When doing a direct IO write against a file range that either has
preallocated extents in that range or has regular extents and the file
has the NOCOW attribute set, the write fails with -ENOSPC when all of
the following conditions are met:
1) There are no data blocks groups with enough free space matching
the size of the write;
2) There's not enough unallocated space for allocating a new data block
group;
3) The extents in the target file range are not shared, neither through
snapshots nor through reflinks.
This is wrong because a NOCOW write can be done in such case, and in fact
it's possible to do it using a buffered IO write, since when failing to
allocate data space, the buffered IO path checks if a NOCOW write is
possible.
The failure in direct IO write path comes from the fact that early on,
at btrfs_dio_iomap_begin(), we try to allocate data space for the write
and if it that fails we return the error and stop - we never check if we
can do NOCOW. But later, at btrfs_get_blocks_direct_write(), we check
if we can do a NOCOW write into the range, or a subset of the range, and
then release the previously reserved data space.
Fix this by doing the data reservation only if needed, when we must COW,
at btrfs_get_blocks_direct_write() instead of doing it at
btrfs_dio_iomap_begin(). This also simplifies a bit the logic and removes
the inneficiency of doing unnecessary data reservations.
The following example test script reproduces the problem:
$ cat dio-nocow-enospc.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
# Use a small fixed size (1G) filesystem so that it's quick to fill
# it up.
# Make sure the mixed block groups feature is not enabled because we
# later want to not have more space available for allocating data
# extents but still have enough metadata space free for the file writes.
mkfs.btrfs -f -b $((1024 * 1024 * 1024)) -O ^mixed-bg $DEV
mount $DEV $MNT
# Create our test file with the NOCOW attribute set.
touch $MNT/foobar
chattr +C $MNT/foobar
# Now fill in all unallocated space with data for our test file.
# This will allocate a data block group that will be full and leave
# no (or a very small amount of) unallocated space in the device, so
# that it will not be possible to allocate a new block group later.
echo
echo "Creating test file with initial data..."
xfs_io -c "pwrite -S 0xab -b 1M 0 900M" $MNT/foobar
# Now try a direct IO write against file range [0, 10M[.
# This should succeed since this is a NOCOW file and an extent for the
# range was previously allocated.
echo
echo "Trying direct IO write over allocated space..."
xfs_io -d -c "pwrite -S 0xcd -b 10M 0 10M" $MNT/foobar
umount $MNT
When running the test:
$ ./dio-nocow-enospc.sh
(...)
Creating test file with initial data...
wrote 943718400/943718400 bytes at offset 0
900 MiB, 900 ops; 0:00:01.43 (625.526 MiB/sec and 625.5265 ops/sec)
Trying direct IO write over allocated space...
pwrite: No space left on device
A test case for fstests will follow, testing both this direct IO write
scenario as well as the buffered IO write scenario to make it less likely
to get future regressions on the buffered IO case.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events in
'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYdHBrgAKCRCyPKLppCJ+
J8C0AQDT9JKQlNPMETD5F2leq0YB5O3wGKwMvgff0hyblArU7QD/Yq7d1XgMkshF
lb2dEJfGIyClnrgtTo9nikraESM5JwE=
=RTLi
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events
in 'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf top: Fix TUI exit screen refresh race condition
perf pmu: Fix alias events list
perf scripts python: intel-pt-events.py: Fix printing of switch events
perf script: Fix CPU filtering of a script's switch events
perf intel-pt: Fix parsing of VM time correlation arguments
perf expr: Fix return value of ids__new()
Pull i2c fixes from Wolfram Sang:
"Better input validation for compat ioctls and a documentation bugfix
for 5.16"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Docs: Fixes link to I2C specification
i2c: validate user data in compat ioctl
-----BEGIN PGP SIGNATURE-----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=mJVP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Use the proper CONFIG symbol in a preprocessor check.
* tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Use the proper name CONFIG_FW_LOADER
When the following command is executed several times, a coredump file is
generated.
$ timeout -k 9 5 perf top -e task-clock
*******
*******
*******
0.01% [kernel] [k] __do_softirq
0.01% libpthread-2.28.so [.] __pthread_mutex_lock
0.01% [kernel] [k] __ll_sc_atomic64_sub_return
double free or corruption (!prev) perf top --sort comm,dso
timeout: the monitored command dumped core
When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.
However SLsmg_reinit_smg() maybe be called by another thread.
SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.
SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: wuxu.wu@huawei.com
Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.com
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: yaowenbin <yaowenbin1@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 0e0ae87422 ("perf list: Display hybrid PMU events with cpu
type") changes the event list for uncore PMUs or arm64 heterogeneous CPU
systems, such that duplicate aliases are incorrectly listed per PMU
(which they should not be), like:
# perf list
...
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
...
Notice how the events are listed twice.
The named commit changed how we remove duplicate events, in that events
for different PMUs are not treated as duplicates. I suppose this is to
handle how "Each hybrid pmu event has been assigned with a pmu name".
Fix PMU alias listing by restoring behaviour to remove duplicates for
non-hybrid PMUs.
Fixes: 0e0ae87422 ("perf list: Display hybrid PMU events with cpu type")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull input fixes from Dmitry Torokhov:
"Two small fixups for spaceball joystick driver and appletouch touchpad
driver"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: spaceball - fix parsing of movement data packets
Input: appletouch - initialize work before device registration
Hugh Dickins reported the following
My tmpfs swapping load (tweaked to use huge pages more heavily
than in real life) is far from being a realistic load: but it was
notably slowed down by your throttling mods in 5.16-rc, and this
patch makes it well again - thanks.
But: it very quickly hit NULL pointer until I changed that last
line to
if (first_pgdat)
consider_reclaim_throttle(first_pgdat, sc);
The likely issue is that huge pages are a major component of the test
workload. When this is the case, first_pgdat may never get set if
compaction is ready to continue due to this check
if (IS_ENABLED(CONFIG_COMPACTION) &&
sc->order > PAGE_ALLOC_COSTLY_ORDER &&
compaction_ready(zone, sc)) {
sc->compaction_ready = true;
continue;
}
If this was true for every zone in the zonelist, first_pgdat would never
get set resulting in a NULL pointer exception.
Link: https://lkml.kernel.org/r/20211209095453.GM3366@techsingularity.net
Fixes: 1b4e3f26f9 ("mm: vmscan: Reduce throttling due to a failure to make progress")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar
problems due to reclaim throttling for excessive lengths of time. In
Alexey's case, a memory hog that should go OOM quickly stalls for
several minutes before stalling. In Mike and Darrick's cases, a small
memcg environment stalled excessively even though the system had enough
memory overall.
Commit 69392a403f ("mm/vmscan: throttle reclaim when no progress is
being made") introduced the problem although commit a19594ca4a
("mm/vmscan: increase the timeout if page reclaim is not making
progress") made it worse. Systems at or near an OOM state that cannot
be recovered must reach OOM quickly and memcg should kill tasks if a
memcg is near OOM.
To address this, only stall for the first zone in the zonelist, reduce
the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if
the scan control nr_reclaimed is 0, kswapd is still active and there
were excessive pages pending for writeback. If kswapd has stopped
reclaiming due to excessive failures, do not stall at all so that OOM
triggers relatively quickly. Similarly, if an LRU is simply congested,
only lightly throttle similar to NOPROGRESS.
Alexey's original case was the most straight forward
for i in {1..3}; do tail /dev/zero; done
On vanilla 5.16-rc1, this test stalled heavily, after the patch the test
completes in a few seconds similar to 5.15.
Alexey's second test case added watching a youtube video while tail runs
10 times. On 5.15, playback only jitters slightly, 5.16-rc1 stalls a
lot with lots of frames missing and numerous audio glitches. With this
patch applies, the video plays similarly to 5.15.
[lkp@intel.com: Fix W=1 build warning]
Link: https://lore.kernel.org/r/99e779783d6c7fce96448a3402061b9dc1b3b602.camel@gmx.de
Link: https://lore.kernel.org/r/20211124011954.7cab9bb4@mail.inbox.lv
Link: https://lore.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lore.kernel.org/r/20211202150614.22440-1-mgorman@techsingularity.net
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/20211124011954.7cab9bb4@mail.inbox.lv/
Reported-and-tested-by: Alexey Avramov <hakavlad@inbox.lv>
Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Reported-and-tested-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Tracked-by: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes: 69392a403f ("mm/vmscan: throttle reclaim when no progress is being made")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge misc mm fixes from Andrew Morton:
"2 patches.
Subsystems affected by this patch series: mm (userfaultfd and damon)"
* akpm:
mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
userfaultfd/selftests: fix hugetlb area allocations
Three fixes, all in drivers. The lpfc one doesn't look exploitable,
but nasty things could happen in string operations if mybuf ends up
with an on stack unterminated string.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYc8YLiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUhAQCVmqLx
GhEK15Y8etJwMoj03I6hO5gChhQz6kk7pxXAVwD/e5LHrVVeq/WxjUnyrC1gx6sm
iYHYbZ0UHotwbRpwU9k=
=WAIf
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes, all in drivers. The lpfc one doesn't look exploitable,
but nasty things could happen in string operations if mybuf ends up
with an on stack unterminated string"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: vmw_pvscsi: Set residual data length conditionally
scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
DAMON debugfs interface increases the reference counts of 'struct pid's
for targets from the 'target_ids' file write callback
('dbgfs_target_ids_write()'), but decreases the counts only in DAMON
monitoring termination callback ('dbgfs_before_terminate()').
Therefore, when 'target_ids' file is repeatedly written without DAMON
monitoring start/termination, the reference count is not decreased and
therefore memory for the 'struct pid' cannot be freed. This commit
fixes this issue by decreasing the reference counts when 'target_ids' is
written.
Link: https://lkml.kernel.org/r/20211229124029.23348-1-sj@kernel.org
Fixes: 4bc05954d0 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh
or any environment where there are 'just enough' hugetlb pages will
always fail with:
testing events (fork, remap, remove):
ERROR: UFFDIO_COPY error: -12 (errno=12, line=616)
The ENOMEM error code implies there are not enough hugetlb pages.
However, there are free hugetlb pages but they are all reserved. There
is a basic problem with the way the test allocates hugetlb pages which
has existed since the test was originally written.
Due to the way 'cleanup' was done between different phases of the test,
this issue was masked until recently. The issue was uncovered by commit
8ba6e86408 ("userfaultfd/selftests: reinitialize test context in each
test").
For the hugetlb test, src and dst areas are allocated as PRIVATE
mappings of a hugetlb file. This means that at mmap time, pages are
reserved for the src and dst areas. At the start of event testing (and
other tests) the src area is populated which results in allocation of
huge pages to fill the area and consumption of reserves associated with
the area. Then, a child is forked to fault in the dst area. Note that
the dst area was allocated in the parent and hence the parent owns the
reserves associated with the mapping. The child has normal access to
the dst area, but can not use the reserves created/owned by the parent.
Thus, if there are no other huge pages available allocation of a page
for the dst by the child will fail.
Fix by not creating reserves for the dst area. In this way the child
can use free (non-reserved) pages.
Also, MAP_PRIVATE of a file only makes sense if you are interested in
the contents of the file before making a COW copy. The test does not do
this. So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous
hugetlb mapping. There is no need to create a hugetlb file in the
non-shared case.
Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The link to the I2C specification is broken. Although
"https://www.nxp.com" hosts Rev 7 (2021) of this specification, it is
behind a login-wall. Thus, an additional link has been added (which
doesn't require a login) and the NXP official docs link has been
updated.
Signed-off-by: Deep Majumder <deep@fastmail.in>
[wsa: minor updates to text and commit message]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Wrong user data may cause warning in i2c_transfer(), ex: zero msgs.
Userspace should not be able to trigger warnings, so this patch adds
validation checks for user data in compact ioctl to prevent reported
warnings
Reported-and-tested-by: syzbot+e417648b303855b91d8a@syzkaller.appspotmail.com
Fixes: 7d5cb45655 ("i2c compat ioctls: move to ->compat_ioctl()")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The spaceball.c module was not properly parsing the movement reports
coming from the device. The code read axis data as signed 16-bit
little-endian values starting at offset 2.
In fact, axis data in Spaceball movement reports are signed 16-bit
big-endian values starting at offset 3. This was determined first by
visually inspecting the data packets, and later verified by consulting:
http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf
If this ever worked properly, it was in the time before Git...
Signed-off-by: Leo L. Schwab <ewhac@ewhac.org>
Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Syzbot has reported warning in __flush_work(). This warning is caused by
work->func == NULL, which means missing work initialization.
This may happen, since input_dev->close() calls
cancel_work_sync(&dev->work), but dev->work initalization happens _after_
input_register_device() call.
So this patch moves dev->work initialization before registering input
device
Fixes: 5a6eb676d3 ("Input: appletouch - improve powersaving for Geyser3 devices")
Reported-and-tested-by: syzbot+b88c5eae27386b252bbd@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
nouveau:
- fencing regression fix
i915:
- Fix possible uninitialized variable
- Fix composite fence seqno icrement on each fence creation
amdgpu:
- Fencing fix
- XGMI fix
- VCN regression fix
- IP discovery regression fixes
- Fix runpm documentation
- Suspend/resume fixes
- Yellow Carp display fixes
- MCLK power management fix
- dma-buf fix
-----BEGIN PGP SIGNATURE-----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=WRy6
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-12-31' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is a bit bigger than I'd like, however it has two weeks of amdgpu
fixes in it, since they missed last week, which was very small.
The nouveau regression is probably the biggest fix in here, and it
needs to go into 5.15 as well, two i915 fixes, and then a scattering
of amdgpu fixes. The biggest fix in there is for a fencing NULL
pointer dereference, the rest are pretty minor.
For the misc team, I've pulled the two misc fixes manually since I'm
not sure what is happening at this time of year!
The amdgpu maintainers have the outstanding runpm regression to fix
still, they are just working through the last bits of it now.
Summary:
nouveau:
- fencing regression fix
i915:
- Fix possible uninitialized variable
- Fix composite fence seqno icrement on each fence creation
amdgpu:
- Fencing fix
- XGMI fix
- VCN regression fix
- IP discovery regression fixes
- Fix runpm documentation
- Suspend/resume fixes
- Yellow Carp display fixes
- MCLK power management fix
- dma-buf fix"
* tag 'drm-fixes-2021-12-31' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Fix USB4 null pointer dereference in update_psp_stream_config
drm/amd/display: Set optimize_pwr_state for DCN31
drm/amd/display: Send s0i2_rdy in stream_count == 0 optimization
drm/amd/display: Added power down for DCN10
drm/amd/display: fix B0 TMDS deepcolor no dislay issue
drm/amdgpu: no DC support for headless chips
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amdgpu: always reset the asic in suspend (v2)
drm/amd/pm: skip setting gfx cgpg in the s0ix suspend-resume
drm/i915: Increment composite fence seqno
drm/i915: Fix possible uninitialized variable in parallel extension
drm/amdgpu: fix runpm documentation
drm/nouveau: wait for the exclusive fence after the shared ones v2
drm/amdgpu: add support for IP discovery gc_info table v2
drm/amdgpu: When the VCN(1.0) block is suspended, powergating is explicitly enabled
drm/amd/pm: Fix xgmi link control on aldebaran
drm/amdgpu: introduce new amdgpu_fence object to indicate the job embedded fence
drm/amdgpu: fix dropped backing store handling in amdgpu_dma_buf_move_notify
This merges two fixes that haven't been sent to me yet, but I wanted to get in.
One amdgpu fix, but one nouveau regression fixer.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Make sure that finish_mount_kattr() is called after mount_kattr was
succesfully built in both the success and failure case to prevent
leaking any references we took when we built it. We returned early if
path lookup failed thereby risking to leak an additional reference we
took when building mount_kattr when an idmapped mount was requested.
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 9caccd4154 ("fs: introduce MOUNT_ATTR_IDMAP")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current release - regressions:
- xsk: initialise xskb free_list_node, fixup for a -rc7 fix
Current release - new code bugs:
- mlx5: handful of minor fixes:
- use first online CPU instead of hard coded CPU
- fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
- fix skb memory leak when TC classifier action offloads are
disabled
- fix memory leak with rules with internal OvS port
Previous releases - regressions:
- igc: do not enable crosstimestamping for i225-V models
Previous releases - always broken:
- udp: use datalen to cap ipv6 udp max gso segments
- fix use-after-free in tw_timer_handler due to early free of stats
- smc: fix kernel panic caused by race of smc_sock
- smc: don't send CDC/LLC message if link not ready, avoid timeouts
- sctp: use call_rcu to free endpoint, avoid UAF in sock diag
- bridge: mcast: add and enforce query interval minimum
- usb: pegasus: do not drop long Ethernet frames
- mlx5e: fix ICOSQ recovery flow for XSK
- nfc: uapi: use kernel size_t to fix user-space builds
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ucH7
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from.. Santa?
No regressions on our radar at this point. The igc problem fixed here
was the last one I was tracking but it was broken in previous
releases, anyway. Mostly driver fixes and a couple of largish SMC
fixes.
Current release - regressions:
- xsk: initialise xskb free_list_node, fixup for a -rc7 fix
Current release - new code bugs:
- mlx5: handful of minor fixes:
- use first online CPU instead of hard coded CPU
- fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
- fix skb memory leak when TC classifier action offloads are disabled
- fix memory leak with rules with internal OvS port
Previous releases - regressions:
- igc: do not enable crosstimestamping for i225-V models
Previous releases - always broken:
- udp: use datalen to cap ipv6 udp max gso segments
- fix use-after-free in tw_timer_handler due to early free of stats
- smc: fix kernel panic caused by race of smc_sock
- smc: don't send CDC/LLC message if link not ready, avoid timeouts
- sctp: use call_rcu to free endpoint, avoid UAF in sock diag
- bridge: mcast: add and enforce query interval minimum
- usb: pegasus: do not drop long Ethernet frames
- mlx5e: fix ICOSQ recovery flow for XSK
- nfc: uapi: use kernel size_t to fix user-space builds"
* tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
fsl/fman: Fix missing put_device() call in fman_port_probe
selftests: net: using ping6 for IPv6 in udpgro_fwd.sh
Documentation: fix outdated interpretation of ip_no_pmtu_disc
net/ncsi: check for error return from call to nla_put_u32
net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper
net: fix use-after-free in tw_timer_handler
selftests: net: Fix a typo in udpgro_fwd.sh
selftests/net: udpgso_bench_tx: fix dst ip argument
net: bridge: mcast: add and enforce startup query interval minimum
net: bridge: mcast: add and enforce query interval minimum
ipv6: raw: check passed optlen before reading
xsk: Initialise xskb free_list_node
net/mlx5e: Fix wrong features assignment in case of error
net/mlx5e: TC, Fix memory leak with rules with internal port
ionic: Initialize the 'lif->dbid_inuse' bitmap
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
net/smc: fix kernel panic caused by race of smc_sock
net/smc: don't send CDC/LLC message if link not ready
NFC: st21nfca: Fix memory leak in device probe and remove
...
Here are two misc driver fixes for 5.16-final:
- binder accounting fix to resolve reported problem
- nitro_enclaves fix for mmap assert warning output
Both of these have been for over a week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYc3i1w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynYBgCgvqxG0Ykl3G/RG55U2fSZlWJuLfsAoKZBCt+6
BTSCwLhNQvJ5fI6BHFkK
=3nNc
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are two misc driver fixes for 5.16-final:
- binder accounting fix to resolve reported problem
- nitro_enclaves fix for mmap assert warning output
Both of these have been for over a week with no reported issues"
* tag 'char-misc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert
binder: fix async_free_space accounting for empty parcels
Here are some small USB driver fixes for 5.16 to resolve some reported
problems:
- mtu3 driver fixes
- typec ucsi driver fix
- xhci driver quirk added
- usb gadget f_fs fix for reported crash
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYc3jlA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymbwgCfbEHPGRtOsbEFFiJugbKhVHCi0w8An0CHzzTB
3nEwm+l4BUkUcvqTxc7A
=95Py
-----END PGP SIGNATURE-----
Merge tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.16 to resolve some reported
problems:
- mtu3 driver fixes
- typec ucsi driver fix
- xhci driver quirk added
- usb gadget f_fs fix for reported crash
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Only check the contract if there is a connection
xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.
usb: mtu3: set interval of FS intr and isoc endpoint
usb: mtu3: fix list_head check warning
usb: mtu3: add memory barrier before set GPD's HWO
usb: mtu3: fix interval value for intr and isoc
usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the and error handling paths.
Fixes: 18a6c85fcc ("fsl/fman: Add FMan Port Support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
udpgro_fwd.sh output following message:
ping: 2001:db8:1:💯 Address family for hostname not supported
Using ping6 when pinging IPv6 addresses.
Fixes: a062260a9d ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The updating way of pmtu has changed, but documentation is still in the
old way. So this patch updates the interpretation of ip_no_pmtu_disc and
min_pmtu.
See commit 28d35bcdd3 ("net: ipv4: don't let PMTU updates increase
route MTU")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmHMA2sACgkQSD+KveBX
+j4EmAgArIcwFde37gGKqwW/alEWohligk7KN5QiJDFZ9HrzpTEQp9vCZ/JV5TeC
1ySaW/34gUrhPPM2brgAY+ZdYeIu1tApmmKTHAbzCFn44viShqxjH8nJUYKZtqeu
sAATmR059Ap1Zsb6y74u6jy5qUD2/dkkjDlaNBYoYmkTeKKg+Jkt56tE0lVLAhn2
PMsd8VO459KUor+0HJoXHEzurHRvitLlK5d7QsYPaiKEdCJ/ZE6NNABXVuMZf5KU
gHQcmjH1jy2X722bs92u1ykHOPmDCFDB9ltnR2mLfRhtPglbGhAVL1A8paEvRwy+
tVssgIIt6PG74SOV5DuJFOH970CjpA==
=00nz
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2021-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-12-28
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2021-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix wrong features assignment in case of error
net/mlx5e: TC, Fix memory leak with rules with internal port
====================
Link: https://lore.kernel.org/r/20211229065352.30178-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drm/i915 fixes for v5.16:
- Fix possible uninitialized variable
- Fix composite fence seqno icrement on each fence creation
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87h7ark5r5.fsf@intel.com
As we can see from the comment of the nla_put() that it could return
-EMSGSIZE if the tailroom of the skb is insufficient.
Therefore, it should be better to check the return value of the
nla_put_u32 and return the error code if error accurs.
Also, there are many other functions have the same problem, and if this
patch is correct, I will commit a new version to fix all.
Fixes: 955dc68cb9 ("net/ncsi: Add generic netlink family")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to first check if the context is a vlan one, then we need to
check the global bridge multicast vlan snooping flag, and finally the
vlan's multicast flag, otherwise we will unnecessarily enable vlan mcast
processing (e.g. querier timers).
Fixes: 7b54aaaf53 ("net: bridge: multicast: add vlan state initialization and control")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20211228153142.536969-1-nikolay@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A real world panic issue was found as follow in Linux 5.4.
BUG: unable to handle page fault for address: ffffde49a863de28
PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0
RIP: 0010:tw_timer_handler+0x20/0x40
Call Trace:
<IRQ>
call_timer_fn+0x2b/0x120
run_timer_softirq+0x1ef/0x450
__do_softirq+0x10d/0x2b8
irq_exit+0xc7/0xd0
smp_apic_timer_interrupt+0x68/0x120
apic_timer_interrupt+0xf/0x20
This issue was also reported since 2017 in the thread [1],
unfortunately, the issue was still can be reproduced after fixing
DCCP.
The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net
namespace is destroyed since tcp_sk_ops is registered befrore
ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops
in the list of pernet_list. There will be a use-after-free on
net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net
if there are some inflight time-wait timers.
This bug is not introduced by commit f2bf415cfe ("mib: add net to
NET_ADD_STATS_BH") since the net_statistics is a global variable
instead of dynamic allocation and freeing. Actually, commit
61a7e26028 ("mib: put net statistics on struct net") introduces
the bug since it put net statistics on struct net and free it when
net namespace is destroyed.
Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug
and replace pr_crit() with panic() since continuing is meaningless
when init_ipv4_mibs() fails.
[1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1
Fixes: 61a7e26028 ("mib: put net statistics on struct net")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211228104145.9426-1-songmuchun@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.
This will cause test case "multiple GRO socks" failed in udpgro.sh.
Setup sockaddr after parsing all arguments.
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit in Fixes intends to add the expression regex only when FW_LOADER
is enabled - not FW_LOADER_BUILTIN. Latter is a leftover from a previous
patchset and not a valid config item.
So, adjust the condition to the actual name of the config.
[ bp: Cleanup commit message. ]
Fixes: c8dcf655ec ("x86/build: Tuck away built-in firmware under FW_LOADER")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211229111553.5846-1-lukas.bulwahn@gmail.com
Nikolay Aleksandrov says:
====================
net: bridge: mcast: add and enforce query interval minimum
This set adds and enforces 1 second minimum value for bridge multicast
query and startup query intervals in order to avoid rearming the timers
too often which could lock and crash the host. I doubt anyone is using
such low values or anything lower than 1 second, so it seems like a good
minimum. In order to be compatible if the value is lower then it is
overwritten and a log message is emitted, since we can't return an error
at this point.
Eric, I looked for the syzbot reports in its dashboard but couldn't find
them so I've added you as the reporter.
I've prepared a global bridge igmp rate limiting patch but wasn't
sure if it's ok for -net. It adds a static limit of 32k packets per
second, I plan to send it for net-next with added drop counters for
each bridge so it can be easily debugged.
Original report can be seen at:
https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/
====================
Link: https://lore.kernel.org/r/20211227172116.320768-1-nikolay@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As reported[1] if startup query interval is set too low in combination with
large number of startup queries and we have multiple bridges or even a
single bridge with multiple querier vlans configured we can crash the
machine. Add a 1 second minimum which must be enforced by overwriting the
value if set lower (i.e. without returning an error) to avoid breaking
user-space. If that happens a log message is emitted to let the admin know
that the startup interval has been set to the minimum. It doesn't make
sense to make the startup interval lower than the normal query interval
so use the same value of 1 second. The issue has been present since these
intervals could be user-controlled.
[1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/
Fixes: d902eee43f ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As reported[1] if query interval is set too low and we have multiple
bridges or even a single bridge with multiple querier vlans configured
we can crash the machine. Add a 1 second minimum which must be enforced
by overwriting the value if set lower (i.e. without returning an error) to
avoid breaking user-space. If that happens a log message is emitted to let
the administrator know that the interval has been set to the minimum.
The issue has been present since these intervals could be user-controlled.
[1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/
Fixes: d902eee43f ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a check that the user-provided option is at least as long as the
number of bytes we intend to read. Before this patch we would blindly
read sizeof(int) bytes even in cases where the user passed
optlen<sizeof(int), which would potentially read garbage or fault.
Discovered by new tests in https://github.com/google/gvisor/pull/6957 .
The original get_user call predates history in the git repo.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211229200947.2862255-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit initialises the xskb's free_list_node when the xskb is
allocated. This prevents a potential false negative returned from a call
to list_empty for that node, such as the one introduced in commit
199d983bc0 ("xsk: Fix crash on double free in buffer pool")
In my environment this issue caused packets to not be received by
the xdpsock application if the traffic was running prior to application
launch. This happened when the first batch of packets failed the xskmap
lookup and XDP_PASS was returned from the bpf program. This action is
handled in the i40e zc driver (and others) by allocating an skbuff,
freeing the xdp_buff and adding the associated xskb to the
xsk_buff_pool's free_list if it hadn't been added already. Without this
fix, the xskb is not added to the free_list because the check to determine
if it was added already returns an invalid positive result. Later, this
caused allocation errors in the driver and the failure to receive packets.
Fixes: 199d983bc0 ("xsk: Fix crash on double free in buffer pool")
Fixes: 2b43470add ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20211220155250.2746-1-ciara.loftus@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of an error in mlx5e_set_features(), 'netdev->features' must be
updated with the correct state of the device to indicate which features
were updated successfully.
To do that we maintain a copy of 'netdev->features' and update it after
successful feature changes, so we can assign it to back to
'netdev->features' if needed.
However, since not all netdev features are handled by the driver (e.g.
GRO/TSO/etc), some features may not be updated correctly in case of an
error updating another feature.
For example, while requesting to disable TSO (feature which is not
handled by the driver) and enable HW-GRO, if an error occurs during
HW-GRO enable, 'oper_features' will be assigned with 'netdev->features'
and HW-GRO turned off. TSO will remain enabled in such case, which is a
bug.
To solve that, instead of using 'netdev->features' as the baseline of
'oper_features' and changing it on set feature success, use 'features'
instead and update it in case of errors.
Fixes: 75b81ce719 ("net/mlx5e: Don't override netdev features field unless in error flow")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fix a memory leak with decap rule with internal port as destination
device. The driver allocates a modify hdr action but doesn't set
the flow attr modify hdr action which results in skipping releasing
the modify hdr action when releasing the flow.
backtrace:
[<000000005f8c651c>] krealloc+0x83/0xd0
[<000000009f59b143>] alloc_mod_hdr_actions+0x156/0x310 [mlx5_core]
[<000000002257f342>] mlx5e_tc_match_to_reg_set_and_get_id+0x12a/0x360 [mlx5_core]
[<00000000b44ea75a>] mlx5e_tc_add_fdb_flow+0x962/0x1470 [mlx5_core]
[<0000000003e384a0>] __mlx5e_add_fdb_flow+0x54c/0xb90 [mlx5_core]
[<00000000ed8b22b6>] mlx5e_configure_flower+0xe45/0x4af0 [mlx5_core]
[<00000000024f4ab5>] mlx5e_rep_indr_offload.isra.0+0xfe/0x1b0 [mlx5_core]
[<000000006c3bb494>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
[<00000000d3dac2ea>] tc_setup_cb_add+0x1d2/0x420
Fixes: b16eb3c81f ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-28
This series contains updates to igc driver only.
Vinicius disables support for crosstimestamp on i225-V as lockups are being
observed.
James McLaughlin fixes Tx timestamping support on non-MSI-X platforms.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
====================
Link: https://lore.kernel.org/r/20211228182421.340354-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When allocated, this bitmap is not initialized. Only the first bit is set a
few lines below.
Use bitmap_zalloc() to make sure that it is cleared before being used.
Fixes: 6461b446f2 ("ionic: Add interrupts and doorbells")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/6a478eae0b5e6c63774e1f0ddb1a3f8c38fa8ade.1640527506.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Why]
A porting error on a previous patch left the block of code that
causes the crash from a NULL pointer dereference.
More specifically, we try to access link_enc before it's assigned in
the USB4 case in the following assignment:
config.dio_output_idx = link_enc->transmitter - TRANSMITTER_UNIPHY_A;
[How]
That assignment occurs later depending on the ASIC version. It's only
needed on DCN31 and only after link_enc is already assigned.
Fixes: 986430446c ("drm/amd/display: fix a crash on USB4 over C20 PHY")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We'll exit optimized power state to do link detection but we won't enter
back into the optimized power state.
This could potentially block s2idle entry depending on the sequencing,
but it also means we're losing some power during the transition period.
[How]
Hook up the handler like DCN21. It was also missed like the
exit_optimized_pwr_state callback.
Fixes: 64b1d0e8d5 ("drm/amd/display: Add DCN3.1 HWSEQ")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Otherwise SMU won't mark Display as idle when trying to perform s2idle.
[How]
Mark the bit in the dcn31 codepath, doesn't apply to older ASIC.
It needed to be split from phy refclk off to prevent entering s2idle
when PSR was engaged but driver was not ready.
Fixes: 118a331516 ("drm/amd/display: Add DCN3.1 clock manager support")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
