 is now enabled by default
at the SoC level. Remove its dts nodes that were only enabling it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable the cryptographic engine at the SoC level on the master cp110.
This engine is always present and do not depends on any pinmux
configuration.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
By adding this regulator, the SD cards are usable at higher speed
protocols such as SDR104.
This patch was tested with an SD HC card compatible with UHS-I.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The Armada 37xx SoCs has 2 SDHCI interfaces. This patch adds the second
one.
Moreover, the Armada 37xx DB v2 board populates the 2 SDHCI interfaces.
The second interface is using pluggable module that can either
have an SD connector or eMMC on it.
This patch adds support for SD module in the device DT.
[ gregory.clement@free-electrons.com:
- Add more detail in commit log
- Sort the dt node in address order
- Document the SD slot in the dts ]
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
When several groups of register address and size are used with reg, then
surround each one by angle bracket.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The initial device tree file was for the board V1.4. Now the V2.0 board
is also available. The same dtb will work for both, but the CON number
have changed, so update the comment in the dts to reflect this.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Sort the reference nodes in alphabetical order to ease the merge of
future nodes.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Disable the mdio nodes by default in the cp110 slave and master dtsi as
they're not wired on every board.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Explicitly enable the MDIO nodes in the Marvell Armada 7k DB and Marvell
Armada 8k DB. This is needed as the MDIO nodes will be disabled in the
CP 110 slave and master dtsi by a following up patch.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The EIP197 cryptographic engine supports 64 bits address width but is
limited to 40 bits on 7k/8k. Add a dma-mask property in the
cryptographic engine nodes to reflect this.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable the 1GB Ethernet interface that lives on the slave CP110,
with its corresponding phy (that oddly lives on the master CP110).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the three required clocks for the MDIO interface to be functional
on Armada 8k platforms. Without this, the CPU hangs, causing RCU
stalls or the system to become unresponsive.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[Thomas:
- remove mg_core_clock, since it's a parent of mg_clock
- also add clock references to the slave CP mdio instance]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The new binding for the system controller on ap806 moved the clock into a
subnode. This preliminary step will allow to add gpio and pinctrl
subnodes
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The clock-output-names of the ap806-system-controller node are not used
anymore, so remove them.
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Armada 8040 DB is equipped with 4 (2x 10G SFI + 2x 1G RGMII)
ethernet ports of which only one was hitherto enabled.
Because currently mvpp2 driver is capable of supporting only
1G RGMII/SGMII, enable second port from CP slave HW block.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add sdhci support for MACCHIATOBin boards. This uses the AP806 SDHCI
for eMMC and CP110 master for the SD card slot.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The XORv2 engines in the AP side of the Armada 7K/8K SoCs are using the
AP MS core clock as input, so this commit adds the appropriate clocks
properties.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add entry for k3-dma driver and i2s/hdmi audio devices.
This enables HDMI audio output.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Cc: Dave Long <dave.long@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Antonio Borneo <borneo.antonio@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
v2:
* Split core i2s entry into dtsi and hdmi specific bits into
hikey dts
v4:
* Rework simple-card to use many-dai-links method, as
there may be other links in the future
v5:
* Rework audio description to use the audio-card-graph method
as requested by Mark.
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add nodes for WiFi. HiKey960 is using TI WL1837MOD module.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch adds document for PCIe of Kirin SoC series.
Signed-off-by: Xiaowei Song <songxiaowei@hisilicon.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The Hi3660 SoC comes with the sp804 timer in addition to the
architecture timers. These ones are shutdown when reaching a deep idle
states and a backup timer is needed. The sp804 belongs to another power
domain and can fulfill the purpose of replacing temporarily an
architecture timer when the CPU is idle.
Describe it in the device tree, so it can be enabled at boot time.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add spi2 and spi3 device nodes for hi3660, and enable them for hikey960.
On HiKey960:
- SPI2 is wired out through low speed expansion connector.
- SPI3 is wired out through high speed expansion connector.
Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
HiKey960 has four user LEDs, and two special purpose LEDs: WiFi and BT
respectively.
All of them are implemented as GPIO.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
We use gpio_034 as power key on hikey960, and set gpio with pull-up
state, when key press the voltage on the gpio will come to lower, and
power key event will be reported.
Signed-off-by: Chen Jun <chenjun14@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
