Commit graph

206 commits

Author SHA1 Message Date
Olof Johansson
23c43df854 Merge branch 'versatile/fixes' into fixes
From Peter Maydell:
These patches fix a number of issues with the PCI controller
code for mach-versatile:

(1) The irq mapping matched neither hardware nor QEMU; we correct
it to match the hardware, which means it will also work on recent
(1.5 or later) QEMU.

(2) The code was confused between the PCI I/O window (at 0x43000000)
and the first PCI memory window (at 0x44000000), which meant that
PCI devices using PCI PIO rather than MMIO didn't work. This is
fixed (and some variables/labels are renamed to avoid further
confusion in future).

(3) The SMAP register offsets were all off-by-four, though by
fluke this didn't actually have any ill effects.

All these changes have been tested on real hardware (PB926
plus the PCI backplane), as well as on QEMU. I have confirmed
that IRQs and PCI PIO and MMIO work OK.

PCI bus-master DMA doesn't seem to work on h/w -- as far as I can
tell the device is correctly managing to DMA to the right places
in memory, but every other 32 bit word is corrupt (at least judging
from rtl8139 debug dumps of the frames it's receiving). I'm not
sure what's going on here, but since this is disjoint from
the irq and I/O issues I don't think that applying the
patches that fix those should be stalled on trying to debug
DMA problems. (DMA works fine on QEMU, incidentally.)

* versatile/fixes:
  ARM: PCI: versatile: Fix SMAP register offsets
  ARM: PCI: versatile: Fix PCI I/O
  ARM: PCI: versatile: Fix map_irq function to match hardware

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-09 17:31:04 -07:00
Peter Maydell
99f2b13037 ARM: PCI: versatile: Fix SMAP register offsets
The SMAP register offsets in the versatile PCI controller code were
all off by four.  (This didn't have any observable bad effects
because on this board PHYS_OFFSET is zero, and (a) writing zero to
the flags register at offset 0x10 has no effect and (b) the reset
value of the SMAP register is zero anyway, so failing to write SMAP2
didn't matter.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-09-04 14:53:33 -07:00
Peter Maydell
829f9fedee ARM: PCI: versatile: Fix PCI I/O
The versatile PCI controller code was confused between the
PCI I/O window (at 0x43000000) and the first PCI memory
window (at 0x44000000). Pass the correct base address to
pci_remap_io() so that PCI I/O accesses work.

Since the first PCI memory window isn't used at all (it's
an odd size), rename the associated variables and labels
so that it's clear that it isn't related to the I/O window.

This has been tested and confirmed to fix PCI I/O accesses
both on physical PB926+PCI backplane hardware and on QEMU.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-09-04 14:53:26 -07:00
Peter Maydell
f9b71fef12 ARM: PCI: versatile: Fix map_irq function to match hardware
The PCI controller code for the Versatile board has never had the
correct IRQ mapping for hardware.  For many years it had an odd
mapping ("all interrupts are int 27") which aligned with the
equivalent bug in QEMU.  However as of commit 1bc39ac5da
the mapping changed and no longer matched either hardware or QEMU,
with the result that any PCI card beyond the first in QEMU would
not have functioning interrupts; for example a boot with a SCSI
controller would time out as follows:

 ------------
 sym0: <895a> rev 0x0 at pci 0000:00:0d.0 irq 92
 sym0: SCSI BUS has been reset.
 scsi0 : sym-2.2.3
 [...]
 scsi 0:0:0:0: ABORT operation started
 scsi 0:0:0:0: ABORT operation timed-out.
 scsi 0:0:0:0: DEVICE RESET operation started
 scsi 0:0:0:0: DEVICE RESET operation timed-out.
 scsi 0:0:0:0: BUS RESET operation started
 scsi 0:0:0:0: BUS RESET operation timed-out.
 scsi 0:0:0:0: HOST RESET operation started
 sym0: SCSI BUS has been reset
 ------------

Fix the mapping so that it matches real hardware (checked against the
schematics for PB926 and backplane, and tested against the hardware).
This allows PCI cards using interrupts to work on hardware for the
first time; this change will also work with QEMU 1.5 or later, where
the equivalent bugs in the modelling of the hardware have been fixed.

Although QEMU will attempt to autodetect whether the kernel is
expecting the long-standing "everything is int 27" mapping or the one
hardware has, for certainty we force it into "definitely behave like
hardware mode"; this will avoid unexpected surprises later if we
implement sparse irqs. This is harmless on hardware.

Thanks to Paul Gortmaker for bisecting the problem and finding an initial
solution, to Russell King for providing the correct interrupt mapping,
and to Guenter Roeck for providing an initial version of this patch
and prodding me into relocating the hardware and retesting everything.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-09-04 14:52:52 -07:00
Russell King
4e218b9928 ARM: debug: move PL01X debug include into arch/arm/include/debug/
Now that the PL01X debug include can mostly stand alone without
requiring platforms to provide any macros, move it into the debug
directory so it can be directly included.  This allows us to get rid of
a lot of debug-macros include files.

The autodetect case for Versatile Express and the ux500 are left alone;
these are more complicated implementations.

Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25 17:11:06 +01:00
Russell King
5c972af407 ARM: debug: provide PL01x debug uart phys/virt address configuration options
Move the definition of the UART register addresses out of the platform
specific header files into the Kconfig files.

Acked-by: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25 17:11:05 +01:00
Robin Holt
7b6d864b48 reboot: arm: change reboot_mode to use enum reboot_mode
Preparing to move the parsing of reboot= to generic kernel code forces
the change in reboot_mode handling to use the enum.

[akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c]
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:29 -07:00
Rob Herring
818270d573 ARM: versatile: use OF init for sp804 timer
Enable DT based init for the sp804 timers on versatile DT platform.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-04-11 15:11:21 -05:00
Linus Torvalds
b274776c54 arm-soc: cleanups
A large number of cleanups, all over the platforms. This is dominated
 largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
 others moving code out of arch/arm into more appropriate subsystems.
 The clocksource and irqchip drivers are now abstracted to the point
 where platforms that are already cleaned up do not need to even specify
 the driver they use, it can all get configured from the device tree
 as we do for normal device drivers. The clocksource changes basically
 touch every single platform in the process.
 
 We further clean up the use of platform specific header files here,
 with the goal of turning more of the platforms over to being
 "multiplatform" enabled, which implies that they cannot expose
 their headers to architecture independent code any more.
 
 It is expected that no functional changes are part of the cleanup.
 The overall reduction in total code lines is mostly the result of
 removing broken and obsolete code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyKmCrR//JCVInAQIN8RAAnb/uPytmlMjn5yCksF4Mvb/FVbn/TVwz
 KRIGpCHOzyKK1q7pM8NRUVWfjW2SZqbXJFqx6zBGKSlDPvFTOhsLyyupU+Tnyu5W
 IX4eIUBwb+a6H7XDHw0X2YI8uHzi5RNLhne0A1QyDKcnuHs1LDAttXnJHaK4Ap6Y
 NN2YFt3l3ld7DXWXJtMsw5v8lC10aeIFGTvXefaPDAdeMLivmI57qEUMDXknNr7W
 Odz/Rc0/cw3BNBVl/zNHA0jw7FOjKAymCYYNUa4xDCJEr+JnIRTqizd0N/YIIC7x
 aA2xjJ3oKUFyF51yiJE6nFuTyJznhwtehc+uiMOSIkjrPLym52LEHmd7G5Yqlmjz
 oiei09qBb870q3lGxwfht9iaeIwYgQFYGfD0yW5QWArCO5pxhtCPLPH7YZNZtcQd
 ZJRSGGqT/ljBz3bm0K9OLESeeTTN7+Nxvtpiz/CD+Piegz0gWJzDYJRTzkJ3UWpA
 WTVhVQdWUeX2JrNkgM7Z3Tu8iXOe+LIEs7kVXGJZSREmIIZiRvR36UrODZtAkp9I
 7YQ+srX/uaR832pgK0RrHK0zY0psU6MmIvhYxJZFbx7keiPA9eH6drb0x7tGqcUD
 FzEUzvcZvyqppndfBi+R60H/YKAhJDEXdwxzo6dyCpPQaW1T9GnzIqXuE1zin+Aw
 X7Y8YywMbHI=
 =DvgJ
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...
2013-02-21 14:58:40 -08:00
Linus Torvalds
b24174b0cb arm-soc: non-critical bug fixes
Bug fixes that did not make it into v3.8, mostly because they were not
 considered important enough, and in some cases because bugs only show
 up in combination with other patches destined for 3.9.
 This includes a few larger patches for GPIO on the Marvell PXA platform
 and a lot of Samsung specific bug fixes, as well as a series from Arnd
 to fix older build warnings.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyI2CrR//JCVInAQKBlRAAwOc8vTQl6UHciwibXXdMfL83hH0YNwu8
 CFjnzHpvDX0YUQvW9fFPSq64CejhQumgaJYq3Te7mZW50H4hqGNqgFojPZy+2yn1
 eEIjvNrES9Sp2aJG7iT1Q9BqvWVis736W7z8kTJ6szcG5e3KGZoFNdAl9izeiHtv
 CTR9o4+XVY00eKbafVU+KJ4+/ZdptEnIWiQsg1gzImrRw/PosL/lgjYYCeRXb866
 W7qltcCdwILA8+5x4KcK9CDAQbt+G2lLsmHzH4OZ2gjZmKzvZcxTOfXxdA9439Ew
 jol5rkSAXiWcsgB4kzSx7sMGyMNim1qAu9FmhUdYqSc8UBGnGcns/QOLiGZxq9uS
 9UTkInWC9Kcy8vSIIbDBvTpEZbbA5arAuEObK2eEPWntp/UgmGiSJaQmYHY+u9yd
 BokmfSLc5g+jnQBS/H//nvPkA0ZlpknGZAovyRpjzZzYiF3LiBtsIMagYH2jVwzn
 bc633NYo5cNO9DSO8mXSG6LUJ0X5d2HrTkg7J5x9GgOr1xDaH0rFjAdCZFXSTSKu
 LVy3xehuXcHK4zbEvtgq7cjKyeIDpW0psPCXjKz4Fsreq6waPN88fHx9mVnoanII
 JY9Lq8xW/2CH8uEdPyKMss/SXdzsVIm8bR3veS3TgqZa/2maMj/EkdGmPISUUjBY
 JN48myQQSZM=
 =BbV4
 -----END PGP SIGNATURE-----

Merge tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull non-critical ARM SoC bug fixes from Arnd Bergmann:
 "Bug fixes that did not make it into v3.8, mostly because they were not
  considered important enough, and in some cases because bugs only show
  up in combination with other patches destined for 3.9.  This includes
  a few larger patches for GPIO on the Marvell PXA platform and a lot of
  Samsung specific bug fixes, as well as a series from Arnd to fix older
  build warnings."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ
  ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350
  scripts/sortextable: silence script output
  ARM: s3c: i2c: add platform_device forward declaration
  ARM: mvebu: allow selecting mvebu without Armada XP
  ARM: pick Versatile by default for !MMU
  ARM: integrator: fix build with INTEGRATOR_AP off
  ARM: integrator/versatile: fix NOMMU warnings
  ARM: sa1100: don't warn about mach/ide.h
  ARM: shmobile: fix defconfig warning on CONFIG_USB
  ARM: w90x900: fix legacy assembly syntax
  ARM: samsung: fix assembly syntax for new gas
  ARM: disable virt_to_bus/virt_to_bus almost everywhere
  ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
  ARM: SAMSUNG: Silence empty switch warning in fimc-core.h
  ARM: SAMSUNG: Silence empty switch warning in sdhci.h
  ARM: msm: proc_comm_boot_wait should not be __init
  arm: vt8500: Update MAINTAINERS entry for arch-vt8500
  ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU
  ARM: S5PV210: Fix early uart output in fifo mode
  ...
2013-02-21 14:54:55 -08:00
Arnd Bergmann
1420b22b0b ARM: pick Versatile by default for !MMU
The introduction of ARCH_MULTIPLATFORM changed
the default for nommu kernels from Versatile to
Integrator, which is less common, and does not
currently build for allnoconfig because that does
not select any of the CPUs.

This also ensures that at least one of the three
board files in versatile are enabled, which lets
us successfully build an allnoconfig kernel.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
2013-02-14 15:04:38 +01:00
Arnd Bergmann
060fd1be0c ARM: integrator/versatile: fix NOMMU warnings
On NOMMU kernels, the io_desc variables are unused
because we don't use the MMU to remap the MMIO
areas.

Marking these variables as __maybe_unused easily
avoids the otherwise harmless warnings like

warning: 'versatile_io_desc' defined but not used

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
2013-02-14 15:04:37 +01:00
Linus Walleij
e3e92a7be6 ARM: 7635/1: versatile: fix the PCI IRQ regression
The PCI IRQs were regressing due to two things:

- The PCI glue layer was using an hard-coded IRQ 27 offset.
  This caused the immediate regression.

- The SIC IRQ mask was inverted (i.e. a bit was indeed set to
  one for each valid IRQ on the SIC, but accidentally inverted
  in the init call). This has been around forever, but we have
  been saved by some other forgiving code that would reserve
  IRQ descriptors in this range, as the versatile is
  non-sparse.

When the IRQs were bumped up 32 steps so as to avoid using IRQ
zero and avoid touching the 16 legacy IRQs, things broke.

Introduce an explicit valid mask for the IRQs that are active
on the PIC/SIC, and pass that. Use the BIT() macro from
<linux/bitops.h> to make sure we hit the right bits, readily
defined in <mach/platform.h>.

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-06 09:33:09 +00:00
Olof Johansson
b28eaacfbb The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which
are unused on ARM architecure.  Samsung has some code setting up wdog
 in arch_decomp_wdog().  But since CONFIG_S3C_BOOT_WATCHDOG is defined
 nowhere, it will not run.  Otherwise, system can not boot at all when
 wdog is set up but no one pats it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQ9WSiAAoJEFBXWFqHsHzOkpYH/iHOomqWknjg0YjeUKmoqnk+
 UnAiP/OD0pOuqdC3izSq5rAaxeCn2ESYhXWdHH3LQFNnhwDPOItagY3T1dBgJH0G
 KvO3wDj0K1jUM6Nzt4hta4pnCc/KClyCcVjYrP5pE+bs3NzOzxvfj2tPc81lI0Iy
 rnkMLWw6gVRllhecUezt3TOd/GfI7NwuyjjBOLelOerbImWFqLOCNIZSRQlazbyS
 hFh4OkR7yoU6vEvPdmS4B4A5PWBHlxiUS6Wr4v+doGFPiFgR05tJodLnnJ/KGWmG
 LFY99MyeBvcgiUlFcUpiVLYpWJh+7IB1LJH+IGNJbWFYC+Yvn/o9IRYO8kvuiYE=
 =weNJ
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup

From Shawn Guo:
The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which
are unused on ARM architecure.  Samsung has some code setting up wdog
in arch_decomp_wdog().  But since CONFIG_S3C_BOOT_WATCHDOG is defined
nowhere, it will not run.  Otherwise, system can not boot at all when
wdog is set up but no one pats it.

* tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: samsung: remove unused arch_decomp_wdog() code
  ARM: remove unused arch_decomp_wdog()
  ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-05 10:26:20 -08:00
Olof Johansson
f8060f5446 Initial irqchip init infrastructure and GIC and VIC clean-ups
This creates irqchip initialization infrastructure from Thomas
 Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips
 and adapted to use the new infrastructure. All DT enabled platforms
 using GIC and VIC are converted over to use the new irqchip_init.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQ8ZobAAoJEMhvYp4jgsXiihIH/2VvxmSHZb0e3jN6AR0B42b7
 9EwX0IE0B23t91hNTwdzzmTJQYA7pMmWkgHNfd3vIeqSepJAmrVv/gp4iM9CtPwE
 KNh+kDWOK2ZsOH4Vb0lYRJHN8WQOIQHuCUr9+MdYLNOgf/pPL6G/Y9kv9A1e7fTC
 W+tFRjC5N1ilZMGyowX12L1wnwDk6kHzed6YV6bskC17cZ9/pg8PhSVbM4A/3kAv
 NXYKqbXJb+eCsWGXg/knZXOL6V9gBwvVYoe4O9X3nQ0226AWB9caad8l8tchAjRB
 fmrYF1tbkpOWPnLxhvQy5b5MJichJgTMJHh7RgiEcc/3f63kOljjlx4QKiqHvT0=
 =q7gm
 -----END PGP SIGNATURE-----

Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux into next/cleanup

From Rob Herring:

Initial irqchip init infrastructure and GIC and VIC clean-ups

This creates irqchip initialization infrastructure from Thomas
Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips
and adapted to use the new infrastructure. All DT enabled platforms
using GIC and VIC are converted over to use the new irqchip_init.

* tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux:
  irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h
  ARM: picoxcell: use common irqchip_init function
  ARM: spear: use common irqchip_init function
  irqchip: Move ARM VIC to drivers/irqchip
  ARM: samsung: remove unused tick.h
  ARM: remove unneeded vic.h includes
  ARM: remove mach .handle_irq for VIC users
  ARM: VIC: set handle_arch_irq in VIC initialization
  ARM: VIC: shrink down vic.h
  irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h
  ARM: use common irqchip_init for GIC init
  irqchip: Move ARM GIC to drivers/irqchip
  ARM: remove mach .handle_irq for GIC users
  ARM: GIC: set handle_arch_irq in GIC initialization
  ARM: GIC: remove direct use of gic_raise_softirq
  ARM: GIC: remove assembly ifdefs from gic.h
  ARM: mach-ux500: use SGI0 to wake up the other core
  arm: add set_handle_irq() to register the parent IRQ controller handler function
  irqchip: add basic infrastructure
  irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS

Fixed up massive merge conflicts with the timer cleanup due to adjacent changes:

Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-bcm/board_bcm.c
	arch/arm/mach-cns3xxx/cns3420vb.c
	arch/arm/mach-ep93xx/adssphere.c
	arch/arm/mach-ep93xx/edb93xx.c
	arch/arm/mach-ep93xx/gesbc9312.c
	arch/arm/mach-ep93xx/micro9.c
	arch/arm/mach-ep93xx/simone.c
	arch/arm/mach-ep93xx/snappercl15.c
	arch/arm/mach-ep93xx/ts72xx.c
	arch/arm/mach-ep93xx/vision_ep9307.c
	arch/arm/mach-highbank/highbank.c
	arch/arm/mach-imx/mach-imx6q.c
	arch/arm/mach-msm/board-dt-8960.c
	arch/arm/mach-netx/nxdb500.c
	arch/arm/mach-netx/nxdkn.c
	arch/arm/mach-netx/nxeb500hmi.c
	arch/arm/mach-nomadik/board-nhk8815.c
	arch/arm/mach-picoxcell/common.c
	arch/arm/mach-realview/realview_eb.c
	arch/arm/mach-realview/realview_pb1176.c
	arch/arm/mach-realview/realview_pb11mp.c
	arch/arm/mach-realview/realview_pba8.c
	arch/arm/mach-realview/realview_pbx.c
	arch/arm/mach-socfpga/socfpga.c
	arch/arm/mach-spear13xx/spear1310.c
	arch/arm/mach-spear13xx/spear1340.c
	arch/arm/mach-spear13xx/spear13xx.c
	arch/arm/mach-spear3xx/spear300.c
	arch/arm/mach-spear3xx/spear310.c
	arch/arm/mach-spear3xx/spear320.c
	arch/arm/mach-spear3xx/spear3xx.c
	arch/arm/mach-spear6xx/spear6xx.c
	arch/arm/mach-tegra/board-dt-tegra20.c
	arch/arm/mach-tegra/board-dt-tegra30.c
	arch/arm/mach-u300/core.c
	arch/arm/mach-ux500/board-mop500.c
	arch/arm/mach-ux500/cpu-db8500.c
	arch/arm/mach-versatile/versatile_ab.c
	arch/arm/mach-versatile/versatile_dt.c
	arch/arm/mach-versatile/versatile_pb.c
	arch/arm/mach-vexpress/v2m.c
	include/asm-generic/vmlinux.lds.h
2013-01-14 19:55:03 -08:00
Olof Johansson
8d84981e39 Merge branch 'clocksource/cleanup' into next/cleanup
Clockevent cleanup series from Shawn Guo.

Resolved move/change conflict in mach-pxa/time.c due to the sys_timer
cleanup.

* clocksource/cleanup:
  clocksource: use clockevents_config_and_register() where possible
  ARM: use clockevents_config_and_register() where possible
  clockevents: export clockevents_config_and_register for module use
  + sync to Linux 3.8-rc3

Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-pxa/time.c
2013-01-14 10:20:02 -08:00
Rob Herring
9e47b8bf98 irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h
Now that we have VIC moved to drivers/irqchip and all VIC DT init for
platforms using irqchip_init, move gic.h and update the remaining
includes.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Rubini <rubini@unipv.it>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: STEricsson <STEricsson_nomadik_linux@list.st.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
2013-01-12 10:52:16 -06:00
Rob Herring
2cb003c57e ARM: remove unneeded vic.h includes
Numerous includes of asm/hardware/vic.h aren't needed, so remove them.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Hubert Feurstein <hubert.feurstein@contec.at>
Cc: Alessandro Rubini <rubini@unipv.it>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: STEricsson <STEricsson_nomadik_linux@list.st.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Acked-By: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-samsung-soc@vger.kernel.org
Cc: patches@opensource.wolfsonmicro.com
Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-12 10:51:59 -06:00
Rob Herring
a036802913 ARM: remove mach .handle_irq for VIC users
Now that the VIC initialization sets up the handle_arch_irq pointer, we
can remove it for all machines and make it static. Move vic_handle_irq
to avoid a forward declaration.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Hubert Feurstein <hubert.feurstein@contec.at>
Cc: Alessandro Rubini <rubini@unipv.it>
Cc: STEricsson <STEricsson_nomadik_linux@list.st.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-12 10:48:04 -06:00
Shawn Guo
b632a30e8b ARM: remove unused arch_decomp_wdog()
With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c,
all the arch_decomp_wdog() definition at platform level is unneeded.
Remmove it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
2013-01-11 10:54:03 +08:00
Linus Walleij
f556529589 ARM: 7610/1: versatile: bump IRQ numbers
The Versatile starts to register Linux IRQ numbers from offset 0
which is illegal, since this is NO_IRQ. Bump all hard-coded IRQs
by 32 to get rid of the problem.

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-02 10:35:06 +00:00
Stephen Warren
6bb27d7349 ARM: delete struct sys_timer
Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.

This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.html

Includes mach-omap2 fixes from Igor Grinberg.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24 09:36:38 -07:00
Linus Walleij
2389d50143 ARM: plat-versatile: move FPGA irq driver to drivers/irqchip
This moves the Versatile FPGA interrupt controller driver, used in
the Integrator/AP, Integrator/CP and some Versatile boards, out
of arch/arm/plat-versatile and down to drivers/irqchip where we
have consensus that such drivers belong. The header file is
consequently moved to <linux/platform_data/irq-versatile-fpga.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-04 18:09:12 +01:00
Russell King
b1b3f49ce4 ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:

  This is a pet peeve of mine.  Any time there's a long list of items
  (header file inclusions, kconfig entries, array initalisers, etc) and
  someone wants to add a new item, they *always* go and stick it at the
  end of the list.

  Guys, don't do this.  Either put the new item into a randomly-chosen
  position or, probably better, alphanumerically sort the list.

lets sort all our select statements alphanumerically.  This commit was
created by the following perl:

while (<>) {
	while (/\\\s*$/) {
		$_ .= <>;
	}
	undef %selects if /^\s*config\s+/;
	if (/^\s+select\s+(\w+).*/) {
		if (defined($selects{$1})) {
			if ($selects{$1} eq $_) {
				print STDERR "Warning: removing duplicated $1 entry\n";
			} else {
				print STDERR "Error: $1 differently selected\n".
					"\tOld: $selects{$1}\n".
					"\tNew: $_\n";
				exit 1;
			}
		}
		$selects{$1} = $_;
		next;
	}
	if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
			  /^endif/ or /^endchoice/)) {
		foreach $k (sort (keys %selects)) {
			print "$selects{$k}";
		}
		undef %selects;
	}
	print;
}
if (%selects) {
	foreach $k (sort (keys %selects)) {
		print "$selects{$k}";
	}
}

It found two duplicates:

Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry

and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.

We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)

Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-13 17:11:28 +01:00
Linus Torvalds
9cd11c0c47 ARM: soc: multiplatform enablement
This is a pretty significant branch. It's the introduction of the
 first multiplatform support on ARM, and with this (and the later
 branch) merged, it is now possible to build one kernel that contains
 support for highbank, vexpress, mvebu, socfpga, and picoxcell. More
 platforms will be convered over in the next few releases.
 
 Two critical last things had to be done for this to be practical and
 possible:
 * Today each platform has its own include directory under
   mach-<mach>/include/mach/*, and traditionally that is where a lot of
   driver/platform shared definitions have gone, such as platform data
   structures. They now need to move out to a common location instead,
   and this branch moves a large number of those out to
   include/linux/platform_data.
 * Each platform used to list the device trees to compile for its
   boards in mach-<mach>/Makefile.boot.
 
 Both of the above changes will mean that there are some merge
 conflicts to come (and some to resolve here). It's a one-time move and
 once it settles in, we should be good for quite a while. Sorry for the
 overhead.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql
 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB
 i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm
 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr
 KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py
 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU
 P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ
 obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ
 Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw
 cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9
 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6
 K5TCDS2v5hrVykK9TDwl
 =Tc6y
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...
2012-10-01 19:11:38 -07:00
Linus Torvalds
8f446a7a06 ARM: soc: driver specific changes
- A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO48AAoJEIwa5zzehBx3excP/ieEkRhvfnWxdYST6ekvGIQr
 nEyskOh2rVjgYKmSXUJyKSbvG+7bZ8VIxvPvojeAJ/R84pTFMzbR2F0CaPKzAuSW
 inDt6c0Bnx1NZlfUTAoXcz7feyq9zHYNs9BCLoPU0bYNchCCqcWSKzqnpXk2ph/P
 LFnmNa0j6a4E3QJYAjM2zFvc3Tgk+MWTq1fWwNFvsWTh2WbQtmB/iGnzT5Xs4XQh
 u1SSx5tz0lcF5zQRGmJhXgL5+nnIP4sRwRUBAkpe3Gv5cM6WBVEBRDANa5QpbUL2
 RXK5YyCTIln2Me4bPk32zEBLjiZ/WXbmiA2uwoqVgy6XToubemDXd0PtKmjj5tZ1
 BkTD1DND7BKBEQnJj/GBECEdvx2FbrKfruoPcJHvXPZ7Svn5Dt/MWYJQIkRFkuhL
 zlVNoDGWlU8nScGrgmTM56UvWmGWC3UFsWSgdVQNfW9yEva+G1FvRUwUH02Ip5Ad
 4r28JFIn6zyjtM99ZHipU6C6Rze2ordC7fl5X5LBLkVOobioblxCAhIhcqkhfKsk
 rFriNsdfYs7SrJA7mK7GzvaMEJgp/5o1noJKXI7ZBcLI8yYagzbQbPu/vGi6G6d3
 0xC7NaTEJbtoXoDAtmtilLRxmw0YCXgVBBGua0K2YKpcRwnzCHNbV4gsLMnDuOXS
 HP4M96LxLHJlLGCxhEme
 =ck7M
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc driver specific changes from Olof Johansson:
 - A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer

Fix up conflicts as per Olof.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: bus: omap_l3: use resources instead of hardcoded irqs
  pinctrl: exynos: Fix wakeup IRQ domain registration check
  pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
  pinctrl: exynos: Correct the detection of wakeup-eint node
  pinctrl: exynos: Mark exynos_irq_demux_eint as inline
  pinctrl: exynos: Handle only unmasked wakeup interrupts
  pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
  pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
  drivers: bus: Move the OMAP interconnect driver to drivers/bus/
  i2c: tegra: dynamically control fast clk
  i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
  ARM: tegra: clock: remove unused clock entry for i2c
  ARM: tegra: clock: add connection name in i2c clock entry
  i2c: tegra: pass proper name for getting clock
  ARM: tegra: clock: add i2c fast clock entry in clock table
  ARM: EXYNOS: Adds G-Scaler device from Device Tree
  ARM: EXYNOS: Add clock support for G-Scaler
  ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
  ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
  ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
  ...
2012-10-01 18:46:13 -07:00
Olof Johansson
5ae8d15f68 Enable initial ARM multi-platform support for highbank, mvebu,
socfpga, picoxcell, and vexpress.
 
 Multi-platform support is dependent on mach/gpio.h removal and
 restructuring of DEBUG_LL and dtb build rules included in this branch.
 
 This has been built for all defconfigs, and booted on highbank with
 all 5 platforms enabled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg
 nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z
 hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei
 cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA
 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt
 JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME=
 =HR3H
 -----END PGP SIGNATURE-----

Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform

Enable initial ARM multi-platform support for highbank, mvebu,
socfpga, picoxcell, and vexpress.

Multi-platform support is dependent on mach/gpio.h removal and
restructuring of DEBUG_LL and dtb build rules included in this branch.

This has been built for all defconfigs, and booted on highbank with
all 5 platforms enabled.

By Rob Herring (18) and Arnd Bergmann (1)
via Rob Herring
* tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux:
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ARM: orion: move custom gpio functions to orion-gpio.h
  ARM: shmobile: move custom gpio functions to sh-gpio.h
  ARM: pxa: use gpio_to_irq for sharppm_sl
  net: pxaficp_ir: add irq resources
  usb: pxa27x_udc: remove IRQ_USB define
  staging: ste_rmi4: remove gpio.h include

Conflicts due to addition of bcm2835 and removal of pnx4008 in:
	arch/arm/Kconfig
	arch/arm/Makefile

Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in:
	arch/arm/mach-imx/Makefile.boot
	arch/arm/mach-mxs/Makefile.boot
	arch/arm/mach-tegra/Makefile.boot

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20 22:54:07 -07:00
Rob Herring
01464226ac ARM: make mach/gpio.h headers optional
Most platforms don't need mach/gpio.h and it prevents multi-platform
kernel images. Add CONFIG_NEED_MACH_GPIO_H and make platforns select it
if they need gpio.h. This is platforms that define __GPIOLIB_COMPLEX
or have lots of implicit includes pulled in by mach/gpio.h.

at91 and omap have gpio clean-up pending and can drop
CONFIG_NEED_MACH_GPIO_H once that is in.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-14 09:21:59 -05:00
Bryan Wu
e031cd513e ARM: mach-realview and mach-versatile: retire custom LED code
This replaces the custom LED trigger code in mach-realview with
some overarching platform code for the plat-versatile family that
will lock down LEDs 2 thru 5 for CPU activity indication. The
day we have 8 core ARM systems the plat-versatile code will have
to become more elaborate.

Tested on RealView PB11MPCore by invoking four different CPU
hogs (yes > /dev/null&) and see the LEDs go on one at a time.
They all go off as the hogs are killed. Tested on the PB1176
as well - just one activity led (led 2) goes on and off with
CPU activity.

(bryan.wu@canonical.com: use ledtrig-cpu instead of ledtrig-arm-cpu)

Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-08-01 11:22:04 +08:00
Rob Herring
fe50517542 ARM: versatile: use fixed PCI i/o mapping
Move versatile PCI to fixed i/o mapping and remove io.h.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2012-07-26 09:09:56 -05:00
Russell King
32e1eb59f7 ARM: fix mach-versatile/pci.c warning
arch/arm/mach-versatile/pci.c: In function 'versatile_map_irq':
arch/arm/mach-versatile/pci.c:342: warning: unused variable 'devslot'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-04 17:04:57 +01:00
Arnd Bergmann
9b0f7e3992 arm: versatile: fix and enable PCI I/O space
With commit 4d5fc58dbe (ARM: remove bunch of now unused
mach/io.h files), the I/O space setup was completely broken on
versatile. This patch fixes that and prepares for further
I/O space clean-up.

I/O space handling on the versatile platform is currently
broken in multiple ways. Most importantly, the ports do
not get mapped into the virtual address space at all.

Also, there is some amount of confusion between PCI I/O
space and other statically mapped MMIO registers in the
platform code:

* The __io_address() macro that is used to access the
  platform register maps to the same __io macro that gets
  used for I/O space.

* The IO_SPACE_LIMIT is set to a value that is much larger
  than the total available space.

* The I/O resource of the PCI bus is set to the physical
  address of the mapping, which is way outside of the
  actual I/O space limit as well as the address range that
  gets decoded by traditional PCI cards.

* No attempt is made to stay outside of the ISA port range
  that some device drivers try access.

* No resource gets requested as a child of ioport_resource,
  but an IORESOURCE_IO type mapping gets requested
  as a child of iomem_resource.

This patch attempts to correct all of the above. This makes
it possible to use virtio-pci based virtual devices as well
as actual PCI cards including those with legacy ISA port
ranges like VGA.

Some of the issues seem to be duplicated on other platforms.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[rob: update to 3.5-rc2 and io.h cleanup related changes]
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Tested-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-16 18:41:35 -07:00
Russell King
ddf90a2ff2 Merge branches 'amba', 'devel-stable', 'fixes', 'mach-types', 'mmci', 'pci' and 'versatile' into for-linus 2012-05-21 15:15:10 +01:00
Russell King
c23bfc3835 ARM: PCI: provide a default bus scan implementation
Most PCI implementations perform simple root bus scanning.  Rather than
having each group of platforms provide a duplicated bus scan function,
provide the PCI configuration ops structure via the hw_pci structure,
and call the root bus scanning function from core ARM PCI code.

Acked-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-13 17:12:17 +01:00
Russell King
daeb4c0c3b ARM: PCI: get rid of pci_std_swizzle()
Most PCI implementations use the standard PCI swizzle function, which
handles the well defined behaviour of PCI-to-PCI bridges which can be
found on cards (eg, four port ethernet cards.)

Rather than having almost every platform specify the standard swizzle
function, make this the default when no swizzle function is supplied.
Therefore, a swizzle function only needs to be provided when there is
something exceptional which needs to be handled.

This gets rid of the swizzle initializer from 47 files, and leaves us
with just two platforms specifying a swizzle function: ARM Integrator
and Chalice CATS.

Acked-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-13 17:12:16 +01:00
Russell King
1bc39ac5da ARM: PCI: versatile: fix PCI interrupt setup
This is at odds with the documentation in the file; it says pin 1 on
slots 24,25,26,27 map to IRQs 27,28,29,30, but the function will always
be entered with slot=0 due to the lack of swizzle function.  Fix this
function to behave as the comments say, and use the standard PCI
swizzle.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-13 17:12:16 +01:00
Linus Walleij
d12379acaf ARM: 7391/1: versatile: add some auxdata for device trees
The MMCI and PL022 SPI drivers sure need their platform data to
work on the Versatile as well. (This does not fix the auxdata for
MMCI instance mmc1 on the Versatile PB though.)

Cc: Niklas Hernaeus <niklas.hernaeus@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-04 16:53:37 +01:00
Linus Walleij
3108e6ab21 ARM: 7389/2: plat-versatile: modernize FPGA IRQ controller
This does two things to the FPGA IRQ controller in the versatile
family:

- Convert to MULTI_IRQ_HANDLER so we can drop the entry macro
  from the Integrator. The C IRQ handler was inspired from
  arch/arm/common/vic.c, recent bug discovered in this handler was
  accounted for.
- Convert to using IRQ domains so we can get rid of the NO_IRQ
  mess and proceed with device tree and such stuff.

As part of the exercise, bump all the low IRQ numbers on the
Integrator PIC to start from 1 rather than 0, since IRQ 0 is
now NO_IRQ. The Linux IRQ numbers are thus entirely decoupled
from the hardware IRQ numbers in this controller.

I was unable to split this patch. The main reason is the half-done
conversion to device tree in Versatile.

Tested on Integrator/AP and Integrator/CP.

Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-04 16:53:37 +01:00
Paul Gortmaker
ee5324ea33 ARM: versatile: fix build failure in pci.c
commit 9f786d033d

    "arm/PCI: get rid of device resource fixups"

causes this failure on the versatile:

arch/arm/mach-versatile/pci.c: In function 'pci_versatile_setup_resources':
arch/arm/mach-versatile/pci.c:221: error: 'sys' undeclared (first use in this function)

because the versatile wasn't passing in the full struct pci_sys_data
but only the resource sub-field.  Change it to pass in the full
struct so that sys will be in scope.

Reported-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-02 22:03:35 -07:00
Linus Torvalds
820d41cf0c ARM: cleanups of io includes
Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes,
 moving some of the oft-repeated macros to a common location and removing a bunch of
 boiler plate. This is another step closer to a common zImage for multiple platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPcpqHAAoJEIwa5zzehBx3xCMP/2evrPQyorzMBztrFB4Ry9Ol
 qNkSVNsemZjdtkY2dnJv+zJ/Xb0PPDU9EuBHr/SpqmVrRZEZeJND42wZK/OTFCBZ
 Ufi7KP1qE30daO5H3YmL+58/Ixir5fTHqggqolHhTcEYU2hnHgLBI4rIFu92kSO7
 TMyrAUs14jSkTVZc6HSF83w3PfQWhMzWvspJVHQ6RebZRruETAr7v9weVMbgxcDk
 jQ5XJ9y73rGs2AF8bZTpUdFPzkcac7UiHn3/XyqoZs8RNCL98BGpskzhILyTARf5
 X90c9mqQF+AEbb9QSDDd52uYFsJ/5COJvWdlExRI9gZZDI8Pd05ijZBR9IdGJg/B
 NsVsl98wvZ/zjHJ/Sb2qt5ruet7PiQUGhkshB42jVHsaWfRM030sKGYxQ8pX5Tsa
 cSagnfBCvAZ9VjDLkXrnEbWRNTz8LSwn9l63z0jmtm5D8+vbpMtgvtWARtuZ4RNn
 D8wIWoyT0ytVZnosu5441TEgCejtcKOEFzThvKDYMeMJZ/rqVkAbcznapoC2qUd4
 fceNlLfQFvW7xpY1MY8mhlwC0ki4hM9MSDieaXUyefvAU/hoSp8MveVUH5UspYfb
 0FpkEhzklW/g0/fuq0DJQIrMn7dajjUvVZIUQtiVQuFHOr6RUbFG5vmXuCbAyx10
 PE2K4rnKz+PC8bKab7v9
 =YIsn
 -----END PGP SIGNATURE-----

Merge tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: cleanups of io includes" from Olof Johansson:
 "Rob Herring has done a sweeping change cleaning up all of the
  mach/io.h includes, moving some of the oft-repeated macros to a common
  location and removing a bunch of boiler plate.  This is another step
  closer to a common zImage for multiple platforms."

Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes
around it, tegra localtimer.o is *still* gone, yadda-yadda).

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: tegra: Include assembler.h in sleep.S to fix build break
  ARM: pxa: use common IOMEM definition
  ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol
  ARM: __io abuse cleanup
  ARM: create a common IOMEM definition
  ARM: iop13xx: fix missing declaration of iop13xx_init_early
  ARM: fix ioremap/iounmap for !CONFIG_MMU
  ARM: kill off __mem_pci
  ARM: remove bunch of now unused mach/io.h files
  ARM: make mach/io.h include optional
  ARM: clps711x: remove unneeded include of mach/io.h
  ARM: dove: add explicit include of dove.h to addr-map.c
  ARM: at91: add explicit include of hardware.h to uncompressor
  ARM: ep93xx: clean-up mach/io.h
  ARM: tegra: clean-up mach/io.h
  ARM: orion5x: clean-up mach/io.h
  ARM: davinci: remove unneeded mach/io.h include
  [media] davinci: remove includes of mach/io.h
  ARM: OMAP: Remove remaining includes for mach/io.h
  ARM: msm: clean-up mach/io.h
  ...
2012-03-29 18:02:10 -07:00
Linus Torvalds
0195c00244 Disintegrate and delete asm/system.h
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00
David Howells
9f97da78bf Disintegrate asm/system.h for ARM
Disintegrate asm/system.h for ARM.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Russell King <linux@arm.linux.org.uk>
cc: linux-arm-kernel@lists.infradead.org
2012-03-28 18:30:01 +01:00
Linus Torvalds
56c10bf82c Merge branch 'for-armsoc' of git://git.linaro.org/people/rmk/linux-arm
Pull #1 ARM updates from Russell King:
 "This one covers stuff which Arnd is waiting for me to push, as this is
  shared between both our trees and probably other trees elsewhere.

  Essentially, this contains:
   - AMBA primecell device initializer updates - mostly shrinking the
     size of the device declarations in platform code to something more
     reasonable.
   - Getting rid of the NO_IRQ crap from AMBA primecell stuff.
   - Nicolas' idle cleanups.  This in combination with the restart
     cleanups from the last merge window results in a great many
     mach/system.h files being deleted."

Yay: ~80 files, ~2000 lines deleted.

* 'for-armsoc' of git://git.linaro.org/people/rmk/linux-arm: (60 commits)
  ARM: remove disable_fiq and arch_ret_to_user macros
  ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLER
  ARM: rpc: make default fiq handler run-time installed
  ARM: make arch_ret_to_user macro optional
  ARM: amba: samsung: use common amba device initializers
  ARM: amba: spear: use common amba device initializers
  ARM: amba: nomadik: use common amba device initializers
  ARM: amba: u300: use common amba device initializers
  ARM: amba: lpc32xx: use common amba device initializers
  ARM: amba: netx: use common amba device initializers
  ARM: amba: bcmring: use common amba device initializers
  ARM: amba: ep93xx: use common amba device initializers
  ARM: amba: omap2: use common amba device initializers
  ARM: amba: integrator: use common amba device initializers
  ARM: amba: realview: get rid of private platform amba_device initializer
  ARM: amba: versatile: get rid of private platform amba_device initializer
  ARM: amba: vexpress: get rid of private platform amba_device initializer
  ARM: amba: provide common initializers for static amba devices
  ARM: amba: make use of -1 IRQs warn
  ARM: amba: u300: get rid of NO_IRQ initializers
  ...
2012-03-23 17:30:49 -07:00
Linus Torvalds
475c77edf8 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci
Pull PCI changes (including maintainer change) from Jesse Barnes:
 "This pull has some good cleanups from Bjorn and Yinghai, as well as
  some more code from Yinghai to better handle resource re-allocation
  when enabled.

  There's also a new initcall_debug feature from Arjan which will print
  out quirk timing information to help identify slow quirks for fixing
  or refinement (Yinghai sent in a few patches to do just that once the
  new debug code landed).

  Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas.
  He's been a core PCI and Linux contributor for some time now, and has
  kindly volunteered to take over.  I just don't feel I have the time
  for PCI review and work that it deserves lately (I've taken on some
  other projects), and haven't been as responsive lately as I'd like, so
  I approached Bjorn asking if he'd like to manage things.  He's going
  to give it a try, and I'm confident he'll do at least as well as I
  have in keeping the tree managed, patches flowing, and keeping things
  stable."

Fix up some fairly trivial conflicts due to other cleanups (mips device
resource fixup cleanups clashing with list handling cleanup, ppc iseries
removal clashing with pci_probe_only cleanup etc)

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits)
  PCI: Bjorn gets PCI hotplug too
  PCI: hand PCI maintenance over to Bjorn Helgaas
  unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h
  sparc/PCI: convert devtree and arch-probed bus addresses to resource
  powerpc/PCI: allow reallocation on PA Semi
  powerpc/PCI: convert devtree bus addresses to resource
  powerpc/PCI: compute I/O space bus-to-resource offset consistently
  arm/PCI: don't export pci_flags
  PCI: fix bridge I/O window bus-to-resource conversion
  x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()'
  PCI / PCIe: Introduce command line option to disable ARI
  PCI: make acpihp use __pci_remove_bus_device instead
  PCI: export __pci_remove_bus_device
  PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge
  PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device
  PCI: print out PCI device info along with duration
  PCI: Move "pci reassigndev resource alignment" out of quirks.c
  PCI: Use class for quirk for usb host controller fixup
  PCI: Use class for quirk for ti816x class fixup
  PCI: Use class for quirk for intel e100 interrupt fixup
  ...
2012-03-23 14:02:12 -07:00
Rob Herring
4d5fc58dbe ARM: remove bunch of now unused mach/io.h files
Now that many platforms don't need mach/io.h, remove the unused ones.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
2012-03-06 21:34:44 -06:00
Bjorn Helgaas
9f786d033d arm/PCI: get rid of device resource fixups
Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23 20:19:01 -07:00
Russell King
61b80086a5 Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kernel/linux into for-armsoc 2012-02-22 22:04:41 +00:00
Rob Herring
230f984662 ARM: remove disable_fiq and arch_ret_to_user macros
Now that most platforms don't need disable_fiq and arch_ret_to_user
macros, we can remove the empty macros or empty entry-macro.S files.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-21 17:05:18 -06:00
Grant Likely
75294957be irq_domain: Remove 'new' irq_domain in favour of the ppc one
This patch removes the simplistic implementation of irq_domains and enables
the powerpc infrastructure for all irq_domain users.  The powerpc
infrastructure includes support for complex mappings between Linux and
hardware irq numbers, and can manage allocation of irq_descs.

This patch also converts the few users of irq_domain_add()/irq_domain_del()
to call irq_domain_add_legacy() instead.

v3: Fix bug that set up too many irqs in translation range.
v2: Fix removal of irq_alloc_descs() call in gic driver

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
2012-02-16 06:11:23 -07:00
Russell King
dcf81c1af8 Merge branch 'amba' into for-armsoc 2012-01-26 19:59:44 +00:00