and using ranged values to allow better compatibility with regulator
steps), gpu opps on px30, infrared receiver on rockpro64,
USB3 support on rk3328, MMC alias fixups, dt-compatible fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmByvnMQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdga73B/9EvLxu08VwgERaPs1n6XrjpDwfid7u9ops
wi5/bLqeBK4Jrg7jrlN1snwzfqnqPeDe2amZyi1CwCnPJNmloIkMIdLtSwIdc2ws
85O8Oa3Yus3boRh+bQ67F8vP6QNNfu0u9q5Nqe3cQhp/R8PaCZy1gVVjX4ZJiFz8
qmcPsI92czrlK0zcjWU7LfIzYVUZ/XPKTcBDkpQb1wPJ2/j6mHz4a4XXrfltLtKJ
P1XpseI4YqIFt77cZV0bpeO49/wq5UX6KSdYDdpYzO9e8FUPT6Khhc4CpApsIxyY
QgHPe6pgJj/KZHI8/Qo9I0nLjxNTJXmad0FNIBvinuyATv2zSt4M
=Zu51
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rockchip-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New board the NanoPi R4S, OPP adjustments on rk3399 (sync with vendor
and using ranged values to allow better compatibility with regulator
steps), gpu opps on px30, infrared receiver on rockpro64,
USB3 support on rk3328, MMC alias fixups, dt-compatible fixes.
* tag 'v5.13-rockchip-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: move mmc aliases to board dts on rk3399
arm64: dts: rockchip: move mmc aliases to board dts on rk3368
arm64: dts: rockchip: move mmc aliases to board dts on rk3328
arm64: dts: rockchip: move mmc aliases to board dts on rk3308
arm64: dts: rockchip: move mmc aliases to board dts on px30
arm64: dts: rockchip: add new watchdog compatible to rk3399.dtsi
arm64: dts: rockchip: add new watchdog compatible to rk3328.dtsi
arm64: dts: rockchip: add new watchdog compatible to rk3308.dtsi
arm64: dts: rockchip: add new watchdog compatible to px30.dtsi
arm64: dts: rockchip: enable dwc3 usb for A95X Z2
arm64: dts: rockchip: add rk3328 dwc3 usb controller node
rockchip: rk3399: Add support for FriendlyARM NanoPi R4S
dt-bindings: Add doc for FriendlyARM NanoPi R4S
arm64: dts: rockchip: add phandle to timer0 on rk3368
arm64: dts: rockchip: add infrared receiver node to rockpro64
arm64: dts: rockchip: drop separate opp table on rk3399-puma
arm64: dts: rockchip: used range'd gpu opps on rk3399
arm64: dts: rockchip: synchronize rk3399 opps with vendor kernel
arm64: dts: rockchip: Add gpu opp nodes to px30 dtsi
Link: https://lore.kernel.org/r/2191862.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix the etm node hex address to lower case for matching regexp
specification and removing the additional warning that looks like:
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dt.yaml: /: 'etm@73C000' does not
match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$',
'pinctrl-[0-9]+'
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-7-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-6-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-5-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-4-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
For the Engicam-boards this means a split as the core
boards contains the emmc while the commit baseboard handles
sdmmc and sdio.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-3-heiko@sntech.de
As suggested by Arnd Bergmann, mmc-aliases are supposed to be
board-specific, so move the newly added general aliases to
the board-level on rv1108-based boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-2-heiko@sntech.de
As suggested by Arnd Bergmann, mmc-aliases are supposed to be
board-specific, so move the newly added general aliases to
the board-level on rk322x-based boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-1-heiko@sntech.de
This adds RPMh regulators, coresight, AOSS qmp, ipcc, llcc for the
SC7280. It adds interconnect, PRNG and thermal pieces to SM8350. It
specifies the now required clocks for the SDM845 gcc, corrects the
firmware-name for adsp and cdsp on the db845c and defines DSI and panel
bits for Xiaomi Pocophone F1.
SM8150 gains iommu settings and the remaining I2C controllers and SM8250
gains Venus and the QMP PHY is updated to include the DP portion.
It adds the MSM8998 based OnePlus 5/5T device and enables sound support
on the Trogdor device family.
Lastly it adds the GIC hypervisor registers & interrupt for when Linux
is booted in EL2 on MSM8916.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmBwgw4bHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FWXoQAKpPf+oQc+wVvoGCk35T
Xq5MFxJvm69Ad2TjCgRkyKrb1Op02PlrzJT5CNTt8d2OZjiLH4VZnv6b6e5z8sEA
1PbAID09tCLxE6j2KV6RCt4L9JGslT6eQ2HQWCCIjte8ygI3meyjjsGr3j1BJcJM
0GdLp1UTvlcItQcVymf6OLw0z69hvNuOiEAaQ1BNF+Y9VRhM940nS35D/0vhZpdQ
fP8aeCslAnu020g88P0uJESEsCQPLjywBHK2JlyYmzZzr9/OZnJvETUG6fkMjxQ/
TnJiuaGBDk//yhULYxt0t2Xi1gK76snkTLKx09p6a/GBIyNgTUW7MdEPw3n14FL9
cuFpFTZTTKw0HtaHtu2HtM/WFlBE92XlWKSKTfsVI/qR9LJn+6p6Ewi61evsg04U
+z8RI+rOD/lOXbU6VtYbdPE7wTkNk4+vTTPzAWSsNr7GtuGoNR3Qb693PwV2gsdl
BgkxR5sZDZAesa7tfpeZnB57fOq3N9iZHbdQWx/JaEyvou24LjHchWQv8o0xN8Av
P67PlfMM6tqt5jFSs8aLp9C6bsZjkzX4OnhP7p6ah39YlR6/pNh32pk74+DSspF2
e/XyH4gO0zTJ6DgPozPBz70epH5ToDXQQEbcKQ+huFUtSOjNDdlrSKouGPcRufIn
c8fgySvA9ChVIFwxju9+/Urs
=7juS
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM64 DT updates for 5.13
This adds RPMh regulators, coresight, AOSS qmp, ipcc, llcc for the
SC7280. It adds interconnect, PRNG and thermal pieces to SM8350. It
specifies the now required clocks for the SDM845 gcc, corrects the
firmware-name for adsp and cdsp on the db845c and defines DSI and panel
bits for Xiaomi Pocophone F1.
SM8150 gains iommu settings and the remaining I2C controllers and SM8250
gains Venus and the QMP PHY is updated to include the DP portion.
It adds the MSM8998 based OnePlus 5/5T device and enables sound support
on the Trogdor device family.
Lastly it adds the GIC hypervisor registers & interrupt for when Linux
is booted in EL2 on MSM8916.
* tag 'qcom-arm64-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (25 commits)
arm64: dts: qcom: update usb qmp phy clock-cells property
arm64: dts: qcom: msm8916: Add GICv2 hypervisor registers/interrupt
arm64: dts: sdm845-db845c: make firmware filenames follow linux-firmware
arm64: dts: qcom: sdm845-xiaomi-beryllium: Add DSI and panel bits
arm64: dts: qcom: sc7280: Add Coresight support
arm64: dts: qcom: sc7280: Add AOSS QMP node
arm64: dts: qcom: sc7280: Add IPCC for SC7280 SoC
arm64: dts: qcom: sc7280: Add device tree node for LLCC
arm64: dts: qcom: Add support for OnePlus 5/5T
arm64: dts: qcom: msm8998: Disable MSS remoteproc by default
arm64: dts: qcom: Move rmtfs memory region
arm64: dts: qcom: Add sound node for sc7180-trogdor-coachz
arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for I2S driver
arm64: dts: qcom: use dp_phy to provide clocks to dispcc
arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode
arm64: dts: qcom: sm8250: Add venus DT node
arm64: dts: qcom: sm8250: Add videocc DT node
arm64: dts: qcom: sm8350: Add interconnects
arm64: dts: qcom: sm8350: Add support for PRNG EE
arm64: dts: qcom: sc7280: Add RPMh regulators for sc7280-idp
...
Link: https://lore.kernel.org/r/20210409163949.776530-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds Bluetooth support on the Samsung Galaxy S5, corrects the mount
matrix for the IMU on Nexus 5 and corrects the fuel gauge irq trigger
for the two devices.
-----BEGIN PGP SIGNATURE-----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=M5GB
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm dts updates for v5.13
This adds Bluetooth support on the Samsung Galaxy S5, corrects the mount
matrix for the IMU on Nexus 5 and corrects the fuel gauge irq trigger
for the two devices.
* tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974-klte: Add bluetooth support
ARM: dts: qcom: msm8974: add blsp2_uart8
ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger level
ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level
ARM: dts: qcom: msm8974-hammerhead: add mount matrix for IMU
Link: https://lore.kernel.org/r/20210409162359.776076-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The kernelci.org bot reports a build time regression:
arch/arm/boot/dts/ep7209.dtsi:187.17-192.4: Warning (interrupts_property): /keypad: Missing interrupt-parent
There is only one interrupt controller in this SoC, so I assume this
is the parent.
Fixes: 2bd86203ac ("ARM: dts: clps711x: Add keypad node")
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dtc warns about a mismatched address:
arch/arm/boot/dts/armada-385-atl-x530.dts:171.14-199.4: Warning (spi_bus_reg): /soc/spi@10680/spi-flash@0: SPI bus unit address format error, expected "1"
I assume the "reg" property is correct here, so adjust the unit address
accordingly.
Fixes: c6dfc019c2 ("ARM: dts: mvebu: Add device tree for ATL-x530 Board")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for ATL-x530 Board (Armada 38x based)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCYG4XpAAKCRALBhiOFHI7
1ZoaAKCte3+j+CRoH3fBgBRTd5aIOBHd/QCeO8D+KkqxlnjVSo3XDt32cZQWq20=
=xk5y
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.13 (part 1)
Add support for ATL-x530 Board (Armada 38x based)
* tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: mvebu: Add device tree for ATL-x530 Board
Link: https://lore.kernel.org/r/87v98xbzir.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The top-level node doesn't provide any clocks, the subnode provides a
single clock with of_clk_hw_simple_get.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20201123143705.14277-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The ARM Cortex-A53 CPU cores and QGIC2 interrupt controller
(an implementation of the ARM GIC 2.0 specification) used in MSM8916
support virtualization, e.g. for KVM on Linux. However, so far it was
not possible to make use of this functionality, because Qualcomm's
proprietary "hyp" firmware blocks the EL2 mode of the CPU and only
allows booting Linux in EL1.
However, on devices without (firmware) secure boot there is no need
to rely on all of Qualcomm's firmware. The "hyp" firmware on MSM8916
seems simple enough that it can be replaced with an open-source
alternative created only based on trial and error - with some similar
EL2/EL1 initialization code adapted from Linux and U-Boot.
qhypstub [1] is such an open-source firmware for MSM8916 that
can be used as drop-in replacement for Qualcomm's "hyp" firmware.
It does not implement any hypervisor functionality.
Instead, it allows booting Linux/KVM (or other hypervisors) in EL2.
With Linux booting in EL2, KVM seems to be working just fine on MSM8916.
However, so far it is not possible to make use of the virtualization
features in the GICv2. To use KVM's VGICv2 code, the QGIC2 device tree
node needs additional resources (according to binding documentation):
- The CPU interface region (second reg) must be at least 8 KiB large
to access the GICC_DIR register (mapped at 0x1000 offset)
- Virtual control/CPU interface register base and size
- Hypervisor maintenance interrupt
Fortunately, the public APQ8016E TRM [2] provides the required information:
- The CPU interface region (at 0x0B002000) actually has a size of 8 KiB
- Virtual control/CPU interface register is at 0x0B001000/0x0B004000
- Hypervisor maintenance interrupt is "PPI #0"
Note: This is a bit strange since almost all other ARM SoCs use
GIC_PPI 9 for this. However, I have verified that this is
indeed the interrupt that fires when bits are set in GICH_HCR.
Add the additional resources to the QGIC2 device tree node in msm8916.dtsi.
There is no functional difference when Linux is started in EL1 since the
additional resources are ignored in that case.
With these changes (and qhypstub), KVM seems to be fully working on
the DragonBoard 410c (apq8016-sbc) and BQ Aquaris X5 (longcheer-l8910).
[1]: https://github.com/msm8916-mainline/qhypstub
[2]: https://developer.qualcomm.com/download/sd410/snapdragon-410e-technical-reference-manual.pdf
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210407163648.4708-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Name the GPIOs to help userspace work with them. The names describe the
functionality the lines provide, not the net or ball name. This makes it
easier to share userspace code across different systems and makes the
use of the lines more obvious.
Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210330020808.830-1-Nichole_Wang@wistron.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The 1S4U version of the Rainier system has only 4 fans. Create a new
tree, include the 4U version, and delete the 2 extra fans.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-23-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT
pin of the MAX31785, resulting in fans running at full speed, if at
any point the BMC stops pulsing it, such as a BMC reboot at runtime.
Enable watchdog 2 for BMC reboots.
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-21-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This commit adds support for-
- Presence GPIOs
- I2C control GPIOs
- Op-panel GPIOs (ex PHR)
Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210329150020.13632-19-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the i2c/pmbus power supply devices to the everest device tree.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-17-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the pca9552 at address 0x61 on i2c14 behind mux0 channel 3 with the
4 GPIO fan presence inputs.
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210329150020.13632-16-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add additional CFAMs and re-number the existing engines for the
extra processors present on the Everest system.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-15-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the max31785 configuration at address 0x52 on i2c14 behind mux0
channel 3.
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-14-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested and able to bound the devices with i2c driver.
Signed-off-by: Priyanga Ramasamy <priyanga24@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-13-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The 4U fans didn't have the correct properties since the fan nodes
were redefined. Fix this by referencing each fan individually and
adding the differences to the 4U fans.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-12-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT
pin of the MAX31785, resulting in fans running at full speed, if at
any point the BMC stops pulsing it, such as a BMC reboot at runtime.
Enable watchdog 2 for BMC reboots.
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-11-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This commit adds presence detect GPIO chips for various FRUs on
Rainier. Also, correct the I2C address for the tca9554.
Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-10-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Rainier has two dual-chip modules and therefore four CFAMs with their
associated engines. Add these to the devicetree with the i2c busses
that have devices on them.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-5-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add a gpio-keys-polled section to the Rainier device tree for the fan
presence signals on the PCA9552 I2C device on bus 7.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-4-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
These LEDs are directly connected to the BMC's GPIO bank.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
mini-ITX board that we hope can provide a decent platform for OpenBMC
development.
This initial device-tree provides the necessary configuration for
basic BMC functionality such as host power control, serial console and
KVM support, and POST code snooping.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add device tree file for x530 board. This has an Armada 385 SoC. Has
NAND-flash for user storage and SPI for booting. Covers majority of x530
and GS980MX variants.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
- two little fixes (typo, W=1)
- a change in gpio button keycode for recent boards
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYG2aoQAKCRAfOrpwrNPN
DAJQAP9r4FW4jrde3KaAhzlY+H/SYLN9Vi4LGha5pgF9mT7P1wEAiUdT9TDFoWxF
154HT95ZCBHgJE9xCENm/8EWQYirjgg=
=A/Wn
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 dt for 5.13:
- two little fixes (typo, W=1)
- a change in gpio button keycode for recent boards
* tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2: add ETB and ETM unit name
ARM: dts: at91: change the key code of the gpio key
ARM: dts: at91: Fix a typo
Link: https://lore.kernel.org/r/20210407114415.13180-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-4-christianshewitt@gmail.com
Add the meson saradc node to the ODROID N2/N2+ common dtsi.
Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-3-christianshewitt@gmail.com
Remove an extra tab from the ext_mdio node in the ODROID N2/N2+ common
dtsi file.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-2-christianshewitt@gmail.com
1. Configure battery charger and front camera on GT-I9100 phone.
2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags
to match real type of interrupt coming from the device.
3. Correct DTS with dtschema. This brings back the commit adding input
clock to CMU in Exynos4412 Odroid which was reverted some time ago
due to unsupported deferred probes (now supported and tested).
-----BEGIN PGP SIGNATURE-----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=5sWm
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.13
1. Configure battery charger and front camera on GT-I9100 phone.
2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags
to match real type of interrupt coming from the device.
3. Correct DTS with dtschema. This brings back the commit adding input
clock to CMU in Exynos4412 Odroid which was reverted some time ago
due to unsupported deferred probes (now supported and tested).
* tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add front camera support to I9100
ARM: dts: exynos: white-space cleanups
ARM: dts: exynos: replace deprecated NTC/Murata compatibles
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family
ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family
ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family
ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100
ARM: dts: exynos: add charger supply for I9100
Link: https://lore.kernel.org/r/20210407065828.7213-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Mostly configures addtional devices for various boards, and
updates the gpio line names for beagle boards so userspace can
optionally find the right lines:
- Use unique gpio line names for am335x-pocketbeagle
- Update omap3-echo led configuration and add ath6kl node
- Fix indentation for am3 tscadc node
- Prepare motorola-cpcap-mapphone for power supply dtbs_check_parsing
- Use unique gpio line names for am335x-boneblack.dts
-----BEGIN PGP SIGNATURE-----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=xF+N
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.13
Mostly configures addtional devices for various boards, and
updates the gpio line names for beagle boards so userspace can
optionally find the right lines:
- Use unique gpio line names for am335x-pocketbeagle
- Update omap3-echo led configuration and add ath6kl node
- Fix indentation for am3 tscadc node
- Prepare motorola-cpcap-mapphone for power supply dtbs_check_parsing
- Use unique gpio line names for am335x-boneblack.dts
* tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-boneblack.dts: unique gpio-line-names
ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsing
ARM: dts: am33xx-l4: fix tscadc@0 node indentation
ARM: dts: omap3-echo: Add ath6kl node
ARM: dts: omap3-echo: Update LED configuration
ARM: dts: am335x-pocketbeagle: unique gpio-line-names
Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
