If the server is unavaliable, we want to allow the revalidating
lookup to time out, and to default to validating the cached dentry
if the 'softreval' mount option is set.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We find a bug when running test under nfsv3 as below.
1)
chacl u::r--,g::rwx,o:rw- file1
2)
chmod u+w file1
3)
chacl -l file1
We expect u::rw-, but it shows u::r--, more likely it returns the
cached acl in inode.
We dig the code find that the code path is different.
chacl->..->__nfs3_proc_setacls->nfs_zap_acl_cache
Then nfs_zap_acl_cache clears the NFS_INO_INVALID_ACL in
NFS_I(inode)->cache_validity.
chmod->..->nfs3_proc_setattr
Because NFS_INO_INVALID_ACL has been cleared by chacl path,
nfs_zap_acl_cache wont be called.
nfs_setattr_update_inode will set NFS_INO_INVALID_ACL so let it
before nfs_zap_acl_cache call.
Signed-off-by: Su Yanjun <suyanjun218@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ever since the commit 0e0cb35b41, it's possible to lose an open stateid
while retrying a CLOSE due to ERR_OLD_STATEID. Once that happens,
operations that require openstateid fail with EAGAIN which is propagated
to the application then tests like generic/446 and generic/168 fail with
"Resource temporarily unavailable".
Instead of returning this error, initiate state recovery when possible to
recover the open stateid and then try calling nfs4_select_rw_stateid()
again.
Fixes: 0e0cb35b41 ("NFSv4: Handle NFS4ERR_OLD_STATEID in CLOSE/OPEN_DOWNGRADE")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For the krb5i and krb5p mount, it was problematic to truncate the
received ACL to the provided buffer because an integrity check
could not be preformed.
Instead, provide enough pages to accommodate the largest buffer
bounded by the largest RPC receive buffer size.
Note: I don't think it's possible for the ACL to be truncated now.
Thus NFS4_ACL_TRUNC flag and related code could be possibly
removed but since I'm unsure, I'm leaving it.
v2: needs +1 page.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add a mount option 'softreval' that allows attribute revalidation 'getattr'
calls to time out, and causes them to fall back to using the cached
attributes.
The use case for this option is for ensuring that we can still (slowly)
traverse paths and use cached information even when the server is down.
Once the server comes back up again, the getattr calls start succeeding,
and the caches will revalidate as usual.
The 'softreval' mount option is automatically enabled if you have
specified 'softerr'. It can be turned off using the options
'nosoftreval', or 'hard'.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we've already revalidated the inode once then don't distrust the
access cache unless the NFS_INO_INVALID_ACCESS flag is actually set.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The 'hdr->good_bytes' is defined as the number of bytes we expect to
read or write starting at offset hdr->io_start. In the case of a partial
read/write we may end up adjusting hdr->args.offset and hdr->args.count
to skip I/O for data that was already read/written, and so we must ensure
the calculation takes that into account.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we're resending a write due to a short read or write, ensure we
reset the reply count to zero.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
On exit from nfs_do_access(), record the mask representing the requested
permissions, as well as the server-supplied set of access rights for
this user.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up the generic file commit tracepoints to use a 64-bit value
for the verifier, and to display the pNFS filehandle, if it exists.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up the generic writeback tracepoints so they do pass the
full structures as arguments. Also ensure we report the number
of bytes actually written.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up the generic file read tracepoints so they do pass the
full structures as arguments. Also ensure we report the number
of bytes actually read.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the attempt to do pNFS fails, then record what action we
take to recover (resend, reset to pnfs or reset to mds).
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Casting a negative value to an unsigned long is not the same as
converting it to its absolute value.
Fixes: 96650e2eff ("NFS: Fix show_nfs_errors macros again")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure we always return the number of bytes read/written. Also display
the pnfs filehandle if it is in use.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of making assumptions about the commit verifier contents, change
the commit code to ensure we always check that the verifier was set
by the XDR code.
Fixes: f54bcf2ece ("pnfs: Prepare for flexfiles by pulling out common code")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Don't clear the NFS_CONTEXT_RESEND_WRITES flag until after calling
nfs_commit_inode(). Otherwise, if nfs_commit_inode() returns an
error, we end up with dirty pages in the page cache, but no tag
to tell us that those pages need resending.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Remove gss_mech_list_pseudoflavors() and its callers. This is part of
an unused API, and could leak an RCU reference if it were ever called.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If a write or commit failed, and the mapping sees a fatal error, we
need to revalidate the contents of that mapping.
Fixes: 06c9fdf3b9 ("NFS: On fatal writeback errors, we need to call nfs_inode_remove_request()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we suffer a fatal error upon writing a file, which causes us to
need to revalidate the entire mapping, then we should also revalidate
the file size.
Fixes: d2ceb7e570 ("NFS: Don't use page_file_mapping after removing the page")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: This simplifies the logic in rpcrdma_post_recvs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To safely get rid of all rpcrdma_reps from a particular connection
instance, xprtrdma has to wait until each of those reps is finished
being used. A rep may be backing the rq_rcv_buf of an RPC that has
just completed, for example.
Since it is safe to invoke rpcrdma_rep_destroy() only in the Receive
completion handler, simply mark reps remaining in the rb_all_reps
list after the transport is drained. These will then be deleted as
rpcrdma_post_recvs pulls them off the rep free list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This reduces the hardware and memory footprint of an unconnected
transport.
At some point in the future, transport reconnect will allow
resolving the destination IP address through a different device. The
current change enables reps for the new connection to be allocated
on whichever NUMA node the new device affines to after a reconnect.
Note that this does not destroy _all_ the transport's reps... there
will be a few that are still part of a running RPC completion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently the underlying RDMA device is chosen at transport set-up
time. But it will soon be at connect time instead.
The maximum size of a transport header is based on device
capabilities. Thus transport header buffers have to be allocated
_after_ the underlying device has been chosen (via address and route
resolution); ie, in the connect worker.
Thus, move the allocation of transport header buffers to the connect
worker, after the point at which the underlying RDMA device has been
chosen.
This also means the RDMA device is available to do a DMA mapping of
these buffers at connect time, instead of in the hot I/O path. Make
that optimization as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor: Perform the "is supported" check in rpcrdma_ep_create()
instead of in rpcrdma_ia_open(). frwr_open() is where most of the
logic to query device attributes is already located.
The current code displays a redundant error message when the device
does not support FRWR. As an additional clean-up, this patch removes
the extra message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To support device hotplug and migrating a connection between devices
of different capabilities, we have to guarantee that all in-kernel
devices can support the same max NFS payload size (1 megabyte).
This means that possibly one or two in-tree devices are no longer
supported for NFS/RDMA because they cannot support 1MB rsize/wsize.
The only one I confirmed was cxgb3, but it has already been removed
from the kernel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: there is no need to keep two copies of the same value.
Also, in subsequent patches, rpcrdma_ep_create() will be called in
the connect worker rather than at set-up time.
Minor fix: Initialize the transport's sendctx to the value based on
the capabilities of the underlying device, not the maximum setting.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The size of the sendctx queue depends on the value stored in
ia->ri_max_send_sges. This value is determined by querying the
underlying device.
Eventually, rpcrdma_ia_open() and rpcrdma_ep_create() will be called
in the connect worker rather than at transport set-up time. The
underlying device will not have been chosen device set-up time.
The sendctx queue will thus have to be created after the underlying
device has been chosen via address and route resolution; in other
words, in the connect worker.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean-up. The max_send_sge value also happens to be stored in
ep->rep_attr. Let's keep just a single copy.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently the allocation of buf is not being null checked and
a null pointer dereference can occur when the memory allocation fails.
Fix this by adding a check and returning -ENOMEM.
Addresses-Coverity: ("Dereference null return")
Fixes: 6d972518b821 ("NFS: Add fs_context support.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If CONFIG_SWAP=n, it does not make much sense to offer the user the
option to enable support for swapping over NFS, as that will still fail
at run time:
# swapon /swap
swapon: /swap: swapon failed: Function not implemented
Fix this by adding a dependency on CONFIG_SWAP.
Fixes: a564b8f039 ("nfs: enable swap on NFS")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The empty_iov structure is only copied into another structure,
so make it const.
The opportunity for this change was found using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
swapon over NFS does not go through generic_swapfile_activate
code path when setting up extents. This makes holes in NFS
swapfiles possible which is not expected for swapon.
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The xprtrdma connect logic can return -EPROTO if the underlying
device or network path does not support RDMA. This can happen
after a device removal/insertion.
- When SOFTCONN is set, EPROTO is a permanent error.
- When SOFTCONN is not set, EPROTO is treated as a temporary error.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This seems to be a somewhat common issue with Kerberos NFSv4.0
set-ups.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Try to capture the reason for the writeback path tagging an error on
a page.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In nfs3_proc_lookup, if nfs_alloc_fattr fails, will only print
"NFS call lookup". This may be confusing, move dprintk after
nfs_alloc_fattr.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
On 32-bit architectures, xdr_encode_nfstime4() needlessly
truncates timestamps to a 32-bit value in the range between
year 1902 and 2038.
Change it to use 'struct timespec64' to allow the entire range
of values supported by the server.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For NFSv2 and NFSv3, timestamps are stored using 32-bit entities
and overflow in y2038. For historic reasons we truncate the
64-bit timestamps by converting from a timespec64 to a timespec
first.
Remove this unnecessary conversion step and do the truncation
in the final functions that take a timestamp.
This is transparent to users, but avoids one of the last uses
of 'timespec' and lets us remove it later.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
nfs currently behaves differently on 32-bit and 64-bit kernels regarding
the on-disk format of nfs_fscache_inode_auxdata.
That format should really be the same on any kernel, and we should avoid
the 'timespec' type in order to remove that from the kernel later on.
Using plain 'timespec64' would not be good here, since that includes
implied padding and would possibly leak kernel stack data to the on-disk
format on 32-bit architectures.
struct __kernel_timespec would work as a replacement, but open-coding
the two struct members in nfs_fscache_inode_auxdata makes it more
obvious what's going on here, and keeps the current format for 64-bit
architectures.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Push down the use of timespec64 into NFS nfs_fattr, to avoid needless
conversions, and get closer to having 64-bit time_t support on 32-bit
NFSv4 and removing some old interfaces from the kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Using signed 32-bit types for UTC time leads to the y2038 overflow,
which is what happens in the sunrpc code at the moment.
This changes the sunrpc code over to use time64_t where possible.
The one exception is the gss_import_v{1,2}_context() function for
kerberos5, which uses 32-bit timestamps in the protocol. Here,
we can at least treat the numbers as 'unsigned', which extends the
range from 2038 to 2106.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Split out from commit "NFS: Add fs_context support."
Add wrappers nfs_errorf(), nfs_invalf(), and nfs_warnf() which log error
information to the fs_context. Convert some printk's to use these new
wrappers instead.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Split out from commit "NFS: Add fs_context support."
This patch adds additional refactoring for the conversion of NFS to use
fs_context, namely:
(*) Merge nfs_mount_info and nfs_clone_mount into nfs_fs_context.
nfs_clone_mount has had several fields removed, and nfs_mount_info
has been removed altogether.
(*) Various functions now take an fs_context as an argument instead
of nfs_mount_info, nfs_fs_context, etc.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add filesystem context support to NFS, parsing the options in advance and
attaching the information to struct nfs_fs_context. The highlights are:
(*) Merge nfs_mount_info and nfs_clone_mount into nfs_fs_context. This
structure represents NFS's superblock config.
(*) Make use of the VFS's parsing support to split comma-separated lists
(*) Pin the NFS protocol module in the nfs_fs_context.
(*) Attach supplementary error information to fs_context. This has the
downside that these strings must be static and can't be formatted.
(*) Remove the auxiliary file_system_type structs since the information
necessary can be conveyed in the nfs_fs_context struct instead.
(*) Root mounts are made by duplicating the config for the requested mount
so as to have the same parameters. Submounts pick up their parameters
from the parent superblock.
[AV -- retrans is u32, not string]
[SM -- Renamed cfg to ctx in a few functions in an earlier patch]
[SM -- Moved fs_context mount option parsing to an earlier patch]
[SM -- Moved fs_context error logging to a later patch]
[SM -- Fixed printks in nfs4_try_get_tree() and nfs4_get_referral_tree()]
[SM -- Added is_remount_fc() helper]
[SM -- Deferred some refactoring to a later patch]
[SM -- Fixed referral mounts, which were broken in the original patch]
[SM -- Fixed leak of nfs_fattr when fs_context is freed]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Split out from commit "NFS: Add fs_context support."
Convert existing mount option definitions to fs_parameter_enum's and
fs_parameter_spec's. Parse mount options using fs_parse() and
lookup_constant().
Notes:
1) Fixed a typo in the udp6 definition in nfs_xprt_protocol_tokens
from the original commit.
2) fs_parse() expects an fs_context as the first arg so that any
errors can be logged to the fs_context. We're passing NULL for the
fs_context (this will change in commit "NFS: Add fs_context support.")
which is okay as it will cause logfc() to do a printk() instead.
3) fs_parse() expects an fs_paramter as the third arg. We're
building an fs_parameter manually in nfs_fs_context_parse_option(),
which will go away in commit "NFS: Add fs_context support.".
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Split out from commit "NFS: Add fs_context support."
Rename cfg to ctx in nfs_init_server(), nfs_verify_authflavors(),
and nfs_request_mount(). No functional changes.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Trond Myklebust