Freescale PCIe controllers on their PCIe Root Ports do not have any
mappable PCI BAR allocate from PCIe MEM.
Information about 1MB window on BAR0 of PCIe Root Port was misleading
because Freescale PCIe controllers have at BAR0 position different register
PEXCSRBAR, and kernel correctly skipts BAR0 for these Freescale PCIe Root
Ports.
So update comment about P2020 PCIe Root Port and decrease PCIe MEM size
required for PCIe controller (pci2 node) on which is on-board xHCI
controller.
lspci confirms that on P2020 PCIe Root Port is no PCI BAR and /proc/iomem
sees that only c0000000-c000ffff and c0010000-c0011fff ranges are used.
Fixes: 54c15ec3b7 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505172818.18416-1-pali@kernel.org
The MPC8541/8548/8555 Configurable Development System (CDS) were the
vehicle used to provide evaluation of the 1st e500-v2 CPUs around 2007.
Similar to the earlier MPC83xx-MDS systems we removed, the "brains"
exist on a PCI-X card, but additional connectors exist to the right of
the PCI-X slot, two structural metal pins are used to provide stability
in a vertical ATX mounting, and the CPU is now on a daughter-card vs. a
clamped down BGA.
Given the extra complexity and risk of connector damage, the 8548CDS
I had access to came pre-assembled in a basic white Antec case common
for that era, and I'm inclined to assume that was the default.
Power was typical "Pentium4" 2005 ATX - the main 20 pin connector went
to the PCI ATX form factor backplane, and the 4 pin black/yellow went
to the CPU card.
Like previous evaluation boards, they attempted to provide break-out
connectors for as many features as possible, and that made for a fairly
complex looking system.
In any case, these are over 15 years old, and fairly complex systems,
originally made for a small group of industry related people, and made
for use where quiet fan operation wasn't important. Given that, it
makes sense to remove support from them in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-3-paul.gortmaker@windriver.com
Based on the revision history in the manual(s), these e500-v1
platforms were first available around 2002.
Like a lot of evaluation boards, they attempted to provide break-out
connectors for all possible features, and that combined with four
PCI-X slots (and the age/era) meant for a considerably large board.
As I recall it, from a Linux point of view, the biggest difference
between 8540 and 8560 was in the UART implementation, and that is
reflected in a diff of the defconfigs.
In any case, these are over 20 years old, and by today's standards
only have a small amount of DDR1 memory, and were not widely available.
Given that, it makes sense to remove support from them in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-2-paul.gortmaker@windriver.com
Based on documentation revision dates, this MPC82xx pq2fads system
predates the MPC8272-ADS variant by about a year and only has 1/2
the amount of RAM (32MB) -- largely making it useless with a modern
v6.x kernel from today.
Similar to the MPC8272-ADS the pq2fads also supported other 82xx CPU
variants, had 8MB flash, and like the 8272 ADS platform, was on a fairly
large PCB in order to have space for breakout connectors for all features.
These 82xx platforms are two decades old, and originally made for a
small group of industry related people in order to assist in new OEM
board designs. Given that, it makes sense to remove support today.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230224204959.17425-3-paul.gortmaker@windriver.com
The MPC8272-ADS also supported other 82xx CPU variants, had 64MB RAM,
8MB flash, and like the 85xx ADS platforms, was on a fairly large PCB
in order to have space for breakout connectors for all the features.
These 82xx platforms are two decades old, and originally made for a
small group of industry related people in order to assist in new OEM
board designs. Given that, it makes sense to remove support today.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230224204959.17425-2-paul.gortmaker@windriver.com
This evaluation platform was essentially a single core 8641 with
integrated graphics/display support - in an effort to reduce chip count
on kiosk and similar applications.
Compared to other evaluation platforms considered for removal in other
recent commits, this platform was relatively rare. Unlike all the other
10+ platforms, I couldn't find any documentation on it - just a link to
downloading the 2007 era BSP in "LTIB" format as was done back then.
With all that in mind, it seems prudent to remove it here in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
[mpe: Drop stale reference to MPC8610_HPCD in 86xx/Kconfig]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230225201318.3682-4-paul.gortmaker@windriver.com
There is no denying that this was an interesting platform in its day.
Access to a SMP powerpc platform became a bit more obtainable for folks
in the BSP industry in the 2007 era, thanks to this platform.
Add to that the move to the black Antec case vs. the generic white 2005
era case of the MPC8548CDS or the retro 1950s 1/2 height horizontal case
of the HPC II, and it was pretty interesting to people like myself then.
However, like all the other evaluation platforms, the overall system
was complex out of necessity, as it tried to showcase all possible
features and use-cases. That included an AMP option, where you could run
two bootloaders and two kernels over two serial consoles. Peripheral
sharing got a bit more tricky when you got to the hard disk and similar.
In any case we still have the same circumstance. A relatively rare and
expensive evaluation platform that is now 15+ years old and not out there
in large numbers in the general public. Removal in 2023 just makes sense.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230225201318.3682-3-paul.gortmaker@windriver.com
This was an interesting platform - it was the 1st instance of a
respin of earlier 130nm 74xx CPUs on 90nm and systems using MPC7448
were positioned as a rack server platform solution.
Given that, the evaluation platform (at least the one I had) was shipped
in a horizontal 1/2 height Antec desktop case with retro styling and
colours, despite the fact the docs explicitly stated that the HPC II is
not a desktop machine (noting it had no gfx or legacy PC I/O support).
Historic trivia aside, this was the 1st introduction of the e600
procfam as an evolution from the earlier G4.
However even with the claim to being "1st e600" it seems the 2005+
era was turning its attention to multicore support and from my memory
this poor guy was quickly overshadowed by the dual core MPC8641D.
All that aside, we are once again looking at 15+ year old evaluation
platforms that were not widely distributed, so 2023 removal makes sense.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230225201318.3682-2-paul.gortmaker@windriver.com
This final variant in the e300 family of Modular Development System
(MDS) in this series was actually aimed at feature reduction - things
like floating point and ethernet were removed in order to make for a
lower power and lower cost system.
Like all the MDS systems, it was meant as a vehicle to get the CPU out
early to hardware OEMs so software and board development could take place
in parallel.
These were made in limited numbers and availability preference was given
to partners who were planning to make their own boards.
Given that the whole reason for existence was to assist in enabling new
board designs [not happening for 10+ years], and that they weren't
generally available, and that the hardware wasn't really hobbyist friendly
even for retro computing, it makes sense to retire the support for this
particular platform.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
[mpe: Drop stale reference to MPC832x_MDS in arch/powerpc/boot/Makefile]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220115913.25811-5-paul.gortmaker@windriver.com
This next evolutionary step in the e300 family of Modular Development
System (MDS) still has, at its core component, a full length card with a
PCI edge. No case. Serial and network connectors were on card, so it
could optionally be fitted with plastic stand-offs and run stand-alone
off a power brick.
This is very similar to the MPC834x_MDS and MPC836x_MDS removed in the
prior commits, but with this board variant as yet another evolutionary
step. SATA and PCI-e were now available. But overall the form factor
and design goals were unchanged.
Like all the MDS systems, it was meant as a vehicle to get the CPU out
early to hardware OEMs so software and board development could take place
in parallel.
These were made in limited numbers and availability preference was given
to partners who were planning to make their own boards.
Given that the whole reason for existence was to assist in enabling new
board designs [not happening for 10+ years], and that they weren't
generally available, and that the hardware wasn't really hobbyist friendly
even for retro computing, it makes sense to retire the support for this
particular platform.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220115913.25811-4-paul.gortmaker@windriver.com
This 2006 era Modular Development System (MDS) has, at its core component,
a full length card with a PCI edge. No case. Serial and network
connectors were on card, so it could optionally be fitted with plastic
stand-offs and run stand-alone off a power brick.
This is very similar to the MPC834x_MDS removed in the prior commit, but
with this board variant as an evolutionary step. DDR2 was now an option,
and the card edge was revised down to PCI-32 as PCI-64 never got traction.
But overall the form factor and design goals were unchanged.
Like all the MDS systems, it was meant as a vehicle to get the CPU out
early to hardware OEMs so software and board development could take place
in parallel.
To that end, the BGA CPU was held in place with a mechanical spring loaded
pressure assembly (vs. solder) so that early rev silicon could be replaced
in the field. Not for COTS deployment!
These were made in limited numbers and availability preference was given
to partners who were planning to make their own boards.
Given that the whole reason for existence was to assist in enabling new
board designs [not happening for 10+ years], and that they weren't
generally available, and that the hardware wasn't really hobbyist friendly
even for retro computing, it makes sense to retire the support for this
particular platform.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
[mpe: Drop stale reference to MPC836x_MDS in arch/powerpc/boot/Makefile]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220115913.25811-3-paul.gortmaker@windriver.com
This 2006 era Modular Development System (MDS) has, at its core
component, a full length card with a PCI-64 edge. No case. Serial
and network connectors were on card, so it could optionally be fitted
with plastic stand-offs and run stand-alone off a power brick.
Like all the MDS systems, it was meant as a vehicle to get the CPU
out early to hardware OEMs so software and board development could
take place in parallel.
To that end, the BGA CPU was held in place with a mechanical spring
loaded pressure assembly (vs. solder) so that early rev silicon could
be replaced in the field. Not for COTS deployment!
These were made in limited numbers and availability preference was
given to partners who were planning to make their own boards, like
our WR SBC8349 [since retired in v4.18 (2017, commit 3bc6cf5a86)]
Given that the whole reason for existence was to assist in enabling
new board designs [not happening for 10+ years], and that they weren't
generally available, and that the hardware wasn't really hobbyist
friendly even for retro computing, it makes sense to retire the
support for this platform.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220115913.25811-2-paul.gortmaker@windriver.com
"fsl,P2020RDB-PC" compatible string was present in Turris 1.x DTS file just
because Linux kernel required it for proper detection of P2020 processor
during boot.
This was quite a hack as CZ.NIC Turris 1.x is not compatible with
Freescale P2020-RDB-PC board.
Now when kernel has generic unified support for boards with P2020
processors, there is no need to have this "hack" in turris1x.dts file.
So remove incorrect "fsl,P2020RDB-PC" compatible string from turris1x.dts.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-14-pali@kernel.org
Since commit eca70102cf ("net: dsa: felix: add support for changing
DSA master") included in kernel v6.1, the driver supports 2 CPU ports,
and they can be put in a LAG, for example (see
Documentation/networking/dsa/configuration.rst for more details).
Defining the second CPU port in the device tree should not cause any
compatibility issue, because the default CPU port was &seville_port8
before this change, and still is &seville_port8 now (the numerically
first CPU port is used by default).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It looks like U-Boot fails to start the kernel properly when the
compatible string of the board isn't fsl,T1040RDB, so stop overriding it
from the rev-a.dts.
Fixes: 5ebb747492 ("powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Support for configuring secure boot with user-defined keys on PowerVM LPARs.
- Simplify the replay of soft-masked IRQs by making it non-recursive.
- Add support for KCSAN on 64-bit Book3S.
- Improvements to the API & code which interacts with RTAS (pseries firmware).
- Change 32-bit powermac to assign PCI bus numbers per domain by default.
- Some improvements to the 32-bit BPF JIT.
- Various other small features and fixes.
Thanks to: Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin Gray, Christophe
Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict
Glaw, Josh Poimboeuf, Kajol Jain, Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers,
Mimi Zohar, Murphy Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin,
Pali Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika Vasireddy,
Sourabh Jain, Stefan Berger, Stephen Rothwell, Sudhakar Kuppusamy.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmP4GnkTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgEnlEAC9UoE9JM853o9ZzpOJDrbYknHsRQad
ztQJ9xu5qjkFHHryTmWKYdiAtNDFbcfn7+1aoc5FXrIb6BOfvBo/uRFw6P501Qwv
Fg0MQyWUnT5WrI7+rBE2q+1+FaHBNKLycLNRSh5JpXtuKe2ubQfiFD80tarBnEnU
6I4bqXd+xjDtnqtpfiYnil/kdZTu/MzntdkmCne6fMkflgEQFU9EVQEnnE+imqFa
6BuCwITvZ+NyaaU+cYMeGZT7aoz9PAwkksgTxXW2gQbTIApX9WX4kYU/vbW4aHts
0bpzMmIbSbAklYIu2PQQhSU0bLfKJ+xly8E8tozHgRX6hrFlqvtmD/T5LHTBD11f
FFzKb0NUCD8qTIy6Hn0M1tj5egLpxxzATPe/kVTkxxqTlZrzdSEaqzft6syyJHJd
ueo0QN53AUyBaVMtxLbnB/U/8Vnz6rLqY+8dLKzXhjYjoPJqOZh/Qlc1Tk3syPwf
E2j4H6wFqGMTOGi453Pijkpj3qpNkNT79FG5DmClcQLJxD/EXDyffLZITrkzQa0S
FEkcMzz/Hn9Hkf7ZuNo4DN6ss6IF0vlxoi7GNr+MRR53/aVQJUDc8z24c4ICl/3w
20ETk57XMVJzP++Hb+yn16JyAawfQOOlckBRZ2O8W5YYVoes45hxDQxVoh8EII69
hb3KOGYEqF5wyA==
=ECNb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for configuring secure boot with user-defined keys on PowerVM
LPARs
- Simplify the replay of soft-masked IRQs by making it non-recursive
- Add support for KCSAN on 64-bit Book3S
- Improvements to the API & code which interacts with RTAS (pseries
firmware)
- Change 32-bit powermac to assign PCI bus numbers per domain by
default
- Some improvements to the 32-bit BPF JIT
- Various other small features and fixes
Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin
Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand,
Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain,
Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy
Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali
Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika
Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar
Kuppusamy.
* tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits)
powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries
powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot
powerpc/e500: Add missing prototype for 'relocate_init'
powerpc/64: Fix unannotated intra-function call warning
powerpc/epapr: Don't use wrteei on non booke
powerpc: Pass correct CPU reference to assembler
powerpc/mm: Rearrange if-else block to avoid clang warning
powerpc/nohash: Fix build with llvm-as
powerpc/nohash: Fix build error with binutils >= 2.38
powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags
macintosh: windfarm: Use unsigned type for 1-bit bitfields
powerpc/kexec_file: print error string on usable memory property update failure
powerpc/machdep: warn when machine_is() used too early
powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500
powerpc/eeh: Set channel state after notifying the drivers
selftests/powerpc: Fix incorrect kernel headers search path
powerpc/rtas: arch-wide function token lookup conversions
powerpc/rtas: introduce rtas_function_token() API
powerpc/pseries/lpar: convert to papr_sysparm API
powerpc/pseries/hv-24x7: convert to papr_sysparm API
...
Due to CPLD firmware bugs, set CPLD syscon-reboot priority level to 64
(between rstcr and watchdog) to ensure that rstcr's global-utilities reset
method which is preferred stay as default one, and to ensure that CPLD
syscon-reboot is more preferred than watchdog reset method.
Fixes: 0531a4abd1 ("powerpc: dts: turris1x.dts: Add CPLD reboot node")
Depends-on: e6333293f2 ("power: reset: syscon-reboot: Add support for specifying priority")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230220080435.4237-1-pali@kernel.org
There aren't enough resources to run these ports at 10G speeds. Disable
10G for these ports, reverting to the previous speed.
Fixes: 36926a7d70 ("powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G")
Reported-by: Camelia Alexandra Groza <camelia.groza@nxp.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Camelia Groza <camelia.groza@nxp.com>
Link: https://lore.kernel.org/r/20221216172937.2960054-1-sean.anderson@seco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add powerpc qspinlock implementation optimised for large system scalability and
paravirt. See the merge message for more details.
- Enable objtool to be built on powerpc to generate mcount locations.
- Use a temporary mm for code patching with the Radix MMU, so the writable mapping is
restricted to the patching CPU.
- Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI.
- Sanitise user registers on interrupt entry on 64-bit Book3S.
- Many other small features and fixes.
Thanks to: Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen
Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin
Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven,
Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain,
Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao,
Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure,
Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang
Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, Wolfram Sang.
-----BEGIN PGP SIGNATURE-----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=7k3p
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add powerpc qspinlock implementation optimised for large system
scalability and paravirt. See the merge message for more details
- Enable objtool to be built on powerpc to generate mcount locations
- Use a temporary mm for code patching with the Radix MMU, so the
writable mapping is restricted to the patching CPU
- Add an option to build the 64-bit big-endian kernel with the ELFv2
ABI
- Sanitise user registers on interrupt entry on 64-bit Book3S
- Many other small features and fixes
Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.
* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
powerpc/code-patching: Fix oops with DEBUG_VM enabled
powerpc/qspinlock: Fix 32-bit build
powerpc/prom: Fix 32-bit build
powerpc/rtas: mandate RTAS syscall filtering
powerpc/rtas: define pr_fmt and convert printk call sites
powerpc/rtas: clean up includes
powerpc/rtas: clean up rtas_error_log_max initialization
powerpc/pseries/eeh: use correct API for error log size
powerpc/rtas: avoid scheduling in rtas_os_term()
powerpc/rtas: avoid device tree lookups in rtas_os_term()
powerpc/rtasd: use correct OF API for event scan rate
powerpc/rtas: document rtas_call()
powerpc/pseries: unregister VPA when hot unplugging a CPU
powerpc/pseries: reset the RCU watchdogs after a LPM
powerpc: Take in account addition CPU node when building kexec FDT
powerpc: export the CPU node count
powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
powerpc/dts/fsl: Fix pca954x i2c-mux node names
cxl: Remove unnecessary cxl_pci_window_alignment()
selftests/powerpc: Fix resource leaks
...
"make dtbs_check":
arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dtb: pca9546@77: $nodename:0: 'pca9546@77' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/powerpc/boot/dts/fsl/t1024qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@2', 'i2c@3' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming pca954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6c5d86c49ac170e9d56ab121ea0602f3873849ca.1669999298.git.geert+renesas@glider.be
Channel 0 of SA56004ED chip refers to internal SA56004ED chip sensor (chip
itself is located on the board) and channel 1 of SA56004ED chip refers to
external sensor which is connected to temperature diode of the P2020 CPU.
Fixes: 54c15ec3b7 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930123901.10251-1-pali@kernel.org
This is the register layout of the litesd peripheral for the fusesoc
based Microwatt SoC.
It requires a description of the system clock, which is hardcoded to
100MHz.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930065012.2860577-1-joel@jms.id.au
This switches PIKA Warp away from legacy gpio API and to newer gpiod
API, so that we can eventually deprecate the former.
Because LEDs are normally driven by leds-gpio driver, but the
platform code also wants to access the LEDs during thermal shutdown,
and gpiod API does not allow locating GPIO without requesting it,
the platform code is now responsible for locating GPIOs through device
tree and requesting them. It then constructs platform data for
leds-gpio platform device and registers it. This allows platform
code to retain access to LED GPIO descriptors and use them when needed.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YzKSLcrYmV5kjyeX@google.com
Now that we actually read registers from QSGMII PCSs, it's important
that we have the correct address (instead of hoping that we're the MAC
with all the QSGMII PCSs on its bus). This adds nodes for the QSGMII
PCSs. They have the same addresses on all SoCs (e.g. if QSGMIIA is
present it's used for MACs 1 through 4).
Since the first QSGMII PCSs share an address with the SGMII and XFI
PCSs, we only add new nodes for PCSs 2-4. This avoids address conflicts
on the bus.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC dtsi
fragments, and mark the QMAN ports as 10G.
Fixes: da414bb923 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are still some board device tree files without Power ISA properties
which have Freescale e500v1 cores, namely those which are based on
Freescale mpc8540, mpc8541, mpc8555 and mpc8560 processors.
So include newly introduced e500v1_power_isa.dtsi file in devices tree
files with those processors.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902212103.22534-2-pali@kernel.org
Commit 2eb2800643 ("powerpc/e500v2: Add Power ISA properties to comply
with ePAPR 1.1") introduced new include file e500v2_power_isa.dtsi and
should have used it for all e500v2 platforms. But apparently it was used
also for e500v1 platforms mpc8540, mpc8541, mpc8555 and mpc8560.
e500v1 cores compared to e500v2 do not support double precision floating
point SPE instructions. Hence power-isa-sp.fd should not be set on e500v1
platforms, which is in e500v2_power_isa.dtsi include file.
Fix this issue by introducing a new e500v1_power_isa.dtsi include file and
use it in all e500v1 device tree files.
Fixes: 2eb2800643 ("powerpc/e500v2: Add Power ISA properties to comply with ePAPR 1.1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902212103.22534-1-pali@kernel.org
DSA cpu port node has to be marked with "cpu" label.
So fix it for both cpu port nodes.
Fixes: 54c15ec3b7 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220827131538.14577-1-pali@kernel.org
Partition partition@20000 contains generic kernel image and it does not
have to be used only for rescue purposes. Partition partition@1c0000
contains bootable rescue system and partition partition@340000 contains
factory image/data for restoring to NAND. So change partition labels to
better fit their purpose by removing possible misleading substring "rootfs"
from these labels.
Fixes: 54c15ec3b7 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220830225500.8856-1-pali@kernel.org
Commit 956b200a84 ("spi: spidev: Warn loudly if instantiated from DT
as "spidev"") states that there should not be spidev nodes in DTs.
Remove this non-HW description. There won't be a regression because it
won't bind since 2015 anyhow.
Fixes: 5d1d67e361 ("powerpc/82xx: add SPI support for mgcoge")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220824082130.21934-3-wsa+renesas@sang-engineering.com
DT law_trgt_if property defines Local Access Window Target Interface.
Local Access Window Target Interface is used for identifying individual
peripheral and mapping its memory to CPU. Interface id is defined by
hardware itself.
U-Boot uses law_trgt_if DT property in PCIe nodes for configuring memory
mapping of individual PCIe controllers.
Linux kernel fsl_pci.c driver currently does not touch Local Access Window
and expects that U-Boot configures it properly.
Add law_trgt_if property to PCIe DT nodes for P2020. This allows usage of
kernel P2020 PCIe DT nodes in U-Boot. And therefore allows to share P2020
DTS files between Linux kernel and U-Boot.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220504180822.29782-1-pali@kernel.org
CPLD firmware can reset board by writing value 0x01 at CPLD memory offset
0x0d. Define syscon-reboot node for this reset support.
Fixes: 54c15ec3b7 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713134429.18748-1-pali@kernel.org
In commit 5402e239d0 ("powerpc/64s: Get LPID bit width from device
tree") the kernel tried to determine the pid and lpid bits from the
device tree. If they are not found, there is a fallback, but Microwatt
wasn't covered as it has the unusual configuration of being both !HV and
bare metal.
Set the values in the device tree to avoid having to add a special case.
The lpid value is the only one required, but add both for completeness.
Fixes: 5402e239d0 ("powerpc/64s: Get LPID bit width from device tree")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220519125706.593532-1-joel@jms.id.au
P2020 also contains Power Management Controller and their registers at
offset 0xe0070 compatible with mpc8548. So add PMC node into DTS include
file fsl/p2020si-post.dtsi
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220506203621.26314-1-pali@kernel.org
On board rev A, the network interface labels for the switch ports
written on the front panel are different than on rev B and later.
This patch fixes network interface names for the switch ports according
to labels that are written on the front panel of the board rev B.
They start from ETH3 and end at ETH10.
This patch also introduces a separate device tree for rev A.
The main device tree is supposed to cover rev B and later.
Fixes: e69eb0824d ("powerpc: dts: t1040rdb: add ports for Seville Ethernet switch")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220121091447.3412907-1-bigunclemax@gmail.com
The unit-address for the Maxim MAX1237 ADCs on XPedite5200 boards don't
match the value in the "reg" property and cause a DTC warning.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211220134036.683309-1-thierry.reding@gmail.com
T1040RDB has two RTL8211E-VB phys which requires setting
of internal delays for correct work.
Changing the phy-connection-type property to `rgmii-id`
will fix this issue.
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com
New driver:
- Sunplus SP7021 RTC
- Nintendo GameCube, Wii and Wii U RTC
Drivers:
- cmos: refactor UIP handling and presence check, fix century
- rs5c372: offset correction support, report low voltage
- rv8803: Epson RX8804 support
-----BEGIN PGP SIGNATURE-----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=nwD6
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Two new drivers this cycle and a significant rework of the CMOS driver
make the bulk of the changes.
I also carry powerpc changes with the agreement of Michael.
New drivers:
- Sunplus SP7021 RTC
- Nintendo GameCube, Wii and Wii U RTC
Driver updates:
- cmos: refactor UIP handling and presence check, fix century
- rs5c372: offset correction support, report low voltage
- rv8803: Epson RX8804 support"
* tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: sunplus: fix return value in sp_rtc_probe()
rtc: cmos: Evaluate century appropriate
rtc: gamecube: Fix an IS_ERR() vs NULL check
rtc: mc146818-lib: fix signedness bug in mc146818_get_time()
dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers
rtc: pxa: fix null pointer dereference
rtc: ftrtc010: Use platform_get_irq() to get the interrupt
rtc: Move variable into switch case statement
rtc: pcf2127: Fix typo in comment
dt-bindings: rtc: Add Sunplus RTC json-schema
rtc: Add driver for RTC in Sunplus SP7021
rtc: rs5c372: fix incorrect oscillation value on r2221tl
rtc: rs5c372: add offset correction support
rtc: cmos: avoid UIP when writing alarm time
rtc: cmos: avoid UIP when reading alarm time
rtc: mc146818-lib: refactor mc146818_does_rtc_work
rtc: mc146818-lib: refactor mc146818_get_time
rtc: mc146818-lib: extract mc146818_avoid_UIP
rtc: mc146818-lib: fix RTC presence check
rtc: Check return value from mc146818_get_time()
...
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers,
read the right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XM4Y
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf.
Quite a handful of old regression fixes but most of those are
pre-5.16.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers, read the
right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885"
* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
ipv4: avoid quadratic behavior in netns dismantle
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
dt-bindings: net: Document fsl,erratum-a009885
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
net: mscc: ocelot: fix using match before it is set
net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
net: axienet: increase default TX ring size to 128
net: axienet: fix for TX busy handling
net: axienet: fix number of TX ring slots for available check
net: axienet: Fix TX ring slot available check
net: axienet: limit minimum TX ring size
net: axienet: add missing memory barriers
net: axienet: reset core on initialization prior to MDIO access
net: axienet: Wait for PhyRstCmplt after core reset
net: axienet: increase reset timeout
bpf, selftests: Add ringbuf memory type confusion test
...
This block is used in (at least) T1024 and T1040, including their
variants like T1023 etc.
Fixes: d55ad2967d ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess flushes on Power10
or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie. Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated assembler.
- Many other small features and fixes.
Thanks to: Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell, Arnd Bergmann,
Athira Rajeev, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christoph Hellwig,
Daniel Axtens, David Yang, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren,
Hari Bathini, Jason Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent
Dufour, Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh Kamboju,
Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child, Oliver O'Halloran, Peiwei
Hu, Randy Dunlap, Ravi Bangoria, Rob Herring, Russell Currey, Sachin Sant, Sean
Christopherson, Segher Boessenkool, Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang
wangx, Yang Guang.
-----BEGIN PGP SIGNATURE-----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=BxhQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess
flushes on Power10 or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie.
Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them
on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated
assembler.
- Many other small features and fixes.
Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell,
Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard
Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason
Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour,
Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh
Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child,
Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring,
Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool,
Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang
Guang.
* tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits)
powerpc/xmon: Dump XIVE information for online-only processors.
powerpc/opal: use default_groups in kobj_type
powerpc/cacheinfo: use default_groups in kobj_type
powerpc/sched: Remove unused TASK_SIZE_OF
powerpc/xive: Add missing null check after calling kmalloc
powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API
selftests/powerpc: Add a test of sigreturning to an unaligned address
powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings
powerpc/64s: Mask NIP before checking against SRR0
powerpc/perf: Fix spelling of "its"
powerpc/32: Fix boot failure with GCC latent entropy plugin
powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests
powerpc/code-patching: Move code patching selftests in its own file
powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h
powerpc/code-patching: Move patch_exception() outside code-patching.c
powerpc/code-patching: Use test_trampoline for prefixed patch test
powerpc/code-patching: Fix patch_branch() return on out-of-range failure
powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling
powerpc/code-patching: Fix unmap_patch_area() error handling
powerpc/code-patching: Fix error handling in do_patch_instruction()
...
"spidev" is not a real device, but a Linux implementation detail. It has
never been documented either. The kernel has WARNed on the use of it for
over 6 years. Time to remove its usage from the tree.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211217221400.3667133-1-robh@kernel.org
Finish the work by removing all references to the PPC4xx_MSI config
and the associated device nodes in the DTs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/e92f2bb3-b5e1-c870-8151-3917a789a640@kaod.org
- Enable STRICT_KERNEL_RWX for Freescale 85xx platforms.
- Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it to be disabled.
- Add support for out-of-line static calls on 32-bit.
- Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled.
- Fix boot hangs on e5500 due to stale value in ESR passed to do_page_fault().
- Fix several bugs on pseries in handling of device tree cache information for hotplugged
CPUs, and/or during partition migration.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin, Andrew Donnellan,
Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le Goater, Christophe Leroy, Daniel
Axtens, Daniel Henrique Barboza, Denis Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo
A. R. Silva, Hari Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent
Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Naveen N.
Rao, Nicholas Piggin, Nick Desaulniers, Niklas Schnelle, Oliver O'Halloran, Rob Herring,
Russell Currey, Srikar Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant
Hegde, Wan Jiabing, Xiaoming Ni,
-----BEGIN PGP SIGNATURE-----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=f7HE
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable STRICT_KERNEL_RWX for Freescale 85xx platforms.
- Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it
to be disabled.
- Add support for out-of-line static calls on 32-bit.
- Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled.
- Fix boot hangs on e5500 due to stale value in ESR passed to
do_page_fault().
- Fix several bugs on pseries in handling of device tree cache
information for hotplugged CPUs, and/or during partition migration.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin,
Andrew Donnellan, Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le
Goater, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Denis
Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo A. R. Silva, Hari
Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent
Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Niklas
Schnelle, Oliver O'Halloran, Rob Herring, Russell Currey, Srikar
Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant
Hegde, Wan Jiabing, and Xiaoming Ni,
* tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (73 commits)
powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST
powerpc/32e: Ignore ESR in instruction storage interrupt handler
powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload
powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC
MAINTAINERS: Update powerpc KVM entry
powerpc/xmon: fix task state output
powerpc/44x/fsp2: add missing of_node_put
powerpc/dcr: Use cmplwi instead of 3-argument cmpli
KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling
powerpc/security: Use a mutex for interrupt exit code patching
powerpc/83xx/mpc8349emitx: Make mcu_gpiochip_remove() return void
powerpc/fsl_booke: Fix setting of exec flag when setting TLBCAMs
powerpc/book3e: Fix set_memory_x() and set_memory_nx()
powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect()
powerpc/bpf: Fix write protecting JIT code
selftests/powerpc: Use date instead of EPOCHSECONDS in mitigation-patching.sh
powerpc/64s/interrupt: Fix check_return_regs_valid() false positive
powerpc/boot: Set LC_ALL=C in wrapper script
powerpc/64s: Default to 64K pages for 64 bit book3s
Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC"
...
Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de
Krzysztof Kozlowski