Commit graph

183 commits

Author SHA1 Message Date
Tetsuo Handa
701188374b kernel/sys.c: fix missing rcu protection for sys_getpriority()
find_task_by_vpid() is not safe without rcu_read_lock().  2.6.33-rc7 got
RCU protection for sys_setpriority() but missed it for sys_getpriority().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-22 19:50:34 -08:00
Linus Torvalds
10e5453ffa Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sys: Fix missing rcu protection for __task_cred() access
  signals: Fix more rcu assumptions
  signal: Fix racy access to __task_cred in kill_pid_info_as_uid()
2009-12-19 09:47:34 -08:00
H Hartley Sweeten
dfc6a736d4 kernel/sys.c: fix "warning: do-while statement is not a compound statement" noise
do_each_thread/while_each_thread wrap a block of code that is in this format:

	for (...)
		do
			...
		while

If curly braces do not surround the inner loop the following warning is
generated by sparse:

	warning: do-while statement is not a compound statement

Fix the warning by adding the braces.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:26 -08:00
Thomas Gleixner
d4581a239a sys: Fix missing rcu protection for __task_cred() access
commit c69e8d9 (CRED: Use RCU to access another task's creds and to
release a task's own creds) added non rcu_read_lock() protected access
to task creds of the target task in set_prio_one().

The comment above the function says:
 * - the caller must hold the RCU read lock

The calling code in sys_setpriority does read_lock(&tasklist_lock) but
not rcu_read_lock(). This works only when CONFIG_TREE_PREEMPT_RCU=n.
With CONFIG_TREE_PREEMPT_RCU=y the rcu_callbacks can run in the tick
interrupt when they see no read side critical section.

There is another instance of __task_cred() in sys_setpriority() itself
which is equally unprotected.

Wrap the whole code section into a rcu read side critical section to
fix this quick and dirty.

Will be revisited in course of the read_lock(&tasklist_lock) -> rcu
crusade.

Oleg noted further:

This also fixes another bug here. find_task_by_vpid() is not safe
without rcu_read_lock(). I do not mean it is not safe to use the
result, just find_pid_ns() by itself is not safe.

Usually tasklist gives enough protection, but if copy_process() fails
it calls free_pid() lockless and does call_rcu(delayed_put_pid().
This means, without rcu lock find_pid_ns() can't scan the hash table
safely.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20091210004703.029784964@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2009-12-10 23:04:11 +01:00
Linus Torvalds
3b8ecd2244 Merge branch 'bkl-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'bkl-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sys: Remove BKL from sys_reboot
  pm_qos: clean up racy global "name" variable
  pm_qos: remove BKL
2009-12-09 08:07:17 -08:00
Hidetoshi Seto
0cf55e1ec0 sched, cputime: Introduce thread_group_times()
This is a real fix for problem of utime/stime values decreasing
described in the thread:

   http://lkml.org/lkml/2009/11/3/522

Now cputime is accounted in the following way:

 - {u,s}time in task_struct are increased every time when the thread
   is interrupted by a tick (timer interrupt).

 - When a thread exits, its {u,s}time are added to signal->{u,s}time,
   after adjusted by task_times().

 - When all threads in a thread_group exits, accumulated {u,s}time
   (and also c{u,s}time) in signal struct are added to c{u,s}time
   in signal struct of the group's parent.

So {u,s}time in task struct are "raw" tick count, while
{u,s}time and c{u,s}time in signal struct are "adjusted" values.

And accounted values are used by:

 - task_times(), to get cputime of a thread:
   This function returns adjusted values that originates from raw
   {u,s}time and scaled by sum_exec_runtime that accounted by CFS.

 - thread_group_cputime(), to get cputime of a thread group:
   This function returns sum of all {u,s}time of living threads in
   the group, plus {u,s}time in the signal struct that is sum of
   adjusted cputimes of all exited threads belonged to the group.

The problem is the return value of thread_group_cputime(),
because it is mixed sum of "raw" value and "adjusted" value:

  group's {u,s}time = foreach(thread){{u,s}time} + exited({u,s}time)

This misbehavior can break {u,s}time monotonicity.
Assume that if there is a thread that have raw values greater
than adjusted values (e.g. interrupted by 1000Hz ticks 50 times
but only runs 45ms) and if it exits, cputime will decrease (e.g.
-5ms).

To fix this, we could do:

  group's {u,s}time = foreach(t){task_times(t)} + exited({u,s}time)

But task_times() contains hard divisions, so applying it for
every thread should be avoided.

This patch fixes the above problem in the following way:

 - Modify thread's exit (= __exit_signal()) not to use task_times().
   It means {u,s}time in signal struct accumulates raw values instead
   of adjusted values.  As the result it makes thread_group_cputime()
   to return pure sum of "raw" values.

 - Introduce a new function thread_group_times(*task, *utime, *stime)
   that converts "raw" values of thread_group_cputime() to "adjusted"
   values, in same calculation procedure as task_times().

 - Modify group's exit (= wait_task_zombie()) to use this introduced
   thread_group_times().  It make c{u,s}time in signal struct to
   have adjusted values like before this patch.

 - Replace some thread_group_cputime() by thread_group_times().
   This replacements are only applied where conveys the "adjusted"
   cputime to users, and where already uses task_times() near by it.
   (i.e. sys_times(), getrusage(), and /proc/<PID>/stat.)

This patch have a positive side effect:

 - Before this patch, if a group contains many short-life threads
   (e.g. runs 0.9ms and not interrupted by ticks), the group's
   cputime could be invisible since thread's cputime was accumulated
   after adjusted: imagine adjustment function as adj(ticks, runtime),
     {adj(0, 0.9) + adj(0, 0.9) + ....} = {0 + 0 + ....} = 0.
   After this patch it will not happen because the adjustment is
   applied after accumulated.

v2:
 - remove if()s, put new variables into signal_struct.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
LKML-Reference: <4B162517.8040909@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-02 17:32:40 +01:00
Hidetoshi Seto
d180c5bcce sched: Introduce task_times() to replace task_{u,s}time() pair
Functions task_{u,s}time() are called in pair in almost all
cases.  However task_stime() is implemented to call task_utime()
from its inside, so such paired calls run task_utime() twice.

It means we do heavy divisions (div_u64 + do_div) twice to get
utime and stime which can be obtained at same time by one set
of divisions.

This patch introduces a function task_times(*tsk, *utime,
*stime) to retrieve utime and stime at once in better, optimized
way.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
LKML-Reference: <4B0E16AE.906@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-26 12:59:19 +01:00
Linus Torvalds
3242f9804b Merge branch 'hwpoison-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6:
  HWPOISON: fix invalid page count in printk output
  HWPOISON: Allow schedule_on_each_cpu() from keventd
  HWPOISON: fix/proc/meminfo alignment
  HWPOISON: fix oops on ksm pages
  HWPOISON: Fix page count leak in hwpoison late kill in do_swap_page
  HWPOISON: return early on non-LRU pages
  HWPOISON: Add brief hwpoison description to Documentation
  HWPOISON: Clean up PR_MCE_KILL interface
2009-10-29 08:20:00 -07:00
Christian Borntraeger
0d0df599f1 connector: fix regression introduced by sid connector
Since commit 02b51df1b0 (proc connector: add
event for process becoming session leader) we have the following warning:

Badness at kernel/softirq.c:143
[...]
Krnl PSW : 0404c00180000000 00000000001481d4 (local_bh_enable+0xb0/0xe0)
[...]
Call Trace:
([<000000013fe04100>] 0x13fe04100)
 [<000000000048a946>] sk_filter+0x9a/0xd0
 [<000000000049d938>] netlink_broadcast+0x2c0/0x53c
 [<00000000003ba9ae>] cn_netlink_send+0x272/0x2b0
 [<00000000003baef0>] proc_sid_connector+0xc4/0xd4
 [<0000000000142604>] __set_special_pids+0x58/0x90
 [<0000000000159938>] sys_setsid+0xb4/0xd8
 [<00000000001187fe>] sysc_noemu+0x10/0x16
 [<00000041616cb266>] 0x41616cb266

The warning is
--->    WARN_ON_ONCE(in_irq() || irqs_disabled());

The network code must not be called with disabled interrupts but
sys_setsid holds the tasklist_lock with spinlock_irq while calling the
connector.

After a discussion we agreed that we can move proc_sid_connector from
__set_special_pids to sys_setsid.

We also agreed that it is sufficient to change the check from
task_session(curr) != pid into err > 0, since if we don't change the
session, this means we were already the leader and return -EPERM.

One last thing:
There is also daemonize(), and some people might want to get a
notification in that case. Since daemonize() is only needed if a user
space does kernel_thread this does not look important (and there seems
to be no consensus if this connector should be called in daemonize). If
we really want this, we can add proc_sid_connector to daemonize() in an
additional patch (Scott?)

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Scott James Remnant <scott@ubuntu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29 07:39:25 -07:00
Thomas Gleixner
6f15fa5008 sys: Remove BKL from sys_reboot
Serialization of sys_reboot can be done local. The BKL is not
protecting anything else.

LKML-Reference: <20091010153349.405590702@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-10-14 15:31:10 +02:00
Andi Kleen
1087e9b4ff HWPOISON: Clean up PR_MCE_KILL interface
While writing the manpage I noticed some shortcomings in the
current interface.

- Define symbolic names for all the different values
- Boundary check the kill mode values
- For symmetry add a get interface too. This allows library
code to get/set the current state.
- For consistency define a PR_MCE_KILL_DEFAULT value

Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-10-04 03:23:17 +02:00
Linus Torvalds
db16826367 Merge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits)
  HWPOISON: Enable error_remove_page on btrfs
  HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs
  HWPOISON: Add madvise() based injector for hardware poisoned pages v4
  HWPOISON: Enable error_remove_page for NFS
  HWPOISON: Enable .remove_error_page for migration aware file systems
  HWPOISON: The high level memory error handler in the VM v7
  HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
  HWPOISON: shmem: call set_page_dirty() with locked page
  HWPOISON: Define a new error_remove_page address space op for async truncation
  HWPOISON: Add invalidate_inode_page
  HWPOISON: Refactor truncate to allow direct truncating of page v2
  HWPOISON: check and isolate corrupted free pages v2
  HWPOISON: Handle hardware poisoned pages in try_to_unmap
  HWPOISON: Use bitmask/action code for try_to_unmap behaviour
  HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2
  HWPOISON: Add poison check to page fault handling
  HWPOISON: Add basic support for poisoned pages in fault handler v3
  HWPOISON: Add new SIGBUS error codes for hardware poison signals
  HWPOISON: Add support for poison swap entries v2
  HWPOISON: Export some rmap vma locking to outside world
  ...
2009-09-24 07:53:22 -07:00
Jiri Pirko
1f10206cf8 getrusage: fill ru_maxrss value
Make ->ru_maxrss value in struct rusage filled accordingly to rss hiwater
mark.  This struct is filled as a parameter to getrusage syscall.
->ru_maxrss value is set to KBs which is the way it is done in BSD
systems.  /usr/bin/time (gnu time) application converts ->ru_maxrss to KBs
which seems to be incorrect behavior.  Maintainer of this util was
notified by me with the patch which corrects it and cc'ed.

To make this happen we extend struct signal_struct by two fields.  The
first one is ->maxrss which we use to store rss hiwater of the task.  The
second one is ->cmaxrss which we use to store highest rss hiwater of all
task childs.  These values are used in k_getrusage() to actually fill
->ru_maxrss.  k_getrusage() uses current rss hiwater value directly if mm
struct exists.

Note:
exec() clear mm->hiwater_rss, but doesn't clear sig->maxrss.
it is intetionally behavior. *BSD getrusage have exec() inheriting.

test programs
========================================================

getrusage.c
===========
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <sys/types.h>
 #include <sys/time.h>
 #include <sys/resource.h>
 #include <sys/types.h>
 #include <sys/wait.h>
 #include <unistd.h>
 #include <signal.h>
 #include <sys/mman.h>

 #include "common.h"

 #define err(str) perror(str), exit(1)

int main(int argc, char** argv)
{
	int status;

	printf("allocate 100MB\n");
	consume(100);

	printf("testcase1: fork inherit? \n");
	printf("  expect: initial.self ~= child.self\n");
	show_rusage("initial");
	if (__fork()) {
		wait(&status);
	} else {
		show_rusage("fork child");
		_exit(0);
	}
	printf("\n");

	printf("testcase2: fork inherit? (cont.) \n");
	printf("  expect: initial.children ~= 100MB, but child.children = 0\n");
	show_rusage("initial");
	if (__fork()) {
		wait(&status);
	} else {
		show_rusage("child");
		_exit(0);
	}
	printf("\n");

	printf("testcase3: fork + malloc \n");
	printf("  expect: child.self ~= initial.self + 50MB\n");
	show_rusage("initial");
	if (__fork()) {
		wait(&status);
	} else {
		printf("allocate +50MB\n");
		consume(50);
		show_rusage("fork child");
		_exit(0);
	}
	printf("\n");

	printf("testcase4: grandchild maxrss\n");
	printf("  expect: post_wait.children ~= 300MB\n");
	show_rusage("initial");
	if (__fork()) {
		wait(&status);
		show_rusage("post_wait");
	} else {
		system("./child -n 0 -g 300");
		_exit(0);
	}
	printf("\n");

	printf("testcase5: zombie\n");
	printf("  expect: pre_wait ~= initial, IOW the zombie process is not accounted.\n");
	printf("          post_wait ~= 400MB, IOW wait() collect child's max_rss. \n");
	show_rusage("initial");
	if (__fork()) {
		sleep(1); /* children become zombie */
		show_rusage("pre_wait");
		wait(&status);
		show_rusage("post_wait");
	} else {
		system("./child -n 400");
		_exit(0);
	}
	printf("\n");

	printf("testcase6: SIG_IGN\n");
	printf("  expect: initial ~= after_zombie (child's 500MB alloc should be ignored).\n");
	show_rusage("initial");
	signal(SIGCHLD, SIG_IGN);
	if (__fork()) {
		sleep(1); /* children become zombie */
		show_rusage("after_zombie");
	} else {
		system("./child -n 500");
		_exit(0);
	}
	printf("\n");
	signal(SIGCHLD, SIG_DFL);

	printf("testcase7: exec (without fork) \n");
	printf("  expect: initial ~= exec \n");
	show_rusage("initial");
	execl("./child", "child", "-v", NULL);

	return 0;
}

child.c
=======
 #include <sys/types.h>
 #include <unistd.h>
 #include <sys/types.h>
 #include <sys/wait.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <sys/types.h>
 #include <sys/time.h>
 #include <sys/resource.h>

 #include "common.h"

int main(int argc, char** argv)
{
	int status;
	int c;
	long consume_size = 0;
	long grandchild_consume_size = 0;
	int show = 0;

	while ((c = getopt(argc, argv, "n:g:v")) != -1) {
		switch (c) {
		case 'n':
			consume_size = atol(optarg);
			break;
		case 'v':
			show = 1;
			break;
		case 'g':

			grandchild_consume_size = atol(optarg);
			break;
		default:
			break;
		}
	}

	if (show)
		show_rusage("exec");

	if (consume_size) {
		printf("child alloc %ldMB\n", consume_size);
		consume(consume_size);
	}

	if (grandchild_consume_size) {
		if (fork()) {
			wait(&status);
		} else {
			printf("grandchild alloc %ldMB\n", grandchild_consume_size);
			consume(grandchild_consume_size);

			exit(0);
		}
	}

	return 0;
}

common.c
========
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <sys/types.h>
 #include <sys/time.h>
 #include <sys/resource.h>
 #include <sys/types.h>
 #include <sys/wait.h>
 #include <unistd.h>
 #include <signal.h>
 #include <sys/mman.h>

 #include "common.h"
 #define err(str) perror(str), exit(1)

void show_rusage(char *prefix)
{
    	int err, err2;
    	struct rusage rusage_self;
    	struct rusage rusage_children;

    	printf("%s: ", prefix);
    	err = getrusage(RUSAGE_SELF, &rusage_self);
    	if (!err)
    		printf("self %ld ", rusage_self.ru_maxrss);
    	err2 = getrusage(RUSAGE_CHILDREN, &rusage_children);
    	if (!err2)
    		printf("children %ld ", rusage_children.ru_maxrss);

    	printf("\n");
}

/* Some buggy OS need this worthless CPU waste. */
void make_pagefault(void)
{
	void *addr;
	int size = getpagesize();
	int i;

	for (i=0; i<1000; i++) {
		addr = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, -1, 0);
		if (addr == MAP_FAILED)
			err("make_pagefault");
		memset(addr, 0, size);
		munmap(addr, size);
	}
}

void consume(int mega)
{
    	size_t sz = mega * 1024 * 1024;
    	void *ptr;

    	ptr = malloc(sz);
    	memset(ptr, 0, sz);
	make_pagefault();
}

pid_t __fork(void)
{
	pid_t pid;

	pid = fork();
	make_pagefault();

	return pid;
}

common.h
========
void show_rusage(char *prefix);
void make_pagefault(void);
void consume(int mega);
pid_t __fork(void);

FreeBSD result (expected result)
========================================================
allocate 100MB
testcase1: fork inherit?
  expect: initial.self ~= child.self
initial: self 103492 children 0
fork child: self 103540 children 0

testcase2: fork inherit? (cont.)
  expect: initial.children ~= 100MB, but child.children = 0
initial: self 103540 children 103540
child: self 103564 children 0

testcase3: fork + malloc
  expect: child.self ~= initial.self + 50MB
initial: self 103564 children 103564
allocate +50MB
fork child: self 154860 children 0

testcase4: grandchild maxrss
  expect: post_wait.children ~= 300MB
initial: self 103564 children 154860
grandchild alloc 300MB
post_wait: self 103564 children 308720

testcase5: zombie
  expect: pre_wait ~= initial, IOW the zombie process is not accounted.
          post_wait ~= 400MB, IOW wait() collect child's max_rss.
initial: self 103564 children 308720
child alloc 400MB
pre_wait: self 103564 children 308720
post_wait: self 103564 children 411312

testcase6: SIG_IGN
  expect: initial ~= after_zombie (child's 500MB alloc should be ignored).
initial: self 103564 children 411312
child alloc 500MB
after_zombie: self 103624 children 411312

testcase7: exec (without fork)
  expect: initial ~= exec
initial: self 103624 children 411312
exec: self 103624 children 411312

Linux result (actual test result)
========================================================
allocate 100MB
testcase1: fork inherit?
  expect: initial.self ~= child.self
initial: self 102848 children 0
fork child: self 102572 children 0

testcase2: fork inherit? (cont.)
  expect: initial.children ~= 100MB, but child.children = 0
initial: self 102876 children 102644
child: self 102572 children 0

testcase3: fork + malloc
  expect: child.self ~= initial.self + 50MB
initial: self 102876 children 102644
allocate +50MB
fork child: self 153804 children 0

testcase4: grandchild maxrss
  expect: post_wait.children ~= 300MB
initial: self 102876 children 153864
grandchild alloc 300MB
post_wait: self 102876 children 307536

testcase5: zombie
  expect: pre_wait ~= initial, IOW the zombie process is not accounted.
          post_wait ~= 400MB, IOW wait() collect child's max_rss.
initial: self 102876 children 307536
child alloc 400MB
pre_wait: self 102876 children 307536
post_wait: self 102876 children 410076

testcase6: SIG_IGN
  expect: initial ~= after_zombie (child's 500MB alloc should be ignored).
initial: self 102876 children 410076
child alloc 500MB
after_zombie: self 102880 children 410076

testcase7: exec (without fork)
  expect: initial ~= exec
initial: self 102880 children 410076
exec: self 102880 children 410076

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:30 -07:00
Ingo Molnar
cdd6c482c9 perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:28:04 +02:00
Andi Kleen
4db96cf077 HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
This allows processes to override their early/late kill
behaviour on hardware memory errors.

Typically applications which are memory error aware is
better of with early kill (see the error as soon
as possible), all others with late kill (only
see the error when the error is really impacting execution)

There's a global sysctl, but this way an application
can set its specific policy.

We're using two bits, one to signify that the process
stated its intention and that

I also made the prctl future proof by enforcing
the unused arguments are 0.

The state is inherited to children.

Note this makes us officially run out of process flags
on 32bit, but the next patch can easily add another field.

Manpage patch will be supplied separately.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-09-16 11:50:14 +02:00
Alexey Dobriyan
30639b6af8 groups: move code to kernel/groups.c
Move supplementary groups implementation to kernel/groups.c .
kernel/sys.c already accumulated quite a few random stuff.

Do strictly copy/paste + add required headers to compile.  Compile-tested
on many configs and archs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:48 -07:00
Ingo Molnar
e7fd5d4b3d Merge branch 'linus' into perfcounters/core
Merge reason: This brach was on -rc1, refresh it to almost-rc4 to pick up
              the latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 14:47:05 +02:00
Andi Kleen
3d26dcf767 kernel/sys.c: clean up sys_shutdown exit path
Impact: cleanup, fix

Clean up sys_shutdown() exit path.  Factor out common code.  Return
correct error code instead of always 0 on failure.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:32 -07:00
Ingo Molnar
f541ae326f Merge branch 'linus' into perfcounters/core-v2
Merge reason: we have gathered quite a few conflicts, need to merge upstream

Conflicts:
	arch/powerpc/kernel/Makefile
	arch/x86/ia32/ia32entry.S
	arch/x86/include/asm/hardirq.h
	arch/x86/include/asm/unistd_32.h
	arch/x86/include/asm/unistd_64.h
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/irq.c
	arch/x86/kernel/syscall_table_32.S
	arch/x86/mm/iomap_32.c
	include/linux/sched.h
	kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-06 09:02:57 +02:00
Linus Torvalds
8fe74cf053 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Remove two unneeded exports and make two symbols static in fs/mpage.c
  Cleanup after commit 585d3bc06f
  Trim includes of fdtable.h
  Don't crap into descriptor table in binfmt_som
  Trim includes in binfmt_elf
  Don't mess with descriptor table in load_elf_binary()
  Get rid of indirect include of fs_struct.h
  New helper - current_umask()
  check_unsafe_exec() doesn't care about signal handlers sharing
  New locking/refcounting for fs_struct
  Take fs_struct handling to new file (fs/fs_struct.c)
  Get rid of bumping fs_struct refcount in pivot_root(2)
  Kill unsharing fs_struct in __set_personality()
2009-04-02 21:09:10 -07:00
Oleg Nesterov
1b0f7ffd0e pids: kill signal_struct-> __pgrp/__session and friends
We are wasting 2 words in signal_struct without any reason to implement
task_pgrp_nr() and task_session_nr().

task_session_nr() has no callers since
2e2ba22ea4, we can remove it.

task_pgrp_nr() is still (I believe wrongly) used in fs/autofsX and
fs/coda.

This patch reimplements task_pgrp_nr() via task_pgrp_nr_ns(), and kills
__pgrp/__session and the related helpers.

The change in drivers/char/tty_io.c is cosmetic, but hopefully makes sense
anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Alan Cox <number6@the-village.bc.nu>		[tty parts]
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:02 -07:00
Al Viro
5ad4e53bd5 Get rid of indirect include of fs_struct.h
Don't pull it in sched.h; very few files actually need it and those
can include directly.  sched.h itself only needs forward declaration
of struct fs_struct;

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-31 23:00:27 -04:00
Ingo Molnar
8163d88c79 Merge commit 'v2.6.29-rc7' into perfcounters/core
Conflicts:
	arch/x86/mm/iomap_32.c
2009-03-04 11:42:31 +01:00
Dhaval Giani
54e9912428 sched: don't allow setuid to succeed if the user does not have rt bandwidth
Impact: fix hung task with certain (non-default) rt-limit settings

Corey Hickey reported that on using setuid to change the uid of a
rt process, the process would be unkillable and not be running.
This is because there was no rt runtime for that user group. Add
in a check to see if a user can attach an rt task to its task group.
On failure, return EINVAL, which is also returned in
CONFIG_CGROUP_SCHED.

Reported-by: Corey Hickey <bugfood-ml@fatooh.org>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-27 11:11:53 +01:00
Ingo Molnar
95fd4845ed Merge commit 'v2.6.29-rc4' into perfcounters/core
Conflicts:
	arch/x86/kernel/setup_percpu.c
	arch/x86/mm/fault.c
	drivers/acpi/processor_idle.c
	kernel/irq/handle.c
2009-02-11 09:22:04 +01:00
Andrew Morton
60fd760fb9 revert "rlimit: permit setting RLIMIT_NOFILE to RLIM_INFINITY"
Revert commit 0c2d64fb6c because it causes
(arguably poorly designed) existing userspace to spend interminable
periods closing billions of not-open file descriptors.

We could bring this back, with some sort of opt-in tunable in /proc, which
defaults to "off".

Peter's alanysis follows:

: I spent several hours trying to get to the bottom of a serious
: performance issue that appeared on one of our servers after upgrading to
: 2.6.28.  In the end it's what could be considered a userspace bug that
: was triggered by a change in 2.6.28.  Since this might also affect other
: people I figured I'd at least document what I found here, and maybe we
: can even do something about it:
:
:
: So, I upgraded some of debian.org's machines to 2.6.28.1 and immediately
: the team maintaining our ftp archive complained that one of their
: scripts that previously ran in a few minutes still hadn't even come
: close to being done after an hour or so.  Downgrading to 2.6.27 fixed
: that.
:
: Turns out that script is forking a lot and something in it or python or
: whereever closes all the file descriptors it doesn't want to pass on.
: That is, it starts at zero and goes up to ulimit -n/RLIMIT_NOFILE and
: closes them all with a few exceptions.
:
: Turns out that takes a long time when your limit -n is now 2^20 (1048576).
:
: With 2.6.27.* the ulimit -n was the standard 1024, but with 2.6.28 it is
: now a thousand times that.
:
: 2.6.28 included a patch titled "rlimit: permit setting RLIMIT_NOFILE to
: RLIM_INFINITY" (0c2d64fb6c)[1] that
: allows, as the title implies, to set the limit for number of files to
: infinity.
:
: Closer investigation showed that the broken default ulimit did not apply
: to "system" processes (like stuff started from init).  In the end I
: could establish that all processes that passed through pam_limit at one
: point had the bad resource limit.
:
: Apparently the pam library in Debian etch (4.0) initializes the limits
: to some default values when it doesn't have any settings in limit.conf
: to override them.  Turns out that for nofiles this is RLIM_INFINITY.
: Commenting out "case RLIMIT_NOFILE" in pam_limit.c:267 of our pam
: package version 0.79-5 fixes that - tho I'm not sure what side effects
: that has.
:
: Debian lenny (the upcoming 5.0 version) doesn't have this issue as it
: uses a different pam (version).

Reported-by: Peter Palfrader <weasel@debian.org>
Cc: Adam Tkac <vonsch@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05 12:56:47 -08:00
Ingo Molnar
77835492ed Merge commit 'v2.6.29-rc2' into perfcounters/core
Conflicts:
	include/linux/syscalls.h
2009-01-21 16:37:27 +01:00
Heiko Carstens
836f92adf1 [CVE-2009-0029] System call wrappers part 31
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:31 +01:00
Heiko Carstens
c4ea37c26a [CVE-2009-0029] System call wrappers part 26
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:29 +01:00
Heiko Carstens
e48fbb699f [CVE-2009-0029] System call wrappers part 24
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:28 +01:00
Heiko Carstens
5a8a82b1d3 [CVE-2009-0029] System call wrappers part 23
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:28 +01:00
Heiko Carstens
754fe8d297 [CVE-2009-0029] System call wrappers part 07
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:20 +01:00
Heiko Carstens
b290ebe2c4 [CVE-2009-0029] System call wrappers part 04
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:19 +01:00
Heiko Carstens
ae1251ab78 [CVE-2009-0029] System call wrappers part 03
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:19 +01:00
Heiko Carstens
dbf040d9d1 [CVE-2009-0029] System call wrappers part 02
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:19 +01:00
Heiko Carstens
58fd3aa288 [CVE-2009-0029] System call wrappers part 01
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:18 +01:00
Ingo Molnar
506c10f26c Merge commit 'v2.6.29-rc1' into perfcounters/core
Conflicts:
	include/linux/kernel_stat.h
2009-01-11 02:42:53 +01:00
Linus Torvalds
cfa97f993c Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: fix section mismatch
  sched: fix double kfree in failure path
  sched: clean up arch_reinit_sched_domains()
  sched: mark sched_create_sysfs_power_savings_entries() as __init
  getrusage: RUSAGE_THREAD should return ru_utime and ru_stime
  sched: fix sched_slice()
  sched_clock: prevent scd->clock from moving backwards, take #2
  sched: sched.c declare variables before they get used
2009-01-06 17:10:33 -08:00
Paul Mackerras
e3d5a27d58 Allow times and time system calls to return small negative values
At the moment, the times() system call will appear to fail for a period
shortly after boot, while the value it want to return is between -4095 and
-1.  The same thing will also happen for the time() system call on 32-bit
platforms some time in 2106 or so.

On some platforms, such as x86, this is unavoidable because of the system
call ABI, but other platforms such as powerpc have a separate error
indication from the return value, so system calls can in fact return small
negative values without indicating an error.  On those platforms,
force_successful_syscall_return() provides a way to indicate that the
system call return value should not be treated as an error even if it is
in the range which would normally be taken as a negative error number.

This adds a force_successful_syscall_return() call to the time() and
times() system calls plus their 32-bit compat versions, so that they don't
erroneously indicate an error on those platforms whose system call ABI has
a separate error indication.  This will not affect anything on other
platforms.

Joakim Tjernlund added the fix for time() and the compat versions of
time() and times(), after I did the fix for times().

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:13 -08:00
KOSAKI Motohiro
8916edef58 getrusage: RUSAGE_THREAD should return ru_utime and ru_stime
Impact: task stats regression fix

Original getrusage(RUSAGE_THREAD) implementation can return ru_utime and
ru_stime. But commit "f06febc: timers: fix itimer/many thread hang" broke it.

this patch restores it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04 14:04:00 +01:00
Linus Torvalds
5f34fe1cfc Merge branch 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
  stacktrace: provide save_stack_trace_tsk() weak alias
  rcu: provide RCU options on non-preempt architectures too
  printk: fix discarding message when recursion_bug
  futex: clean up futex_(un)lock_pi fault handling
  "Tree RCU": scalable classic RCU implementation
  futex: rename field in futex_q to clarify single waiter semantics
  x86/swiotlb: add default swiotlb_arch_range_needs_mapping
  x86/swiotlb: add default phys<->bus conversion
  x86: unify pci iommu setup and allow swiotlb to compile for 32 bit
  x86: add swiotlb allocation functions
  swiotlb: consolidate swiotlb info message printing
  swiotlb: support bouncing of HighMem pages
  swiotlb: factor out copy to/from device
  swiotlb: add arch hook to force mapping
  swiotlb: allow architectures to override phys<->bus<->phys conversions
  swiotlb: add comment where we handle the overflow of a dma mask on 32 bit
  rcu: fix rcutorture behavior during reboot
  resources: skip sanity check of busy resources
  swiotlb: move some definitions to header
  swiotlb: allow architectures to override swiotlb pool allocation
  ...

Fix up trivial conflicts in
  arch/x86/kernel/Makefile
  arch/x86/mm/init_32.c
  include/linux/hardirq.h
as per Ingo's suggestions.
2008-12-30 16:10:19 -08:00
Ingo Molnar
e1df957670 Merge branch 'linus' into perfcounters/core
Conflicts:
	fs/exec.c
	include/linux/init_task.h

Simple context conflicts.
2008-12-29 09:45:15 +01:00
Ingo Molnar
1d1c7ddbfa perf counters: add prctl interface to disable/enable counters
Add a way for self-monitoring tasks to disable/enable counters summarily,
via a prctl:

	PR_TASK_PERF_COUNTERS_DISABLE		31
	PR_TASK_PERF_COUNTERS_ENABLE		32

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 15:45:55 +01:00
Serge Hallyn
18b6e0414e User namespaces: set of cleanups (v2)
The user_ns is moved from nsproxy to user_struct, so that a struct
cred by itself is sufficient to determine access (which it otherwise
would not be).  Corresponding ecryptfs fixes (by David Howells) are
here as well.

Fix refcounting.  The following rules now apply:
        1. The task pins the user struct.
        2. The user struct pins its user namespace.
        3. The user namespace pins the struct user which created it.

User namespaces are cloned during copy_creds().  Unsharing a new user_ns
is no longer possible.  (We could re-add that, but it'll cause code
duplication and doesn't seem useful if PAM doesn't need to clone user
namespaces).

When a user namespace is created, its first user (uid 0) gets empty
keyrings and a clean group_info.

This incorporates a previous patch by David Howells.  Here
is his original patch description:

>I suggest adding the attached incremental patch.  It makes the following
>changes:
>
> (1) Provides a current_user_ns() macro to wrap accesses to current's user
>     namespace.
>
> (2) Fixes eCryptFS.
>
> (3) Renames create_new_userns() to create_user_ns() to be more consistent
>     with the other associated functions and because the 'new' in the name is
>     superfluous.
>
> (4) Moves the argument and permission checks made for CLONE_NEWUSER to the
>     beginning of do_fork() so that they're done prior to making any attempts
>     at allocation.
>
> (5) Calls create_user_ns() after prepare_creds(), and gives it the new creds
>     to fill in rather than have it return the new root user.  I don't imagine
>     the new root user being used for anything other than filling in a cred
>     struct.
>
>     This also permits me to get rid of a get_uid() and a free_uid(), as the
>     reference the creds were holding on the old user_struct can just be
>     transferred to the new namespace's creator pointer.
>
> (6) Makes create_user_ns() reset the UIDs and GIDs of the creds under
>     preparation rather than doing it in copy_creds().
>
>David

>Signed-off-by: David Howells <dhowells@redhat.com>

Changelog:
	Oct 20: integrate dhowells comments
		1. leave thread_keyring alone
		2. use current_user_ns() in set_user()

Signed-off-by: Serge Hallyn <serue@us.ibm.com>
2008-11-24 18:57:41 -05:00
Oleg Nesterov
2b5fe6de58 thread_group_cputime: move a couple of callsites outside of ->siglock
Impact: relax the locking of cpu-time accounting calls

->siglock buys nothing for thread_group_cputime() in do_sys_times() and
wait_task_zombie() (which btw takes the unrelated parent's ->siglock).

Actually I think do_sys_times() doesn't need ->siglock at all.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-17 16:55:55 +01:00
David Howells
d84f4f992c CRED: Inaugurate COW credentials
Inaugurate copy-on-write credentials management.  This uses RCU to manage the
credentials pointer in the task_struct with respect to accesses by other tasks.
A process may only modify its own credentials, and so does not need locking to
access or modify its own credentials.

A mutex (cred_replace_mutex) is added to the task_struct to control the effect
of PTRACE_ATTACHED on credential calculations, particularly with respect to
execve().

With this patch, the contents of an active credentials struct may not be
changed directly; rather a new set of credentials must be prepared, modified
and committed using something like the following sequence of events:

	struct cred *new = prepare_creds();
	int ret = blah(new);
	if (ret < 0) {
		abort_creds(new);
		return ret;
	}
	return commit_creds(new);

There are some exceptions to this rule: the keyrings pointed to by the active
credentials may be instantiated - keyrings violate the COW rule as managing
COW keyrings is tricky, given that it is possible for a task to directly alter
the keys in a keyring in use by another task.

To help enforce this, various pointers to sets of credentials, such as those in
the task_struct, are declared const.  The purpose of this is compile-time
discouragement of altering credentials through those pointers.  Once a set of
credentials has been made public through one of these pointers, it may not be
modified, except under special circumstances:

  (1) Its reference count may incremented and decremented.

  (2) The keyrings to which it points may be modified, but not replaced.

The only safe way to modify anything else is to create a replacement and commit
using the functions described in Documentation/credentials.txt (which will be
added by a later patch).

This patch and the preceding patches have been tested with the LTP SELinux
testsuite.

This patch makes several logical sets of alteration:

 (1) execve().

     This now prepares and commits credentials in various places in the
     security code rather than altering the current creds directly.

 (2) Temporary credential overrides.

     do_coredump() and sys_faccessat() now prepare their own credentials and
     temporarily override the ones currently on the acting thread, whilst
     preventing interference from other threads by holding cred_replace_mutex
     on the thread being dumped.

     This will be replaced in a future patch by something that hands down the
     credentials directly to the functions being called, rather than altering
     the task's objective credentials.

 (3) LSM interface.

     A number of functions have been changed, added or removed:

     (*) security_capset_check(), ->capset_check()
     (*) security_capset_set(), ->capset_set()

     	 Removed in favour of security_capset().

     (*) security_capset(), ->capset()

     	 New.  This is passed a pointer to the new creds, a pointer to the old
     	 creds and the proposed capability sets.  It should fill in the new
     	 creds or return an error.  All pointers, barring the pointer to the
     	 new creds, are now const.

     (*) security_bprm_apply_creds(), ->bprm_apply_creds()

     	 Changed; now returns a value, which will cause the process to be
     	 killed if it's an error.

     (*) security_task_alloc(), ->task_alloc_security()

     	 Removed in favour of security_prepare_creds().

     (*) security_cred_free(), ->cred_free()

     	 New.  Free security data attached to cred->security.

     (*) security_prepare_creds(), ->cred_prepare()

     	 New. Duplicate any security data attached to cred->security.

     (*) security_commit_creds(), ->cred_commit()

     	 New. Apply any security effects for the upcoming installation of new
     	 security by commit_creds().

     (*) security_task_post_setuid(), ->task_post_setuid()

     	 Removed in favour of security_task_fix_setuid().

     (*) security_task_fix_setuid(), ->task_fix_setuid()

     	 Fix up the proposed new credentials for setuid().  This is used by
     	 cap_set_fix_setuid() to implicitly adjust capabilities in line with
     	 setuid() changes.  Changes are made to the new credentials, rather
     	 than the task itself as in security_task_post_setuid().

     (*) security_task_reparent_to_init(), ->task_reparent_to_init()

     	 Removed.  Instead the task being reparented to init is referred
     	 directly to init's credentials.

	 NOTE!  This results in the loss of some state: SELinux's osid no
	 longer records the sid of the thread that forked it.

     (*) security_key_alloc(), ->key_alloc()
     (*) security_key_permission(), ->key_permission()

     	 Changed.  These now take cred pointers rather than task pointers to
     	 refer to the security context.

 (4) sys_capset().

     This has been simplified and uses less locking.  The LSM functions it
     calls have been merged.

 (5) reparent_to_kthreadd().

     This gives the current thread the same credentials as init by simply using
     commit_thread() to point that way.

 (6) __sigqueue_alloc() and switch_uid()

     __sigqueue_alloc() can't stop the target task from changing its creds
     beneath it, so this function gets a reference to the currently applicable
     user_struct which it then passes into the sigqueue struct it returns if
     successful.

     switch_uid() is now called from commit_creds(), and possibly should be
     folded into that.  commit_creds() should take care of protecting
     __sigqueue_alloc().

 (7) [sg]et[ug]id() and co and [sg]et_current_groups.

     The set functions now all use prepare_creds(), commit_creds() and
     abort_creds() to build and check a new set of credentials before applying
     it.

     security_task_set[ug]id() is called inside the prepared section.  This
     guarantees that nothing else will affect the creds until we've finished.

     The calling of set_dumpable() has been moved into commit_creds().

     Much of the functionality of set_user() has been moved into
     commit_creds().

     The get functions all simply access the data directly.

 (8) security_task_prctl() and cap_task_prctl().

     security_task_prctl() has been modified to return -ENOSYS if it doesn't
     want to handle a function, or otherwise return the return value directly
     rather than through an argument.

     Additionally, cap_task_prctl() now prepares a new set of credentials, even
     if it doesn't end up using it.

 (9) Keyrings.

     A number of changes have been made to the keyrings code:

     (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have
     	 all been dropped and built in to the credentials functions directly.
     	 They may want separating out again later.

     (b) key_alloc() and search_process_keyrings() now take a cred pointer
     	 rather than a task pointer to specify the security context.

     (c) copy_creds() gives a new thread within the same thread group a new
     	 thread keyring if its parent had one, otherwise it discards the thread
     	 keyring.

     (d) The authorisation key now points directly to the credentials to extend
     	 the search into rather pointing to the task that carries them.

     (e) Installing thread, process or session keyrings causes a new set of
     	 credentials to be created, even though it's not strictly necessary for
     	 process or session keyrings (they're shared).

(10) Usermode helper.

     The usermode helper code now carries a cred struct pointer in its
     subprocess_info struct instead of a new session keyring pointer.  This set
     of credentials is derived from init_cred and installed on the new process
     after it has been cloned.

     call_usermodehelper_setup() allocates the new credentials and
     call_usermodehelper_freeinfo() discards them if they haven't been used.  A
     special cred function (prepare_usermodeinfo_creds()) is provided
     specifically for call_usermodehelper_setup() to call.

     call_usermodehelper_setkeys() adjusts the credentials to sport the
     supplied keyring as the new session keyring.

(11) SELinux.

     SELinux has a number of changes, in addition to those to support the LSM
     interface changes mentioned above:

     (a) selinux_setprocattr() no longer does its check for whether the
     	 current ptracer can access processes with the new SID inside the lock
     	 that covers getting the ptracer's SID.  Whilst this lock ensures that
     	 the check is done with the ptracer pinned, the result is only valid
     	 until the lock is released, so there's no point doing it inside the
     	 lock.

(12) is_single_threaded().

     This function has been extracted from selinux_setprocattr() and put into
     a file of its own in the lib/ directory as join_session_keyring() now
     wants to use it too.

     The code in SELinux just checked to see whether a task shared mm_structs
     with other tasks (CLONE_VM), but that isn't good enough.  We really want
     to know if they're part of the same thread group (CLONE_THREAD).

(13) nfsd.

     The NFS server daemon now has to use the COW credentials to set the
     credentials it is going to use.  It really needs to pass the credentials
     down to the functions it calls, but it can't do that until other patches
     in this series have been applied.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:23 +11:00
David Howells
c69e8d9c01 CRED: Use RCU to access another task's creds and to release a task's own creds
Use RCU to access another task's creds and to release a task's own creds.
This means that it will be possible for the credentials of a task to be
replaced without another task (a) requiring a full lock to read them, and (b)
seeing deallocated memory.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:19 +11:00
David Howells
86a264abe5 CRED: Wrap current->cred and a few other accessors
Wrap current->cred and a few other accessors to hide their actual
implementation.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:18 +11:00
David Howells
b6dff3ec5e CRED: Separate task security context from task_struct
Separate the task security context from task_struct.  At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.

Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.

With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:16 +11:00
David Howells
76aac0e9a1 CRED: Wrap task credential accesses in the core kernel
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-audit@redhat.com
Cc: containers@lists.linux-foundation.org
Cc: linux-mm@kvack.org
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:12 +11:00