1215147 Commits
Author | SHA1 | Message | Date |
---|---|---|---|
![]() |
fe0e04cf66 |
platform/surface: platform_profile: Propagate error if profile registration fails
If platform_profile_register() fails, the driver does not propagate
the error, but instead probes successfully. This means when the driver
unbinds, the a warning might be issued by platform_profile_remove().
Fix this by propagating the error back to the caller of
surface_platform_profile_probe().
Compile-tested only.
Fixes:
|
|
![]() |
235985d176 |
platform/x86: asus-wmi: Map 0x2a code, Ignore 0x2b and 0x2c events
Newer Asus laptops send the following new WMI event codes when some of the F1 - F12 "media" hotkeys are pressed: 0x2a Screen Capture 0x2b PrintScreen 0x2c CapsLock Map 0x2a to KEY_SELECTIVE_SCREENSHOT mirroring how similar hotkeys are mapped on other laptops. PrintScreem and CapsLock are also reported as normal PS/2 keyboard events, map these event codes to KE_IGNORE to avoid "Unknown key code 0x%x\n" log messages. Reported-by: James John <me@donjajo.com> Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231017090725.38163-4-hdegoede@redhat.com |
|
![]() |
a5b92be248 |
platform/x86: asus-wmi: Only map brightness codes when using asus-wmi backlight control
Older Asus laptops change the backlight level themselves and then send WMI events with different codes for different backlight levels. The asus-wmi.c code maps the entire range of codes reported on brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code: define NOTIFY_BRNUP_MIN 0x11 define NOTIFY_BRNUP_MAX 0x1f define NOTIFY_BRNDOWN_MIN 0x20 define NOTIFY_BRNDOWN_MAX 0x2e if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX) code = ASUS_WMI_BRN_UP; else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX) code = ASUS_WMI_BRN_DOWN; This mapping is causing issues on new laptop models which actually send 0x2b events for printscreen presses and 0x2c events for capslock presses, which get translated into spurious brightness-down presses. This mapping is really only necessary when asus-wmi has registered a backlight-device for backlight control. In this case the mapping was used to decide to filter out the keypresss since in this case the firmware has already modified the brightness itself and instead of reporting a keypress asus-wmi will just report the new brightness value to userspace. OTOH when the firmware does not adjust the brightness itself then it seems to always report 0x2e for brightness-down presses and 0x2f for brightness up presses independent of the actual brightness level. So in this case the mapping of the code is not necessary and this translation actually leads to spurious brightness-down presses being send to userspace when pressing printscreen or capslock. Modify asus_wmi_handle_event_code() to only do the mapping when using asus-wmi backlight control to fix the spurious brightness-down presses. Reported-by: James John <me@donjajo.com> Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231017090725.38163-3-hdegoede@redhat.com |
|
![]() |
f37cc2fc27 |
platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2e
Older Asus laptops change the backlight level themselves and then send WMI events with different codes for different backlight levels. The asus-wmi.c code maps the entire range of codes reported on brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code: define NOTIFY_BRNUP_MIN 0x11 define NOTIFY_BRNUP_MAX 0x1f define NOTIFY_BRNDOWN_MIN 0x20 define NOTIFY_BRNDOWN_MAX 0x2e if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX) code = ASUS_WMI_BRN_UP; else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX) code = ASUS_WMI_BRN_DOWN; Before this commit all the NOTIFY_BRNDOWN_MIN - NOTIFY_BRNDOWN_MAX aka 0x20 - 0x2e events were mapped to 0x20. This mapping is causing issues on new laptop models which actually send 0x2b events for printscreen presses and 0x2c events for capslock presses, which get translated into spurious brightness-down presses. The plan is disable the 0x11-0x2e special mapping on laptops where asus-wmi does not register a backlight-device to avoid the spurious brightness-down keypresses. New laptops always send 0x2e for brightness-down presses, change the special internal ASUS_WMI_BRN_DOWN value from 0x20 to 0x2e to match this in preparation for fixing the spurious brightness-down presses. This change does not have any functional impact since all of 0x20 - 0x2e is mapped to ASUS_WMI_BRN_DOWN first and only then checked against the keymap code and the new 0x2e value is still in the 0x20 - 0x2e range. Reported-by: James John <me@donjajo.com> Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231017090725.38163-2-hdegoede@redhat.com |
|
![]() |
51064b7acf |
platform/x86: wmi: Update MAINTAINERS entry
Since 2011, the WMI subsystem is marked as orphaned, which means that a important part of platform support for modern notebooks and even desktops is receiving not enough maintenance. So i decided to take over the maintenance of the WMI subsystem. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231007233933.72121-2-W_Armin@gmx.de Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
|
![]() |
6284e67aa6 |
platform/x86: msi-ec: Fix the 3rd config
Fix the charge control address of CONF3 and remove an incorrect firmware
version which turned out to be a BIOS firmware and not an EC firmware.
Fixes:
|
|
![]() |
4d73c6772a |
platform/x86: intel-uncore-freq: Conditionally create attribute for read frequency
When the current uncore frequency can't be read, don't create attribute
"current_freq_khz" as any read will fail later. Some user space
applications like turbostat fail to continue with the failure. So, check
error during attribute creation.
Fixes:
|
|
![]() |
a4fdebbe06 |
Fixes in the mellanox init branch due for v6.6.
platform-drivers-x86-mellanox-init-v6.6: v6.6-rc1 + fixes in the platform-drivers-x86-mellanox-init branch to avoid a feature conflict during the v6.7 merge window. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZSAa3gAKCRBZrE9hU+XO Mbw7AQDJPBXR+D57BCwOPuVcKi85vdhD1YUYduxG3wNWCnKdwQEAryfhqIAc/M0J /O8diYEh43siyITp+K6t13EAX3V8bgU= =KJnN -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-mellanox-init-v6.6' into fixes Fixes in the mellanox init branch due for v6.6. platform-drivers-x86-mellanox-init-v6.6: v6.6-rc1 + fixes in the platform-drivers-x86-mellanox-init branch to avoid a feature conflict during the v6.7 merge window. |
|
![]() |
7ec4cd3c1a
|
platform: mellanox: Fix a resource leak in an error handling path in probing flow
Fix missed resource deallocation in rollback flows.
Currently if an error occurs after a successful
mlxplat_i2c_main_init(), mlxplat_i2c_main_exit() call is missed in
rollback flow.
Thus, some resources are not de-allocated.
Move mlxplat_pre_exit() call from mlxplat_remove() into
mlxplat_i2c_main_exit().
Call mlxplat_i2c_main_exit() instead of calling mlxplat_pre_exit() in
mlxplat_probe() error handling flow.
Unregister 'priv->pdev_i2c' device in mlxplat_i2c_main_init() cleanup
flow if this device was successfully registered.
Fixes:
|
|
![]() |
5b44abbc39 |
platform/x86: hp-wmi:: Mark driver struct with __refdata to prevent section mismatch warning
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning:
WARNING: modpost: drivers/platform/x86/hp/hp-wmi: section mismatch in reference: hp_wmi_driver+0x8 (section: .data) -> hp_wmi_bios_remove (section: .exit.text)
Fixes:
|
|
![]() |
aa7dcba3ba |
platform/x86: touchscreen_dmi: Add info for the Positivo C4128B
Add information for the Positivo C4128B, a notebook/tablet convertible. Link: https://github.com/onitake/gsl-firmware/pull/217 Signed-off-by: Renan Guilherme Lebre Ramos <japareaggae@gmail.com> Link: https://lore.kernel.org/r/20231004235900.426240-1-japareaggae@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
|
![]() |
34c271e778 |
platform/x86: touchscreen_dmi: Add info for the BUSH Bush Windows tablet
Add touchscreen info for the BUSH Bush Windows tablet. It was tested using gslx680_ts_acpi module and on patched kernel installed on device. Link: https://github.com/onitake/gsl-firmware/pull/215 Link: https://github.com/systemd/systemd/pull/29268 Signed-off-by: Tomasz Swiatek <swiatektomasz99@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
|
![]() |
cbf9256410 |
platform/mellanox: tmfifo: fix kernel-doc warnings
Fix kernel-doc notation for structs and struct members to prevent these warnings: mlxbf-tmfifo.c:73: warning: cannot understand function prototype: 'struct mlxbf_tmfifo_vring ' mlxbf-tmfifo.c:128: warning: cannot understand function prototype: 'struct mlxbf_tmfifo_vdev ' mlxbf-tmfifo.c:146: warning: cannot understand function prototype: 'struct mlxbf_tmfifo_irq_info ' mlxbf-tmfifo.c:158: warning: cannot understand function prototype: 'struct mlxbf_tmfifo_io ' mlxbf-tmfifo.c:182: warning: cannot understand function prototype: 'struct mlxbf_tmfifo ' mlxbf-tmfifo.c:208: warning: cannot understand function prototype: 'struct mlxbf_tmfifo_msg_hdr ' mlxbf-tmfifo.c:138: warning: Function parameter or member 'config' not described in 'mlxbf_tmfifo_vdev' mlxbf-tmfifo.c:212: warning: Function parameter or member 'unused' not described in 'mlxbf_tmfifo_msg_hdr' Fixes: |
|
![]() |
2545deba31 |
platform/x86/intel/ifs: release cpus_read_lock()
Couple of error paths in do_core_test() was returning directly without
doing a necessary cpus_read_unlock().
Following lockdep warning was observed when exercising these scenarios
with PROVE_RAW_LOCK_NESTING enabled:
[ 139.304775] ================================================
[ 139.311185] WARNING: lock held when returning to user space!
[ 139.317593] 6.6.0-rc2ifs01+ #11 Tainted: G S W I
[ 139.324499] ------------------------------------------------
[ 139.330908] bash/11476 is leaving the kernel with locks still held!
[ 139.338000] 1 lock held by bash/11476:
[ 139.342262] #0: ffffffffaa26c930 (cpu_hotplug_lock){++++}-{0:0}, at:
do_core_test+0x35/0x1c0 [intel_ifs]
Fix the flow so that all scenarios release the lock prior to returning
from the function.
Fixes:
|
|
![]() |
981368e144 |
platform/x86: hp-bioscfg: Fix reference leak
If a duplicate attribute is found using kset_find_obj(), a reference to that attribute is returned which needs to be disposed accordingly using kobject_put(). Use kobject_put() to dispose the duplicate attribute in such a case. As a side note, a very similar bug was fixed in commit |
|
![]() |
528ab3e605 |
platform/x86: think-lmi: Fix reference leak
If a duplicate attribute is found using kset_find_obj(), a reference to that attribute is returned which needs to be disposed accordingly using kobject_put(). Move the setting name validation into a separate function to allow for this change without having to duplicate the cleanup code for this setting. As a side note, a very similar bug was fixed in commit |
|
![]() |
bc3b6f5946 |
MAINTAINERS: Add x86 platform drivers patchwork
Add x86 platform drivers patchwork which has been missing from MAINTAINERS. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230919123948.1583-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
|
![]() |
069b292b4b |
MAINTAINERS: Add myself into x86 platform driver maintainers
Hans has been asking for another person to help as the maintainer of the x86 platform driver because Mark has not been able to find time to do that. I got asked for the task and have been reviewing the relevant patches for a while now but lets make it more official by adding the MAINTAINERS entries. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230918102901.17669-2-ilpo.jarvinen@linux.intel.com Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
|
![]() |
81bf4a4e9c |
platform/x86: thinkpad_acpi: Take mutex in hotkey_resume
hotkey_status_set expects the hotkey_mutex to be held.
It seems like it was missed here and that gives lockdep
warnings while resuming.
Fixes:
|
|
![]() |
85e654c9f7 |
platform/x86: intel_scu_ipc: Fail IPC send if still busy
It's possible for interrupts to get significantly delayed to the point
that callers of intel_scu_ipc_dev_command() and friends can call the
function once, hit a timeout, and call it again while the interrupt
still hasn't been processed. This driver will get seriously confused if
the interrupt is finally processed after the second IPC has been sent
with ipc_command(). It won't know which IPC has been completed. This
could be quite disastrous if calling code assumes something has happened
upon return from intel_scu_ipc_dev_simple_command() when it actually
hasn't.
Let's avoid this scenario by simply returning -EBUSY in this case.
Hopefully higher layers will know to back off or fail gracefully when
this happens. It's all highly unlikely anyway, but it's better to be
correct here as we have no way to know which IPC the status register is
telling us about if we send a second IPC while the previous IPC is still
processing.
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes:
|
|
![]() |
efce78584e |
platform/x86: intel_scu_ipc: Don't override scu in intel_scu_ipc_dev_simple_command()
Andy discovered this bug during patch review. The 'scu' argument to this function shouldn't be overridden by the function itself. It doesn't make any sense. Looking at the commit history, we see that commit |
|
![]() |
427fada620 |
platform/x86: intel_scu_ipc: Check status upon timeout in ipc_wait_for_interrupt()
It's possible for the completion in ipc_wait_for_interrupt() to timeout,
simply because the interrupt was delayed in being processed. A timeout
in itself is not an error. This driver should check the status register
upon a timeout to ensure that scheduling or interrupt processing delays
don't affect the outcome of the IPC return value.
CPU0 SCU
---- ---
ipc_wait_for_interrupt()
wait_for_completion_timeout(&scu->cmd_complete)
[TIMEOUT] status[IPC_STATUS_BUSY]=0
Fix this problem by reading the status bit in all cases, regardless of
the timeout. If the completion times out, we'll assume the problem was
that the IPC_STATUS_BUSY bit was still set, but if the status bit is
cleared in the meantime we know that we hit some scheduling delay and we
should just check the error bit.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes:
|
|
![]() |
e0b4ab3bb9 |
platform/x86: intel_scu_ipc: Check status after timeout in busy_loop()
It's possible for the polling loop in busy_loop() to get scheduled away
for a long time.
status = ipc_read_status(scu); // status = IPC_STATUS_BUSY
<long time scheduled away>
if (!(status & IPC_STATUS_BUSY))
If this happens, then the status bit could change while the task is
scheduled away and this function would never read the status again after
timing out. Instead, the function will return -ETIMEDOUT when it's
possible that scheduling didn't work out and the status bit was cleared.
Bit polling code should always check the bit being polled one more time
after the timeout in case this happens.
Fix this by reading the status once more after the while loop breaks.
The readl_poll_timeout() macro implements all of this, and it is
shorter, so use that macro here to consolidate code and fix this.
There were some concerns with using readl_poll_timeout() because it uses
timekeeping, and timekeeping isn't running early on or during the late
stages of system suspend or early stages of system resume, but an audit
of the code concluded that this code isn't called during those times so
it is safe to use the macro.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Fixes:
|
|
![]() |
4106a70dda |
platform/x86: asus-wmi: Support 2023 ROG X16 tablet mode
Add quirk for ASUS ROG X16 (GV601V, 2023 versions) Flow 2-in-1 to enable tablet mode with lid flip (all screen rotations). Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230905082813.13470-1-luke@ljones.dev Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
|
![]() |
0a138f1670 |
platform/mellanox: NVSW_SN2201 should depend on ACPI
The only probing method supported by the Nvidia SN2201 platform driver
is probing through an ACPI match table. Hence add a dependency on
ACPI, to prevent asking the user about this driver when configuring a
kernel without ACPI support.
Fixes:
|
|
![]() |
c2dffda1d8 |
platform/mellanox: mlxbf-bootctl: add NET dependency into Kconfig
The latest version of the mlxbf_bootctl driver utilizes "sysfs_format_mac", and this API is only available if NET is defined in the kernel configuration. This patch changes the mlxbf_bootctl Kconfig to depend on NET. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/ Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
|
![]() |
0f5969452e |
platform/mellanox: mlxbf-pmc: Fix reading of unprogrammed events
This fix involves 2 changes:
- All event regs have a reset value of 0, which is not a valid
event_number as per the event_list for most blocks and hence seen
as an error. Add a "disable" event with event_number 0 for all blocks.
- The enable bit for each counter need not be checked before
reading the event info, and hence removed.
Fixes:
|
|
![]() |
80ccd40568 |
platform/mellanox: mlxbf-pmc: Fix potential buffer overflows
Replace sprintf with sysfs_emit where possible.
Size check in mlxbf_pmc_event_list_show should account for "\0".
Fixes:
|
|
![]() |
fc4c655821 |
platform/mellanox: mlxbf-tmfifo: Drop jumbo frames
This commit drops over-sized network packets to avoid tmfifo
queue stuck.
Fixes:
|
|
![]() |
78034cbece |
platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors
This commit fixes tmfifo console stuck issue when the virtual
networking interface is in down state. In such case, the network
Rx descriptors runs out and causes the Rx network packet staying
in the head of the tmfifo thus blocking the console packets. The
fix is to drop the Rx network packet when no more Rx descriptors.
Function name mlxbf_tmfifo_release_pending_pkt() is also renamed
to mlxbf_tmfifo_release_pkt() to be more approperiate.
Fixes:
|
|
![]() |
0bb80ecc33 | Linux 6.6-rc1 | |
![]() |
1548b060d6 |
drm ci for 6.6-rc1
Add CI integration support files for drm subsystem to gitlab.freedesktop.org instance. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmTv5XMACgkQDHTzWXnE hr6xGg/+N2Eb3QN7nbhAtpL80Xy1mR4fSYz/ZC8yad+942Nmn9T35PgnrABj0a6+ drQJMqOay1dooe/KRKpLJGYIxCklQUpRn35jiW9KqYkUTwBS77wrGlMySKfzv6eL yl9Pl69xfQHm/cmigDWe0JavvpDrRnmxBuGrHSjVPHltWVcTDRTyMYpnh6xzZ8JQ zUpSLhDqkpNJ11072UxTkALwGMIanGOJAYHOoRkJi65BhRcK5QfzslXzpibf484t FlEh2I5XPS+GBYn84GIvujzn3Bic7Dz9By2z6qIeTX93W5csYnLmKqI0ErAvlGIz 9h6ELeVTnDc/OZa8FmPe4GIc08dKf5cpuEI5szJW30eRVtxI6zygOszHKJArrXkl JDRuuRXd/SegQvV8NeGaetjh+t53U8utXxPqS6gD50zb5TzYs2nkxOgNGnXjAUjY DtwvQDsIsL5tFWwaRd7p+Ph23v2F9T486RpCcFkZFPMSbxO8k2lkEyzKBFPruhgl aYiRtcCnNPajzjOU+Hhgw2ayfR3GN3FDcURLdrKFYnwVZynxpaZDPcMyVzOvYFOr aH4TfJcwsm/CFhm8Pq5GVgwWJsLPteZEHTq7pRzcjwbt2zs+bzbaCn3twVyxg5a2 R1vNtNI+UuvbEC6srBM/CTa2KpUtmg5dHWppdoboex7XhlF6j1g= =X1RZ -----END PGP SIGNATURE----- Merge tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm Pull drm ci scripts from Dave Airlie: "This is a bunch of ci integration for the freedesktop gitlab instance where we currently do upstream userspace testing on diverse sets of GPU hardware. From my perspective I think it's an experiment worth going with and seeing how the benefits/noise playout keeping these files useful. Ideally I'd like to get this so we can do pre-merge testing on PRs eventually. Below is some info from danvet on why we've ended up making the decision and how we can roll it back if we decide it was a bad plan. Why in upstream? - like documentation, testcases, tools CI integration is one of these things where you can waste endless amounts of time if you accidentally have a version that doesn't match your source code - but also like the above, there's a balance, this is the initial cut of what we think makes sense to keep in sync vs out-of-tree, probably needs adjustment - gitlab supports out-of-repo gitlab integration and that's what's been used for the kernel in drm, but it results in per-driver fragmentation and lots of duplicated effort. the simple act of smashing an arbitrary winner into a topic branch already started surfacing patches on dri-devel and sparking good cross driver team discussions Why gitlab? - it's not any more shit than any of the other CI - drm userspace uses it extensively for everything in userspace, we have a lot of people and experience with this, including integration of hw testing labs - media userspace like gstreamer is also on gitlab.fd.o, and there's discussion to extend this to the media subsystem in some fashion Can this be shared? - there's definitely a pile of code that could move to scripts/ if other subsystem adopt ci integration in upstream kernel git. other bits are more drm/gpu specific like the igt-gpu-tests/tools integration - docker images can be run locally or in other CI runners Will we regret this? - it's all in one directory, intentionally, for easy deletion - probably 1-2 years in upstream to see whether this is worth it or a Big Mistake. that's roughly what it took to _really_ roll out solid CI in the bigger userspace projects we have on gitlab.fd.o like mesa3d" * tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm: drm: ci: docs: fix build warning - add missing escape drm: Add initial ci/ subdirectory |
|
![]() |
e56b2b6057 |
Fix preemption delays in the SGX code, remove unnecessarily UAPI-exported code,
fix a ld.lld linker (in)compatibility quirk and make the x86 SMP init code a bit more conservative to fix kexec() lockups. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmT97boRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jObA//X7nug+d+IMLIs+c4579z4ZhkltMRxJVI Btf8sdHpwgTUtKaOLmJnGiJ7f0GK5NtoaNtGUJF28aQETVOhco0Fvg/R8k1FE2Tc CJqw6oy2FjVqD9qzZPCXh6QCvTtGjN5GF+xmoUbf7eZ9U8IVvOxBG+7yDMorQw3P zzjIccLLg/aDvNLN/yZD2oqw6UGHZuh/Qr/0Q4PkZ7zL+yWV8EC+HOx3rlQklq0x hh6YMwa4LGr3przUObHsfNS11EDzLDhg2WtTQMr12vlnpUB2eXnXWLklr6rpWjcz qJiMxkrEkygB7seXnuQ0b4KHN/17zdkJ+t6vZoznUTXs1ohIDLWdiNTSl03qCs9B V98a1x3MPT6aro9O/5ywyAJwPb0hvsg2S0ODFWab0Z3oRUbIG/k6dTEYlP7qZw8v EFMtLy6M2EILXetj8q2ZGcA0rKz7pj/z9SosWDzqNj76w7xGwDKrSWoKJckkCwG+ j+ycBuKfrpxVYOF4ywvONSf35QTIW8BR0sM9Lg1GZuwaeincFwLf0cmS4ljGRyZ1 Vsi0SfpIgVQkeY/17onTa1C5X6c2wIE9nq253M58Xnc9B2EWpYImr+4PVZk6s4GI GExvdPC/rIIwYa0LmvYTTlpHEd7f5qIAhfcEtMAuGSjVDLvmdDGFkaU7TgJ6Jcw2 D12wKSAAgPU= =S38E -----END PGP SIGNATURE----- Merge tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fix preemption delays in the SGX code, remove unnecessarily UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and make the x86 SMP init code a bit more conservative to fix kexec() lockups" * tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Break up long non-preemptible delays in sgx_vepc_release() x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld x86/smp: Don't send INIT to non-present and non-booted CPUs |
|
![]() |
e79dbf03d8 |
Work around a firmware bug in the uncore PMU driver,
affecting certain Intel systems. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmT97GIRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1iLjRAAjk67cOUubVYXYOwlI4/5c+XiMC1qcqv9 M0uK30h+EECqWdm5Waj4mjFJ3seWUPrNsmdY9L4a6Gd1+s6W10wIabCEJnDBcfj5 M4Nv7OBnbfKb2JGfUfgd0OSSoclxL/QJh5UXMI+vLPKS2hMC5wL3BdKsxwrmbT+y ZwilRbkHU0kSZpkkKE9yZNOcHhBMZ6LuQGlCAQ5k99Q8Z2KbxPa8T/8zx/RjYfuw 5WrE2gJJPXE/J/IHIvg7auhu2IcpzOmWPtb9J8MPExrUZLSQIYNhdqqyY9lvagKu OdYcotBEoZM2+MSXzVWSQPKVVKox03FDErwdGef/QLFmzzldFFGUjKSRBfpnMK9Q esjSiIGXlxh8fFcyCS/6FH48zA5y4BnBSzmPn3xt63VK0+EHPtUOUt8Xiug8DEYs O8hW+3SYmhr6seF9ioX0RCoqft8dQuNz07zZWfLu5Qc0Bl8aLBhwRoXsYKnKqems uqQ7bOb1FFwrS6AgebDhqHJUiw6WaeldsEolDyZzbKGJqFHJuTTFaECHApceLD7M V4ymgy6QoKeccctr8qnwzX/5xbwTx8fRfTIuL9ZR2KC0NJLF/UwIw+bEAq2vuv3A ROFYH+z1h4IvlCE3o3mRhGGYTxkdFw+BRXrWP690qxyRHBoHE+JwccSu36CKwBYS LiZn7CWuFtg= =Zq1S -----END PGP SIGNATURE----- Merge tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event fix from Ingo Molnar: "Work around a firmware bug in the uncore PMU driver, affecting certain Intel systems" * tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Correct the number of CHAs on EMR |
|
![]() |
535a265d7f |
perf tools changes for v6.6:
perf tools maintainership: - Add git information for perf-tools and perf-tools-next trees/branches to the MAINTAINERS file. That is where development now takes place and myself and Namhyung Kim have write access, more people to come as we emulate other maintainer groups. perf record: - Record kernel data maps when 'perf record --data' is used, so that global variables can be resolved and used in tools that do data profiling. perf trace: - Remove the old, experimental support for BPF events in which a .c file was passed as an event: "perf trace -e hello.c" to then get compiled and loaded. The only known usage for that, that shipped with the kernel as an example for such events, augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all the user space components and the BPF code connected to the syscalls. In the end just the way to glue the BPF part and the user space type beautifiers changed, now being performed by libbpf skeletons. The next step is to use BTF to do pretty printing of all syscall types, as discussed with Alan Maguire and others. Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings, some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds: # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5 0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 ? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0 10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ... ? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 ? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0 3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ... 3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0 Performance counter stats for 'sleep 5': 2,617,347 cycles 1,855,997 instructions # 0.71 insn per cycle 5.002282128 seconds time elapsed 0.000855000 seconds user 0.000852000 seconds sys # perf annotate: - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for licensing reasons, and we missed a build test on tools/perf/tests makefile. Since we now default to NDEBUG=1, we ended up segfaulting when building with BUILD_NONDISTRO=1 because a needed initialization routine was being "error checked" via an assert. Fix it by explicitly checking the result and aborting instead if it fails. We better back propagate the error, but at least 'perf annotate' on samples collected for a BPF program is back working when perf is built with BUILD_NONDISTRO=1. perf report/top: - Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'. - Fix the number of entries for 'e' key in the TUI that was preventing navigation of lines when expanding an entry. perf report/script: - Support cross platform register handling, allowing a perf.data file collected on one architecture to have registers sampled correctly displayed when analysis tools such as 'perf report' and 'perf script' are used on a different architecture. - Fix handling of event attributes in pipe mode, i.e. when one uses: perf record -o - | perf report -i - When no perf.data files are used. - Handle files generated via pipe mode with a version of perf and then read also via pipe mode with a different version of perf, where the event attr record may have changed, use the record size field to properly support this version mismatch. perf probe: - Accessing global variables from uprobes isn't supported, make the error message state that instead of stating that some minimal kernel version is needed to have that feature. This seems just a tool limitation, the kernel probably has all that is needed. perf tests: - Fix a reference count related leak in the dlfilter v0 API where the result of a thread__find_symbol_fb() is not matched with an addr_location__exit() to drop the reference counts of the resolved components (machine, thread, map, symbol, etc). Add a dlfilter test to make sure that doesn't regresses. - Lots of fixes for the 'perf test' written in shell script related to problems found with the shellcheck utility. - Fixes for 'perf test' shell scripts testing features enabled when perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters. - Add perf record sample filtering test, things like the following example, that gets implemented as a BPF filter attached to the event: # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000' - Improve the way the task_analyzer test checks if libtraceevent is linked, using 'perf version --build-options' instead of the more expensinve 'perf record -e "sched:sched_switch"'. - Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents). libperf: - Implement riscv mmap support (This went as well via the RiscV tree, same contents). perf script: - New tool that converts perf.data files to the firefox profiler format so that one can use the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's Google Summer of Code. One can generate the output and upload it to the web interface but Anup also automated everything: perf script gecko -F 99 -a sleep 60 - Support syscall name parsing on arm64. - Print "cgroup" field on the same line as "comm". perf bench: - Add new 'uprobe' benchmark to measure the overhead of uprobes with/without BPF programs attached to it. - breakpoints are not available on power9, skip that test. perf stat: - Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra 'perf test' check that exemplifies its purpose: TEST_ASSERT_VAL("#num_cpus_online", expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0); TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0); TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online); Miscellaneous: - Improve tool startup time by lazily reading PMU, JSON, sysfs data. - Improve error reporting in the parsing of events, passing YYLTYPE to error routines, so that the output can show were the parsing error was found. - Add 'perf test' entries to check the parsing of events improvements. - Fix various leak for things detected by -fsanitize=address, mostly things that would be freed at tool exit, including: - Free evsel->filter on the destructor. - Allow tools to register a thread->priv destructor and use it in 'perf trace'. - Free evsel->priv in 'perf trace'. - Free string returned by synthesize_perf_probe_point() when the caller fails to do all it needs. - Adjust various compiler options to not consider errors some warnings when building with broken headers found in things like python, flex, bison, as we otherwise build with -Werror. Some for gcc, some for clang, some for some specific version of those, some for some specific version of flex or bison, or some specific combination of these components, bah. - Allow customization of clang options for BPF target, this helps building on gentoo where there are other oddities where BPF targets gets passed some compiler options intended for the native build, so building with WERROR=0 helps while these oddities are fixed. - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock', fixing some segfaults when handling some odd failures. - Add LTO build option. - Fix format of unordered lists in the perf docs (tools/perf/Documentation). - Overhaul the bison files, using constructs such as YYNOMEM. - Remove unused tokens from the bison .y files. - Add more comments to various structs. - A few LoongArch enablement patches. Vendor events (JSON): - Add JSON metrics for Yitian 710 DDR (aarch64). Things like: EventName, BriefDescription visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.", visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.", op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.", op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.", op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.", - Add AmpereOne metrics (aarch64). - Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo. - Update scale units and descriptions of common topdown metrics on aarch64. Things like: - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)", - "BriefDescription": "Frontend bound L1 topdown metric", + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))", + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.", - Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints. - Update files for the power10 platform. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZPfJZgAKCRCyPKLppCJ+ J1/eAP9lgtavD0V75wy1p5zyotkceOmPTkk1DYFVx2Euhxa/lAD/YW/JvuVSo0Gr HqJP52XaV0tF8gG+YxL+Lay/Ke0P5AQ= =d12c -----END PGP SIGNATURE----- Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Arnaldo Carvalho de Melo: "perf tools maintainership: - Add git information for perf-tools and perf-tools-next trees and branches to the MAINTAINERS file. That is where development now takes place and myself and Namhyung Kim have write access, more people to come as we emulate other maintainer groups. perf record: - Record kernel data maps when 'perf record --data' is used, so that global variables can be resolved and used in tools that do data profiling. perf trace: - Remove the old, experimental support for BPF events in which a .c file was passed as an event: "perf trace -e hello.c" to then get compiled and loaded. The only known usage for that, that shipped with the kernel as an example for such events, augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all the user space components and the BPF code connected to the syscalls. In the end just the way to glue the BPF part and the user space type beautifiers changed, now being performed by libbpf skeletons. The next step is to use BTF to do pretty printing of all syscall types, as discussed with Alan Maguire and others. Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings, some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds: # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5 0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 ? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0 10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ... ? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 ? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0 3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ... 3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0 Performance counter stats for 'sleep 5': 2,617,347 cycles 1,855,997 instructions # 0.71 insn per cycle 5.002282128 seconds time elapsed 0.000855000 seconds user 0.000852000 seconds sys perf annotate: - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for licensing reasons, and we missed a build test on tools/perf/tests makefile. Since we now default to NDEBUG=1, we ended up segfaulting when building with BUILD_NONDISTRO=1 because a needed initialization routine was being "error checked" via an assert. Fix it by explicitly checking the result and aborting instead if it fails. We better back propagate the error, but at least 'perf annotate' on samples collected for a BPF program is back working when perf is built with BUILD_NONDISTRO=1. perf report/top: - Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'. - Fix the number of entries for 'e' key in the TUI that was preventing navigation of lines when expanding an entry. perf report/script: - Support cross platform register handling, allowing a perf.data file collected on one architecture to have registers sampled correctly displayed when analysis tools such as 'perf report' and 'perf script' are used on a different architecture. - Fix handling of event attributes in pipe mode, i.e. when one uses: perf record -o - | perf report -i - When no perf.data files are used. - Handle files generated via pipe mode with a version of perf and then read also via pipe mode with a different version of perf, where the event attr record may have changed, use the record size field to properly support this version mismatch. perf probe: - Accessing global variables from uprobes isn't supported, make the error message state that instead of stating that some minimal kernel version is needed to have that feature. This seems just a tool limitation, the kernel probably has all that is needed. perf tests: - Fix a reference count related leak in the dlfilter v0 API where the result of a thread__find_symbol_fb() is not matched with an addr_location__exit() to drop the reference counts of the resolved components (machine, thread, map, symbol, etc). Add a dlfilter test to make sure that doesn't regresses. - Lots of fixes for the 'perf test' written in shell script related to problems found with the shellcheck utility. - Fixes for 'perf test' shell scripts testing features enabled when perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters. - Add perf record sample filtering test, things like the following example, that gets implemented as a BPF filter attached to the event: # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000' - Improve the way the task_analyzer test checks if libtraceevent is linked, using 'perf version --build-options' instead of the more expensinve 'perf record -e "sched:sched_switch"'. - Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents). libperf: - Implement riscv mmap support (This went as well via the RiscV tree, same contents). perf script: - New tool that converts perf.data files to the firefox profiler format so that one can use the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's Google Summer of Code. One can generate the output and upload it to the web interface but Anup also automated everything: perf script gecko -F 99 -a sleep 60 - Support syscall name parsing on arm64. - Print "cgroup" field on the same line as "comm". perf bench: - Add new 'uprobe' benchmark to measure the overhead of uprobes with/without BPF programs attached to it. - breakpoints are not available on power9, skip that test. perf stat: - Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra 'perf test' check that exemplifies its purpose: TEST_ASSERT_VAL("#num_cpus_online", expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0); TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0); TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online); Miscellaneous: - Improve tool startup time by lazily reading PMU, JSON, sysfs data. - Improve error reporting in the parsing of events, passing YYLTYPE to error routines, so that the output can show were the parsing error was found. - Add 'perf test' entries to check the parsing of events improvements. - Fix various leak for things detected by -fsanitize=address, mostly things that would be freed at tool exit, including: - Free evsel->filter on the destructor. - Allow tools to register a thread->priv destructor and use it in 'perf trace'. - Free evsel->priv in 'perf trace'. - Free string returned by synthesize_perf_probe_point() when the caller fails to do all it needs. - Adjust various compiler options to not consider errors some warnings when building with broken headers found in things like python, flex, bison, as we otherwise build with -Werror. Some for gcc, some for clang, some for some specific version of those, some for some specific version of flex or bison, or some specific combination of these components, bah. - Allow customization of clang options for BPF target, this helps building on gentoo where there are other oddities where BPF targets gets passed some compiler options intended for the native build, so building with WERROR=0 helps while these oddities are fixed. - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock', fixing some segfaults when handling some odd failures. - Add LTO build option. - Fix format of unordered lists in the perf docs (tools/perf/Documentation) - Overhaul the bison files, using constructs such as YYNOMEM. - Remove unused tokens from the bison .y files. - Add more comments to various structs. - A few LoongArch enablement patches. Vendor events (JSON): - Add JSON metrics for Yitian 710 DDR (aarch64). Things like: EventName, BriefDescription visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.", visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.", op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.", op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.", op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.", - Add AmpereOne metrics (aarch64). - Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo. - Update scale units and descriptions of common topdown metrics on aarch64. Things like: - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)", - "BriefDescription": "Frontend bound L1 topdown metric", + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))", + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.", - Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints. - Update files for the power10 platform" * tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits) perf parse-events: Fix driver config term perf parse-events: Fixes relating to no_value terms perf parse-events: Fix propagation of term's no_value when cloning perf parse-events: Name the two term enums perf list: Don't print Unit for "default_core" perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake perf dlfilter: Avoid leak in v0 API test use of resolve_address() perf metric: Add #num_cpus_online literal perf pmu: Remove str from perf_pmu_alias perf parse-events: Make common term list to strbuf helper perf parse-events: Minor help message improvements perf pmu: Avoid uninitialized use of alias->str perf jevents: Use "default_core" for events with no Unit perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test perf test shell stat_bpf_counters: Fix test on Intel perf test shell record_bpf_filter: Skip 6.2 kernel libperf: Get rid of attr.id field perf tools: Convert to perf_record_header_attr_id() libperf: Add perf_record_header_attr_id() perf tools: Handle old data in PERF_RECORD_ATTR ... |
|
![]() |
fd3a5940e6 |
six smb3 client fixes, one fix for nls Kconfig, one minor spnego registry update
-----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmT8qQwACgkQiiy9cAdy T1Hjzgv/dCmqowHN9fI1gP/SpkbyZt0/GrlhpRMELQ2THAYuJmWQ9i/vR7VFMMv7 C7vfx3nYTQfQAcsshA+bfOkABr02A9HD5HuBEhWldEFQD/qIPrPMyU53DJ6m4QOb 81/8ox6XJMDNHWJUPJVfhAyHoKBxYyNcqqkITnBcSpqENbm7IZ8UhUJe1l75nkBi IYR28e4Aci5uGPuMB7NAuKmJM0IKi1ipMy4MCXkSD/vQZStz76mhzx200Wm6ObuX jqPzIb32simsVY7q/Hbkxt2MPDUbsn6kBhOSe8oJVxEgrMy56pZCOByPjc0ZFzE6 SziZ0JanrfjlGdBg5qjmcUamEMV44Oi1QQ6PpkHRA2zDyXMpv8ulwy/3Z40O7zbb WBBar0HsJE5osCL0jiwLbNorctEnmtSKWcyXOI924Bli4eesE/ojq2u4H4KrlXzA gDqPwAhhw/PrbuEmgRy9maYE8KwutZh2HCRvxgFB1NgbcNLvKgkQrly4QP29hKQy +HViqKAe =6QhY -----END PGP SIGNATURE----- Merge tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6 Pull smb client fixes from Steve French: - six smb3 client fixes including ones to allow controlling smb3 directory caching timeout and limits, and one debugging improvement - one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option) - one minor spnego registry update * tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: spnego: add missing OID to oid registry smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU cifs: update internal module version number for cifs.ko smb3: allow controlling maximum number of cached directories smb3: add trace point for queryfs (statfs) nls: Hide new NLS_UCS2_UTILS smb3: allow controlling length of time directory entries are cached with dir leases smb: propagate error code of extract_sharename() |
|
![]() |
a3c57ab79a |
iov_iter: Kunit tests for page extraction
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with as they require userspace VM interaction. ITER_DISCARD isn't dealt with either as that can't be extracted. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <brauner@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
![]() |
2d71340ff1 |
iov_iter: Kunit tests for copying to/from an iterator
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with as they require userspace VM interaction. ITER_DISCARD isn't dealt with either as that does nothing. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <brauner@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
![]() |
f741bd7178 |
iov_iter: Fix iov_iter_extract_pages() with zero-sized entries
iov_iter_extract_pages() doesn't correctly handle skipping over initial
zero-length entries in ITER_KVEC and ITER_BVEC-type iterators.
The problem is that it accidentally reduces maxsize to 0 when it
skipping and thus runs to the end of the array and returns 0.
Fix this by sticking the calculated size-to-copy in a new variable
rather than back in maxsize.
Fixes:
|
|
![]() |
6b8bb5b8d9 |
sh updates for v6.6
- sh: push-switch: Reorder cleanup operations to avoid use-after-free bug - sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory() -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEYv+KdYTgKVaVRgAGdCY7N/W1+RMFAmT8zzIACgkQdCY7N/W1 +RNmHhAAxp8Hme2NiDlhoZkYj7I2WOzKcHmAxD2Ss+pLWwwoo9g1DgD/7aOuQu2m lkeI3+b1xaRQY1quSVvEzbuIzeKvBnzBT1utceITaH9AKJ8ffha4OHgO4LMBCH3A UGWPK/Yp+KuAPjFvmvY6jZvEluLWQWLAFc0Gxs8thxR09TjEhAhMCvK+YAYe6GVe uFhFklBNkCbcR/TelhFXPscrTUfQQtM1VjLNuj6Uh1G5gMDBPSiCJVGobnAtJOdq cVZG8oUAT6UUl6d6hDSucv0APS5bpWYJBfXBlwopOokA+uKZOAT75mf3WwOLperT l2HQzvFamP3p1thqrUyqsLq6i0DtP0Aaa+M5lHqM6yX+H0mEmBD6JXhCL/Ka7g2/ ezA5LZTmfOlcXb4zAmORZA7jp8/KH7q1bfGARV79jHOZ+unUQ4aHufo7+hw+WMO3 nwELWLBGuCn/Gd8bNTHSPHCY2hiWep4eFSqpevI+JQGJ8/Jvpo7WdllZ1BqZ9bpB yhABvKt+bBLfXElG7kH1ctBVaAubWai7bBvF/ASIC08dceP2SbYojj/msZOz0SsM gGUMrXM7jZ/jEsWuDd5uOFs+QupA1HhDtcF1KRFx6o4//EDOn2g/0rB+GVaSCcI0 mddhtvRWjYRO9po8IAnprH+qU67ZWy5ouZ6U0/i2FL8E/rNoHfk= =sNwf -----END PGP SIGNATURE----- Merge tag 'sh-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from Adrian Glaubitz: - Fix a use-after-free bug in the push-switch driver (Duoming Zhou) - Fix calls to dma_declare_coherent_memory() that incorrectly passed the buffer end address instead of the buffer size as the size parameter * tag 'sh-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: push-switch: Reorder cleanup operations to avoid use-after-free bug sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory() |
|
![]() |
1b37a0a2d4 |
RISC-V Patches for the 6.6 Merge Window, Part 2 (try 2)
* The kernel now dynamically probes for misaligned access speed, as opposed to relying on a table of known implementations. * Support for non-coherent devices on systems using the Andes AX45MP core, including the RZ/Five SoCs. * Support for the V extension in ptrace(), again. * Support for KASLR. * Support for the BPF prog pack allocator in RISC-V. * A handful of bug fixes and cleanups. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmT8eV0THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiQYTD/9V6asKMDdWUV+gti/gRvJsiYUjIrrK h4MB8hL3fHfCLBpTD4rU6K1Gx6hzPjGsxIuQyAq/hf752KB/9XUiIVziRBv2ZEBb GuTFCXfg0QXBUlxBZzFw5SKUuKXgRaMAQ14qjy3tfLk31YMQmBtAlEPdDM8mZOCQ zNI3bbdn6zASeaSMh7hwBoOJWP2ACoOEW7RcD44EDT8jb3YW5rEF86x0XtYLgJb6 xhaR4ieIdaOLxz2RbjXj0GcPIBfhTxZbwN3fLlD8PxuGqCKn5kN03bPPwP9tMTAc z02EgVcSDvJWpYikuuTkPMxpSi18OZPJ6eriwOv5ccP5NXQScO09iGo7IZEM7OzO j1IrIXyncU4BhxlpWombU454Va+ezUlfh9uh+MrJ+Bnve3T3S9ax7AV4S8vkJZlT bnmJVS/g7L/7nxTQdJ3zoAo2WzFQXL0C8SR5tGo/3aRk0uYoliHy/W419f55F9GZ rFcc+LMqai8N4bLN3whaK0NnuodNWHoNlpcd/5ncJwecswuDkah3LWcd4rwBrWhu 8RIkIfpdr/vTQjUVXVLeMHdKB+lST3iF1feMqJj0PfTyvTZi5yfSppjAfkAdVq+9 lHqAjsaGdiCrOtLxb0oBR2PTDQPAm2gN2meuSMommDQR6Vul8K5WcQml9Zx9QEWA eDXWYDZISKYJbA== =s89m -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - The kernel now dynamically probes for misaligned access speed, as opposed to relying on a table of known implementations. - Support for non-coherent devices on systems using the Andes AX45MP core, including the RZ/Five SoCs. - Support for the V extension in ptrace(), again. - Support for KASLR. - Support for the BPF prog pack allocator in RISC-V. - A handful of bug fixes and cleanups. * tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits) soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled bpf, riscv: use prog pack allocator in the BPF JIT riscv: implement a memset like function for text riscv: extend patch_text_nosync() for multiple pages bpf: make bpf_prog_pack allocator portable riscv: libstub: Implement KASLR by using generic functions libstub: Fix compilation warning for rv32 arm64: libstub: Move KASLR handling functions to kaslr.c riscv: Dump out kernel offset information on panic riscv: Introduce virtual kernel mapping KASLR RISC-V: Add ptrace support for vectors soc: renesas: Kconfig: Select the required configs for RZ/Five SoC cache: Add L2 cache management for Andes AX45MP RISC-V core dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller riscv: mm: dma-noncoherent: nonstandard cache operations support riscv: errata: Add Andes alternative ports riscv: asm: vendorid_list: Add Andes Technology to the vendors list ... |
|
![]() |
246f80a0b1 |
sh: push-switch: Reorder cleanup operations to avoid use-after-free bug
The original code puts flush_work() before timer_shutdown_sync()
in switch_drv_remove(). Although we use flush_work() to stop
the worker, it could be rescheduled in switch_timer(). As a result,
a use-after-free bug can occur. The details are shown below:
(cpu 0) | (cpu 1)
switch_drv_remove() |
flush_work() |
... | switch_timer // timer
| schedule_work(&psw->work)
timer_shutdown_sync() |
... | switch_work_handler // worker
kfree(psw) // free |
| psw->state = 0 // use
This patch puts timer_shutdown_sync() before flush_work() to
mitigate the bugs. As a result, the worker and timer will be
stopped safely before the deallocate operations.
Fixes:
|
|
![]() |
fb60211f37 |
sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory()
In all these cases, the last argument to dma_declare_coherent_memory() is the buffer end address, but the expected value should be the size of the reserved region. Fixes: |
|
![]() |
2a5a4326e5 |
SCSI misc on 20230909
Mostly small stragglers that missed the initial merge. Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat due to the volatile qualifier removal, fnic due to unused function removal and sd.c has a lot of code shuffling to remove forward declarations). Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZPyD4CYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZWGAQDlh/3q 5YJp7f8sIqmgdOiKl3bln3API9Y0MPsC3z5TsAEAv9LYQZH3He4XvxMy/v5FioEs 8IWIoBsUZtcgoK6mI4w= =8Aj8 -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull more SCSI updates from James Bottomley: "Mostly small stragglers that missed the initial merge. Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat due to the volatile qualifier removal, fnic due to unused function removal and sd.c has a lot of code shuffling to remove forward declarations)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits) scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD scsi: mpt3sas: Remove volatile qualifier scsi: mpt3sas: Perform additional retries if doorbell read returns 0 scsi: libsas: Simplify sas_queue_reset() and remove unused code scsi: ufs: Fix the build for the old ARM OABI scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt() scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag() scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport" scsi: fnic: Replace sgreset tag with max_tag_id scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs() scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error scsi: smartpqi: Change driver version to 2.1.24-046 scsi: smartpqi: Enhance error messages scsi: smartpqi: Enhance controller offline notification scsi: smartpqi: Enhance shutdown notification scsi: smartpqi: Simplify lun_number assignment scsi: smartpqi: Rename pciinfo to pci_info scsi: smartpqi: Rename MACRO to clarify purpose scsi: smartpqi: Add abort handler ... |
|
![]() |
6b41fb277e |
Driver symbol lookup fix for 6.6-rc1
Here is one last fixup for your tree for 6.6-rc1. It resolves a problem with the way that symbol_get was changed in the module tree merge in your tree to fix up the DVB drivers which rely on this old api to attach new devices. As the changelog comment says: In commit |
|
![]() |
474197a4f7 |
dma-mapping fixes for Linux 6.6
- move a dma-debug call that prints a message out from a lock that's causing problems with the lock order in serial drivers (Sergey Senozhatsky) - fix the CONFIG_DMA_NUMA_CMA Kconfig entry to have the right dependency on not default to y (Christoph Hellwig) - move an ifdef a bit to remove a __maybe_unused that seems to trip up some sensitivities (Christoph Hellwig) - revert a bogus check in the CMA allocator (Zhenhua Huang) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmT8MJ8LHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYOOyg/7BaZt4lih24cSFhXsU10wB49cKQuOngsT+4KFX7Eg 8LqdCK/L61M1VWm/1tcw6/XKK7oBDADIWnlutFTv1BHIaC0fjbFk0IpOQyWoXsYE vlCzm6Sh1rrryYK/dviLwC3+ccF33C5dzsZsKzeJ89v0cP//rENdOfXhwAIT2Wc7 FG/h0W7wWeQG4jHCz+DGhRp7X6r5urwW72KNap4BlBaDpZdAV9E5w1OeaplnENXt E7CK8rnHZz/AgH98LIMa929fgNhJ7Bec5mV9pItpBzYWAwL2iWk6k11FbAkxDiFQ MQ7gMnH5KRkCVpH/QILX1NU5ImsjdjyCUYn+2q8OJ5Y2C42K7V5ClspIgBCFk7XH AbCAGveoRUoQ3iCnQYZ0YPJOtyNSaUNB+q4NzwR/WFipiXGJBPflggI8gPzRiN8e 8SnKhduODklzLhOZZr7+nUEJpmwgR8aCkmhERZN/bw8iidBs/chiy9t1PfLmiOH9 R545BWEfsgpRikpEgb0HnuGD/zg26LcugLUilNbSZq0fzH4tkD5iCKKUitAITYLP ED0wDj9AdyQ98L6aSgAxc+9ip3eATFntM6hlg/16Ve4zdDTbFgucZpJhdSuVF8BI rq1VV3wztUm++zhkTFptK9eN2T+AQtpC+3XI6QyXpByADbX+m8GbQJm+r8V3hu5A X64= =AvYr -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.6-2023-09-09' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - move a dma-debug call that prints a message out from a lock that's causing problems with the lock order in serial drivers (Sergey Senozhatsky) - fix the CONFIG_DMA_NUMA_CMA Kconfig entry to have the right dependency and not default to y (Christoph Hellwig) - move an ifdef a bit to remove a __maybe_unused that seems to trip up some sensitivities (Christoph Hellwig) - revert a bogus check in the CMA allocator (Zhenhua Huang) * tag 'dma-mapping-6.6-2023-09-09' of git://git.infradead.org/users/hch/dma-mapping: Revert "dma-contiguous: check for memory region overlap" dma-pool: remove a __maybe_unused label in atomic_pool_expand dma-contiguous: fix the Kconfig entry for CONFIG_DMA_NUMA_CMA dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock |
|
![]() |
060249b5d3 |
pci-v6.6-fixes-1
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmT8goMUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vz2jxAAraKdqDFC7ARsslpG2KI4sUad/2S6 eMgEE4ud/yJzs8NbMKH0QZvnBo+TbTGoxakersX9MBU+FNSofll7BTdfURwV8pmx BhAycP9kFBljBFQAYEpxJ2pBIEqReq+58Fs9oHHgMg5WcJ9VvRecFnP6stXhH8Jd taFQ2vlYDMDFnF++nSIK9wvZzN7Ku+fng9ChdI2OZFqx8EX6XaDE3c/1LZP2vms7 SoaC8ZxI+66u1oo51XZz0QPWLVrKxaVRACtn02HbiQ7YLpfOK0zyPXUMwTpcOgng urwcd/pDZoOF8DPjhPd6UwJKGs15swupzNiyQKNSnReff8DpzA+SWVe3ntIX/NF4 AVscmLa/XntiiXHgeXtWXc6Ve7255eOQruy3tt0A5bmWGDWY1Ik+hpPC1yevZfYU 0DMrVZPNntSEmEKml4iPQptvEGAVcYFN0VCemcEunqcDFyUaCh7SkIoKL80rf/h8 bIbDHOGYYYmGH9AwOYgUcmwAYK154z99EvO45ptiXuC05wfw5X3JedO8S2YsK7Yx 6ZCzs/ZpvPpTxnvoDw59qVcZ1T6PR8BoExEYKUXuBfgYVivoGHHh/BNaRsKqc1F4 +FA/Yn2JrUoANNm1uyJv+z0zteXzOH/hIPxnPajH8Ojh2lCdniOBi8+SZgk7PUss k4CDTrVHH1eO73M= =MzOj -----END PGP SIGNATURE----- Merge tag 'pci-v6.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fixes from Bjorn Helgaas: - Add PCI_DYNAMIC_OF_NODES dependency on OF_IRQ to fix sparc64 build error (Lizhi Hou) - After coalescing host bridge resources, free any released resources to avoid a leak (Ross Lagerwall) - Revert a quirk that prevented NVIDIA T4 GPUs from using Secondary Bus Reset. The quirk worked around an issue that we now think is related to the Root Port, not the GPU (Bjorn Helgaas) * tag 'pci-v6.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset" PCI: Free released resource after coalescing PCI: Fix CONFIG_PCI_DYNAMIC_OF_NODES kconfig dependencies |
|
![]() |
fa9d4bf5b7 |
Link toggling fixes and debugfs error path fixes
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoE9b9c3U2JxX98mqbmZLrHqL0iMFAmTspXgACgkQbmZLrHqL 0iOD1hAAjQfLo8AmAKN0xWhr7+8HQjdSHgkqnOgeySDvWu40aWlSRRQ6bsuXoQ9G TGNX6Emqsgc6CcZ63x5yeerLMudaaSliRSDdcN3HUTmnnqSl/mDteBIsYRpsjpA8 hl7qZU377N8WRTglQjvta62jVp/o67EJxQGqhQiI4Yi9GY0KLB8Pn6ta8A0S2x5A C8RHUv7O7006Ox64uYP9Woes469oltPvkU2RiDnGoaZ3055SFkoylB1yflpK74JM fipTM6Y4ciiEbEJT8H1gIYd8qVEDHn4r7QLA2m9oZo1/uhDErVCKMS7sOmHvphfP aBXpPv5H4f9wQ6MXuFlZWFmbQXzVdYcL6eje24rcYNSGNLbjl92FqmZoH8wU5MUB JXuQdJ6+eDMyue78n9XOurBbTVUSq+KIeSpWktheBujNiBEgQ08O4Nr8TBJsPttR vcBqX+QcK0ivTgtWRojVyd3rlJcyHFbhaOk4x+5Og1VlLyi+dkfbcOiKpaMTZyIs cw7aLhK4mlUfL26U/bPLSFo7PmWaNO/UaialtykqG+9mELW2WiobBKEHCXUw7xs2 TuFkRDv42w3DpKPm2cr93wbxbcoBFpOZMcX1CgYKBOGVon2UZDs26Jtvm8yj//Px nkqDRwYWFVJVF/3RIq0dGW24GbNH7Y5IK4OEqr+Cd71U7lyTjMA= =rOGo -----END PGP SIGNATURE----- Merge tag 'ntb-6.6' of https://github.com/jonmason/ntb Pull NTB updates from Jon Mason: "Link toggling fixes and debugfs error path fixes" [ And for everybody like me who always have to remind themselves what the TLA of the day is, and what NTB stands for - it's a PCIe "Non-Transparent Bridge" thing - Linus ] * tag 'ntb-6.6' of https://github.com/jonmason/ntb: ntb: Check tx descriptors outstanding instead of head/tail for tx queue ntb: Fix calculation ntb_transport_tx_free_entry() ntb: Drop packets when qp link is down ntb: Clean up tx tail index on link down ntb: amd: Drop unnecessary error check for debugfs_create_dir NTB: ntb_tool: Switch to memdup_user_nul() helper dtivers: ntb: fix parameter check in perf_setup_dbgfs() ntb: Remove error checking for debugfs_create_dir() |
|
![]() |
5d153cd128 |
spnego: add missing OID to oid registry
Add missing OID to the registry. Some servers and clients (including Windows) now request "NEGOEX - SPNEGEO Extended Negotiation Security") See https://datatracker.ietf.org/doc/html/draft-zhu-negoex-02 Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
|
![]() |
86495af117 |
media: dvb: symbol fixup for dvb_attach()
In commit |