commit 090ddad4c7 upstream.
The recent code refactoring for HD-audio HDMI codec driver caused a
regression on AMD/ATI HDMI codecs; namely, PulseAudioand pipewire
don't recognize HDMI outputs any longer while the direct output via
ALSA raw access still works.
The problem turned out that, after the code refactoring, the driver
assumes only the dynamic PCM assignment, and when a PCM stream that
still isn't assigned to any pin gets opened, the driver tries to
assign any free converter to the PCM stream. This behavior is OK for
Intel and other codecs, as they have arbitrary connections between
pins and converters. OTOH, on AMD chips that have a 1:1 mapping
between pins and converters, this may end up with blocking the open of
the next PCM stream for the pin that is tied with the formerly taken
converter.
Also, with the code refactoring, more PCM streams are exposed than
necessary as we assume all converters can be used, while this isn't
true for AMD case. This may change the PCM stream assignment and
confuse users as well.
This patch fixes those problems by:
- Introducing a flag spec->static_pcm_mapping, and if it's set, the
driver applies the static mapping between pins and converters at the
probe time
- Limiting the number of PCM streams per pins, too; this avoids the
superfluous PCM streams
Fixes: ef6f5494fa ("ALSA: hda/hdmi: Use only dynamic PCM device allocation")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216836
Co-developed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20221228125714.16329-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8800d324a upstream.
Correctly calculate available space including the size of the chunk
buffer. This fixes a buffer overflow when multiple MIDI sysex
messages are sent to a PODxt device.
Signed-off-by: Artem Egorkine <arteme@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221225105728.1153989-2-arteme@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8508fa2e74 upstream.
A PODxt device sends 0xb2, 0xc2 or 0xf2 as a status byte for MIDI
messages over USB that should otherwise have a 0xb0, 0xc0 or 0xf0
status byte. This is usually corrected by the driver on other OSes.
This fixes MIDI sysex messages sent by PODxt.
[ tiwai: fixed white spaces ]
Signed-off-by: Artem Egorkine <arteme@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221225105728.1153989-1-arteme@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 456b59e757 upstream.
ovl_change_flags() is an open-coded variant of fs/fcntl.c:setfl() and it
got missed by commit 164f4064ca ("keep iocb_flags() result cached in
struct file"); the same change applies there.
Reported-by: Pierre Labastie <pierre.labastie@neuf.fr>
Fixes: 164f4064ca ("keep iocb_flags() result cached in struct file")
Cc: <stable@vger.kernel.org> # v6.0
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216738
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b0db51215 upstream.
There is a wrong case of link() on overlay:
$ mkdir /lower /fuse /merge
$ mount -t fuse /fuse
$ mkdir /fuse/upper /fuse/work
$ mount -t overlay /merge -o lowerdir=/lower,upperdir=/fuse/upper,\
workdir=work
$ touch /merge/file
$ chown bin.bin /merge/file // the file's caller becomes "bin"
$ ln /merge/file /merge/lnkfile
Then we will get an error(EACCES) because fuse daemon checks the link()'s
caller is "bin", it denied this request.
In the changing history of ovl_link(), there are two key commits:
The first is commit bb0d2b8ad2 ("ovl: fix sgid on directory") which
overrides the cred's fsuid/fsgid using the new inode. The new inode's
owner is initialized by inode_init_owner(), and inode->fsuid is
assigned to the current user. So the override fsuid becomes the
current user. We know link() is actually modifying the directory, so
the caller must have the MAY_WRITE permission on the directory. The
current caller may should have this permission. This is acceptable
to use the caller's fsuid.
The second is commit 51f7e52dc9 ("ovl: share inode for hard link")
which removed the inode creation in ovl_link(). This commit move
inode_init_owner() into ovl_create_object(), so the ovl_link() just
give the old inode to ovl_create_or_link(). Then the override fsuid
becomes the old inode's fsuid, neither the caller nor the overlay's
mounter! So this is incorrect.
Fix this bug by using ovl mounter's fsuid/fsgid to do underlying
fs's link().
Link: https://lore.kernel.org/all/20220817102952.xnvesg3a7rbv576x@wittgenstein/T
Link: https://lore.kernel.org/lkml/20220825130552.29587-1-zhangtianci.1997@bytedance.com/t
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Fixes: 51f7e52dc9 ("ovl: share inode for hard link")
Cc: <stable@vger.kernel.org> # v4.8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e555c85792 upstream.
After we introduced a module parameter and quirk infrastructure for
picking the Microsoft GUID over the SOC vendor GUID we discovered
that lots and lots of systems are getting this wrong.
The table continues to grow, and is becoming unwieldy.
We don't really have any benefit to forcing vendors to populate the
AMD GUID. This is just extra work, and more and more vendors seem
to mess it up. As the Microsoft GUID is used by Windows as well,
it's very likely that it won't be messed up like this.
So drop all the quirks forcing it and the Rembrandt behavior. This
means that Cezanne or later effectively only run the Microsoft GUID
codepath with the exception of HP Elitebook 8*5 G9.
Fixes: fd894f05cf ("ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt")
Cc: stable@vger.kernel.org # 6.1
Reported-by: Benjamin Cheng <ben@bcheng.me>
Reported-by: bilkow@tutanota.com
Reported-by: Paul <paul@zogpog.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2292
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216768
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ea45390e9 upstream.
HP Elitebook 865 supports both the AMD GUID w/ _REV 2 and Microsoft
GUID with _REV 0. Both have very similar code but the AMD GUID
has a special workaround that is specific to a problem with
spurious wakeups on systems with Qualcomm WLAN.
This is believed to be a bug in the Qualcomm WLAN F/W (it doesn't
affect any other WLAN H/W). If this WLAN firmware is fixed this
quirk can be dropped.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f2b5debc0 upstream.
Despite specifying UID and GID in mount command, the specified UID and GID
were not being assigned. This patch fixes this issue.
Link: https://lkml.kernel.org/r/C0264BF5-059C-45CF-B8DA-3A3BD2C803A2@live.com
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99b3b83785 upstream.
There is a case found when triggering a panic_on_oom, pstore fails to dump
kmsg. Because psz_kmsg_write_record can't get the new buffer.
Handle this by using GFP_ATOMIC to allocate a buffer at lower watermark.
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Fixes: 335426c6dc ("pstore/zone: Provide way to skip "broken" zone for MTD devices")
Cc: WeiXiong Liao <gmpy.liaowx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/CAJRQjofRCF7wjrYmw3D7zd5QZnwHQq+F8U-mJDJ6NZ4bddYdLA@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit beca3e311a upstream.
If mem-type is specified in the device tree
it would end up overriding the record_size
field instead of populating mem_type.
As record_size is currently parsed after the
improper assignment with default size 0 it
continued to work as expected regardless of the
value found in the device tree.
Simply changing the target field of the struct
is enough to get mem-type working as expected.
Fixes: 9d843e8faf ("pstore: Add mem_type property DT parsing support")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Stefani <luca@osomprivacy.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221222131049.286288-1-luca@osomprivacy.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ba594d700 upstream.
USB support can be in a loadable module, and this causes a link failure
with KMSAN:
ERROR: modpost: "kmsan_handle_urb" [drivers/usb/core/usbcore.ko] undefined!
Export the symbol so it can be used by this module.
Link: https://lkml.kernel.org/r/20221215162710.3802378-1-arnd@kernel.org
Fixes: 553a80188a ("kmsan: handle memory sent to/from USB")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38ce7c9bdf upstream.
When encountering any vma in the range with policy other than MPOL_BIND or
MPOL_PREFERRED_MANY, an error is returned without issuing a mpol_put on
the policy just allocated with mpol_dup().
This allows arbitrary users to leak kernel memory.
Link: https://lkml.kernel.org/r/20221215194621.202816-1-mathieu.desnoyers@efficios.com
Fixes: c6018b4b25 ("mm/mempolicy: add set_mempolicy_home_node syscall")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f12be792f upstream.
Since 6.1 we have noticed random rpm install failures that were tracked to
mremap() returning -ENOMEM and to commit ca3d76b0aa ("mm: add merging
after mremap resize").
The problem occurs when mremap() expands a VMA in place, but using an
starting address that's not vma->vm_start, but somewhere in the middle.
The extension_pgoff calculation introduced by the commit is wrong in that
case, so vma_merge() fails due to pgoffs not being compatible. Fix the
calculation.
By the way it seems that the situations, where rpm now expands a vma from
the middle, were made possible also due to that commit, thanks to the
improved vma merging. Yet it should work just fine, except for the buggy
calculation.
Link: https://lkml.kernel.org/r/20221216163227.24648-1-vbabka@suse.cz
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1206359
Fixes: ca3d76b0aa ("mm: add merging after mremap resize")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jakub Matěna <matenajakub@gmail.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c0908d8e4 upstream.
Jan Kara reported the following bug triggering on 6.0.5-rt14 running dbench
on XFS on arm64.
kernel BUG at fs/inode.c:625!
Internal error: Oops - BUG: 0 [#1] PREEMPT_RT SMP
CPU: 11 PID: 6611 Comm: dbench Tainted: G E 6.0.0-rt14-rt+ #1
pc : clear_inode+0xa0/0xc0
lr : clear_inode+0x38/0xc0
Call trace:
clear_inode+0xa0/0xc0
evict+0x160/0x180
iput+0x154/0x240
do_unlinkat+0x184/0x300
__arm64_sys_unlinkat+0x48/0xc0
el0_svc_common.constprop.4+0xe4/0x2c0
do_el0_svc+0xac/0x100
el0_svc+0x78/0x200
el0t_64_sync_handler+0x9c/0xc0
el0t_64_sync+0x19c/0x1a0
It also affects 6.1-rc7-rt5 and affects a preempt-rt fork of 5.14 so this
is likely a bug that existed forever and only became visible when ARM
support was added to preempt-rt. The same problem does not occur on x86-64
and he also reported that converting sb->s_inode_wblist_lock to
raw_spinlock_t makes the problem disappear indicating that the RT spinlock
variant is the problem.
Which in turn means that RT mutexes on ARM64 and any other weakly ordered
architecture are affected by this independent of RT.
Will Deacon observed:
"I'd be more inclined to be suspicious of the slowpath tbh, as we need to
make sure that we have acquire semantics on all paths where the lock can
be taken. Looking at the rtmutex code, this really isn't obvious to me
-- for example, try_to_take_rt_mutex() appears to be able to return via
the 'takeit' label without acquire semantics and it looks like we might
be relying on the caller's subsequent _unlock_ of the wait_lock for
ordering, but that will give us release semantics which aren't correct."
Sebastian Andrzej Siewior prototyped a fix that does work based on that
comment but it was a little bit overkill and added some fences that should
not be necessary.
The lock owner is updated with an IRQ-safe raw spinlock held, but the
spin_unlock does not provide acquire semantics which are needed when
acquiring a mutex.
Adds the necessary acquire semantics for lock owner updates in the slow path
acquisition and the waiter bit logic.
It successfully completed 10 iterations of the dbench workload while the
vanilla kernel fails on the first iteration.
[ bigeasy@linutronix.de: Initial prototype fix ]
Fixes: 700318d1d7 ("locking/rtmutex: Use acquire/release semantics")
Fixes: 23f78d4a03 ("[PATCH] pi-futex: rt mutex core")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221202100223.6mevpbl7i6x5udfd@techsingularity.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3d57f36c89 ]
I no longer work for Plantronics (aka Poly, aka HP) and do not have
access to the headsets in order to test. However, as noted by Maxim,
the other 32xx models that share the same base code set as the 3220
would need the same quirk. This patch adds the PIDs for the rest of
the Blackwire 32XX product family that require the quirk.
Plantronics Blackwire 3210 Series (047f:c055)
Plantronics Blackwire 3215 Series (047f:c057)
Plantronics Blackwire 3225 Series (047f:c058)
Quote from previous patch by Maxim Mikityanskiy
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
End quote
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4eab1c2fe0 ]
The HID descriptor of this device contains two mouse collections, one
for mouse emulation and the other for the trackpoint.
Both collections get merged and, because the first one defines X and Y,
the movemenent events reported by the trackpoint collection are
ignored.
Set the MT_CLS_WIN_8_FORCE_MULTI_INPUT class for this device to be able
to receive its reports.
This fix is similar to/based on commit 40d5bb8737 ("HID: multitouch:
enable multi-input as a quirk for some devices").
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/825
Reported-by: Akito <the@akito.ooo>
Tested-by: Akito <the@akito.ooo>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b7ddab8a1 ]
Default value of maxactive is set as num_possible_cpus() for nonpreemptable
systems. For a 2-core system, only 2 kretprobe instances would be allocated
in default, then these 2 instances for execve kretprobe are very likely to
be used up with a pipelined command.
Here's the testcase: a shell script was added to crontab, and the content
of the script is:
#!/bin/sh
do_something_magic `tr -dc a-z < /dev/urandom | head -c 10`
cron will trigger a series of program executions (4 times every hour). Then
events loss would be noticed normally after 3-4 hours of testings.
The issue is caused by a burst of series of execve requests. The best number
of kretprobe instances could be different case by case, and should be user's
duty to determine, but num_possible_cpus() as the default value is inadequate
especially for systems with small number of cpus.
This patch enables the logic for preemption as default, thus increases the
minimum of maxactive to 10 for nonpreemptable systems.
Link: https://lore.kernel.org/all/20221110081502.492289-1-wuqiang.matt@bytedance.com/
Signed-off-by: wuqiang <wuqiang.matt@bytedance.com>
Reviewed-by: Solar Designer <solar@openwall.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75333d48f9 ]
Problem caused by source's vfsmount being unmounted but remains
on the delayed unmount list. This happens when nfs42_ssc_open()
return errors.
Fixed by removing nfsd4_interssc_connect(), leave the vfsmount
for the laundromat to unmount when idle time expires.
We don't need to call nfs_do_sb_deactive when nfs42_ssc_open
return errors since the file was not opened so nfs_server->active
was not incremented. Same as in nfsd4_copy, if we fail to
launch nfsd4_do_async_copy thread then there's no need to
call nfs_do_sb_deactive
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21b8a1dd56 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
msc313_rtc_probe() was passing clk_disable_unprepare() directly, which
did not have matching prototypes for devm_add_action_or_reset()'s
callback argument. Refactor to use devm_clk_get_enabled() instead.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202211041527.HD8TLSE1-lkp@intel.com
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Daniel Palmer <daniel@thingy.jp>
Cc: Romain Perier <romain.perier@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rtc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Daniel Palmer <daniel@thingy.jp>
Tested-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20221202184525.gonna.423-kees@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed2213bfb1 ]
rtas_os_term() is called during panic. Its behavior depends on a couple
of conditions in the /rtas node of the device tree, the traversal of
which entails locking and local IRQ state changes. If the kernel panics
while devtree_lock is held, rtas_os_term() as currently written could
hang.
Instead of discovering the relevant characteristics at panic time,
cache them in file-static variables at boot. Note the lookup for
"ibm,extended-os-term" is converted to of_property_read_bool() since it
is a boolean property, not an RTAS function token.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Incorporate suggested change from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00ef8885a9 ]
If the system is rebooted via isr(), the IRQ handler might
be triggered before the domain is initialized. Resulting on
an invalid memory access error.
Fix:
[ 0.500930] Unable to handle kernel read from unreadable memory at virtual address 0000000000000070
[ 0.501166] Call trace:
[ 0.501174] report_iommu_fault+0x28/0xfc
[ 0.501180] mtk_iommu_isr+0x10c/0x1c0
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20221125-mtk-iommu-v2-0-e168dff7d43e@chromium.org
[ joro: Fixed spelling in commit message ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efb11fdb3e ]
find_insn() will return NULL in case of failure. Check insn in order
to avoid a kernel Oops for NULL pointer dereference.
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-9-sv@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecfbd57cf9 ]
When PAGE_SIZE is 64K, if read_log_page is called by log_read_rst for
the first time, the size of *buffer would be equal to
DefaultLogPageSize(4K).But for *buffer operations like memcpy,
if the memory area size(n) which being assigned to buffer is larger
than 4K (log->page_size(64K) or bytes(64K-page_off)), it will cause
an out of boundary error.
Call trace:
[...]
kasan_report+0x44/0x130
check_memory_region+0xf8/0x1a0
memcpy+0xc8/0x100
ntfs_read_run_nb+0x20c/0x460
read_log_page+0xd0/0x1f4
log_read_rst+0x110/0x75c
log_replay+0x1e8/0x4aa0
ntfs_loadlog_and_replay+0x290/0x2d0
ntfs_fill_super+0x508/0xec0
get_tree_bdev+0x1fc/0x34c
[...]
Fix this by setting variable r_page to NULL in log_read_rst.
Signed-off-by: Yin Xiujiang <yinxiujiang@kylinos.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 658015167a ]
There were two patches which addressed the same bug and added the same
condition:
commit 6db620863f ("fs/ntfs3: Validate data run offset")
commit 887bfc5460 ("fs/ntfs3: Fix slab-out-of-bounds read in run_unpack")
Delete one condition.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59bfd7a483 ]
syzbot is reporting too large allocation at ntfs_fill_super() [1], for a
crafted filesystem can contain bogus inode->i_size. Add __GFP_NOWARN in
order to avoid too large allocation warning, than exhausting memory by
using kvmalloc().
Link: https://syzkaller.appspot.com/bug?extid=33f3faaa0c08744f7d40 [1]
Reported-by: syzot <syzbot+33f3faaa0c08744f7d40@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d0f659bf7 ]
syzbot is reporting too large allocation at wnd_init() [1], for a crafted
filesystem can become wnd->nwnd close to UINT_MAX. Add __GFP_NOWARN in
order to avoid too large allocation warning, than exhausting memory by
using kvcalloc().
Link: https://syzkaller.appspot.com/bug?extid=fa4648a5446460b7b963 [1]
Reported-by: syzot <syzbot+fa4648a5446460b7b963@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f60740652 ]
The USB PHY used in the Allwinner H616 SoC inherits some traits from its
various predecessors: it has four full PHYs like the H3, needs some
extra bits to be set like the H6, and puts SIDDQ on a different bit like
the A100. Plus it needs this weird PHY2 quirk.
Name all those properties in a new config struct and assign a new
compatible name to it.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221031111358.3387297-5-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b45c6d8032 ]
At least the Allwinner H616 SoC requires a weird quirk to make most
USB PHYs work: Only port2 works out of the box, but all other ports
need some help from this port2 to work correctly: The CLK_BUS_PHY2 and
RST_USB_PHY2 clock and reset need to be enabled, and the SIDDQ bit in
the PMU PHY control register needs to be cleared. For this register to
be accessible, CLK_BUS_ECHI2 needs to be ungated. Don't ask ....
Instead of disguising this as some generic feature, treat it more like
a quirk (what it really is):
If the quirk bit is set, and we initialise a PHY other than PHY2, ungate
this one special clock, and clear the SIDDQ bit. We also pick the clock
and reset from PHY2 and enable them as well.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221031111358.3387297-4-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 887bfc5460 ]
Syzkaller reports slab-out-of-bounds bug as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in run_unpack+0x8b7/0x970 fs/ntfs3/run.c:944
Read of size 1 at addr ffff88801bbdff02 by task syz-executor131/3611
[...]
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
run_unpack+0x8b7/0x970 fs/ntfs3/run.c:944
run_unpack_ex+0xb0/0x7c0 fs/ntfs3/run.c:1057
ntfs_read_mft fs/ntfs3/inode.c:368 [inline]
ntfs_iget5+0xc20/0x3280 fs/ntfs3/inode.c:501
ntfs_loadlog_and_replay+0x124/0x5d0 fs/ntfs3/fsntfs.c:272
ntfs_fill_super+0x1eff/0x37f0 fs/ntfs3/super.c:1018
get_tree_bdev+0x440/0x760 fs/super.c:1323
vfs_get_tree+0x89/0x2f0 fs/super.c:1530
do_new_mount fs/namespace.c:3040 [inline]
path_mount+0x1326/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
The buggy address belongs to the physical page:
page:ffffea00006ef600 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1bbd8
head:ffffea00006ef600 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88801bbdfe00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88801bbdfe80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88801bbdff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88801bbdff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88801bbe0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Kernel will tries to read record and parse MFT from disk in
ntfs_read_mft().
Yet the problem is that during enumerating attributes in record,
kernel doesn't check whether run_off field loading from the disk
is a valid value.
To be more specific, if attr->nres.run_off is larger than attr->size,
kernel will passes an invalid argument run_buf_size in
run_unpack_ex(), which having an integer overflow. Then this invalid
argument will triggers the slab-out-of-bounds Read bug as above.
This patch solves it by adding the sanity check between
the offset to packed runs and attribute size.
link: https://lore.kernel.org/all/0000000000009145fc05e94bd5c3@google.com/#t
Reported-and-tested-by: syzbot+8d6fbb27a6aded64b25b@syzkaller.appspotmail.com
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a459f6933 ]
Mask out the "Command Supported" and "Logical Block Content Change" bits
and only defer execution of commands that have non-trivial effects to
the workqueue for synchronous execution. This allows to execute admin
commands asynchronously on controllers that provide a Command Supported
and Effects log page, and will keep allowing to execute Write commands
asynchronously once command effects on I/O commands are taken into
account.
Fixes: c1fef73f79 ("nvmet: add passthru code to process commands")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37e14e4f37 ]
Since kernel 5.3.4 my laptop (ICH8M controller) does not see Kingston
SV300S37A60G SSD disk connected into a SATA connector on wake from
suspend. The problem was introduced in c312ef1763 ("libata/ahci: Drop
PCS quirk for Denverton and beyond"): the quirk is not applied on wake
from suspend as it originally was.
It is worth to mention the commit contained another bug: the quirk is
not applied at all to controllers which require it. The fix commit
09d6ac8dc5 ("libata/ahci: Fix PCS quirk application") landed in 5.3.8.
So testing my patch anywhere between commits c312ef1763 and
09d6ac8dc5 is pointless.
Not all disks trigger the problem. For example nothing bad happens with
Western Digital WD5000LPCX HDD.
Test hardware:
- Acer 5920G with ICH8M SATA controller
- sda: some SATA HDD connnected into the DVD drive IDE port with a
SATA-IDE caddy. It is a boot disk
- sdb: Kingston SV300S37A60G SSD connected into the only SATA port
Sample "dmesg --notime | grep -E '^(sd |ata)'" output on wake:
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
ata1: FORCE: cable set to 80c
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata3.00: disabled
sd 2:0:0:0: rejecting I/O to offline device
ata3.00: detaching (SCSI 2:0:0:0)
sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 2:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
Commit c312ef1763 dropped ahci_pci_reset_controller() which internally
calls ahci_reset_controller() and applies the PCS quirk if needed after
that. It was called each time a reset was required instead of just
ahci_reset_controller(). This patch puts the function back in place.
Fixes: c312ef1763 ("libata/ahci: Drop PCS quirk for Denverton and beyond")
Signed-off-by: Adam Vodopjan <grozzly@protonmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 246cf66e30 ]
Commit 64dc8c732f ("block, bfq: fix possible uaf for 'bfqq->bic'")
will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq()
can free bfqq first, and then call bic_set_bfqq(), which will cause uaf.
Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq().
Fixes: 64dc8c732f ("block, bfq: fix possible uaf for 'bfqq->bic'")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20221226030605.1437081-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cf3b7f012 ]
The apple-gmux driver only binds to old GMUX devices which have an
IORESOURCE_IO resource (using inb()/outb()) rather then memory-mapped
IO (IORESOURCE_MEM).
T2 MacBooks use the new style GMUX devices (with IORESOURCE_MEM access),
so these are not supported by the apple-gmux driver. This is not a problem
since they have working ACPI video backlight support.
But the apple_gmux_present() helper only checks if an ACPI device with
the "APP000B" HID is present, causing acpi_video_get_backlight_type()
to return acpi_backlight_apple_gmux disabling the acpi_video backlight
device.
Add a new apple_gmux_backlight_present() helper which checks that
the "APP000B" device actually is an old GMUX device with an IORESOURCE_IO
resource.
This fixes the acpi_video0 backlight no longer registering on T2 MacBooks.
Note people are working to add support for the new style GMUX to Linux:
https://github.com/kekrby/linux-t2/commits/wip/hybrid-graphics
Once this lands this patch should be reverted so that
acpi_video_get_backlight_type() also prefers the gmux on new style GMUX
MacBooks, but for now this is necessary to avoid regressing backlight
control on T2 Macs.
Fixes: 21245df307 ("ACPI: video: Add Apple GMUX brightness control detection")
Reported-and-tested-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7203481fd1 ]
The Asus ExpertBook B2502 has the same keyboard issue as Asus Vivobook
K3402ZA/K3502ZA. The kernel overrides IRQ 1 to Edge_High when it
should be Active_Low.
This patch adds the ExpertBook B2502 model to the existing
quirk list of Asus laptops with this issue.
Fixes: b5f9223a10 ("ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2142574
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>