Commit graph

46 commits

Author SHA1 Message Date
Paul E. McKenney
9b2e4f1880 rcu: Track idleness independent of idle tasks
Earlier versions of RCU used the scheduling-clock tick to detect idleness
by checking for the idle task, but handled idleness differently for
CONFIG_NO_HZ=y.  But there are now a number of uses of RCU read-side
critical sections in the idle task, for example, for tracing.  A more
fine-grained detection of idleness is therefore required.

This commit presses the old dyntick-idle code into full-time service,
so that rcu_idle_enter(), previously known as rcu_enter_nohz(), is
always invoked at the beginning of an idle loop iteration.  Similarly,
rcu_idle_exit(), previously known as rcu_exit_nohz(), is always invoked
at the end of an idle-loop iteration.  This allows the idle task to
use RCU everywhere except between consecutive rcu_idle_enter() and
rcu_idle_exit() calls, in turn allowing architecture maintainers to
specify exactly where in the idle loop that RCU may be used.

Because some of the userspace upcall uses can result in what looks
to RCU like half of an interrupt, it is not possible to expect that
the irq_enter() and irq_exit() hooks will give exact counts.  This
patch therefore expands the ->dynticks_nesting counter to 64 bits
and uses two separate bitfields to count process/idle transitions
and interrupt entry/exit transitions.  It is presumed that userspace
upcalls do not happen in the idle loop or from usermode execution
(though usermode might do a system call that results in an upcall).
The counter is hard-reset on each process/idle transition, which
avoids the interrupt entry/exit error from accumulating.  Overflow
is avoided by the 64-bitness of the ->dyntick_nesting counter.

This commit also adds warnings if a non-idle task asks RCU to enter
idle state (and these checks will need some adjustment before applying
Frederic's OS-jitter patches (http://lkml.org/lkml/2011/10/7/246).
In addition, validation of ->dynticks and ->dynticks_nesting is added.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:24 -08:00
Frederic Weisbecker
bdd4e85dc3 sched: Isolate preempt counting in its own config option
Create a new CONFIG_PREEMPT_COUNT that handles the inc/dec
of preempt count offset independently. So that the offset
can be updated by preempt_disable() and preempt_enable()
even without the need for CONFIG_PREEMPT beeing set.

This prepares to make CONFIG_DEBUG_SPINLOCK_SLEEP working
with !CONFIG_PREEMPT where it currently doesn't detect
code that sleeps inside explicit preemption disabled
sections.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
2011-06-10 15:15:40 +02:00
Arnd Bergmann
4ba8216cd9 BKL: That's all, folks
This removes the implementation of the big kernel lock,
at last. A lot of people have worked on this in the
past, I so the credit for this patch should be with
everyone who participated in the hunt.

The names on the Cc list are the people that were the
most active in this, according to the recorded git
history, in alphabetical order.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: Alessio Igor Bogani <abogani@texware.it>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jan Blunck <jblunck@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Paul Menage <menage@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-05 10:56:00 +01:00
Linus Torvalds
ed1d77b18c hardirq.h: needs sched.h if using BKL
This really isn't the right thing to do, and strictly speaking we should
have the BKL depth count in the thread info right next to the preempt
count.  The two really do go together.

However, since that would involve a patch to all architectures, and the
BKL is finally going away, it's simply not worth the effort to do the
RightThing(tm).  Just re-instate the <linux/sched.h> include that we
used to get accidentally from the smp_lock.h one.

This is all fallout from the same old "BKL: remove extraneous #include
<smp_lock.h>" commit.

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-18 10:56:29 -08:00
Linus Torvalds
0a5b871ea4 hardirq.h: remove now-empty #ifdef/#endif pair
Commit 451a3c24b0 ("BKL: remove extraneous #include <smp_lock.h>")
removed the #include line that was the only thing that was surrounded by
the #ifdef/#endif.

So now that #ifdef is guarding nothing at all. Just remove it.

Reported-by: Byeong-ryeol Kim <brofkims@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 18:36:25 -08:00
Linus Torvalds
7957f0a857 Fix build failure due to hwirq.h needing smp_lock.h
Arnd Bergmann did an automated scripting run to find left-over instances
of <linux/smp_lock.h>, and had made it trigger it on the normal BKL use
of lock_kernel and unlock_lernel (and apparently release_kernel_lock and
reacquire_kernel_lock too, used by the scheduler).

That resulted in commit 451a3c24b0 ("BKL: remove extraneous #include
<smp_lock.h>").

However, hardirq.h was the only remaining user of the old
'kernel_locked()' interface, and Arnd's script hadn't checked for that.
So depending on your configuration and what header files had been
included, you would get errors like "implicit declaration of function
'kernel_locked'" during the build.

The right fix is not to just re-instate the smp_lock.h include - it is
to just remove 'kernel_locked()' entirely, since the only use was this
one special low-level detail.  Just make hardirq.h do it directly.

In fact this simplifies and clarifies the code, because some trivial
analysis makes it clear that hardirq.h only ever used _one_ of the two
definitions of kernel_locked(), so we can remove the other one entirely.

Reported-by: Zimny Lech <napohybelskurwysynom2010@gmail.com>
Reported-and-acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 14:58:36 -08:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Arnd Bergmann
7fe19da4ca preempt: fix kernel build with !CONFIG_BKL
The preempt count logic tries to take the BKL into account, which breaks
when CONFIG_BKL is not set.

Use the same preempt_count offset that we use without CONFIG_PREEMPT
when CONFIG_BKL is disabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-and-tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-02 08:39:13 -04:00
Linus Torvalds
e36f561a2c Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags:
  Fix IRQ flag handling naming
  MIPS: Add missing #inclusions of <linux/irq.h>
  smc91x: Add missing #inclusion of <linux/irq.h>
  Drop a couple of unnecessary asm/system.h inclusions
  SH: Add missing consts to sys_execve() declaration
  Blackfin: Rename IRQ flags handling functions
  Blackfin: Add missing dep to asm/irqflags.h
  Blackfin: Rename DES PC2() symbol to avoid collision
  Blackfin: Split the BF532 BFIN_*_FIO_FLAG() functions to their own header
  Blackfin: Split PLL code from mach-specific cdef headers
2010-10-21 14:37:27 -07:00
Linus Torvalds
bc4016f481 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (29 commits)
  sched: Export account_system_vtime()
  sched: Call tick_check_idle before __irq_enter
  sched: Remove irq time from available CPU power
  sched: Do not account irq time to current task
  x86: Add IRQ_TIME_ACCOUNTING
  sched: Add IRQ_TIME_ACCOUNTING, finer accounting of irq time
  sched: Add a PF flag for ksoftirqd identification
  sched: Consolidate account_system_vtime extern declaration
  sched: Fix softirq time accounting
  sched: Drop group_capacity to 1 only if local group has extra capacity
  sched: Force balancing on newidle balance if local group has capacity
  sched: Set group_imb only a task can be pulled from the busiest cpu
  sched: Do not consider SCHED_IDLE tasks to be cache hot
  sched: Drop all load weight manipulation for RT tasks
  sched: Create special class for stop/migrate work
  sched: Unindent labels
  sched: Comment updates: fix default latency and granularity numbers
  tracing/sched: Add sched_pi_setprio tracepoint
  sched: Give CPU bound RT tasks preference
  sched: Try not to migrate higher priority RT tasks
  ...
2010-10-21 12:55:43 -07:00
Venkatesh Pallipadi
b52bfee445 sched: Add IRQ_TIME_ACCOUNTING, finer accounting of irq time
s390/powerpc/ia64 have support for CONFIG_VIRT_CPU_ACCOUNTING which does
the fine granularity accounting of user, system, hardirq, softirq times.
Adding that option on archs like x86 will be challenging however, given the
state of TSC reliability on various platforms and also the overhead it will
add in syscall entry exit.

Instead, add a lighter variant that only does finer accounting of
hardirq and softirq times, providing precise irq times (instead of timer tick
based samples). This accounting is added with a new config option
CONFIG_IRQ_TIME_ACCOUNTING so that there won't be any overhead for users not
interested in paying the perf penalty.

This accounting is based on sched_clock, with the code being generic.
So, other archs may find it useful as well.

This patch just adds the core logic and does not enable this logic yet.

Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286237003-12406-5-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18 20:52:24 +02:00
Venkatesh Pallipadi
e1e10a265d sched: Consolidate account_system_vtime extern declaration
Just a minor cleanup patch that makes things easier to the following patches.
No functionality change in this patch.

Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286237003-12406-3-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18 20:52:21 +02:00
Venkatesh Pallipadi
75e1056f5c sched: Fix softirq time accounting
Peter Zijlstra found a bug in the way softirq time is accounted in
VIRT_CPU_ACCOUNTING on this thread:

   http://lkml.indiana.edu/hypermail//linux/kernel/1009.2/01366.html

The problem is, softirq processing uses local_bh_disable internally. There
is no way, later in the flow, to differentiate between whether softirq is
being processed or is it just that bh has been disabled. So, a hardirq when bh
is disabled results in time being wrongly accounted as softirq.

Looking at the code a bit more, the problem exists in !VIRT_CPU_ACCOUNTING
as well. As account_system_time() in normal tick based accouting also uses
softirq_count, which will be set even when not in softirq with bh disabled.

Peter also suggested solution of using 2*SOFTIRQ_OFFSET as irq count
for local_bh_{disable,enable} and using just SOFTIRQ_OFFSET while softirq
processing. The patch below does that and adds API in_serving_softirq() which
returns whether we are currently processing softirq or not.

Also changes one of the usages of softirq_count in net/sched/cls_cgroup.c
to in_serving_softirq.

Looks like many usages of in_softirq really want in_serving_softirq. Those
changes can be made individually on a case by case basis.

Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286237003-12406-2-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18 20:52:20 +02:00
David Howells
bcdb714c88 Drop a couple of unnecessary asm/system.h inclusions
Drop inclusions of asm/system.h from linux/hardirq.h and linux/list.h as
they're no longer required and prevent the M68K arch's IRQ flag handling macros
from being made into inlined functions due to circular dependencies.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-07 14:08:53 +01:00
Paul E. McKenney
a57eb940d1 rcu: Add a TINY_PREEMPT_RCU
Implement a small-memory-footprint uniprocessor-only implementation of
preemptible RCU.  This implementation uses but a single blocked-tasks
list rather than the combinatorial number used per leaf rcu_node by
TREE_PREEMPT_RCU, which reduces memory consumption and greatly simplifies
processing.  This version also takes advantage of uniprocessor execution
to accelerate grace periods in the case where there are no readers.

The general design is otherwise broadly similar to that of TREE_PREEMPT_RCU.

This implementation is a step towards having RCU implementation driven
off of the SMP and PREEMPT kernel configuration variables, which can
happen once this implementation has accumulated sufficient experience.

Removed ACCESS_ONCE() from __rcu_read_unlock() and added barrier() as
suggested by Steve Rostedt in order to avoid the compiler-reordering
issue noted by Mathieu Desnoyers (http://lkml.org/lkml/2010/8/16/183).

As can be seen below, CONFIG_TINY_PREEMPT_RCU represents almost 5Kbyte
savings compared to CONFIG_TREE_PREEMPT_RCU.  Of course, for non-real-time
workloads, CONFIG_TINY_RCU is even better.

	CONFIG_TREE_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   6170	    825	     28	   7023	   kernel/rcutree.o
				   ----
				   7026    Total

	CONFIG_TINY_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   2081	     81	      8	   2170	   kernel/rcutiny.o
				   ----
				   2183    Total

	CONFIG_TINY_RCU (non-preemptible)

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	    719	     25	      0	    744	   kernel/rcutiny.o
				    ---
				    757    Total

Requested-by: Loïc Minier <loic.minier@canonical.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-08-20 08:55:00 -07:00
Paul E. McKenney
9b1d82fa16 rcu: "Tiny RCU", The Bloatwatch Edition
This patch is a version of RCU designed for !SMP provided for a
small-footprint RCU implementation.  In particular, the
implementation of synchronize_rcu() is extremely lightweight and
high performance. It passes rcutorture testing in each of the
four relevant configurations (combinations of NO_HZ and PREEMPT)
on x86.  This saves about 1K bytes compared to old Classic RCU
(which is no longer in mainline), and more than three kilobytes
compared to Hierarchical RCU (updated to 2.6.30):

	CONFIG_TREE_RCU:

	   text	   data	    bss	    dec	    filename
	    183       4       0     187     kernel/rcupdate.o
	   2783     520      36    3339     kernel/rcutree.o
				   3526 Total (vs 4565 for v7)

	CONFIG_TREE_PREEMPT_RCU:

	   text	   data	    bss	    dec	    filename
	    263       4       0     267     kernel/rcupdate.o
	   4594     776      52    5422     kernel/rcutree.o
	   			   5689 Total (6155 for v7)

	CONFIG_TINY_RCU:

	   text	   data	    bss	    dec	    filename
	     96       4       0     100     kernel/rcupdate.o
	    734      24       0     758     kernel/rcutiny.o
	    			    858 Total (vs 848 for v7)

The above is for x86.  Your mileage may vary on other platforms.
Further compression is possible, but is being procrastinated.

Changes from v7 (http://lkml.org/lkml/2009/10/9/388)

o	Apply Lai Jiangshan's review comments (aside from
might_sleep() 	in synchronize_sched(), which is covered by SMP builds).

o	Fix up expedited primitives.

Changes from v6 (http://lkml.org/lkml/2009/9/23/293).

o	Forward ported to put it into the 2.6.33 stream.

o	Added lockdep support.

o	Make lightweight rcu_barrier.

Changes from v5 (http://lkml.org/lkml/2009/6/23/12).

o	Ported to latest pre-2.6.32 merge window kernel.

	- Renamed rcu_qsctr_inc() to rcu_sched_qs().
	- Renamed rcu_bh_qsctr_inc() to rcu_bh_qs().
	- Provided trivial rcu_cpu_notify().
	- Provided trivial exit_rcu().
	- Provided trivial rcu_needs_cpu().
	- Fixed up the rcu_*_enter/exit() functions in linux/hardirq.h.

o	Removed the dependence on EMBEDDED, with a view to making
	TINY_RCU default for !SMP at some time in the future.

o	Added (trivial) support for expedited grace periods.

Changes from v4 (http://lkml.org/lkml/2009/5/2/91) include:

o	Squeeze the size down a bit further by removing the
	->completed field from struct rcu_ctrlblk.

o	This permits synchronize_rcu() to become the empty function.
	Previous concerns about rcutorture were unfounded, as
	rcutorture correctly handles a constant value from
	rcu_batches_completed() and rcu_batches_completed_bh().

Changes from v3 (http://lkml.org/lkml/2009/3/29/221) include:

o	Changed rcu_batches_completed(), rcu_batches_completed_bh()
	rcu_enter_nohz(), rcu_exit_nohz(), rcu_nmi_enter(), and
	rcu_nmi_exit(), to be static inlines, as suggested by David
	Howells.  Doing this saves about 100 bytes from rcutiny.o.
	(The numbers between v3 and this v4 of the patch are not directly
	comparable, since they are against different versions of Linux.)

Changes from v2 (http://lkml.org/lkml/2009/2/3/333) include:

o	Fix whitespace issues.

o	Change short-circuit "||" operator to instead be "+" in order
to 	fix performance bug noted by "kraai" on LWN.

		(http://lwn.net/Articles/324348/)

Changes from v1 (http://lkml.org/lkml/2009/1/13/440) include:

o	This version depends on EMBEDDED as well as !SMP, as suggested
	by Ingo.

o	Updated rcu_needs_cpu() to unconditionally return zero,
	permitting the CPU to enter dynticks-idle mode at any time.
	This works because callbacks can be invoked upon entry to
	dynticks-idle mode.

o	Paul is now OK with this being included, based on a poll at
the 	Kernel Miniconf at linux.conf.au, where about ten people said
	that they cared about saving 900 bytes on single-CPU systems.

o	Applies to both mainline and tip/core/rcu.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: avi@redhat.com
Cc: mtosatti@redhat.com
LKML-Reference: <12565226351355-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 09:40:29 +01:00
Linus Torvalds
774a694f8c Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (64 commits)
  sched: Fix sched::sched_stat_wait tracepoint field
  sched: Disable NEW_FAIR_SLEEPERS for now
  sched: Keep kthreads at default priority
  sched: Re-tune the scheduler latency defaults to decrease worst-case latencies
  sched: Turn off child_runs_first
  sched: Ensure that a child can't gain time over it's parent after fork()
  sched: enable SD_WAKE_IDLE
  sched: Deal with low-load in wake_affine()
  sched: Remove short cut from select_task_rq_fair()
  sched: Turn on SD_BALANCE_NEWIDLE
  sched: Clean up topology.h
  sched: Fix dynamic power-balancing crash
  sched: Remove reciprocal for cpu_power
  sched: Try to deal with low capacity, fix update_sd_power_savings_stats()
  sched: Try to deal with low capacity
  sched: Scale down cpu_power due to RT tasks
  sched: Implement dynamic cpu_power
  sched: Add smt_gain
  sched: Update the cpu_power sum during load-balance
  sched: Add SD_PREFER_SIBLING
  ...
2009-09-11 13:23:18 -07:00
Paul E. McKenney
b560d8ad85 rcu: Expunge lingering references to CONFIG_CLASSIC_RCU, optimize on !SMP
A couple of references to CONFIG_CLASSIC_RCU have survived.
Although these are harmless, it is past time for them to go.
The one in hardirq.h is strictly a readability problem.

The two in pagemap.h appear to disable a !SMP performance
optimization (which this patch re-enables).

This does raise the issue as to whether pagemap.h should really
be referring to the CPU implementation.  Long term, I intend to
make the RCU implementation driven by CONFIG_PREEMPT, at which
point these should change from defined(CONFIG_TREE_RCU) to
!defined(CONFIG_PREEMPT). In the meantime, is there something
else that could be done in pagemap.h?

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josht@linux.vnet.ibm.com
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
LKML-Reference: <20090822050851.GA8414@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-22 13:07:09 +02:00
Arnd Bergmann
8e5b59a2d7 sched: Add default defines for PREEMPT_ACTIVE
The PREEMPT_ACTIVE setting doesn't actually need to be
arch-specific, so set up a sane default for all arches to
(hopefully) migrate to.

> if we look at linux/hardirq.h, it makes this claim:
>  * - bit 28 is the PREEMPT_ACTIVE flag
> if that's true, then why are we letting any arch set this define ?  a
> quick survey shows that half the arches (11) are using 0x10000000 (bit
> 28) while the other half (10) are using 0x4000000 (bit 26).  and then
> there is the ia64 oddity which uses bit 30.  the exact value here
> shouldnt really matter across arches though should it ?

actually alpha, arm and avr32 also use bit 30 (0x40000000),
there are only five (or eight, depending on how you count)
architectures (blackfin, h8300, m68k, s390 and sparc) using bit
26.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 16:13:04 +02:00
Alexey Dobriyan
405f55712d headers: smp_lock.h redux
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 12:22:34 -07:00
Ingo Molnar
9efe21cb82 Merge branch 'linus' into irq/threaded
Conflicts:
	include/linux/irq.h
	kernel/irq/handle.c
2009-04-06 01:41:22 +02:00
Thomas Gleixner
3aa551c9b4 genirq: add threaded interrupt handler support
Add support for threaded interrupt handlers:

A device driver can request that its main interrupt handler runs in a
thread. To achive this the device driver requests the interrupt with
request_threaded_irq() and provides additionally to the handler a
thread function. The handler function is called in hard interrupt
context and needs to check whether the interrupt originated from the
device. If the interrupt originated from the device then the handler
can either return IRQ_HANDLED or IRQ_WAKE_THREAD. IRQ_HANDLED is
returned when no further action is required. IRQ_WAKE_THREAD causes
the genirq code to invoke the threaded (main) handler. When
IRQ_WAKE_THREAD is returned handler must have disabled the interrupt
on the device level. This is mandatory for shared interrupt handlers,
but we need to do it as well for obscure x86 hardware where disabling
an interrupt on the IO_APIC level redirects the interrupt to the
legacy PIC interrupt lines.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2009-03-24 12:15:23 +01:00
Steven Rostedt
2a7b8df04c sched: do not account for NMIs
Impact: avoid corruption in system time accounting

Martin Schwidefsky told me that there was an issue with NMIs and
system accounting. The problem is that the accounting code is
not reentrant, and if an NMI goes off after an interrupt it can
corrupt the accounting.

For now, the best we can do is to treat NMIs like SMIs and they
are not accounted for.

This patch changes nmi_enter to not call __irq_enter and to do
the preempt-count and tracing calls directly.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-12 14:16:46 -05:00
Steven Rostedt
5a5fb7dbe8 preempt-count: force hardirq-count to max of 10
To add a bit in the preempt_count to be set when in NMI context, we
found that some archs did not have enough bits to spare. This is
due to the hardirq_count being a mask that can hold NR_IRQS.

Some archs allow for over 16000 IRQs, and that would require a mask
of 14 bits. The sofitrq mask is 8 bits and the preempt disable mask
is also 8 bits.  The PREEMP_ACTIVE bit is bit 30, and bit 31 would
make the preempt_count (which is type int) a negative number.
A negative preempt_count is a sign of failure.

Add them up 14+8+8+1+1 you get 32 bits. No room for the NMI bit.

But the hardirq_count is to track the number of nested IRQs, not
the number of total IRQs.  This originally took the paranoid approach
of setting the max nesting to NR_IRQS. But when we have archs with
over 1000 IRQs, it is not practical to think they will ever all
nest on a single CPU. Not to mention that this would most definitely
cause a stack overflow.

This patch sets a max of 10 bits to be used for IRQ nesting.
I did a 'git grep HARDIRQ' to examine all users of HARDIRQ_BITS and
HARDIRQ_MASK, and found that making it a max of 10 would not hurt
anyone. I did find that the m68k expected it to be 8 bits, so
I allow for the archs to set the number to be less than 10.

I removed the setting of HARDIRQ_BITS from the archs that set it
to more than 10. This includes ALPHA, ia64 and avr32.

This will always allow room for the NMI bit, and if we need to allow
for NMI nesting, we have 4 bits to play with.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-12 11:19:05 -05:00
Steven Rostedt
375b38b421 nmi: add generic nmi tracking state
This code adds an in_nmi() macro that uses the current tasks preempt count
to track when it is in NMI context. Other parts of the kernel can
use this to determine if the context is in NMI context or not.

This code was inspired by the -rt patch in_nmi version that was
written by Peter Zijlstra, who borrowed that code from
Mathieu Desnoyers.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-07 20:01:23 -05:00
Linus Torvalds
5f34fe1cfc Merge branch 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
  stacktrace: provide save_stack_trace_tsk() weak alias
  rcu: provide RCU options on non-preempt architectures too
  printk: fix discarding message when recursion_bug
  futex: clean up futex_(un)lock_pi fault handling
  "Tree RCU": scalable classic RCU implementation
  futex: rename field in futex_q to clarify single waiter semantics
  x86/swiotlb: add default swiotlb_arch_range_needs_mapping
  x86/swiotlb: add default phys<->bus conversion
  x86: unify pci iommu setup and allow swiotlb to compile for 32 bit
  x86: add swiotlb allocation functions
  swiotlb: consolidate swiotlb info message printing
  swiotlb: support bouncing of HighMem pages
  swiotlb: factor out copy to/from device
  swiotlb: add arch hook to force mapping
  swiotlb: allow architectures to override phys<->bus<->phys conversions
  swiotlb: add comment where we handle the overflow of a dma mask on 32 bit
  rcu: fix rcutorture behavior during reboot
  resources: skip sanity check of busy resources
  swiotlb: move some definitions to header
  swiotlb: allow architectures to override swiotlb pool allocation
  ...

Fix up trivial conflicts in
  arch/x86/kernel/Makefile
  arch/x86/mm/init_32.c
  include/linux/hardirq.h
as per Ingo's suggestions.
2008-12-30 16:10:19 -08:00
Paul E. McKenney
64db4cfff9 "Tree RCU": scalable classic RCU implementation
This patch fixes a long-standing performance bug in classic RCU that
results in massive internal-to-RCU lock contention on systems with
more than a few hundred CPUs.  Although this patch creates a separate
flavor of RCU for ease of review and patch maintenance, it is intended
to replace classic RCU.

This patch still handles stress better than does mainline, so I am still
calling it ready for inclusion.  This patch is against the -tip tree.
Nevertheless, experience on an actual 1000+ CPU machine would still be
most welcome.

Most of the changes noted below were found while creating an rcutiny
(which should permit ejecting the current rcuclassic) and while doing
detailed line-by-line documentation.

Updates from v9 (http://lkml.org/lkml/2008/12/2/334):

o	Fixes from remainder of line-by-line code walkthrough,
	including comment spelling, initialization, undesirable
	narrowing due to type conversion, removing redundant memory
	barriers, removing redundant local-variable initialization,
	and removing redundant local variables.

	I do not believe that any of these fixes address the CPU-hotplug
	issues that Andi Kleen was seeing, but please do give it a whirl
	in case the machine is smarter than I am.

	A writeup from the walkthrough may be found at the following
	URL, in case you are suffering from terminal insomnia or
	masochism:

	http://www.kernel.org/pub/linux/kernel/people/paulmck/tmp/rcutree-walkthrough.2008.12.16a.pdf

o	Made rcutree tracing use seq_file, as suggested some time
	ago by Lai Jiangshan.

o	Added a .csv variant of the rcudata debugfs trace file, to allow
	people having thousands of CPUs to drop the data into
	a spreadsheet.	Tested with oocalc and gnumeric.  Updated
	documentation to suit.

Updates from v8 (http://lkml.org/lkml/2008/11/15/139):

o	Fix a theoretical race between grace-period initialization and
	force_quiescent_state() that could occur if more than three
	jiffies were required to carry out the grace-period
	initialization.  Which it might, if you had enough CPUs.

o	Apply Ingo's printk-standardization patch.

o	Substitute local variables for repeated accesses to global
	variables.

o	Fix comment misspellings and redundant (but harmless) increments
	of ->n_rcu_pending (this latter after having explicitly added it).

o	Apply checkpatch fixes.

Updates from v7 (http://lkml.org/lkml/2008/10/10/291):

o	Fixed a number of problems noted by Gautham Shenoy, including
	the cpu-stall-detection bug that he was having difficulty
	convincing me was real.  ;-)

o	Changed cpu-stall detection to wait for ten seconds rather than
	three in order to reduce false positive, as suggested by Ingo
	Molnar.

o	Produced a design document (http://lwn.net/Articles/305782/).
	The act of writing this document uncovered a number of both
	theoretical and "here and now" bugs as noted below.

o	Fix dynticks_nesting accounting confusion, simplify WARN_ON()
	condition, fix kerneldoc comments, and add memory barriers
	in dynticks interface functions.

o	Add more data to tracing.

o	Remove unused "rcu_barrier" field from rcu_data structure.

o	Count calls to rcu_pending() from scheduling-clock interrupt
	to use as a surrogate timebase should jiffies stop counting.

o	Fix a theoretical race between force_quiescent_state() and
	grace-period initialization.  Yes, initialization does have to
	go on for some jiffies for this race to occur, but given enough
	CPUs...

Updates from v6 (http://lkml.org/lkml/2008/9/23/448):

o	Fix a number of checkpatch.pl complaints.

o	Apply review comments from Ingo Molnar and Lai Jiangshan
	on the stall-detection code.

o	Fix several bugs in !CONFIG_SMP builds.

o	Fix a misspelled config-parameter name so that RCU now announces
	at boot time if stall detection is configured.

o	Run tests on numerous combinations of configurations parameters,
	which after the fixes above, now build and run correctly.

Updates from v5 (http://lkml.org/lkml/2008/9/15/92, bad subject line):

o	Fix a compiler error in the !CONFIG_FANOUT_EXACT case (blew a
	changeset some time ago, and finally got around to retesting
	this option).

o	Fix some tracing bugs in rcupreempt that caused incorrect
	totals to be printed.

o	I now test with a more brutal random-selection online/offline
	script (attached).  Probably more brutal than it needs to be
	on the people reading it as well, but so it goes.

o	A number of optimizations and usability improvements:

	o	Make rcu_pending() ignore the grace-period timeout when
		there is no grace period in progress.

	o	Make force_quiescent_state() avoid going for a global
		lock in the case where there is no grace period in
		progress.

	o	Rearrange struct fields to improve struct layout.

	o	Make call_rcu() initiate a grace period if RCU was
		idle, rather than waiting for the next scheduling
		clock interrupt.

	o	Invoke rcu_irq_enter() and rcu_irq_exit() only when
		idle, as suggested by Andi Kleen.  I still don't
		completely trust this change, and might back it out.

	o	Make CONFIG_RCU_TRACE be the single config variable
		manipulated for all forms of RCU, instead of the prior
		confusion.

	o	Document tracing files and formats for both rcupreempt
		and rcutree.

Updates from v4 for those missing v5 given its bad subject line:

o	Separated dynticks interface so that NMIs and irqs call separate
	functions, greatly simplifying it.  In particular, this code
	no longer requires a proof of correctness.  ;-)

o	Separated dynticks state out into its own per-CPU structure,
	avoiding the duplicated accounting.

o	The case where a dynticks-idle CPU runs an irq handler that
	invokes call_rcu() is now correctly handled, forcing that CPU
	out of dynticks-idle mode.

o	Review comments have been applied (thank you all!!!).
	For but one example, fixed the dynticks-ordering issue that
	Manfred pointed out, saving me much debugging.  ;-)

o	Adjusted rcuclassic and rcupreempt to handle dynticks changes.

Attached is an updated patch to Classic RCU that applies a hierarchy,
greatly reducing the contention on the top-level lock for large machines.
This passes 10-hour concurrent rcutorture and online-offline testing on
128-CPU ppc64 without dynticks enabled, and exposes some timekeeping
bugs in presence of dynticks (exciting working on a system where
"sleep 1" hangs until interrupted...), which were fixed in the
2.6.27 kernel.  It is getting more reliable than mainline by some
measures, so the next version will be against -tip for inclusion.
See also Manfred Spraul's recent patches (or his earlier work from
2004 at http://marc.info/?l=linux-kernel&m=108546384711797&w=2).
We will converge onto a common patch in the fullness of time, but are
currently exploring different regions of the design space.  That said,
I have already gratefully stolen quite a few of Manfred's ideas.

This patch provides CONFIG_RCU_FANOUT, which controls the bushiness
of the RCU hierarchy.  Defaults to 32 on 32-bit machines and 64 on
64-bit machines.  If CONFIG_NR_CPUS is less than CONFIG_RCU_FANOUT,
there is no hierarchy.  By default, the RCU initialization code will
adjust CONFIG_RCU_FANOUT to balance the hierarchy, so strongly NUMA
architectures may choose to set CONFIG_RCU_FANOUT_EXACT to disable
this balancing, allowing the hierarchy to be exactly aligned to the
underlying hardware.  Up to two levels of hierarchy are permitted
(in addition to the root node), allowing up to 16,384 CPUs on 32-bit
systems and up to 262,144 CPUs on 64-bit systems.  I just know that I
am going to regret saying this, but this seems more than sufficient
for the foreseeable future.  (Some architectures might wish to set
CONFIG_RCU_FANOUT=4, which would limit such architectures to 64 CPUs.
If this becomes a real problem, additional levels can be added, but I
doubt that it will make a significant difference on real hardware.)

In the common case, a given CPU will manipulate its private rcu_data
structure and the rcu_node structure that it shares with its immediate
neighbors.  This can reduce both lock and memory contention by multiple
orders of magnitude, which should eliminate the need for the strange
manipulations that are reported to be required when running Linux on
very large systems.

Some shortcomings:

o	More bugs will probably surface as a result of an ongoing
	line-by-line code inspection.

	Patches will be provided as required.

o	There are probably hangs, rcutorture failures, &c.  Seems
	quite stable on a 128-CPU machine, but that is kind of small
	compared to 4096 CPUs.  However, seems to do better than
	mainline.

	Patches will be provided as required.

o	The memory footprint of this version is several KB larger
	than rcuclassic.

	A separate UP-only rcutiny patch will be provided, which will
	reduce the memory footprint significantly, even compared
	to the old rcuclassic.  One such patch passes light testing,
	and has a memory footprint smaller even than rcuclassic.
	Initial reaction from various embedded guys was "it is not
	worth it", so am putting it aside.

Credits:

o	Manfred Spraul for ideas, review comments, and bugs spotted,
	as well as some good friendly competition.  ;-)

o	Josh Triplett, Ingo Molnar, Peter Zijlstra, Mathieu Desnoyers,
	Lai Jiangshan, Andi Kleen, Andy Whitcroft, and Andrew Morton
	for reviews and comments.

o	Thomas Gleixner for much-needed help with some timer issues
	(see patches below).

o	Jon M. Tollefson, Tim Pepper, Andrew Theurer, Jose R. Santos,
	Andy Whitcroft, Darrick Wong, Nishanth Aravamudan, Anton
	Blanchard, Dave Kleikamp, and Nathan Lynch for keeping machines
	alive despite my heavy abuse^Wtesting.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 21:56:04 +01:00
Steven Rostedt
6a60dd121c ftrace: split out hardirq ftrace code into own header
Impact: moving of function prototypes into own header file

ftrace.h is too big of a file for hardirq.h, and some archs will fail
to build because of the include dependencies not being met.

This patch pulls out the required prototypes for hardirq.h into a smaller
and safer ftrace_irq.h file.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06 22:20:46 +01:00
Steven Rostedt
7e5e26a3d8 ftrace: fix hardirq header for non ftrace archs
Impact: build fix for non-ftrace architectures

Not all archs implement ftrace, and therefore do not have an asm/ftrace.h.
This patch corrects the problem.

The ftrace_nmi_enter/exit now must be defined for all archs that implement
dynamic ftrace. Currently, only x86 does.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-03 11:03:43 +01:00
Steven Rostedt
17666f02b1 ftrace: nmi safe code modification
Impact: fix crashes that can occur in NMI handlers, if their code is modified

Modifying code is something that needs special care. On SMP boxes,
if code that is being modified is also being executed on another CPU,
that CPU will have undefined results.

The dynamic ftrace uses kstop_machine to make the system act like a
uniprocessor system. But this does not address NMIs, that can still
run on other CPUs.

One approach to handle this is to make all code that are used by NMIs
not be traced. But NMIs can call notifiers that spread throughout the
kernel and this will be very hard to maintain, and the chance of missing
a function is very high.

The approach that this patch takes is to have the NMIs modify the code
if the modification is taking place. The way this works is that just
writing to code executing on another CPU is not harmful if what is
written is the same as what exists.

Two buffers are used: an IP buffer and a "code" buffer.

The steps that the patcher takes are:

 1) Put in the instruction pointer into the IP buffer
    and the new code into the "code" buffer.
 2) Set a flag that says we are modifying code
 3) Wait for any running NMIs to finish.
 4) Write the code
 5) clear the flag.
 6) Wait for any running NMIs to finish.

If an NMI is executed, it will also write the pending code.
Multiple writes are OK, because what is being written is the same.
Then the patcher must wait for all running NMIs to finish before
going to the next line that must be patched.

This is basically the RCU approach to code modification.

Thanks to Ingo Molnar for suggesting the idea, and to Arjan van de Ven
for his guidence on what is safe and what is not.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30 21:30:08 +01:00
Linus Torvalds
8e3e076c5a BKL: revert back to the old spinlock implementation
The generic semaphore rewrite had a huge performance regression on AIM7
(and potentially other BKL-heavy benchmarks) because the generic
semaphores had been rewritten to be simple to understand and fair.  The
latter, in particular, turns a semaphore-based BKL implementation into a
mess of scheduling.

The attempt to fix the performance regression failed miserably (see the
previous commit 00b41ec261 'Revert
"semaphore: fix"'), and so for now the simple and sane approach is to
instead just go back to the old spinlock-based BKL implementation that
never had any issues like this.

This patch also has the advantage of being reported to fix the
regression completely according to Yanmin Zhang, unlike the semaphore
hack which still left a couple percentage point regression.

As a spinlock, the BKL obviously has the potential to be a latency
issue, but it's not really any different from any other spinlock in that
respect.  We do want to get rid of the BKL asap, but that has been the
plan for several years.

These days, the biggest users are in the tty layer (open/release in
particular) and Alan holds out some hope:

  "tty release is probably a few months away from getting cured - I'm
   afraid it will almost certainly be the very last user of the BKL in
   tty to get fixed as it depends on everything else being sanely locked."

so while we're not there yet, we do have a plan of action.

Tested-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Alexander Viro <viro@ftp.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-10 20:58:02 -07:00
Jonathan Corbet
8c703d35fa in_atomic(): document why it is unsuitable for general use
Discourage people from inappropriately using in_atomic()

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:45:21 -07:00
Steven Rostedt
2232c2d8e0 rcu: add support for dynamic ticks and preempt rcu
The PREEMPT-RCU can get stuck if a CPU goes idle and NO_HZ is set. The
idle CPU will not progress the RCU through its grace period and a
synchronize_rcu my get stuck. Without this patch I have a box that will
not boot when PREEMPT_RCU and NO_HZ are set. That same box boots fine
with this patch.

This patch comes from the -rt kernel where it has been tested for
several months.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-29 18:46:50 +01:00
Ingo Molnar
6478d8800b sched: remove the !PREEMPT_BKL code
remove the !PREEMPT_BKL code.

this removes 160 lines of legacy code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:33 +01:00
Ingo Molnar
4da1ce6d9c sched: add in_atomic_preempt_off()
add in_atomic_preempt_off() - debugging helper that will
simplify schedule().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 18:51:58 +02:00
Thomas Gleixner
79bf2bb335 [PATCH] tick-management: dyntick / highres functionality
With Ingo Molnar <mingo@elte.hu>

Add functions to provide dynamic ticks and high resolution timers.  The code
which keeps track of jiffies and handles the long idle periods is shared
between tick based and high resolution timer based dynticks.  The dyntick
functionality can be disabled on the kernel commandline.  Provide also the
infrastructure to support high resolution timers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Ingo Molnar
dde4b2b5f4 [PATCH] uninline irq_enter()
Uninline irq_enter().  [dynticks adds more stuff to it]

No functional changes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Eric W. Biederman
23d0b8b053 [PATCH] genirq: irq: generalize the check for HARDIRQ_BITS
This patch adds support for systems that cannot receive every interrupt on a
single cpu simultaneously, in the check to see if we have enough HARDIRQ_BITS.

MAX_HARDIRQS_PER_CPU becomes the count of the maximum number of hardare
generated interrupts per cpu.

On architectures that support per cpu interrupt delivery this can be a
significant space savings and scalability bonus.

This patch adds support for systems that cannot receive every interrupt on

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rajesh Shah <rajesh.shah@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:28 -07:00
Ingo Molnar
fbb9ce9530 [PATCH] lockdep: core
Do 'make oldconfig' and accept all the defaults for new config options -
reboot into the kernel and if everything goes well it should boot up fine and
you should have /proc/lockdep and /proc/lockdep_stats files.

Typically if the lock validator finds some problem it will print out
voluminous debug output that begins with "BUG: ..." and which syslog output
can be used by kernel developers to figure out the precise locking scenario.

What does the lock validator do?  It "observes" and maps all locking rules as
they occur dynamically (as triggered by the kernel's natural use of spinlocks,
rwlocks, mutexes and rwsems).  Whenever the lock validator subsystem detects a
new locking scenario, it validates this new rule against the existing set of
rules.  If this new rule is consistent with the existing set of rules then the
new rule is added transparently and the kernel continues as normal.  If the
new rule could create a deadlock scenario then this condition is printed out.

When determining validity of locking, all possible "deadlock scenarios" are
considered: assuming arbitrary number of CPUs, arbitrary irq context and task
context constellations, running arbitrary combinations of all the existing
locking scenarios.  In a typical system this means millions of separate
scenarios.  This is why we call it a "locking correctness" validator - for all
rules that are observed the lock validator proves it with mathematical
certainty that a deadlock could not occur (assuming that the lock validator
implementation itself is correct and its internal data structures are not
corrupted by some other kernel subsystem).  [see more details and conditionals
of this statement in include/linux/lockdep.h and
Documentation/lockdep-design.txt]

Furthermore, this "all possible scenarios" property of the validator also
enables the finding of complex, highly unlikely multi-CPU multi-context races
via single single-context rules, increasing the likelyhood of finding bugs
drastically.  In practical terms: the lock validator already found a bug in
the upstream kernel that could only occur on systems with 3 or more CPUs, and
which needed 3 very unlikely code sequences to occur at once on the 3 CPUs.
That bug was found and reported on a single-CPU system (!).  So in essence a
race will be found "piecemail-wise", triggering all the necessary components
for the race, without having to reproduce the race scenario itself!  In its
short existence the lock validator found and reported many bugs before they
actually caused a real deadlock.

To further increase the efficiency of the validator, the mapping is not per
"lock instance", but per "lock-class".  For example, all struct inode objects
in the kernel have inode->inotify_mutex.  If there are 10,000 inodes cached,
then there are 10,000 lock objects.  But ->inotify_mutex is a single "lock
type", and all locking activities that occur against ->inotify_mutex are
"unified" into this single lock-class.  The advantage of the lock-class
approach is that all historical ->inotify_mutex uses are mapped into a single
(and as narrow as possible) set of locking rules - regardless of how many
different tasks or inode structures it took to build this set of rules.  The
set of rules persist during the lifetime of the kernel.

To see the rough magnitude of checking that the lock validator does, here's a
portion of /proc/lockdep_stats, fresh after bootup:

 lock-classes:                            694 [max: 2048]
 direct dependencies:                  1598 [max: 8192]
 indirect dependencies:               17896
 all direct dependencies:             16206
 dependency chains:                    1910 [max: 8192]
 in-hardirq chains:                      17
 in-softirq chains:                     105
 in-process chains:                    1065
 stack-trace entries:                 38761 [max: 131072]
 combined max dependencies:         2033928
 hardirq-safe locks:                     24
 hardirq-unsafe locks:                  176
 softirq-safe locks:                     53
 softirq-unsafe locks:                  137
 irq-safe locks:                         59
 irq-unsafe locks:                      176

The lock validator has observed 1598 actual single-thread locking patterns,
and has validated all possible 2033928 distinct locking scenarios.

More details about the design of the lock validator can be found in
Documentation/lockdep-design.txt, which can also found at:

   http://redhat.com/~mingo/lockdep-patches/lockdep-design.txt

[bunk@stusta.de: cleanups]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:03 -07:00
Ingo Molnar
de30a2b355 [PATCH] lockdep: irqtrace subsystem, core
Accurate hard-IRQ-flags and softirq-flags state tracing.

This allows us to attach extra functionality to IRQ flags on/off
events (such as trace-on/off).

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:03 -07:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Martin Schwidefsky
1f1c12afe5 [PATCH] s390: cputime misaccounting
finish_arch_switch needs to update the user cpu time as well, not just the
system cpu time.  Otherwise the partial user cpu time of a process that is
stored in the lowcore will be (mis-)accounted to the next process.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:27:09 -08:00
Al Viro
f037360f2e [PATCH] m68k: thread_info header cleanup
a) in smp_lock.h #include of sched.h and spinlock.h moved under #ifdef
   CONFIG_LOCK_KERNEL.

b) interrupt.h now explicitly pulls sched.h (not via smp_lock.h from
   hardirq.h as it used to)

c) in three more places we need changes to compensate for (a) - one place
   in arch/sparc needs string.h now, hardirq.h needs forward declaration of
   task_struct and preempt.h needs direct include of thread_info.h.

d) thread_info-related helpers in sched.h and thread_info.h put under
   ifndef __HAVE_THREAD_FUNCTIONS.  Obviously safe.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13 18:14:13 -08:00
Randy Dunlap
67bc4eb0b1 [PATCH] hardirq uses preempt
hardirq.h uses preempt_count() from preempt.h

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 16:01:03 -07:00
Paolo 'Blaisorblade' Giarrusso
8f28e8fa46 [PATCH] irq code: Add coherence test for PREEMPT_ACTIVE
After porting this fixlet to UML:

http://linux.bkbits.net:8080/linux-2.5/cset@41791ab52lfMuF2i3V-eTIGRBbDYKQ

, I've also added a warning which should refuse compilation with insane values
for PREEMPT_ACTIVE...  maybe we should simply move PREEMPT_ACTIVE out of
architectures using GENERIC_IRQS.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-28 16:46:14 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00